SPMG 07T308 Indexable Insert for Stahl - MetavCUT

Efficient T‑slot production through stable 80 mm cutting diameter and quick insert changes with Taegutec SPMG 07 compatibility; order directly via Metav Werkzeuge or consult our specialists for holder recommendations T-Nut Fräser TKC070TM — 80 mm diameter, 10 mm cutting height (Teknik Makina) T-Nut Fräser TKC070TM is a robust T‑slot milling cutter designed for precision slotting and T‑nut profiles in CNC machining centres 80 mm cutting diameter 10 mm cutting height 32 mm shank diameter Compatible with SPMG 07 inserts by Taegutec Faster, more predictable T‑slot machining for series production The TKC070TM cutter is engineered to shorten cycle times while maintaining consistent slot geometry. With an 80 mm diameter and 10 mm cutting height, the tool removes material efficiently and reduces the number of passes required for many T‑slot profiles. The high tooth count (10 cutting edges) spreads chip load and lowers vibration, which translates into improved surface finish and repeatability on the machine, making the cutter particularly suitable for batch production where process stability and throughput are priorities. Low tooling cost and rapid maintenance with indexable inserts This T‑slot cutter uses SPMG 07 indexable inserts, compatible with Taegutec standards, so insert replacement is fast and cost‑effective. The insert clamping is secured via an M2.5x7 Torx screw (Torx key T8), enabling quick downtime recovery and straightforward maintenance procedures. Replacing worn inserts instead of regrinding bodies keeps overall tooling investment down and preserves cutter geometry, which minimises scrap and lowers total cost per part in medium to long runs. Secure interface and workshop integration for reliable results A 32 mm shank diameter and an overall length of 120 mm provide a stiff connection to the spindle or toolholder, reducing deflection during heavy cuts. The tool’s cutting portion (shaft cutting length 45 mm; cutting shank diameter 31.5 mm) and near 1 kg mass (0.994 kg) contribute to stable rotational behaviour and predictable cutting forces. These characteristics simplify holder selection and balancing on CNC machines, enabling planned feeds and speeds that support repeatable accuracy and longer insert life. Discuss Teknik Cutting Tools' TKC070TM with Metav Werkzeuge to optimise holder selection and delivery from Emmerich for fast integration into production Technical Data Article number: TKC070TM Manufacturer: Teknik Makina Designation: T-slot cutter SKU: TKC070TM Facts Diameter: 80 mm Cutting height: 10 mm Shank diameter: 32 mm Cutting length (shaft): 45 mm Cutting shank diameter: 31.5 mm Overall length: 120 mm Number of cutting edges: 10 Weight: 0.994 kg Special features Compatible with SPMG 07 indexable inserts Insert manufacturer compatibility: Taegutec Torx screw M2.5x7 for insert clamping Torx key size: T8 Designed for T‑slot and T‑nut profile milling FAQ What insert type does the cutter require? The TKC070TM accepts SPMG 07 indexable inserts; these are used with the cutter body and are compatible with Taegutec insert geometries. How is an insert secured to the cutter? Inserts are clamped with an M2.5x7 Torx screw; a T8 Torx key is used for tightening and replacement. What are the key dimensions for machine integration? Primary dimensions include an 80 mm cutting diameter, 32 mm shank diameter and 120 mm overall length as listed for the TKC070TM. Can the cutter be balanced for high‑speed machining? The cutter’s mass (0.994 kg) and shank geometry support stable rotation; balancing should be performed according to the machine and holder specifications for high‑speed applications. Which manufacturer makes this tool and who supplies it? The tool is produced by Teknik Cutting Tools and distributed via Metav Werkzeuge under SKU TKC070TM for European supply chains Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from precise T‑slot machining with high productivity and low downtime: the cutter's 63 mm cutting diameter combined with eight cutting edges delivers efficient material removal, while the 32 mm shank ensures rigid clamping for consistent slot geometry. Order the tool directly via Metav Werkzeuge or consult the specialists for application-specific advice. T-slot cutter — 63 mm diameter, 8 cutting edges — Teknik Makina The T-slot cutter is a specialised milling tool for producing precise T-slots and T-nut grooves in milling operations, suitable for use with indexable inserts such as SPMG 07. 63 mm cutting diameter for wide T-slots Eight cutting edges for smooth material removal Accepts SPMG 07 indexable inserts 32 mm shank diameter for stable clamping Higher throughput from robust geometry and more cutting edges The tool's 63 mm cutting diameter and eight cutting edges are engineered to increase material removal rates without sacrificing finish quality. Multiple cutting edges distribute cutting forces, which reduces load peaks and supports longer tool life when combined with proper feed rates. The cutter's cutting height 10 mm provides the necessary engagement to form standard T‑nut profiles in a single pass where machine rigidity allows, cutting cycle times and simplifying process planning for production engineers and workshop managers. Insert system for quick service and predictable costs This milling head uses SPMG 07 indexable inserts and is compatible with Taegutec insert types, enabling economical replacement and rapid on‑machine changes. Inserts are secured with a M2.5x7 Torx screw, loosened and tightened with a T8 key, allowing repeatable seating and minimal downtime during insert changes. The indexable insert approach reduces tooling spend compared with solid cutters, since only the cutting segments are replaced; this supports predictable cost-per-part calculations and straightforward maintenance planning. Stable clamping and straightforward integration into production A 32 mm shank and overall length of 120 mm give the cutter the axial reach and rigidity required for many milling set‑ups while keeping overhang moderate. The tool's configuration—shaft cutting length 45 mm and cutting diameter 63 mm—is suited to milling stations that require reliable T‑slot form and repeatability. The robust design and clearly defined fixing hardware