VBMT 110308 T9225 Wendeplatten - Tungaloy
Benefit from the combination of a CVD‑coated carbide grade and ISO compatibility for consistent medium‑to‑heavy steel turning; the result is reduced tool changes and stable component quality. Order the VBMT110308‑PSS T9225 insert directly via Metav Werkzeuge or ask our consultants if needed. VBMT110308-PSS T9225 — ISO rhombic turning insert for turning, CVD‑coated carbide by Tungaloy VBMT110308-PSS T9225 is an ISO‑standard rhombic indexable insert designed for external and internal turning, offering a robust universal grade for variable cutting conditions. CVD-coated carbide T9225 grade Robust for medium to heavy steel machining Rhombic 35° geometry for versatile turning Cylindrical hole + single-sided countersink (40°–60°) High process reliability through material and coating The combination of a CVD‑coated surface and carbide substrate in the T9225 grade provides high wear resistance while maintaining toughness for interrupted or variable cuts. This chemistry is particularly effective when machining steel, where the coating reduces flank and crater wear, extending life between index changes. The result is measurable consistency in part finish and batch-to-batch reproducibility, supporting lean production and predictable tool replacement intervals. Predictable chip control and stability with PSS geometry The PSS chipbreaker is engineered for controlled chip formation in medium to heavy cuts, limiting entanglement and improving evacuation. With a 35° rhombic outline and a 5° relief angle, the insert balances cutting edge strength and accessibility in confined bores. The 0.8 mm corner radius gives a compromise between edge robustness and acceptable cutting forces, helping to maintain surface quality while reducing the risk of edge chipping under varying engagement conditions. ISO compatibility for fast tool set-up and interchange As an ISO‑genormte insert, the design ensures compatibility with a wide range of external holders and boring bars when matched by form, clearance, tolerance class, clamping and thickness. The central cylindrical hole with a single‑sided countersink (40°–60°) allows standard clamping hardware to be used, accelerating changeovers and simplifying tool inventory management. This modular approach reduces machine downtime and simplifies procurement for workshops that prioritise quick retooling. Practical application advice to optimise performance Select the T9225 grade with the PSS chipbreaker for operations where toughness is needed—such as slightly interrupted cuts or mixed component batches—with a focus on medium to heavy steel applications. For finer finishing passes, consider decreasing feed and using the same insert with adjusted cutting parameters to preserve edge life. The insert integrates into typical ISO insert systems, so toolroom planning can focus on holder geometry and clamping integrity rather than bespoke insert designs. For process-proven turning performance with Tungaloy inserts, contact Metav Werkzeuge for availability and tailored advice — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6781192 Manufacturer SKU: TUN6781192 Metav SKU: 6781192-Tungaloy Designation: VBMT110308-PSS T9225 Measurements Corner radius: 0.8 mm Insert angle: 35° Relief angle: 5° Thickness: 3.18 mm Size: 11 Features & materials Material: carbide (CVD-coated) Chipbreaker: PSS Shape: rhombic Hole: cylindrical hole + single-sided countersink (40°–60°) Application: external and internal turning Grade: T9225 — universal for medium to heavy steel machining FAQ What materials is this insert suited for? The VBMT110308‑PSS T9225 is designed primarily for steel machining in medium to heavy cutting conditions; the T9225 grade provides a balance of toughness and wear resistance. Can this insert be used for internal and external turning? Yes, the rhombic 35° geometry and standard hole/countersink make the insert suitable for both external and internal turning applications when paired with the correct holder. What does the PSS chipbreaker provide in practice? The PSS chipbreaker promotes controlled chip formation and evacuation under varying engagement, reducing chip-related interruptions and improving process stability with the T9225 grade. How should the corner radius be chosen for different operations? The 0.8 mm corner radius on this insert gives improved edge strength for roughing and semi-finishing in heavier cuts while still permitting acceptable surface finish; smaller radii are recommended for fine finishing. Is the VBMT110308-PSS T9225 compatible with standard ISO holders? Yes, the insert conforms to ISO dimensions and is compatible with holders that match form, clearance, tolerance class, clamping and thickness. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBMT 110308 T9225 Wendeplatten - Tungaloy
Take advantage of a robust CVD‑coated carbide grade and a TSF chipbreaker for stable chip control and consistent edge life; the geometry and ISO conformity ensure straightforward integration into ISO toolholder systems. Order the insert directly via Metav Werkzeuge or consult the team for application advice. VBMT 110308 T9225 — ISO turning insert, CVD‑coated carbide, TSF chipbreaker (Tungaloy) A VBMT 110308 T9225 turning insert engineered for medium to heavy steel turning, offering stable cutting under varying engagement and lightly interrupted cuts VBMT 110308 T9225 turning insert (ISO) CVD‑coated carbide universal grade T9225 TSF chipbreaker for stable chip control 0.8 mm corner radius, rhombic 11 mm plate Increased productivity through predictable cutting performance The CVD‑coated carbide grade provides a balance of wear resistance and toughness that is particularly effective in medium to heavy steel turning. The combination of a robust universal grade and the TSF chipbreaker reduces the risk of uncontrolled chip formation, which leads to fewer interruptions and more consistent cycle times. For production environments where cutting conditions vary, this insert supports longer effective tool life and thus contributes to a measurable increase in throughput. Durable geometry for demanding engagement conditions The rhombic geometry with a 0.8 mm corner radius and a 3.18 mm plate thickness offers reliable edge strength when cuts are intermittent or when depth of cut varies. The shorter approach angle of 35° and the 5° relief angle help to distribute cutting forces and to reduce vibration, which in turn enhances surface finish and tool stability. For operators unfamiliar with insert geometry, the corner radius governs the balance between edge strength and surface quality, while the chipbreaker design actively shapes chips to avoid entanglement. Easy integration and clear holder compatibility Designed to the ISO standard (designation 110308), the insert fits into ISO‑conforming carriers where compatibility is determined by form, relief angle, tolerance class, fastening method, size and thickness. The central hole features a cylindrical bore with a single‑side countersink (40°–60°) to match common clamping systems and replacement screws. This standardisation simplifies tool inventory management and makes it straightforward to specify replacements across compatible toolholder families. Application guidance and technical support As a universal choice for steel machining, this insert is best used where a combination of edge robustness and chip control is required — for example, external turning of shafts, facing of medium‑hard components, and operations with light interruptions. If additional process data is required or if the cutting conditions are unusual, Metav Werkzeuge can provide application advice and cutting parameter recommendations. For specific setup questions, the team is available by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930. For application support or to request the Tungaloy VBMT 110308 T9225 insert for standardised turning operations, contact Metav Werkzeuge and discuss suitability for the intended material and machining conditions. Technical data Article number: 6781472 Manufacturer SKU: TUN6781472 Label: VBMT110308-TSF T9225 Model series: ISO‑Drehwendeschneidplatten Facts Plate size: 11 mm Plate thickness: 3.18 mm Corner radius: 0.8 mm Approach angle: 35° Relief (clearance) angle: 5° Special features Material: carbide Coating: CVD‑coated Chipbreaker: TSF Plate form: rhombic Hole: with cylindrical bore and one‑side countersink (40°–60°) Application: turning (medium to heavy steel) FAQ What materials is this insert recommended for? The VBMT110308‑TSF T9225 insert from Tungaloy is a CVD‑coated carbide grade intended primarily for medium to heavy steel turning and for situations with slightly interrupted cuts. How is holder compatibility ensured for this insert? Compatibility follows ISO conventions: the insert’s shape, relief angle, tolerance class, fastening, size and thickness determine fitment into ISO toolholders; the VBMT110308 design matches standard ISO carriers. What are the key geometry specifications to note? Key specifications are: 11 mm plate size, 3.18 mm thickness, 0.8 mm corner radius, 35° approach angle, 5° relief angle, and a central cylindrical hole with a 40°–60° countersink. Manufacturer SKU: TUN6781472. What advantages does the T9225 grade offer compared with other grades? The T9225 grade balances toughness and wear resistance due to its CVD coating, delivering stable cutting edges in variable engagement and improved resistance to chipping under moderate to heavy cutting loads. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBMT 110308 T9225 Wendeplatten - Tungaloy
VBMT110308-PS 110308 T9225 ISO-Drehwendeschneidplatten für Drehen – Tungaloy VBMT110308-PS T9225 bietet robuste Zerspanungslösungen für das Außen- und Innendrehen in der Stahlbearbeitung und ist für wechselnde Eingriffsbedingungen ausgelegt CVD-beschichtetes Hartmetall T9225 für Standzeit und Zähigkeit Passform ISO: rhombisch, 11 mm, 35° Winkel Spanbrecher PS für kontrollierte Spanbildung Mit Loch und einseitiger Senkung für sichere Klemmung Eckenradius 0,8 mm für präzise Konturauflösung Höhere Prozesssicherheit durch Schneidstoff und Beschichtung Die Kombination aus Hartmetall und CVD-Beschichtung sorgt für verbesserte Verschleißfestigkeit bei der mittleren bis schweren Stahlbearbeitung. Die Sorte T9225 wurde speziell für Einsätze mit wechselnden Schnittbedingungen entwickelt und bietet damit eine bessere Zähigkeit bei leicht unterbrochenen Schnitten. Dies reduziert Werkzeugwechsel und steigert die Produktivität. Geometrie, Spanbildung und Anlagenstabilität Die rhombische Plattenform mit 35° Schneidkantenwinkel und einem Eckenradius von 0,8 mm erlaubt präzise Schnittbilder bei gleichzeitig guter Freiflächenführung. Der Spanbrecher PS ist auf kontrollierte Spanbildung ausgelegt und minimiert Schnittkräfte sowie Werkzeugschwingungen, was insbesondere bei stabilitätsbegrenzten Anwendungen zu konstanteren Ergebnissen führt. Systemkompatibilität und wirtschaftlicher Einsatz Als ISO-genormte Wendeplatte ist die Kompatibilität zum Halter über Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke definiert. Einsatz im Verbund mit passenden Außenhaltern, Unterlagen und Klemmsätzen gewährleistet wiederholgenaue Montage. Dies führt zu geringerem Einrichtaufwand und niedrigeren Prozesskosten pro bearbeiteter Einheit. Erklärung relevanter Fachbegriffe kurz und praxisnah CVD steht für Chemical Vapor Deposition und beschreibt eine Dünnschichtbeschichtung, die die Schneidkante gegen Verschleiß schützt und die Standzeit verlängert. ISO-genormt bedeutet, dass Abmessungen und Lochbild standardisiert sind, sodass passende Halter und Schrauben einfach gewählt werden können. Empfehlung: Die Tungaloy VBMT110308-PS T9225 eignet sich besonders für produktive Stahlbearbeitung; Beratung und Bestellservice erhalten Sie direkt bei Metav Werkzeuge – eMail: info@metav-werkzeuge.com • Telefon: +49 2822 7131930 Produktmerkmale Artikelnummer: 6781213 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VBMT110308-PS T9225 Herstellersku: TUN6781213 Fakten Eckenradius: 0,8 mm Winkel: 35° Freiwinkel: 5° Plattendicke: 3,18 mm Plattengröße: 11 mm Besonderheiten Material: Hartmetall Beschichtung: CVD-beschichtet (Dünnschichtaufbau für erhöhte Standzeit) Spanbrecher: PS (für kontrollierte Spanbildung) Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Plattenform: rhombisch Anwendung: Drehen Schneidstofftyp: CVD-beschichtetes Hartmetall FAQ Welche Halter passen zur VBMT110308-PS T9225? Die VBMT110308-PS T9225 passt in ISO-genormte rhombische Außenhalter, wobei Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke übereinstimmen müssen; für exakte Auswahl Halterdaten mit den Plattenmaßen abgleichen. Für welche Werkstoffe ist diese Sorte geeignet? Die Sorte T9225 wurde für die mittlere bis schwere Stahlbearbeitung entwickelt und bietet gute Zähigkeit bei leicht unterbrochenen Schnitten; sie ist eine universelle Wahl für vielfältige Stähle. Was bedeutet die Bezeichnung T9225? T9225 ist die Herstellersorte mit CVD-Beschichtung und abgestimmter Mikrostruktur; sie kombiniert Verschleißfestigkeit mit erhöhter Zähigkeit für produktive Zerspanung. Wofür eignet sich der Spanbrecher PS? Der Spanbrecher PS kontrolliert die Spanform und reduziert Schnittkräfte, wodurch er besonders für Anwendungen mit wechselnden Eingriffsbedingungen und stabilitätsbegrenzten Aufspannungen geeignet ist. Wie wird die Platte korrekt befestigt? Platte auf passende Unterlage legen, mit Klemmsatz und Schraube in der vorgesehenen Senkung zentrieren und nach Herstellerangabe anziehen; die zylindrische Lochform mit einseitiger Senkung unterstützt sichere Montage. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VBMT 160402 AH6225 Wendeplatten - Tungaloy
