ANMT 09T3PP AH120 Wendeplatten - Tungaloy
Take advantage of a PVD‑coated carbide grade (AH120) and a parallelogram form with precise 85° geometry to secure consistent cutting performance in Tungaloy milling systems; order directly via Metav Werkzeuge or request advice from our consultants for selection and compatibility. ANMT 09T3PP AH120 — Tungaloy indexable milling insert (parallelogram, 3.97 mm, 85°) The ANMT09T3PP AH120 is an indexable milling insert designed for reliable milling operations within Tungaloy milling tool systems, suitable for face, shoulder, slot and high-feed milling. PVD-coated carbide for high wear resistance Designed for Tungaloy milling tool systems Parallelogram form, 3.97 mm thickness Cylindrical hole with single-side countersink Engineered for consistent machining performance The insert is manufactured from carbide and finished with a PVD coating, delivering a balance of wear resistance and edge integrity that is especially useful where a sharp cutting edge and process security are required. The AH120 grade is specified for applications prone to wear and chipping; this composition supports repeatable part quality and reduces unscheduled tool changes. The insert’s geometry—a parallelogram form with an 85° cutting angle—ensures stable engagement with the workpiece and predictable chip flow, which in turn can improve cycle-time consistency on both roughing and finishing passes. Secure seating and simple clamping for production stability Designed to work within matched Tungaloy milling bodies, the indexable insert relies on correct seat geometry and clamping to perform. The cylindrical hole with a single-side countersink (40°–60°) and the defined 3.97 mm plate thickness provide a secure mechanical location once clamped, so the cutting edge is presented consistently from one index to the next. This engineering reduces the risk of misalignment and supports stable cutting conditions, which is advantageous in batch production or mixed‑batch scenarios where reproducibility matters. Chip control and edge characteristics that aid surface finish The insert’s single-sided chipbreaker design promotes controlled chip formation across a range of milling tasks. When paired with the sharp edge characteristics of the AH120 grade, the result is an improved surface finish on the machined component and reduced tendency for edge breakout under intermittent cuts. For users less familiar with carbide grades, the practical benefit is straightforward: enhanced tool life under typical milling feeds and speeds and fewer machining interruptions due to edge failure. Practical fitment and workshop handling The insert is supplied in a standard ISO arrangement 09T3PP, with a nominal plate size of 09 and a corner radius of 0 for profiling where a small nose radius is desirable. The indexable design allows rapid indexing and replacement, which is helpful for workshop throughput. Given the necessity of matching plate seat, geometry and cutter body, it is recommended to verify compatibility with the intended Tungaloy milling body before integration into a toolset; correct mating will ensure the benefits of the insert are realised on the machine. For process-critical milling applications, choose the Tungaloy ANMT 09T3PP AH120 for durable, sharp-edge performance and contact Metav Werkzeuge for tailored selection support at info@metav-werkzeuge.com or by telephone at +49 2822 7131930 Technical data Article number: 6800913 Manufacturer SKU: TUN6800913 Model series: Milling indexable inserts Facts Thickness: 3.97 mm Cutting angle: 85° Plate size: 09 Corner radius: 0 Relief angle: 0° ISO designation: 09T3PP Special features Material: Carbide Coating: PVD‑coated Grade: AH120 (wear- and chip-resistant) Plate form: Parallelogram Hole: Cylindrical hole + single-side countersink (40°–60°) Chipbreaker: Single-sided Typical applications: Face, shoulder, slot, high-feed and contour milling Compatibility: For use with Tungaloy milling systems (matching seat and geometry required) FAQ What milling operations are best suited to this insert? The ANMT09T3PP AH120 insert is intended for face, shoulder, slot, high‑feed and contour milling when paired with the appropriate Tungaloy milling body. Which materials can the AH120 grade handle effectively? The AH120 PVD‑coated carbide is formulated to offer wear and chip resistance across a broad range of materials typically encountered in milling; the insert is particularly beneficial where a sharp cutting edge and process reliability are priorities. How does the parallelogram form affect tool setup? The parallelogram plate form determines the insert seating and cutting orientation; correct matching of seat geometry in the milling body is required to ensure the ANMT09T3PP AH120 functions as intended. Is the insert suitable for interrupted cuts or unstable conditions? The AH120 grade’s resistance to chipping and the controlled chip formation from the single-sided chipbreaker make this indexable insert suitable for applications that include intermittent engagement, within the limits of recommended cutting data. What identification should be quoted when reordering? When reordering, reference the ANMT09T3PP AH120 Tungaloy indexable insert and article number 6800913 (Manufacturer SKU TUN6800913) to ensure the exact item is supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
ANMT 09T3PP GH330 Wendeplatten - Tungaloy
ANMT 09T3PP GH330 – Wendeplatte zum Fräsen, Tungaloy Die ANMT09T3PP GH330 ist eine Hartmetall-Wendeschneidplatte von Tungaloy für universelles Fräsen in Frässystemen, geeignet für Plan-, Schulter-, Nut- und Konturfräsen. Parallelogramm-Form für stabile Schnittkräfte GH330-Sorte: Ausgewogenes Verhältnis von Zähigkeit und Verschleißfestigkeit Mit Loch und einseitiger Senkung (40°–60°) für sicheren Sitz Plattendicke 3,97 mm für präzise Stabilität Einseitiger Spanbrecher optimiert Spanbildung Produktivität steigern durch optimierte Schneidkantenstabilität Die Wendeschneidplatte überzeugt durch die GH330-Sortenwahl, die gezielt Zähigkeit und Verschleißfestigkeit kombiniert. Dadurch reduziert sich Werkzeugverschleiß bei wechselnden Schnittbedingungen und die Standzeit verlängert sich spürbar. Anwender profitieren von konstanteren Bearbeitungsergebnissen und weniger Rüstunterbrechungen, was die Produktionsrate erhöht und Ausschuss reduziert. Haltbarkeit und Materialauswahl für robuste Bearbeitung Gefertigt aus Hartmetall bietet die Platte dauerhafte Kantenstabilität bei anspruchsvollen Fräsaufgaben. Die Plattendicke von 3,97 mm und die Parallelogramm-Form garantieren mechanische Steifigkeit, die Vibrationen dämpft und die Oberflächengüte verbessert. Der einseitige Spanbrecher sorgt für definierte Spanabfuhr, erklärt und erleichtert den Umgang auch bei schwerspanenden Werkstoffen. Kompatibilität und Einbaubedingungen für Frässysteme Die ANMT-Ausführung verlangt passenden Plattensitz und korrespondierende Fräskörper; die Kombination aus Form, Lochbild und Senkung (zylindrisches Loch + einseitige Senkung 40°–60°) gewährleistet sicheren Sitz und präzise Montage. Mit einem Winkel von 85° eignet sich die Platte für Standard-Winkelgeometrien in modularen Frässystemen und erlaubt vielseitige Einsatzfälle vom Hochvorschub bis zur Konturbearbeitung. Zielgruppe, Anwendungshinweise und Nutzen Entwickelt für Fertiger und Lohnbearbeiter, die prozessstabile Fräsoperationen benötigen, bietet die Platte einfache Einsetzbarkeit in bestehenden Tungaloy-Frässystemen. Anwender erhalten eine wirtschaftliche Lösung für Serien- wie Einzelteilefertigung, die durch weniger Werkzeugwechsel und zuverlässig reproduzierbare Ergebnisse Kosten senkt und Stillstandszeiten minimiert. Empfehlung: Für produktives Plan‑ und Konturfräsen empfiehlt sich die Wahl der ANMT09T3PP GH330 von Tungaloy; bei technischen Fragen steht Metav Werkzeuge gern zur Verfügung, eMail info@metav-werkzeuge.com, Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 6800915 Marke: Tungaloy Serie: Fräswendeschneidplatten Hersteller SKU: TUN6800915 Daten Plattendicke: 3,97 mm Winkel: 85° Plattengröße: 09 Eckenradius: 0 mm Freiwinkel: 0° Besonderheiten Material: Hartmetall Sorte: GH330 Plattenform: Parallelogramm Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Spanbrecher: einseitig Schneidstofftyp: Tungaloy-Schneidstoffsorte FAQ Was bedeutet die Bezeichnung ANMT09T3PP GH330? Die Bezeichnung beschreibt Form und Größe: ANMT steht für die Plattengattung, 09 für die Plattengröße, T3 für die Plattendicke in der Nomenklatur und PP für die Geometrie; GH330 kennzeichnet die Tungaloy-Schneidstoffsorte, die Zähigkeit und Verschleißfestigkeit ausgleicht. Für welche Fräsanwendungen eignet sich die Wendeplatte am besten? Die Platte eignet sich besonders für Plan-, Schulter-, Nut‑ und Konturfräsen sowie Hochvorschuboperationen, abhängig vom eingesetzten Fräskörper und Systemaufbau. Ist die ANMT09T3PP GH330 kompatibel mit anderen Herstellersystemen? Die Platte ist für Tungaloy‑Frässysteme konzipiert; Plattensitz, Geometrie und Fräskörper müssen technisch übereinstimmen, um sicheren Sitz und korrekte Spanführung zu gewährleisten. Wie wirkt sich der einseitige Spanbrecher auf die Bearbeitung aus? Der einseitige Spanbrecher formt kontrollierte Späne, verbessert die Spanabfuhr und reduziert das Risiko von Aufbauschneiden bei schwerspanenden Werkstoffen. Welche Vorteile bietet die GH330‑Sorte im Produktionsalltag? GH330 bietet ein ausgewogenes Verhältnis aus Zähigkeit und Verschleißfestigkeit, was zu längeren Standzeiten, stabiler Spanbildung und gleichmäßigeren Bearbeitungsergebnissen führt. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ANMT 09T3PP T3130 Wendeplatten - Tungaloy
Reliable carbide indexable insert in Tungaloy T3130 grade combines wear resistance and edge stability with a parallelogram geometry and secure clamping; designed for productive milling operations and compatible with Tungaloy milling systems when seat, geometry and cutter body match. Order the insert directly via Metav Werkzeuge or consult the technical advisors for tool-family matching and availability. ANMT09T3PP T3130 ANMT 09T3PP T3130 Milling Insert by Tungaloy The ANMT09T3PP T3130 is a parallelogram-shaped carbide indexable insert for milling applications, intended for use in compatible Tungaloy milling systems. T3130 grade for balanced wear resistance Parallelogram form for versatile milling Cylindrical hole with 40°–60° countersink 85° cutting angle for robust engagement Consistent edge life that stabilises production The Tungaloy T3130 grade is formulated to balance wear resistance and toughness, giving stable performance across mixed milling duties. With a focus on controlled flank wear and durable cutting edges, the insert sustains repeatable component quality in series production. The use of carbide as the base material supports consistent tool life under varying cutting conditions, reducing the frequency of index changes and contributing to predictable machining cycles. System compatibility for reliable clamping and safe operation Successful integration requires that insert seat, geometry and milling body are technically matched; the system approach ensures correct seating and torque transmission. The cylindrical hole combined with a one-sided 40°–60° countersink secures the clamping screw and prevents lateral movement during engagement. When used in the appropriate tool family, the clamping interface provides repeatable positioning and stable cutting dynamics, which supports process reliability and reduces vibration-related wear. Geometry that supports efficient material removal The parallelogram shape and an 85° cutting angle offer robust engagement for a range of milling tasks, from face and shoulder work to contour and high-feed strategies where the cutter family allows. The insert thickness of 3.97 mm and size 09 provide a compact geometry that can be favourable for tight assemblies and multi-tooth cutter layouts. A zero corner radius promotes sharp geometries for slotting and finishing passes when required, while the specified relief angle maintains the intended cutting clearance. Versatile application range with productive chip control Designed for general milling, the insert suits face milling, shoulder milling, slot milling and contour milling, subject to the chosen cutter body and operating parameters. The single-sided chipbreaker geometry supports controlled chip formation and evacuation, improving surface consistency and machining throughput. The overall combination of grade, form and hole style enables broad material coverage and productive metal removal in diverse workshop and production environments. Contact Metav Werkzeuge to specify the ANMT09T3PP T3130 for the production setup, request technical matching to existing cutter bodies or check current stock and delivery options Technical data Article number: 6853807 Manufacturer item number: 6853807 SKU: 6853807-Tungaloy Manufacturer SKU: TUN6853807 Facts Thickness: 3.97 mm Size: 09 Cutting angle: 85° Corner radius: 0 mm Relief angle: 0° Special features Parallelogram shape Carbide material Grade: T3130 Single-sided chipbreaker Cylindrical hole with one-sided countersink (40°–60°) Designed for milling; seat and geometry must match Tungaloy milling systems FAQ What is the primary application for this insert? The ANMT09T3PP T3130 is intended for milling operations within compatible Tungaloy milling systems, including face, shoulder, slot and contour milling depending on the cutter family. Which material spectrum is the T3130 grade suitable for? Tungaloy’s T3130 grade provides broad material coverage and a balance of wear resistance and toughness, making the insert suitable for a wide range of common machining tasks when paired with the correct cutting data. How is the insert secured in the milling body? The insert is clamped via a cylindrical hole with a one-sided countersink (40°–60°); correct seating and the matching clamping screw ensure secure fixation and consistent positioning for the ANMT09T3PP insert. What are the key dimensions for selection and setup? Key dimensions are size 09, thickness 3.97 mm, an 85° cutting angle and a corner radius of 0 mm; these values support selection of compatible cutter bodies and clamping hardware (see SKU 6853807-Tungaloy for reference). Is this an original Tungaloy product? Yes, the ANMT09T3PP T3130 is offered as an original Tungaloy indexable insert and is listed under SKU 6853807-Tungaloy for identification and ordering. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
