VBMT 160404 T9225 Wendeplatten - Tungaloy
Robust CVD‑coated T9225 grade combined with the TM chipbreaker and ISO VBMT geometry delivers dependable performance in medium to heavy steel turning; the combination supports stable chip control and prolonged tool life. Order the insert directly via Metav Werkzeuge or consult our application specialists for process validation and holder compatibility. VBMT160404-TM T9225 — VBMT 160404 indexable turning insert for turning (Tungaloy) A VBMT160404-TM T9225 insert engineered for ISO-compliant external and internal turning, offering high wear resistance and reliable chip control in interrupted and variable engagement conditions. CVD-coated T9225 for medium‑to‑heavy steel Rhombic insert, 16 mm inscribed circle 0.4 mm corner radius for stable turning Cylindrical hole with 40°–60° countersink High cutting performance for demanding steel turning The combination of the T9225 CVD‑coated cemented carbide and the TM chipbreaker is designed to balance toughness and wear resistance in the face of changing cut conditions. This grade provides increased edge security during medium to heavy-duty operations and supports longer tool life under fluctuating engagement or light interruptions. The coated substrate improves resistance to abrasive wear while the chipbreaker shapes chips for controlled evacuation, reducing the risk of workpiece damage and machine downtime. Overall, the insert translates material and coating technology into measurable process stability and efficiency. Proven fit and quick mounting to standard holders ISO geometry ensures predictable compatibility with commercial toolholders: the 16 mm inscribed circle and 4.76 mm thickness match common VBMT toolholder pockets, while the 35° approach angle and 5° clearance angle influence cutting forces and surface finish. The insert’s 0.4 mm radius provides a compromise between edge strength and finish quality. The cylindrical hole with one-sided countersink (40°–60°) secures repeatable clamping and simple replacement during set‑up. These standardised dimensions reduce tool inventory complexity and speed changeovers, supporting leaner workflows on the shop floor. Application guidance and production benefits Intended primarily for external and internal turning, the insert performs best when the TM chipbreaker and T9225 grade are matched to the workpiece material, feed and stability of the set‑up. Selection of cutting data should favour the grade’s robustness for slightly interrupted cuts and variable engagement; this supports consistent part quality and lower overall tooling costs through fewer changes and longer edge life. If process validation or material‑specific recommendations are required, Metav Werkzeuge’s technical advisers can supply cutting parameters and holder checks — contact info@metav-werkzeuge.com or call +49 2822 7131930 for application support. Contact Metav Werkzeuge for tailored application advice on Tungaloy inserts or to arrange supply of the VBMT160404-TM T9225 via Metav Werkzeuge; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6781501 Manufacturer SKU: TUN6781501 SKU: 6781501-Tungaloy Label: VBMT160404-TM T9225 Facts Inscribed circle: 16 mm Thickness: 4.76 mm Approach angle: 35° Clearance angle: 5° Corner radius: 0.4 mm Special features Material: cemented carbide Coating: CVD Grade: T9225 Chipbreaker: TM Plate form: rhombic Hole: cylindrical hole with 40°–60° one-sided countersink ISO series: ISO turning inserts FAQ What materials is this insert best suited for? The VBMT160404-TM T9225 is optimised for medium to heavy steel turning; the T9225 CVD coating and cemented carbide substrate offer wear resistance suitable for varying steel grades. Can the insert handle interrupted cuts? Yes, the T9225 grade and TM chipbreaker provide the toughness required for slightly interrupted cuts and variable engagement during turning operations. Which toolholders are compatible with this insert geometry? Holders designed for VBMT‑type rhombic inserts with a 16 mm inscribed circle and 4.76 mm thickness are compatible; the ISO VBMT form ensures standard fitment. How does the TM chipbreaker affect chip control? The TM chipbreaker shapes and breaks chips to improve evacuation and reduce entanglement, contributing to safer machining and more consistent surface finishes when using the Tungaloy VBMT160404-TM T9225 insert. What are the key dimensions to check during set‑up? Verify the inscribed circle (16 mm), thickness (4.76 mm), approach angle (35°), clearance angle (5°) and the 0.4 mm corner radius to ensure correct seating and cutting geometry. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBMT 160404 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide grade (T9225), a robust TSF chipbreaker and a precise 0.4 mm corner radius for dependable medium to heavy steel turning; order directly via Metav Werkzeuge or ask the consultants for suitability and supply. VBMT 160404 T9225 – Turning insert (VBMT160404-TSF) by Tungaloy A VBMT 160404 T9225 ISO turning insert engineered for medium to heavy steel turning, offering a CVD-coated carbide grade and a TSF chipbreaker for interrupted and variable cutting conditions CVD-coated carbide T9225 for durable cutting Universal grade for medium to heavy steel Rhomboid 16 mm geometry, 5° relief angle 0.4 mm corner radius with TSF chipbreaker Boosted throughput through a tougher grade and coating The combination of the T9225 grade and a CVD-coated carbide substrate provides increased resistance to flank and crater wear under demanding steel-turning conditions. This insert is optimised for sustained cutting in the mid-to-heavy machining range, where variable engagement and occasional interruptions require additional toughness rather than only hardness. The result is more consistent tool life, fewer unplanned index changes and improved machine uptime, which directly translates into higher component throughput and predictable production cycles. Consistent geometry for repeatable accuracy and surface quality A defined rhomboid geometry with a 16 mm size, a 0.4 mm corner radius and a 5° relief angle ensures stable cutting behaviour and predictable chip flow. The modest corner radius balances edge strength with achievable surface finish, while the relief angle reduces rubbing on the flank, lowering heat build-up and improving dimensional repeatability. The insert’s central hole with a cylindrical bore and one-sided countersink (40°–60°) guarantees secure clamping, minimising micro-movements that can affect concentricity and final surface integrity. Application-led design: optimised for steel turning and interrupted cuts Equipped with the TSF chipbreaker, the insert is tailored to fragment and evacuate chips effectively when turning steel under varying engagement depths. A chipbreaker influences chip curl and thickness; the TSF profile is chosen to suit the grade’s toughness and the intended application, improving process reliability and reducing the risk of chip entanglement. Compatibility with ISO-format toolholders is determined by the insert’s form, relief angle, tolerance class, fastening and thickness — a standardised approach that simplifies holder selection and toolroom inventory management. Economical machining with predictable change intervals By combining a universal robust grade with a practical chipbreaking geometry, the insert offers an attractive balance between performance and cost-efficiency. Fewer premature index changes and more uniform wear patterns reduce handling time and tool cost per component. For production planners this means easier lifecycle forecasting and lower administrative overhead for reordering. The insert’s standard ISO designation and clear sizing support quick replenishment and straightforward logistics in any modern turning cell. For tailored advice on incorporating Tungaloy T9225 inserts into production or for order and availability information, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the best insert configuration for the application Technical data Article number: 6781473 Manufacturer SKU: TUN6781473 Label / designation: VBMT160404-TSF T9225 SKU: 6781473-Tungaloy Facts Material: carbide Grade / coating: T9225, CVD-coated ISO size code: 160404 Insert thickness: 4.76 mm Insert size: 16 mm Corner radius: 0.4 mm Relief angle: 5° Wedge/lead angle: 35° Special features Geometry: rhomboid Chipbreaker: TSF Hole type: cylindrical hole with one-sided countersink (40°–60°) Application: turning (external and internal) Model series: ISO turning indexable inserts FAQ What materials is this insert designed for? The Tungaloy VBMT 160404 T9225 insert is designed primarily for medium to heavy steel machining and performs reliably under variable engagement and slightly interrupted cuts. How does the TSF chipbreaker affect machining? The TSF chipbreaker on the VBMT160404-TSF promotes controlled chip formation and evacuation, reducing the risk of chip entanglement and supporting stable cutting when turning steel. Is the insert compatible with standard ISO toolholders? Compatibility depends on the holder’s form, free angle, tolerance class, fastening, size and thickness; the VBMT160404-TSF follows ISO standards, which simplifies matching to appropriate external holders and boring bars. What does the 0.4 mm corner radius mean for surface finish? A 0.4 mm corner radius provides a compromise between edge strength and the achievable surface finish; it improves edge life while still allowing good surface quality for typical steel turning operations. How is the insert secured in the holder? The insert has a central cylindrical hole with a one-sided countersink (40°–60°) that ensures positive clamping and repeatable positioning when used with the correct clamping set and screw. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBMT 160404 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide T9225 grade for toughness, the PSF chipbreaker for reliable chip control and the ISO VBMT160404 form for straightforward toolholder compatibility to keep turning operations productive; order the insert directly via Metav Werkzeuge or consult the technical advisers if required. VBMT 160404 T9225 indexable insert for turning — Tungaloy The VBMT160404-PSF T9225 is an ISO-standard indexable insert designed for medium to heavy steel turning, offering robust cutting performance under variable engagement conditions. CVD-coated carbide for heavy-duty turning 0.4 mm corner radius for reliable chip control ISO VBMT160404 form, 5° relief angle Cylindrical hole with single-sided countersink High reliability for interrupted and mixed cuts The combination of a CVD-coated substrate and the T9225 grade delivers increased fracture resistance under fluctuating engagement conditions. This makes the insert particularly suitable for medium to heavy steel turning, where periodic interruptions or variable feed conditions can otherwise reduce tool life. The material selection and coating process emphasise toughness and thermal stability, so machining cycles benefit from fewer unscheduled tool changes and more consistent performance. Controlled chips and consistent surface quality Equipped with the PSF chipbreaker and a 0.4 mm corner radius, the geometry promotes predictable chip formation and evacuation. The 35° lead angle reduces cutting forces and helps to distribute load across the cutting edge, which supports a steady surface finish during external and internal turning operations. These design choices lower the risk of built-up edge and improve process stability when working with a range of steel grades. ISO compatibility for fast tool changes The insert follows the ISO VBMT160404 specification and is manufactured with a 4.76 mm thickness and a 16 mm inscribed circle, ensuring compatibility with standard indexable toolholders. A cylindrical hole with a single-sided countersink (40°–60°) secures repeatable clamping and precise seating in the holder. Tool selection should consider form, relief angle, tolerance class and attachment method to guarantee correct fitment and repeatable results. Productive economics and application guidance Using a robust universal grade like T9225 can reduce tooling stock complexity by covering a broad range of steels with one insert family. The carbide construction and CVD coating support longer edge life in tougher cuts, which contributes to lower total cost per component in volume production. Assistance with grade selection, chipbreaker matching and machining parameters can be provided by Metav Werkzeuge to align the insert’s capabilities with specific process requirements. For precise medium-to-heavy turning tasks, consider the Tungaloy VBMT160404-PSF T9225 insert and contact Metav Werkzeuge for tailored application advice and availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Manufacturer article number: 6781114 SKU: 6781114-Tungaloy Manufacturer SKU: TUN6781114 Model series: ISO-Drehwendeschneidplatten Facts Inscribed circle: 16 mm Thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 5° Lead/approach angle: 35° Countersink angle: 40°–60° Special features Grade: T9225 Coating/type: CVD-coated carbide Chipbreaker: PSF Shape: rhombic (VBMT) Hole: cylindrical hole with single-sided countersink Application: turning Material base: carbide FAQ What materials is this insert suitable for? The VBMT160404-PSF T9225 from Tungaloy is formulated as a robust universal grade for medium to heavy steel machining and performs well under varying engagement conditions. How does the PSF chipbreaker affect cutting? The PSF chipbreaker on the VBMT160404-PSF promotes short, controlled chips and supports a consistent surface finish during turning operations with the T9225 grade. Is this insert compatible with standard toolholders? Yes, the ISO VBMT160404 form and the cylindrical hole with countersink are designed for compatibility with matching indexable turning holders when form, relief angle and tolerances correspond. What edge life and productivity benefits can be expected? With a CVD-coated carbide substrate and the T9225 grade, the insert is optimised for extended edge life in medium-to-heavy cutting, which can reduce tooling changes and improve overall productivity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBMT 160408 AH120 Wendeplatten - Tungaloy
