LNMX 160612 T9115 Wendeplatten - Tungaloy
Benefit from the combination of Tungaloy's wear-resistant grade and precise ISO geometry for stable cutting and predictable tool life; the 1.2 mm corner radius and robust carbide substrate ensure consistent results in external and internal turning. Order the LNMX160612 T9115 insert directly via Metav Werkzeuge or ask our consultants if needed LNMX160612 T9115 — Tungaloy indexable turning insert, rectangular, 90° A LNMX160612 T9115 indexable turning insert engineered for general turning applications, offering a balance of wear resistance and toughness for stable cutting performance in ISO-compliant systems Tungaloy T9115 carbide grade Rectangular insert, 16 mm size 1.2 mm corner radius for strength Compatible with ISO turning holders Reliable cutting performance for consistent production The indexable turning insert delivers a dependable mix of abrasion resistance and toughness thanks to the T9115 cutting grade, which is formulated to complement the insert geometry. The combination of a solid carbide substrate and the specified grade reduces flank wear and supports predictable tool life, resulting in fewer unscheduled changes. Designed with a 1.2 mm corner radius, the insert offers improved edge strength for interrupted cuts and demanding engagement, while the rectangular format provides a stable seating in compatible holders for repeatable results. Easy integration into ISO turning tool systems Compatibility is defined by the insert's form, clearance angle, tolerance class, fastening method, size and thickness; this ISO-conformant geometry simplifies selection and replacement in existing toolchains. The 6.35 mm plate thickness and the nominal 16 mm length ensure a secure fit in standard clamping systems, while the special hole style allows for specific holder interfaces where required. Clear information on these dimensions supports rapid setup and reduces machine downtime during index changes. Optimised wear behaviour and chip control The cutting-grade choice enhances wear resistance without sacrificing edge integrity, making the insert suitable for varying turning operations. The grade complements the insert’s geometry to promote controlled chip formation and maintain surface quality over longer tool life. Where chip control is critical, the option to pair this insert with an appropriate chipbreaker or holder geometry helps maintain productivity and reduces cycle-time variability, contributing to a more economical machining process. Practical handling and productivity benefits As an indexable insert, routine maintenance is simplified: worn corners can be rotated or replaced quickly, lowering service intervals and raising overall equipment effectiveness. The robust edge stability of this design supports higher process reliability, helping to avoid scrap and rework. Together with ISO-standard dimensions and the proven Tungaloy grade, the insert supports consistent batch-to-batch performance and contributes to measurable gains in shop-floor efficiency. Contact Metav Werkzeuge for advice on holder compatibility or request the LNMX160612 T9115 to integrate Tungaloy's balanced grade into production workflows Technical Data Article number: 6861538 SKU: 6861538-Tungaloy Manufacturer SKU: TUN6861538 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Grade: T9115 Plate designation: LNMX160612 Plate form: rechteckig Plate size: 16 Plate thickness: 6,35 Corner radius: 1.2 Clearance angle: 0° Hole: Sonder Hole style: Sonder Facts Application: Drehen System: ISO turning insert system Typical use: external and internal turning Compatibility criteria: form, clearance angle, tolerance class, fastening, size, thickness Range: ISO-standard inserts for turning Special features Carbide substrate with Tungaloy grade Balanced wear resistance and toughness Suitable for holders with special hole interfaces Indexable design for quick rotation or replacement FAQ What cutting tasks is this insert intended for? The LNMX160612 T9115 indexable turning insert is intended for external and internal turning tasks where a balance of wear resistance and edge stability is required. How does one ensure compatibility with a toolholder? Compatibility depends on insert form, clearance angle, tolerance class, fastening, size and thickness; verify that the holder accepts a rectangular ISO insert with 16 mm dimension and 6.35 mm thickness. Can the insert withstand interrupted cuts? The 1.2 mm corner radius and the T9115 grade enhance edge strength, making the insert suitable for interrupted engagement and fluctuating cut conditions. Is the insert suitable for a wide range of materials? The T9115 grade is developed to complement the insert geometry with a balance of wear resistance and toughness, enabling use across a broad scope of turning operations; select an appropriate chipbreaker and cutting parameters for specific workpieces. How is the insert maintained during production? The indexable design permits rapid corner indexing or replacement, minimising downtime and simplifying maintenance routines for continuous production. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
LNMX 160612 T9125 Wendeplatten - Tungaloy
Combining the T9125 grade's wear resistance with a 1.2 mm corner radius and ISO conformity ensures reliable edge stability and consistent surface quality in turning operations; order the insert via Metav Werkzeuge or consult our specialists for application-specific recommendations. LNMX160612 T9125 ISO indexable turning insert, rectangular, 1.2 mm radius — Tungaloy LNMX160612 T9125 is an ISO-indexable turning insert designed for external and internal turning; it pairs a robust Tungaloy grade with a rectangular geometry for stable cutting and predictable tool life. ISO-indexable format for easy replacement Tungaloy T9125 grade for wear resistance 1.2 mm corner radius for robust edge strength Rectangular 16 mm size with 6.35 mm thickness Maximise process reliability and tool life The LNMX160612 T9125 insert is engineered around the T9125 cutting grade and a cemented carbide substrate to deliver balanced wear resistance and edge stability. This composition extends usable life under many turning conditions, reducing unplanned tool changes and supporting a more predictable production rhythm. With a design focused on controlled wear, the insert enables longer intervals between regrinds or replacements, contributing directly to lower downtime and improved overall equipment effectiveness. Straightforward integration with ISO tool systems As an ISO-conforming indexable plate, compatibility depends on form, clearance angle, tolerance class, clamping and plate dimensions. The insert features a 0° relief angle, 16 mm nominal size and 6.35 mm plate thickness, together with a rectangular shape and a special hole style. These precise dimensions make it straightforward to match the insert with the correct holder, shim and clamping set; installers benefit from rapid changeover and simplified inventory management, which shortens set-up times and reduces the risk of assembly errors. Controlled cutting and surface quality for turning operations A corner radius 1.2 mm provides a robust cutting edge that supports higher feed rates while maintaining a consistent surface finish. When paired with an appropriate chipbreaker, the insert delivers reliable chip control, which aids thermal stability and tool life. The system approach — insert, dedicated holder or bar, shim/clamp and replacement screws — allows process optimisation for both roughing and finishing passes. The result is enhanced productivity and reproducible part quality, even in variable batch production or demanding turning tasks. Contact Metav Werkzeuge for application advice on Tungaloy turning inserts (LNMX160612 T9125); technical data and stock information are available via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6861539 SKU: 6861539-Tungaloy Manufacturer SKU: TUN6861539 Brand: Tungaloy ISO designation: LNMX160612 Facts Corner radius: 1.2 mm Plate thickness: 6.35 mm Plate size: 16 mm Relief angle: 0° Included angle: 90° Materials & special features Material: cemented carbide Grade: T9125 Shape: rectangular Hole style: special Chipbreaker: special Intended use: turning (external and internal) System components: insert, holder, shim/clamp, replacement screws FAQ Is this insert suitable for both external and internal turning? Yes. The LNMX160612 T9125 insert is intended for external and internal turning; selection of the correct chipbreaker and mounting stability completes the application set-up. Which characteristics define the T9125 grade? The T9125 grade combines balanced wear resistance and toughness to support stable cutting and good edge life; the grade complements the insert geometry for consistent performance in turning tasks. How is compatibility with a holder determined? Compatibility depends on form, relief angle, tolerance class, clamping, size and thickness; the LNMX160612 designation and the listed dimensions should be matched to the corresponding holder and shim. When should the insert be indexed or replaced? Index the plate when edge wear affects surface finish, dimensional accuracy or cutting forces; the indexable design allows use of multiple cutting edges before full replacement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
LNMX 160612 T9125 Wendeplatten - Tungaloy
High wear resistance and edge stability combine with ISO conformity and robust plate geometry for consistent turning cycles. Benefit from the carbide grade's balance of toughness and abrasion resistance and order the insert directly via Metav Werkzeuge or consult our specialists for application guidance. LNMX160612 T9125 — ISO turning insert for turning, Tungaloy, carbide, 1.2 mm corner radius LNMX160612 T9125 is an ISO‑standard, rectangular turning insert designed for external and internal turning operations, offering a balanced combination of wear resistance and edge stability for a wide range of steels and engineering alloys ISO turning insert LNMX160612 Tungaloy grade T9125 for wear resistance 1.2 mm corner radius for robust edge 6.35 mm plate thickness for high stability Reliable performance that reduces downtime The LNMX160612 insert delivers a pragmatic performance profile: the Tungaloy T9125 carbide formulation provides a well‑balanced combination of wear resistance and toughness, which supports predictable tool life and consistent part quality. For production environments where stability matters, the 6.35 mm plate thickness and 1.2 mm corner radius reduce edge chipping and permit steady cutting parameters, resulting in fewer interruptions for insert changes and less unplanned downtime. This rational benefit translates into measurable productivity gains on serial turning tasks. Clear guidance on compatibility and mounting Compatibility with toolholders depends on geometry rather than brand: form, 0° clearance angle, tolerance class, fastening style, overall size and plate thickness determine whether an insert fits a specific holder. The ISO designation simplifies selection because the insert conforms to standard envelopes, making it straightforward to match to an external turning holder or a boring bar, and to ensure correct seating with the appropriate shim or clamp set. Understanding these factors avoids mismatches that otherwise cause assembly errors or poor cutting stability. Why the T9125 grade matters for turning The T9125 grade is engineered by Tungaloy to balance abrasive wear resistance with sufficient fracture toughness, which is particularly useful when machining mixed batches or interrupted cuts. The grade complements the insert geometry by maintaining a stable cutting edge across a range of steels and alloyed materials, helping to achieve uniform surface finish without aggressive parameter trimming. When surface quality and repeatable tool life are priorities, the combination of insert form and T9125 chemistry provides a reliable, cost‑effective solution. Practical system benefits in daily workshop use The insert is intended as part of an ISO system: the complete setup comprises the indexable plate plus a matched external holder or boring bar, appropriate underlay or clamping set and spare screws. This system approach simplifies inventory management and spare part replacement while ensuring secure fixation and repeatable seating. The rectangular shape and the special hole and chipbreaker styles noted for this item support specific turning strategies, especially where chip control and clamping stability are required, improving operator confidence during setup and reducing cycle variability. Contact Metav Werkzeuge for application advice, availability and to request batch or stocking information for the LNMX160612 T9125 insert; technical consultants are available by e‑mail or phone to assist with holder selection and process optimisation Technical data Article number: 6861588 Manufacturer SKU: TUN6861588 Model series: ISO turning indexable inserts Facts Plate designation: LNMX160612 Grade: T9125 Material: carbide Plate thickness: 6.35 mm Corner radius: 1.2 mm Clearance angle: 0° Plate size: 16 mm Angle: 90° Special features Rectangular plate geometry Special hole style (Sonder) Special chipbreaker (Sonder) System composition: insert, matched holder or boring bar, shim/clip and replacement screws Intended application: external and internal turning FAQ What materials is this insert suited for? The LNMX160612 T9125 insert is intended for turning and is optimised for steels and a broad range of engineering alloys, with the T9125 grade tailored for enhanced wear resistance and edge stability. How does the 0° clearance angle affect use? A 0° clearance angle influences the insert geometry and seating; it must be matched with a compatible holder form and setup to ensure correct cutting action and stable contact conditions for turning operations. Can this insert be used in internal turning/bore work? Yes, the LNMX160612 is suitable for both external and internal turning when paired with the appropriate boring bar and clamping components as part of the ISO system. What should be considered when choosing a chipbreaker? Select the chipbreaker style to match workpiece material and cutting conditions; this insert has a special chipbreaker option, so choose the variant that provides optimal chip control and surface finish for the intended application. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