Taking advantage of a sharp yet stable cutting edge and a PVD-coated carbide grade engineered for stainless steels ensures consistent component finish and extended insert life; combine this with ISO compatibility for fast changeovers. Order the VBMT160402-TM AH6225 directly via Metav Werkzeuge or consult the technical team for application-specific advice. VBMT 160402 AH6225 rhombic turning insert, PVD-coated carbide — Tungaloy VBMT 160402 AH6225 is a rhombic ISO turning insert designed for reliable external and internal turning of stainless steels; the geometry, chipbreaker and coating are optimised for medium machining and variable conditions Universal grade for stainless steels PVD-coated carbide for enhanced wear resistance ISO rhombic insert with 0.2 mm corner radius Centre hole with cylindrical bore and countersink Consistent machining results thanks to grade and coating The combination of the AH6225 grade and PVD-coated surface delivers a balance between sharpness and edge stability that is particularly valuable when machining stainless steel. The applied coating reduces adhesion and wear under variable feeds and interrupted cuts, which in turn supports longer tool life and fewer indexings. For operations that require repeatable surface quality, the controlled edge preparation and stable cutting geometry reduce burr formation and workpiece rework. The explanation of PVD: a thin, dense layer deposited by physical vapour deposition that improves abrasion resistance and adhesion without substantially dulling the cutting edge. Designed geometry and chip control for efficient turning The rhombic form factor with a 0.2 mm corner radius and a 5° clearance angle produces a predictable cutting engagement that suits medium finishing and general-purpose turning. The TM chipbreaker is configured to form short, manageable chips in a range of stainless grades, improving evacuation and reducing load on the toolholder. The centre bore with a cylindrical hole plus a single-sided countersink (40°–60°) ensures secure clamping and repeatable positioning during index changes. ISO standardisation simplifies inventory management and holder compatibility across common toolholder systems. Practical benefits for production and process security Using this PVD-coated carbide insert supports higher process reliability: cutting-edge stability under varying cutting conditions reduces scrap rates and increases throughput. The insert thickness of 4.76 mm and nominal size 16 mm provide stiffness in the assembly to withstand moderate depths of cut without compromising accuracy. For planners and operators, the predictable wear pattern of the grade facilitates maintenance intervals and cost calculations, while the universal focus of the grade minimises the need for multiple specialised inserts in mixed-production environments. Contact Metav Werkzeuge for tailored recommendations on insert selection and holder compatibility — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the VBMT160402-TM AH6225 for specific turning applications Technical data Article number: 6951506 Manufacturer SKU: TUN6951506 SKU: 6951506-Tungaloy Model series: ISO turning inserts Designation: VBMT160402-TM AH6225 Data Corner radius: 0.2 mm Insert size: 16 mm Thickness: 4.76 mm Clearance angle: 5° Wedge/cutting angle: 35° Manufacturer article number: 6951506 Special features Material: carbide Coating: PVD Chipbreaker: TM Plate form: rhombic Hole: cylindrical bore with single-sided countersink (40°–60°) Suitable for stainless steel; intended for turning FAQ What materials is this insert intended for? The VBMT160402-TM AH6225 is formulated primarily for stainless steel machining; its universal AH6225 grade performs well across a broad range of austenitic and other rust-resistant alloys. How does the TM chipbreaker influence machining? The TM chipbreaker on this insert promotes short, controllable chips during turning operations, improving evacuation and reducing the risk of chip-related surface damage with the AH6225 grade. Which toolholders are compatible with this ISO insert? Compatibility depends on holder form, clearance, tolerance class, clamping and insert size; the ISO specification and the rhombic shape allow use with standard VBMT-compatible turning holders. What are the key dimensions to check before assembly? Verify the insert thickness (4.76 mm), insert size (16 mm), corner radius (0.2 mm) and the centre-hole style to ensure correct seating and clamping in the chosen toolholder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBMT 160402 AH6225 Wendeplatten - Tungaloy
Take advantage of a durable, PVD-coated carbide grade that combines a sharp, stable cutting edge with ISO compatibility for reliable turning of stainless steels; the insert’s rhombic geometry and 0.2 mm corner radius balance surface finish and edge strength for medium cutting conditions. Order the VBMT160402-PS AH6225 inserts via Metav Werkzeuge or consult our specialists for application-specific advice. VBMT160402-PS AH6225 — ISO rhombic turning insert, PVD-coated carbide, Tungaloy VBMT160402-PS AH6225 is an ISO-standard rhombic insert designed for external and internal turning, optimised for stainless steels and medium-duty operations ISO-standard rhombic insert PVD-coated AH6225 grade Sharp and stable cutting edge 0.2 mm corner radius, 5° clearance Consistent machining performance for stainless steels The PVD-coated carbide grade AH6225 provides a balanced combination of wear resistance and edge sharpness, tailored for machining stainless steels in variable conditions. The coating stabilises the cutting edge at elevated temperatures, which reduces microchipping and extends tool life; this leads to fewer tool changes and improved process efficiency. For operations where repeatable surface finish and consistent cycle times matter, the combination of a controlled edge geometry and a dedicated coating delivers measurable productivity gains while maintaining part quality. Mounting, compatibility and geometry explained Compatibility with toolholders is governed by form, clearance angle, tolerance class, fastening, size and thickness. The rhombic VBMT outline with an inscribed circle of 16 mm and a plate thickness of 4.76 mm suits a wide range of ISO holders. The insert features a cylindrical hole with a single-sided countersink (40°–60°) for secure clamping and correct seat location. A 5° clearance angle and a 35° wedge geometry ensure predictable cutting forces, while the 0.2 mm corner radius provides a compromise between edge strength for interrupted cuts and the ability to achieve a fine surface finish. These geometric parameters simplify holder selection and process planning in industrial turning setups. Chip control and selection advice for reliable results The PS chipbreaker is matched to the grade and geometry to encourage stable chip formation when turning stainless steels, lowering the risk of built-up edge and improving surface consistency. In practice, select the chipbreaker and cutting parameters according to material condition and machine stability: a more rigid setup permits higher feeds and productivity, whereas less stable conditions favour lighter cuts and conservative parameters to protect the edge. For users seeking repeatable production, pairing the insert with an appropriately rated external holder and following standard coolant or dry-cutting practices will deliver the expected tool life and dimensional stability. Manufacturer grade and geometry choices reduce process variation and support predictable component output. For application guidance, grade comparisons or to source the VBMT160402-PS AH6225 inserts from Tungaloy, contact Metav Werkzeuge for tailored advice and ordering: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6903347 SKU: 6903347-Tungaloy Manufacturer SKU: TUN6903347 Designation: VBMT160402-PS AH6225 Model series: ISO turning inserts Facts Inscribed circle / size: 16 mm Plate thickness: 4.76 mm Corner radius: 0.2 mm Clearance angle: 5° Wedge / angle: 35° Special features Material: carbide Coating: PVD Grade: AH6225 Chipbreaker: PS Plate form: rhombic Hole: cylindrical hole + single-sided countersink (40°–60°) Application: turning (external and internal) FAQ What materials is this insert suited for? The VBMT160402-PS AH6225 insert is designed primarily for stainless steels, with the PVD-coated carbide composition engineered for medium machining and variable conditions. How does the 0.2 mm corner radius affect performance? A 0.2 mm corner radius provides a compromise between edge strength and surface finish: it improves resistance to chipping under intermittent cuts while still enabling good surface quality when using appropriate feeds and speeds. Which chipbreaker should be selected for stainless steels? The PS chipbreaker supplied with this designation is optimised for controlled chip formation in stainless steels; selection may be adjusted depending on workpiece stability and the desired surface finish. Is the insert compatible with standard ISO holders? Compatibility depends on holder form, clearance angle, tolerance class, fastening and size; the insert follows ISO dimensions (VBMT 160402 series) and fits matching ISO-standard external holders. What are the mounting features of the insert? The insert has a cylindrical hole with a single-sided countersink (40°–60°) to ensure secure clamping and correct seating in compatible holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBMT 160402 AH6225 Wendeplatten - Tungaloy
Take advantage of a PVD-coated carbide grade that balances a sharp cutting edge with edge stability for consistent mid-range turning performance; the combination of ISO conformity and a secure, countersunk clamping hole ensures quick integration into existing tool systems. Order genuine Tungaloy inserts via Metav Werkzeuge or consult our technical team for application-specific advice. VBMT 160402 AH6225 VBMT — Turning insert, PVD-coated carbide, Tungaloy VBMT160402-TSF AH6225 is an ISO‑standard rhombic turning insert designed for efficient external and internal turning of stainless steels with a balance of sharpness and edge stability PVD-coated carbide AH6225 Designed for stainless steel turning Rhombic 35° geometry with 0.2 mm radius Cylindrical hole with one-sided countersink Higher throughput with consistent edge performance The PVD-coated carbide grade AH6225 combines wear resistance with a controlled cutting geometry to deliver repeatable performance in mixed‑condition turning operations. Due to its tailored coating and substrate, the insert maintains a sharp cutting edge while resisting premature flank wear, which reduces unplanned tool changes and supports higher process stability. Where cycle time and surface quality matter, this grade is specified to enable steady material removal rates and predictable tool life in turning of stainless steels. Secure clamping and straightforward system integration Built to ISO norms, the insert’s rhombic form with a 35° main angle and a 0.2 mm corner radius ensures compatibility with standard external holder systems; clamping compatibility depends on form, relief angle, tolerance class, fastening method, size and thickness. The cylindrical hole with one-sided countersink (40°–60°) provides firm seating and simplifies index changes, reducing set‑up time. For workshops seeking reliable repeatability, the standardised format makes tool inventory and holder selection straightforward and cost‑efficient. Versatile mid-range grade for varying conditions Intended as a universal choice for machining demanding alloys, this insert suits mid‑level roughing and finishing tasks where variable workpiece conditions require a compromise between sharpness and robustness. The design supports stable chip formation with the TSF chipbreaker, helping to avoid built‑up edge on tough stainless grades and improving surface finish without sacrificing productivity. The VBMT160402-TSF designation indicates the insert geometry and chipbreaker combination optimised for turning, making it a practical option for mixed‑batch production. Contact Metav Werkzeuge for tailored advice on integrating Tungaloy VBMT160402-TSF AH6225 into existing tool systems or to request availability and lead times — eMail: info@metav-werkzeuge.com · Tel: +49 2822 7131930 Technical data Article number: 6951498 SKU (manufacturer): TUN6951498 Supplier SKU: 6951498-Tungaloy Insert designation: VBMT160402-TSF Material: carbide Coating: PVD Grade: AH6225 Facts Corner radius: 0.2 mm Thickness: 4.76 mm Inscribed circle: 16 mm Main angle: 35° Relief angle: 5° ISO code: 160402 Countersink angle: 40°–60° Special features Rhombic plate geometry Cylindrical hole with one-sided countersink TSF chipbreaker Universal grade for stainless steels Sharp yet stable cutting edge ISO‑compliant turning insert system FAQ What materials is this insert suitable for? The AH6225 grade insert is optimised for machining stainless steels; its coating and substrate combination provide a balance of wear resistance and edge sharpness for these alloys. How does the VBMT160402-TSF secure in the holder? The insert features a cylindrical hole with one-sided countersink (40°–60°) to ensure positive seating and repeatable clamping in compatible ISO external holders. What does the TSF chipbreaker provide? The TSF chipbreaker promotes controlled chip formation for improved surface finish and stable cutting when turning variable stainless steel workpieces. Is this insert suitable for finishing operations? Yes — the AH6225 grade offers sufficient sharpness for finishing under stable cutting conditions while retaining robustness for mixed operations. Which SKU identifies this product for ordering? Order using manufacturer article number 6951498 or supplier SKU 6951498-Tungaloy to ensure the correct VBMT160402-TSF AH6225 insert is supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBMT 160402 AH725 Wendeplatten - Tungaloy
