VNMG 120402 T9215 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide grade T9215 and the 0.2 mm corner radius to achieve stable chip formation and high productivity in medium-steel turning; order the insert directly via Metav Werkzeuge or consult our specialists for application matching. VNMG120402E-PS T9215 — VNMG 120402 ISO turning insert for turning applications (Tungaloy) The VNMG120402E-PS T9215 is an ISO-standard rhombic turning insert for external and internal turning, featuring a 0° clearance angle, a PS chipbreaker and a CVD-coated carbide grade optimised for medium-steel machining. CVD-coated carbide grade T9215 0.2 mm corner radius for fine profiles ISO rhombic VNMG form, 35° approach angle Cylindrical-hole fastening, PS chipbreaker Improved productivity through wear-resistant CVD coating The CVD-coated T9215 grade combines high wear resistance with reliable fracture toughness, making it a suitable choice for continuous and lightly interrupted cuts in medium steels. The chemical vapour deposition layer protects the substrate during elevated temperatures and maintains edge integrity over longer tool life. As a result, operators benefit from fewer indexings and more consistent cycle times, which supports higher throughput on conventional and CNC lathes. The wear mechanisms are reduced, preserving surface finish and lowering rework rates. Precise geometry for repeatable turning results The rhombic VNMG geometry with a 35° approach provides a balance between cutting-edge strength and access to grooves or shoulders. The 0.2 mm corner radius enables fine profile work while the 4.76 mm plate thickness contributes to rigidity and vibration damping. Compatibility with holders is determined by form, clearance angle, tolerance class, fastening style and thickness; selecting the correct holder and clamping set ensures repeatable accuracy and extends insert life. This insert is supplied with a cylindrical-hole fastening that fits standard ISO-compatible external holders and boring bars. Chip control and process stability with PS chipbreaker The integrated PS chipbreaker was designed to promote short, controllable chips under typical medium-steel cutting conditions. Short chips reduce the risk of surface damage and machine stoppages caused by entangled swarf, improving process stability and operator safety. When combined with the T9215 substrate properties, the chipformer helps to maintain stable cutting forces and consistent cutting temperatures, which in turn supports predictable tool wear behaviour and surface quality. Practical system considerations and application guidance The insert functions within a system consisting of the ISO insert, a matching external holder or boring bar, a locating pad or clamping set and replacement screws. For best results, choose the chipbreaker and grade according to workpiece material, machining type and machine stability. The grade is particularly well suited for medium-steel applications where a balance of productivity and edge robustness is required. Where interrupted cuts or heavy depths of cut are expected, consider a more robust geometry or a different grade tailored to those conditions. Contact Metav Werkzeuge for tailored holder recommendations or to request cutting data sheets and compatible clamping sets for this Tungaloy insert; Metav Werkzeuge can advise on optimisation for specific machines and materials. Technical Data Article number: 6966290 Manufacturer SKU: TUN6966290 Label / SKU: 6966290-Tungaloy Model series: ISO turning inserts Material: Carbide Grade/coating: T9215 (CVD-coated) Facts Corner radius: 0.2 mm Plate thickness: 4.76 mm Plate size: 12 mm ISO code: 120402 Approach angle: 35° Clearance angle: 0° Fastening: with cylindrical hole Special features Rhombic VNMG plate form PS chipbreaker for short chips Suited for external and internal turning Optimised for medium steel machining Compatible with standard ISO holders and clamping sets FAQ What materials is this insert suitable for? The VNMG120402E-PS T9215 is optimised for medium steels; the T9215 CVD-coated carbide combines wear resistance and toughness for consistent performance in these materials. How is holder compatibility determined? Compatibility depends on insert form, clearance angle, tolerance class, fastening style, size and thickness; the rhombic VNMG form and cylindrical-hole fastening require ISO-compatible holders or boring bars. What advantages does the PS chipbreaker offer? The PS chipbreaker promotes short, controllable chips in typical steel turning, improving swarf management, surface protection and process stability during continuous to lightly interrupted cuts. Can this insert be used for internal turning? Yes; the geometry and 35° approach angle allow use in both external and internal turning applications when the correct boring bar or holder is selected. How does the T9215 grade affect tool life? The CVD-coated T9215 grade increases resistance to abrasive wear while retaining fracture toughness, resulting in longer edge life and more predictable tool-change intervals. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMG 120402 T9225 Wendeplatten - Tungaloy
VNMG 120402 T9225 Drehwendeschneidplatte für Drehen von Tungaloy Die VNMG 120402 T9225 ist eine ISO-genormte Drehwendeschneidplatte für präzises Außen- und Innendrehen bei mittleren bis schweren Stahlbearbeitungen Rhombische VNMG-Form, 12 mm Kantenlänge CVD-beschichtetes Hartmetall T9225 TSF-Spanbrecher für mittlere bis schwere Schnitte Zylindrisches Loch und Eckenradius 0.2 mm Plattendicke 4,76 mm, Freiwinkel 0° Robuste Beschichtung für sichere Standzeit und Spanbildung Die Kombination aus CVD-Beschichtung und Hartmetallgrundkörper liefert hohe Zähigkeit und Verschleißfestigkeit bei wechselnden Eingriffsbedingungen. Durch die speziell entwickelte Sorte T9225 lässt sich die Bearbeitung von Stahl mit leicht unterbrochenem Schnitt sicher realisieren, weil die Beschichtung den Werkzeugverschleiß reduziert und so die Standzeit verlängert. Anwender profitieren von konstanter Oberflächengüte und reduzierten Ausfallzeiten. Präzise Geometrie verbessert Prozesssicherheit und Austauschbarkeit Die ISO-genormte Geometrie sorgt dafür, dass die Platte in passende Halter nach Form, Freiwinkel, Toleranzklasse und Befestigung passt. Der Freiwinkel 0° und der Eckenradius von 0.2 mm ermöglichen kontrollierte Spanbildung und wiederholgenaue Ergebnisse. Die Plattendicke von 4,76 mm und die rhombische Form unterstützen eine stabile Halterung und einfache Montage im Produktionsalltag. Vielseitiger Einsatz für Werkstätten mit variablem Materialmix Für das Drehen von Stahl ist diese Wendeschneidplatte besonders geeignet, wenn mittlere bis schwere Schnitte und gelegentliche Unterbrechungen auftreten. Durch die universelle Sorte eignet sich die Platte für Aufträge, die hohe Produktivität mit guter Spanabfuhr verlangen. Fertigungsbetriebe mit wechselnden Losgrößen gewinnen so an Prozesssicherheit und planbarer Werkzeugkostenstruktur. Einfache Integration in bestehende Systemaufbauten Die Platte ist Teil eines ISO-Drehplattensystems und wird zusammen mit Außenhaltern oder Bohrstangen, Unterlagen/Klemmsätzen und Ersatzschrauben eingesetzt. Bei der Auswahl von Spanbrecher und Sorte sollte auf Werkstoff, Bearbeitungsart und Maschinenstabilität geachtet werden. Die TSF-Ausführung erleichtert die Einsatzwahl bei anspruchsvollen Schnittbedingungen und trägt zur stabilen Spanformung bei. Empfehlung: Die Tungaloy Wendeschneidplatte mit CVD-Beschichtung bietet für produktive Stahlbearbeitung eine zuverlässige Kombination aus Standzeit und Spanstabilität — bei technischen Fragen steht das Team von Metav Werkzeuge per E-Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 gern zur Verfügung Produktmerkmale Artikelnummer: 6780652 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VNMG120402E-TSF SKU: TUN6780652 Daten Eckenradius: 0.2 mm Plattendicke: 4,76 mm Plattengröße: 12 mm Winkel: 35° Freiwinkel: 0° Besonderheiten Material: Hartmetall Schneidstofftyp: CVD-beschichtetes Hartmetall (CVD = chemische Gasphasenabscheidung) Sorte: T9225 Spanbrecher: TSF Plattenform: rhombisch Loch: mit Loch Lochstil: zylindrisches Loch Anwendung: Drehen Einsatzhinweis: robuste Universalsorte für mittlere bis schwere Stahlbearbeitung Systemaufbau: ISO-Drehplatte, passender Außenhalter oder Bohrstange, Unterlage/Klemmsatz und Ersatzschrauben FAQ Welche Schnitte deckt die VNMG120402E-TSF T9225 am besten ab? Die VNMG120402E-TSF T9225 von Tungaloy ist für mittlere bis schwere Schnitte bei Stahl optimiert und zeigt besonders bei wechselnden Eingriffsbedingungen gute Standzeit. Ist die Platte mit gängigen ISO-Haltern kompatibel? Ja, die ISO-genormte Geometrie der VNMG120402E-TSF erlaubt die Nutzung in standardisierten Außenhaltern und Bohrstangen, sofern Form, Freiwinkel und Befestigung übereinstimmen. Für welche Werkstoffe ist die Sorte T9225 geeignet? Die Sorte T9225 ist als robuste Universalsorte konzipiert und deckt vor allem Stahlbearbeitungen ab, insbesondere wenn Zähigkeit bei unterbrochenem Schnitt erforderlich ist. Welche Vorteile bietet der TSF-Spanbrecher? Der TSF-Spanbrecher unterstützt stabile Spanbildung und sorgt für kontrollierte Spanabfuhr bei mittleren bis schweren Schnitten, was die Prozesssicherheit erhöht. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VNMG 120402 T9225 Wendeplatten - Tungaloy
VNMG 120402 T9225 ISO-Drehwendeschneidplatten für Drehen – Tungaloy Die VNMG120402E-TF T9225 ist eine ISO-genormte Drehwendeschneidplatte für das Außen- und Innendrehen mit robuster Universalsorte für mittlere bis schwere Stahlbearbeitung Rhombische Wendeschneidplatte, Radius 0,2 CVD-beschichtetes Hartmetall, Sorte T9225 Für mittlere bis schwere Stahlbearbeitung geeignet Passend für Halter mit zylindrischem Loch Freiwinkel 0° und TF-Spanbrecher Produktvorteile für den Fertigungsalltag Produktvorteile zeigen sich in der Kombination aus CVD-beschichtetes Hartmetall und praxisorientierter Geometrie. Die Sorte T9225 ist für wechselnde Eingriffsbedingungen konzipiert und bietet deshalb eine erhöhte Zähigkeit bei leicht unterbrochenen Schnitten. Der Eckenradius 0,2 unterstützt eine sichere Schneidkante und sorgt für stabile Spanbildung. Daraus ergibt sich eine längere Standzeit und geringerer Werkzeugwechselaufwand, was die Produktivität in der Werkstatt erhöht. Einsatzbereiche und Kompatibilitätsvorteile Einsatzbereiche umfassen primär das Drehen von Stahlbauteilen im Außen- und Innendrehen. Die ISO-Genorm stellt sicher, dass die Platte mit Haltern und Bohrstangen kompatibel ist, sofern Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke übereinstimmen. Dank der rhombischen Plattenform und des zylindrischen Lochs lässt sich die Platte in gängigen Spannsystemen sicher positionieren. Anwender erreichen dadurch konstante Bearbeitungsergebnisse bei mittleren bis robusten Schnittbedingungen. Zielgruppe und Werkstoffempfehlung Zielgruppe sind Fertigungsbetriebe und Lohnbearbeiter, die stabile Prozesse und hohe Wiederholgenauigkeit erwarten. Die Platte empfiehlt sich besonders für Bearbeitungen an legiertem und unlegiertem Stahl, wo eine robuste Schneidstoffzusammensetzung gefragt ist. Durch die universelle Einsatzcharakteristik von T9225 lassen sich verschiedene Stahlqualitäten mit reduziertem Sortenwechsel bearbeiten, was die Lagerhaltung vereinfacht und Stillstandzeiten reduziert. Empfehlung: Setzen Sie auf die Kombination aus Tungaloy‑Qualität und der Sorte T9225 für produktive Zerspanung; bei Fragen zur Anwendung erreichen Sie Metav Werkzeuge unter info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930. Technische Daten Artikelnummer: 6787114 Marke: Tungaloy Bezeichnung: VNMG120402E-TF Fakten Radius: 0,2 Plattendicke: 4,76 Plattengröße: 12 Winkel: 35° Freiwinkel: 0° Besonderheiten Material: Hartmetall Sorte: T9225 Beschichtung: CVD-beschichtet Plattenform: rhombisch Spanbrecher: TF (Spanformer TF) Loch: mit Loch Lochstil: zylindrisches Loch SKU Hersteller: TUN6787114 FAQ Welche Anwendung ist für die VNMG120402E-TF T9225 vorgesehen? Die VNMG120402E-TF T9225 von Tungaloy ist für das Außen- und Innendrehen konzipiert und eignet sich besonders für mittlere bis schwere Stahlbearbeitung. Welche Vorteile bietet die CVD-Beschichtung bei dieser Wendeschneidplatte? Die CVD-beschichtung der Sorte T9225 verbessert die Verschleißfestigkeit des Hartmetalls und erhöht die Standzeit bei wechselnden Schnittbedingungen. Passt die Platte auf handelsübliche Halter mit zylindrischem Loch? Ja, die Platte ist mit zylindrischem Loch ausgeführt und kompatibel mit Haltern, die die ISO‑Genorm und die entsprechenden Abmessungen unterstützen. Welche Rolle spielt der Radius 0,2 bei der Bearbeitung? Der Eckenradius 0,2 reduziert Kerbwirkung an der Schneide, fördert stabile Spanbildung und trägt zu gleichmäßigeren Oberflächen bei. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VNMG 120402 T9225 Wendeplatten - Tungaloy
