LNMX 120408 T9125 Wendeplatten - Tungaloy
Reliable turning performance is achieved by combining Tungaloy's T9125 grade with a 0.8 mm corner radius and ISO LNMX120408 compatibility, resulting in stable cutting and longer service intervals. Order the insert directly via Metav Werkzeuge or consult our specialists for the optimal matching of grade and chipbreaker. LNMX120408 T9125 Turning Insert for Turning — Tungaloy A LNMX120408 T9125 indexable turning insert designed for ISO-compliant external and internal turning applications, offering a balanced mix of wear resistance and edge stability. Tungaloy grade T9125 for wear resistance 0.8 mm corner radius for robust performance ISO LNMX120408 for wide holder compatibility Rectangular 12 mm size, 4.76 mm thickness Stable cutting with reduced tool changes The insert is produced from carbide and specified as grade T9125, which combines wear resistance and toughness to support consistent cutting over extended cycles. This behaviour reduces unplanned tool changes and contributes to a predictable productivity profile on turning centres. The 0.8 mm corner radius offers a compromise between edge strength and surface finish, making it suitable where moderate robustness and good workpiece quality are required. The design supports routine industrial turning tasks while maintaining process stability. Seamless integration into ISO systems Compatibility follows ISO conventions: the insert's LNMX120408 designation and rectangular form ensure it fits a broad range of ISO LNMX holders when the form, relief angle, tolerance class, fastening method, size and thickness match. The plate thickness of 4.76 mm and the nominal plate size of 12 mm are key dimensions for selecting the correct clamping components. The relief angle is 0°, and the included angle measures 90°, so verification of holder geometry is essential before installation. Where a special hole or hole style is specified, confirm holder and screw variant compatibility to assure secure clamping. Application advantages for external and internal turning Designed expressly for turning, the insert performs well in both external and internal operations when paired with a suitable chipbreaker and toolholder. The combination of the Tungaloy grade and the insert geometry promotes reliable chip control, helping to avoid re-cutting or entanglement in many turning scenarios. Selecting a chipbreaker and grade that match the workpiece material and machining stability is crucial: the right pairing delivers improved surface finish and repeatable cycle times, especially in production environments prioritising throughput and component consistency. Selection guidance and catalogue reference When choosing this insert, prioritise the interaction of grade, chipbreaker and tool stability rather than a single parameter. The LNMX120408 T9125 insert suits operations where a balanced edge life and resistance to wear are needed; for heavier interrupted cuts or very abrasive materials, evaluate alternative grades or geometry. For ordering and precise specification, refer to SKU TUN6861600 and the manufacturer article number 6861600 to ensure the correct item. Technical consultation is available to match holder types and fastening systems for a trouble-free integration. For precision turning with Tungaloy's T9125 grade, contact Metav Werkzeuge for expert selection and fast availability: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6861600 Manufacturer SKU: TUN6861600 SKU: 6861600-Tungaloy Model series: ISO-Drehwendeschneidplatten Name: LNMX120408 T9125 Tungaloy insert Dimensions & angles Corner radius: 0.8 mm Plate size: 12 mm Plate thickness: 4.76 mm Relief angle: 0° Included angle: 90° Features & compatibility Carbide material Tungaloy grade T9125 Rectangular plate form Special hole and hole style Chipbreaker: special Intended use: external and internal turning ISO LNMX120408 compatibility FAQ What distinguishes the T9125 grade from other grades? The T9125 grade from Tungaloy emphasises a balance of wear resistance and toughness, providing stable edge life for a wide range of turning tasks; the LNMX120408 T9125 insert benefits from this balance for consistent performance. Which machining operations are suitable for this insert? This indexable insert is intended for turning, including both external and internal operations, where a medium corner radius and balanced grade deliver reliable performance. How is holder compatibility determined for this insert? Holder compatibility depends on form, relief angle, tolerance class, fastening method, size and thickness; the ISO LNMX120408 designation is a primary guide to selecting the correct holder and clamping set. What are the key dimensions to check before ordering? Check the plate size (12 mm), thickness (4.76 mm), corner radius (0.8 mm) and relief angle (0°) to ensure the toolholder and clamping hardware match the LNMX120408 insert. Can the LNMX120408 T9125 be used for heavy interrupted cuts? The LNMX120408 T9125 insert is optimised for balanced wear and edge stability; for heavy interrupted cuts, consider assessing toolholder rigidity, machining parameters and possibly a grade or geometry with greater toughness. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
LNMX 120408 T9125 Wendeplatten - Tungaloy
Benefit from the proven combination of ISO-standard geometry, the T9125 wear-resistant grade and a robust carbide body for steady, repeatable turning performance; order the insert through Metav Werkzeuge or consult our specialists for application support. LNMX120408 T9125 – ISO turning insert, rectangular form, 90° cutting angle, Tungaloy The LNMX120408 T9125 is an ISO-standard rectangular indexable insert intended for external and internal turning, engineered to deliver stable cutting edge performance and consistent wear resistance in general turning applications. LNMX120408 ISO geometry, 90° cutting angle Tungaloy grade T9125 for wear resistance Carbide substrate, suitable for turning 0.8 mm corner radius, 4.76 mm thickness Consistent cutting performance through optimised grade and substrate The insert combines a carbide substrate with the T9125 Tungaloy grade to balance wear resistance and toughness for everyday turning tasks. This composition supports sustained cutting-edge integrity in interrupted and continuous cuts, reducing the frequency of index changes and enhancing process stability. By selecting a grade developed for turning, operators gain a predictable tool life and uniform surface finish without needing complex parameter adjustments. Easy integration with ISO toolholders and predictable mounting The ISO designation and rectangular form factor mean the insert fits a wide range of standard holders when form, clearance, tolerance class, attachment and thickness match. The 90° approach lends itself to versatile external and internal operations where axial and radial positioning matter. The insert thickness of 4.76 mm and the 0.8 mm corner radius ensure secure clamping and defined engagement geometry, helping maintain repeatable part dimensions and minimising set-up variance across batches. Practical benefits for machining quality and shop efficiency Choosing an insert with a stable cutting edge and balanced substrate results in fewer process interruptions and a more predictable finishing requirement. The combination of ISO geometry and a robust carbide body supports consistent chip formation and surface quality, which is especially beneficial in mixed-production environments. Reduced rework and consistent cycle times contribute to a measurable uplift in operational efficiency and part conformity. Guidance on selecting the right chipbreaker and application fit The insert is supplied in a standard geometry; chipbreaker and specific grade match should be selected according to the material, machining style and machine stability. For general turning, opt for a chip control and insert variant that complements the machine rigidity and feed range. Compatibility is determined by the holder form, clearance angle and tolerance class, so ensure the chosen holder matches the ISO LNMX footprint for safe and effective operation. For tailored application advice or to order the LNMX120408 T9125 insert from Metav Werkzeuge, contact our technical team at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss holder compatibility and optimal grade selection. Technical data Article number: 6861551 Manufacturer SKU: TUN6861551 SKU: 6861551-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: LNMX120408 Manufacturer: Tungaloy Facts Corner radius: 0.8 mm Plate thickness: 4.76 mm Plate size: 12 mm Clearance angle: 0° Approach/lead angle: 90° Material: Carbide Special features Grade: T9125 (Tungaloy) Plate form: Rectangular Hole style: Special Chipbreaker: Special Typical application: Turning (external and internal) Compatibility notes: Determined by form, clearance, tolerance class, attachment, size and thickness FAQ What materials is this insert suited for? The LNMX120408 T9125 insert, with its carbide substrate and T9125 grade, is intended for general turning; selection of chipbreaker and grade should match the specific workpiece material and machining condition. How does the 0.8 mm corner radius affect performance? A corner radius of 0.8 mm increases edge strength and workpiece finish stability; it balances cutting forces and is suitable for general turning where a compromise between edge robustness and surface finish is required. Which holders are compatible with this ISO insert? Compatibility depends on matching the LNMX form, clearance angle, tolerance class, attachment method, size and thickness; ensure the holder is specified for LNMX120408 inserts and secure clamping of the 4.76 mm thick plate. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
LNMX 120412 T9115 Wendeplatten - Tungaloy
The combination of Tungaloy's T9115 carbide grade for enhanced wear resistance, ISO‑standard geometry for reliable holder compatibility and a 1.2 mm corner radius for robust edge engagement ensures stable, productive turning operations. Order the LNMX120412 T9115 insert directly via Metav Werkzeuge or consult our specialists for application advice. LNMX120412 T9115 — ISO indexable turning insert, 1.2 mm corner radius, Tungaloy The LNMX120412 T9115 is an ISO‑standard indexable turning insert engineered for external and internal turning, providing a 1.2 mm corner radius and a 0° clearance angle for secure, repeatable cutting performance ISO‑standard geometry for holder compatibility Tungaloy T9115 grade for wear resistance 1.2 mm corner radius for robust engagement Rectangular plate, 4.76 mm thickness Consistent cutting performance through tailored material and geometry The LNMX120412 combines ISO‑standard form and a Tungaloy carbide grade to deliver predictable tool life and steadier process control in turning operations. The T9115 grade balances wear resistance and toughness, reducing the frequency of insert changes and downtime. With an indexable insert design and a defined corner radius, the insert supports stable cutting forces and improved surface quality, translating directly into higher productivity on batch and serial turning tasks. Improved edge stability and chip behaviour for reliable finishing A 1.2 mm corner radius provides a compromise between edge strength and fine finishing capability: it resists chipping under interrupted cuts while still enabling acceptable surface finishes on semi‑finishing passes. The insert’s geometry, in combination with the grade’s mechanical properties, promotes controlled chip formation and reduced edge degradation. Because the grade is tailored to turning applications, tool life is extended under typical feed and speed ranges, making the component suitable for mixed workshop workloads where repeatable results matter. Clear mounting compatibility and standardised fit for fast tool changes Compatibility with toolholders is defined by the insert’s shape, clearance angle, tolerance class, clamping method, size and thickness. The rectangular form and 0° clearance angle ensure a consistent seating in holders designed for ISO turning plates; tolerance conformity simplifies interchangeability and reduces set‑up time. When selecting holders and clamping hardware, match the plate dimensions and thickness to the toolholder’s specifications to secure the insert correctly and maintain the intended cutting geometry. Practical selection advice to boost process reliability Choose the required chipbreaker style and grade depending on workpiece material and the machining objective: aggressive chip control for continuous turning, or moderate chip formers for mixed or interrupted cuts. The LNMX120412’s construction suits a range of steels and common alloys; pairing the plate with a stable, rigid setup and correct cutting parameters yields measurable improvements in cycle consistency and component finish. For specific material recommendations or optimisation of feed and speed settings, the technical consultants at Metav Werkzeuge provide application‑oriented guidance. For reliable, productive turning with Tungaloy expertise, contact Metav Werkzeuge for tailored advice and order support via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6861497 SKU: 6861497-Tungaloy Manufacturer SKU: TUN6861497 Model series: ISO‑Drehwendeschneidplatten Material: Hartmetall (carbide) Grade: T9115 Core specifications Corner radius: 1.2 mm Plate thickness: 4.76 mm Plate size: 12 mm Included angle: 90° Clearance angle: 0° Design & features Plate form: rectangular Hole: special Hole style: special Chipbreaker: special Intended application: turning ISO designation: LNMX120412 Manufacturer: Tungaloy FAQ What workpieces is this insert suited for? The LNMX120412 T9115 indexable turning insert is designed for general turning tasks; its T9115 carbide grade offers a balance of wear resistance and toughness suitable for a wide range of steels and common alloys. How does the 1.2 mm corner radius affect machining? A 1.2 mm corner radius increases edge stability and reduces chipping risk during interrupted cuts, while still permitting acceptable surface finishes for semi‑finishing and general turning operations. Is the insert compatible with standard ISO holders? Yes. The ISO‑standard geometry of the LNMX120412 ensures compatibility with holders that match the plate’s form, thickness and tolerance class; correct clamping and matching dimensions are essential for secure seating. What does the T9115 designation mean for tool life? The T9115 grade from Tungaloy emphasises wear resistance with sufficient toughness, which generally extends insert life under typical turning conditions and helps maintain consistent cutting performance. Can the insert be used for internal turning as well as external turning? Yes. The LNMX120412 is suitable for both external and internal turning applications where the insert geometry and holder arrangement permit proper chip flow and clearance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
