Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
12.2 mm Gauge Pin, Single, 50 mm Length, Workshop Version - Metav IndustryLine
Take advantage of a compact, workshop-grade gauge pin that pairs a 12.20 mm reference diameter with a 50 mm working length and a tight ±0.002 mm tolerance for reproducible setup and go/no-go checks — order directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.C20 – 12.20 mm diameter, 50 mm length (Metav IndustryLine) A gauge pin M323.C20 designed for precise bore checking, fixture setting and end‑measurement tasks in a workshop environment Workshop version for robust daily use Diameter 12.20 mm for tight fit checks Length 50 mm for standard gauge setups Tolerance ±0.002 mm for high repeatability Reduce setup time with measurable repeatability The compact cylindrical design ensures a constant reference when aligning fixtures or checking bore sizes. With a 12.20 mm reference diameter and a stated ±0.002 mm variation, the pin delivers measurable repeatability that shortens setup and inspection cycles. The close tolerance reduces back‑and‑forth adjustments during assembly, translating into fewer stoppages on production lines and a clearer pass/fail decision in quality routines. Built to withstand workshop handling Manufactured from Special steel, the pin is configured for hands‑on use where robustness matters. The 50 mm working length is long enough for reliable engagement in common jigs while remaining easy to handle and store. The workshop version construction balances surface hardness and resistance to everyday knocks so that reference geometry remains stable over repeated use, lowering the need for premature replacements. Integrates into inspection and tooling workflows As a standard gauge‑style reference, this test pin fits into measuring benches, plug checkers and fixture arrays without requiring special adapters. The straightforward geometry simplifies documentation and traceability in inspection protocols and helps maintain consistent results across shifts. Combining durable materials with tight tolerance makes the pin suitable for routine quality control, sample testing and comparative checks in component production. For reliable, repeatable gauging in workshop environments contact Metav Werkzeuge for tailored supply and expert guidance from Emmerich Technical data Article number: M323.C20 GTIN: 4061905067495 Manufacturer: Metav IndustryLine Core measurements Diameter: 12.20 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Material & features Material: Special steel Workshop execution Category: Gauge pin / Messstifte FAQ What applications suit this gauge pin? The gauge pin M323.C20 is suitable for bore checking, fixture setting and end‑measurement tasks in workshop and production inspection environments. How precise is the reference diameter? The pin provides a reference diameter of 12.20 mm with a tolerance of ±0.002 mm, enabling tight fit checks and repeatable measurements. Is the pin suitable for everyday workshop use? Yes, the workshop execution and special steel construction make the pin durable enough for routine handling and integration into standard gauging setups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12.21mm Gauge Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of extreme dimensional precision, robust special‑steel construction, and compact 50 mm length for reliable end‑measurement tasks in everyday workshop environments; order the component directly via Metav Werkzeuge or consult our specialists for application advice. Metav IndustryLine Gauge Pin M323.C21 – 12.21 mm Ø, 50 mm length The gauge pin, single, 12.21 mm, length 50 mm is a hardened inspection pin designed for precise end‑measure checks, fixture alignment and reference gauging in metalworking and inspection stations. Workshop design for daily use Special steel construction Diameter 12.21 mm for end‑measure checks High repeatability ±0.002 mm Reduce rejects with measurable accuracy The compact inspection pin delivers a guaranteed accuracy of ±0.002 mm, making it suitable where consistent repeatability is essential for quality control. Manufactured from special steel, the pin resists wear and maintains its profile under frequent engagement, which reduces the need for repeated adjustments or replacements. For production lines that rely on small tolerances, this level of precision shortens inspection cycles and lowers rework rates, representing a clear efficiency gain for machining and assembly operations. Built for workshop routines and robust handling With a length of 50 mm and a precise diameter of 12.21 mm, this single gauge pin is optimised for routine use in jigs, fixtures and end‑of‑line inspection fixtures. The workshop execution means the geometry and surface finish are selected to withstand daily handling while preserving measurement integrity. As a straightforward hardened pin, it integrates with standard holders and clamping systems, so retrofitting into existing setups is uncomplicated and fast, supporting uninterrupted production workflows. Traceability, identification and practical benefits The item is supplied with clear identification (SKU M323.C21, GTIN 4061905067501) to simplify inventory and traceability. The modest weight of 0.1 kg and compact envelope allow storage close to the workstation and make handling effortless during rapid test cycles. Where process documentation is required, the stable material properties of special steel ensure that dimensional drift is minimised, supporting stable measurement data over time and improving confidence in inspection results. Contact Metav Werkzeuge for tailored advice on integrating the Metav IndustryLine gauge pin into inspection fixtures or for ordering information via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.C21 GTIN: 4061905067501 Brand: Metav IndustryLine SKU: M323.C21 Facts Diameter: 12.21 mm Length: 50 mm Weight: 0.1 kg Accuracy: ±0.002 mm Special features Workshop execution Material: Special steel Single inspection pin Story trigger: endmasse FAQ Is this pin suitable for fixture alignment? Yes. The Metav IndustryLine gauge pin (M323.C21) is intended for fixture alignment and end‑measurement tasks where a 12.21 mm reference is required. What accuracy can be expected in routine use? Typical repeatability is reflected by the stated ±0.002 mm accuracy for the M323.C21 gauge pin when used in stable fixtures and handled according to good measurement practice. Which material is the pin made from and why does it matter? The pin is made from special steel, chosen for wear resistance and dimensional stability, which helps maintain measurement integrity over frequent use. Can the pin be used as a go/no‑go reference? Yes. As a precisely manufactured single gauge pin, it serves as a reliable reference for go/no‑go checks when combined with appropriate holders or limit gauges. How is the product identified for stock and traceability? The item is listed under SKU M323.C21 and GTIN 4061905067501, facilitating inventory control and traceability Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12.22mm Gauge Pin Length 50mm Workshop Finish, Special Steel - Metav IndustryLine
Take advantage of workshop-grade robustness, special steel construction and a tolerance of ±0.002 mm for reliable small-part inspection; order the gauge pin directly via Metav Werkzeuge or consult our specialists if clarification is required. Metav IndustryLine gauge pin, single — 12.22 mm Ø, 50 mm length Gauge pin, single, 12.22 mm Ø, 50 mm length for precision end‑form checks and fixture set‑up in workshop metrology and quality control. Workshop-grade execution Diameter 12.22 mm, length 50 mm Special steel construction Tolerance ±0.002 mm Precision for small-part inspection Engineered for micro‑range measurement tasks, this gauge pin delivers a tolerance of ±0.002 mm, which places it in the realm of high‑precision workshop gauges. The nominal 12.22 mm diameter and 50 mm usable length allow stable engagement in bore and alignment checks while keeping thermal and handling influences low. For metrology routines that require repeatable end‑form verification, the tight tolerance reduces rework and shortens inspection cycles by providing a clear, objective reference dimension. Durable workshop design that endures daily use The special steel construction and workshop specification ensure mechanical resilience under routine handling and fixture contact. With a compact mass of 0.10 kg, the pin is easy to position while still offering sufficient mass to sit securely in place during manual or semi‑automatic checks. The robust finish resists galling and maintains the gauge surface geometry for long service intervals, supporting consistent measurement results and a lower total cost of ownership in production environments. Simple integration into inspection and setup processes Designed as an individual test element, the pin is ideal for plug‑gauge checks, go/no‑go fixtures and end‑dimension confirmations during set‑up or final inspection. Clear identification by SKU and GTIN facilitates traceability in inventory and quality records; this supports audit trails and process control in regulated production. The compact form factor and standard cylindrical geometry make the component straightforward to incorporate into existing gauge sets or bespoke jigs, improving throughput without extensive adaptation. For precise micro inspection tasks, contact Metav Werkzeuge to discuss the Metav IndustryLine gauge pin (SKU M323.C22) and arrange rapid supply from Emmerich; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M323.C22 GTIN: 4061905067518 Label: Gauge pin, single, 12.22 mm Ø, 50 mm length Facts Diameter: 12.22 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.10 kg Special features Material: Special steel Execution: Workshop version Application hint: End‑form inspection / fixture set‑up Story trigger: end masses FAQ What tolerance can be expected from this gauge pin? The gauge pin is specified with a tolerance of ±0.002 mm, providing high repeatability for micro‑range inspection tasks. Is this pin suitable for integration into fixture jigs? Yes. The single‑piece design and standard cylindrical geometry make the pin suitable for incorporation into go/no‑go fixtures and alignment jigs; the SKU M323.C22 identifies the exact item. Which materials is the pin made from? The pin is manufactured from special steel, chosen for wear resistance and dimensional stability under typical workshop conditions. How is the item identified for inventory and traceability? Identification is possible via SKU M323.C22 and GTIN 4061905067518, which support ordering and quality‑record linkage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12.23mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of a combination of high precision, compact dimensions and robust workshop construction for consistent checking and alignment tasks; order the component directly via Metav Werkzeuge or request technical advice from our consultants. Gauge pin, single – Ø 12.23 mm, length 50 mm (Metav IndustryLine) A gauge pin for precise end‑measurement and fixture alignment in workshop and inspection environments, supplied as a single, workshop‑grade measuring pin Workshop-grade construction Diameter 12.23 mm, length 50 mm Tolerance ±0.002 mm for high precision Made from special steel for durability Precision engineering that reduces rework The pin is manufactured to a tight production tolerance of ±0.002 mm, which translates