50mm Corner Tool Holder 90° For WNMU 0806 Indexable Inserts, M5x12 Torx Screw T20 - Teknik Makina

Take advantage of the combination of a compact 90° cutting angle, secure Torx clamping and precise fitment for WNMU 0806 indexable inserts to streamline turning operations; order genuine components via Metav Werkzeuge or consult our experts for seamless integration and supply.

Corner Tool Head T543TM — 90° Turning Head for WNMU 0806 Indexable Inserts (Teknik Makina)

The Corner Tool Head T543TM is a 90° turning head designed for turning and facing applications that accept WNMU 0806 indexable inserts, offering a compact interface for toolholders with a 22 mm shank.

• 90° cutting angle for compact set-ups
• Compatible with Kyocera WNMU 0806 inserts
• 22 mm shank diameter for standard holders
• Secured by M5x12 Torx screw with T20 key

Accurate right‑angle cutting that keeps setups compact and predictable

The 90° geometry of this turning head delivers a dependable orientation for corner and face turning tasks. By using a dedicated interface for WNMU 0806 inserts, the head ensures repeatable seating and chip control appropriate to the insert geometry; this reduces trial adjustments during tool changes and supports a consistent machining routine. The compatibility with Kyocera insert standards simplifies procurement and reduces the need for adapters, which in turn shortens machine downtime between jobs.

Secure clamping and straightforward insert replacement for efficient workshops

Clamping is achieved via an M5x12 Torx screw tightened with a T20 key, providing a robust connection between insert and head. The clear mechanical fastening means indexable inserts can be replaced rapidly while maintaining axial and radial positional stability. The head’s 22 mm mounting diameter is compatible with common toolholder systems, enabling fast tool swaps and predictable engagement with existing turning fixtures.

Designed to cut changeover time and protect production throughput

With three cutting edges and a dedicated insert pocket, the tool head supports quick rotation or replacement of the insert to present a fresh cutting edge without replacing the entire tool assembly. This feature contributes to lower per‑piece tooling costs and fewer interruptions on the shop floor. The standardised interface reduces setup variability, so cycle times remain stable across repeat batches and shift changes.

Built to withstand workshop handling while keeping mass low

A compact form with a 50 mm head diameter and an overall length of 46 mm balances stiffness with accessibility in confined toolstations. At 0.36 kg, the component is light enough to be handled easily during tool changes yet substantial enough to contribute to cutting stability in routine turning tasks. The robust metalwork and precise machining of locating surfaces preserve repeatability even after multiple insert changes.

Clear fitment and application guidance for procurement and planning

This turning head is intended for operations specifying WNMU 0806 indexable inserts from Kyocera or equivalent plate designs. It is suitable for general turning and facing where the insert geometry and toolholder compatibility match; specific material suitability depends on the selected insert grade and machining parameters. The standardised shank diameter simplifies inventory planning for workshops using modular tool systems.

Simple maintenance and practical handling recommendations

Routine maintenance is limited to cleaning seating surfaces and checking the M5x12 Torx screw for correct clamping after initial run‑in. Use the specified T20 key for consistent torque application and inspect the insert pocket for chips or damage before fitting a fresh cutting plate. Correct handling and timely replacement of worn inserts maintain cutting performance and extend the service life of the tool head.

For technical advice, genuine Teknik Cutting Tools components or supply of the Corner Tool Head T543TM, contact Metav Werkzeuge GmbH — info@metav-werkzeuge.com or +49 2822 7131930; our specialists will assist with application matching and delivery.

Technical data

• Article number: T543TM
• Manufacturer: Teknik Makina
• SKU: T543TM

Facts

• Shank diameter: 22 mm
• Head diameter: 50 mm
• Overall length: 46 mm
• Weight: 0.36 kg
• Cutting angle: 90°

Special features

• For WNMU 0806 indexable inserts (Kyocera)
• Number of cutting edges: 3
• Torx screw: M5x12
• Torx key: T20
• Precision metal construction

FAQ

Which indexable inserts fit this turning head?
The Corner Tool Head T543TM accepts WNMU 0806 indexable inserts; Kyocera‑compatible plates are specified for exact seating.

What shank diameter is required for mounting?
Mounting requires a 22 mm shank interface; ensure the tooling system accepts a 22 mm holder for correct fit.

How is the insert secured in the head?
An M5x12 Torx screw secures the insert; use the specified T20 key for tightening to maintain stable clamping.

Can the head be used on all lathes and toolholders?
The head is suitable for holders that accept a 22 mm shank and the standard indexable insert geometry; verify holder compatibility before installation.

What maintenance is recommended to preserve accuracy?
Keep seating surfaces clean, inspect for chips before insert replacement and tighten the Torx screw with the T20 key as required.

Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com