VNMA 120404 T515 Wendeplatten - Tungaloy
Take advantage of CVD-coated carbide performance and ISO compatibility to improve cycle times and maintain stable chip formation during turning; the combination of a 0.4 mm corner radius and T515 grade offers a balance of edge strength and economical wear behaviour. Order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. VNMA 120404 T515 ISO turning indexable insert for turning — Tungaloy The VNMA120404E T515 is an ISO-standard indexable insert designed for general external and internal turning operations, optimised for economical machining of cast iron and compatible with standard ISO holders. CVD-coated carbide grade T515 Optimised for cast iron machining ISO rhombic insert, 12 mm size 0.4 mm corner radius for balanced edge strength Increased productivity through a CVD-coated carbide grade The combination of a CVD-coated cemented carbide substrate and the T515 grade provides reliable wear resistance and consistent cutting behaviour under typical turning conditions. This enables longer tool life compared with uncoated grades and supports higher cutting speeds where machine and setup stability allow. For shops prioritising throughput and predictable regrind intervals, the coated substrate helps maintain a stable cutting edge and reduces unplanned tool changes, which in turn supports leaner production workflows. Compatibility and mounting for assured fit and function Manufactured to ISO dimensions, the insert is an indexable rhombic plate with a 12 mm nominal size, 4.76 mm thickness and a cylindrical centre hole, so compatibility with clamping systems depends on form, clearance angle, tolerance class, fixing method, size and thickness of the holder. The specified 0° clearance angle and the insert geometry require a matching external holder or boring bar designed for rhombic plates; using the correct holder ensures correct rake, support and repeatable positioning. For process planning, confirm holder compatibility and tolerance class to avoid misfits and to secure the expected cutting performance. Practical machining benefits and selection guidance A 0.4 mm corner radius offers a compromise between edge robustness and form accuracy: it increases edge strength for interrupted cuts while still delivering acceptable surface finish on most cast iron grades. The insert has no preformed chipbreaker, so chip control should be achieved via grade selection, cutting parameters and coolant strategy; the T515 grade is tuned for economical cast iron cutting where moderate feed rates and steady chip evacuation are typical. When choosing inserts for specific operations, consider workpiece material, rigidity and desired surface finish; selecting an appropriate chip control solution or a matching insert geometry will safeguard process reliability and part quality. Contact Metav Werkzeuge for personalised application advice and fast supply of Tungaloy VNMA120404E T515 turning inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 for technical guidance and availability Technical data Article number: 6760170 SKU: 6760170-Tungaloy Manufacturer SKU: TUN6760170 Facts Grade/designation: T515 Material: cemented carbide Coating: CVD Corner radius: 0.4 mm Thickness: 4.76 mm Size: 12 mm Clearance angle: 0° Insert geometry angle: 35° Special features ISO rhombic insert form With cylindrical centre hole No chipbreaker Intended application: turning Model series: ISO turning indexable inserts FAQ What materials is this insert best suited to machine? The VNMA120404E T515 insert is optimised for cast iron machining; the T515 grade and CVD coating balance wear resistance and economy for that material. Does the insert require a specific holder type? Compatibility is achieved with ISO-standard holders for rhombic inserts; the plate’s form, 0° clearance angle, thickness and central cylindrical hole determine the required holder configuration. How does the 0.4 mm corner radius affect performance? A 0.4 mm corner radius increases edge strength for interrupted cuts and prolongs edge life while maintaining reasonable surface finish for most turning operations. Is a chipbreaker included with this insert? This insert is supplied without a chipbreaker, so chip control must be managed through grade selection, cutting parameters and appropriate coolant or external chip-control measures. Can this insert be used for internal turning as well as external operations? Yes; the ISO geometry and central hole allow use in suitable external holders and boring bars for internal and external turning where the insert size and holder clearance permit. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMA 120408 T515 Wendeplatten - Tungaloy
The combination of CVD-coated cemented carbide, a rhombic 12 mm geometry and a 0.8 mm corner radius ensures reliable performance in cast iron turning and simple integration into ISO tool systems; order the insert directly via Metav Werkzeuge or contact the consultants for tailored cutting data. VNMA120408E T515 ISO turning insert — rhombic 12 mm, CVD-coated carbide by Tungaloy VNMA120408E T515 is an ISO‑standard turning insert designed for economical external and internal turning of cast iron using compatible ISO holders and boring bars. CVD-coated carbide grade T515 Designed for efficient cast iron turning Rhombic insert, 12 mm size, 35° lead angle Cylindrical hole for secure clamping Consistent geometry for stable turning and predictable results The rhombic insert shape with a 35° lead angle and a 0.8 mm corner radius provides a predictable cutting edge for both roughing and light finishing passes. These geometry choices reduce cutting forces in interrupted cuts and improve tool life by distributing wear over a defined edge length. The 0° clearance specification supports close control of the tool–workpiece engagement, while the rhombic form helps maintain accessibility in both external and internal turning. For engineers seeking reproducible surface quality, the defined geometry translates into fewer reworks and a more stable process. Coating and grade designed for economical cast iron machining The T515 grade is a CVD‑coated cemented carbide developed for cost‑efficient machining of cast iron materials. The chemical vapour deposition layer provides thermal resistance and maintains a sharp cutting edge under typical grey and nodular cast iron conditions, promoting consistent cutting speeds and extended tool life. When matched to a stable set‑up and appropriate cutting parameters, the coated substrate reduces the need for frequent insert changes and supports higher productivity levels without compromising surface finish. System compatibility and secure clamping for reliable handling As an ISO‑standard insert, compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness. This insert features a cylindrical hole for positive location and reliable clamping in compatible holders, a plate thickness of 4.76 mm and a 12 mm plate size, which align with many common ISO toolholders and boring bars. The package concept includes the ISO insert, matching outer holder or boring bar, shims/clamping sets and spare screws in typical systems, enabling straightforward replacement and inventory management in production environments. Practical application guidance to improve process efficiency Use this insert primarily for external and internal turning of cast iron, selecting the appropriate chipbreaker and grade according to stability and the presence of interrupted cuts. For less rigid set‑ups, favour conservative cutting depths and reduced feed rates to protect the edge; in stable conditions higher cutting speeds can be exploited thanks to the CVD coating. The insert’s design supports predictable chip flow when a matching chip control geometry is chosen, contributing to shorter cycle times and reduced machine downtimes for tool changes. Contact Metav Werkzeuge for specific cutting data, stock availability and tailored application advice on the Tungaloy VNMA120408E T515 turning insert — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 6760171 SKU: 6760171-Tungaloy Manufacturer SKU: TUN6760171 Model series: ISO‑turning inserts ISO designation: 120408 Designation: VNMA120408E Label: VNMA120408E T515 Facts Corner radius: 0.8 mm Plate size: 12 mm Plate thickness: 4.76 mm Lead angle: 35° Clearance angle: 0° Hole: with hole Special features Material: cemented carbide Coating: CVD Grade: T515 Plate shape: rhombic Hole style: cylindrical hole Intended for: external and internal turning System components: ISO insert, compatible outer holder or boring bar, shims/clamping set, spare screws FAQ What materials is this insert optimised for? The T515 grade is optimised for machining cast iron; the CVD‑coated cemented carbide substrate supports efficient cutting of grey and nodular cast irons. Which holders are compatible with the VNMA120408E insert? Compatibility is determined by form, clearance angle, tolerance class, fastening, size and thickness; the VNMA120408E fits ISO‑compliant holders that accept a rhombic 12 mm insert with a cylindrical hole. What is the purpose of the cylindrical hole in the insert? The cylindrical hole provides positive location and secure clamping when used with matching screws and clamping sets, improving repeatability in tool changes. Is there a chipbreaker on this insert? This designation is supplied without an integrated chipbreaker; chip control should be achieved by selecting an appropriate holder geometry or a matching chip control insert variant. How does the T515 coating affect cutting parameters? The CVD coating increases thermal resistance and edge stability, allowing for productive cutting speeds in cast iron while maintaining acceptable tool life and surface finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
VNMA 160402 TH10 Wendeplatten - Tungaloy
