TNMG 160412 T9235 Wendeplatten - Tungaloy
Benefit from the TNMG160412’s T9235 toughness and CVD-coated carbide for dependable performance in interrupted and unstable turning; its 60° triangular form with a double-sided chipbreaker supports efficient indexing and consistent chip control. Order directly via Metav Werkzeuge or ask our consultants for tailored advice. TNMG160412 T9235 TNMG Turning Insert — CVD-coated Carbide, 60° by Tungaloy The TNMG160412 T9235 is a precision ISO-standard turning insert for external and internal turning, designed for unstable conditions and interrupted cuts. CVD-coated carbide for reliable wear resistance Grade T9235 for unstable or interrupted turning 60° triangular shape with double-sided chipbreaker 1.2 mm corner radius, cylindrical hole, 4.76 mm thick Durable cutting for unstable and interrupted turning The insert’s CVD-coated carbide substrate and the T9235 grade provide a combination of toughness and wear resistance that is particularly effective for machining steel under lower cutting speeds or where vibrations and interruptions are frequent. Choosing a tough grade reduces the risk of premature chipping and fracture, which in turn maintains tool life and reduces downtime. For production environments facing variable conditions, this results in more predictable tool performance and fewer unplanned insert changes, supporting a smoother production flow and higher process reliability. ISO compatibility and quick indexing for productivity gains Built to ISO geometry as a TNMG size, the triangular 60° form allows for stable mounting in standard holders; compatibility is determined by form, clearance angle, tolerance class, fastening and thickness. The insert is double-sided, giving two usable edges per side and enabling fast indexing to restore cutting geometry without complicated regrinding. Key dimensions such as a 1.2 mm corner radius and 4.76 mm thickness, together with a cylindrical hole, facilitate secure clamping and consistent seat contact. These features shorten setup time and simplify inventory management, making the component well suited to job shops and production lines seeking economical, repeatable operations. What the coating and grade mean in practice A CVD coating forms a hard, wear-resistant layer that protects the carbide substrate while retaining a resilient core, which is crucial when machining steels with interrupted cuts. The T9235 specification indicates a tougher grade intended for lower speed ranges where mechanical shock and variable cutting forces occur; this yields stable chip formation and reduced tendency for edge breakdown. For engineers less familiar with insert technology: selecting this insert means prioritising robustness over maximum speed — a practical choice where tool life and surface consistency are paramount. The component is tailored for use in both external and internal turning operations and integrates into a system with a matching holder, clamping set and replacement screws for complete readiness. For ordering or specific process recommendations for the Tungaloy T9235 turning insert, contact Metav Werkzeuge for expert guidance and fast supply at info@metav-werkzeuge.com or +49 2822 7131930 — our consultants will assist with holder compatibility and grade selection Technical data Article number: 6785954 Manufacturer SKU: TUN6785954 SKU: 6785954-Tungaloy Model series: ISO-Drehwendeschneidplatten Plate designation: TNMG160412 Grade/coating: T9235, CVD-coated Material: carbide Facts Corner radius: 1.2 mm Plate size: 16 mm Thickness: 4.76 mm Form/angle: triangular, 60° Clearance angle: 0° Hole style: cylindrical hole Special features Double-sided chipbreaker ISO-standard TNMG geometry Application: external and internal turning Suited to unstable conditions and interrupted cuts Compatibility determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suited for? The TNMG160412 T9235 insert is formulated for machining steel; the T9235 grade and CVD coating make it especially suitable for steel under unstable or interrupted cutting conditions. How does the CVD coating help in daily use? A CVD-coated carbide layer on the insert improves wear resistance while the carbide core provides toughness; this combination benefits the TNMG160412 by reducing flank wear and improving edge life during demanding turning tasks. Is the insert compatible with standard TNMG holders? Yes — the insert follows ISO TNMG geometry; compatibility with a holder depends on matching the form, clearance angle, tolerance class, fastening method, size and thickness. How many cutting edges does the insert provide? The triangular, double-sided design gives multiple indexable cutting edges, enabling quick rotation to a fresh edge and efficient use of the insert’s lifetime. Which cutting conditions are recommended for T9235 grade? The T9235 grade is optimised for lower to moderate cutting speeds with intermittent cuts or unstable machining; it prioritises edge robustness and fracture resistance over maximum speed. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160412 T9235 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide toughness, precise 1.2 mm corner radius and ISO compatibility to maintain stable turning under interrupted cuts; order via Metav Werkzeuge or consult our specialists for application-specific advice. TNMG160412 T9235 TNMG turning insert for Drehen – Tungaloy TNMG160412 T9235 is an ISO-format triangular turning insert designed for external and internal turning operations in demanding steel applications. CVD-coated carbide grade T9235 for steel ISO TNMG160412 triangular insert, 60° geometry 1.2 mm corner radius for robust edge strength Double-sided insert with cylindrical hole for stability Consistent cutting performance for unstable conditions The insert delivers consistent cutting performance in applications where vibration or interrupted cuts occur. The CVD-coated surface improves edge resistance while the carbide substrate provides toughness under shock loads. As a result, quieter toolpaths and reduced edge chipping can be expected when the correct feed and speed parameters are selected. By selecting the appropriate chipbreaker and grade for the workpiece, production uptime is supported and tool-change frequency is lowered, which contributes to more predictable cycle times and lower overall machining cost. System compatibility and secure clamping for predictable results Compatibility is governed by insert form, relief angle, tolerance class, clamping method, size and thickness. The ISO TNMG format with 60° geometry and a cylindrical hole facilitates secure fastening in standard clamping systems, ensuring repeatable positioning and axial stability. The triangular shape and double-sided design provide multiple usable edges, improving tool economy. When paired with a suitable ISO external holder or boring bar, the insert supports robust set-ups even in less rigid conditions, translating to improved dimensional consistency on turned components. Optimised grade and chip control for steel turning The T9235 grade is a tough, CVD-coated carbide developed for steels at reduced cutting speeds and for applications with intermittent engagement. Its composition prioritises edge strength and wear resistance rather than maximum cutting speed, making it suitable for mixed batch work and components with variable clamping. The doppelseitig chipbreaker style (double-sided) assists in chip control across a range of feeds, reducing re-cutting of chips and helping to maintain surface finish without aggressive cutting parameters. Practical advantages at the machine and shopfloor level A 1.2 mm corner radius offers a balance between edge strength and achievable surface finish, while the 4.76 mm thickness and 16 mm size support stable contact with the holder under typical turning loads. The insert’s design simplifies inventory management: a single ISO TNMG insert can be used across multiple holders that accept the format, reducing tooling variants. For complex or high-value components, Metav Werkzeuge can provide application guidance and recommend matching holders, screws and backing pads to optimise life and process reliability. For machining advice or order placement for Tungaloy TNMG160412 T9235 inserts, contact Metav Werkzeuge for tailored recommendations and prompt delivery from Metav Werkzeuge Technical data Article number: 6785840 SKU: 6785840-Tungaloy Manufacturer SKU: TUN6785840 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Grade/coating: T9235, CVD-coated carbide Facts Size: 16 mm Thickness: 4.76 mm Corner radius: 1.2 mm Wedge angle: 60° Relief angle: 0° Special features Triangular plate form Double-sided chipbreaker With cylindrical hole for clamping ISO-format insert for turning Suitable for unstable conditions and interrupted cuts FAQ What materials is this insert suitable for? The TNMG160412 T9235 insert is optimised for machining steel; the tough T9235 grade and CVD-coated carbide substrate give improved resistance in interrupted cuts and less rigid set-ups. How is compatibility with holders determined? Compatibility depends on insert form, relief angle, tolerance class, clamping method, size and thickness; the ISO TNMG format and cylindrical hole facilitate use with standard external holders and boring bars. What is the corner radius and why does it matter? This insert has a 1.2 mm corner radius, which enhances edge strength and reduces the risk of chipping while still allowing a good surface finish in typical turning operations. Is the insert coated and how does that help? Yes, the insert uses a CVD coating on a carbide substrate; the coating improves wear resistance and edge life, especially under lower cutting speeds and interrupted machining. How many cutting edges are usable on this insert? As a triangular, double-sided insert, the TNMG160412 provides multiple usable edges, enabling efficient rotation and reuse to extend overall tool life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld Sind Sie sich nicht sicher, ob dieses Werkzeug Ihre Anforderungen erfüllt? Oder benötigen Sie ergänzende technische Daten? Kein Problem – wir stehen Ihnen gerne zur Verfügung. 📧 eMail: info@metav-werkzeuge.com ☎️ Telefon: +49 2822 7131930
TNMG 160412 T9235 Wendeplatten - Tungaloy
Combining a tough CVD‑coated carbide T9235, a triangular 60° geometry and a 1.2 mm corner radius delivers stable cutting and consistent chip control in interrupted or unstable turning conditions; order the (TNMG160412 T9235 Tungaloy insert) directly via Metav Werkzeuge or ask our consultants if needed. TNMG 160412 T9235 Turning indexable insert — Tungaloy, CVD‑coated carbide, 60° triangular A TNMG160412 T9235 Tungaloy triangular indexable insert engineered for general turning, offering robust chip control and reliable performance in unstable cuts and interrupted operations CVD‑coated carbide grade T9235 Triangular 60° form, 16 mm inscribed circle 1.2 mm corner radius for stable contours Double‑sided chipbreaker with cylindrical hole Stable cutting for interrupted and unstable turning The insert offers a CVD‑coated carbide grade (T9235) designed as a tough option for steel machining where lower cutting speeds or unstable setups are necessary. The material combination promotes stable edge life under shock and interruption, while the coating supports resistance to abrasive wear. This results in fewer unexpected edge failures and more predictable tool changes, which supports consistent production output in small to medium batch turning operations. Geometry that maintains dimensional control and surface finish The triangular 60° geometry with a 16 mm inscribed circle provides a balance between accessibility and rigidity for external and internal turning. The 1.2 mm corner radius reduces groove wear and helps maintain component contours when machining interrupted profiles. The double‑sided configuration extends usable cutting edges per insert, improving process economy without compromising repeatability or accuracy on turned workpieces. Chip control and holder compatibility for reliable set‑ups A double‑sided chipbreaker combined with a cylindrical hole secures firm clamping and consistent chip formation across varying depths of cut. The insert is ISO‑standardised, so compatibility with an appropriate external holder or boring bar depends on matching form, clearance angle, tolerance class, fixing method, size and thickness. Selecting the correct seat and clamp ensures the chipformer performs as intended and reduces the likelihood of vibration or poor chip evacuation. Practical benefits for workshop efficiency Using a tough, coated grade in combination with a stable insert geometry reduces the frequency of tool interventions and improves uptime. The ISO conformity simplifies tool procurement and replacement across different holders and brands, while the twin‑edged design reduces tooling costs per machined part. These practical benefits make the insert suitable for jobbing shops and production cells where interrupted cuts, variable setups and mixed batch sizes are common. Request a specification match or order the TNMG160412 T9235 Tungaloy insert through Metav Werkzeuge — our team can advise on holder compatibility and recommended cutting data Technical Data Article number: 6785807-Tungaloy Manufacturer SKU: TUN6785807 Manufacturer article number: 6785807 Model series: ISO‑Drehwendeschneidplatten ISO designation: TNMG160412 Facts Inscribed circle: 16 mm Corner radius: 1.2 mm Included angle: 60° Thickness: 4.76 mm Clearance angle: 0° Hole: with hole (cylindrical) Special features Material: carbide Coating / grade: T9235, CVD‑coated carbide Insert form: triangular, double‑sided Chipbreaker: double‑sided chipformer Application: turning (external and internal) Typical system: ISO insert + matching external holder or boring bar, shim/clamping set and replacement screws FAQ What materials is this insert suitable for? The TNMG160412 T9235 Tungaloy insert is intended primarily for machining steel and is formulated as a tough grade for operations with lower cutting speeds, unstable setups or interrupted cuts. How does the T9235 grade affect tool life? The T9235 CVD‑coated carbide offers enhanced resistance to flank and crater wear under shock, which tends to extend usable edge life in discontinuous turning compared with harder, more brittle grades. Which holder features must be checked for compatibility? Compatibility requires matching the insert form, clearance angle (0°), tolerance class, fixing style, inscribed circle (16 mm) and thickness (4.76 mm) with the chosen external holder or boring bar. Can the insert be used for internal boring as well as external turning? Yes — the triangular 60° form and the cylindrical hole allow secure clamping in suitable boring bars as well as external turning holders, provided the holder is designed for TNMG‑type inserts. How many usable edges does the insert provide? As a double‑sided triangular insert, multiple cutting edges are available; rotating to a fresh edge restores cutting geometry and helps maintain process continuity. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNMG 160412 T9235 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide T9235, a 60° triangular geometry and a robust 1.2 mm corner radius to maintain productive turning under interrupted or unstable cutting conditions; order the insert via Metav Werkzeuge or consult our experts for application guidance. TNMG 160412 T9235 — turning indexable insert, CVD-coated carbide (Tungaloy) TNMG160412 T9235 is an ISO triangular indexable insert for turning, engineered for steel applications and optimised for interrupted and unstable cuts. CVD-coated carbide grade T9235 Triangular ISO insert, 60° geometry 1.2 mm corner radius for robust cuts Double-sided insert with cylindrical hole Predictable performance in demanding steel turning The CVD-coated carbide composition (grade T9235) delivers a balance of toughness and wear resistance that is particularly suited to steel machining at moderate cutting speeds. The coating improves thermal stability and reduces flank wear, which helps to extend tool life under fluctuating conditions. As a result, shops can maintain consistent cycle times and reduce unscheduled tool changes, supporting a more efficient production flow without sacrificing component quality. Geometry and system compatibility that simplify processes A 60° triangular geometry with a 1.2 mm radius provides robust edge strength and adaptability for both external and internal turning. Compatibility with ISO holders is determined by form, clearance angle, tolerance class, fastening, size and thickness; the insert sits in a system that typically includes a matching external holder or boring bar, a shim/clamp set and spare screws. Clear geometry and standardised interfaces reduce setup complexity and enable quick indexing, which supports higher machine utilisation and predictable changeover times. Resilience for interrupted cuts and unstable conditions The insert's combination of a tough carbide substrate and a protective CVD coating is designed to withstand mechanical shock and variable chip formation. The double-sided chipbreaker improves chip control across a range of cutting parameters, lowering the incidence of built-up edge and enhancing surface finish consistency. This construction is particularly beneficial when processing parts with interruptions, shoulders or variable rigidity, where tool fracture risk is elevated. Practical selection guidance for workshop use When selecting an insert grade and chipbreaker, match the T9235 toughness to lower cutting speeds and applications with instability or interrupted cutting; select a firmer grade if the process allows higher speeds. The triangular, indexable insert design offers two usable cutting edges per side and easy re-indexing; ensure holder compatibility by checking form, thickness (4.76 mm) and fastening method. Where surface finish or dimensional tolerance is critical, combine the insert with a stabilised clamping system and suitable machining parameters to exploit the insert’s wear characteristics. For practical advice on integrating Tungaloy’s T9235 inserts into production and for stock or application support, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants provide application-focused guidance and immediate availability checks. Technical data Article number: 6785841 Manufacturer SKU: TUN6785841 Model series: ISO indexable inserts Product label: TNMG160412 T9235 Tungaloy-insert SKU: 6785841-Tungaloy Core data ISO designation: 160412 Insert size: 16 mm Plate thickness: 4.76 mm Corner radius: 1.2 mm Clearance angle: 0° Insert angle: 60° Special features Material: carbide (cemented carbide) Coating: CVD-coated (grade T9235) Shape: triangular, double-sided Hole: with cylindrical hole Chipbreaker: double-sided chipbreaker Application: turning; suitable for steel and interrupted cuts System composition: ISO insert + matching holder/boring bar + shim/clamp set + spare screws Suitability note: grade suited to lower cutting speeds and unstable conditions FAQ What materials is this insert best suited for? The TNMG160412 T9235 insert is formulated for machining steel; the CVD-coated T9235 grade provides toughness for interrupted cuts and less stable machining conditions. How does the T9235 coating affect performance? The CVD coating on the insert helps to reduce flank wear and improves thermal stability, which increases reliable cutting life in steel turning applications. Is the insert reversible and how many cutting edges are available? The triangular TNMG insert is double-sided and indexable, offering multiple usable edges per insert to reduce tooling costs and downtime. Which parts are needed to assemble a complete turning system? A complete system includes the ISO insert, a compatible external holder or boring bar, a shim/clamp set and replacement screws; correct matching is determined by form, clearance angle, tolerance class, fastening, size and thickness. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160412 T9235 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide toughness, a 60° triangle geometry and a 1.2 mm corner radius to improve stability in interrupted turning and extend tool life; order genuine inserts via Metav Werkzeuge or consult our advisers for application support. TNMG160412 T9235 — Indexable turning insert for turning (Tungaloy) A TNMG160412 T9235 indexable insert designed for external and internal turning on steel, offering a CVD-coated carbide grade for interrupted and unstable cutting conditions. CVD-coated carbide grade T9235 Suitable for steel and unstable cuts Triangle insert with 60° cutting geometry Double-sided design with cylindrical hole Improved process reliability and longer tool life for interrupted turning The insert provides a tough CVD-coated carbide formulation that reduces flank and crater wear in low cutting-speed, unstable conditions. With a 1.2 mm corner radius, the geometry strengthens the cutting edge, which translates into fewer unexpected indexings and extended tool life — a direct advantage for workshops handling interrupted cuts or variable stock. The combination of a robust grade and dedicated chipbreaker ensures consistent machining performance and reduced tooling costs per component. Fast integration into ISO tool systems for operational efficiency Designed as part of the ISO turning insert family, the component is compatible with matching external holders or boring bars according to form, relief angle, tolerance class, clamping and size. The triangular 60° design and double-sided construction provide multiple usable edges, lowering per-edge cost and simplifying inventory. The insert thickness of 4.76 mm and the cylindrical hole facilitate secure clamping, enabling repeatable seating and stable cutting — key factors for predictable cycle times and easier process planning. Better surface quality and economical performance in steel machining The double-sided chipbreaker geometry promotes controlled chip formation and evacuation, improving surface finish on external and internal turning operations while limiting built-up edge in difficult cuts. The T9235 grade is formulated for steel and excels in conditions with intermittent engagement, offering a balance of toughness and wear resistance. Fewer tool changes and reliable edge behaviour translate into measurable productivity gains and a more economical machining process over multiple workpieces. For expert application advice or to source genuine Tungaloy turning inserts, contact Metav Werkzeuge — Metav Werkzeuge can advise on holder compatibility and supply original parts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6785999 Manufacturer SKU: TUN6785999 Dealer SKU: 6785999-Tungaloy Model series: ISO turning inserts Core specifications ISO designation: TNMG160412 Grade / coating: T9235, CVD-coated carbide Corner radius: 1.2 mm Insert size: 16 Thickness: 4.76 mm Cutting angle: 60° Relief angle: 0° Features & materials Shape: triangular Hole: with hole, cylindrical hole Chipbreaker: double-sided Material: carbide Typical application: external and internal turning on steel System components: matching holder or boring bar, seat/ clamp set and replacement screws FAQ What materials is this insert intended for? The Tungaloy TNMG160412 T9235 insert is intended primarily for machining steel, where its tough CVD-coated carbide grade performs well under interrupted or unstable cutting conditions. How many cutting edges are available per insert? With a triangular, double-sided design, the insert provides six usable cutting edges (three corners × two sides), which improves cost efficiency per edge. What does the T9235 grade indicate? T9235 denotes a CVD-coated carbide grade optimised for toughness and wear resistance in steel turning, reducing edge chipping during interrupted cuts. How is the insert secured in the holder? Compatibility and secure clamping are ensured by matching the insert form, relief angle, tolerance class, clamping method, size and thickness; the insert is used with a suitable external holder or boring bar and a clamp/screw system. When is a 1.2 mm corner radius recommended? A 1.2 mm corner radius strengthens the cutting edge and is recommended for roughing and interrupted cuts where edge stability and resistance to chipping are priorities. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160412 TH10 Wendeplatten - Tungaloy
Reliable ISO compatibility combined with a sharp, uncoated TH10 grade results in low cutting forces and consistently clean finishes; the double‑sided chipbreaker extends service life and allows economical edge rotation. Order the inserts directly via Metav Werkzeuge or consult our specialists for application‑specific selection. TNMG160412 TH10 — ISO turning insert (Tungaloy) A TNMG160412 TH10 indexable insert for ISO‑standard turning, engineered for low cutting forces in non‑ferrous and similar applications. ISO‑standard triangular insert Sharp uncoated TH10 grade Double‑sided chipbreaker 1.2 mm corner radius Cylindrical hole for secure clamping Predictable set‑ups for machining repeatability The ISO standardisation of the insert ensures straightforward compatibility with holders and boring bars: ISO format, plate thickness and the cylindrical hole match common clamping systems. This predictability reduces set‑up time and helps maintain consistent cutting conditions across batches. The triangular geometry with corner radius 1.2 mm supports stable outer and inner turning operations while facilitating quick edge indexing when wear occurs. Lower cutting forces and improved surface quality The TH10 uncoated carbide grade is designed as a sharp, universal option for non‑ferrous materials where reduced cutting force and a clean surface are priorities. An uncoated grade minimises built‑up edge in soft alloys and yields better surface finishes in many turning tasks. As a result, cycle times can be kept efficient and secondary finishing operations are often reduced, which supports a better cost‑to‑performance ratio in production environments. Operational resilience and versatile application range The insert is manufactured from cemented carbide, offering a robust cutting edge for standard turning duties. The double‑sided chipbreaker provides two usable edges per side and helps control chip formation in unstable or interrupted cuts. Combined with the 0° clearance angle, the geometry is suitable for general external and internal turning where sharp geometry and reliable clamping are required. The design supports a wide range of workpiece materials when the TH10 grade is matched to the component and machining conditions. For consistent, repeatable turning with Tungaloy inserts, contact Metav Werkzeuge for order placement and technical guidance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Manufacturer SKU: TUN6808514 Manufacturer article number: 6808514 SKU: 6808514-Tungaloy Model series: ISO-Drehwendeschneidplatten Application: Drehen Facts Angle: 60° Clearance angle: 0° Corner radius: 1.2 mm Thickness: 4.76 mm Plate size: 16 mm Special features Material: cemented carbide Grade: TH10 (uncoated) Chipbreaker: double‑sided Plate form: triangular Hole: with cylindrical hole ISO designation: TNMG160412 FAQ What workpiece materials suit this insert best? The TNMG160412 TH10 insert by Tungaloy is intended primarily for non‑ferrous materials and applications where a sharp, uncoated carbide promotes low cutting forces and a clean finish. How many cutting edges are available per insert? With its double‑sided chipbreaker and triangular form, the TNMG160412 TH10 provides multiple usable cutting edges that can be rotated to extend service life. Is the insert compatible with standard ISO holders? Yes, the TNMG160412 follows ISO geometry and the cylindrical hole plus standard thickness enable compatibility with common ISO turning holders and boring bars. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160416 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated AH6225 carbide grade, a 1.6 mm corner radius and ISO‑compatible TNMG geometry for reliable turning performance and consistent tool life; order the insert directly via Metav Werkzeuge or contact our consultants for application advice. TNMG 160416 AH6225 Tungaloy turning insert — PVD-coated carbide, 1.6 mm radius TNMG 160416 AH6225 is a triangular ISO turning insert designed for general turning of rostfreier Stahl and other demanding applications TNMG form, ISO‑standard insert PVD-coated carbide AH6225 Suitable for rostfreier Stahl machining Double-sided chipbreaker with cylindrical hole Consistent cutting performance for varied turning tasks The PVD-coated carbide grade AH6225 provides a balanced combination of a sharp, resilient cutting edge and broad material compatibility. Designed for medium turning operations, this insert delivers stable cutting behaviour even under changing conditions, which reduces the need for frequent index changes and supports a steady production flow. The insert form meets ISO standards, so interchangeability with matching holders is straightforward and predictable. Fast set-up and predictable geometry reduce downtime The triangular TNMG geometry with a 60° included angle and a 1.6 mm corner radius offers a robust profile that simplifies tool selection and set-up. The insert’s cylindrical hole and standard thickness of 4.76 mm ensure secure clamping and consistent position repeatability in compatible holders. Because compatibility is determined by form, rake/clearance, tolerance class, fastening, size and thickness, the standardised geometry helps to minimise adjustment time and maintain machining accuracy. Improved chip control and surface quality Equipped with a double-sided chipbreaker, the insert supports effective chip control, which aids thermal stability and surface finish during both external and internal turning. The chipbreaker design is tuned to the AH6225 grade so that chips are guided away from the cutting zone, reducing the risk of re-cutting and helping to preserve the cutting edge. The result is a measurable benefit in process reliability and a cleaner, more consistent workpiece finish. Practical guidelines for selection and application This insert is suitable for a wide range of turning tasks; select the specific chipbreaker variant and holder rigidity according to workpiece stability and machining strategy. The 0° rake angle provides a neutral cutting geometry that performs reliably across different conditions, while the ISO‑standard TNMG form allows use with commonly available external holders or boring bars. For operations where material mix or process stability varies, opt for the AH6225 grade to balance edge sharpness and wear resistance. For an exact match to the machining task and the correct holder selection, contact Metav Werkzeuge — Metav Werkzeuge can advise on the TNMG 160416 AH6225 Tungaloy insert and provide ordering details via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6951035 Manufacturer SKU: TUN6951035 SKU: 6951035-Tungaloy Model series: ISO turning inserts Data Corner radius: 1.6 mm Insert size: 16 mm Thickness: 4.76 mm Included angle: 60° Rake/clearance angle: 0° Special features Material: carbide (PVD-coated, AH6225) Double-sided chipbreaker Triangular insert with cylindrical hole ISO‑standard TNMG form Suitable for rostfreier Stahl FAQ What operations is this insert designed for? The TNMG 160416 AH6225 Tungaloy turning insert is intended for external and internal turning, covering general machining tasks where a balance of sharpness and edge stability is required. Which materials are best suited to this grade? The AH6225 grade is a universal PVD-coated carbide recommended for machining rostfreier Stahl and similar materials under medium cutting conditions. How does the double-sided chipbreaker benefit machining? A double-sided chipbreaker on the TNMG geometry promotes reliable chip control and thermal stability, contributing to improved surface finish and longer edge life. Is the insert compatible with standard holders? Yes, the insert follows ISO TNMG form standards; compatibility depends on holder form, clearance, tolerance class, fastening and thickness. Metav Werkzeuge can confirm holder fitment. What information is needed to order the correct insert? When ordering, reference the TNMG 160416 AH6225 designation and the manufacturer SKU 6951035-Tungaloy to ensure the correct grade, geometry and hole style are supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160416 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide grade tuned for stainless steels, a 1.6 mm corner radius that balances edge strength and profile control, and the ISO-standard triangular form for straightforward holder compatibility; order directly via Metav Werkzeuge or consult their specialists for application advice. TNMG160416 AH6225 – ISO turning insert, PVD-coated carbide, 1.6 mm corner radius, Tungaloy The TNMG160416 AH6225 is an ISO-indexable triangular turning insert engineered for external and internal turning of stainless steels, offering a balance of a sharp cutting edge and stable performance in mixed machining conditions. PVD-coated carbide grade AH6225 Designed for stainless steels turning ISO-standard triangular form with 60° angle Double-sided chipbreaker and central hole Reliable cutting performance for stainless steels The insert's PVD-coated hardmetal delivers a sharp and stable cutting edge, optimised for medium cutting conditions and variable workpiece materials. The AH6225 grade is formulated to improve wear resistance and heat management when machining stainless steels, reducing built-up edge and promoting consistent surface finish. This results in fewer interruptions, predictable tool changes and improved process efficiency in serial production. Predictable fit and geometry for quick integration Built to the ISO series of indexable turning inserts, the triangular form with a 60° included angle and corner radius 1.6 mm ensures compatibility with a wide range of external holders and boring bars when the matching seat geometry, clearance angle and clamp arrangement are observed. The insert's 0° clearance angle and 4.76 mm thickness contribute to stable contact in the pocket, while the central cylindrical hole provides secure fastening and repeatable positioning for reliable machining cycles. Reduced changeover and controlled chip formation Featuring a double-sided chipbreaker and a robust PVD hardmetal substrate, the design supports controlled chip flow during both light and moderate cuts, reducing tool downtime and improving component quality. The indexable design allows multiple indexed edges per insert, lowering per-edge cost and shortening reconditioning intervals. For best results, select the chipbreaker and cutting parameters matched to the workpiece hardness and the intended finishing or semi-finishing operation. Enquire about the Tungaloy AH6225 grade and application options through Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and rapid availability Technical data Article number: 6947394 Manufacturer SKU: TUN6947394 SKU: 6947394-Tungaloy Type: TNMG160416 Material: Carbide Coating/grade: PVD, AH6225 Dimensions & geometry Radius: 1.6 mm Size: 16 mm Thickness: 4.76 mm Included angle: 60° Clearance angle: 0° Hole: cylindrical Special features ISO-indexable triangular insert series Double-sided chipbreaker Suitable for external and internal turning Compatible with standard holders, shims and clamps Designed for stainless steels FAQ What materials is this insert intended for? The TNMG160416 AH6225 insert is designed primarily for machining stainless steels, with the AH6225 grade offering a balance of edge sharpness and wear resistance for variable conditions. How does the 1.6 mm corner radius affect machining? A 1.6 mm corner radius on the TNMG160416 provides improved edge strength and a better surface finish in semi-finishing operations while maintaining adequate profile control for many external and internal turning tasks. Is the insert compatible with standard ISO holders? Yes; the TNMG160416 follows ISO indexable insert geometry and fits holders that match the triangular form, thickness and central cylindrical hole configuration. What fastening method does the insert use? The insert features a cylindrical hole intended for secure clamping with the appropriate screw, shim or clamp in common ISO-style turning toolholders. Can this insert be indexed to present a fresh cutting edge? The TNMG160416 is designed as a double-sided, indexable insert so edges can be rotated or flipped according to the insert and holder combination to extend service life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160416 AH6225 Wendeplatten - Tungaloy
Take advantage of robust cutting performance and consistent edge life through a combination of the PVD‑coated AH6225 grade and a 1.6 mm nose radius, ensuring efficient medium turning operations and stable chip formation; order directly via Metav Werkzeuge or consult our application specialists for any machining questions. TNMG160416 AH6225 Tungaloy turning indexable insert — triangular ISO insert for turning TNMG160416 AH6225 is an ISO‑standard triangular indexable insert designed for turning applications, optimised for medium machining of stainless steels with a sharp yet stable cutting edge. ISO-standard triangular insert TNMG160416 PVD-coated carbide grade AH6225 for stainless steel Sharp yet stable cutting edge for medium cuts Double-sided, cylindrical hole, 4.76 mm plate thickness Consistent performance for turning stainless steels The PVD‑coated AH6225 grade combines a hard substrate with a wear-resistant coating to deliver reliable edge stability in variable conditions. This composition is particularly suited to machining stainless steels, where surface quality and predictable tool life are decisive for production flow. The combination of a controlled coating and a carbide body reduces flank wear and helps maintain cutting geometry, which translates into fewer interruptions and more uniform part quality during medium cutting operations. Geometry and what it means for machining The triangular insert features a 1.6 mm nose radius and a 60° included angle, offering a balanced compromise between strength and profile control. A 1.6 mm radius provides improved tool strength over smaller radii while still allowing satisfactory surface finish on turned profiles. The specified 0° rake angle supports stable cutting in interrupted cuts and variable feeds, making the insert a dependable choice where mixed conditions occur. These geometric details allow process planners to predict cutting forces and select suitable holders and feeds for consistent cycle times. System compatibility and secure clamping As an ISO‑standard insert, compatibility with holders is determined by form, clearance angle, tolerance class, fastening method, size and thickness. The design includes a cylindrical central hole for positive locating and a double‑sided configuration that provides multiple indexable cutting edges, improving economy per insert. For a complete system, pair the insert with a matching external holder or boring bar, and use an appropriate clamping plate and replacement screws to ensure repeatable seat stability and vibration resistance during operation. Practical handling and machining advice The insert's 4.76 mm plate thickness and triangular shape provide a robust platform for medium turning. Being double‑sided extends usable life and reduces tooling costs per edge. When setting up, consider moderate cutting speeds and feeds aligned with the AH6225 recommendations for stainless steels, and use rigid workholding to benefit from the insert's stable chip formation. Where surface finish is critical, minor adjustments to feed and coolant strategy can enhance results without compromising the insert's service life. For workshop environments requiring dependable performance from Tungaloy's AH6225 grade, contact Metav Werkzeuge for tailored application advice and immediate availability via info@metav-werkzeuge.com or +49 2822 7131930. Technical Data Article number: 6966234 Manufacturer article no.: 6966234 SKU: 6966234-Tungaloy Manufacturer: Tungaloy Facts Insert designation: TNMG160416 Radius (nose): 1.6 mm Included angle: 60° Rake angle: 0° Plate thickness: 4.76 mm Plate size: 16 Hole: cylindrical Double-sided Special features Material: carbide (hardmetal) Coating: PVD Grade: AH6225 Model series: ISO turning indexable inserts Application: turning (external and internal) Chipbreaker: double-sided System: insert, suitable external holder/boring bar, clamping plate, replacement screws FAQ What materials is this insert suitable for? The TNMG160416 AH6225 insert is designed primarily for machining stainless steels and performs reliably under medium cutting conditions for these materials. How many cutting edges are available per insert? Thanks to the triangular, double-sided design, the insert provides six usable cutting edges before replacement is required. How does the AH6225 grade affect machining performance? The AH6225 PVD‑coated carbide grade offers a balance of a sharp and stable cutting edge, promoting consistent chip control and extended tool life in variable conditions. Which geometric values should be considered when selecting a holder? Consider the 60° included angle, 1.6 mm nose radius and 4.76 mm thickness to ensure the holder provides correct clearance, seating and clamping for stable machining. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160416 AH8005 Wendeplatten - Tungaloy