into reliable repeatability during routine checks and setup operations. Such precision ensures that positional checks, bore gauging and plug‑fit tests produce verifiable results rather than sporadic readings; the numerical tolerance gives a clear basis for acceptance criteria in quality control and reduces the need for corrective rework. The compact form factor keeps handling straightforward in busy workshop flows while maintaining measurement integrity. Robust material and workshop design for long service life Constructed from special steel and specified as a workshop‑grade item, the measuring pin resists wear and retains its nominal diameter over many insertion cycles. The 12.23 mm diameter together with a 50 mm overall length provides a balance between reach and rigidity, suitable for checking bores, alignment pins and reference points in jigs and fixtures. The material choice and finishing minimise surface damage and preserve concentricity, which supports repeatable fits and consistent part assembly. Practical traceability and simple integration into inspection routines Marked and stocked under SKU M323.C23, the component is ready for immediate incorporation into existing inspection sets or as a single‑item spare for fixture maintenance. The modest mass (0.1 kg) and single‑piece supply make logistical handling straightforward while the clear specification supports procedure documentation. Use in end‑measurement, go/no‑go checks or fixture referencing benefits from the pin's defined diameter and documented tolerance, enabling efficient decisions on assembly acceptance and process capability. Contact Metav Werkzeuge for procurement and expert guidance on how this workshop‑grade Metav IndustryLine gauge pin can be integrated into existing measurement routines Technical Data Article number: M323.C23 GTIN: 4061905067525 Brand: Metav IndustryLine Category: Gauge pins / Messstifte Facts Diameter: 12.23 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Workshop execution Material: Special steel Single pin supply SKU: M323.C23 FAQ What is the nominal diameter and length of this pin? The pin has a nominal diameter of 12.23 mm and an overall length of 50 mm. What tolerance can be expected from this Metav IndustryLine gauge pin? The component is produced to a tolerance of ±0.002 mm, suitable for precise checking and alignment tasks. For which applications is this measuring pin suitable? Typical uses include bore gauging, fixture alignment, end‑measurement and plug‑fit checks in workshop and inspection environments. Is the pin supplied as a single item or in sets? This product is supplied as a single gauge pin under SKU M323.C23. Can the pin be used for hardened or abrasive environments? The pin is made from special steel and designed for workshop use; for specific abrasive or extreme‑hardness applications, select materials and coatings should be considered. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12.24mm Gauge Pin Single 50mm Length Workshop Finish - Metav IndustryLine
Take advantage of the combination of robust workshop construction, precise 12.24 mm nominal diameter and a tight tolerance of ±0.002 mm for reproducible end‑measure checks; order this gauge pin directly via Metav Werkzeuge or ask the consultants for application guidance. Gauge pin, single — 12.24 mm diameter, 50 mm length (Metav IndustryLine) Gauge pin, single 12.24 mm — 50 mm length, engineered for precise end‑measure inspection and workshop applications Workshop-grade construction Nominal diameter 12.24 mm 50 mm overall length Tolerance ±0.002 mm Compact accuracy for fine inspection work A compact gauge pin with a nominal diameter of 12.24 mm delivers reliable repeatability for end‑measure checks and reference tests. The short, rigid geometry minimises elastic deformation during probing, which helps preserve measurement consistency in tight assemblies. Specified with a tolerance of ±0.002 mm, this pin supports fine evaluation tasks where small deviations matter; the result is reduced rework and more predictable quality control in routine inspection flows. Built for the workshop: durable material and handling benefits The workshop configuration combines a 50 mm length with special steel construction to withstand daily use on the shop floor. The chosen material provides wear resistance and dimensional stability, so the pin keeps its form under repetitive seating and withdrawal cycles. Lightweight handling characteristics improve ergonomics during fixture changes, while the robust design lowers the risk of deformation in common handling scenarios, ensuring longer service life and fewer replacement intervals. Integrates into established inspection processes Designed as a practical reference component, this gauge pin easily integrates into gauge fixtures, bores and comparative test setups. Its nominal diameter and defined tolerance support reproducible seating against datum surfaces, improving the traceability of measurement results across batches. For laboratories and workshop controls alike, the precise nominal value simplifies inventorying of reference parts and contributes to consistent pass/fail decisions during visual and dimensional inspections. For dependable end‑measure performance choose the Metav IndustryLine gauge pin and contact Metav Werkzeuge for tailored application advice and fast supply from Emmerich. Technical data Article number: M323.C24 GTIN: 4061905067532 Brand: Metav IndustryLine Category: Gauge pins Material: Special steel Facts Diameter: 12.24 mm Measuring range max: 12.24 mm Length: 50 mm Weight: 0.1 kg Tolerance: ±0.002 mm Special features Workshop version End‑measure application Story trigger: end‑measure FAQ What is the nominal diameter of this gauge pin? The nominal diameter of the gauge pin is 12.24 mm; the product is listed as M323.C24 in the Metav IndustryLine range. What tolerance can be expected from the pin? The pin is specified with a tolerance of ±0.002 mm, suitable for tight end‑measure checks where high repeatability is required. How is this pin intended to be used in inspection? This gauge pin is designed for end‑measure inspection, integration into fixtures and for use as a reference pin in comparative checks and go/no‑go assemblies. Is the construction robust enough for regular workshop use? Yes — the workshop version is manufactured from special steel, providing wear resistance and durability for frequent handling on the shop floor. Can this pin be combined with standard test fixtures and gauge blocks? The gauge pin M323.C24 is suitable for use with common fixtures and reference setups, where a defined nominal diameter and tight tolerance improve measurement reproducibility. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12.25mm Gauge Pin Length 50mm Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of workshop‑grade durability, pinpoint ±0.002 mm accuracy and compact dimensions for reliable end‑measure checks. Order the gauge pin directly via Metav Werkzeuge or consult our specialists in Emmerich for application advice. Gauge pin, single, 12.25 mm diameter, 50 mm length — Metav IndustryLine workshop version The gauge pin, single, 12.25 mm diameter, 50 mm length is a compact test pin designed for precision end‑measurement and bore checking tasks in workshop and inspection environments. Workshop version for industrial use Diameter 12.25 mm, length 50 mm High accuracy ±0.002 mm Supplied in transport case Precision tailored to compact inspection tasks The compact test pin is classified in the micro range (measurement range up to 100 mm), which makes it ideal for fine mechanical and small‑part inspection routines. The ±0.002 mm specification communicates the manufacturing tolerance and ensures tight repeatability when used as a reference or checking pin in gauge fixtures. For quality control, a defined tolerance reduces measurement variation and shortens decision times during go/no‑go assessments. Built for workshop handling and repeatable checks Constructed from special steel, the pin is presented in a workshop configuration that accepts frequent handling without sacrificing form stability. The short, stiff geometry and 50 mm overall length reduce flexing during insertion and extraction from bores, supporting consistent contact conditions. Supplied in a protective transport case, the item is protected during storage and transit, maintaining its surface condition for longer service life. Practical integration into inspection routines As a single gauge element, the pin suits quick interchange in fixture stacks, manual checking rigs and end‑measurement setups where compact, precise references are required. The 12.25 mm diameter is suitable for plug‑type verification and functional fit tests. Using a standardised, high‑accuracy pin simplifies logbooks and inspection records and harmonises measurement steps across several workstations, improving throughput and traceability. For reliable bore and end‑measure verification, specify the Metav IndustryLine gauge pin through Metav Werkzeuge or contact our Emmerich team for assistance with process integration Technical data Article number: M323.C25 GTIN: 4061905064104 Label: Gauge pin, single, 12.25 mm diameter, 50 mm length Manufacturer: Metav IndustryLine Facts Diameter: 12.25 mm Length: 50 mm Weight: 0.1 kg Accuracy / tolerance: ±0.002 mm Measurement range: 12.25 mm (fixed) Special features Workshop version Material: Special steel Supplied in transport case Category: Gauge pins ECLASS: 21170231 FAQ Is this pin suitable for precision bore checking? Yes. The gauge pin is specified for end‑measurement and bore checking; its ±0.002 mm tolerance supports precise go/no‑go assessments and repeatable inspection results. What material is the pin made from and why does it matter? The pin is made from special steel, chosen for dimensional stability and resistance to wear in workshop use; this maintains surface integrity and consistent fit during repeated checks. Can the pin be used in fixture stacks or manual gauges? Yes. The compact geometry and fixed 12.25 mm diameter allow the pin to be integrated into fixture stacks, manual checking rigs and inspection benches as a reference element. Is the product delivered ready for storage and transport? The item is supplied in a protective transport case, which preserves the pin's condition during transit and storage and reduces handling damage. Which SKU identifies this gauge pin? This gauge pin is listed as SKU M323.C25 and sold under the Metav IndustryLine label for workshop applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12.26mm Gauge Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of high accuracy, robust special steel construction and a compact 50 mm overall length to ensure reliable end‑measure verification in workshop environments; order directly via Metav Werkzeuge or contact our consultants for application advice. Gauge pin, single, 12.26 mm — 50 mm length, workshop execution (Metav IndustryLine) Gauge pin, single, 12.26 mm intended for precise end‑measure checks and inspection tasks in production and quality control laboratories Precision tolerance ±0.002 mm Special-steel construction for durability 50 mm overall length for end-measure verification Workshop-grade finish for repeatable measurements High accuracy for consistent inspection results The compact inspection pin delivers a verified tolerance of ±0.002 mm, making it suitable where tight dimensional control is essential. Such accuracy reduces rework and improves