TNMG 160416 T9225 Wendeplatten - Tungaloy
Combining robust CVD‑coated carbide T9225, a 1.6 mm corner radius and full ISO compatibility delivers reliable performance for medium to heavy steel turning; this improves stability and reduces downtime. Order directly via Metav Werkzeuge or consult our specialists for application-specific advice. TNMG160416 T9225 TNMG indexable turning insert — CVD‑coated carbide, 60° | Tungaloy The TNMG160416 T9225 is a triangular ISO indexable insert for turning, engineered as a universal, tough grade for medium to heavy steel machining with a 60° geometry and a 1.6 mm corner radius. CVD‑coated carbide grade T9225 1.6 mm corner radius for roughing and finishing 60° triangular geometry for versatile turning Double‑sided with cylindrical hole for secure clamping Consistent cutting performance for demanding turning tasks The insert combines a CVD‑coated surface with a robust carbide substrate, providing a balance of wear resistance and toughness that suits interrupted cuts and variable engagement. As part of an ISO insert system, compatibility depends on form, clearance angle (0°), tolerance class, fastening method, size and thickness; matching the insert to a suitable holder reduces vibration and extends service life. This technical harmony supports stable metal removal rates and consistent component quality, helping to maintain productive machining cycles. Designed geometry for repeatable accuracy and fast set‑up The triangular 60° shape with a 1.6 mm corner radius gives a compromise between edge strength and surface finish: the larger radius resists edge chipping under heavier radial depths, while still permitting acceptable roughing and semi‑finishing passes. The double‑sided design doubles the available cutting edges, lowering tooling costs per edge. A cylindrical hole and standard thickness (4.76 mm) ensure straightforward clamping with shims and screws, enabling repeatable positioning and rapid index changes during shift work. Productivity, tool life and application guidance The T9225 grade is a universal, tougher CVD variant intended for medium to heavy steel turning where changing engagement or lightly interrupted cuts demand toughness over extreme hardness. The coating improves abrasion resistance and thermal stability, which typically translates into longer tool life and fewer insert changes — a direct contribution to throughput and lower downtime. For system build‑up, use an ISO‑compatible external holder or boring bar together with a backing pad, clamping set and spare screws. If uncertain about holder compatibility or cutting data for a specific steel grade, technical data sheets and material guidance are available. For application advice or to arrange supply of Tungaloy inserts, contact Metav Werkzeuge for tailored recommendations and order handling; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6951030 Manufacturer SKU: TUN6951030 SKU: 6951030-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: TNMG160416 T9225 Tungaloy-Wendeplatte Core data Inscribed circle: 16 mm Corner radius: 1.6 mm Thickness: 4.76 mm Clearance angle: 0° Included angle: 60° ISO code: 160416 Special features CVD‑coated carbide (T9225) Double‑sided chipbreaker Triangular plate form With cylindrical hole Intended application: Turning Material: carbide FAQ What materials is this insert suited for? The TNMG160416 T9225 insert is specified as a robust universal grade for steel machining, particularly medium to heavy steel where variable engagement or slight interruptions call for additional toughness. How does the T9225 grade affect tool life? Tungaloy’s T9225 CVD‑coated carbide enhances abrasion resistance and thermal stability, which generally increases insert life in demanding turning operations compared with uncoated grades. Is the insert compatible with standard ISO holders? Compatibility is determined by form, clearance angle, tolerance class, fastening and plate dimensions; TNMG160416 conforms to ISO geometry and is intended for use in ISO‑compliant external holders or boring bars. How many cutting edges are available per insert? The triangular, double‑sided design provides multiple indexable edges, effectively doubling the number of usable cutting corners versus single‑sided plates. What is the function of the 1.6 mm corner radius? The 1.6 mm corner radius increases edge strength for heavier depths of cut and interrupted machining, improving chip control and reducing the risk of edge fracture while still permitting acceptable surface finish. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNMG 160416 T9225 Wendeplatten - Tungaloy
Benefit from the CVD-coated carbide T9225 and the 60° TNMG160416 triangular form for stable medium-to-heavy steel turning; order the insert directly via Metav Werkzeuge or consult our technical advisers for application support. TNMG160416 T9225 — ISO turning insert for medium-to-heavy steel, Tungaloy The TNMG160416 T9225 is a triangular ISO turning insert engineered for robust external and internal turning operations, optimised for variable engagement and slightly interrupted cuts. CVD-coated carbide grade T9225 60° triangular ISO form for strong support Robust universal grade for medium–heavy steel Double-sided chipbreaker with cylindrical hole Consistent performance in demanding steel turning The insert’s CVD-coated carbide composition delivers a balance of wear resistance and toughness that supports longer tool life under variable cutting conditions. The T9225 grade is formulated as a robust universal grade for medium-to-heavy steel turning, which means fewer tool changes and steady component quality during batch runs. The coating improves thermal stability and abrasive wear resistance, while the substrate provides fracture resistance when cuts are slightly interrupted. This combination reduces unscheduled downtime and helps maintain cycle-time targets in production. Secure seating and predictable compatibility with ISO holders Designed to ISO dimensions, the triangular form provides a 60° seat for secure clamping and stable cutting geometry. Compatibility with toolholders depends on form, relief angle, tolerance class, fastening, size and thickness; the zero-degree relief noted here supports consistent tool engagement. The insert includes a cylindrical hole for positive locating and is double-sided, offering economical use of each indexable edge. Clear compliance with ISO sizing simplifies purchasing and guarantees interchangeability across standard external holders and boring bars. Practical benefits: finish quality, economy and ease of use The double-sided chipbreaker on this type of insert controls chip formation for predictable evacuation and surface integrity, particularly when machining steels with variable machinability. A 1.6 mm corner radius improves edge strength and helps achieve a balance between surface finish and component tolerance control. For operations requiring a change of cutting data, the universal character of the grade allows quick parameter adjustments without a full tooling evaluation, supporting lean inventory and reducing capital tied up in specialised inserts. Overall, the insert is suitable where stability and repeatable performance are priorities. For reliable medium-to-heavy steel turning with Tungaloy’s T9225, request application guidance or a technical quote from Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6966231 Manufacturer SKU: TUN6966231 Dealer SKU: 6966231-Tungaloy Model series: ISO turning inserts Material: Carbide (Hartmetall) Facts ISO designation: TNMG160416 Insert size: 16 mm Thickness: 4.76 mm Corner radius: 1.6 mm Insert angle: 60° Relief angle: 0° Hole style: Cylindrical Special features Grade: T9225 Coating: CVD-coated carbide Shape: Triangular Chipbreaker: Double-sided Hole: With hole (cylindrical) Typical application: Turning FAQ What materials is this insert suited for? The Tungaloy TNMG160416 T9225 insert is intended primarily for medium-to-heavy steel turning; the T9225 grade provides robustness for varying engagement conditions. How many usable edges does the insert offer? Because the insert is double-sided, it provides multiple indexable cutting edges, which improves economy compared with single-sided designs. Does the insert fit standard ISO holders? Yes. The TNMG160416 follows ISO dimensions; compatibility with a specific holder is determined by form, relief angle, tolerance class, fastening method, size and thickness. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160416 T9235 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide durability, a tough T9235 grade for unstable cuts, and ISO compatibility for fast tool changes; order directly via Metav Werkzeuge or consult our specialists for application matching and stocking advice. TNMG 160416 T9235 turning insert (ISO turning) — Tungaloy, CVD-coated carbide, 60° The TNMG160416 T9235 is an ISO-standard triangular indexable insert designed for external and internal turning, offering a tough grade optimised for steel machining under interrupted or unstable conditions. CVD-coated carbide for durable edge Tough T9235 grade for unstable cuts Triangular ISO insert with 60° geometry Double-sided chipbreaker for versatility Longer tool life where interrupted cuts occur The CVD-coated carbide substrate combined with the T9235 grade provides increased resistance to wear and chipping in demanding steel turning tasks. The coating enhances thermal stability and reduces flank wear, which translates into longer edge life and fewer insert changes. For workshops facing frequent interruptions or variable rigidities in the setup, this results in more productive uptime and lower tooling consumption per finished component. The emphasis here is on measurable efficiency rather than theoretical performance claims. Fast, standardised mounting for process consistency As an ISO indexable insert with a triangular form and a cylindrical hole, the design ensures compatibility with common holders and boring bars when the form, clearance angle, tolerance class, fastening method, size and thickness are matched. The standardised geometry enables quick replacement and repeatable seating, reducing set-up time and helping maintain reproducible part quality across batches. This compatibility supports lean inventory management and predictable changeover routines on the shop floor. Stable chip control and reliable performance under disruption The insert's double-sided chipbreaker and corner radius 1.6 mm promote consistent chip formation and evacuation, particularly in interrupted cuts or less rigid conditions. Selecting a tough grade and an appropriate chipbreaker means reduced risk of catastrophic edge failure and improved surface finish at recommended, lower cutting speeds. For components where occasional impact or variable engagement occurs, the result is a safer process and fewer scrap parts. Material and application guidance for practical selection Manufactured from carbide and optimised for turning of steel, this insert suits external and internal operations where slower cutting speeds and robust edge stability are required. The 0° clearance angle and 60° cutting geometry support general-purpose profiling and facing tasks while the insert thickness and triangular size provide a balance between strength and access in confined geometries. When higher speeds or specific surface-roughness targets are needed, pairing this insert with the correct holder and cutting parameters is advised to exploit the grade's strengths. For reliable steel turning with Tungaloy’s T9235 grade, request the TNMG160416 insert from Metav Werkzeuge for application matching and availability—contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6785955 SKU: 6785955-Tungaloy Manufacturer SKU: TUN6785955 Label: TNMG160416 T9235 Tungaloy-Wendeplatte Model series: ISO indexable turning inserts Material: carbide Facts Size: 16 mm Thickness: 4.76 mm Corner radius: 1.6 mm Clearance angle: 0° Cutting angle: 60° Mounting: cylindrical hole Special features Grade: T9235 Coating: CVD-coated Chipbreaker: double-sided Shape: triangular (TNMG) Hole style: cylindrical hole Application: external and internal turning FAQ Which materials is this insert best suited for? The TNMG160416 T9235 insert by Tungaloy is engineered primarily for machining steel at lower cutting speeds and under unstable or interrupted cutting conditions, making it appropriate for a broad range of steel grades. How does the T9235 grade affect cutting parameters? Tungaloy’s T9235 grade emphasises toughness over extreme wear resistance, so recommended cutting parameters favour lower speeds and conservative feeds to exploit improved edge stability and avoid premature chipping of the insert. Can the insert be used on internal turning operations? Yes, the ISO triangular form and the cylindrical-hole mounting of this indexable insert allow use in both external and internal turning holders when the correct holder geometry and clamping are applied. What benefits does the CVD coating provide? The CVD-coated carbide reduces thermal wear and supports stable cutting conditions; in the TNMG160416 this coating contributes to longer tool life and more consistent surface finish under intermittent engagement. Is the corner radius suitable for finishing passes? With a corner radius of 1.6 mm, the insert balances strength and achievable surface finish; it is well suited to general-purpose turning and light finishing where a modest radius is acceptable. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160416 TH10 Wendeplatten - Tungaloy
