Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
12 mm Ceramic Gauge Ball (Si3N4) 0.003 mm Accuracy, HV1400-1700 Hardness - Metav IndustryLine
Take advantage of the combination of extreme dimensional stability, ceramic wear resistance and laboratory-grade accuracy for reliable reference measurements; order the ceramic gauge ball directly via Metav Werkzeuge or consult the measurement specialists for application advice. Ceramic gauge ball (Si3N4), 12 mm — 0.003 mm accuracy (Metav IndustryLine) Ceramic gauge ball (Si3N4) intended as a compact, high-precision reference sphere for gauges, measurement stands and inspection jigs in metrology and quality control. 12 mm diameter for precise reference Accuracy 0.003 mm for tight tolerances Silicon nitride (Si3N4) with HV1400–1700 Low roughness Ra 0.00001 for smooth contact Reduce measurement uncertainty with a compact reference sphere A small, well characterised reference sphere reduces uncertainty in comparative checks and gauge calibration. The 12 mm diameter and 0.003 mm stated accuracy make this sphere suitable where repeatable point contacts are required; the specified tolerance 0.00008 mm ensures the nominal diameter presents minimal scatter. For workshops and inspection benches this translates into faster decision-making in go/no-go checks and stable baseline readings for coordinate measuring procedures. The compact format supports tight fixturing while maintaining reproducible contact geometry. Engineered for repeatability and long service life Manufactured from Si3N4 (silicon nitride), the sphere combines low density with high fracture resistance and a surface hardness of HV1400–1700, offering excellent wear performance in frequent-contact applications. Surface finish at Ra 0.00001 minimises micro-asperity influence on contact points, so tactile probes and optical systems encounter consistent interaction. The modest mass (0.08 kg) and robust material behaviour reduce the risk of handling-induced damage while preserving measurement integrity over long-term use, lowering the need for frequent replacement. Seamless integration into inspection workflows The sphere functions as a reference element in master rings, three-point supports and precision nests used in dimensional inspection. As a measuring artefact it is useful for comparative verification of probes, repeatability tests and as a reference for small-part gauging. Traceable identification via M318.442 and the compact form factor allow easy storage and rapid deployment on the workshop bench or in the inspection lab. Compatibility with standard metrology fixtures means minimal adaptation effort when introducing this ceramic gauge into existing quality-control sequences. For assured precision from Metav IndustryLine, contact Metav Werkzeuge in Emmerich to discuss the Ceramic gauge ball (Si3N4) M318.442 and its suitability for the intended measurement task. Technical Data Article number: M318.442 GTIN: 4054469184418 Label: Ceramic gauge ball (Si3N4), 12 mm, accuracy 0.003 mm Numbers / Core technical data Diameter: 12 mm Accuracy: 0.003 mm Diameter tolerance: 0.00008 mm Surface roughness Ra: 0.00001 Hardness: HV1400–1700 Weight: 0.08 kg Special features Material: Ceramic (Si3N4) Application: Gauges, dimensional reference sphere Category: Lehren (gauges) SKU: M318.442 FAQ Is the ceramic gauge ball suitable as a reference for probe calibration? The Ceramic gauge ball (Si3N4) is suitable as a stable reference sphere within probe verification routines and comparative calibration setups where a 12 mm master sphere meets the test requirements. What level of dimensional precision can be expected from this sphere? The sphere offers an accuracy of 0.003 mm with a diameter tolerance of 0.00008 mm, enabling tight tolerance checks and reliable repeatability in small-part inspection. How does the material affect durability and handling? Made of silicon nitride, the gauge ball combines high surface hardness (HV1400–1700) with low wear characteristics, so M318.442 maintains contact integrity under frequent use and minimises surface degradation. Can this sphere be used in both workshop and laboratory environments? Yes; the compact form and high surface finish allow the sphere to serve reliably in workshop inspection benches and in laboratory settings where a small, precise reference element is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12 mm Gauge Ball Pair Chrome Steel Hardened 0.003 mm Accuracy, 0.00008 mm Diameter Tolerance - Metav IndustryLine
Benefit from a matched pair of hardened reference spheres offering 12 mm diameter, 0.003 mm accuracy and an ultrafine surface finish for repeatable, traceable checks in inspection and fixture set‑up. Order the pair via Metav Werkzeuge or consult our specialists for application advice. Gauge Ball Pair M318.422 – 12 mm hardened chrome steel, 0.003 mm accuracy (Metav IndustryLine) The Gauge Ball Pair M318.422 is a compact metrology accessory for precision reference and comparative measurement in gauges, fixtures and calibration routines. 12 mm diameter with 0.003 mm accuracy Hardened chrome steel, >HRC 62 Matched pair for reference and calibration Surface roughness Ra 0.00001 Precise reference for inspection and fixture alignment The pair of precision spheres serves as a stable reference for dimensional checks, runout tests and alignment procedures. With a declared accuracy of 0.003 mm and a diameter tolerance of 0.00008 mm, the parts provide consistent, reproducible contact points for comparative gages, optical systems and tactile probes. The hardened chrome steel construction ensures high wear resistance (greater than HRC 62), which preserves form and diameter during frequent use and reduces drift in long‑term measurements. Using matched spheres minimises systematic error when swapping or comparing reference points. Surface quality and metrological reliability explained A very low surface roughness (Ra 0.00001) reduces micro‑asperity effects at the contact interface, improving repeatability when used with ball plates, vee blocks or probe tips. For tactile probing and optical inspection alike, smoother surfaces mean more reliable point detection and smaller measurement scatter. The set configuration of two matched balls enables comparative checks and simple interchangeability in fixtures, shortening set‑up time and increasing throughput in quality control routines. The lightweight nature (approx. 0.05 kg per set) simplifies handling while maintaining stability during contact measurement. Practical advantages in workshop and laboratory environments Built as a pair and supplied as a set, these spheres are intended for everyday metrology tasks where accuracy and durability are required without complex handling. The chrome steel material offers corrosion resistance useful in standard workshop atmospheres; the matched pair format supports quick replacement of worn references without extensive requalification. For production inspection, the combination of tight diameter tolerance and hardened material translates directly into fewer rejected measurement runs and reduced rework. The spheres are versatile: suitable for gauge verifications, alignment of spindles and workholding checks. Contact Metav Werkzeuge for tailored advice on integrating the Metav IndustryLine gauge ball pair M318.422 into existing measurement setups or to request a quotation from our Emmerich team Technical data Article number: M318.422 GTIN: 4054469184104 SKU: M318.422 Set contents: 2 pieces Diameter: 12 mm Material: hardened chrome steel Weight (set): 0.05 kg Facts Accuracy: 0.003 mm Diameter tolerance: 0.00008 mm Surface roughness (Ra): 0.00001 Hardness: > HRC 62 Special features Matched pair for reference and calibration Intended for gauges and precision checking Low surface roughness for high repeatability Durable, wear‑resistant chrome steel FAQ What accuracy can be expected from the gauge ball pair? The gauge ball pair M318.422 (Metav IndustryLine) is specified with an accuracy of 0.003 mm, providing reliable reference points for inspection tasks. Are the balls supplied as a matched set? Yes, the product is delivered as a matched set of two pieces, enabling direct comparative use and simple replacement in fixtures. What material and hardness are used for these spheres? The spheres are manufactured from hardened chrome steel with a hardness specification above HRC 62, ensuring long service life under repeated contact. Can these spheres be used for probe and CMM checks? The matched pair and fine surface finish make the M318.422 suitable as reference spheres for tactile probes and many optical inspection arrangements. What tolerances and surface quality are specified? Diameter tolerance is 0.00008 mm and surface roughness is 0.00001 (Ra), which together support high repeatability in precision measurement workflows. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12 mm Limit Gauge Pin With Wear Allowance, Hardened Steel, DIN 7162 - Filetta
Take advantage of the combination of hardened steel construction, DIN 7162 conformity and a built‑in wear allowance on the go side for reliable go/no‑go checks and long service life. Order the limit gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Limit gauge pin – 12 mm, hardened steel (Filetta) The limit gauge pin is a hardened‑steel plug gauge designed for quick go/no‑go diameter checks and conformity inspection to DIN 7162 in workshop and inspection environments. Hardened steel construction Conforms to DIN 7162 for plug gauges 12 mm nominal diameter Wear allowance on the go side Consistent inspection performance for production control The limit gauge pin provides a compact, robust solution for repetitive acceptance checks where consistent tactile feedback and repeatability are required. Made from hardened steel, the pin resists deformation and preserves its tolerance band during frequent handling, so inspection intervals remain predictable. Conformity to DIN 7162 ensures compatibility with established go/no‑go inspection procedures, simplifying integration into existing quality checks and reducing stoppages caused by ambiguous results. Durable design that minimises downtime A hardened, ground construction and the specified wear allowance on the go side extend usable life and enable predictable replacement scheduling. The wear allowance is a deliberate oversize on the good (go) face that compensates for gradual surface loss without affecting the no‑go function; this reduces the risk of false passes and helps keep rework rates low. The simple geometry of a plug gauge also allows rapid manual handling and reduces the time required for routine dimension verification in production and assembly operations. Practical fit for workshop and inspection use Designed for straightforward go/no‑go diameter verification, the pin suits machining workshops, toolrooms and incoming inspection stations where quick, unambiguous checks are needed. The combination of a plain cylindrical form and DIN 7162 standardisation supports easy comparison across gauges and fixtures. Traceability is supported by the clear article designation (MS911.216) and concise specification, so the gauge can be referenced in inspection reports and procurement lists without ambiguity. Contact Metav Werkzeuge for procurement and technical guidance on Filetta limit gauge pins; our Emmerich team provides fast delivery and product advice Technical Data Article number: MS911.216 Name: Limit gauge pin Material: hardened steel Standard: DIN 7162 Specifications Nominal diameter: 12 mm Special features Wear allowance on the go side Hardened and ground construction Intended for go/no‑go diameter checks FAQ What is the primary application of this gauge? The Filetta limit gauge pin (MS911.216) is intended for quick go/no‑go checks of bore and shaft diameters according to DIN 7162 for production and inspection tasks. How does the wear allowance affect use? The built‑in wear allowance on the go side extends service life by compensating for surface wear, so the Filetta plug gauge maintains reliable go/no‑go performance over many cycles. Is the material suitable for workshop handling? Yes, the hardened steel construction of this gauge pin provides resistance to deformation and wear, making it suitable for regular workshop and inspection use. Which standard does the gauge follow and why is that important? Conformance to DIN 7162 ensures the plug gauge meets recognised geometric and dimensional criteria, simplifying its integration into standardised inspection procedures and documentation. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
12 mm Limit Plug Gauge H7, Hardened Gauge Steel DIN 2245 - Metav IndustryLine
The product data contain contradictory entries that prevent a reliable description from being generated. Specifically, the item is simultaneously flagged as both rejected and as acceptable, and the recorded weights conflict; these inconsistencies make it impossible to determine the product’s actual condition and technical specifications. Such discrepancies hinder the creation of a clear and accurate product description, which is essential for meeting standards and ensuring usability. Please correct the dataset—confirm the quality status and supply a single, consistent weight value—so a full, standards-compliant product text can be produced. If assistance is required to resolve the discrepancies, Metav’s data team can help clarify the correct entries before a description is created. Addressing these issues promptly will ensure the product information is both reliable and useful.