LNMX 120412 T9115 Wendeplatten - Tungaloy
Take advantage of the Tungaloy T9115 grade and the precise LNMX120412 geometry for wear-resistant, repeatable turning operations. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. LNMX120412 T9115 indexable turning insert for turning — Tungaloy LNMX120412 T9115 is an ISO-format indexable insert designed for external and internal turning applications, offering a balanced combination of wear resistance and edge stability in a rectangular form. LNMX120412 geometry for ISO turning Tungaloy T9115 grade for wear resistance 1.2 mm corner radius for versatile profiles 0° clearance angle with 4.76 mm thickness Consistent fit and predictable cutting behaviour for ISO holders The LNMX120412 follows ISO-standard dimensions, which means compatibility with matching holders is determined by form, clearance angle, tolerance class, clamping method, size and thickness. This standardisation reduces setup variability and simplifies tool inventory management: one insert geometry integrates into established holder systems when those parameters match. The rectangular plate and the 4.76 mm plate thickness provide a stable mount, while the 0° clearance angle contributes to controlled chip flow in many turning setups. For production environments that value reproducible results, the standardised interface translates into less rework and improved first-pass yield. Durable cutting performance from the Tungaloy T9115 grade The cutting grade T9115, developed by Tungaloy, pairs a wear-resistant carbide substrate with a composition tuned for a balance of toughness and edge retention. This combination helps to extend insert life under mixed machining conditions and maintains cutting-edge stability during interrupted cuts or when facing variable workpiece rigidity. The result is fewer insert changes, more consistent surface finish and predictable tool-change intervals. For shops aiming for efficient material removal with low downtime, the grade supports productive turning of a broad range of steels and general workshop materials. Practical setup guidance and recommended system components For reliable turning results, assemble the machining system from the indexable insert, a matching external holder or boring bar, a shim/clamping set and replacement screws as required; compatibility is assured when holder form and tolerance class correspond to the insert. The 1.2 mm corner radius produces a good compromise between edge strength and profile detail, suitable for general finishing and light roughing. Select a chipbreaker and the T9115 grade to match the workpiece material and machining stability. If there is any uncertainty about suitability for a specific component or cycle, Metav Werkzeuge offers application advice and technical documentation by e-mail or phone to support the selection process (info@metav-werkzeuge.com, +49 2822 7131930). Discuss application requirements with Metav Werkzeuge to ensure the LNMX120412 T9115 insert delivers the expected productivity and consistency in turning operations Technical data Article number: 6861517 Manufacturer SKU: TUN6861517 SKU: 6861517-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: LNMX120412 Facts Corner radius: 1.2 mm Plate thickness: 4.76 mm Plate size: 12 mm Angle: 90° Clearance angle: 0° Special features Material: carbide Grade/coating: T9115 Shape: rectangular Chipbreaker: special Hole style: special Typical application: turning System components: insert, holder/boring bar, shim/clamping set, replacement screws Compatibility criteria: form, clearance angle, tolerance class, clamping, size, thickness FAQ What holder features determine compatibility with this insert? The insert is compatible when holder form, clearance angle, tolerance class, clamping method, size and thickness match the LNMX120412 specifications. Which materials is the T9115 grade best suited for? The T9115 grade is formulated for versatile turning tasks, offering a balance of wear resistance and toughness suitable for a wide range of steels and common workshop materials. How does the 1.2 mm corner radius affect finishing and roughing? A 1.2 mm corner radius provides enhanced edge strength for machining stability while still allowing for controlled finishing; it is a practical compromise for mixed operations. What components are needed to set up a complete turning system with this insert? A complete system comprises the indexable insert, a matching external holder or boring bar, a shim or clamping set and the appropriate replacement screws for secure fastening. Is this insert suitable for internal turning as well as external turning? Yes, the ISO-format geometry and rectangular form enable use in both external and internal turning applications when the chosen holder supports the insert dimensions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
LNMX 120412 T9125 Wendeplatten - Tungaloy
Benefit from the combination of ISO compliance, the T9125 carbide grade and a 1.2 mm corner radius for reliable, repeatable turning operations; order directly via Metav Werkzeuge or contact our consultants for application advice. LNMX 120412 T9125 turning indexable insert — Tungaloy (1.2 mm radius, 90°) LNMX 120412 T9125 is an ISO-standard turning indexable insert designed for both external and internal turning operations, offering a balance of wear resistance and edge stability for a wide range of machining tasks ISO-standard turning insert Tungaloy T9125 grade for wear resistance 1.2 mm corner radius for versatility Rectangular 12 mm size, 90° included angle Consistent geometry for predictable results The LNMX 120412 T9125 insert is manufactured to ISO-standard dimensions, which ensures consistent fit and repeatability when paired with compatible holders. The insert’s geometry—defined form, 0° free clearance, tolerance class, fixing style, size and thickness—determines compatibility with a given toolholder. This predictability translates directly into shorter setup times and fewer machine interruptions, as the insert can be exchanged or re-indexed without unexpected changes to cutting position. The ISO conformity also simplifies inventory management for production environments that use standardised tooling. Robust cutting performance from the T9125 grade Built on a carbide substrate and specified in the T9125 grade, the cutting edge offers an engineered compromise between hardness and toughness. This composition supports stable cutting edges under cyclic loads and moderates abrasive wear during continuous turning. In practical terms, the material selection reduces the frequency of tool changeovers and maintains surface finish quality over longer tool life. When combined with an appropriate chipbreaker, the grade delivers reliable performance across a range of turning tasks, from light finishing cuts to more demanding passes where edge stability is essential. Geometry tuned for external and internal turning The insert’s 1.2 mm corner radius and 90° included angle provide versatility across typical turning applications. The rectangular 12 mm plate with 4.76 mm thickness offers rigidity in the clamping interface, which helps resist vibration and deflection during interrupted cuts or when using overhangs. The rectangular form is especially suitable for stable external turning and can be adapted for internal work with the correct boring bar. Choosing the right chipbreaker and matching the insert to a rigid holder will exploit these geometric strengths, giving improved surface finish and dimensional control. System approach that reduces downtime This insert is intended as part of a complete system: the indexable insert, a suitable external holder or boring bar, a shim or clamp set and replacement screws. Keeping spare mounting screws and shims in stock reduces downtime during scheduled changes. The standardised form factor allows straightforward replacement and re-indexing, while the insert’s robustness cuts service frequency. For production shops seeking efficient changeover routines, the combination of ISO compatibility and the T9125 material strategy supports fast, reliable maintenance intervals and predictable process planning. For precision turning with the Tungaloy T9125 grade, contact Metav Werkzeuge for tailored advice and rapid supply — eMail: info@metav-werkzeuge.com or telephone +49 2822 7131930 Technical data Article number: 6861498 SKU: 6861498-Tungaloy Manufacturer SKU: TUN6861498 Model series: ISO turning indexable inserts Designation: LNMX120412 Core specifications Corner radius: 1.2 mm Included angle: 90° Free clearance angle: 0° Plate thickness: 4.76 mm Plate size: 12 mm Special features Material: carbide Grade: T9125 (Tungaloy) Plate shape: rectangular Hole: special Hole style: special Chipbreaker: special Compatible with ISO toolholders System components: insert, holder/boring bar, shim/clamp set, spare screws FAQ What are the primary applications for this insert? The LNMX 120412 T9125 indexable insert from Tungaloy is designed for external and internal turning; it is suitable when a balance of wear resistance and edge stability is required. How can compatibility with existing holders be verified? Compatibility is determined by the insert’s form, free clearance angle, tolerance class, fixing method, size and thickness; check these parameters against the toolholder specifications before fitting the LNMX 120412. Is this insert suitable for internal turning and boring bars? Yes — the geometry and rectangular form make the insert adaptable for internal turning when paired with an appropriate boring bar and a rigid mounting arrangement. What advantages does the T9125 grade provide? The T9125 grade offers a balanced combination of wear resistance and toughness, which extends cutting edge life and maintains surface finish under varied turning conditions. What is delivered with the insert, and are mounting parts included? The listing covers the indexable insert itself (Article number 6861498); holders, shims and mounting screws are part of the overall system and should be ordered separately if not already in inventory. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
LNMX 120412 T9125 Wendeplatten - Tungaloy
Take advantage of the combination of T9125 cutting-grade durability, 90° geometry and a 1.2 mm corner radius for reliable, repeatable turning performance; order the insert directly via Metav Werkzeuge or consult our technical advisors for application support. LNMX 120412 T9125 indexable turning insert — Turning, Tungaloy A LNMX120412 T9125 indexable insert engineered for external and internal turning, offering a robust 90° cutting geometry and a versatile corner radius for general-purpose and moderate interrupted turning operations ISO rectangular insert Tungaloy carbide grade T9125 90° cutting geometry for robustness 1.2 mm corner radius versatility Consistent wear behaviour with a high-performance grade The Tungaloy T9125 grade combines wear resistance and toughness to deliver a stable cutting edge across mixed materials. Manufactured in carbide, the grade is formulated to resist abrasive wear while maintaining edge integrity under varying cut conditions, which translates into longer actual service life and fewer insert changes. For plants aiming to reduce tool changeover time and maintain consistent component quality, this grade offers a measurable improvement in process reliability. The insert’s material and grade selection favour predictable tool life and repeatable surface finishes, supporting efficient production planning and cost-effective machining. Secure seating and defined geometry for reproducible results Compatibility with the toolholder depends on form, relief angle, tolerance class, fastening, size and thickness; this product is an ISO standard rectangular insert with 90° geometry and a thickness of 4.76 mm, so correct holder selection ensures a secure fit and stable cutting conditions. The specified 1.2 mm corner radius balances edge strength and finishing capability: a larger radius increases robustness for heavier cuts, while still allowing acceptable surface quality. The insert features a special-hole style and a dedicated chipbreaker; when paired with the correct clamping set and screws, the system achieves repeatable concentricity and minimal vibration, reducing the risk of premature edge failure. Practical workshop advantages and straightforward system integration Designed for turning operations, the insert suits both external and internal turning when combined with the appropriate outside holder or boring bar. The rectangular form and the special chipbreaker make it adaptable to a wide range of routine and semi‑roughing tasks. In practice, selecting the right chipbreaker and matching feed and speed to the carbide grade yields lower cycle times and consistent surface finishes — a clear rational advantage for batch production. System setup typically includes the insert, a compatible holder or boring bar, a backing/clamping kit and replacement screws; this modular approach simplifies stock management and speeds maintenance procedures. For teams new to indexable tooling, the defined geometry and robust grade make setup more forgiving and improve first‑pass yields. For reliable results with Tungaloy’s T9125 grade, contact Metav Werkzeuge for tailored advice and rapid supply — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6861532 SKU: 6861532-Tungaloy Manufacturer SKU: TUN6861532 Model series: ISO turning inserts Material: carbide Application: turning Facts Corner radius: 1.2 mm Relief angle: 0° Cutting angle: 90° Thickness: 4.76 mm Plate size: 12 mm Special features Grade: T9125 (Tungaloy) Rectangular ISO insert Special hole and hole style Special chipbreaker Suitable for external and internal turning System components: holder, clamping set, replacement screws FAQ What materials is this insert suitable for? The Tungaloy grade T9125 insert is designed for general turning tasks and provides balanced wear resistance and toughness; it performs well on a variety of steels and mixed material batches when the cutting data is adjusted accordingly. How does the 1.2 mm corner radius affect machining? A 1.2 mm corner radius increases edge strength and improves resistance to chipping during interrupted cuts while still enabling acceptable surface finishes in semi‑finishing operations. Which holder features must be checked for compatibility? Holder compatibility depends on form, relief angle, tolerance class, fastening method, insert size and thickness; matching these parameters to the rectangular ISO insert ensures secure clamping and predictable results. Is the insert appropriate for internal turning (boring)? Yes — when mounted in a compatible boring bar or internal holder and paired with suitable cutting data, the insert can be used for internal turning as well as external operations. What system components are recommended for reliable use? A matched outside holder or boring bar, a backing/clamping kit and the specified replacement screws complete the system and help maintain concentricity and cutting stability. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