Benefit from the combination of uncoated TH10 carbide, ISO interchangeability and a 1.6 mm corner radius for low cutting forces and improved surface quality in turning operations; order the insert directly via Metav Werkzeuge or ask our consultants for compatibility advice. TNMG160416 TH10 ISO turning insert for turning — Tungaloy TNMG160416 TH10 is an ISO-format indexable insert designed for external and internal turning with a 60° triangular geometry and a cylindrical locating hole ISO TNMG geometry for wide holder compatibility Uncoated carbide TH10 for low cutting forces Double-sided chipbreaker for consistent chip control 1.6 mm corner radius for improved surface finish Faster, cleaner turning with a sharp uncoated grade The TH10 grade is an uncoated carbide formulation optimised for applications where a sharp cutting edge reduces cutting forces and delivers a cleaner surface. In practice this means lower feed resistance and reduced tendency to built-up edge when machining non-ferrous materials and softer alloys. The combination of the 60° triangular form and a 1.6 mm corner radius supports steady engagement at the cut edge, translating into reliable metal removal and improved dimensional consistency during both roughing and light finishing passes. Seamless integration through ISO geometry and standard dimensions Configured to ISO norms, the insert’s geometry and dimensions ensure straightforward integration with standard turning holders. Key interface parameters such as form, clearance angle (0°), tolerance class, clamping style and plate thickness determine compatibility; by matching these values the insert can be fitted quickly without extensive rework of the toolholder. This standardisation reduces stock complexity and shortens setup time on the shop floor, supporting continuous production and predictable tool change procedures. Controlled chip formation for stable processes and surface quality The double-sided chipbreaker design promotes consistent chip control on both faces of the plate, helping to avoid long curled chips and to maintain stable cutting forces. For operators this reduces vibration and aids surface finish consistency. The sharp uncoated edge of the grade further assists in producing short, predictable chips when paired with appropriate feeds and speeds. This combination is particularly effective when machining aluminium, brass and other non-ferrous workpieces where chip control directly affects cycle time and component quality. Robust clamping, economical usage and practical handling A cylindrical locating hole and a plate thickness of 4.76 mm provide secure clamping and repeatable positioning in the pocket. The triangular plate form and the double-sided chipbreaker extend the number of usable cutting edges, contributing to better cost per edge and lower tooling consumption across batches. For applications requiring fast switching between external and internal turning, or where tool change speed is essential, this insert offers a pragmatic balance of precision and economy. If additional technical data or verification for a specific holder is required, Metav Werkzeuge is available to advise by email or phone: info@metav-werkzeuge.com / +49 2822 7131930 Contact Metav Werkzeuge for tailored application advice and precise holder compatibility checks for the Tungaloy TNMG160416 TH10 indexable insert — our consultants will advise on the optimal setup and supply options Technical data Article number: 6808561 SKU: 6808561-Tungaloy Manufacturer SKU: TUN6808561 Brand: Tungaloy Model series: ISO turning indexable inserts Core dimensions ISO designation: TNMG160416 Size: 16 mm Thickness: 4.76 mm Corner radius: 1.6 mm Cutting angle: 60° Clearance angle: 0° Locating hole: cylindrical Materials & special features Material: carbide Grade / coating: TH10 (uncoated) Chipbreaker: double-sided Plate form: triangular Clamping: with locating hole (cylindrical) Typical application: turning (external and internal) Compatibility: ISO holder systems FAQ What materials is this insert best suited for? The TNMG160416 TH10 insert is optimised for non‑ferrous materials and applications where a sharp, uncoated cutting edge supports low cutting forces and clean surfaces. How does the TH10 grade influence cutting behaviour? TH10 is an uncoated carbide grade that provides a keen edge and reduced friction at the cut, resulting in lower cutting forces and improved finish on softer alloys and non‑ferrous materials. Which holder characteristics determine compatibility? Compatibility depends on holder form, 0° clearance angle, tolerance class, clamping method, plate size and thickness; matching these factors ensures correct seating of the TNMG160416 insert. Does the insert offer chip control for continuous turning? Yes, the double‑sided chipbreaker on the insert supports repeatable chip formation and stable cut conditions, aiding surface quality and process reliability. What are the key dimensions to check before ordering? Verify the ISO designation TNMG160416, plate size 16 mm, thickness 4.76 mm and corner radius 1.6 mm to ensure the insert matches the toolholder pocket and intended machining task. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160420 T9215 Wendeplatten - Tungaloy
Combine CVD-coated carbide durability with ISO compatibility and a robust 2 mm corner radius for consistent, high‑productivity turning. Order the insert directly via Metav Werkzeuge or consult the team for application-specific advice. TNMG 160420 T9215 Turning Insert by Tungaloy — CVD‑coated carbide, ISO triangular insert for medium steel The TNMG160420 T9215 is an ISO‑standard triangular turning insert for external and internal turning, optimised for medium steel machining and continuous to mildly interrupted cuts. CVD-coated carbide grade T9215 Designed for medium steel machining Double-sided insert with cylindrical hole 2 mm corner radius for robust cutting edge Consistent tool life and process stability for medium steel The CVD‑coated carbide grade delivers an excellent balance of wear resistance and fracture toughness, making it a first choice for productive turning of medium‑hard steels. The coating improves thermal stability at cutting edges, which reduces flank wear during sustained cuts and extends time between indexings. As part of an ISO insert system, the geometry and tolerance classes ensure predictable seating and repeatable results in matching external holders or boring bars. The result is a measurable improvement in throughput and fewer unexpected tool changes, supporting efficient machining cycles. Geometry and design that support higher productivity A 2 mm corner radius provides a robust cutting edge that resists chipping under variable cutting forces, while the double‑sided configuration doubles the available cutting edges per insert, lowering tooling costs per part. The 0° clearance angle and triangular form give stable support in the pocket and promote consistent chip formation when paired with the appropriate chipbreaker and feed rates. The cylindrical locating hole further secures the insert against rotation and ensures correct clamping force. Together, these features reduce vibrations and aid surface finish, translating directly into shorter cycle times and fewer reworks. Practical compatibility and handling in workshop setups Designed to the ISO-Drehwendeschneidplatten series specifications, the insert is compatible with standard ISO external holders, clamping kits and replacement screws when dimensions and form match. The CVD‑coated carbide body suits continuous and slightly interrupted cuts; selecting the correct chipbreaker and feed parameters will unlock both productivity and surface quality. For smaller shops and large production environments alike, the standardised form factor simplifies inventory management and tool changes. The Tungaloy grade supports consistent repeatability across batches, making it easier to plan maintenance intervals and machining strategies. For reliable, high‑productivity turning with Tungaloy’s CVD coating and ISO compatibility, contact Metav Werkzeuge for tailored recommendations and prompt supply Technical data Article number: 6772343 Manufacturer SKU: TUN6772343 SKU: 6772343-Tungaloy Model series: ISO-Drehwendeschneidplatten Type designation: TNMG160420 Grade: T9215 Material: Hartmetall Facts Corner radius: 2 mm Plate thickness: 4.76 mm Plate size: 16 mm Angle: 60° Clearance angle: 0° Hole: with cylindrical hole Special features CVD-coated carbide Double-sided chipbreaker ISO triangular plate form Suitable for medium steel machining Compatible with standard external holders and boring bars Designed for continuous to slightly interrupted cuts FAQ What materials is this insert intended for? The TNMG160420 T9215 insert is intended primarily for medium steel machining and is formulated to balance wear resistance and toughness for that application. Is the insert indexable and how many cutting edges are available? This triangular insert is double-sided, offering multiple indexable cutting edges to extend tool life and reduce tool costs per part. Does the hole affect clamping and stability? The cylindrical locating hole ensures secure clamping and correct positioning in compatible holders, improving stability during turning operations. Can the insert be used for interrupted cuts? The T9215 grade handles continuous to mildly interrupted cuts; for heavy interruption, adjust cutting parameters or select a grade specified for heavy interruptions. Which holder types suit this ISO insert? Standard ISO external holders and boring bars matching the TNMG160420 form, size and tolerance class are suitable for secure mounting and repeatable performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160420 T9225 Wendeplatten - Tungaloy
Take advantage of a robust CVD-coated carbide grade and an optimised 2 mm corner radius to maintain stability in medium to heavy turning operations; compatibility with ISO holders ensures quick integration into existing tool systems. Order directly via Metav Werkzeuge or request application advice from their consultants for process-specific recommendations. TNMG160420 T9225 indexable turning insert, CVD-coated carbide, 60° – Tungaloy TNMG160420 T9225 is a triangular ISO-indexed turning insert designed for medium to heavy steel machining, offering a robust universal grade and secure clamping for demanding turning tasks. CVD-coated carbide for toughness Universal grade for medium-heavy steel Triangular 60° shape with hole 2 mm corner radius for profile control Double-sided chipbreaker Reliable cutting performance for heavy turning cycles The CVD-coated carbide chemistry of this insert provides a balance of wear resistance and toughness that is suited to alternating engagement conditions in turning. The T9225 grade is formulated as a robust universal option, which means it maintains cutting edge integrity under semi-interrupted cuts and variable feed rates. This results in reliable material removal and contributes to longer effective tool life, reducing the frequency of tool changes and supporting consistent production throughput. Geometry and system compatibility that reduce set-up time A triangular 60° form with a cylindrical hole and 0° relief angle ensures stable seating in ISO-compatible holders. Compatibility is determined by the insert form, clearance angle, tolerance class, fixing method, size and thickness, so the insert is ready to be matched to the correct external holder or boring bar. The 2 mm corner radius delivers controlled profile generation and improved edge strength, while the double-sided chipbreaker gives two usable edges per side, enhancing economy and lowering tooling costs per component. Practical benefits for workshop integration and process security The insert’s ISO conformity simplifies inventory management within established turning systems and makes replacement straightforward when a cutting edge is consumed. Because the component is part of a system that includes the mating holder, clamping set and fixing screws, planned maintenance and predictable replenishment are enabled, helping to keep machine uptime high. The combination of an established cutting grade and ISO geometry supports process stability and repeatable surface quality in series production. Contact Metav Werkzeuge for a process evaluation and tailor a tooling package around the Tungaloy TNMG160420 T9225 insert — technical consultants are available at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical Data Article number: 6780784 SKU: 6780784-Tungaloy Manufacturer SKU: TUN6780784 Model series: ISO-indexed turning inserts Facts Shape size: 16 mm Thickness: 4.76 mm Corner radius: 2 mm Included angle: 60° Relief angle: 0° Hole: with hole Hole style: cylindrical Special features Material: carbide Coating / grade: T9225 (CVD-coated) Chipbreaker: double-sided Plate form: triangular Application: turning ISO designation: TNMG160420 System: ISO-indexed insert compatible with external holders and boring bars FAQ What materials is this insert best suited for? The TNMG160420 T9225 indexable insert from Tungaloy is specified as a robust universal grade for medium to heavy steel machining and performs where intermittent engagement or variable cut conditions require additional toughness. How does the geometry affect holder selection? Compatibility is determined by the insert form, relief angle, tolerance class, fixing method, size and thickness; the TNMG160420’s triangular 60° form and 4.76 mm thickness require a matching ISO holder or boring bar to ensure secure clamping. How many cutting edges are available per insert? The TNMG160420 T9225 is double-sided with a chipbreaker, offering multiple usable edges which enhances economy and reduces tool change frequency in production environments. Is the insert suitable for interrupted cuts? Yes, the CVD-coated T9225 grade provides enhanced toughness, making the TNMG160420 appropriate for semi-interrupted cutting conditions encountered in many turning applications. What is included in the replacement system? The ISO-indexed insert is part of a system comprising the insert itself, the appropriate external holder or boring bar, a seating pad/clamping set and replacement screws as required for proper installation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160420 T9235 Wendeplatten - Tungaloy