12 mm Limit Plug Gauge Wear Allowance, Hardened Steel, DIN 7162 - Filetta
Take advantage of robust hardened steel construction and DIN 7162 conformity to secure reproducible bore checks; the built‑in wear allowance on the good side extends service life and simplifies limit interpretation. Order the Filetta items via Metav Werkzeuge or contact our consultants for application advice. Limit plug gauge by Filetta — hardened steel, DIN 7162, Ø 12 mm, G7 Limit plug gauge designed for rapid acceptance checks of internal diameters in production and incoming‑goods inspection Hardened steel for durable measurement Conforms to DIN 7162 standard Wear allowance on the 'go' side Reliable diameter assessment that speeds inspection throughput The limit plug gauge serves as a straightforward go/no‑go check for cylindrical bores, offering rapid verification without complex setup. Machined to a nominal diameter of 12 mm with the designation G7, the pin provides an immediate pass/fail indication that reduces inspection time compared with full dimensional measuring chains. The hardened construction minimises deformation under repeated use, which keeps the checking routine stable and helps maintain production rhythm. For shop floors and control benches where speed and repeatability matter, the gauge translates metrological specification into a clear decision at the point of measurement. Durable design that reduces replacement and downtime Made from hardened steel, the gauge withstands frequent handling and contact with metal workpieces. A specific wear allowance on the good side compensates for gradual material loss, so the go end retains acceptance criteria longer and service intervals are extended. This pragmatic feature lowers life‑cycle costs by delaying the need for reworking or replacement and by keeping inspection standards consistent. The combination of robust material and wear management supports continuous operation in industrial environments where tools are subject to intensive use. Simple integration into quality processes and documentation Conforming to DIN 7162 assists traceability in formal inspection plans and quality records. The plug gauge is suitable for routine acceptance checks in production, final inspection and incoming goods control where clear binary results are preferred. The concise form factor and unambiguous results streamline operator training and reduce human decision variance, which improves overall process capability. When used as part of a calibrated inspection set, the gauge helps to demonstrate compliance and to maintain documented control over critical bore dimensions. Practical benefits for workshop and production use This gauge simplifies everyday metrology: no complex calibration rigs are required for routine use, and the hard wearing surface minimises surface damage to both gauge and workpiece. The compact geometry facilitates access to bores in assemblies and jigged components, while the standardised dimensioning and tolerance marking enable easy cross‑referencing with drawing specifications. For manufacturing teams seeking dependable, low‑effort tools for Go/No‑Go inspection, the pin combines industrial robustness with clear operational benefits. Choose the Filetta limit plug gauge with G7 tolerance via Metav Werkzeuge for dependable in‑process checks; contact Metav Werkzeuge in Emmerich for tailored advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: MS911.174 Product: Limit plug gauge Brand: Filetta Facts Nominal diameter: 12 mm Standard: DIN 7162 Designation: G7 Special features Material: hardened steel Wear allowance on the go side Intended for go/no‑go bore inspection FAQ What size bore is this gauge intended to check? The gauge is supplied as a 12 mm nominal limit plug gauge and is intended for quick go/no‑go checks of bores matching that nominal diameter. Is the gauge suitable for production use on a shop floor? Yes, the hardened‑steel construction and the wear allowance on the good side make the gauge robust enough for routine production and incoming‑goods inspection. How does the G7 designation influence measurement results? G7 is the designation provided with the article and identifies the tolerance fit intended for interpretation against corresponding drawing tolerances when using the plug gauge. Does the gauge comply with industry standards? The item is produced to conform with DIN 7162, facilitating inclusion in standard inspection procedures and documentation. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
12 mm Setting Ring Form C Hardened Gauge Steel DIN 2250, JS3 - Metav IndustryLine
Take advantage of a compact, 12 mm setting solution that combines DIN 2250 conformity with hardened, lapped gauge steel for dependable repeatability in workshop and inspection routines; order the setting ring directly via Metav Werkzeuge or ask the consultants for tailored advice. M313.012 12 mm setting ring – ring gauge, DIN 2250, hardened gauge steel (Metav IndustryLine) M313.012 12 mm setting ring designed as a precision reference for setting and checking diameters in production and quality control environments. DIN 2250 / DIN 286, tolerance JS 3 Hardened and lapped gauge steel Form C ring geometry for axial stability 12 mm diameter setting gauge Accurate reference for quick, repeatable setups This ring gauge serves as a stable reference for setting tools, gauges and fixtures, reducing setup time and process variation. Conformance to DIN 2250 and DIN 286 with tolerance JS 3 ensures a well-defined limit for go/no-go checks and tool offsets. The compact 12 mm diameter and Form C geometry keep the contact area controlled, which improves repeatability during successive measurements and minimises rework in batch production. Durable construction that protects measurement integrity Manufactured from hardened, lapped gauge steel, the component resists wear and maintains its calibrated form under regular workshop use. The lapping process refines the contact surfaces to remove micro-irregularities, translating into reliable mating to shafts or pins and consistent measuring performance over time. For inspection tasks where mechanical stability matters, the material choice and surface finish contribute directly to longer service life and less frequent replacement. Practical integration into inspection and tooling workflows The ring is compact and straightforward to handle, making it suitable for bench metrology or as a fixed reference in assembly jigs. As a standardised gauge, it simplifies documentation and process control: records can reference the DIN 2250 family and the specific tolerance band to support traceability. The ring gauge's simple geometry facilitates visual checks and swift tactile verification, which benefits operators and quality engineers seeking pragmatic, low-overhead solutions for diameter control. For procurement or technical guidance on specifying the right gauge for a production line, contact Metav Werkzeuge in Emmerich for expert advice and delivery options Technical data SKU: M313.012 GTIN: 4054469120508 Tariff number: 90173000 Facts Diameter: 12 mm Standards: DIN 2250, DIN 286, tolerance JS 3 Eclass: 21170104 Special features Form C geometry Hardened and lapped gauge steel Category: Gauges / Setting rings Label description: Setting ring 12 mm, DIN 2250, hardened gauge steel FAQ What tolerance class does this ring adhere to? The ring conforms to DIN 2250 and DIN 286 with tolerance JS 3, providing a defined limit for go/no-go assessments and setup referencing. Which materials and finishes are used for this gauge? The M313.012 is made of hardened, lapped gauge steel, a finish chosen to resist wear and ensure consistent contact geometry during repeated use. Is this ring suitable for production and laboratory use? Yes. The combination of DIN standard conformity, hardened material and compact Form C geometry makes it appropriate for both workshop setups and controlled inspection tasks. How is this product identified for ordering? Order using SKU M313.012 (GTIN 4054469120508) to ensure the correct 12 mm setting ring from Metav IndustryLine is supplied. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12.01mm Test Pin Length 50mm Workshop Version - Metav IndustryLine
Take advantage of the combination of precise tolerance, robust workshop construction and compact length for dependable inspection work. The clear diameter of 12.01 mm and the fine ±0.002 mm tolerance make this tool suitable for repeatable gauging tasks; order the gauge pin directly via Metav Werkzeuge or ask our consultants if additional information is required. Gauge pin, single — 12.01 mm Ø, 50 mm length (Metav IndustryLine) A gauge pin, single, 12.01 mm designed as a hardened datum for accurate bore checking and end‑measurement tasks in workshop metrology. 12.01 mm diameter 50 mm length Tolerance ±0.002 mm Workshop execution Repeatable inspection with micrometre-level tolerance The compact design provides a consistent datum for go/no‑go checks and comparative gauging tasks. Manufactured for high repeatability, this gauge pin features a defined diameter of 12.01 mm and a declared tolerance of ±0.002 mm, which supports reliable part verification and reduces downstream rework. The narrow tolerance converts directly into measurable process stability, so inspection steps become a dependable part of the production chain rather than a variable. Robust materials and workshop-ready construction Made from special steel for wear resistance and dimensional stability, the pin resists deformation under typical handling and fixture loading. The 50 mm length gives sufficient engagement for many bore depths while remaining easy to handle on the shop floor. The workshop version finish balances hardness and serviceability, ensuring long life in daily use and straightforward cleaning between shift changes to preserve measurement integrity. Practical use in production and assembly control The pin suits inline inspection, fixture calibration and quick functional checks during assembly. Its compact form and narrow tolerance help to verify critical bores and mating features during incoming inspection or final assembly checks. Integration into existing gauging sets or shadow boards is straightforward, and traceable marking such as the SKU allows consistent inventory and replacement planning in the quality workflow. Select the Metav IndustryLine gauge pin M323.C01 for consistent bore verification and contact Metav Werkzeuge for precise delivery from Emmerich and expert advice on integration into existing inspection procedures Technical data Article number: M323.C01 GTIN: 4061905064326 Label: Prüfstift, einzeln, 12,01 mm Länge 50 mm Core dimensions Diameter: 12.01 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Materials & special features Material: Special steel Workshop execution Single gauge pin, hardened datum FAQ Is this gauge pin suitable for routine bore checks in the workshop? The Metav IndustryLine gauge pin M323.C01 is intended for routine bore verification and assembly checks thanks to its workshop execution and fine tolerance of ±0.002 mm. What material is the pin made from and how durable is it? The pin is made from special steel, providing a balance of hardness and wear resistance for sustained use in inspection routines. Can the pin be used as a datum in fixture setup? Yes, the 50 mm length and precise diameter make the pin suitable as a hardened datum in many fixture and alignment tasks. How is the product identified for inventory and traceability? Identification is possible via the article number M323.C01 and GTIN 4061905064326 for straightforward inventory control Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12.02mm Test Pin Length 50mm Workshop Version, Special Steel in Case - Metav IndustryLine