LNMX 160612 T9125 Wendeplatten - Tungaloy
The combination of the Tungaloy T9125 carbide grade and a 1.2 mm corner radius provides sustained edge stability and enhanced wear resistance for demanding turning tasks. The ISO LNMX form and 6.35 mm plate thickness deliver the rigidity and holder compatibility required for reliable production. Order directly via Metav Werkzeuge or consult the technical team for application-specific guidance. LNMX160612 T9125 — ISO turning insert for turning | Tungaloy The LNMX160612 T9125 is an ISO-standard rectangular turning insert intended for external and internal turning, designed to match LNMX-format holders with a 0° relief and 6.35 mm plate thickness. Tungaloy grade T9125 for wear resistance 1.2 mm corner radius for robust edge strength ISO LNMX form for broad holder compatibility 6.35 mm plate thickness for increased rigidity High-performance carbide grade for consistent machining The LNMX160612 T9125 insert pairs a dedicated Tungaloy carbide grade with geometry that balances hardness and toughness. The T9125 grade is formulated to deliver improved wear resistance while retaining sufficient substrate toughness to resist chipping under interrupted cuts. For turning applications this results in longer tool life, fewer insert changes and a steadier surface finish—advantages that reduce downtime and contribute to predictable cycle times on CNC lathes. The combination of grade and geometry is particularly suitable where stability and repeatable performance are required. ISO form and system compatibility reduce setup time Compatibility with toolholders is governed by form, 0° relief, tolerance class, fastening method, size and thickness. The ISO-designation and LNMX form mean the insert fits a wide range of standard LNMX holders; nevertheless, holder selection must match the insert’s 6.35 mm thickness and rectangular shape. The relief angle of 0° indicates a neutral clearance suited to many turning setups, but the correct tolerance class and clamping arrangement must be confirmed to ensure stable seating. Clear separation of system elements—insert, matching external holder or boring bar, backing/clamping set and replacement screws—simplifies procurement and reduces assembly errors. Design features that improve process reliability A 1.2 mm corner radius offers a balance between edge strength and achievable surface finish: the larger radius increases resistance to edge breakdown and improves vibration damping, while still enabling satisfactory profile detail in many turning operations. The 6.35 mm plate thickness enhances rigidity, lowering deflection in heavy cuts and improving dimensional consistency. The insert’s rectangular form and the presence of a special hole and special chipbreaker (as supplied) allow adaptation to particular chip control requirements; selecting the appropriate chipbreaker and grade combination according to workpiece material and machining stability optimises cutting forces and thermal loading. Overall, the geometry and grade selection support reliable, repeatable machining and fewer unplanned tool changes. Contact Metav Werkzeuge for tailored holder recommendations and order the Tungaloy LNMX160612 T9125 insert to secure stable, long-lasting turning performance; technical consultants are available at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6861503 Manufacturer SKU: TUN6861503 SKU: 6861503-Tungaloy Model series: ISO turning inserts Core specifications Corner radius: 1.2 mm Relief angle: 0° Included angle: 90° Thickness: 6.35 mm Size: 16 mm Design & features Shape: rectangular Material: carbide Grade: T9125 (Tungaloy) Hole style: special Chipbreaker: special Application: turning System composition: insert, holder, backing/clamping set, replacement screws FAQ Which workpieces is this insert suitable for? The Tungaloy LNMX160612 T9125 insert is engineered for a wide range of turning tasks; the T9125 grade emphasises wear resistance and edge stability, so chipbreaker choice should be matched to the specific workpiece material and cutting conditions. How is compatibility with a holder determined? Compatibility depends on the insert form (LNMX), 0° relief, tolerance class, fastening method, size (16 mm) and thickness (6.35 mm); confirmation of these parameters against the holder specification ensures proper seating and clamping. What benefits does the T9125 grade provide? The T9125 carbide grade enhances abrasion resistance while maintaining sufficient toughness to resist chipping, resulting in longer insert life and more consistent surface finishes during turning. Can the insert be used for internal turning? Yes; the rectangular LNMX form and available chipbreaker options allow application in both external and internal turning when paired with an appropriate boring bar or internal holder. What role does the 1.2 mm corner radius play? A 1.2 mm corner radius increases edge strength and reduces the likelihood of chipping under heavier cuts, contributing to process stability and improved tool life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
LNMX 160612 T9125 Wendeplatten - Tungaloy
Take advantage of the combination of a purpose‑built Tungaloy grade, robust carbide construction and a precise 1.2 mm corner radius for reliable turning performance; order the inserts directly via Metav Werkzeuge or consult the Metav team for holder compatibility and process support. LNMX 160612 T9125 — Tungaloy indexable insert for turning, 1.2 mm radius, 90° The LNMX160612 T9125 is an ISO‑standard rectangular indexable insert designed for general external and internal turning, offering a balanced mix of wear resistance and edge stability for productive metalcutting. Tungaloy T9125 grade for wear resistance Rectangular ISO LNMX 16 × 6.35 mm 1.2 mm corner radius for robust edge 0° relief angle for specific holder fits Faster, more predictable turning results through dedicated grade engineering The Tungaloy T9125 grade combines hardness and toughness to deliver consistent tool life under mixed cutting conditions. As an ISO‑compliant rectangular insert, the component supports predictable machining thanks to its defined geometry and controlled cutting edge behaviour. Choosing a grade tuned for turning reduces unplanned tool changes and improves cycle‑time stability, which in turn supports higher overall throughput and lower process variance. Compatibility and practical mounting: what to check for secure use Compatibility with a given holder depends on shape, relief angle, tolerance class, fastening, size and thickness. The LNMX‑format insert requires a matching rectangular pocket, a compatible clamping screw or clamp and a 6.35 mm plate thickness seating. The insert’s special hole and hole style are designed for secure clamping; verifying the holder match prevents misindexing and ensures repeatable seating and concentricity during external and internal turning operations. Edge geometry and chip control for cleaner surfaces and safer operation A 1.2 mm corner radius balances edge strength and surface finish: it stabilises the cutting edge under interrupted cuts while still enabling acceptable surface quality on general turning tasks. The insert’s designated chipbreaker style is listed as special, so selecting the right chip‑control variant for the workpiece material and depth of cut is essential. Correct pairing of feed, speed and chipbreaker helps to reduce built‑up edge, lowers cutting forces and improves swarf evacuation. Practical selection advice for shopfloor decision making When replacing or specifying inserts, consider the workpiece material and the intended operation: the carbide substrate and the T9125 grade suit a wide range of turning tasks where a balance of wear resistance and edge stability is required. For less experienced teams, match the insert with a holder that supports a 0° relief where stipulated and confirm seat thickness (6.35 mm) and insert size (16 mm) before production. This reduces setup time and the risk of incorrect mounting. Contact Metav Werkzeuge for application-specific advice on the Tungaloy LNMX160612 inserts and to confirm holder compatibility, material pairing and recommended cutting data Technical Data Article number: 6861521 Manufacturer SKU: TUN6861521 Our SKU: 6861521-Tungaloy Model series: ISO turning indexable inserts Designation: LNMX160612 Grade: T9125 Manufacturer: Tungaloy Core specifications Material: carbide Size: 16 mm Thickness: 6.35 mm Corner radius: 1.2 mm Lead/approach angle: 90° Relief angle: 0° Hole: special Special features Rectangular insert geometry Special chipbreaker ISO‑standard compatibility Intended use: turning Balanced wear resistance and edge stability FAQ What materials is this insert intended for? The LNMX160612 T9125 insert is specified for turning applications and its T9125 grade provides a compromise between wear resistance and toughness for a broad range of workpiece materials. How is the insert fixed in the holder? The insert features a special hole and hole style for secure clamping; a matching rectangular pocket and correct fastening elements are required to seat the insert reliably. What size and thickness must the holder accept? The insert is a 16 mm rectangular format with a plate thickness of 6.35 mm; holders should match these dimensions for correct seating and clamping. How does the 1.2 mm corner radius affect performance? A 1.2 mm corner radius improves edge stability under interrupted or heavier cuts while still allowing good surface quality on standard turning operations. Is the LNMX160612 compatible with ISO systems? Yes, the insert follows ISO turning insert conventions; compatibility is determined by the insert form, clearance angle, tolerance class, fastening and size. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
LNMX 160616 T9115 Wendeplatten - Tungaloy
Benefit from the combination of ISO compatibility, the T9115 Tungaloy grade and a 1.6 mm corner radius for consistent chip control and long cutting-edge stability; this insert supports efficient external and internal turning operations. Order the insert directly via Metav Werkzeuge or request compatibility advice from the consultants. LNMX 160616 T9115 ISO turning insert for turning (Tungaloy) The LNMX160616 T9115 is an ISO-format turning insert designed for versatile external and internal turning, combining a balanced cutting-material grade with a rectangular form for reliable machining performance. *ISO LNMX 160616 geometry, compatible holders *Tungaloy T9115 grade for balanced wear resistance *1.6 mm corner radius for controlled chip formation *6.35 mm thickness, rectangular insert with special hole Precision geometry for stable turning and predictable results The ISO geometry of this insert ensures consistent seating and repeatable results in suitable holders; the ISO form simplifies indexable-changeover and reduces setup variability. Thanks to the rectangular shape and a defined 0° clearance angle, the insert delivers a predictable contact zone and reduced vibration when paired with a correctly specified toolholder. For production environments this leads to more stable feeds and surface finishes, while the standardised format supports rapid insert replacement and minimises downtime. Cutting material and grade engineered for durability and edge integrity The combination of carbide substrate and the T9115 grade provides a balanced mix of wear resistance and toughness, supporting both moderate interrupted cuts and continuous finishing passes. The grade has been selected to complement the insert geometry, improving cutting-edge stability and extending time between index changes. The 1.6 mm corner radius reduces local stress at the cutting edge and helps to shape chips for easier evacuation, which is particularly beneficial in medium-duty turning where long tool life and consistent dimensional accuracy are priorities. System compatibility and practical application advice Compatibility with holders is determined by insert form, clearance angle, tolerance class, fastening method, size and thickness; the ISO designation facilitates selection of suitable external or internal holders and clamping kits. The insert’s special hole and chipbreaker style require the corresponding clamp and screw arrangement to achieve the rated performance. When integrating into an existing tool system, select a holder rated for the LNMX geometry and verify that the clamp aligns with the special hole style to secure correct seating and torque distribution. For a precise recommendation tailored to the specific workpiece material and machining parameters, contact Metav Werkzeuge and request assistance for tool holder matching and machining data. Technical data Article number: 6861505 Manufacturer SKU: TUN6861505 Our SKU: 6861505-Tungaloy Model series: ISO turning inserts Name: LNMX160616 T9115 Tungaloy turning insert Facts Size: 16 mm Thickness: 6.35 mm Corner radius: 1.6 mm Clearance angle: 0° Insert angle: 90° Material: carbide Special features Grade: T9115 (Tungaloy) Rectangular insert form Special hole and special hole style Intended application: turning (external and internal) System: ISO-format insert requiring compatible holder, clamp and screw FAQ What workpiece materials is this insert suitable for? The T9115 grade is formulated to offer a balanced performance across a wide range of steels and common engineering materials; the LNMX160616 insert from Tungaloy is therefore suitable for general-purpose turning where a compromise between wear resistance and toughness is needed. How is holder compatibility ensured for this ISO insert? Compatibility depends on the ISO form, clearance angle, tolerance class, fastening type, size and thickness; selecting a holder designed for LNMX 160616 geometry and the special-hole clamp arrangement ensures correct seating and secure clamping. What advantage does the 1.6 mm corner radius provide? A 1.6 mm corner radius increases cutting-edge strength, reduces chipping risk on interrupted cuts and helps to generate chips that are easier to control, which improves surface finish and tool life in many turning operations. Is the insert suitable for finishing as well as roughing? The insert’s combination of the T9115 grade and its geometry allows use in both finishing and medium roughing, provided cutting data and toolholder rigidity are adapted to the operation and workpiece material. Which SKU and article number should be quoted when ordering? Quote article number 6861505 or manufacturer SKU TUN6861505 for the LNMX160616 T9115 turning insert to ensure the correct Tungaloy part is supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
