SNMG 120412 T9225 Wendeplatten - Tungaloy
Combining the CVD‑coated carbide grade T9225 and a 1.2 mm corner radius provides a robust solution for medium to heavy steel turning; the ISO‑compliant SNMG120412 insert offers straightforward indexing and reliable chip control, so order the insert directly via Metav Werkzeuge or ask our consultants for application support. SNMG120412 T9225 – ISO turning insert (CVD‑coated carbide) by Tungaloy The SNMG120412 T9225 is a square, ISO‑conform indexable turning insert designed for external and internal turning in steel applications, offering a balance of toughness and wear resistance for interrupted or variable engagement cuts. ISO-compliant square insert for turning CVD-coated carbide T9225 for wear resistance 1.2 mm corner radius for robust edge strength Double-sided chipbreaker for controlled chips Stable performance for medium to heavy steel turning The SNMG120412 insert combines a CVD coating with a tough carbide substrate to extend tool life under demanding conditions. The coating increases resistance to abrasive wear while the substrate maintains edge integrity during variable engagement. As a result, this grade is particularly suitable for applications where cutting conditions change or where light interruptions occur; the mix of wear resistance and fracture toughness reduces the need for frequent index changes and supports a steadier production flow. Controlled chip formation and reliable edge life Equipped with a double-sided chipbreaker, the insert ensures consistent chip control in both external and internal turning, improving surface finish and evacuating swarf more predictably. The square geometry and two usable cutting edges per side permit quick indexing, lowering tool change downtime and improving process efficiency. The 1.2 mm corner radius reinforces the cutting edge, providing mechanical strength and better heat distribution at the cutting zone, which benefits longer uninterrupted cuts and roughing passes. Compatibility and system considerations for easy integration Compatibility to standard holders is determined by insert form, relief angle (0°), tolerance class, clamping method, size (12 mm) and thickness (4.76 mm). The insert's cylindrical hole and square shape suit ISO holders and adaptors intended for SNMG geometry; when pairing with a suitable external holder or boring bar, ensure matching dimensions and clamp fit to maintain repeatable accuracy. A complete assembly typically includes the ISO insert, an appropriate holder or boring bar, a backing/clamping set and replacement screws for fast servicing. Practical advantages for production and tool management Using a universal grade such as T9225 simplifies tool inventory—one insert handles a wide range of steels under varying conditions, reducing the number of specialised grades required. The CVD‑coated carbide and robust chip control promote consistent surface quality and predictable tool life, which supports planning for tool consumption and minimises unexpected downtime. For workshops aiming to balance productivity and cost‑effectiveness, this insert offers a pragmatic combination of durability and versatility. Contact Metav Werkzeuge for tailored advice on holder compatibility and to secure the SNMG120412 T9225 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss technical matching and ordering options Technical data Article number: 6796089 SKU: 6796089-Tungaloy Manufacturer SKU: TUN6796089 Manufacturer article number: 6796089 Model series: ISO-Drehwendeschneidplatten Numbers / Core technical data Size: 12 mm Thickness: 4.76 mm Corner radius: 1.2 mm Relief angle: 0° Included angle: 90° Designs / Special features Material: carbide Coating / Grade: T9225 (CVD‑coated) Chipbreaker: double-sided Hole style: cylindrical hole Shape: square Application: turning Compatibility: dependent on form, relief angle, tolerance, clamping, size and thickness FAQ What materials is this insert suitable for? The SNMG120412 T9225 insert is formulated as a robust universal grade for steel machining, particularly in medium to heavy turning operations where varying engagement or light interruptions occur. Is the insert suitable for interrupted cuts? Yes. The T9225 carbide grade offers enhanced toughness, and combined with the 1.2 mm corner radius it withstands slightly interrupted cuts better than harder, more brittle grades. How many cutting edges are available per insert? The square geometry with a double-sided chipbreaker provides multiple usable edges; each side can be indexed, which reduces tool change frequency and supports economical tool usage. What does the CVD coating contribute to performance? The CVD coating increases abrasive wear resistance and helps preserve the cutting edge at elevated temperatures, resulting in longer, more predictable insert life in production. Which holders are compatible with this geometry? Compatibility depends on matching the ISO‑conform geometry: form, relief angle (0°), size 12 mm, thickness 4.76 mm and clamping style. Use holders specified for SNMG inserts and verify fit before production. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120412 T9225 Wendeplatten - Tungaloy
Benefit from the combination of a CVD-coated carbide grade engineered for medium-to-heavy steel and a double-sided chipbreaker that promotes stable chip formation; the result is reliable, versatile performance in interrupted or varying cutting conditions — order directly via Metav Werkzeuge or consult the technical team for application support. SNMG120412 T9225 — Turning insert (ISO SNMG) by Tungaloy A SNMG120412 T9225 turning insert optimised for external and internal turning, offering a robust universal grade for changing engagement conditions and interrupted cuts. CVD-coated carbide for robust performance Universal T9225 grade for medium–heavy steel Double-sided chipbreaker for stable chip control ISO SNMG 120412, 12 mm square, 1.2 mm radius Increased productivity through a robust universal grade The T9225 grade is a CVD-coated carbide developed for productive steel machining where toughness and wear resistance must be balanced. In practical terms, this means fewer indexings and longer intervals between tool changes in mixed batches or semi-interrupted cuts. The CVD coating provides a wear-resistant surface layer that reduces flank wear at elevated temperatures, while the carbide substrate maintains edge integrity under variable loads. For shops seeking steady throughput, the combination of coating and substrate translates directly into improved uptime and predictable tool life. Geometry engineered for process stability The insert’s square plate design (ISO SNMG 120412) with a 1.2 mm corner radius and 0° relief angle contributes to stable cutting forces and consistent surface finish when the holder and workpiece are properly matched. The double-sided chipbreaker assists in breaking and evacuating chips across a range of feed rates, lowering the risk of built-up edge and workhardening. The presence of a cylindrical hole simplifies secure clamping in conventional indexable holders; however, compatibility is determined by holder form, tolerance class, fastening method, size and thickness, so matching to the intended clamping system is essential for repeatable results. System setup and selection guidance An effective cutting system comprises the indexable insert, a matching external holder or boring bar, and the appropriate shim/clamp set with replacement screws. The SNMG120412 T9225 insert is intended for use with ISO-standard holders sized for SNMG inserts; selecting the correct chipbreaker and grade should be based on the workpiece material, cutting parameters and machine rigidity. For less rigid setups or highly interrupted cuts the universal T9225 grade provides the added toughness required, while in lighter, high-speed applications a different grade might be preferable. Clear documentation of clamping torque and seating condition will improve repeatability and safety. Where this insert adds measurable value Suitable for job shops and production lines that machine a range of steels, this indexable plate reduces tooling complexity by covering medium-to-heavy operations with one robust grade. The item offers fast indexing due to its double-sided design, compact stock keeping thanks to the ISO form, and simplified logistics through compatible holder systems. The technical advantages—stable chip control, predictable wear and practical geometry—support a more efficient machining workflow and better process control in everyday turning operations. For reliable medium-to-heavy steel turning request the Tungaloy SNMG120412 T9225 insert from Metav Werkzeuge or contact the Metav Werkzeuge technical consultants for tailored application advice via info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 6781347 Manufacturer SKU: TUN6781347 SKU: 6781347-Tungaloy Material: Carbide (Hartmetall) Coating: CVD-coated carbide Model series: ISO turning indexable inserts Core dimensions Size: 12 mm Thickness: 4.76 mm Corner radius: 1.2 mm Relief angle: 0° Included angle: 90° Design and features ISO designation: SNMG120412 Grade: T9225 (robust universal) Chipbreaker: Double-sided Hole: With cylindrical hole Plate form: Square Intended use: Turning (external and internal) FAQ What materials is this insert suitable for? The Tungaloy SNMG120412 T9225 insert is specified for medium-to-heavy steel machining; the T9225 grade provides toughness for variable engagement and slightly interrupted cuts. How is the insert mounted in a holder? The insert features a cylindrical hole and square form for ISO SNMG holders; proper compatibility depends on holder form, tolerance class, fastening method, size and thickness and must be verified before use. When should the double-sided chipbreaker be chosen? A double-sided chipbreaker is advantageous where consistent chip control and longer indexing intervals are required, particularly in varied feeds or mixed-batch turning processes. Can the insert be used for finishing passes? Yes; with appropriate feeds and speeds the SNMG120412 plate can deliver a good surface finish, thanks to its geometry and the balanced properties of the T9225 grade. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120412 T9225 Wendeplatten - Tungaloy
The combination of a robust CVD-coated carbide grade T9225, a double-sided chipbreaker and ISO-standard dimensions ensures steady performance in medium to heavy steel turning; order genuine inserts from Metav Werkzeuge or consult the technical team for cutting data and holder compatibility. SNMG 120412 T9225 – SNMG turning insert by Tungaloy A SNMG120412 T9225 insert for versatile external and internal turning in medium to heavy steel applications. CVD-coated carbide grade T9225 Universal for medium to heavy steel machining Double-sided chipbreaker for reliable chip control ISO-standard square 12 mm size, 0° clearance Stable cutting performance for demanding steel turning The CVD-coated carbide construction of this insert delivers a balance of wear resistance and toughness appropriate for longer tool life under variable engagement. The T9225 grade is formulated as a robust universal sort for medium to heavy steel machining, which means the insert tolerates slightly interrupted cuts and changing engagement conditions without rapid flank wear. This results in more predictable tool changes and fewer scrap parts, supporting continuous, efficient production. Clear mounting standards and precise fit for secure clamping Compatibility with the holder is defined by form, clearance angle, tolerance class, fastening, size and thickness; the ISO-standard design simplifies procurement and interchangeability across ISO holders. The insert is square (12 mm) with a cylindrical hole, a corner radius of 1.2 mm and a thickness of 4.76 mm, and it presents a 0° clearance on the flank. These dimensions and the double-sided configuration permit safe seating in most ISO external holders and boring bars when the correct clamp and backing plate are used. Efficiency gains through design and edge economy A double-sided chipbreaker and the square geometry yield two usable cutting edges per side, lowering cost per edge and improving spindle uptime. The chip control provided by the chipbreaker reduces heat concentration at the cutting edge and promotes consistent surface finish when paired with appropriate feeds and depths of cut. Together, the carbide substrate and CVD coating provide stability in process windows where both wear resistance and edge toughness are required, leading to measurable throughput improvements in routine turning operations. Practical recommendations and application guidance Select the specific chipbreaker and grade variant to match workpiece stability, feed, and cutting depth; the robust universal T9225 grade is recommended where interrupted cuts or variable engagement occur. For secure performance, ensure the chosen holder matches the insert's ISO designation and thickness; replacement screws and a suitable backing plate complete the clamping system. Questions about optimal cutting parameters can be directed to Metav Werkzeuge for tailored recommendations and verified cutting data. Choose Tungaloy quality: order SNMG 120412 T9225 inserts from Metav Werkzeuge or contact our technical advisors for specification matching and cutting data. Technical data Article number: 6780829 Manufacturer: Tungaloy Manufacturer SKU: TUN6780829 Name: SNMG120412 T9225 Facts Size: 12 mm Thickness: 4.76 mm Corner radius: 1.2 mm Clearance angle: 0° Included hole: with hole Hole style: cylindrical hole Insert angle: 90° Special features Material: carbide (Hartmetall) Coating: CVD Grade: T9225 Chipbreaker: double-sided Plate form: square Series: ISO turning indexable inserts Typical application: turning (external and internal) FAQ Is this insert suitable for heavy interrupted cuts? The Tungaloy SNMG120412 T9225 insert is designed as a robust universal grade; the T9225 composition and the insert geometry make it appropriate for medium to heavy steel work and slightly interrupted cuts where toughness is required. Which holders are compatible with this ISO insert? Compatibility is determined by form, clearance angle, tolerance class, fastening, size and thickness; use ISO-standard holders sized for a 12 mm square SNMG-type insert and a 4.76 mm plate thickness for correct seating. How does the double-sided chipbreaker benefit machining? A double-sided chipbreaker offers reliable chip control on both indexed sides, improving surface finish consistency and extending edge economy by providing more usable edges per insert. What materials is the grade T9225 optimised for? The T9225 grade is optimised for steel machining, offering a balance of wear resistance and toughness suited to a wide range of steel alloys in medium to heavy turning. Can the insert be used for both external and internal turning? Yes, the square SNMG form and ISO standard make the insert suitable for both external and internal turning applications when paired with compatible external holders or boring bars. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120412 T9225 Wendeplatten - Tungaloy