Take advantage of precise end-measurement performance, robust workshop construction and straightforward handling for reliable inspection routines; the combination of 12.02 mm diameter, ±0.002 mm accuracy and a 50 mm length supports consistent go/no‑go checks. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin, single — 12.02 mm diameter, 50 mm length (Metav IndustryLine) The Gauge pin, single, 12.02 mm diameter, 50 mm length is a workshop-grade cylindrical reference designed for end measurements, pin gauging and simple interchange tests in production and maintenance environments. Workshop version for everyday use Diameter 12.02 mm with ±0.002 mm accuracy Length 50 mm for end-measurements Supplied in transport case Repeatable, verifiable end‑measurements for inspection workflows A compact cylindrical reference delivers measurable benefits in process control. The 12.02 mm diameter with an accuracy of ±0.002 mm provides a reliable basis for quick go/no‑go checks and comparative measurements on production lines. Using a stable, single‑diameter gauge pin reduces setup time for checking bores and fit tolerances, so inspection cycles run more efficiently and non‑value time is minimised. Robust design that withstands workshop conditions Built as a workshop version from special steel, this measuring pin is engineered for frequent handling and routine use. The 50 mm shank gives sufficient mass to avoid accidental bending during short measurements while remaining easy to position by hand. The construction focuses on wear resistance and repeatability, supporting durable service life in busy maintenance and fabrication areas where tools are handled often. Simple integration into existing tool sets and fixtures The single‑piece gauge pin is straightforward to use alongside existing gauges, jigs and handheld comparators. Its plain cylindrical geometry makes it suitable as a quick reference for bore checks, fixture verification and as a physical standard for comparative measurements. Supplied in a transport case, the pin is protected during storage and transit, ensuring the preserved condition of the reference surface between uses. Contact Metav Werkzeuge today to discuss Metav IndustryLine gauge pins for dependable end‑measurement control and to arrange supply or technical clarification Technical data Article number: M323.C02 SKU: M323.C02 GTIN: 4061905064760 Label: Gauge pin, single, 12.02 mm diameter, length 50 mm Facts Diameter: 12.02 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Version: Workshop execution Delivery: Transport case Category: Gauge pins FAQ What tolerance does this gauge pin offer? The gauge pin provides an accuracy of ±0.002 mm, making it suitable for precise go/no‑go checks and repeatable reference measurements with the Metav IndustryLine gauge pin (SKU M323.C02). Can the gauge pin be used for bore checks and fit verifications? Yes, the single‑diameter design serves as a simple reference for bore checks, fit verifications and quick interchange tests in production and maintenance tasks. What are the dimensions of the pin? The measuring diameter is 12.02 mm and the overall usable length is 50 mm, with a total weight of approximately 0.1 kg. How is the pin delivered and protected? The pin is supplied in a transport case to protect the reference surface during transit and storage, preserving measurement integrity. Is this product suitable for everyday workshop use? The Metav IndustryLine gauge pin is a workshop execution intended for frequent handling, offering robust performance and straightforward integration into routine inspection procedures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12.03mm Test Pin Length 50mm Workshop Finish - Metav IndustryLine
Taking advantage of tight tolerance and robust construction, this gauge pin combines high repeatability (±0.002 mm) with a 12.03 mm diameter and a compact 50 mm length for reliable in‑process checks; order directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin, single Ø 12.03 mm, length 50 mm — Metav IndustryLine workshop version Gauge pin, single Ø 12.03 mm, length 50 mm is a precision ground inspection pin for reference measurements, fit checks and alignment tasks in workshop and production metrology. Precision ground to ±0.002 mm Diameter 12.03 mm, length 50 mm Made from special steel, workshop execution Single-piece design for repeatable reference Consistent inspection from a compact reference The gauge pin delivers measurable repeatability thanks to a declared tolerance of ±0.002 mm, a level of accuracy that supports tight go/no-go fits and fine inspection routines in component production. Machined from special steel, the pin resists wear and preserves its geometry across repeated seating and insertion cycles, which reduces rework and non‑conformances. Where traceable reference dimensions are required on the shop floor, this inspection pin functions as a robust, low‑complexity standard for quick dimensional verification. Practical dimensions that simplify handling and layout With a diameter of 12.03 mm and a length of 50 mm, the test pin is compact yet long enough to engage bore features and locating holes without excess overhang. The modest mass and short profile make it straightforward to seat in fixtures, jigs or test rigs, improving handling ergonomics and reducing measurement variability caused by operator influence. The single‑piece configuration avoids stacking tolerances and makes the item suitable for repetitive checks where consistent contact geometry matters. Integration into production and quality workflows Designed for workshop and light industrial use, this inspection pin serves as a dependable reference in assembly, inspection and setup operations. The hardened surface and precise ground shank support repeatable positioning in fixtures and aid rapid conformity checks during series production. For procurement and inventory control, the part is identifiable by SKU M323.C03 and GTIN 4061905064777, which simplifies traceability within quality documentation and material lists. Contact Metav Werkzeuge for ordering or technical selection support from Emmerich’s metrology specialists Technical Data Article number: M323.C03 GTIN: 4061905064777 SKU: M323.C03 Brand: Metav IndustryLine Label: Prüfstift, einzeln, 12,03 mm Länge 50 mm Facts Diameter: 12.03 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Version: workshop execution Single piece inspection pin Category: gauge pin / test pin Intended use: reference measurement and fit checks FAQ What tolerance is guaranteed for this gauge pin? The specified tolerance for the gauge pin is ±0.002 mm, providing high repeatability for fit and inspection tasks. Is the pin suited for repeated seating in hardened fixtures? Yes, the special steel construction and ground finish make the pin suitable for repeated seating in fixtures used for assembly and inspection. Can this pin be used as a reference for centre‑line alignment in jigs? The 50 mm length and precise shank diameter are suitable for positioning and alignment duties; the pin is commonly applied as a reference element in jigs and test rigs. How is the item identified for stocking and traceability? The item is listed under SKU M323.C03 and GTIN 4061905064777, which supports clear identification in procurement and quality records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12.04mm Gauge Pin Length 50mm Workshop Finish - Metav IndustryLine
Take advantage of the combination of tight tolerance (±0.002 mm), special-steel construction and a compact 50 mm length for consistent end-dimension checks. Order the gauge pin directly via Metav Werkzeuge or request advice from our technical consultants. Gauge pin M323.C04 — 12.04 mm Ø, 50 mm length (Metav IndustryLine) A gauge pin designed for precise final-dimension checks and robust workshop use Diameter 12.04 mm precision Tolerance ±0.002 mm accuracy Workshop-grade special steel 50 mm length for final-dimension checks Consistent accuracy for reproducible quality control The compact cylindrical design delivers repeatable contact geometry, with a diameter of 12.04 mm and a verified tolerance of ±0.002 mm, making it suitable for high‑precision gauging and end‑dimension verification. The tight tolerance reduces measurement uncertainty during pass/fail inspections and in assembly checks, enabling straightforward decisions on part conformity. This level of accuracy supports process stability in serial testing and small‑batch production, where reproducibility is essential. Robust material and workshop-ready handling Manufactured from special steel, the pin combines wear resistance with dimensional stability under normal workshop conditions, ensuring a long service life when used for routine gauging. The 50 mm overall length provides a practical balance between reach and rigidity, reducing flex during insertion into bores or features. The workshop execution emphasises durability and straightforward handling for bench and fixture use, while keeping maintenance simple and predictable. Practical application and traceable identification Supplied as a single piece with a clear article reference, the pin is intended primarily for final‑dimension checks and end‑measurements in metalworking setups. Typical applications include bore verification, alignment checks and fixture validation in machine shops. The compact mass also minimises impact on delicate assemblies during inspection. For traceability and procurement, the article is identified by SKU M323.C04 and GTIN 4061905064784, facilitating inventory management and quality documentation. For measurements that demand ±0.002 mm reliability, contact Metav Werkzeuge for availability and technical guidance via info@metav-werkzeuge.com or +49 2822 7131930 — Metav IndustryLine specialists will advise on suitability and supply. Technical data SKU: M323.C04 GTIN: 4061905064784 Label: Prüf​stift, einzeln, 12,04 mm Länge 50 mm Manufacturer: Metav IndustryLine Core specifications Diameter: 12.04 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Materials & features Material: Special steel Version: Workshop execution Delivery: Single piece Intended use: Final‑dimension checks / end measurements FAQ What is the nominal diameter and tolerance of this gauge pin? The gauge pin is manufactured to a nominal diameter of 12.04 mm with a stated tolerance of ±0.002 mm, providing tight control for verification tasks. Is this product suitable for repetitive bore checks in a production environment? Yes, the M323.C04 gauge pin from Metav IndustryLine is designed for routine end‑dimension checks and offers the dimensional stability required for repetitive bore inspections. What material is used and how does it affect durability? The pin is made from special steel, chosen for wear resistance and dimensional stability under typical workshop conditions, which enhances service life during frequent use. How is the product identified for procurement and documentation? The article is listed as SKU M323.C04 and carries GTIN 4061905064784 to support ordering and traceability in inventory or quality systems. Can the pin be used for alignment checks in fixtures? Yes, the 50 mm length and precise diameter make the pin suitable for alignment and fixture validation, where a stable datum and repeatable contact are required. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12.05mm Gauge Pin Length 50mm Workshop Version, Special Steel - Metav IndustryLine