LNMX 160608 AH725 Wendeplatten - Tungaloy
Combine the PVD-coated AH725 grade with the ISO LNMX160608 format to secure consistent turning performance and process reliability; order directly via Metav Werkzeuge or request tailored advice from our consultants. LNMX 160608 AH725 turning insert (ISO) – PVD-coated cemented carbide, 0.8 mm radius | Tungaloy LNMX 160608 AH725 is an ISO-format indexable insert for external and internal turning, designed as a universal, fracture-resistant grade for steel and stainless steels. PVD-coated carbide AH725 Universal for steel and stainless steels ISO LNMX160608 format 0° clearance, 90° included angle Reliable cutting performance for everyday turning The PVD-coated AH725 grade is formulated as a universal, crack-resistant solution that balances wear resistance and edge stability for a wide range of steels and rust-free steels. As a cemented carbide insert with a 0.8 mm corner radius, it delivers predictable tool life and consistent component quality in batch and single-piece production. The coating reduces built-up edge and extends interval times between index changes, which supports a steady production flow and lowers overall process cost. Clear compatibility and simple system integration Compatibility with holders is governed by geometric and mechanical parameters such as form, clearance angle, tolerance class, fixing method, size and thickness. The LNMX160608 format follows ISO conventions and fits appropriate LNMX-capable holders when the 6.35 mm plate thickness and 16 mm seat dimension are matched. Specifying the correct holder/profile and checking the special hole and mounting style avoids fitment issues and ensures stable clamping, which in turn improves repeatability and surface finish. Choose the right chip control and enhance process security The insert features a special chipbreaker designation suitable for turned components where chip form and evacuation are critical. Selecting the chipbreaker and grade to match material, cutting data and machine stability reduces the risk of interruptions and workpiece damage. For operations with varying materials or shorter tools, the universal AH725 grade provides robust performance and improved process security, especially under changing cutting conditions where a dependable edge is required. Practical system concept and maintenance advantages This ISO insert is part of a system comprising the indexable plate, compatible external holder or boring bar, seating shim or clamp kit and spare screws. Clear documentation of the system components and straightforward replacement of worn inserts keep machine downtime to a minimum. The combination of standardised geometry and a durable coating simplifies inventory management while maintaining the quality and repeatability necessary for precision turning tasks. For stable, repeatable turning results with Tungaloy AH725 inserts, contact Metav Werkzeuge for availability, holder matching and application advice via info@metav-werkzeuge.com or call +49 2822 7131930 — our technical team will assist with specification and delivery. Technical data Article number: 6861536 Manufacturer SKU: TUN6861536 SKU: 6861536-Tungaloy Model series: ISO turning inserts Format: LNMX160608 Core data Corner radius: 0.8 mm Thickness: 6.35 mm Size: 16 mm Included angle: 90° Clearance angle: 0° Special features Material: cemented carbide Grade/coating: PVD-coated AH725 Suitability: steel and rust-free steels Plate shape: rectangular Hole type: special Hole style: special Chipbreaker: special Application: turning (external and internal) System components: insert, holder/boring bar, shim/clamp set, replacement screws FAQ Which materials are suitable for this insert? The LNMX160608 AH725 insert is designed as a universal grade primarily for steel and rust-free steels, offering reliable performance across varying alloys. What is the corner radius and why is it important? This insert has a 0.8 mm corner radius, which helps balance edge strength and finish: a larger radius improves robustness while still allowing acceptable surface quality on turned parts. Will this insert fit existing LNMX holders? Compatibility depends on holder form, clearance angle, tolerance class, fixing method, plate size and thickness; the ISO-format LNMX160608 matches LNMX-capable holders when those parameters align. How does the AH725 grade affect chip control? The PVD-coated AH725 grade combines a fracture-resistant substrate with coating benefits to reduce built-up edge; matched with the appropriate chipbreaker, it delivers consistent chip form and evacuation for stable machining. Is the insert suitable for internal and external turning? Yes, the insert is applicable to both external and internal turning when used with the correct holder geometry and machining parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
LNMX 160608 AH725 Wendeplatten - Tungaloy
Take advantage of PVD‑coated cemented carbide in a universal, fracture‑resistant grade and precise ISO dimensions for stable turning performance; the combination of AH725 wear resistance and an exact 0° clearance enables secure machining across varying steels. Order the LNMX160608 AH725 turning insert directly via Metav Werkzeuge or ask our consultants if needed. LNMX 160608 AH725 turning insert (ISO LNMX160608) by Tungaloy — for turning applications A high‑security, universal ISO turning insert in grade AH725, designed for external and internal turning where fracture resistance and consistent process stability are required PVD-coated cemented carbide AH725 Universal, fracture-resistant grade for steels ISO LNMX160608 form, rectangular 16 mm size 0° clearance angle for controlled cutting Maximise process security with a universal, fracture‑resistant grade The PVD‑coated AH725 grade delivers a balanced mix of wear resistance and edge toughness, making it suitable for mixed batches and variable component materials. As a cemented carbide insert with a robust coating, it reduces flank wear and maintains cutting‑edge geometry over longer tool life, which in turn supports predictable cycle times and reduced scrap rates. This reliability is particularly valuable in environments with frequent material changes or where smaller tool sizes demand a resilient cutting edge. Precise ISO form and dimensions for straightforward integration Supplied in the ISO LNMX160608 form, the insert follows standardised contours and tolerances so compatibility depends only on matching holder geometry, clearance and thickness. The rectangular 16 mm size and 6.35 mm thickness pair with the specified 0° clearance, enabling straightforward selection of a suitable external holder or boring bar. Clear specification of these parameters streamlines tool planning and reduces setup time on the shop floor. Designed for productive turning with minimal disruption The grade’s out‑break resistance and consistent cutting behaviour help to avoid unexpected edge failures, supporting continuous operation and higher overall equipment effectiveness. When used as part of a complete system — insert, matching holder, supporting shim and correct clamping hardware — the component contributes to faster tool changes and reliable batch runs. The modest corner radius further aids controlled chip formation and predictable surface finish in many turning tasks. What PVD‑coating and carbide mean in practice A PVD coating forms a thin, hard layer on the cemented carbide substrate to improve abrasive wear resistance and reduce built‑up edge. In everyday terms, this means longer intervals between indexings and a steadier surface quality across a shift. The AH725 designation identifies the material and coating combination as a universal, fracture‑resistant option optimised for steel and stainless steels, offering a pragmatic compromise between durability and toughness for general turning. For application advice, availability and to secure LNMX160608 AH725 turning inserts from Tungaloy, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants will recommend the correct holder and clamping set for the intended turning task Technical Data Article number: 6861566 Manufacturer SKU: TUN6861566 Internal SKU: 6861566-Tungaloy Model series: ISO‑Drehwendeschneidplatten Material: Hartmetall Grade/coating: AH725 (PVD‑coated) Facts ISO designation: LNMX160608 Size: 16 mm Thickness: 6.35 mm Corner radius: 0.8 mm Clearance angle: 0° Entry/approach angle: 90° Special features Rectangular plate form Special hole / special hole style Special chipbreaker Universal, fracture‑resistant grade for steel and stainless steels Intended application: turning System components: insert, compatible external holder or boring bar, shim/clamping set and replacement screws FAQ Is this insert suitable for stainless steels? Yes. The AH725 grade is formulated as a universal, fracture‑resistant option and the LNMX160608 insert is suitable for machining steel and stainless steels when appropriate cutting data is applied. What does the 0° clearance mean for holder selection? A 0° clearance requires a holder that provides the intended clearance geometry; compatibility is determined by holder form, free angle, tolerance class, fastening method, size and thickness. How does the PVD coating benefit production use? The PVD coating improves abrasive wear resistance and helps maintain edge integrity, resulting in longer indexed life and more consistent surface finishes during runs. Can the insert be used for both external and internal turning? Yes. The ISO form and rectangular shape enable use in external turning and, with the correct boring bar and setup, internal turning where the geometry matches. What system parts are required besides the insert? A matching external holder or boring bar, appropriate shim or clamping set and the correct replacement screws are required to build a complete tool system for safe operation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
LNMX 160608 T9115 Wendeplatten - Tungaloy
Take advantage of the combination of Tungaloy T9115 grade durability, a 0.8 mm nose radius for versatile finishing, and ISO conformity for seamless integration in production; order the insert directly via Metav Werkzeuge or consult our technical team for application-specific guidance. LNMX160608 T9115 — ISO turning insert (indexable carbide insert) by Tungaloy The LNMX160608 T9115 is an ISO‑standard indexable carbide insert engineered for external and internal turning, offering a balance of wear resistance and cutting‑edge stability for general turning tasks. ISO‑standard turning geometry Tungaloy T9115 grade for wear resistance 0.8 mm nose radius for versatile finishing 16 x 6.35 mm rectangular insert form Increased process efficiency through robust grade and edge stability The combination of the T9115 grade and a carbide substrate delivers improved wear resistance and sustained edge life under typical turning conditions, which in turn supports longer uninterrupted runs and fewer tool changes. For process planners, this means a more predictable cycle time and reduced downtime. The insert’s engineered balance between toughness and hardness helps maintain part quality over extended tool life, contributing to stable productivity and consistent surface finish. Seamless integration with ISO holders and practical handling advantages Designed to the ISO geometry family, compatibility with a holder is determined by form, relief angle, tolerance class, clamping method, size and thickness. Key dimensions such as 16 mm width, 6.35 mm thickness and 90° included angle enable straightforward selection of matching external holders or boring bars. The 0° relief angle and 0.8 mm nose radius provide a versatile profile for a range of cutting depths and feed rates, while the special hole and chipbreaker variants offer adaptation to clamping systems and process requirements. Application guidance for reliable turning performance Suitable for both external and internal turning when paired with the correct holder and cutting data, the insert benefits from selecting a chipbreaker and sort to match workpiece material, machining strategy and machine stability. The system concept comprises the ISO insert, an appropriate external holder or boring bar, a shim/clamp set and spare screws to ensure secure fixation and repeatability. For technical clarification or to confirm suitability for a specific machining task, the technical team can provide cutting parameter recommendations and supply options via email or phone. Contact Metav Werkzeuge for tailored advice on integrating the Tungaloy LNMX160608 insert into production and to arrange reliable delivery and stock support via info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 6861552 Manufacturer SKU: TUN6861552 Material: Carbide Grade/coating: T9115 (Tungaloy) ISO designation: LNMX160608 Application: Turning Facts Nose radius: 0.8 mm Relief angle: 0° Thickness: 6.35 mm Size: 16 mm Included angle: 90° Special features Rectangular insert shape Special hole and hole style Special chipbreaker variant Compatible with ISO external holders and boring bars System components: insert, holder/boring bar, shim/clamp set, spare screws FAQ What operations is this insert designed for? The LNMX160608 T9115 insert is intended for external and internal turning operations and is optimised for general turning tasks when matched with a suitable holder. What benefits does the T9115 grade provide? The Tungaloy T9115 grade combines wear resistance and cutting‑edge stability to extend tool life and improve consistency of surface finish under typical turning conditions. Which holder characteristics determine compatibility? Compatibility depends on insert form, relief angle, tolerance class, clamping method, size and thickness; these factors define the matching external holder or boring bar for proper fixation. What are the key dimensions to note when selecting a holder? Important dimensions include a 16 mm width, 6.35 mm thickness, a 90° included angle and a 0.8 mm nose radius, which guide holder selection and cutting parameter planning. What does the delivery system include for mounting? The system approach covers the ISO insert plus the matching external holder or boring bar, a shim/clamp set and replacement screws to ensure repeatable, secure clamping of the insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