Take advantage of a robust combination of PVD-coated carbide and ISO-standard geometry for reliable turning performance across steel and stainless applications; the universal, crack-resistant AH725 grade reduces unexpected edge failure while maintaining good tool life. Request further specification checks or order the insert directly via Metav Werkzeuge or consult their specialists for machining advice. VBMT 160402 AH725 – ISO turning insert, PVD-coated carbide, Tungaloy The VBMT160402-PS AH725 is an ISO-standard rhombic turning insert designed for external and internal turning, providing a universal, chip-resistant carbide grade tailored to steel and stainless applications. ISO rhombic insert VBMT 160402 PVD-coated AH725 for steel and stainless Crack-resistant chipbreaker PS 0.2 mm corner radius for fine finishes Reliable machining where material variety matters The AH725 cutting grade is a PVD-coated carbide developed for universal use with both steel and stainless steel, providing stable chip formation and reliable edge strength under varying conditions. Its balanced coating and substrate combination reduce the risk of premature flank wear and chipping, which translates into fewer unplanned tool changes and more consistent cycle times. For operations that switch between different steels or run smaller-diameter tools, this grade offers high process security without the need for constant parameter shifts. Geometry engineered for dimensional accuracy and surface quality The rhombic ISO geometry and a 0.2 mm corner radius support precise contouring and controlled cutting forces, helping to maintain tolerance bands on turned components. The insert’s 35° cutting angle and 5° relief are selected to balance cutting-edge strength with the capacity to generate fine surface finishes. Where explanations are helpful: a smaller corner radius like 0.2 mm reduces radial cutting engagement, which benefits finishing passes by lowering cutting forces and smoothing irregularities on the workpiece. System compatibility and mounting considerations This insert conforms to ISO dimensions and is supplied with a central hole and a cylindrical hole plus a single-side countersink (40°–60°), ensuring secure clamping in compatible holders and boring bars. When integrating into a tooling system, match the insert’s form, relief angle, tolerance class, and thickness (4.76 mm) with the corresponding external holder or drillable bar to guarantee proper seating and repeatable indexability. Simple checks—correct seat contact, screw torque, and chipbreaker orientation—are sufficient to ensure stable operation. Practical advantages for production workflows Choosing this PVD-coated grade reduces disruptions: its chip-resistant PS chipbreaker aids in breaking and evacuating chips during turning, especially in interrupted cuts or variable feeds. The insert’s universal character reduces the need for multiple grades on the toolboard, which simplifies inventory and setup times. For operators seeking predictable results, the combination of coating, substrate and geometry offers both the economy of fewer tool changes and the reproducibility required in batch production. For machining projects that demand dependable performance from a universal turning insert, contact Metav Werkzeuge for ordering and technical advice — Metav Werkzeuge can confirm holder compatibility and recommend cutting parameters to match the application. Email: info@metav-werkzeuge.com / Phone: +49 2822 7131930 Technical data Article number: 6856688 Manufacturer SKU: TUN6856688 Label/SKU: 6856688-Tungaloy Model series: ISO-Drehwendeschneidplatten Application: Turning Manufacturer article number: 6856688 Core dimensions ISO designation: 160402 Insert designation: VBMT160402-PS Insert size: 16 mm Thickness: 4.76 mm Corner radius: 0.2 mm Relief angle: 5° Cutting angle: 35° Hole: with hole Hole style: cylindrical hole + one-side countersink (40°–60°) Features & materials Material: carbide Coating / grade: AH725 (PVD-coated) Chipbreaker: PS Insert shape: rhombic Typical use: external and internal turning Suitability: steel and stainless steel FAQ What materials is this insert suitable for? The AH725 grade is intended for machining steel and stainless steel, offering stable chip formation and good resistance to edge breakage across those materials. Which insert geometry does the VBMT160402-PS provide? The insert features a rhombic shape with a 0.2 mm corner radius, 5° relief and a 35° cutting angle, optimised for accurate external and internal turning. How does the PS chipbreaker affect machining? The PS chipbreaker promotes controlled chip segmentation, improving evacuation during turning and reducing the risk of built-up edge or entanglement in variable-feed operations. What clamping and holder checks are recommended? Ensure the holder matches the ISO form, thickness and tolerance of the insert, verify correct seating and apply the manufacturer’s recommended screw torque for repeatable indexability. Is coolant required when using this PVD-coated grade? Coolant choice depends on the component and process; AH725 is robust under a range of cutting conditions, but coolant or appropriate cutting fluids can improve thermal control and chip evacuation for demanding operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBMT 160402 AH725 Wendeplatten - Tungaloy
VBMT 160402 AH725 ISO-Drehwendeschneidplatte für Drehen von Tungaloy Die VBMT 160402 AH725 ist eine ISO-genormte, rhombische Drehwendeschneidplatte mit PVD-beschichtetem Hartmetall, entwickelt für prozesssichere Außen- und Innendreharbeiten. Universelle AH725-PVD-Beschichtung für Stahl und rostfreier Stahl Ausbruchfeste Sorte für wechselnde Werkstoffe Rhombische Form 16 mm für vielseitige Einsatzfälle Eckenradius 0,2 mm für feine Konturen Zylindrisches Loch mit einseitiger Senkung für sichere Befestigung Hohe Prozesssicherheit durch optimierte Schneidstofftechnologie Die AH725-Sorte kombiniert eine robuste PVD-Beschichtung mit einem zähen Hartmetall-Träger und sorgt so für stabile Spanbildung und zuverlässige Standzeit. Bei wechselnden Werkstoffen und kleineren Werkzeugen bietet diese Sorte eine besonders hohe Prozesssicherheit, da sie Ausbrüche reduziert und wiederholgenaue Ergebnisse ermöglicht. Das reduziert Nacharbeit und erhöht die Produktivität in Serie. Präzise Konturen dank kleiner Eckenradien und definiertem Freiwinkel Mit einem Eckenradius von 0,2 mm und einem Freiwinkel von 5° eignet sich die Platte für feinere Konturarbeiten und anspruchsvolle Oberflächen. Die Kombination aus kleinem Radius und definierter Geometrie ermöglicht sauberere Konturverläufe bei geringem Werkzeugverschleiß und stabiler Schneidkante, was insbesondere bei präzisen Außen- und Innendrehoperationen Vorteile bringt. Kompatibilität und Einbausicherheit im ISO-System Als Teil der ISO-Drehwendeschneidplatten-Modellserie ist die Platte auf gängige Haltersysteme abgestimmt. Die Kompatibilität hängt von Form, Befestigung, Größe und Dicke ab; durch das zylindrische Loch mit einseitiger Senkung (40°–60°) wird ein sicherer Sitz am Halter gewährleistet. Anwender profitieren von einfacher Handhabung beim Plattenwechsel und reproduzierbarer Positionierung. Anwendungsbereich und Werkstoffabdeckung Die Wendeschneidplatte ist primär ausgelegt für das Drehen von Stahl und rostfreiem Stahl. Die universelle Charakteristik der Sorte AH725 macht sie besonders geeignet für Betriebe mit wechselnden Werkstoffen oder für Anwendungen, die eine hohe Forderung an Zuverlässigkeit stellen. Für spezielle Werkstoffe empfiehlt sich die Abstimmung von Spanbrecher und Schneidstoff auf den Bearbeitungsfall. Einfache Auswahl und wirtschaftlicher Einsatz Durch die ISO-Bezeichnung und die klar dokumentierten Geometrien lässt sich die VBMT-Platte schnell in bestehende Werkzeugsets integrieren. Die ausbruchfeste Sorte reduziert Stillstand und Ausschuss, wodurch sich die Wirtschaftlichkeit pro Bauteil verbessert. Für Anwender, die konstante Teilequalität bei effizientem Werkzeugeinsatz suchen, stellt diese Platte eine praxistaugliche Lösung dar. Empfehlung: Die AH725-Sorte von Tungaloy ist für sichere und wirtschaftliche Drehprozesse besonders zu empfehlen; bei Fragen zur Einbausituation oder zur Wahl des passenden Spanbrechers kontaktieren Sie bitte die technische Beratung von Metav Werkzeuge unter info@metav-werkzeuge.com oder telefonisch +49 2822 7131930. Technische Daten Artikelnummer: 6864891 Marke: Tungaloy Modellserie: ISO-Drehwendeschneidplatten Hersteller SKU: 6864891-Tungaloy Daten Plattengröße: 16 mm Plattendicke: 4,76 mm Eckenradius: 0,2 mm Freiwinkel: 5° Winkel: 35° Besonderheiten Material: Hartmetall Sorte/Beschichtung: AH725 (PVD-beschichtet) Spanbrecher: PSF Plattenform: rhombisch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Anwendung: Drehen FAQ Welche Werkstoffe lassen sich mit der VBMT 160402 AH725 bearbeiten? Die VBMT 160402 AH725 von Tungaloy ist für Stahl und rostfreien Stahl optimiert; die AH725-Sorte bietet universelle Performance bei wechselnden Werkstoffen und sorgt für stabile Spanbildung. Welchen Vorteil bietet die PVD-Beschichtung bei dieser Wendeschneidplatte? Die PVD-Beschichtung erhöht die Verschleißfestigkeit und Stabilität der Schneidkante, was die Standzeit verlängert und konstante Oberflächenqualität bei der Verwendung der VBMT-Platte unterstützt. Worauf muss bei der Halterwahl für diese Platte geachtet werden? Auf Form, Befestigung, Größe und Dicke; die ISO-Bezeichnung und das zylindrische Loch mit einseitiger Senkung erleichtern die Auswahl des passenden Außenhalters oder Bohrstangensystems. Für welche Arten von Drehoperationen eignet sich der Eckenradius 0,2 mm? Der kleine Eckenradius eignet sich für feine Konturen und präzise Profilbearbeitung, wenn saubere Kanten und definierte Oberflächen gefordert sind. Wie beeinflusst der Freiwinkel von 5° die Bearbeitung? Ein definierter Freiwinkel von 5° reduziert Kontaktreibung an der Schneidkante und unterstützt eine konstante Spanabfuhr, besonders bei anspruchsvollen Kontur- und Einsticharbeiten. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VBMT 160402 AH8005 Wendeplatten - Tungaloy
Take advantage of the combination of PVD‑coated AH8005 carbide, a PS chipbreaker for stable cutting, and a compact 0.2 mm corner radius to keep turning operations predictable and productive; order through Metav Werkzeuge or contact our technical consultants for tailored recommendations. VBMT 160402 AH8005 — ISO turning insert for Turning (Tungaloy) The VBMT160402-PS AH8005 is an ISO‑standard rhombic turning insert engineered for external and internal turning of hard and heat‑resistant alloys with a focus on stable, repeatable performance. ISO rhombic turning insert, size 16 PVD-coated carbide grade AH8005 PS chipbreaker for stable cutting 0.2 mm corner radius, 5° clearance Cylindrical hole with 40°–60° countersink Improve process reliability with wear‑resistant PVD coating The use of a PVD‑coated carbide grade like AH8005 delivers significantly improved wear resistance in elevated temperatures, which translates into fewer tool changes and steadier cycle times. In practical terms, the coating reduces flank and crater wear during sustained contact with heat‑resistant alloys; this means a more consistent surface finish and reduced scrap rates. The combination of coating and the PS chipbreaker supports predictable chip formation during medium‑to‑stable cutting conditions, helping to protect spindle bearings and reduce machine interruptions. Extend edge life and reduce unplanned downtime A small 0.2 mm corner radius combined with the robust AH8005 substrate provides a reliable cutting edge that resists chipping under stable clamping conditions. The insert geometry and material pairing are selected to balance edge strength and accessibility, preserving tool life without sacrificing dimensional control. This results in longer uninterrupted production runs and lower overall tooling consumption, supporting measurable cost‑efficiency in batch and serial turning. Fast, secure clamping and straightforward compatibility Manufactured to ISO dimensions, the insert is compatible with holders that match the specified form, clearance, tolerance class, fastening and thickness. The cylindrical hole with a single‑side countersink (40°–60°) ensures secure seating and repeatable positioning when mounted on standard clamping systems. This simplifies tool changeover and reduces set‑up time, especially when retrofitting or standardising toolholders across a turning cell. Geometry tailored to versatile turning tasks The rhombic plate shape and a plate thickness of 4.76 mm give a good balance between rigidity and accessibility in both external and internal turning. The 35° approach angle favours chip flow and surface integrity on long‑chipped materials, while the 5° clearance angle supports stable cutting with appropriate holder geometry. Select the PS chipbreaker and AH8005 grade when machining heat‑resistant alloys or hard workpiece materials to benefit from consistent chip control and edge stability. For expert application advice on Tungaloy AH8005 inserts and to check stock availability, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Manufacturer article number: 6775801 SKU: 6775801-Tungaloy Manufacturer SKU: TUN6775801 Model designation: VBMT160402-PS AH8005 Series: ISO turning indexable inserts Numbers / Core technical data Corner radius: 0.2 mm Plate thickness: 4.76 mm Plate size: 16 mm Clearance angle: 5° Approach/lead angle: 35° Manufacturer article number numeric: 6775801 Special features / Design Carbide substrate, PVD coating Grade AH8005 (wear‑resistant for heat‑resistant alloys) PS chipbreaker for stable chip formation Rhombic plate form Cylindrical hole with one‑side countersink (40°–60°) ISO‑standard insert for turning applications FAQ What materials is this insert suitable for? The VBMT160402-PS AH8005 insert is designed for machining heat‑resistant alloys and harder workpiece materials; the AH8005 grade and PVD coating offer elevated wear resistance for these applications. Which chipbreaker should be selected for finishing operations? For finishing with controlled chip flow, the PS chipbreaker on the VBMT160402-PS insert provides stable chips and a consistent surface finish, especially under steady cutting conditions. How does the 0.2 mm corner radius affect part tolerances? A 0.2 mm corner radius increases edge strength while maintaining good accessibility for smaller radii features; this helps preserve dimensional stability and reduces the risk of corner chipping. Is the insert compatible with standard ISO clamping systems? Yes, the insert is ISO‑dimensioned; compatibility depends on matching holder form, clearance, tolerance class, fastening, size and thickness to the ISO spec. What does the hole style mean for mounting reliability? The cylindrical hole with a one‑side countersink (40°–60°) ensures secure seating and repeatable positioning in compatible clamping systems, aiding fast and reliable tool changes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
VBMT 160402 AH8015 Wendeplatten - Tungaloy