interchangeability between mating parts; the fine tolerance helps to identify minimal deviations during end‑dimension checks. The small form factor supports quick insertion into gauges and fixtures and contributes to faster, more reliable quality decisions on the shop floor. Robust material and geometry for repeatable handling Manufactured from special steel and finished for workshop use, the pin combines mechanical stability with practical handling. The 50 mm overall length provides sufficient reach for many end‑measure tasks without compromising stiffness, while the nominal diameter of 12.26 mm ensures a snug fit in reference holes and bores. The combination of material and dimensions supports long‑term repeatability under routine inspection loads and regular handling. Practical applications and integration into inspection routines Designed as a single‑piece inspection element (SKU M323.C26), this gauge pin is intended for end‑mass checks, plug‑type verifications and reference measurements during incoming inspection or in‑process control. At a weight of 0.1 kg, it is easy to position in fixtures or removable test nests. The workshop specification and compact size make it a convenient addition to measurement kits used by machinists, quality inspectors and assembly technicians seeking dependable, repeatable measurement references. Contact Metav Werkzeuge for tailored supply options and application guidance for this Metav IndustryLine inspection pin — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M323.C26 GTIN: 4061905064111 Brand: Metav IndustryLine Facts Diameter: 12.26 mm Length: 50 mm Weight: 0.1 kg Tolerance: ±0.002 mm Special features Material: Special steel Single gauge pin delivery Workshop execution Application: end‑measure verification FAQ What is the declared dimensional tolerance of this gauge pin? The gauge pin is specified with a tolerance of ±0.002 mm, providing high‑precision reference for inspection tasks. Which material is used for the inspection pin? This inspection pin is produced from special steel, selected for mechanical stability and workshop durability. For which measurement tasks is this pin suitable? The pin is suitable for end‑measure verification, plug‑type checks and reference measurements in incoming and in‑process inspection. Is the item supplied individually or in sets? The product is supplied as a single gauge pin under SKU M323.C26 for individual use or integration into custom kits. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12.27mm Test Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Combine workshop-ready robustness with sub-millimetre repeatability: ±0.002 mm tolerance and a special steel construction make this small reference pin ideal for reproducible end measurements. Order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.C27 — single, Ø 12.27 mm / 50 mm length (Metav IndustryLine) The gauge pin M323.C27 is a single workshop-grade reference pin, sized for precise end-measurements and repeatable checking in production and inspection environments. Workshop-grade construction Precision tolerance ±0.002 mm Ø 12.27 mm, length 50 mm Supplied in transport box Reproducible reference for tight-tolerance checks A compact reference pin provides a reliable datum for end-measurement tasks where small deviations matter. With a declared tolerance of ±0.002 mm, this gauge achieves repeatable results during short-run checks and serial inspections, reducing uncertainty at the glance. The controlled diameter of 12.27 mm combined with a rigid shaft minimises bending and play, so each contact yields consistent signals for go/no-go comparisons or indirect measurement set-ups. The solid construction is optimised for workshop handling while maintaining metrological stability. Robust, workshop-ready design for everyday use Constructed from special steel and finished for resistance against everyday wear, the pin balances durability and handling comfort. At 50 mm overall length the pin remains easy to seat and to align in fixtures, while the workshop execution protects the calibrated surface. Delivery in a dedicated transport box reduces transit damage and keeps the reference surface clean between uses—small practical measures that extend service life and preserve measurement quality in a busy environment. Practical integration into inspection routines and procurement As a single reference element, the pin is suited for quick go/no-go checks, stack comparisons or to act as a master for setting other gauges. The compact format supports handheld use or placement in fixtures and tight jigs. Procurement benefits include immediate availability through a trusted supplier channel and compatibility with established workshop workflows; the small form factor saves bench space and simplifies stock-keeping for precision accessories. Confidence in repeatable outcomes supports efficient quality control and minimises rework. For reproducible end measurements, request the Metav IndustryLine M323.C27 from Metav Werkzeuge—call +49 2822 7131930 or email info@metav-werkzeuge.com for tailored advice and swift supply Technical data Article number: M323.C27 GTIN: 4061905064128 Category: Gauge pins Workshop version Facts Diameter: 12.27 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Single gauge pin for end-measurement Supplied in transport box for transport protection Workshop execution for robust handling FAQ What tolerance does this gauge pin offer? The gauge pin offers a tolerance of ±0.002 mm, allowing reproducible end-measurement checks with minimal deviation. What are the pin dimensions and form factor? The pin has a diameter of 12.27 mm and a length of 50 mm; it is supplied as a single, workshop-grade reference pin (SKU M323.C27). Is the product suitable for everyday workshop checks? Yes, the workshop execution and transport box protection make the pin well suited to routine go/no-go checks and fixture-based measurements. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12.28mm Test Pin, Single, 50mm Length, Workshop Version, Special Steel - Metav IndustryLine
Take advantage of ±0.002 mm repeatability and a precisely machined Ø 12.28 mm gauge diameter combined with a compact 50 mm length for reliable end‑dimension verification on the shop floor; order via Metav Werkzeuge or ask the consultants for selection support. Test pin M323.C28 — Single gauge pin, Ø 12.28 mm, 50 mm, Metav IndustryLine The Test pin M323.C28 is a workshop‑grade gauge pin designed for precise end‑dimension checks and production control in metrology and inspection applications. Workshop‑grade precision ±0.002 mm Diameter Ø 12.28 mm for end‑dimension checks 50 mm special steel length for stable handling Delivered in a protective transport box Consistent measurement for end‑dimension control The compact gauge is engineered to deliver consistent repeatability when verifying end dimensions on machined parts. With a specified accuracy of ±0.002 mm, this single test pin enables fine tolerance checks that reduce downstream rework and scrap. The Ø 12.28 mm diameter is suited to plug and pin checks where exact end fits are assessed; the short 50 mm length keeps the centre of mass close to the hand, improving manoeuvrability and reducing measurement error. Robust workshop construction that supports daily use Manufactured as a workshop‑version, the pin is made from special steel chosen for dimensional stability and wear resistance under regular use. The solid construction ensures that small, repeatable probing forces do not distort the reference surface, maintaining measurement reliability over many cycles. A compact mass of around 0.1 kg provides a balanced feel during handling while the included protective transport box preserves surface integrity when stored or transported between workstations. Traceability and identifiers for inventory and inspection systems The gauge pin is supplied as a single item and is straightforward to integrate into inspection routines and inventory systems. Identification is simplified by the product identifiers SKU: M323.C28 and GTIN: 4061905064524, which support ordering and traceability within quality documentation. For production environments that require clearly catalogued reference tools, this test pin provides a simple, verifiable element for end‑dimension verification and routine checks. For precise end‑dimension control, request the Metav IndustryLine M323.C28 from Metav Werkzeuge in Emmerich — contact info@metav-werkzeuge.com or call +49 2822 7131930 for technical advice Technical data Article number: M323.C28 GTIN: 4061905064524 Manufacturer: Metav IndustryLine Material: Special steel Length: 50 mm Diameter: 12.28 mm Accuracy: ±0.002 mm Weight: 0.1 kg Facts Length: 50 mm Diameter: 12.28 mm Accuracy: ±0.002 mm Weight: 0.1 kg Special features Workshop version Delivered in protective transport box Single test pin Category: Gauge pin FAQ What accuracy can be expected from this gauge pin? The M323.C28 test pin from Metav IndustryLine specifies an accuracy of ±0.002 mm, suitable for tight end‑dimension checks in production and inspection. Is a calibration certificate included with the item? No calibration certificate is specified for this item in the provided data. For which applications is the pin most suitable? The pin is intended for end‑dimension verification, plug‑type checks and general inspection tasks where a compact, stable reference of Ø 12.28 mm and 50 mm length is required. How is the pin supplied and protected during transport? The product is delivered as a single test pin and supplied in a protective transport box to preserve the measuring surface and enable safe handling. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12.29mm Gauge Pin 50mm Length Workshop Finish - Metav IndustryLine
Take advantage of precise end‑size verification with a compact, workshop‑grade gauge pin: the combination of a 12.29 mm diameter held to ±0.002 mm tolerance and a 50 mm length ensures reproducible checking of bores, fixtures and mating parts. Order the gauge pin directly via Metav Werkzeuge or request advice from the consultants at Metav Werkzeuge for specification support. Single gauge pin Ø 12.29 mm — 50 mm length (Metav IndustryLine) The single gauge pin Ø 12.29 mm (50 mm length) provides compact, high‑precision checking for end‑size measurements and fixture inspection in workshop and production environments. Precision diameter 12.29 mm ±0.002 50 mm length, workshop‑grade special steel Single piece supply for inspection tasks Ideal for end‑size checks and fixture control Repeatable checks in the micro range for tight tolerances Compact gauge pins of this size belong to the micro range, where minimal geometry and high stiffness support accurate measurement of small bores and detail components. The small form factor keeps bending and handling errors low, making this pin particularly suited to tasks such as gauge setting, pass/no‑go checks and verification of mating features. With a defined diameter of 12.29 mm, the accessory supports consistent reference points in serial inspection and quick functional assessments on the shop floor. Diameter control that reduces rework and rejects A declared manufacturing deviation of ±0.002 mm gives direct, measurable benefits in quality control: tighter tolerances on the gauge pin translate into fewer false rejects and more confident acceptance of parts during first‑off and in‑process inspections. The fine tolerance supports precision tasks where process capability is critical