ANMT 1404PP AH120 Wendeplatten - Tungaloy
Benefit from the combination of PVD-coated AH120 carbide and a parallelogram geometry with secure clamping, which delivers stable cutting performance and long tool life for demanding milling tasks. Order the insert directly via Metav Werkzeuge or contact the consultants for tailored advice. ANMT 1404PP AH120 – Tungaloy indexable milling insert for milling, PVD-coated carbide The ANMT1404PP AH120 is an indexable insert engineered for Tungaloy milling systems; it is designed for face, shoulder, slot, high-feed and contour milling where a sharp cutting edge and process security are essential. PVD-coated carbide AH120 for wear resistance Parallelogram form with 85° cutting angle Cylindrical hole with single-sided countersink Consistent edge life through PVD-coated AH120 performance The AH120 grade is a PVD-coated cemented carbide engineered to combine wear resistance with a durable, sharp cutting edge. This composition reduces flank wear and chipping during interrupted cuts, which translates into longer service intervals and more consistent surface finishes. By prioritising such material characteristics, the insert supports predictable process windows and helps maintain throughput in serial milling operations without frequent index changes or rework. Geometry tuned for stability and versatile milling applications A parallelogram-shaped insert with an included angle of 85° and a single-sided chipbreaker offers both axial engagement control and chip formation suited to a variety of milling tasks. The chipbreaker directs chips reliably for face, shoulder, slot, high-feed and contour milling, while the 85° geometry improves clamp stability and allows positive engagement in different cutter bodies. Proper matching of insert seat, geometry and milling body maximises clamping security and repeatability across production batches. Practical dimensions and system compatibility for fast setup The insert is supplied with a cylindrical hole plus a single-sided countersink (40°–60°) to ensure secure fastening with the appropriate clamping screw and support pad. Key dimensions include a plate size of 14 mm and a plate thickness of 4.76 mm, with a corner radius of 0 mm and a free angle of 0°, making it suitable for applications that require a sharp corner definition. Compatibility with the corresponding milling body and clamping components is essential; the system comprises the milling body, the indexable insert, the clamping screw and, where needed, a backing pad. For machining tasks demanding reliable edge life and process security with Tungaloy AH120 inserts, contact Metav Werkzeuge for technical guidance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Manufacturer article number: 6800925 SKU: 6800925-Tungaloy Manufacturer SKU: TUN6800925 Model series: Fräswendeschneidplatten Material: Cemented carbide (PVD-coated) ISO designation: 1404PP Grade: AH120 Shape: Parallelogram Numbers / Core technical data Plate size: 14 mm Plate thickness: 4.76 mm Included angle: 85° Free angle: 0° Corner radius: 0 mm Countersink: 40°–60° Design / Special features Cylindrical hole with single-sided countersink One-sided chipbreaker for controlled chip flow PVD-coated carbide for wear resistance Suitable for face, shoulder, slot, high-feed and contour milling Intended for use in compatible Tungaloy milling systems FAQ What materials can be machined with this insert? The ANMT1404PP AH120 insert is a PVD-coated cemented carbide designed primarily for general milling operations; it performs well on a wide range of materials where a sharp cutting edge and process security are required. How is the insert secured in the milling body? The insert uses a cylindrical hole with a single-sided countersink (40°–60°) and is fixed with the appropriate clamping screw and backing pad as specified for the matching milling body. What does the AH120 grade mean for tool life? AH120 denotes a wear- and fracture-resistant PVD-coated carbide grade; ANMT1404PP AH120 offers extended edge life and reduced risk of chipping under typical milling conditions. Which milling operations is this geometry suited to? The parallelogram form with an included angle of 85° and a one-sided chipbreaker makes the insert suitable for face, shoulder, slot, high-feed and contour milling when used within the matching Tungaloy system. Are the dimensions compatible with standard holders? Dimensions such as 14 mm plate size and 4.76 mm thickness are industry-standard for the specified ISO designation; the insert is compatible with holders and milling bodies that accept ANMT 1404PP profiles. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
ANMT 1404PP AH120 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide AH120 and a precise parallelogram form for consistent, high-productivity milling. Order the ANMT 1404PP AH120 directly via Metav Werkzeuge or ask the consultants for application advice. ANMT 1404PP AH120 — Tungaloy milling indexable insert, PVD-coated carbide, 85° cutting angle ANMT 1404PP AH120 is an indexable insert designed for milling applications in Tungaloy milling systems, offering a wear- and fracture-resistant grade for stable, repeatable machining. PVD-coated carbide AH120 Wear- and fracture-resistant grade Parallelogram form, 14 mm size Cylindrical hole with single-side countersink Consistent cutting performance for demanding milling operations The ANMT1404PP insert delivers process security through a combination of sharp cutting geometry and a robust substrate. The PVD coating enhances surface hardness and reduces adhesion, while the carbide core provides thermal stability and edge strength; together these properties support prolonged tool life and reduced downtime. This makes the insert suitable for planar, shoulder, slot, high-feed and contour milling tasks assigned to matching tool families, where consistent chip control and dimensional repeatability are required. System compatibility that simplifies tool management Designed specifically for Tungaloy milling systems, the insert’s parallelogram shape and centre hole with a single-side countersink ensure correct seating and clamping in approved cutter bodies. Matching insert seat, geometry and cutter body is essential for secure fixation and repeatable performance; improper combinations are to be avoided. The standardised ISO designation and compatible geometries reduce setup complexity and spare-part variance, supporting a lean tooling inventory and faster changeovers on the shop floor. Durable grade and predictable chip control for productivity gains The AH120 grade is a wear-resistant, fracture-resistant formulation optimised for milling where a sharp cutting edge and stable cutting action are demanded. The one-sided chipbreaker is tuned to the insert geometry to promote controlled chip formation across a range of feeds and depths of cut. As a result, material removal rates can be maintained with lower risk of unexpected edge failure, improving overall productivity and yielding a more consistent surface finish in serial production. Selection and handling advice to maximise return on tool investment When selecting this type of insert, check the cutter body for matching seat geometry and ensure the clamping screw and any required shim are specified for the system. The insert’s 85° cutting angle and 0° clearance make it suited to general-purpose and finishing passes depending on the tool family. For best results, follow the tool-maker’s recommended cutting data and replace inserts at the first signs of edge chipping to preserve workpiece quality. Correct storage and handling will also help retain the integrity of the PVD coating and the cutting edge. Discuss your application with Metav Werkzeuge and specify the ANMT 1404PP AH120 for reliable milling performance; Metav Werkzeuge can provide technical guidance and supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6800920 SKU (seller): 6800920-Tungaloy Manufacturer SKU: TUN6800920 Model series: Milling indexable inserts ISO designation: ANMT1404PP Numbers / Core technical data Size: 14 mm Thickness: 4.76 mm Cutting angle: 85° Clearance angle: 0° Corner radius: 0 Countersink angle: 40°–60° Design / Special features Material: carbide Coating: PVD Form: parallelogram Hole: cylindrical hole with single-side countersink Chipbreaker: one-sided Application: milling (plan, shoulder, slot, high-feed, contour depending on tool family) FAQ What materials can be machined with this insert? The ANMT 1404PP AH120 is a PVD-coated carbide insert intended for a broad range of milling tasks; AH120 is optimised for applications requiring a sharp cutting edge and good wear resistance, so it performs well in general steels and mixed-material production where process security is required. Is this insert compatible with any Tungaloy milling body? Compatibility requires matching the insert seat, geometry and clamping system; the ANMT1404PP designation identifies the geometry, but only tool bodies designed for ANMT-type inserts and the corresponding seat should be used. How does the AH120 grade affect tool life? The AH120 grade combines a wear-resistant substrate with a PVD surface layer to reduce edge wear and minimise chipping, which typically extends usable life under stable cutting conditions compared with uncoated alternatives. What is the purpose of the one-sided chipbreaker? The one-sided chipbreaker is designed to control chip flow in the defined cutting directions for this insert geometry, improving chip evacuation and contributing to surface quality and consistent tool forces during milling. Can the insert be used for high-feed milling? High-feed capability depends on the assigned tool family and cutter body; ANMT1404PP inserts can be used in high-feed or conventional milling operations provided the associated milling system and cutting data support the process. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
ANMT 1404PP GH330 Wendeplatten - Tungaloy
Take advantage of GH330's balanced wear resistance and edge stability combined with precise seating dimensions for consistent milling performance; order through Metav Werkzeuge or consult our specialists to confirm compatibility with the intended cutter body. ANMT 1404PP GH330 indexable insert for milling — Tungaloy A ANMT1404PP GH330 Tungaloy indexable insert designed for versatile milling tasks including face, shoulder, slot, high‑feed and contour operations when matched to the correct cutter body GH330 carbide grade for wear resistance Parallelogram form for rigid seating Cylindrical hole with 40°–60° countersink 14 mm size with 4.76 mm thickness for accurate fit Longer tool life through a balanced carbide grade The supplied grade GH330 is a Tungaloy‑developed carbide that combines wear resistance with controlled toughness to maintain cutting edge integrity over longer cycles. This balance reduces the frequency of insert changes and stabilises the machining process, resulting in more consistent component tolerances. In practice, the choice of grade supports productive milling across a broad range of materials, while the engineered edge stability helps to avoid unexpected edge chipping during interrupted cuts. Precision seating and geometry for reliable machining Designed as a parallelogram‑shaped insert with a cylindrical fixing hole and a one‑sided countersink (40°–60°), the component ensures repeatable clamping and alignment in compatible milling bodies. The insert measures 14 mm across with a thickness of 4.76 mm and features an 85° approach inclination, delivering a stable contact interface and predictable chip flow. These dimensional details translate directly into improved run‑out behaviour and consistent surface quality when the insert seat, geometry and cutter body are matched correctly. Chip control and application flexibility Equipped with a single‑sided chipbreaker, the insert is tailored to promote effective chip formation and evacuation in many milling scenarios. The zero corner radius supports precise profile generation and fine finishing where a defined cutting outline is required. Depending on the assigned tool family, the insert is applicable for face, shoulder, slot, high‑feed and contour milling, offering a flexible solution for shops that require a single grade to cover multiple operations. Compatibility guidance and installation considerations This indexable component is intended for use within Tungaloy milling systems; therefore, insert seat, geometry and cutter body must be technically compatible for safe and efficient operation. The central hole and countersink arrangement require matching clamping screws and seat designs to achieve the promised stability. When integrating the insert into a tooling system, verify the cutter family and clamping torque to secure the seating and preserve the cutting edge life promised by the GH330 grade. For application verification and stock or technical enquiries regarding the ANMT1404PP GH330 insert from Tungaloy, contact Metav Werkzeuge for tailored advice and compatibility checks — info@metav-werkzeuge.com · +49 2822 7131930 Technical Data Article number: 6800922 Manufacturer SKU: TUN6800922 Full article name: ANMT1404PP GH330 Tungaloy indexable insert Manufacturer: Tungaloy Material: Carbide Numbers / Core Technical Data Insert size: 14 mm Thickness: 4.76 mm Approach/angle: 85° Corner radius: 0 mm Relief/clearance angle: 0° Countersink angle: 40°–60° Designs / Special features Parallelogram insert form Cylindrical hole with one‑sided countersink Single‑sided chipbreaker Carbide grade GH330 for balanced wear/toughness Compatible with Tungaloy milling systems when seat and geometry match technical requirements FAQ What materials is this insert suitable for? The GH330 grade is formulated for general milling and offers a broad workpiece coverage; it performs well across many steels and common materials used in milling operations. How does the single‑sided chipbreaker affect machining? The single‑sided chipbreaker on the ANMT1404PP GH330 promotes controlled chip formation and evacuation, which aids surface finish and reduces the risk of built‑up edge under typical milling conditions. Is the insert ready for use in any milling body? The insert will function only when the insert seat, geometry and cutter body are technically compatible; correct matching to the Tungaloy milling system is essential for safe clamping and reliable performance. What does the zero corner radius mean for finishing? A corner radius of 0 mm allows for exact profile reproduction and sharper transitions during finishing passes, making the insert suitable where defined edges are required. Which product identifiers should be used when ordering? Reference the manufacturer article number 6800922 or the manufacturer SKU TUN6800922 together with the designation ANMT1404PP GH330 to ensure correct supply. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