Benefit from the combination of robust universality, consistent wear resistance and secure clamping for uninterrupted turning operations; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. VNMG 120402 T9225 — ISO turning insert for medium–heavy steel machining — Tungaloy The VNMG120402E-PS T9225 is an ISO turning insert for external and internal turning, engineered for reliable performance in variable and slightly interrupted cuts. CVD-coated carbide grade T9225 Robust universal grade for medium–heavy steel Rhombic VNMG form, 0° clearance angle 0.2 mm corner radius, cylindrical centre hole Consistent cutting performance under variable loads The CVD-coated T9225 grade combines a hard, wear-resistant surface with a tougher substrate, delivering a balanced performance suitable for medium–heavy steel machining. The CVD process deposits a thin, adherent coating that reduces flank wear and contributes to a longer tool life without sacrificing fracture resistance. Paired with the PS chipbreaker, the insert promotes controlled chip formation across varying depths of cut, which reduces unplanned stoppages and supports higher productivity in batch or single-piece production. Precision seating and predictable repeatability for efficient setups Compatibility with toolholders is governed by form, clearance, tolerance class, fastening method, size and thickness; the rhombic VNMG geometry and the cylindrical centre hole ensure stable clamping and exact positioning in standard ISO holders. The insert’s 4.76 mm thickness and 12 mm inscribed circle match common toolholder specifications, while the 0° clearance angle and 0.2 mm corner radius provide predictable tool engagement and surface generation. This reduces setup iterations, improves repeatability between tool changes and lowers the risk of incorrect seating. Lower operating cost through process stability and surface quality Using an indexable insert designed for robustness cuts downtime and overall cost per component: the universal character of the grade minimises tool inventory while supporting a wide tolerance of cutting conditions. The geometry and coating combination enhance wear resistance and edge stability, yielding consistent surface finish on turned parts and fewer in-process interventions. The VNMG120402E-PS T9225 insert therefore contributes to steady cycle times and reliable results in both external and internal turning operations, making it a practical choice for production environments that value uptime and predictable outputs. For assured medium–heavy steel turning with proven Tungaloy quality, contact Metav Werkzeuge for availability and detailed application guidance. Technical data Manufacturer article number: 6966292 Manufacturer SKU: TUN6966292 Seller SKU: 6966292-Tungaloy Label: VNMG120402E-PS T9225 Model series: ISO turning indexable inserts Material: carbide Core dimensions Inscribed circle / size: 12 mm Thickness: 4.76 mm Clearance angle: 0° Corner radius: 0.2 mm Cutting angle: 35° Features & applications Shape: rhombic (VNMG) Centre hole: cylindrical Chipbreaker: PS Grade/coating: T9225, CVD-coated carbide Intended use: external and internal turning Typical application: medium to heavy steel machining FAQ Which materials is this insert suited for? The VNMG120402E-PS T9225 insert is designed primarily for medium–heavy steel machining and performs well where tougher cuts or slightly interrupted cuts require increased toughness. What is the purpose of the PS chipbreaker? The PS chipbreaker on this insert promotes controlled chip formation for reliable evacuation and reduced entanglement, supporting stable cutting in the recommended steel applications. How does the 0.2 mm corner radius affect machining? A 0.2 mm corner radius balances strength and surface finish: it strengthens the cutting edge against chipping while helping to achieve a consistent surface profile on turned components. Which holder characteristics must match for correct use? Correct compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness; the rhombic VNMG form and cylindrical centre hole are standard features for ISO-compatible holders. Is the insert coated and how does that help? Yes, the insert uses a CVD-coated carbide grade (T9225) which enhances wear resistance and edge life while maintaining sufficient toughness for variable cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMG 120404 AH6225 Wendeplatten - Tungaloy
Benefit from a combination of a sharp, stable cutting edge provided by the PVD‑coated AH6225 grade and the ZF chipbreaker engineered for stainless steels to secure consistent surface finish and process reliability in medium‑duty turning. The rhombic VNMG form with a 0.4 mm corner radius and 35° cutting angle offers predictable chip control and repeatable seating in ISO holders; order the insert directly via Metav Werkzeuge or ask their consultants for matching holder specifications. VNMG120404 AH6225 — ISO turning insert, PVD-coated carbide, ZF chipbreaker by Tungaloy A VNMG120404E‑ZF AH6225 ISO turning insert for external and internal turning, designed for medium‑duty machining of stainless steels with a balance of sharpness and edge stability. PVD‑coated carbide grade AH6225 ZF chipbreaker for stainless steels Rhombic VNMG 12, 35° cutting angle 0.4 mm corner radius, 4.76 mm thickness Consistent cutting edge for repeatable production results The insert uses a PVD‑coated carbide substrate in the AH6225 grade that combines wear resistance with a finely honed edge geometry. This composition supports sustained cutting performance during interrupted cuts and changing conditions, reducing the need for frequent index changes. The ZF chipbreaker is tailored for stainless steels, improving chip evacuation and lowering the risk of built‑up edge formation; this leads to fewer surface defects and a steadier cycle time in serial turning operations. ISO compatibility and secure clamping for automated setups Designed as an ISO‑standard indexable plate, the rhombic VNMG form and the central cylindrical hole ensure compatibility with common external holders and boring bars. The 35° cutting angle and the defined 0° relief angle promote a stable engagement and minimise vibration in less rigid setups. As the insert is specified to fit by form, size, thickness and fastening, integration into an existing tool system is straightforward when matching the holder’s tolerance class and screw type. Optimised for stainless steel turning with reliable chip control For turning of stainless steels, the combination of a sharp edge and the ZF chipbreaker supports short, manageable chips and lowers thermal loads at the cutting edge. Medium feed and speed ranges benefit from the insert’s balance between edge toughness and sharpness: the tool resists edge chipping while still providing clean shearing, resulting in improved surface finish and dimensional stability on both external and internal contours. Practical handling, inspection and economical use The insert’s rhombic geometry and 0.4 mm corner radius make it suitable for both finishing and light medium machining where a controlled corner is required. Its 4.76 mm thickness affords adequate rigidity for repetitive cycles, while the PVD layer adds protection against adhesion and abrasive wear. For workshop logistics, the ISO designation simplifies stock management and reordering; pairing the insert with the correct holder and clamp set reduces downtime and supports predictable tool‑life planning. Discuss specific application parameters and availability of the Tungaloy VNMG120404E‑ZF AH6225 insert with Metav Werkzeuge to ensure optimal holder matching and process settings Technical Data Article number: 6947449 SKU: 6947449-Tungaloy Manufacturer SKU: TUN6947449 Label: VNMG120404E-ZF AH6225 Facts Shape: Rhombic (VNMG) Size: 12 Thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Special features Grade / coating: AH6225, PVD-coated carbide Chipbreaker: ZF Hole: with cylindrical hole Cutting angle: 35° Application: Turning (external and internal) FAQ What materials is this insert designed for? The Tungaloy VNMG120404E‑ZF AH6225 insert is formulated primarily for stainless steels and performs well in medium‑duty turning operations. How does the ZF chipbreaker affect machining performance? The ZF chipbreaker on the VNMG insert promotes short, controllable chips and improved chip flow, which helps maintain surface quality and reduces tool‑related interruptions. Which holder features must be checked for compatibility? Compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness; ensure the holder matches the ISO plate dimensions and central hole style for secure seating of the VNMG insert. Is the AH6225 grade suitable for interrupted cuts? The PVD‑coated AH6225 carbide grade combines a sharp cutting edge with sufficient toughness for interrupted and variable‑condition turning, offering stable performance in many stainless‑steel applications. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
VNMG 120404 AH6225 Wendeplatten - Tungaloy
VNMG120404E-PM AH6225 ISO-Drehwendeschneidplatte zum Drehen von rostfreien Stählen – Tungaloy VNMG120404E-PM AH6225 bietet präzise Drehbearbeitung bei wechselnden Bedingungen, speziell optimiert für den Einsatz an rostfreien Stählen Universell einsetzbar für rostfreie Stähle PVD-beschichtetes Hartmetall für bessere Standzeit Rhombische Form mit zylindrischem Loch für sichere Fixierung Eckenradius 0,4 mm für feine Oberflächen ISO-genormte Abmessungen für einfache Holder-Kompatibilität Mehr Produktivität bei wechselnden Bearbeitungsbedingungen Die Kombination aus PVD-beschichtetem Hartmetall und der Sorte AH6225 sorgt für eine ausgewogene Balance zwischen scharfer Schneidkante und stabiler Standzeit. Dadurch lässt sich die Bearbeitungszeit an der Maschine reduzieren, weil weniger Werkzeugwechsel erforderlich sind. Die Wendeschneidplatte ist für das Drehen von rostfreien Stählen optimiert und bietet eine zuverlässige Spanbildung auch bei unterbrochenem Schnitt. Anwender profitieren von konstanter Zerspanleistung und höherer Teileausbeute. Sichere Prozesse durch stabile Schneidkante und konstante Ergebnisse Mit einem Eckenradius von 0,4 mm und einer robusten Schneidstoffzusammensetzung wird eine gleichbleibend gute Oberflächengüte erreicht. Die Platte unterstützt wiederholgenaue Schnitte, was Rüstzeiten verkürzt und Ausschuss minimiert. Das Ergebnis ist eine bessere Planbarkeit im Fertigungsprozess und eine spürbare Steigerung der Produktivität bei Serienläufen. Die ISO-Norm gewährleistet, dass sich die Platte unkompliziert in bestehende Haltersysteme integrieren lässt. Systemkompatibilität und einfache Handhabung im Fertigungsalltag Die ISO-genormte Bauform ermöglicht die schnelle Auswahl des passenden Außenhalters oder der Bohrstange; Befestigung erfolgt über ein zylindrisches Loch mit entsprechender Unterlage und Ersatzschrauben. Durch die standardisierten Maße entfällt aufwändiges Anpassen von Spannmitteln, wodurch Rüstvorgänge beschleunigt werden. Die rhombische Plattenform bietet vielseitige Einsatzmöglichkeiten für Außen- und Innendrehen. Material- und Sortenwahl erklärt für Anwender ohne Spezialwissen Die Sorte AH6225 ist eine universelle Wahl für rostfreie Stähle und wurde als PVD-beschichtetes Hartmetall ausgelegt, um eine scharfe, aber zugleich stabile Schneidkante zu liefern. PVD-Beschichtungen reduzieren den Verschleiß bei thermisch belasteten Schnitten und verbessern die Spanabfuhr. Der Spanbrechertyp PM ist für feine bis mittlere Spanbildung optimiert und unterstützt saubere Spanabfuhr bei wechselnden Schnittparametern. So wird das Werkzeug auch für weniger spezialisierte Fertigungsaufgaben sicher einsetzbar. Empfehlung: Setzen Sie auf die robuste Kombination aus der VNMG120404E-PM AH6225 von Tungaloy und modularen ISO-Haltersystemen, um Prozesssicherheit und Standzeit in der Drehbearbeitung zu steigern. Bei Fragen zur Anwendung oder zur optimalen Sortenwahl erreichen Sie uns per eMail unter info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930. Produkteigenschaften Artikelnummer: 6966326 Marke: Tungaloy Modellserie: ISO-Drehwendeschneidplatten Bezeichnung: VNMG120404E-PM AH6225 SKU: TUN6966326 Fakten Eckenradius: 0,4 mm Plattendicke: 4,76 mm Plattengröße: 12 mm Freiwinkel: 0° Winkel: 35° Besonderheiten Material: Hartmetall Beschichtung: PVD Sorte: AH6225 (universell für rostfreie Stähle) Spanbrecher: PM (feine bis mittlere Spanbildung) Plattenform: rhombisch Lochstil: zylindrisches Loch Anwendung: Drehen FAQ Welche Werkstoffe sind mit dieser Wendeschneidplatte am besten zu bearbeiten? Die VNMG120404E-PM AH6225 von Tungaloy ist speziell für rostfreie Stähle ausgelegt; die Sorte AH6225 liefert eine gute Balance zwischen Schärfe und Standzeit für diese Werkstoffgruppe. Wie beeinflusst die PVD-Beschichtung die Standzeit? Die PVD-Beschichtung der Tungaloy VNMG120404E-PM reduziert thermischen Verschleiß und verbessert die Gleiteigenschaften, was zu längeren Standzeiten und stabilerer Spanbildung führt. Ist die Platte mit Standard-ISO-Haltern kompatibel? Ja, die Platte entspricht ISO-Abmessungen und lässt sich mit passenden Außenhaltern oder Bohrstangen verwenden; Kompatibilität wird durch Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke bestimmt. Für welchen Bereich ist der Spanbrecher PM geeignet? Der Spanbrecher PM ist für feine bis mittlere Spanbildung vorgesehen und eignet sich besonders bei variierenden Schnittbedingungen und moderaten Vorschüben. Welche Vorteile bringt der Eckenradius 0,4 mm in der Praxis? Ein Eckenradius von 0,4 mm unterstützt feine Oberflächen und reduziert Spitzenausbrüche, wodurch Nachbearbeitung minimiert und Maßhaltigkeit verbessert werden. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VNMG 120404 AH6225 Wendeplatten - Tungaloy
