400mm Stand For IP-Protected Platform Scales, For 400x300x130–650x500x140mm Platforms - KERN
€70.00
Product information "400mm Stand For IP-Protected Platform Scales, For 400x300x130–650x500x140mm Platforms - KERN"
Take advantage of a compact solution that raises the indicator to a practical working height and simplifies scale integration. With an approximate 400 mm elevation and a lightweight design, this stand improves readability and ergonomics for IP-protected platform scales and can be ordered or specified via Metav Werkzeuge for direct supply to the workstation.
KERN SFE-A02 stand – 400 mm elevation for IP-protected platform scales
The SFE-A02 stand provides a dedicated upright mount to raise the scale indicator for clearer viewing and safer placement in industrial environments.
- Height approx. 400 mm for elevated indicator
- Compatible with IP-protected KERN SFE platform scales
- Fits platform sizes 400×300 to 650×500 mm
- Weight approx. 0.81 kg for easy handling
Improved workflow through elevated indicator positioning
Raising the indicator delivers a measurable improvement in ergonomics and efficiency on the production floor. By placing the display at eye level, the upright mount reduces repetitive bending and enables faster reading of results, which translates into fewer handling errors and a steadier production flow. The 400 mm elevation is designed to coordinate with common bench and trolley heights, making the unit a practical addition where clear visibility of measurements is essential. The compact form supports neat cable routing and keeps the weighing station organised for regular operations.
Seamless compatibility with IP-protected platform systems
This accessory is engineered specifically for use with IP-protected platform scales from the same product family, allowing simple mechanical integration without modifying the weighing system. The mounting concept accepts platform sizes from 400×300 mm up to 650×500 mm, ensuring a secure fit for a broad range of models. The clear specification of compatibility minimises procurement uncertainty and supports quick selection for retrofit or new installations. Where scale protection and environmental sealing are required, pairing the upright mount with an IP-rated platform preserves the system’s ingress protection characteristics.
Practical handling and installation benefits for workshop use
The stand’s light overall mass of approximately 0.81 kg assists handling during setup and re‑positioning, while the compact footprint keeps the weighing area accessible. Simple attachment points reduce downtime during fitment and allow maintenance staff to carry out installation without specialised tools. For workshops aiming to centralise procurement and standardise setup, the accessory integrates with existing scale fleets to harmonise operator experience and reduce training needs. Its restrained profile also supports tidy bench layouts where space is at a premium.
Reliability and supply from a trusted precision partner
Sourcing this mount from an established supplier ensures predictable delivery and consistent quality control for industrial measurement equipment. The association with a recognised brand supports traceability across batches and simplifies parts replacement when necessary. For businesses consolidating suppliers, choosing components that align with established product families helps maintain calibration workflows and operational continuity.
Contact Metav Werkzeuge to request the KERN SFE-A02 stand with 400 mm elevation and discuss delivery options direct from our Emmerich facility.
Technical data
- SKU: SFE-A02
- GTIN: 4045761151376
- Manufacturer: KERN
- Country of origin: CN
- Commodity code: 73269098
Numbers / Core technical data
- Height: approx. 400 mm
- Weight: approx. 0.81 kg
- Platform size compatibility: 400×300×130 mm to 650×500×140 mm
Designs / Special features
- Designed for elevating the indicator/display
- Compatible with IP-protected platform scales in the SFE family
- Compact footprint for bench and trolley use
FAQ
Is the stand suitable for IP-rated platform scales?
Yes. The stand is compatible with IP-protected platform scales from the KERN SFE family and preserves the intended protection when installed as specified.
What platform sizes will fit with this stand?
The stand accepts platform sizes from 400×300×130 mm up to 650×500×140 mm, covering common small and mid-sized industrial platforms.
How heavy is the unit and how easy is it to move?
The upright mount weighs approximately 0.81 kg, which makes handling and repositioning straightforward during routine workshop adjustments.