Balanced wear resistance, stable cutting-edge strength and precise geometry deliver consistent turning results; order the VBMT160402-TSF AH8015 insert directly via Metav Werkzeuge or consult our advisors for application support. VBMT160402-TSF AH8015 — ISO turning insert, PVD-coated carbide, 0.2 mm radius by Tungaloy The VBMT160402-TSF AH8015 is an ISO-standard rhombic turning indexable insert designed for external and internal turning operations where a balance of wear resistance and edge stability is required. ISO rhombic insert for turning PVD-coated carbide grade AH8015 0.2 mm corner radius for fine finishes Consistent cutting performance when machining heat-resistant alloys The PVD-coated carbide grade AH8015 combines wear resistance with edge reliability for machining heat-resistant alloys and general engineering steels. The TSF chipbreaker is optimised for controlled chip formation under varying cutting conditions, which reduces the risk of built-up edge and keeps machining stable. By choosing the appropriate chipbreaker and grade for the workpiece and operational stability, the operator benefits from longer tool life and fewer interruptions for insert changes, supporting uninterrupted production. Precision geometry that improves surface finish and repeatability A small 0.2 mm corner radius together with a 35° approach angle and rhombic geometry produces a fine surface quality while maintaining cutting-edge strength. The insert’s 4.76 mm thickness and 16 mm size give adequate mass for stable clamping, and the cylindrical hole with single-sided countersink (40°–60°) ensures reliable fixation and repeatable positioning in the toolholder. These geometric details translate into less rework, predictable tolerances and faster setup times across batch runs. ISO compatibility and practical system integration for workshop efficiency Belonging to the ISO turning insert series, the plate integrates into standard toolholder systems when holder form, relief angle, tolerance class, fastening method, size and thickness match. The typical system comprises the insert, a compatible external holder or boring bar, backing pad/clamping set and spare screws. This modular approach simplifies inventory management and enables quick replacement during shifts. The combination of productive machining and straightforward integration supports economical turning operations and consistent part quality. For reliable, process-secure turning choose the Tungaloy PVD‑coated inserts — contact Metav Werkzeuge for technical advice and availability at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6951499 Manufacturer SKU: TUN6951499 Metav SKU: 6951499-Tungaloy Designation: VBMT160402-TSF AH8015 Facts Insert size: 16 mm Cutting edge radius: 0.2 mm Thickness: 4.76 mm Approach angle: 35° Relief angle: 5° Special features PVD-coated carbide grade AH8015 TSF chipbreaker Rhombic insert shape Cylindrical hole + single-sided countersink (40°–60°) ISO-standard turning indexable insert Intended use: external and internal turning FAQ Which materials is this insert suitable for? The VBMT160402-TSF AH8015 insert with grade AH8015 is primarily intended for heat-resistant alloys and general engineering steels, offering a balanced combination of wear resistance and edge stability. What advantage does the AH8015 grade provide? AH8015 is a PVD‑coated carbide grade that balances wear resistance and cutting-edge stability, making it a first choice for general machining of heat-resistant materials. How does the TSF chipbreaker affect machining? The TSF chipbreaker on the insert promotes predictable chip formation, reducing the likelihood of built-up edge and supporting stable cutting conditions during turning operations. What must be considered for holder compatibility? Compatibility is determined by holder form, relief angle, tolerance class, fastening method, size and thickness; the insert integrates into standard ISO holders when these parameters match. What are the key dimensions and fixing details? Key dimensions: 16 mm size, 4.76 mm thickness, 0.2 mm corner radius, 35° approach angle and 5° relief angle; fixing: cylindrical hole with a single-sided countersink (40°–60°). Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBMT 160402 AH8015 Wendeplatten - Tungaloy
Benefit from a balanced combination of wear resistance and edge stability offered by the PVD‑coated carbide grade AH8015, an ISO rhombic 16 mm format with a 0.2 mm corner radius and 35° approach angle for standard turning operations. Order the VBMT160402‑PS AH8015 directly via Metav Werkzeuge or ask our consultants if needed. VBMT160402-PS AH8015 – VBMT ISO turning insert, PVD‑coated carbide, 0.2 mm radius (Tungaloy) The VBMT160402-PS AH8015 is an ISO rhombic turning insert engineered for external and internal turning of heat‑resistant alloys with reliable chip control and consistent edge life. ISO rhombic insert, 16 mm size PVD‑coated carbide grade AH8015 0.2 mm corner radius for versatile finishing Cylindrical hole with 40°–60° countersink High productivity through balanced grade and coating The VBMT160402‑PS AH8015 combines a PVD‑coated surface with a wear‑resistant carbide substrate to provide a dependable balance between edge stability and abrasion resistance. For the general machining of heat‑resistant alloys, this balance reduces unplanned tool changes and supports longer production runs. The PS chipbreaker is designed to assist with controlled chip formation during both roughing and finishing, which contributes to a steadier process and more predictable cycle times. Secure mounting and ISO compatibility for simple integration The insert is supplied in the ISO‑standard VBMT geometry (16 mm) with a 35° approach angle and a 5° clearance angle, making it compatible with most standard turning toolholders when form, clearance, tolerance class, fastening, size and thickness match. The plate thickness of 4.76 mm and the cylindrical hole with single‑side countersink (40°–60°) ensure secure clamping and repeatable positioning. Compatibility is determined by geometry and tolerance rather than brand alone, so this indexable insert integrates well into established tool systems. Improved surface finish and process stability with the right geometry A 0.2 mm corner radius provides a good compromise between robustness and surface quality, enabling fine finishing passes without excessive cutting forces. The PS chipbreaker supports short, segmented chips on many alloyed materials, reducing the risk of entanglement and improving surface integrity. Selecting the appropriate chipbreaker and the AH8015 grade for the material and machining stability is essential to achieve consistent results and minimise scrap rates. Efficient choice for industry workflows and straightforward selection As a member of the ISO turning insert family, this item is intended for straightforward, repeatable applications in turning. Its PVD layer improves resistance to high temperatures and built‑up edge formation during interrupted cuts or elevated cutting speeds. When process stability and predictable tool life are priorities, this insert offers an economical route to fewer tool changes and simpler planning. For technical queries or confirmation of suitability for specific alloys and setups, our application specialists can provide tailored advice. Contact Metav Werkzeuge for supply and machining recommendations for this Tungaloy turning insert; email info@metav-werkzeuge.com or call +49 2822 7131930 for consultant support Technical data Article number: 6775802 Manufacturer SKU: TUN6775802 SKU: 6775802-Tungaloy Label: VBMT160402-PS AH8015 Model series: ISO turning indexable inserts Application: turning Core data Corner radius: 0.2 mm Approach angle: 35° Clearance angle: 5° Plate thickness: 4.76 mm Plate size: 16 mm Design & features Grade: AH8015 Coating: PVD Substrate: carbide Chipbreaker: PS Hole: with hole Hole style: cylindrical hole + single-sided countersink (40°–60°) Geometry: rhombic Typical use: external and internal turning Compatibility criteria: form, clearance angle, tolerance class, fastening, size, thickness FAQ What materials is this insert best suited for? The VBMT160402‑PS AH8015 is specified for the general machining of heat‑resistant alloys; the AH8015 grade and PVD coating deliver balanced wear resistance and cutting‑edge stability for these materials. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO VBMT geometry (16 mm) and is compatible with standard turning toolholders when form, clearance angle, tolerance class, fastening, size and thickness correspond to the holder design. Which chipbreaker should be selected for finishing passes? The PS chipbreaker on this insert is suited to achieve controllable chips in finishing operations; matching the chipbreaker and grade to the workpiece and stability of the setup improves surface finish and process reliability. Does the insert require special clamping or screws? The insert uses a cylindrical hole with a single‑side countersink (40°–60°); secure and repeatable clamping is achieved when the holder and fastening elements match the geometry and tolerance class. How does the PVD coating affect performance? The PVD‑coating increases resistance to thermal and adhesive wear, reducing built‑up edge formation and extending usable tool life under higher cutting speeds and temperatures. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
VBMT 160402 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated cemented carbide and a 0.2 mm corner radius for consistent surface quality and tool life in turning operations; the ISO rhombic geometry and 35° lead angle deliver predictable chip flow and stability. Order the inserts directly via Metav Werkzeuge or consult the technical team for tailored recommendations. VBMT 160402 AH8015 — ISO turning insert (rhombic) by Tungaloy The VBMT160402-TM AH8015 is an ISO rhombic indexable insert designed for external and internal turning of heat‑resistant alloys, offering balanced wear resistance and edge stability for productive machining. PVD-coated cemented carbide grade AH8015 Optimised for heat‑resistant alloys Rhombic ISO shape with 35° lead angle 0.2 mm corner radius for fine surface finish High‑performance turning for demanding alloys The combination of a PVD-coated surface and a robust cemented carbide substrate gives the insert a balanced performance profile: elevated wear resistance while maintaining edge stability under interrupted or continuous cuts. This balance reduces dressing and tool changes, supporting a steady production flow with predictable tool life. The rhombic geometry with a 35° lead angle contributes to steady cutting forces, so the machining process remains efficient when confronting tougher, heat‑resistant materials. Why the coating and grade matter for longer runs A physical vapour deposition layer improves thermal and adhesive resistance at the cutting edge, reducing built‑up edge and flank wear during high‑temperature contact with workpieces. The AH8015 grade is formulated as a general choice for heat‑resistant alloys, providing a compromise between toughness and hardness that helps avoid premature chipping while preserving flank life. For operations that require consistent surface quality, the coating and substrate combination limits variation across cycles and supports repeatable results. Compatibility and system considerations for safe mounting Compatibility with toolholders is determined by insert form, clearance angle 5°, tolerance class, fastening, size and thickness. The insert is delivered in ISO rhombic form with a cylindrical hole and one‑sided countersink (40°–60°); matching shims, clamps and screws must be selected to meet these features. Using the correct holder and clamping set ensures optimal seating, correct rake and clearance alignment, and predictable heat dissipation — all of which preserve the cutting edge and contribute to process reliability. Application guidance and selection tips For external and internal turning of heat‑resistant alloys, the integrated TM chipbreaker offers controlled chip formation under a range of feeds and depths of cut, improving evacuations and machine uptime. The 0.2 mm corner radius supports a finer surface finish and is suitable for finishing to medium finishing passes, while larger radii are preferable for heavy roughing. Select the chipbreaker and cutting parameters in accordance with component stability and machine rigidity to maximise the economical performance of the insert. For technical advice or to secure VBMT160402-TM AH8015 inserts by Tungaloy, contact Metav Werkzeuge for availability and personalised machining recommendations at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Manufacturer article number: 6951507 SKU: 6951507-Tungaloy Manufacturer SKU: TUN6951507 Designation: VBMT160402-TM AH8015 Series: ISO turning indexable inserts Application: Turning Material: cemented carbide Facts Corner radius: 0.2 mm Plate thickness: 4.76 mm Plate size: 16 mm Lead angle: 35° Clearance angle: 5° Special features PVD-coated grade AH8015 Chipbreaker: TM Rhombic plate form With cylindrical hole + one-sided countersink (40°–60°) ISO-standard insert Optimised for heat‑resistant alloys FAQ What materials is this insert suitable for? The VBMT160402-TM AH8015 insert is optimised for machining heat‑resistant alloys; the AH8015 grade provides a balance of wear resistance and edge strength for such materials. Which chipbreaker is fitted and what is its benefit? The insert features the TM chipbreaker, designed to promote reliable chip control and evacuation during a broad range of turning operations. How does the 0.2 mm corner radius affect the finish? A 0.2 mm corner radius supports a finer surface finish and is best used for finishing or light to moderate cuts where improved surface integrity is required. What holder and clamping considerations apply? Compatibility depends on form, clearance angle (5°), tolerance class, fastening, size and thickness; matching the insert to a compatible ISO rhombic holder, shim and screw set ensures correct seating and stability. Is the insert suitable for internal turning as well as external turning? Yes, the ISO rhombic design and TM chipbreaker allow the insert to be used for both external and internal turning, provided the holder and machining parameters are chosen appropriately. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