VBMT 160408 AH120 ISO-Drehwendeschneidplatte für Drehen — Tungaloy Die VBMT 160408 AH120 ist eine ISO-genormte rhombische Wendeschneidplatte mit PVD-beschichtetem Hartmetall, geeignet für präzises Außen- und Innendrehen in produktiven Fertigungsprozessen PVD-beschichtetes Hartmetall AH120 für lange Standzeit PS-Spanbrecher für stabile Spanform und Prozesssicherheit Rhombische Form 16 mm kompatibel zu ISO-Haltern Mit zylindrischem Loch und einseitiger Senkung Eckenradius 0,8 mm für feine Schneidkante Effiziente Zerspanung und Wirtschaftlichkeit optimieren Die Wendeschneidplatte wurde für produktive Drehprozesse entwickelt und verbindet Prozesssicherheit mit hoher Wirtschaftlichkeit. Durch die Kombination aus scharfer Schneidkante und verschleißfester Sorte erreichen Fertigungen konstante Bearbeitungsergebnisse bei geringen Stillstandszeiten. Die PS-Spanbrecher sorgen für kontrollierte Spanbildung und reduzieren Nacharbeit, sodass Durchsatz und Bauteilqualität in Serienprozessen gesteigert werden können. Anwender profitieren von planbaren Werkzeugwechselintervallen und reproduzierbarer Oberflächengüte. Material und Beschichtung: Warum AH120 einen Unterschied macht Die Platte besteht aus Hartmetall mit PVD-Beschichtung und der Sorte AH120, die speziell auf Verschleißfestigkeit und Ausbruchssicherheit ausgelegt ist. Die PVD-Beschichtung erhöht die Wärme- und Verschleißbeständigkeit der Schneidkante, wodurch die Standzeit in anspruchsvollen Drehoperationen verlängert wird. PVD steht für Physical Vapor Deposition und beschreibt ein Verfahren, das eine dünne, hart haftende Schicht erzeugt; das Ergebnis ist eine beständige Schneidkante mit geringer Neigung zu Ausbrüchen bei hohen Schnittbedingungen. Konstruktion und Kompatibilität für sichere Montage Die rhombische Platte im Format 16 mm ist ISO-genormt und lässt sich mit passenden Außenhaltern oder Bohrstangen einsetzen. Entscheidend für die Kompatibilität sind Form, Freiwinkel 5°, Toleranzklasse, Befestigungsart, Größe und Plattendicke 4,76 mm. Die Ausführung „mit Loch“ und die zylindrische Lochform mit einseitiger Senkung (40°–60°) ermöglichen sichere Positionierung und festen Sitz auf dem Halter. So bleibt die Schneidlage stabil, was Vibrationen minimiert und die Standzeit positiv beeinflusst. Einsatzbereiche und Zielgruppen Die Wendeschneidplatte eignet sich vor allem für industrielle Werkstätten und Serienfertiger, die auf Prozessstabilität und reproduzierbare Ergebnisse angewiesen sind. Typische Anwendungen sind Außen- und Innendrehen, wobei die Auswahl der Sorte und des Spanbrechers an Werkstoff, Bearbeitungsart und Maschinenstabilität angepasst wird. Die VBMT160408-PS AH120 bietet sich an, wenn eine dünne, scharfe Schneidkante mit hoher Verschleißfestigkeit gefordert ist und gleichbleibende Bauteilqualität im Vordergrund steht. Empfehlung: Setzen Sie auf die AH120-Sorte von Tungaloy für maximale Prozesssicherheit und lange Standzeiten; bei Fragen erreichen Sie Metav Werkzeuge per eMail info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 Produktmerkmale Artikelnummer: 6848990 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VBMT160408-PS AH120 Hersteller SKU: TUN6848990 SKU: 6848990-Tungaloy Fakten Eckenradius: 0,8 mm Winkel: 35° Freiwinkel: 5° Plattendicke: 4,76 mm Plattengröße: 16 mm Besonderheiten Material: Hartmetall Schneidstoff: PVD-beschichtetes Hartmetall Sorte: AH120 Spanbrecher: PS — Spanbrecher für stabile Spanform Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Plattenform: rhombisch Systemaufbau: ISO-Drehplatte, passender Außenhalter oder Bohrstange, Unterlage/Klemmsatz und Ersatzschrauben FAQ Welche Vorteile bietet die AH120-Sorte bei Drehanwendungen? Die AH120-Sorte kombiniert hohe Verschleißfestigkeit mit Ausbruchssicherheit, wodurch die VBMT160408-PS AH120 von Tungaloy besonders für anspruchsvolle Drehprozesse geeignet ist, in denen eine scharfe Schneidkante und konstante Ergebnisse gefordert werden. Für welche Halter ist die Platte kompatibel? Die Platte ist ISO-genormt; die Kompatibilität hängt von Form, Freiwinkel, Toleranzklasse, Befestigungsart, Größe und Dicke des Halters ab. In der Praxis wird die VBMT160408-PS AH120 mit standardisierten Außenhaltern und Bohrstangen verwendet. Was bewirkt der PS-Spanbrecher konkret? Der PS-Spanbrecher erzeugt kontrollierte Spanform und sorgt für sichere Spanableitung, was die Prozessstabilität erhöht und die Oberflächengüte der bearbeiteten Bauteile verbessert. Wie trägt die PVD-Beschichtung zur Standzeit bei? Die PVD-Beschichtung verbessert die Wärme- und Verschleißbeständigkeit der Schneidkante; dadurch sinkt die Abnutzung bei hohen Schnittbedingungen und die Standzeit der VBMT160408-PS AH120 wird verlängert. Welche Maße sind für die Auswahl des richtigen Plattentyps relevant? Wichtige Maße sind Eckenradius, Plattengröße, Plattendicke und Frei- sowie Keilwinkel. Bei der VBMT160408-PS AH120 sind besonders der Eckenradius 0,8 mm, die Plattengröße 16 mm und die Plattendicke 4,76 mm zu beachten. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VBMT 160408 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated AH6225 grade, a 0.8 mm corner radius and ISO VBMT geometry for stable edge life and consistent turning of stainless steels. Order the insert directly via Metav Werkzeuge or ask our consultants if needed. VBMT160408-PS AH6225 — ISO turning indexable insert, PVD-coated carbide (Tungaloy) A VBMT160408-PS AH6225 ISO turning insert designed for reliable external and internal turning of stainless steels in medium-duty and variable machining conditions. PVD-coated AH6225 grade 0.8 mm corner radius Cylindrical hole with 40°–60° countersink 4.76 mm plate thickness Consistent performance where material variability occurs The combination of a PVD-coated surface and the AH6225 carbide grade delivers a predictable cutting behaviour across a wide range of stainless steels. The PVD coating reduces built-up edge and improves surface finish, while the substrate maintains edge stability under intermittent cuts. This balance of coating and substrate ensures fewer tool changes and steadier cycle times, making the insert a practical choice for workshops seeking reliable productivity without overcomplicating process parameters. Geometry engineered for repeatable results and edge security The rhombic VBMT form with a 0.8 mm corner radius and 5° clearance angle provides a secure cutting geometry for general turning and light profiling. The included 35° configuration and the PS chipbreaker guide chip flow to prevent entanglement and support continuous cutting. Explained simply: the modest corner radius reduces peak cutting loads while the chip control features lower the risk of vibration, which results in improved surface quality and consistent dimensional outcomes on parts. System compatibility and straightforward integration As an ISO-standardised indexable insert, compatibility with holders is determined by form, clearance, tolerance class, fastening method, size and thickness. The insert’s 4.76 mm thickness and 16 mm size suit a broad range of external holders and boring bars; the cylindrical hole with single-sided countersink enables secure clamping and repeatable indexing. This means easier inventory management: one ISO designation matches multiple clamping systems, reducing the need for bespoke tooling. Productivity, tool life and practical application advice Designed for medium cutting conditions, the insert enables efficient turning with an emphasis on stable chip formation and extended tool life. The AH6225 grade is tuned to provide a sharp yet robust cutting edge, useful when workpieces vary between free-machining and tougher stainless alloys. For best results, pair the insert with a rigid setup, appropriate coolant strategy and holder with correct lead angle; modest feeds and controlled depth of cut will maximise the balance between surface quality and wear resistance. Select the Tungaloy AH6225 grade for dependable stainless-steel turning and contact Metav Werkzeuge for availability and application guidance via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6831895 SKU: 6831895-Tungaloy Manufacturer SKU: TUN6831895 Model series: ISO turning indexable inserts WPL designation: VBMT160408-PS AH6225 Numbers / core technical data Corner radius: 0.8 mm Clearance angle: 5° Included angle: 35° Plate thickness: 4.76 mm Plate size: 16 mm Designs / special features Coating: PVD-coated Grade: AH6225 Substrate: carbide Chipbreaker: PS Plate shape: rhombic Hole style: cylindrical hole + single-sided countersink (40°–60°) Typical application: external and internal turning FAQ What materials is this insert suitable for? The VBMT160408-PS AH6225 is formulated primarily for stainless steels; the AH6225 grade and PVD coating help control built-up edge and maintain performance across varied stainless alloys. Which holders fit the ISO VBMT geometry? Any holder or boring bar designed for the VBMT form and matching size, thickness and clamping style will be compatible; the insert’s standard ISO dimensions allow straightforward integration. What does the PS chipbreaker do in practice? The PS chipbreaker promotes controlled chip segmentation and safe evacuation during turning, which supports steady cutting and reduces risk of chip interference. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBMT 160408 AH6225 Wendeplatten - Tungaloy
Benefit from a PVD‑coated AH6225 grade that combines a sharp yet stable cutting edge with a 0.8 mm corner radius for consistent medium‑duty turning in stainless applications; the ISO form and TM chipbreaker support reliable chip control and straightforward tool integration. Order the VBMT160408‑TM AH6225 directly via Metav Werkzeuge or ask our consultants if needed. VBMT160408-TM AH6225 — ISO turning insert, PVD-coated carbide (Tungaloy) VBMT160408-TM AH6225 is an ISO‑standard rhombic indexable insert for external and internal turning, optimised for stainless applications and medium machining tasks. PVD-coated carbide grade AH6225 Universal for stainless applications Rhombic 16 mm ISO format Edge radius 0.8 mm Stable cutting performance for stainless applications The PVD‑coated AH6225 grade is engineered to deliver a sharp but robust cutting edge, balancing edge stability with the ability to cut reactive alloys. This results in reduced built‑up edge and improved surface finish when machining tougher stainless grades. The PVD layer increases wear resistance under fluctuating temperatures and interrupted cuts, making the insert suitable for variable shop conditions and mixed production runs. For process planners, the combination of coating and carbide substrate means longer tool life and more predictable regrinding intervals, supporting higher first‑pass yields. Seamless integration with ISO tool systems The rhombic 16 mm ISO format and standard geometry allow quick replacement and minimal adjustment when swapping inserts. Compatibility with holders depends on form, 5° clearance, tolerance class, fastening method and plate thickness; this standardisation reduces setup time and lowers the risk of assembly errors. The insert’s 35° orientation and 4.76 mm thickness are common in external and internal turning tool assemblies, enabling economical toolholder pooling across similar operations. For production engineers, this means faster changeovers and a simplified tooling inventory. Reliable chip control and repeatable results The TM chipbreaker is optimised for medium cuts and supports consistent chip formation with a 0.8 mm corner radius that helps maintain edge strength during depth changes. Effective chip control reduces recutting, improves surface quality and lowers the likelihood of part damage in automated turning processes. Choosing the correct chipbreaker and grade for the material and machine stability will yield measurable productivity gains and reduce cycle time variability. For applications requiring controlled chip flow, the