LNMX 160616 T9115 Wendeplatten - Tungaloy
Take advantage of the proven combination of the T9115 cutting grade, robust cemented carbide substrate and a 1.6 mm corner radius to ensure consistent chip control and extended edge life in ISO-standard turning. Order the LNMX160616 insert directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. LNMX160616 T9115 – Indexable turning insert, cemented carbide, 1.6 mm radius (Tungaloy) A LNMX160616 indexable turning insert designed for ISO-compliant external and internal turning, providing a balance of wear resistance and edge stability for production machining. T9115 grade for wear-resistant performance 1.6 mm corner radius for secure edge strength ISO LNMX geometry for wide holder compatibility 6.35 mm thickness for stable cutting conditions Predictable performance from a balanced cutting grade The LNMX160616 insert combines the T9115 cutting grade with a cemented carbide body to deliver a measured balance of wear resistance and toughness. This balance reduces unplanned tool changes and supports longer continuous cutting cycles, which improves overall machine utilisation. In practice, the selected grade is intended to withstand mixed-duty turning operations where a compromise between flank wear and chipping resistance is required. For users targeting steady cycle times, this insert offers a reliable, economic choice that contributes to consistent component quality and reduced tooling downtime. Secure seating and ISO compatibility for rapid set-up Compatibility with toolholders is defined by form, relief angle, tolerance class, clamping method, size and thickness; the ISO LNMX geometry ensures straightforward pairing with standard external and internal turning holders. The insert’s 6.35 mm thickness and rectangular shape provide a stable contact area under clamping, supporting repeatable positioning and reduced vibration. Clear identification of geometry and tolerance reduces set-up time and minimises subjective adjustments at the machine, helping to standardise processes across multiple operators and machines in a production environment. Application guidance: why radius and relief matter A 1.6 mm corner radius offers a compromise between edge strength and surface finish: a larger radius increases load-bearing capacity and reduces the risk of edge fracture, whereas a smaller radius favours finer surface finishes. The 0° relief angle and rectangular form suit general turning tasks where a neutral cutting geometry is preferred. For best results in external and internal turning, select a chipbreaker and feed combination matched to workpiece stability and material to optimise chip flow and avoid built-up edge. When machining unstable setups, prioritise the insert’s edge strength; in rigid conditions, the geometry supports higher feeds for improved productivity. Economic and process benefits for production environments Using a grade and geometry that match the application reduces total cost per component through fewer indexings and less scrap. The insert’s construction supports predictable wear patterns, simplifying tool management and inventory planning. With a robust substrate and the specified grade, process engineers can expect steady results across series production: improved surface consistency, longer tool life and lower frequency of interruptions. For situations requiring assessment of chip control or optimisation of cutting data, Metav Werkzeuge can provide technical advice and cutting-parameter guidance to align the tool selection with production goals. For durable, productive turning with Tungaloy’s T9115 grade, contact Metav Werkzeuge for tailored application advice and immediate availability: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: 6861540 SKU: 6861540-Tungaloy Manufacturer SKU: TUN6861540 Designation: LNMX160616 Grade: T9115 Numerical data Corner radius: 1.6 mm Thickness: 6.35 mm Insert size: 16 mm Angle: 90° Relief angle: 0° Design & special features Material: cemented carbide Insert shape: rectangular Hole style: special Chipbreaker: special Series: ISO indexable turning inserts Application: turning FAQ Which machining tasks suit this insert best? The LNMX160616 T9115 insert is intended for ISO-standard external and internal turning, offering a general-purpose solution where a balance of wear resistance and edge stability is required. How is holder compatibility ensured for this geometry? Compatibility is determined by form, relief angle, tolerance class, clamping method, size and thickness; the ISO LNMX geometry of the LNMX160616 aligns with standard LNMX holders when these parameters match. What does the 1.6 mm corner radius mean for component quality? A 1.6 mm corner radius increases edge strength and reduces the risk of chipping, improving tool life in heavier cuts while also influencing the achievable surface finish. Is the T9115 a coating or a grade, and what does it provide? T9115 is a Tungaloy cutting grade combining wear resistance, toughness and stable cutting-edge behaviour, optimised for general turning applications. Can this insert be used for internal turning operations? Yes, the insert is suitable for both external and internal turning when paired with an appropriate ISO-compatible holder and a chipbreaker matched to the workpiece and stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
LNMX 160616 T9125 Wendeplatten - Tungaloy
Benefit from a combination of wear-resistant T9125 grade and a carbide substrate for stable cutting edges and consistent turning performance; the ISO compatibility ensures straightforward integration into standard holder systems. Order or request advice via Metav Werkzeuge for reliable delivery and technical guidance. LNMX 160616 T9125 indexable turning insert by Tungaloy — ISO turning insert for general turning A LNMX160616 T9125 indexable turning insert designed for ISO-format holders, offering a balanced grade for wear resistance and edge stability in conventional turning operations. ISO-format LNMX insert for standard holders Tungaloy T9125 grade for wear resistance Carbide substrate for robust cutting edge 0° clearance angle for versatile turning Engineered for consistent, productive turning The insert is built to provide reproducible results in standard turning tasks. The combination of an ISO-compatible geometry and a carbide substrate delivers high dimensional consistency, while the T9125 grade offers a balance of wear resistance and toughness that supports longer tool life under fluctuating cutting conditions. With a corner radius of 1.6 mm and a 0° clearance angle, the insert is suitable for general external and internal turning where edge stability and predictable tool behaviour increase uptime and reduce rework. The specification emphasises reliable machining performance, enabling cost-effective production cycles and less frequent index changes. Choose the correct chipbreaker and grade to match the component Selecting the appropriate chipbreaker and grade is essential for maximising productivity and surface finish. The insert’s grade is intended to be paired with a chipbreaker that matches the workpiece material and the machine–workpiece setup: stable setups benefit from grades that favour wear resistance, while less rigid conditions may require tougher grades to resist edge chipping. This approach reduces the risk of unexpected tool failure and improves process reliability. For mixed or unknown materials, opting for a balanced chip control solution and monitoring cutting parameters allows steady metal removal rates with consistent surface quality. System compatibility and secure mounting for repeatable results Compatibility with the toolholder is defined by form, clearance angle, tolerance class, fastening, size and thickness; using the correct holder and clamping components is crucial for process stability. The insert integrates into a system comprising an ISO turning plate, a matched outer holder or boring bar, and a suitable shim/clamp set with replacement screws. Key dimensions such as the 6.35 mm plate thickness, 16 mm nominal size and rectangular form must be respected when choosing the holder to ensure correct seat and clamping force. Proper mounting prevents movement under cutting loads, which in turn preserves the cutting edge and supports repeatable part quality. For professional turning with Tungaloy reliability, contact Metav Werkzeuge for availability and tailored technical advice by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6861559-Tungaloy Manufacturer item number: 6861559 Manufacturer SKU: TUN6861559 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Application: Drehen Brand: Tungaloy Facts ISO code: 160616 Corner radius: 1.6 mm Plate thickness: 6.35 mm Plate size: 16 mm Clearance angle: 0° Geometry angle: 90° Special features Rectangular plate form Hole: Special Hole style: Special Grade: T9125 (Tungaloy) Chipbreaker: Special System components: ISO insert, outer holder or boring bar, shim/clamp set, replacement screws Compatibility determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ What clamping components are required for mounting the insert? The LNMX160616 T9125 insert is mounted in an ISO-compatible holder and requires a matching shim or clamp set plus replacement screws; following holder specifications ensures correct seating and clamping. Which applications is this insert intended for? This Tungaloy indexable turning insert is intended for general external and internal turning operations and should be paired with a chipbreaker suited to the workpiece and machining stability. How does the T9125 grade affect cutting performance? The T9125 grade provides a balance of wear resistance and toughness, giving stable cutting-edge behaviour that extends effective tool life in typical turning scenarios. Are the plate dimensions critical for holder compatibility? Yes; the 16 mm plate size and 6.35 mm thickness must match the holder’s pocket and clamping geometry to ensure reliable performance with the LNMX160616 T9125 insert. Can the insert be used for lightweight, low-stability set-ups? For less rigid set-ups, the grade and chipbreaker choice should prioritise toughness and controlled chip formation; consult machining parameters to adapt cutting data for the intended stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
LNMX 160616 T9125 Wendeplatten - Tungaloy