Take advantage of the combination of ISO conformity, a CVD-coated carbide grade optimised for steel and a reversible, double-sided design for efficient stock removal; these features support stable production even under interrupted cuts. Order the insert directly via Metav Werkzeuge or contact the consultants for technical guidance. TNMG 160420 T9235 indexable turning insert for turning — Tungaloy TNMG 160420 T9235 is an ISO-standard triangular indexable insert designed for general turning operations, offering a tough CVD-coated carbide grade suited to steel and unstable cutting conditions. ISO TNMG 160420 format, triangular insert CVD-coated carbide grade T9235 for steel Double-sided chipbreaker, suitable for interrupted cuts 60° cutting angle with 2 mm corner radius High reliability under interrupted and unstable cutting The combination of CVD-coated carbide and the T9235 grade provides increased toughness compared with many general-purpose coatings, which translates into fewer edge failures during interrupted cuts and less frequent insert breakage. The coating is applied via chemical vapour deposition, creating a hard, wear-resistant layer while retaining a resilient substrate; this balance improves chip control and reduces the risk of flank chipping when machining steels at moderate cutting speeds. For workshop teams seeking predictable tool life in variable setups, this insert delivers dependable performance without requiring aggressive cutting parameters. Precise geometry and secure mounting for repeatable results The ISO TNMG 160420 format denotes a nominal 16 mm inscribed circle with a triangular plate and a 60° cutting angle, a geometry that supports versatile turning applications. The insert features a 2 mm corner radius and a 4.76 mm thickness, dimensions that give clear indications of allowable depth of cut and edge strength. The plate is supplied with a cylindrical hole, enabling positive clamping in compatible toolholders; compatibility is determined by form, relief/clearance angle (here listed as 0° relief angle), tolerance class, fastening type, size and thickness. These standardized attributes simplify holder selection and help maintain concentricity and repeatability across tool changes. Efficient use and application guidance for turning operations Configured with a double-sided chipbreaker, the insert is reversible, effectively doubling the cutting edges available per plate and contributing to a more cost-effective tooling strategy. Typical uses include external and internal turning where intermittent cuts or unstable setups occur; the grade is particularly suited to steel when lower cutting speeds are applied. Selecting the appropriate chipbreaker and grade matching the workpiece material and machine stability will yield the best balance between surface finish and tool life. The geometry and coating together support consistent chip formation and easy disposal of swarf, aiding both process reliability and shop-floor efficiency. For application advice or to secure these Tungaloy inserts with Metav Werkzeuge, contact Metav Werkzeuge for tailored technical consultation or to place an order via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6785956 Manufacturer SKU: TUN6785956 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Dimensions & core values ISO designation: 160420 Inscribed circle / size: 16 mm Thickness: 4.76 mm Corner radius: 2 mm Relief angle: 0° Cutting angle: 60° Hole: with cylindrical hole Materials & special features Carbide substrate (Hartmetall) CVD-coated carbide, grade T9235 Double-sided chipbreaker Triangular insert for turning Suitable for steel, interrupted cuts and unstable conditions FAQ What materials is this insert best suited to machine? The TNMG 160420 T9235 insert is optimised for machining steel; the T9235 CVD-coated carbide grade is formulated for toughness at lower cutting speeds and in interrupted-cut scenarios. How does the T9235 grade affect tool life compared with general-purpose grades? Tungaloy’s T9235 grade emphasises resistance to edge chipping and robust performance under instability, which can extend effective tool life in applications with frequent interruptions or variable clamping. Can the insert be reversed to use the second cutting edge? Yes, the insert is double-sided with a reversible chipbreaker, allowing the use of multiple cutting corners before replacement is necessary. Which holder features must be matched to ensure compatibility? Compatibility requires matching the insert form, relief/clearance angle, tolerance class, fastening method, size and thickness; the TNMG 160420 format and cylindrical hole are standardised for many TNMG holders. What are the key geometric specifications to consider when planning a turning operation? Important specifications include the 16 mm inscribed circle, 2 mm corner radius, 4.76 mm thickness and the 60° cutting angle, which influence depth of cut, edge strength and the achievable surface finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 220404 AH120 Wendeplatten - Tungaloy
Robust PVD-coated AH120 carbide combined with a 60° triangular geometry and a 0.4 mm corner radius delivers stable cutting and long tool life for turning operations. Order the TNMG220404 AH120 Tungaloy insert directly via Metav Werkzeuge or consult the technical team for matching chipbreaker and holder compatibility. TNMG 220404 AH120 turning insert by Tungaloy — PVD-coated carbide, 60° The TNMG220404 AH120 is an ISO-standard triangular indexable insert for external and internal turning, designed to provide a sharp cutting edge and reliable process security in a range of machining scenarios. ISO TNMG 220404 triangular turning insert PVD-coated carbide grade AH120 for wear resistance 60° geometry with 0.4 mm corner radius Double-sided chipbreaker and cylindrical hole Productive cutting performance with sustained edge life The PVD-coated AH120 grade is a wear- and fracture-resistant carbide that prioritises a durable, sharp cutting edge for demanding turning tasks. Combined with the 60° tool geometry and triangular form, the insert provides multiple usable edges per index, improving productivity and reducing tool-change frequency. The design supports steady metal removal rates while maintaining surface quality, so machining cycles remain predictable and efficient. Secure clamping and reliable chip control for consistent results Clamping is reinforced by the central cylindrical hole, which ensures exact seating and repeatable positioning in compatible ISO holders. The double-sided chipbreaker promotes controlled chip formation across a range of cutting conditions, lowering the risk of built-up edge and stabilising process behaviour. With a thickness of 4.76 mm and precise tolerances, the insert suits robust set-ups where vibration damping and repeatability matter for part accuracy. Practical selection guidance to match material and stability needs For external and internal turning, the choice of chipbreaker and grade should reflect the workpiece material, machine rigidity and desired surface finish. The TNMG220404 AH120 insert is particularly useful where a sharp edge and process reliability are required; its balanced properties make it adaptable across many steels and alloy applications. Selecting the correct chipbreaker and clamping arrangement will extend tool life and ensure consistent component quality. Contact Metav Werkzeuge to discuss application-specific recommendations for the Tungaloy TNMG220404 AH120 insert and arrange supply or technical advice Technical data Article number: 6812065 Manufacturer SKU: TUN6812065 Product SKU: 6812065-Tungaloy Model series: ISO indexable turning inserts Facts Shape: triangular Size: 22 mm Thickness: 4.76 mm Corner radius: 0.4 mm Cutting angle: 60° Rake angle: 0° Mounting: with cylindrical hole Special features Grade: AH120 PVD-coated carbide Double-sided chipbreaker Compatible with ISO holders (form, angle, size) Typical use: external and internal turning FAQ What materials is this insert suited for? The TNMG220404 AH120 insert is specified for turning applications where a sharp, wear-resistant edge is required; the AH120 grade and PVD coating make it suitable for a broad range of steels and alloyed materials when combined with an appropriate chipbreaker. How does the 60° geometry affect cutting performance? A 60° cutting geometry offers a balance between strength and accessibility in turning operations; the TNMG220404’s geometry provides stable cutting for external and internal work while delivering good surface finish when mounted in a suitable ISO holder. What does the double-sided chipbreaker provide? The double-sided chipbreaker on this indexable insert supports controlled chip formation on both usable faces, improving process stability and reducing the likelihood of chip-related interruptions during turning. Is the insert compatible with standard ISO holders? Compatibility is governed by insert shape, free rake angle, tolerance class, fastening method, size and thickness; the TNMG220404 adheres to ISO dimensions and is intended for use with corresponding ISO standard holders. How many usable cutting edges does the insert offer? The triangular shape of the TNMG220404 provides multiple indexable cutting edges; exact usable edges depend on the chosen index method and whether both sides are utilised with the double-sided chipbreaker. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 220404 AH120 Wendeplatten - Tungaloy
Benefit from the combination of PVD-coated carbide wear resistance and double-sided geometry for economical, repeatable turning performance; the secure clamping via the cylindrical hole and ISO conformity ensures predictable tool life. Order the TNMG220404 AH120 insert directly via Metav Werkzeuge or request application advice from our consultants. TNMG220404 AH120 TNMG – ISO turning insert for turning applications by Tungaloy TNMG220404 AH120 is an ISO-standard triangular turning insert for general external and internal turning, optimised for wear resistance and process reliability PVD-coated carbide for extended tool life Double-sided geometry reduces tooling cost 60° included angle for standard turning holders Cylindrical hole for secure clamping Reliable, high-performance cutting for productive turning The PVD-coated carbide grade offers a balance of wear resistance and fracture toughness that supports steady performance in cyclic production. A sharp cutting edge, combined with the wear- and break-resistant AH120 grade, delivers consistent chip formation and surface finish during both roughing and finishing operations. The double-sided configuration doubles indexable life per insert, which reduces direct tooling costs and inventory complexity while maintaining stable cutting conditions. Design features that protect the process and reduce setup risk A triangular plate shape with a 60° included angle and 0.4 mm corner radius gives a predictable engagement with the workpiece, limiting vibration and helping control cutting forces. The insert’s cylindrical hole and standardised form ensure secure clamping in ISO-compatible holders; compatibility depends on form, relief angle, tolerance class, fixing method, size and thickness. The 4.76 mm thickness provides rigidity under moderate cutting forces, supporting repeatable dimensioning and longer tool life. Practical application advice for shop-floor integration This insert is intended for ISO-standard turning setups and suits both external and internal turning tasks when paired with an appropriate external holder or boring bar and the correct chipbreaker. Select chipbreaker and grade to match the workpiece material and machining stability. The AH120 grade is particularly useful where a sharp cutting edge and process security are required, for example in medium-duty production runs that prioritise surface quality and dimensional consistency. Interpreting technical specifications and getting the best results Key measurable values — including inscribed circle 22 mm, thickness 4.76 mm, corner radius 0.4 mm and relief angle 0° — dictate how the insert performs in different setups. For users less familiar with insert geometry: the inscribed circle and included angle determine holder compatibility; the corner radius influences achievable surface finish and tool strength; thickness and hole style affect clamping stability. Matching these parameters to the machine rigidity and fixture reduces vibrations and extends tool life. For application support, sample recommendations or to secure Tungaloy TNMG220404 AH120 inserts, contact Metav Werkzeuge: info@metav-werkzeuge.com or +49 2822 7131930 — our team will advise on holder compatibility and cutting data Technical data Article number: 6812067 SKU: 6812067-Tungaloy Manufacturer SKU: TUN6812067 ISO designation: TNMG220404 Grade: AH120 Material: carbide Key measurements Inscribed circle / size: 22 mm Thickness: 4.76 mm Corner radius: 0.4 mm Included angle: 60° Relief angle: 0° ISO code: 220404 Features & applications Triangular plate, double-sided chipbreaker Cylindrical hole for secure clamping PVD-coated carbide, wear- and break-resistant Suitable for external and internal turning Compatibility determined by form, fixing, tolerance and holder FAQ What materials can this insert machine effectively? The AH120 PVD-coated carbide insert is designed for general turning tasks; its wear resistance and toughness make it suitable for a broad range of steels and common workshop materials when the correct chipbreaker and machining parameters are chosen for the TNMG220404 AH120 insert. How does the double-sided design benefit production? Double-sided geometry doubles the available cutting edges on the TNMG220404 AH120 insert, lowering per-edge cost and simplifying inventory while providing consistent cutting performance across multiple indexings. Which holder features are required for correct fitment? Holder compatibility depends on the insert form, relief angle, tolerance class, fixing method, inscribed circle and thickness; the triangular TNMG form with 60° included angle fits ISO-standard turning holders that accept TNMG inserts. Is the insert suitable for finishing operations? Yes — with an appropriate corner radius and stable machining conditions, the AH120 grade supports finishing to achieve good surface quality while maintaining tool life. What does the relief angle of 0° mean in practice? A 0° relief angle indicates minimal flank relief; correct holder geometry and cutting parameters are essential to prevent rubbing. This form is common in inserts engineered for specific holder geometries and secure clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 220404 AH6225 Wendeplatten - Tungaloy