Take advantage of a robust, CVD-coated T9225 grade combined with ISO SNMG geometry for stable chip control and long tool life; order directly via Metav Werkzeuge or consult our specialists for holder matching and availability. SNMG 120412 T9225 turning insert for turning – Tungaloy SNMG120412 T9225 is an ISO-compatible, CVD-coated cemented-carbide turning insert designed for medium to heavy steel turning and intermittent cuts ISO SNMG 120412 geometry, square form CVD-coated cemented carbide T9225 grade Robust for medium to heavy steel turning Double-sided chipbreaker, 0° clearance Consistent clamping and predictable cutting performance The ISO indexable geometry of this square insert ensures reliable positioning in standard holders and repeatable results in series production. The insert’s compatibility with a toolholder is defined by its form, clearance angle, tolerance class, attachment style, size and thickness; this predictability reduces setup time and simplifies tool management. The square form and central cylindrical hole support positive clamping and secure fixation, helping to maintain concentricity during external and internal turning operations. Grade and coating engineered for demanding steel turning The CVD-coated cemented-carbide grade T9225 is a universal, toughness-orientated sort developed for the mid to heavy end of steel machining. Its coating improves wear resistance while the substrate provides the required fracture toughness for slightly interrupted cuts and variable engagement conditions. As a result, the insert offers a balanced combination of chip control and edge stability, translating into longer in-process life and fewer unplanned indexings in production workflows. Practical handling that supports productivity and economy A double-sided chipbreaker and a 0° clearance design increase available cutting edges per insert, lowering tooling costs per component and enabling quick index changes. The rounded corner with a 1.2 mm radius helps distribute cutting forces and improves surface finish on general turning tasks. With a nominal plate size of 12 mm and a thickness of 4.76 mm, the insert fits common ISO plates and provides a compact solution where tool stiffness and fixture space are considerations. The result is a pragmatic insert that aids consistent cycle times and simplified logistics on the shop floor. For detailed holder compatibility, batch availability or to source original Tungaloy inserts with the SKU TUN6780898, contact Metav Werkzeuge for precise technical advice and prompt supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6780898 Manufacturer SKU: TUN6780898 Type designation: SNMG120412 Grade: T9225 Material: cemented carbide (CVD-coated) Shape: square Plate size: 12 mm Thickness: 4.76 mm Corner radius: 1.2 mm Hole: with hole (cylindrical hole) Clearance angle: 0° Numbers / Core technical data Angle: 90° Radius: 1.2 mm Thickness: 4.76 mm Plate size: 12 mm Manufacturer article number: 6780898 Designs / Special features Double-sided chipbreaker Square form indexable insert ISO-series turning insert Cylindrical hole for positive clamping Suitable for external and internal turning Robust universal grade for medium to heavy steel turning FAQ Is this insert suitable for interrupted cuts? Yes. The T9225 grade and its cemented-carbide substrate are formulated to provide extra toughness for slightly interrupted or variable engagement conditions with the SNMG120412 insert. What material is the cutting substrate and coating? The SNMG120412 insert uses a cemented-carbide substrate with a CVD-coated surface in the T9225 grade to improve wear resistance and edge life during steel turning. How many cutting edges are available per insert? This is a double-sided, square insert; each side provides multiple indexable edges, increasing cost efficiency per edge compared with single-sided options. Which toolholders are compatible with this insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness; the SNMG120412 geometry matches standard ISO SNMG holders with a cylindrical-hole clamping system. What are the key dimensions to check when selecting a holder? Verify plate size (12 mm), thickness (4.76 mm), corner radius (1.2 mm) and the presence of the cylindrical hole to ensure proper seating and secure clamping for the SNMG120412 insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120412 T9225 Wendeplatten - Tungaloy
Reliable performance from a CVD-coated carbide grade designed for medium to heavy steel turning. The combination of T9225 toughness and a 1.2 mm corner radius delivers steady cutting forces and predictable edge life for interrupted or variable engagement cuts. Order the SNMG120412 turning insert directly via Metav Werkzeuge or ask our consultants if needed. SNMG120412 T9225 Turning Insert – CVD-coated carbide, 1.2 mm radius (Tungaloy) SNMG120412 is a square, ISO‑format turning insert optimised for robust steel machining and compatible with standard SNMG holders CVD-coated carbide for steel machining Robust universal grade T9225 ISO SNMG120412 form for wide holder compatibility Double-sided chipbreaker for stable chip control Cylindrical hole, square 12 mm plate Engineered for reliable, repeatable metalcutting results The insert’s CVD-coated surface and carbide substrate are selected to balance wear resistance and toughness for demanding turning tasks. The T9225 grade is formulated as a universal, robust option for medium to heavy steel machining, especially where changing engagement or light interruptions occur. In production environments this combination reduces frequency of tool change and helps maintain steady cycle times, supporting predictable process planning and lower overall tooling cost. Stable cutting edge and improved process security A 1.2 mm corner radius and 4.76 mm plate thickness provide a reinforced cutting edge that tolerates higher cut depths and variable feeds without premature chipping. The double-sided chipbreaker delivers consistent chip formation on both index positions, aiding chip evacuation and surface finish while extending usable lifetime of each index. These design choices translate into fewer unplanned stops and more consistent part quality on turned components. Simple integration into ISO turning systems As an ISO‑format SNMG insert, this item integrates into common external and internal turning tool systems. Compatibility is determined by form, relief angle, tolerance class, fastening method, size and thickness; the square SNMG geometry and cylindrical hole suit many clamping concepts. A typical system consists of the insert, a matching external holder or boring bar, a shim/clamp set and the securing screw. Checking those parameters ensures correct seating, repeatable positioning and safe clamping during machining. Practical benefits for workshop workflows The design focusses on operational efficiency: robust edge geometry reduces rework, CVD-coated surfaces enhance abrasion resistance and the universal grade helps cover varying steel alloys with one insert type. Typical applications include external and internal turning where stability and chip control are required. For specification matching or process selection, consult technical guidance to choose the optimal chipbreaker and grade for the workpiece and machining conditions. For compatibility checks, technical guidance or to place an order for SNMG120412 inserts contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6966188 Manufacturer: Tungaloy Manufacturer SKU: TUN6966188 SKU: 6966188-Tungaloy Model designation: SNMG120412 Numbers Corner radius: 1.2 mm Thickness: 4.76 mm Plate size: 12 mm Included angle: 90° Relief angle: 0° Special features Material: Carbide (CVD-coated) Grade: T9225 Chipbreaker: double-sided Hole style: cylindrical hole Plate form: square Application: Turning (external and internal) ISO-compliant turning insert Suitable for medium to heavy steel machining FAQ Which holders fit this SNMG insert? The SNMG120412 insert fits holders that accept SNMG‑form inserts; compatibility depends on holder form, relief angle, tolerance class, fastening method, size and thickness. Check the holder specifications against the SNMG120412 dimensions and clamping style. What materials is the grade suitable for? The T9225 grade is a robust universal choice optimised for steel machining; SNMG120412 is recommended for medium to heavy steel turning where toughness and stable chip control are required. What does the T9225 designation indicate? T9225 denotes a CVD‑coated carbide grade tailored for productivity and reliable edge behaviour in tougher turning conditions; it balances wear resistance with fracture toughness for interrupted or variable cuts. Is the insert indexable on both sides? Yes, the double‑sided chipbreaker design allows the insert to be indexed to alternate faces, extending the effective tool life before replacement. How should the insert be mounted for secure clamping? Mount SNMG120412 in an SNMG‑compatible holder with the correct shim or clamp set and the matching securing screw; ensure clean seating and correct torque per the holder manufacturer’s instructions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120412 T9235 Wendeplatten - Tungaloy
Take advantage of a CVD-coated carbide grade optimised for steel and a double-sided chipbreaker that reduces tooling changes; the combination delivers robust performance for interrupted cuts and unstable setups. Order original Tungaloy inserts directly via Metav Werkzeuge or contact our consultants for application advice. SNMG 120412 T9235 square turning insert for turning — Tungaloy A SNMG120412 T9235 ISO-format square indexable insert designed for external and internal turning, offering a robust edge for interrupted cuts and unstable machining conditions CVD-coated carbide grade T9235 suited for steel Double-sided chipbreaker for versatile use Square 12 mm insert with 90° cutting angle 1.2 mm corner radius for a strong cutting edge Built for reliable cutting in unstable conditions The CVD-coated carbide grade T9235 provides a balance between toughness and wear resistance, making it well suited to steel machining at lower cutting speeds and in situations with interrupted cuts. The coating enhances edge life by resisting adhesion and abrasive wear, which contributes to fewer insert changes and more consistent cycle times. This combination of material and coating supports process stability when machine conditions are less rigid, translating into measurable improvements in uptime and tool-change frequency. Geometry that protects the edge and ensures versatility The square format together with a 90° cutting angle and a 1.2 mm corner radius yields a robust tool edge that tolerates heavier engagement and offers predictable chip flow. The insert is double-sided, effectively doubling indexable edges and reducing inventory turnover. A 4.76 mm plate thickness and a cylindrical hole ensure secure clamping in compatible holders, while the 0° rake angle supports controlled cutting forces in roughing passes. These geometric choices simplify tool selection for mixed turning tasks and help maintain dimensional accuracy across varying workpiece setups. ISO compatibility and system-level benefits As part of an ISO turning insert system, compatibility with the toolholder is determined by insert form, clearance angle, tolerance class, fastening method, size and thickness. Selecting the appropriate chipbreaker and grade for the workpiece and stability conditions optimises both surface finish and tool life. The indexable format supports fast reindexing and minimal downtime, improving productivity in batch production and repair jobs alike. If further matching of holder and insert is required, specialist advice is available by phone or email to ensure correct integration. If uncertain whether this insert matches a specific job, the data sheet and application notes help guide selection; alternatively, Metav Werkzeuge’s technical team is available to advise on holder compatibility, cutting parameters and grade selection. Contact details are provided below for direct consultation. Contact Metav Werkzeuge for tailored application advice or to secure original Tungaloy SNMG120412 T9235 inserts for your production Technical data Manufacturer article number: 6785947 SKU: 6785947-Tungaloy Manufacturer SKU: TUN6785947 Model series: ISO-Drehwendeschneidplatten Name: SNMG120412 T9235 Tungaloy insert Numerical data Insert size: 12 mm Thickness: 4.76 mm Corner radius: 1.2 mm Cutting angle: 90° Rake angle: 0° Design & features Material: CVD-coated carbide Grade: T9235 Chipbreaker: double-sided Hole: with hole, cylindrical hole Shape: square Application: Turning (external and internal) System compatibility: ISO-standard insert FAQ What materials is this insert optimised for? The T9235 grade is formulated for machining steel, particularly where low cutting speeds, interrupted cuts or unstable setups occur; the SNMG120412 T9235 insert benefits from the CVD coating for improved wear resistance. How is compatibility with toolholders determined? Compatibility depends on insert form, clearance angle, tolerance class, fastening method, size and thickness; the ISO designation indicates standardised dimensions for matching holders and clamping systems. Can this insert be used for internal turning as well as external turning? Yes — the square ISO insert is suitable for both external and internal turning operations when paired with an appropriate holder and clamping arrangement. What operational advantages does the double-sided chipbreaker provide? A double-sided chipbreaker extends usable edges per insert, reduces changeovers and offers flexibility in chip control across roughing and finishing operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120412 T9235 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated T9235 toughness, the SNMG 90° geometry and a 1.2 mm corner radius for secure turning