Take advantage of a sharp, uncoated carbide grade that supports low cutting forces and clean finishes, combined with ISO‑compliant geometry for reliable toolholding. Order the VNMA160402 TH10 turning inserts via Metav Werkzeuge or contact our advisers for application support. VNMA 160402 TH10 ISO turning insert — uncoated carbide, 0.2 mm corner radius — Tungaloy The VNMA160402 TH10 is a rhombic ISO turning insert designed for external and internal turning of non‑ferrous materials and similar applications Uncoated carbide grade TH10 Rhombic insert, 16 mm size 0.2 mm corner radius 0° clearance angle, 35° lead angle Optimised grade for low cutting forces and clean surfaces The sharp TH10 grade is an uncoated carbide formulation developed for applications where a keen cutting edge reduces cutting forces and enhances surface quality. For turning of non‑ferrous materials, the sharp edge geometry supports stable chip formation and lowers the tendency for built‑up edge, which in turn reduces rework and finishing time. This makes the insert particularly suited to operations requiring a fine surface finish without relying on coating layers. ISO compliance and secure clamping for predictable performance Designed to the ISO series standards, the insert’s compatibility with a holder is determined by form, clearance angle, tolerance class, clamping and the insert’s size and thickness. The rhombic geometry with a 16 mm nominal size and 4.76 mm thickness is combined with a cylindrical hole for positive indexing and repeatable seating. The 0° clearance angle and 35° approach/lead angle are optimised to balance cutting action and tool engagement, enabling predictable behaviour across matched holder systems. Practical system build and production benefits In normal workshop practice the insert is used as part of a modular system: ISO insert, matching external holder or boring bar, a locating shim/clamp set and replacement screws. This modularity simplifies inventory and reduces changeover time. The 0.2 mm corner radius provides a compromise between edge strength and fine finishing capability, helping to extend the usable edge life while maintaining dimensional control in turning operations. For shops focused on throughput and consistent results, this combination supports efficient, repeatable machining cycles. For detailed application advice or to request availability of the VNMA160402 TH10 from Tungaloy, contact Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — consultants are available to assist with holder compatibility and cutting‑edge selection. Technical data Article number: 6809411 Manufacturer SKU: TUN6809411 Label: VNMA160402 TH10 Model series: ISO turning inserts Material: Carbide Manufacturer: Tungaloy Facts Insert designation: VNMA160402 Grade: TH10 (uncoated) Corner radius: 0.2 mm Size: 16 mm Thickness: 4.76 mm Clearance angle: 0° Lead/approach angle: 35° Hole: with hole (cylindrical) Special features Rhombic plate form No chipbreaker fitted Intended application: Turning Typical system components: insert, holder, shim/clamp, screws FAQ What materials are best suited to this insert? The VNMA160402 TH10 insert is optimised for non‑ferrous materials and similar workpiece classes; the uncoated edge supports low cutting forces and clean surface results. Is the cutting edge coated? No, the TH10 grade supplied for the VNMA160402 is an uncoated carbide grade designed to provide a sharp edge where coatings are not required. How is the insert mounted in the holder? The insert uses a cylindrical hole and is clamped with a matching shim/clamp set; compatibility is determined by form, clearance angle, tolerance class, clamping and insert size. What does the 0.2 mm corner radius mean for machining? A 0.2 mm corner radius offers a balance between edge strength and surface finish, helping to maintain dimensional control while supporting extended edge life in many turning tasks. Which tooling system components are needed to build a working setup? A typical system comprises the ISO insert, a matched external holder or boring bar, a locating shim/clamp set and spare screws, as indicated for the VNMA160402 TH10. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMA 160404 NS520 Wendeplatten - Tungaloy
Benefit from the VNMA160404 NS520’s combination of consistent surface finish, reliable edge life and ISO compatibility for streamlined turning processes; order the insert directly via Metav Werkzeuge or consult our tooling specialists for application-specific advice. VNMA160404 NS520 turning insert (ISO VNMA 160404) by Tungaloy — Cermet finishing grade, 0° relief VNMA160404 NS520 is an ISO-indexable turning insert designed for finishing and light machining of steel, offering precise geometry and compatibility with standard VNMA holders. ISO rhombic insert VNMA 160404 Cermet grade NS520 for finishing Radius 0.4 mm for fine detail 0° relief angle, 35° cutting angle Precision finishing and consistent surface quality The VNMA160404 NS520 insert is optimised for finishing to light machining, where surface finish and dimensional precision are decisive. The cermet-based composition reduces built-up edge and promotes steady wear, delivering stable part geometry across a production run. As a result, finishing passes achieve improved visual and metrological outcomes with fewer interventions, which supports predictable downstream processes and reduces rework. Predictable clamping and ISO interchangeability Compatibility follows ISO norms for indexable plates: form, size, thickness and locating features determine holder fit and repeatability. The rhombic ISO shape, cylindrical hole and standard mounting thickness enable straightforward replacement in matching VNMA external holders or boring bars. The geometry—including the 0° relief angle and 35° cutting angle—ensures repeatable seating and controlled cutting engagement for predictable toolpath planning and part consistency. Material behaviour and wear control Manufactured as a coated Cermet (NS520) on a robust carbide substrate, the insert emphasises surface integrity and even edge recession rather than aggressive metal removal. This composition supports stable chip formation when machining steel, prioritising fine finishes and dimensional stability in light-turning operations. The absence of an integrated chipbreaker means the grade focuses on finish quality; chip control is managed via appropriate holder geometry and cutting parameters. System considerations and application guidance Intended for both external and internal turning, the plate performs best in finishing and light turning applications when combined with a matched holder, a suitable shim/clamping kit and correct tightening elements. The system setup—insert, holder, underlay and fastening—determines vibration resistance and reproducible results. For workshops seeking to integrate the plate into existing tooling stocks, compatibility checks against holder form, clearance and tolerance class are recommended to preserve clamping integrity and machining stability. Contact Metav Werkzeuge for tailored tooling recommendations, application matching and rapid supply — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6809412 Manufacturer SKU: TUN6809412 SKU: 6809412-Tungaloy Designation: VNMA160404 NS520 Facts Grade: NS520 Material: carbide (cermet/coated cermet) Corner radius: 0.4 mm Thickness: 4.76 mm Size: 16 mm Relief angle: 0° Cutting angle: 35° Design features Rhombic shape (VNMA) Cylindrical locating hole ISO-indexable plate For turning: finishing to light machining No integrated chipbreaker FAQ What applications suit this cermet insert best? The VNMA160404 NS520 is intended primarily for finishing and light turning of steel, where surface quality and dimensional control are priorities. Is the insert compatible with standard VNMA holders? Yes — the ISO VNMA form, thickness and locating hole permit use in matching VNMA external holders and boring bars when the holder accepts the VNMA 160404 geometry. What does the NS520 grade offer compared with conventional carbide? NS520 is a cermet/coated cermet grade optimised for surface finish and consistent wear, giving the insert advantages in finishing passes over some standard carbide grades. Can this insert be used for internal turning? The insert is suitable for both external and internal turning when installed in an appropriate holder or boring bar designed for ISO VNMA plates. What is the manufacturer SKU for ordering and reference? The manufacturer SKU is TUN6809412 and the article number is 6809412 for the VNMA160404 NS520 insert by Tungaloy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMA 160404 T5105 Wendeplatten - Tungaloy
