SNMG 120408 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of ISO compatibility, a CVD-coated carbide grade designed for stainless steels and a compact 0.8 mm corner radius for repeatable edge control. Order this insert directly via Metav Werkzeuge or consult our technical advisors for grade and holder matching. SNMG120408 T6215 indexable turning insert — CVD-coated carbide, 0.8 mm radius (Tungaloy) A SNMG120408 T6215 indexable turning insert engineered for external and internal turning operations, optimised for machining stainless steels under stable to lightly interrupted conditions. ISO-standard SNMG insert CVD-coated carbide grade T6215 Double-sided with cylindrical hole 0.8 mm corner radius, 90° geometry Consistent performance for stainless-steel turning The insert offers CVD-coated carbide in the T6215 grade, chosen for wear resistance when machining stainless steels. The combination of coating and substrate reduces adhesion and edge wear, which results in a more predictable tool life under steady cutting conditions. For production environments, this translates into fewer interruptions for insert changes and a stable surface finish. The design supports common turning tasks — facing, longitudinal turning and light profiling — where process stability is a priority. Secure seating and simple compatibility with ISO holders Built to the ISO SNMG120408 form, the geometry and the cylindrical hole ensure reliable clamping in conventional indexable holders or boring bars. The square plate form and standard thickness mean interchangeability across ISO-compliant tool systems; match the insert to the holder by form, relief angle, tolerance class, fastening method, size and thickness. This clarity in matching minimises setup time and supports consistent machining parameters across multiple machines. Geometry and edge control for repeatable results A 0.8 mm corner radius and a 90° plate geometry combine to deliver controlled cutting edge strength and predictable chip formation. The double-sided construction doubles the number of usable edges per insert, improving cost-efficiency in volume production. The medium-sized nose radius balances edge strength with the ability to maintain tighter tolerances on turned features, making the insert suitable for series parts where dimensional consistency matters. Productivity and material range While primarily specified for stainless steels, the grade and geometry provide flexibility for adjacent applications where similar material behaviour is encountered. The insert's construction supports steady cutting speeds and contributes to improved cycle times when used within recommended parameters. Selecting an appropriate chipbreaker and the correct grade ensures efficient swarf control and reduced risk of built-up edge during long runs. For detailed application advice on Tungaloy’s T6215 grade and to arrange supply through Metav Werkzeuge contact info@metav-werkzeuge.com or call +49 2822 7131930 for prompt assistance and delivery planning Technical data Article number: 6944758 Manufacturer SKU: TUN6944758 SKU: 6944758-Tungaloy Model series: ISO-Drehwendeschneidplatten ISO designation: SNMG120408 Facts Corner radius: 0.8 mm Plate size: 12 mm Plate thickness: 4.76 mm Relief angle: 0° Insert angle: 90° Special features CVD-coated carbide grade T6215 Double-sided chipbreaker Square plate form Cylindrical hole Suitable for turning (external and internal) Compatible with ISO holders Designed for machining stainless steels FAQ What materials is this insert suitable for? The SNMG120408 T6215 insert is specified for machining stainless steels and performs well under stable to lightly interrupted turning conditions. How is the insert secured in the holder? The insert features a cylindrical hole and standard ISO geometry; it is clamped in ISO-compatible holders using the appropriate backing pad and fastening screws. How many cutting edges does the insert provide? With its double-sided design the insert offers multiple usable edges, effectively doubling the number of index positions compared with a single-sided plate. What does the T6215 grade indicate? T6215 denotes a CVD-coated carbide grade optimised for wear resistance and reliable performance when turning stainless steels. Is the SNMG120408 compatible across different tool manufacturers? Yes; the SNMG120408 form follows ISO standards, making it compatible with ISO-compliant external holders and boring bars when matched for form, size and tolerance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide durability, precise 0.8 mm corner radius, and ISO compatibility for efficient turning of stainless steels; order directly via Metav Werkzeuge or request consultation for application matching. SNMG120408 T6215 — Indexable turning insert for turning, CVD-coated carbide, 0.8 mm radius (Tungaloy) The SNMG120408 T6215 is an ISO-standard square indexable insert designed for external and internal turning, optimised for machining stainless steels under stable to lightly interrupted conditions. ISO‑standard SNMG geometry for wide compatibility CVD-coated carbide grade T6215 for wear resistance 0.8 mm corner radius for precision finishing Double-sided chipbreaker for stable chip control Consistent tool life through CVD-coated carbide technology The CVD coating on the carbide substrate of this grade T6215 provides enhanced wear resistance during turning operations. This results in a more predictable flank wear progression and longer usable edge life compared with uncoated grades, which supports steady production rates and fewer tool changes. For machining stainless steels, the coating reduces built-up edge formation and maintains cutting-edge integrity under stable cutting conditions, helping to secure consistent part quality over longer runs. ISO geometry for straightforward holder compatibility The insert uses an ISO geometry, so compatibility with toolholders is determined by form, 0° clearance angle, tolerance class, fastening method, size and thickness. The plate thickness of 4.76 mm and the square SNMG120408 format with a cylindrical hole are standard dimensions that allow selection of matching external holders or boring bars with the correct shim and clamp set. Compatibility is focused on mechanical fit and clamping stability; the neutral 0° clearance setting is suited to many holder designs and supports secure mounting under steady cutting forces. Improved chip control and surface finish for demanding stainless steel work A double-sided chipbreaker designed into the insert helps to shape and evacuate chips reliably, which reduces recutting and aids surface integrity. The 0.8 mm corner radius contributes to a balance between edge strength and surface finish, making the insert appropriate for light profiling and finishing passes. The square form with a 90° included angle facilitates shoulder cuts and contributes to process stability where interrupted cuts are only mild; the combined geometry and chipbreaker promote repeatable part quality. Operational benefits: productivity, inventory efficiency and process stability The square, double-sided design provides multiple indexable edges, which improves cost-efficiency per cutting edge and lowers changeover frequency in production. By selecting the correct chipbreaker and the T6215 grade for the workpiece and machine rigidity, manufacturers can achieve higher productivity and a more stable process window. For applications requiring confirmation of holder fit or grade selection, Metav Werkzeuge can provide advice on matching insert geometry, chipbreaker style and clamping components to the machining set-up. Contact Metav Werkzeuge for tailored recommendations on the SNMG120408 T6215 insert, availability and matching holders; expert consultation is available to ensure optimal grade and chipbreaker selection for the intended turning application Technical data Article number: 6875744 SKU: 6875744-Tungaloy Manufacturer SKU: TUN6875744 Series: ISO turning indexable inserts Material: carbide Coating: CVD Facts Designation: SNMG120408 Corner radius: 0.8 mm Plate size: 12 mm Thickness: 4.76 mm Clearance angle: 0° Included angle: 90° Special features Grade: T6215 (wear-resistant for stainless steels) Double-sided chipbreaker Square plate with cylindrical hole ISO-standard indexable insert For external and internal turning FAQ Which materials is this insert best suited for? The SNMG120408 T6215 insert is optimised for turning stainless steels; the T6215 grade is a wear-resistant, CVD-coated carbide designed for stable to lightly interrupted stainless steel machining. How is toolholder compatibility ensured for this insert? Compatibility depends on matching the ISO geometry and mechanical dimensions: plate size 12 mm, thickness 4.76 mm, clearance angle 0°, and the cylindrical hole. The SNMG120408 designation indicates the standard form needed for compatible holders. How many usable edges does the square, double-sided design provide? The square geometry with a double-sided chipbreaker offers multiple indexable edges typical for SNMG inserts, enabling several repositions before replacement and improving cost-efficiency per edge. What cutting edge characteristics support surface finish and strength? The 0.8 mm corner radius and the double-sided chipbreaker combine to provide a balance of surface finish and edge strength suitable for finishing and light profiling when machining stainless steels with stable cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 T6215 Wendeplatten - Tungaloy
Benefit from the combination of a CVD-coated carbide grade T6215 for extended tool life and a double-sided SNMG 120408 geometry that reduces tooling costs. The ISO form guarantees straightforward interchangeability with standard holders; order directly via Metav Werkzeuge or consult our specialists for application support. SNMG120408 T6215 – ISO indexable turning insert, CVD-coated carbide, for turning | Tungaloy The SNMG120408 T6215 is an ISO-standard indexable insert for external and internal turning, designed for stable to slightly interrupted machining of stainless steels and engineered to deliver consistent surface finish and predictable tool life. CVD-coated carbide grade T6215 Optimised for stainless steel machining Double-sided chipbreaker for economy Square SNMG 120408 with cylindrical hole Longer tool life through wear-resistant coating The CVD process produces a robust coating that significantly improves resistance to adhesive and abrasive wear, so the insert maintains a balanced edge geometry for longer. The use of a carbide substrate combined with the T6215 coating grade supports higher cumulative cutting lengths under stable conditions, which reduces tool change frequency and increases uptime. For operations where surface finish and dimensional repeatability matter, this material pairing offers a reliable, measurable improvement in productivity. ISO conformity for quick interchange and reduced setup time Built to the ISO SNMG120408 form, the insert fits a wide range of commercially available holders when form, relief angle, tolerance class, fastening and thickness match. The standardised geometry ensures predictable seating and clamping behaviour, lowering setup errors and simplifying inventory management. The listed 0° rake and the square plate shape support versatile clamping options, helping workshops maintain process consistency across multiple machines. Efficient chip control and secure clamping for stable cuts A double-sided chipbreaker design provides effective chip segmentation and evacuation during turning of stainless steels, reducing built-up edge and thermal spikes. The insert’s cylindrical hole contributes to stable clamping and repeatable positioning, which is particularly advantageous for medium-feed finishing passes. Together, these features improve cycle-time reliability while keeping machining costs down through two usable edges per indexation. Practical recommendations for typical turning tasks Designed for turning applications under stable to slightly interrupted conditions, the insert is suited to both external and internal operations. Select a chipbreaker and cutting data matched to the workpiece alloy and setup rigidity; small increases in feed often yield faster material removal with minor impact on tool life when using this grade. If additional data is required—such as recommended speeds or feeds for specific stainless steel grades—Metav Werkzeuge’s technical advisors can provide tailored guidance to optimise performance. Contact Metav Werkzeuge for application advice or to request a quote for the SNMG120408 T6215 insert; email info@metav-werkzeuge.com or call +49 2822 7131930 for expert assistance and quick delivery options Technical Data Article number: 6944742 Manufacturer SKU: TUN6944742 SKU: 6944742-Tungaloy Model series: ISO indexable turning inserts ISO designation: SNMG120408 Name: SNMG120408 T6215 Tungaloy insert Facts Corner radius: 0.8 mm Plate thickness: 4.76 mm Plate size: 12 mm Relief angle (rake): 0° Included angle: 90° Design and special features Material: carbide Coating: CVD, grade T6215 Chipbreaker: double-sided Shape: square (SNMG) Hole: cylindrical (with hole) Application: turning (external and internal) Typical use: stable to slightly interrupted machining of stainless steels FAQ What materials is this insert best suited for? The SNMG120408 T6215 insert is optimised for machining stainless steels; the CVD-coated carbide provides wear resistance suited to that material group. Is the insert compatible with standard ISO SNMG holders? Yes, compatibility with ISO SNMG holders depends on matching form, relief angle, tolerance class, fastening, size and thickness; the SNMG120408 follows ISO dimensions for straightforward interchange. How does the double-sided chipbreaker affect cost-efficiency? A double-sided chipbreaker doubles the available cutting edges per insert, improving cost-efficiency by reducing the frequency of insert replacements for routine turning tasks. Does the cylindrical hole improve clamping stability? The cylindrical hole supports secure mechanical clamping and repeatable seating, which helps maintain consistent cutting conditions and dimensional accuracy. Are there recommended cutting conditions for roughing and finishing? Specific speeds and feeds