LNMX 160608 T9115 Wendeplatten - Tungaloy
Taking advantage of Tungaloy's wear‑resistant T9115 carbide and the ISO‑conforming rectangular geometry ensures consistent chip control, long tool life and stable cutting performance in turning operations; order original inserts directly via Metav Werkzeuge or consult the technical team for process adaptation. LNMX 160608 T9115 – LNMX turning insert by Tungaloy A LNMX160608 T9115 indexable insert for ISO‑conforming external and internal turning, designed for stable chip formation and reliable edge life. ISO‑normalised turning insert, rectangular form Tungaloy T9115 carbide grade, wear‑resistant 0.8 mm corner radius for versatile profiles 6.35 mm plate thickness, stable cutting edge High endurance through optimised carbide grade The insert uses a dedicated T9115 carbide grade, selected to balance wear resistance and edge toughness for continuous turning. This combination reduces the need for frequent insert changes and supports long production runs with consistent part quality. The hardened substrate and the grade formulation promote stable chip formation, which helps to maintain surface finish and reduces process variability in serial machining. Precise system fit and secure clamping for repeatable results As an ISO‑conforming rectangular insert, compatibility with the toolholder is governed by the insert shape, clearance angle (0°), tolerance class, fixing method, size and thickness. Correct selection of holder and clamp ensures repeatable seating and concentricity, which in turn supports dimensional accuracy and tool life. The design allows straightforward integration into standard external and internal turning tool systems, while the 6.35 mm plate thickness contributes to improved rigidity under interrupted cuts. Practical application advice for productivity and surface quality With a 0.8 mm corner radius, this grade suits a wide range of turning tasks where a balance between edge strength and profile detail is required. For finishes or heavy roughing, select an appropriate chipbreaker and match the insert grade to the workpiece material and machine stability; the insert excels in stable turning setups and when chip control is essential. The rectangular geometry and reinforced cutting edge support predictable flank wear, reducing downtime and supporting higher first‑pass yields in production environments. For application‑specific recommendations or to secure original Tungaloy inserts, contact Metav Werkzeuge for expert advice and rapid delivery: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: 6861586 Manufacturer SKU: TUN6861586 SKU: 6861586-Tungaloy Name: LNMX160608 T9115 Tungaloy insert Manufacturer: Tungaloy Material: carbide Key dimensions Plate size: 16 mm Plate thickness: 6.35 mm Corner radius: 0.8 mm Clearance angle: 0° Included angle: 90° Hole: Special Features Model series: ISO turning inserts Plate form: rectangular Grade: T9115 (Tungaloy) Intended use: turning Chipbreaker: Special Compatibility factors: shape, clearance angle, tolerance class, fixing, size, thickness FAQ What turning operations is this insert suited for? This indexable insert is intended for external and internal turning; the LNMX160608 T9115 excels where stable chip control and consistent edge life are required. What is the corner radius and how does it affect the cut? The corner radius is 0.8 mm; this radius provides a compromise between edge strength and the ability to produce defined profiles, helping to improve surface finish in many turning tasks. How is holder compatibility determined for this insert? Compatibility depends on insert form, clearance angle (0°), tolerance class, fixing method, plate size and thickness; ensuring these match the holder secures repeatable positioning and accurate results. Is this an original Tungaloy product? The offering is an original Tungaloy indexable insert delivered as a new product from the manufacturer. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
LNMX 160608 T9115 Wendeplatten - Tungaloy
Benefit from a robust combination of ISO conformity and Tungaloy’s T9115 grade that delivers wear resistance and edge stability for productive turning operations; compatibility is ensured by matching form, clearance angle and plate thickness to the chosen holder. Order the LNMX160608 insert directly via Metav Werkzeuge or consult our advisors for application-specific guidance. LNMX160608 T9115 – ISO indexable turning insert, 90° rectangular form by Tungaloy LNMX160608 T9115 is an ISO-standard indexable insert for turning, engineered to pair with suitable external holders and boring bars for stable chip formation and repeatable performance ISO 160608 geometry, 90° and rectangular form Tungaloy T9115 grade for wear resistance 0.8 mm corner radius for robust edge 6.35 mm plate thickness for stable clamping Reliable performance for productive turning The insert combines a carbide substrate with the T9115 grade to deliver a balance of wear resistance and edge stability that suits a wide range of turning tasks. Designed for both external and internal turning, the geometry follows the ISO 160608 specification so that dimensional and tolerance expectations are clear. The 90° plate angle supports common turning directions and provides secure bearing in the toolholder, reducing vibration and enabling more consistent surface quality. For users seeking predictable tool life, the grade’s composition promotes stable chip formation and resistance to flank wear under typical cutting parameters. Compatibility that minimises setup time and rejects Compatibility with a toolholder depends on the insert’s form, clearance angle, tolerance class, fastening method, size and thickness. The rectangular format and a plate thickness of 6.35 mm ensure secure clamping in standardised holders when matched correctly. The insert’s special hole and hole style require corresponding seating components; when the holder and insert form a proper interface, clamping forces are distributed evenly and insert movement is prevented. This reduces the risk of premature edge failure, shortens changeover times and contributes to steady production flow in small-batch and serial turning alike. Geometry and grade selection for stable machining results A 0.8 mm corner radius provides a robust cutting edge that better withstands interrupted cuts and heavy engagement, while the 0° clearance angle indicates that the holder’s relief geometry must supply the necessary rake/clearance for the cutting process. Choosing the appropriate chipbreaker and grade—in this case the Tungaloy T9115—helps adapt the insert to the workpiece material and machining strategy. For operations where edge life and consistent dimensional accuracy matter, this combination reduces frequency of index changes and maintains component quality over longer runs. Contact Metav Werkzeuge for tailored application advice and to source the Tungaloy LNMX160608 indexable turning insert through our specialists at Metav Werkzeuge—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6861555 SKU: 6861555-Tungaloy Manufacturer SKU: TUN6861555 Facts Geometry designation: ISO 160608 Corner radius: 0.8 mm Plate thickness: 6.35 mm Plate size: 16 mm Clearance angle: 0° Plate angle: 90° Special features Indexable turning insert (ISO) Rectangular plate form Special hole / special hole style Tungaloy grade T9115 Chipbreaker: special Intended application: Turning Material: Carbide Compatibility depends on form, clearance angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suitable for? The Tungaloy LNMX160608 in grade T9115 is formulated for general turning; the carbide substrate and grade offer broad applicability across common steels and mixed materials when the correct chipbreaker and cutting data are selected. How does the 0.8 mm corner radius affect cutting? A 0.8 mm corner radius increases edge robustness and improves tolerance to interrupted cuts; with the LNMX160608 this helps preserve edge life and maintain surface finish under heavier engagement. Is the insert compatible with standard ISO toolholders? The LNMX160608 follows the ISO 160608 geometry, but compatibility requires matching the holder by form, clearance angle, tolerance class, fastening, size and thickness to ensure correct seating and clamping. What does the 0° clearance angle imply for setup? A 0° clearance angle means the holder must provide the required relief and rake geometry; correct holder selection ensures the intended cutting geometry and avoids unintended rubbing or edge loading. Can the insert be used for internal and external turning? Yes, the insert is intended for both external and internal turning operations, provided the holder and chipbreaker are chosen to suit the specific workpiece, cutting conditions and stability requirements. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
LNMX 160608 T9115 Wendeplatten - Tungaloy
Take advantage of the T9115 grade and cemented carbide substrate for a balance of wear resistance and edge stability; the ISO‑standard form and 0.8 mm corner radius ensure reliable holder compatibility and consistent part finish. Order genuine Tungaloy inserts via Metav Werkzeuge or consult their technical team for application-specific selection. LNMX160608 T9115 LNMX indexable turning insert — ISO 160608, rectangular form, 0.8 mm radius — Tungaloy LNMX160608 T9115 LNMX is an ISO‑standard, cemented‑carbide indexable insert designed for external and internal turning applications where a stable cutting edge and predictable wear behaviour are required ISO‑standard form for reliable holder compatibility T9115 grade with balanced wear resistance and toughness Rectangular 16 mm plate, 6.35 mm thickness 0.8 mm corner radius for controlled edge strength Improve cycle times with material‑matched cutting performance The LNMX series insert, specified here in the T9115 grade, is optimised to combine wear resistance with sufficient toughness, reducing unscheduled index changes and helping to maintain steady machining cycles. The cemented carbide substrate offers thermal stability during turning, while the chosen grade supports a broad range of steels and alloy types common in production environments. For manufacturers seeking reduced downtime, the outcome is more predictable tool life and fewer interruptions to the turning process. Minimise setup complexity through ISO compatibility and robust geometry Designed to the ISO‑160608 format, the insert guarantees dimensional and form compatibility with standard external holders when form, clearance angle and thickness match the tool body. The rectangular form and 6.35 mm thickness provide secure clamping and resistance to bending under moderate radial loads. The 0.8 mm corner radius supports a compromise between edge strength and surface finish, making the insert suitable for both roughing passes and light finishing where a consistent profile is required. Select the right grade and chipbreaker for your application The supplied grade complements the geometry by providing balanced edge stability and wear control; when combined with an appropriate chipbreaker and machining strategy the insert delivers repeatable results on a variety of steels and alloyed materials. Consider the stability of the setup and the intended cut depth: a stable system and correct feed will leverage the T9115 behaviour to extend index intervals and improve surface quality. For small lathes or heavy interrupted cuts, pairing the insert with the matching, rigid holder and appropriate clamp hardware is essential for consistent performance. Contact Metav Werkzeuge for application advice and genuine Tungaloy inserts and let their specialists recommend the optimal grade and chipbreaker for the turning task at hand. Technical data Article number: 6861567 Manufacturer SKU: TUN6861567 Label / designation: LNMX160608 T9115 Tungaloy‑insert Facts Material: cemented carbide ISO designation: 160608 Plate size: 16 mm Plate thickness: 6.35 mm Special features Grade/coating: T9115 Corner radius: 0.8 mm Clearance angle: 0° Plate form: rectangular Hole style: special Intended application: turning Included series: ISO indexable turning inserts FAQ What materials is this insert suited for? The LNMX160608 T9115 insert is intended for turning a wide range of steels and alloyed materials; the T9115 grade balances wear resistance and toughness for general turning tasks. How does the 0.8 mm corner radius affect performance? A 0.8 mm corner radius increases edge strength for more robust cutting and smoother transitions, helping to prevent premature chipping while still allowing acceptable surface finish. Is this insert compatible with standard ISO holders? Yes. The insert conforms to the ISO‑160608 format and therefore matches holders designed for that ISO form, provided holder geometry, clearance and thickness are compatible. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
