SNMG 120408 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, stable chip control and a compact square geometry for reliable, productive turning operations; order the insert directly via Metav Werkzeuge or consult the team for application advice. SNMG 120408 T9215 SNMG Turning Insert, CVD-coated Carbide — Tungaloy SNMG120408 T9215 is an ISO-indexable insert optimised for external and internal turning of medium steels, offering a square form with a 90° geometry and a cylindrical hole for secure clamping CVD-coated carbide grade T9215 for steel machining Square SNMG insert with 0.8 mm corner radius Double-sided chipbreaker for continuous to light interruptions Proven productivity for medium-steel turning The CVD-coated carbide composition and T9215 grade make this insert particularly effective for medium-steel applications where a balance of wear resistance and fracture toughness is required. The geometry and coating together enable higher cutting speeds and a longer tool life compared with uncoated grades, which translates into fewer tool changes and improved machine uptime. The combination of coating and substrate is geared towards workshops seeking repeatable, economical results in both continuous and lightly interrupted turning cycles. Secure clamping and consistent cutting performance With its square form and 90° geometry, the insert delivers stable contact with the toolholder and predictable cutting forces, while the cylindrical hole supports reliable fastening. The modest 0.8 mm corner radius reduces edge stress for finishing passes yet still permits modest step-over for semi-finish work. The double-sided chipbreaker assists chip control across a range of depths of cut; the design helps to break chips efficiently during steady cuts and to limit vibration during slight interruptions, improving surface finish and extending insert life. Practical overview of benefits and recommended use Designed as part of an ISO insert system, the component integrates into a standard holder, backing plate and clamping set; compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness. The insert is intended for turning (external and internal); select the matching chipbreaker and T9215 grade to suit the specific material and stability of the set-up. For manufacturers and job shops focused on throughput, the insert offers a clear combination of process security and cost-effectiveness due to reduced downtime and stable wear behaviour. Contact Metav Werkzeuge for technical guidance and procurement of the Tungaloy SNMG120408 T9215 turning insert; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6775274 Manufacturer SKU: TUN6775274 SKU: 6775274-Tungaloy Model series: ISO turning indexable inserts Material: carbide Facts ISO designation: SNMG120408 Grade: T9215 Corner radius: 0.8 mm Plate size: 12 mm Plate thickness: 4.76 mm Clearance angle: 0° Geometry angle: 90° Hole: with cylindrical hole Chipbreaker: double-sided Special features Square plate form CVD-coated carbide substrate Designed for external and internal turning Suitable for continuous to light interrupted cuts Compatibility depends on holder form, clearance, tolerance and fastening FAQ What materials is this insert suitable for? The Tungaloy SNMG120408 T9215 turning insert is intended primarily for medium steels; the T9215 grade combines wear resistance and toughness for productive machining. Which holder types are compatible with this SNMG insert? Compatibility is determined by the holder’s form, clearance angle, tolerance class, fastening method, size and thickness; the SNMG120408 fits standard SNMG-compatible external and internal turning holders. How does the 0.8 mm corner radius affect performance? A 0.8 mm corner radius offers a compromise between strength and finish: it reduces edge chipping risk while allowing modest step-over for semi-finishing, improving process reliability. Is the chipbreaker suitable for interrupted cuts? The double-sided chipbreaker is optimised for continuous cutting and light interruptions; heavy interruptions may require a different chipbreaker geometry or a more robust grade. What is the significance of the CVD coating on this insert? The CVD coating enhances wear resistance and thermal stability, helping the Tungaloy SNMG120408 T9215 insert maintain edge integrity at elevated cutting speeds and extending tool life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 T9225 Wendeplatten - Tungaloy
Benefit from the combination of the robust T9225 grade, CVD-coated carbide and ISO compatibility for stable chip control and reliable tool life; order the SNMG 120408 T9225 insert directly via Metav Werkzeuge or consult our specialists for application matching. SNMG 120408 T9225 Tungaloy turning insert – ISO square insert for medium to heavy steel turning SNMG120408 T9225 Tungaloy turning insert designed as an ISO-standard square, double-sided insert for external and internal turning in steel, offering high toughness for interrupted cuts and variable engagement. ISO-standard square insert SNMG 120408 CVD-coated carbide grade T9225 Double-sided chipbreaker for interrupted cuts 0.8 mm corner radius for robust edge Higher productivity with a robust universal grade The SNMG120408 delivers consistent performance in medium to heavy steel turning thanks to the T9225 universal grade. The CVD-coated carbide substrate combines wear resistance with toughness, which reduces flank wear and extends tool life under mixed cutting conditions. For operations where engagement is variable or where light interruptions occur, the robust grade and stable chip formation translate into fewer indexings and less unplanned downtime. This results in more productive turning cycles and a predictable cost per component when machining structural and alloyed steels. Easy integration into ISO tool systems for quick changeovers As an ISO-standard insert in a square 12 mm size with a cylindrical hole and a 4.76 mm plate thickness, it follows common dimensional conventions to ensure compatibility with matching holders. The 0° relief and the 90° cutting geometry make it suitable for standard external shoulders and general turning set-ups. Compatibility depends on form, relief angle, tolerance class, fastening and thickness; selecting holders and clamps that match these parameters ensures secure seating, repeatable clamping and reproducible cutting conditions—leading to faster tool changes and reduced set-up time on the shop floor. Practical shop-floor benefits for reliable results Designed with a double-sided chipbreaker and a 0.8 mm corner radius, this insert balances strength at the cutting edge with acceptable surface finish for many turned parts. The double-sided design doubles the usable edges, improving economy per insert, while the chipbreaker geometry helps control swarf in through- and interrupted cuts. For workshop planning, this equates to fewer insert replacements and steadier cycle times when turning shafts, journals or stepped components. Select the matching chipbreaker and grade to suit workpiece stability and cutting parameters for the best combination of performance and life. For tailored application advice on Tungaloy T9225 turning inserts and to confirm availability, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6780924 SKU (dealer): 6780924-Tungaloy Manufacturer article no.: 6780924 Manufacturer SKU: TUN6780924 Facts Insert designation: SNMG120408 Grade: T9225 Material: carbide Corner radius: 0.8 mm Plate size: 12 mm Plate thickness: 4.76 mm Relief angle: 0° Cutting angle: 90° Special features CVD-coated carbide Double-sided chipbreaker Square plate form with cylindrical hole ISO-standard turning insert Suited for external and internal turning FAQ What materials is this insert designed for? The SNMG120408 in grade T9225 is formulated for medium to heavy steel turning and performs well where toughness is required for variable engagement or light interruptions. Can the insert be used for interrupted cuts? Yes, the T9225 grade and the robust geometry of the SNMG120408 make it suitable for interrupted machining and applications with changing engagement. How is chip control achieved with this insert? Chip control is supported by the double-sided chipbreaker, which helps form and evacuate chips consistently during both stable and less-stable cutting conditions. Is the insert compatible with all SNMG holders? Compatibility depends on matching holder form, relief angle, tolerance class, fastening method, size and thickness; the SNMG120408 follows ISO dimensions to simplify matching with standard holders. How many usable cutting edges does the insert provide? The square, double-sided design provides multiple usable edges per insert, improving economy and reducing replacement frequency. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide grade for enhanced toughness, the ISO SNMG 120408 format for wide holder compatibility, and a double-sided chipbreaker that supports medium to heavy steel turning. Order the insert directly via Metav Werkzeuge or request advice from our consultants for optimal grade and holder selection. SNMG 120408 T9225 indexable turning insert for turning — Tungaloy SNMG 120408 T9225 is an ISO‑standard indexable insert designed for external and internal turning applications in steel machining, offering a robust universal grade for interrupted cuts. CVD-coated carbide T9225 grade Robust for medium to heavy steel machining ISO SNMG 120408 form for broad compatibility Double-sided chipbreaker for efficient chip control Engineered for reliable steel turning and consistent results The insert is manufactured from CVD-coated carbide and specified as grade T9225, a robust universal composition developed for medium to heavy steel machining. This combination prioritises toughness where cutting conditions vary or where slight interruptions in the cut occur, reducing the risk of chipping and premature tool failure. The double-sided chipbreaker reduces chip length and improves evacuation, which supports longer uninterrupted runs and fewer machine stops for cleaning. By focusing on material behaviour and coating performance, this solution helps to stabilise the process and maintain part tolerances. Simple compatibility and predictable set-up Designed to the ISO SNMG 120408 standard, the insert fits widely used external holders and boring bars when matched by form, relief angle, tolerance class, fastening and thickness. The square insert shape with a 90° lead angle provides secure seating and predictable engagement in typical turning set-ups. The central cylindrical hole enables reliable clamping, while the 0.8 mm corner radius assists in achieving a balance between edge strength and surface finish. These measurable characteristics make tool selection and changeover straightforward for production environments and support consistent cycle times. Productivity gains through material and geometry choices The wear‑resistant carbide substrate combined with a CVD coating delivers good flank and crater wear performance under steel turning conditions, yielding longer tool life and fewer indexings. The 4.76 mm plate thickness and the geometry choices offer rigidity that helps to dampen vibration, especially when machining heavier sections. Optimised chip control and the universal sortation of the grade mean that one insert type can cover a range of turning tasks, reducing inventory complexity and simplifying tool management in the workshop. Practical considerations for workshop use and process planning Because the insert is double-sided, one item offers two usable cutting edges, improving economy per edge while maintaining consistent cutting geometry. The inclusion of a cylindrical hole and the ISO form simplifies mounting and repeatability when paired with the correct clamping set and screws. For interrupted cuts or applications with variable engagement, selecting the T9225 grade helps to maintain productivity where more brittle grades might fail. If there is any uncertainty about holder compatibility or parameter optimisation, technical advice is available to align the insert with machine and workpiece conditions. For secure, productive turning with Tungaloy’s T9225 grade, contact Metav Werkzeuge for availability and tailored technical guidance: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: 6796045 Manufacturer SKU: TUN6796045 SKU: 6796045-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Carbide Grade/coating: T9225 / CVD-coated Core specifications Insert designation: SNMG120408 Shape: Square (SNMG) Size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Lead angle: 90° Relief angle: 0° Hole: with hole — cylindrical Special features Double-sided chipbreaker Compatible with ISO SNMG holders Robust universal grade for medium to heavy steel machining Central cylindrical hole for secure clamping Designed for external and internal turning FAQ What materials is this insert suited for? The SNMG 120408 T9225 indexable insert is specified for medium to heavy steel machining and performs well under variable engagement and slightly interrupted cuts. How does the T9225 grade affect tool life? The T9225 grade, with its CVD coating and carbide substrate, improves toughness and wear resistance, which extends tool life compared with uncoated or less tough grades. Is the insert reversible and how many cutting edges are available? Yes, the insert is double-sided, offering two usable cutting edges per insert to improve economy and reduce tooling changes. Which holders are compatible with this SNMG insert? Compatibility is achieved with holders matching the ISO SNMG 120408 form; correct fit depends on form, relief angle, tolerance class, fastening method, size and thickness. What corner radius and thickness should be expected during set-up? Set-up should account for a 0.8 mm corner radius and a plate thickness of 4.76 mm to ensure correct clamping and cutting geometry. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 T9225 Wendeplatten - Tungaloy
