SNMG 120412 T5105 Wendeplatten - Tungaloy
Benefit from a CVD‑coated carbide grade that delivers high wear resistance and stable cutting at high speeds for cast iron turning; the ISO compatibility and square, 90° form ensure simple integration into standard holder systems. Order the insert directly via Metav Werkzeuge or contact our consultants for holder and grade selection. SNMG 120412 T5105 ISO indexable turning insert for turning, Tungaloy The SNMG120412 T5105 is an ISO‑standard indexable turning insert engineered for high‑speed machining of cast iron under stable setup conditions. CVD‑coated carbide grade T5105 Optimised for high‑speed cast iron turning Double‑sided geometry with 1.2 mm radius ISO‑standard SNMG 120412, 90° cutting angle Reliable wear performance for productive turning The insert’s CVD‑coated carbide composition (T5105) provides a hard, wear‑resistant surface that reduces flank and crater wear during high‑speed operations on cast iron. This leads to longer tool life and fewer index changes, which improves machine uptime and lowers overall process costs. The 1.2 mm corner radius and 90° cutting angle support robust engagement and predictable chip formation, while the 4.76 mm thickness contributes to stiffness and vibration resistance in stable setups. Easy integration into ISO tooling systems Compatibility is determined by the insert’s shape, clearance angle, tolerance class, fixing and size; the SNMG form and ISO designation simplify selection of matching toolholders and clamping sets. The insert is supplied with a cylindrical hole for secure fastening and is double‑sided, offering two usable cutting edges per index. Where process reliability matters, pairing the insert with a correctly specified holder and clamp set reduces run‑out and improves repeatability, particularly for external and internal turning tasks. Practical advantages for everyday workshop use For production shops seeking consistent surface finishes and efficient chip control, the optimised chipbreaker geometry and the grade’s behaviour under stable conditions translate into predictable material removal and fewer process interruptions. The system approach — insert, holder, underlay/clamp and replacement screws — allows quick reconditioning of tool assemblies. This insert is ideal for turning operations where repeatability, productivity and low maintenance effort are priorities. For tailored advice on selecting the correct holder, chipbreaker and machining parameters for the Tungaloy SNMG120412 T5105 insert, contact Metav Werkzeuge for technical consultation and matching components Technical data Article number: 6852989 Manufacturer SKU: TUN6852989 Metav SKU: 6852989-Tungaloy Model series: ISO‑Drehwendeschneidplatten Core specifications Radius: 1.2 mm Thickness: 4.76 mm Size (inscribed circle): 12 mm Cutting angle: 90° Clearance angle: 0° Special features Grade: T5105 (CVD‑coated carbide) Material: carbide Shape: square (SNMG) Hole: with cylindrical hole Chipbreaker: double‑sided Typical application: turning of cast iron System: insert compatible with ISO holders; requires underlay/clamp and screws FAQ What materials is this insert best suited for? The SNMG120412 T5105 insert is optimised for high‑speed machining of cast iron; the CVD‑coated T5105 grade provides improved wear resistance for this material group. How many cutting edges are available per insert? The insert is double‑sided, providing two usable cutting edges per index before reconditioning or disposal. Does the insert fit standard ISO toolholders? Yes, the SNMG form and ISO designation ensure compatibility with standard ISO indexable turning holders, subject to matching the insert thickness, hole style and tolerance class. What is the corner radius and how does it affect performance? The corner radius is 1.2 mm; this radius balances strength and surface finish, enabling stable cutting and good tolerance to interrupted cuts when set up correctly. Is the cutting edge suitable for internal as well as external turning? The geometry and 90° cutting angle make the insert suitable for both external and internal turning operations when used with the appropriate holder and support. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNMG 120412 T5105 Wendeplatten - Tungaloy
The combination of CVD-coated carbide wear resistance and ISO conformity delivers consistent tool life and process stability; the square, 90° geometry with a 1.2 mm corner radius supports reliable external and internal turning operations. Order via Metav Werkzeuge or consult the technical team for application matching. SNMG 120412 T5105 — turning insert for turning, Tungaloy The SNMG120412 T5105 is an ISO-standard indexable turning insert optimised for high‑speed machining of cast iron under stable cutting conditions. CVD-coated carbide grade T5105 Optimised for high-speed cast iron turning SNMG 90° square insert with 1.2 mm radius Double-sided chipbreaker, cylindrical hole for fixing Engineered for reliable high‑speed machining Designed around a CVD-coated carbide T5105 grade, this indexable insert provides elevated wear resistance and thermal stability that support increased cutting speeds in repetitive turning tasks. The coating improves abrasive and adhesive wear behaviour, which translates into longer in‑process tool life and more consistent component dimensions. For machining operations on cast iron, the combination of substrate and coating promotes controlled chip formation and reduced flank wear, aiding predictable cycle times and fewer in‑process interruptions. Precise geometry and ISO compatibility for predictable fits The ISO designation guarantees that the insert fits within established holder systems when form, relief angle, tolerance class, clamping and size match. The square, 90° arrangement and 1.2 mm corner radius balance edge strength and accessibility for profile work, while the 0° relief establishes a neutral clearance useful in many external and internal turning setups. The insert is double-sided and features a cylindrical hole, enabling secure clamping and economical indexing; compatibility should be checked against the specific holder geometry and tolerance class to ensure the expected repeatability and clamping force. Operational benefits: productivity, handling and stability As a two‑face indexable solution with an integrated chipbreaker, the insert reduces tool change frequency and supports consistent chip control under the intended stable cutting conditions. The chipbreaker design assists in producing manageable swarf, which contributes to safer machine operation and fewer interruptions for clearing. Using an ISO‑compliant insert simplifies inventory management and eases replacement compared with bespoke geometries. Where machining stability is present, this configuration helps maintain surface finish and dimensional control while keeping spindle time efficient. For tailored advice on process parameters or to request the SNMG120412 T5105 insert from Metav Werkzeuge, please contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 for application support and ordering guidance. Technical data Article number: 6850263 SKU: 6850263-Tungaloy Manufacturer SKU: TUN6850263 Designation: SNMG120412 Series: ISO turning inserts Application: Turning Core specifications Insert size: 12 mm Thickness: 4.76 mm Corner radius: 1.2 mm Included angle: 90° Relief angle: 0° Hole style: cylindrical Geometry: square Materials & features Material: CVD-coated carbide Grade: T5105 Chipbreaker: double-sided Insert type: indexable turning insert Hole: with hole (cylindrical) Intended use: high‑speed machining of cast iron under stable conditions FAQ Is the SNMG120412 compatible with standard ISO turning holders? The SNMG120412 is an ISO‑design insert; compatibility depends on holder form, relief angle, tolerance class, clamping and size — confirm the holder accepts SNMG geometry before fitment. Which materials is this grade suited for? Grade T5105 with a CVD coating is specified for wear‑resistant, high‑speed machining of cast iron; the SNMG120412 insert performs best under stable cutting conditions on cast iron. What are the fixing and clamping characteristics? The insert features a cylindrical hole for positive clamping and a square, 90° shape that, when assembled with the correct clamping set, provides secure indexing and repeatable positioning. How does the chipbreaker affect machining? The double‑sided chipbreaker supports controlled chip formation and evacuation, which promotes consistent surface finish and reduces the need for manual swarf handling during turning operations. Which SKU should be ordered for this specific insert? Order using SKU 6850263‑Tungaloy or Manufacturer SKU TUN6850263 to ensure the SNMG120412 T5105 insert from Tungaloy is supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120412 T5105 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated T5105 carbide for high wear resistance, the ISO SNMG120412 geometry for straightforward holder compatibility, and the double-sided chipbreaker for efficient indexation; order directly via Metav Werkzeuge or consult our specialists for application-specific advice. SNMG 120412 T5105 indexable insert for turning — Tungaloy A SNMG120412 T5105 indexable insert engineered for stable, high-speed external and internal turning operations, optimised for cast iron under secure clamping conditions CVD-coated T5105 carbide grade Designed for high-speed cast iron turning ISO SNMG120412 geometry, square insert Double-sided chipbreaker with cylindrical hole High wear resistance for consistent high-speed machining The CVD-coated T5105 grade provides high wear resistance and is optimised for productive, high-speed machining of cast iron under stable setup conditions. The CVD coating enhances surface hardness and reduces flank wear, extending cutting edge life and allowing longer uninterrupted production runs. For operations where tool life and consistent results matter, the coating and substrate combination minimises downtime caused by frequent insert changes while maintaining surface finish and dimensional stability. ISO geometry that simplifies holder selection and reduces setup errors Built to the ISO SNMG120412 standard, the insert’s shape and dimensions ensure predictable compatibility with a wide range of external holders and boring bars. Holder fit is determined by form, clearance angle, tolerance class, attachment method, size and thickness; the standardised geometry reduces the need for bespoke clamping solutions and shortens setup time. The listed 0° clearance angle and square form provide familiar kinematics for common turning tasks, helping to maintain machine dynamics and reproducible results. Double-sided chip control and easy indexation for productive shifts The double-sided chipbreaker design gives two indexable cutting edges per corner, improving economy per insert and enabling rapid indexation when one edge is worn. A 1.2 mm corner radius balances strength and edge form for robust turning, while the cylindrical hole secures the insert reliably in the seat and supports consistent chip formation. Effective chip control reduces the risk of workpiece damage and facilitates automated or unmanned shifts with fewer interruptions. System benefits: integration with holders, clamps and maintenance routines An efficient turning setup is a system: ISO insert, compatible external holder or boring bar, an appropriate clamp set and correct screw torque deliver repeatable results. The 4.76 mm plate thickness and 12 mm size make the insert suitable for many standard toolholders; correct selection of chipbreaker and grade depending on workpiece material and machine stability will yield the best combination of productivity and tool life. Regular inspection and correct mounting prolong service life and contribute to process reliability across production runs. Contact Metav Werkzeuge to discuss how Tungaloy’s CVD-coated T5105 grade and ISO SNMG120412 geometry can improve machining uptime and process stability — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6850258 Manufacturer SKU: TUN6850258 Vendor SKU: 6850258-Tungaloy Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Facts Shape / designation: SNMG120412 Size: 12 mm Thickness: 4.76 mm Corner radius: 1.2 mm Clearance angle: 0° Included hole: with hole (cylindrical) Approach/lead angle: 90° Special features Coating: CVD-coated Grade: T5105 Chipbreaker: double-sided Plate form: square Typical application: turning (external and internal) Optimised for: cast iron machining in stable conditions FAQ What materials is this insert best suited for? The SNMG120412 T5105 indexable insert is engineered primarily for cast iron machining; the CVD-coated T5105 grade offers wear resistance in high-speed cutting when the setup is stable. Is the insert compatible with standard SNMG holders? Yes, the ISO SNMG120412 geometry ensures compatibility with holders designed for SNMG inserts, provided form, clearance, tolerance class, attachment and thickness match the holder specifications. How many usable cutting edges are available per insert? The double-sided design offers multiple indexable edges; each face can be rotated to present a fresh cutting edge, improving economy and reducing changeover frequency. What does the 1.2 mm corner radius mean for finishing? A 