Taking the combination of measured repeatability, robust workshop design and a special-steel construction provides dependable results for end‑dimension checks; order this precision gauge pin directly via Metav Werkzeuge or consult our specialists for specification advice. Gauge pin M323.C05 — Test pin, 12.05 mm diameter, 50 mm length (Metav IndustryLine) A gauge pin, single item, 12.05 mm diameter and 50 mm length, intended for end‑dimension inspection and routine workshop measurement tasks. Workshop-grade design for daily use High precision ±0.002 mm tolerance Special-steel construction for durability Single gauge pin for targeted inspection Keep production tolerances under control with micrometric repeatability This inspection pin delivers ±0.002 mm repeatability, a tolerance level that supports tight quality criteria in assembly and inspection environments. The nominal diameter of 12.05 mm and a length of 50 mm produce a stable contact surface that translates into reproducible measurements across successive checks. Such dimensional stability reduces scrap rates and rework, improving throughput without adding complexity to existing gauge benches or plug‑gauge fixtures. The emphasis is on measurable benefit: consistent results, fewer stoppages and predictable quality outcomes. Built for workshop conditions and frequent handling Designed as a workshop variant, the component combines practical handling with corrosion‑resistant special steel for extended service life under daily use. The compact geometry and balanced mass (approx. 0.1 kg) make the pin easy to position in bores or alignment jigs while resisting premature wear. The single‑item supply is suitable for targeted inspection points where bespoke checks are required rather than bulk gauge sets. Robust material choice and a simple geometry lower maintenance needs and keep calibration intervals manageable, supporting continuous operation on the shop floor. Simple to incorporate into measurement and assembly routines The pin integrates smoothly into existing verification sequences, from first‑off inspections to in‑process checks and final acceptance trials. Use as a reference mandrel, plug gauge or alignment aid in fixtures that require a reliable datum of 12.05 mm. The compact length of 50 mm minimises bending moment in handheld checks and eases handling in confined setups. Marked traceability (SKU M323.C05) by the manufacturer facilitates inventory control and makes replacement straightforward when pins are rotated through wear cycles. The result is faster decision‑making and fewer interruptions to production flow. For supply and specification advice on the Metav IndustryLine gauge pin (M323.C05), contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 for a tailored recommendation Technical data Article number: M323.C05 GTIN: 4061905064791 Brand: Metav IndustryLine Label: Gauge pin, single, 12.05 mm diameter, 50 mm length Core specifications Diameter: 12.05 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Features Workshop version Material: special steel Single item delivery Application: end‑dimension checks FAQ What is the dimensional tolerance of this gauge pin? The gauge pin from Metav IndustryLine (M323.C05) has a specified tolerance of ±0.002 mm, suitable for precise end‑dimension verification. Which material is used for the pin and what does that mean for durability? The test pin is made from special steel, chosen to provide wear resistance and stable performance under routine workshop use. Can this pin be used as an alignment mandrel in fixtures? Yes, the 12.05 mm diameter and 50 mm length make the pin suitable as an alignment mandrel or plug in many fixture and assembly applications. How is the product supplied and identified for inventory? The item is supplied as a single gauge pin; identification is via the article number M323.C05 and GTIN 4061905064791 for straightforward stock management. Is this pin appropriate for handheld in‑process checks? The compact length and balanced mass make the component practical for handheld checks where short, repeatable contact is required. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12.07mm Gauge Pin 50mm Length Workshop Finish - Metav IndustryLine
A compact workshop gauge pin combining robust special-steel construction, a 12.07 mm diameter with ±0.002 mm tolerance and a 50 mm working length delivers reliable repeatable locating and end-measure checks; order directly via Metav Werkzeuge or consult the technical team for application advice. Gauge pin, single, 12.07 mm diameter — 50 mm length (Metav IndustryLine) A gauge pin (12.07 mm, 50 mm length) designed for precise locating and end-measure verification in workshop and fixture applications. Workshop-grade construction Diameter 12.07 mm for precision fits Tolerance ±0.002 mm for repeatability 50 mm special-steel body for durability Precise locating and repeatable measurements for production control The pin is engineered for repeatable positioning and end‑measurement tasks, with a diameter of 12.07 mm held to ±0.002 mm. This level of precision supports tight tolerances in jigs, fixtures and gauge sets and reduces rework by providing a stable datum for dimensional checks. The specified accuracy is consistent with workshop‑grade inspection tools and enables quick verification of bores and positional references without complex setup. Durable construction suited to frequent workshop use Constructed from special steel in a workshop version, the pin withstands routine handling and offers wear resistance for repeated insertion and withdrawal cycles. The 50 mm length provides sufficient engagement for many locating and end‑measure situations while remaining compact and easy to manipulate during assembly or checking tasks. Supplied as a single gauge pin, the item integrates readily into existing gauge sets and fixture arrays. Practical benefits for inspection and fixture building Using a dedicated gauge pin simplifies alignment of components and streamlines end‑of‑line checks; the precision diameter and low runout expectation support consistent results across repeated measurements. The product is designed for pragmatic workshop use rather than laboratory-only environments, combining precision, robustness and simple handling to improve throughput in production and maintenance operations. Contact Metav Werkzeuge for application guidance, compatibility checks and a bespoke delivery estimate for this 12.07 mm workshop gauge pin Technical data SKU: M323.C07 GTIN: 4061905065538 Material: Special steel Category: Gauge pin, single Facts Diameter: 12.07 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Workshop version Single item supply Suitable for end‑measure and locating tasks Robust construction for frequent use FAQ What level of accuracy can be expected from this gauge pin? The gauge pin is manufactured to a tolerance of ±0.002 mm, making it suitable for precise locating and repeatable end‑measure checks in workshop environments. Which material is used for the pin and how does it affect durability? The pin is made from special steel, selected to provide wear resistance and longevity under frequent insertion and withdrawal typical for workshop use. Is this pin delivered as a single item or in sets? This product is supplied as a single gauge pin (SKU M323.C07), intended for integration into existing gauge sets or fixture arrangements. For which applications is the 50 mm length most suitable? A 50 mm working length gives adequate engagement for many locating and end‑measurement tasks while remaining easy to handle in assembly, inspection and fixture building. Can this pin be used for precision bore gauging and fixture alignment? Yes; the 12.07 mm diameter combined with ±0.002 mm tolerance makes the pin suitable for bore checking and accurate alignment duties in a workshop setting. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12.08mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
A compact inspection solution that combines ±0.002 mm tolerance with a nominal diameter of 12.08 mm and a practical 50 mm length, enabling reliable pass/fail checks and repeatable gauging in workshop environments. Order this gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.C08 – single, Ø 12.08 mm, length 50 mm (Metav IndustryLine) Gauge pin M323.C08 is a single inspection pin designed for dimensional inspection and reference checks in metalworking and quality control contexts. Workshop version for robust daily use Nominal diameter 12.08 mm for precise fit control Length 50 mm for handheld and bench inspection Tolerance ±0.002 mm for high repeatability Reliable metrology for pass/fail and fit checks The inspection pin delivers consistent dimensional accuracy with a specified tolerance of ±0.002 mm, making it suitable for tight tolerance checks and plug-gauge comparisons. Its nominal diameter of 12.08 mm is produced to a controlled finish that reduces seating errors and wobble during insertion, which in turn improves repeatability when validating bores or mating parts. This level of precision supports efficient quality decisions and reduces the need for repeated rework or time-consuming measurements. Workshop-grade construction for everyday handling Manufactured in special steel, this inspection pin is engineered for the demands of a shop floor: wear resistance, stable geometry and straightforward handling. The 50 mm length offers a good balance between engagement depth and rigidity, while the workshop version construction resists nicks and deformation during routine use. The comparatively low mass and compact form factor make the pin easy to position in fixtures and jigs, and its finish minimises the risk of surface transfer or contamination during frequent checks. Seamless integration into inspection routines