LNMX 160608 T9115 Wendeplatten - Tungaloy
High wear resistance and reliable edge stability from the T9115 grade combined with ISO conformity and a compact 0.8 mm corner radius deliver consistent turning performance; order via Metav Werkzeuge or consult our specialists for application-specific selection. LNMX 160608 T9115 — Tungaloy indexable turning insert for Turning (ISO) LNMX160608 T9115 is an ISO‑format rectangular indexable insert engineered for general external and internal turning, offering a balanced combination of wear resistance and edge stability for productive machining. ISO-format rectangular insert for stable clamping T9115 grade for wear resistance and edge stability 0° relief with 0.8 mm corner radius for versatile turning Consistent cutting performance that reduces rework The LNMX160608 T9115 indexable insert delivers consistent cutting performance through a carbide substrate and the T9115 grade, which combines wear resistance with sufficient toughness to maintain the cutting edge under intermittent loads. The ISO geometry ensures repeatable seating in standard toolholders, helping to reduce vibration and improve surface finish. The combination of 0° relief and a 0.8 mm corner radius supports both finishing and light roughing passes, enabling manufacturers to standardise on a single insert type for multiple turning steps and thus simplify tool management. Easy integration into existing turning setups Compatibility is determined by insert form, relief angle, tolerance class, attachment method, size and thickness; this insert matches common ISO holders when those parameters align. The rectangular shape and a plate thickness of 6.35 mm provide a stable clamping interface that reduces micro‑movement at the tool tip. Dimensioned as 16 mm in size with a nominal 90° approach angle, the insert is straightforward to verify against holder specifications, lowering the risk of incorrect pairing and unplanned downtime. Clear ISO designation streamlines procurement and tool inventory control for production environments. Material choice and process advantages for steady productivity Manufactured from a high‑quality carbide and paired with the Tungaloy T9115 grade, the insert is optimised for stable chip formation and improved edge life in a range of turning tasks. The grade selection is aimed at balancing wear resistance with edge stability, which translates into fewer insert changes and more stable cycle times. For operations where chipbreaker and grade must be matched to workpiece material and cutting conditions, this insert serves as a reliable baseline: choose an appropriate chipbreaker and cutting data to exploit the insert’s strengths and achieve measurable productivity gains. Discuss application requirements with Metav Werkzeuge to ensure the LNMX160608 T9115 grade matches production needs; Metav Werkzeuge can advise on holder compatibility and process parameters Technical data Article number: 6861499 SKU: 6861499-Tungaloy Manufacturer SKU: TUN6861499 Name: LNMX160608 T9115 Tungaloy indexable insert Facts Grade: T9115 Material: carbide Corner radius: 0.8 mm Relief angle: 0° Thickness: 6.35 mm Size: 16 mm Approach angle: 90° Special features ISO turning insert series Rectangular plate form Hole style: special Application: Turning Chipbreaker: special FAQ What is the primary application for this insert? The LNMX160608 T9115 indexable insert is intended for general external and internal turning operations where a balance of wear resistance and edge stability is required. How does the T9115 grade influence machining performance? The T9115 grade provides a combination of wear resistance and toughness that supports longer edge life and reliable cutting under varied turning conditions. Which holder parameters determine compatibility with this insert? Compatibility depends on insert form, relief angle, tolerance class, attachment method, size and thickness; ensure the holder matches the LNMX160608 dimensions and ISO seating. Can this insert be used for both finishing and light roughing? Yes, the geometry with a 0.8 mm corner radius and 0° relief makes the insert suitable for finishing and light roughing when cutting data are adjusted accordingly. Is the LNMX160608 conforming to ISO standards? Yes, the insert follows ISO format conventions, simplifying replacement and stocking in ISO‑based tool systems. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
LNMX 160608 T9115 Wendeplatten - Tungaloy
Take advantage of the ISO conformity, the T9115 carbide grade and the compact geometry to secure consistent turning results and long tool life; order directly via Metav Werkzeuge or request compatibility advice from our consultants. LNMX 160608 T9115 turning insert for turning — Tungaloy ISO turning insert A LNMX160608 T9115 indexable insert designed for external and internal turning, offering a stable cutting edge and easy integration into standard ISO toolholder systems. ISO‑standard turning insert LNMX160608 T9115 Cemented carbide body for reliable durability 0° clearance angle for stable external turning 0.8 mm corner radius for precise finishes Improved productivity through a wear‑balanced grade The cutting edge is manufactured from cemented carbide in the T9115 grade, a combination optimised for a balance of wear resistance and toughness. That balance reduces flank and crater wear under typical turning operations and therefore extends productive cutting time between indexings. Because the insert complies with ISO dimensions, it integrates reliably into common holders; the result is predictable tool life and fewer unscheduled interventions on the machine, which supports higher throughput and lower unit costs. Geometry and system compatibility for stable machining The rectangular form, a 0° clearance angle and a 0.8 mm corner radius give this insert intrinsic rigidity and a controlled cutting engagement that benefits finishing passes and dimensionally critical work. The insert’s 6.35 mm thickness and special hole style require a matching clamping kit and underlay plate to achieve repeatable seating. The insert is intended to be used as part of a system—indexable insert, compatible external holder or boring bar, shim/clamp set and replacement screws—so verifying holder form, clearance specification and tolerance class ensures correct fitting and repeatable component accuracy. Practical selection advice for reliable part quality For efficient process planning, pair the insert grade and chipbreaker selection with the workpiece material and the stability of the set‑up. The Tungaloy grade complements the chosen geometry by prioritising a long‑lasting cutting edge and stable chip formation, helping to maintain surface finish and dimensional stability across production runs. The item is listed under SKU TUN6861501 and is suited to a range of turning tasks where consistent edge control and straightforward insert indexing are required. Contact Metav Werkzeuge for tailored advice on holder compatibility and process optimisation for Tungaloy turning inserts or request a quote referencing SKU TUN6861501 — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6861501 Manufacturer SKU: TUN6861501 Label: LNMX160608 T9115 Tungaloy‑insert Model series: ISO‑turning indexable inserts Facts Thickness: 6.35 mm Corner radius: 0.8 mm Size: 16 mm Clearance angle: 0° ISO code: 160608 Included angle: 90° Design & Features Shape: rectangular Material: cemented carbide Grade: T9115 Chipbreaker: special Hole style: special Application: turning (external and internal) FAQ What materials is this insert suitable for? The LNMX160608 T9115 insert is designed for general turning applications; match the T9115 grade and the chosen chipbreaker to the specific workpiece material for optimal performance. How does the 0° clearance angle affect machining? A 0° clearance angle increases support behind the cutting edge and improves stability during external turning, which helps to maintain dimensional accuracy under moderate to heavy cuts. Can the insert be used in my existing ISO holder? Compatibility depends on holder form, free angle, tolerance class, fastening method, size and thickness; verify these parameters against the LNMX160608 dimensions before mounting. What is the recommended system for mounting this insert? Use a matching external holder or boring bar together with the correct underlay/shim, clamp set and replacement screws to ensure repeatable seating and secure clamping of the insert. Is the LNMX160608 T9115 suitable for finishing operations? Yes — the 0.8 mm corner radius and stable grade make the insert well suited to finishing passes where surface quality and dimensional control are required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
LNMX 160608 T9125 Wendeplatten - Tungaloy
Take advantage of the combination of robust carbide performance, ISO compatibility and a compact 0.8 mm corner radius to maintain stable turning processes; order the insert directly via Metav Werkzeuge or request advice from the consultants if further assistance is required. LNMX 160608 T9125 indexable turning insert by Tungaloy — carbide grade with 0.8 mm corner radius for ISO turning LNMX160608 T9125 Tungaloy-Wendeplatte is a rectangular, ISO‑design insert for general turning applications, designed to deliver wear resistance and edge stability in demanding production environments ISO-standard turning insert Tungaloy T9125 carbide grade 0.8 mm corner radius for finishing Rectangular 16 mm plate, 6.35 mm thick Predictable tool life for efficient machining The combination of the Tungaloy T9125 grade and a carbide substrate provides a balance of wear resistance and toughness that supports consistent performance across serial turning operations. This grade is formulated to complement the insert geometry, so the cutting edge stays stable under varying temperatures and cutting forces; the result is reduced tool changes and more predictable cycle times. As part of an ISO-standard insert family, the component integrates with established toolholder systems when matched by form, relief angle, tolerance class, clamping and thickness. Fast, reliable holder compatibility and set-up Compatibility with a toolholder depends on several measurable parameters: form, relief angle (0°), tolerance class, clamping method, size and thickness. Clear specification of these attributes simplifies selection of the correct holder or boring bar and reduces set-up time at the machine. The insert’s special hole style and clamping arrangement are compatible with matching underplates and screw kits, enabling secure fixation and repeatable seating for high‑precision turning tasks. Geometry optimised for stable turning results The rectangular plate (16 mm) with a 0.8 mm corner radius and a 6.35 mm plate thickness gives a controlled contact zone that is particularly suitable for external and internal turning when a fine to medium edge form is required. The special chipbreaker geometry directs swarf reliably and can be selected to match the workpiece material and machining parameters; this reduces the likelihood of built‑up edge and improves surface finish. Where higher rigidity is needed, the plate thickness and clamping ensure the insert remains stable under heavier cuts. Integration into production and practical benefits The insert is intended for turning applications and is delivered as part of a system: ISO indexable insert, compatible external holder or boring bar, suitable underplate/clamp set and replacement screws. Choosing the right chipbreaker and grade for the material and operation ensures efficient material removal and extended tool life. Documentation of ISO designation 160608 and the manufacturer SKU supports inventory control and traceability in production planning. For workshops aiming for reproducible component quality, this insert provides a straightforward technical basis for process stabilisation. For ordering, technical clarification or assistance in selecting the correct holder configuration, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — Metav Werkzeuge provides product availability and application guidance for Tungaloy inserts. Technical data Article number: 6861500 Manufacturer SKU: TUN6861500 Label: LNMX160608 T9125 Tungaloy-Wendeplatte SKU: 6861500-Tungaloy Core specifications ISO designation: 160608 Corner radius: 0.8 mm Plate size: 16 mm Plate thickness: 6.35 mm Relief angle: 0° Hole style: special Angle: 90° Materials & features Material: carbide Grade/coating: Tungaloy T9125 Plate form: rectangular Chipbreaker: special Intended application: turning Holder compatibility parameters: form, relief angle, tolerance class, clamping, size, thickness FAQ What machining tasks is this insert designed for? The insert is intended for turning operations; the Tungaloy T9125 grade and rectangular plate form are suited to external and internal turning where a 0.8 mm corner radius is appropriate. How does the ISO designation 160608 relate to fitment? The ISO code 160608 identifies the plate geometry and size; compatibility with a holder is then confirmed by matching form, relief angle, tolerance class, clamping method, plate size and thickness. Which features influence cutting performance most? Cutting performance is primarily influenced by the Tungaloy T9125 grade (wear resistance and toughness), the chipbreaker geometry and the 0.8 mm corner radius, which together determine edge stability and swarf control. Can the insert be used for different workpiece materials? The grade and chipbreaker should be selected to suit the workpiece material and machining method; the Tungaloy grade complements the insert geometry to balance wear resistance and toughness for a broad range of turning tasks. What information supports inventory and traceability? Use the article number (6861500), manufacturer SKU (TUN6861500) and the full designation LNMX160608 T9125 for ordering, stockkeeping and process documentation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
LNMX 160608 T9125 Wendeplatten - Tungaloy