Take advantage of a universal, PVD-coated cemented carbide grade that delivers a sharp yet stable cutting edge for stainless steels, combined with the consistent geometry of an ISO VNMG format for reliable turning cycles. Order the insert directly via Metav Werkzeuge or contact our consultants for application-specific advice. VNMG 120404 AH6225 ISO turning insert – PVD-coated carbide, 0° relief | Tungaloy The VNMG120404E-TM AH6225 is an ISO turning insert designed for external and internal turning, offering a balance of sharpness and edge stability for machining stainless steels. PVD-coated cemented carbide AH6225 Universal grade optimised for stainless steels Rhombic VNMG form with 0.4 mm corner radius Consistent cutting performance for stainless steels The AH6225 grade combines a PVD-coated surface with a cemented carbide substrate to deliver consistent wear resistance and reduced adhesion when machining stainless steels. This composition supports a sharp, stable cutting edge that maintains dimension and surface quality under fluctuating conditions. The coating reduces built-up edge and increases thermal stability, which helps to extend tool life during medium-duty turning operations. Geometry engineered for process stability The VNMG rhombic format, with a 0.4 mm corner radius and a plate thickness of 4.76 mm, provides a robust seat in the toolholder and improved vibration damping. The insert’s 0° relief angle ensures predictable contact and is suitable for matched holders designed for ISO inserts; the presence of a cylindrical hole assists secure clamping. These geometric choices contribute to reproducible part tolerances and reduced tool-change downtime in serial production. Reliable chip control and flexible application Equipped with the TM chipbreaker, the insert is aimed at medium machining where chip control and consistent evacuation are essential. The chipformer and the universal grade allow use across a broad range of stainless grades and varying cutting conditions. Compatibility with the machining set-up is defined by insert form, relief angle, tolerance class, fastening method, size and thickness, so the insert integrates into standard ISO tool systems for turning and boring. Practical system integration and process benefits As an ISO-standard indexable insert, the VNMG120404E-TM AH6225 fits into established systems comprising an appropriate external holder or boring bar, a support shim or clamping kit, and standard replacement screws. The combination of a universal carbide grade, precise plate geometry and a factory-specified chipbreaker supports efficient cycle times, consistent surface finish and reliable repeatability in component production. The SKU and manufacturer references facilitate reordering and process documentation. Contact Metav Werkzeuge for tailored machining recommendations on Tungaloy inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 for specification checks and availability Technical data Article number: 6947473 SKU: 6947473-Tungaloy Manufacturer article number: 6947473 Manufacturer SKU: TUN6947473 Label: VNMG120404E-TM AH6225 Material: Cemented carbide Coating: PVD (AH6225) Facts Corner radius: 0.4 mm Relief/clearance angle: 0° Included angle: 35° Plate thickness: 4.76 mm Plate size: 12 Hole style: cylindrical hole Plate form: rhombic Chipbreaker: TM Special features Application: Turning (external and internal) Grade: AH6225, universal for stainless steels System: ISO turning insert, fits matched holders and boring bars Typical assembly: insert, holder, support shim/clamping kit, replacement screws FAQ Which materials is this insert best suited for? The VNMG120404E-TM AH6225 is optimised for machining stainless steels, with the AH6225 grade providing a balance of edge sharpness and wear resistance suited to medium turning operations. What benefits does the PVD coating bring? The PVD layer on the cemented carbide improves thermal resistance and reduces adhesion, helping to avoid built-up edge and extending effective tool life during varied cutting conditions with the VNMG geometry. How does the TM chipbreaker influence machining? The TM chipbreaker promotes controlled chip formation and evacuation in medium machining, improving process reliability and surface finish while reducing the risk of entanglement. How can compatibility with holders be ensured? Compatibility is determined by the insert form, relief angle, tolerance class, fastening method, plate size and thickness; match the VNMG120404E-TM dimensions and clamping style to a suitable ISO holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMG 120404 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide grade optimised for stainless steels, a stable SM chipbreaker, and ISO compatibility for consistent production results. Order the VNMG120404E-SM AH6225 directly via Metav Werkzeuge or ask our consultants if needed. VNMG 120404 AH6225 — Indexable turning insert, PVD-coated carbide, SM chipbreaker (Tungaloy) VNMG120404E-SM AH6225 is an ISO-standard rhombic indexable insert for external and internal turning, designed for stable cutting on stainless steels with a balanced edge life and surface quality PVD-coated carbide grade AH6225 SM chipbreaker optimised for stainless steels Rhombic VNMG form with 35° approach angle 0.4 mm corner radius for reliable finishing Consistent performance for stainless-steel turning The combination of a PVD-coated surface and a modern carbide substrate provides consistent edge strength and wear resistance during medium-duty machining. The chosen grade, AH6225, is formulated as a universal option for stainless steels, offering a sharp yet robust cutting edge that reduces the risk of built-up edge under changing conditions. This balance results in steadier cutting forces and improved cycle-time predictability, helping to maintain throughput without frequent insert changes. Predictable mounting and compatibility with ISO tooling As an ISO-indexable insert, compatibility with the toolholder depends on form, relief angle, tolerance class, clamping method, size and thickness. The rhombic VNMG geometry with a cylindrical hole enables positive clamping in standard external holders or boring bars designed for VNMG plates. Specifying the correct tolerance class and ensuring the holder matches the 4.76 mm plate thickness and 12 mm inscribed circle guarantees repeatable seating, stable cutting and straightforward index changes for minimal downtime. Improved chip control and surface quality in practice The SM chipbreaker is tailored for ductile and work-hardenable materials often encountered with stainless steels; it assists in breaking chips into manageable segments and reduces the tendency for long, stringy chips. Combined with a 0.4 mm corner radius and the 35° approach angle, the geometry supports fine finishing operations while maintaining edge stability during interrupted cuts. For shops requiring versatile inserts that perform across varying cutting conditions, this design reduces manual rework and contributes to consistent part quality. Discuss Tungaloy turning solutions with Metav Werkzeuge today — our specialists can advise on holder selection, cutting data and immediate availability to support production demands Technical Data Article number: 6903235 Manufacturer SKU: TUN6903235 Stock SKU: 6903235-Tungaloy Model series: ISO indexable turning inserts Name: VNMG120404E-SM AH6225 Facts Grade / designation: AH6225 Substrate / material: carbide Coating: PVD Corner radius: 0.4 mm Inscribed circle: 12 mm Plate thickness: 4.76 mm Relief angle: 0° Approach/lead angle: 35° Hole: with cylindrical hole Special features SM chipbreaker Rhombic VNMG geometry ISO-standardised insert Intended application: turning (external and internal) Optimised for stainless steels Compatible with matching ISO holders and boring bars FAQ What materials is this insert best suited for? The AH6225 grade is a universal, PVD-coated carbide specifically formulated for stainless steels, providing a balance of sharpness and edge stability for medium cutting conditions. Which turning operations are recommended with this insert? This rhombic VNMG insert is suitable for both external and internal turning operations and is frequently used where good surface finish and predictable tool life are required. How does the SM chipbreaker affect machining? The SM chipbreaker promotes segmenting of chips when machining ductile materials like stainless steels, reducing long chip formation, helping secure consistent surface quality and easing chip evacuation. How can I ensure the insert fits my holder? Compatibility is determined by the insert form, relief angle, tolerance class, clamping method, size and thickness; matching these parameters to the toolholder ensures correct seating and stable performance. What are the key geometry values to consider for process planning? Important values include the 0.4 mm corner radius, 12 mm inscribed circle, 4.76 mm thickness and 35° approach angle; these influence cutting forces, surface finish and rigidity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMG 120404 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp, stable cutting edge and PVD-coated carbide for consistent stainless-steel turning; ensure holder compatibility by matching form, clearance angle and size, and order directly via Metav Werkzeuge or consult the advisers if needed. VNMG120404E-TSF AH6225 — ISO turning indexable insert for stainless steels, 0.4 mm corner radius (Tungaloy) The VNMG120404E-TSF AH6225 is an ISO-standard rhombic turning insert engineered for external and internal turning operations on stainless steels, offering a balanced edge for medium machining conditions. PVD-coated carbide AH6225 for stainless steels Rhombic VNMG form, ISO 120404 size 0.4 mm corner radius for precise profiling Cylindrical hole for secure clamping High process reliability through optimised grade and geometry The combination of the AH6225 PVD-coated carbide and the rhombic VNMG geometry delivers predictable results in medium-duty turning of stainless steels. The coating supports a sharp, wear-resistant edge while the substrate ensures toughness under variable cutting forces. As a result, the insert provides stable tool life and consistent surface finish, reducing unplanned downtime and contributing to efficient batch production. Straightforward integration with standard toolholders Compatibility is governed by form, clearance angle, tolerance class, fastenings, size and thickness; the ISO 120404 designation and the VNMG outline simplify selection of a matching external holder or boring bar. The 0° clearance angle and the 35° approach orientation support a broad range of clamping systems, and the cylindrical hole ensures secure locating. Correct holder pairing helps maintain repeatable cutting conditions and repeatable component tolerances. Effective chip control and material suitability The TSF chipbreaker was developed for mixed stainless-steel applications and assists in splitting and evacuating chips during turning, especially under interrupted cuts. The PVD-coated surface reduces built-up edge tendency common with stainless alloys, while the carbide base provides the necessary edge stability. For customers processing ferritic, austenitic or duplex grades, this insert offers a reliable balance between surface quality and tool life. Productivity advantages and recommended use cases Designed for external and internal turning, this indexable insert supports medium cutting parameters where a sharp yet robust edge is required. The 0.4 mm corner radius allows accurate profile work and dimensional control on turned features. Selecting the appropriate chipbreaker and matching insert grade to the workpiece material results in fewer tool changes, improved cycle times and a steadier production flow for both small and large batches. Contact Metav Werkzeuge today for personalised advice on Tungaloy VNMG120404E-TSF AH6225 inserts and to ensure correct holder selection — request order or technical guidance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6947440 Manufacturer SKU: TUN6947440 SKU: 6947440-Tungaloy Model series: ISO turning indexable inserts Designation: VNMG120404E-TSF AH6225 Core data Size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Approach/lead angle: 35° ISO code: 120404 Special features PVD-coated carbide grade AH6225 Rhombic VNMG plate form TSF chipbreaker for stainless steels Cylindrical hole for secure clamping Intended application: turning (external and internal) FAQ What materials is this insert suitable for? The VNMG120404E-TSF AH6225 insert is specified for stainless steels, providing a balanced cutting edge and wear resistance for common austenitic and ferritic grades. How does the TSF chipbreaker affect machining? The TSF chipbreaker on this indexable insert helps control and break chips during turning, improving chip evacuation and reducing the risk of entanglement in general stainless-steel machining. Which holders are compatible with the ISO 120404 VNMG geometry? Compatibility depends on holder form, tolerance class, fastening method and size; holders designed for VNMG ISO 120404 inserts with a matching clamping system are suitable for secure use of this insert. Is the AH6225 grade suitable for interrupted cuts? The AH6225 PVD-coated carbide substrate offers sufficient edge stability for many interrupted-cut scenarios in medium machining, though specific cutting parameters should be validated per application. What is the significance of the 0° clearance angle and 35° approach? A 0° clearance angle supports certain holder geometries and edge strength, while the 35° approach angle influences cutting forces and surface finish; together they guide holder selection and cutting-condition optimisation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMG 120404 AH6225 Wendeplatten - Tungaloy
