T20 Torx Key, Stainless Steel Finish - Teknik Makina

Secure, precise fastening for end mill tooling is achieved with the combination of an M5 thread and a compact 10 mm overall length, delivering dependable clamping and reduced tool movement during milling operations. Order the component directly via Metav Werkzeuge or consult our specialists for matching to specific tool holders. Screw for End Mill TC174TM — M5 thread, 10 mm overall length (Teknik Makina) The Screw for End Mill TC174TM is a compact fastening component designed to secure end mill cutters in standard tool holders for stable machining in workshop and production environments. M5 thread for standard tool holders 10 mm overall length for compact clamping 7 mm diameter for precise seating Hex key T20 drive for secure tightening Secure clamping for reliable machining This fastening component uses an M5 thread and a 10 mm overall length to provide a tight connection between cutter and holder, improving stability during milling. The hex key T20 drive ensures reproducible tightening, which helps to minimise axial play and vibration. In a cutting-tool context, consistent clamping directly supports better surface finish and longer tool life; the component is therefore a simple, effective measure to increase process reliability. The product is manufactured by Teknik Makina and designed for integration with common end mill holders. Seamless integration into cutting tool workflows Compatibility with standard holders is indicated by the M5 specification and the 7 mm seating diameter, allowing the part to work with a wide range of end mill assemblies. The compact form factor reduces interference in tight setups and facilitates rapid replacement during tool changes. Routine maintenance is straightforward: removal and reinstallation with a hex key T20 avoids specialised equipment. If confirmation of fit is required, Metav Werkzeuge can assist with technical matching to existing holders and clamping systems for a seamless workshop workflow. Practical handling and workshop guidance Weighing 0.1 kg, the component is compact and easy to handle while still offering robust mechanical engagement for small to medium-sized milling operations. Installation requires a hex key T20 and controlled tightening to avoid overloading the thread; correct tightening improves concentricity and helps to limit runout in the tool assembly. For workshops seeking dependable, repeatable clamping solutions, this screw provides a low-complexity option that supports uptime and consistent machining results. For technical matching and secure supply of Teknik Cutting Tools fastening components, contact Metav Werkzeuge in Emmerich — phone +49 2822 7131930 or email info@metav-werkzeuge.com — our consultants will advise on compatibility and delivery. Technical Data Article number: TC174TM Designation: Screw for End Mill ECLASS: 21189290 Manufacturer: Teknik Makina Facts Thread: M5 Diameter: 7 mm Overall length: 10 mm Weight: 0.1 kg Special features Drive: Hex key T20 Suitable for end mill holders SKU: TC174TM FAQ Will this screw fit standard end mill holders? The screw TC174TM is specified with an M5 thread and a 7 mm seating diameter, which fits many standard end mill holders; verification against the holder thread and seating dimensions is recommended. What tool is required to install the screw? A hex key T20 is required to tighten the Screw TC174TM; the hexagonal recess provides reproducible torque application for secure clamping. What are the key dimensions of the component? Key dimensions: M5 thread, 7 mm diameter, 10 mm overall length, weight 0.1 kg; the SKU is TC174TM for ordering and reference. Is the material of the screw specified? Material is not specified in the available product data for the Screw TC174TM; material information should be confirmed with Metav Werkzeuge if required for specific applications. How does this screw affect machining quality? By providing a secure, correctly seated connection in the tool holder, the Screw TC174TM helps to reduce axial play and vibration, supporting improved surface finish and repeatability in milling operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise M5 threading and a compact 12 mm length for secure, space-saving fastening; the Torx drive reduces cam‑out and speeds assembly. Order directly via Metav Werkzeuge or consult our product specialists for application advice. Torx screw TC083TM — M5 x 12 mm, Torx drive (Teknik Makina) Torx screw TC083TM for mechanical assemblies where compact form and reliable torque transfer are required M5 thread for standard metric assemblies Head diameter 7 mm for defined seatings Compact 12 mm overall length for confined spaces Torx drive compatible with T20 bits Consistent M5 thread for secure connections The fastener is engineered with a defined M5 thread that provides consistent engagement and predictable clamping behaviour. Where repeatability matters, the metric thread profile reduces the risk of loosening under light vibration and simplifies torque setting during assembly. The specification supports common production and maintenance