VBMT 160402 AT9530 Wendeplatten - Tungaloy
VBMT 160402 AT9530 Drehwendeschneidplatte zum Drehen von Stahl — Tungaloy Die VBMT 160402 AT9530 ist eine ISO-genormte Drehwendeschneidplatte für präzises Schlicht- und Leichtdrehen von Stahl mit Fokus auf Oberflächengüte und gleichmäßigem Verschleiß. Hohe Oberflächengüte bei Schlichtbearbeitung Beschichtetes Cermet für gleichmäßigen Verschleiß Rhombische Form 16 mm, 35° Winkellage Zylindrisches Loch mit einseitiger Senkung 40°–60° Eckenradius 0,2 mm für feine Schnittkante Präzision und Materialvorteil für bessere Oberflächen Die Kombination aus Hartmetall Träger und beschichtetem Cermet Schneidstoff sorgt für stabile Schneidkanten und gleichmäßigen Verschleiß. Durch die feine Schneidstoffauslegung wird eine verbesserte Oberflächengüte erreicht, was Nachbearbeitungsaufwand reduziert. Anwender profitieren besonders beim Schlichtdrehen von Stahl, weil die Platte konstante Ergebnisse bei gleichbleibender Standzeit liefert. Geometrie und Spanformer steigern Prozesssicherheit Die rhombische Plattenform mit Winkel 35° und einem Freiwinkel 5° ermöglicht sichere Spanbildung und einfache Spannpositionierung im Außen- und Innendrehen. Der Spanbrecher PS ist speziell auf feine Spanform und stabile Abfuhr abgestimmt, wodurch Ausschuss reduziert und Werkzeugwechselintervalle verlängert werden. Die zylindrische Lochkonstruktion mit einseitiger Senkung gewährleistet zuverlässige Befestigung und Wiederholgenauigkeit. Einsatzbereiche und Zielgruppe Entwickelt für das Schlicht- und Leichtdrehen, eignet sich die Platte besonders für Anwender in Lohnfertigung und Serienproduktion, die Wert auf konstante Oberflächen und niedrigen Nacharbeitsaufwand legen. Werkstätten, Maschinenbau und Präzisionsfertiger profitieren von der breiten Einsetzbarkeit beim Drehen von Stahl sowie von der einfachen Integration in gängige ISO-Haltersysteme. Wirtschaftlichkeit durch konstante Leistung Mit einem Eckenradius 0,2 mm und der präzisen Plattendicke von 4,76 mm bietet die Platte eine langlebige Schneidkante, die Standzeit und Zerspanleistung balanciert. Durch gleichmäßigen Verschleiß und die optimierte Spanformierung sinken Ausfallzeiten und Werkzeugkosten pro Bauteil, was die Produktivität im Fertigungsprozess erhöht. Für präzise Schlichtbearbeitung empfehlen wir die Verwendung der VBMT-Platte von Tungaloy; bei technischen Fragen erreichen Sie uns per eMail: info@metav-werkzeuge.com oder Telefon: +49 2822 7131930 Produktmerkmale Artikelnummer: 6773757 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Fakten Winkel: 35° Eckenradius: 0,2 mm Plattendicke: 4,76 mm Plattengröße: 16 mm Freiwinkel: 5° Besonderheiten Material: Hartmetall Schneidstofftyp: beschichtetes Cermet Sorte: AT9530 Spanbrecher: PS Plattenform: rhombisch Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) ISO-Bezeichnung: VBMT160402-PS FAQ Wie unterscheidet sich diese Platte von unbeschichteten Platten? Die VBMT 160402 AT9530 kombiniert einen Hartmetallträger mit einem beschichteten Cermet-Schneidstoff, was zu gleichmäßigem Verschleiß und verbesserter Oberflächengüte führt; unbeschichtete Platten bieten dagegen oft geringere Standzeiten bei feinen Schlichtoperationen. Für welche Bearbeitungsaufgaben ist die Platte am besten geeignet? Die Platte ist ausgelegt für Schlicht- und Leichtdrehen von Stahl; der Spanbrecher PS und die feine Geometrie unterstützen saubere Spanabfuhr und hohe Oberflächengüte. Welche Vorteile bietet der Eckenradius 0,2 mm? Der Eckenradius 0,2 mm erzeugt eine feine Schnittkante, reduziert Gratbildung und verbessert die Maßhaltigkeit bei empfindlichen Konturen. Welche Bohrbildausführung hat die Platte und warum ist das relevant? Die Platte verfügt über ein zylindrisches Loch mit einseitiger Senkung (40°–60°), das eine sichere Befestigung und genaue Wiederholpositionierung im Halter gewährleistet. Ist die Platte mit gängigen ISO-Haltern kompatibel? Ja, die VBMT160402-PS ist ISO-genormt; die Kompatibilität hängt von Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke im jeweiligen Haltersystem ab. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VBMT 160402 GT9530 Wendeplatten - Tungaloy
The combination of a coated cermet grade and ISO-compatible geometry delivers precise finishing and extended tool life while maintaining process stability; order directly through Metav Werkzeuge or consult our specialists for application advice. VBMT 160402 GT9530 – Turning insert (coated cermet, 35° geometry) by Tungaloy VBMT160402-PS GT9530 is a rhombic ISO turning insert designed for finishing and light universal turning of steel, offering a coated cermet grade for improved surface quality and tool life Coated cermet grade GT9530 for long life Optimised for finishing and light turning 35° rhombic geometry with 0.2 mm corner radius Cylindrical hole plus single-sided countersink Improved finishing performance with longer tool life The coated cermet formulation delivers a balance between hardness and toughness that is particularly effective for finishing operations on steel. The GT9530 grade is engineered for extended tool life, reducing the frequency of index changes and supporting consistent batch quality. In practice, this means a smoother surface finish and fewer secondary operations; the insert’s wear resistance helps sustain dimensional accuracy over longer runs. The combination of a precise edge preparation and a stable substrate assists shops in reducing overall machining costs while maintaining required tolerances. Reliable ISO fit and secure clamping for process repeatability Designed to the ISO code 160402, the insert ensures compatibility with standard holders where form, relief, tolerance class, fastening method, size and thickness are matched. The ISO-standard form simplifies tool inventory and changeover. The rhombic plate with a 35° geometry and a 0.2 mm corner radius gives reliable engagement during external and internal turning. The cylindrical hole with a single-sided countersink (40°–60°) secures the insert in the clamp assembly, improving repeatability and reducing risk of movement under stable cutting conditions. Practical benefits for stable cutting and predictable results Using a chipbreaker suited to the material and operation is key; the PS chipbreaker on this grade supports controlled chip formation under stable setups, contributing to stable cutting and predictable cycle times. The plate thickness of 4.76 mm and the rhombic shape provide constructive support during cutting, which reduces vibration and improves surface integrity. For operations where good surface finish and longer insert life are required, the combination of geometry, grade and chip control reduces rework and increases productivity. Contact Metav Werkzeuge for expert application guidance on Tungaloy GT9530 inserts and secure supply; our team can advise on the best holder and chipbreaker combinations and arrange delivery via Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6998398 Manufacturer SKU: TUN6998398 SKU: 6998398-Tungaloy Model series: ISO turning inserts Item designation: VBMT160402-PS GT9530 Facts Size: 16 mm Thickness: 4.76 mm Corner radius: 0.2 mm Relief angle: 5° Lead angle: 35° Special features Grade/coating: GT9530 (coated cermet) Chipbreaker: PS Plate shape: rhombic Hole: with hole Hole style: cylindrical hole + single-sided countersink (40°–60°) Material: cemented carbide Application: Turning; external and internal turning System notes: ISO-standard insert compatible with matching holder, shim and clamp set FAQ What materials is this insert suitable for? The GT9530-coated cermet insert is optimised for machining steel and is designed for finishing and light universal turning in stable conditions. Which chipbreaker is fitted and what is its function? The insert uses the PS chipbreaker, which supports controlled chip formation for improved surface finish and machining stability in finishing applications. How does the 35° geometry affect cutting performance? The 35° rhombic lead angle provides a favourable cutting force direction for finishing; it helps achieve a high-quality surface and consistent dimensional control when paired with a stable setup. How is the insert fixed to the holder? The insert features a cylindrical hole with a single-sided countersink (40°–60°) for secure clamping in standard ISO-compatible holders, ensuring repeatable positioning and reduced movement during cutting. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBMT 160402 NS9530 Wendeplatten - Tungaloy
Taking advantage of a sharp cermet cutting edge and a slim 0.2 mm nose radius, this insert delivers consistently high surface finish and low cutting forces in finishing operations; its ISO VBMT geometry and secure central hole ensure reliable clamping and simple changer compatibility. Order the insert directly via Metav Werkzeuge or consult our specialists for application support. VBMT 160402 NS9530 ISO turning insert for finishing — Tungaloy The VBMT160402-TM NS9530 is an ISO rhombic turning insert optimised for finishing of steel, combining an uncoated cermet grade with a sharp cutting edge for continuous cuts and fine surface quality Uncoated cermet grade NS9530 for finishing Sharp edge geometry for low cutting forces ISO VBMT form with 4.76 mm thickness Cylindrical hole with 40°–60° countersink Precise finishing where low cutting forces and surface quality matter The uncoated cermet grade NS9530 is engineered as a finishing grade for steel, offering a sharp cutting edge that reduces cutting forces and delivers an improved surface condition. In practice, this means fewer vibration-related marks and smaller burr formation during continuous turning operations. The combination of a fine 0.2 mm nose radius and the cermet substrate leads to a stable cutting action at the small depths of cut typically used for finishing, enabling consistent part-to-part reproducibility and longer intervals between tool changes. This performance profile supports higher first-pass quality and reduced rework in precision turning tasks. Secure clamping and straightforward compatibility with ISO toolholders The rhombic plate geometry (VBMT), a central cylindrical hole with a single-sided countersink (40°–60°) and an ISO code of 160402 ensure the insert integrates reliably into standard ISO holders. The specified 4.76 mm thickness and the clearance angle of 5° together define the seating and stability in the pocket, reducing the likelihood of micro-movements under load. Compatibility depends on plate form, clearance angle, tolerance class, fastening method, size and thickness; these parameters simplify selection of a matching clamping set or replacement screw and make the insert suitable for quick index changes on automatic tool changers, supporting efficient shop-floor logistics. Application guidance to extract consistent finishing results Designed primarily for external and internal turning, the insert performs best in continuous cutting with light to moderate feed and small depth of cut, where the NS9530 grade reveals its advantages in surface quality and tool life. Select the TM chipbreaker when a balanced chip formation is required for the chosen steel and machining stability. The body material, cemented carbide, provides the necessary substrate strength while the cermet topography promotes a crisp edge. For practical set-up, ensure the holder offers correct lead and clearance, check the seat for cleanliness, and use appropriate coolant strategy as dictated by the part geometry and material to maintain consistent cutting conditions and repeatable results. For precision finishing in steel, choose the Tungaloy VBMT160402-TM NS9530 and contact Metav Werkzeuge for technical advice or application recommendations at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 6951508 SKU: 6951508-Tungaloy Manufacturer SKU: TUN6951508 Brand: Tungaloy Designation: VBMT160402-TM NS9530 Facts Plate size: 16 mm Thickness: 4.76 mm Nose radius: 0.2 mm Included angle: 35° Clearance angle: 5° Special features Grade: uncoated cermet NS9530 Chipbreaker: TM Plate form: rhombic (VBMT) Hole style: cylindrical hole + single-sided countersink (40°–60°) Material: cemented carbide Application: turning (external and internal) ISO code: 160402 FAQ Which materials is this insert best suited for? The VBMT160402-TM NS9530 is a finishing cermet grade developed primarily for steel machining, where it delivers low cutting forces and superior surface finish during continuous cuts. What is the nose radius and how does it influence the finish? The nose radius is 0.2 mm; this fine radius reduces peak cutting loads and helps achieve a smoother surface profile, particularly in finishing passes on turned components. How is the insert secured in a toolholder? Retention relies on the ISO VBMT form, the central cylindrical hole with a one-sided countersink (40°–60°) and the correct seat geometry; compatibility is determined by form, free angle, tolerance class, fastening, size and thickness. Can this insert be used for internal turning? Yes; the insert is suitable for both external and internal turning operations provided the correct holder and chipbreaker are selected for the workpiece geometry and machining stability. What are the ordering references for this item? Manufacturer article number 6951508, SKU 6951508-Tungaloy and manufacturer SKU TUN6951508 identify the Tungaloy VBMT160402-TM NS9530 insert for procurement and logistics. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBMT 160402 NS9530 Wendeplatten - Tungaloy