The combination of a PVD-coated carbide grade AH6225 and an SS chipbreaker ensures stable cutting and dependable edge life for stainless steel turning; this insert suits both external and internal operations. Order the VNMG120404E-SS AH6225 directly via Metav Werkzeuge or consult our specialists for optimisation and setup advice. VNMG120404E-SS AH6225 — ISO turning insert for stainless steels, PVD-coated carbide (Tungaloy) A VNMG120404E-SS AH6225 ISO-standard turning insert designed for reliable external and internal turning of stainless steels, offering a sharp yet robust cutting edge for medium machining and variable conditions. PVD-coated carbide grade AH6225 Optimised for stainless steels Rhombic VNMG, 35° cutting angle Cylindrical-hole design for secure clamping Precise edge control for consistent stainless-steel machining The PVD-coated carbide grade AH6225 delivers a sharp, stable cutting edge that resists built-up edge formation during challenging stainless-steel operations. The integrated SS chipbreaker promotes predictable chip formation and evacuation, reducing heat concentration at the cutting zone and lowering the risk of surface smearing. With a 0° rake and a 0.4 mm radius, the geometry supports repeatable part tolerances and a balance between edge strength and finish quality. This combination yields reduced rework and consistent cycle times in both interrupted and continuous cuts. ISO compatibility and straightforward toolset integration Manufactured to ISO standards, the insert fits holders that match form, relief angle, tolerance class, clamping style, size and thickness. The rhombic VNMG shape and cylindrical hole enable secure, repeatable clamping, while the plate thickness of 4.76 mm contributes to rigidity in heavier cuts. The ISO designation simplifies inventory and replacement planning across mixed-machine environments. Clear geometric specifications allow predictable tool path programming and fast, safe insert changes, reducing downtime and supporting stable production flow. Robust performance across varying conditions Designed for medium machining and fluctuating cutting conditions, the PVD-coated surface improves wear resistance and reduces edge adhesion. The insert sustains performance when feeds or depths vary, helping to maintain surface finish and dimensional accuracy across batches. The grade’s balanced toughness and hardness extend tool life under assorted workpiece hardness and alloy compositions commonly encountered in stainless-steel turning. As a result, operating costs fall through fewer indexings and longer intervals between replacements. Practical advice for efficient use and longer tool life Select feeds and speeds that match the material grade and toolholder rigidity; modest increases in feed can improve chip control with the SS breaker, while conservative speeds often limit heat-related wear on stainless steels. The rhombic VNMG geometry with a 35° cutting angle suits both external profiling and internal shoulder turning when paired with appropriate holders. For stable results, ensure correct clamping torque and use matching underplates and screws to preserve insert position and repeatability. For complex setups or optimised cutting data, technical guidance is available from Metav Werkzeuge. Contact Metav Werkzeuge today for tailored cutting data and ordering assistance for Tungaloy AH6225 VNMG inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6903228 Manufacturer SKU: TUN6903228 SKU: 6903228-Tungaloy Manufacturer: Tungaloy Model series: ISO turning indexable inserts Core specifications Size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Cutting angle: 35° Relief angle: 0° Hole: with cylindrical hole Materials & features Material: carbide Grade/coating: AH6225 (PVD-coated) Chipbreaker: SS Shape: rhombic (VNMG) Application: turning (external and internal) FAQ What materials is this insert suitable for? The VNMG120404E-SS AH6225 is optimised for stainless steels, offering good chip control and edge stability when turning austenitic and other stainless alloys. Can the insert be used for internal and external turning? Yes, the rhombic VNMG form and secure cylindrical-hole clamping make the VNMG120404E-SS AH6225 suitable for both external profiling and internal shoulder work when used with the correct holder. What does the SS chipbreaker mean for machining? The SS chipbreaker on the AH6225 grade promotes short, manageable chips and consistent evacuation, which improves process reliability and reduces the risk of chip entanglement. Which dimensions are critical when matching a holder? Match form, relief angle, tolerance class, clamping method, size (12 mm) and thickness (4.76 mm) of the insert to the holder to ensure correct fit and repeatable performance. How does the AH6225 grade affect tool life and finish? AH6225 (PVD-coated) balances toughness and wear resistance for medium machining, extending tool life under varying conditions while maintaining a high-quality surface finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMG 120404 AH6225 Wendeplatten - Tungaloy
VNMG 120404 AH6225 Drehwendeschneidplatte für Drehen von Tungaloy Die VNMG 120404 AH6225 ist eine ISO-genormte Drehwendeschneidplatte für präzises Außen- und Innendrehen, ausgelegt auf rostfreie Stähle und mittlere Schnittbedingungen PVD-beschichtet für hohe Standzeit Geeignet für rostfreie Stähle und wechselnde Bedingungen Rhombische Form, Plattengröße 12 mm Eckenradius 0,4 mm für feine Oberflächen Mit zylindrischem Loch für einfache Spannfixierung Leistungsstarke Schneidkante für rostfreie Stähle Die Platte basiert auf einem PVD-beschichteten Hartmetall, das eine scharfe und zugleich stabile Schneidkante bietet. Durch die Sorte AH6225 entsteht eine ausgewogene Kombination aus Wirtschaftlichkeit und Standzeit, speziell bei der Bearbeitung von rostfreien Stählen. Anwender profitieren von gleichmäßiger Spanbildung und einer verbesserten Oberflächengüte bei mittleren Schnittparametern, ohne ständig die Werkzeugstellung anpassen zu müssen. Die Auswahl des passenden Spanbrechers TF optimiert den Spanfluss bei wechselnden Werkstoff- und Stabilitätsbedingungen. Geometrie für präzise Ergebnisse und lange Standzeit Die rhombische Plattenform mit Eckenradius 0,4 mm und einem Winkel von 35° sorgt für wiederholgenaue Schnitte und reduzierte Vibrationen. Der Freiwinkel 0° ist für stabile Schneidbedingungen ausgelegt und unterstützt eine konstante Schneidkante. In Kombination mit dem PVD-Finish reduziert diese Geometrie Verschleißmechanismen und verlängert die Laufzeit, was Rüstzeiten senkt und die Produktivität in der Serienfertigung erhöht. Erklärung: Ein kleiner Eckenradius liefert feinere Oberflächen, größere Radien erhöhen die Schneidkantenstabilität. Systemkompatibilität und Einsatzbereiche Die Modellserie ist Teil der ISO-Drehwendeschneidplatten und passt in konventionelle Außenhalter und Bohrstangen, wobei Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke die Kompatibilität bestimmen. Typische Anwendungen sind Außen- und Innendrehen in Handwerks- und Industriebetrieben. Empfohlen für Anwender in der Maschinenbau-, Lohnfertigungs- und Automotive-Branche, die eine verlässliche, universelle Sorte für wechselnde Produktionsbedingungen suchen. Einfacher Wechsel und robustes Systemaufbau Der Systemaufbau umfasst die ISO-Platte, passende Außenhalter oder Bohrstangen, Unterlagen/Klemmsätze und Ersatzschrauben, sodass ein schneller Werkzeugwechsel möglich ist. Die Platte verfügt über ein zylindrisches Loch, eine Plattendicke von 4,76 mm und eine Plattengröße von 12 mm, was die Lagerhaltung vereinfacht und den schnellen Austausch in Mehrspindel- oder CNC-Anlagen unterstützt. Durch die Normierung ist die Integration in bestehende Werkzeugsets unkompliziert möglich. Für zuverlässige Zerspanung auf rostfreien Stählen empfiehlt sich die Nutzung der VNMG 120404 AH6225 von Tungaloy; technische Beratung und Bestellung gern über Metav Werkzeuge – eMail: info@metav-werkzeuge.com, Telefon: +49 2822 7131930 Produktmerkmale Artikelnummer: 6947428 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VNMG120404E-TF Fakten Eckenradius: 0,4 mm Winkel: 35° Freiwinkel: 0° Plattendicke: 4,76 mm Plattengröße: 12 Besonderheiten Material: Hartmetall Beschichtung: PVD Sorte: AH6225 — universelle Sorte für rostfreie Stähle Spanbrecher: TF — optimierter Spanformer für wechselnde Bedingungen Plattenform: rhombisch Loch: mit Loch Lochstil: zylindrisches Loch Anwendung: Drehen Schneidstofftyp: PVD-beschichtetes Hartmetall FAQ Ist die Platte für Innen- und Außenbearbeitung geeignet? Die VNMG120404E-TF AH6225 von Tungaloy ist für Außen- und Innendrehen ausgelegt; die rhombische Form und der Spanbrecher TF ermöglichen universelle Anwendungen bei rostfreien Stählen. Welche Materialien kann ich mit dieser Sorte bearbeiten? Die Sorte AH6225 ist primär für rostfreie Stähle optimiert; die PVD-Beschichtung und das Hartmetallsubstrat steigern die Standzeit bei wechselnden Schnittbedingungen. Wie beeinflusst der Eckenradius die Bearbeitung? Ein Eckenradius von 0,4 mm liefert eine feine Oberflächengüte; bei Bedarf an höherer Stabilität empfiehlt sich eine größere Radienwahl in der entsprechenden Plattenfamilie. Welche Halter sind kompatibel mit dieser ISO-Platte? Kompatibilität richtet sich nach Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke; die VNMG120404E-TF passt in standardisierte ISO-Außenhalter und Bohrstangen. Welche Vorteile bietet die PVD-Beschichtung? Die PVD-Beschichtung reduziert Verschleiß, verbessert die Wärmebeständigkeit an der Schneidkante und erhöht die Lebensdauer der Platte unter wechselnden Betriebsbedingungen. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VNMG 120404 AH6225 Wendeplatten - Tungaloy
VNMG 120404 AH6225 ISO-Drehwendeschneidplatte zum Drehen — Tungaloy Die VNMG120404E-PS AH6225 ist eine ISO-genormte Drehwendeschneidplatte für das Drehen von rostfreiem Stahl mit PVD-beschichtetem Hartmetall und PS-Spanbrecher. PVD-beschichtetes Hartmetall für lange Standzeit Optimierte Schneidkante für rostfreien Stahl PS-Spanbrecher für stabile Spanbildung Rhombische Platte mit zylindrischem Loch Kompatibel zu ISO-Drehhaltern mit 0° Freiwinkel Effiziente Lösung für das Drehen rostfreier Werkstoffe Die VNMG120404E-PS AH6225 bietet durch den PVD-Beschichtungsaufbau und das hochwertige Hartmetall eine ausgewogene Kombination aus Verschleißfestigkeit und scharfer Schneidkante. Diese Konstellation reduziert Stillstandszeiten und erhöht die Produktivität bei mittleren Schnittbedingungen. Anwender profitieren besonders beim Außen- und Innendrehen rostfreier Stähle, weil die Sorte AH6225 gezielt für wechselnde Schnittbedingungen ausgelegt ist und dadurch konstante Ergebnisse liefert. Präziser Spanfluss und stabile Bearbeitung Der PS-Spanbrecher sorgt für kontrollierte Spanform und verbessert die Spanabfuhr selbst unter variierenden Schnittbedingungen. Mit einem Eckenradius von 0,4 mm und einem Freiwinkel von 0° lassen sich saubere Oberflächen und reproduzierbare Maßhaltigkeit erreichen. Durch die stabilen Standzeiten sinkt der Werkzeugverschleiß, was die Prozesskosten reduziert und die Wirtschaftlichkeit erhöht. Passgenaues System für sichere Montage und Vielseitigkeit Die rhombische Plattenform mit zylindrischem Loch sowie die ISO-Normgeometrie gewährleisten eine einfache Montage auf gängigen Außenhaltern und Bohrstangen. Die Plattendicke von 4,76 mm und die Plattengröße 12 mm bieten mechanische Stabilität für moderate Schnitttiefen. Anwender erhalten durch die breite Werkstoffkompatibilität der Sorte AH6225 eine universelle Lösung, die den Lagerbestand reduziert. Empfehlung: Für zuverlässige Zerspanung und verfügbare Beratung die VNMG120404E-PS AH6225 bei Metav Werkzeuge anfragen – Kontakt: info@metav-werkzeuge.com, Telefon: +49 2822 7131930 Leistungsmerkmale Artikelnummer: 6966303 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VNMG120404E-PS AH6225 SKU Hersteller: TUN6966303 Fakten Eckenradius: 0,4 mm Winkel: 35° Plattendicke: 4,76 mm Plattengröße: 12 mm Freiwinkel: 0° Besonderheiten Material: Hartmetall Schneidstofftyp: PVD-beschichtetes Hartmetall Sorte: AH6225 (universell für rostfreie Stähle) Spanbrecher: PS Plattenform: Rhombisch Lochstil: zylindrisches Loch Anwendung: Drehen Systemaufbau: ISO-genormte Drehwendeschneidplatte, kompatibel zu passenden Außenhaltern und Bohrstangen FAQ Welche Werkstoffe eignen sich für diese Wendeschneidplatte? Die VNMG120404E-PS AH6225 von Tungaloy ist speziell für rostfreie Stähle ausgelegt; die Sorte AH6225 liefert in diesem Einsatzgebiet eine stabile Spanbildung und gute Oberflächenqualität. Welchen Einfluss hat der PS-Spanbrecher auf die Bearbeitung? Der PS-Spanbrecher formt kurze, kontrollierte Späne und verbessert die Spanabfuhr bei wechselnden Schnittbedingungen, wodurch die Prozesssicherheit beim Drehen erhöht wird. Welche Geometrie hat die Platte und wie wirkt sich das aus? Die rhombische Plattenform mit zylindrischem Loch und einem Eckenradius von 0,4 mm bietet mechanische Stabilität und ermöglicht präzise Schnitte bei Außen- und Innendrehen. Ist die Platte mit Standard-ISO-Haltern kompatibel? Ja, die VNMG120404E-PS AH6225 entspricht ISO-Normen; Kompatibilität zum Halter wird durch Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke sichergestellt. Welche Vorteile bietet die PVD-Beschichtung? Die PVD-Beschichtung erhöht die Verschleißfestigkeit der Hartmetall-Schneidkante, verbessert die Standzeit und reduziert Reibung, was zu gleichmäßigeren Bearbeitungsergebnissen führt. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VNMG 120404 AH6235 Wendeplatten - Tungaloy
