T6 Torx Key T6, 0.1kg - Teknik Makina
€8.39
Product information "T6 Torx Key T6, 0.1kg - Teknik Makina"
Take advantage of a compact T6 size and a lightweight design combined with proven longevity for reliable, repeatable fastening in confined spaces; order the Torx key T6 directly via Metav Werkzeuge or ask our consultants if needed
Teknik Makina Torx key T6 — Compact T6 Torx key, lightweight and precise
The Torx key T6 is a compact fastening tool designed for precision assembly and maintenance tasks in workshops and production lines, offering a small footprint for tight access and consistent torque transmission
- Compact T6 size for tight spaces
- Lightweight construction — approx. 0.1 kg
- Long service life for repeated use
- Fast dispatch from stock
Precision where access is limited
A small-form T6 tool delivers accurate engagement with Torx fasteners in confined assemblies. The compact geometry ensures reliable contact between driver and screw head, reducing cam‑out and rounding. For production and repair environments this translates into fewer rework cycles and a stable process flow; the slender form factor also enables access in recesses where larger drivers cannot operate, improving throughput in tight‑tolerance work.
Consistent handling and measurable efficiency
Weighing around 0.1 kg, this key offers a noticeably low mass that reduces operator fatigue during repetitive tasks. Lower weight, combined with the standardised Torx profile, permits swift manual operations and precise small‑assembly work. The result is improved cycle times and a repeatable fastening sequence, which supports quality assurance efforts and reduces the need for costly corrective measures.
Built to last for demanding applications
Designed for extended use, the tool provides a long service life suitable for workshop and light industrial settings. The proven durability reduces replacement intervals and supports predictable maintenance planning. By favouring a tool with sustained performance characteristics, inventories become leaner and process reliability increases, contributing to overall cost-efficiency in tooling management.
Simple integration into the workshop toolkit
The compact driver is a straightforward addition to existing tool assortments and maintenance kits. Its standard T6 profile ensures compatibility with common Torx fasteners used across electronics, instrumentation and mechanical assemblies. Clear labelling and a compact footprint make storage and identification easier on crowded benches, supporting efficient workflow organisation.
Reliable supply and traceability
Sourced through an established distribution channel, this T6 key benefits from rapid fulfilment from stock and established logistics, helping to avoid production delays. Traceability via the article identifier supports inventory control and tool‑management routines, enabling maintenance planners to keep track of tooling condition and replacement needs without guesswork.
For dependable, compact fastening choose Teknik Cutting Tools’ Torx key T6 and contact Metav Werkzeuge for expert advice and fast supply from Emmerich — eMail info@metav-werkzeuge.com or call +49 2822 7131930
Technical Data
- Article number: T6TM
- SKU: T6TM
- Manufacturer: Teknik Makina
- Size: T6
- Weight: 0.1 kg
- ECLASS: 21189290
Facts
- Numerical identifier: T6TM
- Weight (kg): 0.1
- ECLASS code: 21189290
Special features
- Compact Torx profile
- Suitable for access-restricted applications
- Noted long service life in product description
- Fast dispatch / from stock
- Listed by Teknik Makina
FAQ
What size of screw is this key intended for?
The T6 size matches standard Torx fasteners specified as T6; the Torx key T6 is designed for secure engagement with that profile.
Is this tool suitable for repeated workshop use?
Yes — the key is described with a long service life, making it appropriate for frequent manual operations in assembly and maintenance.
How heavy is the driver and does that affect handling?
Weighing approximately 0.1 kg, the driver is lightweight, which supports comfortable handling during repetitive tasks and reduces operator fatigue.
Can this key reach fasteners in tight or recessed positions?
The compact geometry of the T6 profile enables access in confined spaces and recessed screw heads, improving usability in restricted assemblies.
Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
| Designation: | Torx-Schlüssel |
|---|---|
| Diameter-1: | mm |
Accessory Items
Benefit from the secure M2 thread and a Ø 2.8 mm shank combined with a low-profile 4.2 mm overall length for compact, reliable fastening; order directly via Metav Werkzeuge or consult our specialists for application advice. Torx screw TC058TM – M2 thread, Ø 2.8 mm, 4.2 mm length (Teknik Makina) The Torx screw TC058TM is a small, precision fastener intended for compact assemblies where reliable torque transfer and low profile are required M2 metric thread for fine assemblies Ø 2.8 mm shank for compact fastening 4.2 mm overall length for low-profile joins Torx drive compatible with T6 tool Precision fastening for miniature assemblies that last Small components demand consistent fixing. With an M2 metric thread and a Ø 2.8 mm shank, this screw delivers secure clamping in confined spaces while minimising material stress. The 4.2 mm overall length reduces protrusion, making it suitable for electronics housings, instrument panels and precision brackets. By specifying a standard metric thread, interchangeability and traceability in production are supported, simplifying inventory control and assembly planning. Efficient drive and consistent torque transfer for repeatable results The Torx drive geometry is engineered for axial engagement and reduced cam‑out, which improves torque application and reduces the risk of driver slippage. Compatibility with a T6 tool ensures accurate engagement in manual and powered assembly processes; this translates into faster installation times and lower rework rates. Where repeated tightening cycles are required, the combination of the Torx interface and fine M2 thread delivers reproducible clamping force and fewer damaged heads. Seamless workshop integration and procurement confidence Lightweight and compact, the fastener is supplied under SKU TC058TM by Teknik Makina and is suited to sectors that prioritise miniaturised, reliable joins. The listed mass of 0.1 kg supports straightforward handling and stocking decisions; Metav’s logistics and quality control act as a regional quality filter, ensuring consistent availability for production and maintenance demands. Specification with recognised metrics and drive types allows easy inclusion into bills of materials and maintenance spares lists. Secure supply and expert advice from Metav Werkzeuge are available for this Teknik Makina fastener — contact our procurement team at info@metav-werkzeuge.com or call +49 2822 7131930 to confirm suitability and lead times Technical Data SKU: TC058TM Thread: M2 Diameter: 2.8 mm Overall length: 4.2 mm Weight: 0.1 kg Angle: 60° Core measurements Diameter: 2.8 mm Length: 4.2 mm Thread size: M2 Angle: 60° Mass: 0.1 kg Features and compatibility Drive type: Torx Recommended tool: T6 key Brand: Teknik Makina Application: compact and precision assemblies FAQ What are the exact dimensions and thread of this screw? The Torx screw TC058TM is specified with an M2 thread, a shaft diameter of 2.8 mm and an overall length of 4.2 mm (SKU TC058TM from Teknik Makina). Which driver is recommended for installation? A T6 Torx key or driver is specified for secure engagement with the Torx drive, delivering improved torque transfer and reduced cam‑out during assembly. For which applications is this fastener suitable? This fastener is suitable for electronics enclosures, precision instruments and other compact assemblies where a low‑profile, reliable fixing is required. What is the supplied weight figure for this item? The product data provides a mass of 0.1 kg, which should be considered when planning inventory or packaging. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com