VBMT160402-PS 160402 NS9530 – Drehwendeschneidplatte für Drehen von Tungaloy Die VBMT160402-PS NS9530 ist eine ISO-genormte Drehwendeschneidplatte für präzise Schlichtoperationen beim Drehen von Stahl mit unbeschichtetem Cermet als Schneidstoff Rhombische Platte 16 mm für kompakte Einspanntiefe Eckenradius 0,2 mm für feine Oberflächengüte Unbeschichtetes Cermet NS9530 für scharfe Schneidkante Mit Loch: zylindrisches Loch + einseitige Senkung 40°–60° Freiwinkel 5° für niedrige Schnittkräfte Präzision und Materialkompetenz für Schlichtdrehen Die VBMT160402-PS NS9530 basiert auf Hartmetall-Trägern und einem unbeschichteten Cermet-Schneidstoff, der speziell für Schlichtanwendungen an Stahl entwickelt ist. Durch die Kombination aus scharfer Schneidkante und geringem Eckenradius entsteht eine hohe Oberflächengüte, die Nachbearbeitungszeiten reduziert. Anwender profitieren von konstanten Schnittkräften und gleichbleibender Qualität bei kontinuierlichem Schnitt, was insbesondere bei Serienfertigung die Prozessstabilität erhöht. Vielseitigkeit im Einsatz und klare Anwendungsvorteile Für Außen- und Innendrehen bietet diese Platte dank ihrer ISO-Normierung einfache Einsetzbarkeit in gängigen Haltersystemen. Der kleine Eckenradius von 0,2 mm ermöglicht feine Passflächen, während der Freiewinkel von 5° die Reibung am Spanvorderteil minimiert. Wer eine Lösung für scharfe Schlichtschnitte sucht, erhält mit dieser Sorte ein Werkzeug, das niedrige Schnittkräfte mit hoher Wiederholgenauigkeit verbindet und so Ausschuss vermeidet. Montage, Kompatibilität und Handling im Arbeitsalltag Die Kompatibilität richtet sich nach Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke; die rhombische Form und das zylindrische Loch mit einseitiger Senkung erleichtern die präzise Positionierung im Halter. Die Plattendicke von 4,76 mm sorgt für ausreichende Stabilität bei kleinen Zustellungen. Durch den standardisierten Systemaufbau mit ISO-Drehplatte, passendem Außenhalter oder Bohrstange lässt sich die Platte schnell umrüsten und minimiert Rüstzeiten in der Fertigung. Wirtschaftlichkeit und Prozesssicherheit in der Produktion Die Wahl der NS9530-Sorte bedeutet gezielte Wirtschaftlichkeit bei Schlichtoperationen: geringere Nacharbeit, konstante Qualität und zuverlässige Standzeit führen zu messbaren Produktivitätsgewinnen. In Produktionsumgebungen mit Schwerpunkt auf Oberflächengüte und Wiederholgenauigkeit reduziert diese Platte Stillstandszeiten und unterstützt geregelte Fertigungsabläufe. Für Anwender, die Wert auf Prozesssicherheit legen, stellt die Kombination aus Formstabilität und scharfem Schneidstoff eine effiziente Investition dar. Empfehlung: Die VBMT160402-PS NS9530 von Tungaloy eignet sich besonders für scharfe Schlichtbearbeitungen an Stahl und ist direkt über Metav Werkzeuge bestellbar; bei technischen Fragen steht die Metav Werkzeuge Beratung per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 zur Verfügung Produktmerkmale Artikelnummer: 6998586 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VBMT160402-PS Hersteller Artikelnummer: 6998586 SKU: 6998586-Tungaloy Fakten Eckenradius: 0,2 mm Winkel: 35° Freiwinkel: 5° Plattendicke: 4,76 mm Plattengröße: 16 mm ISO-Bezeichnung: 160402 Besonderheiten Material: Hartmetall Schneidstofftyp: unbeschichtetes Cermet Sorte: NS9530 Spanbrecher: PS Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Plattenform: rhombisch Anwendung: Drehen FAQ Was zeichnet die NS9530-Sorte aus? Die Sorte NS9530 ist ein unbeschichtetes Cermet-Schlichtsortiment, das für niedrige Schnittkräfte und sehr gute Oberflächengüte bei Stahlanwendungen optimiert wurde; die Kombination mit der Platte VBMT160402-PS von Tungaloy liefert konstante Schlichtresultate. Ist die Platte für Innen- und Außendrehen geeignet? Ja, die ISO-genormte Form und das zylindrische Loch mit Senkung ermöglichen den Einsatz in passenden Außenhaltern und Bohrstangen, sodass die Platte sowohl für Außen- als auch für Innendrehoperationen genutzt werden kann. Welche Vorteile bietet der Eckenradius 0,2 mm? Der kleine Eckenradius sorgt für feine Oberflächen und präzise Maßhaltigkeit, was besonders bei Schlichtarbeiten die Nachbearbeitung reduziert und die Produktivität erhöht. Wie beeinflusst der Freiwinkel die Schnittkräfte? Der Freiwinkel von 5° reduziert die Reibung am Spanvorderteil und führt zu geringeren Schnittkräften sowie stabiler Spanbildung, wodurch die Standzeit der VBMT160402-PS NS9530 verbessert wird. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VBMT 160402 T9215 Wendeplatten - Tungaloy
The combination of CVD-coated carbide and a 0.2 mm corner radius delivers reliable tool life and precise surface finish for medium steel turning; select the PS chipbreaker and T9215 grade for continuous to lightly interrupted cuts. For application advice and fast delivery, consult Metav Werkzeuge. VBMT 160402 T9215 — VBMT ISO turning insert for medium steel, 35° lead angle, Tungaloy The VBMT160402-PS T9215 is an ISO-standard rhombic indexable insert designed for external and internal turning, offering balanced wear resistance and fracture toughness for productive machining of medium steel. CVD-coated carbide grade T9215 First choice for medium steel machining Rhombic ISO insert VBMT 160402, 5° relief 0.2 mm corner radius, hole + 40°–60° countersink Precision and material advantage for consistent production The CVD-coated carbide substrate in this insert combines a hard outer layer with a tough core, which translates into longer tool life and consistent dimensional results when machining steel. The T9215 grade has been developed as a first choice for medium steel applications; it balances wear resistance with fracture safety to sustain productivity across continuous and lightly interrupted cuts. The combination of coating and substrate reduces flank wear and maintains edge integrity, so change intervals are extended and downtime is reduced. Geometry and chip control increase process reliability With a rhombic geometry and a 35° lead angle, the insert reduces cutting forces and improves surface finish in a wide range of turning operations. The PS chipbreaker is optimised for medium-duty cutting and produces controllable chips that help maintain stable machining conditions. The small 0.2 mm corner radius supports fine finishing passes and accurate profile reproduction. Compatibility with tooling depends on form, 5° clearance, tolerance class, fastening method, size and thickness, so matching the insert with an appropriate external holder or boring bar is essential for process security. System approach and application guidance The insert is supplied as part of an ISO indexable system: insert, suitable external holder or boring bar, shim/clamping set and spare screws. Selection of chipbreaker and grade should be based on workpiece material, cutting strategy and machine–fixture stability. For customers less familiar with CVD-coatings or grade selection, the technical benefits can be summarised: improved wear resistance for longer cycles, fracture resistance for interrupted cuts, and predictable surface quality for downstream processes. Contact Metav Werkzeuge for application advice and availability of the Tungaloy VBMT160402-PS T9215; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6774034 Manufacturer SKU: TUN6774034 SKU: 6774034-Tungaloy Label: VBMT160402-PS T9215 Model series: ISO turning indexable inserts Material: carbide Facts Insert size: 16 mm Thickness: 4.76 mm Corner radius: 0.2 mm Clearance angle: 5° Lead angle: 35° Hole: with hole Special features Grade/coating: T9215, CVD-coated Chipbreaker: PS Plate form: rhombic Hole style: cylindrical hole + single-sided countersink (40°–60°) Typical application: external and internal turning System components: insert, external holder or boring bar, shim/clamping set, spare screws Use recommendation: select chipbreaker and grade to match workpiece material and stability FAQ What materials is this insert suited for? The Tungaloy VBMT160402-PS T9215 is intended primarily for medium steel machining and provides a balance of wear resistance and toughness suitable for continuous to lightly interrupted cuts. How does the PS chipbreaker influence performance? The PS chipbreaker offers controlled chip formation for medium-duty turning, improving process stability and helping to prevent built-up edge and erratic chip flow during machining. What does the T9215 grade provide compared with other grades? Grade T9215 combines a CVD-coated surface with a tough substrate to deliver longer tool life under typical steel-cutting conditions while maintaining fracture resistance for interrupted cuts. Which toolholders are compatible with this insert? Compatibility is determined by insert form, 5° clearance, tolerance class, fastening, size and thickness; the insert works with standard ISO external holders or boring bars suited to VBMT 160402 geometry. Is the 0.2 mm corner radius suitable for finishing? Yes — the 0.2 mm corner radius is well suited to fine finishing passes and accurate profile control while still offering adequate edge strength for many production tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBMT 160402 T9215 Wendeplatten - Tungaloy
High wear resistance, reliable chip control and a compact 0.2 mm corner radius make the VBMT160402-TSF T9215 a productive choice for medium steel turning; the 35° lead angle further improves versatility and surface finish. Order the VBMT160402-TSF T9215 directly via Metav Werkzeuge or ask our consultants if needed. VBMT 160402 T9215 VBMT160402-TSF – ISO turning insert, CVD-coated carbide (Tungaloy) The VBMT160402-TSF T9215 is an ISO-standard indexable turning insert designed for medium steel machining, offering a balanced combination of wear resistance and fracture toughness for continuous to lightly interrupted cuts. CVD-coated carbide grade T9215 for steel 35° lead angle for versatile turning 0.2 mm corner radius for fine profiling Cylindrical hole with 40°–60° countersink Higher throughput through optimised grade and chip control The combination of a CVD-coated substrate and the T9215 grade provides a robust balance between wear resistance and fracture toughness. This makes the insert particularly effective for continuous to lightly interrupted turning of medium steels, where consistent edge life directly translates to fewer tool changes and higher productivity. The TSF chipbreaker is tuned for stable chip formation in steel, reducing the risk of built-up edge and improving process reliability. In practical terms, shops benefit from longer, predictable runtimes and lower downtime for regripping and insert exchanges. Simple integration into ISO tooling systems Designed to the ISO indexable insert standards, compatibility depends on the insert’s form, clearance angle, tolerance class, fastening method, size and thickness. The rhombic plate form and standard hole configuration mean the insert fits a wide range of holders when those parameters match. The 4.76 mm plate thickness and 16 mm size are common in many turning systems, while the cylindrical hole with a single-sided countersink (40°–60°) ensures secure clamping and repeatable seating in the pocket. This predictability simplifies setup and shortens changeover time on production lines. Achieve finer surface quality with a small corner radius A 0.2 mm corner radius enables precise contouring and improved surface finish on delicate profiles without compromising strength. Combined with the 35° lead angle, the geometry reduces cutting forces in many finishing and semi-finishing passes, which can lower vibration and improve dimensional stability. For components where surface integrity and tight tolerances matter, this geometry supports better results with modest cutting parameters. The insert’s material and chipbreaker pairing further aid consistent chip evacuation, contributing to cleaner component surfaces. Practical guidance for selection and use When applying the insert in turning operations, match the TSF chipbreaker and T9215 grade to the workpiece condition and machine stability: favour T9215 for medium steels and continuous cuts, and consider adjustments for heavier interruptions. The recommended system comprises the ISO insert, a compatible external holder or boring bar, an appropriate shim or clamp set, and replacement screws for secure fixation. Regular inspection of seat integrity and correct torque on fastening screws ensures the repeatable performance expected from these indexable inserts, while choosing the right feed and speed settings will optimise tool life and part quality. Contact Metav Werkzeuge for tailored cutting data, delivery availability and application advice on Tungaloy turning inserts via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6951495 Manufacturer article number: 6951495 SKU: 6951495-Tungaloy Manufacturer: Tungaloy Designation: VBMT160402-TSF T9215 Facts Insert size: 16 mm Plate thickness: 4.76 mm Corner radius: 0.2 mm Lead angle: 35° Clearance (relief) angle: 5° Countersink angle: 40°–60° Special features Rhombic plate form TSF chipbreaker CVD-coated carbide grade T9215 Cylindrical hole with single-sided countersink Intended application: turning (Drehen) ISO-standard indexable insert FAQ Which materials is this insert best suited for? The VBMT160402-TSF T9215 is formulated primarily for medium steel machining; the T9215 grade combines wear resistance and toughness for continuous to lightly interrupted cuts. Will the insert fit standard ISO holders? Compatibility is governed by form, clearance angle, tolerance class, fastening, size and thickness; the VBMT160402-TSF follows ISO dimensions and fits holders matching the 16 mm size and 4.76 mm thickness. What advantages does the TSF chipbreaker offer? The TSF chipbreaker promotes stable chip formation in steel turning, helping to prevent built-up edge and improving surface finish while supporting steady material removal rates. How does the 0.2 mm radius influence finish and strength? A 0.2 mm corner radius allows fine contouring and improved surface quality with reduced cutting forces in finishing passes, while maintaining sufficient edge strength for typical turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBMT 160402 T9225 Wendeplatten - Tungaloy