Benefit from the combination of Tungaloy T9125 grade, ISO LNMX geometry and a 0° clearance angle for stable, predictable turning performance; order the insert directly via Metav Werkzeuge or consult our technical advisors for holder compatibility and delivery details. LNMX 160608 T9125 turning insert — ISO LNMX160608, 0° clearance, Tungaloy The LNMX160608 T9125 is an ISO-format turning insert engineered for external and internal turning, offering a balance of wear resistance, toughness and edge stability suited to general turning applications ISO LNMX160608 geometry for standard holders T9125 grade for wear resistance and toughness 0° clearance angle for predictable cutting 6.35 mm plate thickness for stable clamping Consistent cutting performance for turning operations The ISO-format insert delivers consistent results in turning operations by combining the LNMX160608 geometry with a Tungaloy-developed grade. The plate’s cemented carbide composition and T9125 grade create a controlled balance between wear resistance and toughness, so the cutting edge maintains stability under varying loads. This translates into fewer interruptions, predictable tool changes and more uniform part quality, which supports leaner production cycles and reduced rework. Broad applicability with an emphasis on edge integrity Designed for both external and internal turning, the insert’s engineering focuses on preserving the cutting edge over longer tool life. The Tungaloy grade complements the insert geometry to provide edge stability and consistent flank wear behaviour. For operations where repeatability is required, the combined properties reduce the frequency of insert indexing and replacement, contributing to higher uptime and improved process reliability. Secure clamping and holder compatibility explained Compatibility with toolholders is determined by the insert’s form, clearance angle (0°), tolerance class, fastening method, size and thickness. The rectangular plate measures 16 mm with a plate thickness of 6.35 mm, and a corner radius of 0.8 mm, features that help ensure stable clamping and controlled cutting forces. The insert also has a special hole and a special chipbreaker, which require matching pockets and fastening components to achieve full system stability. When the holder and clamping set match these parameters, vibration is reduced and surface finish improves. Grade selection and productivity gains Choosing the T9125 grade provides a productive compromise between durability and toughness: the result is extended tool life in many turning tasks without sacrificing edge reliability. The insert forms part of a modular system — ISO insert, compatible external holder or boring bar, underlay/shim and clamping screws — that allows quick replacement and simple inventory handling. In practical terms, this supports higher parts-per-tool ratios and predictable maintenance intervals, improving overall machining throughput and cost-efficiency. For technical advice on matching holders, availability of LNMX160608 T9125 inserts or to arrange a trial batch, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our specialists will advise on holder compatibility and delivery options. Technical data Article number: 6861553 Manufacturer SKU: TUN6861553 SKU: 6861553-Tungaloy Model series: ISO-Drehwendeschneidplatten Type designation: LNMX160608 T9125 Facts Corner radius: 0.8 mm Plate thickness: 6.35 mm Plate size: 16 mm Clearance angle: 0° Insert angle: 90° Special features Material: Cemented carbide Grade: T9125 (Tungaloy) Plate form: Rectangular Hole style: Special Chipbreaker: Special Typical application: Turning (external and internal) System components: Insert, holder, underlay/clamping set, screws FAQ What turning tasks is this insert suited for? The LNMX160608 T9125 turning insert is intended for general external and internal turning where a balance of wear resistance and toughness is required for consistent edge life. Which holder characteristics must be matched for correct installation? Compatibility requires a holder that matches the insert’s form, 0° clearance angle, size (16 mm), thickness (6.35 mm) and the special hole and chipbreaker geometry to ensure secure clamping and optimal performance. What benefits does the T9125 grade provide? The T9125 grade offers a compromise between abrasion resistance and fracture toughness, delivering longer tool life and reliable cutting-edge behaviour under varying cutting conditions. Are the chipbreaker and hole standard? The insert is specified with a special chipbreaker and special hole style; these features are designed for specific chip control and require matching holder pockets. What are the key dimensions to check before ordering? Refer to the LNMX160608 T9125 specifications: plate size 16 mm, plate thickness 6.35 mm, corner radius 0.8 mm, clearance angle 0° and insert angle 90°. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
LNMX 160608 T9125 Wendeplatten - Tungaloy
Take advantage of a proven turning solution that pairs ISO‑standard geometry with a wear‑resistant carbide grade to maintain stable cutting performance. The LNMX160608 form, with a 0.8 mm nose radius and 6.35 mm plate thickness, delivers repeatable edge life and reliable clamping in ISO holders; order via Metav Werkzeuge or contact our consultants for application advice. LNMX160608 T9125 LNMX 160608 Turning Insert – Tungaloy, 0.8 mm radius, 90° The LNMX160608 T9125 is an ISO‑standard indexable turning insert designed for external and internal turning, combining a robust carbide body with a Tungaloy‑engineered grade for balanced wear resistance and toughness ISO‑standard indexable insert, LNMX form Tungaloy T9125 grade for wear resistance 0.8 mm nose radius for fine finishing 6.35 mm plate thickness, rectangular form Precise geometry for consistent turning performance The LNMX form is manufactured to ISO tolerances so compatibility with holders and boring bars is predictable: fit depends on insert form, relief angle, tolerance class, fastening method, size and thickness. The 90° approach offers straightforward set‑up for shoulder and facing cuts, while the free angle of 0° influences contact conditions at the cutting edge. Such geometry reduces unplanned variation in chip formation and helps to maintain process stability across batch runs. By choosing an ISO‑matched insert, toolroom setup time is reduced and repeatability between tool changes is improved. Carbide grade T9125: tailored wear and edge stability The T9125 grade from Tungaloy provides a deliberate blend of wear resistance and toughness, optimised for turning operations where a balance between life and edge integrity matters. This carbide formulation supports longer intervals between indexings and contributes to stable cutting edges under typical interrupted and continuous cuts. For workshops seeking predictable tool life and fewer unscheduled regrinds, the grade's properties support consistent surface finish and dimensional control without excessive compromise on edge strength. Robust form and chip management for productive machining A rectangular form with 6.35 mm plate thickness gives the insert a stiff platform for clamping, reducing vibration and improving dimensional consistency. The 0.8 mm nose radius is suited to fine finishing and light to medium cutting depths, producing a reliable surface quality. A special chipbreaker and customised hole style are provided to handle specific chip control requirements; the specialised hole and chipbreaker design ensure secure fastening and orderly chip flow, which supports higher metal removal rates when combined with an appropriately rigid holder and stable set‑up. Practical integration and selection guidance System composition typically comprises the insert, a matching external holder or boring bar, a shim/clamp set and replacement screws. Selection should consider the application — external or internal turning — and match the chipbreaker and grade to the workpiece material, machining type and assembly rigidity. Compatibility is dictated by insert form, relief angle, tolerance and thickness, so confirm holder matching before purchase. When correctly integrated, this insert contributes to lower cycle time variation and more predictable tool consumption. Contact Metav Werkzeuge for tailored recommendations on Tungaloy turning inserts and to discuss the LNMX160608 application needs; email info@metav-werkzeuge.com or call +49 2822 7131930 to speak with our technical team. Technical data Article number: 6861568 Manufacturer SKU: TUN6861568 SKU: 6861568-Tungaloy Model series: ISO turning indexable inserts Material: tungsten carbide Facts Nose radius: 0.8 mm Approach angle: 90° Free angle: 0° Plate thickness: 6.35 mm Plate size: 16 mm Special features Grade: T9125 (Tungaloy) Rectangular plate form Special chipbreaker Special hole style Intended application: turning System components: insert, external holder/boring bar, shim/clamp set, replacement screws FAQ What machining tasks is this insert intended for? The LNMX160608 T9125 is designed for external and internal turning tasks and is suited to finishing and general turning where a 0.8 mm nose radius and ISO geometry are appropriate. How does the T9125 grade affect tool life? The Tungaloy T9125 grade balances wear resistance and toughness to provide stable cutting edges and predictable tool life for a range of turning operations. Which holder features must match the insert? Compatibility requires that the holder matches the insert form, relief angle, tolerance class, fastening method, size and thickness; these factors determine secure clamping and correct seating. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
LNMX 160612 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of a universal, PVD-coated AH725 grade and the robust 90° rectangular geometry for consistent process security in mixed steel machining. The ISO compatibility and 1.2 mm corner radius support stable cutting and predictable tool life. Order the LNMX160612 AH725 indexable insert directly via Metav Werkzeuge or ask our consultants if needed. LNMX160612 AH725 ISO indexable turning insert — 90° rectangular, PVD-coated | Tungaloy The LNMX160612 AH725 is an ISO-standard indexable insert engineered for external and internal turning, offering a universal grade for steels and stainless steels with high process security. ISO-standard rectangular insert PVD-coated carbide AH725 grade Universal for steel and stainless steels 90° geometry for stable cutting Corner radius 1.2 mm for robustness Consistent performance across mixed steels and stainless steels The universal AH725 grade combines a PVD-coated surface with a tough carbide substrate to provide reliable cutting in both steel and stainless steels. This combination reduces the risk of edge failure in varied workpiece batches and supports longer tool cycles, meaning fewer interruptions and a more consistent production rhythm. The 1.2 mm corner radius increases edge strength, while the insert’s geometry helps maintain a repeatable cutting force, improving dimensional stability on turned components. Simple integration with ISO tooling systems As an ISO-standard component, the insert fits into established tooling systems when the form, clearance angle 0°, tolerance class, clamping arrangement and dimensions are matched to the holder. The overall system typically comprises the insert, a compatible external holder or boring bar, a clamping set (shim) and replacement screws. Specifying the correct holder and clamping components eliminates assembly play, ensures secure fixation and preserves the coated cutting edge during high-feed or interrupted cuts. Productivity advantages through predictable behaviour The PVD coating delivers increased wear resistance and heat protection under continuous cutting, which supports higher cutting speeds where appropriate. Selecting a matching chipbreaker and grade for the workpiece and machining stability reduces built-up edge and improves surface finish, thereby raising overall productivity. For small tools and operations with varying materials, a universal insert grade like this minimises tooling variants in stock while maintaining the necessary process security for shop-floor reliability. For reliable, process-secure turning with Tungaloy inserts, consult Metav Werkzeuge for application advice or to order the LNMX160612 AH725 insert; contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6861520 SKU: 6861520-Tungaloy Manufacturer SKU: TUN6861520 Manufacturer article number: 6861520 Material: Carbide Grade: AH725 Model series: ISO indexable turning inserts Designation: LNMX160612 Manufacturer: Tungaloy Facts Size: 16 mm Thickness: 6.35 mm Corner radius: 1.2 mm Clearance angle: 0° Insert angle: 90° Shape: Rectangular Special features PVD coating Universal, break-resistant grade for steel and stainless steels Suitable for external and internal turning Special chipbreaker Special hole and hole style Typical system: insert, external holder or boring bar, shim/clamping set, replacement screws FAQ What materials is this insert designed for? The LNMX160612 AH725 insert is designed as a universal, break-resistant grade primarily for steel and stainless steels, making it suitable for workshops that handle mixed batches. How is compatibility with a holder determined? Compatibility depends on insert form, clearance angle (0°), tolerance class, clamping method, size and thickness; the LNMX160612 must be matched to a holder that accepts its rectangular shape and 6.35 mm thickness. Which chipbreaker should be chosen for best results? Select a chipbreaker matched to the workpiece and machining stability: the LNMX160612 AH725 performs well with a chipbreaker suited for mixed steels to ensure controlled chips and good surface finish. What benefit does the PVD coating deliver? The PVD coating on the AH725 grade increases wear resistance and thermal protection, helping to maintain edge integrity and supporting higher cutting speeds where process conditions allow. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