environments, enabling standardised tooling and fewer inventory variants. Space-saving dimensions that simplify assembly With an overall length of 12 mm and a head diameter of 7 mm, this component is designed for installations where clearance is limited. The compact geometry allows secure fastening without protruding components, which benefits stacked or nested assemblies. Small form factor screws like this shorten installation time in cluttered assemblies and often remove the need for additional countermeasures such as washers or spacers. Torx drive for efficient torque transfer and less wear A Torx drive provides improved engagement between tool and fastener, allowing higher torque transmission with reduced cam‑out compared with slotted or Phillips drives. The drive compatibility with T20 bits enables rapid screwdriving with cordless or pneumatic drivers while protecting both the bit and the screw head from premature damage. The result is faster cycle times and lower tool‑replacement costs in production and workshop settings. Designed for straightforward procurement and workshop use Supplied under the Teknik Makina designation, the TC083TM is a practical choice for procurement managers seeking an economical, repeatable fastening solution. The concise specification and common drive type simplify stockkeeping and tool selection. For workshops, the screw’s straightforward geometry and compatibility with standard Torx tooling support quick decisions on repair and retrofit operations. For reliable fastening from Teknik Makina, contact Metav Werkzeuge to discuss compatibility, availability or to place an order for the TC083TM fastener — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: TC083TM EClass: 21189290 Manufacturer: Teknik Makina Key measurements Diameter: 7 mm Thread: M5 Overall length: 12 mm Angle: 60° Weight: 0.1 kg Features and compatibility Drive type: Torx Compatible driver: T20 Torx key Fastener type: screw FAQ What driver is required for this screw? The screw is designed for a Torx drive and is compatible with a T20 Torx key or bit; this ensures efficient torque transfer for the TC083TM. Is the TC083TM suitable for tight assemblies? Yes, the overall length of 12 mm and a head diameter of 7 mm make the TC083TM appropriate for compact or recessed fastening applications. Which thread does this fastener use? The fastener uses a metric M5 thread, suitable for common metric assemblies and compatible with standard M5 threaded holes and inserts. Can this screw be used with power drivers? The Torx drive and T20 compatibility allow use with cordless and pneumatic drivers; correct torque settings should be observed to avoid over‑tightening. Who manufactures this screw? The screw is supplied under Teknik Makina and listed with article number TC083TM for procurement and stock purposes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of standardised metric specification, compact dimensions and straightforward drive compatibility for efficient assembly and tidy stock management; order via Metav Werkzeuge or consult the team for specification advice. Torx screw TC085TM — M5 thread, 12 mm length, Teknik Makina A Torx screw TC085TM designed for secure metric assemblies where a compact length and a Torx drive ensure repeatable fastening in workshop and industrial environments M5 metric thread 6.6 mm head diameter 12 mm overall length Compatible with T20 Torx key Reliable fastening for routine assembly work The compact fastener offers a M5 thread combined with an overall length of 12 mm, delivering a standardised connection suitable for a wide range of metric assemblies. The measured 6.6 mm head diameter provides a clear reference for clearance and countersink planning, while the listed 75° head angle clarifies seating geometry for through‑holes or tapered seats. As a standard Torx fastener, the component supports consistent torque transfer and reduced cam‑out compared with slotted or Phillips drives, which helps maintain assembly quality and reduces rework in serial production. Practical compatibility and workshop use Specified for use with a T20 Torx key, the part fits common workshop tool sets and maintenance kits, enabling quick interventions without special tooling. The screw’s classification under the provided eClass identifier supports procurement and inventory systems that rely on standard taxonomy for ordering and SKU management. The compact mass of 0.1 kg per listed unit makes it easy to calculate shipping and storage requirements for small batches, and the metric thread ensures interchangeability with typical M5 threaded components used in fixtures, panels and light mechanical assemblies. Procurement advantages and inventory simplification Selecting metric fasteners with clear dimensional data reduces ordering errors and simplifies stockkeeping; the standard M5 specification and Torx drive reduce the number of different items required. For purchasing departments and maintenance planners, the combination of a defined head diameter, length and drive type supports accurate BOM entries and faster supply‑chain turnaround. The product’s SKU (TC085TM) and