ANMT 1404PP T3130 Wendeplatten - Tungaloy
Take advantage of the combination of Tungaloy's wear-resistant grade and a compact parallelogram geometry for reliable edge stability and long tool life; order directly via Metav Werkzeuge or consult our technical advisors for verification of seat and toolbody compatibility. ANMT 1404PP T3130 indexable insert for milling — Tungaloy ANMT1404PP T3130 as an indexable insert designed for milling applications, compatible with Tungaloy milling systems when seat, geometry and body are matched. Optimised Tungaloy grade T3130 Parallelogram form, 14 mm size Cylindrical hole with one-sided countersink One-sided chipbreaker for controlled swarf Durable grade for extended cutting cycles The insert is manufactured in a T3130 carbide grade developed by Tungaloy to balance wear resistance and toughness for milling operations. This composition maintains a stable cutting edge under intermittent loads and varying cut depths, which reduces the frequency of tool changes and supports higher machine utilisation. The design is intended to deliver consistent performance across face, shoulder and contour milling tasks, helping production planners to maintain cycle-time targets and predictable tool-life forecasts. Geometry that improves stability and chip control A parallelogram-shaped insert with a nominal size of 14 mm and a plate thickness of 4.76 mm provides a compact seating area that contributes to low-vibration cutting when correctly clamped. The insert features a cylindrical hole with a one-sided countersink (40°–60°) and an approach/lead angle of 85°, which together ensure secure fastening and reliable axial location in compatible tool bodies. The one-sided chipbreaker aids in producing predictable swarf flow and surface finish, while the zero corner radius and 0° relief are suited to precise profiling and finishing passes. Efficiency gains through consistent surface quality Using a purpose-designed grade and geometry enables more parts to be completed within the same tool-life window, improving overall machining economy. The combination of edge stability and chip control translates into fewer reworks and more uniform part tolerances, which is particularly relevant for production runs where surface quality and repeatability matter. Typical applications covered include face milling, shoulder operations, slotting and high-feed machining depending on the chosen cutter family and cutting data. System matching and practical handling advice This insert belongs to a milling indexable insert system; the insert seat, geometry and cutter body must be technically compatible to achieve the specified performance. Correct clamping torque and orientation in the tool body are essential to preserve edge life and prevent fretting. For customers requiring confirmation of toolbody compatibility or cutting data for specific materials, Metav Werkzeuge’s technical consultants can provide application-specific guidance and cutting-parameter suggestions based on machine and material data. Contact Metav Werkzeuge for tailored advice on integrating Tungaloy inserts into production lines; technical checks and matching recommendations are available by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6853808 Manufacturer SKU: TUN6853808 Merchant SKU: 6853808-Tungaloy Type designation: ANMT1404PP Model series: Fräswendeschneidplatten Manufacturer: Tungaloy Facts Size: 14 mm Thickness: 4.76 mm Approach/lead angle: 85° Countersink angle range: 40°–60° Corner radius: 0 mm Relief (free) angle: 0° Special features Material: carbide Grade: T3130 by Tungaloy Shape: parallelogram Hole: cylindrical hole with one-sided countersink Chipbreaker: one-sided Application: milling (face, shoulder, slot, high-feed, contour) System requirement: compatible Tungaloy milling tool body and seat FAQ Is this insert suitable for high-feed milling? The ANMT1404PP T3130 indexable insert is intended for a range of milling tasks including high-feed operations when assigned to a matching cutter family and appropriate cutting data. What material is the insert made from and what are the benefits? The insert is made of carbide in Tungaloy’s T3130 grade, offering a balance of wear resistance and toughness that supports longer cutting cycles and improved edge stability. Which tool bodies will accept this insert? This insert requires a tool body and seat designed for the ANMT-style parallelogram insert form; the seat, geometry and cutter body must be technically matched to the ANMT1404PP designation. Does the insert include a chipbreaker and what effect does it have? Yes; the insert features a one-sided chipbreaker that promotes consistent chip formation and helps achieve predictable surface finish and swarf evacuation in many milling operations. Are there any special clamping recommendations? Secure clamping with the correct torque and proper alignment in the tool body is essential to achieve the performance promised by the ANMT1404PP T3130 insert and to avoid premature wear. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
APMT 070308 AH120 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated AH120 grade and a precise 0.8 mm corner radius for consistent chip control and process security in milling operations; order original Tungaloy inserts via Metav Werkzeuge or request application advice from our consultants. APMT 070308 AH120 indexable milling insert by Tungaloy — PVD-coated carbide, 0.8 mm radius APMT 070308 AH120 is an indexable milling insert designed for use in Tungaloy milling systems; suitable for face, shoulder, slot, high-feed and contour milling where a sharp cutting edge and high process reliability are required. PVD-coated AH120 grade for process security 0.8 mm corner radius for robust edge life Parallelogram form for stable cutting engagement Cylindrical hole with countersink for secure clamping High wear resistance for uninterrupted production The PVD-coated AH120 grade combines a hard, wear-resistant coating with a carbide substrate to deliver extended tool life under interrupted or continuous milling. This composition is aimed at reducing flank and crater wear, which in turn maintains dimensional stability across batches. For production planning, the insert’s material mix means fewer tool changes and more predictable maintenance intervals, supporting a steady machining flow and reduced downtime. Geometry that delivers consistent chip control and surface quality The parallelogram-shaped insert with a 0.8 mm corner radius and single-sided chipbreaker gives a balanced cutting action for both slotting and face milling. The 11° clearance angle helps to avoid rubbing while the 85° approach angle supports robust engagement with the workpiece. These geometrical choices translate into reliable chip evacuation and a repeatable surface finish, particularly where process security and a sharp cutting edge are demanded. Designed for secure clamping and system compatibility The insert features a cylindrical hole with a single-side countersink (40°–60°) to ensure positive seating and repeatable orientation in the cutter body. As part of a Tungaloy system, the seating geometry, plate form and cutter body must match technically; when paired correctly, the assembly—cutter body, insert, clamp screw and possible shim—provides mechanical stability that reduces vibration and improves tool life. Compatibility is therefore as important as the insert’s own properties for achieving the envisaged productivity. Practical application scope and user benefits Intended for various milling tasks — face, shoulder, slot, high-feed and contour operations — the insert supports flexible workshop use and is particularly suitable when a sharp cutting edge and chipping resistance are required. The 3.18 mm thickness and size designation 07 give a compact yet robust profile for many cutter families. For less experienced users, the technical design means straightforward handling: correct seat and clamp torque yield predictable performance, while the grade’s resistance to chipping reduces the risk of sudden insert failure. Contact Metav Werkzeuge for tailored application advice on Tungaloy AH120 inserts or request a quotation using SKU TUN6816611 via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6816611 Manufacturer SKU: TUN6816611 SKU: 6816611-Tungaloy Model series: Fräswendeschneidplatten Facts Material: carbide Coating / grade: AH120 (PVD-coated) Corner radius: 0.8 mm Thickness: 3.18 mm Size: 07 Clearance angle: 11° Approach angle: 85° Special features Parallelogram plate form Cylindrical hole with single-side countersink (40°–60°) Single-sided chipbreaker Designed for Tungaloy milling systems Typical applications: face, shoulder, slot, high-feed and contour milling Sharp cutting edge with wear- and chipping-resistant grade FAQ What applications is the APMT 070308 AH120 best suited for? The APMT 070308 AH120 indexable milling insert is designed for face, shoulder, slot, high-feed and contour milling; the AH120 grade supports operations where a sharp edge and process reliability are required. Which cutter systems are compatible with this insert? Compatibility requires a matching plate seat, geometry and cutter body; the insert is intended for use in Tungaloy milling systems and is secured via the cylindrical hole and countersunk seating. How does the AH120 grade affect tool life? The PVD-coated AH120 grade improves wear and chipping resistance, extending predictable tool life and reducing unplanned changes in continuous or interrupted milling. What clamping features ensure secure seating of the insert? The cylindrical hole combined with a single-side countersink (40°–60°) provides positive seating and repeatable orientation, supporting secure clamping and reduced vibration in the cutter assembly. Which SKU should be referenced when ordering or enquiring? Please refer to SKU TUN6816611 or article number 6816611 when requesting quotes or technical information about the APMT 070308 AH120 insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
APMT 070308 AH140 Wendeplatten - Tungaloy
Take advantage of the combination of wear-resistant PVD coating, precise corner radius and simple system compatibility for dependable milling performance. Order directly via Metav Werkzeuge or consult our specialists for application-specific setup and process optimisation. APMT 070308 AH140 – Indexable milling insert for Fräsen by Tungaloy APMT 070308 AH140 is an indexable milling insert designed for use in Tungaloy milling systems; suitable for face, shoulder, slot, high-feed and contour milling where process reliability and a sharp cutting edge are required PVD-coated carbide grade AH140 One-sided chipbreaker for controlled chips Corner radius 0.8 mm for repeatable geometry Cylindrical hole with single-side countersink Process-secure cutting with long tool life The PVD-coated carbide grade AH140 provides a balance of wear resistance and edge stability that supports uninterrupted production. Designed as a replaceable indexable insert for milling, the grade is formulated to resist flank wear and chipping under common milling loads. This results in fewer tool changes and more consistent cycle times, which is particularly valuable in batch production and continuous machining environments. The combination of coating technology and substrate hardness contributes directly to improved process reliability and predictable tool life. Geometry engineered for consistent surface quality A corner radius of 0.8 mm combined with a 3.18 mm plate thickness and an effective 11° clearance delivers reproducible part geometry and surface finish. The parallelogram insert form provides positive cutting engagement and stable seating in compatible cutter bodies, while the one-sided chipbreaker assists in controlled chip formation for typical milling operations. These geometric parameters help maintain tolerance adherence across repeated indexing and are particularly useful when a sharp cutting edge and predictable scallop heights are required. System compatibility and secure clamping for efficient handling The insert is supplied with a cylindrical hole and a single-sided countersink (40°–60°) that ensures reliable clamping and straightforward orientation in Tungaloy milling bodies. Because insert seat, geometry and cutter body must match technically, this indexable design simplifies replacement and inventory management when a family of compatible cutter bodies is used. The overall package supports quick changeovers, reduced downtimes and a rationalised tooling strategy for production shops seeking both economy and performance. For application advice or to source APMT 070308 AH140 inserts for robust milling performance, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and availability Technical data Article number: 6820627 Manufacturer SKU: TUN6820627 SKU: 6820627-Tungaloy Manufacturer: Tungaloy Facts Plate size: 07 Plate thickness: 3.18 mm Corner radius: 0.8 mm Clearance angle: 11° Main angle: 85° Hole: with hole Countersink: cylindrical hole + single-side countersink (40°–60°) Special features PVD-coated carbide, grade AH140 One-sided chipbreaker Parallelogram plate form Compatible with Tungaloy milling systems Designed for face, shoulder, slot, high-feed and contour milling FAQ What applications suit this insert best? This indexable milling insert is intended for milling operations such as face, shoulder, slot, high-feed and contour milling; the APMT 070308 AH140 insert by Tungaloy offers process security and edge stability for those tasks. Is the insert compatible with standard Tungaloy cutter bodies? Yes, compatibility is ensured when the insert seat, geometry and cutter body are technically matched; the APMT 070308 AH140 is intended for use within Tungaloy milling systems and requires the corresponding cutter family. How does the AH140 grade affect tool life? The AH140 PVD-coated grade provides improved wear resistance and reduced chipping, which typically extends tool life and offers more consistent cutting performance compared with uncoated substrates. What role does the chipbreaker play in performance? The one-sided chipbreaker promotes controlled chip formation and evacuation, reducing the risk of clogging and helping to maintain stable cutting conditions during interrupted and continuous cuts. Can this insert be used for high-feed milling? Yes; the insert is suitable for high-feed operations depending on the assigned cutter family and the specific machining parameters employed. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