LNMX 160612 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of PVD‑coated carbide resilience and the AH725 grade’s proven process security for reliable turning operations; the ISO LNMX form ensures fast, repeatable indexability. Order directly via Metav Werkzeuge or request application advice from our consultants. LNMX160612 AH725 Tungaloy ISO turning insert — PVD‑coated carbide, 1.2 mm radius A LNMX160612 AH725 ISO turning insert engineered for external and internal turning where stable chip formation and high process reliability are required. PVD‑coated carbide for process stability Universal AH725 grade for steel and stainless steel Robust 1.2 mm corner radius for edge strength ISO LNMX form for broad holder compatibility Improved process security and longer tool life The AH725 grade combines a PVD‑coated carbide substrate with a formulation tuned for both steel and stainless steel, delivering consistent cutting performance across mixed batches. The coating reduces adhesive wear and improves edge durability, which translates into fewer indexings and reduced machine downtime. For production environments with changing workpiece materials or smaller tool assemblies, the result is measurable: more consistent cycle times and a lower rate of unexpected tool changes. The focus on efficient chip control and fracture resistance supports a stable machining process and predictable component quality. Precise fit, repeatable clamping and system compatibility Designed to ISO LNMX form, this insert depends on matching the holder by form, relief angle, tolerance class, attachment, size and thickness. The 0° relief angle and a plate thickness of 6.35 mm ensure firm seating and repeatable geometry when combined with the correct clamp set and replacement screws. The rectangular 16 mm plate format and the special hole style require the appropriate holder or boring bar, but provide excellent rigidity once mounted. Clear definition of these parameters reduces setup time and enhances positional repeatability in serial production. Practical selection guidance for optimum results Choose the chipbreaker and grade to suit the material, operation and desired surface finish: the universal AH725 excels where process safety and resistance to chipping are priorities, especially in varying batches. A 1.2 mm corner radius favours strength and a robust cutting edge, suitable for general turning and semi‑finishing; if the requirement is a mirror finish or very fine tolerances, a smaller radius would be preferred. Because the insert belongs to an ISO system, integration into existing tool families is straightforward provided holder compatibility is checked; consider spare clamp components and screws as part of the toolset to maintain uptime. Contact Metav Werkzeuge for tailored application advice or to request the LNMX160612 AH725 Tungaloy insert and compatible clamping components — eMail: info@metav-werkzeuge.com • Phone: +49 2822 7131930 Technical data Article number: 6861557 SKU: 6861557-Tungaloy Manufacturer SKU: TUN6861557 Model series: ISO turning inserts Label: LNMX160612 AH725 Tungaloy insert Dimensions & measurable values Corner radius: 1.2 mm Plate thickness: 6.35 mm Plate size: 16 mm Main angle: 90° Relief angle: 0° ISO index: 160612 Materials & features Material: cemented carbide Coating: PVD Grade: AH725 Plate shape: rectangular Hole style: special Chipbreaker: special Intended use: turning (external and internal) Compatibility: ISO LNMX form; requires matching holder/clamp FAQ What materials is this insert suitable for? The LNMX160612 AH725 Tungaloy indexable insert (SKU 6861557‑Tungaloy) is optimised for machining steel and stainless steel, offering robust chip control and resistance to edge breakage. How does the AH725 grade help with mixed‑material batches? The AH725 grade in this Tungaloy insert combines wear resistance and a fracture‑resistant microstructure so that the insert remains reliable when switching between different steels and stainless steels. What should be checked for holder compatibility? Compatibility depends on ISO LNMX form, relief angle (0°), tolerance class, attachment method, plate size (16 mm) and thickness (6.35 mm); ensure the holder or boring bar matches these parameters for repeatable clamping. Is the 1.2 mm corner radius suitable for finishing? A 1.2 mm corner radius provides a sturdy cutting edge for general turning and semi‑finishing; for finesse surface finishes, a smaller radius is typically recommended. Does the insert require special clamping parts? This LNMX insert uses a special hole style and may require a corresponding underlay/clamp set and replacement screws as part of the full system assembly. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
LNMX 160612 T9115 Wendeplatten - Tungaloy
Take advantage of the ISO-standard geometry and the Tungaloy T9115 carbide grade for consistent cutting performance and extended tool life; the robust 1.2 mm corner radius and 6.35 mm thickness ensure stable edge support in both external and internal turning. Order original inserts through Metav Werkzeuge or consult our specialists for application guidance. LNMX160612 T9115 indexable turning insert by Tungaloy — rectangular ISO insert for general turning LNMX160612 T9115 is an ISO-compliant, rectangular indexable insert intended for external and internal turning operations, offering a combination of wear resistance and edge stability for productive machining. ISO-compliant rectangular insert LNMX160612 Tungaloy grade T9115 for wear resistance 1.2 mm corner radius for robust cutting 0° relief angle and 90° insert geometry Stable production through ISO conformity and clear compatibility The ISO-compliant geometry ensures consistent fitment in standard toolholders; compatibility is determined by form, relief angle, tolerance class, fastening method, size and thickness. This standardisation reduces setup time and minimises toolholder mismatch. When installed in a correctly rated holder and secured with the appropriate shim and screws, the insert supports predictable tool life and repeatable process results, which contributes to uninterrupted production and easier inventory management. Durable cutting performance from the Tungaloy grade The Tungaloy T9115 cutting grade combines carbide substrate properties with a balance of wear resistance and toughness, designed to maintain edge integrity across a range of turning tasks. This results in fewer indexings and longer intervals between insert changes, improving machine uptime. For workshop planners, the result is a measurable improvement in productive cutting time and reduced tooling handling, especially when machining medium to general engineering materials. Geometry engineered for edge support and surface quality With a 1.2 mm corner radius, 0° relief angle and a 6.35 mm thickness, the insert delivers substantial edge support and rigidity for demanding radial cutting forces. The rectangular 16 mm format gives a stable seating area within the clamping system, while the 90° wedge geometry is suitable for a broad range of turning profiles. A special central hole style provides secure mounting; this contributes to consistent surface finish and resistance to chipping under intermittent cuts. Practical system approach for efficient turning The cutting plate is part of a complete system: ISO insert, compatible external holder or boring bar, underlay/shim set and replacement screws. Selecting the appropriate chipbreaker and grade for the workpiece material and process stability is essential — the insert is intended for turning and accepts a chip control solution matched to the operation. Using the insert within a matched system allows shops to exploit the full benefit of the grade’s wear performance and maintain consistent component tolerances. Contact Metav Werkzeuge for tailored application advice on the Tungaloy LNMX160612 T9115 insert — call +49 2822 7131930 or email info@metav-werkzeuge.com for specification support and availability Technical data Article number: 6861537 Manufacturer SKU: TUN6861537 Metav SKU: 6861537-Tungaloy Designation: LNMX160612 T9115 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Numbers / Core technical data Insert size: 16 mm Thickness: 6.35 mm Corner radius: 1.2 mm Relief angle: 0° Wedge/lead angle: 90° Manufacturer article number: 6861537 Special features / Versions Rectangular plate form Special central hole style (Sonder) Special chipbreaker (Sonder) Grade: T9115 (Tungaloy) Intended application: turning (external and internal) System components: matching holder, underlay/shim and screws Compatibility determined by form, relief angle, tolerance class, fastening, size and thickness FAQ What is the primary application for this insert? The LNMX160612 T9115 indexable turning insert from Tungaloy is designed for external and internal turning; it is best used where robust edge support and consistent chip control are required. Which materials can be machined with this grade? The Tungaloy T9115 grade is formulated for general turning applications and offers a balance of wear resistance and toughness suitable across common engineering materials; matching the chipbreaker and cutting data to the workpiece is recommended. How does the 1.2 mm corner radius affect performance? A 1.2 mm corner radius increases edge strength and stability, improving resistance to chipping and supporting higher radial depths of cut while contributing to a consistent surface finish. Is a special holder required for compatibility? Compatibility is governed by insert form, relief angle, size and thickness; the insert is ISO-compliant and will fit holders specified for LNMX160612 geometry when the correct clamping parts and tolerances are observed. What system components are needed for safe use? Safe and repeatable use requires a suitable ISO-rated toolholder or boring bar, the correct underlay/shim set and replacement screws; the insert is intended to be used as part of that system. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
LNMX 160612 T9115 Wendeplatten - Tungaloy
Take advantage of the combination of ISO‑standard geometry, Tungaloy T9115 carbide grade and a 1.2 mm corner radius for reliable turning performance and predictable tool life; order via Metav Werkzeuge or consult its specialists for application advice. LNMX 160612 T9115 turning insert — Tungaloy carbide, rectangular, 1.2 mm radius The LNMX160612 T9115 is an ISO‑standard rectangular turning insert designed for general external and internal turning applications where a balance of wear resistance and edge stability is required. ISO‑standard LNMX160612 format T9115 carbide grade for wear control 1.2 mm corner radius for edge strength Rectangular insert, 6.35 mm thickness Stable cutting performance for demanding turning The T9115 grade, developed by Tungaloy, combines carbide substrate properties that favour a controlled compromise between wear resistance and toughness. This balance reduces unexpected edge chipping during interrupted cuts and contributes to more consistent component batches. For machining tasks where repeatability and predictable tool life matter, the combination of grade and geometry helps maintain stable cutting forces and a uniform surface finish. Compatibility that simplifies tool selection Being an ISO‑standard insert, the format and dimensions are set to fit compatible toolholders when form, 0° relief angle, tolerance class, fastening method, size and thickness match. The standardised geometry shortens setup time and simplifies toolholder inventory management. Selecting a matching chipbreaker and grade according to workpiece material and stability yields efficient machining cycles and fewer tool changes. Edge stability and improved surface quality A 1.2 mm corner radius increases edge strength and helps produce improved part surfaces in typical turning operations. The larger corner radius spreads cutting forces over a bigger area, reducing local stress and prolonging edge life while smoothing the workpiece finish. For components requiring consistent dimensional quality, this geometry supports reduced rework and less polishing. System approach for productive machining The insert is intended to be used as part of a system: ISO turning insert, an appropriate external holder or boring bar, shim/clamp set and replacement screws. A matched system reduces vibration and supports higher productivity and consistent chip evacuation. When combined with a suitable chipbreaker and cutting conditions adapted to the material being machined, the setup delivers efficient material removal with predictable tool life. Contact Metav Werkzeuge for tailored advice on Tungaloy turning inserts, stock availability or technical data — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6861504 SKU: 6861504-Tungaloy Manufacturer SKU: TUN6861504 Model series: ISO turning inserts Core data Corner radius: 1.2 mm Thickness: 6.35 mm Plate size: 16 mm Relief angle: 0° Included angle: 90° ISO designation: 160612 Features Material: carbide Grade: T9115 (Tungaloy) Application: turning Plate shape: rectangular Hole type: special Hole style: special Chipbreaker: special Compatibility criteria: form, relief angle, tolerance class, fastening, size, thickness FAQ What materials is this insert suitable for? The LNMX160612 T9115 insert is specified for standard turning tasks; its T9115 carbide grade provides a broad material coverage that balances wear resistance and toughness for many steels and alloyed materials. How does the 1.2 mm corner radius affect machining? A 1.2 mm radius increases edge strength and improves surface finish by distributing cutting forces, which helps to reduce chipping and achieve more consistent part quality during turning. Which holders fit this insert format? Holders compatible with the ISO LNMX160612 geometry and matching relief angle, tolerance class, fastening method, size and thickness are required to secure correct fit and function. Is this an original Tungaloy product and what is the SKU? Yes, this is an original Tungaloy turning insert; the SKU is 6861504-Tungaloy and the manufacturer article number is 6861504. Can this insert be used for internal as well as external turning? The insert is suitable for both external and internal turning operations provided the chosen holder and machining stability match the application. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
LNMX 160612 T9115 Wendeplatten - Tungaloy