Take advantage of the TNMG220404’s PVD-coated AH6225 grade for reliable performance in rostfreiem Stahl, its ISO compatibility and compact 0.4 mm corner radius for repeatable finishes; order directly via Metav Werkzeuge or consult our specialists for application support. TNMG220404 AH6225 turning insert, triangular ISO turning insert – Tungaloy The TNMG220404 AH6225 is an ISO‑standard triangular turning insert designed for external and internal turning, offering a balanced cutting edge for medium‑duty machining of rostfreiem Stahl. ISO‑standard triangular insert TNMG 220404 PVD-coated AH6225 grade for rostfreiem Stahl 0.4 mm corner radius for precision finishes Double-sided chipbreaker; cylindrical mounting hole Consistent cutting performance for rostfreiem Stahl The insert’s PVD-coated surface and the AH6225 grade deliver a combination of wear resistance and edge sharpness that suits variable shop conditions. For rostfreiem Stahl the coating reduces built‑up edge and improves thermal stability, which results in more consistent part tolerances and a lower scrap rate. The design aims to provide a sharp, stable cutting edge that maintains dimension and surface quality over longer tool life, reducing tool change frequency and supporting predictable cycle times. Precision geometry and ISO compatibility for fast set-up Built to ISO specifications as a TNMG type, the geometry ensures straightforward compatibility with common external holders and boring bars when the form, clearance angle, tolerance class, fastening method, size and thickness match. The 0.4 mm corner radius balances strength and finish capability: it supports small‑step finishing without compromising edge robustness. The triangular shape with a cylindrical mounting hole enables secure clamping and repeatable positioning, simplifying tool changeovers and minimising set‑up time on the shop floor. Robustness and economic machining for medium‑duty turning Made of premium carbide and finished with a durable PVD coating, the insert is intended for productive turning where stable chip control and repeatable performance matter. The double-sided chipbreaker provides two usable cutting edges per side, effectively increasing the number of operations per insert and improving cost per cutting edge. As an ISO‑standard turning component, it supports both external and internal turning strategies and is suitable where a reliable, general‑purpose insert is required for rostfreiem Stahl in varying conditions. Contact Metav Werkzeuge for tailored recommendations on Tungaloy PVD‑coated turning inserts; email info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 6903205-Tungaloy Manufacturer article number: 6903205 Manufacturer SKU: TUN6903205 Model series: ISO turning inserts Material: carbide Geometry: TNMG 220404 Data Included angle: 60° Plate thickness: 4.76 mm Size: 22 mm Corner radius: 0.4 mm Clearance angle: 0° Special features PVD coating, grade AH6225 Suitable for rostfreiem Stahl Triangular plate form Double-sided chipbreaker Cylindrical mounting hole ISO‑standard designation TNMG220404 Application: turning Compatibility depends on holder form, clearance angle, tolerance class, fastening, size and thickness FAQ Which materials is this insert suitable for? The TNMG220404 AH6225 insert is specified for rostfreiem Stahl and performs well in medium‑duty turning where a sharp, stable edge is required. What does the AH6225 grade indicate? AH6225 denotes a PVD‑coated carbide grade engineered for a balance of wear resistance and edge sharpness, aimed at broad rostfreiem Stahl applications. How is the insert clamped in a holder? The triangular insert uses a cylindrical mounting hole and is clamped with an appropriate TNMG‑compatible holder; compatibility is determined by form, clearance angle, tolerance class, fastening, size and thickness. How many usable edges does the insert provide? With its double‑sided chipbreaker and triangular form, the insert offers multiple usable cutting edges per index, increasing economy and reducing downtime. Is this insert suitable for internal turning? Yes; the TNMG220404 geometry and chip control features are suitable for both external and internal turning operations when paired with the correct holder and cutting parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 220404 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated AH6225 carbide grade, a sharp yet stable cutting edge, and ISO compatibility for dependable turning performance; order the TNMG220404 AH6225 insert via Metav Werkzeuge or consult the technical team for application advice. TNMG 220404 AH6225 — TNMG indexable insert for Turning by Tungaloy, PVD-coated carbide, 0.4 mm radius TNMG220404 AH6225 is an ISO-standard triangular indexable insert engineered for external and internal turning, offering a balance of edge sharpness and robustness for variable stainless-steel machining conditions PVD-coated AH6225 carbide Universal for stainless steels and mixed conditions 0.4 mm corner radius for fine finishing ISO TNMG220404 triangular insert, 60° angle Consistent chip control and improved surface quality The combination of a PVD-coated surface and the AH6225 carbide matrix delivers a reliable, sharp cutting edge that maintains stability during medium cutting operations. The double-sided chipbreaker is tuned for predictable chip formation, which reduces rework and contributes to a consistent surface finish on turned components. For workshops processing stainless and similar alloys, this results in fewer interruptions for chip evacuation and a lower risk of built-up edge, supporting steady cycle times and repeatable part quality. Designed for dependable system compatibility and secure clamping Built to the ISO TNMG220404 standard, the insert's triangular form and 60° included angle ensure straightforward matching to appropriate external holders and boring bars. Key mechanical details — 0.4 mm corner radius, plate thickness 4.76 mm, plate size 22 mm and the cylindrical hole — define the correct seating, tolerance and fastening method required by the toolholder. Compatibility is determined by form, clearance angle, tolerance class, fastening, size and thickness; the cutting system typically comprises the indexable insert, a suitable holder or boring bar, a shim/clamp set and replacement screws, ensuring safe and repeatable mounting. Optimised for stainless steels under variable conditions As a universal grade for stainless steels, the AH6225 specification achieves a compromise between wear resistance and a keen cutting edge, making it suitable for medium machining and operations with changing process stability. When working with varying feed or interrupted cuts, the insert's balance between toughness and hardness helps prevent premature edge failure, enabling productive machining and predictable tool life. Selection of the correct chipbreaker and matching of the insert to a stable clamping and holder arrangement will enhance performance in everyday workshop use. Contact Metav Werkzeuge for tailored machining recommendations or to place an order for the TNMG220404 AH6225 insert; email info@metav-werkzeuge.com or call +49 2822 7131930 for specialist advice and fast processing Technical data Article number: 6903224 Manufacturer SKU: TUN6903224 SKU: 6903224-Tungaloy Model series: ISO turning indexable inserts Material: Carbide Coating: PVD Application: Turning Dimensions & core data Corner radius: 0.4 mm Plate thickness: 4.76 mm Plate size: 22 mm Included angle: 60° Clearance angle: 0° Hole style: cylindrical hole Features & compatibility Grade: AH6225 (PVD-coated) Double-sided chipbreaker Triangular plate form (TNMG) ISO TNMG220404 standard Compatible with appropriate holders and shim sets FAQ What materials is this insert suitable for? The AH6225 grade is formulated as a universal option primarily for stainless steels, providing a balance of edge sharpness and wear resistance for medium machining tasks. How does the TNMG220404 geometry affect holder choice? The TNMG220404 triangular form with a 60° included angle and cylindrical hole requires holders sized for 22 mm plates and matching tolerance and clamping systems to ensure safe seating and repeatable performance. Is the insert reversible or double-sided? Yes, the TNMG220404 insert features a double-sided chipbreaker, allowing both sides to be used before reconditioning or replacement, effectively doubling indexable life per insert. Which components complete the cutting system for this insert? A correct system includes the indexable insert, a compatible external holder or boring bar, a shim/clamp set and properly sized replacement screws for secure fastening. What are the key dimensional values to check before ordering? Check the corner radius (0.4 mm), plate thickness (4.76 mm), plate size (22 mm) and included angle (60°) to ensure compatibility with the intended holder and application. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 220404 AH6225 Wendeplatten - Tungaloy
Benefit from the combination of a sharp, stable cutting edge and broad material suitability: the PVD-coated AH6225 grade and the ISO TNMG geometry ensure consistent mid-range performance in stainless steel turning. Order directly via Metav Werkzeuge or consult our advisors for selection guidance. TNMG220404 AH6225 — ISO turning insert for turning applications by Tungaloy A TNMG220404 AH6225 indexable triangular turning insert engineered for medium cutting conditions and reliable stainless steel machining. ISO triangular insert TNMG220404 PVD-coated carbide AH6225 grade Optimised for stainless steels Double-sided chipbreaker, cylindrical hole Precision and reliable cutting for productive turning The combination of a PVD-coated surface and a wear-resistant carbide substrate delivers a balanced edge that keeps cutting forces predictable and tool life stable. Designed for medium-depth cuts, this triangular insert with a 60° geometry produces consistent chip control and surface quality in rotational turning operations. The coated grade AH6225 is formulated to maintain a sharp, yet robust edge under varying conditions, reducing the need for frequent index changes and supporting uninterrupted production runs. Clear compatibility and secure clamping for quick tool changes Built to ISO dimensions, the triangular insert simplifies toolholder selection and changeover procedures. The specified form, clearance angle and tolerance class determine holder compatibility; the insert’s cylindrical hole and standard thickness allow straightforward seating and positive clamping in most ISO TNMG-compatible holders. Reduced set-up time and predictable fit translate into measurable process efficiency, particularly in batch production where repeatability and minimal adjustment are essential. Material adaptability and chip control that reduce rework This grade is optimised for machining stainless steels, offering a mix of wear resistance and edge stability that helps prevent built-up edge and excessive workhardening. The double-sided chipbreaker design aids consistent chip formation across a range of feeds, improving evacuation and lowering the risk of surface damage. For workshops processing a variety of stainless alloys, the insert provides a pragmatic balance between surface finish and productivity, making it suitable for both external and internal turning tasks. Practical handling, cost-effectiveness and application advice The insert’s triangular shape provides multiple indexing positions, increasing the number of usable edges per insert and improving cost-efficiency over time. With a corner radius of 0.4 mm and a plate thickness of 4.76 mm, it suits medium-accuracy turning where a controlled corner form is required. For optimum results, select an appropriate chipbreaker and cutting parameters that match workpiece clamping and machine rigidity; tailored feeds and speeds will extend life and reduce scrap rates, supporting a leaner machining process. Contact Metav Werkzeuge for availability and tailored application advice on the Tungaloy TNMG220404 AH6225 turning insert; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 6903223 SKU: 6903223-Tungaloy Manufacturer SKU: TUN6903223 Designation: TNMG220404 AH6225 Tungaloy insert Model series: ISO turning indexable inserts Facts Corner radius: 0.4 mm Plate thickness: 4.76 mm Size: 22 mm Insert angle: 60° ISO code: 220404 Special features Material: carbide Coating: PVD-coated Grade: AH6225 Application: turning Chipbreaker: double-sided Hole: cylindrical Shape: triangular Compatibility: ISO TNMG holders FAQ What materials is this insert suitable for? The TNMG220404 AH6225 insert is optimised for stainless steels, offering a balance between wear resistance and edge sharpness for consistent turning results. How does the AH6225 grade affect performance? The AH6225 grade provides a PVD-coated, wear-resistant surface that maintains a sharp cutting edge under medium machining conditions, which improves life and surface quality for turning tasks. Which holder types are compatible with this insert? Compatibility depends on holder form, clearance angle, tolerance class and plate thickness; the TNMG220404 is designed to fit standard ISO TNMG-compatible turning holders with a matching 60° seating. How many cutting edges are available per insert? The triangular geometry and reversible orientation provide multiple usable edges; the exact count depends on whether both sides are used and how the insert is indexed. What chip control features does the insert provide? A double-sided chipbreaker supports consistent chip formation across varied feeds, improving evacuation and helping to avoid surface damage during turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 220404 AH6235 Wendeplatten - Tungaloy