Combines a CVD-coated carbide grade T9225 and a 0.8 mm corner radius for reliable medium-to-heavy steel turning; the ISO SNMG form and central hole ensure broad holder compatibility and straightforward indexing. Order genuine inserts via Metav Werkzeuge or consult our technical team for application matching. SNMG 120408 T9225 indexable insert for Turning — Tungaloy, CVD-coated carbide, 0.8 mm radius The SNMG120408 T9225 is an ISO-form indexable insert for turning, engineered as a robust universal grade for medium-to-heavy steel machining with good resistance to interrupted cuts. CVD-coated carbide grade T9225 0.8 mm corner radius for versatility Double-sided chipbreaker for stability ISO SNMG form with cylindrical central hole Reliable performance for medium-to-heavy steel turning The CVD-coated carbide grade T9225 delivers a balance of wear resistance and toughness suited to medium-to-heavy steel machining. As a universal grade, it handles variable engagement and light interruptions without rapid edge failure; this results in consistent tool life and reduced downtime. The CVD layer protects the substrate at elevated temperatures typical of demanding turning operations, while the carbide core provides the necessary edge strength for stable metal removal. This combination supports higher material removal rates and predictable results under changing cutting conditions. Designed for secure clamping and accurate indexing Compatibility with holders is governed by the ISO form, clearance geometry, tolerance class, clamping method, size and thickness. The square plate form with a cylindrical central hole and a plate thickness of 4.76 mm allows secure clamping in standard SNMG holders. The insert’s 0° relief angle and 90° lead angle require matching holder geometry; correct selection prevents unwanted contact and ensures the insert seats precisely. Because the SNMG form is ISO-standardised, many commercially available external and boring holders accept this format, simplifying tool procurement and reducing setup complexity. Improved chip control and operational economy The double-sided chipbreaker improves chip formation and evacuation, stabilising the cut and helping to protect the cutting edge during interrupted or variable cuts. The 0.8 mm corner radius offers a compromise between edge strength and profile accuracy—sufficient robustness for heavier passes while maintaining acceptable surface finish. Using a universal grade like T9225 often reduces the number of grade changes across mixed-production batches, supporting efficient inventory management and lower total tooling costs over time. Contact Metav Werkzeuge for availability, application advice and to source genuine Tungaloy SNMG120408 inserts; eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical data Article number: 6780948 SKU: 6780948-Tungaloy Manufacturer SKU: TUN6780948 Item designation: SNMG120408 T9225 Tungaloy insert Core data Corner radius: 0.8 mm Plate size: 12 mm Plate thickness: 4.76 mm Lead angle: 90° Relief angle: 0° Special features Grade: T9225 (CVD-coated carbide) Double-sided chipbreaker Square plate form With cylindrical central hole Suitable application: turning Compatible with ISO SNMG holders Robust universal grade for steel machining FAQ What materials is this insert suited for? The Tungaloy SNMG120408 T9225 insert is optimised for medium-to-heavy steel machining; the CVD-coated carbide grade provides wear resistance and toughness appropriate for variable engagement and light interruptions. How is holder compatibility determined? Compatibility depends on the insert form, clearance geometry, tolerance class, clamping method, size and thickness; the SNMG ISO form and the cylindrical central hole facilitate mounting in standard SNMG holders. Which dimensions are most important when checking fit? Check the plate size (12 mm), plate thickness (4.76 mm), corner radius (0.8 mm), lead angle (90°) and the central hole style to ensure correct seating and clamping for the chosen holder. Does the insert offer chip control for interrupted cuts? Yes, the double-sided chipbreaker stabilises chip formation and helps protect the cutting edge during interrupted or variable cuts, improving process reliability. What benefit does the T9225 grade provide? The T9225 CVD-coated grade combines surface protection with a tough carbide substrate, offering a durable, versatile solution for production environments that require both wear resistance and edge stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 T9225 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide T9225, ISO conformity and dependable chip control for stable productivity; order the SNMG120408 T9225 turning insert directly via Metav Werkzeuge or ask our consultants if needed. SNMG120408 T9225 Tungaloy turning insert — CVD-coated carbide, 0.8 mm corner radius, square form SNMG120408 T9225 is an ISO-designated turning insert engineered for external and internal turning operations in steel, combining a robust, universal grade with well‑defined geometry for predictable machining performance. ISO SNMG120408 format, 12 mm edge length CVD-coated carbide grade T9225 Suitable for medium to heavy steel machining Double-sided chipbreaker, with cylindrical hole 0.8 mm corner radius for robust edge Consistent tool life from a robust universal grade The T9225 grade is a CVD-coated carbide developed as a universal solution for medium to heavy steel turning where variable engagement or lightly interrupted cuts demand additional toughness. The coating improves wear resistance while the base carbide delivers mechanical strength, which together translate into longer tool life and fewer index changes. For production environments this means more consistent cycle times and reduced tool handling, supporting a smoother machining flow and less unplanned downtime. Predictable seating and secure clamping for repeatable parts Compatibility with the toolholder is determined by form, clearance angle, tolerance class, fastening method, size and thickness; correct matching ensures the insert seats squarely and clamps without micro‑movement. The ISO designation and the square form simplify holder selection, while the 4.76 mm thickness and cylindrical hole support rigid clamping. In practice this reduces vibration and enhances repeatability, which benefits dimensional stability and surface integrity on every workpiece. Improved chip control and reliable edge integrity The double-sided chipbreaker and a 0.8 mm corner radius provide balanced chip formation and evacuation under higher material removal rates. A defined chipbreaker geometry helps split and fold chips away from the cutting zone, lowering the risk of built-up edge and enabling stable cutting forces. The 0° relief and 90° included angle support predictable cutting direction and make programming and fixture planning straightforward, yielding more consistent finishes with fewer rework cycles. System approach and practical handling An indexable insert functions as part of a system: ISO insert, matching external holder or boring bar, shim/clamping set and replacement screws. This system build ensures that mechanical interfaces are standardised and serviceable. Selecting the correct chipbreaker and grade depending on workpiece material and cut type is essential; the T9225 grade is particularly well suited where a balance of wear resistance and toughness is required. Clear labelling and ISO conformity also aid inventory management and quick replacement in production settings. Contact Metav Werkzeuge for a technical consultation and availability of the Tungaloy SNMG120408 T9225; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6780770 Manufacturer SKU: TUN6780770 Model series: ISO turning inserts Designation: SNMG120408 Grade/designation: T9225 Cutting material: CVD-coated carbide Shape: square Hole style: cylindrical hole Plate thickness: 4.76 mm Plate size: 12 mm Corner radius: 0.8 mm Clearance angle: 0° Included angle: 90° Application: Turning Facts Thickness: 4.76 mm Size (edge length): 12 mm Corner radius: 0.8 mm Clearance angle: 0° Included angle: 90° Manufacturer article number: 6780770 Special features CVD-coated carbide T9225 Robust universal grade for medium to heavy steel machining Double-sided chipbreaker for controlled chips Square form, ISO SNMG120408 With cylindrical hole for secure clamping Compatibility determined by form, clearance angle, tolerance class, fastening, size and thickness System components: insert, holder, shim/clamping set and screws FAQ What materials is this insert best suited for? The SNMG120408 T9225 insert is specified for medium to heavy steel machining; the T9225 CVD-coated carbide offers the wear resistance and toughness required for these applications. How does the chipbreaker affect performance? The double-sided chipbreaker on this insert promotes predictable chip formation and evacuation, reducing built-up edge and improving surface finish when using the SNMG120408 T9225 in stable cutting conditions. Which holders are compatible with this ISO insert? Holder compatibility depends on form, clearance angle (0°), tolerance class, fastening, size (12 mm) and thickness (4.76 mm); selecting an ISO SNMG holder with matching specifications ensures secure seating and repeatable results. Can this insert handle interrupted cuts? Yes; the T9225 grade is designed for robustness and improved toughness, making it suitable for lightly interrupted cuts and situations with varying engagement. What specific geometry helps with edge life? The 0.8 mm corner radius and CVD coating combine to strengthen the cutting edge and reduce wear, which contributes to longer service intervals for the SNMG120408 T9225. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 T9225 Wendeplatten - Tungaloy
Benefit from the combination of a CVD-coated carbide grade that delivers toughness under interrupted cuts and a versatile SNMG square geometry that simplifies inventory; order directly via Metav Werkzeuge or consult our specialists for application guidance. SNMG120408 T9225 turning indexable insert for turning by Tungaloy — CVD-coated carbide, square geometry SNMG120408 T9225 is a square ISO turning indexable insert designed for robust mid-to-heavy steel turning, offering a 0° clearance and a cylindrical centre hole for secure clamping. CVD-coated carbide grade T9225 Universal grade for mid-to-heavy steel Square insert 12 mm, thickness 4.76 mm Double-sided chipbreaker, reversible Cylindrical centre hole for secure clamping Reliable performance where interrupted cuts occur The CVD-coated carbide composition of the T9225 grade is engineered to balance toughness and wear resistance, making it suited to variable cutting conditions encountered in mid-to-heavy steel turning. This indexable insert provides consistent edge life under changing engagement and intermittent cuts, which reduces the frequency of tool changes and supports uninterrupted production cycles. The coating enhances surface hardness while the substrate maintains fracture resistance, so process stability is improved without sacrificing productivity. Positive clamping and repeatable accuracy for production A square geometry combined with a cylindrical centre hole and a standard ISO form ensures reliable seating in compatible toolholders. The 12 mm size and 4.76 mm thickness, together with a 0° clearance and a corner radius of 0.8 mm, allow predictable contact conditions and repeatable tool setup. Compatibility with holders is determined by form, clearance angle, tolerance class, fastening method, size and thickness; when the toolholder and insert match these parameters, clamping force is transmitted evenly and dimensional consistency is maintained throughout serial runs. Lower inventory complexity, higher productivity The double-sided chipbreaker design makes the insert reversible, effectively doubling its usable life and reducing spare-part inventory. As part of a standard ISO system, the insert is used with a matching outer holder or boring bar, plus a shim/clamp set and spare screws for secure assembly. The universal nature of the grade reduces the need for multiple special-purpose inserts, simplifying tool management and cutting costs while maintaining reliable machining performance and surface quality. For machining tasks requiring dependable mid-to-heavy steel turning performance with Tungaloy's T9225 grade, contact Metav Werkzeuge for tailored application advice or to request the SNMG120408 insert; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6780832 Manufacturer: Tungaloy Manufacturer SKU: TUN6780832 Metav SKU: 6780832-Tungaloy Core data Insert size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Included angle: 90° Special features ISO designation: SNMG120408 Grade/coating: T9225, CVD-coated carbide Geometry: square, double-sided chipbreaker Hole: cylindrical centre hole Application: turning Model series: ISO turning indexable inserts Typical system: matching holder, shim/clamp set, spare screws FAQ What materials is this insert best suited for? The SNMG120408 T9225 insert from Tungaloy is intended primarily for mid-to-heavy steel turning where toughness and wear resistance are both required. Is the insert reversible to extend service life? Yes, the insert features a double-sided chipbreaker and is reversible, allowing both sides to be used and extending the effective tool life. Which toolholders are compatible with this SNMG insert? Compatibility is achieved with ISO toolholders or boring bars designed for SNMG geometry; matching of form, clearance angle, tolerance class, fastening, size and thickness is required for correct seating. What are the key dimensions and feature details? Key data: 12 mm insert size, 4.76 mm thickness, 0.8 mm corner radius, 0° clearance angle, square shape and a cylindrical centre hole; SKU: 6780832-Tungaloy. How does the CVD coating influence machining performance? The CVD-coated surface increases wear resistance and preserves edge integrity at elevated temperatures, while the carbide