indexed nature of the insert ensures quick rotation to a fresh cutting edge with minimal downtime. Contact Metav Werkzeuge for tailored cutting data, availability and application support for the VBMT160408‑TM AH6225 insert; reach out at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6947738 SKU: 6947738-Tungaloy Type: VBMT160408-TM AH6225 Material: carbide Coating: PVD-coated Application: Turning Model series: ISO turning inserts Chipbreaker: TM Grade: AH6225 Core data Corner radius: 0.8 mm Insert size: 16 mm Plate thickness: 4.76 mm Clearance angle: 5° Approach angle: 35° Hole: with hole Hole style: cylindrical hole + single-sided countersink (40°–60°) Special features Rhombic plate form ISO-standard indexable format Universal grade for stainless applications Sharp yet stable cutting edge design Suitable for external and internal turning Compatible with standard ISO holders depending on form and tolerance FAQ What materials is this insert suitable for? The VBMT160408‑TM AH6225 insert is formulated as a universal grade for rostfreie Stähle and offers good performance across a wide stainless material range. Which toolholders fit this ISO insert? Compatibility depends on holder form, free angle, tolerance class, fastening and plate thickness; use holders designed for VBMT 160408 ISO plates to ensure correct fit. What does the TM chipbreaker provide? The TM chipbreaker promotes controlled chip formation for medium cuts, improving surface finish and reducing recutting when using the AH6225 grade. Can this insert be used for internal turning as well as external turning? Yes, the ISO rhombic geometry and strength of the cutting edge make the insert suitable for both external and internal turning operations. How is the insert identified in stock and orders? Reference Tungaloy article number 6947738 or SKU 6947738‑Tungaloy when ordering the VBMT160408‑TM AH6225 insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBMT 160408 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp, stable cutting edge, PVD-coated carbide for extended tool life, and reliable chip control for consistent production results; order the inserts directly via Metav Werkzeuge or consult the team for application-specific recommendations. VBMT 160408 AH6225 — ISO indexable turning insert for turning by Tungaloy A VBMT160408-TSF AH6225 ISO indexable insert engineered for external and internal turning, optimised for machining rostfreier Stahl with a balance of sharpness and edge stability PVD-coated carbide grade AH6225 Optimised TSF chipbreaker Compatible with ISO turning holders 35° lead angle and 0.8 mm nose radius Greater productivity through a resilient cutting concept The combination of a PVD-coated carbide substrate and the AH6225 grade delivers both wear resistance and a consistently sharp edge, enabling stable performance in medium cutting conditions. This balance reduces tool changes and stabilises cycle times, which translates into measurable productivity gains on the shop floor. The coated grade lowers friction and helps to manage thermal loads when machining rostfreier Stahl, so the result is improved tool life and fewer interruptions to production. Reliable chip formation for safer, cleaner processes The TSF chipbreaker is designed to produce controllable, short chips under a range of feeds, reducing the risk of entanglement and improving operator safety. Controlled chip flow also aids coolant access and supports a predictable surface finish on turned components. By combining the chipbreaker geometry with a low-friction coating, the insert minimises built-up edge and helps maintain dimensional consistency during longer runs, supporting higher first-pass yield and less rework. Seamless integration with standard ISO systems Compatibility is ensured by ISO sizing and key dimensional features: 16 mm inscribed size, 4.76 mm plate thickness, a 5° relief angle and a central hole with a cylindrical bore plus one-sided countersink for secure and repeatable clamping. These specifications align the insert with common outside holders and boring bars; the full system comprises the insert, a matching outer holder or boring bar, a backing shim/clamping kit and replacement clamp screws. Clear interface standards make tool set-up straightforward and reduce downtime when changing tools. Practical guidance for typical turning applications This insert is intended for external and internal turning under varying conditions where a sharp, stable edge is required—especially on rostfreier Stahl. The 0.8 mm nose radius and a 35° lead angle support a mix of general finishing and medium cutting tasks, delivering a balance between form accuracy and surface quality. Select feed and cutting data appropriate to the workpiece and machine rigidity; the insert’s design tolerates fluctuating conditions, giving a flexible option for mixed batches and small-series production. Contact Metav Werkzeuge for tailored recommendations on Tungaloy inserts and to secure VBMT160408-TSF AH6225 stock for reliable rostfreier Stahl turning — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6947730 Manufacturer SKU: TUN6947730 Item SKU: 6947730-Tungaloy Model series: ISO indexable turning inserts ISO designation: VBMT160408-TSF Material: carbide Coating / grade: AH6225 (PVD-coated) Application: Turning Manufacturer: Tungaloy Label: VBMT160408-TSF AH6225 Radius: 0.8 Lead / angle: 35 Relief angle: 5° Core dimensions Inscribed size: 16 mm Plate thickness: 4.76 mm Nose radius: 0.8 mm Central hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Design & special features Plate shape: rhombic Chipbreaker: TSF Typical system build: insert + compatible holder/boring bar + backing/shim + clamp screws Typical use: external and internal turning Schneidstofftyp: PVD-coated carbide FAQ What materials is this insert recommended for? The VBMT160408-TSF AH6225 insert is primarily specified for machining rostfreier Stahl; the AH6225 grade and PVD finish support stable cutting in medium conditions. How does the TSF chipbreaker affect machining? The TSF chipbreaker on this indexable insert promotes short, controllable chips, improving surface finish and reducing chip-related interruptions during turning operations. Which holders are compatible with this insert? Compatibility is determined by ISO form, relief angle, tolerance class, mounting and size; use holders and boring bars matching the VBMT160408-TSF geometry and 16 mm inscribed size. What tool life advantages does the AH6225 grade offer? The AH6225 PVD-coated carbide delivers a balance of sharp edge geometry and wear resistance, extending tool life and providing consistent cutting performance on rostfreier Stahl. Is the insert suitable for internal as well as external turning? Yes, the design and dimensions of this ISO insert make it suitable for both external and internal turning tasks when paired with the correct holder or boring bar. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBMT 160408 AH6235 Wendeplatten - Tungaloy
Benefit from a tough PVD-coated carbide grade and a stable rhombic geometry with a 0.8 mm corner radius for reliable turning of stainless and difficult-to-machine parts — order the (VBMT160408-PS AH6235) directly via (Metav Werkzeuge) or ask our consultants if needed. VBMT 160408 AH6235 ISO turning insert for turning, rhombic geometry — Tungaloy VBMT160408-PS AH6235 is an ISO‑standard turning insert designed for general turning and for demanding work on stainless and high‑toughness materials. PVD-coated carbide grade AH6235 Optimised for stainless steel and interrupted cuts Rhombic VBMT shape with 35° lead angle Cylindrical hole with single‑side countersink Stable cutting performance for stainless and demanding materials The PVD-coated AH6235 grade is formulated as a tougher carbide for machining stainless steels and operations with frequent interruptions or elevated breakout risk. The tougher substrate reduces the tendency for chipping and edge failure, while the thin PVD layer improves wear resistance and adhesion control. This combination results in more consistent component quality and extended edge life, which supports higher production uptime and fewer insert changes. The design is particularly suited to faces and profiles where intermittent cuts or built‑up edge would otherwise limit tool life. Geometry and clamping that enhance process security The rhombic VBMT outline with a 35° lead angle and 5° relief angle offers a balanced compromise between chip flow and cutting force direction, making it suitable for both external and internal turning operations. A 0.8 mm corner radius delivers a predictable cutting edge radius that improves surface finish while maintaining strength at the tip. The insert is supplied with a cylindrical hole and a single‑side countersink (40°–60°) for positive clamping compatibility; this ensures repeatable seating in standard ISO‑compatible holders and reduces the risk of movement during heavy cuts. These geometry choices translate into stable machining and fewer rejected parts. Process guidance and economical advantages Selecting the correct chipbreaker and grade is critical: the PS chipbreaker here supports controlled chip formation on medium to tough stainless alloys, lowering spindle downtime due to chip entanglement. The insert’s 4.76 mm thickness and standard 16 mm size conform to common holder systems, simplifying stocking and reducing tooling complexity across multiple machines. From a cost‑efficiency perspective, the tougher grade reduces unexpected edge loss and the need for frequent index changes, making it a productive option for batch and series production where reliable tool life equals measurable savings. Contact Metav Werkzeuge for application‑specific recommendations on Tungaloy cutting data, holder compatibility and optimal feed/speed settings for this insert Technical data Article number: 6890223 Manufacturer SKU: TUN6890223 Label: VBMT160408-PS AH6235 Series: ISO-Drehwendeschneidplatten Material: Hartmetall Coating: PVD-beschichtet Key numerical specifications ISO designation: 160408 Size: 16 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Lead/approach angle: 35° Relief angle: 5° Design and special features Rhombic plate form (VBMT) Chipbreaker: PS Cylindrical hole with single‑side countersink (40°–60°) PVD coating for improved wear resistance Grade: AH6235 — tougher grade for stainless and interrupted cuts FAQ What materials is this insert best suited for? The AH6235 grade is optimised for machining stainless steels and other tougher alloys; the insert's toughness helps resist chipping during interrupted cuts. Which chipbreaker does the insert feature and what is its benefit? The VBMT160408-PS is fitted with the PS chipbreaker, which promotes controlled chip formation on medium to highly ductile materials, improving evacuation and process reliability. Is this insert compatible with standard ISO holders? Yes — the rhombic geometry, ISO designation 160408 and the cylindrical hole with countersink are designed for compatibility with ISO‑compliant turning holders that match form, thickness and clamping style. How does the 0.8 mm corner radius affect surface finish? A 0.8 mm corner radius balances edge strength with surface finish: it reduces the risk of edge chipping while helping to achieve smoother component surfaces compared with very small radii. What distinguishes the AH6235 grade from general-purpose grades? AH6235 is a tougher PVD‑coated carbide grade formulated to withstand interrupted cuts and elevated breakout risk typical of stainless machining, providing longer edge life in challenging conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBMT 160408 AH6235 Wendeplatten - Tungaloy
