50 g Precision Pocket Scale 0.001 g Readability LCD Touch, Stainless Steel Pan, USB, 65 mm - KERN
€250.00
Product information "50 g Precision Pocket Scale 0.001 g Readability LCD Touch, Stainless Steel Pan, USB, 65 mm - KERN"
Take advantage of fine accuracy, robust handling and flexible power options to streamline small-part weighing. The compact design with a stainless steel pan and 0.001 g readability ensures reliable results for jewellery, gemstones and laboratory samples; order via Metav Werkzeuge or consult our specialists for application advice.
TGD.50-3CS05 — Precision pocket scale, 50 g capacity, 0.001 g readability (KERN)
The TGD.50-3CS05 is a precision pocket scale intended for accurate weighing of jewellery, gemstones and small laboratory samples, combining a compact housing with a hygienic stainless steel weighing surface for mobile or bench-top use.
*Readability 0.001 g for ultra-fine measurement
*Capacity 50 g with stainless steel pan
*Touch LCD with 20 mm digits, backlit
*USB power and 4 × 1.5 V AAA batteries included
Precision that supports confident decisions
The instrument delivers a readability of 0.001 g and a linearity of ±0.003 g, values that translate into dependable differentiation of minute weight changes often required in jewellery appraisal and analytical tasks. Readability specifies the smallest display increment, while linearity indicates how closely the scale's response follows a straight line across its range; together these metrics provide a clear indication of measurement quality. The reproducibility 0.003 g confirms stable repeat readings, reducing the need for repeated checks and accelerating routine workflows in retail and laboratory environments.
Built for fast handling and clear readout
A backlit LCD touch display with a 20 mm digit height simplifies reading under varied light conditions, and the touch-sensitive panel allows quick switching between units (g, ct, gn, dwt, ozt, oz) with minimal training. The stainless steel weighing pan is hygienic and easy to clean, while the fold-over cover protects the sensor from pressure and dust during transport. The scale uses a strain gauge weighing system, a common and robust technology that converts force into an electrical signal for reliable measurements; this makes routine maintenance straightforward and supports long-term consistency.
Portable design with practical power options
The housing dimensions of 96 × 149 × 36 mm and a pan diameter of 65 mm make the device genuinely portable without compromising usability. Power is provided via the included USB cable or the supplied 4 × 1.5 V AAA batteries, offering up to 150 h of operation on battery power and an AUTO-OFF function after five minutes to preserve energy. Supplied weighing dish and intuitive controls reduce setup time; the combination of compact dimensions and durable components suits shop counters, fieldwork and hobbyist use where precision must be mobile and dependable.
Contact Metav Werkzeuge to discuss how the KERN TGD.50-3CS05 precision pocket scale with 0.001 g readability fits specific jewellery, laboratory or hobby applications — our Emmerich team will advise on suitability and supply details
Technical data
- Article number: TGD
- SKU: TGD.50-3CS05
- GTIN: 4045761217904
- Manufacturer: KERN
- Country of origin: CN
Facts
- Weighing range: 50 g
- Readability: 0.001 g
- Linearity: ±0.003 g
- Reproducibility: 0.003 g
- Weighing pan diameter: 65 mm
- Display digit height: 20 mm
Special features
- Housing: plastic; weighing pan: stainless steel
- Display: LCD touch, backlit, touch-sensitive
- Units: g, ct, gn, dwt, ozt, oz
- Power: USB cable included; 4 × 1.5 V AAA batteries included
- Battery run time: up to 150 h
- Auto-off: after 5 minutes
- Weighing system: strain gauge
- Delivered as a set
FAQ
What level of accuracy can be expected from this scale?
The KERN TGD.50-3CS05 offers a readability of 0.001 g with linearity of ±0.003 g, delivering fine accuracy suitable for jewellery and small laboratory tasks.
Which units can be displayed on the scale?
The pocket scale supports grams, carats, grains, pennyweights, troy ounces and ounces (g, ct, gn, dwt, ozt, oz) selectable via the touch display on the TGD.50-3CS05.
How is the scale powered for mobile use?
Power comes from a supplied USB cable or the included 4 × 1.5 V AAA batteries; battery operation can last up to 150 h, with an AUTO-OFF function to conserve energy.
Is the weighing surface easy to clean and maintain?
