80mm Face Milling Cutter For HNGX 0906 Indexable Inserts 55° Cutting Angle, M4.5x11 Torx - Teknik Makina

Benefit from the combination of an 80 mm diameter cutting face, six cutting edges and a secure 27 mm shank for steady, repeatable face milling. Order the face milling head directly via Metav Werkzeuge or ask our consultants if needed.

Face milling head T419TM – 80 mm diameter, for HNGX 0906 indexable inserts (Teknik Makina)

A face milling head engineered for efficient face milling and finishing operations using HNGX 0906 indexable inserts.

*80 mm diameter for broad contact area
*Six cutting edges for smooth surface finish
*Compatible with HNGX 0906 indexable inserts
*27 mm shank diameter for secure mounting

Greater contact area for consistent surface quality

With an 80 mm cutting face and six cutting edges, this cutter head increases the engagement area per pass, which helps to produce a more uniform finish on the workpiece. The larger contact diameter reduces the need for multiple overlapping passes, improving throughput while maintaining surface integrity. The design suits medium‑duty face milling applications where surface consistency and operational steadiness influence the overall production quality.

Fast, dependable insert changes and secure clamping

The milling head accepts HNGX 0906 indexable inserts and is compatible with Pramet insert geometries, which simplifies logistics when standardising tooling across machines. Insert retention uses M4.5x11 Torx screws; a T15 key is required for tightening. This fastening approach delivers reliable clamping force with predictable torque behaviour, so changeovers are quick and repeatable and tool runout is minimised — essential when repeat accuracy matters on batch production.

Cutting geometry that lowers forces and improves finish

The cutter’s 55° cutting angle is chosen to balance cutting force and chip formation. A steeper approach angle disperses load across multiple inserts, reducing vibration and allowing each edge to deliver a cleaner cut. For users unfamiliar with cutter geometry: this means lower stress on the holder and toolbody, improved tool life for the inserts and a better first‑pass surface — particularly useful when finishing cast or machined faces where appearance and dimensional control are needed.

Robust mounting and workshop compatibility

Engineered with a 27 mm shank diameter and an overall length of 50 mm, the tool body offers secure mounting in standard toolholders while keeping the setup compact. The unit weight of 1.067 kg contributes to a stable rotary mass that resists chatter during interrupted cuts. Supplied compatibility with widely used insert formats and established fasteners ensures the head integrates easily into existing tooling systems and maintenance routines, supporting predictable production uptime.

For availability, tooling advice or to arrange a volume supply, contact Metav Werkzeuge in Emmerich — our specialists will advise on setup and compatibility for your application

Technical data

• Article number: T419TM
• Manufacturer: Teknik Makina
• Product: Face milling head (Planmesserkopf)
• For indexable inserts: HNGX 0906

Facts

• Diameter: 80 mm
• Overall length: 50 mm
• Shank diameter (mount): 27 mm
• Weight: 1.067 kg
• Cutting angle: 55°
• Number of cutting edges: 6

Special features

• Compatible with Pramet inserts
• Torx screw M4.5x11 for insert clamping
• Torx key size T15 required
• Designed for HNGX 0906 indexable inserts
• Brand association: Teknik Cutting Tools

FAQ

What insert type does this cutter head accept?
The cutter head accepts HNGX 0906 indexable inserts; it is specified for that insert format and aligns with Pramet geometries.

Which screw and key are needed for clamping the inserts?
Insert clamping uses M4.5x11 Torx screws and requires a T15 Torx key for correct tightening.

What benefits does the 55° cutting angle provide?
A 55° cutting angle reduces peak cutting forces and improves chip flow, helping to achieve a smoother finish and longer insert life in typical face milling operations.

Is the shank size suitable for standard holders?
The tool uses a 27 mm shank diameter, which is compatible with standard toolholders designed for that dimension and offers stable mounting for moderate cutting loads.

What is the SKU and who manufactures the tool?
The SKU is T419TM and the item is supplied by Teknik Makina (Teknik Cutting Tools) as specified in the product data.

Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com