substrate provides the necessary toughness for interrupted cuts and variable engagement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide grade designed for medium to heavy steel cutting, ISO compatibility for straightforward toolholder matching, and a robust 0.8 mm corner radius that supports stable chip control in interrupted cuts — order the insert directly via Metav Werkzeuge or consult the specialists for application advice. SNMG 120408 T9225 turning insert by Tungaloy — ISO indexable turn insert for medium to heavy steel SNMG120408 T9225 is an ISO-standard indexable insert intended for external and internal turning, offering a universal, CVD-coated carbide grade for applications with variable engagement and light interruptions CVD-coated carbide for robustness Universal grade for medium–heavy steel ISO SNMG 120408 square form Consistent cutting performance for demanding steel turning The T9225 grade is a CVD-coated carbide engineered as a universal solution for medium to heavy steel machining where intermittent cuts or variable engagement demand higher toughness. Its formulation balances wear resistance and edge strength, leading to longer tool life under changing conditions. The indexed design permits cost-efficient edge changes without regrinding, so production runs remain predictable and machine uptime is maximised while tool management becomes simpler. Clear compatibility and easy mounting in ISO toolholders As an ISO-standard insert, the plate’s geometry and dimensions determine holder compatibility: square form with a nominal size of 12 mm, plate thickness 4.76 mm, and a cylindrical hole for secure clamping. These measurable parameters ensure the insert fits matching SNMG-capable external holders or boring bars without uncertainty. Compatibility is driven by form, relief angle, tolerance class, clamping method, size and thickness — all standardised aspects that simplify tool selection and reduce set-up time on the shop floor. Geometry and chip control that support stable machining The insert’s 0.8 mm corner radius combined with a double-sided chipbreaker gives a reliable cutting edge for both finishing and medium-depth passes; the 0° relief and square plate layout create a robust 90° approach suitable for shoulder work and general turning. This geometry improves edge strength and distributes cutting forces favourably, reducing vibration and enabling steadier surface finish when machine and workpiece stability are appropriate. For interrupted cuts the toughness of the grade helps prevent premature chipping. Select the right chipbreaker and grade for productivity Choosing the correct chipbreaker and the T9225 grade allows a concise balance between material removal rate and process reliability. Where machine rigidity and clamping permit, the combination of the universal grade and the double-sided chipformer supports higher metal removal with controlled chips; in less stable set-ups, the grade’s increased toughness tolerates occasional overloads. The standardised insert form and indexability reduce tool inventory complexity, making production planning and cost calculations more straightforward while maintaining consistent component quality. For machining tasks that demand a tough, CVD-coated carbide insert, contact Metav Werkzeuge for availability and technical advice on the Tungaloy SNMG120408 T9225 insert and compatible holders Technical data Article number: 6780838 SKU: 6780838-Tungaloy Manufacturer SKU: TUN6780838 Manufacturer article number: 6780838 Model series: ISO-Drehwendeschneidplatten Standard designation: SNMG120408 Facts Size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Relief (free) angle: 0° Approach/wedge angle: 90° Design / Special features Material: carbide Coating / grade: T9225 (CVD-coated carbide) Plate form: square Hole: with hole, cylindrical hole Chipbreaker: double-sided Application: turning (external and internal) ISO-compatible indexable insert, double-sided edges FAQ What materials is this insert designed to machine? The SNMG120408 T9225 insert from Tungaloy is formulated primarily for medium to heavy steel machining; the T9225 grade is selected for its toughness in such applications. How is the insert secured in a toolholder? The square SNMG120408 insert uses a cylindrical hole and matches ISO SNMG holders; clamping depends on holder type, tolerance class and the specified 4.76 mm plate thickness. Is the insert indexable and double-sided? Yes — the SNMG120408 Tungaloy insert is indexable and double-sided, providing multiple cutting edges to extend service life and reduce tooling costs. What benefits does the T9225 grade deliver for interrupted cuts? The T9225 CVD-coated carbide grade offers increased toughness and robust edge stability, improving resistance to chipping during light interruptions or variable cutting conditions. Which geometric values are relevant for selecting a matching holder? Key values for matching are the SNMG form, plate size 12 mm, thickness 4.76 mm, corner radius 0.8 mm, and 0° relief; these determine the correct ISO holder and clamping method for the insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 T9225 Wendeplatten - Tungaloy
Take advantage of the robust CVD-coated carbide grade T9225, the double-sided chipbreaker and the square 90° geometry for stable medium-to-heavy steel turning; order directly via Metav Werkzeuge or consult the specialists for application advice. SNMG 120408 T9225 indexable insert for turning — Tungaloy SNMG120408 T9225 is an ISO-format indexable insert for turning, designed for medium to heavy steel machining and compatible with standard ISO turning holders Robust CVD-coated carbide grade T9225 Square 90° geometry for versatile turning Double-sided chipbreaker for predictable chips 0.8 mm nose radius for general finishing Process reliability in medium to heavy steel turning The CVD-coated carbide grade T9225 delivers a combination of toughness and wear resistance that favours stable production in mixed or interrupted cuts. The coating increases thermal resistance at the cutting edge, while the substrate supports impact resilience; this balance reduces flank wear and extends tool life under variable engagement conditions. For production engineers, the result is fewer tool changes and a more consistent cycle time when machining structural and quenched steels. Reduced set-up complexity and economical tooling The insert conforms to the ISO format and its square 90° shape provides flexibility for external turning operations; compatibility with holders depends on form, clearance angle, tolerance class, mounting, size and thickness. The double-sided design halves the effective tooling cost per edge and the cylindrical hole ensures secure clamping. With a plate thickness of 4.76 mm and standard dimensions, this insert integrates into common tool systems, simplifying inventory and cutting-edge logistics for job shops and production lines. Predictable surface finish with controlled edge geometry A 0.8 mm nose radius supports stable finishing while tolerating modest variability in feed; this radius is a pragmatic compromise between edge strength and surface quality. The double-sided chipbreaker promotes chip control for typical steel grades, lowering the risk of entanglement and improving surface consistency. Selecting the appropriate chipbreaker and the T9225 grade for the workpiece and machining mode will yield measurable improvements in surface finish and repeatable component tolerances. Practical guidance for industrial users The insert is intended for turning tasks where robustness is required; choose the chipbreaker and grade aligned to material, operation and machine stability. For interrupted cuts or varying engagement, the T9225 grade is suitable because it emphasises toughness over extreme hardness, thereby reducing edge chipping. Documentation and ISO identification are provided to aid tool-room planning and procurement, supporting efficient machine uptime and predictable production output. For tailored application support or to specify SNMG 120408 T9225 for a particular turning task, contact Metav Werkzeuge for precise recommendations and availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6944757 SKU: 6944757-Tungaloy Manufacturer SKU: TUN6944757 Model series: ISO turning indexable inserts Facts Insert size: 12 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Plate angle: 90° Special features Grade: T9225 (CVD-coated carbide) Material: carbide Double-sided chipbreaker Square plate form Cylindrical hole Intended application: turning Compatibility: ISO-format holders (shape, relief, tolerance and size dependent) FAQ What materials is this insert suited for? The SNMG 120408 T9225 insert is formulated for medium to heavy steel machining; the CVD-coated carbide grade T9225 provides toughness for variable engagement and interrupted cuts. Is the insert reversible? Yes, the insert is double-sided, offering two usable cutting edges to improve economy and reduce changeover frequency. How does the 0.8 mm nose radius affect results? A 0.8 mm radius balances edge strength and surface finish, making it suitable for general finishing and operations where some robustness is required. Which chipbreaker should be chosen for long, continuous cuts? Select the chipbreaker designed for stable chip evacuation under the intended cutting parameters; the double-sided chipbreaker on this insert supports predictable chip formation in steel machining. How is holder compatibility ensured? Compatibility depends on the ISO geometry, clearance angle, tolerance class, mounting and plate thickness; verify the holder form and clamping system against the ISO designation before use. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 T9225 Wendeplatten - Tungaloy
The combination of a CVD-coated carbide substrate and the T9225 grade delivers robust performance for medium to heavy steel turning, while the square, double-sided design extends tool life and reduces tooling costs; order the SNMG120408 insert directly via Metav Werkzeuge or ask the consultants for tailored advice. SNMG 120408 T9225 indexable turning insert by Tungaloy — CVD-coated carbide, 0° relief angle SNMG 120408 T9225 is an ISO-format indexable insert designed for general turning applications where toughness and reliable chip control are required CVD-coated carbide for heavy turning 0° relief angle for stable engagement Double-sided, economical indexing Square 12 mm size for secure clamping Productivity and stable cutting in medium to heavy steel turning The T9225 grade combines a CVD-coated carbide substrate with a formulation optimised for toughness, making the insert particularly effective in medium to heavy steel work where cutting conditions can be variable. The square geometry and double-sided chipbreaker arrangement enable two usable edges per index, reducing tooling consumption and increasing uptime. Compatibility with ISO-standard holders ensures predictable fit and repeatability in production environments, supporting a steady machining rhythm and fewer tool changes. Why the coating and geometry matter for process reliability The CVD coating adds surface hardness and improved wear resistance while preserving core toughness; this balance is critical when facing interrupted cuts or mixed feed conditions. The 0° relief angle maintains a robust cutting edge and helps resist deformation under heavy radial loads, while the 0.8 mm nose radius contributes to edge strength and a consistent surface finish. These technical choices translate into measurable advantages: longer edge life, consistent dimensional results and reduced scrap rates. System integration, clamping security and economic benefits The insert's square 12 mm form and cylindrical hole ensure secure clamping with compatible top-mount holders, shims and clamps. The system approach — insert, mating outside holder or boring bar, shim/clamp set and replacement screws — supports straightforward inventory and fast on-machine exchange. For shops processing a range of steels, the robust universal grade reduces the need for frequent grade swaps and simplifies tool management, delivering both process security and cost efficiency. Contact Metav Werkzeuge for technical consultation on the Tungaloy SNMG 120408 T9225 insert and to arrange supply — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: 6781234 Manufacturer SKU: TUN6781234 Label: SNMG120408 T9225 Tungaloy insert Model series: ISO turning indexable inserts Material: carbide Grade/coating: T9225 / CVD-coated carbide Core specifications Corner radius: 0.8 mm Platen thickness: 4.76 mm Plate size: 12 mm Relief angle: 0° Included hole: with cylindrical hole Geometry angle: 90° Manufacturer article number: 6781234 Special features Double-sided chipbreaker Square plate form Designed for turning applications Compatible with ISO holders and clamping systems Robust universal grade for interrupted cuts and variable engagement FAQ What materials is this insert best suited for? The SNMG120408 T9225 insert is optimised for medium to heavy steel turning; the T9225 grade offers toughness and wear resistance suited to variable cutting conditions. Can the insert handle interrupted cuts? Yes. The T9225 grade and the insert geometry provide enhanced toughness for lightly interrupted to moderately interrupted cuts in steel. How is the insert secured in the holder? The square form and cylindrical hole allow positive clamping with compatible ISO top-mount holders, shims and clamp sets specified for SNMG inserts. How many cutting edges are available per insert? The double-sided design provides two indexable cutting edges, helping to reduce tooling costs and changeover frequency with the SNMG120408 Tungaloy insert (SKU 6781234-Tungaloy). What does the 0° relief angle mean for machining? A 0° relief angle gives a stronger cutting edge and stable engagement under high radial load, which supports consistent tool life and dimensional control during demanding turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 T9225 Wendeplatten - Tungaloy