APMT 070308 GH330 Wendeplatten - Tungaloy
The GH330 carbide grade combined with a 0.8 mm corner radius delivers a robust balance of wear resistance and edge stability for efficient milling; the parallelogram form and cylindrical hole ensure repeatable seating and secure clamping. Order genuine Tungaloy inserts directly via Metav Werkzeuge or consult our advisors for selection support. APMT 070308 GH330 — Indexable milling insert for milling, Tungaloy APMT070308 GH330 is an indexable milling insert designed for face, shoulder, slot, high-feed and contour milling where matching insert seat and geometry is required GH330 grade for long wear resistance Parallelogram form for stable seating 0.8 mm corner radius for edge stability Cylindrical hole with 40°–60° countersink Productivity through balanced material properties The GH330 grade is engineered as a carbide solution that balances wear resistance, toughness and edge stability, making it suitable for a wide range of milling tasks. Because the cutting material combines hardness with controlled toughness, the insert maintains cutting-edge integrity under intermittent loads; this leads to more consistent component quality and fewer insert changes. The design supports productive machining strategies such as face and shoulder milling while helping to reduce unscheduled downtime. Secure clamping and geometry for reliable machining The parallelogram plate form and the cylindrical hole with one-sided countersink (40°–60°) provide mechanical stability in the toolholder and promote accurate seating of the insert. The combination of seating geometry and the specified 3.18 mm plate thickness reduces micro-movements that can cause premature edge wear. The 85° approach geometry complements medium- to heavy-duty milling passes and supports consistent chip evacuation when paired with the one-sided chipbreaker, improving surface finish and process reliability. Application scope and handling advantages Intended specifically for milling, the insert is compatible with Tungaloy tool families when insert seat, geometry and clamping match. Typical uses include planing, shoulder work, slotting, high-feed and contour tasks depending on the chosen cutter body. The 0.8 mm corner radius helps to protect the cutting edge during interrupted cuts and when engaging variable cross-sections, providing a compromise between edge strength and the ability to produce sharp contours. Handling is straightforward: identify the matching cutter body and fastening hardware, align the insert in the seat and clamp securely using the specified screw and seating components. For expert advice on selecting the right Tungaloy GH330 inserts and to source the APMT 070308 GH330 directly, contact Metav Werkzeuge via info@metav-werkzeuge.com or by phone at +49 2822 7131930 — our consultants will help match the insert to the correct milling body and application Technical data Article number: 6800927 SKU: 6800927-Tungaloy Manufacturer SKU: TUN6800927 Model series: Fräswendeschneidplatten Shape: Parallelogramm Thickness: 3.18 mm Core specifications ISO designation: 070308 Corner radius: 0.8 mm Clearance angle: 11° Cutting edge angle: 85° Size: 07 Hole: with hole Special features Grade/coating: GH330 Material: Carbide Chipbreaker: one-sided Intended use: Milling Hole style: cylindrical hole + one-sided countersink (40°–60°) FAQ What machining tasks is this insert intended for? The APMT070308 GH330 indexable milling insert (Tungaloy, article 6800927) is intended for face, shoulder, slot, high-feed and contour milling when used in a compatible Tungaloy milling system. How does the GH330 grade affect tool life? GH330 provides a balance of wear resistance and toughness; in practice the GH330 grade extends edge life under mixed cutting conditions by improving resistance to flank wear while preserving edge stability. Which holder geometry is required for secure use? A matching Tungaloy milling body with a parallelogram seat that corresponds to the insert geometry and an appropriate clamping screw is required; the cylindrical hole with countersink secures the plate and prevents rotation. Can this insert be used for interrupted cuts? Yes. The 0.8 mm corner radius increases edge strength during interrupted cuts and when traversing variable section thicknesses, reducing the risk of chipping. What chip control can be expected? The one-sided chipbreaker is designed for efficient chip formation in typical milling feeds and contributes to improved surface quality and evacuation when paired with the correct cutter body. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
APMT 070308 T3130 Wendeplatten - Tungaloy
Take advantage of the T3130 grade's wear resistance and the stable parallelogram geometry to increase productivity and component quality; order the insert directly via Metav Werkzeuge or consult our specialists for application matching. APMT 070308 T3130 indexable milling insert by Tungaloy — parallelogram form, 0.8 mm corner radius The APMT070308 T3130 is a precision indexable milling insert for Tungaloy milling systems, intended for face, shoulder, slot, high‑feed and contour milling where matching seat, geometry and cutter body are required T3130 Tungaloy carbide grade for milling Parallelogram insert, stable clamping Cylindrical hole with single-sided countersink 0.8 mm corner radius for robust edges Reliable wear resistance for sustained productivity The T3130 carbide grade is formulated for a balance of wear resistance and toughness, delivering longer tool life in interrupted and continuous milling operations. This characteristic reduces tool changes and standstill times, directly improving line throughput and lowering cost per part. The composition and heat treatment of the grade provide consistent cutting-edge stability so that predictable tool performance supports planning in production schedules. Geometry engineered for secure clamping and controlled chips The parallelogram plate shape combined with a cylindrical hole and single-sided chipbreaker offers secure mechanical clamping and reliable chip formation. The insert's corner radius 0.8 mm and relief angle 11° help maintain edge strength under moderate feeds while enabling stable cutting forces. The countersunk hole (40°–60°) ensures correct seating in compatible cutter bodies, preventing micro-movements that can degrade surface finish and cause premature wear. System compatibility and practical application benefits Designed as part of Tungaloy's modular milling system, this insert integrates with matching cutter bodies, clamping screws and pads; correct pairing is essential for optimal performance. Typical uses include face, shoulder, slot, contour and high‑feed milling depending on the chosen tool family. The 3.18 mm plate thickness contributes to insert rigidity and repeatable positioning, supporting consistent dimensional accuracy and surface quality across batches. Contact Metav Werkzeuge for tailored selection advice on Tungaloy inserts and availability; our technical team can confirm compatibility with the chosen milling body and recommend the best grade and geometry for the application. Technical data Article number: 6853810 SKU: 6853810-Tungaloy Manufacturer SKU: TUN6853810 Manufacturer: Tungaloy Facts ISO designation: 070308 Plate size: 07 Plate thickness: 3.18 mm Corner radius: 0.8 mm Relief angle: 11° Wedge / included angle: 85° Special features Carbide material Grade T3130 Parallelogram plate form Cylindrical hole with one-sided countersink (40°–60°) Single-sided chipbreaker For milling applications: face, shoulder, slot, high‑feed, contour Requires matching cutter body and clamping components FAQ What tool bodies are compatible with this insert? The APMT070308 T3130 indexable milling insert fits cutter bodies designed for parallelogram inserts with a cylindrical hole and single‑side countersink; Metav Werkzeuge can confirm specific body families. Which materials can be machined with this grade? The T3130 grade is formulated for a broad range of steels and castings where a balance of wear resistance and toughness is required; it is suitable for general milling tasks as indicated in the product data. What is the significance of the 0.8 mm corner radius? A corner radius of 0.8 mm on the insert improves edge strength and surface finish in moderate feed conditions, reducing vulnerability to chipping during interrupted cuts. How should the insert be seated to ensure correct performance? Correct seating requires matching plate seat geometry, clamping screw and pad; the cylindrical hole with the specified countersink ensures stable positioning when assembled in the appropriate Tungaloy milling body. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
APMT 09T308 AH120 Wendeplatten - Tungaloy
Take advantage of the PVD-coated carbide AH120 for extended edge life and the 0.8 mm corner radius for consistent surface finish; together these features deliver reliable, process-secure milling. Order genuine Tungaloy inserts directly via Metav Werkzeuge or consult our specialists for matching cutter bodies and seating options. APMT09T308 AH120 — APMT indexable milling insert, PVD-coated carbide for milling — Tungaloy The APMT09T308 AH120 is an indexable insert designed for a range of milling operations, offering a stable cutting edge and suitability for face, shoulder, slot, high-feed and contour milling when used in compatible Tungaloy milling systems. PVD-coated carbide for extended tool life Sharp cutting edge with stable chip control Parallelogram form with 85° approach angle Cylindrical hole with one-sided countersink Consistent high-performance milling through improved edge security The combination of a PVD-coated carbide grade and a wear-resistant substrate ensures sustained performance under repetitive milling loads. The AH120 grade delivers a balance of wear resistance and toughness, reducing the frequency of insert changes and supporting steady production cycles. A sharp cutting edge reduces cutting forces in finishing passes, which improves surface quality and reduces downstream rework. Where process stability is a priority, this insert supports predictable tool life and more economical machining sequences. Precise geometry and clamping for repeatable accuracy Designed as a parallelogram insert with a 0.8 mm radius, the geometry contributes to controlled chip formation and reliable corner strength in shoulder and contour operations. The insert features a cylindrical hole with a one-sided countersink (40°–60°) and a plate thickness of 3.97 mm, all of which are critical for secure clamping and repeatability. The 85° approach angle ensures favourable engagement for many milling strategies, while the 11° clearance angle helps prevent rubbing. Correct seating between insert and cutter body is essential for the rated performance. Flexible application scope with clear system requirements These indexable plates are intended for integration into Tungaloy milling systems; seat, geometry and cutter body must match to achieve the specified benefits. Typical applications include face milling, shoulder milling, slotting, high-feed operations and contouring, with the single-side chipbreaker engineered to aid effective swarf evacuation. The design supports customers seeking both finishing quality and process security, and the insert’s robustness makes it suitable where a sharp edge and reliable performance are required rather than for extreme interrupted cuts. Contact Metav Werkzeuge to specify Tungaloy AH120 inserts for optimised milling setups and to confirm the correct cutter body and seating; e-mail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6816612-Tungaloy Manufacturer SKU: TUN6816612 Manufacturer article number: 6816612 Name: APMT09T308 AH120 Tungaloy insert Core specifications Size: 09 Plate thickness: 3.97 mm Corner radius: 0.8 mm Approach angle: 85° Clearance (relief) angle: 11° Hole style: cylindrical hole + one-sided countersink (40°–60°) Design / Special features Parallelogram plate form Single-side chipbreaker PVD-coated carbide grade AH120 Suitable for face, shoulder, slot, high-feed and contour milling Requires matching milling body, seat and geometry FAQ Which milling operations are suitable for this insert? The APMT09T308 AH120 insert is designed for face milling, shoulder milling, slotting, high-feed and contour milling when installed in a compatible Tungaloy milling body. What is the corner radius and how does it affect finish? The corner radius is 0.8 mm; this radius helps deliver a consistent surface finish while maintaining corner strength during finishing and light-roughing passes. What clamping configuration does the insert require? The insert uses a cylindrical hole with a one-sided countersink (40°–60°) and requires a matching cutter body and clamp to ensure repeatable seating and stable cutting forces. What is the coating and substrate of the insert? This indexable plate is a PVD-coated carbide in grade AH120, combining wear resistance with edge toughness for process-secure milling. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