and provides a reliable physical standard for comparative checks, helping to speed up go/no‑go decisions and reduce downstream rework. Durable workshop construction for daily handling Manufactured from special steel and finished for workshop use, this gauge pin combines robustness with the surface integrity required for repeated contact checks. The 50 mm length and compact mass make the pin easy to insert and remove in confined fixtures, while the material choice supports longevity under regular use. The item is listed under Metav IndustryLine as M323.C29, reflecting a production focus on durability and consistent geometry suitable for routine inspection tasks. Simple integration into inspection procedures As a single supply gauge pin, the component is straightforward to incorporate into existing measurement routines and fixtures. The clear, numeric identification and the supplied SKU support traceability in procurement and storekeeping, while the compact size enables fast handling during batch checks or individual part verification. Use the pin for end‑size measurements, plug gauges, or as a reference master when setting comparators and gauge blocks in the workshop. For shop‑floor precision and dependable inspection support, choose the Metav IndustryLine gauge pin M323.C29 and contact Metav Werkzeuge in Emmerich for tailored advice and supply coordination. Technical data Article number: M323.C29 GTIN: 4061905064531 Manufacturer: Metav IndustryLine Facts Diameter: 12.29 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Workshop execution Single piece delivery Category: gauge pins (Messstifte) FAQ What materials is this gauge pin suitable for checking? The gauge pin M323.C29 is a reference‑grade pin made from special steel; it is intended for geometric checks and does not depend on a specific workpiece material, making it suitable for typical metal and component inspection tasks. Is the stated tolerance of ±0.002 mm sufficient for production control? Yes; the ±0.002 mm manufacturing deviation of this gauge pin supports fine inspection limits and is appropriate for many precision workshop and tooling checks where sub‑hundredth‑millimetre accuracy is required. Can the gauge pin be used for end‑size and fixture verification? The single gauge pin is designed precisely for end‑size and fixture verification, serving as a reliable physical master for bore checks and mating‑feature assessment in assembly and inspection routines. How is the product identified for reordering and traceability? Reordering and traceability are simplified by the SKU M323.C29 and GTIN 4061905064531; both identifiers can be quoted when referencing the Metav IndustryLine gauge pin in procurement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12.31mm Gauge Pin Length 50mm Workshop Version - Metav IndustryLine
Take advantage of high dimensional fidelity and workshop‑ready durability to keep inspection and fixture checks efficient; the combination of Ø12.31 mm diameter, ±0.002 mm tolerance and robust special steel ensures reproducible results on the shop floor — order the part directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin, single Ø12.31 mm — Metav IndustryLine, 50 mm length A gauge pin, single Ø12.31 mm engineered for end‑measure verification and fixture alignment in workshop and inspection environments. Workshop‑grade execution for everyday inspection Precise diameter Ø12.31 mm with ±0.002 mm tolerance Robust special steel for reliable wear resistance Compact 50 mm length for fixture and end‑measure checks Precision where repeatability reduces rework The gauge pin delivers a clearly defined nominal diameter of Ø12.31 mm combined with a tight ±0.002 mm manufacturing tolerance. This level of dimensional control translates into reliable go/no‑go verifications and accurate reference points for fixture set‑ups, reducing the risk of assembly errors and costly rework. For production and quality departments, the measurable reduction in variance supports faster decision‑making during first‑piece inspection and in‑process checks while maintaining traceability through the part identification. Built for workshop handling and long service life Constructed from special steel and finished for workshop use, the pin balances surface hardness and wear resistance to withstand repetitive engagement in locating and checking tasks. The 50 mm shank length provides sufficient engagement for many standard holders and depth checks while keeping handling compact and ergonomic. The solid construction helps preserve the critical diameter over extended cycles, so downtime for replacements is minimised and measurement consistency across shifts is improved. Clear identification and practical integration into inspection routines Marked and catalogued for straightforward logistics, the component is available as M323.C31 with GTIN 4061905065095, enabling simple stock control and part replacement. Supplied individually, it suits bespoke jigging and end‑dimension checks where single reference pins are required. The combination of precise sizing and clear identification supports lean inspection flows and inventory management in workshops and small production cells. For workshop‑grade precision, request the Metav IndustryLine M323.C31 gauge pin via Metav Werkzeuge — our Emmerich team will advise on suitability for specific fixtures and measurement tasks and arrange supply; contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: M323.C31 GTIN: 4061905065095 Label: Prüfstift, einzeln, 12,31 mm Länge 50 mm Manufacturer brand: Metav IndustryLine Facts Diameter nominal: Ø12.31 mm Length: 50 mm Dimensional tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Execution: workshop version Supply: single piece Intended use: end‑measure and fixture checks FAQ What tolerance can be expected from this gauge pin? The Metav IndustryLine gauge pin M323.C31 is manufactured to a ±0.002 mm tolerance, making it suitable for precise reference and go/no‑go measurement tasks. Is the pin suitable for repeated fixture locating in a production environment? Yes, the pin's special steel construction and workshop execution are designed for repeated use in locating and fixturing applications. How is the part identified for stock and reorder? The item is listed as M323.C31 and carries GTIN 4061905065095 for straightforward inventory control and reordering. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12.32mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Combining workshop-grade construction, 12.32 mm nominal diameter and ±0.002 mm tolerance, this single gauge pin provides a reliable, repeatable reference for end‑measure checks and fixture set‑up; order the item directly via Metav Werkzeuge or consult our specialists for integration advice. M323.C32 gauge pin — 12.32 mm diameter, 50 mm length (workshop version) The M323.C32 gauge pin is a single, workshop‑grade reference pin designed for end‑measurement checks, fixture alignment and quick go/no‑go verification in production and inspection contexts. Workshop‑grade construction Diameter 12.32 mm, tight tolerance ±0.002 mm Length 50 mm for fixture and jig use Supplied in a transport case for secure handling Precision as a practical asset for production control The compact, hardened gauge pin brings industrial‑grade repeatability to everyday measurement tasks. With a nominal diameter of 12.32 mm and a stated tolerance of ±0.002 mm, the pin functions as a stable reference for end‑measure checks and go/no‑go verifications; this level of precision reduces rework and speeds up set‑up times in serial production. The declared accuracy is expressed as a practical advantage: consistent reference dimensions mean fewer stoppages and clearer pass/fail decisions on the shop floor. Robust workshop design that simplifies handling Built in a workshop version specification from special steel, the pin withstands frequent insertion and withdrawal in jigs and gauges. The 50 mm overall length offers sufficient engagement for most fixture and bore checks while remaining easy to manoeuvre by a single operator. Delivery in a dedicated transport case protects the reference surface during storage and transit, preserving calibration and surface integrity so that interchangeability between tooling setups is maintained. Integration into inspection workflows and traceability As a single gauge element, the pin is straightforward to incorporate into fixture sets, end‑measure routines and maintenance checks where precise reference diameters are required. The compact format supports rapid replacement within locator stacks or gauge plates, improving throughput in repetitive inspection tasks. Traceable labelling (SKU M323.C32, GTIN 4061905065101) eases inventory control and documentation within quality processes, helping to demonstrate consistent measurement practice in internal audits. For workshop‑grade reference pins from Metav IndustryLine, contact Metav Werkzeuge in Emmerich for tailored advice and order placement: info@metav-werkzeuge.com — +49 2822 7131930 Technical data Article number: M323.C32 GTIN: 4061905065101 Material: Special steel Category: Gauge pin SKU: M323.C32 Weight: 0.1 kg Tolerance: ±0.002 mm Length: 50 mm Nominal diameter: 12.32 mm Facts Diameter: 12.32 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Label: Prüfstift, einzeln, 12,32 mm Länge 50 mm Special features Workshop version Supplied in transport case for secure handling High‑precision reference for end‑measure checks Suitable for fixture alignment and go/no‑go verification FAQ What applications suit this gauge pin best? This gauge pin is intended for end‑measure checks, fixture alignment and go/no‑go verifications in workshop and production inspection tasks; the M323.C32 is optimised for repeatable reference diameters. How precise is the diameter of the pin? The nominal diameter is 12.32 mm with a stated tolerance of ±0.002 mm, providing a high‑precision reference for dimensional control. What material is the pin made from and why does it matter? The pin is manufactured from special steel, chosen for wear resistance and stable dimensional behaviour under routine handling and repeated seating in fixtures. Is the gauge pin protected during transport and storage? Yes, the pin is supplied in a transport case to protect the reference surface and preserve measurement integrity during handling and storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12.33mm Test Pin 50mm Length Workshop Version - Metav IndustryLine