VBMT 160408 AH6235 Drehwendeschneidplatte für Drehen von Tungaloy Die VBMT 160408 AH6235 ist eine ISO-genormte Drehwendeschneidplatte für das Außen- und Innendrehen, entwickelt für den robusten Einsatz an rostfreien Stählen und unterbrochenen Schnitten. VBMT 160408 AH6235 von Tungaloy Zäher Schneidstoff für rostfreie Stähle PVD-beschichtetes Hartmetall für Standzeit Rhombische Form 16 mm, Eckenradius 0,8 mm Mit zylindrischem Loch und einseitiger Senkung Hohe Prozesssicherheit bei rostfreiem Stahl Die VBMT 160408 AH6235 kombiniert PVD-beschichtung und Hartmetall, um bei anspruchsvollen Anwendungen die Standzeit zu erhöhen. Die zähere Sorte AH6235 reduziert Ausbrüche bei unterbrochenem Schnitt, sodass weniger Nacharbeit erforderlich ist. Für Anwender bedeutet das geringere Rüstzeiten und konstantere Bearbeitungsergebnisse bei der Zerspanung von rostfreiem Stahl. Sichere Spannlage und einfache Kompatibilität ISO-Genormtheit sorgt dafür, dass die Platte mit passenden Außenhaltern und Bohrstangen eingesetzt werden kann; die Kompatibilität wird durch Form, Freiwinkel und Dicke bestimmt. Das zylindrische Loch mit einseitiger Senkung (40°–60°) garantiert eine präzise Positionierung und sichere Klemmsituation, wodurch Vibrationen reduziert und Messergebnisse stabilisiert werden. Empfohlene Anwendung und Spanformerwahl Für Außen- und Innendrehen empfiehlt sich die Auswahl des Spanbrechers PSS passend zur Bearbeitungsart und Werkstückstabilität. Die Sorte AH6235 eignet sich speziell für Anwendungen mit erhöhter Ausbruchgefahr und für unterbrochene Schnitte, wodurch Werkzeugverschleiß kontrolliert und die Produktivität gesteigert werden kann. Technische Begriffe verständlich erklärt Die Eckenradius 0,8 mm beeinflusst die Oberflächengüte und Schnittkraft; kleinere Radien erlauben feinere Konturen, größere Radien erhöhen die Stabilität. Freiwinkel 5° beschreibt den Winkel zwischen Werkzeugrückseite und Werkstück, entscheidend für Spanabfuhr und Schnittdruck. PVD steht für physikalische Dampfabscheidung, eine Beschichtungsmethode, die Härte und Temperaturbeständigkeit erhöht. Für eine wirtschaftliche und zuverlässige Bearbeitung von rostfreien Stählen empfehlen wir die VBMT 160408 AH6235 von Tungaloy; Anfrage über Metav Werkzeuge per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 6890219 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Hersteller Artikelnummer: 6890219 SKU Hersteller: TUN6890219 Material: Hartmetall Plattengröße: 16 mm Plattendicke: 4,76 mm Plattenform: Rhombisch Freiwinkel: 5° Eckenradius: 0,8 mm Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Spanbrecher: PSS Sorte: AH6235 Schneidstofftyp: PVD-beschichtetes Hartmetall Einsatz der Sorte: zähere Sorte für rostfreie Stähle, unterbrochener Schnitt und erhöhte Ausbruchgefahr Anwendung: Drehen Daten Winkel: 35° Radius: 0,8 mm Plattendicke: 4,76 mm Plattengröße: 16 mm Besonderheiten ISO-genormt PVD (Physikalische Dampfabscheidung) Beschichtung Zylindrisches Loch mit Senkung für stabile Montage Rhombische Form 16 für vielseitige Einsatzfälle Spanbrecher PSS zur Spanformung FAQ Für welche Werkstoffe ist die VBMT 160408 AH6235 geeignet? Die VBMT 160408 AH6235 von Tungaloy ist speziell für rostfreie Stähle ausgelegt; die zähere Sorte AH6235 reduziert Ausbrüche und stabilisiert die Bearbeitung bei unterbrochenen Schnitten. Welchen Vorteil bietet die PVD-beschichtung bei dieser Platte? Die PVD-beschichtung erhöht die Oberflächenhärte und die Temperaturbeständigkeit der Tungaloy VBMT 160408 AH6235, was zu längeren Standzeiten und konstanteren Ergebnissen führt. Wie beeinflusst der Eckenradius das Ergebnis? Ein Eckenradius von 0,8 mm sorgt für ein gutes Gleichgewicht aus Schnittstabilität und Oberflächengüte, ideal für präzise Außen- und Innendreharbeiten mit der VBMT 160408 AH6235. Ist die Platte mit gängigen ISO-Haltern kompatibel? Ja, die ISO-Genormung der VBMT 160408 AH6235 gewährleistet die Kompatibilität zu passenden Außenhaltern, wobei Form, Freiwinkel und Dicke beachtet werden müssen. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VBMT 160408 AH725 Wendeplatten - Tungaloy
Take advantage of a universal, PVD-coated AH725 grade for consistent performance across steel and stainless steel, combined with a PS chipbreaker and a 0.8 mm corner radius for reliable chip control and repeatable results; order or request advice directly from Metav Werkzeuge for fast availability. VBMT160408-PS AH725 ISO turning insert — PVD-coated carbide, PS chipbreaker — Tungaloy The VBMT160408-PS AH725 is a rhombic ISO turning insert for external and internal turning, engineered for stable chip formation and high process security in mixed-material production. PVD-coated carbide AH725 grade PS chipbreaker for stable chip control 0.8 mm corner radius for precise turning Consistent process stability for demanding turning tasks The combination of a PVD coating and a wear-resistant carbide substrate provides elevated process reliability under varying cutting conditions. The grade AH725 is formulated to reduce flank wear and preserve a stable cutting edge, which translates into longer tool life and fewer interruptions on the production floor. With the PS chipbreaker integrated, chip formation is controlled even in interrupted cuts and variable feeds, lowering the risk of surface blemishes and tool damage while improving productivity and machine uptime. One grade for multiple materials — efficiency and adaptability Designed as a universal, breakout-resistant option, the AH725 grade suits machining of steel and stainless steel, making it appropriate where material batches vary or tool inventories must be streamlined. The insert’s geometry and chipbreaker selection favour smaller tooling assemblies and operations with high demands on reproducible results. The outcome is simplified tool planning, reduced changeover time and a consistent surface finish when switching between common workshop alloys and stainless steel variants. ISO conformity and secure mounting for dependable integration The insert follows ISO geometry standards as a rhombic plate in size 16 with a 4.76 mm plate thickness, a 5° clearance (freespace) angle and a 35° wedge configuration, ensuring compatibility with standard holders when form, tolerance class, fastening and thickness match. The centre is supplied with hole featuring a cylindrical bore and a single-sided countersink (40°–60°), enabling secure clamping and simple indexability. These dimensional details support predictable clamping forces and repeatable positioning, which together reduce setup variance and increase process repeatability in batch production. For reliable production using Tungaloy’s AH725 grade, contact Metav Werkzeuge for product availability and technical consultation via info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: 6856690-Tungaloy Manufacturer SKU: TUN6856690 Manufacturer article number: 6856690 Brand: Tungaloy Model series: ISO turning indexable inserts Material: carbide Core dimensions Corner radius: 0.8 mm Clearance (freespace) angle: 5° Wedge angle: 35° Plate thickness: 4.76 mm Size: 16 Features Coating: PVD Grade: AH725 Chipbreaker: PS Plate form: rhombic Mounting: with hole (cylindrical + single-sided countersink 40°–60°) Typical application: external and internal turning System components: compatible holder, underlay/clamping set, replacement screws FAQ What materials is this insert suitable for? This insert, the VBMT160408-PS AH725 from Tungaloy, is intended for machining steel and stainless steel and performs well where mixed-material batches occur. How does the PS chipbreaker help in production? The PS chipbreaker on the VBMT160408-PS AH725 promotes controlled chip formation, reducing chip entanglement and improving surface quality during turning. What are the key dimensions to check for holder compatibility? Check the insert size (16), plate thickness (4.76 mm), corner radius (0.8 mm), clearance angle (5°) and the hole/countersink specification to ensure matching with the chosen holder. Is the AH725 grade suitable for small-diameter tooling? Yes; the AH725 grade is designed to be universal and breakout-resistant, making it suitable for smaller assemblies and applications demanding high process security. What system parts are necessary for a complete setup? A compatible external holder or boring bar, an underlay/clamping set and the correct replacement screws complete the system for secure mounting of the ISO insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBMT 160408 AH725 Wendeplatten - Tungaloy
Take advantage of a PVD-coated carbide grade that combines reliable process security with universal applicability to steel and stainless steel; the rhombic geometry and 0.8 mm corner radius balance strength and finish for consistent turning results. Order genuine Tungaloy tooling via Metav Werkzeuge or contact our technical consultants for tailored recommendations. VBMT 160408 AH725 – ISO turning insert for external and internal turning by Tungaloy The VBMT160408-PSS AH725 is an ISO-standard rhombic turning insert, PVD-coated and optimised for general-purpose machining of steel and stainless steel in applications demanding stable chip control and repeatable results. ISO-standard VBMT 160408 insert PVD-coated AH725 universal grade 0.8 mm corner radius for stability Cylindrical hole with countersink 40°–60° Stable machining across mixed steel grades The combination of the AH725 grade and a PVD-coated surface provides a robust, wear-resistant cutting edge suited for a wide range of steels and stainless steel alloys. This carbide grade is formulated for reliable, breakage-resistant performance, which reduces unexpected tool changeovers and supports continuous production. The result is improved process security and fewer interruptions during turning operations, particularly where workpiece materials vary. Geometry tuned for consistent surface quality A rhombic form with a 35° lead angle and a 0.8 mm corner radius offers a deliberate compromise between edge strength and surface finish. The modest corner radius helps absorb intermittent loads while still permitting a fine surface on external and internal profiles. In practice, this geometry minimises burr formation and maintains dimensional stability, especially when using smaller tooling setups or when tighter tolerances are required. Effective chip control and secure clamping Equipped with the PSS chipbreaker, the insert guides chips into short, manageable segments, reducing risk of entanglement and easing evacuation in confined setups. The insert’s cylindrical hole with single countersink (40°–60°) ensures positive location and repeatable clamping when paired with the appropriate holder, shim and clamp set. Compatibility depends on insert form, clearance angle, tolerance class, mounting arrangement, size and thickness; matching these to the holder achieves the intended clamping rigidity and cutting stability. Practical integration and application guidance The insert is supplied in the ISO VBMT format and forms part of a system that includes a suitable external holder or boring bar, a supporting shim or clamp kit and replacement screws. For external and internal turning applications, select the AH725 grade for mixed-material batches and where high process reliability is a priority. The construction and coating make this insert an economical choice for workshops seeking consistent tool life and reproducible results with a low risk of chipping. For dependable, factory-new Tungaloy inserts and personalised advice on holder compatibility, contact Metav Werkzeuge — Metav Werkzeuge provides procurement support and technical consultation to ensure the correct insert selection for each turning application. Technical Data Article number: 6865488 Manufacturer SKU: TUN6865488 SKU: 6865488-Tungaloy Model series: ISO turning inserts Designation: VBMT160408-PSS AH725 Manufacturer: Tungaloy Facts Corner radius: 0.8 mm Clearance angle: 5° Lead/approach angle: 35° Plate thickness: 4.76 mm Plate size: 16 mm Countersink angle: 40°–60° Special features PVD-coated cemented carbide (AH725) Chipbreaker type: PSS Plate form: rhombic Hole: cylindrical hole with single countersink Application: external and internal turning Designed for steel and stainless steel ISO-standard insert format Suitable for use with matched holder, shim and clamp set FAQ What materials is this insert suitable for? The VBMT160408-PSS AH725 insert is formulated for machining steel and stainless steel, offering robust wear resistance and stable performance across mixed-material batches. How does the PSS chipbreaker affect machining? The PSS chipbreaker on the VBMT160408-PSS AH725 produces short, controllable chips that simplify evacuation and reduce the risk of chip re-cutting or entanglement in turning operations. Which holders are compatible with this ISO insert? Compatibility is defined by the insert form, clearance angle, tolerance class, mounting type, size and thickness; use the ISO VBMT holder types and ensure the clamp/shim matches the VBMT160408-PSS geometry. What surface finish can be expected with a 0.8 mm corner radius? A 0.8 mm corner radius provides improved edge robustness while still enabling a fine surface finish on external and internal profiles, making it a versatile choice for general-purpose turning. Is the product delivered ready for mounting? The insert designation VBMT160408-PSS AH725 represents the ISO-standard cutting plate; for a complete setup, combine it with an appropriate external holder or boring bar, supporting shim/clamp set and replacement screws. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBMT 160408 AH8005 Wendeplatten - Tungaloy