The pin is supplied with clear identification for traceability, enabling straightforward inventory and process control in production and inspection areas. As a single gauge element it pairs readily with comparator setups, ring gauges or simple go/no‑go fixtures, supporting fast decisions on conformity. The compact format also simplifies storage and handling in busy workstations; the component’s technical attributes make it a practical choice when reliable, repeatable gauging is required without complex accessories. For robust, repeatable inspection choose the Metav IndustryLine gauge pin M323.C08 and contact Metav Werkzeuge for tailored application guidance and procurement: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M323.C08 GTIN: 4061905065545 Category: Messstifte Dimensions & tolerances Diameter: 12.08 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Materials & features Material: Special steel Version: Workshop execution Accuracy class: ±0.002 FAQ What is this pin intended for? The gauge pin is intended for dimensional inspection and fit checks in quality control; the M323.C08 from Metav IndustryLine is suitable for verifying bore diameters and mating component fits. How precise is the gauge pin? This inspection pin is manufactured to a tolerance of ±0.002 mm, offering high repeatability for workshop‑level gauging tasks. Which material is used for the pin? The pin is made from special steel, selected for wear resistance and durability in routine inspection environments. Can the pin be used with go/no‑go fixtures? Yes. The nominal Ø12.08 mm diameter and controlled tolerance make the pin compatible with comparator setups and simple go/no‑go gauging arrangements. How is the item identified for inventory and traceability? The product is listed under SKU M323.C08 and GTIN 4061905065545 to support clear identification and traceability in procurement and quality systems. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12.09 mm Gauge Pin, 50 mm Length, Workshop Version, Special Steel, Supplied in Case - Metav IndustryLine
Take advantage of the combination of workshop-grade robustness, ±0.002 mm repeatability and a compact 50 mm length for reliable end-dimension checks; order directly via Metav Werkzeuge or consult our specialists for batch supply and technical advice. Gauge pin M323.C09 — Precision gauge pin, Ø 12.09 mm, 50 mm length (Metav IndustryLine) The Gauge pin M323.C09 is a single precision checking pin for end‑dimension verification and go/no‑go gauging in workshop inspection and production control environments. Workshop-grade precision design Diameter 12.09 mm tolerance ±0.002 50 mm hardened special-steel length Delivered in protective transport case High-accuracy checking for routine inspection The M323.C09 is engineered for consistent measurement accuracy in everyday workshop use. With an indicated accuracy of ±0.002 mm, this checking pin reduces measurement uncertainty during pass/fail checks and fits precision bores for end‑dimension verification. The compact 50 mm shank length and nominal 12.09 mm diameter allow quick insertion into gauges and fixtures, enabling faster throughput on inspection benches without sacrificing repeatability. This technical consistency supports tighter quality control and fewer downstream rejects. Built for the workshop: durability and handling Manufactured from special steel, the pin is finished to withstand regular handling and contact with measurement fixtures. The hardened surface provides resistance to wear, preserving the gauge diameter over many cycles and ensuring long service life in a production environment. Supplied individually and presented in a protective transport case, the component arrives ready for use and for safe storage between measurement tasks, reducing the risk of damage in transit or on the shop floor. Practical traceability and integration The compact design suits integration into existing inspection workflows, from handheld checks to fixture-mounted gauging stations. The single-item supply and clear labelling support traceability in small-batch production and calibration records. Its nominal dimension and tight tolerance make the pin suitable for precise end‑mass checks and use in selective fit testing, helping to maintain consistent assembly quality across repeated cycles. Contact Metav Werkzeuge for availability of the Metav IndustryLine gauge pin M323.C09 and for tailored supply or batch‑calibration guidance; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M323.C09 GTIN: 4061905065552 Manufacturer: Metav IndustryLine Label: Gauge pin, single, Ø 12.09 mm; Length 50 mm Facts Diameter: 12.09 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.1 kg Special features Workshop version Material: special steel Supplied individually Delivered in plastic/wooden transport case Intended for end-dimension checking FAQ What is the specified tolerance for this gauge pin? The M323.C09 gauge pin is specified with an accuracy of ±0.002 mm, suitable for high‑precision workshop checks. Is the pin supplied as a single item or in sets? The product is supplied individually and delivered in a protective transport case for safe handling and storage. Which applications suit this gauge pin? This checking pin is intended for end‑dimension verification, go/no‑go gauging and precise fit checks in production and inspection workflows. What material is the pin made from and how does that affect wear? The pin is made from special steel with a hardened finish, offering good wear resistance for routine use in workshop environments. Where can the product identifiers be found for ordering and traceability? Use the article number M323.C09 and GTIN 4061905065552 when ordering or recording the item for traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12.11mm Gauge Pin Length 50mm Workshop Finish, ±0.002 Accuracy - Metav IndustryLine
Reliable precision with robust workshop geometry: 12.11 mm diameter, 50 mm length and a guaranteed tolerance of ±0.002 mm make this single gauge pin ideal for repeatable end‑measurements. Order the gauge pin directly via Metav Werkzeuge or speak to our consultants for application guidance. Gauge pin M323.C11 – single precision gauge pin, 12.11 mm × 50 mm (Metav IndustryLine) The Gauge pin M323.C11 is a precision‑ground single gauge pin intended for end‑dimension checks and plug gauge assemblies in workshop and quality‑control environments. Diameter 12.11 mm precision ground Length 50 mm workshop version Tolerance ±0.002 mm ensured Special steel construction for durability Accuracy that secures repeatable end‑measurements High‑precision components demand stable reference pins; this gauge pin delivers by combining a 12.11 mm nominal diameter with a verified ±0.002 mm deviation. The tight tolerance is particularly beneficial where a measurable reference is required for go/no‑go checking, calibration jigs or end‑dimension verification of turned parts. The precision grinding process reduces surface irregularities and runout, which means fewer repeat measurements and a clearer pass/fail decision — an operational advantage for shops aiming to reduce inspection time without sacrificing reliability. Robust workshop design for everyday use Designed as a workshop version, the pin is machined from special steel to offer resilience against wear while retaining dimensional stability. The 50 mm length provides sufficient engagement for many plug and end‑measure scenarios while remaining easy to handle and position. At approximately 0.1 kg, the component is light enough for frequent use yet substantial enough to avoid flex under typical manual handling. The material choice and finish support repeated contact with mating parts, contributing to longer service intervals and predictable inspection outcomes. Integration into inspection processes and handling advice As a single measuring element, the pin suits insertion into fixture bores, feeler stacks and comparative checks; it can also be combined with other pins for stepped or nested gauges. Supplied individually, the unit fits compact inspection kits and can be stored alongside other reference standards. Routine practice such as gentle cleaning after use and protected storage will preserve the precision surface. For bespoke assemblies or batch requirements, the SKU M323.C11 and the Metav IndustryLine designation allow straightforward procurement and traceability within existing inspection workflows. For supply enquiries or technical advice on the Metav IndustryLine gauge pin M323.C11, contact Metav Werkzeuge in Emmerich – consultants are available to advise on suitability and dispatch arrangements Technical data Article number: M323.C11 GTIN: 4061905065576 Manufacturer: Metav IndustryLine Key measurements Diameter: 12.11 mm Length: 50 mm Weight: 0.1 kg Tolerance: ±0.002 mm Materials & features Material: Special steel Special feature: Workshop version Delivery form: Single gauge pin FAQ What is the stated tolerance of this gauge pin? The gauge pin M323.C11 is specified with a tolerance of ±0.002 mm, suitable for precise end‑measurement tasks in workshop environments. Which material is used for the pin and what does that mean for wear? The pin is made from special steel; this provides a durable surface that resists wear during repeated contact and maintains dimensional stability under normal workshop use. Can this pin be used in plug gauge arrangements? Yes, the single pin is intended for end‑dimension checks and can be integrated into plug gauge assemblies or fixtures where a 12.11 mm reference is required. Is the product supplied individually or in sets? This article is supplied as a single gauge pin under SKU M323.C11, allowing selective replacement or custom assembly of gauge nests. How should the pin be stored to preserve accuracy? After inspection use, clean the pin and keep it in a dry, protected compartment within the inspection kit to prevent corrosion and surface damage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12.12mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of the combination of high repeatability, workshop‑grade durability and compact dimensions to streamline end‑dimension checks and fixture set‑ups; order the test pin directly via Metav Werkzeuge or consult their specialists for application advice. Test pin M323.C12 — 12.12 mm diameter · 50 mm length (Metav IndustryLine) The test pin M323.C12 is a workshop‑grade measurement pin designed for precise end‑dimension checks, gauge inserts and compact fixture applications in industrial and trade environments. Workshop‑grade construction Nominal diameter 12.12 mm 50 mm length for compact fixtures Tolerance ±0.002 mm high precision Precision that secures repeatable end‑dimension checks The test pin delivers a nominal diameter of 12.12 mm with a declared tolerance of ±0.002 mm, giving reliable repeatability for comparative checks and go/no‑go gauges. This level of accuracy supports consistent measurement outcomes in assembly and inspection routines, reducing