50mm Face Milling Head for SDMT 1204 Indexable Inserts L40mm Internal Coolant, 45° Cutting Angle - Teknik Makina

Compact 50 mm face milling head with internal coolant and four cutting edges provides reliable finishing with simple insert changes; order the face mill directly via Metav Werkzeuge or contact our consultants for application advice.

Face milling head T358-1TM — 50 mm diameter, internal coolant (Teknik Makina)

Face milling head T358-1TM is a compact tool for efficient finishing with SDMT 1204 indexable inserts, designed for space‑constrained setups and frequent insert changes

Face milling head for SDMT 1204 inserts
50 mm diameter for compact setups
Internal coolant for improved chip evacuation
Four cutting edges, Torx T15 screws

Accurate finishing in tight spaces for consistent results

The compact design with a 50 mm diameter ensures stable engagement and predictable cutting forces when working on small‑scale faces. Built for use with SDMT 1204 indexable inserts, this head delivers a balance between accessibility and rigidity that supports uniform surface quality. The lightweight construction (approx. 0.312 kg) reduces spindle load in sensitive setups while the short 40 mm overall length helps to keep overhang minimal, which in turn lowers the risk of chatter and dimensional deviation. Engineers benefit from straightforward integration into existing toolholders and predictable process behaviour that supports repeatable batch production.

Cooler cuts and longer insert life through directed coolant

Internal coolant channels feed cutting zones directly, improving lubrication and chip evacuation during interrupted or continuous milling. The internal coolant reduces thermal peaks at the cutting edge, which slows wear and helps maintain tool geometry for longer intervals between indexings. Combined with secure fastenings — Torx T15 drive and M4x10 screws — the system provides stable clamp force that minimises micro‑movement under load. The practical result is enhanced productivity and fewer unscheduled stops, making the head an effective choice when stability and uptime are priorities in series manufacturing.

Fast servicing and reliable clamp for smooth shopfloor routines

The use of SDMT‑type indexable inserts means insert replacement is quick and does not require regrinding, so maintenance routines are compact and predictable. The head is fitted with four cutting edges, supporting uninterrupted rotation and even wear distribution across inserts; this reduces total tooling costs per component when set into an optimised tool cycle. Assembly and disassembly are handled with a common Torx T15 key, streamlining maintenance procedures and allowing trained staff to perform swaps rapidly. For workshops seeking a dependable, low‑complexity milling head, the combination of compact geometry and direct coolant creates measurable time savings on recurring tasks.

Contact Metav Werkzeuge today to discuss how the Teknik Makina face milling head T358-1TM can be integrated into existing processes — technical advice and ordering information available via info@metav-werkzeuge.com or by phone on +49 2822 7131930

Technical Data

• SKU: T358-1TM
• Product type: Face milling head
• Brand: Teknik Makina
• Description: for SDMT 1204 indexable inserts
• Label: 50mm Planmesserkopf SDMT 1204 L40mm mit Innenkühlung

Core specifications

• Diameter: 50 mm
• Shank diameter: 22 mm
• Overall length: 40 mm
• Weight: 0.312 kg
• Cutting edges: 4
• Cutting angle: 45°
• Drive: Torx T15
• Fastening screws: M4x10
• ECLASS: 21181015

Features / Compatibility

• Internal coolant
• Compatible with SDMT 1204 indexable inserts
• Suitable for ZCC insert manufacturer
• Compact design for reduced overhang
• Quick insert change via Torx fastening

FAQ

What inserts fit this face milling head?
The face milling head accepts SDMT 1204 indexable inserts; it is also specified as compatible with inserts from ZCC.

Does the tool provide coolant to the cutting edge?
Yes, the head features internal coolant channels that deliver fluid directly to the cutting zone to aid chip evacuation and reduce thermal wear.

Which fastening hardware is used for the inserts?
Inserts are secured with Torx T15 drive screws; the specified screw size is M4x10 for reliable clamping.

Is the head suitable for compact or heavy setups?
The compact 50 mm diameter and 40 mm length make the head especially suitable for space‑limited or light to medium‑duty milling operations where reduced overhang is an advantage.

Manufacturer/Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com