Precision test pin ensures consistent inspection results and easy handling in workshop environments thanks to its special steel construction and tight ±0.002 mm dimensional tolerance. Benefit from reliable end‑gauge checks and protected transport — order the part directly via Metav Werkzeuge or consult our specialists for integration advice. Test pin M323.C33 — workshop test pin, Ø 12.33 mm, length 50 mm (Metav IndustryLine) Test pin M323.C33 is a workshop‑grade end‑gauge pin designed for fast, repeatable dimensional checks in production and inspection tasks. Workshop-grade design Ø 12.33 mm for end-gauge measurements Length 50 mm for deep reaches Tolerance ±0.002 mm high precision Supplied in protective transport case Consistent measurement accuracy for fewer rejects The solid 12.33 mm diameter coupled with a declared ±0.002 mm tolerance delivers a measurable improvement in repeatability for routine end‑gauge checks. Where small dimensional deviations lead to rework or scrap, this pin provides a verifiable reference point for go/no‑go assessments and fixture alignment. The tight tolerance is stated as a manufacturing characteristic, enabling quality teams to document measurement uncertainty and maintain process control without additional adjustment steps. Durable construction built for daily workshop use Manufactured from special steel and offered in a workshop version, the pin resists the mechanical stresses of regular handling and insertion. The 50 mm length gives access to recessed features while preserving a compact profile that minimises bending moments during use. Supplied in a protective case for transport, the design keeps the measuring surface clean and reduces the risk of knocks that would otherwise necessitate replacement — a clear operational advantage in busy production environments. Simple integration into inspection and fixture workflows As an end‑gauge component, the pin suits bench checks, fixture set‑up and quick comparative measurements on the shop floor. Its form factor allows straightforward mounting in holders or comparison against master gauges during setup. Using a defined test pin such as this reduces set‑up time and supports consistent tactile feedback when checking seating or depth, which benefits operators performing high volumes of small inspections. Practical partner for precision across the workshop Choosing a Metav IndustryLine component means access to products intended for everyday industrial use and supported by a European distribution hub. The workshop edition of this test pin emphasises reliability and straightforward handling: fewer interruptions to production, predictable inspection results and simplified stockkeeping for precision accessories. For purchasers seeking robust, ready‑to‑use measuring aids, this pin forms a dependable element of the inspection kit. Order the Metav IndustryLine test pin M323.C33 for robust, high‑precision end‑gauge checks — contact Metav Werkzeuge in Emmerich for technical guidance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M323.C33 GTIN: 4061905065118 Category: Test pins / Messstifte Brand: Metav IndustryLine Facts Diameter: 12.33 mm Length: 50 mm Accuracy / tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Workshop version Supplied in protective transport case Intended use: end‑gauge measurements FAQ Is this pin suitable for use as an end‑gauge reference? Yes. The M323.C33 test pin is designed for end‑gauge measurements and provides a defined reference diameter for go/no‑go and seating checks. What tolerance can be expected from the pin? The declared tolerance for this test pin is ±0.002 mm, giving the dimensional consistency required for routine inspection work. Which material is used for the pin and what does that mean in practice? The pin is made from special steel, which offers workshop durability and resistance to routine wear associated with insertion and removal during checks. Does the delivery include protective packaging? Yes. The item is supplied in a protective transport case to preserve the measuring surfaces and simplify storage. Can the pin be used in fixture set‑ups and gauge assemblies? Yes. The pin’s form and length are suitable for mounting in holders and for use during fixture alignment and quick comparative inspections. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12.34mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of high positional accuracy ±0.002 mm, robust special-steel construction and a compact 50 mm length for reliable end-measure checks; order this precision gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin, single, 12.34 mm — 50 mm length (Metav IndustryLine) The Gauge pin, single, 12.34 mm, length 50 mm is a workshop-grade precision pin designed for end-measure checks, fit verification and small-assembly gauging in production and inspection environments. Workshop-grade execution Diameter 12.34 mm, length 50 mm Dimensional accuracy ±0.002 mm Made from special steel Accurate size control for fast inspection decisions The compact pin offers 12.34 mm nominal diameter with a ±0.002 mm tolerance, giving a trustworthy reference for go/no-go assessments and clearance verification. With such high dimensional precision, the pin reduces decision time in quality control routines and supports repeatable checks on mating bores or reference surfaces. The hardened surface and consistent geometry ensure contact behaviour remains stable across repeated use, which translates directly into fewer measurement-related reworks. Robust construction for workshop demands Built in a workshop-grade specification from special steel, this pin resists wear and maintains its calibrated dimensions under typical shop-floor handling. The 50 mm overall length provides enough engagement for many end-measure checks while keeping handling simple and ergonomic. The material choice balances hardness and toughness so that performance is maintained during routine insertion and extraction in production testing. Practical integration into inspection workflows The straightforward geometry and nominal size make the pin suitable for use as a reference in manual gauging setups, fixture verification and quick fit tests on assemblies. Its compact form factor supports rapid changeovers and storage without occupying significant bench space. When paired with simple holders or bench fixtures, the pin becomes a practical tool for fast, repeatable checks that feed reliable data into production-control decisions. Traceable identity and supply reliability Each unit is supplied with clear identification to support inventory management and traceability. The combination of precise tolerances and a stable supply channel helps workshops maintain consistent inspection standards across shifts and batches. Relying on a recognised distributor ensures continuity and access to replacements when process stability demands it. Contact Metav Werkzeuge today by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss delivery and suitability of the Metav IndustryLine gauge pin for your inspection setup Technical Data Article number: M323.C34 GTIN: 4061905065125 Manufacturer: Metav IndustryLine SKU: M323.C34 Facts Nominal diameter: 12.34 mm Length: 50 mm Weight: 0.1 kg Dimensional accuracy: ±0.002 mm Special features Material: Special steel Workshop execution Suitable for end-measure and fit testing FAQ What applications is this gauge pin intended for? This gauge pin from Metav IndustryLine is made for end-measure checks, fit verification and small-assembly gauging where a 12.34 mm reference is required. How precise is the diameter? The diameter is specified at 12.34 mm with a dimensional tolerance of ±0.002 mm, providing reliable go/no-go reference for inspection tasks with tight clearances. What material is the pin made from? The Metav IndustryLine gauge pin is manufactured from special steel, chosen for wear resistance and stable contact behaviour under workshop conditions. Can this pin be used for fixture verification? Yes, its stable geometry and 50 mm length make it suitable for checking fixtures, mating bores and simple bench-mounted gauging setups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12.35mm Test Pin, Single, 50mm Length Workshop Finish - Metav IndustryLine
Take advantage of the combination of workshop-grade robustness and tight dimensional control — a small, purpose-built inspection pin that brings reliable repeatability to routine checks; order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin M323.C35 — single test pin, Ø 12.35 mm, 50 mm length (Metav IndustryLine) A single gauge pin (Ø 12.35 mm, 50 mm length) for fast, repeatable go/no-go and reference checks in workshop and inspection environments. Workshop-grade construction for robust use Diameter precisely 12.35 mm for reference fits Length 50 mm for deep seat measurements Tolerance ±0.002 mm for high repeatability Precision that supports efficient quality control The M323.C35 is engineered as a dedicated gauge pin for dimensional verification where small deviations matter. With a nominal diameter of 12.35 mm and a declared positional tolerance of ±0.002 mm, this test pin serves as a clear, objective reference in pass/fail procedures. The fine tolerance reduces rework and speeds up decision-making on the shop floor, which translates into fewer stoppages and a more predictable production flow. Technical terms: the tolerance indicates the maximum permitted deviation from nominal diameter under typical inspection conditions. Robust material and compact geometry for repeatable handling Constructed from special steel, the pin combines surface stability with mechanical resilience appropriate for repeated seating and withdrawal. The 50 mm length provides adequate engagement for deeper bores or locating features while remaining easy to handle by one operator. The workshop-focused design prioritises repeatability under everyday use rather than delicate laboratory handling, so the component keeps its reference dimension across many cycles and aids consistent fixture alignment. Integration into inspection routines and fixtures As a single reference element, the test pin fits into manual inspection, fixture set-up and quick functional tests. Marked with model M323.C35 for clear traceability, it can be used as a master for plug checks or as a contact reference during assembly verification. The compact form factor means minimal fixturing adaptations are required and the pin slots easily into existing gauges or simple bespoke holders. Where traceability is required, annotate the pin’s identification in the inspection log to link physical checks to measurement records. Practical benefits and workplace reliability Small inspection tools like this pin reduce measurement uncertainty by providing a direct physical standard rather than relying on inferred dimensions. The combination of a precise 12.35 mm diameter, short but usable engagement length and a tight ±0.002 mm tolerance supports quicker decisions, fewer measurement repetitions and steadier output quality. The robust finish of the body limits corrosion and wear in typical workshop atmospheres, helping to maintain reference dimensions over time. Contact Metav Werkzeuge today to specify the Metav IndustryLine gauge pin M323.C35 for your inspection routine — our Emmerich team will confirm availability and advise on delivery at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M323.C35 GTIN: 4061905066061 Facts Diameter: 12.35 mm Length: 50 mm Weight: 0.1 kg Tolerance: ±0.002 mm Special features Material: Special steel Workshop version Single test pin FAQ What is the declared tolerance of this gauge pin? The gauge pin M323.C35 is specified with a tolerance of ±0.002 mm, suitable for tight workshop reference checks. Can the pin be used in deeper bores and fixtures? Yes, the 50 mm length provides sufficient engagement for deeper seats and the pin is compatible with common workshop fixtures. What material is the test pin made from? This single test pin is manufactured from special steel chosen for wear resistance and dimensional stability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12.36mm Gauge Pin Single, 50mm Length, Workshop Version - Metav IndustryLine