Benefit from a PVD-coated AH6235 carbide grade and a robust triangular geometry that ensure consistent chip control and long tool life in stainless steel turning; order directly via Metav Werkzeuge or consult the specialists for cutting-data recommendations. TNMG220404 AH6235 turning insert — Tungaloy, PVD-coated carbide, triangular 22 mm The TNMG220404 AH6235 is an ISO-standard triangular turning insert designed for external and internal turning operations, optimised for stainless steels and interrupted cuts. PVD-coated AH6235 carbide grade Triangular TNMG 22 mm insert, 0.4 mm radius Double-sided chipbreaker, with cylindrical hole ISO-standard for external and internal turning Consistent performance on stainless steels and difficult alloys The PVD-coated AH6235 carbide grade delivers a balance between toughness and wear resistance, making it particularly suited to stainless steel machining and operations with frequent interruptions. The coating reduces built-up edge and improves tool life under variable cutting conditions, while the substrate toughness helps resist chipping during hard-to-cut passes. This results in fewer insert changes and more predictable process windows, which supports higher machine utilisation and lower overall tooling costs. Secure clamping and precise geometry for repeatable results The triangular plate form with a 0° clearance and a 60° wedge angle provides a stable cutting edge and predictable engagement in the holder. The insert’s 0.4 mm corner radius and standard 22 mm seat ensure compatibility with ISO holders when form, clearance, tolerance class, fastening and thickness are matched. The cylindrical hole enables reliable fastening and positional accuracy, reducing vibration and promoting consistent surface finish when used in the correct holder system. Efficient chip control and application flexibility Equipped with a double-sided chipbreaker, this insert supports controlled chip formation for external and internal turning, reducing the risk of tangling and improving operator safety. The combination of grade and chipbreaker suits interrupted cuts and tasks with higher breakout risk; choosing this cutting geometry and PVD coating helps maintain edge integrity and surface quality, particularly in production environments where repeatability and uptime matter. Selection guidance and practical advantages for shops When selecting the insert, match the grade and chipbreaker to the workpiece material and the machine’s rigidity. The PVD-coated carbide construction is advantageous for demanding stainless-steel jobs, while the triangular shape offers three usable edges per side for economical usage. For integration into existing tool systems, confirm holder compatibility by checking form, free angle, tolerance class, fastening type, size and thickness to avoid misfits and to preserve the achieved performance benefits. Contact Metav Werkzeuge for tailored cutting data, availability and fast supply: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6903399 Manufacturer SKU: TUN6903399 Model series: ISO-Drehwendeschneidplatten Designation: TNMG220404 Numbers / Core technical data Insert size: 22 mm Thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Wedge angle: 60° Special features / Versions Material: carbide Coating: PVD Grade: AH6235 Plate form: triangular Chipbreaker: double-sided Hole: with cylindrical hole Typical application: external and internal turning; interrupted cuts; stainless steel machining System components: ISO insert, matching external holder or boring bar, shim/clamping set and replacement screws FAQ Which materials is this insert suitable for? The AH6235-grade insert is optimised for stainless steel and is intended for applications with interrupted cuts or higher breakout risk; the combination of PVD coating and a tough substrate supports these materials. What type of chip control does the insert offer? The double-sided chipbreaker provides controlled chip formation for both external and internal turning, improving evacuation and surface quality when used with appropriate cutting parameters. How many usable cutting edges are available on the insert? As a triangular, double-sided plate, the insert provides multiple usable edges; the exact count depends on whether both sides are indexed, but the geometry is designed for economical edge utilisation. Is the insert compatible with ISO toolholders? Yes. The TNMG220404 follows ISO dimensions and compatibility is determined by matching form, clearance, tolerance class, fastening, size and thickness with the chosen holder. What advantages does the PVD coating bring? The PVD coating reduces adhesive wear and built-up edge, enhancing surface finish and insert life in stainless-steel applications while maintaining the substrate’s resistance to chipping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 220404 AH6235 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH6235 carbide, robust 60° triangular geometry and a double-sided chipbreaker for reliable turning of stainless steels and interrupted cuts; order the TNMG220404 AH6235 insert directly via Metav Werkzeuge or request advice from our technical consultants. TNMG220404 AH6235 Tungaloy indexable insert — ISO turning insert, 60° triangular, r0.4 The TNMG220404 AH6235 is an ISO‑standard triangular indexable insert engineered for turning applications, optimised for stainless steels and interrupted cutting where edge stability is critical. PVD-coated carbide grade AH6235 For turning stainless steels and interrupted cuts Triangular ISO TNMG 220404, 60° geometry Double-sided chipbreaker, central cylindrical hole High stability and consistent performance for stainless steel turning The PVD‑coated carbide grade AH6235 is designed to deliver stable chip formation and extended edge life in demanding conditions. The coating reduces friction and improves resistance to built‑up edge during machining of stainless steels, while the tougher substrate helps resist chipping under interrupted cuts. For production environments where tool life and predictable performance matter, this combination translates into fewer insert changes and steadier cycle times. Geometry that supports adaptable clamping and precise cuts The 60° triangular geometry with a 0.4 mm corner radius gives a balance between strength and finish capability. The ISO TNMG form ensures compatibility with standard holders when matched by form, rake angle, tolerance class, fastening, size and thickness. The central cylindrical hole and double‑sided design allow rotating the insert when wear occurs, effectively doubling service life per part, which benefits throughput and reduces tooling logistics. Practical benefits explained for production planning Chipcontrol is provided by the double‑sided chipbreaker, which is tailored for turning operations and helps maintain consistent swarf evacuation—particularly useful in interrupted or unstable cuts. The insert’s moderate nose radius supports surface finish requirements without sacrificing edge robustness. In short, the component reduces unexpected stoppages and supports higher effective machining time per shift. Compatibility, handling and system considerations This item integrates into a standard ISO turning system: the insert, a compatible external holder or boring bar, a suitable shim/clamping kit and replacement screws. Material compatibility, holder choice and the chipbreaker selection should be matched to workpiece material, machining method and machine stability to exploit the insert’s productivity and process security advantages. For less experienced planners, the technical consultancy at Metav Werkzeuge can assist with selection and setup. Contact Metav Werkzeuge today for application advice on Tungaloy AH6235 inserts and ensure the TNMG220404 is specified correctly for enhanced process reliability Technical Data Article number: 6903408 Manufacturer SKU: TUN6903408 Model series: ISO‑turning indexable inserts Manufacturer: Tungaloy Facts Corner radius: 0.4 mm Insert thickness: 4.76 mm Insert size: 22 mm Geometry angle: 60° ISO designation: 220404 Special features Material: carbide Coating: PVD Grade: AH6235 Shape: triangular Hole: with central cylindrical hole Chipbreaker: double‑sided Application: turning (external and internal), interrupted cuts FAQ What materials is this insert suitable for? The TNMG220404 AH6235 insert is optimised for stainless steels and applications with interrupted cuts; the AH6235 grade offers tougher substrate characteristics for reliable edge control. How does the PVD coating help in machining? The PVD coating on the AH6235 grade reduces friction and improves wear resistance, supporting longer tool life and more consistent surface quality when turning stainless steels. Can the insert be used in standard TNMG tool holders? Yes, the ISO TNMG220404 form is compatible with standard TNMG holders provided form, relief angle, tolerance class, fastening method, size and thickness are matched. Is the insert reversible and how does that affect economy? This is a double‑sided insert with a central hole; reversing worn edges effectively extends insert service life and lowers tooling costs per machined component. What is the corner radius and how does it influence finish? The corner radius is 0.4 mm, which provides a compromise between edge strength and achievable surface finish for general turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNMG 220404 AH6235 Wendeplatten - Tungaloy
Take advantage of the PVD-coated AH6235 grade and the ISO TNMG form for reliable performance in demanding turning tasks; the robust carbide substrate and double-sided chipbreaker reduce downtime and support stable machining of stainless steel. Order directly via Metav Werkzeuge or consult the technical team for application-specific setup. TNMG 220404 AH6235 — Indexable turning insert for turning by Tungaloy The TNMG 220404 AH6235 is an ISO-standard triangular indexable insert designed for external and internal turning, optimised for machining stainless steel and intermittent cut conditions. PVD-coated carbide AH6235 for tough work ISO TNMG220404 triangular insert form Double-sided chipbreaker for interrupted cuts Cylindrical hole, compatible with standard holders Grade engineered for demanding stainless steel applications The AH6235 grade is a PVD-coated carbide developed for enhanced toughness when machining stainless steel and other difficult-to-machine alloys. The coating improves wear resistance while the tougher substrate mitigates edge chipping under interrupted cuts. This combination delivers a consistent cutting edge life and predictable tool change intervals, which supports production planning and reduces unexpected stoppages. The specification is particularly suited to operations where edge stability is critical. Geometry and ISO compatibility for predictable set-up The triangular ISO form with code 220404 and a corner radius of 0.4 mm provides a balance between strength and finishing ability. The insert thickness of 4.76 mm, inscribed circle size 22 mm and the 60° included angle conform to standard ISO holder interfaces; the insert features a cylindrical hole for secure clamping and a double-sided chipbreaker offering two usable cutting edges. The listed free angle is 0°, indicating a neutral clearance geometry suited to many turning profiles. Compatibility with a particular holder depends on insert form, clearance, tolerance class, fastening method, size and thickness. Operational gains: stable cutting, easier process control Use of this indexable insert reduces regrinds and simplifies inventory management by offering a robust edge for interrupted cuts and unstable setups. The double-sided chipbreaker improves chip control and can reduce cycle time by lowering the need for manual chip clearing. For finishing or medium cuts the small corner radius helps maintain surface quality without sacrificing edge life. Selecting the appropriate chipbreaker and grade according to component material and machine stability will maximise throughput and tool life while ensuring consistent surface results. For application advice or to order the Tungaloy TNMG 220404 AH6235 indexable insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or on +49 2822 7131930; consultants are available to confirm holder compatibility and cutting data Technical data Article number: 6903407 SKU: 6903407-Tungaloy Manufacturer SKU: TUN6903407 Brand: Tungaloy Model series: ISO turning inserts Dimensions / core data Insert designation: TNMG220404 Corner radius: 0.4 mm Thickness: 4.76 mm Inscribed circle / size: 22 mm Included angle: 60° Free angle: 0° Features / special characteristics Grade/coating: AH6235, PVD-coated carbide Plate shape: triangular Hole: with hole, cylindrical hole style Chipbreaker: double-sided Typical application: external and internal turning, interrupted cuts FAQ What materials is this insert optimised for? The AH6235 grade is optimised for machining stainless steel and other alloys where toughness and resistance to chipping are required; it is suitable for interrupted cuts. Which holder types are compatible with the insert? Compatibility is determined by insert form, clearance, tolerance class, fastening method, size and thickness; the TNMG220404 form fits standard ISO TNMG external and internal turning holders designed for a 22 mm inscribed circle. How many usable cutting edges does the insert provide? The insert is double-sided with a chipbreaker on both faces, offering two indexed cutting edges per insert for efficient edge usage. What benefits does the PVD coating deliver in practice? The PVD coating on the AH6235 grade increases wear resistance and helps maintain edge integrity, extending service life under demanding conditions. Is the insert suitable for finishing operations? With a 0.4 mm corner radius and neutral geometry, the insert can achieve good surface quality in finishing passes while retaining sufficient strength for mixed operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 220404 GH330 Wendeplatten - Tungaloy
