7755718-Tungaloy

7755719-Tungaloy

ACMT 060308 AH120 Wendeplatten - Tungaloy

Take advantage of the wear-resistant AH120 grade, precise 0.8 mm nose radius and robust parallelogram geometry for stable milling and consistent part quality; order directly via Metav Werkzeuge or consult our specialists for matching with existing Tungaloy milling bodies. ACMT 060308 AH120 indexable insert for milling — PVD-coated carbide, 0.8 mm radius (Tungaloy) The ACMT060308 AH120 indexable cutting insert is designed for use in Tungaloy milling systems and suited to face, shoulder, slot, high-feed and contour milling where a sharp cutting edge and process security are required. PVD-coated carbide AH120 for wear resistance 0.8 mm nose radius for precise corner control Parallelogram form with 85° cutting engagement Cylindrical hole with 40°–60° single countersink Higher process security through wear-resistant grade and coating The insert’s AH120 grade, combined with a PVD-coated cemented carbide substrate, delivers consistent flank life and resistance to chipping under interrupted cuts. This engineered combination reduces flank wear and maintains a sharp edge for longer, which translates into fewer index changes and improved uptime. Explained for clarity: a PVD coating forms a thin, hard surface layer that reduces adhesion and abrasion, while the carbide body supplies toughness; together they support predictable tool life and repeatable component tolerances. Geometry that improves dimensional control and chip evacuation A parallelogram shape and an 85° cutting engagement angle help to control entry conditions and distribute cutting forces evenly across the insert, reducing vibration risk. The 0.8 mm corner radius balances edge strength and finish quality, enabling sharper corners than larger radii while still resisting fracture. The insert’s single-sided chipbreaker and the cylindrical hole with a one-sided countersink (40°–60°) assist in guided chip formation and secure clamping on the milling body; the result is improved surface finish and stable chip flow in a variety of steels and non-ferrous materials. Broad application spectrum and system compatibility Intended for milling applications, the insert is compatible with Tungaloy milling systems provided that seat geometry and clip location match the cutter body. Typical uses include planing of large faces, shoulder operations, slotting and high-feed passes depending on the chosen cutter family. The insert’s 3.18 mm thickness and standard size designation ensure mechanical stability in modern milling bodies. For mixed production runs the combination of a wear-resistant grade and reliable clamping yields predictable performance across batches, supporting leaner tool inventories and fewer process interruptions. Contact Metav Werkzeuge for availability and technical matching of Tungaloy ACMT 060308 AH120 indexable inserts; specialists can advise on the correct cutter body and application parameters (info@metav-werkzeuge.com, +49 2822 7131930) Technical data Article number: 6816605 SKU: 6816605-Tungaloy Manufacturer SKU: TUN6816605 Brand: Tungaloy Model series: Fräswendeschneidplatten Core specifications ISO designation: 060308 Size designation: 06 Thickness: 3.18 mm Nose radius: 0.8 mm Cutting engagement angle: 85° Relief angle: 7° Special features PVD-coated cemented carbide Grade AH120, wear- and chipping-resistant Parallelogram plate form Cylindrical hole with single-sided countersink (40°–60°) Single-sided chipbreaker Suitable for milling: face, shoulder, slot, high-feed, contour FAQ What materials is this insert suited for? The ACMT 060308 AH120 insert is a PVD-coated cemented carbide grade engineered for a broad material range and offers particular strength in demanding steel machining where wear resistance and edge security are required. How does the chipbreaker affect performance? The single-sided chipbreaker on the ACMT insert promotes controlled chip formation and evacuation, which stabilises cutting forces and contributes to consistent surface finish in milling operations. Is the insert compatible with non-Tungaloy milling bodies? Compatibility requires matching the seat geometry and clamping system; the insert’s ISO designation and dimensions must be confirmed against the cutter body before use to ensure secure fastening and correct engagement. What are the locking and hole features of the insert? The insert is supplied with a cylindrical hole and a one-sided countersink (40°–60°), designed to allow positive clamping and repeatable seating in compatible milling bodies. How does the 0.8 mm radius influence machining results? A 0.8 mm nose radius balances corner strength and edge definition, helping to achieve finer surface finishes and accurate corner radii while maintaining resistance to chipping under moderate interruption. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.

ACMT 060308 AH140 Wendeplatten - Tungaloy

Take advantage of a PVD-coated, wear- and chipping‑resistant carbide grade together with a controlled chipformer and secure clamping geometry for steady milling performance. The combination of a 0.8 mm corner radius and a parallelogram form ensures reliable edge life and process stability; order the ACMT060308 AH140 insert directly via Metav Werkzeuge or consult our specialists for application matching. ACMT060308 AH140 indexable insert for milling by Tungaloy — PVD-coated, one-sided chipbreaker The ACMT060308 AH140 indexable insert is intended for milling applications where a sharp cutting edge and process security are required; compatible units must match insert seat, geometry and milling body. PVD-coated carbide for high wear resistance One-sided chipbreaker for controlled chips Parallelogram form with 0.8 mm radius Cylindrical hole with 40°–60° countersink Higher throughput from a wear-resistant coating The insert uses a PVD-coated carbide grade (AH140) developed for milling tasks that demand both a sharp cutting edge and consistent tool life. The thin, hard coating reduces abrasive wear and helps to maintain edge geometry over longer cycles, which translates into fewer indexings and less machine downtime. For production environments the result is measurable: more finished parts per tool and improved process repeatability. The coating technology is explained here to aid selection: physical vapour deposition (PVD) applies a hard film to the substrate to resist abrasion while preserving toughness at the cutting edge. Secure seating and geometry that reduces chatter A stable clamping interface and the correct insert geometry are decisive for surface finish and tool life. This indexable plate features a parallelogram form and an 85° approach angle, together with a 7° clearance angle, which balance radial engagement and tool strength during face, shoulder and contour milling. The plate thickness of 3.18 mm and the defined seat geometry require the milling body and clamping screw to be matched precisely; correct assembly prevents micro‑movement and reduces the risk of edge breakouts. In practice, matching the insert to the cutter body is a straightforward way to increase process reliability and maintain consistent part quality. Consistent chip control and versatile milling applications Chip evacuation and edge protection are supported by a one-sided chipbreaker and a cylindrical hole with a 40°–60° countersink, enabling secure clamping and directed chip flow under a range of cutting conditions. The 0.8 mm corner radius increases edge robustness for medium to heavy engagement passes while still allowing acceptable corner definition. Typical uses include face milling, shoulder milling, slotting and contouring within the respective milling family; the insert is supplied as part of a system comprising the milling body, the indexable insert, a clamping screw and, where required, an underlay. Where process security and repeatable edge performance are priorities, this solution offers a pragmatic balance between productivity and tool life. For technical matching, availability and application advice on Tungaloy ACMT060308 AH140 inserts contact Metav Werkzeuge: info@metav-werkzeuge.com | +49 2822 7131930 — our consultants will assist with the correct milling body and clamping specification Technical data Article number: 6820621 SKU: 6820621-Tungaloy Manufacturer SKU: TUN6820621 Designation: ACMT060308 AH140 Model series: Fräswendeschneidplatten Manufacturer: Tungaloy Facts Size: 06 Thickness: 3.18 mm Corner radius: 0.8 mm Clearance angle: 7° Approach/cutting angle: 85° ISO code: 060308 Special features Material: carbide, PVD-coated (AH140) Parallelogram form One-sided chipbreaker Cylindrical hole with one-sided countersink 40°–60° Platen seat, geometry and milling body must match Typical applications: face, shoulder, slot, high-feed and contour milling FAQ What milling operations are suitable for this insert? The ACMT060308 AH140 indexable insert is suitable for face milling, shoulder milling, slotting, high‑feed and contour milling within the appropriate Tungaloy milling system. Which cutting conditions favour the AH140 grade? AH140 is a wear‑ and chipping‑resistant PVD‑coated grade designed for applications where a sharp cutting edge and process security are required; it performs well under steady cutting with controlled chip evacuation. How important is matching the insert to the milling body? Very important — the insert seat, geometry and milling body must be technically compatible to ensure correct clamping and to avoid instability or premature edge failure when using the ACMT060308 AH140. What are the key geometrical parameters to check before fitting? Check thickness (3.18 mm), 0.8 mm corner radius, 7° clearance angle, 85° approach angle, plate form (parallelogram) and hole style (cylindrical with 40°–60° countersink). What chip control features are integrated? Chip control is provided by a one‑sided chipbreaker and the combined cylindrical hole with a one‑sided countersink, which support secure clamping and directed chip flow. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.

ACMT 060308 GH330 Wendeplatten - Tungaloy

Efficient milling performance is achieved through the combination of the GH330 grade and a 0.8 mm corner radius, delivering high wear resistance and stable cutting edges. The parallelogram form and cylindrical hole with countersink ensure secure seating and reliable clamping in compatible milling bodies. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. ACMT 060308 GH330 milling insert for Fräsen by Tungaloy ACMT 060308 GH330 is an indexable milling insert designed for a range of milling operations within Tungaloy systems, offering robust wear resistance and consistent edge stability in industrial production environments. High wear resistance GH330 grade Parallelogram shape for versatile milling Cylindrical hole with 40°–60° countersink 0.8 mm corner radius and 7° relief angle Boosted productivity through material and grade selection The ACMT060308 GH330 insert is produced from carbide and engineered with the GH330 cutting grade to balance wear resistance and toughness. This combination reduces tool-change frequency and delivers a predictable lifecycle, which supports continuous production. The result is measurable productivity gains and lower overall tooling costs when used in suitable milling bodies. The single-sided chipbreaker enhances chip control for many common machining tasks, contributing to consistent surface quality and fewer interruptions. Geometry optimised for accessibility and repeatability The parallelogram shape and an included 85° cutting angle provide excellent access to shoulders and intricate contours, while the 0.8 mm corner radius helps maintain edge strength during interrupted cuts. A 7° relief angle reduces rubbing at the flank and promotes stable cutting conditions. These geometric choices shorten setup time and improve repeatability across batches because the insert seating and orientation are consistent when paired with matching tool holders. Secure clamping and system compatibility The insert features a cylindrical hole with one-sided countersink (40°–60°), enabling secure clamping and straightforward replacement in indexable milling bodies designed for Tungaloy systems. It is essential that the insert seat, geometry and milling body are technically compatible to guarantee correct fixation and to achieve the published performance characteristics. The robust seating system minimises micro-movement during heavy cuts, which preserves edge life and contributes to more stable machining. Practical application range and machining benefits Designed primarily for milling, this insert suits face, shoulder, slot, high-feed and contour milling depending on the assigned tool family. The combination of GH330 grade and the specified geometry yields reliable performance across varied operations: efficient material removal during roughing and acceptable surface finish during semi-finishing. For production environments seeking a pragmatic, application-oriented solution, the insert provides an attractive balance of economy, process stability and straightforward interchangeability within a managed tool inventory. Contact Metav Werkzeuge for application guidance on Tungaloy GH330 inserts and precise compatibility checks; enquiries: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6800878 Manufacturer SKU: TUN6800878 Model series: Fräswendeschneidplatten Core data Thickness: 3.18 mm Corner radius: 0.8 mm Relief angle: 7° Insert size: 06 Seat/cutting angle: 85° Special features Material: carbide Grade: GH330 Shape: parallelogram Hole style: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: single-sided Plate form: ACMT060308 Intended application: milling (face, shoulder, slot, high-feed, contour) FAQ What applications is this insert intended for? The ACMT060308 GH330 Tungaloy insert is intended for milling tasks such as face, shoulder, slot, high-feed and contour milling, depending on the associated tool family. What are the key dimensions and angles of the insert? The insert has a thickness of 3.18 mm, a corner radius of 0.8 mm, a relief angle of 7° and a seat/cutting angle of 85°, as specified for the ACMT060308 GH330. How does the GH330 grade affect machining performance? The GH330 grade provides a balance of wear resistance and toughness; with the ACMT060308 GH330 this translates into longer edge life and reliable cutting under varied milling conditions. Is the insert compatible with all milling bodies? Compatibility requires matching the insert seat, geometry and milling body; the ACMT060308 GH330 is designed for use in Tungaloy milling systems and must be used with technically compatible holders. What clamping and chip control features are provided? The insert includes a cylindrical hole with a one-sided countersink (40°–60°) for secure clamping and a single-sided chipbreaker for improved chip formation and evacuation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.

