63mm Corner Turning Tool Head for ANHX 1206 Indexable Inserts, 90° Cutting Angle, 27mm Shank - Teknik Makina

Choose the combination of a 90° cutting geometry, a sturdy 63 mm head and a standard 27 mm shank for reliable shoulder turning — order the T643TM directly via Metav Werkzeuge or request advice from our technical consultants.

Corner turning head T643TM by Teknik Makina — 90° head for ANHX 1206 indexable inserts, 63 mm diameter

Corner turning head T643TM is a compact turning head designed for shoulder and profile turning with ANHX 1206 indexable inserts; suitable where repeatable right‑angle cuts and stable clamping are required

• 90° cutting angle for shoulder turning
• 63 mm head diameter for stability
• 27 mm shank diameter for standard holders
• Compatible with ANHX 1206 Palbit inserts

Consistent shoulder turning with defined 90° geometry

The T643TM has a precisely machined 90° cutting angle, which provides a predictable shoulder finish and reduces the need for secondary operations. The defined angle simplifies set‑up on the lathe and helps maintain part tolerances across batches. Thanks to the 63 mm head diameter, radial stiffness is increased, reducing chatter and improving surface quality during transverse cuts.

Fast insert changes and secure clamping for production environments

A single Torx M3.5x8.5 fixing screw (Torx key T15) secures the insert, enabling quick index changes and short tool‑down times. The design supports ANHX 1206 indexable inserts from Palbit, ensuring a wide choice of grades for roughing and finishing. The combination of positive clamping and an accessible screw position reduces the likelihood of incorrect seating, so set‑up remains efficient even in mixed‑operator workshops.

Compact dimensions with industrial compatibility

With a 27 mm shank diameter and a total length of 40 mm, the holder suits standard tool posts and indexable systems, allowing straightforward integration into existing tool stations. The compact footprint makes it suitable for confined turret spaces while the head diameter balances rigidity with access to tight features. The unit weight of 0.619 kg contributes to stable dynamic behaviour without overloading the turret.

Designed for reliable batch production

Five cutting edges and a robust body geometry support repeatable performance in short to medium production runs. The construction and choice of fixing hardware prioritise uptime: fewer interventions, consistent insert orientation and dependable torque on the Torx screw. For operations where predictable cycle times and surface results matter, this tool head offers a pragmatic combination of rigidity and serviceability.

For procurement or technical clarifications regarding the Teknik Makina T643TM corner turning head, contact Metav Werkzeuge for tailored recommendations and delivery from our Emmerich stock.

Technical Data

• Article number: T643TM
• Manufacturer: Teknik Makina
• Product name: Eckmesserkopf for ANHX 1206 indexable inserts
• Brand: Teknik Makina

Facts

• Head diameter: 63 mm
• Shank diameter (take‑up): 27 mm
• Cutting angle: 90°
• Total length: 40 mm
• Weight: 0.619 kg
• Number of cutting edges: 5

Special features

• Torx screw: M3.5x8.5
• Torx key size: T15
• Compatible inserts: ANHX 1206 (Palbit)
• Application: shoulder/corner turning
• SKU: T643TM

FAQ

Which indexable inserts fit this head?
The head accepts ANHX 1206 indexable inserts; Palbit grades are compatible and commonly used with the T643TM for a range of steel and cast iron operations.

What is the shank size required in the tool post?
The T643TM requires a 27 mm take‑up or bore in the toolholder, matching standard 27 mm shank tool posts.

Is the fixing screw and key included?
The unit is specified with a Torx screw M3.5x8.5 and uses a T15 key for clamping; check the product contents at time of order for delivery scope.

Which operations is this head best suited to?
The turning head is optimised for 90° shoulder and profile turning, offering good rigidity for transverse cuts and repeatable part faces.

Can the head be used for finishing as well as roughing?
Yes — by selecting the appropriate ANHX 1206 insert grade, the T643TM can be set up for both roughing and finishing passes while maintaining consistent results.

Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com