Benefit from a combination of CVD-coated carbide toughness and a 0.8 mm corner radius that together deliver consistent tool life and reliable surface finish in medium-to-heavy turning operations. Choose this insert for robust performance under varying engagement conditions and consult Metav Werkzeuge for application-specific advice or procurement. SNMG 120408 T9225 SNMG turning insert by Tungaloy — CVD-coated carbide, 0.8 mm radius The SNMG120408 T9225 is a square ISO indexable insert intended for turning; optimised for medium-to-heavy stainless and alloy steel machining where toughness and reproducible results are required. Square ISO insert for robust turning CVD-coated carbide grade T9225 Double-sided chipbreaker for stability 0.8 mm corner radius for improved finish Durable coating and cutting-material chemistry for stable results The combination of a CVD coating and a carbide substrate in this insert is designed to increase wear resistance while preserving edge toughness. The T9225 designation indicates a universal, robust grade suitable for medium-to-heavy machining of steels where intermittent cuts or variable engagement demand extra resilience. In practice, the coating reduces adhesion and flank wear, which extends the useful life of the cutting edge and lowers tool-change frequency, translating into measurable productivity gains on batch and single-piece production runs. ISO conformity and straightforward holder compatibility minimise setup time Produced to ISO dimensions, the insert’s square form and measured geometry simplify selection of a matching holder or boring bar; compatibility is determined by form, clearance angle, tolerance class, fastening, size and thickness as supplied. The insert features a cylindrical hole and a nominal thickness of 4.76 mm, with a specified 0° clearance geometry and a 90° included angle, allowing reliable clamping and predictable seating in standard toolholders. This standardisation reduces setup errors and helps maintain process stability across tool changes. Chip control, edge strength and system-level productivity A double-sided chipbreaker provides consistent chip formation under varying cutting conditions, enabling continuous turning without frequent manual intervention. The 0.8 mm corner radius contributes to edge strength and improved surface quality on finished components, especially where moderate feed rates are used. The product is intended for use within a system comprising an ISO insert, a matched external holder or boring bar, a shim/clamping kit and replacement screws, which together support safe, repeatable machining and faster changeovers. Speak to Metav Werkzeuge about Tungaloy SNMG120408 T9225 indexable inserts for tailored recommendations and stock information; technical enquiries by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6796087 SKU (merchant): 6796087-Tungaloy SKU (manufacturer): TUN6796087 Model series: ISO-Drehwendeschneidplatten Facts Corner radius: 0.8 mm Plate size: 12 mm Plate thickness: 4.76 mm Clearance angle: 0° Included angle: 90° Special features Material: Carbide Coating: CVD-coated carbide grade T9225 Shape: Square Hole: With cylindrical hole Chipbreaker: Double-sided Application: Turning (external and internal) Compatibility: ISO-indexed geometry, suited to matching holders and boring bars FAQ What materials is this insert suitable for? The SNMG120408 T9225 insert is specified for medium-to-heavy machining of steels and is particularly effective where varying engagement or light interruptions require a tougher grade. How does the T9225 grade influence cutting performance? Tungaloy’s T9225 grade pairs a tough carbide substrate with a protective CVD coating to offer balanced wear resistance and edge strength for stable, repeatable performance in tougher turning applications. Can the insert be re-indexed or is it single-use? The insert features a double-sided chipbreaker and square geometry that permit indexing to fresh cutting edges; the reversing of sides extends the service life within the intended application limits. Which holder features must be checked for compatibility? Compatibility is governed by the insert form, clearance angle, tolerance class, fastening type, size and thickness; ensure the holder matches the ISO dimensions and the insert’s 4.76 mm thickness and cylindrical hole configuration. What finish can be expected with a 0.8 mm corner radius? A 0.8 mm corner radius offers a compromise between edge strength and surface finish, producing improved part quality at moderate feeds while also enhancing edge robustness for interrupted cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 T9225 Wendeplatten - Tungaloy
Take advantage of a robust, CVD-coated carbide grade that combines reliable edge stability and predictable tool life for medium to heavy turning operations; order directly via Metav Werkzeuge or consult our specialists for application guidance and holder compatibility. SNMG 120408 T9225 indexable turning insert — Tungaloy, CVD-coated carbide for medium–heavy steel turning SNMG 120408 is an ISO-format, square indexable insert designed for external and internal turning where a tough, versatile grade is required. CVD-coated carbide grade T9225 Robust universal grade for medium–heavy steel Double-sided chipbreaker for longer use Square SNMG insert with 0.8 mm corner radius Consistent productivity for mixed turning tasks The SNMG120408 insert is engineered to deliver stable cutting performance in changing engagement conditions. Its CVD-coated carbide substrate and the T9225 grade offer an optimum balance between hardness and toughness, which reduces flank wear while resisting chipping during interrupted cuts. This results in fewer insert changes and a more predictable production rhythm, supporting higher machine uptime and improved throughput in batch and single-piece flow alike. Design details that simplify process planning The square geometry with a 0.8 mm corner radius and a 90° included angle provides a clear mix of strength and accessibility for finishing and light roughing passes. The double-sided chipbreaker enhances chip control and contributes to consistent surface quality; when combined with the ISO format, it eases inventory management since the insert fits widely used SNMG holders. Dimension and relief specifications follow ISO standards, so selection of the correct holder is primarily guided by form, clearance angle, tolerance class, mounting method and thickness. Practical use and economic advantage in steel machining For turning of medium to heavy steels, the T9225 grade is formulated to tolerate slightly interrupted cuts and variable stability at the tool tip, offering longer life than more brittle grades in comparable conditions. Fewer tool changes reduce handling time and scrap risk. When paired with an appropriately rigid holder and optimised cutting data, the insert supports improved process reliability and consistent surface finish, helping to lower overall manufacturing cost per component while maintaining machining precision. For availability, technical consultation or to source Tungaloy SNMG 120408 inserts, contact Metav Werkzeuge: info@metav-werkzeuge.com or call +49 2822 7131930 — our advisors provide application-oriented recommendations and compatibility checks Technical data Article number: 6780745 Manufacturer SKU: TUN6780745 SKU: 6780745-Tungaloy Core data ISO designation: 120408 Size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 90° Relief angle: 0° Features Shape: square Hole: with cylindrical hole Grade: T9225 Coating: CVD-coated carbide Chipbreaker: double-sided Application: turning Model series: ISO turning indexable inserts FAQ What materials is this insert suitable for? The SNMG120408 insert with T9225 grade is intended primarily for medium to heavy steel machining and performs well under slightly interrupted cut conditions. Is the insert single- or double-sided? This SNMG insert is double-sided, offering two positive cutting edges per index and supporting economical tool usage. What is the corner radius and included angle? The insert has a 0.8 mm corner radius and a 90° included angle, suitable for a range of finishing and light roughing tasks. How does the T9225 grade affect performance? The T9225 CVD-coated carbide grade provides increased toughness for variable engagement and helps maintain edge integrity under medium to heavy turning loads. Which holders are compatible with this insert? Compatibility depends on holder form, clearance angle, tolerance class, mounting method, size and thickness; select a holder designed for ISO SNMG inserts to ensure correct fit. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 T9225 Wendeplatten - Tungaloy
High process reliability and broad material coverage make the SNMG120408 T9225 an efficient choice for medium to heavy turning tasks; the CVD-coated carbide and double-sided chipbreaker deliver stable chip control and extended tool life. Order the insert directly via Metav Werkzeuge or consult our advisors for holder compatibility and application guidance. SNMG120408 T9225 — SNMG indexable insert for turning, Tungaloy SNMG120408 T9225 is an ISO-form indexable turning insert designed for medium to heavy steel turning, featuring a CVD-coated carbide grade and a double-sided chipbreaker CVD-coated carbide T9225 Double-sided chipbreaker 0.8 mm corner radius Cylindrical hole for secure clamping Efficient, reliable cutting performance for turning operations The insert combines a CVD-coated carbide grade with a geometry optimised for heavy-duty turning, providing consistent performance under variable engagement conditions. The T9225 grade is a robust universal option for medium to heavy steel machining, chosen where slightly interrupted cuts or changing cutting conditions demand extra toughness. The double-sided chipbreaker supports controlled chip formation, reducing rework time and improving process stability, while the 0.8 mm corner radius balances strength and edge detail to deliver durable cutting edges. Reduced setup complexity and wide holder compatibility Designed as part of an ISO-series system, the insert integrates with a wide range of standard holders; compatibility is determined by form, clearance angle, tolerance class, attachment method, size and thickness. The cylindrical hole enhances secure clamping and repeatability in fixture systems, which supports predictable tool life and easier indexation. Clear numerical dimensions—such as the 12 mm inscribed circle and 4.76 mm thickness—allow straightforward selection of matching holders and clamping kits, simplifying procurement and workshop logistics. Practical selection guidance and process advantages When selecting the insert, match the chipbreaker and grade to the material and cutting stability required: T9225 offers a balance of wear resistance and toughness for steels, making it suitable for both roughing and semi-finishing. The CVD coating improves thermal and abrasive resistance under higher cutting speeds. Choosing the right combination reduces cycle times and increases overall productivity; these measurable benefits translate into lower unit costs and fewer tool changes during production runs. For application-specific advice or to place an order for the Tungaloy CVD-coated SNMG120408 T9225 insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss holder options and delivery. Technical data Article number: 6780710 SKU: 6780710-Tungaloy Manufacturer SKU: TUN6780710 Name: SNMG120408 T9225 Tungaloy indexable insert Material: Carbide Core dimensions Size (inscribed circle): 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Insert angle: 90° Features CVD-coated carbide grade T9225 Double-sided chipbreaker Cylindrical hole for clamping ISO-series indexable turning insert Application: Turning Compatibility determined by form, free angle, tolerance, attachment, size and thickness FAQ Which materials is this insert suitable for? The SNMG120408 T9225 insert is optimised for medium to heavy steel machining; the CVD-coated T9225 grade provides toughness for variable cutting conditions. Can the insert be used for interrupted cuts? Yes, the robust nature of the T9225 grade and the insert geometry make it suitable for slightly interrupted cuts and changing engagement conditions. Is the insert reversible? The insert is double-sided, allowing indexation to a fresh cutting edge and thus extending effective tool life for the SNMG120408 type. What holder characteristics are required for compatibility? Compatibility depends on holder form, clearance angle, tolerance class, attachment method, size and thickness; ensure the holder matches the ISO dimensions and the cylindrical hole clamping system. How does the chipbreaker affect performance? The double-sided chipbreaker promotes controlled chips and stable evacuation, which improves surface finish and reduces the risk of built-up edge in turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of CVD‑coated T9225 toughness, the ISO SNMG120408 form and a 0.8 mm corner radius for reliable medium‑to‑heavy steel turning; order original Tungaloy inserts directly via Metav Werkzeuge or consult Metav Werkzeuge for application advice. SNMG 120408 T9225 Tungaloy Turning Insert — ISO indexable insert for turning, CVD‑coated carbide, 0.8 mm radius The SNMG120408 T9225 is an ISO‑form indexable insert designed for external and internal turning, engineered to combine wear resistance and toughness for varying engagement conditions. CVD‑coated carbide T9225 for robust cutting ISO SNMG 120408 form for standard compatibility Double‑sided insert with cylindrical hole 0.8 mm corner radius for medium‑to‑heavy turning Engineered for stable medium‑to‑heavy steel turning The CVD‑coated T9225 grade offers a balance of hardness and toughness tailored for steel machining where intermittent cuts or varying chip loads occur. As an indexable insert in carbide, the geometry and coating provide enhanced wear