ACMT 060308 T3130 Wendeplatten - Tungaloy

Take advantage of the combination of T3130 grade performance, robust carbide construction and a precise 0.8 mm corner radius for reliable milling cycles; order directly via Metav Werkzeuge or contact our consultants for matching cutter bodies. ACMT 060308 T3130 milling indexable insert by Tungaloy — parallelogram form, 85° cutting angle ACMT 060308 T3130 is an indexable milling insert designed for use in Tungaloy milling systems and suited to face, shoulder, slot, high‑feed and contour milling operations. Parallelogram insert form for versatile machining T3130 grade for wear resistance and edge stability Cylindrical hole with countersink 40°–60° for secure clamping 0.8 mm corner radius for balanced edge strength Stable cutting performance for productive milling applications This insert delivers consistent cutting behaviour through a balanced combination of T3130 carbide grade and a carefully designed geometry. The T3130 grade complements the insert’s shape to provide improved wear resistance and edge stability, which translates into longer tool life under mixed cutting conditions. Because the plate is made of carbide, it offers high rigidity and thermal resistance compared with high‑speed steel alternatives, enabling stable performance in interrupted and continuous cuts. The parallelogram form and 85° cutting angle facilitate robust face and shoulder milling with predictable chip flow. Precise clamping and secure fit reduce downtime The insert’s cylindrical hole with one‑sided countersink (40°–60°) ensures a reproducible and secure seat when mounted in compatible milling bodies. A correctly matched insert seat, geometry and cutter body are essential for process stability; the system design reduces micro‑movement at the cutting edge, lowering the risk of premature edge failure. With a plate thickness of 3.18 mm and a defined relief angle of 7°, the component provides a compact but rigid connection that supports accurate chip evacuation and repeatable indexing cycles. Controlled edge geometry for predictable surface finish A 0.8 mm corner radius offers a compromise between edge strength and the ability to produce a good surface finish without excessive cutting forces. The single‑sided chipbreaker is engineered to guide chips efficiently in typical milling operations, helping maintain consistent contact at the tool–workpiece interface. For workshops seeking reproducible part quality, this geometry reduces the need for frequent rework and enables steady production runs across common materials processed in milling. Flexible application across milling tasks and tool families The insert is suitable for a wide range of milling tasks — from planing and shoulder work to high‑feed and contour milling — provided the insert is combined with the correct Tungaloy cutter body and clamping hardware. The parallelogram plate allows flexibility in insert indexing and makes it straightforward to incorporate into production tooling where versatility and economy are priorities. When paired with the appropriate tool body, the component supports efficient material removal rates while maintaining edge life. Contact Metav Werkzeuge for tailored recommendations on Tungaloy milling inserts and ensure optimal performance with the T3130 grade in your machining setup Technical data Article number: 6853801 Manufacturer SKU: TUN6853801 SKU: 6853801-Tungaloy Model series: Milling indexable inserts Type designation: ACMT060308 Dimensions & core data Corner radius: 0.8 mm Thickness: 3.18 mm Cutting angle: 85° Relief angle: 7° Size designation: 06 Materials & features Material: Carbide Grade: T3130 Plate form: Parallelogram Hole: with hole Hole style: cylindrical hole + one‑sided countersink (40°–60°) Chipbreaker: one‑sided Application: milling System: for Tungaloy milling systems; insert seat, geometry and cutter body must match FAQ What milling operations suit this insert best? The insert is designed for a variety of milling tasks — face, shoulder, slot, high‑feed and contour milling — when used in the correct Tungaloy milling body with matching geometry and clamping. How does the T3130 grade affect tool life? T3130 offers a balanced mix of wear resistance and toughness; the grade enhances edge stability and typically extends usable life in general milling applications. Is this insert compatible with non‑Tungaloy cutter bodies? The insert is intended for use in Tungaloy milling systems; compatibility depends on seat geometry and clamping method, so matching the insert seat and cutter body is essential for safe operation. What clamping does the hole and countersink provide? The cylindrical hole with a one‑sided countersink (40°–60°) provides a reproducible, secure fit that improves repeatability and reduces micro‑movement at the cutting edge during indexing. Which materials are appropriate for machining with this insert? The insert’s carbide construction and T3130 grade make it suitable for a broad range of materials commonly encountered in milling; selection should be guided by cutting data and the specific tool family used. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.

ACMT 07T308 AH120 Wendeplatten - Tungaloy

Take advantage of the PVD-coated AH120 carbide grade, the 0.8 mm corner radius and the precision seating for consistent milling performance; order directly via Metav Werkzeuge or contact our consultants for application advice. ACMT07T308 AH120 indexable milling insert for Tungaloy – PVD-coated carbide, 0.8 mm corner radius A ACMT07T308 AH120 indexable insert designed for Tungaloy milling systems, engineered for face, shoulder, slot, high-feed and contour milling where a sharp cutting edge and process security are required. PVD-coated carbide AH120 grade Sharp cutting edge for stable processes Parallelogram, 07 size, 0.8 mm corner radius Cylindrical hole with single-side countersink Consistent cutting performance and enhanced process security The PVD-coated grade AH120 provides a wear- and breakage-resistant cutting edge that is optimised for continuous milling operations. The PVD-coated surface reduces built-up edge and improves heat resistance, which extends tool life and maintains surface finish over longer runs. With a sharp cutting edge and the grade’s focus on process security, this insert supports higher metal-removal rates and fewer unplanned tool changes, resulting in a more predictable production flow and reduced downtime. Geometry that adapts to multiple milling tasks The parallelogram shape in 07 size offers accessibility and stable engagement for shoulder and face milling, while the design also accommodates slotting and contour work when the correct cutter body is used. The 0.8 mm corner radius balances edge strength and profile accuracy, and the 7° relief promotes efficient chip flow and a clean cutting action. The incorporated single-sided chipbreaker is tailored to chip control in many milling scenarios, helping to prevent clogging and improve surface integrity. Secure mounting for repeatable accuracy A reliable clamping interface is provided by the cylindrical hole with a single-side countersink (40°–60°), together with a plate thickness of 3.97 mm. These features ensure consistent seating and repeatable positioning in the milling body, which is critical for maintaining tolerances across production batches. Note that insert seat, geometry and the milling body must be technically matched to guarantee clamping stability and safe operation. Application range and practical handling notes Designed primarily for milling, the insert performs well in planing, shoulder, slot, high-feed and contour operations, depending on the chosen tool family. The grade is especially suitable where durability and a sharp edge are required simultaneously. For selection and setup, confirm the cutter body is compatible with the indexable milling insert and check seating dimensions before use. If further technical data or cutting parameter recommendations are needed, Metav Werkzeuge can provide guidance and documentation to support efficient integration on the shop floor. Contact details are available for quick consultation. For dependable milling results with Tungaloy PVD-coated inserts, contact Metav Werkzeuge for personalised advice and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6816606 SKU: 6816606-Tungaloy Manufacturer SKU: TUN6816606 Model series: Indexable milling inserts Insert designation: ACMT07T308 AH120 Data Corner radius: 0.8 mm Thickness: 3.97 mm Relief angle: 7° Insert size: 07 Cutting/wedge angle: 85° Special features PVD-coated carbide, grade AH120 Parallelogram shape Single-sided chipbreaker Cylindrical hole with single-side countersink (40°–60°) With hole for secure clamping Suitable for face, shoulder, slot, high-feed and contour milling For Tungaloy milling systems—insert seat and geometry must match Material: carbide FAQ Is this insert compatible with Tungaloy milling cutters? The ACMT07T308 AH120 indexable milling insert is intended for use in Tungaloy milling systems; correct compatibility requires that the insert seat, geometry and cutter body are technically matched. Which milling operations does this insert suit best? This insert is suitable for face, shoulder, slot, high-feed and contour milling tasks, with the exact application depending on the chosen milling body and assembly. What are the main advantages of the AH120 grade? The AH120 grade offers a wear- and breakage-resistant PVD-coated carbide formulation that combines a sharp cutting edge with strong process security, making it effective for continuous milling operations. How does the hole and countersink affect mounting? The cylindrical hole with a single-side countersink (40°–60°) allows secure clamping and precise repeatable seating, improving stability and dimensional consistency in production. How can the insert be identified on the tool list? Look for the designation ACMT07T308 AH120 and SKU 6816606-Tungaloy; size 07, corner radius 0.8 mm and thickness 3.97 mm are the key identifiers. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.