under interrupted cuts; order directly via Metav Werkzeuge or consult our specialists for application support. SNMG 120412 T9235 turning insert by Tungaloy The SNMG120412 T9235 is an ISO-standard turning insert for external and internal turning, engineered for interrupted cuts and unstable machining conditions. SNMG ISO geometry for standardised clamping CVD-coated carbide grade T9235 for toughness 1.2 mm corner radius for durable cutting edges Double-sided chipbreaker for repeatable chip control Reliable cutting performance in unstable turning operations The insert’s core advantage lies in its CVD-coated carbide grade T9235, a formulation designed for toughness at lower cutting speeds and in interrupted cutting scenarios. This grade reduces the risk of premature edge chipping when machining steel under variable conditions and therefore supports longer tool life and fewer unscheduled tool changes. The result is a more predictable production rhythm and reduced downtime compared with uncoated or less resilient grades. Consistent surface finish and controlled chip formation The SNMG geometry combined with a double-sided chipbreaker promotes stable chip formation and repeatable surface quality. The square, 90° insert shape with a 1.2 mm corner radius balances edge strength and achievable detail on profiles, making it suitable where robust engagement and acceptable finish are both required. Explaining briefly: the chipbreaker’s form influences how chips curl and break away, so a matched chipbreaker helps maintain consistent forces on the tool and workpiece during variable or interrupted cuts. ISO compatibility for simple integration into turning systems As an ISO-standard turning insert, compatibility with a suitable external holder is defined by form, relief angle, tolerance class, fastening method, size and thickness. The insert’s 4.76 mm thickness, 12 mm size and cylindrical hole with clamping provision fit common ISO holders when the holder is selected to match these dimensions. Choosing the correct holder and clamping set ensures reliable seat, minimised vibration and repeatable geometry from edge to edge, which together improve process security and reproducibility in serial production. For reliable turning with Tungaloy’s T9235 grade, contact Metav Werkzeuge for tailored application advice and availability via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6786014 Manufacturer SKU: TUN6786014 Name: SNMG120412 T9235 Manufacturer: Tungaloy Core specifications Shape: square Size: 12 mm Thickness: 4.76 mm Corner radius: 1.2 mm Relief angle: 0° Hole: with cylindrical bore Chipbreaker: double-sided Insert angle: 90° Materials & features Material: carbide Coating: CVD Grade: T9235 Application: turning Suitable for interrupted cuts and unstable conditions ISO-standard insert series FAQ Which materials is this insert best suited for? The SNMG120412 T9235 insert is specified for machining steel, with the T9235 grade engineered for toughness under interrupted or unstable cutting conditions. What are the key dimensions and angles of the insert? Dimensions include a 12 mm size, 4.76 mm thickness and a 1.2 mm corner radius; the insert uses a 90° geometry and has a 0° relief angle with a cylindrical hole for clamping. Is a special holder required for mounting? The insert fits ISO holders that match the SNMG form, relief angle, tolerance class, fastening method, size and thickness; select a compatible external holder and clamping set for secure seating and repeatable performance. What coating and substrate are used on this grade? This grade is a CVD-coated carbide (T9235), combining a wear-resistant coating with a tough carbide substrate to withstand interrupted cuts at moderate speeds. How is chip control achieved with this insert? Chip control is supported by the double-sided chipbreaker; pairing the chipbreaker geometry with appropriate cutting data and a matched holder promotes predictable chip formation and surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120412 T9235 Wendeplatten - Tungaloy
CVD-coated carbide grade T9235 and a double-sided chipbreaker provide consistent performance in interrupted turning and unstable conditions while the ISO-compliant SNMG geometry ensures straightforward holder interchangeability. Order the SNMG120412 directly via Metav Werkzeuge or contact our consultants for advice on the optimal holder and clamping set. SNMG 120412 T9235 — Tungaloy SNMG120412 indexable insert for Turning SNMG120412 T9235 Tungaloy insert for versatile external and internal turning applications CVD-coated carbide for stable cutting Suitable for steel under interrupted cuts Double-sided chipbreaker for efficient chip control 90° square insert with 1.2 mm corner radius Reliable performance where stability is limited The CVD-coated substrate and the specified T9235 grade deliver a balance of toughness and wear resistance tailored to steel machining at lower cutting speeds and in conditions that cause intermittent cutting. The coating process deposits hard protective layers on the carbide body, which reduces flank wear and helps maintain a steady cutting edge under vibration or interrupted cuts. As a result, operators benefit from more predictable tool life and fewer unscheduled indexings, which contributes directly to improved process reliability and reduced cycle-time variability. Economy through double-sided usability and clear geometry The square SNMG form with a 90° included angle and double-sided chipbreaker means the insert can be indexed, offering economic use of the cutting geometry. The 1.2 mm corner radius provides strength at the cutting edge for robust contact with the workpiece while still allowing controllable cutting forces. These geometric choices reduce the need for frequent insert changes and simplify inventory: the same insert suits many turning tasks when paired with the correct holder and clamping set, lowering total machining cost per edge. Compatibility and mounting guidance for safer setup Compatibility with holders is determined by the insert form, clearance angle 0°, tolerance class, attachment method, size 12 mm, and thickness 4.76 mm. The SNMG120412 is designed as an ISO indexable insert, and the presence of a cylindrical hole supports secure clamping and consistent seating in many standard clamping systems. When selecting a seating system, match the insert’s form and thickness to the holder pocket and check the tolerance class to ensure correct running behaviour; this avoids poor contact, premature wear and inconsistent surface finish. How the chipbreaker and grade improve machining outcomes The double-sided chipbreaker is engineered to control chip formation across a range of depths of cut and feeds typical for steel turning. In practice this means safer chip evacuation, reduced tendency for built-up edge and improved surface quality in interrupted cuts. The T9235 grade is intentionally tougher than high-speed grades, which pays off when machining cast-offs, interrupted sections or operations with reduced rigidity: the trade-off towards toughness reduces edge chipping and maintains dimensional stability over longer runs. Practical considerations for workshop integration Use the insert with holders and clamping kits that conform to ISO standards for SNMG forms to exploit the full potential of the geometry. Inspect seating surfaces and clamping screws regularly and keep replacement screws and underlay sets available to maintain repeatable clamping force. For less-experienced operators, the ISO standardisation simplifies holder matching, and our technical advisers can provide guidance on selecting the optimal chipbreaker and cutting parameters for the material and machine rigidity at hand. For tailored holder recommendations, tooling packages or to order SNMG120412 T9235 inserts directly, contact Metav Werkzeuge — our consultants will advise on the correct holder, clamping sets and cutting parameters for the intended turning application. Technical data Article number: 6786020 Manufacturer SKU: TUN6786020 Marketplace SKU: 6786020-Tungaloy Manufacturer: Tungaloy Facts Corner radius: 1.2 mm Included angle: 90° Clearance angle: 0° Thickness: 4.76 mm Insert size: 12 mm Special features CVD-coated carbide Grade T9235 for steel, low cutting speeds Double-sided chipbreaker Cylindrical hole Square geometry, SNMG form ISO indexable insert FAQ What machining tasks is this insert best suited for? The SNMG120412 is intended for turning operations, particularly external and internal turning of steel where interrupted cuts or unstable conditions occur; the T9235 grade supports toughness at lower cutting speeds. How does the T9235 grade influence tool life and cutting behaviour? The T9235 CVD-coated carbide is formulated for toughness rather than maximal hardness, which reduces edge chipping under interrupted cutting and improves durability in unstable setups; this results in steadier tool life for demanding steel turning tasks. Which holder characteristics must match the insert? Holder compatibility depends on insert form, clearance angle 0°, tolerance class, attachment method, size and thickness; matching these parameters ensures correct seating and reliable clamping of the SNMG120412 in standard ISO pockets. What geometry features support robust cutting? Key features are the 90° included angle for general-purpose turning strength, the 1.2 mm corner radius for edge robustness, the 4.76 mm plate thickness for rigidity and the cylindrical hole for secure clamping. Is the insert indexable and reusable? Yes — the double-sided chipbreaker indicates the insert is designed for indexing; both sides of the insert provide usable cutting positions, enabling multiple reuses before disposal. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120412 T9235 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide grade optimised for steel, a robust corner radius for reliable edge life, and the ISO SNMG120412 format that simplifies holder compatibility; order directly via Metav Werkzeuge or contact our consultants for tailored advice. SNMG120412 T9235 Turning insert by Tungaloy A SNMG120412 T9235 ISO turning insert engineered for external and internal turning in steel, optimised for unstable cutting conditions and interrupted cuts. ISO SNMG120412 standard size CVD-coated carbide grade T9235 Double-sided chipbreaker for versatility Square insert with cylindrical hole Improved process reliability for interrupted turning The insert features a CVD-coated carbide composition in grade T9235, a formulation selected for toughness rather than top-end cutting speed. This makes the component particularly effective where machining stability is variable or where interrupted cuts occur. The tougher grade reduces catastrophic chipping and supports more consistent tool life, which in turn lowers machine downtime and the frequency of insert changes. Choosing a grade designed for demanding conditions directly translates into fewer unscheduled stops and steadier cycle times in serial production. ISO format and system compatibility to simplify tooling logistics The ISO designation ensures straightforward integration into established tool systems: the ISO SNMG120412 form, combined with a square plate and a cylindrical hole, fits standard SNMG pockets when the holder matches in form, clearance angle, tolerance class, fastening and thickness. The insert’s 0° clearance specification and 90° included angle are significant for selecting the correct external holder or boring bar. The standardised geometry reduces inventory complexity and supports quick changeovers between operations, helping to maintain throughput without extensive fixture modifications. Clear, measurable dimensions for reliable setup Key measurable values aid correct setup and predictable performance: 12 mm plate size, 4.76 mm thickness, and a 1.2 mm corner radius, together with a 90° included angle and a 0° clearance angle. The corner radius influences cutting stability and surface finish—a larger radius improves edge strength and dampens vibration but may increase cutting forces; the 1.2 mm radius here provides a balance between edge robustness and dimensional control. These values are useful when calculating approach angles, feed per tooth and when matching the insert to clamping elements or underlays. Durable design and application guidance for steel turning The double-sided chipbreaker and square form provide practical flexibility in production: the reversible plate extends usable cutting edges and the double-sided chipbreaker supports effective chip control when machining steel. The grade is optimised for lower cutting speeds and heavier interruptions; for stable, high-speed finishing applications, a different grade would normally be chosen. The insert is intended for both external and internal turning operations as part of a system comprising a compatible holder, underlay/clamp set and replacement screws. For complex or mixed-material batches, select the chipbreaker and grade to match the workpiece and the chosen cutting strategy. For reliable performance with the T9235 CVD-coated grade and to confirm holder compatibility, contact Metav Werkzeuge for expert guidance and availability at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6785887 Manufacturer SKU: TUN6785887 SKU: 6785887-Tungaloy Manufacturer: Tungaloy Core measurements Size: 12 mm Thickness: 4.76 mm Corner radius: 1.2 mm Included angle: 90° Clearance angle: 0° Special features and materials Grade: T9235 Cutting material: CVD-coated carbide Plate form: square Hole: with cylindrical hole Chipbreaker: double-sided Model series: ISO turning inserts Application: Turning FAQ What materials is this insert suitable for? The SNMG120412 T9235 insert is designed primarily for machining steel; the T9235 CVD-coated carbide is optimised for tougher conditions and interrupted cuts common in steel turning. How does the SNMG120412 insert mount into tooling? Compatibility depends on form, clearance angle, tolerance class, fastening, size and thickness; the plate’s square shape and cylindrical hole fit standard SNMG pockets when used with the appropriate holder, underlay and clamp set. What benefit does the 1.2 mm corner radius provide? A 1.2 mm corner radius increases edge strength and improves stability in interrupted or unstable cuts, reducing the likelihood of edge chipping and extending usable tool life. Is this insert reversible and suitable for internal turning? Yes, the square design with a double-sided chipbreaker provides reversible seating for