Take advantage of the combination of T9125 wear resistance, robust edge stability and ISO-standard compatibility for consistent turning results. Order the LNMX160616 insert through Metav Werkzeuge or contact the consultants for application advice. LNMX 160616 T9125 indexable turning insert, 90° geometry — Tungaloy The LNMX 160616 T9125 is an ISO-standard, rectangular indexable insert designed for a wide range of turning operations; its geometry and grade balance wear resistance and toughness for productive metalcutting. ISO-compliant LNMX turning insert Tungaloy T9125 grade for wear resistance 90° cutting geometry for versatile turning 1.6 mm corner radius, 6.35 mm thickness Consistent removal rates and tool life through an optimised grade The LNMX series combines ISO conformity with a purpose-designed cutting grade to deliver predictable performance in turning applications. The T9125 carbide composition provides a calculated mix of wear resistance and toughness that helps maintain a sharp cutting edge over longer cycles; this translates into steady chip formation and reduced rework. Selecting an insert with these properties supports higher process efficiency and lower tool-change frequency, improving throughput without sacrificing surface integrity. Predictable set-up and repeatable clamping for accurate turning Compatibility with the toolholder is defined by form, 0° clearance, tolerance class, fastening method, size and 6.35 mm thickness. The 90° main cutting edge geometry offers straightforward alignment for both external and internal turning when used with the correct holder or boring bar. The special hole and hole style require the matching clamping kit and replacement screws as part of the system setup; when mounted correctly, the insert ensures repeatable positioning and minimises runout, supporting dimensional consistency across batches. Edge integrity and chip control tailored to application needs The 1.6 mm corner radius provides an advantageous compromise between edge strength and surface finish: it increases resistance to chipping while allowing adequate cutting edge definition for general finishing and medium-depth roughing. Chip control depends on the selected chipbreaker; the insert’s designation notes a special chipbreaker option, so the chipformer should be matched to workpiece material and machining conditions. In practical terms, this approach promotes stable cutting forces, improved machinability and the potential for longer tool life when process parameters are tuned accordingly. For reliable production with the Tungaloy T9125 grade, contact Metav Werkzeuge for availability and tailored technical guidance via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6861506 Manufacturer SKU: TUN6861506 Name: LNMX160616 T9125 Tungaloy-Wendeplatte Facts Corner radius: 1.6 mm Main angle: 90° Clearance angle: 0° Plate thickness: 6.35 mm Plate size: 16 mm Plate form: rectangular Special features Grade/coating: T9125 Cutting material: carbide Model series: ISO turning indexable inserts Application: Turning Hole: special Hole style: special Chipbreaker: special FAQ What is the intended application for this insert? The LNMX160616 T9125 indexable turning insert is intended for general external and internal turning operations where a balance of wear resistance and edge stability is required. Which holder features must match the insert to ensure compatibility? Compatibility depends on holder form, tolerance class, fastening method, clearance angle, plate size and thickness; matching those criteria ensures correct seating for the Tungaloy insert. How does the T9125 grade affect performance? The T9125 grade combines hardness and toughness suited to sustained cutting; in the LNMX insert it improves wear resistance and helps preserve cutting-edge stability during longer cycles. Is the corner radius suitable for finishing work? The 1.6 mm corner radius offers a compromise: it strengthens the cutting edge and still permits acceptable surface finishes for many finishing and medium-turning tasks when process parameters are set accordingly. Are special clamping parts required for this insert? The insert has a special hole and hole style; the correct underlay, clamping set and replacement screws must be used to achieve secure and repeatable clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
ONGU 0507AN AH120 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD‑coated AH120 carbide grade and an octagonal 05 format that delivers large chip volumes at small axial depths; order the ONGU0507AN directly via Metav Werkzeuge or consult our specialists for machining recommendations. ONGU0507AN AH120 Tungaloy indexable insert for high‑feed milling The ONGU0507AN AH120 is an octagonal, PVD‑coated carbide insert engineered for high‑feed milling, pocketing and face operations in the DoFeed family. High‑feed milling family design PVD‑coated AH120 carbide grade Octagonal 05 format with 135° angle Cylindrical hole with double countersink Raise material removal while keeping axial depth small The DoFeed series is tailored for high‑feed milling, enabling significantly higher material removal rates by using large chip volumes at very small axial engagements. This geometry reduces the required axial depth of cut while maintaining productivity, which is especially advantageous for pocketing and face machining where cycle times and tool life must be balanced. The design supports efficient chip evacuation and steady cutting conditions, helping to shorten machine time without compromising surface quality. Predictable cutting-edge stability and secure clamping The AH120 grade is a PVD‑coated carbide selected for its wear and chipping resistance where a sharp edge and process security are demanded. The insert’s 135° approach angle lowers cutting forces and spreads load across the cutting edge, improving stability in interrupted or heavy engagement passes. The octagonal format provides multiple usable edges per index, and the insert’s cylindrical hole with a double countersink (40°–60°) ensures positive, repeatable clamping in compatible cutter bodies. Together these features contribute to consistent part accuracy and prolonged edge life. Practical set‑up and application guidance for reliable results Installation as a system—milling body, matching inserts and fastening screws—ensures correct seating and repeatability across index changes. The insert is supplied in 05 size with a plate thickness of 7.94 mm and a corner radius of 0, offering a geometry suited to precise pocketing and planing tasks where edge definition is critical. The double‑sided chipbreaker gives controlled chip formation on both index positions, reducing the risk of edge fracture and easing disposal. Select cutter bodies that match the insert’s hole and countersink profile to achieve secure fastening and the expected process reliability. Contact Metav Werkzeuge today to specify the matching DoFeed holder or to request application advice for the Tungaloy ONGU0507AN AH120 indexable insert — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6735448 Manufacturer SKU: TUN6735448 Model series: DoFeed Insert designation: ONGU0507AN Core data Angle: 135° Plate thickness: 7.94 mm Format: 05 Corner radius: 0 Hole: with hole Hole style: cylindrical hole + double countersink (40°–60°) Special features PVD‑coated carbide AH120 Double‑sided chipbreaker Octagonal insert shape System components: milling body, matching inserts, screws Typical applications: high‑feed milling, pocketing, face milling FAQ Which operations are best for this insert? The ONGU0507AN AH120 Tungaloy indexable insert is optimised for high‑feed milling, pocketing and face machining where large chip removal is required at shallow axial depths. How does the AH120 grade affect tool life? The AH120 PVD‑coated carbide provides enhanced wear and chipping resistance, improving edge stability and extending service life under demanding milling conditions. What clamping interface is required? A milling body compatible with a cylindrical hole and a double countersink (40°–60°) is required to secure the insert reliably and to ensure repeatable positioning. How many cutting edges are available per insert? The octagonal 05 format offers multiple usable cutting edges through indexing, increasing economic edge usage compared with simpler geometries. Is this insert supplied as part of a system? Yes, the DoFeed concept is delivered as a system comprising the milling body, matching inserts and fastening screws for correct assembly and predictable results. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
ONGU 0507AN AH120 Wendeplatten - Tungaloy
Benefit from the combination of DoFeed high-feed geometry, PVD-coated AH120 wear resistance and an octagonal, double-sided form for reliable, high-throughput milling; order genuine Tungaloy inserts directly via Metav Werkzeuge or consult our specialists for process integration. ONGU 0507AN AH120 milling insert (DoFeed) by Tungaloy The ONGU0507AN AH120 is a PVD-coated carbide indexable insert designed for high-feed milling, pocketing and face milling where large chip volumes at small axial depths are required DoFeed high-feed geometry PVD-coated AH120 for wear resistance Octagonal, double-sided insert Cylindrical hole with countersink 40°–60° Increase material removal rates with high-feed geometry The DoFeed family is engineered for high-feed milling where the aim is to remove larger chip volumes while keeping axial engagement low. This strategy reduces the number of passes required for pocketing and planing operations, shortening cycle times and improving throughput in batch and single-piece production. The insert’s geometry promotes steady chip formation and stable cutting forces, which leads to more predictable machining behaviour and improved process reliability. Consistent edge life and process security from the AH120 grade The AH120 grade is a PVD-coated carbide formulated to resist wear and chipping under the demands of high-feed operations. The coating improves adhesion and abrasion resistance, helping to maintain a sharp cutting edge over longer intervals and reducing the frequency of index changes. For production environments that prioritise uptime and uniform surface quality, this grade supports consistent component finish and fewer interruptions for tool handling. Secure clamping and economical tool handling with octagonal design An octagonal shape combined with a double-sided chipbreaker increases the number of indexable edges per insert and optimises stock usage. The design includes a cylindrical hole with a double-sided countersink (40°–60°) to ensure secure, repeatable clamping in suitable milling cutters. With a thickness of 7.94 mm and a 135° included angle, the insert provides the mechanical stability required for productive milling of pockets and faces while offering simple rotation to fresh edges for prolonged service life. Contact Metav Werkzeuge for tailored application advice and to secure original Tungaloy ONGU inserts; phone +49 2822 7131930 or e-mail info@metav-werkzeuge.com Technical data Article number: 6735446 SKU: 6735446-Tungaloy Manufacturer SKU: TUN6735446 Model series: DoFeed Material: carbide Application: milling Insert designation: ONGU0507AN Grade/coating: AH120 (PVD-coated) Facts Angle: 135° Thickness: 7.94 mm Size: 05 Corner radius: 0 mm Clearance angle: 0° Countersink angle: 40°–60° Special features Octagonal, double-sided insert Double-sided chipbreaker Cylindrical hole with double-sided countersink PVD-coated AH120 grade High-feed DoFeed family Suitable for pocketing and face milling FAQ What applications suit this insert best? The ONGU0507AN AH120 insert by Tungaloy is intended for high-feed milling, including pocketing and face milling where large chip volumes at small axial depths are required. How does the AH120 grade improve tool life? The AH120 PVD-coated carbide grade provides enhanced wear resistance and chipping protection, giving the insert longer usable edge life in demanding high-feed operations. Can the octagonal shape reduce tooling costs? Yes, the octagonal form and double-sided design increase the number of indexable edges per insert, which helps to reduce tooling consumption and inventory footprint. What clamping features ensure repeatability? The insert’s cylindrical hole with a double-sided countersink (40°–60°) ensures secure, repeatable clamping in compatible milling bodies and contributes to stable cutting performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
ONGU 0507AN AH3135 Wendeplatten - Tungaloy
High-feed performance and a wear-resistant PVD-coated carbide grade deliver reliable chip removal with a consistently sharp cutting edge. Order the ONGU0507AN directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. ONGU 0507AN AH3135 Tungaloy indexable insert – High-feed milling (DoFeed series) A ONGU0507AN AH3135 indexable insert designed for high-feed milling and pocket or face operations, optimised for large chip volumes at low axial depths. DoFeed high-feed family for large chip volumes PVD-coated carbide grade AH3135 for process security Octagonal insert, 135° cutting angle, 7.94 mm thick Cylindrical hole with double-sided countersink 40°–60° Maximise material removal with minimal axial engagement The DoFeed series is engineered for productive high-feed milling, where large material removal rates are required with shallow axial cuts. The combination of a PVD-coated AH3135 carbide grade and the optimised geometry enables sustained cutting performance and reduced flank wear, which supports longer uninterrupted cycles. This results in improved process efficiency and more predictable tool life in pocketing and planing operations. Secure seating and improved chip control for stable processes The octagonal geometry and 135° cutting angle provide a stable cutting edge and favourable engagement angles that reduce vibration and promote even load distribution across the insert. The double-sided chipbreaker and cylindrical hole with double-sided countersink (40°–60°) are designed to improve chip control and clamping reliability. These features together contribute to consistent surface finish and reduced risk of edge chipping under interrupted cuts. Application flexibility and system integration for production environments As part of a system comprising the milling body, matching indexable inserts and fastening screws, this insert supports flexible set-ups for a range of milling tasks. The octagonal shape and 7.94 mm thickness offer multiple effective cutting edges, while the grade’s resistance to wear and chipping maintains a sharp cutting geometry where process security is a priority. Tungaloy’s DoFeed family is suitable for repetitive, high-throughput machining where predictable results and tool stability are essential. Contact Metav Werkzeuge today for tailored selection guidance on the Tungaloy DoFeed inserts and secure the ONGU0507AN AH3135 for high-productivity milling operations Technical data Article number: 6735447 SKU: 6735447-Tungaloy Manufacturer item number: TUN6735447 Model series: DoFeed Designation: ONGU0507AN Core data Thickness: 7.94 mm Size: 05 Cutting angle: 135° Corner radius: 0 mm Clearance angle: 0° Hole: with hole Special features Material: carbide Coating: PVD Grade: AH3135 Shape: octagonal Chipbreaker: double-sided Hole style: cylindrical hole with double-sided countersink (40°–60°) Typical applications: high-feed milling, pocketing, face milling System composition: milling body, matching indexable inserts and screws FAQ What applications are best for this insert? The ONGU0507AN AH3135 indexable insert from Tungaloy is intended for high-feed milling, including pocket and face milling where large chip volumes are required at low axial depths. Which geometry and size does the insert have? The insert is octagonal with a 135° cutting angle, size 05 and a thickness of 7.94 mm; it carries a cylindrical hole with a double-sided countersink 40°–60° for secure clamping. What advantages does the AH3135 grade provide? The AH3135 PVD-coated carbide offers enhanced wear and chipping resistance, maintaining a sharp cutting edge and contributing to process security during heavy material removal. Is the insert compatible with a system approach? Yes, the ONGU0507AN is supplied for use within the DoFeed system comprising the milling body, matching indexable inserts and fastening screws to enable reliable assembly and repeatable performance. What identifier can be used when ordering or enquiring? Refer to article number 6735447 or SKU 6735447-Tungaloy when enquiring about the ONGU0507AN AH3135 indexable insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