APMT 09T308 AH140 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide for wear resistance, a sharp cutting edge for process security and a secure clamping geometry to maintain productivity in milling operations. Order the APMT09T308 AH140 indexable insert directly via Metav Werkzeuge or consult our specialists for technical matching. APMT 09T308 AH140 indexable insert for milling — Tungaloy APMT09T308 AH140 Tungaloy-Wendeplatte is an indexable carbide insert designed for a wide range of milling tasks, offering reliable cutting performance in Tungaloy milling systems. PVD-coated carbide for wear resistance Sharp cutting edge for process security Parallelogram shape for versatile milling Cylindrical hole with countersink for secure clamping High wear resistance that sustains production The PVD-coated carbide grade AH140 is formulated to combine wear and chipping resistance, delivering consistent machining performance under varying cutting conditions. The result is improved tool life and fewer interruptions in the production flow, which supports predictable cycle times and reduces unscheduled tool changes. This behaviour is particularly beneficial in serial production where steady output and component quality are priorities. Secure fit and robust clamping for stability Designed with a parallelogram shape and a cylindrical hole with a one-sided countersink, the insert ensures positive seating and repeatable alignment in compatible milling bodies. The 85° wedge angle and the specified relief geometry help maintain cutting stability, reducing vibration and promoting a stable cutting edge during shoulder and contour milling. This mechanical compatibility reduces the risk of insert movement and supports consistent surface finish. Practical geometry for diverse milling tasks A single-sided chipbreaker and the specified geometry make the insert suitable for plan, shoulder, groove, high-feed and contour milling depending on the chosen cutter body. The 3.97 mm thickness combined with a 0.8 mm corner radius helps balance edge strength and dimensional control, allowing the insert to handle interrupted cuts and variable engagement angles while preserving edge integrity and workpiece tolerances. Clear material and application guidance Manufactured from sintered carbide and delivered as a PVD-coated grade, this indexable insert is intended specifically for milling systems where plate seat, geometry and cutter body match are required. The single-sided chip control aids chip flow in many common materials processed in milling, while the insert’s overall design supports efficient, repeatable results in production environments that prioritise process reliability. For technical matching, sample requests or to ensure the APMT09T308 AH140 insert suits a particular cutter body, contact Metav Werkzeuge for expert advice and prompt availability Technical Data Article number: 6820628 Manufacturer SKU: TUN6820628 SKU: 6820628-Tungaloy Item name: APMT09T308 AH140 Tungaloy-Wendeplatte Core specifications Size: 09 Corner radius: 0.8 mm Thickness: 3.97 mm Wedge angle: 85° Relief angle: 11° Features and compatibility Type designation: APMT09T308 Shape: Parallelogramm (parallelogram) Hole: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: one-sided Coating: PVD Material: carbide Application: milling FAQ What materials is this insert suitable for? The APMT09T308 AH140 Tungaloy insert is a PVD-coated carbide grade engineered for general milling; it offers wear and chipping resistance across common materials encountered in milling operations. How does the 0.8 mm corner radius affect performance? A 0.8 mm corner radius provides a balance between edge strength and achievable surface finish, helping to withstand intermittent cuts while maintaining dimensional control. Does the insert require a specific cutter body? The insert must be used in milling bodies that match the plate seat and geometry; the parallelogram shape and hole/countersink design require a compatible Tungaloy-style cutter body for correct seating. What is the purpose of the one-sided chipbreaker? The single-sided chipbreaker directs chip flow for the intended cutting direction, improving chip control and reducing the risk of chip-related surface defects in typical milling operations. Is the coating suitable for high-speed milling? The PVD coating enhances wear resistance and is appropriate for many milling speeds; final cutting parameters should be set according to the workpiece material and machine capabilities. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
APMT 09T308 GH330 Wendeplatten - Tungaloy
APMT 09T308 GH330 Wendeplatte für Fräsen – Tungaloy APMT09T308 GH330 ist eine Wendeschneidplatte zur hochproduktiven Bearbeitung beim Fräsen und wurde für Tungaloy-Frässysteme entwickelt. APMT09T308 GH330 Wendeplatte von Tungaloy Parallelogramm-Form für stabile Auflage Mit zylindrischem Loch und einseitiger Senkung Einseitiger Spanbrecher für sichere Spanabfuhr Eckenradius 0,8 mm für vielseitigen Einsatz Mehr Durchsatz durch stabile Schneidkante Die Wendeplatte überzeugt durch die GH330-Sorte, die eine ausgewogene Kombination aus Verschleißfestigkeit und Zähigkeit liefert. Diese Eigenschaft sorgt für eine stabile Schneidkante und erlaubt konstante Schnittbedingungen auch bei längerem Einsatz, was Ausfallzeiten reduziert. Durch die Parallelogramm-Form entsteht eine sichere Auflage im Fräskörper, was die Prozesssicherheit erhöht und vibrationsbedingte Oberflächenfehler verringert. Präzise Span Kontrolle für bessere Oberflächen Der einseitige Spanbrecher der APMT09T308 führt zu kontrollierten Bruchbildern und verbessert so die Spanabfuhr bei Plan-, Schulter- und Konturfräsen. In Kombination mit dem Eckenradius 0,8 mm ermöglicht die Platte feine Oberflächen ohne unnötige Nachbearbeitung. Für Anwender mit weniger Erfahrung: Ein Spanbrecher ist eine gezielte Geometrie am Schneidrand, die den Span in kleine, handhabbare Stücke bricht und so Kühlschmierstoffeffekt und Bauteilschutz unterstützt. Robustes Material für konstante Standzeiten Gefertigt aus Hartmetall und abgestimmt auf die Tungaloy-Schneidstoffsorte bietet die APMT09T308 eine hohe Widerstandsfähigkeit gegen Verschleiß und thermische Belastung. Die Sorte GH330 ergänzt die Geometrie gezielt um Zähigkeit und Schneidkantenstabilität, was besonders bei wechselnden Schnittbedingungen von Vorteil ist. Anwender profitieren von planbaren Werkzeugwechselintervallen und gleichbleibender Bearbeitungsqualität. Einfache Montage und breite Kompatibilität Die Platte verfügt über ein Loch mit zylindrischer Bohrung und einseitiger Senkung (40°–60°), wodurch die Montage mit Klemmschraube und Unterlage zuverlässig gelingt. Mit Plattendicke 3,97 mm, Plattengröße 09 sowie Freiwinkel 11° passt die APMT09T308 in Fräskörper, die für diese ISO-Bezeichnung ausgelegt sind. Wichtig: Plattensitz, Geometrie und Fräskörper müssen technisch übereinstimmen, damit die volle Leistungsfähigkeit gewährleistet ist. Mit der GH330-Sorte von Tungaloy empfiehlt sich diese Wendeplatte besonders für produktive Fräsaufträge; bei Bedarf übernimmt Metav Werkzeuge die Beratung und Verfügbarkeitsauskunft – per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 6800928 Marke: Tungaloy Serie: Fräswendeschneidplatten Hersteller‑SKU: TUN6800928 Fakten Radius: 0,8 mm Plattendicke: 3,97 mm Plattengröße: 09 Winkel: 85° Freiwinkel: 11° Besonderheiten Material: Hartmetall Sorte: GH330 (Verschleißfestigkeit und Zähigkeit) Schneidstofftyp: Tungaloy‑Schneidstoffsorte Plattenform: Parallelogramm Mit Loch: zylindrisches Loch + einseitige Senkung (40°–60°) Spanbrecher: einseitig ISO‑Bezeichnung: 09T308 (APMT09T308) Anwendung: Fräsen FAQ Ist die APMT09T308 GH330 mit allen Fräsköpfen kompatibel? Die APMT09T308 GH330 passt nur in Fräsköpfe, deren Plattensitz und Geometrie mit der ISO‑Bezeichnung 09T308 übereinstimmen; bei Abweichungen ist ein passender Fräskörper erforderlich. Für welche Fräsaufgaben ist die Wendeschneidplatte geeignet? Die Platte ist ausgelegt für Plan‑, Schulter‑, Nut‑, Hochvorschub‑ und Konturfräsen im Rahmen der zugeordneten Werkzeugfamilie und liefert dort besonders bei produktiven Einsatzbedingungen konstante Ergebnisse. Welche Vorteile bietet die GH330‑Sorte gegenüber Standard‑Sorten? Die GH330‑Sorte kombiniert erhöhte Verschleißfestigkeit mit ausreichender Zähigkeit, was zu stabiler Schneidkante und längeren Standzeiten bei wechselnden Schnittbedingungen führt. Wie beeinflusst der einseitige Spanbrecher die Bearbeitung? Der einseitige Spanbrecher verbessert die Spanform und erleichtert die Spanabfuhr, wodurch Oberflächenqualität und Prozesssicherheit gesteigert werden. Welche Rolle spielt die Loch‑ und Senkgeometrie bei der Montage? Das zylindrische Loch mit einseitiger Senkung (40°–60°) sorgt für präzise Positionierung und sichere Klemmung der Platte auf dem Fräskörper; dadurch sind Wiederholgenauigkeit und Stabilität bei der Bearbeitung gewährleistet. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
APMT 09T308 T3130 Wendeplatten - Tungaloy
Combining T3130 carbide grade, a 0.8 mm corner radius and a parallelogram form gives a reliable balance of wear resistance and cutting-edge stability for diverse milling tasks; order the APMT09T308 insert directly via Metav Werkzeuge or consult our specialists for fitment guidance. APMT 09T308 T3130 milling insert (for milling applications) — Tungaloy APMT09T308 T3130 Tungaloy milling insert provides a robust, parallelogram-shaped indexable cutting solution engineered for face, shoulder, slot, high-feed and contour milling within Tungaloy milling systems. Parallelogram shape for versatile milling T3130 grade for balanced wear resistance Cemented carbide construction for edge stability 0.8 mm corner radius for fine contouring High process reliability and extended tool life The combination of the T3130 grade and cemented carbide substrate delivers consistent wear performance and a stable cutting edge under industrial conditions. The specified grade complements the insert geometry to balance abrasion resistance, toughness and edge stability, which reduces unexpected tool changes and supports continuous production. The single-sided chipbreaker promotes predictable chip flow, helping to maintain surface quality and reduce downtime during long production runs. Precise geometry that improves result consistency A parallelogram profile with an effective 85° cutting angle and 11° clearance provides predictable engagement and chip direction, particularly valuable in shoulder and face milling operations. The insert’s 0.8 mm corner radius helps achieve finer contours without sacrificing stability, while a 3.97 mm plate thickness contributes to rigidity at the cutting edge. For less experienced users, these geometry details mean more repeatable machining results and fewer setup adjustments. Designed for multiple milling tasks with system compatibility Intended for a range of milling operations, the insert suits face milling, shoulder milling, slotting, high-feed and contouring depending on the chosen cutter family. The system is assembled from a cutter body, indexable insert, clamping screw and, when required, a shim; correct matching of insert seat, geometry and milling body is essential for secure clamping and optimum performance. The central hole and the cylindrical hole with single-side countersink (40°–60°) ensure stable fixation and easy indexing during changeovers. Practical handling that supports productivity and economy With standardised indexing and a familiar mounting style, changeovers are fast and straightforward, helping to reduce non-productive time. The balanced properties of the T3130 grade and the controlled chip formation of the one-sided chipbreaker support consistent surface quality, which often leads to fewer reworks and a favourable cost-in-use. The insert’s compatibility with established Tungaloy milling systems and its clear dimensional data make process planning and tool inventory management simpler for production teams. Contact Metav Werkzeuge for detailed compatibility checks and to arrange supply of APMT09T308 inserts; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: 6853811 Manufacturer SKU: TUN6853811 SKU: 6853811-Tungaloy Model series: Indexable milling insert series ISO designation: APMT09T308 Material: cemented carbide Grade: T3130 Facts Corner radius: 0.8 mm Plate thickness: 3.97 mm Cutting angle: 85° Clearance angle: 11° Size: 09 Hole: with hole Hole style: cylindrical hole + single-side countersink (40°–60°) Chipbreaker: one-sided Special features Designed for milling applications Suitable for face, shoulder, slot, high-feed and contour milling (depending on tool family) System requirement: matching insert seat, geometry and cutter body Parallelogram shape for versatile engagement Single-sided chipbreaker for predictable chip control Cemented carbide, grade T3130 for balanced wear and toughness FAQ What types of milling is this insert suitable for? The APMT09T308 T3130 milling insert is specified for face milling, shoulder milling, slotting, high-feed and contour milling, with final suitability depending on the chosen cutter body and tool family. How does the T3130 grade affect performance? T3130 is a Tungaloy grade formulated to balance wear resistance and toughness; in the APMT09T308 insert it promotes stable cutting-edge life and consistent machining under varied milling conditions. What does the parallelogram shape change in machining? The parallelogram shape provides targeted engagement angles that support effective chip evacuation and positional stability, improving repeatability in shoulder and contour operations. Why is the central hole and countersink important? The central hole with a cylindrical bore and single-side countersink (40°–60°) ensures secure clamping and accurate indexing of the insert on compatible Tungaloy cutter bodies. Is any additional component required for assembly? A correct clamping screw and, if specified by the cutter system, a shim are required; the insert must be used with a matching cutter body and seat geometry for secure fixation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