multiple edges, and the geometry is suitable for both external and internal turning tasks. What distinguishes the T9235 grade from other grades? The T9235 grade is a tougher, CVD-coated carbide formulation intended for lower cutting speeds and unstable machining conditions; it emphasises reliable edge life and stable chip formation over maximum speed finish cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120412 T9235 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide performance, a 1.2 mm corner radius and a stable 90° geometry for reliable turning results in interrupted and unstable conditions; order through Metav Werkzeuge or request advice from our consultants for holder compatibility. SNMG120412 T9235 Tungaloy turning insert — 90° ISO indexable insert for turning SNMG120412 T9235 is an ISO‑format indexable turning insert designed for external and internal turning applications where interrupted cuts or unstable conditions demand a robust grade and repeatable clamping. CVD-coated carbide grade T9235 ISO SNMG120412 square insert, 90° geometry 1.2 mm corner radius for robust edge Double-sided chipbreaker, reversible use Consistent edge life for interrupted turning The CVD-coated carbide composition of the grade T9235 provides a combination of toughness and wear resistance specifically intended for steel machining at moderate cutting speeds. In practice this means improved resistance to chipping during interrupted cuts and reduced flank wear under less stable setups. The coating process yields a hard, heat-resistant surface that helps maintain the cutting edge, so component tolerances remain consistent over longer tool life. This results in fewer indexings and lower cumulative downtime on production runs. Geometry and dimensions that enhance process stability Built to the ISO SNMG120412 standard, the square shape with 90° geometry offers a positive balance between versatility and rigidity. The 1.2 mm corner radius forms a robust edge that absorbs shock at entry points, while the 4.76 mm thickness and square form ensure secure clamping in compatible holders. The presence of a cylindrical hole supports standard screw clamping systems, promoting repeatable positioning and concentricity. Together these factors reduce vibration and contribute to uniform surface finish and dimensional accuracy during turning. System guidance and selection for productive machining Compatibility with toolholders is determined by form, clearance angle, tolerance class, clamping method, size and thickness; select a holder matched to the insert’s profile to exploit the double-sided chipbreaker and reversible use. The chipbreaker style suits a wide range of steel turning operations and helps control chip flow in both external and internal cuts. For unstable set-ups or interrupted machining choose the T9235 grade and a rigid clamping arrangement to maximise productivity. Practical benefits include longer edge life, lower tooling costs per part and fewer tool changes, improving overall process efficiency. For application support or to reserve Tungaloy SNMG120412 T9235 inserts, contact Metav Werkzeuge for advice on holder compatibility and availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6785837 Manufacturer SKU: TUN6785837 Metav SKU: 6785837-Tungaloy Model series: ISO turning indexable inserts Material: carbide Grade/coating: T9235 (CVD-coated) Facts Insert designation: SNMG120412 Size: 12 mm Thickness: 4.76 mm Corner radius: 1.2 mm Geometry angle: 90° Clearance angle: 0° Hole: with cylindrical hole Special features Double-sided chipbreaker, reversible use Square insert, ISO SNMG form CVD-coated carbide grade for steel Designed for external and internal turning Suitable for interrupted and unstable cutting FAQ Which materials are suitable for this insert? The SNMG120412 T9235 insert is formulated for machining steel and performs well in operations involving interrupted cutting and less stable set-ups. How does the T9235 grade differ from general-purpose grades? Tungaloy’s T9235 is a tougher, CVD‑coated carbide grade aimed at improved resistance to chipping at moderate speeds, offering longer edge life in interrupted cuts compared with more wear‑focused grades. Is this insert reversible and how many cutting edges are available? Yes, the SNMG120412 insert features a double‑sided chipbreaker; the design provides multiple usable cutting edges before indexing is required. What holder characteristics are important for best results? A holder matched to ISO SNMG geometry with secure screw clamping and minimal overhang is recommended to exploit the insert’s 90° geometry and 1.2 mm corner radius for stable cutting. What is the manufacturer SKU and article number for ordering? The manufacturer SKU is TUN6785837 and the article number is 6785837 for the SNMG120412 T9235 indexable insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120412 T9235 Wendeplatten - Tungaloy
Take advantage of a tough T9235 CVD-coated carbide grade combined with a 1.2 mm corner radius and a square ISO geometry for reliable turning under interrupted or unstable cutting conditions; order the insert directly via Metav Werkzeuge or contact our consultants for application support. SNMG 120412 T9235 – Turning insert (ISO) by Tungaloy SNMG120412 T9235 is an ISO-standard indexable turning insert for external and internal turning applications, engineered for steel machining under interrupted cuts and unstable setups. CVD-coated carbide grade T9235 for steel Square ISO SNMG 12 mm insert with hole 1.2 mm corner radius for robust engagement Double-sided chipbreaker for interrupted cuts Reliable performance where stability is limited The SNMG120412 T9235 insert delivers a combination of toughness and wear resistance that suits lower cutting speeds and interrupted operations. The CVD-coated carbide construction provides a hard, wear-resistant surface while the underlying substrate maintains fracture resistance; this balance reduces the risk of edge chipping when the tool meets variable cuts or vibration. For workshops processing a range of steel components, the insert offers consistent productivity without frequent edge failures, supporting predictable cycle times and reduced rework. Material and coating explained for predictable tool life The insert is made from cemented carbide with a CVD coating, a proven pairing where abrasion resistance and edge integrity matter. The coating forms a protective ceramic layer that withstands abrasive wear, while the carbide core resists plastic deformation under load. In practical terms, this means longer periods between indexings and more stable surface finishes on steel workpieces. Choosing the T9235 grade prioritises durability in unstable cutting scenarios rather than maximising speed, so the grade works well for operations with intermittent cuts or limited fixture rigidity. System compatibility and mounting considerations As an ISO SNMG 120412 geometry, the plate is compatible with standard SNMG external holders and boring bars provided the holder matches form, clearance, tolerance class, fastening style, size and thickness. The insert features a cylindrical hole for secure clamping and a square plate form (12 mm) that gives four usable edges on a double-sided configuration. Ensure the holder’s seat and clamp interface accommodate the 4.76 mm plate thickness and the 0° clearance angle to achieve accurate seating and repeatable positioning during index changes. Practical guidance on selecting chipbreakers and grades The double-sided chipbreaker design aids controlled chip formation during interrupted cuts and contributes to reliable chip evacuation in semi-stable setups. When deciding on operating parameters, favour lower cutting speeds and moderate feed to exploit the toughness of the T9235 grade; this reduces shock loads on the cutting edge. For teams new to indexable plates, pairing the insert with a sturdy external holder and verifying clamp torque will help translate the material and geometry benefits into improved process reliability and reproducible surface quality. For machining tasks that demand a rugged, CVD-coated solution, choose the Tungaloy T9235 SNMG insert and contact Metav Werkzeuge for availability and technical advice by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6785886 Manufacturer SKU: TUN6785886 SKU: 6785886-Tungaloy Model series: ISO-Drehwendeschneidplatten Item name: SNMG120412 T9235 Tungaloy-Wendeplatte Facts ISO designation: SNMG120412 Plate size: 12 mm Plate thickness: 4.76 mm Corner radius: 1.2 mm Clearance angle: 0° Geometry angle: 90° Hole style: cylindrical hole Chipbreaker: double-sided Special features Material: cemented carbide Coating: CVD Grade: T9235 (tough grade for steel) Plate form: square Application: Turning Mounting: with hole for secure clamping FAQ What materials is this insert intended to machine? The SNMG120412 T9235 insert is formulated primarily for steel machining; the T9235 grade and CVD coating offer toughness and wear resistance suitable for interrupted and unstable cutting conditions. How does the chipbreaker benefit interrupted cuts? The double-sided chipbreaker on this insert promotes controlled chip formation and improved evacuation, which reduces the likelihood of re-cutting chips during interrupted turning cycles. Is the insert compatible with standard SNMG holders? Yes, the ISO SNMG 120412 geometry is designed for compatibility with SNMG external holders and boring bars provided the holder matches the plate size, thickness, hole and tolerance requirements. What thickness and hole style does the plate have? The plate is 4.76 mm thick and fitted with a cylindrical hole for positive and repeatable clamping in standard indexable insert holders. How should cutting parameters be adjusted for this grade? For the T9235 grade, favour moderate feeds and lower speeds compared with harder grades; this leverages the insert’s toughness and reduces edge chipping under variable cutting forces. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120412 T9235 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide and a 1.2 mm corner radius to maintain cutting stability in interrupted turning; the result is fewer insert changes and consistent part quality. Order or request application advice via Metav Werkzeuge to ensure the correct holder and chipbreaker match for reliable production. SNMG 120412 T9235 turning indexable insert by Tungaloy — CVD-coated carbide for steel, 90° square SNMG 120412 T9235 is an ISO-format indexable insert designed for external and internal turning where interrupted cuts and unstable conditions demand a robust grade. CVD-coated carbide grade T9235 Optimised for steel and interrupted cuts ISO SNMG 120412, 90° square form Double-sided chipbreaker with cylindrical hole Consistent cutting performance under interrupted conditions The CVD coating applied to the carbide substrate of this grade enhances wear resistance and reduces built-up edge during low-speed, interrupted cutting. The T9235 grade is formulated for steel machining and is particularly suited to operations where the cutting conditions are unstable or the cut is broken regularly; this leads to improved tool life and steadier cycle times. Chemical vapour deposition (CVD) creates a hard, adherent layer that helps maintain edge integrity and supports repeatable surface finish, which translates directly into economic advantages through fewer insert changes and reduced scrap rates. Straightforward integration into ISO tool systems Compatibility with tool holders is governed by insert form, clearance angle, tolerance class, fastening method, size and thickness. This ISO-format insert fits into standard indexing systems and forms a complete system together with an appropriate external holder or boring bar, a shim or clamp set and spare screws. The standardised interface simplifies tool inventory and reduces setup time, while the insert’s square geometry and cylindrical hole ensure secure mounting and predictable seating. Clear, measurable matching criteria remove ambiguity during tooling selection and support faster machine readiness. Geometry designed for robustness and surface quality The corner radius of 1.2 mm provides a balance between edge strength and achievable surface finish: a larger radius increases resistance to chipping and extends tool life, while the double-sided chipbreaker allows two usable cutting edges before indexing. The insert’s 0° clearance angle and 90° form deliver stable contact conditions for a predictable cutting force direction, aiding in dimensional control for both external and internal turning. These geometric choices mean fewer interruptions for replacement, more consistent part tolerances and a cleaner process flow on the shop floor. Contact Metav Werkzeuge to specify the SNMG 120412 T9235 insert and confirm the optimal holder and chipbreaker for the intended turning application Technical data Manufacturer article number: 6785992 SKU: 6785992-Tungaloy Designation: SNMG120412 T9235 Tungaloy indexable insert ISO designation: SNMG120412 Insert name: SNMG120412 T9235 Tungaloy-Wendeplatte Hole style: cylindrical hole Facts Corner radius: 1.2 mm Relief (clearance) angle: 0° Insert size: 12 mm Plate thickness: 4.76 mm Form / approach angle: 90° Special features Material: carbide Coating: CVD Grade: T9235 (tough for steel) Chipbreaker: double-sided Shape: square Application: turning (external and internal) System composition: ISO insert, holder or boring bar, shim/clamp set and spare screws FAQ What materials is this insert best suited for? The SNMG120412 T9235 insert is optimised for steel machining; the T9235 carbide grade and CVD coating provide toughness and wear resistance suited to interrupted cuts in steel. How does the 1.2 mm corner radius affect performance? A 1.2 mm corner radius increases edge strength and resilience against chipping, which extends the service life of the SNMG120412 T9235 insert and contributes to steadier surface finish results. Can the insert be used for both internal and external turning? Yes, the ISO SNMG geometry and the square form make the insert suitable for both external and internal turning when paired with the correct holder or boring bar. How many cutting edges are available before indexing? The insert is double-sided with a chipbreaker design, offering two indexable cutting edges per side according to the insert orientation and seating, thereby delivering multiple usable edges before replacement. How is compatibility with a toolholder determined? Compatibility is determined by insert form, clearance angle, tolerance class, fastening style, size and thickness; matching these parameters ensures secure seating of the SNMG120412 T9235 insert in the chosen holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120412 TH10 Wendeplatten - Tungaloy
