T10 Torx Key, T10 Size, 0.1kg - Teknik Makina

Take advantage of the combination of M3 thread security, compact 10 mm length and precise Ø 5.6 mm seating to ensure reliable clamping for insert assemblies; order directly via Metav Werkzeuge or consult the team for specification advice. Screw for Shim (TC036TM) — M3 thread, 10 mm overall length, Teknik Makina A Screw for Shim engineered for reliable clamping of shims and small insert assemblies in compact toolholders and fixtures. Precise M3 thread for secure clamping Compact 10 mm overall length for tight fits Diameter 5.6 mm for accurate seating Compatible with T10 hex key for quick tightening Robust clamping through a precise metric thread The fastener relies on a M3 thread, a metric standard commonly used in tooling for its balance of strength and fine adjustment. This thread choice supports secure clamping and improved repeatability of seating forces in indexable insert assemblies, reducing micro‑movement during cutting operations. The metric specification simplifies component selection in mixed fleets and allows predictable torque control when using calibrated drivers. The result is a dependable connection between shim and holder that contributes to consistent machining outcomes. Space-saving form that suits compact toolholders With an overall length of 10 mm and a seating diameter of 5.6 mm, the screw is designed to fit tight envelopes without compromising clamping integrity. The short profile makes it appropriate for low‑clearance applications and specialised holders where longer fasteners would interfere with tool geometry. That compact footprint helps maintain the intended toolpath and minimises the need for design compromises when assembling small, high‑precision tooling systems. Simple installation and workshop efficiency Installation is straightforward: the connection is compatible with a T10 hex key, enabling fast assembly and repeatable torque application with commonly available hand tools. Precision machining of the component supports consistent thread engagement and long service intervals, reflecting the product's background in high-class steel machining. For procurement and routine maintenance, the compact fastener reduces inventory complexity while supporting efficient changeover procedures on the shopfloor. For specification support or to procure TekniK Cutting Tools components supplied via Metav Werkzeuge, contact our specialists in Emmerich for personalised advice and dependable dispatch from stock. Technical data Article number: TC036TM Name: Screw for Shim (Screw for U-Plate) Brand: Teknik Makina Numbers / Core technical data Diameter: 5.6 mm Thread: M3 Overall length: 10 mm Weight: 0.1 kg Special features Compatible with shims / for Shim For clamping indexable inserts Compatible with T10 hex key High-class steel machining; long service life FAQ What thread standard is used for this fastener? The fastener uses a metric M3 thread; the Screw for Shim (TC036TM) follows common metric clamping standards for small tooling components. Which driver is required to tighten the screw? A T10 hex key is specified for assembly, providing quick installation and repeatable torque application. Is this fastener suitable for securing shims in insert holders? Yes, the design is intended for use with shims and indexable insert clamping where compact, secure fastening is required. What are the key dimensions of the part? Key dimensions: diameter 5.6 mm, thread M3, overall length 10 mm, weight 0.1 kg (TC036TM). Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise metric threading and a compact head design for secure, space-saving fixings in production and maintenance environments; combine M3.5 thread reliability with Torx T10 drive efficiency for improved torque transfer and minimal cam‑out. Order the Torx screw TC069TM directly via Metav Werkzeuge or ask the consultants if needed Torx screw TC069TM – M3.5 thread, Torx T10 compatible (Teknik Makina) The Torx screw TC069TM is a compact fastener engineered for precision assemblies and workshop use, offering a robust Torx drive and a low-profile head for flush installation in tight spaces Torx drive T10 compatible M3.5 metric thread for standard fittings 4.8 mm head diameter for secure seating 8.5 mm total length for compact assemblies Consistent clamping with metric threading for industrial use The metric M3.5 thread delivers repeatable clamping performance across batch production and maintenance work, reducing variation in assembly torque and ensuring predictable joint behaviour. As a standardised specification, the M3.5 thread simplifies parts sourcing and inspection routines, supporting quality control processes and minimising downtime caused by mismatched fasteners. The design promotes reliable preload while remaining compatible with common metric toolsets used in workshops and small-scale manufacturing. Space-saving head and secure seating for flush assemblies With a 4.8 mm head diameter and a 60° head angle, the fastener provides a low-profile finish that seats cleanly into countersunk holes, producing a flush surface that prevents interference with moving parts or adjacent components. The Torx T10 interface