Precise, compact inspection capability combined with robust material choice ensures consistent end‑dimension checks in production and workshop environments. The ±0.002 mm accuracy together with a 12.36 mm diameter and a 50 mm working length provide reproducible reference points for go/no‑go checks and fixture setups. Order the component directly via Metav Werkzeuge or consult the advisers for application-specific guidance. Test pin M323.C36 — single inspection pin, 12.36 mm diameter, 50 mm length (Metav IndustryLine) The Test pin M323.C36 is a compact inspection pin designed for dimensional verification and end‑measurement tasks in industrial metrology and workshop quality control. Precision accuracy ±0.002 mm Diameter 12.36 mm, length 50 mm Special steel construction for wear resistance Reproducible precision for everyday inspection This single inspection pin is manufactured to tight mechanical tolerances, offering ±0.002 mm positional accuracy that supports reliable pass/fail assessments on production lines and in inspection benches. The nominal 12.36 mm diameter and 50 mm length make the pin suitable as a reference for end‑dimension checks and punch gauge verification. With its compact form factor, the component provides a stable contact point that minimises measurement scatter and reduces reworking cycles — a direct efficiency gain for process control and quality assurance. Durable construction for workshop use Built as a workshop version, the item is machined from special steel chosen for dimensional stability and wear resistance under repetitive contact. The robust material selection extends service life where frequent seating or probing occurs, while the compact geometry eases handling in confined fixtures and assembly jigs. This combination of durability and accessibility supports uninterrupted production throughput and contributes to predictable maintenance intervals — a clear operational advantage in busy manufacturing settings. Identification and integration into QA workflows Marked as a single part with the SKU M323.C36, the inspection pin can be integrated into existing check fixtures, comparator setups and manual gauging procedures. The product data includes a GTIN for catalogue and inventory use, simplifying procurement and stock management. As a precision inspection component from Metav IndustryLine, it complements a broader toolkit for metrology applications, enabling consistent dimensional control without adding complexity to measurement routines. For reliable end‑dimension checks and integration into quality workflows, request the M323.C36 via Metav Werkzeuge or ask the sales advisers for specification matching and delivery options. Technical data Article number: M323.C36 GTIN: 4061905066078 Manufacturer: Metav IndustryLine Data Diameter: 12.36 mm Length: 50 mm Accuracy / tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Version: Workshop execution Packaging: single item Category: Inspection pin (Messstifte) FAQ What level of dimensional accuracy does the test pin provide? The M323.C36 is specified with an accuracy of ±0.002 mm, suitable for tight go/no‑go and reference measurements. Is the component suitable for fixture and jig checking? Yes, the pin’s 12.36 mm diameter and 50 mm length make it appropriate for fixture verification, comparator use and end‑dimension checks. What material is used for the pin? The inspection pin is manufactured from special steel, selected for dimensional stability and wear resistance in workshop conditions. How is the product supplied? This item is supplied as a single inspection pin identified by SKU M323.C36 and the GTIN shown in the technical data. Can the pin be used in automated inspection stations? The compact geometry and precise tolerance lend the component to integration in manual and automated inspection setups where a fixed reference or probe contact is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12.37 mm Gauge Pin, Single, 50 mm Length, Workshop Version - Metav IndustryLine
Take advantage of a compact reference gauge that combines diameter accuracy, robust special‑steel construction and workshop‑ready handling for reproducible end‑measure checks; order through Metav Werkzeuge or consult our advisors for specification support. Gauge pin, single, 12.37 mm, length 50 mm — Metav IndustryLine, ±0.002 mm tolerance A Gauge pin, single, 12.37 mm, length 50 mm designed as a precise cylindrical reference for inspection, alignment and end‑measure control in workshop metrology. Diameter 12.37 mm, tolerance ±0.002 mm Length 50 mm workshop execution Made from special steel Supplied in protective transport case Consistent reference for inspection and alignment A precisely machined cylindrical reference such as this gauge pin provides a repeatable datum for a range of inspection tasks. The nominal diameter 12.37 mm combined with a tolerance of ±0.002 mm reduces measurement scatter and shortens inspection cycles; operators gain reliable pass/fail decisions faster and with fewer rechecks. In practice, a single, accurately held pin simplifies set‑up for gauging fixtures and alignment jigs, delivering quantifiable time savings in routine quality control. Built for workshop use and robust handling The workshop configuration and special‑steel construction prioritise durability without adding unnecessary bulk. At 50 mm length the pin is compact enough for easy handling yet long enough to act as a stable reference in assembly and inspection tasks. Supplied in a protective transport case, the pin reaches the workplace ready for use and is protected against transit damage — a pragmatic solution where repeatability and handling resilience matter most. Practical integration into measurement routines This single gauge pin is suitable as an individual reference or as a replacement element in existing sets; the compact 0.1 kg weight and standard form factor make it straightforward to insert into plug gauges, test fixtures or measuring stands. The achieved accuracy ±0.002 mm supports high‑precision checks without requiring specialised instruments, which helps maintain throughput on the shop floor while preserving measurement confidence. For reliable, workshop‑ready reference measures choose the Metav IndustryLine gauge pin and contact Metav Werkzeuge for procurement and technical advice tailored to production needs. Technical Data Article number: M323.C37 GTIN: 4061905066085 Manufacturer: Metav IndustryLine Weight: 0.1 kg Facts Nominal diameter: 12.37 mm Tolerance: ±0.002 mm Length: 50 mm Special features Material: special steel Workshop execution Supplied in protective transport case Single gauge pin FAQ What accuracy can be expected from this gauge pin? The gauge pin has a tolerance of ±0.002 mm; the Gauge pin, single, 12.37 mm, length 50 mm from Metav IndustryLine is manufactured to that specification for reproducible reference measurements. Is the pin suitable for use in workshop gauging fixtures? Yes; the workshop execution and compact 50 mm length make the gauge pin appropriate for integration into gauging fixtures and alignment jigs in a production environment. What material is the gauge pin made from? The pin is made from special steel, chosen for dimensional stability and practical durability in workshop conditions. What identifiers are available for ordering or stock checks? Stock and ordering can be referenced by SKU M323.C37 and GTIN 4061905066085 for the Metav IndustryLine gauge pin. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12.38mm Test Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of workshop‑grade construction, tight ±0.002 mm tolerance and compact 50 mm length for dependable end‑dimension checks; order the gauge pin directly via Metav Werkzeuge or contact our consultants for application advice. Gauge pin M323.C38 — 12.38 mm diameter, 50 mm length (Metav IndustryLine) The Gauge pin, single, 12.38 mm (50 mm length) is a workshop‑grade inspection pin for fast verification of end‑dimensions and bore gauges in production and maintenance environments Workshop‑grade construction Diameter 12.38 mm with ±0.002 mm tolerance 50 mm overall length for compact handling Made from special steel for durability Consistent measurement accuracy for production control The M323.C38 gauge pin delivers repeatable results thanks to its tight ±0.002 mm manufacturing tolerance, which reduces uncertainty during end‑dimension verification. In process control terms, that level of precision minimises false rejects and supports stable quality gates on the shop floor. As a hardened inspection insert, the pin provides a defined reference for bore checks and comparative measurements, making statistical process control easier to implement and interpret. Durable materials and workshop fit for everyday use Manufactured from special steel, the pin is designed for robust handling in workshop environments. The material choice prioritises wear resistance and dimensional stability so that the reference diameter remains consistent over many cycles. Its workshop‑execution finish balances protection against damage with easy handling during repeated inspections, which lowers replacement frequency and maintenance overhead in routine quality checks. Compact form factor that speeds up inspection routines At 50 mm overall length and a precise 12.38 mm diameter, this inspection pin fits comfortably in single‑hand operation and in dedicated gauge fixtures. The compact size makes it convenient for swift go/no‑go checks, end‑dimension confirmation and the verification of finished parts without time‑consuming set‑up. The modest weight further aids manual handling and helps integrate the pin into small inspection jigs or portable test kits. Easy traceability and shop integration Delivered as a single, identifiable item with SKU M323.C38 and GTIN for inventory control, the pin is straightforward to document within quality systems and measurement logs. Its clear specifications enable quick selection for specific end‑dimension tasks and help align inspection steps with documented quality procedures. Combining predictable behaviour with traceable identifiers supports reliable record keeping and audit readiness. Contact Metav Werkzeuge in Emmerich for application recommendations or to request a specification sheet for the Metav IndustryLine M323.C38 gauge pin — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M323.C38 GTIN: 4061905066092 ECLASS: 21170231 SKU: M323.C38 Core measurements Diameter: 12.38 mm Length: 50 mm Weight: 0.1 kg Tolerance: ±0.002 mm Materials & special features Material: special steel Version: workshop execution Application focus: end‑dimension verification Story trigger: end masses FAQ What measurement tolerance can be expected from this gauge pin? The Metav IndustryLine gauge pin M323.C38 is manufactured to a tolerance of ±0.002 mm, which is suitable for fine inspection work and consistent end‑dimension checks. Is the M323.C38 suitable for verifying bore diameters? Yes. The 12.38 mm diameter and precise finish make the M323.C38 ideal for checking bore sizes and confirming end‑dimensions in routine inspection tasks. What material is used for this inspection pin and why does it matter? The pin is made from special steel, chosen for wear resistance and dimensional stability so that the reference diameter remains consistent over repeated use. How should the gauge pin be integrated into a quality workflow? Record the SKU M323.C38 and GTIN in the measurement log, use the pin as a reference in comparative checks or fixture inserts, and replace when wear affects the ±0.002 mm tolerance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12.39mm Gauge Pin, Single, 50mm Length, Workshop Finish - Metav IndustryLine