Yes—the stainless steel weighing pan is hygienic and simple to wipe clean; the fold cover protects the sensor during transport and storage.
What applications are most suitable for this instrument?
The compact precision device is designed for jewellery and gemstone weighing, small laboratory analyses and hobbyist uses such as reloading where fine measurement resolution is essential.
KERN · Origin: China · Sold by Metav Werkzeuge — info@metav-werkzeuge.com · +49 2822 7131930
| Ambient temperature (max): | 35 °C |
|---|---|
| Ambient temperature (min): | 5 °C |
| Nettogewicht: | 0,98 kg |
| Reproduzierbarkeit: | 0,003 g |
| Weighing bereich (Max): | 50 g |
| Weighing pan (Ø): | 65 mm |
| Weighing system: | Dehnungsmessstreifen |
Zubehör
Take advantage of the combination of OIML F2 accuracy, finely turned stainless steel construction and compact knob form for reliable balance verification and long-term stability. Order the calibration mass directly via Metav Werkzeuge or ask our consultants for advice and suitable storage options. KERN 337-06 — OIML F2 50 g calibration mass, finely turned stainless steel The KERN 337-06 is a knob-shaped single calibration mass designed for precision verification of laboratory and industrial balances, offering traceable nominal value and handling convenience. OIML class F2 accuracy Finely turned stainless steel finish Compact knob form 18×29.5 mm Tolerance 1 mg for precise calibration Ensure measurement accuracy with an OIML F2 mass A calibration mass in OIML F2 delivers a defined tolerance suited to routine verification of precision balances. The 50 g nominal value and 1 mg tolerance provide measurable confidence when checking sensitivity and linearity of balances used in quality control. For laboratories and workshops that require reproducible weighing results, this class offers a cost-effective way to maintain measurement integrity without stepping up to higher metrological classes. Durable material and form for stable performance Manufactured from finely turned stainless steel, the mass resists corrosion and surface damage that could affect its value over time. The knob shape and smooth finish reduce handling marks, while the mass artefact geometry supports even mass distribution and thermal stability. These material and design choices reduce the frequency of recalibration and prolong the component's useful life, which supports operational uptime and predictable maintenance cycles. Practical handling and storage benefits With compact dimensions of 18×29.5 mm and a weight of 0.05 kg, the mass is convenient to store and easy to position on balance pans that accept knob-form weights. The small footprint simplifies use on tightly spaced workbenches and in analytical cabinets. Given the precise tolerance class, a protective case is recommended to prevent contamination and mechanical damage during transport and storage, thereby preserving the certified characteristics of the artefact. Compliance and application in verification routines As a class F2 single calibration mass, the item supports routine verification and in-house checks where traceability to national standards is required. The stainless-steel construction and precise machining allow consistent repeatability during comparative tests. For processes that document traceable results, incorporating a certified mass like this into scheduled verification routines helps demonstrate adherence to quality management and calibration policies. For traceable results and suitable storage solutions, choose the KERN 337-06 from Metav Werkzeuge — contact our Emmerich team by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for product advice and case recommendations Technical Data Article number: 337 SKU: 337-06 GTIN: 4045761006386 Manufacturer: KERN Facts Nominal value: 50 g Tolerance (OIML): 1 mg Weight: 0.05 kg Dimensions (cylinder): 18×29.5 mm Origin: DE Special features OIML class: F2 Form: knob form Material: finely turned stainless steel HS tariff code: 84239090 Case recommended for storage and transport FAQ What balance types can be verified with this mass? This calibration mass is suitable for verification of precision laboratory and industrial balances; the KERN 337-06 (OIML class F2, 50 g) is intended for routine checks and sensitivity tests. How precise is the 50 g mass? The mass is specified to 1 mg tolerance under OIML F2, giving a defined uncertainty appropriate for many quality-control and verification tasks. Is the material corrosion resistant? Yes. The finely turned stainless steel construction minimises corrosion risk and surface changes that could affect the mass value. Should the mass be stored in a case? A protective case is recommended because the precise tolerance of the KERN 337-06 requires careful handling and protection from contamination and mechanical damage. Does this mass come with traceability information? The product is supplied as an OIML class F2 single calibration mass; for formal calibration certificates or traceability to national standards, please enquire with Metav Werkzeuge. Manufacturer: KERN, Germany — Contact via Metav Werkzeuge: info@metav-werkzeuge.com, +49 2822 7131930