Reliable and repeatable turning results are achieved by combining the GH330 wear‑resistant grade with the precise TNMG geometry and a 60° triangular form; this yields stable edge life and straightforward holder compatibility. Order the TNMG220404 GH330 Tungaloy insert directly via Metav Werkzeuge or consult our specialists for selection advice and application support. TNMG220404 GH330 Tungaloy indexable turning insert — 60° triangular, carbide grade GH330 The TNMG220404 GH330 Tungaloy is an ISO‑standard indexable turning insert intended for external and internal turning, offering robust cutting edge stability and broad applicability in conventional turning operations. ISO‑standard TNMG geometry, 60° triangular Carbide grade GH330 for wear resistance Double‑sided chipbreaker for economical indexing Cylindrical hole and 4.76 mm plate thickness Optimised for consistent turning performance The TNMG series is designed to deliver consistent cutting results across a variety of turning tasks. The combination of a carbide substrate and the GH330 grade extends tool life where moderate wear resistance and good edge stability are required. For production environments that prioritise uptime and repeatability, the insert’s geometry and grade work together to reduce unexpected tool changes and maintain surface finish standards. Selecting the correct chipbreaker and grade for the workpiece material optimises chip control and minimises rework, supporting a more economical machining process. Precise geometry for reliable holder compatibility The insert code TNMG220404 denotes an ISO triangular insert with a 60° included angle and a 0.4 mm corner radius, engineered to fit ISO‑compatible holders when matched by form, relief angle, tolerance class, clamping method, size and thickness. The nominal inscribed circle of 22 mm and plate thickness of 4.76 mm ensure mechanical stability during cutting. The specified 0° relief angle and the presence of a cylindrical hole allow secure fastening in conventional clamping systems. These geometric attributes translate into predictable cutting forces and repeatable positioning, which is essential for precision turning operations and quick insert indexing. Practical features that reduce machining costs Built as a double‑sided insert, the TNMG220404 supports economical tool usage by providing multiple indexed edges before replacement, helping to lower tooling costs per part. The cylindrical hole facilitates secure clamping and straightforward replacement, while the triangular three‑edge form gives flexibility for different toolholder setups. With a carbide body and a Tungaloy grade engineered for a balance of toughness and wear resistance, the insert is suited for a wide range of turning tasks when paired with the appropriate chipbreaker. The net effect is improved productivity through longer effective cutting times and reduced setup interruptions. Contact Metav Werkzeuge for tailored advice on the Tungaloy GH330 TNMG220404 insert, or request support from our specialists at +49 2822 7131930 or info@metav-werkzeuge.com Technical Data Article number: 6808582 Manufacturer SKU: TUN6808582 Internal SKU: 6808582-Tungaloy Model series: ISO‑indexable turning inserts Insert designation: TNMG220404 GH330 Tungaloy Facts Inscribed circle: 22 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Included angle: 60° Relief angle: 0° Manufacturer article number: 6808582 Special features Material: carbide Carbide grade: GH330 (Tungaloy) Plate form: triangular Hole: with cylindrical hole Chipbreaker: double‑sided Intended use: turning (external and internal) FAQ What materials is this insert suitable for? The TNMG220404 GH330 insert is intended for turning applications and the GH330 grade is chosen to balance wear resistance and edge stability; compatibility with specific materials depends on selecting a suitable chipbreaker and cutting parameters for the workpiece. How does the TNMG220404 designation relate to geometry? The code TNMG220404 indicates an ISO triangular insert with a 60° included angle and a 0.4 mm corner radius, designed for holders that match by form, relief angle and thickness. Can the insert be indexed on both sides? Yes, the insert has a double‑sided chipbreaker, allowing multiple index positions and economical use of all available cutting edges. What mounting features ensure secure clamping? The insert includes a cylindrical hole and a standard plate thickness of 4.76 mm, providing reliable clamping in compatible ISO toolholders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 220404 GH330 Wendeplatten - Tungaloy
The combination of ISO‑standard geometry, a GH330 Tungaloy carbide grade and a precise 0.4 mm nose radius delivers consistent tool life and predictable surface quality in turning operations; order the insert directly via Metav Werkzeuge or request application advice from the consultants. TNMG220404 GH330 — Indexable turning insert, 60° triangular, Tungaloy The TNMG220404 GH330 is an ISO‑standard triangular carbide insert designed for external and internal turning where wear resistance and cutting‑edge stability are required. ISO‑standard TNMG geometry for universal holders GH330 carbide grade for wear resistance 0.4 mm nose radius for precise finishing Double‑sided chipbreaker with central hole Consistent performance through standard geometry and measured tolerances The ISO‑compliant geometry ensures reliable seating and repeatable results in modern clamping systems. As an ISO‑standard insert with the designation 220404, the component fits holders that match form, tolerance class, fastening and thickness, reducing changeover time and setup variance. The triangular outline and 60° included angle provide stable engagement for both external and internal turning, while the central cylindrical hole facilitates secure fastening. This predictability supports higher first‑pass yields and fewer corrective operations. Material engineering for extended tool life and process stability Manufactured in cemented carbide of the GH330 grade by Tungaloy, the insert balances hardness and toughness to resist abrasive wear while maintaining edge integrity under interrupted cuts. The chosen grade extends tool life in a wide range of steels and alloys and lowers tooling costs per part through reduced indexing frequency. Where consistent surface finish and repeatable tool change intervals are essential, the GH330 composition provides an economical compromise between durability and edge stability. Geometry and chip control that improve machining reliability The 0.4 mm nose radius is sized for fine finishing without sacrificing strength at the cutting edge; this supports tighter dimensional control and improved surface quality on parts requiring close tolerances. The double‑sided chipbreaker aids predictable chip formation across a range of feeds and depths of cut, limiting chatter and evacuation problems. Together, these geometric features reduce the incidence of rework and allow stable machining strategies with conventional and higher cutting speeds. System considerations and best‑practice applications The insert thickness of 4.76 mm and triangular shape make it suitable for a broad selection of ISO TNMG holders; compatibility is determined by form, relief angle, tolerance class, fastening method, size and thickness. The insert is designed for turning applications and integrates into machining systems that prioritise repeatability and efficient indexability. For new setups or material mixes, process trials and cutting‑data adjustments are recommended to exploit the GH330 grade’s full potential while safeguarding component quality. Contact Metav Werkzeuge for tailored cutting data, application recommendations and to order the TNMG220404 GH330 Tungaloy indexable insert directly through the technical sales team. Technical data Article number: 6808577 Manufacturer SKU: TUN6808577 Metav SKU: 6808577-Tungaloy Model series: ISO turning indexable inserts Facts ISO designation: 220404 Corner radius: 0.4 mm Thickness: 4.76 mm Included angle: 60° Insert size: 22 Special features Cemented carbide, grade GH330 (Tungaloy) Triangular insert, with cylindrical hole Double‑sided chipbreaker Relief angle: 0° Intended application: Turning (external and internal) Compatibility determined by form, relief angle, tolerance, fastening, size and thickness FAQ What materials are suitable for machining with this insert? The TNMG220404 GH330 insert is designed to machine a broad range of steels and alloyed materials; the GH330 grade provides a balance of wear resistance and toughness for general turning tasks. Is the insert indexable on both sides? Yes, the insert features a double‑sided chipbreaker, allowing indexability on both cutting faces to maximise usable edges before replacement. How does the 0.4 mm nose radius affect surface finish? A 0.4 mm radius improves surface finish and dimensional control in finishing passes while maintaining sufficient edge strength for most turning operations. What must be checked to ensure holder compatibility? Holder compatibility depends on matching the TNMG form, relief angle, tolerance class, fastening method, size and thickness; verify these parameters against the holder specifications prior to installation. Which designation should be quoted when ordering or requesting data? Please reference the designation TNMG220404 GH330 and the article number 6808577 (Manufacturer SKU: TUN6808577) when requesting cutting data or placing an order. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 220404 GH330 Wendeplatten - Tungaloy
Take advantage of the ISO-standard geometry and the GH330 grade to secure consistent edge life and simplified tool management; the combination of a cemented carbide substrate, a 0.4 mm nose radius and a double-sided chipbreaker enables efficient turning cycles with reduced downtime. Order the insert via Metav Werkzeuge or consult the team for application matching and stock information. TNMG220404 GH330 Tungaloy indexable insert — triangular ISO turning insert with 60° cutting angle The TNMG220404 GH330 Tungaloy insert is an ISO‑standard triangular turning insert designed for external and internal turning applications, offering a balanced mix of wear resistance and edge stability for general-purpose turning. ISO-standard TNMG geometry, 60° triangle GH330 grade for wear resistance and toughness Cemented carbide substrate for long tool life 0.4 mm nose radius for versatile finishing Double-sided chipbreaker with cylindrical hole Precise ISO geometry for repeatable, accurate turning The ISO designation and triangular form provide a predictable and repeatable seating in compatible holders, which reduces set-up time and ensures consistent cutting geometry across batches. The 60° cutting angle and 0° relief angle contribute to a stable cutting edge under varied cutting conditions, while the central cylindrical hole guarantees secure clamping in standard clamping systems. This standardisation means fewer adjustments when replacing inserts, supporting steady production and reliable part tolerances. Advanced GH330 grade for extended edge stability The Tungaloy GH330 grade integrates wear resistance with sufficient toughness to withstand intermittent cutting loads and edge stress. Mounted on a cemented carbide substrate, the grade is engineered to preserve cutting-edge integrity over longer cycles, which helps to reduce the frequency of index changes and tool inventory costs. The double-sided chipbreaker improves chip control and assists in maintaining surface quality, particularly when the machining strategy prioritises a balance between life and finish. Versatile geometry for finishing and general machining A 0.4 mm nose radius offers a compromise between fine surface finish and the capacity to absorb moderate cutting forces, making the insert suitable for both light finishing and certain medium-duty operations. The plate thickness of 4.76 mm and 22 mm size deliver the mechanical support required for stable cuts. The insert’s triangular shape provides three usable cutting edges per side, while the double-sided chipbreaker allows reversing for extended edge utilisation, enhancing overall cost efficiency per edge. System compatibility and practical handling benefits This insert performs best as part of a complete ISO system: an ISO insert, a matching external holder or boring bar, shims/clamp sets and replacement screws. Compatibility is determined by form, relief angle, tolerance class, fastening, size and thickness, so selecting the correct holder is essential for optimal performance. The indexable design reduces changeover times and inventory complexity, and the robust construction supports repeatable clamping and predictable tool life, which together help to maintain a smooth production flow. Contact Metav Werkzeuge for application-specific recommendations on Tungaloy turning inserts or to request availability; email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt assistance Technical Data Article number: 6836610 SKU: 6836610-Tungaloy Manufacturer SKU: TUN6836610 Name: TNMG220404 GH330 Tungaloy‑Wendeplatte Material: cemented carbide Facts Radius: 0.4 mm Cutting angle: 60° Relief angle: 0° Plate thickness: 4.76 mm Plate size: 22 mm Features ISO‑standard triangular indexable insert Double‑sided chipbreaker Cylindrical central hole for secure clamping Compatible with ISO turning holders and clamping sets GH330 Tungaloy grade for balanced wear resistance and toughness FAQ What holders are compatible with this TNMG insert? Compatibility is determined by the insert’s form, relief angle, tolerance class, fastening method, size and thickness; the TNMG220404 GH330 insert fits standard ISO TNMG‑type external holders and appropriate boring bars when the holder matches those parameters. How many cutting edges are available per insert? The triangular geometry provides three cutting edges per side; with the double‑sided design of the TNMG220404 GH330 insert, multiple edges can be indexed to extend usable life. Is the GH330 grade suitable for heavy interrupted cuts? The GH330 grade balances wear resistance and toughness to offer good edge stability; for heavily interrupted cuts, review holder rigidity and cutting parameters to ensure suitability with the TNMG220404 GH330 insert. What does the 0.4 mm nose radius mean for surface finish? A 0.4 mm nose radius yields a compromise between surface quality and cutting robustness, enabling finer finishes than larger radii while still tolerating moderate cutting forces when using the correct machining strategy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNMG 220404 GT720 Wendeplatten - Tungaloy