Take advantage of the combination of high repeatability, workshop-grade robustness, and a compact 50 mm length for consistent inspection results; order the pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin, single — 12.39 mm diameter, 50 mm length (Metav IndustryLine) A gauge pin designed as a single inspection pin for precise bore checking and workshop measurement tasks Precision diameter 12.39 mm Length 50 mm for tight fits Tolerance ±0.002 mm Workshop-grade construction Precision where it counts for quality control This cylindrical inspection pin delivers high repeatability thanks to a tight manufacturing tolerance of ±0.002 mm, making it suitable for go/no‑go checks, alignment tasks and final inspection steps. Manufactured from special steel, the component holds its shape under repeated use and provides a consistent contact interface for mechanical gauges and fixtures. The combination of a defined 12.39 mm diameter and close tolerance reduces measurement uncertainty and supports reproducible results across batches and operators, which is crucial for process control in production environments. Designed for practical workshop handling and durability With a compact 50 mm length and a workshop specification build, the pin is tailored for routine use on the shop floor. The shorter length reduces bending moment and improves handling during manual insertion into bores or gauges, while the special steel construction balances wear resistance and machinability. Supplied as a single piece and packaged for transport in a protective case, the item is ready for immediate integration into inspection sets and portable kits, simplifying storage and minimising the risk of damage during transit. Traceability and fit-for-purpose application The inspection pin is supplied under SKU M323.C39 and is traceable via GTIN 4061905066108, which supports inventory control and audit trails in quality systems. As a standard workshop inspection tool, the pin complements existing gauge assortments and fixture setups; its defined diameter and repeatable contact surface make it useful for quick size verification, alignment of mating parts and production spot checks. For bespoke fixturing or automated feeding, the consistent geometry of this test pin helps reduce downstream setup time. Contact Metav Werkzeuge today to discuss suitability for measurement routines or to request further product information — Metav Werkzeuge can advise on integration and availability Technical data SKU: M323.C39 GTIN: 4061905066108 Label: Gauge pin, single, 12.39 mm, length 50 mm Manufacturer: Metav IndustryLine Facts Diameter: 12.39 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Workshop specification Material: Special steel Supplied as single piece Delivered in a protective transport case FAQ What is the dimensional tolerance of the inspection pin? The inspection pin is manufactured to a tolerance of ±0.002 mm, providing high repeatability for inspection and alignment tasks. Which material is used for the pin and what does it mean for wear? The pin is made from special steel; this gives a balance of surface hardness and toughness suitable for repeated insertion and inspection use. Is the product supplied as a single piece or in sets? This item is supplied as a single inspection pin under SKU M323.C39 and packed in a protective transport case for safe handling. What typical applications suit this type of pin? Common uses include go/no‑go checks, bore verification, alignment of mating components and inclusion in portable inspection kits. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12.3mm Gauge Pin, 50mm Length, Workshop Version in Special Steel - Metav IndustryLine
Taking advantage of tight tolerances and robust construction, this gauge pin combines ±0.002 mm repeatability with a 50 mm shaft for reliable fit and reference checks. Order the gauge pin directly via Metav Werkzeuge or request advice from our consultants for application support. Gauge pin, single — Ø 12.3 mm × 50 mm (Metav IndustryLine) A gauge pin (Ø 12.3 mm, 50 mm) designed for precise reference measurements, fit checks and assembly alignment in workshop inspection and metrology tasks High precision ±0.002 mm Diameter Ø 12.3 mm for exact fits 50 mm length for deeper checks Special‑steel workshop design Precision that reduces rework and speeds inspection The pin offers a measured accuracy of ±0.002 mm, which translates into consistent reference points for go/no‑go testing and jig alignment. With such narrow tolerance, the element supports repeatable verification of hole fits and shaft clearances, reducing the risk of rejects and rework. The Ø 12.3 mm nominal diameter is suited to matching gauges, alignment fixtures and press‑fit checks; where statistical process control is applied, this level of precision helps tighten control limits without adding complexity. Built for everyday workshop use and wear resistance Manufactured from special steel, the component resists wear under regular handling and remains dimensionally stable during routine use. The 50 mm length provides enough engagement for deeper assemblies while remaining easy to handle and store. The workshop version construction balances toughness with finish quality so that repeat measurements remain reliable even in industrial environments. A compact mass of approximately 0.1 kg ensures comfortable handling during repetitive tasks. Practical integration into inspection and assembly workflows As a single inspection pin, the component adapts easily to manual test benches, fixture blocks and simple gauge sets. The design supports quick verification steps in assembly lines and maintenance checks, delivering measurable time savings through reduced setup and faster go/no‑go decisions. Supplied as an individual item with the designation M323.C30, the pin is appropriate for precision maintenance shops, quality control benches and small‑batch production where dependable, repeatable reference gauges are required. Contact Metav Werkzeuge today for technical advice or to request the M323.C30 gauge pin; email info@metav-werkzeuge.com or call +49 2822 7131930 for specification support and availability Technical data Article number: M323.C30 GTIN: 4061905065088 Weight: 0.1 kg Material: Special steel Nominal diameter: 12.3 mm Length: 50 mm Tolerance / accuracy: ±0.002 mm Version: Workshop execution Core figures Mass: 0.1 kg Diameter nominal: 12.3 mm Length shaft: 50 mm Accuracy: ±0.002 mm Materials & features Special steel construction Single gauge pin delivery Workshop design for regular use Suitable for fit and reference measurements FAQ What level of accuracy can be expected from this gauge pin? The gauge pin provides an accuracy of ±0.002 mm, which ensures repeatable reference measurements for fit and inspection tasks. Is this pin suitable for use in a production inspection routine? Yes, the M323.C30 inspection pin is designed for workshop and small‑batch production checks, integrating easily into manual gauges and fixture tests. What material is used for the pin and how does it affect durability? The pin is made from special steel, offering enhanced wear resistance and dimensional stability for repeated use in workshop environments. Does the product come as a single item or in sets? This listing refers to a single gauge pin delivered individually under the designation M323.C30. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12.41mm Gauge Pin Length 50mm Workshop Version, Special Steel - Metav IndustryLine
Take advantage of precise dimensional control with a 12.41 mm diameter gauge pin that combines workshop robustness and tight tolerance for dependable inspection results; the 50 mm length and delivery in a protective case support safe handling and transport. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin, single — 12.41 mm Ø, 50 mm length (Metav IndustryLine) The gauge pin, single — 12.41 mm Ø, 50 mm length is a workshop-grade precision pin for plug and bore checks in inspection benches and production control. Workshop-grade precision finish Diameter tolerance ±0.002 mm Supplied in protective transport case Reliable dimensional control that reduces rework A 12.41 mm diameter pin with a declared ±0.002 mm deviation offers a dependable reference for go/no-go checks and quick bore verification. The tight tolerance translates into fewer measurement cycles and reduced rework, because uncertainties in the reference part are minimised. This precision is particularly valuable where small deviations cascade into assembly failures, so using a stable reference pin speeds up quality decisions and shortens inspection loops. Engineered for repeatable fit and safe handling The 50 mm length provides a reliable engagement depth for many common bores while remaining compact for one-handed handling at the bench. Constructed from special steel in a workshop execution, the pin resists wear and keeps its geometry under repeated use; the modest mass (approx. 0.1 kg) makes it easy to position without inducing unwanted deflection. Together, these attributes ensure repeatable seating and a consistent feel during tactile inspection tasks. Transport protection and traceability for everyday use Supplied in a protective case for transport, the pin arrives ready for safe storage and mobile inspection routines, reducing the risk of accidental damage during handling. Traceability is supported by the item's identifiers, which make inventory and quality records straightforward to maintain. The combination of durable packaging and clear labelling helps keep the reference part in serviceable condition and simplifies audit trails within the workshop. Versatile inspection tool for workshop and inspection benches As a single gauge pin in a standard diameter, this precision pin suits rapid plug checks, alignment aids and setup routines where a compact, accurate reference is required. The workshop-oriented finish balances robustness with the dimensional stability needed for regular quality checks. For tailored measurement setups or integration into inspection jigs, specialist advice is available from the Metav Werkzeuge team, whose logistical presence in Emmerich acts as a quality filter for the European market. Contact Metav Werkzeuge for ordering advice or to discuss how this Metav IndustryLine gauge pin fits specific inspection workflows — Metav Werkzeuge provides fast, expert consultancy from Emmerich to your workshop. Technical data SKU: M323.C41 GTIN: 4061905066122 Label: Prüfstift, einzeln, 12,41 mm Länge 50 mm Manufacturer: Metav IndustryLine Facts Diameter: 12.41 mm Length: 50 mm Declared deviation: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Workshop execution Supplied in protective transport case Category: Messstifte Story trigger: endmasse FAQ What is the diameter tolerance of this gauge pin? The gauge pin M323.C41 is specified with a diameter deviation of ±0.002 mm, suitable for precise plug and bore checks. Which material is the pin made from? The pin is made from special steel, chosen for wear resistance and long-term dimensional stability under workshop use. Is the pin supplied ready for safe transport and storage? Yes — the pin is supplied in a protective transport case to reduce the risk of damage during handling and to support reliable storage. For which inspection tasks is this pin most suitable? This single gauge pin is ideal for quick plug checks, alignment aids and setup routines where a compact, accurate reference is required on the inspection bench. What identifiers help with traceability and inventory control? The item is listed as SKU M323.C41 with GTIN 4061905066122, enabling straightforward recording in stock and quality systems. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12.42mm Gauge Pin Single 50mm Length Workshop Finish - Metav IndustryLine