Benefit from the combination of a sharp TH10 uncoated carbide cutting edge, a 1.2 mm corner radius and a double‑sided chipbreaker for reliable, low‑force turning of non‑ferrous materials; order directly via Metav Werkzeuge or request application advice from their consultants. SNMG120412 TH10 SNMG 120412 ISO turning insert for turning — Tungaloy The SNMG120412 TH10 is an ISO‑standard square turning insert designed for external and internal turning, optimised for non‑ferrous materials and applications requiring low cutting forces and clean surface finishes. ISO SNMG120412 format TH10 uncoated carbide grade 1.2 mm corner radius Double-sided chipbreaker with cylindrical hole Consistent cutting with low forces and clean finishes The SNMG120412 insert combines a TH10 uncoated carbide composition with a geometry that promotes low cutting forces and clean surfaces. The sharp, uncoated edge is intended for materials where minimal built‑up edge formation and reduced cutting resistance are decisive, such as aluminium alloys and softer non‑ferrous alloys. As a result, machining feeds can remain productive while surface integrity is preserved, translating into fewer secondary operations and a more predictable process chain. Secure clamping and simple integration into ISO systems Designed to ISO dimensions, the insert’s ISO compatibility ensures straightforward pairing with standard holders; compatibility depends on form, 0° relief angle, tolerance class, fastening and the insert’s 4.76 mm thickness. The square shape with a 1.2 mm corner radius and the cylindrical locating hole provide repeatable seating and secure clamping, which reduces vibration and improves tool life. Clear interface dimensions make selection and inventory management easier in industrial environments. Productivity gains and robust handling for turning operations A double-sided chipbreaker and reversible geometry make this insert cost‑effective in production: both sides can be utilised before replacement, doubling the available cutting edges and reducing tool change frequency. The combination of uncoated carbide and a purpose‑matched chipbreaking form supports stable swarf control and consistent performance across batches, contributing to higher throughput and lower overall operating costs. For teams seeking dependable results in turning operations, this insert offers a balance between cutting stability and surface quality. For tailored specification and to secure SNMG120412 TH10 inserts from Tungaloy for efficient turning operations, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for application advice and stock availability. Technical Data Article number: 6806804 Manufacturer SKU: TUN6806804 SKU: 6806804-Tungaloy Manufacturer: Tungaloy Model series: ISO turning inserts Label: SNMG120412 TH10 Tungaloy insert Core technical data Corner radius: 1.2 mm Relief angle: 0° Thickness: 4.76 mm Inscribed circle / size: 12 mm Included hole: cylindrical Insert angle: 90° Special features Material: uncoated carbide Grade: TH10 Double-sided chipbreaker Square insert shape Suitable for external and internal turning Compatibility: ISO holders determined by form, relief, tolerance, fastening, size and thickness FAQ Is this insert suitable for steel machining? This insert is specified as a sharp, TH10 uncoated carbide grade for non‑ferrous and low‑force applications; for steel machining, a different grade and chipbreaker would be recommended. How many cutting edges are available per insert? The SNMG120412 TH10 insert is double‑sided and reversible, providing two usable cutting edges before replacement. Which holders are compatible with this ISO insert? Compatibility is achieved with holders matching the ISO SNMG120412 geometry — matching form, relief, tolerance class, fastening, size and thickness ensures correct seating and clamping. What surface finish can be expected with this grade? The uncoated carbide and sharp cutting edge support clean surface finishes on non‑ferrous materials when cutting parameters are set to suit the workpiece and machine stiffness. What is the manufacturer SKU for ordering and traceability? The manufacturer SKU for this Tungaloy insert is TUN6806804 (Article number 6806804). Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120416 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide grade engineered for rostfreier Stahl and a robust 90° geometry to secure consistent component quality and predictable tool life; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. SNMG120416 AH6225 Tungaloy indexable insert for turning SNMG120416 AH6225 is an ISO‑standard indexable insert for external and internal turning, designed for medium machining of rostfreier Stahl. PVD-coated carbide grade AH6225 Optimised for rostfreier Stahl machining Square insert with 90° cutting angle Double-sided chipbreaker, cylindrical hole Consistent performance with a universal cutting grade The SNMG120416 AH6225 insert combines a PVD coating with a carbide substrate to balance edge sharpness and wear resistance for medium‑duty turning of rostfreier Stahl. The coating lowers adhesion and improves heat resistance, which translates into steadier cutting forces and more consistent surface finishes under varying cutting conditions. For production environments where material batches and machine stability can fluctuate, this insert offers predictable tool behaviour and simpler process windows, reducing the need for continuous parameter fine‑tuning. System compatibility that simplifies tool planning As an ISO series indexable insert, the plate’s compatibility with toolholders depends on shape, relief angle, tolerance class, attachment style, size and thickness. The squared form with a 90° included angle and a cylindrical hole makes mechanical clamping straightforward on standard external holders and boring bars, while the 4.76 mm plate thickness contributes to bending stiffness. Specifying the correct holder, shim and clamping set ensures repeatable clamping accuracy and minimises vibration, which in turn protects the cutting edge and extends usable life per edge. Improved chip control for steady productivity The double‑sided chipbreaker design provides reliable chip segmentation during both external and internal turning, helping to avoid long, entangling swarf and reducing cycle interruptions. The 1.6 mm corner radius increases edge robustness for interrupted cuts and moderate depth of cut, offering a compromise between edge strength and dimensional control. In practical terms, workshops achieve fewer tool changes and more uninterrupted spindle time, which contributes to higher throughput and lower unit production cost. Practical benefits for workshop workflows Using a universal, PVD‑coated carbide grade streamlines inventory: one grade covers a wide range of rostfreier Stahl applications, lowering the number of tool types stocked. The ISO format facilitates quick index changes; a double‑sided insert delivers two cutting edges per index, improving cost efficiency. Clear identification of form, size and tolerance reduces setup times and helps maintain machining quality across shifts and operators, supporting predictable delivery performance for batch and single‑piece manufacturing. Contact Metav Werkzeuge for tailored application advice or to secure the SNMG120416 AH6225 insert for your turning operations; technical consultants are available to review holder compatibility and cutting data to optimise process stability. Technical data Article number: 6947333 Manufacturer SKU: TUN6947333 SKU: 6947333-Tungaloy Model series: ISO‑Drehwendeschneidplatten Designation: SNMG120416 AH6225 Tungaloy‑Wendeplatte Facts Corner radius: 1.6 mm Included angle: 90° Plate thickness: 4.76 mm Plate size: 12 mm Hole: with cylindrical hole Special features Carbide substrate, PVD‑coated Grade AH6225, universal for rostfreier Stahl Square plate geometry, double‑sided chipbreaker Intended application: turning (external and internal) ISO‑standard insert for compatibility with ISO holders FAQ What materials is this insert suited for? The SNMG120416 AH6225 insert is optimised for machining rostfreier Stahl and performs well in medium turning operations where a balance of edge sharpness and stability is required. Is the insert reversible or single‑use per face? This is a double‑sided indexable insert; each indexing provides a fresh cutting edge, improving cost efficiency and reducing tool change frequency. How does the PVD coating benefit machining? The PVD coating on the carbide substrate reduces adhesion from rostfreier Stahl, raises thermal resistance and helps maintain edge integrity under variable cutting conditions, resulting in steadier cut quality. Which holders are compatible with this insert? Compatibility depends on holder form, relief angle, tolerance class, attachment and size. The ISO designation and cylindrical hole allow use with standard external holders and appropriate boring bars when matched to the insert dimensions. What cutting scenarios suit the 1.6 mm corner radius? A 1.6 mm corner radius provides enhanced edge strength for interrupted cuts and moderate depths of cut while still allowing acceptable dimensional accuracy; it is a pragmatic choice for general‑purpose rostfreier Stahl turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120416 AH6225 Wendeplatten - Tungaloy
Benefit from a versatile, PVD‑coated carbide grade that combines a sharp, stable cutting edge with reliable performance for stainless steel turning; the 90° square geometry and 1.6 mm corner radius support stable chip control and predictable tool life. Order the SNMG120416 AH6225 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. SNMG120416 AH6225 ISO indexable turning insert by Tungaloy — PVD‑coated carbide, 90° square geometry The SNMG120416 AH6225 is an ISO‑standard indexable turning insert engineered for external and internal turning, optimised for machining stainless steels under variable conditions. PVD-coated carbide grade AH6225 1.6 mm corner radius for robustness ISO SNMG120416 square insert, 90° geometry Double-sided chipbreaker, with cylindrical hole High‑performance grade for stainless steel turning The AH6225 grade is a PVD‑coated carbide developed as a universal solution for stainless steels, offering a balance between a sharp cutting edge and edge stability under changing cutting conditions. This combination reduces built‑up edge and improves surface finish while maintaining acceptable tool life during medium‑duty operations. The coating supports consistent wear behaviour, which translates into fewer unscheduled index changes and more predictable machining cycles — a clear advantage where process reliability and throughput matter. Geometry and compatibility that reduce setup time The square SNMG120416 geometry with a 90° approach and a 1.6 mm corner radius provides strong support in radial cuts and simple programming for facing and profiling operations. The insert is double‑sided and features a cylindrical hole for positive clamping; compatibility with holders depends on form, clearance angle, tolerance class, fastening method, size and thickness. The 4.76 mm thickness and ISO dimensions ensure straightforward replacement in standard external holders and boring bars, enabling rapid changeovers and lower tooling inventory complexity. Practical system approach for predictable results Used as part of a complete system — insert, matching external holder or boring bar, shim/clamp set and replacement screws — this insert is intended to deliver stable chip formation and good surface integrity. The double‑sided chipbreaker offers symmetric cutting edges that help maintain chip control when machining long or interrupted cuts. For best results, select the chipbreaker style and grade according to workpiece stability and cutting parameters; this approach minimises tool wear and optimises cycle times for batch and single‑piece production alike. For precision‑orientated stainless steel turning, request the Tungaloy SNMG120416 AH6225 from Metav Werkzeuge and consult our team for matching holders or application advice — email info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 6947307 Manufacturer SKU: TUN6947307 Metav SKU: 6947307-Tungaloy Designation: SNMG120416 AH6225 Tungaloy insert Facts Corner radius: 1.6 mm Thickness: 4.76 mm Inscribed circle/size: 12 mm Lead/approach angle: 90° Clearance angle (free angle): 0° Designs / Special features PVD‑coated carbide grade AH6225 Double‑sided chipbreaker Square insert with cylindrical hole ISO indexable turning geometry (SNMG) For external and internal turning of stainless steels FAQ What materials is this insert intended for? The AH6225 grade is formulated for machining stainless steels; it provides a balance of sharpness and edge stability for medium machining tasks. Is the SNMG120416 compatible with standard ISO holders? Yes, the SNMG120416 follows ISO dimensions; compatibility depends on holder form, clearance angle, tolerance class, fastening and thickness — matching the insert to a suitable external holder or boring bar is recommended. How does the 1.6 mm corner radius affect performance? A 1.6 mm corner radius increases edge strength for more robust cuts while still allowing good surface finish; it is suitable for general turning where a balance of strength and finish is required. How many usable cutting edges are available per insert? The indexable SNMG is double‑sided, offering multiple cutting edges before indexing; the exact number of operations depends on cutting conditions and workpiece material. Which chipbreaker should be chosen for long turning operations? For longer, continuous cuts in stainless steels, select the chipbreaker that supports stable, segmented chip formation; the double‑sided chipbreaker on this insert provides improved chip control in many turning scenarios. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNMG 120416 AH6225 Wendeplatten - Tungaloy