depend on the stainless steel grade and machine rigidity; for tailored recommendations, Metav Werkzeuge can provide cutting data aligned to the SNMG120408 T6215 insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide durability and ISO compatibility for reliable turning of stainless steel; the double-sided chipbreaker and secure cylindrical-hole clamping keep production steady and reduce tool changes. Order this insert directly via Metav Werkzeuge or contact the consultants for application advice. SNMG120408 T6215 ISO indexable turning insert for turning (Tungaloy) The SNMG120408 T6215 is an ISO-standard indexable insert engineered for external and internal turning operations, offering a CVD-coated carbide grade optimised for machining stainless steel under stable to slightly interrupted conditions. ISO-standard SNMG120408 shape CVD-coated carbide grade T6215 Double-sided chipbreaker for chip control Cylindrical hole and 0° rake for secure clamping Longer tool life through CVD coating and robust carbide The CVD-coated carbide grade T6215 combines a hard, wear-resistant surface with a tough substrate to extend service intervals during demanding turning operations. In practice, this translates into fewer insert changes and steadier cycle times on both external and internal turning tasks. The coating improves resistance to abrasive wear and built-up edge when machining stainless steel, so downtime is reduced and productivity is sustained. This hardened surface also helps maintain cutting-edge geometry for a more consistent component finish. Reliable ISO compatibility and secure clamping for stable machining Built to the ISO specification, the SNMG120408 form ensures straightforward interchangeability with compatible holders; fit depends on form, clearance angle, tolerance class, fastening method, size and thickness. The insert features a cylindrical hole and a 0° rake angle, enabling secure seating in standard external holders or boring bars and supporting repeatable set-up. Being double-sided provides two usable cutting edges per index, which improves economy per insert while the square form and precise tolerances contribute to vibration resistance during heavier cuts. Geometry and chip control for consistent surface quality A corner radius of 0.8 mm and an integrated chipbreaker geometry deliver a balance between edge strength and surface finish. The moderate radius supports stable cutting forces and improved tool life, while the chipbreaker guides swarf away from the cutting zone to avoid recutting and tool damage. Together these elements help produce a reliable surface finish and predictable dimensional results in serial production. The insert is part of a system comprising an ISO insert, matching external holder or boring bar, backing/support and fastening screws, allowing tailored tool set-ups for the required machining task. Contact Metav Werkzeuge to discuss the SNMG120408 T6215 application and secure supply; Metav Werkzeuge specialists can advise on holder compatibility and optimal cutting parameters – eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: 6875693 Manufacturer SKU: TUN6875693 Brand SKU: 6875693-Tungaloy Manufacturer: Tungaloy Facts Insert designation: SNMG120408 ISO code: 120408 Corner radius: 0.8 mm Plate thickness: 4.76 mm Plate size: 12 mm Included angle: 90° Rake angle: 0° Hole: with hole (cylindrical hole) Plate shape: square Special features Material: carbide Coating / grade: T6215 (CVD-coated) Application: turning Chipbreaker: double-sided System: ISO indexable turning inserts, compatible with ISO holders Typical use: external and internal turning of stainless steel under stable to slightly interrupted conditions FAQ What materials is this insert suited for? The SNMG120408 T6215 insert is designed primarily for machining stainless steel; the T6215 CVD coating improves wear resistance during such operations. How many cutting edges does the insert provide? With its double-sided design, the SNMG120408 offers two usable cutting edges, which enhances economy per insert and simplifies indexing during production. Is the insert compatible with standard ISO holders? Yes, the SNMG120408 follows ISO geometry; compatibility with a holder depends on form, clearance angle, tolerance class, fastening, size and thickness of the tool system. What benefits does the T6215 grade deliver? The T6215 CVD-coated grade provides improved wear resistance and reliable cutting performance when turning stainless steel, resulting in steadier cycle times and extended tool life. Can the insert be used for interrupted cuts? The carbide substrate and the T6215 coating are suitable for stable to slightly interrupted cutting conditions, offering a good compromise between toughness and wear resistance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 T9205 Tungaloy Wendeplatten
Take advantage of a wear-resistant CVD-coated carbide grade T9205 combined with a 0.8 mm corner radius and 90° form for stable, productive turning. Order the SNMG120408 T9205 insert directly via Metav Werkzeuge or ask our consultants for integration advice. SNMG120408 T9205 SNMG — Indexable turning insert for turning, Tungaloy SNMG120408 T9205 is an ISO-format indexable insert for productive external and internal turning, designed for steel machining under stable conditions CVD-coated carbide grade T9205 For productive steel turning at higher speeds Double-sided chipbreaker for stable chip control Square 12 mm insert with 0.8 mm corner radius Engineered for productive steel turning with wear resistance The SNMG120408 T9205 insert is specified as a CVD-coated carbide grade that delivers wear resistance and consistent performance when machining steel under stable setups. The CVD coating (chemical vapour deposition) forms a hard, adherent layer on the substrate that reduces abrasive wear and improves edge life at elevated cutting speeds. For production environments this means fewer tool changes and more predictable tool life, translating into improved process efficiency and reduced downtime. Designed for reliable holder compatibility and secure mounting Belonging to the ISO insert family, compatibility with toolholders is governed by the insert form, clearance geometry, tolerance class, fixing method, size and thickness. The insert features a cylindrical hole for secure clamping and a square 12 mm form with a 4.76 mm thickness, providing a stable connection to appropriate external holders or boring bars. The specified 0° clearance angle and the 90° cutting orientation make the insert suitable for a wide range of standard turning holders, enabling straightforward integration into existing tool systems. Consistent chip control and edge robustness for stable processes A double-sided chipbreaker simplifies chip formation across a variety of cutting conditions, improving evacuation and reducing the risk of entanglement. The 0.8 mm corner radius balances edge strength and surface finish: it provides robustness against edge chipping while still permitting good workpiece quality. The insert’s square geometry and substantial plate thickness contribute to vibration damping and rigidity, helping to maintain dimensional consistency over longer production runs. Practical benefits in daily machining and maintenance As an indexable insert, the SNMG120408 reduces per-edge cost through multiple indexed cutting edges; when one edge wears, rotation or replacement is quick and straightforward, shortening machine downtime. The T9205 grade is optimised for productive turning of steel and performs best in stable clamping conditions and medium to higher cutting speeds. Explaining briefly, a chipbreaker shapes and breaks the chips into manageable segments to protect the tool and machine — a key factor in automated or long-cycle operations. Discuss the integration of the Tungaloy SNMG120408 T9205 insert with Metav Werkzeuge for tailored tooling advice and order coordination via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6785770 Manufacturer SKU: TUN6785770 SKU: 6785770-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Carbide Core specifications Insert designation: SNMG120408 Grade/sort: T9205 Corner radius: 0.8 mm Plate size: 12 mm Plate thickness: 4.76 mm Cutting angle: 90° Clearance angle: 0° Design & special features Square plate form Cylindrical hole (with hole) CVD-coated carbide substrate Double-sided chipbreaker Intended application: Turning (external and internal) ISO-format indexable insert compatible with matching holders FAQ What materials is this insert suitable for? The SNMG120408 T9205 insert is optimised for machining steel; the T9205 CVD-coated carbide provides wear resistance suitable for productive turning of steel under stable conditions. How is compatibility with existing holders determined? Compatibility depends on the insert form, clearance geometry, tolerance class, fixing method, size and thickness; the SNMG120408’s square 12 mm form, 4.76 mm thickness and cylindrical hole require holders designed for ISO SNMG inserts. Does the insert support reliable chip control? Yes, the double-sided chipbreaker on the SNMG120408 helps shape and break chips consistently, improving evacuation and reducing the risk of chip-related interruptions. What edge geometry and finish can be expected? With a 0.8 mm corner radius and a 90° orientation, the insert offers a robust edge suitable for general turning, balancing edge life and surface finish. Is the insert reversible or indexable? The insert is indexable and features multiple usable edges due to its design, allowing cost-effective rotation and reuse of edges until full replacement is necessary. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 T9205 Wendeplatten - Tungaloy
A productive turning solution that pairs CVD‑coated T9205 carbide for extended wear resistance with a 0.8 mm corner radius that stabilises cutting under higher speeds; compatible with ISO holders for straightforward indexable replacement. Order the SNMG120408 T9205 insert directly via Metav Werkzeuge or ask our consultants for application advice. SNMG 120408 T9205 turning insert by Tungaloy — CVD‑coated carbide, square 12 mm SNMG120408 T9205 is a square, ISO‑standard turning insert developed for productive external and internal turning of steel under stable cutting conditions and elevated speeds CVD‑coated, wear‑resistant T9205 grade ISO‑standard square insert, 12 mm 0.8 mm corner radius for robust cuts Double‑sided chipbreaker, reversible design Increased cutting reliability for productive turning The CVD‑coated T9205 grade combines a wear‑resistant carbide substrate with a protective coating that reduces flank wear and prolongs edge life. This material combination is designed to deliver stable chip formation and consistent performance when machining steel at higher cutting speeds under steady conditions. The result is fewer interruptions for index changes and a more predictable maintenance interval, which supports continuous production cycles and reliable process planning. Geometry and clamping that support consistent surface quality A square insert geometry with 12 mm size and 4.76 mm thickness provides a secure seating and even load distribution in standard ISO external holders. The 0.8 mm corner radius offers a compromise between edge strength and surface finish, while the 0° relief angle suits standard turning setups where rigidity is prioritised. The insert is supplied with a cylindrical hole and a double‑sided chipbreaker, allowing reversible indexing and efficient chip control; this reduces setup time and lowers the frequency of tool changes for batch production. Process efficiency, predictable tool life and application guidance Choosing this ISO‑standard insert supports an optimised turning process: the combination of CVD coating and a robust geometry reduces unplanned wear, and the reversible chipbreaker extends usable cutting edges per insert. For workshops aiming at tight repeatability and reduced downtime, this grade and form offer a cost‑effective balance of productivity and tool life. For application selection—chipbreaker type, cutting data and holder matching—technical guidance is available to ensure the insert meets the required stability and surface finish targets. For tailored advice on selecting and integrating the SNMG120408 T9205 insert into specific turning operations, contact Metav Werkzeuge for application guidance and ordering via info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: 6785670 Manufacturer SKU: TUN6785670 Internal SKU: 6785670-Tungaloy Material: carbide Series: ISO‑Drehwendeschneidplatten ISO designation: 120408 Facts Size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 0° Included angle: 90° Special features Grade: T9205 (CVD‑coated carbide) Shape: square Hole: with cylindrical hole Chipbreaker: double‑sided Application: turning ISO‑standard insert, reversible design FAQ What materials is this insert suitable for? The SNMG120408 T9205 insert is intended primarily for turning steel under stable conditions; the T9205 grade is a wear‑resistant CVD‑coated carbide optimised for productive machining of steel. How does the double‑sided chipbreaker affect tool life? A double‑sided chipbreaker allows reversible indexing, effectively doubling the number of usable edges on the insert and contributing to longer intervals between replacements for the SNMG120408 T9205. What are the key geometry values to consider for holder compatibility? Compatibility is determined by form, relief angle, tolerance class, fastening, size (12 mm) and thickness (4.76 mm); ensure the chosen ISO external holder matches these parameters for secure clamping. Can the insert be used for internal turning as well as external turning? Yes, the square form and chipcontrol design permit both external and internal turning applications, provided the machine setup offers sufficient rigidity for stable cutting conditions. Is special cooling or cutting data required for this grade? The T9205 grade tolerates elevated cutting speeds in steel when used under stable conditions; selection of coolant and cutting data should follow standard practice for CVD‑coated carbide grades and the chosen chipbreaker geometry. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNMG 120408 T9205 Wendeplatten - Tungaloy