The combination of an ISO TNMG geometry, a PVD-coated AH8005 carbide grade and a 1.6 mm corner radius delivers high wear resistance and reliable performance in stable turning operations; order the insert via Metav Werkzeuge or consult the technical team for application-specific recommendations. TNMG 160416 AH8005 TNMG Turning Insert — Tungaloy A TNMG160416 AH8005 triangular turning insert designed for external and internal turning of heat‑resistant alloys and other hard materials PVD-coated wear-resistant AH8005 grade ISO TNMG shape with 60° cutting angle 1.6 mm corner radius for profile versatility Double-sided insert with cylindrical hole Prolonged tool life through PVD-coated carbide technology The PVD‑coated carbide grade AH8005 combines a wear‑resistant surface treatment with a robust substrate to extend edge life under sustained cutting temperatures. In practice, the PVD-coated layer reduces flank and crater wear when machining heat‑resistant alloys and other hard materials, which lowers tooling costs per component and maintains dimensional accuracy over longer cycles. The result is a predictable tool change interval and fewer interruptions in a productive turning cell. Geometry tailored for versatile external and internal turning The TNMG geometry with a 60° cutting angle and an inscribed circle size of 16 mm offers a balance between edge strength and accessibility in confined bores. The 1.6 mm corner radius provides form stability for light profiling and finishing passes, while the double-sided design supplies two usable edges per index, optimising edge economy. The insert’s 0° clearance angle and 4.76 mm plate thickness contribute to a stable cutting edge when used with appropriate rigid clamping and holders. Process stability and chip control in demanding materials Selecting the AH8005 grade together with a matching chipbreaker supports consistent chip formation and reduces built‑up edge in steady cutting conditions. The insert’s specification favours stable setups — a rigid external holder or a suitably supported boring bar is recommended to exploit the grade’s wear resistance. Fewer disturbances from uncontrolled chips and consistent edge behaviour translate into improved surface finish and repeatable cycle times for series production. Compatibility and selection guidance for reliable integration Compatibility with cutter holders is determined by insert form, clearance angle, tolerance class, fastening method, size and thickness. The system typically consists of the ISO insert paired with a corresponding external holder or boring bar, plus the required shim/clamping set and replacement screws. When choosing an insert, consider the workpiece material and whether the operation prioritises edge life or surface integrity; match the chipbreaker and grade to the machining strategy for best results. For application advice or to obtain the TNMG160416 AH8005 insert for stable turning processes, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930. Technical Data Article number: 6794914 Manufacturer SKU: TUN6794914 Brand SKU: 6794914-Tungaloy Manufacturer: Tungaloy Facts Inscribed circle / size: 16 mm Corner radius: 1.6 mm Plate thickness: 4.76 mm Cutting angle: 60° Clearance angle: 0° Special features Grade: AH8005 Coating: PVD‑coated Material: Carbide Plate form: triangular Hole: with cylindrical hole Chipbreaker: double-sided Conforms to: ISO turning insert series Typical application: external and internal turning System components: compatible holder or boring bar, shim/clamp set, spare screws FAQ What materials is this insert suited for? The TNMG160416 AH8005 insert is specified for heat‑resistant alloys and other hard materials, reflecting the wear‑resistant properties of the AH8005 grade. Which geometry and size does the insert have? This is an ISO TNMG triangular insert with a 16 mm inscribed circle, a 1.6 mm corner radius and a 60° cutting angle. Is the insert reversible and how many cutting edges are available? The insert is double‑sided, offering two indexed edges per insert and improving edge economy in repetitive turning tasks. What coating and substrate are used for this insert? The cutting insert uses a PVD‑coated surface on a carbide substrate, optimised for wear resistance in elevated cutting temperatures. How should compatibility with a holder be checked? Compatibility depends on insert form, clearance angle, tolerance class, fastening method, size and thickness; the system requires a matching holder or boring bar plus shim/clamp set and replacement screws. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160416 AH8015 Wendeplatten - Tungaloy
Balanced PVD-coated carbide and ISO TNMG geometry provide durable cutting performance; combined with a 1.6 mm corner radius and a double-sided chipbreaker, this insert delivers stable results for turning heat-resistant alloys. Order the TNMG160416 AH8015 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. TNMG 160416 AH8015 Tungaloy turning insert — ISO triangular, 60° The TNMG160416 AH8015 is an ISO-standard triangular indexable insert engineered for general turning of heat-resistant alloys, offering a robust compromise between wear resistance and edge stability. PVD-coated carbide grade AH8015 ISO TNMG 60° triangular geometry 1.6 mm corner radius for robust edges Double-sided chipbreaker for efficiency Cylindrical hole, 4.76 mm plate thickness Durable grade and coating for heat-resistant alloys The AH8015 grade, realised on a carbide substrate and finished with a PVD-coated layer, is designed as a first-choice solution for machining heat-resistant alloys. This combination balances wear resistance and edge strength to prolong tool life under thermal stress. For production environments where consistent tool behaviour reduces downtime, the coated substrate offers predictable wear characteristics and improved component quality without frequent edge changes. Geometry and fit for reliable clamping and positioning The triangular ISO TNMG form with a 60° included angle ensures broad compatibility with standard ISO external and internal turning holders. The insert’s 1.6 mm corner radius provides a compromise between edge robustness and achievable surface finish. A 0° clearance angle and a cylindrical hole support secure clamping via matching seats, while the plate thickness of 4.76 mm contributes to stiffness in interrupted cuts. These measurable parameters simplify holder selection and reduce setup uncertainty. Productivity gains through chip control and double-sided use Equipped with a double-sided chipbreaker, the insert promotes stable chip formation across a range of cutting depths and feed rates, improving process reliability and reducing rework. Two usable cutting edges per insert cut cost per edge and allow quick index changes to restore cutting geometry. In repetitive turning applications, this design helps maintain cycle consistency and supports higher average material removal rates with lower tool-change frequency. System approach and practical application guidance The insert is intended for a conventional system comprising the indexable insert, a matching external holder or boring bar, a support/ clamping set and replacement screws. Typical operations include external and internal turning; choose the chipbreaker and grade according to workpiece material, machining method and machine stability. When machining alloys with elevated temperature sensitivity, the AH8015 grade is optimised to combine stable edge life with acceptable surface quality, making it suitable for diverse workshop and production settings. For application advice or availability of the Tungaloy TNMG160416 AH8015 insert, contact Metav Werkzeuge for tailored recommendations and local supply via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: 6966238 Manufacturer SKU: TUN6966238 SKU: 6966238-Tungaloy Model series: ISO turning indexable inserts Material: Carbide (PVD-coated) Grade: AH8015 Manufacturer: Tungaloy Facts Included angle: 60° Corner radius: 1.6 mm Plate thickness: 4.76 mm Plate size: 16 mm Clearance angle: 0° Plate form: Triangular Hole: With hole (cylindrical) Chipbreaker: Double-sided Special features First choice for heat-resistant alloys Balanced wear resistance and edge stability Compatible with ISO holders by form and dimensions System components: insert, holder/boring bar, clamping set, screws Typical application: external and internal turning FAQ What materials is this insert best suited for? The TNMG160416 AH8015 insert is specified for machining heat-resistant alloys; its PVD-coated carbide composition provides a balance of wear resistance and edge stability for such materials. How many cutting edges are available per insert? Each triangular TNMG insert offers multiple usable edges; with a double-sided configuration the insert allows for edge indexing to restore cutting geometry and extend service life. Which geometry should be matched for the holder? Select an ISO-compatible holder that matches the TNMG form, the 60° included angle, plate thickness of 4.76 mm and the position of the cylindrical hole to ensure correct clamping and axial support. Is the chipbreaker suitable for heavy cuts? The double-sided chipbreaker is designed to provide stable chip formation across a range of feeds and depths; it enhances process reliability in both finishing and moderate roughing operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160416 AH8015 Wendeplatten - Tungaloy
Combining a PVD‑coated AH8015 grade with a 60° triangular geometry and a 1.6 mm corner radius, this insert provides a balanced combination of wear resistance and edge stability for turning heat‑resistant alloys; order directly via Metav Werkzeuge or consult our specialists for process matching. TNMG 160416 AH8015 triangular turning insert for Turning — Tungaloy The TNMG 160416 AH8015 is an ISO triangular indexable insert designed for external and internal turning, optimised for heat‑resistant alloys and general machining tasks. PVD-coated carbide grade AH8015 ISO TNMG 160416 triangular geometry 1.6 mm corner radius for robust finishes Double-sided insert with cylindrical hole Consistent performance on heat‑resistant alloys The PVD‑coated AH8015 grade combines wear resistance with reliable edge stability, making the insert a sound choice when processing heat‑resistant alloys where tool life and surface quality matter. The coating reduces adhesion and thermal wear on the cutting edge, which translates into fewer interruptions for tool changes and steadier output for production batches. For shops aiming to maintain cycle times while reducing scrap, this grade offers a practical balance between longevity and predictable cutting behaviour. Geometry that supports stable cutting and repeatability The 60° triangular configuration and 1.6 mm corner radius provide mechanical strength at the cutting edge and help dampen vibration in less rigid setups. The insert’s ISO geometry ensures compatibility with standard TNMG holders, while the 0° relief angle and the cylindrical hole guarantee repeatable clamping and secure seating. These characteristics reduce set‑up variance and improve dimensional consistency part‑to‑part, supporting tighter process control and lower rework rates. Efficient handling and cost control in the toolroom Being double‑sided and indexed, the insert doubles the number of usable cutting edges per part compared with single‑edged designs, lowering tooling spend per machined metre. The system‑oriented approach—insert, matching holder, shim and clamp—simplifies replenishment and inventory planning. The presence of a double‑sided chipbreaker suited to the grade and material class means optimised chip control with fewer interruptions, contributing to higher machine uptime and more predictable production planning. Practical fit for production and jobbing environments Engineered for turning, the insert suits both batch production and flexible jobbing shops that machine alloyed steels and heat‑resistant materials. The combination of a robust grade and a stable form supports longer uninterrupted runs and consistent surface finish, which is especially valuable for customers requiring repeatable, certifiable results. For applications requiring different chip control or surface demands, selecting the appropriate chipbreaker and matching insert grade will ensure the best balance between productivity and finish quality. Discuss Tungaloy TNMG 160416 AH8015 with Metav Werkzeuge for tailored turning strategies and compatibility advice — contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6947395 Manufacturer SKU: TUN6947395 SKU: 6947395-Tungaloy Model series: ISO turning indexable inserts Shape: triangular Facts ISO designation: 160416 Corner radius: 1.6 mm Relief angle: 0° Plate thickness: 4.76 mm Plate size: 16 mm Included hole: cylindrical hole Insert angle: 60° Special features Grade/coating: AH8015, PVD‑coated carbide Chipbreaker: double-sided Suitable application: Turning Material: Carbide FAQ What materials is this insert best suited for? The TNMG 160416 AH8015 insert is specified for turning heat‑resistant alloys; the PVD‑coated AH8015 grade provides the wear resistance and edge stability needed for such materials. Is the insert compatible with standard TNMG holders? Yes; the insert follows the ISO TNMG 160416 form so compatibility depends on holder form, clearance angle, tolerance class, fastening and thickness. How does the double‑sided design affect cost of use? Double‑sided indexing doubles the number of usable edges per insert, improving cost efficiency and reducing tooling change frequency in production. What chip control can be expected with this grade? Equipped with a double‑sided chipbreaker, the insert offers controlled chip formation for general turning tasks; chipbreaker selection should match the workpiece material and machining stability. Can the insert be used for both internal and external turning? Yes; the triangular geometry and ISO form make the insert suitable for both external and internal turning when used with the appropriate holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160416 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD‑coated carbide grade engineered for heat‑resistant alloys and a 60° triangular geometry that delivers consistent edge stability and process reliability; the central cylindrical hole ensures secure clamping and repeatable seating. Order the insert directly via Metav Werkzeuge or ask the consultants for application support. TNMG 160416 AH8015 ISO turning insert — Tungaloy