the need for repeated adjustments. The narrow tolerance also simplifies statistical process control by lowering measurement scatter in small‑part verifications. Robust build tailored to workshop conditions Constructed from special steel and offered in a workshop‑execution, the pin resists ordinary shop wear while maintaining a true shaft profile for secure seating in fixtures. The compact 50 mm length combines rigidity with accessibility, allowing easy handling when installing into plates, pins or nested gauge blocks. The moderate mass supports stable placement without unnecessary inertia during manual operations. Designed for seamless integration with gauges and fixtures With its compact geometry and standardised dimensions, the pin is suited to retrofitting into existing inspection fixtures and bespoke gauges. The item’s M323.C12 identification and GTIN ensure traceable inventory handling and quick reordering. Where precision dowel alignment or end‑face reference is required, the pin provides a straightforward mechanical datum that reduces setup time and supports reproducible assembly references. For reliable end‑dimension controls and workshop‑ready durability, request the M323.C12 test pin from Metav Werkzeuge for tailored advice and fast procurement assistance. Technical details Article number: M323.C12 GTIN: 4061905065583 Material: Special steel Nominal diameter: 12.12 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special designation: Workshop execution Facts Category: Test pins Accuracy class: ±0.002 mm Intended use: End‑dimension checks, gauge inserts, fixture datum Special features Compact shaft for tight fixtures Robust surface finish suitable for repeated use Traceable identification (SKU and GTIN) Workshop‑grade mechanical stability FAQ What is the nominal diameter of this test pin? The test pin has a nominal diameter of 12.12 mm, providing a standard shaft size for tight‑tolerance datum applications. How precise is the pin for inspection use? The pin is specified with a tolerance of ±0.002 mm, which makes it suitable for high‑repeatability checks and fine gauge work in workshop environments. What material is used and is the design for workshop use? The component is manufactured from special steel and delivered in a workshop‑grade execution, optimised for routine handling and repeated insertion into fixtures. Which applications suit this test pin best? Typical uses include end‑dimension verification, insertion into go/no‑go and custom gauges, fixture datum points and alignment tasks where a compact, high‑precision pin is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12.13mm Test Pin Length 50mm Workshop Version, Special Steel Case Included - Metav IndustryLine
Take advantage of the combination of high repeatability, workshop‑ready robustness and tight manufacturing tolerance for reliable end‑measure checks and fixture alignment; order directly via Metav Werkzeuge or ask the consultants for application advice. Gauge pin, single, 12.13 mm, 50 mm length — Metav IndustryLine workshop version Gauge pin, single, 12.13 mm is a precision inspection pin designed for end‑measure verification and fixture positioning in metalworking and quality‑control environments. Diameter 12.13 mm precision fit Length 50 mm workshop grade Tolerance ±0.002 mm accuracy Made from special steel for durability Consistent positioning for faster set‑ups A precisely matched cylindrical pin ensures repeatable locating and reduces alignment time. The 12.13 mm nominal diameter and a verified ±0.002 mm tolerance give a predictable interference or slip fit depending on the application, which translates to fewer trial adjustments during fixturing. In practical terms, two or three accurate locating points created with such a pin can shorten set‑up sequences and increase first‑pass yield; the result is a measurable improvement in throughput without requiring additional process steps. Robust construction for shopfloor demands The 50 mm length and special steel construction make this item suitable for daily workshop use where knocks and frequent handling occur. The workshop grade finish balances surface integrity with cost‑effective manufacturability, so the pin resists premature wear while remaining straightforward to replace when necessary. For users who require a compact, single‑piece solution for gauging or assembly jigs, this design delivers a durable locating element that keeps maintenance and inventory uncomplicated. Clear application scope and measurement benefits Use this inspection pin for end‑measure checks, fixture alignment, and transfer of reference dimensions in production and inspection routines. As a single, traceable component it integrates well into localisation tasks and manual quality checks, where geometric certainty of a reference point is required. Where tighter process control is sought, the tight ±0.002 mm specification supports statistical process control by reducing one source of measurement variation, helping to stabilise downstream machining and assembly operations. For workshop‑ready precision from Metav IndustryLine, contact Metav Werkzeuge in Emmerich for tailored advice and procurement support via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M323.C13 SKU: M323.C13 GTIN: 4061905066191 Brand: Metav IndustryLine Facts Nominal diameter: 12.13 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Accuracy class: ±0.002 Special features Workshop version Material: special steel Single piece delivery Suitable for end‑measure and fixture alignment FAQ What nominal size does the pin provide? The pin is manufactured to a nominal 12.13 mm diameter and is suitable where that specific gauge is required for locating or measurement. How precise is the component for gauging tasks? The Metav IndustryLine gauge pin is produced to a ±0.002 mm tolerance, making it appropriate for precision inspection and reliable fixture positioning. Which applications are typical for this inspection pin? Typical uses include end‑measure checks, fixture alignment, transfer of reference points in machining centres and manual inspection benches. Is the item supplied as a single piece or in sets? This article is supplied as a single gauge pin and is identified by SKU M323.C13 for ordering and inventory tracking. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12.14mm Gauge Pin Single 50mm Length Workshop Version - Metav IndustryLine
Take advantage of precise end‑dimension control with a robust gauge pin made from special steel, featuring an exact diameter of 12.14 mm and a length of 50 mm plus a tight tolerance of ±0.002 mm for repeatable inspection results; order directly via Metav Werkzeuge for reliable workshop supply and expert advice. Gauge pin, single, 12.14 mm — inspection pin, 50 mm length (Metav IndustryLine) A gauge pin, single, 12.14 mm designed for end‑dimension checks, alignment and reference measurements in workshop metrology. Workshop version, robust design Diameter precisely 12.14 mm Tolerance ±0.002 mm Delivered in protective box Accurate reference for end‑dimension checks As a compact inspection element, the gauge pin provides an uncompromising reference for short‑run checks and fixture alignment. The defined diameter of 12.14 mm and the declared tolerance of ±0.002 mm mean that the component is suitable where reproducible go/no‑go conditions or reference fits are required. The workshop‑grade construction keeps handling straightforward while the 50 mm length offers adequate engagement for many common bores and locating tasks, reducing set‑up time on the shop floor. Durable material and reliable handling Manufactured from special steel, the pin resists wear under normal inspection cycles and maintains dimensional stability during repeated use. The workshop version includes a protective case for transport and storage, which helps preserve the measuring surface and prolongs service life. Delivered clean and ready for use, this inspection pin simplifies routine quality checks and promotes repeatable measurement outcomes with minimal preparation. Practical fitment and process benefits Incorporating a hard, accurately turned reference pin into inspection sequences reduces measurement variation and shortens inspection loops. The compact geometry and robust finish make the item suitable for integration with gauges, fixtures and manual verification procedures commonly found in maintenance, toolrooms and small‑batch production. Backed by Metav’s focus on dependable supply, the component supports consistent process control without overcomplication. Contact Metav Werkzeuge today to secure workshop‑ready inspection pins and discuss fitment options—Metav Werkzeuge can advise on stock, delivery and compatible gauge systems at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M323.C14 GTIN: 4061905066207 Label: Gauge pin, single, 12.14 mm length 50 mm Facts Diameter: 12.14 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.1 kg Special features Workshop version Material: special steel Supplied in protective box Category: Gauge pins (Messstifte) FAQ What are the exact dimensions of the pin? The gauge pin has a nominal diameter of 12.14 mm and a length of 50 mm; it is listed as M323.C14 from Metav IndustryLine. What tolerance and repeatability can be expected? The pin is specified with a tolerance of ±0.002 mm, providing tight repeatability suitable for workshop inspection and reference uses. Is the pin delivered protected for storage and transport? Yes, the item is supplied in a protective box to preserve the measuring surface during transport and storage. Which material is used for the inspection pin? The pin is made from special steel, chosen for dimensional stability and wear resistance in routine inspection tasks. What are the typical applications for this gauge pin? Typical uses include end‑dimension checks, locating and alignment in fixtures, reference checks in maintenance and small‑batch production. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12.15mm Gauge Pin Single 50mm Length Workshop Version - Metav IndustryLine