Benefit from the combination of a CVD‑coated carbide grade for extended tool life and a 90° square geometry that enables versatile external and internal turning; order the insert directly via Metav Werkzeuge or consult our specialists for application matching. SNMG120408 T9205 – Tungaloy SNMG square indexable turning insert for turning, 90° geometry, CVD-coated carbide The SNMG120408 T9205 is a 90° square indexable insert engineered for productive external and internal turning of steel in stable machining setups CVD-coated carbide for wear resistance 90° square geometry for versatile turning 0° relief angle for secure clamping Double-sided chipbreaker with cylindrical hole Maximise uptime with a wear-resistant CVD grade The T9205 CVD‑coated carbide combines a durable coating with a robust substrate to deliver longer tool life under elevated cutting speeds. This results in fewer index changes and less downtime, which directly contributes to improved machine utilisation and lower unit costs in batch production. The coating is optimised for heat resistance and abrasion control, so the insert maintains cutting edge integrity during continuous turning. For operations that demand repeatable cycle times and predictable consumable consumption, this grade offers measurable process stability. Precise form control thanks to 90° square geometry A 90° geometry with a square profile and a 0° relief angle provides stable support in the pocket and balanced cutting engagement on both external and internal contours. The corner radius 0.8 mm reduces peak stresses while enabling reliable finishing passes where consistent surface quality is required. Explaining briefly: the relief angle keeps the insert seated firmly during cutting, while the square shape permits four usable cutting edges per index, improving economy. This combination helps to preserve dimensional accuracy and reduces the need for corrective rework. Easy integration into ISO indexable systems The insert conforms to ISO indexable insert standards and features a cylindrical hole for secure fixing. Compatibility with a chosen holder depends on form, clearance angle, tolerance class, mounting method, size and thickness; typical system components include a matching external holder or boring bar, a shim/clamp set and replacement screws. Selecting the appropriate chipbreaker and grade should be guided by the workpiece material, the machining strategy and the rigidity of the set‑up. Technical information supplied with the insert supports correct holder pairing and mounting. Targeted performance for steel turning under stable conditions Designed primarily for the productive turning of steel, the double-sided chipbreaker offers dependable chip control when operating at the intended feeds and speeds. Under stable clamping and machine conditions this insert enables higher productivity while maintaining surface finish and tool life. Where process security and repeatability matter — such as serial parts machining — these characteristics reduce scrap rates and support consistent output. For components requiring a mix of roughing and finishing, the insert’s geometry and grade offer a balanced compromise between material removal rate and edge stability. For tailored application advice, availability and fast supply of Tungaloy turning inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — Metav Werkzeuge consultants will assist with grade and chipbreaker selection as well as stock information. Technical data Article number: 6785741 Manufacturer article number: 6785741 Manufacturer SKU: TUN6785741 SKU: 6785741-Tungaloy Model series: ISO indexable turning inserts Facts ISO designation: 120408 Size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 0° Edge angle: 90° Hole: cylindrical Special features Coating: T9205 Grade: CVD-coated carbide Chipbreaker: double-sided Application: turning (external & internal) System: ISO indexable insert Shape: square With hole for secure mounting FAQ What materials is this insert optimised for? The T9205 grade is optimised for productive turning of steel; the SNMG120408 T9205 insert delivers wear resistance and heat control suited to stable steel machining operations. How many usable edges does the insert provide? As a square insert, the SNMG120408 offers four usable cutting edges per index, which improves economy by maximising edge utilisation before replacement. Which chipbreaker should be selected for mixed roughing and finishing? Choose a chipbreaker and feed rate according to the required surface finish and material removal rate; the double-sided chipbreaker on this insert supports a wide range of feeds for combined roughing and finishing in steel. Is this insert compatible with standard ISO holders? Yes, the SNMG120408 conforms to ISO indexable insert standards; compatibility depends on holder form, tolerance class, mounting method, size and thickness — use the specified system components for correct installation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 T9205 Wendeplatten - Tungaloy
Benefit from a wear‑resistant CVD‑coated carbide grade and a double‑sided chipbreaker that support productive turning at higher speeds; order the SNMG120408 T9205 directly via Metav Werkzeuge or consult the team for application advice. SNMG120408 T9205 indexable insert for turning — Tungaloy The SNMG120408 T9205 is an ISO‑format indexable insert designed for general external and internal turning applications, offering a wear‑resistant grade optimised for productive machining of steel under stable conditions. CVD‑coated carbide grade T9205 Double‑sided chipbreaker for stable cutting Square insert with 0.8 mm corner radius Cylindrical hole for secure clamping Delivering higher productivity for stable turning The insert’s CVD‑coated surface and T9205 grade of carbide are selected to extend tool life while allowing turning at elevated speeds where setup rigidity is assured. In practical terms, this means fewer index changes and longer intervals between tool replacements, which reduces downtime and contributes to a more economical machining cycle. The specification targets production environments that value repeatable component quality and steady cycle times, translating the material and coating choices directly into measurable process gains. Precision geometry for repeatable clamping and chip control A square plate form with a 0.8 mm corner radius plus a cylindrical hole ensures consistent seating and clamping in ISO‑compatible holders. The double‑sided chipbreaker design supports reliable chip formation across both edges, improving surface finish and helping to prevent chip entanglement in common turning tasks. Clear geometry tolerances—form, relief angle and thickness—make the insert predictable in assembly and performance, which helps maintain dimensional accuracy and reduces the need for frequent machine adjustments. Application range and system‑level reliability This insert is intended primarily for machining steel in stable setups and is best deployed within a complete system assembly: ISO insert, matching external holder or boring bar, suitable underlay/clamp set and replacement screws. Specifying the correct chipbreaker and grade relative to the workpiece and cutting conditions is essential; when matched correctly, the result is improved process productivity and consistent component finish. The insert’s design supports straightforward inventory handling: reversible edges extend effective life, while ISO conformity eases replacement and holder selection. For tailored application support on Tungaloy turning inserts contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific materials and machining conditions. Technical Data Article number: 6785771 Manufacturer SKU: TUN6785771 Internal SKU: 6785771-Tungaloy Model series: ISO turning indexable inserts Designation: SNMG120408 Facts Corner radius: 0.8 mm Thickness: 4.76 mm Size: 12 mm Relief angle: 0° Plate angle: 90° Hole style: cylindrical Special features Material: carbide (CVD‑coated, grade T9205) Double‑sided chipbreaker Square plate form Cylindrical hole for secure clamping Compatible with ISO holders and boring bars Intended use: turning; suitable for steel at higher cutting speeds under stable conditions FAQ Which materials is this insert intended for? The SNMG120408 T9205 insert is engineered for productive turning of steel, with the T9205 carbide grade and CVD coating optimised for wear resistance in stable machining conditions. Is the insert reversible and how many usable edges are available? The square geometry with a double‑sided chipbreaker provides reversible cutting edges; the SNMG120408 format offers multiple usable edges per insert, extending tool life before replacement. What determines compatibility with a toolholder? Compatibility depends on the insert’s form, relief angle, tolerance class, fastening method, size and thickness; the SNMG120408 follows ISO conventions to ensure fit with matching ISO holders and boring bars. How does the chipbreaker affect the machining result? The double‑sided chipbreaker on this insert promotes controlled chip formation and evacuation, improving surface finish and process stability when the correct chipbreaker is selected for the workpiece and cutting conditions. What does the grade T9205 signify in practice? Grade T9205 denotes a CVD‑coated carbide formulated for wear resistance and longer life during productive turning of steel at higher cutting speeds, particularly where setup rigidity supports steady cutting forces. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNMG 120408 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD‑coated carbide T9215, a 0.8 mm corner radius and ISO compatibility to achieve reliable, productive turning of medium steels; order directly via Metav Werkzeuge or consult our specialists for optimal holder and chipbreaker selection. SNMG 120408 T9215 ISO turning insert for turning – Tungaloy The SNMG 120408 T9215 is an ISO‑standard indexable turning insert for external and internal turning, engineered for efficient medium‑steel machining with a CVD‑coated carbide grade for high wear resistance. CVD‑coated carbide grade T9215 0.8 mm corner radius for sturdy edges Double‑sided, square plate, 4.76 mm thick Compatible with ISO 120408 turning holders High productivity through robust cutting performance The combination of a CVD‑coated surface and the T9215 carbide grade delivers enhanced wear resistance and reliable edge stability in medium‑steel applications. This composition reduces flank wear and increases tool life, which translates into fewer indexings and longer uninterrupted production runs. Designed for continuous to slightly interrupted cuts, the insert supports stable machining parameters that favour higher material removal rates and consistent surface finish without compromising component tolerances. ISO conformity and simple tool‑chain integration Presented in the ISO format SNMG 120408, the insert fits established square plate holders when matched by form, clearance angle, tolerance class, fastening and thickness. The double‑sided geometry and the cylindrical hole enable positive clamping and straightforward reversal of the cutting edge, while the 4.76 mm plate thickness ensures rigidity during heavier cuts. Where set‑up time and repeatability matter, this standardised design reduces downtime and simplifies tool inventory management across toolrooms and production lines. Predictable cutting behaviour and application guidance With a 0.8 mm corner radius, the insert provides a balanced compromise between edge strength and surface integrity, making it suitable for a broad range of turning operations on steel. The integrated chipbreaker design supports controlled chip formation, which improves evacuations and protects the workpiece and toolholder from irregular chip flow. For best results, pair the insert with a holder matched to ISO 120408 dimensions and select a chipbreaker and feed strategy that reflect the part geometry and cutting conditions. If uncertainty remains about optimal combinations, technical advice is available to match the insert to the workpiece and process demands. Contact Metav Werkzeuge for tailored advice on SNMG 120408 T9215 inserts or for assistance selecting compatible holders and clamping sets; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application‑specific recommendations. Technical data Article number: 6773891 Manufacturer SKU: TUN6773891 Model series: ISO‑Drehwendeschneidplatten Material: Hartmetall Grade: T9215 Dimensions & key figures Corner radius: 0.8 mm Plate thickness: 4.76 mm Plate size: 12 mm Included angle: 90° Clearance angle: 0° Design & special features Square plate, double‑sided chipbreaker With cylindrical hole ISO designation: SNMG120408 Application: external and internal turning Recommended for medium steel machining; continuous to slightly interrupted cuts FAQ What materials is this insert suitable for? The SNMG 120408 T9215 insert is specified for medium‑steel machining; the CVD‑coated T9215 grade balances wear resistance and toughness for productive turning of steel components. How does the 0.8 mm corner radius affect machining? A 0.8 mm corner radius increases edge strength and reduces chipping risk; when using the SNMG 120408 for heavier passes, this radius helps maintain surface quality and extend edge life. Is the insert reversible and how is it clamped? The SNMG 120408 is double‑sided and features a cylindrical hole for positive clamping; the geometry allows indexation of multiple cutting edges and secure fixation in compatible ISO holders. Which chipbreaker should be selected for interrupted cuts? For slightly interrupted cuts, choose a chipbreaker suited to medium‑steel operations and the intended feed range; the SNMG 120408 supports stable chip formation when paired with a matching chipbreaker style. What must be considered when matching a holder to this insert? Compatibility depends on form, clearance angle, tolerance class, fastening type, size and thickness; ensure the holder matches ISO 120408 dimensions and provides the correct support and rigidity for the intended cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNMG 120408 T9215 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide grade T9215, a robust 0.8 mm corner radius and a secure