Take advantage of a PVD-coated carbide grade that combines a sharp yet stable cutting edge with a 1.6 mm corner radius and a 90° geometry to secure consistent results in turning operations; order the insert directly via Metav Werkzeuge or consult our advisors for application-specific selection. SNMG120416 AH6225 Tungaloy turning insert — square 90°, PVD-coated carbide The SNMG120416 AH6225 is an ISO-standard square indexable insert intended for external and internal turning, optimised for machining rostfreier Stahl in medium cutting conditions. ISO square insert SNMG120416 AH6225 PVD-coated carbide for wear resistance 1.6 mm corner radius for repeatable edge stability Double-sided chipbreaker with cylindrical hole Increased productivity through a balanced grade and geometry The AH6225 grade is a PVD-coated carbide designed to provide a balance between edge sharpness and robustness for medium turning tasks. The combination of a sharp cutting edge and a controlled micro-geometry reduces built-up edge when machining rostfreier Stahl, while the surface coating improves wear resistance and heat management. PVD coating stands for a thin, hard layer applied in a vacuum process that enhances surface hardness and reduces friction; this translates into more consistent component finish and fewer tool changes, supporting a smoother production flow and predictable cycle times. Simple integration into ISO tool systems for fast changeover Being part of the ISO-standard turning insert family, the square SNMG120416 format and the central cylindrical hole ensure compatibility with a wide range of external holders and boring bars when matched by form, clearance angle and tolerance class. The insert is double-sided, offering economical indexability and straightforward reversal when one edge is worn. With a plate thickness of 4.76 mm and a visible 90° corner contact, setup is fast and repeatable; the cylindrical hole gives reliable clamping, reducing the risk of movement under cutting loads and enabling stable tool life. Stable surface quality and controlled chip formation under varying conditions The 1.6 mm corner radius supports a dependable surface finish while absorbing moderate cutting forces—ideal for finishing and general turning cycles. The double-sided chipbreaker assists in fragmenting chips consistently across changes in feed or material variations, which reduces the likelihood of entanglement and improves process safety. For shops facing variable batch sizes or mixed rostfreier Stahl alloys, this insert grade delivers repeatable performance and less process variance, contributing to uptime and quality assurance. For application advice tailored to Tungaloy’s AH6225 grade and to arrange fast delivery through Metav Werkzeuge, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6947314 SKU: 6947314-Tungaloy Manufacturer article number: 6947314 Manufacturer: Tungaloy Dimensions & measurable data Corner radius: 1.6 mm Thickness: 4.76 mm Size: 12 mm Geometry angle: 90° Relief/clearance angle: 0° Materials & features Material: carbide Coating / grade: AH6225 (PVD-coated) Shape: square Hole: with cylindrical hole Chipbreaker: double-sided Model series: ISO turning indexable inserts Application: turning FAQ What materials is this insert suitable for? The SNMG120416 AH6225 insert is formulated for machining rostfreier Stahl; the AH6225 PVD-coated carbide provides a good compromise between sharpness and wear resistance for a range of stainless alloys. How does the 1.6 mm corner radius affect part finish? A 1.6 mm corner radius increases edge stability and supports a consistent surface finish while allowing for modest cutting depths, making it suitable for finishing and general turning tasks. Is the insert reversible and economical to use? Yes—this is a double-sided indexable insert; both edges can be used, which extends tool life per insert and reduces tooling costs per component. Which holders are compatible with SNMG120416 inserts? Compatibility depends on holder form, clamping style, clearance angle and tolerance class; the ISO-standard format and cylindrical hole of this insert allow fitting into common external holders and boring bars when those parameters match. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120416 AH8015 Wendeplatten - Tungaloy
Benefit from a balanced combination of PVD-coated AH8015 carbide and a 1.6 mm corner radius for reliable edge stability and consistent performance in the machining of heat‑resistant alloys; the square, double‑sided ISO geometry also reduces tooling costs through indexability. Order the inserts directly via Metav Werkzeuge or consult the technical team for holder compatibility and process optimisation. SNMG 120416 AH8015 – ISO turning insert for external and internal turning by Tungaloy SNMG120416 AH8015 is a square ISO turning insert engineered for external and internal turning of heat‑resistant alloys, providing a robust balance between wear resistance and cutting‑edge stability. PVD-coated carbide AH8015 for heat-resistant alloys Square SNMG form with 90° cutting angle 1.6 mm corner radius for reliable edge strength Double-sided insert with cylindrical hole for secure clamping Increased process reliability through optimised grade and coating The combination of a PVD-coated surface and the AH8015 substrate targets extended tool life when tackling heat‑resistant alloys. The coating reduces abrasive wear and thermal softening at the cutting edge, which translates into longer continuous running times and fewer index changes. For production environments where consistent component tolerance and surface quality matter, this insert offers a predictable wear behaviour and contributes to reduced overall machining costs through fewer tool changes and less downtime. Stable cutting performance and sensible geometry for demanding cuts The square SNMG geometry with a 90° cutting angle and a 1.6 mm corner radius provides a stable support zone at the insert tip, assisting in shoulder turning and robust interrupted cuts. A larger corner radius increases edge strength and helps maintain dimensional accuracy under higher feed or interrupted conditions. The double‑sided design doubles the available cutting edges, improving cost‑efficiency per edge without compromising on repeatability or surface finish. Practical compatibility and setup guidance for straightforward integration Compatibility with toolholders is determined by insert form, clearance angle, tolerance class, clamping method, size and thickness; the insert’s cylindrical hole ensures secure mechanical locating in commonly used clamping systems. The tool system comprises the indexable insert, a matching outer holder or boring bar, shim/clamp set and replacement screws. Application engineers can advise on selecting the appropriate chipbreaker and grade depending on workpiece stability and feed‑cut conditions, helping to achieve the best compromise between tool life and productivity. Operational benefits and selection advice for production shops Using a PVD‑coated carbide grade that is tailored for high temperatures results in less frequent regrinding and a lower rate of scrap caused by edge failure. The grade’s balance between wear resistance and edge toughness makes it suitable as a general‑purpose choice for many heat‑resistant alloys. When choosing a chipbreaker and insert variant, prioritise stability of the setup: a rigid holder and correct clamping reduce vibration, extend insert life and improve surface finish, delivering measurable gains in throughput and process stability. For high‑temperature alloy turning select the Tungaloy SNMG 120416 AH8015 insert and contact Metav Werkzeuge for tailored holder compatibility and application recommendations via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6947315 Manufacturer SKU: TUN6947315 Model series: ISO turning inserts Designation: SNMG120416 AH8015 Material: Hartmetall Shape: square Insert thickness: 4.76 mm Insert size: 12 mm Hole: with cylindrical hole Cutting angle: 90° Facts Corner radius: 1.6 mm ISO code: 120416 Double-sided: yes Chipbreaker: double-sided Tolerance relevance: form, clearance, tolerance class affect compatibility Special features PVD-coated carbide (AH8015) Optimised for heat-resistant alloys Suitable for external and internal turning System components: insert, outer holder or boring bar, shim/clamp set, replacement screws Secure clamping via cylindrical hole Square geometry for 90° shoulder operations FAQ What materials is this insert designed for? The SNMG120416 AH8015 insert by Tungaloy is crafted for the general machining of heat‑resistant alloys, offering a balance of wear resistance and edge stability suitable for such workpiece materials. How does the 1.6 mm corner radius affect performance? A 1.6 mm corner radius increases edge strength, improves dimensional stability in heavier cuts and interrupted machining, and helps maintain surface quality under load. Is the insert reversible and how many cutting edges are available? The insert is double‑sided, providing multiple indexable cutting edges and improving cost efficiency per insert compared with single‑edged alternatives. Which chipbreaker should be selected for best results? Selection of the chipbreaker depends on the workpiece alloy, feed and depth of cut; for heat‑resistant materials a chipbreaker matching the stability of the setup is recommended—Metav Werkzeuge can advise on the optimal choice. What must be checked for holder compatibility? Holder compatibility is governed by insert form, clearance angle, tolerance class, clamping method, size and thickness; ensure the holder matches the SNMG form and the cylindrical hole locating system. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNMG 120416 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD‑coated carbide, a double‑sided chipbreaker and ISO‑standard geometry for reliable turning of heat‑resistant alloys; order original Tungaloy inserts directly via Metav Werkzeuge or request advice from our consultants for optimal tool selection. SNMG 120416 AH8015 SNMG Turning insert — PVD‑coated carbide, 90° square (Tungaloy) A SNMG120416 AH8015 turning insert for ISO‑standard external and internal turning, optimised for the general machining of heat‑resistant alloys and designed for stable cutting performance. ISO‑standard SNMG geometry PVD‑coated carbide for wear resistance Double‑sided chipbreaker, economical use 90° square form with 1.6 mm radius Increased process reliability for demanding materials The PVD‑coated carbide grade offers a balanced combination of wear resistance and cutting‑edge stability, which translates into longer tool life and fewer interruptions in production. As an ISO‑conforming square insert, the plate geometry ensures predictable engagement and repeatable clearance when paired with matching holders. The 0° clearance angle and the 90° corner orientation are specified to provide robust support under radial loads; the 1.6 mm corner radius reduces notch formation and helps maintain a consistent surface finish on heat‑resistant alloys. Efficient chip control and economical indexing A double‑sided chipbreaker and symmetric construct permit economical use of all available edges while keeping chip formation compact and manageable. The insert is supplied with a cylindrical hole for secure fastening to a range of ISO‑compatible toolholders; compatibility is governed by form, free angle, tolerance class, fastening method, size and thickness. Choosing the correct chipbreaker profile and the AH8015 grade supports stable cutting when facing or turning interrupted surfaces and contributes to reduced cycle times through reliable chip evacuation. Practical selection and repeatable performance in production The PVD layer on the AH8015 grade reduces built‑up edge and improves heat resistance, making this insert a practical first choice for the general machining of heat‑resistant alloys where a compromise between abrasion resistance and edge strength is required. The plate thickness of 4.76 mm and the square format deliver rigidity for both finishing and light roughing operations; indexability and straightforward re‑clamping simplify logistics on the shop floor. For matching the insert to a specific application, select the cutting geometry and holder combination that correspond to the ISO designation and the intended stock material. Contact Metav Werkzeuge today to confirm suitability of the Tungaloy SNMG120416 AH8015 turning insert for the planned operation or to arrange immediate supply through Metav Werkzeuge. Technical data Article number: 6947308 SKU: 6947308-Tungaloy Manufacturer SKU: TUN6947308 Model series: ISO‑Drehwendeschneidplatten Facts Geometry: SNMG 120416 Corner radius: 1.6 mm Plate size: 12 mm Plate thickness: 4.76 mm Clearance angle: 0° Included hole style: cylindrical Included angle: 90° Special features PVD‑coated carbide Grade: AH8015 Double‑sided chipbreaker Square plate form ISO‑standard insert for turning Intended for heat‑resistant alloys Compatibility depends on holder form, free angle, tolerance class, fastening, size and thickness FAQ What materials is this insert intended for? The SNMG120416 AH8015 insert from Tungaloy is specified as a first choice for the general machining of heat‑resistant alloys, with a coating and grade balanced for wear resistance and edge stability. Does the insert fit standard toolholders? Compatibility with toolholders is determined by the SNMG form, clearance angle, tolerance class, fastening method, size and thickness; the SNMG120416 geometry and cylindrical hole are designed for ISO‑compatible holders and clamping sets. How does the double‑sided design affect usage? The double‑sided chipbreaker provides multiple indexable edges and economical reuse; the design keeps chip form compact and supports consistent performance across indexed edges. Is the insert coated and what benefits does the coating bring? Yes — the insert is a PVD‑coated carbide grade (AH8015); the coating improves heat resistance, reduces built‑up edge and extends tool life in demanding turning operations. What are the key dimensional features to check before mounting? Check the plate size of 12 mm, plate thickness of 4.76 mm, corner radius of 1.6 mm and the 90° square form to ensure correct seating and clearance in the chosen holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNMG 120416 AH8015 Wendeplatten - Tungaloy