Take advantage of the combination of high‑speed performance, CVD wear resistance and ISO compatibility to keep turning cycles productive and repeatable; order through Metav Werkzeuge or request technical guidance from our consultants for seamless integration. VNMA160404 T5105 indexable insert — ISO rhombic turning insert for cast-iron, CVD-coated carbide — Tungaloy VNMA160404 T5105 is an ISO‑format indexable insert for external and internal turning, engineered for high‑speed machining of cast iron under stable set‑up conditions. VNMA160404 geometry, ISO standard CVD-coated carbide grade T5105 0.4 mm nose radius for fine finishes Cylindrical-hole design for secure clamping High-speed cast-iron performance for longer tool life The CVD-coated cemented carbide in grade T5105 is formulated for wear resistance during elevated cutting speeds when machining cast iron. This provides predictable tool life and consistent surface quality under stable machining conditions. The coating layer reduces abrasive wear and helps maintain the cutting edge for longer intervals, which translates into fewer indexings and reduced tool costs per part. The result is improved process efficiency and a steadier surface finish on turned components. Precise fit in ISO turning systems reduces set-up errors As an ISO‑compliant rhombic insert, the geometry and dimensions determine compatibility with holders and bars. Match the insert form, clearance angle (0°), tolerance class, fastening method, size and thickness to the chosen toolholder to ensure correct seating. The rhombic outline with a 35° lead angle and a 0.4 mm nose radius balances edge strength with finish capability: a smaller radius refines surface quality while still offering adequate edge stability for finishing passes. The cylindrical hole ensures secure clamping and reliable repeatability in production environments. System integration and practical handling to reduce downtime The insert is intended to be used as part of a system: the ISO insert plus a corresponding external holder or boring bar, a clamp/shim set and replacement screws. No chipbreaker is supplied with this grade, so select an appropriate chip control geometry for the workpiece and cut conditions if required. Correct seating, clean contact surfaces and recommended tightening torque minimise vibration and promote consistent cutting performance. Proper matching of insert grade and toolholder reduces rework, shortens cycle times and supports predictable, productive turning operations. For tailored advice on integrating the VNMA160404 T5105 into production or for availability and delivery times, please contact Metav Werkzeuge for technical consultation and order support. Technical data Article number: 6850332 SKU: 6850332-Tungaloy Manufacturer item no.: 6850332 Model series: ISO-Drehwendeschneidplatten Manufacturer: Tungaloy Application: Turning Numbers / core technical data ISO designation: 160404 Size: 16 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 0° Lead/approach angle: 35° Designs / special features Material: cemented carbide Coating: CVD Grade: T5105 Plate form: rhombic Hole: with cylindrical hole Chipbreaker: without FAQ What materials is the VNMA160404 T5105 suited for? The VNMA160404 T5105 is designed primarily for high‑speed machining of cast iron; the CVD‑coated carbide grade T5105 provides wear resistance suited to stable turning conditions. How does the 0.4 mm nose radius affect surface finish and strength? A 0.4 mm nose radius improves surface finish by reducing scallop height during finishing passes while maintaining sufficient edge strength for controlled cutting when the set‑up is rigid. Is a chipbreaker included with this insert? This insert is supplied without a chipbreaker; chip control should be achieved by selecting a compatible holder or an alternate chipbreaker geometry when required. Which toolholders are compatible with this ISO insert? Compatibility is determined by form, clearance angle, tolerance class, fastening, size and thickness; use an ISO‑compatible external holder or boring bar sized for the VNMA160404 geometry. What is the plate thickness and how does it influence choice of holder? The plate thickness is 4.76 mm; ensure the chosen holder accepts this thickness and secures the insert correctly to maintain repeatable cutting performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMA 160404 T5115 Wendeplatten - Tungaloy
VNMA 160404 T5115 ISO-Drehwendeschneidplatten für Drehen von Gusseisen — Tungaloy Die VNMA160404 T5115 ist eine ISO-genormte Drehwendeschneidplatte für Außen- und Innendrehen, konzipiert für prozesssichere Bearbeitung von Gusseisen. Universalsorte für Gusseisen mit guter Standzeit CVD-beschichtetes Hartmetall für stabile Schneidkante Rhombische Platte 16 mm, Eckenradius 0.4 mm Mit zylindrischem Loch für standardisierte Halterbefestigung Hohe Standzeit durch CVD-Beschichtung und Hartmetall Die Kombination aus CVD-Beschichtung und Hartmetall sorgt für ein ausgewogenes Verhältnis von Verschleißfestigkeit und Schneidkantenstabilität. Dadurch sinken Stillstandszeiten und Werkzeugkosten, weil seltener gewechselt werden muss. Die Sorte T5115 wurde gezielt als Universalsorte für Gusseisen entwickelt und bietet zuverlässige Performance bei wechselnden Prozessbedingungen. ISO-Genormtes System für einfache Werkzeugintegration Wechselhalter und Bohrstangen lassen sich dank ISO-Genormung und klarer Form- und Toleranzvorgaben unkompliziert kombinieren. Achten auf Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke sichert Wiederholgenauigkeit. Das macht Einbau, Austausch und Lagerhaltung effizienter und reduziert Rüstzeiten in der Werkstatt. Präzision und Oberflächengüte bei schlichter Geometrie Der kleine Eckenradius 0.4 mm ermöglicht saubere Oberflächen bei Schlicht- und Halbschnittanwendungen, während das Fehlen eines integrierten Spanbrechers Flexibilität bei der Spanbildung bietet. Die rhombische Form und das Winkel 35°-Profil unterstützen stabile Schneidbedingungen, besonders beim Außen- und Innendrehen von Bauteilen aus Gusseisen. Empfehlung: Für wirtschaftliche und prozesssichere Zerspanung von Gusseisen empfehlen wir die VNMA160404 T5115 von Tungaloy; bei technischen Fragen oder Beratungsbedarf erreichen Sie Metav Werkzeuge per E‑Mail info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 Produktmerkmale Artikelnummer: 6850333 Hersteller: Tungaloy Serie: ISO-Drehwendeschneidplatten Typenbezeichnung: VNMA160404 T5115 Hersteller SKU: TUN6850333 Daten Plattengröße: 16 mm Plattendicke: 4,76 mm Eckenradius: 0,4 mm Winkel: 35° Freiwinkel: 0° Besonderheiten Material: Hartmetall Beschichtung: CVD (chemische Gasphasenabscheidung) Sorte: T5115 — Universalsorte für Gusseisen Spanbrecher: ohne Loch: mit Loch Lochstil: zylindrisches Loch Anwendung: Drehen FAQ Für welche Werkstoffe ist die VNMA160404 T5115 geeignet? Die VNMA160404 T5115 von Tungaloy ist primär für Gusseisen ausgelegt; die Sorte T5115 bietet ausgeglichene Verschleißfestigkeit und Schneidkantenstabilität für produktive Bearbeitung. Welche Vorteile bringt die CVD-Beschichtung bei dieser Platte? Die CVD-Beschichtung erhöht die Verschleißfestigkeit und stabilisiert die Schneidkante der VNMA160404 T5115, was zu längeren Standzeiten und konstanteren Ergebnissen führt. Wie beeinflusst der Eckenradius 0,4 mm die Bearbeitungsergebnisse? Ein Eckenradius von 0,4 mm verbessert die Oberflächengüte bei Schlichtvorgängen und ermöglicht präzisere Konturen, besonders bei feineren Schnittparametern. Passt die Platte in handelsübliche Halterungen? Ja, die ISO-Genormung und das zylindrische Loch der VNMA160404 T5115 sichern die Kompatibilität mit gängigen Außenhaltern und Bohrstangen, sofern Form, Größe und Befestigung abgestimmt sind. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VNMA 160404 T5125 Wendeplatten - Tungaloy
VNMA 160404 T5125 — ISO-Drehwendeschneidplatte zum Drehen von Tungaloy Die VNMA 160404 T5125 ist eine ISO-genormte Drehwendeschneidplatte für Außen- und Innendrehen, konzipiert für zähe Gusseisenmaterialien bei unterbrochenem Schnitt und weniger stabilen Bearbeitungsbedingungen. ISO-genormte rhombische Plattenform CVD-beschichtetes Hartmetall T5125 für Gusseisen Zähere Sorte für unterbrochene Schnitte Zylindrisches Loch für sichere Befestigung Eckenradius 0,4 mm für präzisen Schnitt Wirtschaftliche Schneidstoffkombination für robuste Anwendungen Die VNMA 160404 T5125 kombiniert einen Hartmetall-Träger mit einer CVD-beschichtung, die speziell für die Zerspanung von Gusseisen entwickelt wurde. Diese Kombination sorgt für stabile Spanbildung und verlängerte Standzeiten bei instabilen Schnittbedingungen. Anwender profitieren von geringeren Stillstandszeiten und vorhersehbarer Werkzeuglebensdauer, weil die Sorte T5125 zäher ausgelegt ist und Einfrierungen an der Schneidkante reduziert. Präzision und Prozesssicherheit beim Drehen Mit einem Eckenradius von 0,4 mm und einer Plattendicke von 4,76 mm liefert die Platte konstante Schnittgeometrien und reproduzierbare Ergebnisse. Das rhombische Plattenformat mit zylindrischem Loch erleichtert die Indexierung und sorgt für zuverlässige Befestigung am Außenhalter. Diese Eigenschaften erhöhen die Prozesssicherheit und unterstützen eine gleichbleibende Oberflächengüte bei variierenden Maschinenbedingungen. Zielgruppe und typische Einsatzfälle Entwickelt für Fertigungsbetriebe und Lohnbearbeiter, die Außen- und Innendrehzyklen an Gussbauteilen ausführen, eignet sich die Platte besonders bei instabiler Aufspannung oder unterbrochenen Schnitten. Techniker und Produktionsplaner finden hier eine wirtschaftliche Lösung, um Ausstoß zu steigern, Nacharbeit zu reduzieren und die Werkzeugbestückung klar nach Werkstoff und Schnittbedingungen zu strukturieren. Kompatibilität, Montage und Auswahlhinweise Die Kompatibilität richtet sich nach Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke des Halters. Achten auf passende Halter mit 35° Einbaulage und Freiwinkel 0° für optimale Geometrieübertragung. Bei der Auswahl des Spanbrechers ist zu berücksichtigen, dass diese Ausführung ohne Spanbrecher geliefert wird; Spanformer sind werkstoff- und bearbeitungsabhängig zu wählen. Die Modellserie gehört zur Gruppe ISO-Drehwendeschneidplatten und ist Teil eines Systems aus Platte, Außenhalter, Unterlage und Befestigungselementen. Empfehlung: Für prozesssichere Gusseisenbearbeitung die VNMA 160404 T5125 von Tungaloy einsetzen und bei technischen Fragen Metav Werkzeuge kontaktieren unter info@metav-werkzeuge.com oder +49 2822 7131930 Produktmerkmale Artikelnummer: 6850334 Hersteller: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VNMA160404 T5125 Hersteller Artikelnummer: 6850334 SKU: TUN6850334 Daten Eckenradius: 0,4 mm Plattendicke: 4,76 mm Plattengröße: 16 mm Winkel: 35° Freiwinkel: 0° Besonderheiten Material: Hartmetall Beschichtung: T5125 Schneidstofftyp: CVD-beschichtetes Hartmetall Sorte: T5125 Plattenform: rhombisch Lochstil: zylindrisches Loch Spanbrecher: ohne Anwendung: Drehen Modellserie: ISO-Drehwendeschneidplatten Wendeplattenbezeichnung: VNMA160404 FAQ Für welche Werkstoffe ist die VNMA 160404 T5125 besonders geeignet? Die VNMA 160404 T5125 von Tungaloy ist speziell für die Bearbeitung von Gusseisen konzipiert; die CVD-beschichtung und die zähere Sorte T5125 sorgen für stabile Spanbildung bei unterbrochenem Schnitt. Wie beeinflusst der Eckenradius die Oberflächenqualität? Der Eckenradius von 0,4 mm ermöglicht präzise Schneidkanten und trägt zur konstanten Oberflächengüte bei; die VNMA 160404 T5125 bietet dadurch reproduzierbare Ergebnisse bei Serienfertigung. Brauche ich einen speziellen Halter für diese Platte? Die Kompatibilität hängt von Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke ab; ein Halter mit passender Einbaulage 35° und geeigneter Spannvorrichtung gewährleistet optimale Performance der VNMA160404 T5125. Ist die Platte mit Spanbrechern lieferbar? Diese Ausführung wird ohne Spanbrecher geliefert; für gezielte Spanformung ist ein passender Spanformer entsprechend Werkstoff und Bearbeitungsart separat zu wählen. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VNMA 160404 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp, uncoated cemented carbide TH10 grade, a precise 0.4 mm corner radius, and ISO compatibility for reliable turning performance; order the inserts via Metav Werkzeuge or consult our experts for application guidance. VNMA160404 TH10 ISO turning insert for turning — Tungaloy The VNMA160404 TH10 is an ISO‑standard, rhombic turning insert designed for external and internal turning, optimised for non‑ferrous materials and operations that benefit from an uncoated cutting edge. Uncoated cemented carbide TH10 grade Rhombic 16 mm insert with 0.4 mm radius Cylindrical hole for secure clamping Improved cutting behaviour for non‑ferrous materials The combination of an uncoated cemented carbide substrate and the sharp TH10 grade provides low cutting forces and reduces the tendency for built‑up edge when machining non‑ferrous alloys. This results in improved process stability and a cleaner surface finish, particularly where minimal cutting forces are essential. The insert geometry supports consistent performance in operations where chip control is achieved through machine stability and suitable coolant rather than through a dedicated chipbreaker. Secure clamping and geometry that supports repeatability The rhombic 16 mm format with a cylindrical hole and standard ISO interface ensures compatibility with many commercial holders; compatibility is determined by form, clearance angle, tolerance class, clamping and thickness. With a 0° clearance angle and a 4.76 mm plate thickness, the insert provides robust seating and repeatable location, reducing vibration and the risk of seating errors. This mechanical certainty simplifies tool setup and contributes to consistent part quality across production runs. Precise edge preparation for surface quality and tool life A 0.4 mm corner radius balances edge strength and surface finish: the small radius lowers cutting forces and improves dimensional accuracy on fine turning operations, while still offering sufficient edge stability for routine light to medium cuts. The uncoated cutting edge promotes predictable wear characteristics for materials that do not demand specialised coatings, supporting straightforward reconditioning or replacement strategies and predictable cycle planning. System considerations and practical recommendations This insert is part of an ISO insert system that should be used with a matching external holder or boring bar, plus the appropriate underlay/clamp set and spare screws. Select holders and clamping components that match the insert form and tolerance class to maintain the specified seat and minimise chatter. For materials and operations outside typical non‑ferrous applications, consider pairing the insert with a different grade or a chipbreaker adapted to the workpiece and machine rigidity to optimise productivity. For tailored advice on using the VNMA160404 TH10 from Tungaloy in production, or to secure supply through Metav Werkzeuge, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for precise application support and availability. Technical data Article number: 6809415 Manufacturer SKU: TUN6809415 Label: VNMA160404 TH10 SKU: 6809415-Tungaloy Facts Insert designation: VNMA160404 Size: 16 mm Thickness: 4.76 mm Corner radius: 0.4 mm Cutting angle: 35° Clearance angle: 0° Special features Material: cemented carbide Grade: TH10 (uncoated) Plate shape: rhombic Hole: with cylindrical hole Chipbreaker: none Application: turning (external and internal) System components: compatible holder, underlay/clamp set, replacement screws Typical use: non‑ferrous materials, low cutting force operations FAQ What materials is this insert designed to machine? The VNMA160404 TH10 insert is designed primarily for non‑ferrous materials and applications where an uncoated edge supports low cutting forces and a clean surface finish. How does the TH10 grade affect cutting performance? The TH10 uncoated grade provides a sharp cutting edge with predictable wear behaviour, which helps reduce cutting forces and maintain surface quality when using the VNMA160404 TH10 in appropriate materials. Which holder type is required for this insert? The insert requires a compatible ISO‑standard holder or boring bar with the correct form, tolerance class and clamping arrangement to match the VNMA160404 geometry and ensure secure seating. Is there a chipbreaker on the insert? This VNMA160404 version is supplied without a chipbreaker, so chip control should be achieved via process parameters, holder geometry and machine stability. Can this insert be used for internal turning? Yes, the rhombic form and the specified geometry make the insert suitable for both external and internal turning applications when matched with an appropriate boring bar. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMA 160408 NS520 Wendeplatten - Tungaloy
Benefit from the NS520 cermet’s focus on surface finish and consistent wear together with the standardized VNMA geometry for straightforward integration into ISO toolholder systems; order the VNMA 160408 NS520 directly via Metav Werkzeuge or consult our advisors for application-specific recommendations. VNMA 160408 NS520 ISO turning insert by Tungaloy — cermet grade for finishing, 0.8 mm corner radius VNMA 160408 NS520 is an ISO rhombic turning insert engineered for finishing to light machining of steel and compatible with standard ISO holders for external and internal turning operations Rhombic ISO insert VNMA160408 NS520 Cermet grade NS520 for finish machining 0.8 mm corner radius for superior surface quality Cylindrical central hole, 35° approach angle Consistent surface quality from a cermet designed for finishing The NS520 grade is a cermet formulation optimised for the final passes on steel where surface finish and dimensional accuracy are primary concerns. Its composition promotes uniform wear, which reduces variation between successive inserts and helps maintain process stability during serial production. For finishing cuts, the combination of the fine-grain cermet and the specified corner radius delivers lower cutting forces and improved part appearance compared with standard grades. This makes the insert particularly suitable for applications where tight tolerances and reliable repeatability are required. ISO geometry and holder compatibility for predictable integration The rhombic VNMA form follows ISO standards and is supplied in the 16 mm size with a plate thickness of 4.76 mm, facilitating straightforward matching with ISO external holders or boring bars. Compatibility is determined by insert form, clearance angle (0°), tolerance class, fastening method, size and thickness. The central cylindrical hole and the standard fixing arrangement support secure clamping and repeatable seating. When selecting the matching holder and clamp set, ensure the toolholder geometry accepts the 35° approach angle and the 0.8 mm corner radius for optimal results. Practical benefits in everyday turning operations Designed for turning, both external and internal, the insert performs best in finishing to light machining of steel where improved surface integrity is required. The 0.8 mm corner radius balances edge strength with the ability to produce fine surface finishes; a larger radius can increase tool life while maintaining form on the workpiece. The absence of a chipbreaker on this grade emphasises a smooth cutting edge and is suited to stable machining conditions and controlled chip evacuation; select cutting parameters and coolant strategy that match the material and setup to exploit these advantages. System approach and ease of maintenance The recommended system comprises the ISO turning insert, a compatible external holder or boring bar, a shim/clamp set and replacement screws for maintenance. Using standardized components simplifies stockkeeping and reduces downtime during tool changes. The insert’s carbide substrate provides robust edge support, while the cermet coating characteristics focus on finishing performance; replacement is straightforward and repeatability is assured through the standardized seat and fastener arrangement. For serial production, this combination promotes predictable tool life and consistent part quality. For fast procurement or application advice on the VNMA 160408 NS520 from Tungaloy, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and ordering assistance Technical data Article number: 6809416 Manufacturer SKU: TUN6809416 SKU: 6809416-Tungaloy Model series: ISO-Drehwendeschneidplatten Label: VNMA160408 NS520 Core dimensions Size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Approach/lead angle: 35° Special features Material: carbide Grade: NS520 (cermet) Plate shape: rhombic Central hole: cylindrical Chipbreaker: none Typical application: external and internal turning; finishing to light machining of steel System components: ISO insert, matching holder/boring bar, shim/clamp set, replacement screws Compatibility determined by: form, clearance angle, tolerance class, fastening, size and thickness FAQ What material is the insert best suited for? The VNMA 160408 NS520 is formulated as a cermet grade optimised for steel finishing and light machining where surface quality and dimensional control are crucial. Will the insert fit existing ISO VNMA holders? Compatibility depends on holder geometry and tolerance class; the VNMA 160408 NS520 matches holders designed for 16 × 4.76 mm rhombic inserts with a cylindrical central hole and a 35° approach angle. Does this insert include a chipbreaker? This variant is supplied without a chipbreaker, which offers a smooth cutting edge suited to stable finishing operations; machining parameters and chip control should be adapted accordingly. How does the 0.8 mm corner radius affect performance? A 0.8 mm corner radius increases edge strength relative to finer radii and helps achieve a consistent surface finish while offering improved wear resistance on finishing passes. Which SKU identifies this exact item? The product is listed as SKU 6809416-Tungaloy and carries the manufacturer article number 6809416 for clear identification. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMA 160408 T5105 Wendeplatten - Tungaloy