cylindrical mounting for consistent chip control and sustained turning productivity. Order the SNMG120408 T9215 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. SNMG120408 T9215 Turning insert by Tungaloy — ISO turning insert, CVD-coated for mid‑steel applications The SNMG120408 T9215 is a square ISO turning insert engineered for productive external and internal turning in medium‑hard steels, offering a balance of wear resistance and fracture toughness for continuous to slightly interrupted cuts. CVD-coated carbide grade T9215 Double-sided chipbreaker for consistent chips 12 mm inscribed circle, square plate Cylindrical hole for secure mounting Maximise output with a wear-resistant carbide grade The combination of a CVD-coated carbide substrate and the T9215 grade provides a reliable balance between wear resistance and impact strength, which translates into longer tool life and fewer indexings in high-volume turning operations. This behaviour is particularly advantageous in longer production runs where maintaining consistent cutting parameters reduces downtime and improves throughput. The insert’s geometry and coating are optimised to handle continuous and slightly interrupted cuts, enabling sustained productivity with fewer tool changes and predictable dimensional stability. Geometry that delivers repeatable surface quality and form control A square plate with a 12 mm inscribed circle, 4.76 mm thickness and 0.8 mm corner radius gives a stable cutting edge for shoulder work and general turning, while the 90° included angle supports accurate form control on external features. The 0° relief angle ensures a neutral cutting orientation that performs well in rigid setups; combined with the double-sided chipbreaker, this yields controlled chip formation and improved surface finish. For engineers assessing process windows, these geometric constants allow straightforward calculation of feed, depth of cut and expected tool life under standard machining conditions. Designed for straightforward integration into ISO tooling systems As an ISO‑standard insert, compatibility is governed by plate form, relief angle, tolerance class, fastening style, size and thickness; this makes selection and replacement predictable across common holders and boring bars. The cylindrical hole provides secure fixation and reliable repeatability when paired with corresponding clamping kits. The double‑sided layout offers cost efficiency through two usable edges per index, and the carbide construction with CVD coating reduces flank and crater wear, simplifying process planning and inventory management for workshops seeking robust, economical solutions. Contact Metav Werkzeuge today for tailored advice on SNMG120408 T9215 inserts and holder compatibility; our consultants can recommend matching holders, clamping sets and spare screws – eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6772292 SKU: 6772292-Tungaloy Manufacturer SKU: TUN6772292 Manufacturer: Tungaloy Model series: ISO-Drehwendeschneidplatten Data Inscribed circle: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 0° Included angle: 90° Hole style: cylindrical hole Chipbreaker: double-sided Special features Material: carbide Coating: CVD-coated Grade: T9215 Shape: square plate Application: turning (external and internal) System setup: ISO insert, matching outer holder or boring bar, pad/clamp set and replacement screws FAQ Which materials is this insert suitable for? The SNMG120408 T9215 insert is optimised for medium‑range steels; the T9215 grade combines wear resistance with fracture toughness to handle standard steel machining tasks. Can the insert be used for interrupted cuts? Yes, the CVD-coated T9215 grade and the insert’s robust corner radius allow use in continuous and slightly interrupted cuts, though very heavy interruptions may require more impact‑resistant grades. How many cutting edges are available per insert? This square, double‑sided insert provides multiple usable edges by indexing; the double‑sided chipbreaker supports consistent chip control across indexes. What does the designation SNMG120408 indicate? The designation denotes a square ISO insert with a 12 mm inscribed circle and a 0.8 mm corner radius; the numbering corresponds to standard ISO geometry coding for turning plates. Is the insert compatible with standard ISO holders? Yes, compatibility depends on plate form, relief angle, tolerance class, fastening, size and thickness; the SNMG120408 is an ISO‑standard shape intended for widely used holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 T9215 Wendeplatten - Tungaloy
High wear resistance from the T9215 CVD coating combined with a 0.8 mm corner radius and a double-sided chipbreaker delivers stable, productive turning for medium steels; order the SNMG120408 via Metav Werkzeuge or consult our specialists for application-specific recommendations. SNMG 120408 T9215 SNMG — Turning insert (Tungaloy) SNMG120408 T9215 is an ISO-format, square indexable insert designed for external and internal turning applications, offering a robust CVD-coated carbide grade for continuous to slightly interrupted cuts. ISO SNMG120408 format, square geometry CVD-coated carbide grade T9215 0.8 mm corner radius for versatile machining Double-sided chipbreaker, with cylindrical hole Consistent productivity for medium-steel turning The CVD-coated carbide grade T9215 is engineered for high productivity in medium steel machining, combining elevated wear resistance with good fracture toughness. This balance enables longer tool life under continuous to slightly interrupted cutting conditions, reducing the frequency of index changes and machine downtime. Because the grade resists abrasive wear while maintaining edge stability, cycle times can be optimised without compromising surface quality or dimensional consistency. Reliable edge control and surface quality With a double-sided chipbreaker and a defined 0.8 mm corner radius, the insert supports predictable chip formation and stable cutting forces, which improves finishing passes and repeatability. The square form factor and 90° approach angle facilitate robust face and shoulder turning operations, while the cylindrical hole provides secure clamping and alignment in compatible holders. These design features translate into uniform surface finishes and fewer secondary operations. System compatibility and handling efficiency As an ISO-standardised insert, compatibility with holders is determined by shape, clearance angle, tolerance class, fastening method, size and thickness. The SNMG120408 format and 4.76 mm thickness work with a wide range of external holders and boring bars, simplifying tool inventory and changeover. Clear identification of the ISO designation 120408 and the manufacturer SKU supports procurement and reordering accuracy within production workflows. Practical selection guidance and application scope The T9215 grade is a dependable first choice for general-purpose turning of medium-strength steels where a blend of wear resistance and breakage control is required. For slightly interrupted cuts or applications with variable stability, the insert’s fracture-resistant properties help maintain production continuity. When selecting a chipbreaker or holder, match the insert’s geometry and clearance characteristics to the machining strategy and workpiece clamping to exploit the full benefit of the carbide grade and chip control features. Contact Metav Werkzeuge for machining data, compatibility checks or sample availability for the Tungaloy SNMG120408 T9215 insert: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6773914 Manufacturer SKU: TUN6773914 Stock SKU: 6773914-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts ISO designation: 120408 Corner radius: 0.8 mm Thickness: 4.76 mm Plate size: 12 mm Approach angle: 90° Clearance angle: 0° With hole: cylindrical Special features CVD-coated carbide grade T9215 Square plate form, double-sided chipbreaker Compatible with ISO holders for external and internal turning Suited to continuous to slightly interrupted cuts in medium steel FAQ What materials is this insert suited for? The SNMG120408 T9215 insert is specified for medium steel machining; the CVD-coated carbide grade T9215 combines wear resistance and toughness for productive turning of steels. How does the 0.8 mm corner radius affect machining? A 0.8 mm corner radius on the SNMG120408 provides a balance between strength and finish, reducing edge chipping while supporting good surface quality in shoulder and external turning. Is the insert reversible or single-use? The SNMG120408 is double-sided with a chipbreaker on each usable edge, allowing multiple indexes per insert to extend service life and lower tooling costs. Which holders are compatible with this ISO insert? Compatibility depends on holder form, free clearance, tolerance and fastening; the ISO SNMG120408 format is widely supported by standard external holders and boring bars designed for square inserts. What cutting conditions is grade T9215 recommended for? T9215 is intended for continuous to slightly interrupted cutting in medium steels where a combination of wear resistance and fracture control is needed for high productivity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 T9215 Wendeplatten - Tungaloy
Benefit from a combination of high wear resistance, breakage security and ISO compatibility to keep turning operations productive and predictable; order the SNMG120408 T9215 insert via Metav Werkzeuge or consult our technical advisors for application matching. SNMG120408 T9215 turning insert by Tungaloy — CVD-coated carbide, 0.8 mm radius The SNMG120408 T9215 is an ISO-standard turning insert designed for external and internal turning, offering a robust CVD-coated carbide grade for productive medium-steel machining. CVD-coated carbide T9215 for wear resistance Optimised for medium steel machining Double-sided chipbreaker for stable chips 0.8 mm corner radius, square 90° geometry Durable cutting performance for medium steels The CVD coating on this carbide grade combines high wear resistance with reliable fracture toughness, making it suitable for continuous to light interrupted cutting. That balance supports longer tool life and fewer indexings, which translates into better machine utilisation and lower process interruptions. For workshops requiring steady throughput, the combination of coating and substrate reduces unscheduled tool changes and helps maintain surface quality during systematic turning cycles. Precision geometry and ISO compatibility for predictable results Built to ISO standards, the insert’s 90° square geometry and 0.8 mm nose radius provide defined cutting engagement and consistent wall forms in turning operations. The plate thickness of 4.76 mm and the square 12 mm size are matched to standard holders; compatibility depends on form, clearance angle, tolerance class, fastening and thickness. A 0° clearance angle and the cylindrical centre hole ensure repeatable seating and secure clamping in compatible toolholders, simplifying changeovers and supporting accurate part tolerances. Stable chip control and efficient machining process The double-sided chipbreaker is engineered for controlled chip formation in medium steels, aiding evacuaton and reducing cutting forces in many turning scenarios. The insert’s design supports a cost-efficient indexable system: insert, suitable outer holder or boring bar, shim and clamp set with replacement screws. This modular approach enables quick restoration of cutting edges and predictable tool life, improving overall process reliability. If uncertain about matching grade or chipbreaker to a specific component, technical consultation is available to ensure the right setup. For medium-steel turning applications that demand high wear resistance and consistent performance, choose the Tungaloy SNMG120408 T9215 insert and contact Metav Werkzeuge for personalised selection and availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6944734-Tungaloy Manufacturer SKU: TUN6944734 Manufacturer article number: 6944734 Model series: ISO turning inserts Material: carbide Facts Corner radius: 0.8 mm Geometry angle: 90° Clearance angle: 0° Plate size: 12 mm Plate thickness: 4.76 mm Hole: with cylindrical hole Chipbreaker: double-sided Plate shape: square Design & Special features Coating: CVD (grade T9215) Intended application: turning (external and internal) Best for: medium steel machining Cutting conditions: continuous to light interrupted cuts System components: indexable insert, holder/boring bar, shim, clamp set, replacement screws FAQ What materials is this insert best suited for? This insert, the Tungaloy SNMG120408 T9215, is optimised for medium steels and delivers a balance of wear resistance and fracture security for productive turning. Is the insert reversible or single-sided? The SNMG120408 insert features a double-sided chipbreaker and can be indexed to reuse the second cutting face, improving cost efficiency per insert. How does the 0.8 mm radius affect finished parts? A 0.8 mm nose radius helps achieve defined corner forms and stable tool engagement; it supports good surface finish while maintaining edge strength in general turning tasks. Does the insert fit standard ISO holders? The SNMG120408 conforms to ISO dimensions; compatibility with a holder is determined by geometry, tolerance class, fastening method, size and thickness—select a matching holder accordingly. What advantages does the T9215 grade provide? The T9215 CVD-coated carbide offers enhanced wear resistance together with breakage resistance, making it a solid choice for sustained productivity in medium-steel turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 T9215 Wendeplatten - Tungaloy