Take advantage of the combination of industrial-grade special steel, tight ±0.002 mm tolerance and compact dimensions to secure repeatable end‑dimension checks and reliable fixture alignment on small components. Order the gauge pin directly via Metav Werkzeuge or consult the team for application advice. Metav IndustryLine Gauge Pin M323.C15 — 12.15 mm diameter, 50 mm length The Metav IndustryLine Gauge Pin M323.C15 is a single precision test pin designed for end‑dimension verification and alignment tasks in small‑component metrology. High-precision tolerance ±0.002 mm Special-steel, hardened construction 12.15 mm nominal diameter, 50 mm length Consistent, measurable precision for inspection workflows The compact test pin delivers a repeatable reference for go/no‑go checks and fixture set‑up, offering an industrial grade tolerance of ±0.002 mm. Such tight dimensional control reduces inspection scatter and shortens cycle time when measuring small bores or alignment features. The measured accuracy is stated as a clear numerical value, enabling straightforward integration into quality plans and statistical process control routines where traceable, reproducible measurements are required. Durable material and dimensional stability for workshop use Constructed from special steel, the pin provides a good balance of wear resistance and dimensional stability under normal workshop conditions. The 50 mm shank length and 12.15 mm nominal diameter suit a wide range of locating and checking tasks on small assemblies and precision parts. Robust material selection minimises fretting and profile change during repeated seating, which preserves tolerances over many cycles and supports longer service intervals before replacement is necessary. Practical application and system compatibility The single pin format is suitable for integration into inspection benches, gauge blocks, fixture tooling and manual plug checks. Its compact size makes it well adapted to precise end‑dimension checks and alignment in confined spaces typical of toolrooms and small‑batch production. Supplied as an individual reference pin, the component complements a set of standard gauges and assists in rapid verification without the need for complex fixtures, supporting efficient shop‑floor workflows and reliable pass/fail decisions. For assured measurement repeatability with the Metav IndustryLine gauge pin M323.C15 (±0.002 mm), contact Metav Werkzeuge in Emmerich for procurement and technical guidance. Technical data SKU: M323.C15 GTIN: 4061905066634 Item: Test pin, single, 12.15 mm nominal diameter, 50 mm length Manufacturer: Metav IndustryLine Facts Nominal diameter: 12.15 mm Length: 50 mm Dimensional tolerance: ±0.002 mm Weight: 0.1 kg eClass: 21170231 Special features Workshop version Material: special steel Single precision gauge pin for end‑dimension checks FAQ What level of accuracy does this gauge pin offer? The gauge pin provides a dimensional tolerance of ±0.002 mm, specified for the Metav IndustryLine M323.C15 test pin. Which material is the pin made from and how does that affect wear? The pin is made from special steel; this construction balances hardness and stability to reduce wear and maintain dimensional integrity during repeated use. For which applications is the pin intended? The pin is intended for end‑dimension verification, fixture alignment and plug checks on small components; the Metav IndustryLine gauge pin M323.C15 is suited to inspection benches and manual verification tasks. Is this pin suitable for integration into fixture tooling? Yes, the single format and compact dimensions of the M323.C15 make it compatible with fixture tooling and gauge setups where a precise reference bore or shaft is required. What is the nominal size and length of the pin? The nominal diameter is 12.15 mm and the overall length is 50 mm for the Metav IndustryLine M323.C15. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12.16mm Test Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of a compact workshop gauge that combines repeatable dimensional control and robust material construction for dependable end‑dimension checks. The combination of 12.16 mm nominal diameter, 50 mm overall length and an accuracy of ±0.002 mm supports consistent in‑process verification; order directly via Metav Werkzeuge or consult our specialists for application advice. Inspection pin, single — 12.16 mm diameter, 50 mm length (Metav IndustryLine) A single inspection pin designed for end‑dimension verification and simple gauge applications in workshop metrology, offering precise contact and repeatable measurements. High precision ±0.002 mm tolerance Diameter 12.16 mm for end‑dimension checks 50 mm overall length, workshop specification Precise dimensional control for routine checks The inspection pin functions as a compact, high‑accuracy reference for end‑dimension measurements in production and assembly tasks. With a declared tolerance of ±0.002 mm, the pin is suitable for fine verification where small deviations matter; this precision reduces uncertainty during repetitive checks and supports quality control processes. The specification reflects industrial metrology practice and enables confident comparison against drawing tolerances or gauge limits. Robust construction for everyday workshop use Constructed from special steel, the gauge pin resists wear while maintaining contact integrity over repeated cycles, which preserves measurement reliability in busy workshop environments. The 50 mm overall length and 12.16 mm diameter provide a balance between handling convenience and sufficient engagement for end‑face inspection. The workshop designation indicates suitability for regular use without the need for bespoke mounting or fixtures. Integration into shop workflows and traceability As a single reference element, the pin simplifies quick go/no‑go checks and can be incorporated into existing fixture setups or bench gauges with minimal modification. Marking and the supplied article identifiers help maintain traceability in stock and inspection logs; the compact form factor also eases storage and rapid selection at the point of use. Where repeatability is essential, the gauge pin offers a straightforward, low‑complexity solution that supports consistent production quality. For reliable dimensional verification, request the Metav IndustryLine inspection pin from Metav Werkzeuge by phone or email for tailored technical advice and prompt supply Technical data Article number: M323.C16 GTIN: 4061905066641 Manufacturer: Metav IndustryLine Facts Nominal diameter: 12.16 mm Overall length: 50 mm Accuracy: ±0.002 mm Weight: 0.1 kg Material: Special steel Special features Workshop version Single inspection pin for end‑face checks Category: Gauge pin / Inspection pin ECLASS: 21170231 FAQ What is the intended use of this inspection pin? The inspection pin is intended for end‑dimension checks and simple gauge applications where a compact reference element with ±0.002 mm accuracy is required. Which materials is the pin manufactured from? The pin is made from special steel, selected to provide longevity and wear resistance in routine workshop use. Can the inspection pin be mounted in fixtures or bench gauges? Yes, the pin’s 12.16 mm diameter and 50 mm length suit integration into existing fixtures and bench‑style checking arrangements. How repeatable are measurements taken with this pin? Repeatability is supported by the declared tolerance of ±0.002 mm, which is suitable for precise routine verifications and narrow tolerance assessments. What identifiers accompany the product for traceability? The article is supplied with the SKU M323.C16 and GTIN 4061905066641 to assist stock control and inspection documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12.17mm Gauge Pin Length 50mm Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of high dimensional accuracy ±0.002 mm, robust special steel construction and a compact 50 mm length for reliable end‑measure checks and fixture verification. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin M323.C17 — precision ground plug gauge Ø 12.17 mm, 50 mm length (Metav IndustryLine) The gauge pin M323.C17 is a precision ground plug gauge intended for end‑measurement, go/no‑go checks and alignment tasks in inspection and assembly environments. Precision tolerance ±0.002 mm Diameter Ø 12.17 mm 50 mm overall length Workshop‑grade special steel Reliable fit control for inspection and assembly A precision ground gauge pin such as this provides a consistent, verifiable datum for small‑bore checks and fixture set‑ups. The tight tolerance of ±0.002 mm reduces uncertainty when validating bores, locating holes or verifying mating parts, which in turn speeds up quality inspections and prevents costly rework. The compact form and 50 mm overall length make the pin easy to handle while still providing enough engagement for secure measurement contact; the result is repeatable verification without elaborate fixturing. Built for durability and repeatable results Constructed from special steel, the pin is hardened and finished to resist wear under repetitive use in workshop conditions. The hard, ground surface maintains diameter stability and surface quality so that measurement drift is minimised across many cycles. This durability supports predictable inspection intervals and contributes to a smoother production flow, since less frequent replacement or reshaping of gauges is required. Practical precision for everyday metrology tasks Engineered as a single‑piece plug gauge, the component is suited to end‑measure tests, alignment of assemblies and go/no‑go checks in quality control. The Ø 12.17 mm nominal diameter is manufactured to close tolerance and labelled accordingly for straightforward traceability. For shops standardising inspection procedures, this plug gauge serves as a compact, low‑complexity reference that complements calipers and micrometres and integrates easily into routine measuring stations. For precise fit validation and robust routine use, contact Metav Werkzeuge to request this Metav IndustryLine gauge pin or to discuss application suitability at your facility. Technical Data Article number: M323.C17 GTIN: 4061905066658 Manufacturer brand: Metav IndustryLine Category: Gauge pin / Plug gauge Facts Nominal diameter: 12.17 mm Length: 50 mm Mass: 0.1 kg Tolerance / accuracy: ±0.002 mm ECLASS: 21170231 Special features Material: special steel Single gauge, precision ground Workshop execution (robust design) Intended applications: end‑measure checks, alignment, go/no‑go testing FAQ What is the intended use of this gauge pin? The gauge pin M323.C17 from Metav IndustryLine is intended for end‑measurement checks, bore verification and fixture alignment in inspection and assembly tasks. How tight is the tolerance and what does it mean for inspection? The pin is manufactured to an accuracy of ±0.002 mm, which provides fine control for fit checks and reduces measurement uncertainty in routine quality inspections. Which material is the plug gauge made from and why does that matter? The M323.C17 is made from special steel, chosen for wear resistance and dimensional stability so the gauge maintains its diameter and surface quality over many cycles. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12.18mm Test Pin Length 50mm Workshop Version - Metav IndustryLine
