63mm Face Milling Head for SEET 12T3 Indexable Inserts L40mm, 45° Cutting Angle, Internal Coolant - Teknik Makina

Take advantage of the combination of 63 mm diameter, internal coolant and compatibility with SEET 12T3 indexable inserts to secure steady milling performance and repeatable surface quality; order the face milling head directly via Metav Werkzeuge or ask the consultants if needed.

Face milling head for SEET 12T3 indexable inserts — 63 mm, internal coolant | Teknik Makina

The face milling head is designed for use with SEET 12T3 indexable inserts and is intended for compact, high-stability milling applications in production and job-shop environments.

63 mm diameter for compact toolpacks
Internal coolant for improved chip evacuation
Compatible with SEET 12T3 indexable inserts
45° cutting angle for reliable finishing

High-throughput milling with consistent results

The cutter is engineered to deliver steady material removal while maintaining surface finish. With a 63 mm diameter and a 45° cutting angle, the head balances cutting forces and generates predictable chip formation, which reduces vibration and improves cycle-time stability. The 5 cutting edges distribution permits uniform wear and simple indexing, supporting efficient batch production and reduced operator intervention.

Improved tool life through internal coolant and secure fixing

Built-in internal coolant supplies cutting fluid directly to the cutting zone, supporting lubricity and cooling where it matters most; this reduces heat-induced wear and helps prevent edge chipping during interrupted cuts. Fastening is performed with M3.5x11 Torx screws (Torx key T15), ensuring reproducible clamp torque and secure insert retention for longer service intervals and safer running at elevated cutting speeds.

Precision mounting and compatibility with common toolholders

The head accepts a 22 mm shank (shank diameter 22 mm), enabling integration into compact toolpacks and modern modular holders. Compatibility with SEET 12T3 inserts simplifies stockkeeping and tool change routines, while the overall compact length (L40 mm) supports close-tolerance operations where overhang must be minimised. The design supports routine set-up workflows on CNC milling machines and machining centres.

Practical handling and maintenance for workshop efficiency

At a weight of 0.505 kg, the component is easy to handle during tool assembly and reconditioning. The tool geometry and accessible fasteners facilitate quick insert changes and straightforward cleaning of coolant passages. Clear torque practice for the specified Torx screws and routine inspection of the coolant port ensure repeatable clamping and reduced unscheduled downtime.

Application focus and production benefits

This head is suited to facing, light shoulder milling and finishing passes where compact tooling and good surface integrity are priorities. Use with appropriate insert grades optimised for the workpiece material to achieve best results; the head’s features support higher feed rates and longer unmanned cycles, making it a practical choice for industrial and precision jobbing environments.

For reliable milling performance and assured supply, request the Teknik Makina face milling head T562-1TM through Metav Werkzeuge — our consultants are available to advise on insert grades and holder compatibility and to ensure rapid delivery from Emmerich.

Technical data

• SKU: T562-1TM
• Product type: Face milling head
• Brand: Teknik Makina
• ECLASS: 21181015

Facts

• Diameter: 63 mm
• Overall length: 40 mm
• Shank diameter: 22 mm
• Weight: 0.505 kg
• Cutting edges: 5
• Cutting angle: 45°

Special features

• Compatible inserts: SEET 12T3
• Internal coolant: yes
• Torx key: T15
• Torx screws: M3.5x11
• Aufnahme (mount) dimension: 22 mm

FAQ

Which inserts fit this milling head?
The face milling head accepts SEET 12T3 indexable inserts; select the appropriate insert grade for the workpiece material and the desired surface finish.

Is internal coolant supported through the body?
Yes, internal coolant is integrated and supplies fluid directly to the cutting zone to improve tool life and chip evacuation.

What fasteners and key are required for insert clamping?
Insert clamping uses M3.5x11 Torx screws tightened with a T15 Torx key for secure and reproducible fixing.

What shank size is required for mounting?
The head is designed for a 22 mm shank interface, allowing installation in compatible modular holders and compact toolpacks.

Is the tool suitable for finishing passes?
With its 45° cutting angle and five-edge arrangement, the head is well suited to finishing and light shoulder milling where stability and surface quality are important.

Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com