ACMT 07T308 AH140 Wendeplatten - Tungaloy

Benefit from the combination of a PVD-coated AH140 grade and a precise 0.8 mm corner radius to increase process reliability and surface quality in milling operations; the insert is compatible with Tungaloy milling systems and can be ordered via Metav Werkzeuge or discussed with our technical consultants. ACMT 07T308 AH140 – Tungaloy milling indexable insert for Fräsen, PVD-coated carbide, 0.8 mm radius The ACMT07T308 AH140 is a PVD-coated cemented carbide indexable insert for Tungaloy milling systems, engineered for face, shoulder, slot, high-feed and contour milling where a sharp cutting edge and process security are required. PVD-coated AH140 for wear resistance 0.8 mm corner radius for precise profiling Parallelogram shape with 85° cutting angle Cylindrical hole with countersink 40°–60° Consistent cutting and extended in-process life The PVD-coated grade delivers reliable wear resistance and improved edge stability under interrupted cuts. The AH140 coating on a cemented carbide substrate provides a balance between toughness and hardness, reducing the risk of chipping during heavy engagement. This stability translates into more consistent workpiece finish and fewer unplanned tool changes, which supports smoother production cycles and predictable tool consumption. The insert’s single-sided chipbreaker promotes manageable chip formation, helping to maintain cut quality across a variety of milling tasks. Secure mounting and precise geometry for repeatable results A stable clamping interface and correct seating are essential for repeatable performance; the insert’s parallelogram shape and 85° cutting angle suit applications requiring good radial engagement and accurate shoulder preparation. The central cylindrical hole with a single-sided countersink (40°–60°) ensures reliable retention in compatible Tungaloy cutter bodies, while the 7° relief angle and 3.97 mm thickness contribute to strength at the cutting edge. The 0.8 mm corner radius offers a useful compromise between strength and profile detail, enabling precise profiling without sacrificing robustness. Practical selection guidance for production use Selection should focus on matching insert, cutter body and seating geometry to achieve the expected results; the insert is part of a modular milling system, so technical compatibility with the tool body is mandatory. Typical uses include planing, shoulder milling, slotting and high-feed operations, where the combination of a sharp edge and process security is required. Choosing the AH140 PVD variant supports longer operational windows and reduces the likelihood of edge breakout in mixed-material production. For system integration, verify seat geometry and clamping method to ensure the intended performance is realised. For application advice, matching tool-body selection or availability of the Tungaloy ACMT 07T308 AH140 PVD-coated insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss technical matching and stock status. Technical data Article number: 6820622 Manufacturer SKU: TUN6820622 SKU: 6820622-Tungaloy Model series: Fräswendeschneidplatten Designation: ACMT07T308 AH140 Tungaloy-Wendeplatte Facts Corner radius: 0.8 mm Relief angle: 7° Cutting angle: 85° Plate thickness: 3.97 mm Insert size: 07 Special features Material: cemented carbide Coating: PVD, AH140 Shape: parallelogram Chipbreaker: one-sided Hole: cylindrical hole with single-sided countersink 40°–60° Application: milling (face, shoulder, slot, high-feed, contour) Compatibility: for Tungaloy milling systems FAQ What materials is this insert suitable for? The ACMT07T308 AH140 is specified as a versatile milling insert; the AH140 PVD grade provides wear and chipping resistance suitable for a broad range of common milling materials where a sharp cutting edge and process reliability are required. How does the 0.8 mm corner radius affect the finish? A 0.8 mm corner radius balances edge strength with detail in the profile; it supports better surface finish on shoulders and faces while offering resistance to edge breakdown during medium to heavy milling. Is the insert compatible with all Tungaloy milling cutters? Compatibility requires matching of the insert seat, geometry and clamping method; the ACMT07T308 is designed for Tungaloy milling systems, but the cutter body must accept the ACMT geometry and the central-hole configuration. What role does the single-sided chipbreaker play? The single-sided chipbreaker assists in controlling chip formation and evacuation for the intended milling modes, contributing to stable cutting and reduced risk of recutting chips on the workpiece. Can this insert handle interrupted cuts and slotting operations? The combination of PVD-coated AH140 and a robust cemented carbide substrate improves edge stability under interrupted cuts; the insert is suitable for slotting and similar operations when fitted in an appropriate cutter body. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.

ACMT 07T308 GH330 Wendeplatten - Tungaloy

Take advantage of the combination of wear-resistant GH330 grade, robust carbide construction and precise geometry for consistent milling results; order original Tungaloy inserts via Metav Werkzeuge or consult our team for configuration and availability. ACMT 07T308 GH330 Tungaloy indexable milling insert — parallelogram form, 85° orientation The ACMT 07T308 GH330 is a carbide indexable insert for Tungaloy milling systems, engineered for face, shoulder, groove and high-feed milling where plate seat, geometry and cutter body must match technically. GH330 grade for enhanced wear resistance Parallelogram form for secure mounting Single-sided chipbreaker for controlled chip flow Engineered for consistent milling performance The insert is manufactured in carbide and specified for milling duties where repeatable tool life and predictable wear are required. The selected GH330 grade balances hardness and toughness to resist abrasive wear while maintaining edge stability, which reduces downtime for insert changes and supports steady production. With an 85° orientation and a 0.8 mm corner radius, the geometry enables reliable edge engagement and surface finish control on typical milling operations. The design focuses on process efficiency and predictable results rather than experimental parameters. Compatibility and mounting advantages that save setup time Designed for use within Tungaloy milling systems, the plate’s parallelogram shape and the specified seat requirements ensure a secure fit when paired with matching cutter bodies. The insert features a cylindrical hole with a one-sided countersink (40°–60°), permitting stable clamping and repeatable positioning. Such mechanical consistency reduces the need for frequent re-adjustment and supports faster tool changes in production workflows. Where tool families permit, the component suits planing, shoulder and contour milling tasks without modifications to the cutter body. Chip control and edge security for reliable performance The single-sided chipbreaker provides directed chip formation to aid evacuation and reduce the risk of built-up edge under varying cutting conditions. Combined with the GH330 wear properties and the precision flank geometry, the insert promotes longer edge life and better surface consistency. The insert thickness of 3.97 mm and the controlled relief angle of 7° contribute to cutting stability under moderate to heavy feed rates, making the component a pragmatic choice for manufacturers seeking steady, repeatable machining performance with a focus on economy and uptime. For original Tungaloy inserts and tailored advice, contact Metav Werkzeuge for ordering and technical clarification — Metav Werkzeuge can verify tool-body compatibility and delivery options. Technical data Article number: 6800879 Manufacturer SKU: TUN6800879 SKU: 6800879-Tungaloy Model series: Fräswendeschneidplatten Label: ACMT07T308 GH330 Tungaloy-Wendeplatte Material: Carbide Facts Cutting angle: 85° Corner radius: 0.8 mm Thickness: 3.97 mm Relief (free) angle: 7° Size designation: 07 Special features Grade: GH330 Form: Parallelogram Chipbreaker: Single-sided Hole: With cylindrical hole + one-side countersink (40°–60°) Typical application: Milling (face, shoulder, groove, high-feed, contour) FAQ What is the corner radius of the insert? The insert has a 0.8 mm corner radius, which supports a balance between edge strength and surface finish for common milling tasks with the ACMT 07T308 GH330 indexable insert. Which geometry and mounting does this insert require? This ACMT 07T308 GH330 insert uses a parallelogram form and a cylindrical hole with a one-sided countersink (40°–60°); the seat and cutter body must match the specified geometry for secure clamping. What material is the insert made from and what grade is used? The insert is manufactured from carbide and uses the GH330 grade, which is chosen to provide a compromise between wear resistance and toughness for milling operations. Is the chip control tailored for a particular milling style? Yes, the single-sided chipbreaker is designed to control chip formation effectively across face, shoulder and contour milling where the tool family and cutting parameters permit its use. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.

ACMT 07T308 T3130 Wendeplatten - Tungaloy

Take advantage of the combination of carbide construction, the T3130 grade and a 0.8 mm corner radius for reliable edge stability and predictable wear behaviour in demanding milling operations; order the insert directly via Metav Werkzeuge or contact the technical consultants for compatibility advice. ACMT 07T308 T3130 milling insert (Tungaloy) — parallelogram form, 85° cutting angle The ACMT 07T308 T3130 is a parallelogram-shaped carbide indexable insert designed for milling applications, delivering a balance of wear resistance and toughness for general facing, shoulder, slot, high-feed and contour milling. Tungaloy grade T3130 for wear resistance Parallelogram form with 85° cutting angle Corner radius 0.8 mm for versatile finishing Cylindrical hole with countersink for secure clamping Precision and process stability for high-productivity milling The insert is manufactured from carbide and specified in the Tungaloy T3130 grade, combining wear resistance with edge toughness to extend tool life in mixed operating conditions. The parallelogram geometry and 85° cutting angle permit sturdy engagement for shoulder and face milling, while the defined 0.8 mm corner radius supports consistent surface quality without compromising chip formation. These design choices translate into stable cutting forces and predictable tool-change intervals, supporting efficient shop-floor planning and reduced downtime. Secure clamping and repeatable seating for accurate results A secure toolholder interface is essential for repeatable results; the insert includes a cylindrical hole with a single-sided countersink (40°–60°) that ensures positive location and reliable clamping with the matched milling body. Combined with the 3.97 mm plate thickness, the geometry provides mechanical stability under medium axial and radial loads. The single-sided chipbreaker promotes controlled chip flow, reducing re-cutting and helping to maintain edge integrity across long runs. This results in reproducible part tolerances and fewer scrap components. Application scope and compatible materials explained Configured for milling use, the insert is suitable for a wide range of operations — facing, shoulder, slotting, high-feed and contouring — depending on the tool family selected. The carbide substrate and the T3130 specification make the grade appropriate for a broad workpiece range where wear resistance and a robust cutting edge are required. For applications where a different balance of toughness or coating is necessary, choose the matching geometry and tool body that align with the insert’s seating and orientation to ensure optimal performance. For high-process reliability with Tungaloy inserts, request technical guidance or place an order via Metav Werkzeuge; our consultants at Metav Werkzeuge will verify system compatibility and advise on the correct tool body and clamping setup. Technical Data Article number: 6853802 SKU: 6853802-Tungaloy Manufacturer SKU: TUN6853802 Model series: Fräswendeschneidplatten Manufacturer: Tungaloy Core specifications Corner radius: 0.8 mm Plate thickness: 3.97 mm Cutting angle: 85° Relief angle: 7° Size designation: 07 Hole: cylindrical hole + single-sided countersink (40°–60°) Special features Grade / coating: T3130 Material: carbide Single-sided chipbreaker Parallelogram plate form For Tungaloy milling systems; compatible with matched tool bodies for facing, shoulder, slot, high-feed and profile milling FAQ What materials is this insert intended to machine? The insert in Tungaloy T3130 grade is designed for a broad range of workpiece materials where wear resistance and a stable cutting edge are required; suitability depends on the selected tool body and machining parameters. How does the 0.8 mm corner radius affect surface finish? A 0.8 mm corner radius balances strength and finishing capability, providing improved edge life while enabling good surface quality in general milling operations. Which toolholders are compatible with this insert? Compatibility requires a matching Tungaloy milling body with the correct seat geometry; the insert’s cylindrical hole with countersink ensures secure clamping when the toolholder and plate seat are technically matched. Is the chip control suitable for continuous long runs? The single-sided chipbreaker promotes controlled chip evacuation and contributes to consistent edge behaviour in extended production runs when process parameters are maintained. What should be checked before fitting the insert? Confirm that the plate seat, geometry and clamping screw match the insert specification and the tool family; ensure the seating orientation corresponds to the intended operation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.