Take advantage of a PVD‑coated carbide grade designed for rostfreier Stahl and interrupted cuts, combined with a stable SS chipbreaker and ISO compatibility; order this insert directly via Metav Werkzeuge or consult our specialists for application advice. VNMG 120404 AH6235 — ISO turning insert, PVD-coated carbide, Tungaloy A VNMG120404E-SS AH6235 rhombic ISO insert for external and internal turning, engineered for rostfreier Stahl and interrupted‑cut applications ISO turning insert VNMG120404E-SS PVD-coated carbide grade AH6235 Optimised SS chipbreaker for interrupted cuts 35° lead angle, 0.4 mm corner radius Reliable cutting performance for demanding rostfreier Stahl operations The PVD‑coated AH6235 grade brings enhanced toughness and wear resistance where chips and built‑up edge are critical. Designed for machining rostfreier Stahl, the insert offers a balance between edge stability and fracture resistance, which reduces unplanned tool changes and increases productive cutting time. The PVD-coated surface improves adhesion resistance and contributes to more consistent cutting forces, resulting in fewer rejects and steadier cycle times for series production. Geometry and chip control that improve process stability The rhombic form with a 35° lead angle and 0° relief produces a cutting geometry that supports a secure seating in ISO holders and a predictable cutting direction, improving surface finish and dimensional control. The SS chipbreaker is optimised for interrupted cuts and sticky materials; it promotes repeatable chip formation and evacuation, lowering the risk of jamming. A 0.4 mm corner radius provides a compromise between strength and finish, reducing the likelihood of edge chipping in less stable setups. Practical integration and economic advantages Compatibility with ISO holders is dictated by form, clearance, tolerance class, fixing method, size and thickness; the ISO designation VNMG120404E-SS simplifies procurement and tool selection. Using this insert reduces downtime through fewer breakages and longer edge life, which improves overall tool cost per part. For shops processing mixed batches or facing frequent interruptions, the combination of the AH6235 grade and the SS chipbreaker delivers both reliability and predictable maintenance intervals. Guidance for application and safe use Select the cutting parameters and insert seating that match the workpiece stability and machining strategy: lower feeds and conservative depths are recommended when first testing this configuration in new rostfreier Stahl alloys. The insert is suitable for both external and internal turning; pairing with an appropriate outer holder, clamping kit and replacement screws as per ISO standards ensures correct seating and repeatable results. For parameter recommendations and trial setups, operational teams and engineers can request tailored data. For process support or to purchase the VNMG120404E-SS AH6235 insert from Tungaloy, contact Metav Werkzeuge for expert application advice and ordering assistance via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Manufacturer article number: 6903416 SKU: 6903416-Tungaloy Manufacturer SKU: TUN6903416 Brand: Tungaloy Facts ISO designation: VNMG120404E-SS Size: 12 mm Corner radius: 0.4 mm Thickness: 4.76 mm Relief angle: 0° Lead/approach angle: 35° Hole: with cylindrical hole Chipbreaker: SS Special features Cutting material: carbide Coating / grade: AH6235 (PVD-coated) Application: turning — external and internal; interrupted cuts System components: ISO insert, matching external holder or boring bar, shim/clamping set and replacement screws Compatibility criteria: form, free angle, tolerance class, fixing, size and thickness FAQ What materials is this insert best suited for? The VNMG120404E-SS AH6235 is optimised for rostfreier Stahl and performs well in interrupted‑cut conditions, thanks to its PVD‑coated AH6235 grade and SS chipbreaker. Is this insert compatible with standard ISO holders? Yes; the VNMG120404E-SS follows ISO geometry, but compatibility depends on holder form, clearance, tolerance class, fixing and plate thickness—ensure the holder matches these parameters. Which features reduce chipping risk during interrupted cuts? The combination of a tougher AH6235 grade, the SS chipbreaker and a 0.4 mm corner radius helps prevent edge fracture and improves durability in interrupted‑cut applications. Can this insert be used for finishing passes? With its 35° lead angle and 0.4 mm radius, the insert can produce good surface quality; select conservative feeds and adjust cutting conditions for fine finishing runs. What is the manufacturer SKU for ordering? Order using the manufacturer SKU TUN6903416 or the article number 6903416; the full SKU listed is 6903416‑Tungaloy for supplier reference. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMG 120404 AH8015 TM Wendeplatten - Tungaloy
Benefit from the combination of a PVD‑coated AH8015 grade, ISO‑standard geometry and a 0.4 mm corner radius for precise, repeatable turning of heat‑resistant alloys — order directly via Metav Werkzeuge or consult our advisors if clarification is required. VNMG120404E‑TM AH8015 — ISO turning insert for turning applications by Tungaloy A VNMG120404E‑TM AH8015 insert designed for external and internal turning, offering stable cutting edges and optimised chip control for heat‑resistant alloys. PVD‑coated AH8015 grade ISO‑standard rhombic insert, 35° principal angle TM chipbreaker for heat‑resistant alloys 0.4 mm corner radius for precise profiles High‑performance grade for heat‑resistant alloys The AH8015 grade is a PVD‑coated carbide developed as a balanced choice between wear resistance and edge stability. For machining difficult, heat‑resistant materials, this combination reduces flank wear while maintaining a reliable cutting edge, which translates into fewer insert changes and more predictable batch throughput. The PVD coating improves oxidation resistance at elevated temperatures, helping to sustain cutting performance during longer cycles. Stable cutting geometry for consistent results With the rhombic ISO form and a 35° principal angle, the insert provides a predictable contact pattern and good access to external and internal profiles. The TM chipbreaker is optimised for fragmenting chips in tougher alloys, reducing the risk of long, continuous swarf and enabling safer, cleaner machining. The 0.4 mm corner radius supports fine profile definition while retaining sufficient edge strength for interrupted cuts, resulting in improved surface finish and dimensional consistency. Clear compatibility and straightforward set‑up ISO‑standardisation means compatibility depends on matching form, relief angle, tolerance class, fastening and size — the insert fits typical VNMG holders and tooling systems when these parameters align. The rhombic plate with a cylindrical hole ensures simple clamping and positive locating; when combined with the correct external holder and backing shim, set‑up is quick and repeatable. Where uncertainty exists about holder match or tolerance class, refer to holder documentation or contact technical advisors for clarification. Economic machining and application guidance Choosing a balanced grade such as AH8015 brings operational economy: extended tool life in demanding alloys and less frequent index changes lower overall operating costs. The insert is suitable for a broad range of turning operations — from finishing to medium roughing — on heat‑resistant alloys. For best results, pair with stable fixturing, appropriate cutting data for the workpiece material and a coolant strategy that supports thermal control; these measures maximise the benefit of the insert’s wear‑resistant coating and edge stability. For reliable turning of heat‑resistant alloys, contact Metav Werkzeuge for tailored technical advice and to secure the VNMG120404E‑TM AH8015 from Tungaloy — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6947474 Manufacturer SKU: TUN6947474 SKU: 6947474‑Tungaloy Model series: ISO‑turning inserts Material: carbide Grade: AH8015 Coating: PVD Application: turning Core dimensions Corner radius: 0.4 mm Plate thickness: 4.76 mm Inscribed circle / size: 12 mm Principal angle: 35° Clearance angle: 0° Design and special features Rhombic plate geometry TM chipbreaker Cylindrical hole ISO designation: VNMG120404E‑TM PVD‑coated carbide ISO‑standard insert form FAQ What materials is this insert intended for? The VNMG120404E‑TM AH8015 is formulated primarily for machining heat‑resistant alloys; the PVD coating and carbide substrate provide a balanced resistance to wear and good edge stability on such materials. Which chipbreaker is fitted and what is its benefit? This insert uses a TM chipbreaker that promotes short, controllable chips when turning tougher alloys, improving swarf control and reducing the risk of entanglement. How does the 0.4 mm corner radius affect performance? A 0.4 mm corner radius offers a compromise between profile accuracy and edge strength, enabling fine surface finishes while tolerating minor interruptions during cuts. Is the geometry compatible with standard VNMG holders? The insert follows ISO‑standard geometry; compatibility with a holder depends on matching form, clearance angle, tolerance class, fastening and size, so verify these parameters against the chosen external holder. What advantages does the PVD coating provide in practice? The PVD coating on the AH8015 grade improves oxidation resistance and wear behaviour at elevated temperatures, contributing to longer tool life and more consistent cutting performance in demanding turning tasks. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
VNMG 120404 AH8015 Wendeplatten - Tungaloy
Benefit from the balanced wear resistance and edge stability of the PVD‑coated AH8015 grade combined with the PS chipbreaker and a 0.4 mm corner radius for consistent turning performance; order the insert directly via Metav Werkzeuge or consult our technical team for tailored application support. VNMG 120404 AH8015 – ISO turning insert VNMG120404E-PS, PVD-coated carbide, for turning – Tungaloy The VNMG120404E-PS AH8015 is an ISO‑standard rhombic turning insert, PVD‑coated carbide, engineered for reliable external and internal turning of heat‑resistant alloys. PVD‑coated AH8015 grade PS chipbreaker for controlled chips 0.4 mm corner radius for robust edges ISO VNMG 120404 rhombic form Consistent machining with a balanced carbide grade The PVD‑coated AH8015 offers a measured combination of wear resistance and edge stability, making it a first choice for general machining of heat‑resistant alloys. The applied coating increases thermal and abrasive resistance without compromising the cutting edge, so the indexable insert sustains longer productive cuts and fewer tool changes. This balance reduces process interruptions and supports predictable component quality when the material mix or machining cycles demand dependable performance. Precision geometry that improves tool life and component quality Designed in the ISO VNMG geometry, the insert features a 0.4 mm corner radius and a 35° lead angle, with a relief (clearance) angle of 0°. The corner radius strengthens the cutting edge and helps distribute cutting forces, while the rhombic shape allows versatile approach angles for both external and internal turning. Compatibility with the holder is governed by form, relief angle, tolerance class, fixing method, size and thickness, so matching insert and holder ensures repeatable clamping and maximises tool life. Controlled chips and smooth process integration The PS chipbreaker is engineered for stable chip formation across a range of feed rates typical for ISO turning operations. The insert’s cylindrical hole facilitates reliable clamping and quick indexability in standard holders or boring bars. When fitted into a correctly specified tool system — ISO turning plate, matching external holder or boring bar, plus clamp set and retaining screws — the componentry reduces vibration, improves surface finish and lowers the risk of built‑up edge. This system approach supports higher uptime and more consistent part output. Practical application tips for turning operations Intended primarily for turning, the insert performs best when paired with a holder that matches its form, size and thickness; the plate thickness of 4.76 mm and plate size 12 mm are standard dimensions to check during tool selection. Select the AH8015 grade and PS chipbreaker when machining tough, heat‑resistant alloys where a compromise between wear resistance and edge strength is required. For customers new to the grade or changing workpiece materials, a short trial under representative conditions will quickly demonstrate the improved stability and surface quality. Contact Metav Werkzeuge for application advice, sample requests or technical guidance on fitting and optimising the Tungaloy VNMG120404E-PS AH8015 insert to a specific turning setup; our consultants can provide compatibility checks and machining recommendations. Technical Data Article number: 6966304 SKU: 6966304-Tungaloy Manufacturer SKU: TUN6966304 Designation: VNMG120404E-PS AH8015 Brand: Tungaloy Core parameters Size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Lead/approach angle: 35° ISO code: 120404 Hole: cylindrical hole Shape: rhombic Materials & Features Material: carbide Coating: PVD Grade: AH8015 Chipbreaker: PS Application: turning (external and internal) Suited to heat‑resistant alloys System: ISO turning insert; compatible with matched holder, clamp set and replacement screws FAQ What materials is this insert best suited for? The VNMG120404E-PS AH8015 is optimised for heat‑resistant alloys; the AH8015 grade balances wear resistance and edge stability for such materials. How does the PS chipbreaker affect machining? The PS chipbreaker provides controlled chip formation and reduces the risk of long, stringy chips, improving process reliability when using the Tungaloy insert in ISO turning operations. Which holders are compatible with this insert? Compatibility depends on holder form, relief angle, tolerance class, fixing and plate size; use a holder specified for VNMG 120404 inserts with a cylindrical‑hole clamping system. What does the 0.4 mm corner radius mean for part quality? A 0.4 mm corner radius increases edge strength and helps produce a more robust surface finish, reducing the likelihood of edge chipping during interrupted cuts. Is this insert indexable and replaceable during production? Yes, the insert is indexable; the ISO plate design allows rotation or replacement in the holder to restore cutting performance without changing the entire tool body. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