1.2 mm corner radius provides stronger edge support and better finish on interrupted or heavy cuts while slightly influencing minimum achievable corner radii on the workpiece. Can this insert be used for internal turning as well as external turning? Yes, the insert is suitable for both external and internal turning operations when paired with an appropriate boring bar or internal holder that accepts SNMG120412 inserts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120412 T5115 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide and a 90° square geometry for productive, dependable turning of cast iron; the two-sided chipbreaker and cylindrical hole ensure secure clamping and efficient chip control. Order the SNMG120412 T5115 insert directly via Metav Werkzeuge or ask our consultants for setup advice. SNMG120412 T5115 ISO turning indexable insert — Tungaloy SNMG120412 T5115 is an ISO‑standard square insert for turning operations, engineered for cast iron machining with a balanced mix of wear resistance and cutting-edge stability. CVD-coated carbide grade T5115 Square ISO insert with 90° cutting edge Double-sided chipbreaker for consistent chips Cylindrical hole for reliable clamping Stable cutting performance for cast-iron turning The SNMG120412 T5115 insert brings CVD-coated carbide performance to demanding turning tasks, delivering a reliable balance between wear resistance and edge stability. The coating enhances resistance to abrasive wear typical for grey and nodular cast iron, while the substrate provides toughness at interrupted cuts. The combination reduces tool changes and improves process consistency, making this insert suitable for shopfloor environments where reproducible results and predictable tool life are required. Secure clamping and chip control that improve uptime A cylindrical hole and the double-sided chipbreaker design ensure positive seating and controlled chip formation during external and internal turning. The square geometry with 90° main cutting angle provides robust support at the corner, while the 1.2 mm corner radius contributes to edge strength and surface finish. These features lower the risk of edge chipping and reduce unexpected downtime, supporting efficient production cycles and straightforward insert indexing to the next cutting edge. Compatibility and practical handling for workshop integration ISO compliance and the specified dimensions (12 mm size, 4.76 mm thickness) simplify selection of matching holders and bar tooling: compatibility depends on insert form, relief angle, tolerance class, fastening method, size and thickness. The neutral 0° relief angle gives a standard geometry for versatile cutting approaches. The insert’s universal grade is particularly suited to cast-iron applications but can be evaluated against other materials depending on machining parameters and workpiece stability. Documentation of holder fit and clamping torque is advised to achieve the best performance. For reliable cast-iron machining with proven Tungaloy performance, request SNMG120412 T5115 inserts from Metav Werkzeuge or contact our technical team at info@metav-werkzeuge.com or +49 2822 7131930 for tailored recommendations. Technical data Article number: 6852990 Manufacturer SKU: TUN6852990 SKU: 6852990-Tungaloy Model series: ISO-Drehwendeschneidplatten Manufacturer: Tungaloy Facts Size: 12 mm Thickness: 4.76 mm Corner radius: 1.2 mm Cutting angle: 90° Relief angle: 0° Hole: with hole (cylindrical hole) Special features Material: carbide Coating: CVD coating Grade: T5115 (universal for cast iron) Chipbreaker: double-sided Plate shape: square Typical application: turning (external and internal) FAQ What material is this insert best suited for? The SNMG120412 T5115 insert is formulated for cast iron machining; the T5115 grade provides a balanced combination of wear resistance and cutting-edge stability for such materials. How does the chipbreaker benefit production? The double-sided chipbreaker on this insert secures consistent chip formation and evacuation, supporting uninterrupted cycles and reducing the risk of built-up edge. Is the insert compatible with standard ISO holders? ISO standard dimensions (size 12, thickness 4.76 mm, cylindrical hole) facilitate compatibility; holder fit depends on form, clearance, tolerance class, fastening and thickness. How many cutting edges are available per insert? The two-sided design allows indexing to the opposite cutting edge, effectively extending usable life compared with single-sided variants. What is the corner radius significance? The 1.2 mm corner radius increases edge toughness for interrupted cuts and contributes to improved surface finish and tool life under stable machining conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120412 T5115 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide T5115 and the ISO-standard SNMG form for consistent cast-iron turning performance; the double-sided chipbreaker and 1.2 mm corner radius deliver stable chip control and predictable tool life. Order directly via Metav Werkzeuge or consult the technical advisors for application support. SNMG120412 T5115 SNMG turning insert — CVD-coated carbide for cast iron | Tungaloy The SNMG120412 T5115 is an ISO-standard turning insert designed for external and internal turning operations, offering a universal CVD-coated carbide grade optimised for cast-iron machining. CVD-coated carbide T5115 for cast iron Double-sided chipbreaker for consistent chips Square form with cylindrical hole for secure mounting 1.2 mm corner radius and 0° clearance angle Consistent cutting performance where cast iron matters The combination of a CVD-coated carbide substrate and the T5115 grade provides a balanced mix of wear resistance and edge stability tailored for cast-iron machining. The coating reduces flank wear at higher cutting speeds and helps maintain a stable cutting edge over successive indexed positions, which supports predictable process windows in production. This makes the insert suitable for batch runs and repeatable turning tasks where surface finish and dimensional stability are priorities. Secure fit and form for reliable toolholding Manufactured to the ISO SNMG120412 geometry, the insert features a square form, cylindrical hole, and a nominal plate thickness of 4.76 mm, which together determine compatibility with a wide range of external holders and boring bars. Compatibility depends on form, relief angle, tolerance class, fastening method, size and thickness, so the insert sits securely in the pocket and transmits cutting forces reliably. The 0° relief angle and 90° included angle suit a broad set of holder types for general turning. Efficient chip control and application guidance The double-sided chipbreaker design supports controlled chip formation when turning cast iron, reducing potential for tangled chips and easing automated handling. With a 1.2 mm corner radius, the insert balances robustness and edge strength against the need for fine surface finishes. Typical uses include finishing and medium turning of cast-iron components; selection of a matching chipbreaker and grade ensures optimal performance depending on workpiece stability and cutting parameters. For tailored recommendations on integrating Tungaloy turning inserts into production processes, contact Metav Werkzeuge for application advice and availability Technical data Article number: 6850261 Manufacturer SKU: TUN6850261 SKU: 6850261-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Carbide Core data Insert designation: SNMG120412 Grade: T5115 Corner radius: 1.2 mm Plate size: 12 mm Plate thickness: 4.76 mm Included angle: 90° Relief/clearance angle: 0° Special features CVD-coated carbide grade T5115 Double-sided chipbreaker Square form insert With cylindrical hole ISO-standard turning insert Application: Turning Compatibility dependent on form, relief angle, tolerance, fastening, size and thickness FAQ What materials is this insert best suited for? The SNMG120412 T5115 insert is formulated as a universal grade for cast iron, providing a balance of wear resistance and edge stability specifically for cast-iron turning. How does the T5115 coating affect cutting performance? The CVD coating on the T5115 grade improves wear resistance and helps maintain a stable cutting edge at elevated speeds, which benefits surface finish and reproducibility when using the SNMG insert. Is the insert compatible with standard SNMG holders? Yes, the SNMG120412 geometry conforms to ISO SNMG standards; compatibility with a holder depends on form, clearance, tolerance class, fastening method, size and thickness. What is the corner radius and why does it matter? The corner radius is 1.2 mm; a larger radius enhances edge strength and reduces the risk of chipping, while still allowing good surface finish in many turning operations. Can this insert be used for internal turning? The insert can be employed for both external and internal turning, provided the selected holder or boring bar accommodates the SNMG120412 form and dimensions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120412 T5115 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide wear resistance, precise 1.2 mm corner radius for stable cutting, and straightforward ISO compatibility to keep turning operations productive and predictable; order availability and further advice are available via Metav Werkzeuge. SNMG 120412 T5115 ISO turning insert, CVD-coated — Tungaloy The SNMG120412 T5115 is an ISO-standard, CVD-coated carbide indexable insert designed for external and internal turning, optimised for reliable machining of cast iron. ISO SNMG 120412 geometry CVD-coated carbide for cast iron Double-sided chipbreaker 1.2 mm corner radius Square plate, 90° cutting angle Consistent edge life through CVD-coated carbide The CVD-coated carbide grade T5115 provides a balanced combination of wear resistance and edge stability, which translates into fewer tool changes and steadier process output when machining cast iron. The coating reduces abrasive wear and helps maintain a cutting edge at elevated temperatures, resulting in consistently predictable surface finish and longer service periods between indexings. This performance advantage supports higher machine utilisation and reduces unplanned stoppages, making production planning more reliable. Precise geometry for improved chip control and stability The insert’s double-sided chipbreaker and 1.2 mm corner radius promote controlled chip formation and secure cutting behaviour in interrupted or stable cuts. The square form with a 90° lead angle offers robust support at the cutting edge, reducing chatter and deflection on less rigid setups. Improved chip control lowers the risk of built-up edge and workpiece rework, while the compact corner radius helps achieve a balance between edge strength and fine surface quality during finishing passes. ISO compatibility that simplifies tool selection and setup Designed to the ISO designation SNMG120412, the insert integrates easily into standard indexable tooling systems; compatibility with a holder depends on form, clearance angle, tolerance class, fastening, size and thickness. This ISO conformity streamlines procurement and replacement logistics and allows for quick changeovers between toolholders and machines. For customers aiming to harmonise tool inventories across machines, the standard geometry reduces the need for bespoke holders and shortens setup times. Application guidance and handling advantages Intended primarily for turning operations on cast iron, the insert’s universal grade and balanced geometry make it suitable for a range of roughing and finishing tasks. The cylindrical hole and standard thickness of 4.76 mm ensure secure clamping in compatible holders, while the double-sided design permits economical indexing. Selecting the appropriate chipbreaker and feed parameters according to workpiece stability will maximise the grade’s life and maintain dimensional accuracy in serial production. For availability of the Tungaloy SNMG120412 T5115 insert and tailored advice on holder compatibility, contact Metav Werkzeuge for technical guidance and rapid supply via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6850264 SKU: 6850264-Tungaloy Manufacturer SKU: TUN6850264 Manufacturer: Tungaloy Facts Size: 12 mm Thickness: 4.76 mm Corner radius: 1.2 mm Free clearance angle: 0° Plate angle: 90° Special features ISO designation: SNMG120412 CVD-coated carbide Grade: T5115 (universal for cast iron) Double-sided chipbreaker Square plate with cylindrical hole Model series: ISO indexable turning inserts Application: turning (external and internal) FAQ What machining tasks is this insert designed for? The SNMG120412 T5115 insert is designed for external and internal turning, with a universal grade optimised for machining cast iron. Which materials are best suited to this grade? Grade T5115 is formulated for cast iron and provides a balance of wear resistance and edge stability suitable for a wide range of grey and ductile cast-iron applications. What are the key dimensional specifications to check before fitting? Check the plate size (12 mm), thickness (4.76 mm), corner radius (1.2 mm) and the ISO designation SNMG120412 to ensure correct holder fit and clamping. How does the chipbreaker design affect machining? The double-sided chipbreaker promotes stable chip formation and evacuation, enhancing process reliability and reducing the risk of built-up edge during longer machining cycles. How is holder compatibility determined for this insert? Holder compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness; matching these parameters ensures secure clamping and correct cutting geometry. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120412 T5115 Wendeplatten - Tungaloy