enhances torque transfer, reducing cam‑out and allowing tighter, more consistent tightening without damage to the driver or head. This combination of compact geometry and drive reliability benefits applications where both aesthetics and mechanical clearance are important. Practical handling and workshop compatibility that speeds assembly The short 8.5 mm overall length makes the screw suitable for thin panels, instrument housings and precision fixtures where excessive thread engagement must be avoided. Compatibility with a Torx T10 driver streamlines assembly lines and on-site maintenance by using a common, high‑grip bit rather than slotted or Phillips alternatives. For procurement and inventory management, the clearly specified dimensions assist in creating unambiguous part lists and reduce the risk of assembly errors in production or repair contexts. For secure, repeatable fixings, choose the Teknik Makina Torx screw TC069TM and contact Metav Werkzeuge for ordering or technical advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: TC069TM Manufacturer: Teknik Makina Facts Weight: 0.1 kg Head diameter: 4.8 mm Thread: M3.5 Total length: 8.5 mm Head angle: 60° Special features Torx T10 drive compatibility Compact, low‑profile head for flush seating Suited to precision assemblies and workshop applications ECLASS: 21189290 FAQ What driver is required for installation? The fastener is designed for a Torx T10 driver; the Torx interface provides improved torque transfer for reliable tightening of the TC069TM screw. What are the key dimensions to check for fit? Verify the 4.8 mm head diameter, M3.5 thread and 8.5 mm overall length to ensure correct seating and thread engagement for the application. Is this screw suitable for thin sheet metal and instrument housings? Yes — the short overall length and low‑profile head make the screw appropriate for thin panels and precision housings where a flush finish is required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, industry-standard fixing solution with an M3 thread, a Ø 5.5 mm profile and a total length of 6.7 mm for dependable assembly performance; order through Metav Werkzeuge or consult the team for application advice. Screw for Shim — M3 thread, compact fixing for U-plate applications by Teknik Cutting Tools The Screw for Shim is a compact fastening component designed for secure attachment of U-plates and shims in workshop and assembly environments, offering a standard metric thread for consistent, repeatable installation. M3 thread for standard metric fittings Ø 5.5 mm compact head diameter Overall length 6.7 mm for tight assemblies Compatible with T15 hex key Precise fixing that keeps assemblies true A small, accurately produced fastening element delivers measurable benefits in repeatable assemblies. The M3 thread provides a familiar metric interface that simplifies integration into tapped holes and standard fixtures, while the Ø 5.5 mm dimension defines a compact profile suitable for constrained spaces. This results in less play at the joint and a more stable overall structure, reducing the need for rework and improving process reliability. Reduced downtime through predictable installation Consistent geometry and a short overall length make this component favourable where speed and predictability matter. The 6.7 mm total length permits secure engagement without unnecessary protrusion, helping to avoid interference with mating parts. Compatibility with a T15 hex key streamlines assembly operations, enabling rapid torquing with common workshop tools and lowering the risk of stripping during installation. Easy sourcing and simple stock management The screw is lightweight and compact, which benefits both logistics and handling in production and maintenance stock. Delivered under SKU TC062TM, this component is readily specified for mounting shims and U-plates and is suitable for standard workshop use. The combination of standard metric thread, compact dimensions and proven tooling compatibility supports efficient procurement and spare-part strategies. For robust, compact fastening choose the Teknik Cutting Tools M3 screw and contact Metav Werkzeuge in Emmerich for tailored supply and technical guidance — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: TC062TM ECLASS: 21189290 Manufacturer: Teknik Cutting Tools Facts Diameter: 5.5 mm Thread: M3 Overall length: 6.7 mm Weight: 0.1 kg Special features Compatible with T15 hex key For Shim / for U-plate Compact profile for tight assemblies FAQ What size and thread does this fixing use? The Screw for Shim is specified with an M3 thread and a diameter of 5.5 mm, listed under SKU TC062TM. Is a special tool required for installation? Installation is carried out with a T15 hex key, making the component compatible with common workshop tooling. What applications suit this fastener? The component is intended for securing shims and U-plates where a compact, metric-threaded fastening is needed; it is suitable for general assembly and workshop use. Which company produces this part? This fastening component is manufactured by Teknik Cutting Tools and distributed under SKU TC062TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com