Combining the T9215 CVD-coated carbide grade with the ISO SNMG120408 geometry and a 0° relief provides a durable solution for medium steel turning, offering high wear resistance and reliable edge security in continuous to light interrupted cuts. Order the SNMG120408 T9215 Tungaloy insert directly via Metav Werkzeuge or consult the specialists for selection support. SNMG120408 T9215 Turning insert by Tungaloy — CVD-coated carbide, 0° relief A SNMG120408 T9215 ISO turning insert engineered for medium steel machining, delivering dependable wear resistance and stable chip control in external and internal turning applications CVD-coated carbide grade T9215 ISO SNMG120408 geometry, square 12 mm 0.8 mm corner radius for general turning Double-sided chipbreaker, cylindrical hole Higher productivity through a wear-resistant grade The T9215 grade is a CVD-coated carbide designed as a first choice for medium steel machining, combining elevated wear resistance with good fracture toughness. This balance enables stable metal removal rates and increased productivity in both continuous and lightly interrupted cuts. The CVD coating protects the cutting edge against abrasive wear and helps maintain dimensional accuracy over longer tool life, which reduces downtime for insert changes and supports predictable cycle planning for production runs. Predictable clamping and simple integration with ISO geometry The ISO SNMG120408 form ensures straightforward compatibility with standard external holders and boring bars when the form, relief angle, tolerance class, fastening method, size and thickness match. The square 12 mm format with a 0.8 mm corner radius and 0° relief gives a clear reference for seat and clamping requirements, supporting repeatable positioning and robust clamping stability. Where holders or toolposts are already specified to ISO conventions, retrofitting this insert is a practical way to maintain process consistency. Improved chip control and process reliability Equipped with a double-sided chipbreaker, the insert supports reliable chip control across typical feed and speed ranges for steel. The chipformer geometry, combined with the CVD-coated surface, reduces the risk of built-up edge and promotes a consistent surface finish, which translates into fewer rework operations. Selecting the correct chipbreaker and grade for the workpiece material and cutting conditions helps conserve machine uptime and enhances overall process reliability. Suitable machining applications and system composition The insert is intended for both external and internal turning tasks, especially where continuous to light interrupted cuts are encountered. A complete cutting system comprises the ISO insert, a matching external holder or boring bar, an underlay/clamping set and replacement screws as required for secure mounting. For optimal results, choose the chipbreaker and grade according to the workpiece material, machining strategy and required surface finish; this targeted selection reduces wear-related variability and supports reproducible results. For reliable medium steel turning with proven edge security, select the Tungaloy T9215 grade — order the SNMG120408 T9215 through Metav Werkzeuge or request personalised advice from Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 6772285 Manufacturer SKU: TUN6772285 SKU: 6772285-Tungaloy Manufacturer article number: 6772285 Model series: ISO-Drehwendeschneidplatten Material: carbide Numbers / Core technical data Size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 0° Included angle: 90° Designs / Special features Geometry: SNMG120408 (square) Hole: with hole, cylindrical hole Chipbreaker: double-sided Coating / grade: T9215 (CVD-coated carbide) Application: turning System components: insert, matching holder or boring bar, underlay/clamping set and replacement screws FAQ What materials is this insert suited for? The SNMG120408 T9215 insert is specified primarily for medium steel machining; the T9215 CVD-coated carbide grade combines wear resistance with edge security suited to continuous and light interrupted cuts. Which toolholders are compatible with this geometry? Compatibility depends on holder form, relief angle, tolerance class, fastening method, size and thickness; the SNMG120408 form fits holders and boring bars designed for ISO SNMG inserts when those parameters match. How does the T9215 coating benefit machining performance? The CVD-coated carbide finish on the T9215 grade improves wear resistance and protects the cutting edge, extending useful tool life and helping to maintain surface quality under standard turning conditions. Is the insert suitable for internal turning as well as external turning? Yes; the insert is intended for both external and internal turning operations, provided the correct holder geometry and cutting parameters are applied. What should be considered for chip control? Select the appropriate chipbreaker and adjust feeds and speeds to match the workpiece and cutting conditions; the double-sided chipbreaker on this insert enhances chip control for common steel turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, reliable chip control and ISO compatibility for uninterrupted production in medium steel turning. Order the insert directly via Metav Werkzeuge or consult the team for application-specific recommendations. SNMG120408 T9215 Tungaloy — ISO SNMG turning indexable insert for medium steel, CVD-coated carbide A SNMG120408 T9215 Tungaloy indexable insert engineered for turning applications, featuring a square form, cylindrical hole and a double-sided chipbreaker for stable, repeatable cuts. CVD-coated carbide grade T9215 ISO SNMG120408 square insert 12 mm Double-sided chipbreaker for steady cuts Reliable productivity for medium steel turning The combination of T9215 micrograin carbide and a CVD-coated carbide layer delivers a balance of wear resistance and fracture toughness that suits continuous to slightly interrupted turning of medium steel. The chosen grade supports higher cutting parameters while maintaining edge integrity, which translates into longer metal removal periods between indexings and fewer unplanned stoppages. This focus on productive cutting cycles helps machining operations achieve consistent throughput without sacrificing component quality. Precision geometry for consistent surface finish and tool life A square plate with a 12 mm size and a 0.8 mm radius offers a robust contact geometry that reduces edge chipping and supports predictable tool deflection. The 0° relief angle combined with a plate thickness of 4.76 mm provides a secure seating in standard holders and contributes to a uniform surface finish on turned components. These geometric choices make the insert suitable for finishing and medium-machining steps where repeatability and surface integrity are required. ISO compatibility and secure clamping to reduce changeover time Designed to the ISO turning insert standard, compatibility with external holders is defined by form, relief angle, tolerance class, fastening and thickness. The insert’s cylindrical hole and square format permit easy indexing and reliable fixation, while the double-sided chipbreaker reduces vibration and stabilises chip formation. Together, these features shorten set-up and changeover times in production environments that rely on fast, repeatable tool changes within ISO-compliant tool systems. Operational benefits and recommended applications The technical design and coating make this insert particularly effective for job shops and production lines focusing on steel components where a balance of economy and tool life is essential. By pairing the insert with an appropriate holder and selecting a matching chipbreaker and grade for the workpiece stability, operators gain consistent component quality and predictable tool life. The combination of geometry, coating and grade supports higher productivity and cleaner chips, improving machine uptime and downstream handling. Contact Metav Werkzeuge for tailored application advice on the Tungaloy SNMG120408 T9215 insert and assistance with holder selection — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6796044 Manufacturer SKU: TUN6796044 SKU: 6796044-Tungaloy Model series: ISO turning indexable inserts Material: Carbide Facts Insert designation: SNMG120408 Size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 0° Angle: 90° Hole: with cylindrical hole Special features Grade: T9215 Coating: CVD-coated Chipbreaker: double-sided Shape: square Application: Turning Compatibility: ISO system; compatibility by form, relief, tolerance, fastening, size and thickness FAQ What materials is this insert designed for? The insert is specified for medium steel machining; the T9215 grade and CVD-coated carbide optimise wear resistance and toughness for turning operations in that material class. Can the insert be indexed and reused on both sides? Yes, the SNMG120408 design is double-sided with a cylindrical hole, allowing secure clamping and indexing for economical reuse of both cutting edges. How does the chipbreaker affect machining? The double-sided chipbreaker promotes controlled chip formation and improved evacuation, which helps to maintain stable cutting forces and consistently clean chips during turning. Is this insert compatible with standard ISO SNMG holders? Compatibility follows ISO conventions: form, relief angle, tolerance class, fastening, size and thickness determine fit; the SNMG120408 is intended for ISO SNMG holders when matched correctly. What makes the T9215 grade suitable for production work? T9215 combines high wear resistance with good fracture toughness, providing long tool life and reliable performance in continuous to lightly interrupted cuts, which supports higher productivity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of proven CVD-coated carbide performance and ISO compatibility for steady, high-productivity turning. The robust geometry and double-sided chipbreaker reduce downtime and improve process stability — order the insert directly via Metav Werkzeuge or consult the technical team for application advice. SNMG 120408 T9215 – ISO turning indexable insert, CVD-coated carbide | Tungaloy The SNMG 120408 T9215 is an ISO-format turning insert engineered for external and internal turning, offering a balance of wear resistance and fracture toughness for medium Stahl machining. SNMG 120408 geometry, 90° cutting angle CVD-coated carbide grade T9215 for medium Stahl Double-sided chipbreaker for reliable chips ISO standard insert with cylindrical hole Higher productivity through wear-resistant grade and consistent cutting The CVD-coated carbide T9215 combines wear resistance with breakage safety to support longer tool life in continuous to slightly interrupted cuts. As a CVD coating is a thin, chemically deposited ceramic layer, it protects the substrate from abrasive and adhesive wear while maintaining edge toughness; this means less frequent insert changes and more uninterrupted machining time. The result is a tangible increase in throughput for batch and series turning where repeatable performance and predictable tool consumption are essential. The insert’s design targets profitable machining cycles on medium Stahl, translating material properties into operational gains. Predictable chip control and stable machining for better surface quality The insert’s double-sided chipbreaker and 90° geometry promote controlled chip formation and evacuation, reducing the risk of entanglement and tool damage. The corner radius 0.8 mm provides a compromise between edge strength and fine finishing capability, supporting dimensional stability at moderate feeds. The 0° relief angle and square plate format contribute to a sturdy cutting edge that resists vibration, which helps maintain consistent surface finish and tolerances across production runs. Explaining briefly: a chipbreaker shapes the chip so the machine can remove it efficiently, improving process reliability during steel turning operations. Fast integration into ISO tool systems for flexible workshop use Built to ISO conventions and featuring a cylindrical hole and standard dimensions (12 mm size, 4.76 mm thickness), the insert integrates easily with existing holders, allowing quick changeovers and minimal setup effort. Compatibility depends on the holder’s form, relief angle, tolerance class, fastening method and pocket geometry; matching these parameters ensures correct clamping and optimal cutting conditions. The insert is intended for use with a matching clamping set, seat/washer and replacement screws as required by the system. For users who assess tooling logistics, adopting ISO-format plates simplifies inventory and keeps tooling costs manageable while sustaining machining quality. For high-productivity turning with Tungaloy’s T9215 grade, contact Metav Werkzeuge for selection support and availability: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6773954 Manufacturer SKU: TUN6773954 Model series: ISO turning indexable inserts Facts Size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 0° Cutting angle: 90° Plate shape: square Special features Material: carbide (Hartmetall) Coating: CVD, grade T9215 Double-sided chipbreaker With cylindrical hole Application: external and internal turning FAQ What materials is this insert suited for? The SNMG 120408 T9215 is specified for medium Stahl machining; the CVD-coated Hartmetall grade offers wear resistance suitable for general Stahl applications. Is the insert single- or double-sided? The insert is double-sided and can be indexed to present a fresh cutting edge, which extends tool life and reduces tooling costs. How does the chipbreaker affect machining? The double-sided chipbreaker on this insert enhances chip control and evacuation, improving process stability and surface quality during turning operations. Can this ISO insert be used with existing holders? Compatibility is achieved when holder form, relief angle, tolerance class, fastening and pocket dimensions match the insert’s ISO geometry and 4.76 mm thickness. What is the benefit of the 0.8 mm corner radius? A corner radius of 0.8 mm increases edge strength for stable cuts while still enabling acceptable surface finish at typical feed rates for medium Stahl. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 T9215 Wendeplatten - Tungaloy