Take advantage of the combination of GT720 cermet for superior surface finish, the ISO TNMG220404 form for straightforward holder compatibility, and the double-sided geometry for efficient indexability — order directly via Metav Werkzeuge or consult our specialists if clarification is required. TNMG 220404 GT720 Tungaloy turning insert — cermet grade for finishing and light turning The TNMG220404 GT720 Tungaloy insert is an ISO-standard triangular turning insert engineered for finishing to light turning of steel, prioritising surface quality and dimensional consistency ISO TNMG 220404 triangular insert GT720 cermet for fine finishing Double-sided chipbreaker, with hole 60° cutting angle, 0° clearance, 0.4 mm radius Delivering consistent surface finish and dimensional control The GT720 cutting grade combines the benefits of a cermet composition with a geometry tuned for fine finishing, so machining delivers improved surface finish and tighter tolerances with reduced burr formation. A controlled, steady wear pattern contributes to predictable component quality over the life of the edge, reducing rework. For practical use, the modest corner radius and the finishing-oriented grade mean fewer passes are needed to meet dimensional specifications, which supports higher first-pass yield in series production. Predictable chip control and reliable process stability The triangular insert with a double-sided chipbreaker and a cylindrical hole supports repeatable clamping and reliable chip formation under stable conditions. The TNMG220404 form, combined with a 0° clearance angle and a 60° cutting geometry, encourages consistent cutting forces and helps maintain tool orientation in external or internal turning. Where process stability is limited, selecting the appropriate chipbreaker and matching holder tolerance class reduces vibration and improves tool life, delivering more predictable cycle times in day-to-day workshop operations. Practical compatibility and efficient use in turning setups Designed as part of the ISO series, this insert offers straightforward interfacing with standard external holders and boring bars; compatibility depends on form, free angle, tolerance class, fixing method, size and thickness. The 0.4 mm corner radius supports fine finishing on steel components, while the double-sided format enhances cost-efficiency through simple indexing. For light to finishing cuts, the cermet grade is especially effective on steel workpieces where consistent edge condition and excellent surface integrity are required. For precision finishing with Tungaloy technology, request the TNMG220404 GT720 insert via Metav Werkzeuge or contact our technical team at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice Technical data Article number: 6851544 SKU: 6851544-Tungaloy Manufacturer SKU: TUN6851544 Manufacturer item number: 6851544 Facts Size: 22 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Cutting angle: 60° Clearance angle: 0° Hole: with hole (cylindrical) Special features Model series: ISO turning inserts Grade/coating: GT720 (cermet) Cutting material type: cermet or coated cermet Insert shape: triangular Chipbreaker: double-sided Typical application: turning (external and internal) Mounting compatibility: determined by form, clearance angle, tolerance class, fixing, size and thickness FAQ What applications suit this TNMG220404 GT720 insert? The TNMG220404 GT720 Tungaloy insert is optimised for finishing to light turning of steel components where surface quality and dimensional accuracy are priorities. Can the insert be used for internal boring as well as external turning? Yes, the ISO TNMG220404 form is suitable for both external and internal turning when paired with an appropriate boring bar or external holder compatible with the insert geometry. How many edges are available per insert? The triangular, double-sided geometry provides multiple indexable edges, allowing economical use and straightforward re-indexing in production. Which materials is this grade best for? GT720 is a finishing-oriented cermet grade recommended primarily for steel; matching the chipbreaker and cutting data to workpiece stability enhances results. What determines holder compatibility for this insert? Compatibility depends on the insert form, clearance angle, tolerance class, fixing method, size and thickness — ensure the holder accepts TNMG 220404 ISO inserts and the fixing matches the insert hole style Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 220404 NS9530 Wendeplatten - Tungaloy
Benefit from the combination of precise finishing, low cutting forces and simple indexability for a smooth turning process; order inserts or request grade advice via Metav Werkzeuge for immediate availability. TNMG220404 NS9530 ISO indexable turning insert by Tungaloy — 60° triangle, 0.4 mm corner radius A TNMG220404 NS9530 insert designed for finishing turns in steel, offering a sharp cutting edge and low cutting forces for continuous cuts and high surface quality ISO triangle insert TNMG 220404, 60° geometry Uncoated cermet grade NS9530 for fine finishing 0.4 mm corner radius for superior surface finish Double-sided insert with cylindrical hole for clamping High-quality finishing for steel components The uncoated cermet grade NS9530 was developed as a finishing grade for steel, combining a very sharp cutting edge with low cutting forces to produce consistently high surface quality. In practice, this means stable cutting at the low depths typical of finishing passes and reduced tendency for built-up edge on continuous cuts. The cermet substrate provides excellent wear resistance and leaves a fine surface without the need for additional coatings, making it particularly suitable where optical surface quality and dimensional tolerance are critical. Reliable fit and secure clamping for production use The insert follows the ISO indexable format and is supplied as a triangular insert with a 60° included angle, 0.4 mm corner radius and a 4.76 mm plate thickness. Compatibility with a chosen holder is determined by form, relief angle, tolerance class, fastening method, size and thickness; the cylindrical hole and double-sided geometry facilitate straightforward clamping and economical use of the cutting edges. Selecting the correct chipbreaker and grade according to the workpiece material and machine stability ensures repeatable results and minimises set-up time on the shop floor. Economical machining and straightforward tool handling Using a double-sided, indexable insert reduces tooling costs per edge and speeds tool changeovers; a typical system consists of the insert, a suitable external holder or toolbar, a shim or clamp set and replacement screws. The TNMG220404 design supports short interruptions between passes and is optimised for continuous finishing operations, improving throughput without compromising surface finish. For applications requiring predictable tool life and easy edge changes, this insert offers a balance of precision, economy and practical handling that supports steady production runs. Contact Metav Werkzeuge for expert advice on Tungaloy TNMG220404 NS9530 inserts, including availability and grade selection; eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998209-Tungaloy Manufacturer article number: 6998209 Manufacturer SKU: TUN6998209 Model series: ISO-indexable turning inserts Core specifications ISO designation: 220404 Size: 22 mm Thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Included angle: 60° Special features Grade: NS9530 (uncoated cermet) Insert shape: triangular Hole: with cylindrical hole for clamping Chipbreaker: double-sided Application: turning System: ISO indexable insert compatible with matching holder, shim and fasteners FAQ What materials is this insert intended for? The NS9530 grade is specified for finishing steel; the TNMG220404 insert is optimised for continuous turning of steel components where a fine surface finish is required. How is the insert clamped in the toolholder? Clamping is achieved via the central cylindrical hole and a compatible clamp or screw system; the triangular plate form and double-sided design support economical indexing and secure mounting. What does the NS9530 designation mean for performance? NS9530 denotes an uncoated cermet finishing grade with a sharp cutting edge, engineered for low cutting forces and high surface quality during finishing passes. Can this insert be used for roughing operations? This insert is primarily a finishing grade; for heavy roughing it is advisable to choose a grade and chipbreaker designed for higher depth of cut and greater toughness than NS9530. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 220404 NS9530 Wendeplatten - Tungaloy
Take advantage of ISO compatibility, a sharp uncoated cermet cutting edge and a compact corner radius for superior finishing on steel; for precision turning applications this insert delivers low cutting forces and consistent surface quality. Order directly via Metav Werkzeuge or consult our specialists for application-specific advice. TNMG220404 NS9530 – Turning insert, uncoated cermet, 0° clearance, Tungaloy A TNMG220404 NS9530 indexable turning insert engineered for fine finishing of steel, offering a sharp cutting edge and a compact corner radius for low cutting forces and high surface quality Uncoated cermet grade NS9530 Sharp cutting edge for fine finishing Corner radius 0.4 mm for high surface quality Double-sided chipbreaker for consistent chips Precision finishing with low cutting forces The insert is designed as an ISO-standard turning insert, optimised for finishing passes on steel where surface quality and dimensional consistency are critical. The uncoated cermet NS9530 provides a sharp, wear-resistant cutting edge that reduces built-up edge and requires lower cutting forces compared with conventional grades. The result is an improved surface finish and more stable tool behaviour during continuous cuts and small depths of cut. For machinists and production engineers this means fewer reworks and a predictable process window. Secure clamping and straightforward compatibility Being an ISO-design plate, compatibility with holders depends on form, clearance, tolerance class, fastening and plate thickness. The triangular format with a cylindrical hole allows reliable clamping in standard TNMG holders; the plate thickness of 4.76 mm and the included angle of 60° are compatible with matching ISO tooling systems. The secure clamping and double-sided chipbreaker ensure repeatable performance, making tool changeovers faster and minimising downtime in batch production. Controlled chip formation and surface integrity The double-sided chipbreaker is tailored for continuous cutting conditions and small feeds, producing controlled chip shapes that aid extraction and reduce tool interference. The compact corner radius of 0.4 mm balances edge strength with a fine surface finish, while the 0° clearance supports minimal rubbing and precise geometry reproduction. In practice, this means a stable cutting process and consistent part finish even on high-volume finishing operations. Material and application clarity for process planning Constructed on a cemented carbide substrate with an uncoated cermet cutting layer, the insert is specifically intended for finishing steel where sharpness and surface quality are prioritised. The chemistry and microstructure of the cermet grade reduce adhesion and maintain edge definition across typical finishing feeds. Process planners benefit from a predictable tool life and consistent results, especially when pairing the insert with rigid setups and optimised cutting parameters. For precision finishing applications, specify the Tungaloy NS9530 cermet insert via Metav Werkzeuge for fast supply and expert application support Technical data Article number: 6998223 SKU: 6998223-Tungaloy Manufacturer SKU: TUN6998223 Manufacturer: Tungaloy Model series: ISO turning indexable inserts Grade: NS9530 Cutting material: uncoated cermet Specifications Size: 22 mm Thickness: 4.76 mm Corner radius: 0.4 mm Included angle: 60° Clearance angle: 0° Hole style: cylindrical Plate shape: triangular Features & applications Double-sided chipbreaker For finishing steel Compatible with ISO