ONGU 0507AN AH3135 Wendeplatten - Tungaloy
A robust, PVD-coated carbide insert that combines the AH3135 grade’s wear and fracture resistance with an octagonal, double-sided design for economical, high-feed milling; order directly via Metav Werkzeuge or consult the technical team for specification support. ONGU0507AN AH3135 indexable insert DoFeed — high-feed milling, PVD-coated carbide by Tungaloy ONGU0507AN AH3135 is an octagonal PVD-coated carbide indexable insert designed for high-feed milling, optimised for large chip volumes at small axial depths in pocket and face milling applications DoFeed family: high-feed milling capability PVD-coated AH3135 for wear resistance Octagonal double-sided, reversible insert Cylindrical hole with 40°–60° countersink Maximise material removal with stable high-feed performance The DoFeed design enables a high material removal rate while keeping the axial cut low, which reduces cycle times without compromising surface quality. The combination of an octagonal form and double-sided geometry allows quick indexing and cost-effective use of the cutting edges, lowering tooling cost per part. For machining tasks such as pocketing and face milling, the insert’s geometry promotes consistent chip flow and machine load, resulting in predictable machining cycles and improved process efficiency. Long-lasting operation thanks to advanced grade and coating The AH3135 PVD-coated carbide grade is formulated for both wear resistance and edge strength, delivering a sharp cutting edge with enhanced fracture control under interrupted cuts. This balance of toughness and hardness provides process security in demanding milling regimes where stable cutting edges and repeatable performance are required. The coating reduces adhesion and flank wear, extending edge life and reducing the frequency of indexing or replacement in production settings. Secure clamping and easy handling reduce setup time Designed with a cylindrical hole and a double-sided countersink in the 40°–60° range, the insert ensures positive seating and uniform clamp force, which helps prevent movement under high-feed conditions. The 135° cutting angle and a plate thickness of 7.94 mm give mechanical stability at the tool pocket, while the octagonal shape offers multiple usable edges per insert. These features simplify tool changes and minimise non-productive time, supporting higher uptime on batch runs. Application guidance for reliable results in milling Optimised for high-feed milling, this insert performs well in pocket milling and face milling when the strategy calls for large time chip volumes at small axial depths. The tooling system comprises the milling body, matching indexable inserts and fastening screws for a complete solution. For best results, pair the insert with stable workholding and a suitable high-feed holder, monitor edge condition at regular intervals, and adjust feed rates to the rigidity of the machine and workpiece to maintain consistent surface integrity. Contact Metav Werkzeuge for availability and technical advice on the Tungaloy ONGU0507AN AH3135 DoFeed insert; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application-specific recommendations and delivery options Technical Data Article number: 6735445 SKU: 6735445-Tungaloy Manufacturer SKU: TUN6735445 Model series: DoFeed Facts Thickness: 7.94 mm Insert size: 05 Cutting angle: 135° Corner radius: 0 mm Relief angle: 0° Special features Shape: octagonal Coating: PVD-coated AH3135 carbide Chipbreaker: double-sided Hole: cylindrical with double-sided countersink 40°–60° Application: milling (high-feed, pocket and face milling) FAQ What is the intended application for this insert? This indexable insert, the ONGU0507AN AH3135 Tungaloy insert (SKU 6735445-Tungaloy), is intended for high-feed milling tasks such as pocket and face milling where large chip volumes are removed with small axial depths. Which material grade and coating does the insert use? The insert is supplied in the AH3135 grade with a PVD-coated carbide substrate, combining wear resistance and edge strength for process reliability. How does the octagonal design benefit production? The octagonal geometry provides multiple usable edges per insert and, together with the double-sided configuration, reduces tooling cost per edge and shortens downtime for indexing. Is the insert suitable for interrupted cuts and pocketing? Yes, the AH3135 grade and the insert’s fracture-resistant properties make it suitable for interrupted cuts encountered in pocketing and similar milling operations. What clamping features ensure secure seating? The insert features a cylindrical hole with a double-sided countersink (40°–60°), which ensures positive seating and uniform clamping force for stable performance under high-feed conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
ONGU 0507AN AH3225 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH3225 carbide for durable edge life and the DoFeed high‑feed design for large time‑chip volumes at small axial depths; the octagonal, double‑sided geometry further increases flexibility in production. Order the ONGU0507AN AH3225 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. ONGU 0507AN AH3225 — Tungaloy indexable insert for high‑feed milling, DoFeed series, PVD‑coated carbide The ONGU0507AN AH3225 is an octagonal, PVD‑coated carbide indexable insert designed for DoFeed high‑feed milling, ideal for pocketing and face milling where high material removal with shallow axial engagement is required. DoFeed high‑feed milling family PVD-coated carbide AH3225 grade Octagonal, double-sided geometry Cylindrical hole with 40°–60° countersink Maximum metal removal with minimal axial depth for faster cycle times The DoFeed series is engineered to deliver high material removal rates while keeping axial depths small, which reduces machine load and allows higher feed per tooth. The octagonal, double‑sided insert geometry supports multiple indexed edges, improving tool utilisation and lowering tooling costs per part. The supplied insert is part of a system comprising the milling body, matching indexable inserts and fastening screws, enabling straightforward integration into existing DoFeed toolholders. Stable cutting edge and reduced risk of chipping for process security The AH3225 grade is a PVD‑coated carbide developed for wear and breakout resistance during milling; it combines a sharp cutting edge with process reliability when consistent surface quality and reproducible tool life are required. A sharp edge shortens cutting forces and improves surface finish, while the coating increases resistance to abrasive wear. This balance supports predictable tool changes and helps maintain stable production cycles. Practical geometry and clamping features that aid chip control and handling The insert’s octagonal form and double-sided chipbreaker provide consistent chip formation and evacuation during pocket and face milling operations. A cylindrical hole with a double‑sided countersink (40°–60°) simplifies clamping and ensures secure seating in the cutter body. The insert thickness of 7.94 mm and a 135° cutting angle contribute to robust seating and load distribution, which is especially useful when machining interrupted cuts or heavy engagement pockets. For Tungaloy performance in DoFeed high‑feed milling and expert advice on selecting the right insert geometry, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to request the ONGU0507AN AH3225 or technical consultation Technical data Article number: 6918338 Manufacturer SKU: TUN6918338 Material: Carbide Manufacturer: Tungaloy Facts Plate thickness: 7.94 mm Plate size: 05 Cutting angle: 135° Clearance angle: 0° Corner radius: 0 Design and special features Octagonal plate, double-sided Cylindrical hole with double-sided countersink (40°–60°) Double-sided chipbreaker PVD-coated grade AH3225 Series: DoFeed high‑feed milling FAQ What applications suit this insert best? The insert is intended for high‑feed milling applications such as pocketing and face milling; the ONGU0507AN AH3225 excels where large time‑chip volumes are required at small axial depths. Which material is the insert made from and what coating is applied? The ONGU0507AN is manufactured from carbide and features a PVD coating in the AH3225 grade for enhanced wear and chipping resistance. How is the insert secured in the milling cutter? The insert has a cylindrical hole with a double‑sided countersink (40°–60°) to ensure secure clamping in compatible DoFeed milling bodies and stable seating under cutting forces. How does the octagonal design benefit production? The octagonal, double‑sided design provides multiple usable edges per insert, improving tool economy and reducing downtime for index changes during production. What is the manufacturer SKU and article number for ordering? The article number is 6918338 and the manufacturer SKU is TUN6918338 for the ONGU0507AN AH3225 Tungaloy indexable insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
ONGU 0507AN AH3225 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH3225 carbide, octagonal geometry and the DoFeed high-feed concept for increased material removal with low axial depth — ideal for efficient pocketing and face milling. Order directly via Metav Werkzeuge or consult its specialists for integration into existing milling systems. ONGU 0507AN AH3225 — Indexable insert for high-feed milling, Tungaloy The ONGU0507AN AH3225 is an octagonal, PVD-coated carbide indexable insert designed for high-feed milling, especially suited to pocketing and face machining where large time-chip volumes are required. High-feed milling family PVD-coated carbide grade AH3225 Octagonal 05 geometry with central hole Double-sided chipbreaker and countersink Boosted productivity with the DoFeed high-feed concept The DoFeed series is engineered for high-feed milling, enabling large chip volumes at small axial depths. This insert from the DoFeed family delivers a tangible productivity gain by allowing elevated feed per tooth while keeping radial engagement moderate; the result is faster pocketing and face work with stable cutting forces. The 135° geometry supports a smooth entry and reduced impact on the cutting edge, making the system particularly effective for repetitive milling cycles and long production runs. Durable edge life through PVD-coated AH3225 grade The AH3225 grade is a PVD-coated carbide formulation optimised for resistance to wear and edge chipping. The coating and substrate combination provides a sharp, reliable cutting edge that maintains process security under varying conditions. For operations where a consistent chip shape and low risk of breakout are crucial, this grade offers a balance between adhesion resistance and fracture toughness, thereby reducing unplanned tool changes and improving overall machine uptime. Precise geometry and system-ready design for dependable clamping The insert features an octagonal 05 form with a plate thickness of 7.94 mm, a central cylindrical hole with a double-sided countersink (40°–60°) and a double-sided chipbreaker, enabling reuse of both faces. The design includes a 0 mm corner radius and a 0° clearance angle, providing a keen cutting outline for fine finishing when required. Integration into milling systems follows the standard DoFeed setup: the insert pairs with matching cutter bodies and fixing screws to ensure secure clamping and repeatable positioning during high-feed operations. For technical advice on applying the Tungaloy ONGU0507AN AH3225 insert, availability or to discuss compatibility with specific DoFeed milling bodies contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored support and ordering assistance Technical Data Article number: 6918342 Manufacturer SKU: TUN6918342 SKU: 6918342-Tungaloy Model series: DoFeed Product designation: ONGU0507AN AH3225 Material: Carbide Facts Plate size: 05 Plate thickness: 7.94 mm Insert geometry: octagonal Clearance angle: 0° Corner radius: 0 mm Included central hole: yes Features Grade/coating: PVD-coated AH3225 Hole style: cylindrical hole + double-sided countersink (40°–60°) Chipbreaker: double-sided Application: milling (high-feed, pocketing, face milling) System setup: insert, matching milling body and screws FAQ Which milling operations are best suited to this insert? The ONGU0507AN AH3225 insert is optimised for high-feed milling, especially pocketing and face milling where large time-chip volumes are desired while keeping axial depths small. What does the AH3225 grade provide? AH3225 is a PVD-coated carbide grade that combines wear resistance with fracture toughness, making the insert suitable when a sharp cutting edge and process security are both required. How is the insert fixed into a milling cutter? The insert fits DoFeed-style milling bodies and is secured via the central cylindrical hole and matching fixing screw; the double-sided countersink (40°–60°) supports stable clamping and repeatable positioning. Is the insert reversible or single-use per face? The octagonal shape and double-sided chipbreaker allow multiple usable edges; faces can be indexed to extend productive life before replacement. What are the key geometry details to consider when programming feeds? Important parameters include the 05 size, 7.94 mm thickness, 135° entry geometry and the intended small axial depth typical for high-feed strategies, which together guide selection of feed per tooth and cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