Benefit from the combination of CVD‑coated carbide T9225 and ISO‑conform VBMT geometry for reliable medium‑to‑heavy turning operations; the robust grade and chipbreaker deliver stable edge life even under slightly interrupted cuts. Ensure holder compatibility by matching form, clearance angle and size, and order the insert via Metav Werkzeuge or consult the technical team if further clarification is required. VBMT160402-PS T9225 — ISO turning insert, CVD‑coated carbide, 0.2 mm nose radius (Tungaloy) A VBMT160402-PS T9225 insert for ISO‑standard turning, optimised for medium to heavy steel machining where interrupted cuts demand a tougher, more forgiving grade VBMT160402-PS T9225 ISO turning insert CVD-coated carbide for robust performance 0.2 mm nose radius for precise profiles Cylindrical hole + single-side countersink Consistent tool life for variable cutting conditions The combination of CVD‑coated carbide and the T9225 grade provides a balance of hardness and toughness that is intended for medium to heavy steel machining. The coating enhances resistance to abrasive wear while the substrate maintains edge integrity during fluctuating engagement. This makes the insert particularly suited to operations where cuts are slightly interrupted or where workpiece properties vary: tool life becomes more predictable and tool change frequency is reduced, supporting higher productivity and lower process variance. Stable chip control and secure clamping for shopfloor reliability Integrated PS chipbreaker geometry has been designed to promote reliable chip formation under typical turning feeds, reducing the risk of long, tangled swarf and improving evacuation. The cylindrical hole with a single‑side countersink (40°–60°) contributes to a repeatable and rigid seating in the toolholder; clamping force is concentrated where it is most effective, so cutting forces are transferred consistently and vibrations are minimised. The result is improved process stability and fewer unexpected interruptions during production. Precise contouring and surface quality for finished components A 0.2 mm nose radius supports accurate profile reproduction and helps achieve a good surface finish on turned components, while the 35° approach angle and 5° clearance angle combine to reduce radial cutting forces and prevent premature flank wear. These geometric choices translate into controlled cutting engagement and a balance between strength at the cutting edge and the ability to produce fine external and internal features with repeatable dimensional results. Seamless integration into ISO‑based turning systems As an ISO‑standard insert in VBMT geometry, the component is compatible with a wide range of external holders and boring bars when the form, clearance angle, tolerance class, fastening type, size and thickness are matched correctly. Typical system build comprises the insert, a suitable holder, a shim/clamping set and replacement screws; this modular approach simplifies inventory management and replacement procedures. Specification adherence means predictable mounting and repeatable performance across tool changes and batches. For reliable medium‑to‑heavy turning with Tungaloy’s CVD‑coated grade T9225, contact Metav Werkzeuge for ordering or technical consultation via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6781186 Manufacturer SKU: TUN6781186 Model series: ISO-Drehwendeschneidplatten Designation: VBMT160402-PS T9225 Facts Insert size: 16 mm Thickness: 4.76 mm Nose radius: 0.2 mm Clearance angle: 5° Approach angle: 35° Hole: with hole Hole style: cylindrical hole + single-side countersink (40°–60°) Special features Material: carbide Coating/type: CVD-coated carbide, grade T9225 Chipbreaker: PS Plate form: rhombic Application: turning System components: insert, holder, shim/clamping set, replacement screws FAQ What materials is this insert suited for? The VBMT160402-PS T9225 insert (Tungaloy, insert SKU TUN6781186) is engineered primarily for medium to heavy steel turning, delivering robustness where variable engagement or slight interruptions occur. How does the PS chipbreaker affect machining? The PS chipbreaker on the VBMT160402-PS T9225 encourages short, manageable chips under common feed and depth settings; this improves chip evacuation and reduces the likelihood of swarf-related process stops when turning steel components. Which holder features are required for correct mounting? Correct compatibility is achieved by matching holder form, 5° clearance angle, tolerance class, fastening type, size and thickness; the cylindrical hole with a single‑side countersink aids secure, repeatable clamping in standard ISO VBMT holders. Can the insert produce fine surface finishes on profiles? Yes. The 0.2 mm nose radius together with the 35° approach angle on the VBMT160402-PS T9225 contributes to controlled cutting engagement and improved surface finish on external and internal turned features. Are replacement parts and shims required for system assembly? A complete turning setup for the VBMT160402-PS T9225 typically includes the insert, a suitable external holder or boring bar, a shim/clamping set and replacement screws to ensure correct seating and process stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBMT 160402 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD‑coated carbide grade that balances toughness and wear resistance, a TM chipbreaker optimised for medium to heavy steel turning, and precise ISO compatibility for predictable changeovers. Order the insert directly via Metav Werkzeuge or contact our advisors for application guidance. VBMT 160402 T9225 — ISO rhombic turning insert for medium‑heavy steel, CVD‑coated carbide VBMT160402-TM T9225 is an ISO‑standard rhombic insert made for external and internal turning in steel; the geometry and grade suit interrupted cuts and varying engagement conditions CVD-coated carbide grade T9225 TM chipbreaker for medium-heavy steel Rhombic ISO insert, 35° cutting angle 0.2 mm corner radius, 4.76 mm thickness Predictable performance in medium‑to‑heavy steel machining The CVD‑coated carbide grade T9225 is formulated for robust, universal performance when turning steel under changing engagement conditions. Combined with the TM chipbreaker, the insert offers controlled chip formation and enhanced edge stability, which reduces unexpected downtime and extends tool life. For shops running mixed batches or occasional interrupted cuts, this combination provides a practical balance of toughness and wear resistance that keeps cycle times consistent and regrinding intervals predictable. Clear system compatibility and mounting guidance As an ISO‑standard rhombic insert, VBMT160402-TM T9225 integrates into a standard turning system consisting of the insert, a matching external holder or boring bar, and the required shim/clamping set plus replacement screws. Compatibility depends on form, 5° relief angle, tolerance class, mounting method, size and thickness; the insert features a cylindrical hole with a single‑sided countersink (40°–60°) to suit common clamping designs. Specifying the correct holder geometry and tolerance class ensures repeatable seating and concentricity, which is critical for accurate runout and surface finish. Practical edge geometry for reliable finishing and roughing The insert’s 35° cutting angle and 0.2 mm corner radius are chosen to deliver a compromise between strength and edge definition: the radius supports heavier cuts and interrupted conditions, while the included angle promotes stable engagement and acceptable surface integrity. At 4.76 mm thickness, the insert provides a rigid cutting edge that resists chipping under variable loads. When paired with an appropriate feed and speed strategy, this geometry yields consistent side force distribution and helps to maintain dimensional accuracy across production runs. Ease of selection and application advice Choosing the correct chipbreaker and grade is essential: for heavy interrupted cuts, favour lower cutting speeds and the TM chipbreaker with T9225 to benefit from enhanced toughness; for continuous finishing, optimise feeds to exploit the insert’s wear resistance. The ISO designation and available dimensional data make cross‑referencing with holders straightforward, enabling faster changeovers and fewer trial passes during setup. For any uncertainty on holder fitment or cutting data, technical consultation is available to adapt the insert to a specific machine or workpiece. For tailored application advice, supply options, or to arrange prompt delivery of VBMT160402-TM T9225, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — expert assistance is available to match the insert to the machining task and holder system. Technical data Article number: 6951503 Manufacturer SKU: TUN6951503 SKU: 6951503-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: carbide Grade: T9225 Facts ISO designation: 160402 Size: 16 mm Thickness: 4.76 mm Corner radius: 0.2 mm Relief angle: 5° Cutting angle: 35° Hole: with hole; cylindrical hole + single-sided countersink (40°–60°) Special features CVD coating TM chipbreaker Rhombic plate form Designed for external and internal turning Compatibility determined by form, relief angle, tolerance class, mounting, size and thickness System composition: insert + suitable external holder or boring bar + shim/clamping set + replacement screws FAQ What materials is this insert suitable for? The VBMT160402-TM T9225 insert with CVD‑coated carbide is designed primarily for steel machining and performs well in medium‑to‑heavy turning tasks. Is the insert compatible with standard ISO holders? Yes, the VBMT160402-TM follows ISO geometry; compatibility depends on holder form, relief angle, tolerance class, mounting and plate thickness. What does the TM chipbreaker provide? The TM chipbreaker on this insert improves chip control and edge stability, which is particularly beneficial during interrupted cuts or variable engagement. Which cutting parameters are recommended for roughing and finishing? For roughing, lower speed with higher feed and the T9225 grade increases toughness and resistance to chipping; for finishing, moderate feeds exploit the grade’s wear resistance for better surface quality. How does the 0.2 mm corner radius affect performance? A 0.2 mm corner radius offers a balance between edge strength and surface finish, supporting heavier cuts while still allowing reasonable final surface integrity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBMT 160404 AH120 Wendeplatten - Tungaloy
VBMT 160404 AH120 (Drehen) – Wendeschneidplatte von Tungaloy Die VBMT160404-PS AH120 ist eine ISO-genormte Wendeschneidplatte für präzises Außen- und Innendrehen mit hohem Anspruch an Schneidkantensicherheit und Prozessstabilität. PVD-beschichtetes Hartmetall für lange Standzeit PS-Spanbrecher für stabile Spanbildung Rhombische Form, 35° Winkel für vielseitige Halter Mit Loch und zylindrischer Senkung 40°–60° Kompatibel mit ISO-Drehplattensystemen Hohe Prozesssicherheit durch moderne Schneidstofftechnik Die AH120-Sorte kombiniert ein pvd-beschichtetes Hartmetall mit ausgelegter Bruch- und Verschleißfestigkeit, was die Standzeit unter wechselnden Schnittbedingungen erhöht. Durch die stabile Schneidkante lässt sich die Folgeoperation zuverlässiger planen, was die Produktivität in Serien- und Einzelteilefertigung steigert. Anwender profitieren von gleichbleibender Werkstückqualität und reduziertem Nacharbeitaufwand. Präzise Geometrie und einfache Halterkompatibilität Die rhombische Plattenform mit einem Einstellwinkel von 35° und einem Freiwinkel von 5° gewährleistet gute Zugänglichkeit bei Außen- und Innendrehoperationen. Die Platte ist mit einem zylindrischen Loch und einer einseitigen Senkung (40°–60°) ausgestattet, wodurch die Positionsgenauigkeit im Halter verbessert wird. Diese Kombination erleichtert die Auswahl des passenden Halters und reduziert Rüstzeiten. Leistungsorientierte Spanformung und Schneidkantenverhalten Der PS-Spanbrecher ist auf kontrollierte Spanabfuhr bei mittleren Schnittdaten ausgelegt und trägt so zur stabilen Spanbildung bei. In Verbindung mit der feinen Plattengeometrie und dem Eckenradius von 0,4 mm entstehen reproduzierbare Oberflächen und geringe Vibrationsempfindlichkeit. Das Ergebnis sind kürzere Zykluszeiten und weniger Werkzeugwechsel in produktiven Fertigungsumgebungen. Materialvielfalt und typische Einsatzgebiete Die Wendeschneidplatte eignet sich primär für das Drehen von Stahl und rostfreiem Stahl; die Sorte wurde für verschleiß- und ausbruchfeste Anwendungen entwickelt. Dank der ISO-Genormung passt die Platte in gängige Außenhalter und Bohrstangen, was sie zur universellen Lösung für Werkstätten und Serienfertigungen macht. Die robuste Ausführung unterstützt konstante Bearbeitungsparameter auch bei schwankenden Werkstückchargen. Empfehlung für Auswahl und Einsatz Für eine wirtschaftliche Zerspanung empfiehlt sich die Abstimmung von Schnittdaten auf die AH120-Sorte: moderate Schnittgeschwindigkeiten und konstante Vorschübe reduzieren thermische und mechanische Belastung der Schneidkante. Bei Unklarheiten zur Halterkompatibilität oder zur optimalen Schnittdatenwahl steht technische Beratung zur Verfügung. Empfehlung: Mit der VBMT160404-PS AH120 von Tungaloy Produktionssicherheit erhöhen; bei Fragen technische Details per eMail an info@metav-werkzeuge.com oder Telefon +49 2822 7131930 klären Leistungsmerkmale Artikelnummer: 6837191 Hersteller: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VBMT160404-PS AH120 Hersteller SKU: TUN6837191 Fakten Eckenradius: 0,4 mm Winkel: 35° Freiwinkel: 5° Plattendicke: 4,76 mm Plattengröße: 16 Besonderheiten Material: Hartmetall Beschichtung: PVD-beschichtet (PVD: Physical Vapor Deposition, dünne Schutzschicht) Spanbrecher: PS (für stabile Spanbildung bei mittleren Schnitttiefen) Loch: mit Loch; zylindrisches Loch + einseitige Senkung (40°–60°) Plattenform: rhombisch Anwendung: Drehen Modellserie: ISO-Drehwendeschneidplatten FAQ Ist die VBMT160404-PS AH120 für rostfreien Stahl geeignet? Die VBMT160404-PS AH120 von Tungaloy eignet sich für Bearbeitungen an Stahl und rostfreiem Stahl; die pvd-beschichtete Hartmetallmischung bietet hohen Verschleißschutz bei diesen Werkstoffen. Welche Vorteile bietet die PS-Spanbrechergeometrie? Der PS-Spanbrecher sorgt für kontrollierte Spanformung und zuverlässige Spanabfuhr bei mittleren Schnittdaten, was Vibrationen reduziert und die Oberflächenqualität stabilisiert. Wie wähle ich den richtigen Halter für diese Platte aus? Die Kompatibilität richtet sich nach Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke; für die VBMT160404-PS AH120 sind standardisierte ISO-Außenhalter mit 35°-Einstellung empfehlenswert. Welche Rolle spielt der Eckenradius 0,4 mm bei der Bearbeitung? Der Eckenradius 0,4 mm bietet einen Kompromiss zwischen guter Schneidkantenschärfe und ausreichender Robustheit für mittlere Schnittkräfte, ideal für vielseitige Drehaufgaben. Gibt es Empfehlungen für Schnittdaten mit der AH120-Sorte? Für die AH120-Sorte sind moderate Schnittgeschwindigkeiten und gleichmäßige Vorschübe sinnvoll, um die PVD-Schicht und die Schneidkante zu schonen und so die Standzeit zu maximieren. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VBMT 160404 AH6225 PS Wendeplatten - Tungaloy