TNMG160416 AH8015 is an ISO‑standard turning indexable insert designed for general turning of heat‑resistant alloys, offering a balance of wear resistance and cutting‑edge stability. Triangular ISO insert, 60° included angle PVD‑coated carbide grade AH8015 Suited for heat‑resistant alloys and general turning Central cylindrical hole for secure mounting Reliable performance on heat‑resistant alloys The PVD‑coated carbide grade AH8015 has been developed as a first choice for general machining of heat‑resistant alloys, where a compromise between wear resistance and cutting‑edge stability is crucial. The coating improves surface hardness and reduces built‑up edge, which leads to more consistent component quality and longer indexable‑insert life. This results in fewer tool changes and steadier cycle times during production runs. Designed for secure clamping and accurate fit As an ISO‑compliant turning insert, the triangular geometry with a 60° included angle and a central cylindrical hole ensures precise seating in compatible holders. Compatibility with a clamping system is determined by form, clearance, tolerance class, attachment method, size and thickness; the insert’s 4.76 mm thickness and 16 mm size support robust rigidity. The 1.6 mm corner radius provides a controlled edge for medium‑to‑heavy cuts while helping to avoid premature chipping when the machining setup is stable. Efficient chip control and economical use of edges The insert is double‑sided, offering cost‑effective use of cutting edges and straightforward indexability. A matched chipbreaker and the grade’s balancing of toughness and hardness enhance chip control, reducing the risk of entanglement and easing swarf handling in turning operations. The economic benefit is twofold: reduced tooling expenditure per part and improved uptime thanks to fewer indexing events. Practical system setup and recommended applications The recommended system consists of the ISO indexable insert, a matching external holder or boring bar, an underlay/clamp set and replacement screws. Typical applications include both external and internal turning; select the chipbreaker and the AH8015 grade according to workpiece material and machine‑tool stability. For unstable setups, favour a more robust holder and conservative cutting parameters to capitalise on the insert’s edge stability. Contact Metav Werkzeuge today for tailored recommendations on the Tungaloy TNMG160416 AH8015 insert and to discuss holder compatibility or batch supply; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6951036 SKU: 6951036-Tungaloy Manufacturer SKU: TUN6951036 Manufacturer: Tungaloy Facts ISO designation: TNMG160416 Size: 16 mm Thickness: 4.76 mm Corner radius: 1.6 mm Included angle: 60° Clearance angle: 0° Shape: triangular Hole: with cylindrical hole Coating / grade: PVD, AH8015 Material: carbide Side: double‑sided Special features First choice for machining heat‑resistant alloys Balanced wear resistance and edge stability Compatible with ISO‑compliant holders and boring bars System set-up: insert, holder, underlay/clamp set, replacement screws Applications: external and internal turning FAQ What materials is this insert best suited for? The TNMG160416 AH8015 insert is optimised for heat‑resistant alloys, where the AH8015 grade offers a balanced compromise between wear resistance and cutting‑edge strength for reliable turning performance. Is the TNMG160416 insert double‑sided? Yes, the indexable insert is double‑sided, enabling economical use of multiple cutting edges before replacement or regrinding is necessary. What are the key dimensional features to check for holder compatibility? Compatibility is determined by form, clearance angle, tolerance class, attachment, size (16 mm) and thickness (4.76 mm); the central cylindrical hole must match the clamping arrangement of the chosen holder. Can this insert be used for internal turning as well as external turning? The grade and geometry are suitable for both external and internal turning, provided the holder and machine setup offer adequate rigidity for the intended cuts. What coating and substrate does the TNMG160416 AH8015 use? The insert combines a PVD coating with a carbide substrate in the AH8015 grade to enhance wear resistance and edge stability in demanding alloy machining. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNMG 160416 T5125 Wendeplatten - Tungaloy
Take advantage of a robust combination of CVD-coated carbide in the T5125 grade and a double-sided chipbreaker to stabilise interrupted turning operations and extend tool life; order the insert directly via Metav Werkzeuge or consult their specialists for holder compatibility. TNMG160416 T5125 triangular indexable insert for turning — Tungaloy CVD-coated carbide, 60° The TNMG160416 T5125 is an ISO triangular indexable insert engineered for external and internal turning, particularly where interrupted cuts or less stable clamping demand a tougher grade. CVD-coated carbide grade T5125 Designed for cast iron machining Double-sided chipbreaker for chip control 60° triangular geometry for versatile turning Reduced downtime and stable cutting in interrupted turning The TNMG160416 insert combines a CVD-coated surface with a tougher carbide substrate to resist wear under interrupted cutting, which results in fewer indexings and longer productive runs. This configuration is especially effective for the machining of cast iron, where fluctuation in cutting forces can lead to premature edge damage; by selecting the T5125 grade and the appropriate chipbreaker, the insert provides improved chip control and consistent cutting performance. The net effect is lower tooling change frequency and a steadier production flow. Predictable edge life and controlled chip evacuation A double-sided chipbreaker, applied to a triangular geometry, gives multiple usable cutting edges and predictable behaviour in varied conditions, which supports process reliability and cost-efficiency. The ISO format ensures that indexing and regrinding cycles are straightforward, while the CVD-coated surface reduces abrasive wear and helps maintain a stable cutting edge. These attributes make the insert suitable where repeatable surface quality and tool life are priorities, without complex parameter adjustments. Simple integration: dimensions and mounting that matter Compatibility with toolholders depends on form, relief, tolerance class, fastening, size and thickness; the key dimensions for this insert are a 1.6 mm corner radius, 4.76 mm plate thickness and a 16 mm inscribed circle, mounted via a cylindrical hole in a 60° triangular layout. These measurable features facilitate straightforward selection of a matching external holder or boring bar and reduce set-up uncertainty. The triangular shape, combined with the double-sided design, optimises the number of indexed edges per insert and contributes to economical machining cycles. For tailored advice on selecting the right Tungaloy inserts for specific turning tasks, and to confirm holder compatibility for cast iron applications, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for expert guidance and ordering. Technical data Article number: 6853024 SKU: 6853024-Tungaloy Manufacturer SKU: TUN6853024 Model series: ISO-Drehwendeschneidplatten Designation: TNMG160416 Material: carbide Grade / sort: T5125 Coating: CVD-coated Facts Corner radius: 1.6 mm Plate thickness: 4.76 mm Inscribed circle / size: 16 mm Geometry angle: 60° Clearance / relief angle: 0° Hole style: cylindrical hole Special features Plate form: triangular Chipbreaker: double-sided Application: turning (external and internal) Typical use: interrupted cuts, less stable conditions Compatibility determined by form, relief, tolerance class, fastening, size and thickness FAQ Is this insert suitable for machining cast iron? Yes. The TNMG160416 T5125 insert uses a tougher T5125 carbide grade and a CVD-coated surface, making it suitable for cast iron machining, particularly in interrupted-cut scenarios. How does the chipbreaker affect performance? The double-sided chipbreaker on the TNMG160416 promotes consistent chip control and stable cutting behaviour, which aids process reliability and reduces the likelihood of edge damage. What mounting features must be checked when selecting a holder? Check form, relief (clearance) angle, tolerance class, fastening method, size (16 mm) and plate thickness (4.76 mm) to ensure the insert fits the chosen holder or boring bar. How many cutting edges are available before disposal? The triangular 60° geometry combined with a double-sided design provides multiple indexable edges per insert, extending usable service life and improving cost-efficiency. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160416 T6215 Wendeplatten - Tungaloy
A combination of a CVD-coated carbide grade and a robust 60° triangular geometry delivers consistent cutting performance for stainless-steel turning; the T6215 grade and a 1.6 mm corner radius ensure wear resistance and reliable edge life. Order the insert directly via Metav Werkzeuge or ask our consultants for holder compatibility and optimal setup. TNMG160416 T6215 Tungaloy indexable insert for Turning, 60° triangle TNMG160416 T6215 is an ISO-standard triangular insert designed for external and internal turning, optimised for stainless steels under stable to lightly interrupted cutting conditions. TNMG160416 geometry for 60° triangular holders CVD-coated carbide grade T6215 for stainless steels 1.6 mm corner radius for robust profile Double-sided chipbreaker with cylindrical hole Consistent wear resistance for stainless-steel turning The insert uses a CVD-coated carbide substrate combined with the wear-resistant grade T6215, giving a balanced mix of toughness and abrasion resistance. This configuration reduces flank wear during prolonged cuts and supports reproducible machining cycles. By choosing this material specification, workshops benefit from longer tool life and fewer index changes, which reduces downtime and contributes to predictable production scheduling. ISO conformity and precise fit for reliable clamping Manufactured to ISO-standard geometry, the triangular form with a 60° included angle and 0° clearance makes the component compatible with a wide range of standard turning holders. The insert features a cylindrical hole and a 4.76 mm thickness, so compatibility depends on holder shape, tolerance class and clamping method. Correct pairing with a suited holder and the appropriate shim or clamp set ensures repeatable positioning and consistent cutting performance across batches. Improved chip control and stable cutting performance The double-sided chipbreaker is tailored for stainless-steel machining and helps produce short, controllable chips under stable to slightly interrupted conditions. Combined with the corner radius 1.6 mm, the geometry supports a stronger cutting edge that tolerates modest interruptions without rapid edge breakdown. Better chip control reduces surface damage, lowers the risk of built-up edge and simplifies chip evacuation in automated or manual turning operations. Practical use cases and system setup guidance Engineered for both external and internal turning, the insert integrates into a system comprising the indexable insert, a matching external holder or boring bar, plus shim/clamp sets and replacement screws. For best results, choose a holder that matches the TNMG160416 footprint, verify clamping torque and select cutting parameters aligned with the stainless-steel grade and part rigidity. This approach ensures efficient material removal and consistent surface finish while leveraging the insert’s CVD-coated benefits. Contact Metav Werkzeuge for tailored holder recommendations and to order the Tungaloy TNMG160416 T6215 insert; email info@metav-werkzeuge.com or call +49 2822 7131930 for technical advice and fast delivery Technical Data Article number: 6966232 Manufacturer SKU: TUN6966232 SKU: 6966232-Tungaloy Material: carbide Model series: ISO turning indexable inserts Data Insert designation: 160416 Geometry: triangular, 60° Corner radius: 1.6 mm Thickness: 4.76 mm Size: 16 mm Clearance angle: 0° Special features Coating: CVD-coated Grade: T6215 (wear-resistant) Chipbreaker: double-sided Hole style: cylindrical hole Typical application: turning of stainless steels System components: insert, external holder or boring bar, shim/clamp set, replacement screws FAQ What materials is this insert best suited for? The TNMG160416 T6215 insert is specified for machining stainless steels, offering improved wear resistance and stable cutting performance under standard turning conditions. Is the insert reversible or single-use per edge? This triangular insert is double-sided; when one edge wears, indexing to the next edge restores cutting geometry and extends practical insert life. Which holders are compatible with this insert? Compatibility is determined by the insert form, thickness, hole style and tolerance class; pair the insert with a 60° triangular ISO holder that accepts a 16 mm size and a 4.76 mm thick insert. What advantage does the T6215 grade provide? The T6215 CVD-coated grade offers a balance of abrasion resistance and edge strength, making it suitable for continuous and lightly interrupted stainless-steel turning where predictable tool life is required. How does the chipbreaker affect surface finish? The double-sided chipbreaker produces short, controllable chips and helps maintain a consistent surface finish by preventing long, tangled chips and reducing built-up edge formation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160416 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide, a 60° triangular geometry and reliable indexability for steady stainless-steel turning under stable to lightly interrupted conditions. Order the insert directly via Metav Werkzeuge or consult our specialists for application advice. TNMG 160416 T6215 TNMG turning insert, Tungaloy — CVD-coated carbide for stainless-steel turning The TNMG160416 T6215 is a triangular