APMT 120408 AH120 Wendeplatten - Tungaloy
Combine the PVD-coated AH120 grade with the 0.8 mm corner radius for stable chip formation and predictable tool life; order directly via Metav Werkzeuge or consult our specialists for application support. APMT 120408 AH120 Milling Insert (APMT) — Parallelogram, PVD-coated carbide — Tungaloy APMT120408 AH120 is an indexable parallelogram insert designed for versatile milling tasks such as face, shoulder, slot and contour milling PVD-coated AH120 for process security 0.8 mm corner radius for accurate profiling Parallelogram form for flexible tool engagement Cylindrical hole with 40°–60° countersink for stable clamping Consistent chip control for reliable cycle times The PVD-coated AH120 grade is a wear- and fracture-resistant carbide designed to deliver process stability during a wide range of milling operations. Its one-sided chipbreaker promotes predictable chip formation, which reduces the risk of chatter and minimizes interruption for manual chip removal. For production environments where repeatability matters, the combined effect of the coating and chip geometry leads to more consistent cycle times and fewer scrap parts. Secure clamping and geometry that reduces setup time A parallelogram plate form with a cylindrical hole and single-sided countersink (40°–60°) provides a secure mechanical interface with the milling body and clamp screw; this design supports accurate seat positioning and reduces micro-movements under load. The insert’s 0.8 mm corner radius helps preserve a sharp cutting edge for profiling while maintaining edge strength for shoulder and slot operations, which shortens changeover and adjustment routines on the machine. Broad application range and predictable tool life Optimised for milling, this indexable plate is suitable for face, shoulder and contour milling as well as high-feed and slot operations depending on the tool family used. The carbide substrate combined with the AH120 coating yields a balance of toughness and wear resistance that maintains surface finish quality across mixed batches of materials. The predictable wear behaviour supports reliable tool-life planning and reduces unplanned downtime in series production. Contact Metav Werkzeuge for technical advice on application, availability and to discuss the best milling configuration for your process at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Manufacturer article number: 6816613 SKU: 6816613-Tungaloy Manufacturer SKU: TUN6816613 Series: Milling indexable inserts Material: carbide Data Corner radius: 0.8 mm Plate thickness: 4.76 mm Size: 12 mm Approach angle: 85° Clearance angle: 11° ISO code: 120408 Special features Coating / grade: AH120 PVD-coated carbide Plate form: parallelogram Hole: cylindrical with single-sided countersink (40°–60°) Chipbreaker: one-sided Typical applications: face, shoulder, slot, high-feed and contour milling System components: milling body, indexable insert, clamp screw, possible shim FAQ What cutting applications is this insert suited for? The APMT120408 AH120 insert is optimised for milling tasks including face, shoulder, slot, high-feed and contour milling in appropriate tool families. Which materials can be machined with the AH120 grade? The AH120 PVD-coated carbide offers a balance of toughness and wear resistance suitable for a broad range of materials where a sharp cutting edge and process security are required. How does the parallelogram form benefit tool setup? A parallelogram plate form permits flexible engagement angles and reliable seating in compatible milling bodies, improving repeatability and reducing setup time. What clamping features ensure stability during heavy cuts? The cylindrical hole combined with a single-sided countersink (40°–60°) provides a secure mechanical interface and stable clamping under load. What identifiers should be used when ordering or specifying this insert? Order using the designation APMT120408 AH120, manufacturer article number 6816613 or SKU 6816613-Tungaloy for clarity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
APMT 120408 AH140 Wendeplatten - Tungaloy
Benefit from the combination of a sharp, process-secure cutting edge and robust PVD-coated carbide for consistent milling performance; the 0.8 mm corner radius and parallelogram form ensure secure clamping and repeatable results. Order the APMT120408 directly via Metav Werkzeuge or consult our specialists if further guidance is required. APMT 120408 AH140 – APMT milling insert for milling (PVD carbide, 0.8 mm radius) by Tungaloy The APMT120408 AH140 is an indexable milling insert developed for versatile milling operations within Tungaloy milling systems, providing a wear-resistant cutting edge where process security and sharp geometry are essential. PVD-coated carbide AH140 for wear resistance 0.8 mm corner radius for precise edge control Parallelogram form for versatile cutter fit Countersunk hole for secure clamping Stable cutting performance for predictable production The combination of PVD coating and a wear-resistant carbide substrate delivers a consistently sharp cutting edge that preserves dimensional accuracy over extended runs. This translates into fewer tool changes and reduced machine downtime, which is especially valuable in high-volume milling. The AH140 grade is designed to balance edge stability with controlled wear, helping to maintain surface quality and minimise rework in serial production. Geometry that simplifies setup and improves repeatability The insert’s parallelogram form and central hole with a one-sided countersink provide secure location and clamping within compatible milling bodies. The 0.8 mm corner radius and an 85° approach angle support controlled chip formation and stable contact under varying cutting forces. These geometric attributes reduce vibration and contribute to repeatable seating, shortening setup times and improving process reliability for face, shoulder, slot and contour milling operations. Process security and broad application within milling systems This indexable plate is part of a system: the cutting body, the insert, the clamping screw and, where applicable, a shim must match technically for optimum performance. The AH140-coated insert is suitable when a sharp cutting edge and process security are required together, offering robust behaviour against chipping and wear. Its single-sided chipbreaker design aids controlled chip evacuation, making the insert a pragmatic choice for mixed-production environments seeking consistent results and fewer interruptions. For tailored recommendations on integrating the AH140 insert into existing tooling or to request technical details, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for direct assistance and ordering support. Technical Data Article number: 6820629 Manufacturer SKU: TUN6820629 External SKU: 6820629-Tungaloy Label: APMT120408 AH140 Tungaloy-Wendeplatte Key measurements Radius: 0.8 mm Plate size: 12 mm Plate thickness: 4.76 mm Approach angle: 85° Relief (clearance) angle: 11° Material & features Material: Carbide (hard metal) Coating / grade: PVD coating, AH140 Shape: Parallelogram Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: single-sided Application: Milling Model series: Milling indexable inserts System composition: milling body, indexable insert, clamping screw, optional shim FAQ What milling tasks is this insert intended for? The AH140-coated APMT120408 is intended for face, shoulder, slot, high-feed and contour milling depending on the selected tool family and compatible milling body. Which cutting performance advantages does the AH140 grade provide? AH140 provides a PVD-coated carbide surface that improves wear resistance and edge stability, helping to maintain surface finish and reduce interruptions during prolonged milling. How does the insert secure to the cutter body? Secure clamping is achieved via the central cylindrical hole and one-sided countersink; this seating design ensures repeatable location and reliable clamping in compatible bodies. Can this insert be used across different milling systems? The insert will perform when the insert seat, geometry and cutter body are technically matched; confirm compatibility of the seat and clamping method before fitting. What role does the corner radius play in cutting? The 0.8 mm corner radius supports precise edge control and helps distribute cutting forces, improving surface quality while reducing the risk of chipping under intermittent or interrupted cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
APMT 120408 GH330 Wendeplatten - Tungaloy
Robust wear resistance from the GH330 grade combined with a secure parallelogram seat and a precise 0.8 mm corner radius ensures consistent milling performance and fewer tool changes; order the insert directly via Metav Werkzeuge or consult our specialists for system compatibility and sizing. APMT120408 GH330 indexable milling insert – parallelogram, 0.8 mm radius (Tungaloy) APMT120408 GH330 Tungaloy indexable insert designed for general milling applications where stable chip control and repeatable seating are required Parallelogram shape for secure clamping GH330 grade for wear resistance 0.8 mm corner radius for versatile machining Cylindrical hole with one-sided countersink Reliable performance for demanding milling tasks The insert combines a Tungaloy carbide composition with the GH330 grade, offering a balance of wear resistance and edge stability suited to face, shoulder, slot, high-feed and contour milling. The integrated one-sided chipbreaker supports controlled chip formation across a range of feeds, reducing the risk of built-up edge and improving surface finish. Where predictable tool life and repeatable results are essential, this indexable insert delivers a measurable increase in production uptime and fewer unscheduled tool changes, which supports cost-effective machining cycles and consistent part quality. Precision geometry that reduces set-up time and enhances stability A parallelogram plate form with a 0.8 mm corner radius and a cylindrical hole with one-sided countersink (40°–60°) ensures exact seating in compatible cutter bodies. The defined thickness of 4.76 mm, main angle of 85° and relief angle of 11° provide a stable contact surface and clear locating datum, which minimises vibration and repeatability errors during operation. Matching the insert to the correct clamping screw and seat avoids misalignment; the system design—comprising the cutter body, the insert, the clamping screw and, where applicable, a shim—must be technically compatible to guarantee the intended clamping force and process stability. Process security and economical operation for series production Specified as part of the milling insert series for Tungaloy systems, the APMT120408 GH330 supports long production runs by combining consistent edge integrity with reliable chip control. The combination of material selection and designed chip evacuation reduces thermal and mechanical wear on the cutting edge, improving average life per index and the number of effective cutting edges per workpiece produced. For operations prioritising throughput and surface quality, this insert contributes to measurable productivity gains and reduced tool consumption, while remaining straightforward to replace and index in standard tooling systems. For GH330 performance and assured process stability, contact Metav Werkzeuge for availability and expert system advice: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6800929 Manufacturer SKU: TUN6800929 SKU: 6800929-Tungaloy Facts Corner radius: 0.8 mm Plate thickness: 4.76 mm Plate size: 12 mm Main angle: 85° Relief angle: 11° ISO designation: 120408 Special features Material: carbide Grade: GH330 (Tungaloy) Plate form: parallelogram Hole: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: one-sided Series: milling indexable inserts Typical application: milling (face, shoulder, slot, high-feed, contour) FAQ What materials can be machined with this insert? The insert is made of carbide in GH330 grade and is designed for general milling tasks; it is suitable for a broad range of materials commonly processed in milling operations, with particular strengths in maintaining edge life under mixed cutting conditions. Is the insert compatible with all Tungaloy milling bodies? Compatibility requires matching the plate seat, geometry and clamping system; the APMT120408 GH330 insert fits Tungaloy milling systems that accept the APMT120408 ISO designation and the specified parallelogram seat. How does the 0.8 mm corner radius affect machining? A 0.8 mm corner radius offers a compromise between strength and detail: it improves edge robustness for interrupted cuts and increases tool life while still allowing reasonably fine contouring compared with larger radii. Does the insert include a chipbreaker and what is its benefit? This grade features a one-sided chipbreaker, which promotes controlled chip fragmentation and evacuation, reducing the chance of long stringy chips and supporting stable cutting conditions at higher feed rates. What is required for a secure clamping and repeatable set-up? Secure clamping relies on a compatible cutter body, the correct clamping screw and, where applicable, a matching shim; the parallelogram form and the countersunk hole ensure consistent seating when the system components are technically matched. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