Take advantage of the T9215 CVD-coated carbide for high wear resistance and the SNMG120408 geometry for stable, reproducible turning results; order directly via Metav Werkzeuge or consult our specialists for tool matching and insertion guidance. SNMG 120408 T9215 SNMG indexable insert for turning by Tungaloy SNMG 120408 T9215 is an ISO-format indexable insert engineered for external and internal turning, offering a CVD-coated carbide grade tailored to productive medium-steel machining. ISO SNMG 120408 geometry, square form CVD-coated carbide grade T9215 Double-sided chipbreaker with cylindrical hole 0.8 mm corner radius for fine finishing Productive performance for medium-steel turning The combination of CVD-coated carbide and the T9215 grade delivers a high level of wear resistance together with reliable fracture toughness, making it well suited to continuous and lightly interrupted cuts in medium steel. This balance of properties supports increased productivity by extending tool life and maintaining cutting-edge stability, which reduces the frequency of index changes. The insert’s intended use in turning operations means the grade and chipbreaker can be matched to the workpiece and machining stability to optimise cycle times and surface quality. Geometry and mounting for repeatable accuracy Built to the ISO SNMG120408 specification, the square insert with a 0.8 mm corner radius and 0° rake angle provides a predictable cutting profile and consistent chip formation. The insert is double-sided, offering two usable cutting edges per side, and is supplied with a cylindrical hole to ensure secure and repeatable clamping in compatible holders. These geometric features help deliver uniform surface finishes and reduce variability between tool changes, which is particularly important in batch production and long turning cycles. System compatibility and reduced downtime The insert forms part of a machining system comprising the ISO insert, a matching external holder or boring bar, clamp pad and screws. Compatibility depends on form, clearance angle, tolerance class, attachment method, size and thickness; matching these parameters ensures correct seating and safe cutting performance. The double-sided chipbreaker design contributes to stable chip control across a range of cutting parameters, helping to avoid chip-related interruptions and lowering the risk of rework. Overall, component interchangeability and proven clamping reduce machine downtime and support a streamlined workflow. Practical selection and machining notes For routine applications in medium steel, the T9215 grade is a preferred choice where a balance of wear resistance and toughness is required; it is engineered for productive machining with a broad material coverage. Select the chipbreaker and insert geometry according to the part rigidity and the intended cutting mode (finishing or medium roughing). When fitting the insert, verify the holder’s seating for the SNMG profile and torque the clamp screw to the manufacturer’s recommendation to secure repeatable performance and to avoid edge chipping. For tailored selection help or to order Tungaloy SNMG 120408 T9215 inserts, contact Metav Werkzeuge for expert advice and fast delivery—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6773925 Facts ISO designation: SNMG120408 Corner radius: 0.8 mm Insert size: 12 mm Thickness: 4.76 mm Rake angle: 0° Included hole: with cylindrical hole Special features Material: carbide Coating: CVD-coated Grade: T9215 Chipbreaker: double-sided Shape: square Application: turning (external and internal) System: ISO indexable insert compatible with matching holders and clamps Typical use: medium steel machining FAQ What materials is this insert intended for? This SNMG 120408 T9215 insert from Tungaloy is designed primarily for medium steel machining and offers a balance of wear resistance and toughness for productive turning operations. Can the SNMG120408 be used for interrupted cuts? The T9215 grade provides good fracture resistance and is suitable for continuous to lightly interrupted cuts; heavier interruptions may require a different grade or reinforced process parameters. How is the insert secured in the holder? The insert features a cylindrical hole and is clamped in ISO-compatible holders; correct seating, clamp pad and screw torque are essential for repeatable performance. Does the insert offer more than one cutting edge? Yes, the square SNMG geometry is double-sided, providing multiple usable cutting edges to extend tool life before disposal or reconditioning. Which features improve surface finish with this insert? The 0.8 mm corner radius and the SNMG geometry contribute to a stable cutting profile and controlled chip formation, helping to achieve improved surface finishes during turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 T9215 Wendeplatten - Tungaloy
Take advantage of the T9215 CVD-coated carbide for reliable wear resistance and fracture safety together with the ISO compatibility of the SNMG form for fast tool changes and consistent cycle times. Order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. SNMG120408 T9215 indexable insert for turning by Tungaloy — CVD-coated carbide, 0.8 mm radius The SNMG120408 T9215 is an ISO-standard quadrilateral indexable insert designed for external and internal turning, offering a balance of high wear resistance and robustness for medium-steel machining. CVD-coated carbide grade T9215 Optimised for medium steel machining Double-sided chipbreaker for versatility ISO-standard SNMG120408 geometry Consistent productivity through a wear-resistant grade The CVD-coated T9215 grade combines a wear-focused coating with a tough substrate to deliver sustained wear resistance and fracture resistance during continuous or lightly interrupted cuts. This means longer intervals between indexings and predictable tool life, which in turn supports higher gross material removal rates and lower machining costs per component. Explaining the technical benefit: a CVD coating deposits hard ceramic layers that protect the substrate at the cutting edge, while the carbide core maintains edge strength under load — a combination that increases productivity without compromising process stability. Fast set-ups and interchangeability with ISO geometry Designed to the ISO SNMG120408 form, the insert guarantees dimensional interchangeability with compatible external holders and boring bars; compatibility is determined by the insert form, clearance angle, tolerance class, clamping method, size and thickness. The quadrilateral outline and central mounting enable straightforward indexing and secure clamping, reducing downtime during tool changes. The ISO-standard design also simplifies inventory management: one geometry supports multiple applications when paired with the correct holder and chipbreaker. Practical guidance for application and surface quality With a 0.8 mm corner radius the insert offers a compromise between edge strength and surface finish: larger radii increase edge robustness and are preferable for heavier cuts, while the given radius still permits good surface finish in finishing passes. The double-sided chipbreaker provides two cutting edges per side, extending usable life and offering versatility across roughing and semi-finishing. Typical use is turning of medium steels; select the chipbreaker and cutting data to match workpiece stability and the intended surface requirement. Note the insert is supplied with cylindrical hole for standard clamping systems. For machining operations requiring a robust, high-wear-capable solution, request the Tungaloy SNMG120408 T9215 from Metav Werkzeuge or contact our technical team at info@metav-werkzeuge.com or +49 2822 7131930 for tailored cutting data and holder recommendations Technical data Article number: 6774084 Manufacturer SKU: TUN6774084 Our SKU: 6774084-Tungaloy Model series: ISO turning indexable inserts Material: cemented carbide Coating / grade: T9215 (CVD-coated) Core data Corner radius: 0.8 mm Insert size: 12 mm Thickness: 4.76 mm Included angle: 90° Insert designation: SNMG120408 Design / Special features Quadrilateral insert form Double-sided chipbreaker With cylindrical hole 0° clearance angle Optimised for medium steel turning Suitable for external and internal turning FAQ Which holders are compatible with this insert? Compatibility is determined by the SNMG120408 form; the SNMG120408 T9215 insert fits holders and boring bars designed for SNMG inserts with the corresponding size, thickness and clamping style. Is this insert suitable for heavy interrupted cuts? The T9215 grade is designed for medium-steel machining and offers good fracture resistance; it is best for continuous to lightly interrupted cuts rather than heavy interrupted interruptions. How does the CVD coating affect performance? The CVD coating on the SNMG120408 T9215 provides a hard protective layer that improves wear resistance and helps maintain edge geometry over longer operating periods. How many usable edges does the insert offer? The double-sided design of the SNMG120408 insert provides multiple cutting edges; consult the holder and mounting practice to ensure correct indexing and full use of available edges. What finish can be expected on medium steel? When used with appropriate cutting parameters and a suitable chipbreaker, the SNMG120408 T9215 delivers consistent surface quality compatible with semi-finish and finish turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide T9215 for high wear resistance, the double-sided chipbreaker for extended tool life, and ISO conformity for reliable clamping — all designed to maintain a productive turning process; order directly via Metav Werkzeuge or request application guidance from our consultants. SNMG 120408 T9215 Turning indexable insert — Tungaloy A SNMG120408 T9215 indexable turning insert for medium-steel machining, combining a CVD-coated carbide grade with a double-sided chipbreaker for productive continuous to lightly interrupted cuts. ISO‑normed SNMG shape CVD-coated carbide grade T9215 Double-sided chipbreaker 0.8 mm corner radius, 90° nose angle Higher output from a grade tuned to medium steel The combination of CVD-coated surface and a carbide substrate in grade T9215 offers a balance of wear resistance and fracture toughness that is well suited to medium-steel applications. This makes the insert particularly effective for longer production runs where consistent performance matters. The coating improves resistance to abrasive wear and maintains cutting-edge integrity, while the substrate absorbs impact in slightly interrupted cuts. As a result, manufacturers can expect improved process stability and longer effective tool life compared with uncoated grades. ISO conformity and secure clamping for consistent accuracy Built to the ISO SNMG120408 format, the insert’s geometry and dimensions simplify selection of a compatible holder: the match depends on shape, relief angle, tolerance class, clamping method, size and thickness. The square plate with a cylindrical hole permits positive seating and stable fastening in standard SNMG toolholders, and the double-sided nature enables turning over to a fresh edge, reducing changeover frequency. The defined 0.8 mm corner radius and 90° nose angle provide predictable engagement with the workpiece, supporting dimensional control and repeatable surface results. Practical application advice for turning operations This insert is optimised for external and internal turning where a medium-steel grade is in use; select the matching chipbreaker and cutting parameters depending on the operation and machine rigidity. The double-sided chipbreaker helps control swarf and chip formation in typical turning tasks, improving surface finish and reducing downtime caused by unstable chips. For applications that involve light interruptions, the grade’s balanced toughness reduces the risk of edge chipping, while in continuous cuts it sustains steady wear behaviour — both contributing to more consistent productivity on the shop floor. How to choose and integrate this insert for best results When integrating this indexable insert into a tooling system, consider the holder design and the intended cutting conditions: choose a holder that matches the SNMG form and permits secure clamping of the plate through the central cylindrical hole. Combine the T9215 grade with an appropriate chipbreaker selection for the workpiece and machining strategy; this reduces the need for frequent regrinding or replacements. For shops prioritising uptime and reproducible results, the combination of coated carbide and a robust chip control design helps achieve both process reliability and efficient material removal. For application-specific recommendations and availability of the Tungaloy SNMG120408 T9215 insert, contact Metav Werkzeuge for tailored advice and rapid delivery — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6773951 Manufacturer SKU: TUN6773951 Model designation: SNMG120408 T9215 Manufacturer: Tungaloy Dimensions & numbers Insert size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Nose angle: 90° Relief angle: 0° Manufacturer article number: 6773951 Features & materials CVD-coated carbide grade T9215 Double-sided chipbreaker Square plate with cylindrical hole ISO SNMG120408 format Suitable for external and internal turning FAQ What materials is this insert intended for? The SNMG120408 T9215 insert is designed primarily for medium-steel machining; the T9215 grade combines wear resistance and toughness for productive turning operations. Is the insert reversible or single-use per side? This is a double-sided, indexable insert; both sides can be used, allowing the plate to be rotated to present a fresh cutting edge. Which holder type is required for this insert? An SNMG-compatible turning holder that accepts the SNMG120408 geometry and secures the plate via its cylindrical hole is required for proper clamping and repeatable positioning. Can this insert handle light interrupted cuts? Yes, the carbide substrate and the T9215 grade provide increased resistance to chipping in light interruptions while remaining effective in continuous cuts. Does the geometry support fine surface finishes? The combination of the 0.8 mm corner radius and the controlled chipbreaker promotes stable cutting and reproducible surface results when used with appropriate feeds and speeds. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 T9215 Wendeplatten - Tungaloy