Take advantage of the combination of CVD‑coated carbide grade T5115, stable chip control and a square, 90° geometry for reliable turning of cast‑iron parts; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. SNMG 120412 T5115 SNMG — Indexable Turning Insert for Turning by Tungaloy SNMG120412 T5115 is a square, ISO‑format indexable insert designed for external and internal turning operations in cast iron and similar materials. ISO‑standard SNMG profile, 90° cutting angle CVD‑coated carbide grade T5115 for cast iron Square, 12 mm size with 1.2 mm corner radius Double‑sided insert with cylindrical hole High wear resistance and balanced edge stability for cast‑iron turning The CVD‑coated T5115 grade combines wear resistance with edge robustness to deliver consistent tool life when machining cast iron. The coating reduces flank wear and extends the interval between indexings, which leads to fewer tool changes and improved process efficiency. For shops aiming to keep cycle times predictable, the combination of carbide substrate and a proven coating provides a clear advantage in repeatability and surface integrity. Designed for reliable fitment and secure clamping Compliance with ISO dimensions ensures that the insert fits a wide range of standard holders; compatibility is governed by form, clearance angle 0°, tolerance class, clamping method, size and thickness. The cylindrical hole and standard geometry permit secure fastening in most external holders and boring bars, supporting stable cutting conditions and minimising vibration. This predictable interface reduces setup time and helps maintain machining accuracy across batches. Geometry that supports predictable chip control and robust performance The square 12 mm format with a 1.2 mm corner radius and 4.76 mm thickness gives a balance between strength and versatility. The double‑sided chipbreaker enables economical edge usage and improves chip control, especially in interrupted cuts typical of cast‑iron components. The right selection of chipbreaker and grade yields consistent cutting forces and reduces the risk of premature edge chipping, contributing to a stable production flow. Practical application guidance to maximise productivity Intended for both external and internal turning, the insert performs best when matched to the workpiece stability and cutting parameters; choosing the appropriate chipbreaker and feed rates improves surface finish and tool life. Where high material removal is required, the sturdy geometry and T5115 grade support robust feeds and moderate depths of cut. For finishing, lower feeds with the same insert maintain edge integrity and produce the desired surface quality while keeping tooling costs in check. For machining cast iron with confidence, rely on Tungaloy’s T5115 inserts—contact Metav Werkzeuge for tailored recommendations or to discuss holder compatibility at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6850259 SKU: 6850259-Tungaloy Manufacturer SKU: TUN6850259 Product designation: SNMG120412 T5115 Tungaloy indexable insert Core specifications Insert designation: SNMG120412 Size: 12 mm Thickness: 4.76 mm Corner radius: 1.2 mm Cutting angle: 90° Clearance angle: 0° Features & materials Material: carbide (cemented carbide) Coating: CVD‑coated (T5115) Shape: square Hole: with cylindrical hole Chipbreaker: double‑sided Application: turning (external and internal) Model series: ISO turning indexable inserts Compatibility: determined by form, clearance angle, tolerance class, clamping, size and thickness FAQ What materials is this insert optimised for? The SNMG120412 T5115 insert is optimised for machining cast iron, using the CVD‑coated T5115 grade to balance wear resistance and edge stability. Can the insert be used for both external and internal turning? Yes. The SNMG120412 geometry and the standard hole allow use in appropriate external holders and boring bars for both external and internal turning operations. How many usable cutting edges does the insert offer? With a double‑sided chipbreaker and square form, the insert provides multiple indexable edges before replacement is required, supporting economical edge usage. What does the T5115 grade indicate in practical terms? The T5115 designation denotes a CVD‑coated carbide grade developed for broad cast‑iron applications, offering a compromise between wear resistance and edge strength for reliable performance. Is holder compatibility guaranteed for all ISO SNMG holders? Compatibility follows ISO form factors, but correct fit depends on clearance angle, tolerance class, clamping and the holder design; selecting a matching holder ensures secure clamping and optimal cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120412 T5125 Wendeplatten - Tungaloy
Benefit from the combination of a CVD-coated carbide grade and a robust 90° insert geometry for productive cast-iron turning, together with a 1.2 mm corner radius that balances strength and finish. Order the SNMG120412 T5125 indexable insert via Metav Werkzeuge or contact their consultants for application guidance. SNMG120412 T5125 — ISO indexable turning insert, CVD-coated carbide (Tungaloy) The SNMG120412 T5125 is an ISO-standard indexable insert for external and internal turning, designed for cast-iron machining and optimised for interrupted cuts and less stable cutting conditions. ISO SNMG 120412 geometry, 90° cutting angle CVD-coated T5125 carbide for cast iron Double-sided insert with 1.2 mm corner radius Square plate, 12 mm size, 4.76 mm thickness Stable performance for cast-iron turning with a tougher grade The CVD-coated carbide grade T5125 provides a tougher substrate and a wear-resistant coating that improves edge stability under fluctuating loads. This makes the insert particularly suitable for cast iron where interruptions or uneven cutting conditions are common. Because the grade is designed to absorb shock without premature chipping, tool life is extended and machining remains consistent; the coating further supports thermal and abrasive resistance. The combination of CVD-coated carbide and the insert’s geometry reduces the frequency of index changes and supports a steady production flow while maintaining surface quality. System compatibility and secure clamping for repeatable results The insert conforms to the ISO SNMG form and therefore depends on the mating holder for correct performance: shape, clearance angle, tolerance class, fastening method, size and plate thickness determine compatibility. The SNMG120412 features a cylindrical hole for positive location and works with standard clamping sets and replacement screws as part of an ISO-compatible system. Selecting a holder with the correct seat geometry and a matching chipbreaker ensures reliable chip flow and reduces vibration. This system approach simplifies tool management and makes replacement straightforward when inserts reach the end of their service life. Operational benefits and practical application guidance The double-sided design and a 1.2 mm corner radius strike a practical balance between edge strength and surface finish. The 90° geometry offers general-purpose turning capability for both external and internal operations, while the square plate (12 mm) and 4.76 mm plate thickness provide good rigidity when mounted correctly. For improved results, choose a chipbreaker suited to the workpiece condition and the machining stability available; lighter cuts and stable setups favour finer finishes, while the tougher grade tolerates interrupted or unstable cuts better. For further technical advice or specific application data, Metav Werkzeuge is available to assist at info@metav-werkzeuge.com or by telephone on +49 2822 7131930. Contact Metav Werkzeuge for application advice and to secure Tungaloy SNMG120412 T5125 indexable inserts for cast-iron turning Technical data Article number: 6852991 SKU: 6852991-Tungaloy Manufacturer SKU: TUN6852991 Brand: Tungaloy Series: ISO-Drehwendeschneidplatten Product name: SNMG120412 T5125 Tungaloy indexable insert Core data Corner radius: 1.2 mm Plate size: 12 mm Plate thickness: 4.76 mm Cutting angle: 90° Clearance angle: 0° Special features CVD-coated carbide Grade T5125 Double-sided chipbreaker Square plate form Cylindrical locating hole Application: Turning Material: carbide FAQ Which materials is this insert best suited for? The SNMG120412 T5125 is tailored for machining cast iron; the tougher T5125 grade handles interrupted cuts and less stable conditions particularly well. How is compatibility with holders ensured? Compatibility follows the ISO SNMG form: the holder must match the insert’s seat geometry, clearance angle, tolerance class, fastening method and size to ensure correct mounting and performance. What advantages does the T5125 grade provide? T5125 is a CVD-coated carbide grade that combines a tougher substrate with a wear-resistant coating, improving edge stability and resistance to chipping under shock loads. Is the insert reversible and how does the double-sided design help? The double-sided construction increases the number of usable edges and improves cost efficiency by extending the service life before replacement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120412 T5125 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide grade T5125, a 1.2 mm corner radius and ISO compatibility for reliable interrupted turning of cast iron; order the insert directly via Metav Werkzeuge or consult the technical team for application guidance. SNMG120412 T5125 — ISO turning insert for interrupted cast-iron turning by Tungaloy SNMG120412 T5125 is an ISO‑normed, square turning insert designed for external and internal turning; the geometry and coating suit interrupted cuts and less stable set‑ups. CVD-coated carbide grade T5125 Optimised for interrupted cuts in cast iron Double-sided chipbreaker for versatile use ISO SNMG 120412, 1.2 mm corner radius Consistent cutting performance under interrupted conditions The insert delivers stable chip control and wear resistance through its CVD-coated carbide grade, engineered for tougher cutting conditions. The combination of coating and substrate promotes predictable flank wear and helps maintain dimensional stability during stops and starts typical of interrupted turning. This results in more consistent component tolerances and fewer in-process rejects, an advantage in batch production where reproducibility matters. Secure clamping and universal ISO compatibility The square geometry with a cylindrical hole and specified tolerances ensures compatibility with standard ISO holders; the fit is determined by form, free angle, tolerance class, fastening and plate thickness. The zero-degree free angle and standard interface simplify insert changes and reduce set-up time. Clear guidance on holder selection and torque settings supports faster changeovers and reduces the risk of mounting errors that can shorten tool life. Practical benefits for cast-iron turning and productivity Chosen for cast-iron applications, this grade is tougher to cope with vibration and variable rigidity, offering improved edge stability in interrupted cuts. The 1.2 mm corner radius provides a balance between edge strength and radial engagement, helping to extend tool life while maintaining a good surface finish. Using a double-sided chipbreaker permits economical two‑edge use before indexing, lowering tooling costs per part and supporting continuous, productive machining cycles. Contact Metav Werkzeuge for tailored advice on Tungaloy inserts and specify SNMG120412 T5125 for cast-iron interrupted turning or request application recommendations from our specialists Technical data Article number: 6850265 Manufacturer SKU: TUN6850265 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Grade: T5125 Facts Corner radius: 1.2 mm Plate thickness: 4.76 mm Plate size: 12 mm Insert angle: 90° Free angle: 0° Hole: with hole (cylindrical) Special features CVD-coated carbide Square plate form Double-sided chipbreaker Suitable for turning (external and internal) Designed for interrupted cuts in cast iron Compatibility depends on holder form, tolerance and fastening FAQ What materials is this insert intended for? The SNMG120412 T5125 insert from Tungaloy is designed primarily for machining cast iron, especially under interrupted cutting conditions. How does the T5125 grade improve process reliability? The CVD-coated T5125 substrate offers enhanced edge stability and predictable wear behaviour, which improves repeatability and reduces scrap in demanding turning operations. Is the insert compatible with standard ISO holders? Compatibility is achieved via ISO dimensions; the SNMG120412 form, hole style and thickness match standard ISO holders when the holder’s form, clearance and tolerance class are observed. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120412 T5125 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD‑coated carbide grade (T5125), a 1.2 mm corner radius and ISO conformity to achieve stable turning in interrupted cuts; order via Metav Werkzeuge or consult our specialists for machining recommendations. SNMG 120412 T5125 indexable turning insert by Tungaloy — ISO profile, CVD‑coated carbide for turning The SNMG 120412 T5125 is a CVD‑coated carbide indexable insert designed for external and internal turning, optimised for cast‑iron applications and less stable cutting conditions CVD‑coated carbide grade T5125 Optimised for cast iron interrupted cuts ISO SNMG 120412 profile for standard holders Double‑sided with cylindrical hole Stable chip control for interrupted turning The combination of a CVD‑coated surface and a tougher carbide substrate delivers predictable chip formation even under intermittent cutting. This results in fewer vibrations and a reduced tendency for built‑up edge, which supports consistent surface finish and extended tool life. The T5125 grade is formulated to tolerate impacts and instability typical of interrupted cuts in cast iron, so the machining process becomes more reliable and less dependent on perfect fixturing or exceptionally rigid set‑ups. Geometry tailored for repeatable results A precisely ground geometry with a 1.2 mm corner radius and an included angle of 90° provides a good balance between strength and cutting edge accessibility. The insert’s 0° clearance and square outline are adapted to common turning tasks, offering a robust cutting edge for medium to heavy engagement. The ISO SNMG120412 form ensures interchangeability with standard SNMG holders, enabling rapid replacement and predictable positioning—benefits that translate directly into reduced downtime and easier process control. Easy integration into existing tool systems Compatibility with holders depends on form, clearance angle, tolerance class, fastening and thickness; the square SNMG format and the cylindrical hole support secure clamping in a wide range of external and internal turning holders. The insert’s thickness of 4.76 mm and standard size designation simplify procurement and stocking for production environments. This compatibility reduces the need for special adapters and helps maintain steady production flow when changing grades or chipbreakers. Designed for robust performance and low maintenance The double‑sided design effectively doubles the usable cutting edges, increasing economy per insert and lowering tool change frequency. The combination of a wear‑resistant substrate and the CVD coating improves edge stability and wear resistance, which is particularly advantageous when turning cast iron under fluctuating conditions. Maintenance is straightforward: replace the indexable insert rather than regrinding, keeping machine downtime to a minimum and streamlining tool management. Contact Metav Werkzeuge for availability, grade selection and machining advice on Tungaloy SNMG 120412 T5125 indexable inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations Technical data Article number: 6850262 Manufacturer SKU: TUN6850262 SKU: 6850262-Tungaloy Designation: SNMG120412 Model series: ISO turning inserts Manufacturer: Tungaloy Dimensions & angles Size: 12 mm Thickness: 4.76 mm Corner radius: 1.2 mm Clearance angle: 0° Included angle: 90° Features & materials Material: carbide (cemented carbide) Coating: CVD Grade: T5125 Insert shape: square (SNMG) Hole: with cylindrical hole Chipbreaker: double‑sided Typical application: external and internal turning Suitability: cast iron, interrupted cuts, less stable conditions FAQ Is this insert suitable for interrupted cuts in cast iron? Yes. The SNMG120412 T5125 Tungaloy indexable turning insert features a tougher CVD‑coated carbide grade designed specifically for interrupted cutting in cast iron. Can the SNMG120412 fit standard SNMG holders? Compatibility is determined by form, clearance, tolerance, fastening, size and thickness; the SNMG120412 follows ISO SNMG geometry and is intended for use with standard SNMG external and internal holders. What are the main dimensions of the insert? The insert is 12 mm in size, 4.76 mm thick, with a 1.2 mm corner radius and a 90° included angle. Is the insert reversible or does it offer multiple cutting edges? Yes. The SNMG120412 is double‑sided, providing multiple indexable cutting edges to extend service life and reduce replacement frequency. Which materials is the grade T5125 recommended for? T5125 is a tougher, CVD‑coated carbide grade optimised for cast iron machining under interrupted cuts or less stable conditions. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNMG 120412 T515 Wendeplatten - Tungaloy
A robust blend of CVD‑coated carbide durability and an ISO‑standard SNMG 120412 format delivers efficient, repeatable turning of cast iron; the 1.2 mm corner radius and double‑sided chipbreaker reduce changeovers and extend tool life. Order directly via Metav Werkzeuge or consult the technical team for application guidance. SNMG120412 T515 square turning indexable insert by Tungaloy — CVD‑coated carbide for economical cast‑iron turning The SNMG120412 T515 is an ISO‑standard square indexable insert for turning, engineered for economical roughing and finishing of cast iron with a double‑sided chipbreaker and a cylindrical locating hole for secure clamping CVD‑coated carbide for cast iron machining ISO‑standard SNMG 120412 format Square 12 mm size, 4.76 mm thickness Double‑sided chipbreaker design Consistent productivity through material and geometry The combination of a CVD‑coated carbide grade and a precisely formed cutting edge supports economic machining of cast iron with predictable wear behaviour. The CVD coating builds a hard, wear‑resistant surface that delays flaking and keeps the cutting edge sharp for longer, which translates into fewer indexings and lower tooling costs per workpiece. The insert’s corner radius 1.2 mm balances edge strength and surface finish to allow stable cutting parameters without compromising component quality. Secure seat and standardised format for fast tool changes Designed to the ISO SNMG profile, the insert fits common external holders and boring bars where geometry, screw position and thickness match. The square 12 mm format and cylindrical hole enable reliable clamping and quick replacement, reducing machine downtime. Since the design is double‑sided, two usable cutting edges per index reduce tooling consumption and support efficient shopfloor logistics while maintaining process repeatability. Chip control and edge preparation for reliable turning The integrated double‑sided chipbreaker promotes controlled chip formation and evacuation during interrupted or continuous cuts, lowering the risk of built‑up edge and surface damage. The design works together with a 0° relief angle to present a neutral cutting geometry that suits a wide range of turning operations on cast iron. For machinists seeking consistent surface integrity and long runs between interventions, this insert’s geometry and coating combination is a practical solution. Contact Metav Werkzeuge for tailored advice, application recommendations or to request the SNMG120412 T515 for trial runs — technical consultants are available to ensure the insert matches the holder and machining strategy. Technical data Article number: 6764417 Manufacturer SKU: TUN6764417 Model series: ISO turning indexable inserts Designation: SNMG120412 Facts Corner radius: 1.2 mm Insert size: 12 mm Thickness: 4.76 mm Relief angle: 0° Included angle: 90° Special features Material: carbide Coating: CVD Chipbreaker: double‑sided Hole: with cylindrical hole Shape: square Application: turning; suited for cast iron machining FAQ What materials is this insert intended for? The SNMG120412 T515 is designed primarily for economical machining of cast iron; its CVD coating and grade selection favour chip control and tool life in that material family. Will the insert fit standard SNMG holders? Yes. The SNMG120412 follows ISO dimensions for SNMG inserts and will fit holders that match the SNMG 120412 profile, thickness and hole style. How many cutting edges are available per insert? The insert is double‑sided, providing two usable cutting edges per index to reduce tooling consumption and changeover frequency. What is the effect of the 1.2 mm corner radius? A 1.2 mm corner radius increases edge strength and improves life during heavier cuts while still delivering an acceptable surface finish for many turning operations. Is this insert suitable for interrupted cuts? The robust carbide grade and chipbreaker geometry of the SNMG120412 T515 favour interrupted cutting typical in turning cast iron, supporting stable chip formation and controlled edge wear. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120412 T515 Wendeplatten - Tungaloy
Take advantage of precise cast-iron performance, economical CVD-coated carbide wear resistance and a robust 1.2 mm corner radius for stable turning operations; order the SNMG120412 T515 Tungaloy indexable insert directly via Metav Werkzeuge or ask our consultants if needed. SNMG120412 T515 Tungaloy – ISO indexable turning insert for turning SNMG120412 T515 Tungaloy is an ISO-designated, square indexable insert engineered for efficient external and internal turning of cast iron components CVD-coated carbide for cast iron machining Double-sided chipbreaker for flexible use Square SNMG insert, 12 mm size 1.2 mm corner radius for robust cutting edge High-efficiency cast-iron turning with reliable coating The SNMG120412 T515 is designed around a CVD-coated carbide grade optimised for the economical machining of cast iron. The CVD layer improves resistance to abrasive wear and helps maintain a sharp edge under interrupted cuts, which results in longer tool life and fewer insert changes. For production environments, this translates into a measurable reduction in downtime and more consistent component tolerances, since the coating supports sustained cutting performance under typical turning forces. Stable edge geometry that cuts downtime and inventory A 1.2 mm corner radius combined with a double-sided chipbreaker delivers a balance between edge strength and chip control, making the insert suitable for semi-finish and finish operations where robustness is required. The square shape and 12 mm size provide four usable edges per insert, improving stock efficiency. The 0° relief angle and a cylindrical hole ensure secure clamping in compatible holders; the insert’s 4.76 mm thickness contributes to rigidity and resistance against vibration during heavier cuts. Compatible system integration and selection guidance This ISO insert is part of the standard system comprising an ISO indexable insert, a matching external holder or boring bar, plus shim and clamp set with replacement screws. Compatibility depends on form, relief angle, tolerance class, clamping method, size and thickness. Select the chipbreaker and grade according to material ductility, cut interruptions and desired cutting speed to exploit the Tungaloy quality in recurring production tasks. Proper selection ensures repeatable surface finish and consistent process security across batches. For reliable cast-iron turning with Tungaloy performance, contact Metav Werkzeuge for personalised advice or to place an order—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6733831 Manufacturer SKU: TUN6733831 SKU: 6733831-Tungaloy Model series: ISO indexable turning inserts ISO designation: SNMG120412 Name: SNMG120412 T515 Tungaloy indexable insert Core specifications Material: carbide Coating / grade: T515 (CVD-coated) Application: turning Insert shape / size: square, 12 mm Thickness: 4.76 mm Corner radius: 1.2 mm Special features Relief angle: 0° Lead / approach angle: 90° Hole: with cylindrical hole Chipbreaker: double-sided Typical system: insert + external holder/boring bar + shim/clamp + replacement screws FAQ What materials is this insert suitable for? The SNMG120412 T515 Tungaloy indexable insert is optimised for cast iron machining due to its CVD-coated carbide grade designed for abrasive resistance and stable chip formation. Can the insert be clamped in standard SNMG holders? Yes, the SNMG120412 follows ISO dimensions for SNMG inserts; secure clamping depends on matching form, tolerance class, relief angle and attachment method of the holder. How many cutting edges are available per insert? Being a square, double-sided SNMG insert offers up to four usable cutting edges, which supports economical stocking and reduces replacement frequency. What cutting applications benefit most from this grade? The T515 grade is aimed at economical machining of cast iron in both external and internal turning where wear resistance and reliable chip control are priorities. Does the corner radius affect feed and surface finish? The 1.2 mm corner radius favours edge strength and stability for moderate feeds; it supports improved tool life and a consistent surface finish compared with finer radii. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120412 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide performance, a 1.2 mm corner radius and ISO compatibility for stable, repeatable turning of stainless steel; order the insert directly via Metav Werkzeuge or consult our specialists for process support. SNMG120412 T6215 Tungaloy indexable turning insert — CVD-coated carbide for stainless steel A SNMG120412 T6215 indexable insert engineered for external and internal turning, optimised for stainless steel under stable to slightly interrupted cutting conditions. CVD-coated carbide for wear resistance Optimised for stainless steel turning ISO SNMG120412 square insert, 1.2 mm radius Double-sided chipbreaker for reliable chips 0° clearance angle, 12 mm size, 4.76 mm thickness Consistent tool life through CVD-coated carbide The CVD-coated carbide grade T6215 provides high wear resistance and thermal stability during continuous turning operations. Specified for machining stainless steel, this coating combination helps maintain a consistent cutting edge across longer cycles, reducing unscheduled tool changes and stabilising component tolerances. Where part runs demand reproducible results, the combination of coating and carbide substrate delivers measurable improvements in tool life and process reliability. Improved surface finish and process productivity A double-sided chipbreaker paired with a 1.2 mm corner radius balances edge strength and form control to produce improved surface finishes on external and internal profiles. The insert’s square geometry and 4.76 mm plate thickness increase rigidity, reducing vibration and enabling higher material removal rates with predictable tool behaviour. These characteristics translate into fewer rework operations and a clearer path to cost-efficient production. Easy integration into ISO tool systems for repeatable performance Designed to the ISO SNMG120412 form, compatibility with holders is determined by shape, clearance angle, tolerance class, fastening and size; the cylindrical locating hole ensures secure positioning and repeatable clamping. This standardised approach simplifies inventory management and replacement planning in multi-machine shops. Clear identification and consistent geometry support quick tool swaps and help maintain steady cycle times across diverse turning tasks. Contact Metav Werkzeuge for application advice on the Tungaloy SNMG120412 T6215 insert or to arrange supply and technical guidance via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6877402 Manufacturer article number: 6877402 Manufacturer SKU: TUN6877402 SKU: 6877402-Tungaloy Manufacturer: Tungaloy Core data Corner radius: 1.2 mm Insert thickness: 4.76 mm Insert size: 12 mm Approach angle: 90° Clearance angle: 0° Special features Grade: T6215 (CVD-coated carbide) Shape: square Hole style: cylindrical locating hole Chipbreaker: double-sided Application: turning Model series: ISO turning indexable inserts Compatibility: ISO SNMG120412 FAQ What materials is this insert designed for? The SNMG120412 T6215 insert is designed primarily for stainless steel applications; the T6215 CVD-coated carbide grade provides enhanced wear resistance for such materials. Can the insert be used for both external and internal turning? Yes, the indexable insert is suitable for external and internal turning operations when combined with the appropriate ISO SNMG holder and correct cutting parameters. How does the 1.2 mm corner radius affect machining? The 1.2 mm corner radius increases edge strength and helps achieve a consistent surface finish, making it suitable for moderate-profile turning while preserving durability. Is the insert single- or double-sided? This SNMG120412 insert features a double-sided chipbreaker, allowing the user to rotate the insert and extend its service life. What locating feature ensures secure clamping? The insert is supplied with a cylindrical locating hole, enabling precise positioning and reliable clamping in compatible holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120412 T6215 Wendeplatten - Tungaloy
Take advantage of a CVD-coated carbide T6215 grade that delivers extended wear resistance and stable chip formation for stainless steel turning, combined with the ISO SNMG form for straightforward holder compatibility; order the SNMG120412 T6215 Tungaloy insert directly via Metav Werkzeuge or consult our advisors for application support. SNMG 120412 T6215 Turning Insert by Tungaloy — CVD-coated carbide for stainless steel A SNMG120412 T6215 indexable turning insert engineered for stainless steel machining, offering a robust 1.2 mm corner radius and a double-sided chipbreaker for controlled chips and reliable surface finish. CVD-coated carbide for wear resistance Optimised for stainless steel turning ISO SNMG form for broad holder compatibility Double-sided chipbreaker with 1.2 mm radius Consistent cutting performance and extended edge life The CVD-coated substrate of the T6215 grade is designed to resist abrasive wear and to sustain cutting edge integrity during stable to lightly interrupted turning of stainless steel. Owing to the protective coating, heat and adhesion at the cutting zone are reduced, which leads to more predictable tool life and fewer unplanned tool changes. This insert is therefore suitable where consistent productivity and low variance in component quality are required, and its wear behaviour has been optimised for long series and repeatable setups. Straightforward match with ISO tooling systems Manufactured to the ISO SNMG form, the insert guarantees uncomplicated matching with standard external and internal turning holders when the correct form, clearance angle, tolerance class, fixing method, size and thickness are observed. The square plate geometry with a 90° included angle and a 0° free angle simplifies fixture choices and supports robust clamping. This standardisation reduces tooling inventory complexity and enables efficient replacement across multiple machines and tool posts, supporting lean workshop logistics and predictable setup times. Predictable chip control and improved surface finish The integrated double-sided chipbreaker was developed for controlled chip fragmentation in conjunction with the material-specific cutting data associated with stainless steel. The rounded 1.2 mm corner radius balances edge strength and finish quality: it provides enough robustness for interrupted cuts while still permitting an acceptable surface condition on turned parts. Proper chip control decreases the risk of workpiece or tool damage, lowers rework rates and contributes to consistent batch-to-batch surface quality. System-level benefits for productivity and inventory The insert is supplied as part of an ISO-compliant system consisting of the insert itself, matching external holders or boring bars, a clamping pad or screw set and replacement screws when required. The documented specifications—thickness, inscribed size and hole style—support clear ordering and spare-part management, reducing downtime in production environments. For operations aiming to combine productivity with process stability, the insert’s combination of coating, substrate and geometry delivers an economical balance between lifetime and performance. For reliable stainless steel turning with proven process stability, contact Metav Werkzeuge to request the Tungaloy SNMG120412 T6215 insert or for tailored machining advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6875708 Manufacturer SKU: TUN6875708 Label: SNMG120412 T6215 Tungaloy insert Model series: ISO turning inserts Material: carbide Grade/coating: T6215, CVD-coated Numbers / Core technical data Corner radius: 1.2 mm Thickness: 4.76 mm Inscribed circle (size): 12 mm Included plate angle: 90° Clearance angle: 0° Special features Double-sided chipbreaker Cylindrical hole Square plate form Designed for turning (external & internal) ISO SNMG compatibility (holder fit depends on form, size and thickness) Suited for stainless steel machining under stable to lightly interrupted conditions FAQ Is this insert suitable for turning stainless steel? Yes. The SNMG120412 T6215 insert uses a CVD-coated carbide grade optimised for stainless steel, providing wear resistance and stable chip formation under typical turning conditions. Which holders are compatible with this insert? Holders built for the ISO SNMG form and matching the plate size, thickness and square geometry are compatible; the SNMG120412 specification (12 mm inscribed circle, 4.76 mm thickness, 90°) should be used to select the correct external holder or boring bar. How many cutting edges are available per insert? The insert is double-sided with two usable edges; it can be indexed to present a fresh edge when required, supporting economical edge usage. What corner radius and chip control does the insert offer? The insert features a 1.2 mm corner radius combined with a double-sided chipbreaker, balancing edge robustness and surface finish while promoting controlled chip formation for stainless steel. What is the coating and substrate of the insert? This product uses a CVD-coated carbide substrate in the T6215 grade, chosen for its wear-resistant and process-stable characteristics during turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120412 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide grade T6215, ISO compatibility and a double-sided chipbreaker for dependable turning of stainless steel; order directly via Metav Werkzeuge or consult our specialists for holder matching. SNMG 120412 T6215 turning indexable insert by Tungaloy — CVD-coated carbide, 0° clearance The SNMG 120412 T6215 is a square ISO turning insert designed for external and internal turning, optimised for stable to slightly interrupted machining of stainless steel. SNMG ISO form for standard holders CVD-coated carbide grade T6215 Double-sided chipbreaker for stable cuts Square insert with cylindrical hole Reliable cutting performance for stainless steel The combination of a CVD-coated surface and a wear-resistant carbide body ensures consistent cutting under production conditions. The selected grade T6215 provides a balance between flank wear resistance and edge toughness, meaning longer tool life during continuous turning operations. Where thermal loads and built-up edge are a concern when machining stainless steel, the coating reduces adhesion and improves chip flow, so machining remains predictable and repeatable even at elevated cutting speeds. Designed for secure clamping and easy integration Compatibility with holders is determined by form, clearance, tolerance class, clamping and thickness; the square ISO geometry and the presence of a cylindrical hole permit positive seating and secure fastening in a wide range of external holders or boring bars. The insert’s 0° clearance combined with a standard 90° included angle provides geometrical stability for facing and shoulder turning, reducing vibration and improving surface finish. Clear guidance on holder selection supports quick integration into existing tool systems without guesswork. Productivity and process stability from chip control and geometry The double-sided chipbreaker is tuned to promote consistent chip formation and evacuation under typical turning feeds, reducing the risk of re-cutting and tool edge overload. A corner radius of 1.2 mm helps to improve corner strength and surface integrity, while the square shape allows indexing to multiple edges, delivering cost-efficient use of the cutting material. For jobs that require intermittent cuts or modest variation in stability, this insert’s geometry and grade deliver a reliable compromise between productivity and tool life. For reliable, productive turning with a proven Tungaloy grade, contact Metav Werkzeuge for holder compatibility and ordering details — Metav Werkzeuge is available at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6944780 Manufacturer SKU: TUN6944780 SKU: 6944780-Tungaloy Facts ISO designation: SNMG120412 Size: 12 mm Thickness: 4.76 mm Corner radius: 1.2 mm Clearance angle: 0° Included angle: 90° Special features Grade/coating: T6215, CVD-coated carbide Material: carbide Shape: square Hole: with cylindrical hole Chipbreaker: double-sided Application: turning; external and internal machining Series: ISO turning indexable inserts FAQ What materials is this insert suitable for? The SNMG 120412 T6215 insert is formulated for turning stainless steel and is suitable for stable to slightly interrupted cuts in that material class. How is the insert secured in the holder? The square ISO form with a cylindrical hole permits positive clamping; compatibility depends on form, clearance, tolerance class, clamping method and thickness. What benefits does the T6215 grade provide? Tungaloy’s T6215 grade combines a CVD-coated surface with a tough carbide substrate to improve wear resistance and chip control during continuous turning of stainless steel. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120412 T6215 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide and double-sided chipbreaker for consistent performance in stainless steel turning; the ISO format and standard dimensions ensure quick tool changes and low downtime. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. SNMG 120412 T6215 turning insert — Tungaloy SNMG120412 T6215 is an ISO indexable turning insert designed for precision external and internal turning, optimised for stainless steel under stable to lightly interrupted cut conditions. CVD-coated carbide for stainless steel Double-sided with cylindrical hole ISO SNMG 120412 format 0° clearance, 1.2 mm corner radius Consistent wear resistance for stainless steel turning The SNMG120412 T6215 insert combines a CVD-coated carbide substrate with a grade developed for stainless steel, delivering improved flank wear resistance and longer tool life under appropriate cutting conditions. The CVD coating provides a hard, thermally stable surface that reduces adhesion and galling commonly encountered when machining austenitic alloys. This results in more predictable tool life and reduced rework, which supports higher process reliability on both steady and lightly interrupted cuts. Accurate fit and simple tool change to reduce downtime Manufactured to ISO dimensions, the insert ensures reliable seating and repeatable positioning in compatible holders. The square 12 mm format with a cylindrical hole enables stable clamping and straightforward indexing; being double-sided doubles the usable life before disposal. Clear dimensional standards mean replacement inserts match existing toolholders, simplifying inventory and minimising setup times. The nominal 90° included angle and 1.2 mm corner radius balance edge strength with accessibility in shoulder and face-turning tasks. Improved chip control and surface quality The insert’s double-sided chipbreaker geometry is tuned for turning stainless steels, promoting controllable chip formation and evacuation. Better chip control reduces the risk of re-cutting and workpiece surface damage, helping to deliver consistent surface finish and reduced cycle variability. Selecting the appropriate holder rigidity and cutting parameters enhances these benefits; a stable setup will exploit the grade’s strengths and the chipbreaker’s performance. Typical uses and selection guidance Designed primarily for turning operations, the insert suits both external and internal applications where stainless steel components require repeatable results and good edge life. For best outcomes, pair the insert with a suitably rigid holder and choose feeds and speeds in line with tool vendor recommendations; the 0° clearance and robust edge prepare the insert for interrupted cuts within its intended stability range. For additional technical details or tailored recommendations, Metav Werkzeuge provides consultation to match grade and chipbreaker to the specific workpiece material and machining conditions. Contact Metav Werkzeuge for tailored application advice and to order compatible inserts and spare screws: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6966192 Manufacturer SKU: TUN6966192 Internal SKU: 6966192-Tungaloy Facts ISO designation: 120412 Size: 12 mm Thickness: 4.76 mm Corner radius: 1.2 mm Clearance angle: 0° Included angle: 90° Special features CVD-coated carbide grade T6215 Double-sided chipbreaker Cylindrical hole for secure clamping Square plate form Suited for turning stainless steel FAQ What materials is this insert intended for? The SNMG120412 T6215 insert is formulated for machining stainless steel, offering wear resistance and chip control suited to that material group. Is the insert compatible with standard SNMG toolholders? Yes. The insert is manufactured to ISO SNMG 120412 dimensions and fits holders designed for that format when the holder’s seat form and clamping method match the insert specification. How does the CVD coating affect performance? The CVD coating on the T6215 grade increases thermal stability and wear resistance, reducing adhesion and improving edge life during turning operations in stainless steel. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120412 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide wear resistance and precise 1.2 mm corner radius for steady turning performance; order or request advice from Metav Werkzeuge for quick availability and application support. SNMG120412 T6215 turning insert – CVD-coated carbide, 1.2 mm radius by Tungaloy SNMG120412 is an ISO-format turning insert designed for external and internal turning, optimised for stable to lightly interrupted machining of rostfreier Stahl. CVD-coated carbide wear resistance Square form for 90° shoulder turning Double-sided chipbreaker for economy Compatibility with ISO holders Stable machining and consistent process reliability The CVD-coated carbide grade T6215 delivers high wear resistance under continuous and slightly interrupted cuts, ensuring predictable tool life and fewer tool changes. The combination of a 1.2 mm radius and a square plate geometry provides robust edge strength for shoulder and profile turning while maintaining dimensional stability. For process planners and production managers, this results in lower downtime and a more constant production flow, backed by the insert’s ISO conformity. Fast tool changes and assured compatibility The insert’s ISO designation and standardised form guarantee straightforward integration with matching external holders and boring bars. The cylindrical hole and standard thickness simplify clamping and replacement routines, reducing set-up time. Because compatibility depends on plate form, relief angle, tolerance class, fastening and thickness, selecting holders that match these parameters avoids mismatches and accelerates tool swaps on the shop floor. Coating and substrate explained for practical use The cutting material is Hartmetall (carbide) with a CVD coating that enhances abrasion resistance and thermal stability during turning. This surface treatment suits applications with elevated temperatures and abrasive contact, particularly when machining rostfreier Stahl, where built-up edge and adhesion can shorten tool life. Choosing the T6215 grade means prioritising stable cutting conditions and reliable edge retention over aggressive high-feed strategies. Recommended applications and handling guidance Ideal uses include external and internal turning where stability is moderate and interruptions are light; the double-sided chipbreaker supports economical indexing for two cutting edges per side. The 0° relief angle and 90° plate orientation make the insert especially suitable for shoulder work and precise finishing passes. For best results, match feed and speed to the workpiece alloy and machine rigidity and prefer steady chip evacuation to maintain surface finish and tool life. For technical consultation on using the Tungaloy SNMG120412 T6215 insert in specific turning operations, or to secure immediate stock via Metav Werkzeuge, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt, application-focused advice Technical data Article number: 6875730 Manufacturer SKU: TUN6875730 Seller SKU: 6875730-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Core dimensions Plate designation: SNMG120412 ISO code: 120412 Plate size: 12 mm Thickness: 4.76 mm Corner radius: 1.2 mm Relief angle: 0° Plate form: square Included hole: with cylindrical hole Included angle: 90° Design and special features Coating: CVD coating (T6215) Chipbreaker: double-sided Insert type: ISO turning insert, indexable Typical application: external and internal turning Suitable for: rostfreier Stahl machining FAQ What materials is this insert best suited for? The SNMG120412 T6215 insert is optimised for machining rostfreier Stahl and performs reliably under stable to lightly interrupted cutting conditions. How is the insert clamped in a holder? The insert uses a cylindrical locating hole and standard ISO form; clamping requires a compatible ISO holder matched to plate thickness, form and tolerance class for secure seating. How many usable cutting edges are available per insert? With a double-sided chipbreaker and a square plate design, the insert provides multiple indexing positions, offering economical edge utilisation for the SNMG120412 T6215. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120412 T6215 Wendeplatten - Tungaloy
Combine the CVD-coated carbide grade T6215 with a 1.2 mm corner radius for reliable performance in stable or lightly interrupted turning of rostfreier Stahl; benefit from consistent edge life and order directly via Metav Werkzeuge or consult our technical team for application support. SNMG 120412 T6215 turning insert — Tungaloy SNMG120412 T6215 is an ISO-format turning insert designed for external and internal turning applications, offering a wear-resistant CVD-coated carbide grade and a geometry suited to stable cutting conditions. SNMG120412 geometry for reliable turning CVD-coated carbide grade T6215 for wear resistance 1.2 mm corner radius for robust edge life Double-sided chipbreaker with cylindrical hole High-efficiency turning where tool life matters The combination of the T6215 grade and CVD coating provides a strong, wear-resistant cutting edge that reduces flank wear under stable cutting conditions. This translates into longer intervals between indexings and fewer tool changes, improving machine uptime and reducing per-part tooling cost. The insert's 1.2 mm corner radius supports robust engagement with the workpiece, helping to absorb minor vibrations and maintain a consistent cutting geometry when turning rostfreier Stahl or similar alloys. Clear compatibility and secure clamping for predictable results Designed to the ISO 120412 designation and manufactured as a square insert with a cylindrical hole, the geometry matches a broad range of ISO holders. Compatibility depends on form, clearance angle, tolerance class, fixing method, size and thickness — the standardised dimensions ensure straightforward matching to a suitable external holder or boring bar, while the central hole and fixing interface provide secure clamping and repeatable seating for stable cutting conditions. Coating and substrate engineered for repeatable performance A carbide substrate with a CVD coating gives a balance of toughness and abrasion resistance appropriate for the turned materials and typical toolpaths encountered in production turning. The result is predictable wear progression and a stable cutting edge, which supports reproducible surface finishes and dimensional consistency across batches. When productivity and process stability are priorities, the material and coating selection supports efficient, cost-effective machining. Practical shop-floor advantages and handling guidance The double-sided chipbreaker design offers two usable cutting faces, reducing tooling expenditure while maintaining chip control across a range of depths of cut typical for external and internal turning. The insert thickness and square form support robust clamping, and the 0° clearance angle specification suits common ISO holders for general-purpose turning. For best results, select the chipbreaker and grade combination to match the workpiece material, machining conditions and machine rigidity. Contact Metav Werkzeuge for order and application advice on the SNMG120412 T6215 insert; our specialists are available by e-mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to recommend the optimal holder, cutting parameters and replacement strategy Technical data Article number: 6944783 Manufacturer SKU: TUN6944783 Manufacturer: Tungaloy Data Designation: SNMG120412 Thickness: 4.76 mm Size: 12 mm Corner radius: 1.2 mm Clearance angle: 0° Included hole: cylindrical Included angle: 90° Special features Material: carbide Coating: CVD Grade: T6215 Shape: square Chipbreaker: double-sided Typical application: turning Mounting: ISO-compatible insert with central hole FAQ What materials is this insert suitable for? The SNMG120412 T6215 insert is specified for turning rostfreier Stahl under stable to lightly interrupted conditions; the CVD-coated carbide substrate provides wear resistance suited to such materials. How many cutting edges are available per insert? With a double-sided chipbreaker and square form, the insert offers multiple usable edges before disposal; the design reduces the frequency of insert replacements for the given machining regime. Which holders are compatible with this ISO insert? Compatibility follows ISO geometries — holders matching the SNMG120412 form, size, thickness and central fixing with cylindrical hole are suitable; verify form, clearance angle and tolerance class for a precise fit. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120412 T6215 Wendeplatten - Tungaloy