ACMT 100408 AH120 Wendeplatten - Tungaloy

Combine the AH120 PVD-coated carbide grade with a precise 0.8 mm corner radius and a parallelogram form to deliver sharp-edge, process-secure milling results; order the insert directly via Metav Werkzeuge or ask our consultants if needed. ACMT100408 AH120 – milling indexable insert, parallelogram form, 0.8 mm radius | Tungaloy The ACMT100408 AH120 is a PVD-coated carbide indexable insert for milling, designed for use in compatible Tungaloy milling systems where insert seat, geometry and body match to ensure reliable clamping and optimal cutting performance. PVD-coated carbide for wear resistance Optimised for process-safe milling Parallelogram form for versatile cutting 0.8 mm corner radius for precision Cylindrical hole with single-sided countersink High-efficiency cutting with wear-resistant grade The insert's AH120 grade and PVD coating combine to provide improved edge stability and wear resistance during continuous milling. This results in predictable tool life and fewer unscheduled tool changes, which contributes to higher uptime on the shop floor. The description of the coating and carbide explains why cutting edges remain sharp: PVD creates a thin, hard layer that reduces adhesion and wear, while the cemented carbide substrate sustains mechanical strength under load. These technical choices translate directly into cost-efficiency and consistent part quality for series production. Secure seating and versatile system compatibility Designed for use in Tungaloy tool families, the insert requires matching of insert seat, geometry and milling body to achieve correct clamping and torque transmission. The insert comes with a cylindrical hole and a single-sided countersink (40°–60°) to suit common clamping screws and locational features; the parallelogram shape aids in positional flexibility for different tool holders. The 85° principal cutting face and the 7° relief angle support robust engagement in shoulder and plane milling, while the 4.76 mm plate thickness and 10 mm nominal size ensure mechanical stability when mounted. Precision contouring and reliable edge life A 0.8 mm corner radius balances sharpness and strength: small enough to achieve accurate contours and fine shoulder finishes, yet large enough to avoid premature chipping under moderate feed rates. This geometry is particularly suited for finishing passes, contour work and high-feed applications where a consistently sharp edge and process security are required. The one-sided chipbreaker design assists in stable chip formation and evacuation, reducing the risk of built-up edge and improving surface finish on a range of materials. Practical benefits for production workflows Using this PVD-coated carbide insert in a compatible milling system reduces setup variation and simplifies tool management: consistent wear behaviour means fewer adjustments to feeds and speeds over a tool's life. The combination of stable chip formation, robust cutting edge and standardised hole/countersink dimensions supports predictable performance in planing, shoulder, slot and contour milling. For production environments aiming for repeatability and high throughput, the insert offers a balance of productivity and component quality that aligns with modern machining demands. Contact Metav Werkzeuge today for tailored advice on Tungaloy inserts, confirmation of holder compatibility and availability for your milling applications. Technical data Article number: 6816607 Manufacturer article number: 6816607 SKU: 6816607-Tungaloy Manufacturer SKU: TUN6816607 Model series: Fräswendeschneidplatten Material: carbide Plate designation: ACMT100408 AH120 Facts Corner radius: 0.8 mm Relief angle: 7° Principal cutting angle: 85° Plate thickness: 4.76 mm Plate size: 10 mm Special features Parallelogram plate form PVD-coated grade AH120 Single-sided chipbreaker Cylindrical hole with one-sided countersink (40°–60°) With hole Intended use: milling (plan, shoulder, slot, high-feed, contour) FAQ What milling operations suit this insert best? This insert is intended for a wide range of milling tasks: planing, shoulder milling, slotting, high-feed and contour work when used in the appropriate Tungaloy milling bodies. Which materials can be machined with this grade? The AH120 PVD-coated carbide grade is designed for wear- and fracture-resistant milling across a broad material spectrum, providing stable edge life and good process security. How does the 0.8 mm corner radius affect finish and strength? A 0.8 mm radius provides a compromise between a sharp cutting edge for fine finishes and sufficient strength to resist edge chipping, making it suitable for finishing and contouring passes. Is this insert compatible with existing Tungaloy tool families? Compatibility requires matching the insert seat, geometry and milling body; the insert's hole and countersink conform to common clamping arrangements but verification against the specific holder family is recommended. What does the PVD coating provide compared with uncoated grades? The PVD coating reduces flank and crater wear, lowers adhesion tendencies and extends edge life under continuous cutting, resulting in more consistent tool performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.

ACMT 100408 AH140 Wendeplatten - Tungaloy

High-performance, PVD‑coated AH140 grade delivers a sharp cutting edge and extended tool life; the parallelogram 10 mm insert with a 0.8 mm corner radius and secure cylindrical hole with countersink ensures repeatable clamping and precise milling results. Order the insert directly via Metav Werkzeuge or ask our consultants for application matching and availability. ACMT100408 100408 AH140 – Tungaloy indexable insert for milling The ACMT100408 AH140 is a PVD‑coated carbide indexable insert designed for face, shoulder, slot, high‑feed and contour milling within compatible Tungaloy milling systems. PVD‑coated AH140 carbide grade Parallelogram form, 10 mm size Cylindrical hole with countersink 40°–60° 0.8 mm corner radius, single‑sided chipbreaker Consistent cutting performance where sharp edges matter The PVD‑coated AH140 carbide construction provides a balance of wear resistance and edge stability that is particularly beneficial for milling operations requiring a sharp cutting edge and process security. This combination reduces micro‑chipping and helps maintain cutting geometry over longer periods, resulting in more consistent component dimensions and fewer tool changes. The hardened coating also contributes to improved surface finish and predictable tool life under varying cutting conditions. Secure seating and straightforward integration into milling systems The insert’s parallelogram form and the cylindrical hole with single-sided countersink (40°–60°) support stable clamping and accurate seat location in matching tool bodies. With a nominal size of 10 mm, a thickness of 4.76 mm and an 85° lead angle, the geometry is geared towards repeatable positioning and reliable chip evacuation when paired with the correct clamping screw and support pad. Compatibility requires the tool body, insert seat and geometry to match technically; proper matching prevents movement under load and preserves cutting performance. Process stability, productivity and surface quality A single‑sided chipbreaker combined with the sharp edge behaviour of this grade promotes controlled chip formation in a range of milling tasks, from face milling to high‑feed operations. The 0.8 mm corner radius offers a compromise between robustness and detail capability, enabling stronger corners than smaller radii while still supporting good contour definition. The result is higher uptime and high productivity through fewer interruptions for edge dressing or replacement, alongside reproducible workpiece quality across production batches. For confirmation of compatibility with milling bodies or to request delivery details for the Tungaloy ACMT100408 AH140 indexable insert, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930; our technical consultants will advise on fitment and availability. Technical Data Article number: 6820623 SKU: 6820623-Tungaloy Manufacturer SKU: TUN6820623 Manufacturer: Tungaloy Type: Milling indexable insert Material: carbide Grade / coating: AH140, PVD‑coated Facts Size: 10 mm Thickness: 4.76 mm Corner radius: 0.8 mm Lead angle: 85° Relief angle: 7° Hole: with hole Countersink angle: 40°–60° Special features Parallelogram insert form Single‑sided chipbreaker Cylindrical hole with single‑sided countersink (40°–60°) Suited for face, shoulder, slot, high‑feed and contour milling (depending on tool family) Designed for Tungaloy milling systems; insert seat and geometry must match FAQ What milling tasks is this insert suited for? The ACMT100408 AH140 insert is suitable for face milling, shoulder milling, slotting, high‑feed and contour milling, depending on the assigned tool body and application parameters. What are the advantages of the AH140 PVD coating? The AH140 PVD‑coating increases wear resistance and helps prevent edge chipping, which supports longer tool life and more consistent surface finishes during interrupted or continuous milling. How critical is seat and geometry compatibility for this insert? Compatibility is essential: the insert seat, clamping screw and milling body must match the ACMT100408 geometry to ensure secure clamping and repeatable performance in the Tungaloy system. What does the 0.8 mm corner radius mean for my components? A 0.8 mm corner radius offers improved robustness over finer radii while still allowing for accurate contouring, helping to balance edge strength with detail in component profiles. Can this insert be used in high‑speed milling? The PVD‑coated carbide construction and chipbreaker design allow the insert to perform reliably across a range of cutting speeds; actual cutting parameters should be chosen according to workpiece material and tool body recommendations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.

ACMT 100408 GH330 Wendeplatten - Tungaloy

Benefit from the combination of the GH330 wear-resistant grade and the precision parallelogram form for stable seating and consistent chip control; the result is reliable, high-throughput milling with reduced downtime. Order the ACMT 100408 GH330 insert directly via Metav Werkzeuge or consult our specialists for application advice. ACMT 100408 GH330 – Indexable milling insert for milling (Tungaloy) ACMT 100408 GH330 is an indexable insert engineered for a broad range of milling operations within Tungaloy milling systems, where insert seat, geometry and cutter body are required to match precisely. Parallelogram shape for stable seating GH330 grade for wear resistance and toughness 0.8 mm corner radius for improved edge strength Cylindrical hole with 40°–60° countersink Increased productivity through controlled wear and chip formation The GH330 grade, applied to a cemented carbide substrate, balances wear resistance, toughness and edge stability, resulting in longer effective tool life under continuous milling loads. As an indexable insert with a dedicated chipbreaker on one side, it promotes consistent chip formation which reduces heat concentration at the cutting edge and helps maintain surface finish across extended runs. This combination is particularly beneficial for repetitive production tasks where predictable tool behaviour and fewer indexings lead to measurable time savings and lower operating costs. Precision seating and mechanical reliability for repeatable results The parallelogram plate form and the central cylindrical hole with one-sided countersink (40°–60°) ensure secure clamping and accurate seating in compatible cutter bodies. Key dimensions such as the 0.8 mm corner radius, 4.76 mm plate thickness and the 7° clearance angle contribute to edge stability and prevent premature chipping when engaged in shoulder, slot or contour milling. Where assembly and geometry match the cutter family, the insert delivers repeatable concentricity and a stable cutting line, which simplifies process set-up and reduces the need for frequent readjustments. Versatile specification for production-oriented milling systems Designed for use in Tungaloy milling tool families, the insert supports a wide spectrum of milling applications from face and shoulder milling to high-feed and contour operations depending on the selected cutter body and geometry. The GH330 microstructure is optimised to offer a reliable balance between abrasive wear resistance and fracture toughness, making this insert a pragmatic choice where consistent performance and predictable tool life are priorities. As a replaceable cutting edge component, it allows quick index changes and reduces overall tooling costs in high-volume machining environments. For reliable, production-ready milling with genuine Tungaloy GH330 indexable inserts, contact Metav Werkzeuge for availability and tailored application support. Technical data Article number: 6800880 Manufacturer SKU: TUN6800880 SKU: 6800880-Tungaloy Model series: Fräswendeschneidplatten Product name: ACMT100408 GH330 Tungaloy-Wendeplatte Facts Corner radius: 0.8 mm Plate thickness: 4.76 mm Plate size: 10 Clearance angle: 7° Geometry angle: 85° Hole: with hole Countersink angle: 40°–60° Special features Material: cemented carbide Grade: GH330 Plate form: parallelogram Chipbreaker: one-sided Intended use: milling Compatibility: for Tungaloy milling systems (matching seat and geometry required) FAQ What milling operations suit this insert best? The ACMT100408 GH330 indexable insert is designed for face, shoulder, slot, high-feed and contour milling depending on the chosen cutter body and geometry within Tungaloy milling systems. How does the GH330 grade affect tool life? The GH330 grade provides a balanced combination of wear resistance and toughness for the cemented carbide insert, which extends effective tool life by improving edge stability under typical milling loads. What are the key dimensions to check before fitting the insert? Verify the 0.8 mm corner radius, 4.76 mm plate thickness, parallelogram form and the central hole with countersink (40°–60°) to ensure correct seating in the cutter body. Is this insert suitable for all Tungaloy milling cutters? The insert is intended for Tungaloy milling systems where insert seat, geometry and cutter body are technically compatible; the insert must be matched to the appropriate cutter family for safe and effective use. What does the one-sided chipbreaker provide? A one-sided chipbreaker aids controlled chip formation and evacuation on the active cutting side, improving surface finish and reducing heat concentration at the cutting edge during continuous milling. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.