VBMT 160408 AH8005 Drehwendeschneidplatte für Drehen von Tungaloy Die VBMT160408-PS AH8005 ist eine ISO-genormte Drehwendeschneidplatte für Außen- und Innendrehen, entwickelt für stabile Bearbeitung harter Werkstoffe mit verschleißfester PVD-Beschichtung. VBMT160408-PS AH8005 von Tungaloy PVD-beschichtetes Hartmetall für hohe Standzeit PS-Spanbrecher für stabile Spanbildung Rhombische Form 16 mm mit 0,8 mm Eckenradius Zylindrisches Loch mit einseitiger Senkung 40°–60° Hohe Prozesssicherheit und Wirtschaftlichkeit in der Serienfertigung Für produktive Zerspanung zählt vor allem Prozesssicherheit. Die VBMT160408-PS AH8005 kombiniert eine verschleißfeste Sorte mit präziser Geometrie, sodass Schnittkräfte gleichmäßig verteilt werden und die Standzeit steigt. Durch die Kombination aus PVD-beschichtetem Hartmetall und angepasstem Spanformer reduziert sich der Werkzeugwechselbedarf, was Rüstzeiten senkt und die Wirtschaftlichkeit in der Fertigung erhöht. Material und Beschichtung für anspruchsvolle Werkstoffe Die PVD-Beschichtung auf dem Hartmetallkern sorgt für hohe Hitze- und Verschleißfestigkeit bei Bearbeitung von hitzebeständigen Legierungen und harten Werkstoffen. Kunden profitieren von gleichbleibender Oberflächengüte über längere Werkzeugzyklen und von stabiler Spanbildung durch den PS-Spanbrecher. Das Ergebnis ist eine zuverlässige Fertigungsqualität bei geringerer Nacharbeit. Kompatibilität, Einsatz und Einrichtehinweise Die Platte ist ISO-genormt und passt zu standardisierten Außenhaltern oder Bohrstangen, wobei Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke übereinstimmen müssen. Das zylindrische Loch mit einseitiger Senkung (40°–60°) erleichtert die positionssichere Befestigung am Halter. Für optimale Leistung empfiehlt sich die Auswahl des Spanformers und der Sorte passend zum Werkstoff und zur Bearbeitungsstabilität. Zielgruppe und Anwendungsnutzen Die Wendeschneidplatte richtet sich an Fertigungsbetriebe, die wiederholgenaue Ergebnisse und lange Laufzeiten benötigen. Besonders geeignet ist sie für Anwender in der Automobil-, Luftfahrt- und Energiebranche, die hitzebeständige Legierungen bearbeiten. Der Nutzen liegt in reduzierten Stillstandszeiten und konstanter Teilequalität auch bei hohen Zerspanungsanforderungen. Die VBMT160408-PS AH8005 von Tungaloy empfiehlt sich für produktive Serienbearbeitung harter Werkstoffe; bei Fragen zu Verfügbarkeit oder zur Auswahl des passenden Spanformers kontaktieren Sie bitte info@metav-werkzeuge.com oder +49 2822 7131930 Produktmerkmale Artikelnummer: 6775805 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VBMT160408-PS AH8005 Hersteller SKU: TUN6775805 SKU: 6775805-Tungaloy Daten Eckenradius: 0,8 mm Plattendicke: 4,76 mm Plattengröße: 16 mm Winkel: 35° Freiwinkel: 5° Besonderheiten Material: Hartmetall Beschichtung: PVD Sorte: AH8005 — verschleißfest für hitzebeständige Legierungen Spanbrecher: PS — stabiler Spanformer für konstante Spanbildung Plattenform: Rhombisch Loch: mit Loch — zylindrisches Loch + einseitige Senkung (40°–60°) Einsatz: Drehen Schneidstofftyp: PVD-beschichtetes Hartmetall FAQ Wie unterscheidet sich diese Sorte von Standardplatten? Die VBMT160408-PS AH8005 von Tungaloy verwendet eine verschleißfeste Sorte und PVD-Beschichtung, was besonders bei hitzebeständigen Legierungen zu längerer Standzeit und konstanter Oberflächengüte führt. Für welche Werkstoffe ist die Platte geeignet? Die Platte ist ausgelegt für harte Werkstoffe und hitzebeständige Legierungen; die Sorte AH8005 wurde speziell für solche Einsatzfälle entwickelt. Welche Vorteile bietet der PS-Spanbrecher? Der PS-Spanbrecher sorgt für stabile Spanbildung und reduziert Aufbauschneiden, was die Prozesssicherheit und Teilequalität erhöht. Wie stelle ich die Kompatibilität zum Halter sicher? Vergleichen Sie Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke des Halters mit den ISO-Angaben der VBMT160408-PS AH8005; das zylindrische Loch mit Senkung unterstützt die sichere Befestigung. Ist die Platte für Innen- und Außenbearbeitung geeignet? Ja, die VBMT160408-PS AH8005 eignet sich für Außen- und Innendrehen; die Wahl des Spanformers und der Schnittparameter sollte an die spezifische Arbeitsaufgabe angepasst werden. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VBMT 160408 AH8015 Wendeplatten - Tungaloy
VBMT 160408 AH8015 Drehwendeschneidplatte von Tungaloy für Drehen Die VBMT160408-TM AH8015 ist eine ISO-genormte Drehwendeschneidplatte, konzipiert für das Außen- und Innendrehen hitzebeständiger Legierungen und für produktive Zerspanungsprozesse ISO-genormt für einheitliche Werkzeugaufnahme PVD-beschichtetes Hartmetall für Hitzebeständigkeit Eckenradius 0,8 mm für stabile Schneidkante Freiwinkel 5° für universelle Einstellbarkeit Lochausführung mit Senkung 40°–60° für sichere Befestigung Hohe Standzeit durch ausgewogene Sorte und Beschichtung Dank der AH8015-Sorte und der PVD-Beschichtung bietet diese Wendeschneidplatte eine ausgewogene Kombination aus Verschleißfestigkeit und Schneidkantenstabilität. Das sorgt für längere Werkzeugstandzeiten bei der Bearbeitung hitzebeständiger Legierungen und reduziert Werkzeugwechsel sowie Stillstandszeiten. Anwender profitieren konkret von konstanteren Ergebnissen und geringeren Ersatzteilkosten pro Bauteil. ISO-Kompatibilität und sichere Halteraufnahme verbessern Prozesse Die rhombische Plattenform in Verbindung mit der ISO-Norm garantiert eine einfache Integration in bestehende Haltersysteme; die Kompatibilität hängt von Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke ab. Der Freiwinkel 5° und die Lochausführung (zylindrisches Loch + einseitige Senkung 40°–60°) sorgen für präzise und kraftschlüssige Montage. So lässt sich die Platte schnell wechseln und stabil im Prozess einsetzen. Kontrollierte Spanbildung dank Spanformer TM Der integrierte Spanformer TM ist auf stabile Spanformung ausgelegt und unterstützt eine zuverlässige Spanabfuhr bei Außen- und Innendrehen. Das bewirkt weniger Prozessstörungen und eine bessere Oberflächengüte bei konzilstem Vorrat. Anwender ohne tiefe Vorerfahrung erhalten dadurch ein planbares Fertigungsbild und geringere Ausschussraten. Werkstoffkunde: Hartmetall und Einsatzbereiche erklärt Hartmetall als Schneidstoff bietet hohe Härte bei Temperaturbeständigkeit; die PVD-Schicht verbessert zusätzlich die Hitzebeständigkeit und schützt die Schneidkante. Der Eckenradius 0,8 mm stellt einen Kompromiss zwischen Schnittstabilität und Oberflächenqualität dar: kleiner Radius für feineres Finish, größerer Radius für robusteren Einsatz. Dieses Plattensortiment eignet sich insbesondere für Anwendungen in der Luftfahrt, im Maschinenbau und in der Fahrzeugindustrie, wo hitze- und verschleißbeständige Werkstoffe bearbeitet werden. Empfehlung: Für produktive Zerspanung die AH8015-Wendeschneidplatte von Tungaloy wählen und technische Beratung anfordern unter info@metav-werkzeuge.com oder telefonisch +49 2822 7131930 Produktmerkmale Artikelnummer: 6825802 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VBMT160408-TM AH8015 SKU: 6825802-Tungaloy Fakten Eckenradius: 0,8 mm Winkel: 35° Freiwinkel: 5° Plattendicke: 4,76 mm Plattengröße: 16 mm Besonderheiten Schneidstoff: Hartmetall Beschichtung: PVD (verbesserte Hitzebeständigkeit) Sorte: AH8015 (erste Wahl für hitzebeständige Legierungen, ausgewogen) Spanformer: TM (stabile Spanformung beim Drehen) Loch: mit Loch (zylindrisches Loch + einseitige Senkung 40°–60°) Plattenform: rhombisch Systemaufbau: ISO-genormt FAQ Welche Vorteile bietet die AH8015-Sorte? Die AH8015-Sorte kombiniert hohe Verschleißfestigkeit mit stabiler Schneidkante; die VBMT160408-TM AH8015 von Tungaloy eignet sich deshalb besonders für die allgemeine Bearbeitung hitzebeständiger Legierungen und liefert konstante Ergebnisse. Für welche Anwendungen ist diese Platte geeignet? Die Wendeschneidplatte ist ausgelegt für Außen- und Innendrehen; typische Einsatzfelder sind die Bearbeitung hitzebeständiger Legierungen in Luftfahrt, Maschinenbau und Fahrzeugindustrie. Wie beeinflusst der Eckenradius die Bearbeitung? Ein Eckenradius von 0,8 mm erhöht die Schneidkantenstabilität und reduziert Kantenbruchrisiken; das Ergebnis ist ein robuster Prozess mit guter Oberflächengüte. Ist die Platte mit Standard-ISO-Haltern kompatibel? Ja, die Platte ist ISO-genormt; die Kompatibilität richtet sich nach Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke und ermöglicht einfache Integration in gängige Haltersysteme. Was bringt die PVD-Beschichtung in der Praxis? Die PVD-Beschichtung verbessert die Hitzebeständigkeit und vermindert raschen Verschleiß; in Kombination mit Hartmetall ergibt sich eine längere Standzeit und stabilere Schneidkante bei anspruchsvollen Werkstoffen. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VBMT 160408 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide wear resistance, TSF chip control and ISO compatibility for reliable turning performance; order the insert via Metav Werkzeuge or consult the technical advisors for application-specific recommendations. VBMT 160408 AH8015 — ISO turning insert, rhombic 35° by Tungaloy VBMT160408-TSF AH8015 is an ISO-standard rhombic turning insert optimised for general turning and for machining heat‑resistant alloys. PVD-coated carbide grade AH8015 TSF chipbreaker for consistent chips Rhombic 35° geometry for versatile turning Cylindrical hole with 40°–60° countersink Precision and performance for general turning The PVD-coated carbide construction delivers a balanced combination of wear resistance and cutting-edge stability, making the insert well suited to conventional external and internal turning tasks. The rhombic 35° geometry provides a favourable cutting direction for versatile operations while the 0.8 mm corner radius supports robust edge life and moderate finishing capability. This balance reduces the need for frequent index changes and supports steady productivity in batch and continuous production. Stable chip formation and material adaptability Equipped with the TSF chipbreaker, the insert promotes controlled chip formation, which improves surface quality and reduces downtime for chip management. The AH8015 grade is designed as a first choice for machining heat‑resistant alloys, offering an equilibrium between abrasion resistance and edge strength. For less experienced operators, the chipbreaker simplifies process set‑up; for experienced shops, it supports predictable tool life and consistent component quality. System compatibility and economical use As an ISO-standard insert, compatibility with holders is determined by form, clearance angle, tolerance class, fastening method, size and thickness; the recommended system includes a matching rhombic external holder or boring bar, underlay/clamping set and replacement screws. The insert’s cylindrical hole with single‑side countersink (40°–60°) ensures secure clamping and repeatable seating. By combining long life with straightforward mounting, the component contributes to lower handling costs and improved process reliability over multiple production cycles. Contact Metav Werkzeuge for tailored application advice on Tungaloy VBMT turning inserts and to request availability: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: 6825778 SKU: 6825778-Tungaloy Manufacturer SKU: TUN6825778 Designation: VBMT160408-TSF AH8015 Core figures Corner radius: 0.8 mm Included angle: 35° Relief angle: 5° Plate thickness: 4.76 mm Insert size: 16 mm Special features PVD-coated carbide (AH8015) TSF chipbreaker Rhombic plate form Cylindrical hole with single-sided countersink (40°–60°) ISO-standard turning insert for external and internal turning Suitable for machining heat-resistant alloys System components: holder, underlay/clamping set, replacement screws FAQ What materials is this insert intended for? The VBMT160408-TSF AH8015 is a PVD-coated carbide insert optimised for heat‑resistant alloys and general turning applications, providing a balance of wear resistance and edge stability. Which operations are suitable for this insert? This indexable insert is designed for both external and internal turning; the TSF chipbreaker supports stable chip control across varied cutting conditions. How is the insert clamped in the holder? The insert features a cylindrical hole with a single‑side countersink (40°–60°) and requires an appropriate clamping set and fastening screws to ensure secure, repeatable seating. What benefits does the AH8015 grade offer versus other grades? AH8015 offers a balanced performance with improved abrasion resistance and stable cutting edges, making it a practical first choice for demanding alloy machining without sacrificing productivity. Which system components are recommended for use? Use an ISO‑compatible rhombic holder or boring bar matched to the insert form, plus the suggested underlay/clamping set and replacement screws to achieve reliable tool assembly. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBMT 160408 AH8015 Wendeplatten - Tungaloy
