63mm Face Mill for RDMT 12T3 Indexable Inserts L40mm With Internal Coolant - Teknik Makina

Compact 63 mm diameter, internal coolant and five cutting edges combine to deliver stable, high-feed face milling in confined setups; the short 40 mm overall length increases rigidity while the lightweight construction reduces spindle load. Order the face mill directly via Metav Werkzeuge or ask our consultants if needed.

Face mill head for RDMT 12T3 — 63 mm, internal coolant (Teknik Makina)

The face mill head is designed for compact face milling with RDMT 12T3 indexable inserts, offering a rigid 40 mm overall length and internal coolant for consistent surface quality.

• 63 mm diameter for compact milling
• Internal coolant for longer insert life
• Compatible with RDMT 12T3 indexable inserts
• Five cutting edges for smooth material removal

Greater rigidity and reliable chip control for compact setups

The compact 63 mm diameter together with a 40 mm overall length provides an inherently rigid machining solution where space and stability are decisive. This configuration reduces overhang and vibration, which improves repeatability and contributes to a consistent surface finish in short-reach face milling operations. The head is compatible with RDMT 12T3 round indexable inserts, a common standard that allows rapid reconditioning of the cutting edge without full-tool replacement. The relatively low mass (0.468 kg) reduces spindle stress during rapid traverses and permits agile tool changes on busy shop floors. For process planning, the combination of reduced runout potential and standardized insert geometry supports predictable cycle times and easier inventory control.

Internal coolant and multi-insert layout increase productivity

An integrated internal coolant channel directs cutting fluid close to the contact zone, which lowers cutting temperatures and assists in efficient chip evacuation. This feature extends insert life and helps maintain a stable cutting edge, particularly useful during higher cutting speeds or when machining abrasive or heat-sensitive workpieces. The head accommodates five cutting edges, distributing load and enabling smooth material removal with improved surface integrity. Together, the coolant feed and the multi-insert layout allow for higher feed rates while keeping thermal deformation and built-up edge to a minimum, translating into better dimensional stability over longer production runs.

Practical handling, easy insert changes and shop-floor compatibility

Maintenance and assembly have been simplified with standard fastenings: the inserts are secured with M3.5 x 8.5 Torx screws (Torx key T15 supplied separately), enabling rapid insert changes and minimal downtime. The design supports straightforward seating of RDMT 12T3 inserts and is well suited to routine tool-change procedures in industrial workshops. Supplied by Teknik Makina (SKU T284-1TM), the head is intended for customers seeking a compact, serviceable solution that keeps tooling inventories lean while preserving process stability. Documentation and clearly marked dimensions facilitate integration into existing tool lists and CAM setups.

Contact Metav Werkzeuge today for tailored advice and to secure this Teknik Makina face mill head for precise, compact milling operations; Metav Werkzeuge can advise on compatibility and delivery from their Emmerich stock.

Technical Data

• SKU: T284-1TM
• Label: 63mm face mill head RDMT 12T3 L40mm with internal coolant
• ECLASS: 21180902
• Manufacturer: Teknik Makina

Facts

• Diameter: 63 mm
• Overall length: 40 mm
• Weight: 0.468 kg
• Number of cutting edges: 5

Special features

• Internal coolant: yes
• Compatible inserts: RDMT 12T3
• Torx key: T15
• Torx screw: M3.5 x 8.5
• Product type: face mill head
• UID: T284-1TM

FAQ

What insert type does this head accept?
The face mill head accepts RDMT 12T3 indexable inserts; this standard insert family is fitted in the head supplied by Teknik Makina (SKU T284-1TM).

Does the tool provide coolant to the cutting edge?
Yes, the head features internal coolant, which delivers fluid to the cutting zone for improved cooling and chip control.

How many inserts are fitted and what is the advantage?
The head uses five cutting edges, distributing cutting forces for smoother material removal and allowing higher feed rates with stable surface finish.

Which fastening and key are required for insert changes?
Inserts are secured with M3.5 x 8.5 Torx screws, tightened with a T15 Torx key; this enables fast and repeatable insert replacement.

Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com