ACMT 100408 T3130 Wendeplatten - Tungaloy

Take advantage of the combination of proven T3130 grade, robust carbide construction and precise geometry for stable, productive milling operations; order directly via Metav Werkzeuge or consult their team for application guidance. ACMT100408 T3130 milling insert — ACMT 100408 T3130 by Tungaloy (0.8 mm radius) An ACMT100408 T3130 indexable insert engineered for face, shoulder, slot and high-feed milling in compatible Tungaloy milling systems. T3130 grade for extended tool life 0.8 mm corner radius for robust cutting edges Parallelogram form for versatile milling geometries Cylindrical hole with single-sided countersink Durable grade engineered for productive milling The insert is produced in a carbide substrate and specified with the T3130 grade, which balances wear resistance and toughness to sustain longer cutting cycles. This composition reduces frequent tool changes, supporting continuous production runs and predictable tool life. The result is measurable process stability and fewer interruptions during face and shoulder milling, contributing to improved throughput and lower overall tooling consumption. Geometry that secures repeatable clamping and accuracy The parallelogram profile and the defined seating geometry ensure stable assembly in designed milling bodies; the insert has a cylindrical hole + single-sided countersink (40°–60°) to match the clamping screw interface. A precise thickness of 4.76 mm and an entry angle of 85° provide predictable engagement angles and repeatability from index to index. Correct matching of the insert seat, geometry and cutter body is essential for safe, repeatable performance. Optimised cutting edge and chip control for consistent surfaces With a 0.8 mm corner radius and a one-sided chipbreaker, the insert offers dependable edge strength while enabling controlled chip formation in a range of milling tasks. The modest corner radius enhances edge robustness under varied feed conditions, while the chipbreaker helps to evacuate chips efficiently, improving surface finish and reducing the risk of built-up edge on the tool. This combination supports both roughing and semi-finishing operations when paired with the appropriate cutter body. Broad milling applications and system compatibility Designed specifically for milling, the insert suits face, shoulder, groove, high-feed and contour milling operations depending on the assigned tool family. It is intended for use in Tungaloy systems where seat, insert geometry and cutter body are technically matched; mismatches can affect clamping security and cutting performance. The insert’s features make it a reliable option where a balance of edge stability, wear resistance and consistent chip control is required. Contact Metav Werkzeuge for availability and tailored application advice on the Tungaloy ACMT100408 T3130 milling inserts — Metav Werkzeuge can advise on compatible cutter bodies and secure supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6853803 SKU: 6853803-Tungaloy Manufacturer SKU: TUN6853803 Series: Indexable milling inserts Material: Carbide Grade: T3130 Shape: Parallelogram Facts Size: 10 mm Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 7° Cutting angle: 85° Countersink: 40°–60° Special features One-sided chipbreaker Cylindrical hole + single-sided countersink (40°–60°) Intended for milling operations Requires matching seat and cutter body geometry Balances wear resistance and toughness FAQ Which milling operations are suitable for this insert? The ACMT100408 T3130 insert is intended for face, shoulder, groove, high-feed and contour milling when used in compatible Tungaloy milling systems. What performance characteristics does the T3130 grade provide? T3130 offers a combination of wear resistance and toughness that complements the insert geometry, supporting stable cutting and enhanced edge life in milling applications. How does the 0.8 mm corner radius affect operation? A 0.8 mm corner radius increases edge robustness and reduces the risk of edge chipping under interrupted cuts, while still allowing acceptable surface quality for finishing passes. What clamping interface is required for secure use? The insert requires a compatible cutter body that accepts a parallelogram-shaped insert with a cylindrical hole and single-sided countersink; the clamping screw and seat must match this configuration. How is chip control achieved with this insert? Chip control is managed via the one-sided chipbreaker geometry, which promotes predictable chip formation and evacuation during common milling tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.

ADMT 130308 AH120 Wendeplatten - Tungaloy

Take advantage of the combination of a PVD-coated carbide grade designed for wear and breakage resistance and a precise 0.8 mm corner radius to achieve stable, sharp cutting performance; order directly via Metav Werkzeuge or consult their specialists for set-up and selection advice. ADMT130308 AH120 indexable milling insert by Tungaloy — PVD-coated carbide, 0.8 mm radius The ADMT130308 AH120 is an indexable milling insert for Tungaloy milling systems, engineered for face, shoulder, groove, high-feed and contour milling where a sharp cutting edge and process security are required. PVD-coated carbide grade AH120 for durability 0.8 mm corner radius for precise edge control Parallelogram form with 85° cutting angle Cylindrical hole with single-sided countersink Boost throughput with durable cutting edges and fewer interruptions The PVD-coated AH120 grade provides a wear-resistant and breakage-resistant cutting edge that maintains performance over extended cycles, reducing downtime and tool changes. The coating enhances thermal stability and adhesion, which improves edge life under continuous milling loads; this leads to measurable productivity gains and a more predictable machining process. Benefits are especially clear in operations requiring a consistently sharp geometry and stable chip formation. Predictable clamping and geometry for repeatable results The parallelogram insert form, combined with an 85° cutting angle and a 15° clearance, ensures a defined cutting orientation and stable mechanical support in the cutter body. The cylindrical hole with a single-sided countersink (40°–60°) secures the insert reliably under load, while the single-sided chipbreaker directs chips predictably. These design elements minimise vibration and improve surface finish, translating technical geometry into consistent component quality and reduced scrap rates. Seamless fit into established Tungaloy milling systems Designed as part of Tungaloy’s indexable milling system, the insert integrates with matching cutter bodies, clamping screws and shims where applicable; correct combination of insert seat, geometry and milling body is essential for optimal performance. This system approach simplifies stock management and allows rapid replacement without requalification of toolpaths in many setups. For customers seeking efficient machine uptime, the standardised form and ISO designation support straightforward tooling logistics. Application focus and practical guidance for selection The grade and geometry are targeted at demanding milling tasks where a sharp cutting edge and process security are priorities. The insert is manufactured from carbide and is intended for use in milling operations rather than turning or drilling. When choosing the appropriate insert variant, consider the cutter body compatibility and the desired corner radius; the supplied 0.8 mm radius offers a balance between robustness and precision for a wide range of milling contours. For selection assistance or specific machining data, Metav Werkzeuge provides technical consultation to ensure the chosen insert matches the operation. For direct ordering or technical advice on integrating Tungaloy inserts into production, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 — specialists are available to recommend the right configuration for the application. Technical Data Manufacturer article number: 6816608 SKU: 6816608-Tungaloy Manufacturer SKU: TUN6816608 Facts ISO designation: 130308 Corner radius: 0.8 mm Plate thickness: 3.18 mm Plate size: 13 mm Cutting angle: 85° Clearance angle: 15° Special features Grade: AH120, PVD-coated carbide Shape: Parallelogram Hole: Cylindrical hole with one-sided countersink (40°–60°) Chip control: Single-sided chipbreaker Intended use: Indexable milling insert for Tungaloy milling systems Typical applications: Face milling, shoulder milling, groove milling, high-feed and contour milling FAQ What milling tasks is this insert suited for? The ADMT130308 AH120 insert is suitable for face, shoulder, groove, high-feed and contour milling where a sharp cutting edge and process security are required. How does the AH120 grade improve performance? The AH120 PVD-coated carbide offers enhanced wear and breakage resistance, which helps maintain a sharp cutting edge and consistent machining results under continuous milling conditions. What must be checked before fitting the insert? Ensure the insert seat, geometry and milling body are technically matched; correct clamping using the appropriate screw and any necessary shim is essential for the intended performance of the insert. Does the insert require a special cutter body? The insert is designed for integration into compatible Tungaloy milling systems; using a matching cutter body that accepts the parallelogram form and the specified hole/countersink is necessary. What information identifies this specific insert? The insert is identified as ADMT130308 AH120 by Tungaloy with manufacturer article number 6816608 and SKU 6816608-Tungaloy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.

ADMT 130308 AH140 Wendeplatten - Tungaloy

Benefit from the combination of a PVD-coated carbide grade designed for wear and fracture resistance and a precise 0.8 mm corner radius, which together ensure stable, repeatable milling performance. Order the ADMT130308 AH140 directly via Metav Werkzeuge or contact our consultants for tailored advice. ADMT 130308 AH140 – Milling indexable insert, PVD-coated carbide by Tungaloy The ADMT130308 AH140 is an indexable insert for milling operations, engineered for face, shoulder, slot, high-feed and contour milling when used with compatible Tungaloy milling bodies. PVD-coated carbide for wear resistance Sharp cutting edge with process stability Parallelogram shape with cylindrical hole 0.8 mm corner radius for precision Reliable performance for productive milling The combination of a PVD-coated carbide substrate and the AH140 grade delivers a balance of wear resistance and chipping toughness that suits continuous production environments. A consistently sharp cutting edge reduces vibration and helps maintain surface finish, while the grade's resistance to breakage supports higher process security. In practice this reduces unplanned tool changes and increases uptime, which translates into measurable productivity gains for milling operations where repeatable metal removal rates are essential. The emphasis is on stable machining rather than aggressive overcutting. Precision geometry for repeatable results The insert’s parallelogram form with a cylindrical hole and a one-sided countersink (40°–60°) provides secure and repeatable clamping in compatible tool bodies, ensuring accurate seating and consistent cutting geometry. The specified 0.8 mm radius and the 15° clearance angle contribute to controlled chip flow and predictable edge engagement, while the overall geometry, defined by an 85° main angle, supports versatile tool paths. These design choices simplify process set-up and help achieve consistent tolerances across batches without complex adjustments. Integration and application guidance for reduced setup time Designed as part of a system comprising a milling body, indexable insert, clamping screw and, where required, a backing pad, this insert requires a correct match of seat, geometry and body to perform as intended. Typical applications include planing, shoulder milling, slotting and high-feed passes, depending on the selected tool family. The single-sided chipbreaker improves evacuation for many common materials. For further technical clarifications or to confirm compatibility with a specific holder, Metav Werkzeuge provides advisory support by e‑mail or phone, helping to reduce trial-and-error and shorten commissioning times. For secure, high‑confidence milling with Tungaloy’s AH140 grade, contact Metav Werkzeuge for a customised recommendation and order support Technical data Article number: 6820624 Manufacturer SKU: TUN6820624 SKU: 6820624-Tungaloy Designation: ADMT130308 Model series: Milling indexable inserts Material: carbide Core measurements Size: 13 mm Thickness: 3.18 mm Corner radius: 0.8 mm Clearance angle: 15° Geometry angle: 85° Countersink angle: 40°–60° Design and features PVD-coated carbide grade AH140 Single-sided chipbreaker Parallelogram insert form Cylindrical hole with one-sided countersink With hole (for secure clamping) Intended for milling: face, shoulder, slot, high-feed, contour System composition: milling body, insert, clamping screw, possible backing pad Sharp cutting edge for process security and reduced chipping FAQ What is the primary benefit of the AH140 grade? The AH140 grade provides a wear- and fracture-resistant PVD-coated carbide that combines a sharp cutting edge with enhanced process security for stable milling. Is the ADMT130308 compatible with all Tungaloy milling bodies? Compatibility requires matching the insert seat, geometry and body; the ADMT130308 performs reliably when used with Tungaloy milling systems that accept this parallelogram insert form. Which milling tasks suit this insert best? The insert is intended for planing, shoulder, slot, high‑feed and contour milling, depending on the specific tool family and cutting parameters. How does the 0.8 mm radius affect results? A 0.8 mm corner radius balances edge strength and finish quality, reducing the risk of chipping while maintaining dimensional precision on machined features. What does the hole and countersink design provide? The cylindrical hole with a single‑side countersink (40°–60°) ensures a secure, repeatable clamp interface that stabilises the insert during higher cutting loads. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer. Sind Sie sich nicht sicher, ob dieses Werkzeug Ihre Anforderungen erfüllt? Oder benötigen Sie ergänzende technische Daten? Kein Problem – wir stehen Ihnen gerne zur Verfügung. 📧 eMail: info@metav-werkzeuge.com ☎️ Telefon: +49 2822 7131930