resistance and stable edge life, which supports longer tool cycles and reduces unplanned tool changes. The robust coating minimises flank wear while the substrate maintains edge integrity under mechanical stress, yielding a consistent surface finish and fewer process interruptions. Designed for reliable fitment and process security The ISO form SNMG120408 ensures compatibility with holders that match the insert’s shape, relief, tolerance class, fastening and thickness. The specified 0° relief angle and the square form with a 90° included angle offer predictable engagement for straight turning passes. Correct pairing with a suitable external holder, backing shim and clamping set secures cutting forces and improves repeatability in production settings, which contributes to process reliability and predictable cycle times. Effective chip control and economical use A double‑sided configuration extends life per insert and supports economical indexing. The integrated chipbreaker design and the cylindrical hole for secure mounting improve chip formation and evacuation under typical turning conditions. For operations that alternate between steady cuts and slight interruptions, the T9225 composition provides the additional toughness required to avoid premature chipping. The result is more productive machining with fewer operator interventions and better overall efficiency. System approach and application guidance In practice, the insert is used as part of a system comprising the ISO insert, a matching external holder or boring bar, a backing shim/clamp and replacement screws. This system perspective helps maintain correct clamping and thermal stability during turning. The moderate 0.8 mm corner radius offers a compromise between edge strength and edge sharpness, suitable for both roughing and semi‑finishing in steel. For selection, match the chipbreaker and grade to the material, feed and stability of the setup to exploit the full benefits of the insert. Discuss machining requirements with Metav Werkzeuge for tailored recommendations and to obtain original Tungaloy SNMG120408 T9225 turning inserts via Metav Werkzeuge; contact info@metav-werkzeuge.com or call +49 2822 7131930 for support. Technical data Article number: 6780961 Manufacturer SKU: TUN6780961 Material: carbide Grade/coating: T9225 (CVD‑coated) Form: SNMG120408 Data Corner radius: 0.8 mm Inscribed circle / size: 12 mm Plate thickness: 4.76 mm Included angle: 90° Relief angle: 0° Special features Double‑sided chipbreaker Cylindrical hole for secure mounting ISO‑compatible SNMG form Grade geared to medium‑to‑heavy steel turning Suitable for external and internal turning FAQ What applications suit this insert best? The SNMG120408 T9225 Tungaloy turning insert is intended for external and internal turning, particularly in medium‑to‑heavy steel applications where intermittent cuts or variable engagement demand a tougher grade. Is this insert compatible with standard SNMG holders? Yes; the insert uses the ISO SNMG120408 form and fits holders that match the insert’s shape, fastening and thickness. Correct holder selection ensures clamping stability and repeatable results. How does the T9225 grade perform compared with general‑purpose grades? The T9225 CVD‑coated carbide grade emphasises toughness and wear resistance for changing engagement conditions, offering improved edge life in interrupted or heavier cutting compared with softer finishing grades. Can the insert be rotated to extend life? The double‑sided design allows indexing to a fresh cutting edge, effectively doubling the available edges per insert and improving cost efficiency in production. What does the 0.8 mm corner radius influence? A 0.8 mm corner radius balances edge strength and surface finish; it is suited for combined roughing and semi‑finishing where a robust edge is required without excessive cutting forces. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNMG 120408 T9225 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide and the T9225 universal grade together with the 90° geometry to secure stable performance in medium-to-heavy steel turning; order the SNMG120408 T9225 insert directly via Metav Werkzeuge or consult our specialists for application-specific guidance. SNMG120408 T9225 turning insert by Tungaloy — CVD-coated carbide, 90° for turning The SNMG120408 T9225 Tungaloy insert is an ISO-standard square indexable insert designed for general turning operations, offering a robust universal grade for medium-to-heavy steel machining. CVD-coated carbide for extended life Universal T9225 grade for medium-heavy steel 0.8 mm corner radius for robust cutting Double-sided chipbreaker, square 12 mm Stable cutting performance for variable conditions The CVD-coated carbide substrate of this insert, combined with the T9225 grade, delivers a balance of hardness and toughness that is especially suited to medium-to-heavy steel machining where engagement conditions vary or cuts are slightly interrupted. The coating enhances wear resistance at elevated temperatures, while the substrate tolerates shock loads; together these attributes reduce flank wear and maintain dimensional accuracy over longer tool life. This translates into fewer indexings and more consistent cycle times on production parts, supporting predictable process planning. Geometry that supports accuracy and clamping security A true benefit of the design is the 90° geometry and square 12 mm form, which provide a stable cutting edge orientation for facing and straight turning. The 0.8 mm corner radius increases edge strength without sacrificing form accuracy, helping to avoid premature chipping in tougher cuts. With a 4.76 mm thickness and a cylindrical hole, the insert seats securely in compatible holders; compatibility depends on holder form, relief angle, tolerance class, fixing method, size and thickness, so matching the insert to the correct external holder or boring bar ensures repeatable clamping and reliable performance. Practical system integration and chip control The insert is double-sided with an integrated chipbreaker, enabling two usable edges per mounting position and effective chip control across common turning regimes. The double-sided chipbreaker aids in fragmenting chips for improved evacuation and reduced recutting, which benefits both manual and automated setups. Typical system assembly includes the ISO insert, a suitable external holder or boring bar, the clamping pad or set and replacement screws; selecting the correct chipbreaker and grade is essential for stable cutting and surface quality. Productivity gains and process security By combining a robust grade with a wear-resistant coating, this insert supports productive machining and stable chip control, reducing unplanned tool changes and improving overall throughput. The Tungaloy development focus on modern carbide grades means reliable edge life and consistent results across batch work and one-off production. For operations seeking to balance tool life, surface finish and resistance to interrupted cuts, this insert offers a technically balanced solution that contributes to efficient machining cycles and predictable tool performance. For detailed application advice or to request the SNMG120408 T9225 insert from Metav Werkzeuge, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and swift supply. Technical Data Article number: 6781244-Tungaloy Manufacturer SKU: TUN6781244 Manufacturer article number: 6781244 Manufacturer: Tungaloy Facts Designation: SNMG120408 Grade: T9225 Material: Carbide (CVD-coated) Application: Turning Special features Shape: Square Size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 0° Hole: with cylindrical hole Chipbreaker: double-sided Geometry: 90° FAQ Which materials is this insert intended for? The SNMG120408 T9225 insert is designed primarily for medium-to-heavy steel machining; the T9225 grade and CVD-coated carbide construction offer a broad coverage for common steel types. How is holder compatibility determined for this insert? Compatibility depends on holder form, relief angle, tolerance class, fixing method, size and thickness; ensure the external holder or boring bar matches the SNMG120408 dimensions and mounting style. What benefit does the double-sided chipbreaker provide? The double-sided chipbreaker on the SNMG120408 improves chip fragmentation and evacuation, which supports stable cutting, safer chip flow and better surface finish in many turning operations. Does the geometry suit interrupted cuts or unstable engagement? Yes; the T9225 grade offers added toughness, and the 0.8 mm corner radius together with the insert geometry help withstand slight interruptions in the cut while maintaining edge stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 T9225 Wendeplatten - Tungaloy
Benefit from the combination of a CVD-coated carbide grade T9225 and a 0.8 mm corner radius for stable chip formation and reliable performance in medium to heavy turning tasks; order directly via Metav Werkzeuge or consult our specialists for holder compatibility and availability. SNMG 120408 T9225 SNMG turning insert by Tungaloy — CVD-coated carbide, 0.8 mm radius SNMG120408 T9225 is an ISO-standard square indexable turning insert designed for robust performance in steel turning applications, combining a tough CVD coating with geometry suited to variable engagement conditions ISO-standard square indexable insert SNMG CVD-coated carbide grade T9225 0.8 mm corner radius for controlled finish Double-sided chipbreaker for consistent chips Consistent cutting performance for medium to heavy steel turning The combination of CVD-coated carbide and the T9225 grade delivers a balance of wear resistance and toughness that is particularly effective in medium to heavy steel turning. This material and coating choice improves tool life under variable cutting conditions and when brief interruptions in the cut occur. The corner radius 0.8 mm helps to maintain edge stability and surface finish, reducing the need for frequent edge changes and supporting a more economical production flow. Secure clamping and ISO compatibility for repeatable set-ups The insert's square form with a 90° shape and the specified dimensions ensure compatibility with ISO holders when the shape, relief angle, tolerance class, clamping and thickness match the toolholder. The 0° relief angle and the cylindrical hole support reliable locating and repeatable seating in the pocket, which reduces run-out and supports consistent cutting forces. This geometry simplifies set-up checks and contributes to predictable, repeatable machining results. Predictable chip control and tool system integration With a double-sided chipbreaker and a plate thickness of 4.76 mm, the insert is designed to manage chips effectively across a range of feeds and depths, helping to avoid built-up edge and to maintain reproducible surface quality. The insert is intended to be used within a complete system comprising the ISO indexable insert, a matching external holder or boring bar, and the correct underlay/clamping set with replacement screws. This system approach supports safe clamping, quick indexability and reduced process downtime. Contact Metav Werkzeuge today for stock, compatibility checks and application advice regarding the SNMG 120408 T9225 insert and tailored holder recommendations Technical data Article number: 6780820 SKU: 6780820-Tungaloy Manufacturer SKU: TUN6780820 Model series: ISO indexable turning inserts Material: carbide Grade/coating: T9225 (CVD-coated) Facts Corner radius: 0.8 mm Thickness: 4.76 mm Inscribed circle / size: 12 mm Shape: square (90°) Relief angle: 0° Hole: with cylindrical hole Special features CVD-coated cemented carbide grade T9225 Double-sided chipbreaker ISO SNMG120408 geometry Designed for medium to heavy steel turning System components: insert, matching holder/boring bar, underlay/clamping set and replacement screws FAQ What steels is this insert designed for? The SNMG120408 T9225 Tungaloy insert is formulated for medium to heavy steel turning, offering a balance of toughness and wear resistance suited to varying engagement conditions. How does the T9225 grade affect tool life? The T9225 CVD-coated carbide grade emphasises toughness and stable chip formation; in practice this leads to longer tool life under interrupted cuts and more consistent performance compared with less tough grades. Is the insert compatible with standard SNMG holders? Compatibility depends on holder specifications; the insert follows ISO SNMG geometry, so matching shape, relief angle, tolerance class, clamping, size and thickness with the holder ensures correct fit and repeatability. How many usable edges does the insert provide? The insert features a double-sided chipbreaker and square form, allowing indexability and multiple cutting edges per insert depending on the mounting and indexing practice used in the tool system. What components are required for a complete tool assembly? A complete assembly includes the ISO indexable insert, a suitable external holder or boring bar, the correct underlay/clamping set and appropriate replacement screws to secure the insert reliably. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of robust CVD-coated carbide and a universal T9225 grade for reliable medium-to-heavy steel turning; the square SNMG geometry with a 0.8 mm corner radius supports stable cuts and predictable tool life. Order the SNMG120408 T9225 insert directly via Metav Werkzeuge or ask our consultants if needed. SNMG120408 T9225 Tungaloy SNMG indexable turning insert – CVD-coated carbide for medium-to-heavy turning, 0.8 mm corner radius, 90° SNMG120408 T9225 is an ISO-standard indexable insert engineered for external and internal turning applications where a robust universal grade is required; compatible holders are determined by form, clearance angle and size CVD-coated carbide for robust wear resistance Universal T9225 grade for medium to heavy steel Square SNMG form with 90° cutting geometry Double-sided chipbreaker, cylindrical hole fit Consistent performance for demanding steel turning The T9225 grade is a CVD-coated carbide engineered as a robust universal solution for the medium to heavy steel sector. This composition balances wear resistance and toughness so the insert sustains repeated engagement under variable conditions and slightly interrupted cuts. The result is more reliable tool life and reduced unplanned downtime, as the cutting edge maintains its integrity across standard turning operations. The engineered coating also supports heat resistance at elevated cutting speeds, contributing to steady component quality and predictable production throughput. Precise geometry and ISO compatibility for stable setups Designed to the ISO plate family, the square SNMG geometry delivers a 90° cutting approach that is advantageous for facing and shoulder turning. Critical compatibility is governed by form, 0° clearance, tolerance class, clamping and the plate’s dimensions — here 12 mm across with a plate thickness of 4.76 mm and a 0.8 mm corner radius. The insert features a cylindrical hole for secure locating; when matched with a correctly specified external holder and clamping set, the system ensures repeatable positioning and consistent surface finish. These measurable parameters simplify selection and reduce the need for trial-and-error adjustments on the shop floor. Controlled chips and economical operation A double-sided chipbreaker improves chip control and allows the insert to be indexed, thereby doubling the available cutting positions and improving tooling economy. The indexable design reduces inventory complexity and shortens machine downtime for tool changes. In a production setting this translates into fewer interruptions and lower process costs per component. Combined with the insert’s robust carbide body, the chip geometry supports reliable evacuation in common steel turning tasks, reducing the risk of rework and helping to maintain throughput targets. For application-specific advice on machining with Tungaloy’s T9225 inserts and to check availability through Metav Werkzeuge, contact info@metav-werkzeuge.com or call +49 2822 7131930 for prompt consultation and order support Technical data Article number: 6780981 Manufacturer article number: 6780981 Manufacturer SKU: TUN6780981 SKU: 6780981-Tungaloy Model series: ISO-Drehwendeschneidplatten Geometry: SNMG120408 Facts Corner radius: 0.8 mm Plate size: 12 mm Plate thickness: 4.76 mm Clearance angle: 0° Cutting angle: 90° Special features Material: carbide Coating / grade: T9225 (CVD-coated) Plate form: square Hole: with cylindrical hole Chipbreaker: double-sided Typical application: turning System components: insert, external holder, clamping set, replacement screws FAQ What materials is this insert suited for? The SNMG120408 T9225 insert is designed as a robust universal grade for medium to heavy steel machining; the T9225 composition provides the toughness and wear resistance suited to those materials. How is holder compatibility ensured? Compatibility depends on the insert’s form, clearance angle, tolerance class, clamping method, size and thickness. Match the SNMG120408 geometry and the 0° clearance specification with a corresponding external holder and clamping set. What is the corner radius and why does it matter? This insert has a 0.8 mm corner radius; the radius influences edge strength and surface finish, offering a balance between robustness and precision for shoulder and general turning operations. Does the insert have a hole and what type is it? Yes, the plate is supplied with a cylindrical hole, enabling secure locating and clamping in ISO-compatible holders. What advantages does the coating deliver? The CVD coating on the carbide base enhances wear resistance and thermal stability, supporting consistent edge life in medium-to-heavy steel turning and helping to maintain component quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 T9225 Wendeplatten - Tungaloy
Die robuste CVD-bonded carbide grade T9225 combines toughness and wear resistance for reliable medium-to-heavy steel turning; the ISO SNMG120408 format ensures straightforward replacement and compatibility with standard holders. Order directly via Metav Werkzeuge or consult the technical team for matching holders and spare screws. SNMG120408 T9225 ISO turning insert for turning by Tungaloy — CVD-coated carbide, 0.8 mm radius The SNMG120408 T9225 is an ISO-compliant, square indexable insert developed for external and internal turning applications, offering a robust universal grade suited to changing cutting conditions and light interruptions in the cut. CVD-coated carbide grade T9225 Robust universal grade for steel turning 0.8 mm corner radius for versatile profiling Double-sided with cylindrical hole for mounting Consistent edge life through CVD coating and grade selection The insert is manufactured from carbide with a CVD coating, producing a hard, thermally stable surface that supports higher cutting temperatures and improved wear resistance. The T9225 grade is tuned for a balance of toughness and abrasion resistance, which means the tool maintains a stable cutting edge under variable engagement and light interruptions. This characteristic translates into fewer indexings and predictable tool-change intervals, helping to keep production flows steady and reducing unplanned downtime. The combination of substrate and coating is especially beneficial when machining various steels where chip control and edge strength are priorities. Clear guidance on compatibility and secure mounting Compatibility with toolholders is governed by the ISO form, clearance angle, tolerance class, fixing method, size and thickness. The SNMG120408 conforms to ISO dimensions and is designed for secure clamping via its cylindrical hole and single-screw fixation in approved holders. Key measurable parameters such as corner radius 0.8 mm, 4.76 mm thickness, 12 mm size, and a 90° nose angle determine seating and cutting geometry; the listed 0° clearance influences how the insert contacts the workpiece and the holder. Selecting the correct chipbreaker and grade in line with workpiece material and machine stability ensures optimal performance and reduces the risk of chatter or premature edge failure. Practical advantages in everyday turning operations The double-sided insert offers two usable edges per side, effectively extending tool life and cost efficiency. The double-sided chipbreaker supports consistent chip formation and evacuation, which is advantageous when turning medium to heavy steels under varying conditions. As part of a complete system—indexable insert, suitable holder, underlay/clamping set and spare screws—this format enables quick replacement and simple inventory management. The square form and robust grade make it suitable for finishing and semi-finishing passes where a compromise between edge strength and surface quality is required. The result is a reliable component for productive machining with a focus on repeatable results. For technical availability and tailored holder recommendations for the Tungaloy CVD-coated SNMG120408 T9225 insert, contact Metav Werkzeuge for expert advice: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6781367 Manufacturer SKU: TUN6781367 Model series: ISO turning indexable inserts Material: Carbide Grade: T9225 Core dimensions Corner radius: 0.8 mm Thickness: 4.76 mm Insert size: 12 mm Nose/lead angle: 90° Clearance angle: 0° Special features CVD-coated carbide substrate Double-sided chipbreaker Cylindrical hole for screw clamping Square insert form Designed for turning of steel (medium to heavy) ISO format SNMG120408 Compatible with standard ISO holders determined by form, clearance, tolerance, fixing, size and thickness FAQ What materials is this insert intended for? The SNMG120408 T9225 insert is specified for medium to heavy steel turning; the T9225 grade and CVD coating provide a balance of toughness and wear resistance for these applications. How is the insert secured in the holder? The insert features a cylindrical hole and is designed for single-screw clamping in compatible ISO holders; ensure the holder matches the insert size, thickness and tolerance class. Does the insert provide multiple cutting edges? Yes, the SNMG120408 is double-sided, offering multiple usable edges to extend the service life before indexing. What does the 0.8 mm corner radius mean in practice? A 0.8 mm corner radius gives a modest edge rounding that helps distribute cutting forces and improves surface finish without excessive tool load, suitable for general profiling and form turning. Is this insert suitable for interrupted cuts? The T9225 grade is formulated with elevated toughness to tolerate light interruptions and variable engagement, offering more resilience than purely wear-resistant grades. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 T9225 Wendeplatten - Tungaloy
Benefit from the combination of robust CVD-coated grade T9225 and ISO SNMG120408 geometry for reliable medium-to-heavy steel turning; the insert’s double-sided design and standard hole ensure flexible integration into common holder systems. Order the SNMG120408 T9225 indexable insert directly via Metav Werkzeuge or request application advice from the technical team. SNMG 120408 T9225 — ISO indexable turning insert, CVD-coated carbide by Tungaloy for turning The SNMG120408 T9225 is an ISO indexable turning insert designed for medium-to-heavy steel machining, offering a robust CVD-coated carbide grade for interrupted and variable cutting conditions. ISO SNMG 120408 geometry for standard holders CVD-coated carbide grade T9225 for steel 0° clearance and 0.8 mm corner radius Double-sided insert with cylindrical hole Consistent performance through a robust CVD-coated grade The CVD-coated cemented carbide grade T9225 combines toughness and wear resistance to maintain cutting-edge integrity under varying engagement and lightly interrupted cuts. This universal grade is developed for medium-to-heavy steel machining and provides extended tool life where toughness is required alongside wear protection. By choosing a CVD surface treatment, the insert reduces abrasive wear and helps maintain consistent cutting conditions, which supports predictable cycle times and stable part tolerances. Easy integration with ISO-compliant holders and standard tooling Designed to ISO SNMG120408 dimensions, this indexable insert fits common external toolholders and boring bars when matched for form, clearance, tolerance class, clamping method, size and thickness. Key dimensions are 12 mm plate size, 4.76 mm plate thickness and a 0.8 mm corner radius; the insert features a cylindrical hole and a double-sided layout for economical indexability. The standard geometry and hole style simplify stocking and reduce setup time, enabling quicker tool changes and consistent fixture compatibility across existing turning systems. Tailored for steel operations and variable cutting conditions The grade and chipbreaker selection suit turning operations on various steel grades where fluctuating engagement or interrupted cuts occur. The double-sided chipbreaker arrangement increases effective cutting edges per insert and supports efficient chip control, which is particularly beneficial in medium-to-heavy passes. For stable process results, pair the insert with a matching holder, appropriate shim or clamp set, and correct fastening hardware as dictated by the system build to ensure repeatable clamping and optimum cutting parameters. Practical benefits for workshop productivity and process reliability Using an ISO indexable insert of this specification yields measurable advantages in production environments: reduced downtime due to reversible edges, simplified inventory management through a standard SNMG format, and a balance between toughness and wear resistance that lowers the risk of unexpected tool failure. The overall system—insert, holder and clamping components—allows economical machining by increasing the number of usable cutting edges and supporting consistent surface finish and dimensional repeatability. Contact Metav Werkzeuge for application-specific cutting data, availability of the Tungaloy SNMG120408 T9225 insert and tailored recommendations for integration into existing turning systems Technical data Article number: 6780716 SKU: 6780716-Tungaloy Manufacturer article number: TUN6780716 Manufacturer: Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Coating / Grade: T9225 Facts ISO designation: SNMG120408 Plate size: 12 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Main angle: 90° Hole: with hole Hole style: cylindrical hole Special features CVD-coated cemented carbide Double-sided insert ISO indexable geometry for standard holders Intended application: Drehen (turning) Robust universal grade for medium-to-heavy steel machining FAQ What are the key dimensions of this insert? The SNMG120408 T9225 insert has a plate size of 12 mm, a thickness of 4.76 mm and a corner radius of 0.8 mm; it conforms to the ISO SNMG120408 geometry. Which materials is this grade suitable for? The Tungaloy T9225 grade is a CVD-coated cemented carbide developed for medium-to-heavy steel machining, offering toughness for interrupted cuts and good wear resistance. Is the insert reversible and how is it fixed? This is a double-sided ISO indexable insert with a cylindrical hole for standard fastening; the double-sided design increases the number of usable edges. Which holders are compatible with this ISO geometry? Compatibility is determined by insert form, clearance angle, tolerance class, clamping method, size and thickness; the SNMG120408 fits common external holders and boring bars designed for SNMG inserts. What cutting conditions are recommended for best results? The T9225 grade performs well in variable engagement and lightly interrupted cuts on steel; pair the insert with a matching chipbreaker and appropriate clamping to achieve consistent surface finish and tool life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 T9225 Wendeplatten - Tungaloy