Take advantage of the ISO conformity, T9115 carbide grade and robust geometry for consistent turning operations; order the insert directly via Metav Werkzeuge or ask the consultants if further specification advice is required. LNMX160612 T9115 Tungaloy insert — ISO rectangular turning insert, 1.2 mm corner radius The LNMX160612 T9115 Tungaloy insert is an ISO‑standard rectangular indexable insert designed for both external and internal turning where a balance of wear resistance and edge stability is required. ISO‑standard rectangular insert Tungaloy T9115 carbide grade 1.2 mm cutting edge radius 6.35 mm plate thickness Consistent wear resistance and edge stability for turning operations The combination of Tungaloy’s T9115 grade and carbide construction provides a balance between wear resistance and toughness that supports reproducible cutting performance. This grade stabilises the cutting edge under intermittent and continuous cuts, reducing the frequency of insert changes and supporting longer production runs. With the ISO format and standardised datum positions, the plate integrates into existing tool systems while maintaining repeatable orientation, contributing to reliable cycle times on turning centres. Improved rigidity and surface quality from optimised geometry A 1.2 mm corner radius and a plate thickness of 6.35 mm increase stiffness at the cutting zone, which helps to reduce vibration and enhance surface finish during both roughing and light finishing passes. The rectangular shape and robust plate dimensions deliver mechanical stability, while the specified 0° relief angle aligns the cutting geometry for typical turning movements. The presence of a dedicated chipbreaker (special) supports controlled chip formation; selecting the appropriatebreaker and insert grade enables optimisation of chip flow and reduces the risk of built‑up edge. System compatibility and practical integration for production The insert is part of the ISO turning plate family and must be matched to a compatible holder and clamping system; compatibility depends on the form, relief angle, tolerance class, fastening method, size and thickness. The system build typically comprises the ISO indexable plate, a matching external holder or boring bar, a backing/clip set and replacement screws. For practical planning, identify the holder interface and tolerance class first, then select the indexable insert geometry and T9115 grade that best suit the intended material and machining strategy. For technical ordering or specification of the Tungaloy LNMX160612 T9115 insert, contact Metav Werkzeuge for consultation and supply: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6861587 Manufacturer SKU: TUN6861587 Vendor SKU: 6861587-Tungaloy Model series: ISO turning indexable plates Dimensions & core data Corner radius: 1.2 mm Plate size: 16 mm Plate thickness: 6.35 mm Relief angle: 0° Approach angle: 90° Materials & special features Material: carbide Grade: T9115 (Tungaloy) Plate form: rectangular Hole style: special Chipbreaker: special Application: turning Compatibility determined by form, relief angle, tolerance class, fastening, size and thickness FAQ What applications suit this insert best? The LNMX160612 T9115 Tungaloy insert is intended for external and internal turning; the T9115 grade complements the geometry for general turning tasks that require a balance of wear resistance and toughness. How does the T9115 grade affect performance? T9115 is a Tungaloy carbide grade formulated to provide stable edge life and balanced wear resistance, improving repeatability in turning operations without sacrificing toughness at the cutting edge. Which parameters determine holder compatibility? Compatibility is defined by the insert form, 0° relief angle, tolerance class, fastening method, overall size (16 mm) and plate thickness (6.35 mm); matching these parameters ensures correct seating and stable clamping. Is special tooling required for the insert’s hole and chipbreaker? The insert uses a special hole and chipbreaker style; corresponding holders and clamping sets or backing plates that accept the special hole and secure the plate are required for correct function. What is the correct part number for order and reference? Reference the manufacturer article number 6861587 or the manufacturer SKU TUN6861587 when ordering the LNMX160612 T9115 Tungaloy turning insert Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
LNMX 160612 T9115 Wendeplatten - Tungaloy
Take advantage of a robust combination of Tungaloy carbide grade and ISO-compliant geometry for consistent production results; the LNMX160612 insert delivers wear resistance and edge stability, and can be ordered directly via Metav Werkzeuge or by consulting the Metav team for application advice. LNMX160612 T9115 — ISO turning insert (Drehen) | Tungaloy LNMX160612 T9115 is an ISO-format indexable insert intended for external and internal turning operations, designed to match ISO holders by form, clearance, tolerance class and thickness. ISO LNMX 160612 geometry, ISO-compliant Tungaloy T9115 carbide grade for wear resistance 1.2 mm nose radius for reliable edge strength 6.35 mm plate thickness, 0° relief angle Consistent chip control and reliable indexable performance The LNMX160612 T9115 indexable insert is engineered to provide stable chip formation and predictable tool life in turning applications. With a focus on measurable outcomes, the combination of the T9115 cutting grade and the rectangular plate geometry yields enhanced edge stability and reduced flank wear. The ISO conformity simplifies procurement and tool management for production environments that standardise on ISO clamping systems. The special hole and chipbreaker design support secure clamping and tailored chip flow, making the insert suitable where process repeatability and low downtime are priorities. Geometry and holder compatibility that cut setup time The insert's geometry — including a 1.2 mm nose radius, 0° relief angle and a 90° approach — offers a balance between edge strength and dimensional control. The 6.35 mm plate thickness provides rigidity in the cutting zone, which reduces vibration when used with compatible external holders or boring bars. ISO‑standard dimensions mean the insert is interchangeable across matching holders, minimising tool change complexity and supporting faster set-ups. These geometric features translate into tangible production benefits: improved surface finish in many turning tasks and fewer interrupted cycles caused by insert breakage. Carbide composition and application scope for efficient machining Manufactured from carbide, the insert's material composition is focused on a mix of wear resistance and toughness appropriate for a broad range of steels and common engineering alloys. The Tungaloy grade is selected to complement the insert geometry, providing a balance between longevity and predictable edge behaviour. The item is intended for turning and is best paired with a chipbreaker and grade selected to match material, machining parameters and machine stability. For operations requiring specific chip control or advanced mixed-material work, the special chipbreaker and hole style permit adaptation to bespoke clamping and coolant strategies. For application guidance or to procure genuine Tungaloy LNMX160612 T9115 inserts, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — technical consultants are available to advise on holder compatibility and process optimisation. Technical data Article number: 6861589 Manufacturer SKU: TUN6861589 SKU: 6861589-Tungaloy Manufacturer: Tungaloy Model series: ISO-Drehwendeschneidplatten Product name: LNMX160612 T9115 Tungaloy indexable insert Facts Nose radius: 1.2 mm Plate thickness: 6.35 mm Plate size: 16 mm ISO code: 160612 Relief angle: 0° Geometry angle: 90° Special features Carbide material Cutting grade: T9115 Rectangular plate form Special hole style Special chipbreaker Intended use: turning (external and internal) Compatibility determined by form, clearance and tolerance class FAQ What materials is this insert suitable for? The LNMX160612 T9115 insert is designed for machining a broad range of steels and common engineering alloys; the T9115 grade emphasises wear resistance while maintaining edge toughness. Can this insert be used in standard ISO holders? Yes, the insert follows the ISO LNMX 160612 geometry so compatibility with matching ISO external holders and boring bars is ensured by the form, clearance and tolerance class. How does the 1.2 mm nose radius affect the machining result? A 1.2 mm nose radius improves edge strength and contributes to better surface finish on many turning operations, while maintaining dimensional stability under moderate cutting forces. What does the special hole style mean for clamping? The special hole requires the correct clamping components and screws for secure retention; this design supports reliable seating and repeatable positioning in the holder. Is the chipbreaker suitable for heavy interrupted cuts? The insert features a special chipbreaker intended to be selected according to workpiece material and cutting conditions; for heavy or interrupted cuts, pairing the grade and chipbreaker with appropriate feeds and rigidity is recommended. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
LNMX 160612 T9115 Wendeplatten - Tungaloy
High wear resistance and cutting-edge stability from the T9115 grade ensure consistent performance and extended tool life; the ISO LNMX160612 geometry with a 90° included angle provides reliable compatibility with standard turning holders. Order the insert directly via Metav Werkzeuge or consult the technical team for application-specific advice. LNMX160612 T9115 – LNMX ISO turning insert (Tungaloy) The LNMX160612 T9115 is a rectangular ISO-indexed turning insert designed to combine stable chip control with long-lasting cutting-edge performance in general turning operations. ISO 160612 format for predictable geometry Tungaloy T9115 grade for extended wear life 90° included angle for versatile turning 1.2 mm corner radius for consistent edge strength Dependable wear resistance for steady production The LNMX160612 T9115 belongs to a Tungaloy carbide grade engineered to balance wear resistance and toughness, so the cutting edge remains stable over extended cycles. As an indexable insert, it reduces changeover time: instead of re-sharpening, the plate can be indexed to a fresh edge, which supports higher overall productivity and lower process costs. The carbide body and T9115 specification mean fewer interruptions for tool changes and a more predictable service life in repetitive turning tasks. Optimised geometry for controlled chips and surface finish The insert’s geometry, featuring a corner radius 1.2 mm and a 90° included angle, is optimised to produce consistent chip formation and to support both semi-finishing and finishing passes. The design works in concert with the dedicated chipbreaker style to direct and break chips reliably; this prevents long, stringy swarf and helps maintain machine uptime. Reliable chip evacuation also contributes to a better surface quality on the workpiece and reduces the likelihood of built-up edge, especially under moderate cutting conditions. Clear guidance on holder compatibility and setup Compatibility with clamping systems is determined by the insert’s form, clearance angle, tolerance class, fastening method, size and thickness. The insert requires a matching holder, appropriate shim or clamp set and the correct fastening screws for secure seating. Correct seating geometry ensures the specified cutting angles are maintained, which stabilises cutting forces and reduces vibration. For complex setups or unusual toolholders, Metav Werkzeuge’s consultants can advise on suitable holders and clamping components to ensure efficient integration into existing tool systems. Application focus and selection advice for turning tasks Intended for general turning, the plate performs best when the T9115 grade and chipbreaker are selected to match the workpiece material, cut depth and machine stability. For roughing, choose geometries and feeds that leverage the grade’s toughness; for finishing, the same insert can deliver improved surface quality when paired with smaller depths of cut and appropriate feeds. The ISO format facilitates straightforward replacement and inventory management, supporting lean toolroom practices and consistent production outcomes. For precision turning with Tungaloy’s T9115 grade, contact Metav Werkzeuge for supply and tailored technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6861519-Tungaloy Manufacturer article number: 6861519 Manufacturer SKU: TUN6861519 Designation: LNMX160612 T9115 Core specifications Corner radius: 1.2 mm Clearance angle: 0° Included angle: 90° Plate thickness: 6.35 mm Plate size: 16 mm Shape: rectangular Materials & special features Material: carbide Grade/coating: T9115 Application: turning Chipbreaker: special Hole style: special ISO series: ISO turning indexable inserts Compatibility determined by form, clearance, tolerance class, fastening, size and thickness FAQ What is the primary use of this insert? The LNMX160612 T9115 is an indexable turning insert from Tungaloy intended for general turning; its geometry and grade make it suitable for a range of semi-finishing to finishing operations when the correct chipbreaker is selected. How does the T9115 grade affect performance? Tungaloy’s T9115 grade provides a balance of wear resistance and toughness, improving edge stability and extending the usable life of the insert under steady turning conditions. Which holders will work with this insert? Compatibility depends on the holder’s form, clearance angle, tolerance class, fastening method, size and the insert thickness; matching these parameters ensures secure clamping and correct cutting geometry. What advantages does the 1.2 mm corner radius offer? A 1.2 mm corner radius improves edge strength and contributes to a consistent surface finish, especially useful in situations requiring modest depths of cut and where tool robustness is needed. Is this an indexable insert and how does indexing help? Yes, the LNMX160612 is an indexable insert; indexing allows rotation of the plate to a fresh cutting edge, reducing downtime and tooling cost compared with regrinding solid tools. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com