Combining a CVD-coated carbide (T6215) grade with a 1.2 mm nose radius and a robust double-sided chipbreaker delivers predictable, stable performance when turning rostfreier Stahl; order the insert directly via Metav Werkzeuge or consult our advisors for selection support. SNMG120412 T6215 ISO turning insert for rostfreier Stahl by Tungaloy — CVD-coated carbide, 1.2 mm radius The SNMG120412 T6215 is an ISO-indexable turning insert tailored for external and internal turning of rostfreier Stahl under stable to lightly interrupted cutting conditions. CVD-coated carbide grade T6215 Designed for rostfreier Stahl turning Double-sided chipbreaker for stable cuts 1.2 mm nose radius for versatile profiling Consistent cutting performance for rostfreier Stahl The combination of a CVD-coated surface and a wear-resistant carbide substrate provides reliable cutting behaviour when machining rostfreier Stahl. The applied T6215 grade is formulated for extended tool life under stable to slightly interrupted conditions, reducing unexpected downtime. The insert’s 1.2 mm nose radius supports good edge strength and surface finish on external profiles, while the double-sided chipbreaker promotes consistent chip control, lowering the risk of workpiece damage and enabling steady cycle times in series production. Coating and grade explained for predictable tool life A chemical vapour deposition finish offers a dense, uniform protective layer that resists abrasive wear and built-up edge formation during stainless turning. This CVD-coating reduces friction at the cutting edge and improves flank durability, which translates into longer intervals between indexings. For users less familiar with coating technologies: the coating acts like a high-temperature shield, maintaining edge geometry and helping to keep dimensional tolerances within process windows even under elevated cutting temperatures typical of rostfreier Stahl machining. Quick compatibility and straightforward tool changeovers The insert follows ISO dimensions and is compatible with ISO holders when matched by form, clearance angle and tolerance class. The square plate form with a cylindrical hole and secure fastening makes indexing and replacement rapid, simplifying changeovers on multi-spindle or batch-production machines. The 4.76 mm plate thickness and 90° included angle ensure robust seating in the toolholder; as a result, assembly remains repeatable and stable, which supports process reliability and reduces setup-related scrap. Selective benefits that support productivity goals Choosing this insert supports a rational cost-benefit outcome: the engineered T6215 grade delivers a balance of wear resistance and edge robustness that often reduces total tooling costs per component in rostfreier Stahl work. In practical terms, the insert’s properties help to shorten cycle variance, reduce secondary finishing, and support predictable tool life—criteria that matter in quality-driven production environments. For teams seeking further optimisation, pairing the insert with an appropriately rated holder and fine-tuning feed rates will yield the best compromise between surface finish and productivity. For tailored advice on selecting the right Tungaloy SNMG120412 T6215 insert for rostfreier Stahl turning, or to confirm compatibility with existing holders, contact Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for practical, application-oriented support. Technical Data Article number: 6875803 Manufacturer SKU: TUN6875803 SKU: 6875803-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Facts Insert designation: SNMG120412 Grade/coating: T6215 (CVD-coated) Radius: 1.2 mm Free/clearance angle: 0° Included angle: 90° Plate thickness: 4.76 mm Plate size: 12 mm Special features Square plate form With cylindrical hole Double-sided chipbreaker ISO-indexable turning insert Suited for external and internal turning of rostfreier Stahl FAQ What materials is this insert designed for? The SNMG120412 T6215 insert from Tungaloy is designed primarily for machining rostfreier Stahl under stable to lightly interrupted cutting conditions. How does the T6215 grade affect tool life? The T6215 CVD-coated grade enhances wear resistance and reduces built-up edge, helping the Tungaloy insert maintain cutting geometry and extend usable tool life compared with uncoated alternatives. Is this insert compatible with standard ISO holders? Yes — the SNMG120412 follows ISO dimensions; compatibility depends on matching form, clearance angle, tolerance class, fastening method, size and thickness with the chosen holder. What advantages does the double-sided chipbreaker offer? A double-sided chipbreaker improves chip control on both cutting orientations, promoting stable cutting, improved surface finish and consistent process behaviour when turning rostfreier Stahl. Which article number and SKU identify this product? The insert is listed under article number 6875803 with SKU 6875803-Tungaloy and manufacturer SKU TUN6875803. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120412 T6215 Wendeplatten - Tungaloy
Take advantage of the CVD‑coated T6215 grade and the double‑sided chipbreaker for reliable machining of stainless steels; the ISO‑standard geometry ensures fast tool changes and repeatable results. Order the insert directly via Metav Werkzeuge or consult our specialists if application advice is required. SNMG 120412 T6215 – indexable turning insert (for turning), Tungaloy The SNMG120412 T6215 is an ISO‑standard, CVD‑coated carbide insert intended for stable external and internal turning of stainless steels under stable to slightly interrupted cutting conditions. CVD‑coated carbide for stainless steels Double‑sided chipbreaker for consistent chips ISO SNMG 120412 — square, 90° included angle 1.2 mm corner radius for versatile finishing Improved process reliability and consistent chip control The graded T6215 with CVD‑coating is formulated to deliver enhanced wear resistance when turning stainless steels, reducing flank and crater wear in continuous operations. The double‑sided chipbreaker produces predictable chip forms that simplify chip evacuation and lower the risk of built‑up edge, which stabilises the machining process and reduces unplanned stoppages. Fewer edge changes and steadier cutting parameters directly support higher productivity and repeatable part quality on medium‑duty turning tasks. ISO compatibility and straightforward clamping for rapid changeovers Built to the ISO SNMG 120412 geometry, the insert fits a wide range of square insert holders with a 90° included angle, a cylindrical mounting hole and standard clamping systems. Its key dimensions — 12 mm inscribed diameter and 4.76 mm thickness with a 1.2 mm corner radius and 0° relief — make setup predictable and reduce the need for special spares. The standardised form ensures that replacement is fast and operator errors are minimised, supporting lean tool inventory and predictable process windows. Economic edge life and suggested application range The combination of a wear‑resistant carbide substrate with CVD surface treatment extends tool life for stable turning, improving the cost per cutting edge when compared with uncoated grades. The insert is suited to external and internal turning where consistent surface finish and dimensional control are required; it performs well in stable to slightly interrupted cuts and is especially effective when paired with a rigid holder and appropriate machining parameters. The double‑sided geometry halves tooling cost per edge, while the robust grade reduces frequency of regrinding or replacement. For tailored application support, tool quantity planning or to request technical data sheets for the Tungaloy SNMG120412 T6215 indexable inserts, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our technical advisers will provide practical recommendations for the machining task at hand. Technical data Article number: 6944769 SKU: 6944769-Tungaloy Manufacturer SKU: TUN6944769 Brand: Tungaloy Model series: ISO turning inserts Dimensions & numbers Corner radius: 1.2 mm Inscribed size: 12 mm Thickness: 4.76 mm Included angle: 90° Relief angle: 0° Features & materials Material: Carbide Coating: CVD Grade: T6215 Chipbreaker: double‑sided Shape: square Hole style: cylindrical hole Application: Turning (external and internal) FAQ Which materials is this insert suitable for? The SNMG120412 T6215 insert is designed primarily for machining stainless steels; the Tungaloy T6215 grade and CVD coating favour wear control in these materials. What is the insert geometry and how does it affect cutting? This is an ISO SNMG 120412 square insert with a 90° included angle, 1.2 mm corner radius and 4.76 mm thickness; those dimensions provide a balance between strength and accessibility for finishing and medium stock removal. Is the chip control suitable for automated production? Yes, the double‑sided chipbreaker on the SNMG120412 promotes consistent chip formation, which supports automated loading and reduces interruptions caused by erratic chips. Can the insert be used for interrupted cuts? The T6215 grade performs well in stable to slightly interrupted conditions; for heavy interruptions, a more robust geometry or different grade may be considered. How many cutting edges does one insert provide? The square, double‑sided design offers multiple usable edges per insert, improving cost efficiency compared with single‑edged alternatives. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNMG 120412 T6215 Wendeplatten - Tungaloy
Benefit from the proven combination of CVD-coated carbide T6215 and the ISO SNMG120412 geometry for reliable stainless steel turning; enhanced wear resistance and straightforward indexation help maintain productive machining cycles. Order this insert directly via Metav Werkzeuge or request application advice from the consultants for precise selection. SNMG120412 T6215 ISO turning insert — CVD-coated carbide for stainless steel turning by Tungaloy The SNMG120412 T6215 is an ISO-format turning insert designed for external and internal turning of stainless steels under stable to slightly interrupted cutting conditions, supplied as a square, 90° insert with a cylindrical hole for secure clamping. ISO SNMG form 120412 CVD-coated carbide T6215 1.2 mm corner radius for strength Double-sided chipbreaker with cylindrical hole Consistent wear resistance for stainless steel applications The insert’s CVD-coated carbide composition (grade T6215) provides increased resistance to abrasive and adhesive wear encountered when machining stainless steel. This coating supports longer tool life under continuous operation, reducing the frequency of indexation and tool change. The result is a measurable improvement in process stability and component repeatability while keeping machining costs predictable. ISO conformity and secure clamping for stable cutting Built to the ISO SNMG geometry with a 90° included angle and a cylindrical hole, the insert guarantees mechanical compatibility with standard square insert holders when the form, relief angle, tolerance class, fastening and thickness match. The 0° clearance and square plate shape ensure predictable seating and repeatable positioning, which is essential for maintaining dimensional accuracy across production batches. Productivity gains through chip control and indexability The double-sided chipbreaker design offers reliable chip formation for common stainless steel alloys under stable cutting regimes, enabling cleaner evacuation and fewer interruptions. As an indexable insert, it allows multiple cutting edges to be used before replacement, enhancing uptime and lowering per-part tooling costs. Such characteristics contribute directly to increased machining throughput and more economical operations. Practical selection and system integration guidance Selecting the correct chipbreaker and grade should be based on the workpiece material, cutting strategy and machine-tool stability. The insert functions as one element of a system that includes a compatible external holder, shim/clamp and fastening screw; mismatches in holder geometry or tolerance classes can affect performance. For assistance choosing the optimal combination or verifying holder compatibility, technical consultation is recommended to match insert geometry with clamping method and process conditions. For application-specific recommendations and stock availability of Tungaloy CVD-coated inserts, contact Metav Werkzeuge for personalised advice and prompt supply via info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 6944788 Manufacturer SKU: TUN6944788 SKU: 6944788-Tungaloy Model series: ISO turning inserts Designation: SNMG120412 Grade: T6215 Material: carbide Core specifications Corner radius: 1.2 mm Insert size: 12 mm Thickness: 4.76 mm Included angle: 90° Relief angle: 0° Special features CVD-coated carbide grade T6215 Double-sided chipbreaker Cylindrical hole for secure clamping Square plate form, ISO standard Application: turning stainless steel under stable to slightly interrupted conditions FAQ Which materials is this insert intended for? The SNMG120412 T6215 insert is designed primarily for stainless steel turning under stable to slightly interrupted cutting conditions; the CVD coating supports wear resistance on such materials. How does the chipbreaker affect machining? The double-sided chipbreaker improves chip control for common stainless steel alloys, helping to maintain stable cutting and smoother surface finishes while reducing the risk of chip-related interruptions. What determines holder compatibility for the insert? Compatibility is determined by the insert form, relief angle, tolerance class, fastening type, size and thickness; matching these parameters with the chosen external holder or boring bar ensures correct seating and repeatable performance. Is the insert reversible or indexable? The square SNMG format with a double-sided chipbreaker is indexable, allowing multiple edges to be rotated into service before the insert requires replacement, which supports efficient tool utilisation. Can this insert be used for interrupted cuts? The T6215 grade is optimised for stable to slightly interrupted conditions; more severely interrupted cutting may require a different grade or an adapted cutting strategy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120412 T6215 Wendeplatten - Tungaloy