support integration into existing tool holders and milling heads, making the cutter a pragmatic choice for industrial workshops and jobbing mills seeking consistent slot geometry and process stability. For precise T‑slot production and application-specific recommendations, contact Metav Werkzeuge — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com — for technical guidance and supply from the Emmerich facility Technical data Article number: TKC068TM Manufacturer: Teknik Makina Designation: T-slot cutter Key dimensions Cutting diameter: 63 mm Number of cutting edges: 8 Overall length: 120 mm Cutting height: 10 mm Shank diameter: 32 mm Shank cutting diameter: 31.5 mm Shaft cutting length: 45 mm Weight: 0.868 kg Features and compatibility Indexable inserts: SPMG 07 Compatible insert supplier: Taegutec Torx screw: M2.5x7 Torx key size: T8 Intended use: T-slot / T-nut machining SKU: TKC068TM FAQ Which inserts fit this cutter? This cutter accepts SPMG 07 indexable inserts and is compatible with Taegutec SPMG variants for straightforward replacement. What are the cutter's diameter and number of cutting edges? The tool offers a 63 mm cutting diameter with eight cutting edges, designed to balance cutting speed and surface finish. What shank size is required for mounting? A 32 mm shank is specified for stable clamping; the cutter's dimensions support common tool holders used in production milling. How are the inserts secured and replaced? Inserts are fastened with a M2.5x7 Torx screw and require a T8 key for removal and installation, ensuring repeatable seating and quick service intervals. For which operations is this cutter intended? The cutter is intended for milling T-slots and T-nut grooves where indexable inserts are preferred for maintenance economy and high cycle throughput. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Robust machining performance combined with quick insert changes and a stable 32 mm shank ensure consistent T‑slot quality and low downtime. Order the T‑slot milling cutter TKC066TM directly via Metav Werkzeuge or ask our consultants if needed. T-slot milling cutter TKC066TM — 50 mm diameter, six cutting edges (Teknik Makina) A T-slot milling cutter engineered for precision T‑grooves in industrial milling applications, compatible with Taegutec SPMG 07 indexable inserts 50 mm cutting diameter for robust T‑slots 32 mm shank for stable clamping Six cutting edges for efficient material removal Compatible with Taegutec SPMG 07 indexable inserts Accurate T‑slot production with repeatable geometry The T‑slot milling cutter TKC066TM is configured to deliver repeatable slot dimensions thanks to a 50 mm cutting diameter combined with six cutting edges. The multi‑edge arrangement balances chip load and reduces vibration, which leads to improved surface consistency and fewer rework cycles. For production environments where repeatability matters, the cutter’s geometry supports stable finish quality without complex process adjustments. Stable clamping and reduced run‑out for better tool life A 32 mm shank paired with a 120 mm overall length provides a stiff interface between tool and spindle, lowering radial run‑out and improving tool life. The relatively modest mass (0.496 kg) contributes to reduced spindle stress during long runs. These mechanical advantages translate into fewer tool changes and a more predictable maintenance schedule, supporting higher machine uptime and better throughput. Fast insert changes and compatible tooling system Insert changes are straightforward: the cutter accepts SPMG 07 indexable inserts from Taegutec, secured with a M2.5×7 Torx screw that requires a T8 key. This common fastener format simplifies stocking of service parts and shortens changeover time, making the cutter a cost‑effective choice for batch production where quick recovery between jobs matters. Designed for productivity in workshop and production settings With an effective cutting height of 10 mm and an overall design focused on stability, the cutter is suited to repetitive T‑slot machining tasks on industrial milling centres and machining stations. The use of indexable inserts keeps per‑cutting‑edge costs low and allows optimised tool life management by rotating or replacing worn inserts rather than discarding the entire body. Practical selection and setup guidance When integrating the cutter, ensure the machine spindle and clamping system match the 32 mm shank and that sufficient torque is available for the insert screws. The cutter’s compatibility with Taegutec SPMG 07 inserts offers a clear supply path for replacements. For tailored advice on machining parameters or to confirm fitment with specific machines, Metav’s technical team can provide guidance based on production goals and material handling. Contact Metav Werkzeuge for expert advice on supply and optimal setup of the Teknik Makina TKC066TM T‑slot milling cutter — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: TKC066TM Manufacturer: Teknik Makina Name: T‑slot milling cutter Measurements & weights Diameter: 50 mm Shank diameter: 32 mm Cutting shank diameter: 31.5 mm Shaft cutting length: 45 mm Cutting height: 10 mm Number of cutting edges: 6 Overall length: 120 mm Weight: 0.496 kg Features & compatibility Compatible insert: SPMG 07 Compatible insert manufacturer: Taegutec Torx screw: M2.5×7 Torx key size: T8 Story trigger: t-nut-fraeser FAQ Which inserts fit this cutter? The TKC066TM is designed for SPMG 07 indexable inserts; Taegutec recommends these inserts for a reliable fit and repeatable cutting performance. What shank size is required for mounting? Mounting requires a 32 mm shank holder to ensure stable clamping and minimise run‑out when using the TKC066TM. How many cutting edges does the cutter have and what diameter is it? The cutter features six cutting edges and a 50 mm cutting diameter, offering balanced chip removal and good surface quality. How are the inserts secured and what tool is needed? Inserts are secured with an M2.5×7 Torx screw; a T8 key is used for fastening and insert replacement on the TKC066TM. Is the tool body replaced when inserts wear? No — worn insert edges are rotated or replaced individually, which reduces operating costs compared with solid‑tool systems. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com