holders For continuous cuts and small depths of cut Triangular insert with hole for secure clamping Sharp cutting edge for low cutting forces and high surface finish FAQ Is this insert suitable for finishing steel? Yes. The TNMG220404 NS9530 insert by Tungaloy is a finishing grade specifically designed for steel, offering a sharp cutting edge and low cutting forces for high surface quality. Does the insert require a specific holder type? Compatibility is governed by ISO form, clearance, tolerance class, fastening, size and thickness; the triangular TNMG format with a cylindrical hole fits standard TNMG holders when those parameters match. What is the advantage of the NS9530 cermet grade? The NS9530 uncoated cermet provides a sharp edge and good wear resistance for continuous finishing cuts, improving surface integrity and reducing the tendency for built-up edge. Can the TNMG220404 be used for interrupted cuts? The insert is optimised for continuous cutting and small depths of cut; for heavy interrupted cuts other grades or edge geometries may be preferable. How does the corner radius affect the finish? The 0.4 mm corner radius on the TNMG220404 balances edge strength with a fine surface finish, enabling consistent dimensional results on finishing passes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 220404 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp cutting edge, low cutting forces and ISO compatibility for consistent finishing performance; order the TNMG220404 NS9530 Tungaloy insert directly via Metav Werkzeuge or consult the team for application advice. TNMG220404 NS9530 – Tungaloy ISO turning indexable insert, uncoated cermet finishing grade TNMG220404 NS9530 is an ISO‑standard triangular indexable insert engineered for turning operations, particularly finishing steel with low cutting forces and excellent surface quality. Uncoated cermet finishing grade NS9530 Sharp cutting edge for high surface quality 60° triangular ISO form, 0.4 mm radius Double-sided chipbreaker with central hole Precision finishing for demanding steel turning The uncoated cermet NS9530 is formulated for finishing applications where surface quality and low cutting forces are decisive. With a sharp cutting edge and a small 0.4 mm nose radius, this insert favours continuous cuts and small depths of cut, reducing built‑up edge and leaving an improved finish on turned components. The carbide substrate provides dimensional stability under typical finishing feeds, making the insert suitable for repeated production runs where part tolerances and surface integrity matter. Reliable fit and simple integration into existing tool systems As an ISO turning indexable insert, compatibility is determined by geometry, clearance angle, tolerance class, clamping method, size and thickness. The TNMG form and 60° triangle ensure straightforward replacement in standard triangular holders or compatible boring bars; thickness 4.76 mm and inscribed circle 22 mm match common holder specifications. The insert is supplied with a cylindrical central hole and a double‑sided chipbreaker, enabling indexing to fresh cutting edges and stable clamping. Where tool systems require a shim or clamping set and replacement screws, the insert becomes part of a predictable system assembly that supports repeatable production. Productivity and machining advantages for short‑cycle finishing Choosing an uncoated cermet finishing grade like NS9530 helps to lower cutting forces and reduce vibration during fine turning, which benefits both tool life and machine load. The small corner radius and keen edge geometry support superior surface results without aggressive feeds, while the double‑sided chipbreaker assists chip control in continuous turning. For manufacturers processing steel where minimal material removal per pass is required, this indexable insert offers a cost‑efficient route to consistent finishes and reduced secondary operations. For precise finishing of steel components, consider the Tungaloy TNMG220404 NS9530 insert — contact Metav Werkzeuge for availability and tailored machining advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6998222 Manufacturer SKU: TUN6998222 SKU: 6998222-Tungaloy Brand: Tungaloy Model series: ISO turning indexable inserts Facts Angle: 60° Thickness: 4.76 mm Inscribed circle: 22 mm Corner radius: 0.4 mm Relief/clearance angle: 0° Hole: with cylindrical hole Special features Uncoated cermet grade NS9530 Carbide substrate TNMG triangular insert form Double-sided chipbreaker Application: turning; finishing steel; continuous cuts and small depths of cut Compatibility determined by form, clearance angle, tolerance class, clamping, size and thickness FAQ What is the primary application for this insert? The TNMG220404 NS9530 insert is designed for turning operations, specifically finishing steel where low cutting forces and superior surface finish are required. Can the insert be indexed to a fresh edge? Yes, the double‑sided design and central cylindrical hole permit indexing to additional cutting edges for extended usage cycles. Which holders are compatible with this ISO form? Standard triangular ISO holders and boring bars that accept TNMG‑form inserts with an inscribed circle of 22 mm and a thickness of 4.76 mm are compatible. Is the NS9530 grade coated or uncoated, and what does that mean for finishing? NS9530 is an uncoated cermet finishing grade; this provides a sharp cutting edge and low cutting forces, optimised for fine surface quality in continuous turning operations. How does the 0.4 mm radius affect the machining result? A 0.4 mm nose radius balances edge strength and surface finish, improving dimensional control and enabling smooth part surfaces with modest feed rates. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNMG 220404 T6215 Wendeplatten - Tungaloy
Efficient, wear-resistant performance from a CVD-coated carbide grade combined with the ISO TNMG geometry ensures consistent chip control and extended tool life; ideal for stable to lightly interrupted turning of stainless steel. Order directly via Metav Werkzeuge or ask our consultants for application advice. TNMG220404 T6215 ISO turning insert — CVD-coated carbide, 60° triangle, Tungaloy The TNMG220404 T6215 is an ISO-standard triangle insert designed for external and internal turning, offering a wear-resistant coating and a double-sided chipbreaker for stable cutting of stainless steel. CVD-coated carbide grade T6215 Suitable for stainless steel turning Triangle insert with 60° cutting angle Double-sided chipbreaker, with cylindrical hole Consistent cutting life through a wear-resistant grade The insert uses a CVD-coated carbide substrate formulated as T6215, which provides high abrasion resistance and more predictable flank wear under continuous and lightly interrupted cuts. This results in longer tool life and reduced regrinding frequency, supporting uninterrupted production cycles. The benefit for operations is a lower cost per component due to fewer tool changes and steady component quality when machining stainless steel. Geometry engineered for repeatable accuracy and mounting compatibility Featuring the ISO TNMG form with a 60° cutting angle and a 0° clearance specification, the indexable plate delivers stable engagement and dimensional control for both external and internal turning. The 0.4 mm corner radius helps balance edge strength and surface finish, while the cylindrical hole enables secure clamping and straightforward indexing in standard holders. As a result, process set-up is simplified and repeatability between shifts is improved. Chip control and productivity in serial production A double-sided chipbreaker on the insert enhances chip control and evacuation, which reduces the risk of built-up edge and improves surface quality on turned parts. Utilising both sides of the plate makes the component economical in high-volume environments, and the insert’s compatibility with ISO holder standards supports rapid replacement and minimal downtime. For workshops seeking reliable throughput, this grade offers a pragmatic balance of durability and machining performance. Contact Metav Werkzeuge for availability and application consultation on Tungaloy turning inserts — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: 6903040 Manufacturer SKU: TUN6903040 SKU: 6903040-Tungaloy Model: TNMG220404 T6215 Tungaloy-Wendeplatte Series: ISO turning inserts Facts Corner radius: 0.4 mm Cutting angle: 60° Clearance angle: 0° Plate thickness: 4.76 mm Plate size: 22 mm Special features CVD-coated carbide (T6215) Double-sided chipbreaker Triangle plate geometry With cylindrical hole Application: Turning Suitable for stainless steel FAQ What materials is this insert suitable for? The TNMG220404 T6215 insert is specified for machining stainless steel and performs best under stable to lightly interrupted turning conditions. How is chip control achieved with this grade? Chip control is provided by the double-sided chipbreaker and the CVD-coated surface, which together reduce built-up edge and promote consistent chip formation when turning stainless steel. Can the insert be indexed and reused on both sides? Yes, the insert is double-sided and indexable; both faces can be used to extend service life and reduce tooling costs in serial operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 220404 T9215 Wendeplatten - Tungaloy
High wear resistance, reliable chip control and a compact triangular form provide consistent productivity in medium steel turning; combine the T9215 grade and ISO geometry for predictable tool life and minimal downtime. Order genuine Tungaloy inserts via Metav Werkzeuge or consult our application specialists for tailored recommendations. TNMG220404 T9215 turning insert — triangular 60° by Tungaloy The TNMG220404 T9215 is an ISO-compliant triangular indexable insert for turning, engineered for medium steel machining with a robust chipbreaker and CVD-coated carbide for extended life CVD-coated carbide grade T9215 Triangular 60° geometry, 0° clearance Double-sided chipbreaker for stable chips ISO compatibility for standard turning holders Consistent productivity for medium steel turning The CVD-coated carbide in grade T9215 combines high wear resistance with reliable fracture strength, making it a practical choice for continuous to lightly interrupted cuts in medium steel. The coating reduces flank wear and improves heat resistance, which translates into longer tool life and fewer indexings; this improves net machining time and lowers tooling-related downtime. Compatibility with holders depends on form, clearance angle, tolerance class, fastening and thickness, so ISO conformity ensures straightforward replacement and predictable performance in standard turning systems. Geometry and clamping that secure repeatable accuracy A 60° triangular included angle and a 0° clearance set-up give a balance between edge strength and access to the workpiece. The 0.4 mm corner radius provides a defined edge for medium finishing operations while the 4.76 mm thickness contributes to stability under typical cutting forces. The insert is supplied with a cylindrical hole for secure fastening to the seat, and the double-sided chipbreaker offers controlled chip formation, reducing the risk of entanglement and improving surface consistency. Together these features support repeatable results across batch production. Integration into the production flow and selection guidance The insert is designed to function as part of an ISO system: indexable insert, matching external holder or boring bar, appropriate shim/clamp set and a replacement screw. Selecting the double-sided chipbreaker and the T9215 grade according to workpiece material and machining stability allows operators to maximise productivity while maintaining surface quality. For less experienced planners, the neutral clearance and robust geometry make the insert forgiving in mixed-production environments, while experienced users will benefit from the high cut-rate capability and consistent tool life that reduce rework and increase throughput. Contact Metav Werkzeuge for genuine Tungaloy TNMG220404 inserts, stock availability and application advice — email info@metav-werkzeuge.com or call +49 2822 7131930 for fast technical support and supply coordination Technical Data Article number: 6772331 Manufacturer SKU: TUN6772331 Product SKU: 6772331-Tungaloy Designation: TNMG220404 T9215 Material: Carbide Grade: T9215 Series: ISO turning indexable inserts Application: Turning Manufacturer: Tungaloy With hole: cylindrical hole Core data Insert size: 22 mm Thickness: 4.76 mm Corner radius: 0.4 mm Included angle: 60° Clearance angle: 0° Double-sided: yes Special features CVD-coated carbide Double-sided chipbreaker ISO-compliant triangular insert For continuous to light interrupted cuts Cylindrical hole for secure fastening Compatible with standard ISO holders FAQ Is this insert suitable for general steel turning? The TNMG220404 T9215 insert is intended as a first choice for medium steel machining and combines wear resistance with fracture safety for productive steel turning. How many cutting edges are available per insert? This triangular insert is double-sided, providing multiple indexable edges before disposal. What holder characteristics are required for compatibility? Compatibility is determined by insert form, clearance angle, tolerance class, fastening method, size and thickness; standard ISO triangular holders that accept 22 mm TNMG inserts are suitable. Can the insert handle light interrupted cuts? Yes; the T9215 grade and robust geometry are designed to perform in continuous to light interrupted cutting conditions. What does the chipbreaker offer for machining? The double-sided chipbreaker provides controlled chip formation, improving chip evacuation and surface consistency during turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com