Combining workshop-grade construction, special steel and a tight tolerance of ±0.002 mm, this gauge pin delivers repeatable end‑measurements for routine inspection tasks. Order the part directly via Metav Werkzeuge or consult our specialists for application guidance. Gauge pin M323.C42 – Test pin, Ø 12.42 mm, 50 mm length (Metav IndustryLine) Gauge pin M323.C42 is a single test pin engineered for precise end‑measurement and go/no‑go checks in workshop and inspection environments. Precision diameter Ø 12.42 mm Length 50 mm for confined spaces Tolerance ±0.002 mm for fine control Workshop version in special steel Reliable precision for end‑measurement tasks The M323.C42 is built for consistent end‑measurements, offering a declared accuracy of ±0.002 mm (equivalent to 2 µm) that supports tight tolerance verification in everyday workshop routines. Such fine control minimises uncertainty when checking mating parts, reference seats or production samples, enabling faster decision‑making on accept/reject criteria. The declared tolerance is suitable for fine quality checks and integration into standard inspection sequences where micron‑level reliability is required. Robust workshop design for repeatable handling Designed as a workshop version, the test pin is manufactured from special steel to withstand regular handling and the mechanical demands of routine checks. With a length of 50 mm and a diameter of 12.42 mm, the geometry is compact enough for confined spaces while providing sufficient engagement for stable measurements. Supplied as a single piece, the pin is delivered in a transport case (plastic or wooden) to protect the gauge during transit and on the bench, improving longevity and ensuring the product reaches the workplace ready for immediate use. Workflow benefits and practical integration The gauge pin simplifies inspection workflows by serving as a clear reference for end‑diameter checks and seating verifications; its compact form and low mass support rapid handling and short cycle checks. Labelling and traceability fields are provided in the product data, enabling straightforward inventory control and integration into measurement routines. The combination of workshop‑grade materials and tight tolerance reduces rework and supports a higher first‑pass yield in production environments where reliable end‑measurements are essential. For assured workshop performance, request the M323.C42 gauge pin from Metav Werkzeuge or contact our consultants at Metav Werkzeuge for tailored specification advice and delivery options Technical data Article number: M323.C42 SKU: M323.C42 GTIN: 4061905066306 Label: Gauge pin, single, 12.42 mm, length 50 mm Facts Diameter: 12.42 mm Length: 50 mm Weight: 0.1 kg Accuracy: ±0.002 mm Special features Material: Special steel Workshop version Delivered in transport case (plastic or wooden) Intended use: end measurements FAQ What is the declared accuracy of this gauge pin? The M323.C42 gauge pin is specified with an accuracy of ±0.002 mm, suitable for fine control in workshop inspection tasks. Which material is used for the test pin? This test pin is made from special steel, chosen for durability in regular workshop use. Is the gauge pin delivered individually or as a set? The M323.C42 is supplied as a single piece and delivered in a transport case to protect it during transit. For which applications is this pin intended? The pin is designed primarily for end‑measurements, seating checks and go/no‑go verifications in production and inspection routines. What are the physical dimensions of the product? Diameter 12.42 mm and length 50 mm are the nominal dimensions for the M323.C42 gauge pin. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12.43mm Gauge Pin, Single, 50mm Length Workshop Finish - Metav IndustryLine
Take advantage of the combination of workshop-grade robustness, tight dimensional tolerance and simple handling for dependable inspection work; order the gauge pin directly via Metav Werkzeuge or consult the team for application advice. Gauge pin M323.C43 — 12.43 mm diameter, 50 mm overall length (Metav IndustryLine) A single gauge pin 12.43 mm / 50 mm engineered for precise end‑measurement and fit checks in inspection and assembly environments High repeatability ±0.002 mm Diameter 12.43 mm, length 50 mm Made from special steel Supplied in protective transport box Reliable tolerance for repeatable inspection results The M323.C43 inspection pin is produced to a tight tolerance of ±0.002 mm, delivering consistent results in successive checks. This level of accuracy supports traceable quality control when measuring bore fits, plug gauges and mating parts. Specified tolerance and stable geometry minimise rework and enable clear go/no‑go assessment during incoming inspection or assembly verification. Robust material and workshop design for everyday use Manufactured from special steel, the test pin combines surface hardness with resistance to wear, making it suitable for frequent insertion and withdrawal cycles. The workshop version construction focuses on durability and easy handling, so routine checks remain fast and reliable. The solid design reduces the risk of deformation under normal use, preserving the functional diameter and ensuring measurement stability. Practical handling and transport that protect accuracy At 50 mm overall length and 12.43 mm diameter, the pin offers a compact footprint that is convenient for bench work and bench‑mounted gauges. Delivery includes a protective transport box, which helps prevent knocks and contamination that could affect the measuring surface. Clear labelling on the box and the single‑piece format simplify inventory and reduce the potential for mix‑ups in toolrooms. How this tool fits into inspection workflows The test pin serves as a straightforward reference for end‑measurement tasks and fit verification in production and maintenance. Its repeatability supports statistical process control routines and quick comparative checks against plug gauges or bore standards. Where reproducible go/no‑go assessment is required, the pin provides a stable datum that integrates smoothly into quality documentation and inspection logs. Contact Metav Werkzeuge today for tailored application advice or to order the Metav IndustryLine gauge pin M323.C43 directly from our Emmerich warehouse Technical Data SKU: M323.C43 GTIN: 4061905067075 Brand: Metav IndustryLine Label: PrüfÂstift, einzeln, 12,43 mm Länge 50 mm Facts Diameter: 12.43 mm Overall length: 50 mm Weight: 0.1 kg Dimensional tolerance: ±0.002 mm Special features Material: Special steel Workshop version construction Supplied in protective transport box for transport Single test pin for end‑measurement checks FAQ What is the declared tolerance of this gauge pin? The gauge pin M323.C43 is manufactured to a tolerance of ±0.002 mm, ensuring high repeatability for bore and fit checks. Is the material suitable for frequent inspection use? Yes, the test pin is made from special steel and the workshop version is designed for regular handling and repeated insertion cycles. Does the pin come with protective packaging? The item is supplied in a protective transport box to safeguard the measuring surface during storage and transport. Can this pin be used as a reference for go/no‑go assessments? The M323.C43 inspection pin is intended for end‑measurement and fit verification and is suitable as a fixed reference in quick go/no‑go checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12.44mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of repeatable accuracy and robust workshop construction in one compact inspection component: the combination of a 12.44 mm diameter, a 50 mm shaft and a fine ±0.002 mm tolerance supports reliable end‑of‑line checks and jig alignment. Order the inspection pin directly via Metav Werkzeuge or request tailored advice from our consultants. Test pin M323.C44 — gauge pin, Ø 12.44 mm, length 50 mm (Metav IndustryLine) A test pin designed for precise end‑measurements and fixture checks in workshop environments, supplied in a single‑piece format for straightforward insertion and repeatable positioning. Diameter 12.44 mm precision Length 50 mm workshop version Special steel construction Tolerance ±0.002 mm Engineered for repeatable precision The design focuses on consistent measurement results: a true 12.44 mm diameter combined with a fine ±0.002 mm dimensional tolerance reduces variability when used as a reference or locating element in inspection fixtures. For end‑measurements and basic gauge tasks this compact inspection component offers a clear technical benefit—less rework and fewer ambiguous readings. The robust dimensional control helps maintain process stability when multiple assemblies or checks are performed repeatedly. Robust material and workshop readiness Manufactured from special steel, the pin is intended for daily use in demanding workshop conditions where wear resistance and dimensional stability matter. The workshop version construction balances toughness with machinability, making this component suitable for locating, go/no‑go seating and alignment tasks within standard production jigs. The choice of steel minimises surface damage and supports prolonged service life under typical handling and installation stresses. Simple integration into inspection and fixturing With a 50 mm shaft length the component provides sufficient engagement depth for reliable seating in sockets and bores, while remaining compact enough for confined setups. This format supports straightforward use in end‑of‑line checks and small jig fixtures, enabling efficient measurement workflows without complex adaptations. Where traceable measurements are required, the pin’s nominal dimensions and tolerance facilitate transparent documentation of the inspection process. For precise workshop applications and reliable locating elements, contact Metav Werkzeuge in Emmerich for product availability and tailored recommendations — Metav IndustryLine components are distributed directly by Metav Werkzeuge. Technical Data Article number: M323.C44 GTIN: 4061905067082 Brand: Metav IndustryLine Facts Diameter: 12.44 mm Length: 50 mm Weight: 0.1 kg Tolerance: ±0.002 mm Special features Material: Special steel Version: Workshop design Application: End measurements Category: Gauge / test pin FAQ What material is the test pin made from? The test pin M323.C44 is made from special steel, chosen for durability and dimensional stability in workshop applications. What dimensional tolerance does the pin offer? This gauge pin is specified with a tolerance of ±0.002 mm, ensuring high repeatability for locating and end‑measurement tasks. Is the length suitable for jig and fixture seating? Yes, the 50 mm shaft provides practical engagement depth for secure seating in standard sockets and bores used in fixtures. Can this pin be used for end‑of‑line measurements? The component is designed for end measurements and reference positioning; its precision and construction suit routine inspection and alignment roles. Which catalogue identifier should be used for ordering? Refer to article number M323.C44 (GTIN 4061905067082) and the Metav IndustryLine designation when ordering. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com