VNMA160408 T5105 – ISO-Drehwendeschneidplatte für Drehen | Tungaloy VNMA160408 T5105 ist eine ISO-genormte Drehwendeschneidplatte aus CVD-beschichtetem Hartmetall, ausgelegt für die Hochgeschwindigkeitsbearbeitung von Gusseisen unter stabilen Schnittbedingungen Wendeschneidplatte ISO-genormt, rhombisch Hartmetall mit CVD-Beschichtung, hohe Standzeit Speziell für Hochgeschwindigkeitsbearbeitung von Gusseisen Zylindrisches Loch für sichere Befestigung Eckenradius 0,8 mm für feine Oberflächen Produktivität steigern durch stabile Schneidkante Die T5105-Sorte kombiniert CVD-beschichtetes Hartmetall mit einer robusten Schneidkante, was zu gleichbleibender Werkzeugleistung bei hohen Schnittgeschwindigkeiten führt. Diese Kombination reduziert Werkzeugwechsel und Stillstandzeiten und sorgt so für eine messbare Steigerung der Produktivität in Serienprozessen. Für Anwender, die Gusseisen effizient zerspanen möchten, bedeutet das weniger Rüstzeiten und konstantere Bauteilqualität. Präzise Anpassung an Halter und Einspannung Das ISO-Format und die Geometrie der VNMA160408 ermöglichen eine einfache Passung zu gängigen Außenhaltern und Bohrstangen. Der Freiwinkel 0° und das rhombische Plattenformat gewährleisten reproduzierbare Lage und Schnittbedingungen; das zylindrische Loch sorgt für sichere Befestigung. Durch diese Konstruktion wird die Prozessstabilität erhöht und die Wiederholgenauigkeit bei Serienringen und mehrachsigen Bearbeitungen verbessert. Materialfokus: Effiziente Bearbeitung von Gusseisen Die Sorte T5105 ist speziell für die Bearbeitung von Gusseisen optimiert und bietet durch die Beschichtung eine verbesserte Verschleißfestigkeit. Anwender profitieren von sauberer Spanabfuhr und geringerer Gratbildung, was die Nacharbeit reduziert. Die Kombination aus Plattendicke 4,76 mm, Eckenradius 0,8 mm und der Sortenwahl liefert eine ausgewogene Mischung aus Standzeit und Oberflächengüte. Anwendungsempfehlung und Zielgruppe Die Platte eignet sich besonders für Betriebe mit stabiler Aufspannung und vorwiegendem Außen- und Innendrehen von Gussbauteilen. Fertigungsleiter und Zerspanungsfachkräfte, die auf konstante Ergebnisse und niedrige Stückkosten achten, finden in dieser Wendeschneidplatte ein wirtschaftliches Werkzeug. Für flexible Fertigungszellen empfiehlt sich die Kombination mit passenden ISO-Außenhaltern und einem Klemmsatz zur schnellen Montage. Wirtschaftlichkeit und Prozesssicherheit Durch die hohe Standzeit und die optimierte Schneidstoffzusammensetzung sinken Werkzeug- und Maschinenlaufkosten. Die VNMA160408 T5105 trägt zur Prozesssicherheit bei, weil sie konstante Schnittbedingungen liefert und damit Ausschuss reduziert. Für produzierende Unternehmen ergibt sich ein klarer betriebswirtschaftlicher Vorteil bei mittel- bis großserienfertigung. Kaufen Sie die VNMA160408 T5105 von Tungaloy über Metav Werkzeuge und sichern Sie sich höhere Prozesssicherheit bei der Gusseisen-Bearbeitung – bei Fragen: info@metav-werkzeuge.com, +49 2822 7131930 Technische Daten Artikelnummer: 6850340 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Hersteller SKU: TUN6850340 Fakten Eckenradius: 0,8 mm Winkel: 35° Plattendicke: 4,76 mm Plattengröße: 16 mm Besonderheiten Material: Hartmetall Beschichtung: CVD-beschichtet Sorte: T5105 (verschleißfest, für Hochgeschwindigkeitsbearbeitung von Gusseisen) Form: rhombisch Loch: mit Loch, zylindrisches Loch Freiwinkel: 0° Einsatz: Drehen Spanbrecher: ohne FAQ Welche Werkstoffe sind für die VNMA160408 T5105 empfohlen? Die VNMA160408 T5105 von Tungaloy ist primär für Gusseisen ausgelegt; die CVD-Beschichtung verbessert die Verschleißfestigkeit bei Hochgeschwindigkeitsbearbeitung. Welche Halter passen zur VNMA160408 T5105? ISO-konforme Außenhalter und Bohrstangen, die das rhombische Format und die Plattendicke 4,76 mm aufnehmen, sind geeignet; auf korrekte Freiwinkel- und Toleranzklasse-Abstimmung achten. Wie beeinflusst der Eckenradius 0,8 mm das Bearbeitungsergebnis? Der Eckenradius 0,8 mm liefert eine feine Oberflächengüte und reduziert Gratbildung, eignet sich daher für Präzisionsoberflächen bei Gussbauteilen. Welche Vorteile bietet die CVD-Beschichtung der Sorte T5105? Die CVD-Beschichtung der T5105 sorgt für höhere Verschleißfestigkeit und stabile Schneidkanteneigenschaften, was zu längeren Standzeiten und konstanteren Ergebnissen führt. Ist die VNMA160408 T5105 für Innen- und Außenbearbeitung geeignet? Ja, die ISO-geometrie erlaubt sowohl Außen- als auch Innendrehen; Anpassung der Schnittparameter und Wahl des passenden Halters sind entscheidend. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VNMA 160408 T5115 Wendeplatten - Tungaloy
Benefit from a reliable combination of CVD-coated carbide performance and standard ISO compatibility for uninterrupted turning operations; the universal T5115 grade delivers a balanced mix of wear resistance and edge stability for cast-iron work, while Metav Werkzeuge can advise on holder pairing and availability. VNMA 160408 T5115 ISO turning insert — CVD-coated carbide, 0.8 mm radius — Tungaloy VNMA 160408 T5115 is an ISO-standard rhombic turning insert designed for general turning tasks on cast iron, suitable for both external and internal operations where a universal grade and consistent edge behaviour are required. ISO rhombic insert, compatible with standard holders CVD-coated carbide grade T5115 for cast iron 0.8 mm corner radius for consistent edge strength 4.76 mm thickness with cylindrical mounting hole Consistent cutting performance with a universal CVD-coated grade The CVD-coated T5115 grade is formulated as a universal solution for machining cast iron, offering a balanced combination of wear resistance and cutting-edge stability that extends tool life and reduces downtime. The CVD layer enhances temperature resistance and abrasion control, which helps maintain a consistent profile on the cutting edge during extended runs. For production environments seeking dependable cycle times, this insert provides predictable wear behaviour, reducing the need for frequent tool changes and supporting steady output quality. Precise geometry for secure mounting and predictable results The insert’s rhombic geometry and a fixed 0° clearance are compatible with ISO toolholder systems when matched for form, clearance angle, tolerance class, fastening, size and thickness. The nominal thickness of 4.76 mm and the cylindrical mounting hole ensure reliable clamping and repeatable positioning, which are critical for maintaining concentricity and achieving a consistent surface finish. Standardised dimensions simplify inventory and replacement planning, so spares and holder compatibility become straightforward to manage in a workshop setting. Application-focused advantages and chip control considerations Prepared primarily for external and internal turning, this indexable insert is supplied without a chipbreaker, allowing process engineers to select a chipformer tailored to the specific material grade and cutting conditions. For cast-iron turning, the universal nature of the grade supports a wide range of cutting parameters; however, optimising feed, depth of cut and the selected chip control geometry will determine surface finish and swarf behaviour. Choosing an appropriate holder and coolant strategy improves chip evacuation and prolongs the effective tool life of the insert. System integration, traceability and procurement details As part of an ISO-indexed system, the insert operates within a set-up consisting of a matching holder or boring bar, correct clamping kit and replacement screws. Traceability is supported by the manufacturer item identifications and the listed SKU, which facilitates reordering and batch control in production procurement. For complex set-ups or mixed-material production runs, Metav Werkzeuge can provide guidance on holder selection, optimal cutting data and stocking recommendations to ensure efficient use of the insert across turning operations. Contact Metav Werkzeuge for tailored advice on Tungaloy CVD-coated turning inserts, guidance on the right holder and chip control strategy, and to confirm current availability for seamless integration into production. Technical data Designation: VNMA160408 T5115 Manufacturer article number: 6850341 SKU: 6850341-Tungaloy Manufacturer SKU: TUN6850341 Material: carbide (Hartmetall) Coating / grade: CVD-coated carbide, T5115 Facts ISO code: 160408 Corner radius: 0.8 mm Thickness: 4.76 mm Size: 16 Angle: 35° Clearance angle: 0° Special features Rhombic insert shape Cylindrical locating hole Supplied without chipbreaker Universal grade for cast iron Compatible with ISO-standard toolholders System build: insert, external holder or boring bar, clamping kit and spare screws FAQ What materials is this insert intended for? This insert, the VNMA160408 T5115 from Tungaloy, is a universal CVD-coated carbide grade optimised for machining cast iron. Is the insert supplied with a chipbreaker? The VNMA160408 T5115 is supplied without a chipbreaker, allowing selection of an appropriate chipformer to suit the specific turning operation. Which holders are compatible with this ISO insert? Compatibility depends on matching form, clearance angle, tolerance class, fastening, size and thickness; ISO-standard holders and boring bars sized for VNMA160408 will accept this insert. How does the corner radius affect cutting performance? A 0.8 mm corner radius increases edge strength and can improve surface finish in medium to heavier cuts, while reducing the risk of chipping at interrupted cuts. Where can the manufacturer SKU be found for ordering? The manufacturer SKU for this item is TUN6850341 and the manufacturer article number is 6850341 for precise procurement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMA 160408 TH10 Wendeplatten - Tungaloy