APMT 120408 T3130 Wendeplatten - Tungaloy
Take advantage of the combination of a proven T3130 carbide grade, precise 0.8 mm corner radius and a secure clamping design to ensure consistently productive milling cycles; order matching inserts directly via Metav Werkzeuge or request application advice from our consultants. APMT120408 T3130 milling indexable insert by Tungaloy — Parallelogram form, 0.8 mm radius APMT120408 T3130 is an indexable milling insert designed for versatile milling tasks; the parallelogram shape and the Tungaloy carbide grade are intended for use in matched Tungaloy milling systems. Tungaloy T3130 grade for stable cutting performance Parallelogram form with 0.8 mm corner radius Cylindrical hole with one-sided countersink Consistent edge life tailored to productive milling The T3130 grade is a Tungaloy carbide formulation developed to balance wear resistance and edge stability, making it suitable for a range of milling operations. With a focus on process reliability, the grade supports repeatable tool life and predictable performance in series production. The result is reduced downtime for index changes and fewer unexpected interruptions during batch runs, which translates directly into increased throughput and lower per-part machining costs. Geometry and clamping that secure cutting stability The insert’s parallelogram form and cylindrical hole with a one-sided countersink (40°–60°) provide a stable seat and positive clamping when used with compatible milling bodies. A 0.8 mm corner radius improves strength at the cutting edge for interrupted cuts and roughing passes, while the 4.76 mm thickness contributes to rigidity under radial load. The combination of these design elements reduces vibration and supports consistent chip formation when assembled in the correct tool body. Application scope and process benefits in daily production Engineered for common milling tasks — face, shoulder and contour milling, as well as slotting and high-feed operations depending on the tool family — this insert enables flexible process planning. The single-sided chipbreaker is oriented to assist controlled chip evacuation in the intended cutting direction, improving surface finish and reducing heat concentration at the cutting edge. For shops aiming to boost productivity, the insert’s predictable behaviour supports higher feeds and longer intervals between index changes, enhancing overall equipment effectiveness. Contact Metav Werkzeuge for tailored advice on matching the APMT120408 T3130 insert to the correct milling body, or request application-specific recommendations and the latest availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Manufacturer article number: 6853812 Manufacturer SKU: TUN6853812 Product SKU: 6853812-Tungaloy Model series: Fräswendeschneidplatten Intended use: Milling Facts Size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 11° Insert angle: 85° Special features Material: cemented carbide Grade: T3130 Shape: parallelogram Hole: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: one-sided Typical applications: face, shoulder, slot, high-feed and contour milling System requirement: matching insert seat, geometry and milling body necessary FAQ What milling tasks are best suited to this insert? The APMT120408 T3130 indexable insert is intended for general milling tasks such as face, shoulder, slot and contour milling; suitability for high-feed operations depends on the matched milling body and tool family. Does the insert require a specific clamping system? Yes — secure and repeatable performance requires a compatible milling body and clamping screw; the insert’s cylindrical hole with countersink is designed for positive seating in standard Tungaloy milling systems. What are the key dimensions to consider when selecting the insert? Important dimensions are the 12 mm size, 4.76 mm thickness and 0.8 mm corner radius; these determine fit, rigidity and the edge strength required for the intended machining task. How does the chipbreaker influence machining? The one-sided chipbreaker supports controlled chip formation in the designated cutting direction, improving surface finish and reducing heat concentration at the edge during milling. Is the grade suitable for serial production with predictable tool life? The T3130 carbide grade is formulated for a balance of wear resistance and edge stability, making the insert a reliable choice for production runs when used with the correct tool body and parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
APMT 120416 AH120 Wendeplatten - Tungaloy
Take advantage of the combination of DoFeed high‑feed geometry, a PVD‑coated AH120 carbide grade and a reliable MJ chipformer for stable, high metal‑removal rates at small axial depths; order the insert directly via Metav Werkzeuge or consult the team for application advice. APMT120416‑MJ indexable insert by Tungaloy — PVD‑coated AH120, 1.6 mm radius APMT120416‑MJ is an indexable milling insert tailored for high‑feed milling, pocketing and face machining, designed to deliver high material removal in shallow axial cuts. DoFeed high‑feed milling family PVD‑coated AH120 carbide grade Parallelogram shape for pocket and face milling 1.6 mm corner radius, cylindrical hole Faster metal removal with DoFeed geometry The DoFeed geometry of this insert is optimised for high‑feed milling, enabling substantial increases in volumetric cutting rates while maintaining small axial depths. The parallelogram plate form distributes cutting loads evenly, which reduces vibration and supports consistent cycle times. In practice, this means shorter machining cycles for pocketing and face operations without the need for deeper cuts, improving throughput on repetitive jobs and enabling more efficient use of machine capacity. Longer edge life and stable process security The AH120 grade is a PVD‑coated carbide developed for wear‑ and chipping‑resistance in milling applications where a sharp cutting edge and process reliability are required. Combined with the MJ chipformer, the insert produces predictable chip shapes that aid evacuation and reduce the risk of edge damage. The result is a reduction in unplanned interruptions and a measurable improvement in component surface finish and repeatability during demanding production runs. Practical dimensions and mounting for consistent performance With a 1.6 mm corner radius, 4.76 mm plate thickness and a 12 mm plate size, the insert provides a robust contact area for secure clamping and reliable cutting forces. The insert features a cylindrical hole with a one‑sided countersink (40°–60°) that fits standard DoFeed milling bodies and fastening screws, allowing straightforward integration into existing tool systems. The nominal 85° edge geometry and 11° free angle support effective chip formation in shallow axial depths while keeping cutting forces manageable. Designed for production reliability and simple tool system integration This insert is supplied as part of a system comprising the milling body, matching indexable plates and fastening screws, which simplifies logistics and tool management. The wear‑resistant coating and tailored chipformer reduce variability from part to part, supporting stable cycle times and predictable maintenance intervals. For production environments seeking repeatable high metal‑removal performance with minimal set‑up variability, this configuration balances productivity with operational robustness. Contact Metav Werkzeuge for DoFeed application recommendations and to request the APMT120416‑MJ (SKU TUN6815299) directly from stock Technical data Article number: 6815299 Manufacturer SKU: TUN6815299 SKU: 6815299‑Tungaloy Model series: DoFeed Insert designation: APMT120416‑MJ Material: carbide Facts Corner radius: 1.6 mm Plate thickness: 4.76 mm Plate size: 12 mm ISO code: 120416 Relief angle: 11° Nominal angle: 85° Special features PVD‑coated AH120 grade MJ chipformer Parallelogram plate form Cylindrical hole with one‑sided countersink (40°–60°) System: insert, matching cutting plates and screws Typical use: high‑feed milling, pocketing and face machining FAQ What machining tasks is this insert best suited for? The APMT120416‑MJ insert from Tungaloy is optimised for high‑feed milling, including pocket and face operations where large time‑span volumes are required with small axial depths. How does the AH120 grade affect performance? The AH120 PVD‑coated carbide grade provides enhanced wear and chipping resistance, delivering a sharp cutting edge and stable process security in repetitive milling cycles. What chip control can be expected with this insert? The MJ chipformer is designed to produce compact, predictable chips that aid evacuation and reduce edge impact, improving surface finish and tool life for the APMT120416‑MJ. Which features ensure secure mounting in milling bodies? The insert’s cylindrical hole with one‑sided countersink and robust plate thickness ensure reliable clamping in compatible DoFeed milling bodies when used with the correct screws. What are the key dimensions to check when replacing inserts? Refer to the corner radius 1.6 mm, plate thickness 4.76 mm, plate size 12 mm, ISO code 120416, relief angle 11° and nominal angle 85° for correct fit and performance. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
APMT 120416 T3130 MJ Wendeplatten - Tungaloy
Optimise high‑feed milling with the DoFeed system and the Tungaloy T3130 grade to achieve stable chip control and prolonged edge life; the combination of a 1.6 mm corner radius and a robust MJ chipbreaker ensures productivity with small axial depths. Order inserts via Metav Werkzeuge or consult their specialists for application-specific selection. APMT 120416 T3130 – DoFeed milling insert by Tungaloy (parallelogram, 85°) The APMT120416‑MJ T3130 is an indexable insert designed for high‑feed milling, pocketing and face machining, combining a parallelogram form and a cylindrical hole with one‑side countersink for secure clamping. DoFeed series for high chip removal T3130 grade for wear resistance and toughness Parallelogram shape with 85° cutting geometry Cylindrical hole with one‑side countersink Increased productivity through optimised high‑feed geometry The DoFeed family is developed for high‑feed milling, enabling large chip volumes at small axial depths and thus higher material removal rates without increasing radial engagement. The parallelogram shape and the 85° cutting geometry reduce cutting forces per pass and improve run‑out tolerance, which helps stabilise the process in interrupted cuts. Combined with a carbide substrate, this geometry delivers reliably consistent performance in production environments where short cycle times are essential. Predictable tool life and stable chip formation The T3130 grade contributes a balanced mix of wear resistance and toughness that complements the insert geometry, while the MJ chipbreaker stabilises chip flow under heavy loads. This combination reduces edge chipping and supports repeatable wear behaviour, translating into longer indexing intervals and lower tooling costs per component. For users seeking a dependable compromise between economy and performance, this design offers measurable gains in process stability and surface integrity. Practical handling and secure clamping for series use With a 1.6 mm radius, a plate size of 12 mm and a thickness of 4.76 mm, the insert supports robust corner strength and improved surface finish on machined faces. The insert’s cylindrical hole with a single‑side countersink (40°–60°) ensures secure location and simple mounting in compatible DoFeed holders. The system concept—insert body, matching indexable inserts and fasteners—facilitates quick changeovers and predictable set‑ups, which is beneficial for shops that run varied programmes or require rapid tool replacement. Contact Metav Werkzeuge for tailored advice on Tungaloy DoFeed inserts and application recommendations — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6853813 Manufacturer SKU: TUN6853813 SKU: 6853813-Tungaloy Designation: APMT120416-MJ T3130 Tungaloy insert Model series: DoFeed Core specifications Size: 12 mm Thickness: 4.76 mm Corner radius: 1.6 mm Cutting geometry: 85° Clearance angle: 11° Hole style: cylindrical hole + one‑side countersink (40°–60°) Special features Carbide material T3130 Tungaloy grade MJ chipbreaker Parallelogram plate form For high‑feed milling, pocketing and face milling With hole for secure clamping Designed for large chip volumes at small axial depths FAQ Which machining tasks suit this insert best? The APMT120416‑MJ T3130 insert is optimised for high‑feed milling, pocketing and face milling where large chip volumes are required at low axial depths; it is part of the DoFeed family and intended for production machining. What is the substrate and grade of the insert? The insert is produced from carbide and supplied in Tungaloy’s T3130 grade, developed to balance wear resistance, toughness and edge stability for milling operations. How does the 1.6 mm corner radius affect results? A 1.6 mm radius increases corner strength and helps achieve a more uniform surface finish while reducing the risk of corner chipping under cyclic loads, which supports longer service intervals for the insert. What clamping features does the insert offer? The insert includes a cylindrical hole with a one‑side countersink (40°–60°) to ensure secure and repeatable seating in compatible DoFeed indexable cutter bodies. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCGT 04T100 SH7025 Wendeplatten - Tungaloy
