63mm Face Milling Head for HNGX 0906 Indexable Inserts with Internal Coolant, 45° Cutting Angle - Teknik Makina

Benefit from robust chip control thanks to internal coolant and increased productivity from six cutting edges; the 63 mm diameter and 45° cutting angle deliver efficient, high-quality facing. Order the face milling solution directly via Metav Werkzeuge or consult their specialists for application advice.

Face milling head for HNGX 0906 Indexable Inserts — 63 mm, internal coolant

Face milling head for HNGX 0906 indexable inserts, designed for precision facing and efficient chip evacuation in production and job-shop environments.

• 63 mm diameter for wide material engagement
• Internal coolant for improved chip evacuation
• Six cutting edges for efficient material removal
• Compatible with HNGX 0906 inserts by Pramet

Boost throughput with optimised cutting geometry and coolant

The machining head combines a compact form with performance-focused features to raise cycle efficiency. Equipped with internal coolant, the tool directs cutting fluid precisely to the cutting zone, promoting superior chip control and thermal stability. The 63 mm diameter offers a broad engagement area, while the six cutting edges reduce index changes per component processed, resulting in fewer stoppages and higher net output. This configuration is especially suitable for repetitive facing operations where consistent removal rates and predictable wear behaviour are required.

Improved surface quality and reduced cutting forces

A 45° cutting angle reduces axial load and smooths the cutting action, which helps to produce a finer surface finish and lowers vibration risk during finishing passes. The head accepts HNGX 0906 style indexable inserts, enabling the use of well-known grades and geometries for varied materials. Selecting an appropriate insert grade balances tool life against surface requirements; using tougher grades extends life under heavier cuts, while fine-grain grades favour superior finishes. The result is a measurable improvement in part quality with predictable tool-change intervals.

Maintenance-friendly design for reliable workshop use

Maintenance and insert changes are straightforward thanks to the familiar fastenings and service items. The cutter is secured with M4.5x11 Torx screws and adjusted using a Torx T15 key for quick, repeatable clamping. Compatibility with inserts from established suppliers such as Pramet ensures easy sourcing and interchangeability. The head’s compact overall length of 40 mm and moderate mass support safe handling and fast set-up on modular arbors. Documentation of fastening torques and a simple replacement routine are recommended to preserve repeatability and to keep down-time to a minimum.

Choose the Teknik Makina face milling head for internal-coolant facing operations and contact Metav Werkzeuge for tailored application advice or ordering assistance — Metav Werkzeuge’s specialists are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930

Technical data

• SKU: T418-1TM
• Label: 63 mm face milling head HNGX 0906 L40 mm with internal coolant
• Manufacturer: Teknik Makina

Facts

• Diameter: 63 mm
• Overall length: 40 mm
• Weight: 0.518 kg
• Cutting edges: 6
• Cutting angle: 45°
• Torx key: T15
• Torx screw: M4.5x11

Special features

• Internal coolant
• For HNGX 0906 indexable inserts
• Compatible with Pramet inserts
• Product type: Face milling head
• SKU/ID: T418-1TM

FAQ

Is this head compatible with Pramet inserts?
The face milling head accepts HNGX 0906 indexable inserts and is listed as compatible with Pramet insert grades and geometries.

How does the internal coolant improve machining?
Internal coolant in this milling head directs fluid to the cutting edge, improving chip evacuation and thermal control for more consistent tool life and surface finish.

What fasteners are used and which key is required?
Clamping is achieved with M4.5x11 Torx screws; a Torx T15 key is used for insert changes and maintenance.

Can this head be used for finishing and roughing?
The tool’s 45° cutting angle and multiple cutting edges make it suitable for both finishing passes and higher-feed facing, depending on insert grade and cutting parameters.

What is the product identifier for ordering?
Order using SKU T418-1TM for the 63 mm face milling head with internal coolant.

Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com