ADMT 130308 T3130 Wendeplatten - Tungaloy

Take advantage of the T3130 grade and the insert’s stable seating geometry to increase tool life and reduce interruptions in milling operations; order directly via Metav Werkzeuge or consult the team for application-matched advice. ADMT 130308 T3130 – Milling insert for Fräsen, 85° cutting edge, Tungaloy ADMT130308 T3130 is an indexable milling insert designed for a broad range of milling operations, providing a balance of wear resistance and edge stability for productive material removal. T3130 grade for wear resistance Parallelogram shape for stable seating 85° cutting edge angle for versatility Cylindrical hole with countersink 40°–60° Reliable performance through a balanced cutting grade The T3130 grade combines wear resistance and sufficient toughness to maintain cutting-edge integrity under varying cutting conditions. Manufactured from carbide, the insert supports consistent performance in face, shoulder, slot, high-feed and contour milling when paired with the correct milling body. The grade’s formulation promotes stable chip formation, which reduces unexpected edge breakdown and extends effective tool life. For process planners this means fewer indexings and more predictable production cycles. Secure clamping and geometry for repeatable results The parallelogram plate form and the cylindrical hole with one-sided countersink (40°–60°) ensure a reliable seat and straightforward clamping in compatible cutter bodies. With an 85° main cutting-edge angle and a relief angle of 15°, the geometry supports robust engagement and directional versatility while preserving edge strength. The insert’s corner radius 0.8 mm moderates cutting forces and surface finish; larger radii increase robustness, smaller radii improve detail. Confirming seat compatibility with the milling body avoids mounting errors and secures repeatable part quality. Practical selection and machining notes for efficient production With a 3.18 mm thickness and a plate size of 13, this insert is compact yet designed to withstand milling stresses when used within the specified system. The single-sided chipbreaker directs chips reliably for many common materials and process conditions; choosing feeds and speeds that match the T3130 performance window will support economical cutting. The insert is intended for the specified Tungaloy milling systems: correct matching of insert, clamping screw and body is essential for safe operation and to achieve the anticipated surface finish and tool life. For reliable, high-productivity milling select the Tungaloy ADMT 130308 T3130 insert and contact Metav Werkzeuge for ordering and compatibility consulting. Technical Data Article number: 6853804-Tungaloy Manufacturer SKU: TUN6853804 Manufacturer article number: 6853804 Material: carbide Model series: Fräswendeschneidplatten Use/Application: Fräsen Grade: T3130 Measurements Cutting-edge angle: 85° Plate size: 13 mm Plate thickness: 3.18 mm Corner radius: 0.8 mm Relief angle: 15° Special features Parallelogram plate form With hole: cylindrical hole + single-sided countersink (40°–60°) Single-sided chipbreaker Intended for Tungaloy milling systems System components: milling body, indexable insert, clamping screw, shim FAQ Which milling operations is this insert suitable for? The insert is suitable for face, shoulder, slot, high-feed and contour milling depending on the chosen milling body and application setup; the T3130 grade helps balance wear resistance and edge stability. What does the corner radius mean for surface finish and strength? A corner radius of 0.8 mm provides a compromise between improved edge strength and acceptable surface finish; the ADMT 130308 geometry is chosen to support durable milling with good surface quality. How is the insert secured and what must be checked during assembly? The ADMT 130308 uses a cylindrical hole with a single-sided countersink (40°–60°); ensure correct seating in the compatible cutter body and that clamping screws and shims match the system to guarantee stable fixation. What are the key material and grade characteristics? Manufactured from carbide and specified as grade T3130, the insert emphasises wear resistance, stable chip formation and edge stability for productive milling cycles. What identifiers help with ordering and traceability? Use the article number 6853804-Tungaloy and the Manufacturer SKU TUN6853804 when ordering or requesting technical clarification. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.

ADMT 17T308 AH120 Wendeplatten - Tungaloy

Take advantage of the combination of PVD-coated AH120 wear resistance, a stable 85° approach angle and a precise 0.8 mm corner radius for predictable milling results; order directly via Metav Werkzeuge or consult the technical team for application advice. ADMT 17T308 AH120 Tungaloy indexable insert for milling — PVD-coated carbide, 85° approach angle An ADMT17T308 AH120 indexable insert engineered for process-secure milling in compatible Tungaloy tool systems, suitable for plan, shoulder, slot, high-feed and contour operations. PVD-coated carbide AH120 85° approach angle for stable cuts Parallelogram shape, 17 mm size Cylindrical hole with 40°–60° countersink Consistent cutting performance that extends tool life The combination of a PVD-coated surface and the AH120 grade provides improved wear resistance and a sharp cutting edge, which translates into longer service intervals and fewer unplanned tool changes. As a carbide insert with a reinforced cutting geometry, it reduces flank and crater wear under standard milling conditions and supports steady machining parameters. This results in a better cost-per-part ratio and a more predictable production flow for batch and continuous operations. Secure seating and clamping for reliable process security Designed as a parallelogram-shaped insert with a central hole and a one-sided countersink, the geometry ensures accurate locating and repeatable clamping in the matching milling body. The 85° approach angle and 3.97 mm plate thickness combine to deliver robust engagement with the workpiece while the 0.8 mm corner radius balances edge strength with form accuracy. Correct seat geometry and a compatible tool body are essential for the intended performance; the system comprises the milling body, the insert, the clamping screw and, where applicable, a backing pad. Broad milling applications with controlled chip flow The grade and single-side chipbreaker make this insert versatile across typical milling tasks — planing, shoulder cutting, grooving, high-feed and contouring — depending on the assigned tool family. The one-sided chip control offers improved evacuation in many operations and reduces the risk of re-cutting. Where a sharp edge and process reliability are demanded simultaneously, the AH120 composition helps maintain a consistent cut edge and surface finish, supporting shorter cycle times and stable dimensional results. Practical advantages for production environments Using indexable inserts reduces downtime and simplifies maintenance: worn cutting edges are replaced quickly without refitting a complete tool. The insert’s parallelogram format and central hole with a single-side countersink (40°–60°) facilitate easy orientation and secure clamping, while the PVD-coated surface aids thermal stability at elevated cutting speeds. The system approach—milling body, insert, clamping screw and backing—ensures a compact assembly strategy that supports efficient tool inventory management and predictable process outcomes. For process-specific advice or to request a quotation for the Tungaloy AH120 insert, contact Metav Werkzeuge: info@metav-werkzeuge.com or +49 2822 7131930 — technical consultants are available to verify seat compatibility and recommended cutting data. Technical data Article number: 6816609 SKU: 6816609-Tungaloy Manufacturer SKU: TUN6816609 Manufacturer: Tungaloy Model series: Fräswendeschneidplatten Facts Size: 17 mm Thickness: 3.97 mm Corner radius: 0.8 mm Approach angle: 85° Relief / free angle: 15° Countersink angle: 40°–60° Special features PVD-coated carbide grade AH120 Parallelogram plate form Cylindrical hole with one-sided countersink One-sided chipbreaker Designed for milling applications System composition: milling body, insert, clamping screw (and backing where required) FAQ Is this insert compatible with non-Tungaloy milling bodies? The insert is designed for Tungaloy milling systems; the seat geometry, insert form and milling body must be technically compatible to ensure correct clamping and performance. Which materials is this AH120 grade best suited to machine? The AH120 PVD-coated carbide grade was developed for wear- and chipping-resistant milling where a sharp cutting edge and process security are required; it is suitable for a wide range of common milling tasks. How is the insert fixed into the tool body? Fixing is achieved via the central hole and clamping screw within the matching seat; the cylindrical hole with a single-side countersink (40°–60°) ensures secure location and repeatable seating. What is the significance of the 0.8 mm corner radius? A 0.8 mm corner radius provides a compromise between edge strength and the ability to produce accurate contours and features, improving resistance to edge chipping while maintaining form accuracy. Can the insert geometry be used for high-feed milling? Depending on the assigned tool family and body, the insert can be applied to high-feed operations; consult the tool body manufacturer data and recommended cutting parameters for confirmation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.

ADMT 17T308 AH140 Wendeplatten - Tungaloy

Take advantage of the combination of PVD-coated carbide (AH140), a 0.8 mm corner radius and precise 85° geometry for stable, high-quality milling results; compatible with Tungaloy milling systems. Order directly via Metav Werkzeuge or consult the technical team for specification advice. ADMT 17T308 AH140 indexable milling insert — Tungaloy (PVD-coated carbide, 0.8 mm radius) The ADMT17T308 AH140 is an indexable milling insert designed for general milling operations where a sharp cutting edge and process reliability are required PVD-coated carbide AH140 for wear resistance Sharp edge with stable chip control Parallelogram shape, 85° cutting angle One-sided chipbreaker for predictable chips Consistent cutting performance for productive milling The insert delivers consistent performance thanks to its PVD-coated carbide AH140 grade, which combines wear resistance with fracture toughness. In practice, this means longer tool life and fewer interruptions for insert changes, resulting in improved machine uptime. The one-sided chipbreaker promotes controlled chip formation, reducing the risk of built-up edge and maintaining surface quality on the workpiece. For process planners, the combination of coating and substrate provides a reliable baseline for tool-life calculations and cutting-parameter selection. Precision geometry that supports repeatable results The parallelogram profile with an 85° cutting angle and 0.8 mm corner radius gives a balance between strength and edge sharpness. This geometry supports shoulder, slot and contour milling operations depending on the assigned cutter body, while the 15° clearance angle helps reduce rubbing and thermal load. For engineers aiming for repeatable tolerances, the robust form and defined edge radius offer a predictable cutting interface and consistent component finish throughout production batches. Compatibility and system-level benefits These inserts are intended for Tungaloy milling systems and must match the cutter seat, insert geometry and milling body technically. The modular system approach—milling body, insert, clamp screw and, where required, pad—allows quick index changes and minimal inventory complexity across families. Using matching components reduces assembly errors and simplifies reconditioning workflows, supporting lean manufacturing practices and faster changeover routines. Practical advantages for shop-floor application With a 3.97 mm plate thickness and a central hole featuring a cylindrical bore plus a single-side countersink (40°–60°), the insert is straightforward to clamp securely. The design supports high-feed and finishing passes as dictated by the chosen tool family, while the sharp edge makes it suitable for operations where surface quality and dimensional control are important. The robust grade is suitable for general steels and a broad range of materials where a durable, sharp edge is required. Contact Metav Werkzeuge today to specify the ADMT17T308 AH140 indexable insert for the intended milling body; the Metav Werkzeuge technical advisers will recommend matching cutter bodies and cutting data to ensure optimal system performance. Technical data Article number: 6820625 Manufacturer SKU: TUN6820625 Label: ADMT17T308 AH140 Tungaloy-Wendeplatte Core specifications Shape: Parallelogram Size: 17 Thickness: 3.97 mm Corner radius: 0.8 mm Cutting angle: 85° Clearance angle: 15° Hole: with cylindrical hole + single-side countersink (40°–60°) Materials & features Material: Carbide (Hartmetall) Coating / Grade: PVD-coated, AH140 Chipbreaker: one-sided Typical use: Milling (plan, shoulder, slot, high-feed, contour depending on tool family) System components: milling body, indexable insert, clamp screw, possible pad FAQ What applications is this insert suitable for? The ADMT17T308 AH140 insert is suitable for a range of milling operations including plan, shoulder, slot, high-feed and contour milling, depending on the assigned milling-body family. How does the AH140 grade benefit production? AH140 is a PVD-coated carbide grade that offers wear resistance and reliable edge stability; the combination extends tool life and improves process security during milling. Is this insert compatible with non-Tungaloy milling bodies? The insert requires a matching seat, geometry and milling body; compatibility with non-Tungaloy bodies depends on exact seat and clamping specifications. What does the 0.8 mm radius mean for cutting? A 0.8 mm corner radius balances edge strength and sharpness, helping to achieve good surface finish while resisting chipping during interrupted cuts. Does the insert require a specific clamp or screw? The insert is part of a system including the milling body, clamp screw and possibly a pad; correct clamping hardware and torque are essential for safe, repeatable performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.