VBMT160408-PS AH8015 – ISO-Drehwendeschneidplatte für Drehen | Tungaloy Die VBMT160408-PS AH8015 ist eine ISO-genormte Drehwendeschneidplatte für das Drehen hitzebeständiger Legierungen und bietet eine ausgewogene Kombination aus Verschleißfestigkeit und Schneidkantenstabilität Hohe Verschleißfestigkeit durch PVD-Beschichtung Ausgewogenes Verhältnis von Standzeit und Kante Rhombische Form, 16 mm Größe für vielseitigen Einsatz Mit zylindrischem Loch und einseitiger Senkung für sichere Fixierung Produktivität steigern bei Allgemeiner Zerspanung Die VBMT160408-PS AH8015 wurde für das Außen- und Innendrehen entwickelt und eignet sich besonders für die Bearbeitung hitzebeständiger Legierungen. Durch die PVD-Beschichtung auf dem Hartmetall lässt sich die Standzeit im Vergleich zu unbeschichteten Sorten deutlich erhöhen, was die Rüst- und Stillstandszeiten reduziert. Anwender profitieren von konstanter Leistung bei stabilen Bearbeitungsbedingungen und reproduzierbaren Ergebnissen Material- und Beschichtungsnutzen erklären Der Schneidstofftyp ist PVD-beschichtetes Hartmetall, wodurch die Platte eine gute Balance zwischen Verschleißfestigkeit und Kantenschärfe bietet. Für Betriebe bedeutet das: längere Intervalle zwischen Werkzeugwechseln und bessere Oberflächengüten bei gleichbleibendem Fertigungsfluss. Die Sorte AH8015 ist erste Wahl für anspruchsvolle Legierungen, da sie hitzeresistent bleibt und trotzdem eine belastbare Schneidkante beibehält Passgenauigkeit und Systemkompatibilität Die Kompatibilität zur Werkzeugaufnahme wird durch Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke bestimmt. Die rhombische Platte in 16 mm Größe mit zylindrischem Loch und einseitiger Senkung (40°–60°) sorgt für sichere Montage und einfache Positionierung im Halter. Anwender sollten Halter wählen, die Form, Freiwinkel 5° und Befestigungsart unterstützen, um optimale Schneidbedingungen und stabiles Spanverhalten zu erreichen Zielgruppe und praktische Vorteile in der Fertigung Diese Wendeschneidplatte richtet sich an Fertigungsbetriebe, Lohnzerspaner und Inhouse-Werkstätten, die eine robuste, vielseitige Platte für Serien- und Einzelteilbearbeitung suchen. Der klare Vorteil liegt in der Kombination aus verlässlicher Standzeit und einfacher Ersatzteillogistik dank ISO-Norm: kompatible Außenhalter und Ersatzschrauben sind am Markt breit verfügbar, was die Beschaffungsprozesse vereinfacht Für eine wirtschaftliche und prozesssichere Drehbearbeitung die Qualität von Tungaloy nutzen und bei Fragen technische Details direkt über Metav Werkzeuge anfordern: info@metav-werkzeuge.com | +49 2822 7131930 Produktmerkmale Artikelnummer: 6775806 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VBMT160408-PS AH8015 Hersteller-SKU: TUN6775806 SKU: 6775806-Tungaloy Fakten Plattengröße: 16 mm Plattendicke: 4,76 mm Eckenradius: 0,8 mm Freiwinkel: 5° Winkel: 35° Besonderheiten Material: Hartmetall Beschichtung: PVD (verbesserte Verschleißfestigkeit) Spanbrecher: PS (für kontrollierten Spanfluss) Loch: zylindrisches Loch + einseitige Senkung (40°–60°) Plattenform: rhombisch Einsatz: Drehen, Außen- und Innendrehen FAQ Welche Werkstoffe lassen sich mit dieser Wendeplatte gängig bearbeiten? Die VBMT160408-PS AH8015 von Tungaloy ist für hitzebeständige Legierungen ausgelegt; die PVD-Beschichtung sorgt für gute Verschleißfestigkeit bei solchen Werkstoffen. Ist die Platte mit Standard-Außenhaltern kompatibel? Ja, die ISO-Geometrie der VBMT160408-PS AH8015 und das zylindrische Loch mit Senkung ermöglichen die Montage in gängigen ISO-Außenhaltern, sofern Form, Freiwinkel und Befestigungsart übereinstimmen. Welche Vorteile bietet die Sorte AH8015 gegenüber unbeschichteten Platten? AH8015 kombiniert Verschleißfestigkeit und Kantenschärfe; das Ergebnis ist längere Standzeit und stabilere Bearbeitung im Vergleich zu unbeschichteten Hartmetallsorten. Worauf sollte bei der Auswahl des Spanbrechers geachtet werden? Der Spanbrecher PS der VBMT160408-PS AH8015 ist auf kontrollierten Spanfluss ausgerichtet; für instabile Aufnahmen oder tiefe Schnitte kann eine andere Spanformer-Geometrie vorteilhafter sein. Welche Artikelnummer und SKU gelten für Bestellungen? Für Bestellungen verwenden Sie bitte die Artikelnummer 6775806 und die Hersteller-SKU TUN6775806 für die VBMT160408-PS AH8015 von Tungaloy. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VBMT 160408 AT9530 Wendeplatten - Tungaloy
Take advantage of the combination of a coated cermet grade AT9530, a PS chipbreaker tuned for finishing, and consistent geometry for reliable ISO holder compatibility; this reduces rework and stabilises production. Order the insert directly via Metav Werkzeuge or consult our specialists for selection and inventory planning. VBMT 160408 AT9530 ISO turning insert for turning – PS chipbreaker, 0.8 mm radius (Tungaloy) VBMT160408-PS AT9530 is an ISO turning insert designed for finishing and light turning of Stahl, optimised for high surface quality and uniform wear Coated cermet grade AT9530 0.8 mm corner radius for fine finish PS chipbreaker for finishing cuts ISO rhombic 16 format, cylindrical hole High-quality finish with predictable wear The coated cermet AT9530 is designed for finishing and light machining, delivering a consistently high surface finish and uniform wear behaviour. Its coating and substrate combination reduce microchipping and maintain edge integrity over repeated cycles, which cuts variability in finishing operations and lowers the need for frequent tool changes. The result is a more predictable machining process and fewer downstream quality checks. Seamless integration into ISO turning systems The insert conforms to ISO geometry and the VBMT form, so compatibility with standard turning holders is determined by insert shape, clearance angle and thickness. The cylindrical hole with a single-sided countersink (40°–60°) ensures secure clamping and accurate positioning in many commercial holders. For workshop logistics, this compatibility simplifies tool inventory management and enables rapid retrofitting into existing turning tool systems. Controlled chips and stable light machining Equipped with the PS chipbreaker, this insert promotes short, controllable chips in finishing cuts, improving process security and reducing the risk of surface damage. The 0.8 mm corner radius paired with a 5° clearance angle and a 35° lead/approach angle produces low cutting forces and stable contact conditions, which benefits thin-walled components and precision shafts during external and internal turning. Practical selection guidance for production use Select the PS chipbreaker and the AT9530 grade when the priority is surface quality on Stahl and steady, repeatable tool life. The system concept includes the ISO insert, a matching external holder or boring bar, a shim/clamping set and spare screws for continuous operation. For varied workpiece stability, choose a chipbreaker and feed that balance cutting engagement and machine rigidity to preserve the desired finish with minimal dressing. Contact Metav Werkzeuge for tailored advice on Tungaloy finishing inserts and request the VBMT160408-PS AT9530 to optimise finishing performance in your turning processes Technical data Article number: 6773758 Manufacturer SKU: TUN6773758 SKU: 6773758-Tungaloy ISO designation: VBMT160408-PS Grade: AT9530 Chipbreaker: PS Measurements Corner radius: 0.8 mm Insert size: 16 mm Plate thickness: 4.76 mm Clearance angle: 5° Angle: 35° Features Coated cermet cutting material Rhombic plate form Cylindrical hole + one-sided countersink (40°–60°) Designed for finishing and light turning of Stahl FAQ What applications suit this insert best? The VBMT160408-PS AT9530 is intended for finishing and light turning tasks, especially where a high surface finish on Stahl is required. How does the PS chipbreaker affect machining? The PS chipbreaker on this Tungaloy insert produces short, manageable chips during finishing cuts, improving process reliability and protecting delicate surfaces. Is this insert compatible with standard holders? Yes, the ISO geometry and the cylindrical hole with countersink make the insert compatible with common ISO turning holders when form and thickness match. Which material groups can be machined with this grade? The AT9530 coated cermet is optimised for Stahl; choose a different grade if the primary workpiece material differs significantly from Stahl. What system components are required for installation? A matching external holder or boring bar, an appropriate shim/clamping set and the correct replacement screws are required for proper assembly. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBMT 160408 GT9530 PF Wendeplatten - Tungaloy
Optimise turning performance with the coated cermet Grade GT9530 and a PF chipbreaker for consistent chip control and a superior surface finish. The rhombic ISO insert with a 0.8 mm corner radius and 35° approach angle delivers extended tool life in stable steel turning operations. Order the VBMT160408-PF GT9530 directly via Metav Werkzeuge or consult our specialists for tailored selection support. VBMT160408-PF GT9530 — ISO turning insert, PF chipbreaker, 0.8 mm radius (Tungaloy) The VBMT160408-PF GT9530 is an ISO-standard turning insert crafted for finishing and light general-purpose turning of steel, offering a balance of wear resistance and surface quality in stable machining conditions. Coated cermet grade GT9530 PF chipbreaker for reliable chip control 0.8 mm corner radius for fine finishing Rhombic ISO form with cylindrical hole and countersink Engineered for consistent surface quality and longer tool life The combination of a coated cermet substrate and the GT9530 grade delivers superior wear resistance and an excellent surface finish during finishing operations. Cermet materials merge ceramic and metallic properties to reduce flank wear and maintain a sharp edge at moderate cutting speeds; this means fewer interruptions for tool changes and a more predictable production rhythm. The PF chipbreaker supports stable chip formation, reducing the risk of built-up edge and minimising workpiece damage, which is especially valuable when repeatable part quality is required in batch production. Simple integration into ISO tool systems and assured compatibility As an ISO turning insert, compatibility with toolholders is governed by form, clearance angle, tolerance class, fastening method, size and thickness. The rhombic geometry and the central hole with a cylindrical bore plus a one-sided countersink (40°–60°) enable secure clamping in many standard holders used for external and internal turning. When selecting a holder, match the insert’s ISO designation and the specified 5° clearance to ensure correct seating and repeatable cutting geometry. If unsure, consultation is recommended to verify the best holder-and-insert pairing for the intended machining set-up. Efficient choice for finishing and light universal turning of steel Designed primarily for steel machining, this insert performs best under stable cutting conditions where a good surface finish and longer tool life are priorities. The 0.8 mm corner radius aids in achieving smooth part surfaces and distributes cutting forces to reduce edge chipping, while the 35° approach angle helps control the cutting direction and surface integrity. Overall, the geometry and grade make this insert a cost-effective solution for workshops seeking reliable finishing performance without frequent regrinding or replacement. For tailored advice on selecting the right Tungaloy insert or to confirm suitability of the VBMT160408-PF GT9530 for a specific turning task, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for an application consultation Technical data Article number: 6998386 SKU: 6998386-Tungaloy Manufacturer SKU: TUN6998386 Model series: ISO turning inserts ISO designation: VBMT160408-PF Core specifications Corner radius: 0.8 mm Insert thickness: 4.76 mm Insert size: 16 Clearance angle: 5° Approach angle: 35° Hole style: cylindrical hole + one-sided countersink (40°–60°) Design and functions Coated cermet grade GT9530 PF chipbreaker Rhombic insert form With hole for secure clamping Intended for finishing to light universal turning of steel Compatibility determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suitable for? The VBMT160408-PF GT9530 is a coated cermet insert optimised for machining steel, particularly where a fine surface finish and extended tool life under stable conditions are required. Which turning operations are recommended for this insert? This grade and geometry are designed for external and internal turning, with a focus on finishing and light universal operations rather than heavy roughing. How does the PF chipbreaker influence machining? The PF chipbreaker promotes controlled chip formation and evacuation, improving process stability and reducing the likelihood of built-up edge during finishing passes. What are the key geometric features to consider when choosing a holder? Match the ISO designation, form and the 5° clearance angle; ensure the holder accepts the rhombic form, the 16 size and the 4.76 mm thickness for correct seating and clamping. Will this insert improve surface finish and tool life? Yes, the coated cermet GT9530 combined with a 0.8 mm corner radius is chosen to enhance surface finish and extend tool life in suitable turning applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBMT 160408 GT9530 Wendeplatten - Tungaloy