ONGU 0507AN T3225 Wendeplatten - Tungaloy
Combining the DoFeed high‑feed geometry with the T3225 carbide grade yields productive material removal and stable cutting edges for pocketing and face‑milling; the octagonal form and secure hole fixing promote repeatable seating and reduced downtime. Order the insert directly via Metav Werkzeuge or contact our consultants for integration advice. ONGU 0507AN T3225 DoFeed milling insert by Tungaloy — octagonal, with hole The ONGU0507AN T3225 is an indexable milling insert designed for high‑feed milling, ideal for productive pocketing and face operations within the DoFeed family. DoFeed high-feed geometry T3225 Tungaloy carbide grade Octagonal insert, 7.94 mm thickness Cylindrical hole with double countersink Faster pocketing and facing through high‑feed design The DoFeed series is engineered for large time‑volume chip removal at small axial depths, which permits higher feed per tooth while keeping radial engagement low. This reduces traversal time across pockets and faces and improves cycle efficiency; the result is shorter machining times without compromising stability. High‑feed operation also distributes cutting forces more evenly across the insert, which supports consistent surface finish during high‑volume runs. Robust seating and geometry for repeatable performance The octagonal insert form together with the cylindrical hole and double‑sided countersink (40°–60°) provides secure clamping and repeatable seating in the cutter body. At 7.94 mm thickness the insert offers increased support under load, and the 135° approach angle contributes to controlled chip flow and reduced radial cutting forces. These geometric features translate into reliable tool life and fewer indexings per job, which lowers handling time and improves overall productivity. T3225 carbide balance for wear resistance and edge stability The supplied Tungaloy grade T3225 is a cemented carbide formulation chosen to complement the DoFeed geometry with a balance of wear resistance, toughness and edge stability. That combination helps maintain cutting performance during pocketing and planar operations where interrupted cuts or variable feeds can occur. The insert is supplied as part of a system concept — cutter body, matching indexable inserts and fixing screws — enabling straightforward replacement and minimal setup time. Discuss integration of the Tungaloy DoFeed insert with Metav Werkzeuge for a tailored machining plan or a quotation — contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6749572 Manufacturer SKU: TUN6749572 Our SKU: 6749572-Tungaloy Model series: DoFeed Material: Cemented carbide Grade: T3225 Data Plate thickness: 7.94 mm Plate size: 05 Approach angle: 135° Corner radius: 0 mm Free angle: 0° Special features Octagonal plate form Cylindrical hole + double‑sided countersink (40°–60°) Double‑sided chipbreaker High‑feed family for large chip volumes at small axial depths System composition: milling body, matching indexable inserts, fixing screws Intended application: Milling (pocketing, facing) Insert designation: ONGU0507AN FAQ What milling tasks is this insert best suited for? The ONGU0507AN T3225 indexable milling insert is optimised for high‑feed milling, in particular pocketing and face‑milling operations within the DoFeed system. How does the T3225 grade affect tool life? The T3225 cemented carbide grade combines wear resistance and toughness to maintain edge stability under high‑volume removal, helping to extend usable insert life in continuous production. How is the insert secured in the cutter body? The octagonal insert is located via a cylindrical hole with a double‑sided countersink (40°–60°) and clamped with the matching fixing screws supplied as part of the system, ensuring repeatable seating. Can the ONGU0507AN handle interrupted cuts? Yes — the combination of the DoFeed geometry and the T3225 grade provides sufficient toughness and edge support for many interrupted‑cut scenarios encountered during pocketing. What components are needed to complete a cutter assembly? A matching DoFeed cutter body, the ONGU0507AN inserts and the appropriate fixing screws are required; the system is designed for quick insert replacement and minimal setup. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
ONGU0507AN 0507AN T1215 Wendeplatten - Tungaloy
ONGU 0507AN T1215 Wendeplatte Fräsen von Tungaloy ONGU0507AN T1215 ist eine Hochvorschub-Wendeplatte für produktives Fräsen und eignet sich besonders für Taschen- und Planbearbeitung bei kleinen axialen Zustellungen Hohe Produktivität bei kleinen axialen Zustellungen Stabile Spanbildung dank optimierter Geometrie Robuste Hartmetall-Sorte T1215 für lange Standzeit Octogonale Form ermöglicht beidseitige Nutzung Mit Loch und doppelseitiger Senkung für stabile Fixierung Überzeugende Leistung für Hochvorschub-Anwendungen Die DoFeed-Modellserie liefert gezielt hohe Zeitspanvolumina bei geringen axialen Zustellungen, wodurch die Bearbeitungszeit pro Bauteil deutlich sinkt. Die Kombination aus Hartmetall-Grundstoff und der speziellen T1215-Schneidstoffsorte sorgt für eine ausgewogene Balance aus Verschleißfestigkeit und Zähigkeit. Das Ergebnis ist eine konstante Schneidkante, die auch bei intensiver Nutzung längere Laufzeiten erlaubt und den Durchsatz in der Fertigung erhöht. Praktische Vorteile in der Anwendung und Bedienung Die octogonale Plattenform mit doppelseitigem Spanbrecher ermöglicht vielseitige Einsetzbarkeit und reduziert die Kosten pro Schneidkante durch beidseitige Indexierbarkeit. Die Plattenkonstruktion mit zylindrischem Loch und doppelseitiger Senkung (40°–60°) gewährleistet eine sichere Spannposition und reproduzierbare Ergebnisse bei hoher Schnittkraft. Für Anwender bedeutet das weniger Rüstzeiten, geringere Werkzeugkosten und verbesserte Prozesssicherheit beim Fräsen von Taschen und Planflächen. Zielgruppe, Einsatzbereich und Empfehlung Entwickelt für Anwender in der Serien- und Einzelfertigung, ist die Platte ideal für Betriebe, die produktive Hochvorschubstrategien verfolgen und eine breite Werkstoffabdeckung benötigen. Die ONGU0507AN zeichnet sich besonders bei Stahl- und Guss-ähnlichen Werkstoffen aus und bietet durch die robuste Sorte T1215 eine zuverlässige Performance bei wechselnden Schnittbedingungen. Wartungsfreundliche Geometrien und die klare Systemintegration mit Fräskörpern vereinfachen die Prozesse im Fertigungsalltag. Empfehlung: Die ONGU0507AN mit T1215-Sorte direkt über Metav Werkzeuge beziehen; technische Beratung und Bestellhilfe per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 6747243 Marke: Tungaloy Serie: DoFeed Bezeichnung: ONGU0507AN Hersteller SKU: TUN6747243 Händler SKU: 6747243-Tungaloy Anwendung: Fräsen Fakten Plattendicke: 7,94 Winkel: 135° Plattengröße: 05 Eckenradius: 0 Freiwinkel: 0° Besonderheiten Material: Hartmetall Plattenform: octogonal Loch: mit Loch Lochstil: zylindrisches Loch + doppelseitige Senkung (40°–60°) Sorte/Beschichtung: T1215 Spanbrecher: doppelseitig Schneidstofftyp: Tungaloy-Schneidstoffsorte Systemaufbau: Fräskörper, passende Wendeschneidplatten und Schrauben Einsatz: Hochvorschub-Fräsfamilie für große Zeitspanvolumina bei kleinen axialen Zustellungen Typische Anwendung: Hochvorschubfräsen, Taschen- und Planbearbeitung FAQ Welche Vorteile bietet die ONGU0507AN T1215 gegenüber Standardplatten? Die ONGU0507AN T1215 von Tungaloy kombiniert eine hochproduktive Geometrie mit der verschleißfesten T1215-Sorte, was zu längeren Standzeiten und stabiler Spanbildung bei Hochvorschub-Fräsoperationen führt. Für welche Werkstoffe ist die Wendeplatte geeignet? Die Wendeplatte ist für das Fräsen ausgelegt und zeigt besonders gute Ergebnisse bei Stahl-ähnlichen Werkstoffen; die T1215-Sorte wurde für eine breite Werkstoffabdeckung entwickelt. Wie beeinflusst die octogonale Form die Wirtschaftlichkeit? Die octogonale Form erlaubt beidseitige Nutzung der Plattenkanten, wodurch die Kosten pro Schneidkante sinken und die Wirtschaftlichkeit im Serienbetrieb steigt. Welche Besonderheiten besitzt die Spannbohrung? Die Platte verfügt über ein zylindrisches Loch mit doppelseitiger Senkung (40°–60°), was eine sichere und reproduzierbare Befestigung am Fräskörper ermöglicht. Welche Artikelnummer und SKU gehören zur Platte? Die Artikelnummer lautet 6747243, die Hersteller-SKU ist TUN6747243 und die Händler-SKU ist 6747243-Tungaloy. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ONHU 0705AN AH120 Wendeplatten - Tungaloy
Benefit from the combination of PVD-coated AH120 carbide, DoFeed high-feed geometry and an octagonal form with secure hole fixing for stable, high-throughput milling; order the ONHU 0705AN AH120 insert directly via Metav Werkzeuge or consult our advisors for application support. ONHU 0705AN AH120 indexable insert for milling — Tungaloy DoFeed, PVD-coated The ONHU 0705AN AH120 is an octagonal indexable insert developed for high-feed milling, particularly for pocketing and face operations where large chip volumes are required with small axial depths. DoFeed high-feed geometry for large chip volume PVD-coated AH120 for wear and breakout resistance Octagonal form with 135° included angle Cylindrical hole with 40°–60° countersink Optimised high-feed performance for efficient machining The DoFeed family was created to increase material removal rates while keeping the axial engagement low. This insert combines a sharp cutting edge with the AH120 PVD-coated carbide grade to deliver consistent performance in demanding high-feed milling tasks. The coating enhances wear resistance and reduces the risk of edge chipping under intermittent loads, translating directly into longer tool life and fewer interruptions to production. For shops focused on throughput, the geometry supports larger time-chip volumes without sacrificing surface quality. Consistent chip control and reliable seating for stable processes An octagonal plate form with a central fixing and a cylindrical hole plus double-sided countersink (40°–60°) ensures stable clamping in compatible milling bodies. The double-sided chipbreaker design promotes predictable chip formation and evacuation, which reduces re-cutting and heat concentration at the cutting edge. Combined with the 135° included angle and a plate thickness of 5.56 mm, the insert offers mechanical robustness and repeatable seating, supporting process security and reducing downtime caused by unexpected insert failures. Seamless integration into DoFeed systems and versatile applications The insert is supplied as part of a system comprising the milling body, matching indexable plates and fastening screws, enabling straightforward replacement and inventory management. Suitable for pocketing and face milling, the design delivers a balance between aggressive metal removal and controlled cutting forces. The PVD-coated grade is particularly useful where a sharp edge and resistance to breakout are required, offering a practical solution for shops seeking to elevate productivity with a proven system component. Contact Metav Werkzeuge for tailored application advice, availability of the ONHU 0705AN AH120 insert and recommendations for matching DoFeed bodies — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Manufacturer article number: 6861812 SKU: 6861812-Tungaloy Manufacturer SKU: TUN6861812 ISO designation: 0705AN Insert designation: ONHU0705AN Facts Thickness: 5.56 mm Included angle: 135° Insert size: 07 Corner radius: 0 mm Clearance angle: 0° Coating: AH120 (PVD) Material: Carbide Special features Octagonal plate form Double-sided chipbreaker With hole: cylindrical hole + double-sided countersink (40°–60°) PVD-coated carbide grade AH120 Model series: DoFeed — high-feed milling family Application: Milling (Fräsen) System build: insert for milling bodies with matching screws Sharp cutting edge for process security FAQ What applications is this insert intended for? The ONHU 0705AN AH120 insert is intended for high-feed milling tasks such as pocketing and face milling where large chip volumes are required with small axial depths. How does the AH120 grade improve tool life? The AH120 PVD-coated carbide grade provides enhanced wear resistance and resistance to chipping, which extends the service life of the insert under demanding milling conditions. Is the insert compatible with standard DoFeed bodies? The insert is part of the DoFeed system and is designed for use with compatible milling bodies and the corresponding fastening screws; ensure the body accepts the ONHU 0705AN geometry and central fixing. What benefits does the octagonal form offer? The octagonal form increases the number of indexable cutting edges and, when combined with secure central clamping, improves repeatability and reduces downtime for edge changes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
ONHU 0705AN AH120 Wendeplatten - Tungaloy