VNMG 120404 AH8015 Wendeplatten - Tungaloy
Benefit from the PVD-coated AH8015 grade and the stable VNMG geometry for consistent, long-running performance in turning applications. The combination of wear resistance, edge stability and ISO compatibility supports productive machining of heat-resistant alloys. Order the VNMG120404E-ZF AH8015 (product) directly via (Metav Werkzeuge) or ask our consultants if needed. VNMG120404E-ZF AH8015 VNMG 120404 Turning Insert — Tungaloy A VNMG120404E-ZF AH8015 rhombic turning insert designed for reliable external and internal turning of heat-resistant alloys, offering PVD-enhanced wear resistance and a ZF chipbreaker for controlled swarf formation. PVD-coated carbide grade AH8015 Optimised for heat-resistant alloys Rhombic VNMG 120404 form, 0.4 mm radius Cylindrical hole mounting, 0° clearance angle Consistent edge life for demanding alloys The PVD film applied to the AH8015 grade provides improved resistance to flank and crater wear, making the insert well suited to machining heat‑resistant alloys. Thanks to the balanced carbide substrate and coating, the cutting edge maintains stable geometry, which reduces the need for frequent index changes and supports higher process reliability. This results in predictable tool life and fewer interruptions in the production sequence. Secure seating and ISO compatibility for flexible use The rhombic form is ISO‑compliant, so compatibility with standard toolholders depends on form, clearance angle and thickness rather than proprietary geometry. The insert’s cylindrical hole and standard mounting dimensions allow straightforward clamping in most VNMG holders, while the 0° clearance setting and 35° wedge angle ensure correct cutting orientation. Such compatibility simplifies tool inventory and speeds setup when changing inserts between machines. Controlled chip formation and improved surface finish Equipped with the ZF chipbreaker, the insert promotes short, controllable chips when turning a wide range of alloys, which reduces chip entanglement and protects delicate workpiece surfaces. The small 0.4 mm corner radius supports fine finishing passes while maintaining sufficient edge strength for light to medium roughing. Overall, the design enhances surface quality and contributes to stable cycle times in serial production. Practical selection and machining advice When choosing the right insert grade and geometry, consider the workpiece alloy, rigidity of the set‑up and feed rates. The VNMG120404E‑ZF AH8015 insert is a versatile choice for general turning of heat‑resistant materials; for higher cutting temperatures or interrupted cuts, evaluate more robust clamping or alternative grades. For application-specific parameters—recommended feeds, speeds and coolant strategy—technical queries can be directed to Metav Werkzeuge by email or phone to ensure the insert matches the machining task. Contact Metav Werkzeuge for tailored application advice on Tungaloy VNMG120404E-ZF AH8015 inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6947450 Manufacturer SKU: TUN6947450 Product designation: VNMG120404E-ZF AH8015 Brand: Tungaloy Application: Turning Core specifications ISO code: 120404 Insert form: VNMG (rhombic) Corner radius: 0.4 mm Clearance angle: 0° Plate thickness: 4.76 mm Plate size: 12 mm Wedge angle: 35° Features & compatibility Coating/grade: AH8015 (PVD) Carbide substrate Chipbreaker: ZF Hole: cylindrical, with hole ISO-compliant insert series Typical use: external and internal turning FAQ What materials are best suited to this insert? The VNMG120404E‑ZF AH8015 insert from Tungaloy is intended for turning heat‑resistant alloys, delivering a balance of wear resistance and edge stability for such materials. Is this insert compatible with standard VNMG holders? Yes, the rhombic VNMG 120404 form and cylindrical hole follow ISO conventions, so it fits standard VNMG toolholders when the holder accepts the VNMG form and the specified thickness. How does the ZF chipbreaker affect machining? The ZF chipbreaker produces shorter, more manageable chips and helps maintain a consistent surface finish during both external and internal turning operations. What cutting geometry parameters are important for setup? Key parameters include the 0° clearance angle, 35° wedge angle and the 0.4 mm corner radius; these influence cutting direction, contact length and final surface quality. Can this insert be used for finishing and light roughing? Yes, the 0.4 mm corner radius and stable edge geometry make the insert suitable for finishing and light to medium roughing passes in appropriate material and setup conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMG 120404 AH8015 Wendeplatten - Tungaloy
VNMG120404E-TF AH8015 ISO-Drehwendeschneidplatte von Tungaloy für Drehen Die VNMG120404E-TF AH8015 ist eine ISO-genormte Drehwendeschneidplatte zur effizienten Bearbeitung hitzebeständiger Legierungen beim Außen- und Innendrehen VNMG120404E-TF AH8015 von Tungaloy PVD-beschichtetes Hartmetall für lange Standzeit Eckenradius 0,4 mm für präzise Konturtreue Spanformer TF für stabile Spanbildung bei Legierungen Rhombische Form, Freiwinkel 0° und zylindrisches Loch Produktive Zerspanung durch ausgewogene Schneidstoffwahl Die Kombination aus PVD-beschichtetem Hartmetall und der Sorte AH8015 bietet eine ausgeglichene Balance zwischen Verschleißfestigkeit und Schneidkantenstabilität. Dadurch lassen sich Bearbeitungszeiten reduzieren und Stillstandszyklen verlängern, was die Wirtschaftlichkeit in der Serienfertigung erhöht. Für Betriebe, die hitzebeständige Legierungen bearbeiten, bedeutet das planbare Werkzeugkosten und konstante Prozesslaufzeiten. Passgenauigkeit und Systemkompatibilität für den Halter ISO-Genormtheit gewährleistet, dass Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke auf passende Außenhalter oder Bohrstangen abgestimmt werden können. Der Eckenradius 0,4 mm sorgt für saubere Kantenausbildung, während der Freiwinkel 0° die Geometrie stabilisiert. Der Spanformer TF unterstützt die Spanabfuhr bei instabilen Werkstoffen und trägt so zur Standzeitverbesserung bei. Zielgruppe und typische Anwendungen Konzipiert ist die Platte für das präzise Außen- und Innendrehen in Lohnfertigung und Produktion, insbesondere bei hitzebeständigen Legierungen. Anwender wie Zerspanungsbetriebe, Maschinenbauer und Fertigungsingenieure profitieren von der robusten Schneidkante und der einfachen Austauschbarkeit innerhalb ISO-konformer Systeme. Bei Bedarf ermöglicht die standardisierte Bauweise schnelle Rüstarbeit und minimiert Maschinenstillstand. Empfehlung: Für wirtschaftliche und zuverlässige Bearbeitung hitzebeständiger Legierungen die VNMG120404E-TF AH8015 von Tungaloy einsetzen und bei technischen Fragen Metav Werkzeuge kontaktieren: info@metav-werkzeuge.com · +49 2822 7131930 Produktmerkmale Artikelnummer: 6947429 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VNMG120404E-TF AH8015 SKU Hersteller: TUN6947429 Daten Eckenradius: 0,4 mm Plattendicke: 4,76 mm Plattengröße: 12 Winkel: 35° Freiwinkel: 0° Besonderheiten Material: Hartmetall Beschichtung: AH8015 (PVD-beschichtet) Plattenform: rhombisch Spanbrecher: TF – spanformer für stabile Spanbildung Lochstil: zylindrisches Loch Anwendung: Drehen ISO-Bezeichnung: VNMG120404E-TF FAQ Was zeichnet die Sorte AH8015 aus? Die Sorte AH8015 ist ein PVD-beschichteter Schneidstoff, der für die allgemeine Bearbeitung hitzebeständiger Legierungen entwickelt wurde; die VNMG120404E-TF AH8015 bietet dadurch ein ausgewogenes Verhältnis von Verschleißfestigkeit und Kantenstabilität. Für welche Werkstoffe ist diese Wendeschneidplatte geeignet? Die VNMG120404E-TF AH8015 ist primär für hitzebeständige Legierungen vorgesehen; durch die PVD-Beschichtung eignet sich die Platte zudem gut für eine breite Werkstoffabdeckung in der Serienbearbeitung. Wie beeinflusst der Eckenradius die Bearbeitung? Ein Eckenradius von 0,4 mm sorgt bei der VNMG120404E-TF AH8015 für präzise Konturtreue und reduziert das Risiko von Kantenausbrüchen bei anspruchsvollen Konturen. Wie wird die Kompatibilität mit dem Halter sichergestellt? Die ISO-Genormtheit der VNMG120404E-TF AH8015 erlaubt die sichere Auswahl passender Außenhalter oder Bohrstangen anhand von Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke. Wann ist der Spanformer TF die richtige Wahl? Der Spanformer TF empfiehlt sich, wenn bei der Bearbeitung hitzebeständiger Legierungen stabile Spanbildung und sichere Spanabfuhr erforderlich sind, um Standzeiten und Oberflächenqualität zu optimieren. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VNMG 120404 AH8015 Wendeplatten - Tungaloy
High cutting-edge stability and a balanced wear resistance-to-toughness ratio make the VNMG120404E-TSF AH8015 an excellent choice for general turning of heat-resistant alloys. The ISO geometry and cylindrical hole deliver straightforward clamping and repeatable positioning in standard holders. Order the insert via Metav Werkzeuge or consult our technical advisors for holder and clamping recommendations. VNMG120404E-TSF AH8015 ISO turning insert for external and internal turning — Tungaloy The VNMG120404E-TSF AH8015 is an ISO-standard rhombic turning insert designed for general-purpose machining of heat-resistant alloys, combining a PVD surface and a TSF chipbreaker for controlled chip formation. *PVD-coated carbide grade AH8015 *35° lead angle for versatile machining *0° clearance for robust cutting stability *Cylindrical hole for secure clamping Greater productivity through balanced grade and coating The PVD-coated carbide grade AH8015 offers a compromise between wear resistance and edge stability, intended as a first choice for the general machining of heat-resistant alloys. The protective PVD layer reduces adhesive wear and improves life under elevated temperatures, which translates into fewer tool changes and more consistent cycle times. As a result, the machining process benefits from improved uptime and predictable tool consumption. Geometry that secures stable cuts and repeatable set-up A 35° lead angle and 0° clearance combine with the rhombic profile to provide a stable cutting action and attractive surface quality in both external and internal turning operations. The insert’s 0.4 mm radius and 4.76 mm thickness support both light finishing passes and moderate roughing when the machine set-up is rigid. The cylindrical hole and ISO conformity mean compatibility is determined by holder form, free angle, tolerance class, fastening, size and thickness, enabling straightforward integration into existing tool systems. Chip control, selection guidance and system considerations The TSF chipbreaker is optimised for predictable chip segmentation in the intended material class; selecting the chipbreaker and grade to match workpiece material, operation and machine stability delivers the best results. Typical system components include the ISO insert, a matched external holder or boring bar, a backing/clamp set and replacement screws. For applications where the workpiece or process is uncertain, trial cuts under defined parameters are recommended and Metav Werkzeuge can advise on feeds, speeds and the correct clamping accessories. Contact Metav Werkzeuge to confirm holder compatibility and integrate the VNMG120404E-TSF AH8015 into production; advisors are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss application details and supply options. Technical data Article number: 6947441 Manufacturer article number: 6947441 SKU: 6947441-Tungaloy Manufacturer: Tungaloy Material: Hartmetall Model series: ISO-Drehwendeschneidplatten Facts Radius: 0.4 mm Lead/handing angle: 35° Clearance angle: 0° Thickness: 4.76 mm Plate size: 12 ISO designation: 120404 Hole: with hole (cylindrical) Chipbreaker: TSF Special features PVD-coated carbide Grade AH8015 For general machining of heat-resistant alloys Rhombic plate form ISO-standard turning insert Compatibility depends on holder form, clearance, tolerance class, fastening, size and thickness System components: insert, holder/boring bar, backing/clamp set, replacement screws FAQ What materials is this insert intended for? The VNMG120404E-TSF AH8015 is intended primarily for the general machining of heat-resistant alloys; the AH8015 grade balances wear resistance and edge stability for these materials. Which holders are compatible with this ISO insert? Compatibility is determined by holder form, free angle, tolerance class, fastening method, size and plate thickness; the VNMG120404E-TSF requires a matching ISO holder for correct clamping. How does the TSF chipbreaker affect machining? The TSF chipbreaker promotes controlled chip segmentation and evacuation for the target material class, aiding process stability and surface finish when feed and speed are set correctly. Can this insert be used for both external and internal turning? Yes, the insert geometry and 35° lead angle make it suitable for both external and internal turning applications when used with the appropriate holder. Is replacement hardware required when changing inserts? Standard practice is to inspect the backing/clamp set and screws; the VNMG120404E-TSF operates within established ISO clamping systems, but replacement screws or a new clamp may be needed depending on condition. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMG 120404 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide durability, a 0.4 mm corner radius for precise finishes, and ISO compatibility to maintain a stable turning process; order the insert directly via Metav Werkzeuge or consult our specialists for tailored advice. VNMG120404E-PM AH8015 indexable turning insert — PVD-coated carbide, 0.4 mm radius for general turning (Tungaloy) VNMG120404E-PM AH8015 is an ISO-format indexable insert designed for external and internal turning, optimised for heat-resistant alloys and general-purpose machining. ISO form VNMG120404 for standard holders PVD-coated carbide AH8015 for heat-resistant alloys 0.4 mm corner radius for versatile finishing Cylindrical hole for secure clamping Reliable cutting performance for heat-resistant alloys The VNMG120404E-PM insert offers a robust mix of wear resistance and edge stability thanks to its PVD-coated carbide grade AH8015. The coating reduces flank wear during elevated-temperature operations, which helps to extend tool life and maintain dimensional accuracy over longer tool cycles. In practical machining terms, this leads to fewer tool changes and more predictable component tolerances, making the insert a dependable choice for workshops handling alloyed steels and other heat-resistant materials. The combination of coating and substrate balances toughness and hardness, so the insert remains resilient under interrupted cuts while still delivering a consistent surface finish. Precision geometry that supports repeatable results With a 0.4 mm corner radius and a rhomboid ISO form, the insert provides controlled cutting forces and good edge strength for finishing and medium turning. The 0° clearance angle and a 35° lead angle ensure a stable engagement with the workpiece, reducing chatter and promoting smooth chip flow when the correct PM chipbreaker is selected for the application. The rhomboid shape and cylindrical hole guarantee reliable clamping in standard holders, while the 4.76 mm thickness contributes to mechanical stiffness; together these features support repeatable quality across batch production and one-off jobs alike. Compatibility and system integration for efficient workshop use This insert complies with ISO sizing, so compatibility with matching external holders, boring bars and clamping sets is determined by shape, relief angle, tolerance class, mounting method, size and thickness. The insert forms part of a complete system: insert, appropriate holder or boring bar, backing plate or clamping kit, and replacement screws. Specifying the correct PM chipbreaker and grade AH8015 for the workpiece material and machining stability yields the best productivity gains. Where high cutting speeds are needed, the PVD layer moderates wear, enabling consistent cycle times and reduced process variation. Practical advantages for production planning and tool management Using ISO-standard inserts simplifies inventory and tool-change procedures: fewer special parts, straightforward holder selection and clear replacement criteria based on measured wear. The insert’s balance of wear resistance and edge strength reduces the likelihood of unexpected failures, supporting continuous production. For maintenance teams, the clear geometry and ISO code make ordering replacements and matching spare parts uncomplicated, while the PVD coating and carbide substrate provide reliable life expectancy when operated within recommended cutting parameters. Contact Metav Werkzeuge to specify the right Tungaloy VNMG120404E-PM AH8015 insert for the intended turning application, confirm holder compatibility and arrange delivery or technical consultation Technical Data Article number: 6966327 Facts Manufacturer SKU: TUN6966327 Size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Lead angle: 35° Hole: with cylindrical hole Special features Material: Carbide Coating: PVD Grade: AH8015 Chipbreaker: PM Shape: rhomboid Application: Turning FAQ What materials is this insert best suited for? The VNMG120404E-PM AH8015 insert is intended primarily for heat-resistant and alloyed materials; the PVD-coated AH8015 grade balances wear resistance and edge strength for general turning. How does the 0.4 mm corner radius affect surface finish? A 0.4 mm corner radius helps achieve a fine surface finish while maintaining edge stability; for delicate finishing passes, the smaller radius reduces cutting forces and improves dimensional control with this Tungaloy insert. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO dimensions (VNMG120404 form), so compatibility depends on matching holder geometry, mounting method and tolerance class rather than on the insert alone. What chipbreaker is supplied and when should it be used? This item features the PM chipbreaker; it is suited for general turning where controlled chip formation is required, especially with alloyed or heat-resistant workpiece materials. Can this insert be used for internal and external turning? The VNMG120404E-PM is suitable for both external and internal turning operations when paired with the correct external holder or boring bar and matched cutting parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMG 120404 AT9530 TSF Wendeplatten - Tungaloy
Take advantage of the ISO‑standard geometry and the AT9530 coated cermet grade for reliable finishing and light turning of steel; order directly via Metav Werkzeuge or request advice from our technical consultants for holder compatibility and process optimisation. VNMG120404E-TSF AT9530 VNMG 120404 ISO turning insert for finishing by Tungaloy VNMG120404E-TSF AT9530 is a rhombic, ISO‑standard turning insert designed for finishing and light turning operations in steel, offering a consistent wear pattern and a focus on surface quality. ISO-compatible VNMG geometry Coated cermet grade AT9530 TSF chipbreaker for even chips Rhombic insert with cylindrical hole Consistent finishing and improved surface quality The insert is optimised for finishing and light stock removal, combining a coated cermet substrate with a chipbreaker that promotes stable, predictable chip formation. This results in a noticeably improved surface finish while reducing the risk of built‑up edge. The engineered edge preparation and the corner radius 0.4 help distribute cutting forces evenly, which supports longer tool life and repeatable part quality in serial production. Compatibility with holders and simple assembly Built to the ISO designation, the insert fits standard VNMG holders when matched by form, clearance, tolerance class, fastening method, size and thickness. The rhombic geometry and the cylindrical hole ensure secure clamping; use the appropriate underlay or clamping kit and replacement screws for a reliable setup. Clear instructions in the system description explain how the insert, holder and clamping components combine to maintain process stability. Material behaviour and process benefits The AT9530 grade focusses on low and even wear when machining steel, yielding consistent dimensional accuracy over runs. Thanks to the TSF chipbreaker, chip control is improved during finishing cuts, reducing interruptions and clean‑up time. The insert’s 35° angle and ISO‑compliant form support controlled cutting conditions, helping to achieve higher productivity with predictable maintenance intervals. Contact Metav Werkzeuge for a compatibility check or application recommendation for this Tungaloy finishing insert and receive expert guidance for integration into existing turning tools Technical data Article number: 6773725 Manufacturer SKU: TUN6773725 SKU: 6773725-Tungaloy Label: VNMG120404E-TSF AT9530 ISO designation: VNMG120404E-TSF Core data Corner radius: 0.4 mm Plate thickness: 4.76 mm Plate size: 12 mm Clearance angle: 0° Main angle: 35° Hole style: cylindrical (with hole) Grade: AT9530 Special features Coated cermet grade AT9530 TSF chipbreaker Rhombic plate form ISO‑standard turning insert Intended application: turning (finishing, light turning of steel) Compatibility depends on holder form, clearance, tolerance, fastening, size and thickness System components: insert, external holder or boring bar, underlay/clamping kit, replacement screws FAQ What machining tasks is this insert best suited for? The VNMG120404E-TSF AT9530 is intended for finishing and light turning of steel, where a coated cermet grade and the TSF chipbreaker support superior surface finish and even wear. Which holders are compatible with this ISO insert? Compatibility is determined by the holder’s form, clearance angle, tolerance class, fastening method, plate size and thickness; the VNMG120404E-TSF can be fitted into standard VNMG holders when these parameters match. How does the TSF chipbreaker affect performance? The TSF chipbreaker provides controlled chip formation during finishing cuts, improving chip evacuation and contributing to consistent cutting forces and reduced interruptions with the AT9530 grade. What is the corner radius and why does it matter? This insert has a corner radius of 0.4 mm, which balances edge strength and the ability to produce fine surface finishes with small radial depths of cut. Is this insert suitable for heavy roughing? The VNMG120404E-TSF AT9530 is designed for finishing and light machining; it is not primarily intended for heavy roughing where more robust geometries and different grades would be preferable. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMG 120404 GT9530 Wendeplatten - Tungaloy
Take advantage of a wear-resistant coated cermet grade and an optimised TSF chipbreaker for consistent finishing and extended tool life in steel turning; the geometry and ISO conformity ensure reliable clamping and repeatability in production. Order the insert directly via Metav Werkzeuge or ask our consultants if needed. VNMG 120404 GT9530 – Indexable turning insert (coated cermet, TSF chipbreaker) by Tungaloy VNMG120404E-TSF GT9530 is an ISO-standard rhombic indexable insert for turning applications, designed for finishing to light general-purpose cuts in steel where surface quality and longer life are required Coated cermet grade GT9530 Optimised TSF chipbreaker for steel Rhombic VNMG, 12 mm inscribed circle 0.4 mm corner radius for fine finish Consistent finishing and prolonged tool life for steel turning The insert’s coated cermet composition (grade GT9530) is engineered for stable wear behaviour during finishing and light general-purpose turning of steel. A cermet combines ceramic hardness with metallic toughness, which helps to maintain a sharp cutting edge and deliver a superior surface finish compared with conventional carbide grades under stable machining conditions. The result is fewer in-process reworks and a more predictable production rhythm, supporting efficient batch runs and higher first-pass quality. Reliable chip control and thermal stability under steady feed conditions Equipped with the TSF chipbreaker, the geometry promotes controlled chip formation and evacuation in typical finishing feeds. The chipbreaker reduces the risk of entangling long chips and supports steady cutting forces, which in turn helps to protect the insert edge and the workpiece surface. Thermal resistance of the coated cermet also contributes to edge stability at moderate cutting speeds, so surface integrity and dimensional accuracy remain consistent throughout the tool life. Geometry and ISO conformity simplify tool selection and clamping The rhombic VNMG form with a 35° approach angle and a 0.4 mm corner radius is a common geometry that fits a broad range of ISO-compatible holders. ISO conformity of form, clearance angle, size and thickness ensures that the insert can be matched to holders by specification rather than trial, reducing setup time. The central cylindrical hole and standard thickness facilitate secure fastening and repeatable positioning, which is crucial for serial production and quick insert changes. Integration into production workflows and material suitability This insert is intended primarily for turning of steel under stable, finish-oriented conditions; the coated cermet grade is optimised for wear resistance and surface quality rather than heavy interrupted cuts. Selection of feeds, speeds and holder rigidity should reflect the insert’s strengths: light to moderate depths of cut with stable machine and work-holding yield the best combination of surface finish and tool life. For uncertain cases, match the TSF chipbreaker and GT9530 grade to the workpiece material and process stability for optimal results. For application advice or to secure VNMG 120404 GT9530 inserts from Tungaloy, contact Metav Werkzeuge directly for consultation and availability at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6750973-Tungaloy Manufacturer SKU: TUN6750973 Manufacturer article number: 6750973 Label: VNMG120404E-TSF GT9530 Model series: ISO-Drehwendeschneidplatten Facts ISO code: 120404 Inscribed circle: 12 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Approach angle: 35° Special features Coated cermet grade GT9530 Chipbreaker TSF Rhombic plate form (VNMG) Cylindrical hole Compatible with ISO turning holders Application: turning Substrate: cemented carbide FAQ What materials is this insert suited for? The VNMG120404E-TSF GT9530 is formulated for machining steel, offering wear-resistant performance and good surface quality in finishing operations. How does the TSF chipbreaker affect machining? The TSF chipbreaker on the VNMG120404E-TSF GT9530 promotes controlled chip formation and evacuation, improving process stability and protecting the cutting edge during finishing cuts. Can this insert be used in standard ISO holders? Yes, the insert adheres to ISO dimensions (120404) and fits ISO-compatible VNMG holders when matched by form, thickness and fastening specifications. What cutting parameters are recommended for best surface finish? For finishing with the GT9530 coated cermet insert, use moderate cutting speeds and light depths of cut with steady feeds and a rigid setup to exploit the grade’s strength in surface finish and tool life. What identifiers should be quoted when ordering? Please reference VNMG120404E-TSF GT9530, SKU 6750973-Tungaloy or Manufacturer SKU TUN6750973 when enquiring or ordering. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMG 120404 NS9530 TF Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing performance, low cutting forces and ISO compatibility for stable turning results; order the insert directly via Metav Werkzeuge or consult the team for application support. VNMG120404E-TF 120404 NS9530 turning insert by Tungaloy The VNMG120404E-TF NS9530 is a rhombic, ISO‑standard indexable insert designed for precision external and internal turning, optimised for continuous cuts and fine finishing. Uncoated cermet grade for fine finishing ISO rhombic insert with 0° clearance Cylindrical hole for secure clamping Precision surface finish with low cutting forces The uncoated cermet NS9530 is engineered for consistently high surface quality in finishing operations. Its sharp cutting edge and tailored chip control deliver low cutting forces, which reduces vibration and supports repeatable dimensional accuracy on delicate components. For applications that demand fine finishes at small depths of cut, this insert offers an efficient balance between form stability and cut control, resulting in fewer rework cycles and improved throughput. Stable machining and material adaptability Built on a cemented carbide body and featuring a TF chipbreaker, this insert provides reliable chip formation in continuous cutting. The geometry—rhombic with an included angle of 35° and a clearance angle of 0°—helps maintain cutting stability while the 0.4 mm corner radius contributes to controlled edge strength and predictable tool life. For turning applications where low forces and consistent results matter, this configuration supports productive machining of many steels with an emphasis on finishing passes and small feed rates. Practical compatibility and handling benefits As an ISO‑standard item, the insert fits common external holders and boring bars when matched by form, size and thickness. The insert thickness of 4.76 mm, inscribed size 12 mm and the cylindrical hole simplify clamping and replacement routines, while the TF chipbreaker eases chip evacuation in continuous cuts. The product is intended for turning (external and internal) and is a suitable choice where reliable edge sharpness and excellent surface finish are priorities in short, precision operations. For tailored application advice or to request this Tungaloy turning insert (SKU TUN6797245), contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — consultants will confirm compatibility and delivery options Technical data Article number: 6797245 Manufacturer SKU: TUN6797245 SKU: 6797245-Tungaloy Model series: ISO-Drehwendeschneidplatten Brand: Tungaloy Core data Insert designation: VNMG120404E-TF ISO code: 120404 Edge radius: 0.4 mm Thickness: 4.76 mm Size (inscribed circle): 12 mm Clearance angle: 0° Included angle: 35° Hole style: cylindrical Materials & features Uncoated cermet grade NS9530 Cemented carbide construction Rhombic insert form TF chipbreaker For turning: external and internal Designed for continuous cutting and small depths FAQ What materials is this insert intended for? The VNMG120404E-TF NS9530 is an uncoated cermet finishing grade developed primarily for machining steels and is optimised for continuous cuts and small depths of cut. How does the TF chipbreaker influence performance? The TF chipbreaker on this Tungaloy turning insert improves chip formation and evacuation during continuous turning, which supports stable cutting and a consistent surface finish. Which holders are compatible with this ISO insert? Compatibility is determined by form, clearance, tolerance class, fastening, size and thickness; the ISO designation and rhombic form allow use with standard ISO holders and bore bars when matched to these parameters. What are the key geometric values to check before fitting? Confirm the insert designation VNMG120404E-TF, inscribed size 12 mm, thickness 4.76 mm, edge radius 0.4 mm, clearance 0° and the cylindrical hole to ensure correct seating and clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMG 120404 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing, low cutting forces and ISO compatibility for consistent production results; order the insert directly via Metav Werkzeuge or contact our consultants for application advice. VNMG 120404 NS9530 VNMG120404E-PS — ISO rhombic turning insert for turning by Tungaloy The VNMG120404E-PS NS9530 is an ISO rhombic turning insert for finishing operations, engineered for low cutting forces and a high-quality surface finish in steel turning applications. Uncoated cermet NS9530 for fine finishing Sharp cutting edge with low cutting forces 0.4 mm nose radius for precise contours Rhombic ISO VNMG form with cylindrical hole High-quality finishing with a low-force cutting grade The uncoated cermet grade NS9530 delivers a consistently sharp cutting edge that reduces cutting forces and improves surface integrity in finishing passes. Designed for continuous cutting and small depths of cut, this insert promotes stable machining conditions and predictable dimensional results. The combination of a fine-grain cermet microstructure and an optimised cutting geometry supports superior surface finish on steel while keeping tool-induced vibrations to a minimum. Geometry and dimensions tuned for precision and compatibility The rhombic VNMG geometry and the standard ISO designation ensure broad compatibility with conventional external holders and boring bars; compatibility is defined by form, 0° clearance, tolerance class, clamping method, size and thickness. With a 0.4 mm nose radius and a plate thickness of 4.76 mm, the insert balances edge strength with the ability to produce fine detail. The central cylindrical hole provides secure fixation and repeatable positioning in standard clamping systems. Practical system setup and selection guidance A productive cutting system consists of the insert together with a matching external holder or boring bar, a shim or clamping set, and replacement screws. Selecting the correct PS chipbreaker and the NS9530 grade according to workpiece material, machining type and machine stability is essential for efficiency: choose this finishing grade where continuous cuts and low feed depths are predominant to exploit the low cutting forces and obtain consistent part quality. Material scope and recommended applications Engineered primarily for steel finishing, the insert is intended for both external and internal turning where surface quality and dimensional control are priorities. The cermet composition is particularly suited to stable setups and continuous cutting conditions; when paired with the correct holder and cutting data, it enables reliable, high-quality finishing of turned parts with reduced burr formation and improved surface integrity. Contact Metav Werkzeuge for tailored application advice and availability of the Tungaloy VNMG120404E-PS NS9530 turning insert; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6966305 Manufacturer SKU: TUN6966305 Label: VNMG120404E-PS NS9530 Model series: ISO-Drehwendeschneidplatten Core data Shape/size: rhombic, 12 mm Plate thickness: 4.76 mm Nose radius: 0.4 mm Clearance angle: 0° Design angle: 35° Material: Hartmetall Special features Grade: NS9530 (uncoated cermet) Chipbreaker: PS Hole: with hole, cylindrical hole Typical application: Drehen (turning) System components: insert, external holder/boring bar, shim/clamping set, replacement screws ISO standardised turning insert FAQ What is the primary application for this insert? The VNMG120404E-PS NS9530 is designed for finishing in turning operations, especially external and internal turning where a high surface finish on steel is required. Is the NS9530 grade coated or uncoated? The NS9530 grade supplied with the VNMG120404E-PS is an uncoated cermet, chosen for a sharp cutting edge and low cutting forces. Which chipbreaker does the insert use, and what is it suitable for? This insert features the PS chipbreaker, which is suitable for continuous cuts and small depths of cut typically encountered in finishing operations. How does the 0.4 mm nose radius affect machining results? A 0.4 mm nose radius provides a balance between edge strength and the ability to produce precise contours, contributing to improved surface quality and dimensional accuracy in finishing passes. How is compatibility with holders ensured? Compatibility is determined by the insert form, 0° clearance, tolerance class, clamping method, size and thickness; the VNMG geometry is ISO-standard and fits standard VNMG holders when these parameters match. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMG 120404 NS9530 Wendeplatten - Tungaloy
VNMG120404E-TSF NS9530 Drehwendeschneidplatte für Drehen von Tungaloy Die VNMG120404E-TSF NS9530 ist eine ISO-genormte rhombische Drehwendeschneidplatte, entwickelt für Schlichtanwendungen im Stahldrehen mit Fokus auf hohe Oberflächengüte und niedrige Schnittkräfte ISO-genormt und rhombisch ausgeführt Unbeschichtetes Cermet für feine Schlichtschnitte Zylindrisches Loch für sichere Befestigung Eckenradius 0,4 mm für feine Kantenqualität Freiwinkel 0° und Plattendicke 4,76 mm Höchste Oberflächengüte bei Schlichtschnitt und Dauerleistung Die VNMG120404E-TSF NS9530 bietet dank des unbeschichteten Cermet-Schneidstoffs eine besonders scharfe Schneidkante, die niedrige Schnittkräfte und gleichbleibend feine Oberflächen erzeugt. Durch die Kombination aus Eckenradius 0,4 mm und präziser Plattengeometrie lassen sich Konturen mit minimaler Nachbearbeitung erreichen. Für Betriebe, die auf Reproduzierbarkeit und Zeitersparnis angewiesen sind, bedeutet das weniger Stillstand und höhere Teilequalität bei Serien- und Einzelteilfertigung. Kompatibilität, Handhabung und Prozesssicherheit Die Plattenserie ist ISO-genormt und passt zu Haltern, deren Form, Freiwinkel, Befestigung und Toleranzklasse kompatibel sind. Die rhombische Plattenform mit zylindrischem Loch gewährleistet eine sichere Positionierung im Halter und einfache Wechselzyklen. Anwender profitieren von klarer Teilelogistik und unkomplizierter Ersatzteilversorgung. Bei Nutzung passender Halter und stabiler Aufspannung trägt die Geometrie zur konstanten Spanbildung und damit zu planbaren Standzeiten bei. Zielgruppe, Anwendung und wirtschaftlicher Nutzen Diese Wendeschneidplatte richtet sich an Fertigungsbetriebe und Lohnbearbeiter, die Schlichtanwendungen im Stahldrehen optimieren wollen. Die Sorte NS9530 ist speziell für kontinuierliche Schnitte mit kleinen Zustellungen entwickelt und bietet deshalb einen wirtschaftlichen Vorteil bei hohen Anforderungen an Oberflächengüte. Anlagenbetreiber erreichen durch geringeren Nacharbeitsaufwand und längere Zerspanintervalle niedrigere Stückkosten und bessere Auslastung der Maschinen. Für hochwertige Schlichtbearbeitung im Stahl empfehlen wir die Verwendung der VNMG120404E-TSF NS9530 von Tungaloy – bei Rückfragen steht die technische Beratung per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 gern zur Verfügung. Produktmerkmale Artikelnummer: 6750972 Hersteller: Tungaloy Modellserie: ISO-Drehwendeschneidplatten Bezeichnung: VNMG120404E-TSF Sorte: NS9530 Hersteller SKU: TUN6750972 Fakten Eckenradius: 0,4 mm Winkel: 35° Freiwinkel: 0° Plattendicke: 4,76 mm Plattengröße: 12 mm Besonderheiten Material: Hartmetall Schneidstofftyp: unbeschichtetes Cermet Plattenform: rhombisch Lochstil: zylindrisches Loch Mit Loch Spanbrecher: TSF (für feine Schlichtschnitte) Anwendung: Drehen Einsatzbeschreibung: Schlichtsorte für Stahl, kontinuierlicher Schnitt, kleine Zustellungen FAQ Welche Werkstoffe eignen sich für diese Wendeschneidplatte? Die VNMG120404E-TSF NS9530 von Tungaloy ist primär für Stahl ausgelegt; die Sorte NS9530 wurde als Schlichtsorte entwickelt und liefert bei Stahl sehr gute Oberflächengüten. Ist die Platte beschichtet oder unbeschichtet? Die VNMG120404E-TSF NS9530 verwendet unbeschichtetes Cermet als Schneidstoff, was besonders scharfe Kanten und geringe Schnittkräfte ermöglicht. Welchen Eckenradius hat die Platte und was bedeutet das für das Bauteil? Die Platte hat einen Eckenradius von 0,4 mm; das führt zu feinen Kanten und reduziert den Nachbearbeitungsaufwand bei Schlichtschnitten. Welche Halter sind kompatibel mit dieser Plattengeometrie? Kompatible Halter müssen Form, Freiwinkel, Befestigungsart, Größe und Dicke der Platte entsprechen; die ISO-Genormung der VNMG-Serie erleichtert die Zuordnung zu gängigen Außenhaltern. Für welche Bearbeitungsart ist der Spanbrecher TSF ausgelegt? Der Spanbrecher TSF ist für feine Schlichtschnitte optimiert und fördert eine stabile Spanform bei kontinuierlichen Schnitten in Stahl. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com