Combining CVD‑coated carbide construction with the T9225 universal grade and a 0.8 mm corner radius, this insert delivers reliable performance for medium to heavy steel turning; order genuine Tungaloy SNMG120408 inserts via Metav Werkzeuge or consult their specialists for application guidance. SNMG 120408 T9225 Turning Insert — Tungaloy, ISO turning insert for steel machining The SNMG120408 T9225 is an ISO‑standard indexable turning insert designed for robust external and internal turning of steel, offering high toughness for variable cutting conditions. CVD-coated carbide for long tool life Robust universal grade T9225 for steel turning 0.8 mm corner radius for stable roughing ISO SNMG120408, 90° geometry, cylindrical hole Maximise cutting reliability in medium to heavy steel turning The combination of CVD‑coated carbide and the T9225 grade yields a wear‑resistant and tough cutting edge suitable for demanding operations. This composition provides extended tool life and consistent performance under variable engagement conditions, which reduces downtime for insert changes and supports higher overall productivity. The grade’s toughness is particularly advantageous when light interruptions or fluctuating cutting forces occur, since the substrate and coating balance wear resistance with chipping resistance. Interchangeability and geometry that match workshop systems Being an ISO‑standard SNMG insert, compatibility depends on matching the holder by form, relief (0° relief angle), tolerance class, fastening, size and thickness. The insert’s 90° approach angle, 0° relief, 0.8 mm corner radius and 4.76 mm thickness ensure a predictable cutting geometry in suitably rated external or internal holders. The cylindrical hole and double‑sided chipbreaker allow secure fastening and economical use of both cutting edges. This standardisation supports fast changeovers and simplifies tool inventory management in production environments. Practical benefits for process security and surface quality Designed for turning operations, the insert’s chip control and edge stability contribute to improved surface finish and reliable cycle times. Selecting the correct chipbreaker variant and the T9225 grade for the workpiece material and machine rigidity will help to achieve process security and reduce the need for corrective machining. For workshops aiming to increase throughput while keeping repeatability high, this insert offers a balanced solution: toughness for interrupted cuts and sufficient hardness for wear resistance, resulting in fewer unscheduled tool changes and stable part quality. Contact Metav Werkzeuge to discuss the best holder and chipbreaker combination for specific applications or to order genuine Tungaloy SNMG120408 inserts: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: 6944735 Manufacturer SKU: TUN6944735 SKU: 6944735-Tungaloy Model series: ISO turning indexable inserts Designation: SNMG120408 Facts Geometry: 90° Relief angle: 0° Corner radius: 0.8 mm Insert size: 12 mm Thickness: 4.76 mm Hole: with cylindrical hole Chipbreaker: double-sided Special features Grade: T9225 Material: CVD-coated carbide Application: external and internal turning Recommended for: medium to heavy steel machining Compatibility determined by form, relief, tolerance class, fastening, size, thickness FAQ Is this insert suitable for external and internal turning? The SNMG120408 T9225 insert is intended for both external and internal turning and is supplied with a double‑sided chipbreaker to accommodate a range of turning tasks. Which materials is the T9225 grade best suited for? The T9225 grade is a robust universal grade optimised for medium to heavy steel machining, offering a balance of toughness and wear resistance for varying cutting conditions. How does the geometry affect holder selection? Compatibility requires a holder that matches the SNMG form, 90° geometry, 0° relief angle, thickness (4.76 mm) and the insert’s fastening method; these factors determine correct seating and clamping in the toolholder. Can the insert handle interrupted cuts? Thanks to the toughness of the T9225 grade and the carbide substrate with CVD coating, the insert tolerates light interruptions better than harder, less tough grades. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 T9235 Wendeplatten - Tungaloy
Benefit from the combination of reliable wear resistance, stable chip control and ISO compatibility to maintain steady turning processes even under interrupted or unstable cutting conditions. Order the SNMG120408 T9235 indexable insert directly via Metav Werkzeuge or consult our technical advisors if required. SNMG120408 T9235 — SNMG ISO turning insert, CVD-coated carbide, Tungaloy The SNMG120408 T9235 is an ISO‑standard square indexable insert for turning, optimised for external and internal turning of steel where interrupted cuts or unstable conditions occur. ISO‑standard square insert SNMG120408 CVD‑coated carbide grade T9235 Double‑sided chipbreaker for interrupted cuts 12 mm size, 0° clearance angle, 90° cutting edge Stable chip control for interrupted and unstable cutting The combination of a double‑sided chipbreaker and the T9235 carbide grade ensures consistent chip formation in challenging turning operations. The chipbreaker geometry reduces the risk of built‑up edge and erratic chip flow, which is particularly beneficial when machining steel under variable conditions. This feature supports longer productive periods between indexings and reduces process interruptions, translating technical design into measurable shop‑floor reliability. ISO compatibility and simple integration into existing tool systems Being part of the ISO turning indexable insert family, the plate integrates with holders that match form, clearance, tolerance class, fastening and thickness. The nominal dimensions — 12 mm inscribed circle and 4.76 mm thickness — plus the central cylindrical hole facilitate secure locating and clamping in standard external holders or boring bars. This dimensional conformity simplifies tool changeover and reduces set‑up time, enabling rapid return to machining without custom adaptation. Durable cutting performance from CVD‑coated carbide The CVD‑coated carbide substrate provides improved wear resistance while the T9235 grade is formulated for toughness. This balance makes the insert suitable for lower cutting speeds where stability is limited and for operations with frequent interruptions. The coating delays flank wear and helps maintain a sharp cutting edge, so each indexed position yields consistent surface finish and predictable tool life, enhancing process economy without compromising part quality. Geometry tailored to general turning applications The square plate shape with a 0.8 mm corner radius and a 90° main cutting edge offers a good compromise between strength and versatility for external and internal turning. The 0° clearance angle supports straightforward geometry for a broad range of turning tasks. As part of a complete system — indexable insert, matching external holder or boring bar, shim/clamping set and replacement screws — the plate enables reliable mounting and repeatable performance across batches. Choosing the correct holder and clamping torque ensures the insert works within its design envelope for optimal results. Contact Metav Werkzeuge for technical advice or to confirm compatibility and availability for the Tungaloy SNMG120408 T9235 indexable insert; our specialists will assist with application details and lead time Technical data Article number: 6785885 SKU: 6785885-Tungaloy Manufacturer SKU: TUN6785885 Model series: ISO‑Drehwendeschneidplatten Manufacturer: Tungaloy Facts Size (inscribed circle): 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Main cutting edge angle: 90° Grade: T9235 Special features Material: carbide Coating: CVD‑coated Shape: square Hole: with cylindrical hole Chipbreaker: double‑sided Application: turning (external and internal) Optimised for steel, interrupted cuts and unstable conditions FAQ Is this insert suitable for machining steel under interrupted cuts? Yes. The SNMG120408 T9235 insert uses a tough T9235 grade with a CVD‑coating, which is specifically intended for steel at lower cutting speeds and performs well under interrupted or unstable cutting conditions. What are the main dimensions and geometry of the insert? The SNMG120408 has a 12 mm inscribed circle, a thickness of 4.76 mm, a corner radius of 0.8 mm and a 90° main cutting edge; it is a square, double‑sided indexable insert with a cylindrical locating hole. Which tool holders are compatible with this insert? Compatibility is determined by ISO form, clearance, tolerance class, fastening, size and thickness; the SNMG120408 fits ISO‑standard holders and boring bars designed for square SNMG inserts when the holder accepts a 12 mm plate with a 4.76 mm thickness. Can the insert be rotated to fresh cutting edges? Yes. The double‑sided design provides multiple usable edges; careful indexing restores the cutting edge and maintains consistent performance without replacing the insert immediately. What advantages does the T9235 grade offer? The T9235 grade delivers toughness and good wear resistance due to its CVD coating, making it suitable for steel machining in less stable cutting situations and for operations with frequent interruptions. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNMG 120408 T9235 Wendeplatten - Tungaloy
Benefit from a combination of robust edge life, reliable chip control and ISO compatibility for efficient turning operations; order the SNMG120408 T9235 insert via Metav Werkzeuge or consult our specialists for matching holders and clamping solutions. SNMG120408 T9235 SNMG turning insert by Tungaloy — CVD-coated carbide, 90° square SNMG120408 T9235 is an ISO-format, square indexable insert intended for external and internal turning, engineered for interrupted cuts and unstable cutting conditions. CVD-coated carbide T9235 grade 0° clearance for stable engagement Double-sided insert with cylindrical hole 90° square geometry with 0.8 mm corner radius Reliable chip control for interrupted turning The SNMG120408 T9235 indexable insert delivers consistent chip formation even in interrupted machining thanks to its double-sided chipbreaker and robust geometry. The combination of a 90° square shape and a 0.8 mm corner radius stabilises engagement during tough cuts, reducing vibration and the risk of tool pull-out. For shops facing frequent non‑continuous cuts, this means fewer re‑setups and more predictable process windows, supporting higher overall productivity on lathes and turning centres. Longer edge life under unstable conditions The T9235 designation denotes a CVD-coated carbide grade chosen for toughness rather than maximum speed, which helps maintain edge integrity under lower cutting speeds and variable stability. The CVD coating provides wear resistance at the coating/substrate interface and improves heat management at the cutting edge, so the insert sustains usable life in conditions where a harder, more brittle grade would chip. This balance of toughness and protection translates into a favourable cost‑per‑part ratio for medium‑duty steel turning. ISO compatibility and straightforward tool changeover Built to the ISO standard, the insert suits common external holders and boring bars; compatibility depends on form, free angle, tolerance class, fastening, size and thickness. The insert’s cylindrical hole and standard dimensions (12 mm square, 4.76 mm thickness) enable rapid indexing and secure clamping with typical clamp sets and replacement screws. The standardised format simplifies tool inventory and reduces changeover time, helping maintain machining continuity across different workpieces and fixtures. For practical selection and to ensure the SNMG120408 T9235 insert is matched to the right holder and chipbreaker for each application, contact Metav Werkzeuge for technical advice and supply. Technical data Article number: 6785810 Manufacturer SKU: TUN6785810 Internal SKU: 6785810-Tungaloy Model series: ISO-Drehwendeschneidplatten ISO designation: 120408 Facts Size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Insert angle: 90° Clearance (relief) angle: 0° Special features Square insert, double-sided chipbreaker Cylindrical hole CVD-coated carbide (grade T9235) Designed for steel at lower cutting speeds Suited to interrupted cuts and unstable conditions System components: insert, matching external holder or boring bar, underlay/clamp set, replacement screws FAQ What materials is this insert designed for? The SNMG120408 T9235 insert is optimised for machining steel, with the T9235 grade selected for toughness in lower‑speed and unstable cutting conditions. Is the insert indexable and reversible? Yes — the insert is double‑sided and indexable; the square form permits multiple orientations, and the cylindrical hole supports secure clamping. Which holders are compatible with this ISO insert? Compatibility depends on matching the insert form, free angle, tolerance class, fastening method, size and thickness to the holder; the SNMG120408 follows ISO norms for straightforward pairing with standard turning holders and boring bars. How does the CVD coating affect performance? The CVD coating increases wear resistance and thermal stability at the cutting edge, helping to prolong tool life under interrupted or demanding cut conditions when using the SNMG120408 T9235 insert. Can this insert be used for internal turning as well as external turning? Yes — the ISO-format insert is suitable for both external and internal turning; selection of the correct chipbreaker and grade should reflect workpiece rigidity and the stability of the machining setup. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 T9235 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide, stable chip control and ISO compatibility to reduce tool changes and maintain steady turning cycles; order originals through Metav Werkzeuge or consult their specialists for application-specific advice. SNMG 120408 T9235 ISO turning insert — Tungaloy, CVD-coated carbide, square 12 mm The SNMG120408 T9235 is a square ISO turning insert designed for robust external and internal turning of steel where interrupted cuts and unstable conditions demand a tough grade and reliable chip control. SNMG 120408 ISO turning insert CVD-coated carbide grade T9235 Double-sided chipbreaker, reversible 12 mm square, 4.76 mm thickness Stable performance for interrupted and unstable cuts The CVD-coated T9235 grade is formulated to deliver stable chip formation and extended edge life during lower cutting speeds and discontinuous machining. By combining a tough carbide substrate with a wear-resistant coating, this insert preserves cutting-edge integrity when machining steel under unstable conditions or interrupted cuts. The result is fewer unplanned tool changes and more predictable cycle times, which supports higher machine utilisation and consistent component quality. Clear ISO compatibility for straightforward tool selection Designed to the ISO insert form SNMG120408, the geometry, 0° relief angle and tolerance class ensure compatibility with a wide range of external holders and boring bars. The square 12 mm format with a 4.76 mm thickness and a cylindrical hole enables straightforward clamping and repeatable positioning. Specifying ISO-standard inserts simplifies stock keeping and reduces the risk of mismatched holders, so turnover between inserts is quick and dependable on production lines. Operational benefits: productivity and confidence in results Using a grade optimised for demanding turning scenarios delivers measurable gains in throughput and surface quality. The double-sided design provides two usable edges per index, while the included chipbreaker geometry improves evacuation and reduces edge stress. For shops facing mixed batches or unstable set-ups, this approach lowers downtime and fosters reproducible results. The Tungaloy solution is thus a practical choice for operations seeking to combine tool life with consistent process behaviour. Contact Metav Werkzeuge for application verification, availability of original Tungaloy SNMG 120408 T9235 inserts (SKU TUN6786019) and tailored recommendations: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: 6786019 SKU: 6786019-Tungaloy Manufacturer SKU: TUN6786019 Model series: ISO turning inserts Designation (ISO): SNMG120408 Grade: T9235 Core specifications Radius: 0.8 mm Size: 12 mm square Thickness: 4.76 mm Relief angle: 0° Cutting angle: 90° Features & materials Material: carbide Coating: CVD-coated Chipbreaker: double-sided Plate shape: square Hole: cylindrical, with hole Typical application: turning (external and internal) FAQ What materials is this insert intended for? The SNMG120408 T9235 turning insert by Tungaloy is intended primarily for machining steel, with the T9235 grade optimised for lower cutting speeds and interrupted cuts. Is the insert reversible and how many cutting edges are available? Yes — the SNMG120408 is double-sided and reversible, providing two usable cutting edges per side for a total of four possible edges before replacement. Which holder types are compatible with this ISO insert? Compatibility is determined by ISO form, size, relief angle and thickness; standard SNMG external holders and appropriate boring bars that accept a 12 mm square insert with a cylindrical hole will be suitable. How does the CVD coating benefit machining performance? The CVD-coated surface on the carbide substrate improves wear resistance and helps maintain edge stability under interrupted cutting, contributing to longer tool life and more consistent surface finish. What is the original article or manufacturer SKU for ordering? The original article number is 6786019 and the manufacturer SKU is TUN6786019 for the Tungaloy SNMG120408 T9235 turning insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 T9235 Wendeplatten - Tungaloy
Combining a CVD-coated carbide grade (T9235) with a 0.8 mm corner radius and a double-sided chipbreaker delivers reliable material removal and long tool life in unstable turning conditions; order directly via Metav Werkzeuge or request guidance from our technical consultants. SNMG120408 T9235 indexable turning insert — ISO turning insert for external and internal turning by Tungaloy The SNMG120408 T9235 is an ISO-compliant, square, indexable insert designed for turning applications, especially steel machining under interrupted or unstable cutting conditions. ISO-compliant SNMG120408 geometry CVD-coated carbide grade T9235 0.8 mm corner radius for robust edge stability Double-sided chipbreaker with cylindrical hole Stable cutting under interrupted and unstable conditions The combination of a CVD-coated carbide substrate and the T9235 grade is formulated for strong edge integrity during lower cutting speeds and interrupted cuts. The coating improves wear resistance while the substrate maintains toughness, meaning fewer unplanned insert changes and more consistent cycle times. For shops facing variable clamping conditions, the robust 0.8 mm corner radius reduces the risk of edge chipping and helps maintain dimensional accuracy on external and internal turning operations. Proven ISO geometry for straightforward tool selection Using an ISO-indexed SNMG120408 geometry simplifies holder selection and CNC programming. The square 12 mm size and standardised hole pattern ensure compatibility with many ISO holders; the insert’s cylindrical-hole design secures repeatable clamping and positioning. This standardisation reduces setup time and the likelihood of incorrect insert choices, improving process reliability across batch and single-part production runs. Productivity and surface quality benefits from the chipbreaker design The double-sided chipbreaker is engineered to control chip formation for typical steels, producing predictable chips and helping to protect both the workpiece surface and the toolholder. Controlled chip evacuation reduces the need for manual chip management and contributes to a cleaner work environment. The insert’s geometry supports improved surface finish without requiring high cutting speeds, which is particularly useful when machining variable-stability components. Practical integration and selection advice for workshop use The insert forms part of a system: an ISO insert, a matching external holder or boring bar, a shim/clamping set and replacement screws. Selecting the correct chipbreaker and the T9235 carbide grade according to workpiece material and cutting regime will extend insert life and reduce overall machining cost. For steel applications with intermittent cuts or less rigid setups, this specification offers a well-balanced compromise between wear resistance and toughness. For machining tasks that demand edge stability in interrupted cuts, contact Metav Werkzeuge for matching holder recommendations and order the SNMG120408 T9235 insert through our catalogue or consult our technical team for application-specific advice. Technical Data Article number: 6785944 Manufacturer SKU: TUN6785944 SKU: 6785944-Tungaloy Designation: SNMG120408 T9235 Tungaloy insert Series: ISO-Drehwendeschneidplatten Facts Size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Free cutting angle: 0° Insert form: square Hole: with cylindrical hole Angle: 90° Double-sided chipbreaker Special features Material: carbide Coating: CVD-coated (T9235) Application: turning (external and internal) Suitable for: steel machining, interrupted cuts, unstable conditions System components: ISO insert, compatible holder or boring bar, shim/clamp set, replacement screws FAQ What steels are best machined with this insert? The SNMG120408 T9235 insert is optimised for machining steel under lower cutting speeds and in situations with intermittent cutting or reduced setup rigidity; the T9235 grade balances toughness and wear resistance for these conditions. Is the insert compatible with standard ISO holders? Yes, the SNMG120408 follows ISO geometry and the cylindrical-hole fastening ensures compatibility with many standard ISO external holders and boring bars when matched by form, clearance angle and tolerance class. How does the 0.8 mm corner radius affect performance? A 0.8 mm corner radius increases edge strength compared with finer radii, improving resistance to chipping in interrupted cuts and helping to maintain dimensional stability on turned components. Can this insert be used for finishing operations? While the insert provides good surface quality under moderate speeds, the T9235 grade is geared towards robustness in interrupted or unstable cuts; for high-finish requirements, review cutting parameters or consider a finer grade optimised for finishing. What does double-sided chipbreaker mean for tool life? A double-sided chipbreaker allows indexing to both cutting edges, effectively doubling the number of available cutting corners and contributing to cost-effectiveness and reduced tool change frequency. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 T9235 Wendeplatten - Tungaloy
Combine the CVD-coated carbide grade T9235 with the 0.8 mm corner radius and secure cylindrical hole for reliable performance in interrupted and unstable turning operations; order the SNMG120408 T9235 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. SNMG120408 T9235 Tungaloy insert — ISO square turning insert, CVD-coated carbide, 0.8 mm radius The SNMG120408 T9235 Tungaloy insert is an ISO-standard square insert intended for external and internal turning, offering a 0° relief angle and a double-sided chipbreaker for tougher steel applications. SNMG120408 ISO square insert, 12 mm size CVD-coated carbide grade T9235 for steel 0.8 mm corner radius for robust edge strength Double-sided chipbreaker, cylindrical hole Consistent metal removal through material and coating choice The combination of CVD-coated carbide and the T9235 grade provides a balance between wear resistance and toughness for machining steel at reduced cutting speeds. The CVD coating increases surface hardness and resistance to abrasion, while the substrate carbide maintains edge stability under intermittent cuts. This results in a predictable tool life and reduced tool changes, improving overall productivity and cost-efficiency in serial turning operations. Designed for straightforward integration with ISO holders As an ISO-standard insert, compatibility depends on holder geometry — form, relief, tolerance class, fastening method, size and thickness must match. The square 12 mm size and 4.76 mm thickness align with common external holders and boring bars, while the cylindrical hole ensures positive clamping. Specifying the correct holder and clamping set avoids instability and vibration, preserving surface finish and dimensional accuracy during both external and internal turning. Edge strength and chip control for less rework The 0.8 mm corner radius provides increased edge toughness and reduces the risk of chipping in interrupted cuts, making the insert well suited to unstable machining conditions. The double-sided chipbreaker helps to fragment chips and direct them away from the cutting zone, lowering the likelihood of surface damage and easing chip evacuation. Together, these features support more predictable machining cycles and fewer rework passes on demanding components. Practical application guidance and material selection The insert is recommended for turning steel where lower cutting speeds and stronger edge resilience are required. For users less familiar with grades and coatings: CVD coating means a thin ceramic layer applied over the carbide to resist wear; T9235 denotes a tough grade optimised for interrupted cutting in steels. For higher-speed or different material demands, consider inserts with alternative grades or geometries; however, for jobs with variable stability and frequent interruptions, this configuration delivers reliable outcomes. Contact Metav Werkzeuge for supply and technical advice on holder compatibility, or request tailored recommendations for specific turning tasks Technical data Article number: 6785991 Manufacturer SKU: TUN6785991 SKU: 6785991-Tungaloy Model series: ISO turning inserts Material: Carbide Data Size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Insert angle: 90° Relief angle: 0° Hole: with cylindrical hole Features Grade: T9235 (CVD-coated) Double-sided chipbreaker Square insert form ISO-standard turning insert Application: turning; suitable for external and internal turning Recommended for steel, interrupted cuts and unstable conditions FAQ What types of turning tasks suit this insert best? The SNMG120408 T9235 insert is designed for external and internal turning of steel, performing particularly well in interrupted cuts and situations with limited stability thanks to its tough T9235 grade and 0.8 mm corner radius. How does the CVD coating affect tool life? The CVD-coated carbide surface resists abrasive wear and reduces flank and crater wear, so the insert maintains cutting performance longer in abrasive steel applications compared with uncoated grades. Which holders are compatible with the SNMG120408 geometry? Compatibility depends on holder form, relief, tolerance class, fastening and the 12 mm size and 4.76 mm thickness; use holders that accept ISO SNMG inserts with a cylindrical hole for secure clamping. Can this insert be used for finishing operations? While capable of producing acceptable surface quality, the SNMG120408 T9235 is optimised for robustness in interrupted and less stable cutting; for superfine finishing, a smaller corner radius or a different grade may be preferable. Is the insert reversible or single-use per edge? The square, double-sided design provides multiple cutting edges; the insert can be indexed to present fresh edges until wear requires replacement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com