Take advantage of a universally applicable, PVD-coated carbide grade and a stable cutting geometry for reliable mid-range turning operations on rostfreier Stahl; compatibility with ISO toolholders keeps inventory lean and changeovers fast. Order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. VBMT 160404 AH6225 – ISO turning insert, PS chipbreaker | Tungaloy VBMT160404-PS AH6225 is a rhombic ISO turning insert designed for external and internal turning tasks, optimised for rostfreier Stahl and variable machining conditions. PVD-coated carbide for rostfreier Stahl machining Rhombic VBMT 16 form with 0.4 mm corner radius Cylindrical hole with single-side countersink 40°–60° Stable cutting edge for medium machining conditions Consistent edge performance for rostfreier Stahl The insert’s AH6225 grade combines a PVD coating with a Hartmetall substrate to deliver a sharp, yet stable cutting edge under varying process conditions. This balance reduces flank wear and postpones edge breakdown during interrupted cuts or unstable setups. For component families made from rostfreier Stahl, the coating improves heat resistance and adhesion control, which supports higher material removal rates without sacrificing repeatability. The choice of a PS chipbreaker promotes predictable chip formation and easier evacuation, reducing rework and downtime. Precise form factor and secure clamping for accuracy Produced to ISO dimensions, the VBMT160404-PS form guarantees interchangeability with compliant clamping systems; fit is determined by form, free angle and tolerance class as well as size and thickness. The rhombic 16 mm outline and 4.76 mm thickness provide a rigid contact face, while the 0.4 mm corner radius maintains profile fidelity on chamfers and shoulders. The insert includes a cylindrical hole with single-side countersink (40°–60°), enabling reliable fastening and repeatable orientation when used with matching shims and screws. A 5° clearance angle and a 35° lead angle are incorporated for controlled cutting geometry and improved surface finish. Practical machining benefits and selection guidance This grade is intended as a universal solution for rostfreier Stahl in medium cutting regimes, where operators require a predictable tool life and consistent surface quality. Selecting the PS chipbreaker and AH6225 grade helps to control long, stringy chips and to avoid built-up edge formation, which is common on rostfreier Stahl. Where higher stability and finish are required, pairing the insert with a rigid holder and optimised cutting data will deliver measurable productivity gains. The insert’s robust edge reduces the frequency of index changes, lowering handling time and promoting efficient batch processing. System integration and serviceability in the workshop The insert forms part of a standard ISO system: insert, matching external holder or boring bar, underlay/clamp set and spare screws. Replacement is straightforward and designed to minimise setup interruption; spare screws and support plates are the only consumables required for reclamping. Because compatibility depends on multiple geometric parameters, verification of holder form and tolerance class is recommended prior to installation. When integrated correctly, the solution offers process reliability and simplified stock management across multiple turning applications. Contact Metav Werkzeuge for tailored recommendations on Tungaloy turning inserts and to discuss compatible holders and cutting data; reach us at info@metav-werkzeuge.com or +49 2822 7131930 for prompt technical support and ordering. Technical data Article number: 6831894 Manufacturer SKU: TUN6831894 Model designation: VBMT160404-PS AH6225 Shape: rhombic (VBMT) Hole: with hole; cylindrical hole + single-side countersink (40°–60°) Numbers / Core technical data Size: 16 mm Thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 5° Lead/approach angle: 35° Special features / Versions Carbide material: Hartmetall Coating / grade: AH6225 (PVD-coated) Chipbreaker: PS Typical application: external and internal turning System components: insert, holder/boring bar, underlay/clamp set, replacement screws FAQ What materials is this insert suited for? The AH6225 grade insert is formulated primarily for rostfreier Stahl; the combination of PVD coating and Hartmetall substrate gives good performance under the typical demands of stainless turning. How does the PS chipbreaker affect chip control? The PS chipbreaker promotes controlled chip formation for medium-cutting conditions and reduces the risk of long, entangling chips when machining rostfreier Stahl. Is the insert compatible with standard ISO VBMT holders? Yes, the insert follows ISO geometry for the VBMT form; compatibility is confirmed by matching form, free angle, tolerance class, fastening method, size and thickness with the chosen holder. What is the significance of the 0.4 mm corner radius? A 0.4 mm radius provides a compromise between edge strength and profile accuracy—suitable for general turning and for maintaining part geometry on shoulders and fillets. Which system parts should be kept in stock for quick changeovers? Keep matching holders or boring bars, underlay/clamp sets and spare screws available; these are the standard items required to replace and secure the insert quickly. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBMT 160404 AH6225 Wendeplatten - Tungaloy
VBMT 160404 AH6225 ISO-Drehwendeschneidplatte, Drehen – Tungaloy VBMT 160404 AH6225 ist eine ISO-genormte Wendeschneidplatte für das Außen- und Innendrehen, konzipiert für rostfreie Stähle und mittlere Schnittbedingungen VBMT160404-PSS AH6225 von Tungaloy PVD-beschichtetes Hartmetall für rostfreie Stähle Rhombische Platte 16 mm mit Eckenradius 0,4 Frei 5° und Plattendicke 4,76 mm für stabile Kante Zylindrisches Loch mit einseitiger Senkung 40°–60° Präzises Design für zuverlässige Zerspanung Die VBMT160404-PSS Wendeschneidplatte kombiniert eine PVD-beschichtung mit hochwertigem Hartmetall und bietet dadurch eine ausgewogene Balance aus Schärfe und Verschleißfestigkeit. Durch den geringen Eckenradius 0,4 mm entsteht eine definierte Schneidkante, die saubere Schnittbilder liefert und die Werkzeugstandzeit bei wechselnden Bedingungen erhöht. Die rhombische Form und das zylindrische Befestigungsloch mit einseitiger Senkung sorgen für form- und kraftschlüssigen Sitz im Halter. Effizienz im Alltag: Anwendung und Nutzen Für das Drehen von rostfreiem Stahl stellt die Sorte AH6225 eine universelle Lösung dar, die sich bei mittleren Zerspanparametern bewährt. Die Kombination aus stabile Schneidkante und geeigneter Spanformer-Geometrie (PSS) reduziert Wiederholarbeit und Nachbearbeitung, was Prozesszeiten verkürzt und die Wirtschaftlichkeit in der Serienfertigung steigert. Anwender profitieren von konstanter Oberfläche und planbaren Standzeiten, besonders bei wechselnden Werkstoffchargen und Bearbeitungsbedingungen. Einsetzbereiche und Kompatibilität Die Platte ist ausgelegt für Außen- und Innendrehen und passt in ISO-kompatible Halter, bei denen Form, Freiwinkel, Toleranzklasse und Dicke übereinstimmen. Die Plattendicke 4,76 mm, der Freiwinkel 5° und die Plattegröße 16 mm erlauben eine robuste Auslegung bei mittleren Schnitttiefen. Dank der universellen Sorte eignet sich das Werkzeug sowohl für Einzelteile als auch für Serienproduktionen, bei denen Prozesssicherheit und Wiederholgenauigkeit gefragt sind. Für produktive Zerspanung: Tungaloy VBMT160404-PSS AH6225 über Metav Werkzeuge anfragen per eMail: info@metav-werkzeuge.com oder Telefon: +49 2822 7131930 Produktmerkmale Artikelnummer: 6831885 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VBMT160404-PSS AH6225 Hersteller SKU: TUN6831885 Fakten Eckenradius: 0,4 mm Plattengröße: 16 mm Plattendicke: 4,76 mm Freiwinkel: 5° Winkel: 35° Besonderheiten Material: Hartmetall Schneidstofftyp: PVD-beschichtetes Hartmetall Sorte: AH6225 (universell für rostfreie Stähle) Spanformer: PSS (Spanbrecher für kontrollierten Spanfluss) Plattenform: rhombisch Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Einsatz: Außen- und Innendrehen FAQ Welche Werkstoffe sind mit der Wendeschneidplatte geeignet? Die VBMT160404-PSS AH6225 von Tungaloy ist speziell für rostfreie Stähle ausgelegt und deckt ein breites Spektrum an austenitischen und ferritischen Werkstoffen bei mittleren Bearbeitungsparametern ab. Wie beeinflusst der Eckenradius die Bearbeitung? Ein Eckenradius von 0,4 mm bietet eine präzise Schneidkante für feine Oberflächen und reduziert Kerbwirkung; das führt bei der VBMT160404-PSS AH6225 zu verbessertem Schnittbild und planbaren Standzeiten. Welche Halter sind kompatibel? ISO-kompatible Außen- und Innenhalter, die Form, Freiwinkel, Toleranzklasse, Befestigung und Dicke der Platte unterstützen, sind geeignet; vor dem Einsatz die Halterdaten mit der Plattengeometrie abgleichen. Was bringt die PVD-Beschichtung konkret? Die PVD-beschichtung erhöht die Verschleißfestigkeit und verbessert die Temperaturbeständigkeit der Schneidkante, wodurch die Tungaloy Platte stabilere Ergebnisse bei variierenden Schnittbedingungen liefert. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VBMT 160404 AH6225 Wendeplatten - Tungaloy
Combining a PVD-coated carbide grade optimised for stainless steels with a sharp yet robust cutting edge and ISO compatibility delivers reliable medium-turning performance and consistent surface finish. Order the VBMT160404-TM AH6225 directly via Metav Werkzeuge or consult the technical advisers for application-specific recommendations. VBMT160404-TM AH6225 — ISO turning insert for stainless steels, Tungaloy VBMT160404-TM AH6225 is an ISO-standard indexable turning insert designed for external and internal turning operations, offering a balance of sharpness and edge stability for variable cutting conditions. ISO rhombic insert, 35° cutting angle PVD-coated carbide grade AH6225 Optimised for stainless steels machining Cylindrical hole with single-side countersink Predictable machining with a universal PVD grade The AH6225 grade combines a PVD-coated carbide substrate with a microstructure tuned for stainless steels, delivering a cutting edge that is both sharp and wear-resistant. This composition reduces the tendency for built-up edge and helps maintain dimensional accuracy during medium-duty turning. For operations where tool life and surface integrity are equally important, the coated grade provides a consistent compromise between edge strength and cutting performance. The coating also aids in heat resistance, extending useful life under varying feeds and speeds. ISO conformity for simple holder compatibility Designed to the ISO indexable insert standards, the insert’s fit is determined by form, clearance, tolerance class, fastening, size and thickness. The ISO-standard designation simplifies selection of compatible external holders and boring bars, reducing setup times and avoiding mismatches. Clear guidance on geometry and tolerance allows predictable clamping and repeatable positioning, which supports process stability and eases tool change procedures on the shop floor. Geometry tuned for turning productivity The rhombic plate form with a 35° included angle and a corner radius of 0.4 mm supports a versatile range of turning tasks, from profiling to medium-facing. The TM chipbreaker promotes controlled chip formation under mixed cutting conditions, improving surface finish and reducing interruptions from long or tangled chips. A modest corner radius helps achieve good surface quality while allowing moderate material removal rates, making the insert suitable for a broad set of stainless-steel turning applications where both finish and productivity matter. Stable mounting and robust plate design A plate thickness of 4.76 mm and insert size of 16 mm provide the rigidity required for steady cutting performance. The carbide substrate delivers the inherent toughness necessary for interrupted cuts, while the cylindrical hole with a single-side countersink (40°–60°) facilitates secure fastening and precise seating in the clamp assembly. These design choices reduce vibration and improve repeatability, which is particularly beneficial in batch production or tool indexing routines. For application advice on Tungaloy’s VBMT160404-TM AH6225 and to secure prompt supply, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6947736 SKU (manufacturer): TUN6947736 Brand: Tungaloy Model series: ISO turning indexable inserts WPL designation: VBMT160404-TM AH6225 Dimensions & core data Corner radius: 0.4 mm Insert size: 16 mm Thickness: 4.76 mm Clearance angle: 5° Included angle: 35° Design & special features Material: Carbide Coating/grade: PVD-coated AH6225 Chipbreaker: TM Plate form: Rhombic Hole: with hole — cylindrical hole + single-side countersink (40°–60°) Application: Turning (external and internal) FAQ Which materials is this insert best suited for? The VBMT160404-TM AH6225 insert from Tungaloy is optimised for machining stainless steels, with the AH6225 grade providing improved resistance to built-up edge during medium turning. How is holder compatibility ensured for this insert? Compatibility depends on form, clearance angle (5°), tolerance class, fastening, size (16 mm) and thickness (4.76 mm); select an ISO-compliant external holder or boring bar matched to these parameters. What advantages does the TM chipbreaker provide? The TM chipbreaker offers controlled chip formation in variable conditions, helping to improve surface finish and reduce chip-related interruptions in turning operations. Is the insert stable for interrupted cuts or medium-duty turning? Yes, the carbide substrate and 4.76 mm thickness give the insert the rigidity and toughness required for interrupted cuts and stable medium-duty turning with repeatable results. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com