Combine the wear-resistant CVD coating, 1.2 mm corner radius and a double-sided chipbreaker to achieve consistent, productive turning of stainless steels; order the insert directly via Metav Werkzeuge or consult our specialists for selection support. SNMG120412 T6215 ISO indexable turning insert — CVD-coated carbide, 1.2 mm radius (Tungaloy) The SNMG120412 T6215 is an ISO-standard indexable insert for external and internal turning, optimised for stable to lightly interrupted machining of stainless steels. CVD-coated carbide grade T6215 Designed for stainless steel turning Double-sided chipbreaker for stability Square SNMG insert with 1.2 mm radius High-performance grade for stainless steel machining The CVD-coated carbide grade T6215 combines wear resistance with a cutting geometry tuned to stainless materials, reducing built-up edge and extending tool life. This formation yields a reliable process window under stable cutting conditions, which leads to fewer tool changes and increased uptime. The coating promotes consistent surface finish while permitting moderate cutting parameters for productive throughput. Geometry that promotes process stability A 1.2 mm corner radius and a square shape with a 90° included angle provide robust cutting edges that resist chipping during interrupted cuts. The double-sided chipbreaker helps control chip formation and evacuation, lowering the risk of workpiece damage and machine downtime. Together, these geometrical attributes enable accurate stock removal and consistent component tolerances when turning shafts, sleeves or bores. Secure clamping and ISO compatibility The insert is supplied in the ISO-standard SNMG size with a central cylindrical hole for fastening, ensuring secure attachment to compatible external holders or boring bars. The 0° clearance angle and plate thickness of 4.76 mm match common holder specifications, making integration into existing tool setups straightforward and minimising set-up time. Clear ISO standardisation simplifies logistics and holder selection across production lines. Durable design focussed on repeatability Manufactured from cemented carbide with a CVD coating, this insert offers repeatable performance across batches, improving process reproducibility and part quality. The combination of coating and substrate provides steady wear progression, which supports predictable tool-life planning and easier cost-per-part calculations. For operations prioritising stable runs with stainless steels, this insert supports both small-batch flexibility and larger production runs. Contact Metav Werkzeuge for tailored recommendations or to request a quotation at info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 6944744 Manufacturer SKU: TUN6944744 SKU: 6944744-Tungaloy Brand: Tungaloy Core data Type: SNMG120412 indexable insert Grade: T6215 (CVD-coated carbide) Corner radius: 1.2 mm Thickness: 4.76 mm Size: 12 mm Included angle: 90° Clearance angle: 0° Design & special features Square plate form With central cylindrical hole Double-sided chipbreaker ISO-standard turning insert Suitable for external and internal turning FAQ What materials is this insert suitable for? The insert is designed primarily for stainless steels; the T6215 grade and its CVD coating provide wear resistance and good surface quality when machining rostfreiem Stahl in stable conditions. How is the insert clamped into the holder? The SNMG120412 insert features a central cylindrical hole for secure fastening in compatible external holders or boring bars; the 4.76 mm thickness and ISO form ensure correct fitment. What are the main advantages of the T6215 grade? T6215 offers a CVD-coated carbide composition that emphasises wear resistance and stable cutting behaviour, which helps to extend tool life and maintain consistent results on stainless steels. Can this insert be used for interrupted cuts? Yes; the robust corner radius and double-sided chipbreaker make it suitable for stable to lightly interrupted machining where edge strength and chip control are required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120412 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide T6215, a double-sided chipbreaker and ISO compatibility for consistent turning of rostfreier Stahl; order the insert directly via Metav Werkzeuge or consult our specialists for holder matching and process setup. SNMG120412 T6215 Tungaloy insert — Turning application, ISO SNMG 120412 The SNMG120412 T6215 Tungaloy insert is an ISO‑standard indexable turning insert designed for reliable machining of rostfreier Stahl under stable to lightly interrupted conditions. CVD-coated carbide for wear resistance Optimised for rostfreier Stahl turning ISO SNMG 120412 format, square 12 mm Double-sided chipbreaker design Consistent wear resistance for longer tool life The combination of a CVD-coated carbide substrate and the T6215 grade delivers elevated resistance against abrasive wear typical when machining rostfreier Stahl. The chemical vapour deposition layer forms a hard, adherent surface that reduces flank and crater wear, which helps to maintain cutting geometry over multiple indexings. For production environments this translates into fewer insert changes, predictable tool life and improved process stability when the machining conditions remain steady or only slightly interrupted. Straightforward compatibility and secure clamping Designed to the ISO SNMG 120412 format, this square insert (12 mm) with 4.76 mm thickness and corner radius 1.2 mm fits holders that match form, rake, tolerance class, attachment method, size and thickness. The insert’s 0° clearance and 90° cutting angle require a matching seat and clamping arrangement; the presence of a cylindrical hole supports secure fastening and repeatable positioning. These standardised dimensions simplify tool selection, minimise setup time and reduce the likelihood of mounting errors when replacing or rotating inserts. Improved chip control and surface quality for efficient turning A double-sided chipbreaker tailored to the T6215 grade promotes controlled chip formation and evacuation when machining rostfreier Stahl, aiding surface finish and reducing chip-related interruptions. The square shape provides multiple indexing positions, and the modest corner radius 1.2 mm balances strength with the ability to achieve good surface integrity. Where component tolerance and repeatable finish are critical, this insert improves process reliability and contributes to higher first-pass yield in serial production. For robust, repeatable turning of rostfreier Stahl request the Tungaloy SNMG120412 T6215 insert from Metav Werkzeuge or ask our consultants for assistance with holder compatibility and grade selection Technical data Article number: 6944764 SKU: 6944764-Tungaloy Manufacturer SKU: TUN6944764 Manufacturer: Tungaloy Facts Size: 12 mm Thickness: 4.76 mm Corner radius: 1.2 mm Cutting angle: 90° Clearance angle: 0° Hole: with cylindrical hole Special features ISO turning indexable insert Shape: square Grade/coating: T6215 (CVD-coated carbide) Material: Carbide Chipbreaker: double-sided Application: external and internal turning of rostfreier Stahl Compatibility determined by form, clearance, tolerance class, attachment, size and thickness FAQ Is this insert suitable for rostfreier Stahl? Yes. The SNMG120412 T6215 Tungaloy insert is a wear-resistant CVD-coated carbide grade optimised for turning rostfreier Stahl under stable to lightly interrupted conditions. What holder features are required for correct mounting? Compatibility requires a holder that matches the ISO SNMG 120412 seat geometry, tolerance class, fastening method and thickness; the insert’s cylindrical hole supports secure clamping for the Tungaloy SNMG120412 insert. Does the insert include a chipbreaker and what is its function? The insert has a double-sided chipbreaker to support controlled chip formation and evacuation, which enhances process stability and surface finish when machining rostfreier Stahl. Can the insert be indexed to use both sides? Yes. The double-sided design allows re‑indexing to present a fresh cutting edge, extending the serviceable life of each insert for the SNMG120412 T6215. What are the key geometry details to check before ordering? Verify the ISO SNMG 120412 format, square 12 mm size, 4.76 mm thickness, 1.2 mm corner radius, 0° clearance and the presence of a cylindrical hole to ensure proper seat fit and clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120412 T6215 Wendeplatten - Tungaloy
Benefit from the CVD-coated carbide grade T6215 and the ISO SNMG120412 form for consistently reliable turning of stainless steels; the double-sided chipbreaker and robust geometry reduce changeover frequency and improve overall process efficiency. Order the SNMG120412 T6215 insert directly via Metav Werkzeuge or ask our consultants if needed. SNMG 120412 T6215 Turning Insert by Tungaloy — CVD-coated carbide, 90° SNMG120412 T6215 is an ISO‑standard turning indexable insert for external and internal turning, designed for stable to lightly interrupted machining of stainless steels CVD-coated carbide grade T6215 ISO SNMG120412 indexable shape Suitable for stainless steels Double-sided chipbreaker with hole Extended tool life through wear-resistant coating and grade The CVD‑coated carbide composition and the selected T6215 grade combine to deliver improved wear resistance under typical turning conditions for stainless steels. The coating reduces flank and crater wear during extended cuts, which leads to longer intervals between tool changes and lower tooling costs per component. As a consequence of the hard coating and substrate pairing, the insert sustains cutting-edge integrity in stable setups, supporting predictable production runs and helping to maintain consistent part quality over time. Reliable chip control and surface quality for demanding materials The engineered double‑sided chipbreaker promotes repeatable chip formation and evacuation when machining stainless grades that tend to form continuous chips. Controlled chip flow reduces the risk of entanglement and secondary finishing, while the insert geometry contributes to a consistent surface finish on turned components. Where surface integrity is critical, the combination of the chip control feature and the CVD-coated surface assists in achieving controlled temperatures at the cutting zone and minimises chatter-related marks. ISO compatibility simplifies tool selection and integration Manufactured to ISO specifications for SNMG inserts, the design ensures compatibility with a wide range of standard external holders and boring bars; compatibility depends on shape, relief angle, tolerance class, clamping method, size and thickness. The presence of a cylindrical central hole and the standard square form facilitate secure clamping and straightforward replacement in toolholders, enabling rapid set‑ups and predictable positioning for repeatable geometry and tool offsets. Application guidance: where this insert performs best The insert is suited to both external and internal turning operations under stable to lightly interrupted cutting conditions. For optimal results, pair the grade and chipbreaker with a holder and clamping system matched to the workpiece rigidity and spindle power. The 90° main cutting edge orientation and the nominal corner radius support general turning profiles; selecting appropriate cutting data for stainless steels will further extend tool life and improve productivity. For specific cutting parameter recommendations, availability of the Tungaloy SNMG120412 T6215 insert, and tailored advice on holder compatibility, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6944798 Manufacturer SKU: TUN6944798 SKU: 6944798-Tungaloy Model series: ISO indexable turning inserts Facts Insert designation: SNMG120412 ISO code: 120412 Plate size: 12 mm Plate thickness: 4.76 mm Corner radius: 1.2 mm Relief angle: 0° Main edge angle: 90° Special features Material: carbide Coating: CVD‑coated Grade: T6215 Hole: with cylindrical hole Shape: square, double‑sided insert Chipbreaker: double-sided Typical application: turning of stainless steels; suitable for stable to light interrupted cuts FAQ What materials is this insert suited for? The SNMG120412 T6215 insert is specified primarily for machining stainless steels, with the T6215 grade developed for wear resistance under stable to lightly interrupted conditions. Is the insert compatible with standard SNMG holders? Yes, the insert follows ISO dimensions for SNMG120412 and will fit holders designed for SNMG geometry; ensure holder clamping type, thickness and tolerance class match the insert. How does the chipbreaker affect performance? The double‑sided chipbreaker on the insert improves chip formation and evacuation, supporting safer chip control and more consistent surface finishes during turning of challenging stainless materials. Can this insert be used for internal and external turning? The insert is suitable for both external and internal turning operations; choose a holder and cutting parameters that match the workpiece rigidity and machining conditions. What are the key dimensional references for setup? Important dimensions include a plate size of 12 mm, plate thickness of 4.76 mm and a corner radius of 1.2 mm; these determine seat fit and programme offsets. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com