Benefit from the combination of high-feed geometry and a wear-resistant PVD grade: the insert delivers large time-material volumes with low axial engagement while keeping a sharp cutting edge and strong process reliability. The robust octagonal form and precise 135° geometry ensure repeatable pocketing and face-milling results. Order the insert directly via Metav Werkzeuge or consult the specialists for process parameters and availability. ONHU 0705AN AH120 octagonal milling insert for high-feed milling — Tungaloy DoFeed, PVD-coated The ONHU0705AN AH120 is an octagonal indexable milling insert engineered for high-feed milling, pocketing and face machining where large volume removal at small axial depths is required. DoFeed high-feed geometry for large removal rates PVD-coated AH120 grade for wear resistance Octagonal 07 form, 5.56 mm thickness Cylindrical hole with 40°–60° countersink High-feed geometry that raises productivity without added depth The DoFeed series is built to increase throughput by combining a specialised high-feed geometry with a stable cutting edge. The insert’s design enables large time-material volumes with only small axial engagements, which reduces the load on the spindle while maintaining high material removal per tooth. Thanks to the PVD-coated AH120 grade on a carbide substrate, the edge life is extended under continual operation and offers reliable performance for pocketing and planing tasks. This results in fewer indexings and steady cycle times, making the solution particularly suited to production environments focused on efficiency. Geometry optimised for consistent surface quality and chip control The octagonal form and the 135° primary geometry create a combination of multiple usable cutting edges and favourable cutting forces. A zero corner radius and a 0° clearance angle contribute to a predictable cutting action and repeatable part tolerances. The insert is equipped with a double-sided chipbreaker and a cylindrical hole with double-sided countersink (40°–60°) to support secure clamping and consistent chip evacuation. Together, these features reduce vibration and help maintain surface finish across pockets and large-area milling, so fewer reworks are required. System compatibility and material applications for practical use Supplied as part of a system comprising the milling body, matching indexable inserts and fixing screws, this insert integrates easily into existing DoFeed tool holders. The 0705AN size and 5.56 mm thickness provide clear dimensional standards for tool setup and fixture planning. The AH120 grade is developed for wear- and breakage-resistant performance, suitable for a wide range of milling tasks where a sharp edge and process security are required. Use with appropriate cutting data for steel and similar materials to exploit the insert’s economy and productivity advantages. For availability, cutting data recommendations and ordering of Tungaloy ONHU0705AN AH120 inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application-specific details. Technical Data Article number: 6861806 SKU: 6861806-Tungaloy Manufacturer SKU: TUN6861806 Brand: Tungaloy Model series: DoFeed Product designation: ONHU0705AN Grade: AH120 Material: Carbide Coating: PVD Facts Thickness: 5.56 mm Size: 07 Geometry angle: 135° Corner radius: 0 Clearance angle: 0° Hole style: Cylindrical hole + double-sided countersink (40°–60°) Special features Octagonal insert form Double-sided chipbreaker High-feed family for large time-material volumes at small axial depths Suitable for milling, pocketing and face operations System composed of milling body, matching inserts and screws FAQ What machining tasks is this insert best suited to? The ONHU0705AN AH120 indexable insert (Tungaloy, SKU 6861806-Tungaloy) is optimised for high-feed milling, pocketing and face-milling where high removal rates at low axial depths are required. How many usable cutting edges does the octagonal form provide? The octagonal shape offers multiple indexable edges; the exact number depends on the specific clamping and index strategy used with the DoFeed milling body. Is the AH120 grade suitable for interrupted cuts? The AH120 PVD-coated carbide grade is designed to be wear- and breakage-resistant, offering good process security under typical interrupted and continuous milling conditions. What clamping detail ensures correct seating of this insert? The insert has a cylindrical hole with a double-sided countersink (40°–60°), which supports secure clamping in the compatible DoFeed milling body and contributes to consistent positioning. Are there recommended workpiece materials for this insert? This insert is intended for general milling applications; when used with appropriate cutting data it is particularly effective on steels and similar materials where a sharp edge and process reliability are required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
ONHU 0705AN AH140 Wendeplatten - Tungaloy
Take advantage of the combination of the PVD-coated AH140 grade and the DoFeed high-feed geometry for stable chip formation and reliable process security; order the ONHU0705AN AH140 indexable insert directly via Metav Werkzeuge or consult our advisers for application-specific guidance. ONHU0705AN AH140 – Indexable insert for high-feed milling, PVD-coated carbide by Tungaloy ONHU0705AN AH140 is a high-feed milling indexable insert designed for pocketing and face milling with small axial depths and high material removal per pass. High-feed family for large chip volumes PVD-coated AH140; wear and chip resistant Octagonal plate; 135° cutting angle Cylindrical hole with double-sided countersink High-feed geometry that boosts productivity The DoFeed series combines an aggressive rake geometry with a low axial engagement to enable high material removal rates while maintaining a small depth of cut. The resulting high-feed milling strategy reduces cycle time and improves utilisation of machine hours. Thanks to the PVD-coated AH140 grade on a carbide substrate, the cutting edge retains sharpness under fluctuating loads, which supports consistent cutting forces and fewer interruptions for tool changes. This paragraph explains how a specialised insert geometry leads directly to measurable productivity advantages. Reliable edge control for demanding milling tasks An octagonal plate form with a 135° cutting angle delivers an optimised contact zone and smoother entry into the cut, lowering the risk of edge chipping. The insert’s double-sided chipbreaker and the cylindrical hole with a double-sided countersink (40°–60°) enhance chip formation and evacuation, which reduces heat concentration and extends service life. For shops machining pockets and faces, this results in improved surface finish and reduced rework – a clear operational benefit derived from the technical design. Robust grade and system compatibility for process security The AH140 grade is a wear- and chip-resistant PVD-coated carbide developed for milling where a sharp cutting edge and process reliability are required together. Integrated into a modular system comprising a milling body, matching inserts and fixing screws, the solution ensures repeatable positioning and straightforward replacement. The plate’s 5.56 mm thickness and zero corner radius provide mechanical stability in interrupted cuts, making this insert suitable for frequent entry/exit operations common in pocket milling. Clear specification for setup and selection Specification details such as the octagonal form, the presence of a locating hole with countersink, the 5.56 mm thickness, and the intended milling application make it straightforward to match the insert to compatible cutters and workholding. Choosing the correct grade and chipbreaker reduces trial-and-error at setup and supports a more predictable machining process. The modular nature of the system simplifies inventory management and facilitates quick insert changes during shifts. Contact Metav Werkzeuge today for tailored advice on the Tungaloy ONHU0705AN AH140 indexable insert and for support specifying the right DoFeed solution for current production needs; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6861818 SKU: 6861818-Tungaloy Manufacturer SKU: TUN6861818 Designation: ONHU0705AN Model series: DoFeed Facts Plate size: 07 Plate thickness: 5.56 mm Cutting angle: 135° Corner radius: 0 Clearance angle: 0° Hole: with hole Special features Material: carbide Grade/coating: AH140 (PVD-coated) Plate form: octagonal Chipbreaker: double-sided Hole style: cylindrical hole + double-sided countersink (40°–60°) Typical application: milling (high-feed, pocketing, face milling) System composition: insert, matching milling body and screws FAQ What materials is this insert suitable for? The AH140 grade and carbide substrate of the ONHU0705AN AH140 insert favour applications that demand wear resistance and edge stability; it is specified for general milling tasks where a sharp edge and process security are required. How does the DoFeed geometry affect machining performance? DoFeed geometry enables large chip volumes at small axial depths, which increases material removal rates while reducing cutting forces per pass, so cycle times are shortened and tool utilisation improves. What is the significance of the octagonal shape and 135° angle? The octagonal form provides multiple indexing positions and the 135° cutting angle reduces entry shock and distributes cutting loads, lowering the risk of edge chipping during pocketing and face milling. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
ONHU 0705AN AH140 Wendeplatten - Tungaloy
Take advantage of the combination of high material removal rates, a wear-resistant AH140 PVD coating and secure octagonal geometry for reliable high-feed milling cycles; order the ONHU0705AN AH140 insert directly via Metav Werkzeuge or ask our consultants if needed. ONHU 0705AN AH140 milling insert ONHU – DoFeed series by Tungaloy, octagonal, 135° A precision indexable insert from the DoFeed family, the ONHU 0705AN AH140 is designed for high-feed milling, pocketing and face machining with large time-chip volumes at minimal axial engagement. High-feed DoFeed family PVD-coated AH140 grade Octagonal 135° geometry Double-sided chipbreaker Maximise throughput with proven high-feed performance The DoFeed design prioritises efficient material removal in short-cycle milling operations. The octagonal geometry and the 135° cutting angle enable shallow axial depths while maintaining substantial feed per tooth, so cycle times are reduced without sacrificing stability. The AH140 grade, a PVD-coated carbide, sustains a sharp cutting edge under repetitive loads, translating into measurable productivity gains when machining pockets and faces. This performance-focused configuration supports predictable tool life and process repeatability in production environments. Consistent edge integrity and process security for repeatable parts Tool life and component quality rely on reliable edge stability. The AH140 composition is optimised for resistance to wear and chipping, providing a balance between toughness and hardness suitable for intermittent cut conditions. The PVD-coated surface improves hardness and thermal resistance, which reduces flank wear and helps maintain surface finish across runs. With a double-sided chipbreaker pattern, the insert secures controllable chip formation and smoother evacuation, lowering the risk of rework and contributing to consistent part geometry. Flexible geometry and secure clamping for diverse milling tasks The octagonal, indexable design increases the number of usable cutting edges, reducing changeover frequency and inventory requirements. The insert features a cylindrical hole with a double countersink (40°–60°) for robust seating and torque transmission, and a nominal thickness of 5.56 mm matched to size 07 clamping pockets. These mechanical details combine to deliver stable clamp support and repeatable positioning, which is especially beneficial when switching between pocketing and face milling in mixed-production settings. Contact Metav Werkzeuge for technical advice and to order the ONHU 0705AN AH140 indexable insert; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6861811 SKU: 6861811-Tungaloy Manufacturer SKU: TUN6861811 Model series: DoFeed Application: Fräsen Core data Insert designation: ONHU0705AN Grade: AH140 Insert size: 07 Insert thickness: 5.56 mm Corner radius: 0 mm Clearance angle: 0° Cutting angle: 135° Design & features Shape: octagonal Hole: with hole Hole style: cylindrical hole + double countersink (40°–60°) Chipbreaker: double-sided Material: cemented carbide, PVD-coated Typical use: high-feed milling, pocketing, face machining FAQ What materials can be machined with this insert? The ONHU 0705AN AH140 Tungaloy indexable insert (SKU 6861811-Tungaloy) is specified for general milling tasks and performs well on a wide range of steels and typical workshop materials encountered in face and pocket milling. How does the AH140 grade affect tool life? The AH140 PVD-coated carbide is engineered for wear and chipping resistance; the coating and substrate combination extend edge life under repetitive high-feed conditions, helping to reduce insert change frequency. Which operations suit the DoFeed geometry best? High-feed milling, pocketing and planing operations benefit from the DoFeed family geometry thanks to shallow axial cut requirements combined with high feeds per tooth, providing efficient material removal for short-cycle production. How is the insert secured in the cutter body? The insert uses a cylindrical hole with a double countersink (40°–60°) to ensure a secure, repeatable seat and reliable torque transmission when clamped in the compatible milling body. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
ONHU 0705AN AH725 Wendeplatten - Tungaloy