Can the stand be used to improve operator ergonomics?
Yes. Elevating the indicator to roughly 400 mm reduces bending and improves readability, which supports faster and more reliable measurement routines.
Is the accessory suitable for retrofitting existing scales?
The design is intended for integration with KERN SFE platform scales and is suitable for retrofitting compatible models without altering the platform itself.
Metav Werkzeuge, Emmerich am Rhein, 📧 info@metav-werkzeuge.com, ☎️ +49 2822 7131930
Zubehör
Take advantage of a lightweight, workshop-ready stand that raises the weighing indicator for clearer readings and flexible installation; compatible with a wide range of KERN scale models and ready to order via Metav Werkzeuge or discussed with our consultants for application advice. KERN BFS-A07 stand — Indicator-unit stand, KERN-compatible The BFS-A07 stand is a compact mounting solution designed to raise weighing indicator units for industrial and workshop scales, making displays easier to read and integrating cleanly with existing KERN equipment. Compact stand for raising indicator units Compatible with KERN UFA, BFB, BFN and BFS Also fits KERN pallet and through-rail scales Lightweight construction approx 2.6 kg Clear readings and dependable positioning for weighing tasks The stand offers stable positioning for indicator units, which improves readability and reduces handling errors during routine weighing operations. Built as a dedicated accessory for scales, this mounting solution ensures the indicator is elevated away from the weighing platform, helping to prevent signal interference and making the display accessible from a comfortable viewing angle. The combination of a compact footprint and robust support simplifies integration into production lines and workshop benches, delivering practical benefits without complex modifications. Practical workshop integration and ergonomic benefit With a focus on convenience, the support stand reduces clutter on the work surface and provides an ergonomic viewing height for operators handling frequent weighings. The lightweight construction allows for repositioning when workflows change, while the compact design maintains a minimal footprint in tight areas. Installation is straightforward when used with the compatible KERN equipment named below, enabling quick set-up in dispatch, goods-inwards or production cells where clear indicator visibility speeds up processes and reduces downtime. Clear compatibility to match existing KERN systems The stand is intended specifically as an accessory for KERN weighing systems, offering compatibility with a range of models so that workshops can standardise on a single mounting solution. By matching the stand to compatible weighing beams, floor scales and pallet models, users gain a consistent mounting approach across different scale types. This targeted compatibility minimises uncertainty when specifying accessories and supports a streamlined workflow in industrial weighing applications. For tailored advice or order placement, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the KERN BFS-A07 stand and its suitability for specific scale setups. Technical data Article number: BFS-A07 Manufacturer: KERN SKU: BFS-A07 GTIN: 4045761111547 Weight: 2.6 kg Origin: CN Facts Weight: 2.6 kg GTIN: 4045761111547 Commodity code: 73269098 ECLASS: 21170601 Compatibility & features Accessory for scales (stands category) For raising weighing indicator / evaluator units Compatible with weighing beams KERN UFA Suitable for floor scales KERN BFB, BFN and BFS Fits pallet scales KERN UFB and UFN and through-rail scale KERN NFB FAQ What scales is this stand compatible with? The stand is compatible with a range of KERN models; compatible types include weighing beams KERN UFA, floor scales KERN BFB/BFN/BFS, pallet scales KERN UFB/UFN and through-rail scale KERN NFB, ensuring broad applicability in industrial weighing setups. Is the stand easy to move around the workshop? Yes. The KERN BFS-A07 stand has a lightweight construction of approximately 2.6 kg, allowing for straightforward repositioning when workflows or station layouts change. What is the primary purpose of the stand? The stand is designed to raise the weighing indicator unit, providing an ergonomic viewing height and reducing interference with the weighing platform for clearer, more reliable readings. Can this stand be used for multiple indicator models? The stand is provided as a universal accessory for the compatible KERN scale families listed above, making it suitable for use with a variety of indicator layouts within those model ranges. Manufacturer: KERN, Origin: CN