VBMT160408-PSS GT9530 – ISO-Drehwendeschneidplatten zum Drehen | Tungaloy Die VBMT160408-PSS GT9530 ist eine ISO-genormte Drehwendeschneidplatte für Schlicht- und leichte Universalbearbeitung von Stahl mit Fokus auf Oberflächenqualität und Standzeit. ISO-genormte rhombische Form, 16 mm Kantenlänge Beschichtetes Cermet für verbesserte Oberflächengüte 0,8 mm Eckenradius für feines Schlichten Mit zylindrischem Loch und Senkung 40°–60° Geeignet für Stahl, lange Standzeit bei stabilen Bedingungen Präzise Oberflächen bei Schlichtbearbeitung Die VBMT160408-PSS GT9530 kombiniert beschichtetes Cermet mit einem fein abgestimmten Spanbrecher PSS, um eine gute Oberfläche bei Schlichtanwendungen zu liefern. Der 0,8 mm Eckenradius ermöglicht feine Konturen ohne sichtbare Gratbildung, während die Beschichtung die Verschleißbeständigkeit erhöht. Anwender profitieren von reduzierter Nacharbeit und gleichmäßigem Oberflächenbild bei stabilen Spannbedingungen. Höhere Produktivität durch längere Standzeit Durch die verschleißfeste Sorte GT9530 und den robusten Schneidstoff lässt sich die Standzeit deutlich verlängern, was Werkzeugwechsel reduziert und Maschinenlaufzeiten erhöht. Die Kombination aus Hartmetall-Substrat und Cermet-Beschichtung sorgt für konstante Schneidkantenstabilität und planbare Prozesse. In Lohnfertigung und Serienproduktion führt das zu geringeren Ausfallzeiten und besserer Wirtschaftlichkeit. Einfache Integration in den Werkzeugkreislauf Die Platte ist ISO-genormt, rhombisch ausgeführt und passt zu gängigen Außenhaltern und Bohrstangen, sofern Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke übereinstimmen. Der Freiwinkel von 5° und der Winkel von 35° sind für stabile Schlichtoperationen optimiert. Systembestandteile sind Halter, Unterlage/Klemmsatz und Ersatzschrauben; bei Unsicherheit empfiehlt sich die Prüfung der Halterauflage und der Schraubenlängen. Zielgruppe und Anwendungsempfehlung Entwickelt für CNC-Dreharbeiten in Metallbetrieben, richtet sich die Platte an Anwender, die hohe Oberflächenansprüche bei Stahl haben und stabile Bearbeitungsbedingungen bieten können. Ideal für Schlichtprozesse in Werkstätten, Maschinenbau und Teilefertigung, wo Planbarkeit, Reproduzierbarkeit und reduzierte Nacharbeit entscheidend sind. Empfehlung: Vertrauen Sie auf die Verschleißfestigkeit der VBMT160408-PSS GT9530 von Tungaloy für dauerhaft saubere Oberflächen; bei Fragen erreichen Sie uns per E‑Mail unter info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930. Technische Daten Artikelnummer: 6998394 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VBMT160408-PSS GT9530 Hersteller SKU: TUN6998394 Fakten Radius: 0,8 mm Plattendicke: 4,76 mm Plattengröße: 16 mm Winkel: 35° Freiwinkel: 5° Besonderheiten Material: Hartmetall Schneidstofftyp: beschichtetes Cermet Sorte: GT9530 (verschleißfestes Cermet) Spanbrecher: PSS (feines Schlichten) Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Plattenform: rhombisch Anwendung: Drehen FAQ Für welche Werkstoffe ist die Platte geeignet? Die VBMT160408-PSS GT9530 von Tungaloy eignet sich primär für Stahl; das beschichtete Cermet bietet gute Oberflächengüten und längere Standzeiten bei stabilen Bearbeitungsbedingungen. Welchen Eckenradius hat die Wendeschneidplatte? Die Platte verfügt über einen Eckenradius von 0,8 mm, ideal für feine Schlichtbearbeitung und saubere Kantenausbildung. Wie ist die Befestigung der Platte gestaltet? Die Wendeschneidplatte ist mit Loch versehen; der Lochstil ist zylindrisch mit einseitiger Senkung im Bereich 40°–60°, passend für standardisierte Haltersysteme. Welche Vorteile bietet die Sorte GT9530? GT9530 ist eine verschleißfeste Cermet‑Sorte, die gute Oberflächenqualitäten liefert und unter stabilen Bedingungen längere Standzeiten ermöglicht. Ist die Platte für Hochgeschwindigkeitsanwendungen geeignet? Die Platte ist für Schlicht- und leichte Universalanwendungen konzipiert; für sehr hohe Schnittgeschwindigkeiten sollten Prozessparameter und Werkzeugaufnahme geprüft werden. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VBMT 160408 GT9530 Wendeplatten - Tungaloy
VBMT 160408 GT9530 — ISO-Drehwendeschneidplatten für Drehen (Tungaloy) VBMT160408-PS GT9530 ist eine ISO-genormte Wendeschneidplatte für präzise Schlicht- und leichte Universalbearbeitung beim Drehen Rhombische Form 16 mm für vielseitige Einsatzmöglichkeiten Beschichtetes Cermet GT9530 für hochwertige Oberflächenqualität PS-Spanformer optimiert für Schlicht- und Feinbearbeitung Eckenradius 0,8 mm für feine Konturtreue Mit zylindrischem Loch und einseitiger Senkung Hohe Oberflächenqualität und längere Standzeit für wirtschaftliche Prozesse Die VBMT160408-PS GT9530 verbindet beschichtetes Cermet mit einem auf Schlichtprozesse abgestimmten Spanformer, wodurch bei stabiler Aufspannung sehr gute Oberflächen erzielt und die Standzeit verlängert werden. Diese Kombination reduziert Rüst- und Werkzeugwechselzeiten, was die Produktivität in wiederholgenauen Serien erhöht. Anwender profitieren von weniger Nacharbeit und konstanteren Fertigteilmaßen, insbesondere bei Stahlbearbeitung im Schlichtgang. Einfache Montage, hohe Kompatibilität und sichere Spannverhältnisse Die Platte ist im ISO-Format ausgelegt; Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke bestimmen die Kompatibilität zum Halter. Mit einer Plattendicke von 4,76 mm, einer Plattengröße von 16 mm, einem Freiwinkel von 5° und einer Lochgeometrie (zylindrisches Loch plus einseitige Senkung 40°–60°) sorgt die Geometrie für zuverlässige Klemmkräfte und reproduzierbare Schneidkantenpositionen. Dadurch lässt sich die Platte schnell wechseln und stabil einspannen, was Rüstzeiten minimiert und die Prozessstabilität erhöht. Geeignet für präzise Schlichtungen; Erklärung technischer Grundlagen Cermet ist ein Verbundstoff aus keramischen und metallischen Anteilen, der hohe Härte mit ausreichender Zähigkeit kombiniert. Das beschichtete Cermet GT9530 eignet sich besonders für Schlicht- bis leichte Universalaufgaben an Stahl, wenn Oberflächenqualität und gleichmäßige Spanbildung gefragt sind. Der PS-Spanformer ist auf feine Spanabfuhr und sauberes Schnittbild ausgelegt. Anwender mit stabilen Aufspannungen, z. B. Lohnfertiger und Serienbetriebe, erzielen hier die größten Vorteile. Zielgruppe und Anwendungsfälle Entwickelt wurde die Platte für Anwender, die bei Drehanwendungen Wert auf konstante Fertigungsqualität, geringe Nacharbeit und lange Standzeiten legen. Typische Einsätze sind Außen- und Innendrehen von Stahlbauteilen in der Feinbearbeitung, hochwertige Serienfertigung und Nachbearbeitung von Präzisionsteilen. Die ISO-Norm erleichtert die Auswahl kompatibler Halter und vereinfacht die Beschaffung standardisierter Ersatzteile. Empfehlung: Für hochwertige Schlichtbearbeitung die VBMT160408-PS GT9530 von Tungaloy über Metav Werkzeuge beziehen; bei Fragen technische Beratung per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Technische Daten Artikelnummer: 6998400 Hersteller: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VBMT160408-PS GT9530 SKU Hersteller: TUN6998400 Daten Eckenradius: 0,8 mm Plattendicke: 4,76 mm Plattengröße: 16 mm Winkel: 35° Freiwinkel: 5° Besonderheiten Material: Hartmetall Schneidstofftyp: beschichtetes Cermet Sorte: GT9530 Spanbrecher: PS (für Schlichten) Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Anwendung: Drehen FAQ Welche Werkstoffe lassen sich mit der Platte bearbeiten? Die VBMT160408-PS GT9530 ist konzipiert für die Bearbeitung von Stahl und ähnliche Werkstoffe; das beschichtete Cermet bietet hier gute Oberflächen und Standzeiten bei stabilen Aufspannbedingungen. Für welche Schneidaufgaben ist der PS-Spanformer besonders geeignet? Der PS-Spanformer ist auf Schlicht- und Feinbearbeitung ausgelegt und fördert eine gleichmäßige Spanbildung sowie saubere Schnittbilder. Wie beeinflusst der Eckenradius das Bearbeitungsergebnis? Der Eckenradius von 0,8 mm erlaubt feine Konturtreue und reduziert Schnittkräfte im Schlichtgang, was die Oberflächenqualität verbessert. Welche Vorteile bringt das beschichtete Cermet GT9530 gegenüber unbeschichtetem Hartmetall? Beschichtetes Cermet kombiniert hohe Härte mit verbessertem Verschleißverhalten für bessere Oberflächen und längere Lebensdauer bei definierten Schnittbedingungen. Wie wichtig ist die Kompatibilität zum Halter? Die Kompatibilität ist entscheidend; Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke müssen mit dem Halter übereinstimmen, um sichere Spannverhältnisse und präzise Schnittgeometrie zu gewährleisten. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VBMT 160408 NS9530 PF Wendeplatten - Tungaloy
Take advantage of a sharp cermet cutting edge and low cutting forces for improved surface quality and stable machining results; order the VBMT160408-PF NS9530 ISO turning insert directly via Metav Werkzeuge or request tailored application advice from the consultants. VBMT160408-PF NS9530 — ISO turning insert for finishing, Tungaloy VBMT160408-PF NS9530 is a rhombic ISO turning insert designed for finishing operations on steel, offering a sharp edge geometry and a PF chipbreaker for continuous, fine cuts. Finished-grade cermet for superior surface finish Sharp cutting edge with low cutting forces ISO rhombic shape, 16 mm, 0.8 mm nose radius Cylindrical hole with 40°–60° single-sided countersink High-precision finishing for steel components The grade is an uncoated cermet designated NS9530, optimised for finishing on steel with a pronounced focus on surface quality. Its sharp cutting edge and the PF chipbreaker reduce cutting forces and produce minimal built-up edge, which translates into improved part finish and reduced rework. For operations requiring consistent small depths of cut and continuous cutting, this insert delivers predictable results and helps maintain tight tolerances during serial production. Stable machining and straightforward holder compatibility Manufactured to the ISO profile, the insert’s rhombic geometry and defined parameters — including a 5° clearance angle, 16 mm insert size and 4.76 mm thickness — ensure straightforward compatibility with standard external holders and boring bars. Compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness; selecting a matching holder and clamping set confirms reliable positioning and repeatability. The 0.8 mm nose radius supports fine detail without compromising edge strength. Practical advantages, tool selection and process benefits The combination of cemented carbide construction and the NS9530 finishing grade offers a balance between edge robustness and sharpness, reducing machining forces and enabling smoother feeds. This leads to lower vibration sensitivity and contributes to longer effective tool life under suitable conditions. When choosing inserts, pair the PF chipbreaker and the NS9530 grade with stable setups for turning and light to moderate feeds; this approach yields the best compromise between surface integrity and productivity while minimising downstream finishing work. Contact Metav Werkzeuge for application-specific cutting data, holder compatibility checks and to order the Tungaloy VBMT160408-PF NS9530 insert directly from stock; Metav Werkzeuge offers expert consultation and rapid delivery options. Technical data Article number: 6998574 Manufacturer article number: 6998574 SKU: 6998574-Tungaloy Manufacturer SKU: TUN6998574 Model series: ISO-Drehwendeschneidplatten Facts Insert designation: VBMT160408-PF Size: 16 mm Thickness: 4.76 mm Nose radius: 0.8 mm Clearance angle: 5° Lead/approach angle: 35° Hole: with cylindrical hole + single-sided countersink (40°–60°) Special features Shape: Rhombic Grade: NS9530 Chipbreaker: PF Material: Cemented carbide Coating: uncoated cermet Typical application: Turning (external and internal) System components: ISO insert, matching external holder or boring bar, shim/clamping set, replacement screws Suitable for continuous cuts and small depths of cut FAQ What materials is this insert suitable for? The VBMT160408-PF NS9530 is a finishing cermet insert optimised for steel; the NS9530 grade provides a sharp cutting edge and low cutting forces for improved surface quality on steel components. How does the PF chipbreaker influence cutting behaviour? The PF chipbreaker on the VBMT160408-PF NS9530 promotes controlled chip formation for continuous cuts, lowers cutting forces and supports consistent, fine feeds that enhance surface finish. Which holder features are required for correct fitment? Correct fitment depends on holder form, clearance angle, tolerance class, fastening method, size and thickness; pairing the ISO rhombic insert with a matching external holder or boring bar ensures repeatable positioning for the VBMT160408-PF NS9530. Is this insert suitable for internal turning as well as external turning? Yes, the ISO-profile and geometric data make the insert appropriate for both external and internal turning operations when the toolholder geometry and clamping ensure rigidity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBMT 160408 NS9530 PS Wendeplatten - Tungaloy
Data inconsistency detected: the product lists both an uncoated cermet cutting grade (NS9530) and "Hartmetall" (carbide) as material; please verify the specifications to ensure accuracy, as conflicting information regarding the material composition could lead to misunderstandings or errors in application, potentially affecting performance, durability, or suitability for specific machining tasks; it is crucial to confirm whether the intended material is indeed the uncoated cermet cutting grade NS9530 or the carbide "Hartmetall" to avoid any discrepancies in technical documentation, procurement, or usage, and to maintain consistency across all relevant records, ensuring that the correct material is identified and utilised appropriately.