Benefit from a robust combination of SH7025 coated carbide for stable cutting edges, the ISO CCGT04T100 rhombic form for broad holder compatibility, and a one-sided chipbreaker that promotes reliable chip control — ideal for a consistent turning process. Order directly via Metav Werkzeuge or consult our application specialists for tailored recommendations. CCGT04T100 SH7025 — Turning insert, Tungaloy (coated carbide, rhombic 80°) The CCGT04T100 SH7025 is an ISO-standard rhombic turning insert designed for external and internal turning, delivering edge stability and consistent performance in variable engagement conditions. SH7025 coated carbide for edge stability ISO CCGT04T100 rhombic form for broad compatibility 7° clearance angle for secure cutting geometry Cylindrical hole with countersink for firm clamping Consistent edge life from a coated carbide grade The combination of a coated carbide substrate and the SH7025 grade provides enhanced edge stability under changing cutting conditions. The applied coating improves wear resistance and heat tolerance, which extends service intervals and reduces insert changes. For users transitioning from general-purpose grades, this rhombic insert offers predictable tool life without complex parameter adjustments. The performance advantage is particularly evident in small tools or interrupted cuts, where the tougher grade helps maintain the cutting edge and reduces the risk of premature chipping. Broad holder compatibility and secure clamping Designed to the ISO standard, the rhombic 80° geometry and CCGT04T100 form ensure compatibility with a wide range of external holders and boring bars. The insert’s cylindrical hole with a single-sided countersink (40°–60°) enables firm clamping and repeatable seating, reducing micro-movements during machining. With a 7° clearance behind the cutting edge and a plate thickness of 1.59 mm, the geometry balances rigidity and accessibility, making the insert suitable for both finish and medium-cut operations while maintaining consistent surface quality. Practical machining benefits and application guidance The one-sided chipbreaker is tailored for efficient swarf control during turning, helping to maintain stable process behaviour and reducing the need for manual chip management. This insert is intended for turning applications across a broad material range; selecting the correct chipbreaker geometry and grade helps match the workpiece material and machine stability. For shop-floor adoption, the insert’s familiar ISO form simplifies inventory management and enables straightforward replacement workflows, supporting uninterrupted production and predictable setup times. For specific advice on selecting the right Tungaloy coated insert for a given turning application, or to arrange a targeted recommendation for the CCGT04T100 SH7025, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for fast, application-oriented support. Technical data Article number: 6967420 Manufacturer SKU: TUN6967420 SKU: 6967420-Tungaloy Series: ISO turning inserts Facts Size: 04 Plate designation: 04T100 Thickness: 1.59 mm Clearance angle: 7° Main edge angle: 80° Countersink: 40°–60° Special features Material: carbide Grade/coating: SH7025 Shape: rhombic Hole: with hole; cylindrical hole + single-sided countersink Chipbreaker: one-sided Application: turning (external and internal) FAQ What materials is this insert suitable for? The CCGT04T100 SH7025 insert is a versatile turning grade; the SH7025 coating and carbide substrate are engineered for a broad material spectrum, especially where edge stability is required. How does the one-sided chipbreaker affect machining? A one-sided chipbreaker on this insert promotes controlled chip formation and evacuation during turning, which supports consistent process stability and surface finish. Which holders are compatible with the ISO CCGT04T100 form? Compatibility depends on holder form, clearance, tolerance class, size and thickness; the ISO CCGT04T100 geometry is widely supported by standard external holders and boring bars. What clamping arrangement does this insert use? The insert features a cylindrical hole with a single-sided countersink (40°–60°) to ensure firm and repeatable clamping in standard clamping systems. Can this insert be used for interrupted cuts or unstable engagements? Yes, the SH7025 grade is designed for improved edge stability and performs well in interrupted cuts or when tool engagement varies. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 04T100 SH725 Wendeplatten - Tungaloy
Precise turning with a tough, coated carbide grade and a stable single‑sided chipbreaker delivers consistent edge life and predictable chip control. The ISO‑compliant rhombic form, 7° clearance and 1.59 mm thickness provide secure seating and repeatable results in both external and internal turning. Order the CCGT04T100 SH725 indexable insert directly via Metav Werkzeuge or consult our technical specialists for compatibility advice. CCGT 04T100 SH725 — Turning indexable insert by Tungaloy (7° clearance, 1.59 mm) A CCGT04T100 SH725 indexable insert for ISO‑standard external and internal turning, engineered for durable edge life and reliable chip control across varying engagement conditions ISO‑standard rhombic insert, size 04 Coated carbide grade SH725 for edge stability Single‑sided chipbreaker for predictable chips 7° clearance and 1.59 mm plate thickness Consistent cutting performance for variable turning conditions The combination of a coated carbide substrate and the SH725 grade results in enhanced edge stability, especially suited to small tools or fluctuating engagement. The single‑sided chipbreaker promotes controlled chip formation, reducing the risk of entanglement and machine downtime. For the operator, this means fewer insert changes and more consistent cycle times; for production planners, it translates into improved process repeatability. Coated carbide refers to a cemented carbide base with a thin engineered coating that improves wear resistance while maintaining fracture toughness. Secure clamping and ISO compatibility for repeatable results Built to ISO dimensions and supplied in the rhombic CCGT geometry, the insert ensures predictable fitment with matching holders when the form, clearance angle, tolerance class, fixing, size and thickness align. The 7° clearance angle and 1.59 mm plate thickness provide a stable seating surface in the tool pocket, while the cylindrical hole with one‑sided countersink (40°–60°) enables reliable clamping and torque transfer. Compatibility is determined by mechanical fit rather than brand alone, so confirm these parameters when selecting the mating holder or shim set. Practical selection guidance and typical turning applications Typical use covers external and internal turning; the choice of chipbreaker and grade should match workpiece material, cutting mode and machine stability. The SH725 specification focuses on toughness and resistance to edge chipping, making it a pragmatic choice where interrupted cuts or variable engagement occur. When assembling the system, ensure presence of the appropriate holder, underlay/clamp set and replacement screws to maintain clamping integrity. If uncertain which chipbreaker or grade best suits a job, technical consultation can clarify the trade‑offs between surface finish, cycle time and insert life. For reliable turning with Tungaloy’s SH725 grade, contact Metav Werkzeuge for ordering and tailored technical advice — our consultants can confirm holder compatibility, availability and delivery options. Technical data Article number: 6737264 SKU: 6737264-Tungaloy Manufacturer SKU: TUN6737264 Model series: ISO‑Drehwendeschneidplatten Material: Hartmetall Grade: SH725 Facts Insert size: 04 Plate thickness: 1.59 mm Clearance angle: 7° Shape angle: 80° ISO designation: 04T100 Special features ISO‑standard rhombic form CCGT Coated cemented carbide grade SH725 Single‑sided chipbreaker Cylindrical hole + one‑sided countersink (40°–60°) Designed for external and internal turning System components: insert, holder, shim/clamp set and replacement screws FAQ What applications is this insert suitable for? The CCGT04T100 SH725 Tungaloy indexable insert is designed for external and internal turning, offering a practical balance of toughness and edge stability for variable engagement conditions; refer to SKU 6737264‑Tungaloy for ordering. What does the SH725 grade mean? SH725 denotes a coated cemented carbide grade prioritising toughness and resistance to edge chipping, making the insert appropriate for interrupted cuts and situations with changing cutting forces. How is compatibility with a holder determined? Compatibility depends on the insert form, clearance angle, tolerance class, fixing type, size and thickness; ensure the holder matches the ISO rhombic CCGT geometry and the 1.59 mm plate thickness for secure clamping. What is the hole and seating style of the insert? The insert features a cylindrical hole with a one‑sided countersink (40°–60°) to facilitate correct clamping and torque transmission in compatible holder systems. Which chipbreaker should be chosen for a given job? Select the chipbreaker to suit the workpiece material, machining method and machine stability; the single‑sided chipbreaker on this insert supports predictable chip flow under varying cutting conditions. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCGT 04T100 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of coated carbide SH725, ISO-standard compatibility and a compact 1.59 mm thickness for dependable turning results; order the insert directly via Metav Werkzeuge or ask our consultants for application support. CCGT 04T100 SH725 Tungaloy turning insert — ISO rhombic geometry, coated carbide The CCGT04T100 SH725 is an ISO‑standard indexable turning insert designed for external and internal turning; its rhombic 80° geometry and single‑sided chipbreaker suit variable engagement and small‑tool applications. ISO-standardised geometry for holder fit Coated carbide grade SH725 for edge stability 7° clearance and rhombic 80° profile Single-sided chipbreaker for controlled chips Consistent cutting performance with coated carbide technology The insert is produced from coated cemented carbide grade SH725, a formulation optimised for a stable cutting edge under changing engagement conditions. This composition provides a balance between toughness and wear resistance, reducing the risk of premature chipping when machining interrupted cuts or using smaller toolholders. As a result, the component supports steady cycle times and predictable tool life—advantages that translate directly into improved process efficiency and fewer unscheduled tool changes on the shop floor. ISO compatibility and mechanical fit reduce setup risk Designed to the ISO series for indexable turning inserts, the geometry and dimensions ensure fast integration into existing tool systems. Critical parameters such as form, 7° clearance, tolerance class, fastening type, insert size 04 and a plate thickness of 1.59 mm determine holder compatibility; the rhombic 80° profile and the specified hole style (cylindrical hole with single‑side countersink 40°–60°) facilitate secure clamping in standard external holders or boring bars. These standardised features simplify tool inventory planning and reduce downtime when replacing worn inserts. Practical system approach and application guidance for reliable results The insert is intended for turning (external and internal) and is supplied as part of a system that comprises the ISO insert, a matching external holder or boring bar, and the required shim/clamping set and screws. The single‑sided chipbreaker supports controlled chip formation, which helps maintain surface finish and machine cleanliness. For operations that alternate between light finishing passes and heavier engagements, the SH725 grade is particularly suitable because it combines edge stability with good toughness. For tailored recommendations on clamping torque, radial engagement or optimal feed ranges, Metav Werkzeuge’s technical team can provide application‑specific advice to ensure best‑in‑class performance. Contact Metav Werkzeuge for original Tungaloy inserts, application recommendations and to request availability for the CCGT 04T100 SH725 insert — Metav Werkzeuge provides expert technical guidance and prompt supply coordination. Technical data Article number: 6737263 SKU: 6737263-Tungaloy Manufacturer SKU: TUN6737263 Model series: ISO-Drehwendeschneidplatten Name: CCGT04T100 SH725 Tungaloy insert Facts Geometry angle: 80° Clearance angle: 7° Plate thickness: 1.59 mm Insert size: 04 Countersink angle: 40°–60° Special features Coated cemented carbide (SH725) Single-sided chipbreaker Rhombic plate form With hole — cylindrical hole + single-sided countersink (40°–60°) System components: ISO insert + holder/boring bar + shim/clamping set + spare screws Application: Turning (external and internal) Suitable for smaller tools and variable engagement conditions FAQ What materials is this insert intended to machine? The CCGT 04T100 SH725 insert is a coated cemented‑carbide grade developed for a broad range of turning applications; selection of the appropriate chipbreaker and grade makes it suitable for many steels and mixed operations. How does the SH725 grade affect tool life? SH725 offers a balance of toughness and wear resistance; using the SH725 coated carbide insert typically improves edge stability under variable engagement, helping to extend effective tool life. Which holders are compatible with this insert? Compatibility depends on ISO geometry, clearance angle, tolerance class, fastening method, size and thickness; the rhombic 80° form and the specified hole and countersink allow use in standard ISO external holders and boring bars matched to size 04 inserts. Is the insert reversible and how many cutting edges are available? This is a single‑sided insert with a single active cutting edge per index position; indexing frequency and available edges depend on the specific insert orientation and holder design. What system items are recommended when fitting the insert? A complete set typically includes the ISO insert, a compatible external holder or boring bar, a suitable shim or clamping set and replacement screws for secure mounting. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com