manufacturer details are provided for traceability and to support quality assurance processes within production and service environments. For reliable supply of Teknik Makina fasteners such as the Torx screw TC085TM, contact Metav Werkzeuge in Emmerich for product availability and procurement support — eMail: info@metav-werkzeuge.com • Phone: +49 2822 7131930 Technical data Article number: TC085TM Manufacturer: Teknik Makina ECLASS: 21189290 Facts Thread: M5 Diameter: 6.6 mm Overall length: 12 mm Angle: 75° Weight: 0.1 kg Special features Drive type: Torx Suitable for key: T20 Fastener type: Screw FAQ What are the main dimensions of this fastener? The Torx screw TC085TM has an M5 thread, a head diameter of 6.6 mm and an overall length of 12 mm as specified by the manufacturer Teknik Makina. Which tool is required for installation? Installation uses a T20 Torx key; the Torx drive on the TC085TM ensures secure torque transmission during assembly. Is this screw suitable for general workshop assemblies? Yes, the metric M5 thread and compact 12 mm length make this fastener suitable for standard workshop and maintenance applications where a Torx drive is preferred. How is the product identified for ordering and stock control? Order and inventory references use the SKU TC085TM and the eClass code 21189290 to ensure correct procurement and traceability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a secure M5 thread, compact 12 mm overall length and a hex key T20 drive for reliable end‑mill clamping; order the part directly via Metav Werkzeuge or contact our consultants for application advice. Screw TC176TM – Screw for End Mill with M5 thread and T20 drive (Teknik Makina) The Screw TC176TM is a precision clamping screw for end‑mill holders, designed for reliable fixation in compact tool assemblies and suited to workshop and light industrial applications. M5 thread for secure clamping 7.3 mm core diameter for stability 12 mm overall length for compact setups Hex key T20 drive for standard toolholders Consistent clamping from accurate thread geometry The compact clamping element delivers dependable axial force through a precisely cut M5 thread, ensuring stable retention in end‑mill assemblies. The thread form has been selected for repeatable torque transmission, reducing the risk of loosening under lateral loads. Thanks to the 7.3 mm core diameter, the component balances shear strength with minimal bulk, making it suitable for confined toolholder spaces where maintaining rigidity without excess mass matters. This technical specification supports uninterrupted machining cycles and predictable tool life. Fits tight toolholder layouts without compromise With an overall length of 12 mm, this fastening solution is engineered for constrained applications where every millimetre of length counts. The low profile reduces interference with adjacent tooling and simplifies retrofit into existing holders. The hex key T20 drive provides a conventional interface for workshop torque tools and enables controlled tightening with standard torque wrenches or drivers. For operators working across varied fixtures, the combination of compact size and a standard drive type supports fast, repeatable assembly and efficient changeover. Simple integration and inspection for safe operation Assembly and inspection are straightforward: the clamping screw accepts a standard hex key and requires no special tooling, making routine checks part of normal maintenance rounds. Because the geometry is conventional and documented, torque recommendations can be applied consistently across toolrooms, supporting quality assurance protocols. The modest weight (0.10 kg) and uncomplicated design minimise handling time while helping to maintain inventory parity across similar fastenings in the workshop. For secure end‑mill clamping choose the Teknik Makina TC176TM screw and order via Metav Werkzeuge — contact Metav Werkzeuge in Emmerich for product guidance at +49 2822 7131930 or info@metav-werkzeuge.com Technical Data Article number: TC176TM Manufacturer: Teknik Makina ECLASS: 21189290 Facts Diameter: 7.3 mm Thread: M5 Overall length: 12 mm Weight: 0.10 kg Special features For end mill clamping Hex key T20 fitting FAQ What is the thread size of the screw? The thread is M5, specified for the TC176TM screw from Teknik Makina to provide reliable clamping force. Which drive tool is required for installation? Installation requires a hex key T20, matching the drive recess on the Teknik Makina TC176TM clamping screw. Is the component suitable for compact toolholders? Yes, the 12 mm overall length and 7.3 mm core diameter make the TC176TM suitable for compact end‑mill holders where space is limited. How much does the screw weigh? The screw has a listed weight of 0.10 kg, which supports easy handling and stock management. Can the screw be used across different end‑mill brands? The screw is intended for standard end‑mill clamping arrangements and, provided the toolholder accepts an M5‑threaded clamping element with a T20 drive, the Teknik Makina TC176TM is compatible Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com