ADMT 17T308 T3130 Wendeplatten - Tungaloy

Benefit from the combination of T3130 wear resistance and a 0.8 mm corner radius for stable cutting and consistent surface finish; order directly via Metav Werkzeuge or consult our advisors for application guidance. ADMT 17T308 T3130 – Indexable milling insert for milling (Tungaloy) ADMT 17T308 T3130 is an indexable milling insert engineered for productive milling tasks within compatible Tungaloy tool families T3130 grade for wear resistance and toughness Parallelogram shape, 17 mm size 0.8 mm corner radius for improved finish Cylindrical hole with 40°–60° countersink Consistent machining performance through optimised grade and substrate The insert uses the T3130 grade on a carbide substrate to deliver a dependable balance of wear resistance and toughness. This combination reduces flank wear under mixed cutting conditions and helps maintain a stable cutting edge over longer tool lives, which translates into fewer interruptions for tool change and more predictable cycle times. The engineering behind the grade aims to support a wide range of milling operations while preserving edge stability under varying feed and speed regimes, so process reliability is improved without complex parameter changes. Precision geometry for improved surface quality and chip control A parallelogram form and a 0.8 mm corner radius produce a controlled engagement with the workpiece, supporting repeatable surface finishes and edge strength. The insert’s seating geometry must match the tool body to ensure correct rake and clearance; the geometry provides an 85° approach and a 15° relief angle for predictable chip formation and reduced vibration in many milling scenarios. The single-sided chipbreaker helps moderate chip thickness and evacuation, which is especially useful on interrupted cuts or varied engagement patterns, contributing to consistent part quality. Fast integration into modular milling systems and straightforward mounting Designed for use in Tungaloy milling systems, the insert features a cylindrical hole with a 40°–60° countersink to secure the insert with a clamping screw and, where required, a supporting shim. The system composition — comprising the milling body, the indexable insert, clamping screw and possibly a backing plate — ensures repeatable seating and simple replacement during maintenance cycles. Correct matching of seat, geometry and body is crucial; the modular approach enables quick insert indexing, reducing downtime and supporting higher overall equipment effectiveness. Reliable in varied milling tasks with a focus on productivity The insert is intended for face, shoulder, slot, high-feed and contour milling depending on the chosen tool family. The combination of robust substrate, T3130 coating behaviour and chip control supports stable cutting in many everyday production tasks, promoting improved throughput and tool-life consistency. For manufacturers aiming for reproducible results and low process variability, this solution provides a practical balance between performance and versatility while remaining compatible with established milling tool systems. Contact Metav Werkzeuge for application-specific selection and availability of the Tungaloy ADMT17T308 T3130 indexable milling insert and for swift technical advice Technical data Article number: 6853805 Manufacturer SKU: TUN6853805 Seller SKU: 6853805-Tungaloy Series: Indexable milling inserts Manufacturer: Tungaloy Facts Corner radius: 0.8 mm Insert size: 17 mm Plate thickness: 3.97 mm Approach angle: 85° Relief (free) angle: 15° Special features Material: Carbide Grade: T3130 Shape: Parallelogram With hole: yes Hole style: cylindrical hole + one-side countersink (40°–60°) Chipbreaker: single-sided Intended application: milling Typical uses: face, shoulder, slot, high-feed, contour milling System composition: milling body, indexable insert, clamping screw, possible shim FAQ Which milling operations is this insert suited for? The ADMT17T308 T3130 indexable milling insert is suitable for face, shoulder, slot, high-feed and contour milling when used in the matching Tungaloy tool family. What is the insert made from and what does the T3130 grade provide? The insert is made from carbide; the T3130 grade provides a balanced combination of wear resistance and toughness for extended edge stability during milling. What mounting and geometric features ensure secure clamping? Secure clamping is achieved via the cylindrical hole with a one-side countersink (40°–60°); the parallelogram form and correct seat geometry of the tool body ensure consistent rake and clearance. What corner radius and angles does the insert offer? The insert features a 0.8 mm corner radius, an 85° approach angle and a 15° relief angle to support surface finish and controlled chip formation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.

ADMT 210408 AH120 Wendeplatten - Tungaloy

The PVD‑coated AH120 grade and the precise 0.8 mm corner radius deliver a balance of sharp cutting action and process stability for milling operations; the ADMT series design ensures secure clamping and predictable chip control. Order the insert directly via Metav Werkzeuge or consult the technical team for application-specific recommendations. ADMT 210408 AH120 – Milling indexable insert by Tungaloy, parallelogram form, 0.8 mm radius ADMT 210408 AH120 is an indexable insert designed for Tungaloy milling systems, optimised for face, shoulder, slot, high‑feed and contour milling tasks. Parallelogram form for versatile milling PVD-coated cemented carbide AH120 Cylindrical hole with single-side countersink Sharp edge and process-secure performance Engineered geometry for consistent cutting performance The ADMT210408 AH120 insert combines a parallelogram plate form with a 0.8 mm corner radius and a precisely ground relief to generate a stable cutting edge that supports predictable chip formation and consistent surface finish. The PVD‑coated cemented carbide substrate provides a balance between hardness and toughness, meaning fewer interruptions for edge refurbishment. For practical terms, this geometry reduces vibration in interrupted cuts and improves repeatability across batches, which translates into higher uptime and more consistent component quality. Compatibility and secure clamping for production environments Designed for use in Tungaloy milling systems, the insert must be used with a matching seat and clamping arrangement: the system typically comprises the milling body, indexable insert, a clamping screw and, if required, a backing shim. The plate includes a cylindrical hole with a single‑side countersink (40°–60°) to ensure reliable axial and radial location, while the parallelogram shape offers cutting edge options suited to different tool families. Typical applications include face milling, shoulder milling, slot milling, high‑feed milling and contour milling, where the geometry supports flexible tool set‑ups and reduces the need for multiple specialised inserts. Durability, process security and efficient machining The AH120 grade is a wear‑ and breakage‑resistant option formulated for milling, providing a sharp cutting edge and enhanced process security in general production work. The PVD coating contributes to reduced adhesion and thermal wear, helping to extend effective tool life and maintain dimensional accuracy over longer runs. For production managers, this means fewer tool changes, lower scrap risk and improved productivity; for operators, it delivers confidence in repeatable performance and surface quality. Metav Werkzeuge can advise on matching insert geometry to the chosen milling body to maximise tool life and machining economy. Contact Metav Werkzeuge for tailored application advice on Tungaloy ADMT210408 AH120 inserts and to arrange supply or technical guidance; eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 Technical Data Article number: 6816610 SKU: 6816610-Tungaloy Manufacturer SKU: TUN6816610 Model series: Milling indexable inserts Type designation: ADMT210408 Facts Corner radius: 0.8 mm Thickness: 4.76 mm Inscribed circle / size: 21 mm Included angle: 85° Clearance angle: 15° Countersink angle: 40°–60° Special features PVD‑coated cemented carbide Grade AH120 One‑sided chipbreaker Parallelogram plate form With cylindrical hole and single‑side countersink For face, shoulder, slot, high‑feed and contour milling Requires matching seat, geometry and milling body for correct assembly FAQ What is the primary advantage of the ADMT210408 AH120 insert? The ADMT210408 AH120 insert (Tungaloy milling indexable insert, SKU 6816610‑Tungaloy) provides a sharp cutting edge with wear‑ and breakage‑resistant performance thanks to the AH120 grade and PVD coating, improving process stability in milling operations. Which milling operations suit this insert? This indexable insert is suited to face milling, shoulder milling, slot milling, high‑feed milling and contour milling, depending on the chosen milling body and assembly. How is the insert clamped in the tool body? Clamping is achieved via the cylindrical hole with a single‑side countersink; the system requires the appropriate clamping screw and, if necessary, a backing shim to match the milling body. Does the insert require a specific tool body? Yes, the insert must be used with a compatible Tungaloy milling body; seat geometry and plate form must technically match to ensure correct locating and secure clamping. What benefits does the AH120 grade and PVD coating provide? The AH120 grade offers enhanced resistance to wear and chipping during milling, while the PVD coating reduces adhesion and thermal degradation, extending tool life and maintaining cutting performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.

