30 kg Platform Scale IP65 Stainless Steel Indicator, 0.01 kg Readability, Checkweighing, LCD 22 mm - KERN

Take advantage of a lightweight, workshop-ready stand that raises the weighing indicator for clearer readings and flexible installation; compatible with a wide range of KERN scale models and ready to order via Metav Werkzeuge or discussed with our consultants for application advice. KERN BFS-A07 stand — Indicator-unit stand, KERN-compatible The BFS-A07 stand is a compact mounting solution designed to raise weighing indicator units for industrial and workshop scales, making displays easier to read and integrating cleanly with existing KERN equipment. Compact stand for raising indicator units Compatible with KERN UFA, BFB, BFN and BFS Also fits KERN pallet and through-rail scales Lightweight construction approx 2.6 kg Clear readings and dependable positioning for weighing tasks The stand offers stable positioning for indicator units, which improves readability and reduces handling errors during routine weighing operations. Built as a dedicated accessory for scales, this mounting solution ensures the indicator is elevated away from the weighing platform, helping to prevent signal interference and making the display accessible from a comfortable viewing angle. The combination of a compact footprint and robust support simplifies integration into production lines and workshop benches, delivering practical benefits without complex modifications. Practical workshop integration and ergonomic benefit With a focus on convenience, the support stand reduces clutter on the work surface and provides an ergonomic viewing height for operators handling frequent weighings. The lightweight construction allows for repositioning when workflows change, while the compact design maintains a minimal footprint in tight areas. Installation is straightforward when used with the compatible KERN equipment named below, enabling quick set-up in dispatch, goods-inwards or production cells where clear indicator visibility speeds up processes and reduces downtime. Clear compatibility to match existing KERN systems The stand is intended specifically as an accessory for KERN weighing systems, offering compatibility with a range of models so that workshops can standardise on a single mounting solution. By matching the stand to compatible weighing beams, floor scales and pallet models, users gain a consistent mounting approach across different scale types. This targeted compatibility minimises uncertainty when specifying accessories and supports a streamlined workflow in industrial weighing applications. For tailored advice or order placement, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the KERN BFS-A07 stand and its suitability for specific scale setups. Technical data Article number: BFS-A07 Manufacturer: KERN SKU: BFS-A07 GTIN: 4045761111547 Weight: 2.6 kg Origin: CN Facts Weight: 2.6 kg GTIN: 4045761111547 Commodity code: 73269098 ECLASS: 21170601 Compatibility & features Accessory for scales (stands category) For raising weighing indicator / evaluator units Compatible with weighing beams KERN UFA Suitable for floor scales KERN BFB, BFN and BFS Fits pallet scales KERN UFB and UFN and through-rail scale KERN NFB FAQ What scales is this stand compatible with? The stand is compatible with a range of KERN models; compatible types include weighing beams KERN UFA, floor scales KERN BFB/BFN/BFS, pallet scales KERN UFB/UFN and through-rail scale KERN NFB, ensuring broad applicability in industrial weighing setups. Is the stand easy to move around the workshop? Yes. The KERN BFS-A07 stand has a lightweight construction of approximately 2.6 kg, allowing for straightforward repositioning when workflows or station layouts change. What is the primary purpose of the stand? The stand is designed to raise the weighing indicator unit, providing an ergonomic viewing height and reducing interference with the weighing platform for clearer, more reliable readings. Can this stand be used for multiple indicator models? The stand is provided as a universal accessory for the compatible KERN scale families listed above, making it suitable for use with a variety of indicator layouts within those model ranges. Manufacturer: KERN, Origin: CN

Take advantage of a compact, reliable stand that raises the indicator by 200 mm for improved readability and ergonomic operation; its compatibility with IP-protected KERN SFE platform scales and lightweight construction (approx. 0.59 kg) make it a practical choice for workshop integration — order the stand directly via Metav Werkzeuge or consult our specialists for application advice. Stativ SFE-A01 – Stand for KERN SFE, 200 mm height, lightweight The Stativ SFE-A01 provides a simple, robust mounting solution for KERN SFE platform weighing systems by elevating the indicator unit to enhance visibility and workflow in workshop and industrial settings. Raises display by approx 200 mm Compatible with IP-protected KERN SFE Suitable for 300×240×110–650×500×140 mm plates Lightweight at approx 0.59 kg Improved readability and operator ergonomics Elevating the indicator by 200 mm removes the need for frequent craning or repositioning of components during weighing tasks. The raised bracket offers a clear line of sight to the display, reducing handling time and the risk of reading errors; this contributes directly to productivity gains in routine checks and repetitive measurements. The compact, elevated mount is especially useful where bench space is limited, delivering a practical combination of visibility and space efficiency. Fast integration into existing KERN setups Designed specifically for use with KERN SFE platform scales, the stand accepts models with weighing-plate dimensions from 300×240×110 mm up to 650×500×140 mm, enabling straightforward retrofitting without major alterations to the workbench. The accessory supports secure mounting of the indicator to maintain stable readings during use, preserving the accuracy of the base scale. Clear compatibility and simple installation translate into less downtime and predictable workflow improvements. Workshop-proven reliability and lightweight handling With a weight of approximately 0.59 kg, the stand is easy to handle during installation and relocation while still providing stable support for the indicator unit. Manufactured for integration with IP-rated platform systems, it assists in maintaining an organised, ergonomic workstation that helps technicians focus on measurement tasks rather than equipment adjustments. For operations seeking dependable components that streamline daily procedures, this stand is a low-effort enhancement that improves usability and efficiency. For precise mounting solutions from a trusted partner, request the KERN SFE-A01 stand through Metav Werkzeuge — our consultants in Emmerich will advise on fitment and delivery to ensure a seamless upgrade to existing weighing equipment. Technical data Article number: SFE-A01 Manufacturer: KERN GTIN: 4045761144781 Origin: CN Tariff code: 73269098 eClass: 21170601 Core technical data Weight: 0.59 kg Height: approx. 200 mm Suitable plate sizes: 300×240×110 mm to 650×500×140 mm Special features Compatible with IP-protected platform scales KERN SFE Stand for elevating the indicator unit Lightweight design for simple handling FAQ Is the stand compatible with KERN SFE platform scales? The stand is compatible with IP-protected KERN SFE platform scales and is intended to elevate the indicator unit for improved visibility. What height does the stand provide? The stand provides an elevation of approximately 200 mm to raise the display into a more ergonomic viewing position. Which weighing-plate sizes are supported? Suitable for models with weighing-plate dimensions from 300×240×110 mm up to 650×500×140 mm. How heavy is the stand? The stand weighs approximately 0.59 kg, making it easy to handle during installation. Where is the stand manufactured? The product originates from China (CN) and is supplied under the KERN designation SFE-A01. Manufacturer: KERN — Origin: China — Contact: info@metav-werkzeuge.com | +49 2822 7131930