SDHT09T3AZN-G88 WXN15 WXN15 Wendeplatten - Walter Tools

Benefit from the combination of a sharp, uncoated carbide grade and a proven chipbreaker geometry for efficient, low‑adhesion machining of non‑ferrous alloys; order the SDHT09T3AZN‑G88 WXN15 milling insert directly via Metav Werkzeuge or contact our advisors for application advice.

SDHT09T3AZN‑G88 WXN15 — milling insert, square 90° form, for non‑ferrous metals by Walter Tools

A SDHT09T3AZN‑G88 WXN15 milling insert designed for sharp, uncoated cutting in high‑productivity milling of non‑ferrous metals such as aluminium, copper and brass.

• Square 90° form for stable indexing
• Sharp uncoated carbide grade WXN15
• 15° clearance angle for clean shearing
• G88 chipbreaker for non‑ferrous materials

Precision performance for non‑ferrous production

The insert delivers reliable chip control and consistent results in machining non‑ferrous alloys. Its WXN15 uncoated carbide composition provides the sharp edge geometry required for minimal material adhesion, which is critical when working with aluminium, copper or brass. The G88 chipbreaker reduces folding and built‑up edge formation, so cycle times remain predictable and surface finish quality improves. For production environments where tool indexing and repeatability matter, the square 90° form contributes to stable clamping and repeatable positioning, supporting fast tool changes and consistent component tolerances.

Efficient cutting geometry that reduces rework

With a 15° clearance angle and a compact plate thickness of T3, the geometry is optimised to produce clean shear in soft, ductile materials while limiting heat generation at the cutting zone. The sharp, uncoated cutting edge is particularly suited to finishing and semi‑finishing passes where burr formation must be minimised. Integrating this grade into machining routines often reduces downstream deburring and inspection time, improving overall throughput. Where finishing standards are tight, the combination of the chipbreaker design and the sharp edge helps maintain surface integrity across repeated tool indexes.

Practical integration and predictable handling in milling systems

Belonging to the Walter N‑Sortensystem, the insert matches common pocket designs for square 90° plates and is available in the SDHT09T3AZN‑G88 designation for straightforward identification within tool inventories. The tolerance class H ensures consistent dimensional compliance for high‑precision setups. Using an insert with a proven chip control geometry simplifies process planning: feeds and speeds can be tuned to favour material evacuation rather than excessive cutting force, reducing the risk of tool vibration and improving tool life. For workshops aiming for reproducible results on non‑ferrous workpieces, this insert supports a measurable rise in process stability.

For machining non‑ferrous alloys with confidence, contact Metav Werkzeuge to check availability of the SDHT09T3AZN‑G88 WXN15 insert or to request specific application guidance — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930

Technical data

• Article number: SDHT09T3AZN-G88-WXN15-WALTER
• Name: SDHT09T3AZN‑G88 WXN15
• Manufacturer: Walter Tools
• Product type: milling insert

Facts

• Free angle: 15°
• Shape: Square 90°
• Size: 09
• Thickness: T3
• Tolerance class: H

Special features

• Series: Walter N‑Sortensystem
• Grade: WXN15 (uncoated carbide)
• Chipbreaker: G88
• Application: Non‑ferrous metals (aluminium, copper, brass)
• Execution: T

FAQ

Is this insert suitable for aluminium milling operations?
The SDHT09T3AZN‑G88 WXN15 insert is designed expressly for non‑ferrous metals and is well suited to aluminium machining thanks to its sharp, uncoated carbide grade and G88 chipbreaker.

Can the insert handle brass and copper components?
Yes, the WXN15 grade and the G88 chip control geometry are intended to minimise adhesion when machining brass and copper, supporting improved surface finish and fewer tool‑related marks.

What are the key geometric advantages of the plate?
The square 90° form and 15° clearance angle combine to provide stable indexability and clean shearing action, which reduces burr formation and enhances repeatability in serial machining.

How is the insert identified for inventory and tool planning?
The product appears as SDHT09T3AZN‑G88 WXN15 and belongs to the Walter N‑Sortensystem, making it straightforward to match with compatible tool holders and indexing schemes.

Does the insert require a coating for these applications?
This insert is an uncoated carbide grade (WXN15), chosen to maintain a very sharp cutting edge and avoid coating‑related adhesion in non‑ferrous material machining.

Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen

Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.