ADMT 210408 AH140 Wendeplatten - Tungaloy

Take advantage of the combination of PVD-coated carbide AH140, precise 85° cutting geometry and a secure clamping hole for consistent, repeatable milling results; order the ADMT210408 AH140 insert directly via Metav Werkzeuge or ask the Metav Werkzeuge consultants for application advice. ADMT210408 AH140 ADMT indexable insert for milling – Tungaloy The ADMT210408 AH140 is an indexable milling insert for Tungaloy systems, designed for face, shoulder, slot, high‑feed and contour milling where a sharp cutting edge and process security are required PVD-coated carbide grade AH140 Parallelogram form with 85° cutting angle 0.8 mm corner radius for controlled edge strength Cylindrical hole with single-sided countersink (40°–60°) Longer tool life through optimised coating and grade The combination of a PVD-coated carbide substrate and the AH140 grade delivers enhanced wear resistance and reduced chipping in interrupted or medium-duty milling cycles. The coating reduces adhesive and abrasive wear on the cutting edge, which in turn extends tool life and reduces changeover frequency. For production environments this translates into greater process reliability and fewer unexpected interruptions, helping to keep cycle times stable. Geometry engineered for secure engagement and consistent finishing The parallelogram shape and 85° cutting angle provide a predictable contact geometry with the workpiece, balancing shear conditions and radial engagement. The 0.8 mm corner radius increases edge strength compared with very small radii while still allowing good surface finish; it is particularly effective where a compromise between edge robustness and fine detail is required. The insert’s single‑sided chipbreaker controls chip formation to aid evacuation and avoid built‑up edge, improving repeatability across batches. System integration, flexibility and application scope Designed as part of a full milling system, the insert must be matched with the correct insert seat, cutter geometry and clamping components for full performance. The built‑in cylindrical hole with a single‑sided countersink (40°–60°) ensures secure clamping and repeatable seating, which is essential for high‑precision operations. Typical uses include face, shoulder, slot, high‑feed and contour milling depending on the assigned cutter family; the insert therefore offers flexibility across multiple milling tasks while maintaining process security. Contact Metav Werkzeuge today for guidance on integrating Tungaloy ADMT210408 AH140 inserts into production setups and for availability details — info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: 6820626 Manufacturer SKU: TUN6820626 SKU: 6820626-Tungaloy Designation: ADMT210408 AH140 Model series: Fräswendeschneidplatten Numerical data Cutting angle: 85° Corner radius: 0.8 mm Plate thickness: 4.76 mm Plate size: 21 mm Relief angle: 15° Special features Material: PVD-coated carbide Shape: Parallelogram Chipbreaker: one-sided Hole: cylindrical hole with single-sided countersink (40°–60°) Typical applications: face, shoulder, slot, high‑feed and contour milling System note: insert seat, geometry and cutter body must match FAQ Which milling operations are suitable for this insert? The ADMT210408 AH140 insert is intended for face, shoulder, slot, high‑feed and contour milling when used in compatible Tungaloy milling systems. How does the AH140 grade affect performance? AH140 is a PVD‑coated carbide grade that emphasises wear resistance and breakage control; the grade supports consistent cutting edges under typical milling loads for the specified applications. What effect does the 0.8 mm corner radius have on machining results? A 0.8 mm corner radius increases edge strength and reduces susceptibility to chipping compared with smaller radii, while still permitting a good surface finish when correctly applied. What type of clamping does the insert require? The insert features a cylindrical hole with a single‑sided countersink (40°–60°) to provide secure clamping and repeatable seating in the corresponding cutter body. Can the ADMT210408 AH140 be used in any milling body? The insert is compatible only with bodies that match the ADMT210408 seat geometry; correct matching of insert seat, geometry and cutter body is essential for safe and repeatable operation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.

ADMT 210408 T3130 Wendeplatten - Tungaloy

Combine robust carbide construction, the wear-resistant T3130 grade and a precise 0.8 mm corner radius to secure reliable performance across face, shoulder and high-feed milling. Order the ADMT210408 directly via Metav Werkzeuge or contact our consultants for application advice. ADMT210408 T3130 parallelogram indexable insert for milling by Tungaloy — 0.8 mm radius, with hole ADMT210408 T3130 is an indexable milling insert designed for face, shoulder, slot and high-feed operations within Tungaloy milling systems, offering stable cutting-edge behaviour and reliable chip control. T3130 grade for wear resistance and toughness Parallelogram form for versatile milling operations 0.8 mm corner radius for precise edge definition Cylindrical hole with single-sided countersink (40°–60°) Engineered for consistent chip control and process stability The ADMT210408 combines a carbide substrate with the proprietary T3130 grade to balance wear resistance and edge stability. This balance reduces flank wear and maintains dimensional accuracy over extended tool life, which in turn improves process stability on medium to high-duty milling tasks. The parallelogram shape contributes to favourable cutting geometries for face and shoulder milling, while the single-side chipbreaker geometry supports predictable chip formation and evacuation. These characteristics translate directly into fewer interruptions and higher overall productivity on the shop floor. Secure clamping and geometry compatibility for reliable assembly A secure mechanical interface is essential for repeatable performance: the insert features a cylindrical hole with a single-sided countersink (40°–60°), ensuring secure clamping in compatible tool bodies. The specified 15° relief angle and an 85° approach angle support a broad spectrum of milling tasks without compromising the seating or stability of the insert. It is essential that the insert seat, geometry and milling body are technically matched; correct mating prevents micro-movements that can reduce surface quality and tool life. Clear compatibility ensures predictable results across varied workpiece materials. Practical benefits for diverse milling applications This insert is suited to planing, shoulder, slot and contour milling as determined by the chosen tool family. The defined 0.8 mm corner radius provides a good compromise between strength and detail, helping to maintain corner integrity while allowing fine edge finishes where required. The insert thickness and parallelogram form enable flexibility in cutter design, permitting the same grade to be employed across several operations, thereby simplifying tooling inventories and supporting quicker changeovers and consistent part quality. Material suitability and handling recommendations Selected for general milling use, the grade complements the geometry to enhance chip control and cutting-edge robustness. The insert is manufactured from carbide and intended for use in Tungaloy milling systems; combination with matching cutter bodies is required for optimal results. When replacing inserts, ensure correct torque on the clamping screw and verify seating surfaces for cleanliness to preserve the intended performance and service life. Proper mounting and verified compatibility contribute directly to reduced downtime and improved machining repeatability. For reliable, long-lasting milling performance with Tungaloy technology, request the ADMT210408 T3130 through Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 for technical guidance and ordering assistance Technical Data Article number: 6853806 Manufacturer SKU: TUN6853806 Model series: Fräswendeschneidplatten Material: Carbide Facts Corner radius: 0.8 mm Plate size: 21 mm Plate thickness: 4.76 mm Relief angle: 15° Approach angle: 85° Special features Grade: T3130 Shape: Parallelogram Hole: cylindrical hole with single-sided countersink (40°–60°) Chipformer: one-sided Application: Milling (face, shoulder, slot, high-feed, contour) FAQ What milling operations is this insert suitable for? The ADMT210408 T3130 indexable insert by Tungaloy is designed for face, shoulder, slot, high-feed and contour milling depending on the selected cutter family. Does the insert require a specific tool body? The insert must be used in a tool body with matching seat geometry; the ADMT210408 requires compatible Tungaloy milling bodies to ensure correct seating and clamping. Which material is the insert made from and what advantages does it offer? Manufactured from carbide and supplied in the T3130 grade, the ADMT210408 offers a balance of wear resistance and toughness for longer tool life and stable cutting-edge performance. What does the hole style mean for clamping? The cylindrical hole with a single-sided countersink (40°–60°) ensures secure clamping and correct axial positioning when used with the appropriate clamping screw and cutter body. What does the 0.8 mm corner radius affect in machining? A 0.8 mm corner radius improves corner robustness while allowing acceptable surface finish; it is suitable for many general milling tasks without compromising edge strength. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.

ANMT 09T3PP AH120 Wendeplatten - Tungaloy

Take advantage of the durable PVD-coated AH120 carbide and the precise parallelogram geometry for stable milling with reduced downtime; order directly via Metav Werkzeuge or consult our specialists for application-matched solutions. ANMT 09T3PP AH120 — Tungaloy indexable milling insert, PVD-coated carbide, parallelogram 09 The ANMT09T3PP AH120 is an indexable insert for milling operations, designed for face, shoulder, slot, high-feed and contour milling where a sharp cutting edge and process security are required. PVD-coated carbide AH120 for wear resistance Parallelogram form, 09 size, 85° lead angle Cylindrical hole with 40°–60° countersink Consistent cutting performance through wear-resistant coating The AH120 grade is a PVD-coated carbide developed for milling applications that demand both a sharp cutting edge and reliable chip control. The coating improves surface hardness and resistance to flank wear, which results in longer intervals between index changes and a steadier cutting process. For production environments, this translates into fewer interruptions, more predictable component quality and a better cost-in-use ratio compared with uncoated grades. The combination of substrate and coating supports both finishing passes and more aggressive engagements depending on the tool body used. Secure clamping and precise geometry for repeatability The insert’s parallelogram outline, nominal size 09 and 85° lead angle provide a stable seating and cutting orientation in compatible milling bodies. With a thickness of 3.97 mm, a zero corner radius and a 0° clearance angle, the geometry delivers a defined cutting edge ideal for true-to-form profiling and shoulder work. The feature set includes a cylindrical hole with a single-sided countersink (40°–60°) for positive clamping force and repeatable positioning. When the insert, seat, and cutter body are matched technically, the result is consistent runout behaviour and surface finish across repeated cycles. Flexible application range and controlled chip formation Designed for a variety of milling strategies — from face and shoulder milling to slotting, high-feed and contour operations — the plate features a single-sided chipbreaker that encourages predictable chip flow for one-sided cutting directions. The material and chipbreaker design reduce the risk of built-up edge and improve process stability in mixed production runs. Because the indexable system comprises the milling body, insert, clamping screw and, where required, a shim, it is important that all components are compatible; correctly matched assemblies exploit the insert’s strengths for efficient metal removal and repeatable finishes. Practical purchasing and in-process considerations The insert is supplied as part of Tungaloy’s milling system family and must be paired with a matching cutter body for correct function. The item is catalogued under manufacturer article number 6800918 and manufacturer SKU TUN6800918, enabling simple stock management and reorder processes. For shops aiming to reduce setup time, keeping a ready supply of AH120 inserts allows quick replacement during planned tool changes, improving machine uptime. Where special cutting parameters are required, technical support can advise on the optimal insert orientation, clamping torque and cutter family pairing to ensure the best life and surface quality. Contact Metav Werkzeuge for tailored application advice on the ANMT 09T3PP AH120 indexable milling insert; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitable cutter bodies and procurement options Technical Data Article number: 6800918 Manufacturer SKU: TUN6800918 Our SKU: 6800918-Tungaloy Numbers / Core technical data Size: 09 Thickness: 3.97 mm Lead angle: 85° Corner radius: 0 mm Clearance angle: 0° Designs / Special features Material: carbide (cemented carbide) Coating / grade: PVD-coated AH120 Plate form: parallelogram Hole: cylindrical hole with single-sided countersink (40°–60°) Chipbreaker: single-sided Typical applications: face, shoulder, slot, high-feed and contour milling System components: milling body, indexable insert, clamping screw, possible shim FAQ What machining tasks is this insert best suited for? The ANMT09T3PP AH120 insert is suitable for face, shoulder, slot, high-feed and contour milling where a sharp, process-secure cutting edge is required. Is the AH120 grade suitable for heavy interrupted cuts? AH120 is a wear- and breakout-resistant PVD-coated carbide designed to maintain a sharp edge and good process security, which supports tougher milling conditions when paired with an appropriate cutter body. How must the insert be mounted to ensure correct function? The insert requires a compatible Tungaloy milling body with matching seat geometry; the system uses a clamping screw and may require a shim to ensure secure and repeatable clamping. What does the zero corner radius mean for finishing work? A corner radius of 0 mm provides a very sharp cutting edge for accurate profiling and tight-radius features, while the PVD coating helps manage wear during finishing passes. Where can the ANMT09T3PP AH120 be ordered or specified? This insert is listed under article number 6800918 and manufacturer SKU TUN6800918; ordering and technical discussion are available via Metav Werkzeuge and their technical advisors. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.