VBMT 160408 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp cutting edge, uncoated cermet NS9530 and an optimised TSF chipbreaker for consistent finishing results; the geometry and ISO compliance ensure straightforward replacement in existing turning tool systems. Order the insert directly via Metav Werkzeuge or contact our consultants for integration recommendations. VBMT160408-TSF NS9530 – ISO turning insert (finishing), Tungaloy A VBMT160408-TSF NS9530 ISO turning insert optimised for finishing operations on steel, designed for integration into standard ISO turning tool systems. Uncoated cermet for superior surface finish Sharp cutting edge for low cutting forces ISO-compliant form for holder compatibility 0.8 mm corner radius for fine finishing Achieve consistent finishing with low cutting forces The VBMT160408-TSF NS9530 is a finishing-grade insert based on an uncoated cermet matrix that delivers high surface finish while keeping low cutting forces. The combination of a precise geometry and the TSF chipbreaker makes the insert particularly suitable for continuous turning operations where surface quality and dimensional accuracy matter. This design reduces the need for subsequent finishing steps and supports predictable part quality on small depths of cut. Fast integration into ISO turning systems for reliable changeovers Compatibility with existing tooling is governed by the insert form, clearance and lead angles, tolerance class, clamping method, size and thickness. The insert is manufactured to the ISO standard, with a 5° clearance angle, 16 mm size and 4.76 mm thickness, and features a cylindrical hole with a single-sided countersink (40°–60°) for secure fastening. These characteristics allow straightforward replacement in compatible holders and minimise setup time during tool changes. Productivity benefits through process predictability As a finishing grade intended for steel, this insert promotes stable cutting conditions in continuous operations. The sharp cutting edge reduces cutting forces and heat generation, which contributes to predictable tool life and fewer scrap parts. Selection of the TSF chipbreaker and the NS9530 grade supports smooth chip formation and efficient evacuation, helping to maintain cycle times and reduce the frequency of rework on precision components. Practical application notes and handling recommendations The geometry with a 0.8 mm corner radius offers a balance between edge strength and fine surface quality, making the insert well suited for close tolerances and decorative finishes. Confirm holder compatibility before mounting: match the form and tolerances to the insert specification, and ensure correct clamping with the supplied screw or pad system. For interrupted cuts or heavy roughing, choose a different grade or geometry designed for toughness rather than finishing. For tailored advice on using Tungaloy finishing inserts such as the VBMT160408-TSF NS9530 in production workflows, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application-specific recommendations. Technical data Article number: 6945300 Manufacturer SKU: TUN6945300 Label: VBMT160408-TSF NS9530 Core data Corner radius: 0.8 mm Insert size: 16 mm Thickness: 4.76 mm Clearance angle: 5° Lead/insert angle: 35° ISO code: 160408 Special features Uncoated cermet (NS9530) Chipbreaker: TSF Rhombic plate form Cylindrical hole + single-sided countersink (40°–60°) Finishing grade for steel Compatible with ISO turning holders FAQ Which materials is this insert intended for? The VBMT160408-TSF NS9530 is a finishing-grade insert formulated for machining steel; the NS9530 cermet composition is optimised for continuous turning on ferrous materials. What is the purpose of the TSF chipbreaker? The TSF chipbreaker supports controlled chip formation in continuous cuts, improving evacuation and contributing to the stable surface quality delivered by the NS9530 finishing grade. How is holder compatibility determined? Compatibility depends on the insert form, clearance and lead angles, tolerance class, clamping method, size and thickness; the VBMT160408-TSF conforms to ISO dimensions for straightforward integration into matching holders. What does a 0.8 mm corner radius mean for part finish? A 0.8 mm corner radius balances edge strength and surface quality—suitable for fine finishing where reduced burr formation and good edge integrity are required. Is this insert suitable for interrupted cutting or heavy roughing? This insert is designed as a finishing tool for continuous cuts; for interrupted or heavy roughing operations, a tougher grade or different geometry is recommended rather than the NS9530 finishing grade. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBMT 160408 NS9530 Wendeplatten - Tungaloy
Take advantage of a sharp uncoated cermet cutting edge and a compact 0.8 mm corner radius for superior finishing on steel; the ISO‑form insert combines precise geometry and reliable chip control for continuous turning operations. Order or request tailored cutting-data recommendations via Metav Werkzeuge or consult our specialists for application guidance. VBMT160408-TM NS9530 (VBMT 160408) — Turning • Tungaloy VBMT160408-TM NS9530 is an ISO‑type rhombic indexable insert for finishing in turning applications, engineered for low cutting forces and high surface quality. ISO rhombic insert, VBMT form Uncoated cermet grade NS9530 for finishing 0.8 mm corner radius for fine surface results Cylindrical hole with single‑side countersink Optimised finishing performance for steel turning The insert is formulated as an uncoated cermet in grade NS9530, designed specifically for finishing of steel where a sharp cutting edge and low cutting forces matter. That combination reduces the tendency for built‑up edge and supports steady machining at small depths of cut, delivering a consistently improved surface finish. For production environments where repeatability and minimal rework are priorities, the fine edge geometry and material match contribute to predictable part quality and reduced time spent on secondary operations. Precision geometry that supports secure clamping and repeatability The rhombic VBMT geometry with a 35° included angle and a 5° clearance angle provides an effective compromise between cutting stability and accessibility for external and internal turning. The insert’s cylindrical hole with a single‑side countersink (40°–60°) ensures secure clamping and correct seating in compatible toolholders; compatibility is determined by form, clearance angle, tolerance class, fixing method, size and thickness. The 4.76 mm plate thickness and 16 mm size add rigidity in typical finishing setups, helping to maintain tool life under continuous cut conditions. Practical process benefits for workshop productivity With the TM chipbreaker and the cermet’s inherent properties, chip behaviour during finishing becomes more manageable, which in turn supports uninterrupted cycles and lowers the risk of surface damage. The insert is particularly suitable for continuous cuts and small depths of cut, where the emphasis is on achieving high-quality surfaces rather than heavy metal removal. Selecting this insert can reduce tool change frequency and stabilise cycle times, improving overall process economy without sacrificing component quality. Clear advantages for specifying in production Specifying this grade and geometry brings two immediate benefits: a reproducible fine finish on steel components and reduced cutting forces that lower spindle and fixture loads. The ISO standard form simplifies procurement and replacement across machines that accept VBMT‑style inserts, while the uncoated cermet chemistry offers a defined behaviour under finishing conditions. For manufacturers prioritising surface integrity and dimensional consistency, this insert represents a focused solution that supports efficient series production. Contact Metav Werkzeuge for tailored cutting‑data recommendations, application testing and availability of the Tungaloy VBMT160408‑TM NS9530 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 for expert advice and next‑step planning Technical data Article number: 6945317 SKU: 6945317-Tungaloy Manufacturer SKU: TUN6945317 Model series: ISO indexable turning inserts Insert designation: VBMT160408-TM NS9530 Facts Corner radius: 0.8 mm Included angle: 35° Clearance angle: 5° Thickness: 4.76 mm Size: 16 mm Hole: with hole Hole style: cylindrical hole + single‑side countersink (40°–60°) Special features Uncoated cermet grade NS9530 Chipbreaker: TM Rhombic geometry (VBMT) Application: external and internal turning Suited to continuous cuts and small depths of cut Material: carbide FAQ Which materials are best machined with this insert? The VBMT160408‑TM NS9530 is optimised for steel finishing; the uncoated cermet composition delivers a sharp edge and low cutting forces that favour continuous cuts and small depths of cut in steel components. What benefit does the TM chipbreaker provide? The TM chipbreaker on this insert improves chip control during finishing operations, producing short, manageable chips and reducing the risk of surface damage and edge build‑up when using the NS9530 grade. How is holder compatibility determined for this insert? Compatibility depends on the insert form (VBMT), clearance angle (5°), tolerance class, clamping method, size (16 mm) and thickness (4.76 mm); ensure the toolholder matches the VBMT geometry and the cylindrical hole/countersink configuration. How does the 0.8 mm corner radius affect component finish? A 0.8 mm radius balances edge strength with the ability to achieve a fine surface finish; it reduces cutting forces compared with larger radii and is particularly effective for finishing passes with small depths of cut. Is this insert coated? No — the NS9530 grade supplied with this VBMT insert is an uncoated cermet designed for finishing steel where a sharp edge and low cutting forces are required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBMT 160408 NS9530 Wendeplatten - Tungaloy
VBMT160408-24 NS9530 ISO-Drehwendeschneidplatte zum Drehen – Tungaloy Die VBMT160408-24 NS9530 ist eine ISO-genormte Drehwendeschneidplatte für präzise Schlichtbearbeitung beim Drehen mit unbeschichtetem Cermet als Schneidstoff. Präzise Schlichtsorte NS9530 für hohe Oberflächengüte Scharfe Schneidkante reduziert Schnittkräfte ISO-Genormt für einfache Halterkompatibilität Rhombische Form 16 mm für Außen- und Innendrehen Höchste Oberflächengüte bei geringer Schnittbelastung Die Schlichtsorte NS9530 wurde speziell für feinste Oberflächen beim Stahldrehen entwickelt. Durch den unbeschichteten Cermet entsteht eine besonders scharfe Schneidkante, die Schnittkräfte reduziert und so eine konstante Oberfläche liefert. Anwender profitieren von gleichmäßigen Ergebnissen bei kontinuierlichem Schnitt und kleinen Zustellungen, wodurch Nacharbeit und Polieren minimiert werden. Normkonformer Aufbau sorgt für Prozesssicherheit Die Platte erfüllt ISO-Standards und passt zu Haltern, wenn Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke korrekt gewählt werden. Der Freiwinkel von 5° und der Einstellwinkel von 35° unterstützen stabile Spanbildung bei Schlichtoperationen. Durch die rhombische Form und die standardisierte Befestigung mit zylindrischem Loch plus einseitiger Senkung ist ein schneller Werkzeugwechsel und reproduzierbare Spannlage gewährleistet. Zielgruppenorientierter Nutzen für Gewerbe und Werkstatt Die Wendeschneidplatte richtet sich an Fertigungsbetriebe, Werkzeugschleifereien und die Serienbearbeitung, die Wert auf reproduzierbare Oberflächen und Wirtschaftlichkeit legen. Die Kombination aus Hartmetallträger und Cermet-Schneidstoff bietet langlebige Standzeiten bei Feinbearbeitung, wodurch Rüstzeiten und Stillstandsverluste verringert werden. Anwendungshinweise für langlebige Performance Für optimale Ergebnisse empfiehlt sich die Auswahl eines passenden Spanbrechers und die Abstimmung der Schnittdaten auf kontinuierliche Zustellungen. Die Platte ist weniger geeignet für stark unterbrochene Schnitte; bei solchen Anwendungen sollte eine robustere Sorte gewählt werden. Bei Unsicherheit zur Werkzeugauslegung steht technische Beratung zur Verfügung, um Schnittdaten und Halterkombinationen zu optimieren. Für präzise Schlichtbearbeitung empfehlen wir die VBMT160408-24 NS9530 von Tungaloy; Bestellungen und technische Beratung über Metav Werkzeuge: info@metav-werkzeuge.com, +49 2822 7131930. Produktmerkmale Artikelnummer: 6998590 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VBMT160408-24 NS9530 SKU Hersteller: TUN6998590 Fakten Radius: 0.8 mm Winkel: 35° Freiwinkel: 5° Plattendicke: 4,76 mm Plattengröße: 16 mm Spanbrecher: 24 Besonderheiten Material: Hartmetall Schneidstoff: unbeschichtetes Cermet Sorte: NS9530 (Schlichtsorte für Stahl, scharfe Schneidkante, niedrige Schnittkräfte, hohe Oberflächengüte) Plattenform: rhombisch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Eckenradius: 0.8 mm FAQ Welche Werkstoffe eignen sich am besten für diese Wendeschneidplatte? Die Platte ist für Schlichtbearbeitung von Stahl ausgelegt. Die VBMT160408-24 NS9530 von Tungaloy erzielt besonders bei kontinuierlichem Schnitt und geringen Zustellungen sehr gute Oberflächen. Ist diese Platte mit Standard-Außenhaltern kompatibel? Ja, die ISO-Genormung der VBMT160408-24 NS9530 gewährleistet Kompatibilität, sofern Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke des Halters übereinstimmen. Für welche Bearbeitungsaufgaben ist die Sorte NS9530 ideal? Die NS9530-Sorte ist als Schlichtsorte konzipiert und eignet sich für feine Oberflächen, niedrige Schnittkräfte und wiederholgenaue Finish-Ergebnisse bei Drehoperationen. Wie beeinflusst der Eckenradius die Bearbeitungsergebnisse? Ein Radius von 0.8 mm unterstützt glatte Oberflächen und reduziert Kerbwirkungen bei Schlichtschnitten; er ist besonders geeignet für Anwendungen mit kleinen Zustellungen. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com