ISO turning insert designed for external and internal turning of stainless steels in stable to mildly interrupted cutting conditions. CVD-coated carbide for long life Designed for stainless-steel turning 60° triangular insert with 1.6 mm nose Double-sided chipbreaker, cylindrical hole Optimised wear resistance for demanding stainless-steel applications The combination of a CVD-coated carbide grade and a wear-orientated geometry provides extended tool life when machining stainless steel. The applied coating and substrate pairing reduce flank wear and maintain cutting-edge integrity over longer tool cycles, which translates into fewer indexings and lower tooling costs per part. For workshop planning, the T6215 grade is aimed at steady turning operations where consistent surface finish and repeatable tool life are priorities, enabling reliable production scheduling and reduced scrap rates. Secure mounting and ISO compatibility ensure predictable results Designed as an ISO-compliant insert, the triangular shape and dimensions follow standard form factors so that compatibility with holders is determined by form, clearance angle, tolerance class, clamping method, size and thickness. The cylindrical hole facilitates a positive mechanical locate in many popular external holders and boring bars, while the specified 0° clearance angle supports neutral cutting approaches common in stainless-steel turning. Clear matching of insert and holder ensures predictable cutting forces, improved process stability and easier setup for repeat production runs. Consistent chip control and productivity through design features A double-sided chipbreaker combined with a 60° geometry and a 1.6 mm nose radius provides balanced chip formation and surface integrity when turning stainless steels. The insert’s 4.76 mm thickness and indexable, double-sided format allow two usable cutting edges per side, which reduces tooling change frequency and downtime. Stable chip control decreases the risk of built-up edge and thermal fluctuation in the cutting zone, supporting higher material removal rates without compromising surface finish or dimensional accuracy. Contact Metav Werkzeuge today for tailored machining advice on Tungaloy turning inserts and to confirm suitability for specific stainless-steel grades; Metav Werkzeuge can provide application support and detailed technical data upon request Technical data Article number: 6951034 Manufacturer SKU: TUN6951034 SKU: 6951034-Tungaloy Model series: ISO turning inserts Material: Carbide Facts Insert designation: TNMG160416 Grade/coating: T6215 (CVD-coated) Size: 16 mm Corner radius: 1.6 mm Thickness: 4.76 mm Clearance angle: 0° Insert angle: 60° Special features Triangular insert, double-sided indexable Cylindrical mounting hole Double-sided chipbreaker Suited for external and internal turning Optimised for stainless-steel machining ISO form and dimensions for broad holder compatibility FAQ What materials is this insert designed for? The TNMG160416 T6215 insert by Tungaloy is engineered primarily for stainless steel machining under stable to lightly interrupted turning conditions. How many cutting edges are available per insert? The triangular, double-sided format gives multiple indexable edges, allowing cost-effective use of the insert before replacement. Does the insert fit standard ISO holders? Yes, the insert follows ISO dimensions and locates via a cylindrical hole; compatibility is determined by shape, size, thickness and clamping style of the holder. What is the advantage of the T6215 coating? The T6215 CVD coating enhances wear resistance and reduces flank wear during stainless-steel turning, supporting longer tool life and consistent surface quality. Is the 1.6 mm nose suitable for finishing work? A 1.6 mm corner radius balances strength and surface finish; it is suitable for many finishing and light roughing passes on stainless steels. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160416 T6215 Wendeplatten - Tungaloy
Benefit from the combination of a CVD-coated carbide grade for extended tool life, a robust 60° triangular ISO geometry, and a 1.6 mm corner radius for improved edge strength — ideal for productive turning of stainless steels. Order the insert directly via Metav Werkzeuge or consult our specialists for selection guidance. TNMG160416 T6215 ISO turning indexable insert — CVD-coated carbide, 60° triangle (Tungaloy) The TNMG160416 T6215 is an ISO-standard triangular indexable insert designed for external and internal turning, optimised for stainless-steel applications under stable to lightly interrupted conditions. CVD-coated carbide for wear resistance Triangular ISO shape, 60° included angle Double-sided chipbreaker, cylindrical hole Corner radius 1.6 mm for improved edge strength Longer tool life through advanced CVD coating The insert uses a CVD-coated carbide substrate that provides high wear resistance when machining stainless steel, making it suitable for continuous production runs where tool life and consistent results are crucial. The CVD coating forms a hard, wear-resistant layer that reduces flank wear and helps maintain cutting geometry over multiple indexings. This feature reduces unplanned tool changes and supports a smoother production flow with fewer interruptions. Predictable cutting behaviour from proven geometry The 60° triangular geometry combined with a corner radius 1.6 mm increases edge robustness and distributes cutting forces to lower the risk of chipping in stable and slightly interrupted cuts. The insert’s ISO form and 4.76 mm thickness contribute to rigidity in the cutting zone, while the cylindrical hole ensures secure clamping in compatible holders. These geometric characteristics translate into predictable performance and consistent surface quality on turned components. Practical system integration and chip control Designed as part of an ISO turning-plate system, the insert integrates with a matching holder, support shim and clamping set; compatibility depends on form, relief angle, tolerance class, clamping method, size and thickness. The double-sided chipbreaker provides reliable chip control for the target material family and can be selected to suit the specific cutting mode and workpiece stability. Clear system architecture enables fast replacement and simple inventory handling in workshop environments. Recommended applications and selection notes The grade T6215 is tailored to offer a wear-resistant option for machining stainless steels under stable to lightly interrupted conditions. The insert is suited for both external and internal turning, where consistent cutting edges and good edge stability are required. When selecting the chipbreaker and grade, consider the workpiece alloy, depth of cut and machine rigidity to ensure optimal results; the combination of CVD coating and robust geometry supports cost-effective production with reliable repeatability. For reliable stainless-steel turning with Tungaloy’s wear-resistant T6215 grade, contact Metav Werkzeuge for personalised selection advice or to place an order via info@metav-werkzeuge.com or by phone at +49 2822 7131930. Technical Data Article number: 6944868 Manufacturer SKU: TUN6944868 SKU: 6944868-Tungaloy Model series: ISO turning indexable inserts Material: carbide Coating / grade: T6215 (CVD-coated) Facts Shape: triangular (60°) Size: 16 mm Corner radius: 1.6 mm Thickness: 4.76 mm Clearance angle (relief): 0° Hole style: cylindrical hole Special features Double-sided chipbreaker Compatible with ISO-standard holders and clamping sets Intended for external and internal turning Designed for stable to slightly interrupted cuts Wear-resistant grade for stainless steels FAQ What materials is this insert intended for? The TNMG160416 T6215 insert is designed primarily for machining stainless steels; the T6215 grade and CVD-coated carbide substrate improve wear resistance for this material family. Which turning operations suit this insert? The insert is suitable for both external and internal turning operations and performs best under stable to lightly interrupted cutting conditions. How is compatibility with a holder determined? Compatibility is determined by the insert form, relief angle, tolerance class, clamping method, size and thickness; the ISO-standard format ensures broad compatibility with matching holders and clamping sets. What benefit does the double-sided chipbreaker provide? A double-sided chipbreaker allows both faces to be used, offering effective chip control and economical use of the insert before indexing or replacement. What is the manufacturer SKU and article number for ordering? The product is listed as manufacturer SKU TUN6944868 and article number 6944868; the label appears as TNMG160416 T6215 Tungaloy-Wendeplatte (SKU 6944868-Tungaloy). Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160416 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated cemented carbide for high wear resistance, a 60° triangular geometry for stable cutting, and a double-sided chipbreaker for consistent chip control; order the inserts directly via Metav Werkzeuge or consult the technical team for process matching. TNMG 160416 T9215 turning insert — CVD-coated carbide, 60° triangle (Tungaloy) TNMG 160416 T9215 is an ISO-standard turning insert designed for medium steel machining, providing a balance of wear resistance and fracture toughness for productive, continuous to lightly interrupted cuts. CVD-coated cemented carbide grade T9215 Optimised for medium steel turning 60° triangular form with 1.6 mm radius Double-sided chipbreaker, cylindrical hole Higher productivity through robust coating and grade selection The combination of a CVD coating with a cemented carbide substrate in grade T9215 is tuned for the demands of medium steel machining: improved wear resistance extends tool life, while retained substrate toughness reduces the risk of edge breakage under continuous or slightly interrupted cuts. This chemistry and microstructure selection translates into fewer insert changes and more stable cycle times on turning operations. The double-sided chipbreaker contributes to repeatable chip formation, which lowers the probability of tool-related downtime and supports steady component quality. Precise geometry for predictable clamping and repeatable results An ISO-standard triangular form with a nominal 60° included angle and a 1.6 mm corner radius yields a well-defined cutting edge that is compatible with a broad range of holders. The insert’s 4.76 mm thickness and the presence of a cylindrical locating hole ensure correct seating and clamping; compatibility is governed by form, clearance angle, tolerance class, fastening method, size and thickness. These geometric constants simplify tool inventory management and reduce setup variation, delivering predictable surface finish and dimensional consistency across batches when the correct holder and clamping torque are used. Practical application guidance to match process requirements Intended primarily for external and internal turning of steels, the insert performs best under steady feeds and moderate depths of cut; selecting the correct chipbreaker and insert grade for the workpiece material and cutting conditions is essential. The double-sided chipbreaker allows economical indexable use, effectively doubling tool life per insert compared with single-sided alternatives. For novices, a chipbreaker is the engineered groove or land ahead of the cutting edge that controls chip shape and evacuation; a well-chosen chipbreaker reduces entanglement and improves surface integrity. Pairing the insert with a suitably rigid holder and optimised cutting parameters will maximise the advantages of the T9215 grade in terms of throughput and surface finish. For tailored cutting data, availability or procurement of Tungaloy TNMG 160416 T9215 inserts, contact Metav Werkzeuge for expert advice and prompt supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6951029 Manufacturer SKU: TUN6951029 SKU: 6951029-Tungaloy Name: TNMG160416 T9215 turning insert Facts Corner radius: 1.6 mm Inscribed circle / size: 16 mm Thickness: 4.76 mm Included angle: 60° Clearance angle: 0° Special features Material: cemented carbide (Hartmetall) Coating: CVD Grade: T9215 Chipbreaker: double-sided Hole: cylindrical locating hole Form: triangular Application: turning (external and internal) Compatibility: ISO turning holders, determined by form, clearance, tolerance, fastening, size and thickness FAQ What materials is this insert designed for? The TNMG 160416 T9215 insert is optimised for medium steel machining, combining a CVD coating and carbide substrate to balance wear resistance and toughness for productive turning. Is the insert reversible or single-use? This triangular TNMG insert is double-sided, allowing indexing to a fresh cutting edge and offering economical multiple-edge use before disposal. Which holder features are required for correct fitment? Correct seating requires an ISO-compatible holder that matches the insert’s triangular form, 0° clearance angle, thickness (4.76 mm) and uses the cylindrical locating hole for secure clamping. How does the chipbreaker affect machining? The double-sided chipbreaker controls chip shape and evacuation; it improves process stability, reduces the risk of chip jamming and contributes to a consistent surface finish under suitable cutting conditions. Can this insert handle interrupted cuts? The T9215 grade and geometry tolerate continuous to slightly interrupted cuts; for heavy interruption it is advisable to review cutting parameters and clamping rigidity to avoid edge chipping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160416 T9215 Wendeplatten - Tungaloy