Take advantage of the CVD-coated T9215 carbide for high wear resistance and excellent fracture safety, combined with the SNMG 120408 geometry for straightforward ISO-holder compatibility. Order the insert directly via Metav Werkzeuge or consult the team for application advice. SNMG120408 T9215 turning insert SNMG 120408 by Tungaloy — CVD-coated carbide, 0° clearance SNMG120408 T9215 is a CVD-coated carbide indexable insert designed for medium steel turning in ISO tool systems, offering reliable wear resistance and high productivity. CVD-coated carbide T9215 grade Double-sided chipbreaker 0° clearance for stable turning Square 12 mm plate, 4.76 mm thick Achieve higher productivity in medium-steel turning The combination of a CVD-coated surface and the T9215 grade carbide delivers a tangible increase in tool life under continuous and mildly interrupted cuts. This indexable insert provides consistent cutting-edge performance, reducing changeover frequency and enhancing process stability. The T9215 coating balances wear resistance and fracture toughness, which is especially beneficial when targeting higher material removal rates in medium steels. As a result, machining cycles are more predictable and overall throughput improves while maintaining surface quality. Easy integration with ISO toolholders and secure clamping Designed as an ISO-standard SNMG insert, the plate fits a wide range of holders when matched by shape, clearance angle, tolerance class, attachment method, size and thickness. The 0° clearance angle and square plate form ensure predictable engagement with the workpiece and aid repeatable set-up. Compatibility is ensured by verifying the holder’s seat dimensions and screw or clamp arrangement; when matched correctly, the insert delivers stable cutting conditions and reduced vibration, which supports longer tool and holder life. Reliable chip control and consistent edge performance The insert features a double-sided chipbreaker and a cylindrical hole for secure fastening, promoting controlled chip formation and evacuation during turning operations. The 0.8 mm corner radius and 4.76 mm thickness provide robust edge support, minimising the risk of edge chipping under load and improving dimensional stability. These design elements combine to offer a cost-effective solution for repetitive turning tasks, where consistent surface finish and extended insert life translate into lower total machining costs. For fast supply and application guidance on Tungaloy inserts with T9215, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and delivery options Technical data Article number: 6944756-Tungaloy Manufacturer article number: 6944756 Manufacturer SKU: TUN6944756 Manufacturer: Tungaloy Facts Plate designation: SNMG120408 Grade: T9215 (CVD-coated) Plate size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Included angle: 90° Special features Material: carbide Plate form: square Hole: with cylindrical hole Chipbreaker: double-sided Application: turning Series: ISO turning indexable inserts Compatibility determined by shape, clearance angle, tolerance class, attachment, size and thickness FAQ What materials is this insert best suited for? The SNMG120408 T9215 turning insert by Tungaloy is optimised for medium steels; the T9215 grade combines wear resistance with fracture safety for productive steel turning. Can this insert be used in interrupted cuts? Yes. The T9215-coated carbide and robust 0.8 mm corner radius allow the insert to perform well under continuous and mildly interrupted cutting conditions. How does the double-sided chipbreaker help in production? The double-sided chipbreaker on the SNMG120408 promotes predictable chip formation and evacuation, improving surface finish and reducing the likelihood of recutting chips. Which holder features must be checked before installation? Ensure matching by seat form, clearance angle, tolerance class, fastening method, plate size and thickness; correct matching secures the insert and maintains stable cutting performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 T9215 Wendeplatten - Tungaloy
High wear resistance from the CVD‑coated carbide T9215, combined with a stable 0.8 mm corner radius and a square ISO form, supports productive medium‑steel turning with reliable edge life. Order the SNMG120408 T9215 indexable insert directly via Metav Werkzeuge or ask our consultants if needed. SNMG 120408 T9215 turning indexable insert (ISO) – CVD‑coated carbide, 0.8 mm radius (Tungaloy) The SNMG120408 T9215 is an ISO‑standard square indexable insert for external and internal turning, optimised for productive machining of medium steel in continuous to light interrupted cuts. CVD‑coated carbide for high wear resistance Double‑sided chipbreaker for reliable chips ISO SNMG120408 square format, with hole 0.8 mm corner radius for stable edge life Engineered for productive medium‑steel turning The T9215 grade combines a CVD‑coated surface with a tough carbide substrate to deliver a balance of wear resistance and fracture toughness. This makes the insert particularly suitable for sustained production work on medium‑strength steels where consistent tool life and predictable performance are priorities. The design aims to reduce unplanned downtime by offering stable cutting edges that tolerate continuous or slightly interrupted cuts, so machining cycles remain efficient and repeatable. Benefits are expressed in longer intervals between indexings and fewer tool changes, improving overall process throughput. Compatibility and system guidance for secure clamping The insert is an ISO‑design SNMG geometry; compatibility with a toolholder depends on several mechanical factors: the insert form, the relief angle, tolerance class, method of fastening, overall size and thickness. Check the holder specification against the SNMG120408 dimensions and the 0° relief/clearance angle to ensure correct seating and clamping. Matching the insert to the correct outside holder or boring bar, plus the appropriate shim and clamp set, secures repeatable location and consistent cutting conditions, which in turn stabilises surface finish and dimensional accuracy. Geometry, chip control and edge stability Square plate geometry with a 0.8 mm corner radius provides a compromise between a robust cutting edge and acceptable corner wear progression. The double‑sided chipbreaker assists in forming short, controllable chips across a range of feeds, reducing the risk of long swarf and improving cycle safety. A cylindrical centre hole ensures firm axial and radial clamping in compatible holders. With a plate thickness of 4.76 mm and a 12 mm nominal size, the insert offers mechanical stiffness that supports higher metal removal rates while maintaining dimensional stability at the cutting edge. Coating, substrate and recommended applications The CVD‑coating provides a hard, wear‑resistant surface that resists abrasive wear and preserves the integrity of the cutting edge under elevated temperatures. The underlying carbide substrate contributes fracture resistance, a necessary attribute when working with continuous cuts or slight interruptions. This combination is why the grade is recommended as a first choice for medium steel turning tasks. For best results, pair the insert with cutting parameters and coolant strategy aligned to the workpiece material and machine rigidity; this will harness the grade’s productivity potential while maintaining surface quality. For application‑specific recommendations on Tungaloy turning inserts such as the SNMG120408 T9215, contact Metav Werkzeuge for a tailored selection or machining proposal via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6772297 Manufacturer SKU: TUN6772297 SKU: 6772297-Tungaloy Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Dimensions & geometry Corner radius: 0.8 mm Thickness: 4.76 mm Size: 12 mm Clearance/relief angle: 0° Included hole: cylindrical Special features CVD‑coated carbide Grade T9215 Double‑sided chipbreaker Square plate form (SNMG) Cylindrical centre hole for clamping For external and internal turning Compatibility depends on form, clearance angle, tolerance class, fastening, size and thickness FAQ What materials is this insert best suited for? The Tungaloy SNMG120408 T9215 insert is optimised for medium‑strength steel and is specified as a first choice where wear resistance and fracture toughness must be balanced. Can the SNMG120408 be used for interrupted cuts? Yes, the T9215 grade tolerates continuous to light interrupted cutting; however, heavier interruptions may require a different geometry or grade designed specifically for interrupted machining. How does the double‑sided chipbreaker affect performance? The double‑sided chipbreaker on this square insert promotes short, controllable chips and enhances machining stability, which supports safer, more efficient production cycles. What dimensions ensure holder compatibility for this insert? Compatibility requires a holder matching the SNMG format, the 12 mm size, 4.76 mm thickness and a 0° clearance angle, along with correct clamp and shim arrangements. Is the coating suitable for elevated cutting temperatures? The CVD‑coating on the T9215 grade provides high surface hardness and good thermal resistance, supporting performance at elevated cutting temperatures during steel turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNMG 120408 T9215 Wendeplatten - Tungaloy
Reliable, hard-wearing performance is achieved by the combination of CVD-coated carbide T9215 and the 0.8 mm corner radius in the ISO SNMG120408 format, delivering productive turning in medium steels; order the SNMG120408 T9215 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed SNMG 120408 T9215 ISO turning insert for medium-steel turning by Tungaloy A SNMG120408 T9215 ISO turning insert designed for efficient external and internal turning in medium steels and for productive continuous to slightly interrupted cuts CVD-coated carbide for high wear resistance ISO SNMG120408 square format, 12 mm size 0° relief angle and 90° approach angle Double-sided insert with cylindrical hole Durable cutting performance for medium-steel production The CVD-coated carbide T9215 grade combines high wear resistance with enhanced fracture toughness, which supports consistent tool life under continuous cutting. The coating reduces abrasive wear and preserves the cutting edge, while the substrate material maintains edge stability during interruptions; this delivers measurable gains in uptime and process reliability for series turning of medium steels. The specified 0.8 mm corner radius balances edge strength and surface finish, making the insert suitable for both heavier cuts and finish passes without frequent index changes. Clear compatibility and secure clamping for reliable mounting Compatibility with the toolholder is governed by form, relief angle, tolerance class, fastening, size and thickness — the SNMG geometry follows ISO standards to simplify holder selection. The cylindrical hole provides stable seating and positive clamp engagement in compatible external holders or boring bars, while the square 12 mm format and 4.76 mm thickness define the mechanical interface. The double-sided design allows indexing for a second cutting edge, reducing tooling cost per edge. Precise matching of holder and insert ensures repeatable chip load, stable chip formation and predictable cutting forces. Optimise process productivity and chip control Selecting an appropriate chipbreaker and cutting data suited to the grade and workpiece stabilises swarf behaviour and surface quality. For medium steel turning, the T9215 grade is engineered to perform well at elevated productivity levels and in slightly interrupted cuts, offering stable chip formation and dependable performance across shifts. The ISO SNMG120408 format integrates into standard turning systems — combine the insert with a matched external holder or boring bar, fitting shim/clamp sets and replacement screws as required — to create a productive, serviceable tooling system that supports consistent part quality. For technical consultation, grade selection or to request genuine Tungaloy SNMG120408 inserts, contact Metav Werkzeuge for application advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6772288 Manufacturer SKU: TUN6772288 SKU: 6772288-Tungaloy Designation: SNMG120408 T9215 Shape: square Facts Size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 0° Approach angle: 90° Hole: cylindrical hole Special features Material: carbide Coating: CVD Grade: T9215 Application: turning (external and internal) Chipbreaker: double-sided System components: insert, external holder or boring bar, shim/clamp set, replacement screws FAQ What workpiece materials is this insert suited for? The SNMG120408 T9215 Tungaloy insert is optimised for medium-steel machining and performs reliably in continuous to slightly interrupted turning operations. How does the 0.8 mm corner radius affect performance? A 0.8 mm radius increases edge strength and improves stability during heavier cuts, while still allowing acceptable surface finish for many finishing operations with the SNMG geometry. Is the insert indexable and cost-effective? Yes, the SNMG120408 is double-sided and indexable; the design permits use of multiple cutting edges, lowering cost per effective edge and extending time between insert changes. What does the cylindrical hole mean for clamping? The cylindrical hole provides positive mechanical location and secure clamping in compatible holders, reducing the risk of movement under cutting forces and improving repeatability. Can this insert be used for internal turning? Yes, the insert’s ISO SNMG120408 geometry and grade make it suitable for both external and internal turning when paired with the correct boring bar or internal holder Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 T9215 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide T9215 and the ISO SNMG geometry for reliable, high-productivity turning; the square 12 mm size with a 0.8 mm corner radius provides stable cutting performance and predictable tool life. Order the SNMG120408 T9215 insert directly via Metav Werkzeuge or consult Metav Werkzeuge specialists for holder compatibility and application advice. SNMG 120408 T9215 – Tungaloy indexable insert for turning, CVD-coated A SNMG120408 T9215 indexable insert designed for medium-steel turning, offering robust wear resistance and a double-sided chipbreaker for improved chip control ISO SNMG geometry, wide holder compatibility CVD-coated