VNMA 160408 TH10 ISO-Drehwendeschneidplatte für Drehen von Tungaloy Die VNMA 160408 TH10 ist eine ISO-genormte, unbeschichtete Wendeschneidplatte für das Außen- und Innendrehen von Nichteisenwerkstoffen und Anwendungen mit geringer Schnittkraftanforderung Rhombische Platte 16 mm, Dicke 4,76 mm Unbeschichtetes Hartmetall für saubere Oberflächen Zylindrisches Loch, Befestigung kompatibel mit ISO-Haltern Eckenradius 0,8 mm für definierte Schneidengeometrie Freiwinkel 0° und Spanbrecher ohne, universell einsetzbar Mehr Produktivität durch optimierte Schneidkante Die TH10-Sorte bietet eine scharfe Universalsorte, die speziell für Nichteisenwerkstoffe entwickelt wurde. Durch die unbeschichtete Schneidkante sinken die Schnittkräfte, sodass die Bearbeitung mit geringerer Energiezufuhr möglich ist und die Maschine stabiler läuft. Anwender profitieren von sauberen Oberflächen bereits im Rohbearbeitungszustand, was Nachbearbeitungsaufwand reduziert und die Zykluszeit verkürzt. Passgenauigkeit und Systemkompatibilität sichern Prozessstabilität Die Kompatibilität zu Haltern richtet sich nach Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke der Platte. Diese Platte ist Teil einer ISO-Drehplatten-Systemlösung und lässt sich mit passenden Außenhaltern, Unterlagen und Klemmsätzen einsetzen. Durch die eindeutige Normierung werden Wiederholgenauigkeit und schnelle Wechsel sichergestellt, was Rüstzeiten reduziert und die Auslastung der Maschine verbessert. Materialwahl und Anwendungsprofil einfach erklärt Das Hartmetall der Platte ist unbeschichtet und eignet sich besonders für Messing, Aluminium und ähnliche Nichteisenwerkstoffe. Unbeschichtete Sorten bieten bei solchen Werkstoffen Vorteile durch geringere Reibung und bessere Spanabfuhr. Die Platte ist für Außen- und Innendrehen vorgesehen; bei Bedarf empfiehlt sich die Auswahl eines passenden Spanbrechers oder einer alternativen Sorte für anspruchsvollere Stahlbearbeitungen. Technische Geometrie als Grundlage für Prozessentscheidungen Der Eckenradius von 0,8 mm ermöglicht eine ausgewogene Kombination aus Schneidkantenschärfe und Stabilität der Schneide. Der Freiwinkel von 0° und der Winkel von 35° beeinflussen Spanbildung und Auflageverhältnisse am Werkstück; diese Geometrien sind für das planbare Abtragen von Material und reproduzierbare Oberflächen verantwortlich. Anwender sollten Halter und Schrauben gemäß ISO-Vorgaben wählen, um die volle Leistungsfähigkeit zu nutzen. Empfehlung: Die unbeschichtete TH10-Wendeschneidplatte von Tungaloy empfiehlt sich besonders für produktive Bearbeitung von Nichteisenwerkstoffen mit Fokus auf saubere Oberflächen und niedrige Schnittkräfte; Bestellung und technische Beratung über Metav Werkzeuge, eMail: info@metav-werkzeuge.com, Telefon: +49 2822 7131930 Produktmerkmale Artikelnummer: 6809419 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Hersteller SKU: TUN6809419 Daten Eckenradius: 0,8 mm Plattendicke: 4,76 mm Plattengröße: 16 mm Winkel: 35° Freiwinkel: 0° Besonderheiten Material: Hartmetall Sorte/Beschichtung: TH10, unbeschichtet Plattenform: rhombisch Loch: mit Loch, zylindrisches Loch Spanbrecher: ohne Anwendung: Drehen Einsatzhinweis: scharfe Universalsorte für Nichteisenwerkstoffe und Anwendungen mit niedrigen Schnittkräften FAQ Für welche Werkstoffe eignet sich die Platte am besten? Die VNMA 160408 TH10 von Tungaloy eignet sich primär für Nichteisenwerkstoffe wie Aluminium und Messing; die unbeschichtete Hartmetallkante sorgt für saubere Oberflächen und niedrige Schnittkräfte. Welche Halter werden für diese ISO-Platte benötigt? Für die VNMA160408 sind ISO-kompatible Außenhalter oder Bohrstangen mit passender Form, Befestigung und Toleranzklasse erforderlich; Unterlage und Klemmsatz sollten der Plattendicke von 4,76 mm entsprechen. Wie beeinflusst der Eckenradius die Bearbeitung? Der Eckenradius 0,8 mm bietet eine Balance zwischen Schneidkantenschärfe und Stabilität, eignet sich daher für präzise Materialabnahme und reproduzierbare Oberflächenergebnisse. Gibt es Empfehlungen zur Spanformung bei fehlendem Spanbrecher? Da die Platte ohne Spanbrecher geliefert wird, empfiehlt sich die Anpassung von Schnittdaten und Werkzeughalterung zur gezielten Spanabfuhr; bei Bedarf kann ein geeigneter Spanbrecher oder eine andere Sorte gewählt werden. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VNMG 120402 AH6225 Wendeplatten - Tungaloy
VNMG120402 AH6225 Drehwendeschneidplatte für Drehen von Tungaloy Die VNMG120402 AH6225 ist eine ISO-genormte Drehwendeschneidplatte für Außen- und Innendrehen, konzipiert für die produktive Zerspanung rostfreier Stähle PVD-beschichtetes Hartmetall AH6225 für rostfreie Stähle Rhombische VNMG-Form mit 35° Schnittwinkel 0° Freiwinkel für stabile Schneidkante Eckenradius 0,2 mm für präzise Kantenqualität Mit zylindrischem Loch, kompatibel zu ISO-Haltern Hohe Prozesssicherheit durch Material und Beschichtung Die VNMG120402E-TSF AH6225 kombiniert PVD-Beschichtung und Hartmetall, um eine scharfe und gleichzeitig stabile Schneidkante zu liefern. Diese Sorte ist speziell für rostfreie Stähle ausgelegt und bietet konstante Standzeit bei wechselnden Schnittbedingungen. Anwender profitieren vor allem von zuverlässiger Spanbildung und guter Oberflächenqualität, wobei die Kombination aus Sorte und Spanbrecher für mittlere Bearbeitungsparameter optimiert ist. Die Materialwahl reduziert Werkzeugwechsel und erhöht die Produktivität bei Serienschnitten. Passgenauer Einsatz im ISO-System reduziert Rüstzeiten ISO-Genormte Abmessungen und die rhombische Form (VNMG) mit einem Schnittwinkel von 35° ermöglichen die einfache Integration in bestehende Werkzeugaufnahmen. Die Platte ist mit Loch und zylindrischem Lochstil gefertigt; die Kompatibilität zum Halter wird über Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke sichergestellt. Durch die standardisierten Maße und die Plattendicke 4,76 mm lassen sich Vorrichtungen schnell umrüsten, was Rüstzeiten verkürzt und die Maschinenlaufzeit erhöht. Geeignet für Anwender mit hohen Qualitätsansprüchen Werkstätten und Fertigungsbetriebe, die rostfreie Komponenten bearbeiten, finden in dieser Platte eine wirtschaftliche Lösung. Die Sorte AH6225 ist für wechselnde Bedingungen ausgelegt und bietet eine stabile Schneide in mittlerer Bearbeitung. Eine kurze Erklärung technischer Begriffe: PVD (Physical Vapor Deposition) ist ein Schichtverfahren, das eine harte, dünne Beschichtung erzeugt; der Eckenradius bezeichnet die Rundung an der Schneidkante und beeinflusst Maßhaltigkeit und Oberflächenrauheit. Die kompakte Geometrie sichert reproduzierbare Ergebnisse bei Serienfertigung. Empfehlung: Setzen Sie auf die VNMG120402E-TSF AH6225 von Tungaloy für zuverlässige Bearbeitung rostfreier Stähle; bei Fragen zur Anwendung oder Verfügbarkeit erreichen Sie uns unter info@metav-werkzeuge.com oder telefonisch +49 2822 7131930 Produktmerkmale Artikelnummer: 6947438 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VNMG120402E-TSF AH6225 SKU Hersteller: TUN6947438 Fakten Plattengröße: 12 mm Plattendicke: 4,76 mm Eckenradius: 0,2 mm Schnittwinkel: 35° Freiwinkel: 0° Besonderheiten Material: Hartmetall Schneidstofftyp: PVD-beschichtetes Hartmetall Sorte: AH6225 Spanbrecher: TSF Plattenform: rhombisch Loch: mit Loch Lochstil: zylindrisches Loch Einsatzgebiet: Drehen Typische Anwendung: Außen- und Innendrehen Kompatibilität: ISO-genormt, passend zu ISO-Haltern FAQ Welche Werkstoffe eignet die Platte besonders gut? Die VNMG120402E-TSF AH6225 von Tungaloy wurde für rostfreie Stähle entwickelt und liefert bei diesen Werkstoffen stabile Spanbildung und gute Oberflächenqualität. Welche Geometrischen Merkmale sind relevant für die Halterwahl? Entscheidend sind Form (VNMG), Schnittwinkel 35°, Freiwinkel 0° sowie Plattendicke 4,76 mm; diese Parameter bestimmen die passende Halteraufnahme und Toleranzklasse. Was bedeutet die Bezeichnung TSF beim Spanbrecher? TSF bezeichnet die Spanbrechergeometrie, die für kontrollierte Spanformung unter mittleren Schnittbedingungen ausgelegt ist und so zu sichereren Prozessen führt. Ist die Platte für Innen- und Außenbearbeitung geeignet? Ja, die ISO-genormte Wendeschneidplatte ist sowohl für Außen- als auch für Innendrehen vorgesehen und lässt sich mit geeigneten Außenhaltern oder Bohrstangen nutzen. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VNMG 120402 AH6225 Wendeplatten - Tungaloy