Take advantage of high productivity and reliable wear resistance provided by the CVD-coated carbide grade and the robust 1.6 mm corner radius for consistent medium-steel turning. Order directly via Metav Werkzeuge or consult our application specialists for selection and integration advice. TNMG160416 T9215 Turning Insert (TNMG 160416) – Tungaloy TNMG160416 T9215 is an ISO indexable turning insert designed for external and internal turning of medium-grade steels, offering high wear resistance and stable chip control. CVD-coated carbide substrate 1.6 mm corner radius for robustness Double-sided chipbreaker for chip control ISO TNMG 160416 with cylindrical hole Consistent productivity for medium-steel turning The CVD-coated carbide grade offers a balanced combination of wear resistance and fracture toughness, making it an economical choice for steady production. The engineered coating reduces abrasive wear and extends edge life during continuous and lightly interrupted cuts, so cycle times remain stable. This results in fewer tool changes and predictable component quality, improving process efficiency in batch and single-piece production alike. Designed for precise mounting and straightforward system integration As an ISO-standard indexable plate, the insert is compatible with holders when form, relief angle, tolerance class, fastening method, size and thickness match. The 0° relief and 60° included angle ensure predictable seating and cutting geometry. The cylindrical hole simplifies secure clamping and repeatable positioning in the toolholder, while the standard dimensions allow quick replacement and minimal set-up time. Integration is completed by the matched holder, a support shim and a clamping screw for a complete, reliable assembly. Reduced downtime through robust geometry and reliable chip control The triangular plate form combined with a double-sided chipbreaker provides multiple indexable cutting edges and effective chip formation across typical turning feeds. A 1.6 mm corner radius strengthens the cutting edge for roughing and medium finishing passes without compromising surface quality. The substrate and geometry work together to reduce edge chipping and unplanned stoppages, supporting steady productivity and consistent component tolerances. Contact Metav Werkzeuge for tailored advice on the Tungaloy grade, compatibility checks and fast availability of the TNMG160416 T9215 insert Technical Data Article number: 6773869 Manufacturer SKU: TUN6773869 SKU: 6773869-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: carbide Data Corner radius: 1.6 mm Plate thickness: 4.76 mm Plate size: 16 mm Included angle: 60° Relief angle: 0° Hole: with cylindrical hole Special features Grade: T9215 (CVD-coated) Chipbreaker: double-sided Plate form: triangular ISO designation: TNMG160416 Application: turning Suitable for medium steel For continuous to light interrupted cuts System components: insert, holder, shim and clamping screw FAQ What materials is this insert suitable for? The TNMG160416 T9215 insert is specified for medium-grade steel machining; the T9215 CVD-coated carbide grade balances wear resistance and toughness for such applications. How is holder compatibility determined? Compatibility depends on the insert form, relief angle (0°), tolerance class, fastening method, size (16 mm) and thickness (4.76 mm); the TNMG160416 designation aligns with ISO holders designed for that geometry. What benefits does the T9215 grade provide? Tungaloy’s T9215 grade uses a CVD coating on a carbide substrate to increase wear resistance while maintaining fracture toughness, enabling higher productivity with predictable tool life. Can the insert be indexed and how is chip control achieved? The triangular plate with a double-sided chipbreaker provides multiple indexable cutting edges and consistent chip formation, reducing downtime for edge changes. What is the purpose of the cylindrical hole in the insert? The cylindrical hole enables positive location and secure clamping in the toolholder, ensuring repeatable seating and simple replacement during routine maintenance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160416 T9215 Wendeplatten - Tungaloy
Benefit from the combination of a CVD‑coated carbide T9215 grade, a 1.6 mm corner radius and a double‑sided chipbreaker to secure consistent edge life and stable chip control on medium‑duty steel turning. Order the insert directly via Metav Werkzeuge or ask our consultants for application advice. TNMG 160416 T9215 — Tungaloy TNMG160416 turning insert for ISO turning TNMG160416 T9215 Tungaloy‑Wendeplatte is an ISO‑standard triangular turning insert designed for external and internal turning in general steel machining applications ISO triangular insert TNMG160416 for turning CVD‑coated carbide grade T9215 for mid steel Double‑sided chipbreaker for consistent chips Cylindrical hole for secure, repeatable clamping Productive turning with consistent edge life The combination of a CVD‑coated carbide substrate and the T9215 grade gives a balanced mix of wear resistance and fracture toughness that is tuned for the middle range of steel machining. The coating reduces flank and crater wear under continuous and slightly interrupted cuts, which translates into longer usable cutting edge life and fewer changeovers. The geometry and material selection enable predictable tool performance in series production, helping maintain cycle times and part quality. Stable chip control that supports higher productivity A double‑sided chipbreaker ensures reliable chip formation across a range of feeds and depths of cut, keeping chips compact and manageable during both external and internal turning. The effective chip control reduces the risk of re-cutting and improves swarf evacuation, which benefits process reliability and surface finish. For applications where cycle time and unattended shifts matter, the controlled chips contribute directly to operational efficiency and safer machine operation. Secure clamping and ISO compatibility for easy integration The insert features a cylindrical hole and conforms to ISO dimensions, so compatibility with matching external holders and boring bars is determined by form, relief angle, tolerance class, fastening method, size and thickness. With a 0° relief angle and a plate thickness of 4.76 mm, the insert mounts securely and offers predictable radial support. The triangular form with a 1.6 mm corner radius provides a compromise between strength and profile detail, making it suitable for a variety of turning tasks while remaining straightforward to fit into established tool systems. Optimised for mid‑range steel applications and reliable production Chosen as a first option for medium steel, the T9215 grade is engineered for high productivity with continuous to lightly interrupted cuts, combining wear resistance with resistance to chipping. That balance reduces unscheduled tool changes and supports stable part tolerances over longer production runs. For manufacturers aiming to increase throughput without sacrificing consistency, this insert offers a practical route to more productive turning operations. Choose the Tungaloy T9215 grade for proven productivity in steel turning and contact Metav Werkzeuge for tailored cutting data or application support — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6966230 SKU: 6966230-Tungaloy Manufacturer SKU: TUN6966230 Model series: ISO‑Drehwendeschneidplatten Name: TNMG160416 T9215 Tungaloy‑Wendeplatte Facts Corner radius: 1.6 mm Plate thickness: 4.76 mm Plate size: 16 mm Included angle: 60° Relief angle: 0° Hole style: cylindrical hole Special features Material: carbide Coating: CVD Grade: T9215 Chipbreaker: double‑sided Shape: triangular Application: turning (external and internal) Compatible with ISO turning holders FAQ What applications is this insert best suited to? The TNMG160416 T9215 Tungaloy turning insert is optimised for external and internal turning of medium steels and performs well in continuous to lightly interrupted cuts. How does the T9215 grade affect tool life? T9215, a CVD‑coated carbide grade, combines wear resistance with toughness to extend usable edge life under typical steel turning conditions while maintaining reliable fracture resistance. Which holder features are required for correct fitment? Correct compatibility requires matching the insert form, relief angle, tolerance class, fastening method, size and thickness to the chosen ISO holder; the TNMG160416 form and cylindrical hole provide secure clamping when paired with the appropriate external holder or boring bar. Can this insert be indexed to use multiple edges? Yes, the triangular, double‑sided geometry allows indexing of additional cutting edges, enabling multiple edge changes per insert and improving overall tool economy. What surface finish can be expected with this geometry? With appropriate cutting data and machine stability, the geometry and 1.6 mm corner radius support good surface quality on medium steel, while the chipbreaker helps maintain consistent finishes across batch runs. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNMG 160416 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, robust fracture security and ISO compatibility for consistent, productive turning operations; order directly via Metav Werkzeuge or consult our advisors for application support. TNMG 160416 T9215 turning indexable insert by Tungaloy — CVD-coated carbide, 60° triangular geometry A TNMG160416 T9215 indexable insert designed for ISO-compatible holders, engineered for external and internal turning in medium steel and optimised for continuous to light interrupted cuts CVD-coated carbide grade T9215 60° triangular geometry, 1.6 mm radius Double-sided chipbreaker, cylindrical hole Optimised for medium steel, high productivity Prolonged tool life through CVD-coated carbide technology The CVD-coated carbide grade T9215 combines wear resistance with controlled toughness, making it a reliable choice for sustained production runs. The chemical vapour deposition layer reduces flank wear under typical turning conditions, which directly contributes to longer tool life and fewer insert changes. This material choice supports a higher metal removal rate in stable setups, providing a clear productivity advantage in medium-steel machining. Geometry engineered for consistent chip control and stability The 60° triangular shape and 1.6 mm corner radius deliver a balanced mix of strength and cutting edge definition. The double-sided chipbreaker promotes predictable chip formation and evacuation, which reduces the risk of chatter and restart issues during light interruptions. Insert compatibility depends on holder form, clearance angle, tolerance class, fixing method, size and thickness; therefore, matching the insert geometry to the clamping system ensures repeatable performance and minimal setup time. Tailored for medium-steel turning with predictable results Selected as a first choice for medium steel, the grade and geometry are tuned to perform under continuous cutting and light interruptions, offering a compromise between wear resistance and breakage safety. In practice, this means the insert maintains surface finish quality while allowing for efficient cutting parameters. For internal and external turning tasks, using the correct chipbreaker and matching the grade to workpiece stability will shorten cycle times and lower tool consumption. Ready-to-fit system components for straightforward assembly The ISO-format insert integrates into a system that includes a suitable external holder or boring bar, a supporting shim or clamp set and replacement screws. The insert’s cylindrical hole simplifies accurate seating and secure clamping; the 4.76 mm thickness and standard size facilitate interchangeability across ISO holders. Quick insert changes reduce machine downtime and simplify tool management in busy production environments. For precise application advice or to source Tungaloy inserts in grade T9215, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt, specialist assistance. Technical data Article number: 6944865 SKU: 6944865-Tungaloy Manufacturer SKU: TUN6944865 Core measurements Insert designation: TNMG160416 Geometry angle: 60° Corner radius: 1.6 mm Thickness: 4.76 mm Size: 16 mm Materials & features Material: carbide Coating: CVD Grade: T9215 Chipbreaker: double-sided Hole style: cylindrical hole Shape: triangular Application: turning Compatible with ISO holders FAQ What materials is this insert suited for? The insert is formulated for medium steel machining; the CVD-coated carbide grade T9215 offers a balance of wear resistance and toughness for continuous to light interrupted cuts. How does the chipbreaker affect performance? The double-sided chipbreaker is designed to produce predictable chips and good evacuation, improving surface finish and reducing the likelihood of built-up edge during turning operations. Which holders are compatible with this insert? Compatibility is determined by holder form, clearance angle, tolerance class, fixing method, size and thickness; the insert follows ISO geometry for straightforward fitting in standard ISO holders. Can this insert be used for internal and external turning? Yes, the geometry and grade are suitable for both external and internal turning when paired with the appropriate holder and process parameters. What is the significance of the 1.6 mm corner radius? A 1.6 mm corner radius provides a compromise between edge strength and cutting precision, supporting higher feed rates while maintaining adequate edge resilience. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160416 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide and a robust universal grade (T9225) for reliable medium to heavy steel turning; the ISO triangular form with a 60° geometry and 1.6 mm corner radius ensures versatile performance and stable chip control. Order genuine Tungaloy inserts directly via Metav Werkzeuge or contact our consultants for application guidance. TNMG160416 T9225 TNMG turning insert for steel — Tungaloy The TNMG160416 T9225 is an ISO triangular turning insert designed for medium to heavy steel machining, offering a CVD-coated carbide grade with a double-sided chipbreaker and a cylindrical locating hole. CVD-coated carbide grade T9225 ISO TNMG160416 triangular insert 60° geometry with 1.6 mm corner radius Double-sided chipbreaker, cylindrical hole Reliable performance for medium to heavy steel turning The combination of a CVD-coated surface and carbide substrate gives consistent wear resistance under varying cutting conditions. The T9225 grade is formulated as a robust universal grade, which tolerates intermittent cuts and fluctuating engagement better than finer grades; this means fewer unexpected tool changes during mixed-batch production. Where component tolerance and surface quality are essential, the insert’s 60° geometry contributes to steady cutting forces and predictable metal removal rates, supporting efficient cycle times in serial turning operations. System compatibility and straightforward clamping Being an ISO-standard insert, compatibility with holders depends on geometric parameters such as form, clearance angle (0°), tolerance class, fastening and plate thickness. The triangular shape with a cylindrical locating hole and a plate thickness of 4.76 mm ensures secure seating and repeatable location in standard TNMG pockets. The insert forms part of a system that typically includes a matching external holder, a shim or clamp set and replacement screws; correct matching reduces vibration and enhances tool life, making setup predictable and reproducible across different lathes and holders. Practical economy through indexable design and chip control A double-sided configuration and indexed design extend usable cutting edges per insert, improving cost-efficiency in batch production. The double-sided chipbreaker helps to shape and evacuate chips consistently when machining steel, reducing the risk of built-up edge and improving surface finish without the need for additional finishing passes. For workshops aiming to balance tool cost and uptime, the T9225 grade offers a pragmatic solution: durable enough for sustained runs, yet versatile for job-shop variability. Clear benefits for process security and handling Because the insert is ISO-standardised, stock keeping and tool changeover are simplified: identical geometry and reference designations enable rapid replacement and reduced machine downtime. The 1.6 mm corner radius provides a compromise between edge strength and achievable surface finish, suitable for external and internal turning tasks where strength is needed at the cutting edge. Material identification as carbide signals suitability for steel workpieces and aligns with standard speeds and feeds guidelines for medium-to-heavy machining. Contact Metav Werkzeuge today for tailored advice and to order genuine Tungaloy TNMG160416 T9225 turning inserts — technical consultants are available to recommend the optimal holder and cutting parameters for each application Technical data Article number: 6780866 Manufacturer SKU: TUN6780866 SKU: 6780866-Tungaloy Facts Corner radius: 1.6 mm Insert size: 16 mm Plate thickness: 4.76 mm Clearance angle: 0° Main angle: 60° ISO designation: 160416 Special features Material: carbide Grade/coating: T9225, CVD-coated carbide Geometry: triangular, double-sided chipbreaker Hole: with cylindrical hole Application: turning Series: ISO turning inserts System components: insert, holder, shim/clamp set, replacement screws FAQ What materials is this insert suitable for? The TNMG160416 T9225 insert from Tungaloy is intended primarily for steel machining and is formulated as a robust universal grade for medium to heavy cutting conditions. How does the T9225 grade affect tool life? The T9225 CVD-coated carbide provides enhanced wear resistance compared with uncoated grades, so the Tungaloy insert maintains cutting performance over longer runs under mixed or interrupted cuts. Is the insert compatible with standard TNMG holders? Compatibility is achieved when holder form, clearance angle (0°), tolerance class, fastening and size match the ISO TNMG160416 geometry; use matched clamping and the recommended shim set for secure seating. What advantages does the double-sided chipbreaker offer? The double-sided chipbreaker ensures consistent chip formation and evacuation for improved surface finish and reduced risk of built-up edge during steel turning with the Tungaloy TNMG160416 T9225 insert. Can the insert be indexed to use both cutting edges? Yes, the triangular, double-sided design permits indexing to present fresh edges, extending the service life of each insert and improving overall economy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160416 T9225 Wendeplatten - Tungaloy
Benefit from the combination of a CVD-coated carbide T9225 grade and the ISO TNMG160416 geometry with a 1.6 mm corner radius and 60° cutting angle for stable, productive turning in medium-to-heavy steel; Order the insert directly via Metav Werkzeuge or ask our consultants if needed. TNMG160416 T9225 – ISO TNMG turning insert by Tungaloy, CVD-coated carbide, 60° the TNMG160416 T9225 is an ISO-standard triangular turning insert designed for robust external and internal turning in medium-to-heavy steel applications CVD-coated carbide grade T9225 ISO TNMG 160416 triangular form 60° cutting geometry, 1.6 mm corner radius Double-sided chipbreaker, cylindrical hole Engineered for productive medium-to-heavy steel turning The combination of a CVD-coated surface and a carbide substrate in the T9225 grade delivers balanced toughness and wear resistance for demanding turning operations. This composition is intended to maintain a stable cutting edge under varying engagement conditions and to tolerate slightly interrupted cuts, which reduces unplanned tool changes and supports continuous production. The result is improved productivity through longer effective cutting periods and more predictable process behaviour, with the coating contributing to increased resistance against abrasive wear and thermal loading. Precision geometry for reliable holder compatibility and repeatable results Compliance with the ISO TNMG geometry ensures predictable fit and orientation when selecting a matching external holder or boring bar. Key measurable characteristics—1.6 mm corner radius, 16 insert size and 4.76 mm thickness, a 0° relief angle and 60° cutting angle—simplify the selection of the correct clamping kit and fastening components. Compatibility depends on form, relief angle, tolerance class, fixing method, size and thickness; using ISO-matched components reduces setup time and minimises the risk of incorrect assembly, leading to consistent repeatability and surface quality. Shop-floor advantages: chip control, re-indexing and application range The double-sided chipbreaker design and the cylindrical hole for secure fastening support stable chip formation and quick indexing. These features make the insert suited to both external and internal turning where changing engagement or interrupted cuts occur. The robust universal nature of the grade enables shop-floor flexibility: fewer different grades are needed for mixed batch production, lowering tooling inventory and simplifying process planning. Together, chip control and ease of indexing translate into shorter downtimes and more efficient tool utilisation. Choose Tungaloy's T9225 inserts for reliable medium-to-heavy turning and contact Metav Werkzeuge for tailored recommendations or to place an order: info@metav-werkzeuge.com, +49 2822 7131930 Technical Data Manufacturer article number: 6944866 Manufacturer SKU: TUN6944866 Product SKU: 6944866-Tungaloy Designation: TNMG160416 T9225 Dimensions & Geometry Corner radius: 1.6 mm Insert size: 16 Thickness: 4.76 mm Relief angle: 0° Cutting angle: 60° Features & Applications Material: carbide Grade/coating: CVD-coated, T9225 Chipbreaker: double-sided Hole style: cylindrical hole Series: ISO turning inserts Application: turning (external and internal) Compatibility determined by form, relief, tolerance, fixing, size, thickness FAQ Which materials is this insert suitable for? The TNMG160416 T9225 insert from Tungaloy is intended primarily for medium-to-heavy steel turning and performs well where robustness and stable chip formation are required. Is the T9225 grade suitable for interrupted cuts? Yes. The T9225 composition is a robust universal grade designed to tolerate changing engagement and light interruptions, offering improved edge stability in such conditions. How is compatibility with tool holders ensured? Compatibility is achieved through the ISO TNMG form: matching must consider insert form, relief angle, tolerance class, fixing method, size and thickness to ensure correct clamping and predictable cutting behaviour. Can the insert be re-indexed to extend service life? The double-sided design allows re-indexing; reversing or rotating the insert restores fresh cutting edges and extends the effective service life before replacement is required. What advantages does the CVD coating provide? The CVD-coated layer increases wear resistance and thermal stability, which helps maintain a sharper cutting edge under higher cutting temperatures and abrasive conditions, contributing to longer tool life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160416 T9225 Wendeplatten - Tungaloy
The combination of a CVD-coated carbide grade and a 1.6 mm nose radius provides robust, repeatable cutting in medium-to-heavy steel turning; the ISO triangular geometry and cylindrical hole ensure rapid, reliable clamping. Order the TNMG160416 T9225 insert directly via Metav Werkzeuge or consult our technical advisers for optimal application matching. TNMG160416 T9225 ISO triangular turning insert by Tungaloy — CVD-coated carbide, 60° included angle TNMG160416 T9225 is a triangular ISO indexable insert designed for turning applications in medium-to-heavy steel machining, offering a balance of toughness and wear resistance for variable cutting conditions CVD-coated carbide grade T9225 60° triangular insert with 1.6 mm nose radius Double-sided chipbreaker for stable chip control ISO-standard compatibility with cylindrical-hole clamping Robust performance for demanding steel turning The CVD-coated carbide substrate in this insert provides enhanced wear resistance while retaining the toughness needed for intermittent cuts and variable engagement. The T9225 grade is formulated as a robust universal grade for medium-to-heavy steel machining, which means fewer insert changes and more uptime on production runs. With a 1.6 mm nose radius, the geometry balances edge strength and surface finish, helping to maintain dimensional stability under heavier radial loads. The proven combination of substrate and coating supports predictable tool life and consistent component quality. Fast integration and secure clamping for efficient setup Designed to the ISO standard, the triangular form and 60° included angle make the insert compatible with a wide range of standard external holders and boring bars. The cylindrical hole and matching clamping systems ensure repeatable positioning and reduced setup time, lowering fixture-related variability. At a thickness of 4.76 mm, the insert offers sufficient support in the pocket to resist vibration under tougher cuts while the double-sided chipbreaker promotes controlled chip formation, aiding coolant flow and tool stability. These attributes translate into smoother process integration and fewer interruptions on the shop floor. Durable edge control and predictable chip management The double-sided chipbreaker paired with the CVD-coating delivers reliable chip control across varying cut depths and feed rates, reducing the risk of snarled chips and workpiece rework. The robust universal grade provides balanced performance where cutting conditions fluctuate, such as interrupted cuts or mixed-material batches. This results in improved process reliability and less need for frequent grade changes. For quality-sensitive production, the insert’s design supports consistent surface finish and repeatable dimensional tolerances, giving machinists confidence in both single-part and batch production environments. For reliable medium-to-heavy steel turning choose the Tungaloy TNMG160416 T9225 insert — contact Metav Werkzeuge for application advice and quick availability Technical data Article number: 6780975 SKU: 6780975-Tungaloy Manufacturer SKU: TUN6780975 Model designation: TNMG160416 Manufacturer: Tungaloy Dimensions & core specifications Insert size: 16 Thickness: 4.76 mm Nose radius: 1.6 mm Relief (free) angle: 0° Included angle: 60° Hole: with cylindrical hole Chipbreaker: double-sided Materials & special features Material: carbide Coating: CVD Grade/sort: T9225 Insert form: triangular Application: turning (external and internal) System components: ISO insert, matching external holder or boring bar, shim/clip set and replacement screws FAQ What materials is this insert best suited for? The TNMG160416 T9225 insert is optimised for medium-to-heavy steel turning; the CVD-coated carbide grade offers wear resistance and toughness suited to variable engagement and interrupted cuts. Can the insert be used in standard ISO holders? Yes, the insert follows ISO triangular geometry and features a cylindrical hole, making it compatible with standard external holders and boring bars designed for TNMG-format inserts. How does the double-sided chipbreaker affect performance? The double-sided chipbreaker ensures controlled chip formation on both faces, improving chip evacuation and contributing to process stability during continuous and interrupted turning operations. What edge radius should be selected for surface finish versus strength? The TNMG160416 has a 1.6 mm nose radius, which offers a compromise between improved surface finish and enhanced edge strength for heavier cuts; smaller radii can be chosen on inserts with different specifications if finer finishes are required. Is the T9225 grade suitable for mixed-production environments? Yes, the T9225 universal grade is formulated for versatility and performs well across varying cutting parameters, making it appropriate for shops with mixed or changing workpieces. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com