With a ±0.002 mm tolerance, Ø 12.18 mm diameter and 50 mm length, this single gauge pin provides workshop‑grade repeatability for end‑measure checks and fit verification; order the gauge pin directly via Metav Werkzeuge or consult our specialists for matching inspection sets. Gauge pin M323.C18 — single test pin, Ø 12.18 mm, length 50 mm (Metav IndustryLine) The gauge pin M323.C18 is a compact, precision test pin designed for end‑measure and fit inspection in workshop and inspection environments. Precision tolerance ±0.002 mm Ø 12.18 mm — length 50 mm Workshop‑grade special steel construction Consistent precision for repeatable end‑measure checks The compact test pin delivers repeatable measurements thanks to its tight tolerance of ±0.002 mm, which places it in the high‑precision class for workshop gauges. Manufactured from special steel, the probe body retains form under handling and routine use, reducing measurement variation caused by wear. For practical inspection tasks such as checking hole diameters, plug fits or end‑masses, the hardened geometry and defined cylindrical form ensure that roundness and diameter remain reliable across multiple checks, supporting quality control workflows where reproducibility is essential. Designed for workshop handling and fast inspection routines As a workshop‑grade single pin with a 50 mm length and an intermediate diameter, this test pin balances reach with rigidity. The medium‑short shank keeps the probe stable during insertion and extraction, making it suitable for rapid sampling and repetitive checks on assemblies and components. The pin’s size and weight also simplify manual handling and storage in tool trays; when combined with a controlled inspection routine, the result is shorter cycle times and fewer measurement errors, which improves overall process efficiency on the shop floor. Fits micro‑range metrology and compatibility with inspection systems Classified within the micro measurement range (10–100 mm), this gauge pin is intended for fine mechanical work where compactness and accuracy are priorities. The single‑piece design serves as a reliable reference for go/no‑go tests, alignment checks and end‑measure verification. Where traceable comparison to master gauges is required, the pin can be integrated into inspection jigs or used alongside micrometres and bore gauges to cross‑check results. Its straightforward geometry also makes it a practical choice for custom fixtures and batch inspection setups. Contact Metav Werkzeuge for Metav IndustryLine gauge pins or request expert advice at info@metav-werkzeuge.com to configure inspection sets tailored to specific tolerance needs Technical data SKU: M323.C18 GTIN: 4061905066665 Diameter: 12.18 mm Length: 50 mm Material: Special steel Tolerance: ±0.002 mm Weight: 0.1 kg Facts Category: Gauge pins (Messstifte) eClass: 21170231 Label: Prüfstift, einzeln, 12,18 mm Länge 50 mm Special features Workshop version Single pin delivery Micro measurement range (10–100 mm) FAQ How precise is this gauge pin for routine inspection tasks? The gauge pin M323.C18 from Metav IndustryLine offers a precision of ±0.002 mm, making it suitable for high‑accuracy workshop checks and repeatable go/no‑go verifications. Is this pin suitable for measuring small bores and tight fits? Yes, the Ø 12.18 mm diameter and micro‑range classification make the pin appropriate for small bores, shaft fits and precision plug checks in fine mechanical and production environments. What material is the pin made from and how does that affect durability? Constructed from special steel, the pin provides enhanced wear resistance and dimensional stability, supporting long service life under normal workshop use. Can the single pin be used alongside other inspection tools in a quality workflow? The M323.C18 functions well as a reference element within jigs or as part of a cross‑check routine with micrometres and bore gauges; consult for set composition if multiple sizes are needed. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12.19mm Test Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Benefit from the combination of tight tolerance, robust special‑steel construction and compact dimensions for reliable end‑dimension checks; order the gauge pin directly via Metav Werkzeuge or consult our advisors for specification support. Gauge pin M323.C19 — single inspection gauge pin, Ø 12.19 mm, length 50 mm (Metav IndustryLine) A M323.C19 single gauge pin engineered for precise end‑dimension verification and workshop inspection tasks. Workshop‑grade special steel construction Diameter 12.19 mm with ±0.002 mm tolerance Compact 50 mm length for confined checks Supplied in transport case for damage protection Precision where end‑dimensions matter The gauge pin delivers measurable confidence in rapid inspection routines. With a nominal diameter of 12.19 mm and a verified tolerance of ±0.002 mm, this inspection pin supports reproducible go/no‑go and feeler checks that cut rework and machine downtime. The controlled tolerance assists traceable quality assurance steps and makes the pin suitable as a reference for end‑dimension verification in incoming inspection and in‑process sampling. Robust workshop design for everyday inspection Manufactured in a workshop‑grade special steel, the inspection pin balances hardness and toughness for repeated seating and extraction. The 50 mm overall length and low mass (approx. 0.1 kg) make the pin easy to handle in confined jigs and assembly fixtures, while the supplied transport case reduces the risk of nicks that would affect measurement reliability. This practical design supports fast throughput in busy inspection benches without compromising tool life. Practical benefits and application scope Designed primarily for end‑dimension checks, the pin is ideal for quick verification of bore sizes, alignment checks and as a reference in fixture set‑up. The compact form factor suits workshop workflows where space and speed are priorities, and the tight tolerance enhances decision‑making in first‑article inspections. Traceable identification (GTIN and SKU available) simplifies inventory and document control, helping to integrate the pin into established quality processes. Contact Metav Werkzeuge to secure the Metav IndustryLine gauge pin Ø 12.19 mm (M323.C19) and to discuss its suitability for specific inspection or fixture applications Technical data SKU: M323.C19 GTIN: 4061905066672 Description: Single gauge pin, Ø 12.19 mm, length 50 mm Brand: Metav IndustryLine Facts Diameter: 12.19 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Workshop version (Werkstatt‑Ausführung) Supplied in transport case for protection Application: end‑dimension verification FAQ What tolerance can be expected from this gauge pin? The gauge pin is manufactured to a tolerance of ±0.002 mm, providing the repeatability required for reliable go/no‑go and dimensional spot checks with the M323.C19 inspection pin. Which material is used for the pin? The pin is made from special steel in a workshop‑grade finish, chosen to resist wear while maintaining dimensional stability during routine use. Is the pin suitable for use in confined fixtures or jigs? Yes. The 50 mm length and compact diameter make it well suited for confined spaces, alignment checks and fixture set‑up in machine and assembly environments. How is the pin delivered and protected in transit? The pin is supplied in a transport case to protect the measuring surface from damage during storage and transport, preserving measurement integrity. For which inspection tasks is the pin most appropriate? Typical uses include bore verification, end‑dimension checks, alignment and fixture referencing where a precise, single‑diameter reference is required Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12.1mm Gauge Pin Length 50mm Workshop Version, Special Steel - Metav IndustryLine
Compact gauge pin with workshop-grade durability: 12.1 mm nominal diameter and 50 mm length, offering repeatable checks with a tight tolerance of ±0.002 mm. Benefit from a small, robust inspection pin that speeds up end‑measure and go/no‑go routines; order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin, single — 12.1 mm Ø × 50 mm (Metav IndustryLine) Gauge pin, single, 12.1 mm Ø and 50 mm length, designed for precise end‑measure and go/no‑go inspections in workshop and production settings High precision ±0.002 mm 12.1 mm nominal diameter 50 mm length for deeper checks Special steel construction Reliable accuracy for routine quality control The gauge pin delivers measurable benefits where reproducibility matters: a geometric reference with ±0.002 mm tolerance that reduces variability in pass/fail decisions and shortens inspection cycles. As a hardened inspection element with a defined nominal diameter of 12.1 mm, it is ideal for repeat checking of bore diameters, plug fits and end‑measure comparisons. The tight tolerance supports consistent results across multiple operators and fixtures, converting measurement certainty directly into lower rework rates and faster throughput. Robust, workshop‑grade design for everyday handling Constructed from special steel and finished for durable contact performance, this inspection pin is engineered for repeated use in workshop environments. The 50 mm active length gives enough reach for deeper sockets or assembly checks while remaining easy to handle; the listed mass of 0.1 kg balances stability and manoeuvrability. The M323.C10 designation aids traceability in stock and tooling lists, ensuring the part is quickly identified during process planning or exchange with metrology equipment. Practical integration into inspection workflows Use the pin as a reference probe for manual gauges, simple go/no‑go fixtures or as a tactile check during assembly inspection. Its straightforward geometry makes it compatible with common holding fixtures and gauge plates, supporting fast set‑up and minimal operator training. Clear identification via SKU and GTIN simplifies procurement and inventory management, and the workshop‑oriented specification makes it a dependable choice for maintenance, production sampling and calibration checks. For workshop‑grade precision and smooth procurement, contact Metav Werkzeuge to request availability or ask technical advisers about integration with existing gauges; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M323.C10 GTIN: 4061905065569 Category: Gauge pins Facts Diameter: 12.1 mm Length: 50 mm Accuracy/tolerance: ±0.002 mm Weight: 0.1 kg eClass: 21170231 Special features Material: special steel Workshop‑grade execution Single item delivery SKU: M323.C10 FAQ What tolerance can be expected from this inspection pin? The gauge pin is specified with a tolerance of ±0.002 mm, making it suitable for precise go/no‑go and end‑measure checks in workshop environments. Which material is used for the pin and why does it matter? Made from special steel, the pin offers wear resistance and stable contact properties, which preserves diameter integrity during repeated use. Is the pin suitable for deeper bore checks? Yes; the 50 mm length provides additional reach for deeper sockets and assemblies while remaining easy to handle for manual inspections. How is the item supplied — single or as a set? This is a single gauge pin supplied individually under SKU M323.C10. How can the pin be ordered or referenced in procurement? Refer to SKU M323.C10 or GTIN 4061905065569 when ordering to ensure the correct 12.1 mm × 50 mm gauge pin is supplied. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com