Benefit from a balanced combination of wear resistance and edge stability thanks to the PVD-coated cemented carbide grade and a 1.6 mm corner radius for consistent performance in turning operations; order the SNMG120416 AH8015 Tungaloy insert directly via Metav Werkzeuge or consult our advisors for application support. SNMG 120416 AH8015 Tungaloy turning insert (ISO 120416) — PVD-coated cemented carbide, 1.6 mm radius SNMG120416 AH8015 is an ISO‑standard indexable turning insert designed for general turning of heat‑resistant alloys, offering a robust PVD coating and geometry suited to reliable chip control and long tool life PVD-coated cemented carbide grade AH8015 1.6 mm corner radius for robust edge strength Double-sided chipbreaker for versatile turning ISO SNMG120416 with 90° lead angle Precision cutting that raises productivity The SNMG family geometry ensures stable engagement and predictable cutting behaviour; the PVD-coated layer on the cemented carbide substrate reduces abrasive and adhesive wear, which translates into longer production intervals between indexings and fewer tool changes. For the workshop, that means improved spindle utilisation and reduced downtime. The combination of coating and substrate was selected to balance wear resistance and edge stability, particularly when machining thermo‑resistant alloys where temperature and built‑up edge present a constant challenge. Material compatibility and machining benefits This grade is optimised as a first choice for general machining of heat‑resistant alloys: the microstructure and surface finish of the coating enhance abrasion protection while maintaining a sharp cutting edge for consistent surface finishes. The insert’s double-sided chipbreaker assists chip formation and evacuation, reducing the risk of built‑up edge and improving process security. When paired with appropriate cutting parameters, the result is a reliable mix of machining speed and component quality. Practical integration with existing turning systems Compatibility with a toolholder depends on form, clearance angle, tolerance class, fastening, size and thickness — the insert is supplied in the ISO SNMG format and integrates into standard external holders or boring bars when the matching clamping set and screws are used. The insert features a cylindrical hole for positive seating and a 4.76 mm thickness that contributes to stiffness in the cutting zone. For users evaluating tooling combinations, this system approach simplifies selection and reduces the need for bespoke set‑ups. Efficiency, cost control and process stability By combining a tried‑and‑tested geometry with a modern PVD coating, the insert supports higher process reliability and predictable tool life — factors that improve cost per part over production runs. The modest 1.6 mm corner radius provides a compromise between edge strength and the ability to achieve tight tolerances, while the square form and 90° lead angle facilitate shoulder turning and general external operations. These elements together help maintain consistent quality across batches and minimise scrap rates. For productive and process‑secure turning with Tungaloy’s AH8015 grade, contact Metav Werkzeuge for application advice and availability via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6947334 Manufacturer SKU: TUN6947334 ISO designation: SNMG120416 Grade: AH8015 Facts Size: 12 mm Thickness: 4.76 mm Corner radius: 1.6 mm Clearance angle: 0° Lead/approach angle: 90° Special features Shape: square Hole: cylindrical hole Chipbreaker: double-sided Coating: PVD Material: cemented carbide Application: turning of heat‑resistant alloys System: ISO turning insert series FAQ Is this insert suitable for turning heat‑resistant alloys? Yes. The SNMG120416 AH8015 Tungaloy turning insert is specified for general machining of heat‑resistant alloys, with a PVD‑coated cemented carbide grade chosen to balance wear resistance and edge stability. Which holders are compatible with this SNMG insert? Compatibility is determined by form, clearance angle, tolerance class, fastening, size and thickness; the insert fits ISO SNMG120416 holders and requires the matching clamping set and screws for secure mounting. What does the AH8015 grade provide in practice? AH8015 is a PVD‑coated cemented carbide grade optimised for general applications on heat‑resistant materials, offering a compromise between abrasive wear protection and stable cutting edges to extend tool life. How is the insert mounted and supported in a tool system? The insert uses a cylindrical hole for positive seating and is designed to be used with a suitable external holder or boring bar plus a support/locking set and replacement screws as required by the ISO system. What machining benefits does the double‑sided chipbreaker deliver? The double‑sided chipbreaker promotes controlled chip formation and evacuation, improving process security and surface quality while increasing versatility across different turning tasks. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNMG 120416 T5105 Wendeplatten - Tungaloy
Take advantage of high cutting performance and predictable tool life through the combination of a CVD-coated carbide grade and ISO compatibility; the insert delivers consistent chip control and reliable integration into ISO tool systems. Order the SNMG120416 T5105 directly via Metav Werkzeuge or consult the technical team for application-specific advice. SNMG 120416 T5105 turning indexable insert by Tungaloy — CVD-coated carbide for high-speed cast iron The SNMG120416 T5105 is a CVD-coated carbide indexable insert designed for external and internal turning, optimised for high-speed machining of cast iron under stable set-ups. ISO SNMG geometry for broad holder compatibility CVD-coated carbide grade T5105 for high-speed Double-sided chipbreaker for consistent chip control 90° square form with 1.6 mm corner radius Consistent productivity for demanding turning tasks The CVD-coated carbide grade T5105 provides a balance of wear resistance and thermal stability that supports longer tool life in continuous production runs. In stable machining conditions, the combination of the coating technology and the substrate hardness reduces flank wear and diminishes edge chipping, which in turn lowers tool-change frequency and contributes to predictable machining costs. This makes the insert particularly suited for serial turning operations where repeatable performance is essential. Reliable chip control and improved surface quality A double-sided chipbreaker engineered for chip fragmentation ensures steady chip evacuation and reduces the risk of built-up edge on the cutting zone. Improved chip formation directly supports a more uniform surface finish and reduces machining interruptions. The chip control geometry is effective when matched to the workpiece material and cutting data, enabling finer control over chip shape during high-speed cast iron turning and helping to maintain consistent part quality. Seamless integration into ISO tool systems The ISO SNMG form and the standardised dimensions facilitate straightforward integration with compatible external holders and boring bars. Key measures such as the 12 mm plate size, 4.76 mm thickness and the 1.6 mm corner radius combine to give a robust cutting edge while preserving flexibility in holder selection. The insert’s cylindrical hole supports secure clamping and reduces play in the assembly, which helps maintain concentricity and repeatable tool positioning in commercial turning centres. Practical application guidance for safe, efficient use Designed for turning applications, the insert performs best with a stable machine set-up, correct holder support and cutting data aligned to cast iron properties. Selection of the appropriate chipbreaker and cutting conditions is important: when processed under the recommended parameters, the insert reduces downtime and improves process reliability. The system build-up typically includes the indexable insert, a suitable external holder or boring bar, a shim/clamping set and replacement screws for secure fixation and quick replacement. Contact Metav Werkzeuge for matched tooling solutions and request the SNMG120416 T5105 insert (SKU TUN6852992) for efficient high-speed cast iron turning; technical advisors are available at info@metav-werkezeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6852992 Manufacturer SKU: TUN6852992 Model series: ISO-Drehwendeschneidplatten Designation: SNMG120416 Grade: T5105 Material: Hartmetall Manufacturer: Tungaloy Core measurements Plate size: 12 mm Plate thickness: 4.76 mm Corner radius: 1.6 mm Relief angle: 0° Cutting angle: 90° Hole: with hole Hole style: cylindrical Special features CVD-coated carbide grade T5105 Double-sided chipbreaker ISO SNMG square form Suitable for external and internal turning Optimised for high-speed cast iron machining in stable conditions System assembly: insert, external holder or boring bar, shim/clamp set, replacement screws FAQ Is this insert suitable for machining cast iron? The SNMG120416 T5105 insert is optimised for high-speed machining of cast iron; the CVD-coated carbide grade T5105 offers wear resistance suited to stable turning applications. Can this insert be used for internal turning operations? Yes, the SNMG120416 T5105 indexable insert can be used for both external and internal turning when paired with an appropriate boring bar or internal holder that matches the insert form and size. How does the double-sided design affect usable edges? The double-sided chipbreaker extends the number of indexable edges available on the SNMG120416 T5105 insert, permitting re-indexing to present a fresh cutting edge and thereby improving utilisation. What determines holder compatibility for this insert? Compatibility is determined by the insert form, relief angle, tolerance class, fastening method, plate size and thickness; the ISO SNMG geometry of this insert supports broad holder choice when these parameters align. Does the hole style influence clamping stability? The cylindrical hole and the 4.76 mm plate thickness ensure positive clamping and stable fixation of the SNMG120416 T5105 insert, contributing to repeatable positioning and reduced vibration. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120416 T5115 Wendeplatten - Tungaloy
Combining the CVD‑coated carbide T5115, a 1.6 mm corner radius and a robust double‑sided chipbreaker yields steady, predictable machining of cast iron; order directly via Metav Werkzeuge or consult our specialists for application matching and stock information. SNMG 120416 T5115 — Turning insert (Drehen) by Tungaloy A SNMG120416 T5115 ISO turning insert designed for ISO‑compatible external and internal turning, optimised for reliable performance in cast iron applications. SNMG 120416 ISO geometry CVD-coated carbide T5115 grade Double-sided chipbreaker for cast iron Square insert with cylindrical hole Consistent wear resistance for cast iron turning The CVD‑coated carbide grade T5115 combines balanced wear resistance and edge stability, giving a reliable compromise between life and toughness for cast iron. This universality reduces the need for frequent grade changes when switching between roughing and finishing passes. The coating enhances thermal and abrasive resistance, resulting in consistent surface quality and predictable tool life under typical turning conditions. ISO compatibility and secure clamping for stable cuts Built to ISO dimensions, the insert’s square geometry and central cylindrical hole ensure positive seating in holders that match form, clearance angle, tolerance class, fastening, size and thickness. The nominal dimensions 12 mm and 4.76 mm thickness combined with a 0° clearance mean straightforward integration into standard holders and predictable repeatability. The secure clamp reduces chatter and helps maintain dimensional accuracy across batches. Geometry and chip control that improve productivity The 1.6 mm radius at the corner increases edge strength for interrupted cuts and supports stable engagement during heavier passes. The double‑sided chipbreaker promotes controlled chip formation specifically for cast iron, helping evacuate swarf efficiently and reducing secondary operations. Together, these features contribute to higher process reliability and lower scrap rates in serial production. Practical handling and operational benefits As an ISO‑standard insert, the SNMG120416 T5115 is easy to index and replace, supporting fast tool changes and minimal machining downtime. The carbide substrate provides rigidity for sustained cutting performance, while the CVD layer protects against abrasive wear. Specification and traceability are clear via the SKU and manufacturer references, assisting in inventory management and reordering for continuous operation. For application advice, availability or to order the Tungaloy SNMG120416 T5115 insert, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for expert guidance and fast processing. Technical data Article number: 6850270 SKU: 6850270-Tungaloy Manufacturer SKU: TUN6850270 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Grade / Coating: T5115 / CVD-coated Numbers / Core technical data Size: 12 mm Thickness: 4.76 mm Corner radius: 1.6 mm Clearance angle: 0° Angle: 90° Designs / Special features Square plate form (quadratisch) With hole — cylindrical hole (mit Loch, zylindrisches Loch) Double-sided chipbreaker (doppelseitig) Intended application: Drehen (external and internal turning) FAQ Is this insert suitable for machining cast iron? Yes. The SNMG120416 T5115 insert from Tungaloy (SKU 6850270-Tungaloy) is a universal grade formulated for cast iron, offering balanced wear resistance and edge stability. Which toolholders are compatible with this ISO plate? Compatibility requires a holder matching ISO form, clearance angle, tolerance class, fastening, size and thickness; the SNMG120416 geometry and cylindrical hole support standard ISO turning holders. What are the key dimensions to check when selecting a holder? Key measurements are 12 mm size, 4.76 mm thickness, 1.6 mm corner radius and 0° clearance; these determine fit and seating in the clamping system. Does the insert have a coating and what is its benefit? Yes — the insert uses a CVD‑coated carbide grade T5115, which improves resistance to abrasive wear and supports consistent cutting performance in cast iron. Can the insert be used for both external and internal turning operations? Yes. The design and ISO conformity of the SNMG120416 T5115 enable use in both external and internal turning when paired with the appropriate holder and machining parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120416 T5115 Wendeplatten - Tungaloy
