50mm Face Milling Head for SNEU 1206 Indexable Inserts With Internal Coolant, 45° Cutting Angle - Teknik Makina

Benefit from precise, compact face milling with internal coolant and compatibility with SNEU 1206 indexable inserts; order directly via Metav Werkzeuge or consult our specialists for application-specific advice.

Face milling head – 50 mm, internal coolant (Teknik Makina)

Face milling head for efficient face milling operations with SNEU 1206 indexable inserts, designed for compact setups and robust chip control.

• 50 mm diameter for compact face milling head
• Internal coolant for improved chip evacuation
• Compatible with SNEU 1206 indexable inserts
• Torx T20 screws (M5x12) for secure fixing

Compact design for stable, accurate face milling

The compact 50 mm diameter and 40 mm overall length create a low-profile toolholder that reduces overhang and enhances rigidity. With a maximum cutting diameter of 63 mm and a 45° cutting angle, this tool produces clean face finishes while maintaining process stability. The light weight of 0.447 kg minimises spindle load for faster acceleration and deceleration, which is particularly beneficial in small to medium-sized machining centres. These dimensional and geometric specifications translate directly into improved surface quality and repeatable machining cycles.

Internal coolant and secure clamping for longer tool life

Equipped with internal coolant, this head directs cutting fluid precisely to the cutting edges, improving lubrication and chip evacuation. That targeted cooling reduces thermal stress on the inserts, extending cutting life and maintaining cutting edge geometry. Fixing is achieved with Torx T20 screws (M5x12), offering a robust and repeatable clamping method that simplifies insert changes while ensuring safe seating under intermittent loads. Compatibility with Walter-type inserts (SNEU 1206) means replacement parts are widely available, supporting continuous production with minimal downtime.

Workshop-friendly maintenance and straightforward integration

Maintenance is straightforward thanks to standardised fastenings and a common insert format; insert changes and re-torquing require only a Torx T20 key. The head supports five cutting positions to balance material removal rates and tool life, making it suitable for both roughing and semi-finishing passes. Its compact form factor and standard interface make it a flexible choice for a wide range of industrial and trade workshop applications where space, reliability and consistent results are priorities.

Choose the Teknik Makina face milling head for reliable, coolant-enhanced face milling—contact Metav Werkzeuge by email at info@metav-werkzeuge.com or call +49 2822 7131930 for ordering and technical advice

Technical data

• SKU: T164-1TM
• Product type: Face milling head
• Brand: Teknik Makina
• Label: 50 mm face milling head SNEU 1206 L40 mm with internal coolant
• ECLASS: 21181015

Key measurements

• Diameter: 50 mm
• Overall length: 40 mm
• Max. cutting diameter: 63 mm
• Cutting angle: 45°
• Weight: 0.447 kg
• Number of cutting edges: 5

Features & compatibility

• Internal coolant
• Compatible with SNEU 1206 indexable inserts
• Suitable for inserts by Walter
• Torx screw: M5x12
• Torx key: T20

FAQ

What insert type does this face milling head accept? The face milling head accepts SNEU 1206 indexable inserts; it is designed for that insert geometry and seat.

Is the tool suitable for installations with internal coolant requirements? Yes, the head features internal coolant, delivering coolant directly to the cutting zone to improve chip evacuation and tool life.

Which fastening hardware is used for the inserts? Inserts are secured with M5x12 Torx screws tightened with a T20 Torx key for secure and repeatable clamping.

What is the maximum cutting diameter achievable with this head? The maximum cutting diameter specified is 63 mm, allowing for effective face milling across a range of component sizes.

Can this head be used with Walter inserts? The head is listed as compatible with inserts from Walter, supporting common workshop inventories for rapid replacement.

How does the compact size benefit workshop operations? A compact diameter and short overhang reduce spindle load and increase rigidity, resulting in improved surface finish and more consistent machining cycles.

Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com