Take advantage of high-feed performance, the PVD-coated AH725 grade and the octagonal geometry for reliable, repeatable milling cycles; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. ONHU 0705AN AH725 indexable insert for milling — Tungaloy DoFeed ONHU 0705AN AH725 is an octagonal indexable insert designed for high-feed milling, pocketing and face machining, supplied for system use with matching milling bodies and screws. High-feed milling capacity PVD-coated AH725 universal grade Octagonal insert for multiple indexing Cylindrical hole with 40°–60° countersink Increase throughput with high-feed geometry The DoFeed family is engineered for large material removal rates at small axial depths, translating directly into shorter cycle times and fewer tool changes. The octagonal geometry increases available indexing positions, which improves cutter utilisation and reduces cost per edge. Together with the 135° cutting angle, this shape supports stable cutting forces and predictable chip flow, making the insert particularly suited to high-feed milling and aggressive pocketing operations while maintaining surface quality. Secure process reliability with AH725 and PVD coating The AH725 grade combines a PVD-coated carbide substrate with a fracture-resistant microstructure, created for mixed-material environments and small-tool applications where process security is critical. The coating enhances wear resistance and adhesion under interrupted cuts; the substrate balances toughness and hardness to reduce edge chipping. This results in consistent tool life when machining steel and rostfreier Stahl, lowering rework rates and improving batch-to-batch reproducibility for production runs. Precise clamping and versatile system compatibility The insert’s cylindrical hole with double countersink (40°–60°) and 5.56 mm thickness ensure secure clamping in compatible DoFeed milling bodies, while the double-sided chipbreaker offers two usable cutting edges for efficient indexing. The combination of octagonal form, 0 mm corner radius and a 135° approach angle gives a balance of positive cutting action and robust edge strength. The insert is supplied as part of a system comprising the milling body, matching inserts and fastening screws, supporting straightforward integration into existing machining setups. The ONHU0705AN AH725 insert supports consistent performance across repeated cycles and simplifies tool inventory management. Contact Metav Werkzeuge for availability and detailed application advice on the Tungaloy DoFeed ONHU0705AN AH725 insert (SKU TUN6861798) to ensure optimal selection for specific milling tasks Technical data Article number: 6861798 SKU: 6861798-Tungaloy Manufacturer SKU: TUN6861798 Name: ONHU0705AN AH725 Tungaloy indexable insert Manufacturer: Tungaloy Core specifications Thickness: 5.56 mm Insert size: 07 Cutting angle: 135° Corner radius: 0 mm Relief angle: 0° Hole style: cylindrical hole + double-sided countersink (40°–60°) Features & applications Model series: DoFeed — high-feed milling family Grade/coating: AH725, PVD-coated carbide Shape: octagonal Chipbreaker: double-sided Application: milling — high-feed, pocketing and face machining System composition: milling body, matching inserts and screws Material suitability: steel and rostfreier Stahl FAQ What types of milling is this insert best suited to? The insert is tailored for high-feed milling, pocketing and face machining; the DoFeed geometry and AH725 grade support large material removal rates with stable cutting behaviour. Is the insert compatible with standard DoFeed milling bodies? Yes, the ONHU0705AN is designed as part of the DoFeed system and fits matching milling bodies when secured with the specified screws. Which materials can be machined with this grade? The AH725 grade is a universal, fracture-resistant option for machining steel and rostfreier Stahl, offering reliable performance where material changes occur. How does the octagonal shape benefit production? The octagonal form provides multiple indexing positions, extending the number of usable edges per insert and lowering tooling cost per part while maintaining cutting stability. Does the insert require a specific clamping arrangement? The cylindrical hole with double countersink (40°–60°) and 5.56 mm thickness are intended for secure clamping in compatible DoFeed holders to ensure reliable fixation under high-feed conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
ONHU 0705AN AH725 Wendeplatten - Tungaloy
Benefit from the combination of PVD-coated AH725 carbide and the DoFeed high-feed geometry for consistently higher metal removal rates and improved process reliability; order the ONHU0705AN AH725 insert directly via Metav Werkzeuge or consult our specialists for application advice. ONHU0705AN AH725 indexable insert — DoFeed high-feed milling, octagonal 07, Tungaloy The ONHU0705AN AH725 indexable insert is a DoFeed-series component developed for high-feed milling, pocketing and face operations where large time-volume removal is required at small axial depths. High-feed DoFeed design for large material removal PVD-coated AH725 carbide for process security Octagonal 07 format with 135° approach angle Cylindrical hole with double countersink 40°–60° Increase throughput with high-feed DoFeed geometry The DoFeed family is designed to raise throughput by enabling large time-volume removal with low axial engagement. The octagonal 07 format combined with a 135° approach angle reduces cutting forces per edge, allowing higher feed rates while keeping tool projection and vibration low. With the PVD-coated AH725 carbide, this insert maintains edge integrity under fluctuating cutting conditions, delivering measurable reductions in cycle time without compromising component quality. The result is a clear productivity advantage in repetitive milling tasks. Secure clamping and consistent chip control for stable machining A cylindrical hole with double-sided countersink (40°–60°) provides confident mechanical locating and secure clamping in compatible milling bodies, while the double-sided chipbreaker geometry supports controlled chip formation across a range of feeds. These design elements combine to reduce chatter, stabilise the cut and help achieve repeatable surface finishes. For workshop managers aiming to reduce rework and tool-change frequency, the combination of form-fit clamping and optimised chip evacuation is a practical step towards more reliable process outcomes. Wide material coverage and straightforward system integration The AH725 PVD coating and the carbide substrate make this insert suitable for machining both steel and stainless steels, beneficial where frequent workpiece material changes occur. The DoFeed system comprises a milling body, matching indexable inserts and fixing screws, which keeps tool inventory compact and toolset-up time low. For applications requiring efficient pocketing or face milling with smaller cutters, the insert’s geometry supports straightforward integration into existing milling heads and reduces the need for specialised tooling. Robust geometry and precise dimensions for predictable results Key dimensions such as the plate thickness of 5.56 mm, the 07 size and a nominal corner radius of 0 deliver a profile that balances edge strength and cutting accessibility. The 135° angle contributes to a reduced radial cutting component and improved insert life in interrupted cuts. These numeric specifications provide a verifiable basis for process planning: they can be used directly in machining simulations and tool lists to ensure compatibility and to define cutting parameters with confidence. Choose Tungaloy DoFeed inserts via Metav Werkzeuge for robust high-feed performance — contact Metav Werkzeuge for tailored recommendations or to secure stock at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6861805 SKU: 6861805-Tungaloy Manufacturer SKU: TUN6861805 Manufacturer article number: 6861805 Brand: Tungaloy Model series: DoFeed Name: ONHU0705AN AH725 indexable insert Facts Size: 07 Plate thickness: 5.56 mm Approach angle: 135° Corner radius: 0 Relief angle: 0° ISO code: 0705AN Special features Octagonal plate form Cylindrical hole with double-sided countersink (40°–60°) Double-sided chipbreaker PVD-coated carbide, grade AH725 System: milling body, matching indexable inserts and screws Intended application: milling, pocketing and face operations Suitable for steel and stainless steels FAQ What cutting tasks is this insert best suited for? The ONHU0705AN AH725 insert is optimised for high-feed milling, including pocketing and face milling where large time-volume removal is required at shallow axial engagement. Which materials can be machined with this grade? The AH725 PVD-coated carbide formulation is intended for use on steel and stainless steels, making the insert a versatile choice for mixed-material batches. How does the octagonal shape affect performance? An octagonal plate offers multiple indexing positions and good edge strength; coupled with the 135° approach angle, it reduces radial cutting forces and supports higher feed rates. Is the insert compatible with standard DoFeed milling bodies? Yes, the insert is part of the DoFeed system architecture and is intended to be used with compatible milling bodies, matching screws and clamping arrangements. What role does the double-sided chipbreaker play? The double-sided chipbreaker promotes consistent chip formation across a range of feed rates, improving chip evacuation and reducing the risk of built-up edge or unstable cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
ONMU 0507AN AH120 Wendeplatten - Tungaloy
Combining the PVD-coated AH120 grade with a cemented carbide substrate yields a wear- and chipping‑resistant milling insert with a reliably sharp cutting edge and strong process security; order the item directly via Metav Werkzeuge or consult our technical advisors for application-specific guidance. ONMU 0507AN AH120 indexable insert for milling — Tungaloy The ONMU 0507AN AH120 is an octagonal, double‑sided indexable insert designed for a range of milling tasks where a sharp, durable cutting edge and process reliability are required PVD-coated AH120 grade for stable edge life Octagonal 05 form for versatile clamping Double-sided chipbreaker for reliable chip control Countersunk hole, 135° seating angle Durable cutting performance that reduces rework and downtime The insert is manufactured from cemented carbide and finished with a PVD coating to extend tool life under demanding milling conditions. The AH120 grade is engineered to be wear- and chipping‑resistant, which supports consistent surface quality and fewer interruptions for insert changes. PVD (physical vapour deposition) creates a thin, adherent layer that improves abrasion resistance and helps preserve a sharp cutting edge, so the machining process remains efficient and predictable even in cyclic production environments. Stable seating and geometry for secure clamping and repeatability An octagonal 05 form combined with a 135° seating angle and a cylindrical central hole with a double‑sided countersink (40°–60°) ensures positive location in compatible milling bodies. The insert’s double‑sided design effectively provides multiple cutting edges, doubling available tool life before renewal, while the 7.94 mm plate thickness contributes to rigidity during heavier cuts. Because the plate seat, geometry and milling body must match technically, correct seat alignment is decisive for repeatable results and minimised tool chatter. Practical application advice and process fit Designed for a wide range of milling operations — including face, shoulder, slot, high‑feed and contour milling depending on the assigned tool family — this insert supports process security where a sharp edge is essential. The double-sided chipbreaker promotes consistent chip formation and evacuation, which benefits cycle times and workpiece finish. If the intended toolholder or cutting parameters are unknown, Metav Werkzeuge can supply the required technical data to select the appropriate milling body and optimise cutting settings for the AH120 grade. Contact Metav Werkzeuge for availability and tailored tooling advice on the Tungaloy ONMU0507AN AH120 insert; email info@metav-werkzeuge.com or call +49 2822 7131930 for expert support. Technical data Article number: 6758744 Manufacturer SKU: TUN6758744 SKU: 6758744-Tungaloy Model series: Fräswendeschneidplatten Material: Hartmetall (cemented carbide) Numerical data Plate thickness: 7.94 mm Seating angle: 135° Plate size: 05 Corner radius: 0 Relief angle: 0° Special features Grade: AH120 Coating: PVD Plate form: octagonal Chipbreaker: double-sided Hole: with cylindrical hole + double-sided countersink (40°–60°) wpl_iso_2: 0507AN FAQ Which milling operations are suitable for this insert? The Tungaloy ONMU0507AN AH120 indexable insert is intended for face, shoulder, slot, high‑feed and contour milling, depending on the assigned milling body and tool family. What are the key material and coating characteristics? The AH120 grade is a PVD-coated cemented carbide developed for wear and chipping resistance; it is specified where a sharp cutting edge and process security are required. How must the insert be mounted to ensure correct performance? The insert requires a technically matching milling body and seat; it uses a cylindrical hole with a double‑sided countersink and a 135° seating angle to secure correct clamping and repeatable positioning. Is this insert indexable and how many edges are available? Yes — the insert is double‑sided, providing multiple usable edges; edges can be indexed to extend in‑service life before replacement. What identifiers should be used when ordering or referencing this insert? Reference the manufacturer article number 6758744, SKU 6758744‑Tungaloy, or manufacturer SKU TUN6758744 when inquiring about the ONMU0507AN AH120 insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com