carbide grade T9215 for wear resistance 12 mm square insert with 0.8 mm corner radius Double-sided chipbreaker and cylindrical hole for clamping Durable cutting performance for continuous turning operations The CVD-coated carbide grade T9215 combines high wear resistance with fracture toughness, making it well suited to productive, continuous or lightly interrupted turning in medium steel. The coating reduces flank wear and maintains edge integrity over longer cycle times, which in turn reduces index changes and downtime. With the ISO-compliant geometry and CVD coating, the insert supports consistent chip formation and surface finish, enabling stable cycle times and predictable component tolerance achievement. Reliable clamping and universal fit for faster changeovers The square 12 mm format, cylindrical hole and standard SNMG shape ensure straightforward clamping in compatible holders; compatibility is governed by form, relief angle, tolerance class, fastening method, size and thickness. The flat 90° included angle and the 0° relief angle contribute to secure seating and repeatable positioning in the toolholder, while the double-sided chipbreaker supports effective chip control across both indexable faces. These design choices simplify inventory and reduce the variety of holders required for common turning tasks. Process efficiency and material-specific optimisation Chosen as a first option for medium-steel machining, the T9215 grade enables higher material removal rates without sacrificing edge life. Matching the chipbreaker and grade to the workpiece and machining stability yields fewer interruptions for tool changes and more predictable tool life. The combination of CVD-coated carbide and the insert geometry helps achieve efficient cutting parameters, delivering shorter cycle times and improved throughput in batch production or serial turning operations. Practical integration and short setup learning curve Integration into a workshop is straightforward: select a compatible SNMG holder or boring bar that accepts a 12 mm square insert with a cylindrical fixing, then set feed and speed according to material and stability. The insert’s balanced specification—0.8 mm corner radius and 4.76 mm thickness—offers a compromise between strength and profile accuracy for external and internal turning. Clear identification by ISO designation and manufacturer SKU reduces mix-ups at the tool crib and simplifies reordering for routine operations. Ask Metav Werkzeuge for application recommendations on the Tungaloy SNMG120408 T9215 insert to ensure optimal holder selection and machining parameters Technical data Article number: 6796086 SKU: 6796086-Tungaloy Manufacturer SKU: TUN6796086 Brand: Tungaloy Model series: ISO turning indexable inserts Product designation: SNMG120408 T9215 insert Material: carbide Coating: CVD-coated Numbers / core technical data Insert size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 90° Relief/free angle: 0° Manufacturer item number: 6796086 Design / special features Square insert shape Cylindrical hole for clamping Double-sided chipbreaker CVD-coated carbide grade T9215 Suitable for external and internal turning Compatibility depends on form, relief angle, tolerance, fastening, size and thickness FAQ Which materials is this insert intended for? The SNMG120408 T9215 insert is specified as a first choice for medium steel machining; the CVD-coated carbide provides wear resistance and toughness suited to continuous or slightly interrupted cuts. Can the insert be used for both external and internal turning? Yes, the insert’s design and square format make it suitable for external and internal turning operations when paired with an appropriate holder or boring bar. What advantages does the T9215 grade offer? T9215 is a CVD-coated carbide grade that balances high wear resistance with fracture toughness, increasing productivity while maintaining reliable edge life in medium-steel applications. How does the chipbreaker affect machining? The double-sided chipbreaker promotes consistent chip control across both usable faces, improving surface finish and reducing the risk of chip entanglement in a range of turning conditions. What clamping features must the holder provide? Holders must accept a 12 mm square SNMG insert with a cylindrical hole; secure clamping and correct geometry matching (form, relief angle and tolerance) ensure repeatable seating and performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 T9215 Wendeplatten - Tungaloy
Benefit from the combination of the T9215 CVD‑coated carbide grade and the ISO SNMG120408 geometry for high productivity and reliable wear resistance; the 0° clearance and double‑sided chipbreaker ensure stable cutting and controlled chips. Order directly via Metav Werkzeuge or request specialist consultation for process integration. SNMG120408 T9215 — Tungaloy CVD‑coated carbide turning insert, 0° clearance The SNMG120408 T9215 is an ISO‑standard square turning insert designed for external and internal turning, optimised for medium‑steel machining with continuous to lightly interrupted cuts. CVD‑coated carbide grade T9215 ISO SNMG 120408 geometry 0° clearance angle for stable cutting Double‑sided chipbreaker for chip control Cylindrical hole, 4.76 mm plate thickness Consistent productivity with a wear‑resistant cutting grade The T9215 grade is a CVD‑coated carbide developed for efficient medium‑steel machining. Its formulation balances wear resistance with fracture toughness, so higher material removal rates can be maintained without premature edge failure. In practice, this means longer tool life under steady production and reduced tool change frequency. The coating improves thermal stability at the cutting edge, which supports higher cutting speeds where machine and process rigidity allow. For manufacturing environments seeking repeatable throughput, this insert offers a predictable compromise between aggressiveness and durability. ISO compatibility and secure clamping reduce setup risk The SNMG geometry is ISO‑standardised, so compatibility with external holders and boring bars is determined by form, clearance angle, tolerance class, fastening type, size and thickness. The 0° clearance angle specified here promotes a robust edge contact, useful in less rigid setups or when facing interrupted cuts. Where fixture and holder dimensions follow the ISO guidelines, the insert seats reliably and the risk of incorrect assembly is reduced. Clear identification of geometry and dimensions helps standardise tooling across machines and operators, simplifying inventory and procurement. Improved chip control and surface reliability A double‑sided chipbreaker combined with a 0.8 mm corner radius delivers consistent chip formation and contributes to a stable surface finish. The chipbreaker is designed for a balance between small, controllable chips and low cutting forces, which helps prevent entanglement and improves operator safety. The square plate format with a cylindrical hole provides secure fastening and enables two usable edges per side, enhancing economy per insert. For fine surface requirements, the modest corner radius reduces scallop height while maintaining edge strength. Practical system considerations for workshop efficiency The insert is part of a system comprising an ISO turning plate, a matching external holder or boring bar, a support/locking kit and replacement screws. Plate thickness of 4.76 mm and plate size of 12 mm should be matched to holders rated for SNMG120408 to ensure correct seating and clamping torque. Select the chipbreaker and grade based on the workpiece material, machine rigidity and cutting mode: choose T9215 for medium steels and when a reliable balance of tool life and productivity is needed. Spare inserts and fastening hardware kept on the shelf reduce machine downtime and support uninterrupted production runs. Contact Metav Werkzeuge for expert selection of Tungaloy SNMG120408 inserts and matched holders to ensure optimal process integration and fast availability Technical Data Article number: 6773915 Manufacturer article number: 6773915 SKU: 6773915-Tungaloy Manufacturer SKU: TUN6773915 Core specifications Geometry: SNMG 120408 Plate size: 12 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Special features Material: carbide Grade: T9215 (CVD‑coated carbide) Plate form: square Hole: cylindrical Chipbreaker: double‑sided Application: turning (external and internal) Model series: ISO turning cutting inserts Included angle: 90° FAQ What machining tasks is this insert best suited for? This SNMG120408 insert in grade T9215 is optimised for medium‑steel turning tasks, offering a balance of wear resistance and toughness for continuous to light‑interrupted cuts. How does the T9215 grade affect process parameters? The T9215 CVD‑coated carbide allows higher cutting speeds and improved thermal stability compared with uncoated grades, enabling productive machining while maintaining edge life. Is the insert compatible with standard SNMG holders? Yes — the SNMG120408 designation conforms to ISO geometry, so compatibility depends on matching form, thickness (4.76 mm), fastening and tolerance class with the holder. What benefits does the double‑sided chipbreaker provide? The double‑sided chipbreaker supports controlled chip formation and reduced cutting forces, improving surface quality and reducing the likelihood of chip entanglement. Which corner radius should be chosen for fine surface finish? For improved surface finish with adequate edge strength, the 0.8 mm corner radius supplied with this insert is a practical compromise between surface conformity and durability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, reliable chip control, and ISO compatibility for efficient medium-steel turning; order directly via Metav Werkzeuge or contact our consultants for selection and availability. SNMG 120408 T9215 — SNMG120408 Tungaloy turning insert (ISO SNMG, square, 0° clearance) SNMG120408 T9215 is a CVD-coated carbide indexable insert designed for medium steel turning, featuring a double-sided chipbreaker and a 0° clearance angle. CVD-coated carbide T9215 grade ISO SNMG square form, with hole 0.8 mm corner radius for versatile finishing Double-sided chipbreaker for consistent chips Delivering higher productivity in medium-steel turning The combination of CVD-coated carbide and the T9215 grade provides a balance of wear resistance and fracture toughness that supports sustained production runs. This insert is engineered for medium steel machining and performs well in continuous to light interrupted cuts, translating into fewer indexings and reduced tool-change downtime. The robust coating reduces flank wear and helps maintain surface finish over longer tool life, which improves process stability and lowers unit cost per part. Fast, secure fit and straightforward ISO compatibility Compatibility follows ISO SNMG standards, so the insert matches holders when form, clearance angle, tolerance class, fixing method, size and thickness are aligned. The square form with a cylindrical hole and a plate thickness of 4.76 mm ensures reliable clamping and repeatable seating in standard indexable holders. The 90° included angle provides predictable cutting geometry, simplifying the selection of compatible toolholders and reducing setup time on the shop floor. Consistent chip control and extended edge life A double-sided chipbreaker on this indexable insert delivers steady chip formation across a range of feeds and depths of cut, improving evacuation and minimising recutting. The 0.8 mm corner radius balances strength and finish capability, supporting light finishing passes without sacrificing robustness. Together, the chipbreaker geometry and the CVD-coated substrate enhance edge stability, which is particularly valuable when machining medium steel where both abrasion and mechanical shock can occur. Practical guidance for reliable results Intended for external and internal turning, the insert suits diverse turning operations when paired with the appropriate chipbreaker and holder. For best performance, adopt cutting data that reflect workpiece stability and machine rigidity, and select the chipbreaker and grade according to the material and machining type. If further machining data or size compatibility checks are required, Metav Werkzeuge provides application support and can recommend the correct holder and clamping set to match the ISO SNMG system. For application advice, availability and to order the Tungaloy SNMG120408 T9215 turning insert contact Metav Werkzeuge; consultants can be reached at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6774110 Manufacturer SKU: TUN6774110 Manufacturer: Tungaloy Material: carbide Grade/coating: T9215 / CVD-coated Model series: ISO turning indexable inserts Facts Corner radius: 0.8 mm Plate size: 12 mm Plate thickness: 4.76 mm Free/clearance angle: 0° Included angle: 90° Hole: with cylindrical hole Special features ISO SNMG format Square plate form Double-sided chipbreaker Suited for medium steel machining Designed for external and internal turning Compatibility depends on form, clearance, tolerance class, fixing, size and thickness FAQ What materials is this insert primarily designed for? The SNMG120408 T9215 indexable insert is optimised for medium steel; the T9215 grade with CVD coating combines wear resistance and toughness for productive steel turning. Is the insert compatible with standard SNMG toolholders? Yes, the insert conforms to the ISO SNMG series; compatibility is achieved when holder form, clearance angle, tolerance class, fixing, size and thickness match the insert. Can this insert be used for interrupted cuts? The grade is suitable for continuous to light interrupted cuts; for heavy interruptions a different grade or reinforced geometry should be considered. How does the double-sided chipbreaker affect usage? The double-sided chipbreaker ensures consistent chip control and allows the insert to be indexed to fresh edges, supporting predictable performance and longer edge life. What are the SKU and article number for ordering? The article number is 6774110 and the manufacturer SKU is TUN6774110 for the Tungaloy SNMG120408 T9215 turning insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com