The Tungaloy SNMG120416 T5115 insert combines CVD-coated carbide with a universal grade optimised for cast iron and a 1.6 mm nose radius, delivering reliable wear resistance and edge stability for turning operations; order the SNMG120416 T5115 Tungaloy indexable insert directly via Metav Werkzeuge or ask our consultants if needed. SNMG120416 T5115 SNMG indexable insert for turning — Tungaloy SNMG120416 T5115 is a square ISO indexable insert designed for external and internal turning, offering a universal CVD-coated carbide grade for reliable performance on cast iron. CVD-coated carbide for wear resistance Universal grade for cast iron machining Square 90° shape for versatile turning Double-sided chipbreaker for controlled chips Durable grade for efficient cast-iron turning The supplied insert is a CVD-coated carbide grade (T5115) developed as a universal solution for machining cast iron. The coating provides improved wear resistance while the carbide substrate maintains a stable cutting edge, which together reduce tool change frequency and support consistent cycle times. This combination benefits production lines where predictable tool life and repeatable results are required. The universal nature of the grade balances toughness and hardness, making it suitable for varied roughing and finishing tasks without excessive compromise. Precise geometry and fit for ISO tooling systems The geometry follows ISO conventions for square turning inserts and the form, clearance, tolerance class, fastening style, size and thickness determine holder compatibility. The insert features a 90° lead angle and a 0° clearance angle, with a plate thickness of 4.76 mm and a nominal size of 12 mm, so matching the correct external holder or boring bar is essential to achieve intended chip flow and cutting forces. Cylindrical hole mounting ensures reliable clamping; correct seating and torque prevent vibration and extend service intervals. Compatibility notes: check holder pocket shape and screw type against the ISO designation. Optimised chip control and edge stability A double-sided chipbreaker is integrated to manage chips across a range of depths of cut and feed rates. The chipformer design combined with the T5115 grade assists in producing shorter, manageable chips when turning cast iron, reducing secondary operations and improving surface quality. The insert’s 1.6 mm nose radius provides a compromise between strength and finish: it increases edge robustness for interrupted cuts while allowing good surface results in finishing passes when the setup is rigid and cutting parameters are optimised. Process guidance for consistent performance For best results, select a holder and machining parameters that match the insert’s geometry and the workpiece material: stable clamping and adequate rigidity maximise edge life and dimensional accuracy. The indexable design permits rotation to fresh cutting edges, reducing tooling costs per component. Where high material removal rates are required, combine the insert with a suitably rigid toolholder and adjust feed to maintain the chipbreaker’s effectiveness. For fine finishes, reduce feed and use the nose radius to improve surface integrity while preserving tool life. Contact Metav Werkzeuge for specification advice and availability of the Tungaloy SNMG120416 T5115 insert; call +49 2822 7131930 or email info@metav-werkzeuge.com for tailored recommendations. Technical data Article number: 6852993-Tungaloy Manufacturer article number: 6852993 Manufacturer SKU: TUN6852993 Model series: ISO indexable turning inserts ISO designation: SNMG120416 Core specifications Size: 12 mm Thickness: 4.76 mm Nose radius: 1.6 mm Lead angle: 90° Clearance angle: 0° Hole: cylindrical Design & special features Material: carbide Grade/coating: T5115 (CVD-coated) Chipbreaker: double-sided Plate form: square Application: turning FAQ What materials is this insert suitable for? The Tungaloy SNMG120416 T5115 insert is a universal grade specifically intended for machining cast iron and delivers a balanced mix of wear resistance and edge stability for turning operations. How is the insert mounted and how to ensure compatibility? Compatibility depends on holder pocket form, clearance, tolerance, fastening and thickness; the SNMG120416 uses a cylindrical-hole clamping system—verify the holder matches the ISO form and screw type. What advantages does the T5115 CVD coating offer? The T5115 CVD-coated carbide provides improved wear resistance and maintains a stable cutting edge under typical cast-iron turning conditions, extending tool life and supporting consistent part quality. Can this insert be used for both roughing and finishing? Yes, the universal nature of the grade and the 1.6 mm nose radius allow adaptable use across roughing and finishing tasks, provided the machine setup offers sufficient rigidity and the cutting parameters are tuned. How does the chipbreaker affect machining? The double-sided chipbreaker promotes controlled chip formation across a range of feeds and depths, aiding safe chip evacuation and reducing interruptions in automated production. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120416 T5125 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide grade, a 1.6 mm corner radius and a double-sided chipbreaker to maintain stable chip control in interrupted turning operations. Order the SNMG120416 T5125 directly via Metav Werkzeuge or ask our consultants if needed. SNMG120416 T5125 SNMG indexable insert for turning by Tungaloy — CVD-coated carbide, 1.6 mm radius A SNMG120416 T5125 indexable turning insert designed for robust performance on cast iron and for interrupted cutting where stability is limited. CVD-coated carbide for improved wear resistance Optimised for interrupted cuts in cast iron Double-sided chipbreaker for consistent chips Square ISO plate with cylindrical hole Reliable chip control for interrupted turning operations The insert offers consistent chip control through a double-sided chipbreaker, which helps to stabilise the cutting process during intermittent cuts. The combination of the T5125 CVD coating and the carbide substrate provides a wear-resistant cutting face that extends edge life under fluctuating cutting forces. For shops that face frequent tool changes due to interrupted cuts or less rigid set-ups, this configuration reduces downtime and contributes to a more predictable tool life. The text focuses on measurable production gains rather than marketing claims, presenting performance benefits that support process planning. Mounting and compatibility explained for easy integration Designed to the ISO plate family, the square plate format and the cylindrical central hole ensure compatibility with a wide range of ISO-indexable holders. The ISO code and form determine fit by shape, clearance angle, tolerance class, fixation and thickness; this plate uses a 0° clearance angle and conforms to the ISO geometry expectations for SNMG types. Clarifying these mounting aspects simplifies selection: the insert fits standard external holders or boring bars that accept SNMG120416 plates, making tool inventory management straightforward and efficient. Material and coating — why the T5125 grade matters The T5125 grade is a tougher CVD-coated carbide developed for cast iron applications and for conditions with interrupted cuts or limited stability. CVD (chemical vapour deposition) applies a hard, even coating that improves oxidation resistance and edge strength at elevated cutting temperatures; the underlying carbide substrate provides the fracture resistance needed in interrupted machining. This balance means fewer edge failures and more reliable component quality in forming, finishing and semi-finishing operations on cast iron. Practical benefits and process suggestions With a 1.6 mm corner radius, the insert provides a compromise between edge strength and surface finish — suitable for light stock removal and common finishing passes where a rounded corner increases robustness. The square, double-sided design doubles the number of available cutting edges per plate, helping to lower tooling cost per edge in serial production. For best results, select a matching chipbreaker and holder rigidity appropriate to the workpiece and process; standard ISO tolerances ensure reproducible clamping and positioning across tool changes. Discuss application options and availability with Metav Werkzeuge to align batch supply and cutting parameters for the SNMG120416 T5125. Technical data Article number: 6850271 Manufacturer SKU: TUN6850271 Brand: Tungaloy Material: carbide Coating: CVD Facts Plate designation: SNMG120416 Corner radius: 1.6 mm Plate thickness: 4.76 mm Plate size: 12 mm Clearance angle: 0° Insert angle: 90° Hole: with cylindrical hole Manufacturer article number: 6850271 Special features Grade: T5125, tougher CVD-coated carbide Double-sided chipbreaker Square plate form, ISO standard Suitable for turning (Drehen) applications Optimised for cast iron and interrupted cuts Compatible with ISO holders and clamping sets FAQ What materials is this insert best suited for? The SNMG120416 T5125 insert is optimised for cast iron and for situations with interrupted cutting; the T5125 grade offers toughness and good edge stability. Is this plate reversible and how many cutting edges are available? This square, double-sided insert provides multiple cutting edges per plate, extending service intervals and lowering cost per edge. Does the SNMG120416 require a special holder geometry? No special holder is required beyond standard ISO-compatible SNMG holders; fit depends on plate form, thickness and hole style. How does the CVD coating affect cutting performance? The CVD coating on the T5125 grade improves wear and oxidation resistance at higher temperatures while the carbide core provides impact resistance for interrupted cuts. What is the corner radius and how does it influence the finish? The insert has a 1.6 mm corner radius, which increases edge robustness and is suitable for many finishing and light roughing operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120416 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide wear resistance, precise ISO compatibility and a chip-controlling geometry for reliable turning of stainless steels; order the insert directly via Metav Werkzeuge or ask our consultants for application advice. SNMG120416 T6215 Turning insert — Tungaloy indexable insert for turning A SNMG120416 T6215 indexable turning insert optimised for machining stainless steels under stable to lightly interrupted cutting conditions. CVD-coated carbide for high wear resistance Suitable for machining stainless steels Double-sided insert with integrated chipbreaker Square form with 90° included angle Consistent performance for stainless steel turning The T6215 carbide grade combines a durable CVD coating with a substrate engineered for abrasive resistance, which delivers consistent tool life when machining stainless steels. The result is fewer tool changes and more predictable production cycles, supporting higher productivity in batch runs. As an indexable insert, the design enables quick rotation to a fresh cutting edge, reducing downtime and maintaining dimensional stability across multiple parts. This stability benefits process planning and lowers the effective cost per part in sustained production. ISO compatibility for straightforward tool set-up Produced to ISO dimensions, the insert is compatible with a wide range of external holders and boring bars when matched for form, relief angle and tolerance class. Correct selection of holder and clamping components ensures reliable clamping and repeatable positioning, which is essential for precision turning and minimised set-up time. For workshops with mixed tool inventories, adherence to ISO makes integration simple: the insert can be mounted, replaced and indexed without bespoke fixtures, improving shop-floor flexibility. Geometry that improves stability and chip control A square plate with a 90° included angle and a double-sided chipbreaker offers a balance of rigidity and controlled chip formation. The corner radius of 1.6 mm helps to distribute cutting forces for steady cutting and better surface finish, while the chipbridge design guides chips away from the cutting zone to prevent re-cutting. These geometric traits reduce chatter risk and contribute to consistent part quality, especially when turning components that demand close dimensional tolerance and good surface integrity. Practical guidance for selection and system build-up This insert is intended for turning applications and performs best under stable to lightly interrupted cutting regimes; select the specific chipbreaker and grade to match the workpiece material and process stability. A typical system comprises the indexable plate, a compatible external holder or boring bar, a shim/clamp set and spare fastening screws — ensuring safe retention and straightforward replacement. For challenging materials or mixed-operation shops, pairing the insert with a robust holder and correct cutting data will maximise component quality and tool life. Contact Metav Werkzeuge for tailored application advice on the Tungaloy SNMG120416 T6215 indexable insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6944786 Manufacturer SKU: TUN6944786 SKU: 6944786-Tungaloy Brand: Tungaloy Type designation: SNMG120416 Numbers / Core technical data Plate size: 12 mm Plate thickness: 4.76 mm Corner radius: 1.6 mm Relief angle: 0° Included angle: 90° Mounting: with hole (cylindrical) Special features / Versions Material: carbide Coating / grade: T6215 (CVD coating) Plate form: square Chipbreaker: double-sided Application: turning ISO series: ISO turning indexable inserts FAQ What materials is this insert best suited for? The SNMG120416 T6215 insert from Tungaloy is designed primarily for machining stainless steels and provides enhanced wear resistance in such applications. Is the SNMG120416 compatible with standard ISO holders? Yes, the plate follows ISO dimensions and is compatible with holders and boring bars matched for form, relief angle and tolerance class. How does the chipbreaker benefit machining performance? The double-sided chipbreaker on the SNMG120416 promotes controlled chip formation and evacuation, improving surface finish and reducing the risk of re-cutting chips. Can the insert be rotated to use multiple cutting edges? The square, double-sided design allows indexing to fresh cutting edges, extending the usable life of each insert before disposal. What should be included in the tool system for safe operation? A proper tool system for this insert comprises a compatible holder or boring bar, shim/clamp set and correct fastening screws to ensure reliable clamping and repeatable positioning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com