The combination of a sharp, PVD-coated carbide grade and a controlled PS chipbreaker delivers stable cutting performance and long edge life in variable turning conditions; ideal for stainless steel. Order the inserts directly via Metav Werkzeuge or consult the technical team for holder compatibility. VNMG 120402 AH6225 — ISO turning insert for turning applications by Tungaloy The VNMG 120402 AH6225 is an ISO rhombic indexable insert for external and internal turning, designed to provide a balanced cutting edge for medium machining of stainless steel. ISO rhombic insert geometry PVD-coated carbide AH6225 grade Optimised for stainless steel turning PS chipbreaker for steady chip control Reliable edge life through balanced PVD coating and grade selection The insert uses a PVD-coated carbide substrate in the AH6225 grade, selected to combine a sharp cutting edge with the stability required for medium-duty turning. This balance reduces flank wear while maintaining effective shear, which helps to extend tool life across varying cutting conditions. The controlled edge geometry and the moderate cutting-edge robustness support predictable tool changes and reduced downtime, contributing to a steady production flow and improved process economy. Consistent chip control and surface quality for stainless steel Equipped with a PS chipbreaker, the insert achieves reliable chip formation when machining stainless steel, reducing stringing and promoting short, manageable chips. The geometry—rhombic form with a 0.2 mm corner radius and 0° clearance angle—helps maintain a stable cutting line and delivers improved surface finish in medium finishing passes. The 4.76 mm plate thickness and the 35° lead angle provide rigidity at the cutting edge, which translates into fewer vibrations and a more consistent workpiece appearance. System compatibility and practical workshop integration The ISO‑compliant design ensures straightforward integration into existing holders and tool systems; compatibility depends on form, relief angle, tolerance class, fastening method, size and thickness. The insert features a cylindrical hole for secure clamping and is supplied in the ISO series intended for reliable replacement and predictable set-up. For workshops aiming to optimise cycle times, the insert supports a modular system approach: matching the insert with a suitable external holder or boring bar, correct clamp set and spare screws yields repeatable clamping and simplified logistics. Contact Metav Werkzeuge for tailored recommendations on holder compatibility and cutting parameters; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the VNMG 120402 AH6225 and system options Technical Data Article number: 6966297 SKU: 6966297-Tungaloy Manufacturer item no.: TUN6966297 Designation: VNMG120402E-PS AH6225 Core Data Corner radius: 0.2 mm Insert size: 12 mm Plate thickness: 4.76 mm Clearance angle: 0° Lead/angle: 35° Features Coating: PVD Grade: AH6225 Material: carbide Chipbreaker: PS Shape: rhombic Hole: cylindrical Series: ISO turning indexable inserts FAQ What materials is this insert recommended for? The VNMG 120402 AH6225 insert is optimised for machining stainless steel; the AH6225 grade and PS chipbreaker balance edge sharpness and stability for medium turning tasks. Which chipbreaker is integrated and what is its benefit? The PS chipbreaker produces controlled, short chips that improve process security and reduce the risk of chip entanglement during stainless steel turning with this Tungaloy insert. How is the insert clamped in the holder? The insert features a cylindrical centre hole for positive clamping; compatibility with a specific holder depends on form, tolerance class and insert thickness. What are the key dimensional data relevant for setup? Key measures are a 0.2 mm corner radius, 12 mm insert size, 4.76 mm thickness and a 35° lead angle, which together influence stiffness and cutting behaviour. Is the grade suitable for varying cutting conditions? Yes, AH6225 is a universal PVD-coated carbide grade designed to perform reliably under changing machining conditions while maintaining a sharp, stable cutting edge. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMG 120402 AH8015 Wendeplatten - Tungaloy
Benefit from the combination of PVD‑coated carbide durability, an ISO‑standard rhombic form and a secure clamping arrangement to maintain consistent productivity in turning operations; order directly via Metav Werkzeuge or consult our technical advisors for application support. VNMG 120402 AH8015 – ISO rhombic turning insert, PVD‑coated carbide, 0.2 mm nose radius, by Tungaloy VNMG120402E‑TF AH8015 is an ISO rhombic turning insert engineered for external and internal turning of heat‑resistant alloys, offering a balance of wear resistance and cutting‑edge stability for general machining tasks ISO‑standard rhombic insert VNMG120402 PVD‑coated carbide AH8015 for heat‑resistant alloys 0.2 mm nose radius for fine profiling With cylindrical hole for secure clamping Consistent edge stability for challenging alloys The PVD‑coated carbide grade AH8015 is specified for the general machining of heat‑resistant alloys, delivering a balanced mix of wear resistance and edge stability. This composition helps to maintain cutting performance at elevated temperatures and reduces the frequency of insert changes. By choosing an insert with these properties, workshops achieve more predictable tool life and steadier surface quality on demanding materials. Precision fit and secure clamping reduce setup variability The rhombic insert geometry combined with a cylindrical hole and defined dimensions ensures a repeatable mechanical fit in compatible holders. Key parameters—0° clearance angle, 35° approach angle, plate thickness 4.76 mm and 12 mm nominal size—determine compatibility with external toolholders and boring bars. Matching holder form, tolerance class, clamping method and thickness prevents micro‑movement at the cutting edge, which in turn reduces vibration and improves dimensional accuracy. Optimised chip control for uninterrupted production The integrated TF chipbreaker promotes predictable chip formation when paired with an appropriate feed and depth of cut, aiding evacuation and reducing recutting. Improved chip control lowers the risk of workpiece damage and tool interference, contributing to higher productivity and fewer machine stops. Selecting a chipbreaker and grade tailored to the workpiece material and machining stability yields the best combination of feed rates and surface finish. Practical compatibility and selection guidance for the workshop As part of an ISO insert system, the component is intended for use with a matching external holder or boring bar, in conjunction with a shim/clamping set and replacement fastening screws. Typical uses include both external and internal turning where a balanced grade is required. For applications requiring higher stability or different surface demands, consult the available holder options and consider feed adjustments rather than frequent insert swaps to keep cycle times efficient. For machining of heat‑resistant alloys, request the Tungaloy VNMG120402E‑TF AH8015 via Metav Werkzeuge or contact our specialists at info@metav-werkzeuge.com or +49 2822 7131930 to confirm holder compatibility and cutting parameters Technical data Article number: 6947427 Manufacturer SKU: TUN6947427 Metav SKU: 6947427-Tungaloy Model series: ISO‑Drehwendeschneidplatten Designation: VNMG120402E‑TF AH8015 Facts Plate size: 12 mm Plate thickness: 4.76 mm Nose radius: 0.2 mm Approach angle: 35° Clearance angle: 0° Hole: with hole (cylindrical) Special features Material: PVD‑coated carbide Chipbreaker: TF Geometry: rhombic Application: external and internal turning Compatible with ISO‑standard holders and clamping systems FAQ What materials is this insert best suited for? The VNMG120402E‑TF AH8015 is designed primarily for heat‑resistant alloys, offering a compromise between wear resistance and cutting‑edge stability for general turning operations. Which holders are compatible with this insert? Compatibility is determined by holder form, clearance angle, tolerance class, clamping method, size and plate thickness; the insert suits ISO‑standard external toolholders and boring bars specified for VNMG‑type rhombic plates. How does the TF chipbreaker affect machining? The TF chipbreaker promotes controlled chip formation, improving chip evacuation and reducing the risk of recutting, which supports longer uninterrupted cutting and better surface finishes. Is the insert suitable for both external and internal turning? Yes, the insert is intended for both external and internal turning, provided the holder and clamping system match the insert’s shape and dimensions. What are the key dimensional values to check before ordering? Check the plate size (12 mm), plate thickness (4.76 mm), nose radius (0.2 mm), approach angle (35°) and clearance angle (0°) to ensure proper fit and performance. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
VNMG 120402 AH8015 Wendeplatten - Tungaloy
Take advantage of the PVD-coated AH8015 grade and TSF chipbreaker for reliable machining of heat-resistant alloys; the balanced wear resistance and edge stability ensure consistent cycle times and lower insert consumption. Order directly via Metav Werkzeuge or request application advice from the consultants at Metav Werkzeuge for seamless integration into existing tool systems. VNMG120402E-TSF AH8015 indexable turning insert by Tungaloy — PVD-coated grade for heat-resistant alloys VNMG120402E-TSF AH8015 is an ISO‑standard indexable turning insert designed for external and internal turning in demanding alloy work; the rhombic form and TSF chipbreaker support stable chip control. ISO‑compliant VNMG form for universal turning PVD‑coated AH8015 for heat‑resistant alloys TSF chipbreaker for controlled chip formation 0.2 mm corner radius for fine surface finish Consistent cutting performance for heat‑resistant alloys The combination of a PVD‑coated surface and the AH8015 carbide grade delivers a balanced mix of wear resistance and cutting‑edge stability, which is particularly important when machining heat‑resistant alloys. The indexable insert (VNMG120402E-TSF) is engineered to reduce flank and crater wear under intermittent and continuous cuts, translating into fewer indexings per job and improved process reliability. For machining environments where thermal load and abrasive wear are critical, the coated grade extends tool life while maintaining dimensional repeatability. Geometry and chip control that improve surface quality The rhombic form combined with the TSF chipbreaker and a 0.2 mm corner radius supports consistent chip formation and evacuation, which directly benefits surface integrity and reduces secondary finishing. The 35° lead angle and the 0° relief angle create a stable cutting direction that reduces radial cutting forces and vibration. These geometric characteristics make the insert suitable for light finishing passes and medium cutting conditions where a fine surface and tight tolerances are required. The effect is lower scrap rates and faster attainment of final dimensions. System compatibility and practical handling As an ISO‑standard turning insert, compatibility with toolholders depends on the insert’s shape, relief angle, tolerance class, fixation method, size and thickness. The insert is supplied in a rhombic form with a cylindrical locating hole, a nominal size of 12 mm and a 4.76 mm thickness, which simplifies selection of the corresponding external holder or boring bar. The modular system approach—insert, holder, clamping kit and replacement screws—permits quick index changes and standardised set‑ups across multiple machines, improving shopfloor uptime and inventory control. For application-specific recommendations or stock availability of the Tungaloy VNMG120402E-TSF AH8015, please contact Metav Werkzeuge for fast technical advice and order processing: info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 6947439 SKU: 6947439-Tungaloy Manufacturer SKU: TUN6947439 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Corner radius: 0.2 mm Thickness: 4.76 mm Size (inscribed circle): 12 mm Lead angle: 35° Relief angle: 0° Hole style: cylindrical Special features Material: carbide Coating: PVD Grade: AH8015 Chipbreaker: TSF ISO designation: VNMG120402E-TSF Plate form: rhombic Intended application: turning Compatibility notes: holder matching by form, relief angle, tolerance class, fixation, size and thickness FAQ What materials is this insert suitable for? The Tungaloy VNMG120402E-TSF AH8015 insert is specified as a first choice for machining heat‑resistant alloys, offering a balance between wear resistance and edge stability for demanding turning applications. How does the TSF chipbreaker affect machining? The TSF chipbreaker on this indexable insert promotes stable chip control and evacuation, which improves surface finish and reduces the risk of built‑up edge during medium and finishing cuts. Which holders are compatible with this insert? Compatibility is determined by the insert’s form, relief angle, tolerance class, fixation method, size and thickness; the rhombic VNMG form and cylindrical hole require holders designed for VNMG‑type inserts and the specified 12 mm inscribed size. What dimensional details should be observed when replacing an insert? Key dimensions for this insert are a 0.2 mm corner radius, 4.76 mm thickness, 12 mm size, 35° lead angle and 0° relief angle; matching these with the holder specifications ensures correct seating and repeatable performance. Is this an original Tungaloy product? Yes, the item offered is an original, brand‑new Tungaloy indexable turning insert, listed under manufacturer item number 6947439. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMG 120402 AH8015 Wendeplatten - Tungaloy
VNMG 120402 AH8015 ISO-Drehwendeschneidplatte für Drehen von Tungaloy VNMG120402E-PS AH8015 bietet universelle Einsatzmöglichkeiten beim Außen- und Innendrehen und wurde für die Bearbeitung hitzebeständiger Legierungen entwickelt VNMG-Form ISO-genormt, Passgenauigkeit zum Halter PVD-beschichtetes Hartmetall, ausgewogene Standzeit PS-Spanformer optimal für hitzebeständige Legierungen Plattentyp rhombisch, Plattengröße 12 mm Loch zylindrisch, einfache Befestigung Praxisgerechte Materialwahl für langlebige Schneidkanten Die Wahl des Materials ist entscheidend für Produktivität und Prozesssicherheit. Diese Wendeschneidplatte besteht aus Hartmetall mit PVD-Beschichtung der Sorte AH8015, wodurch eine gute Balance zwischen Verschleißfestigkeit und Schneidkantenstabilität entsteht. Die Kombination reduziert Nacharbeit und erhöht die Werkzeugstandzeit. Für Anwender, die hitzebeständige Legierungen drehen, bedeutet das weniger Werkzeugwechsel und konstante Oberflächenqualität bei gleichbleibender Produktivität. Vielseitige Einsatzbereiche beim Drehen Die Platte eignet sich sowohl für das Außen- als auch für das Innendrehen; der PS-Spanformer unterstützt stabile Spanbildung bei anspruchsvollen Werkstoffen. Der Eckenradius von 0,2 mm ermöglicht präzise Konturen und zuverlässige Kantenfestigkeit. Die ISO-konforme Bauform garantiert Kompatibilität mit gängigen Außenhaltern und Bohrstangen, sodass Umrüstzeiten gering bleiben und Maschinenlaufzeiten effizient genutzt werden können. Konkreter Nutzen für Fertigung und Prozessplanung Durch die standardisierte VNMG-Geometrie und die definierte Plattendicke von 4,76 mm lässt sich die Platte einfach in bestehende Prozesse integrieren. Fertigungsplaner profitieren von berechenbarer Standzeit und reproduzierbarer Bauteilqualität, was Planungsaufwand und Ausschuss reduziert. Für Anwender mit wechselnden Losgrößen bietet die Sorte AH8015 eine ökonomische Lösung, da sie für eine breite Werkstoffpalette ausgelegt ist und so Lagerhaltungskosten senkt. Auswahlhilfe und technische Einordnung für Einsteiger Für eine sichere Auswahl ist die Abstimmung von Spanformer, Sorte und Freiwinkel entscheidend. PVD steht für physikalische Gasphasenabscheidung und verbessert die Verschleißbeständigkeit der Schneide. Der Begriff PS bezeichnet einen Spanformer, der auf stabile Spanbrechung und gute Zerspanungsbedingungen ausgelegt ist. Wer unsicher ist, welche Kombination für einen speziellen Werkstoff passt, kann die Daten der Platte als Orientierung nutzen und bei Bedarf die Anwendungstechnik konsultieren. Für eine zielgenaue Einsatzempfehlung zur AH8015-Sorte und Verfügbarkeit wenden Sie sich an die Anwendungstechnik von Metav Werkzeuge: info@metav-werkzeuge.com / +49 2822 7131930 Produktmerkmale Artikelnummer: 6966298 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VNMG120402E-PS AH8015 Fakten Eckenradius: 0,2 mm Plattendicke: 4,76 mm Plattengröße: 12 mm Winkel: 35° Freiwinkel: 0° Besonderheiten Material: Hartmetall Beschichtung: AH8015 (PVD) — ausgewogen zwischen Verschleißfestigkeit und Schneidkantenstabilität Schneidstofftyp: PVD-beschichtetes Hartmetall Spanformer: PS — stabile Spanbildung, geeignet für hitzebeständige Legierungen Loch: zylindrisches Loch Plattenform: rhombisch Anwendung: Drehen FAQ Wie kompatibel ist die Platte mit Standardhaltern? Die VNMG120402E-PS AH8015 ist ISO-genormt und damit kompatibel mit gängigen Außenhaltern und Bohrstangen, sofern Form, Freiwinkel und Plattendicke übereinstimmen. Für welche Werkstoffe ist die AH8015-Sorte geeignet? Die AH8015-Sorte wurde als erste Wahl für die allgemeine Bearbeitung hitzebeständiger Legierungen entwickelt und bietet eine ausgewogene Kombination aus Standzeit und Schneidkantenstabilität. Welchen Vorteil bietet der PS-Spanformer? Der PS-Spanformer sorgt für stabile Spanbildung und reduziert das Risiko von Spanverwicklungen, besonders bei schwer zerspanbaren Legierungen. Wie beeinflusst der Eckenradius die Bearbeitung? Ein Eckenradius von 0,2 mm ermöglicht präzise Konturen bei gleichzeitig ausreichender Schneidkantenfestigkeit, ideal für feine Passungen und Endbearbeitung. Welche Informationen sind für die Auswahl des Halters relevant? Für die Halterauswahl sind Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke der Platte maßgeblich; prüfen Sie diese Werte gegen die Angaben der VNMG120402E-PS AH8015. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VNMG 120402 AT9530 Wendeplatten - Tungaloy
High-precision finishing and consistent wear are delivered by the combination of the AT9530 coated cermet and the TSF chipbreaker, ensuring improved surface quality and predictable tool life. Order this indexable insert directly via Metav Werkzeuge or consult our specialists for selection and supply. VNMG120402E-TSF AT9530 indexable turning insert for turning applications — Tungaloy VNMG120402E-TSF AT9530 is an ISO rhombic indexable insert designed for finishing and light turning of steel, prioritising surface quality and uniform wear Coated cermet grade AT9530 TSF chipbreaker for finishing cuts 0.2 mm corner radius for fine surfaces ISO VNMG form with cylindrical hole Achieve superior surface finish with a specialised cermet grade The insert is engineered for precision finishing: the coated cermet AT9530 was developed to provide a balance between hardness and toughness, yielding consistent wear and a high-quality surface on machined steel. For light and finishing passes the TSF chipbreaker controls chip form to reduce vibration and avoid surface damage, which leads to fewer downstream operations and more predictable production cycles. The rhombic geometry and 0.2 mm corner radius support fine edge behaviour, enabling tight tolerances and reliable repeatability in batch production. Improve process stability and productivity through predictable tool life A clear advantage of this grade and geometry is stable wear progression, which simplifies tool-change planning and reduces scrap. The coated cermet composition resists abrasive wear typical in finishing, so component quality remains constant over the life of the insert. With reduced tool deviations, cycle times become repeatable and setup frequency is lowered, supporting cost-efficient machining and improved overall equipment effectiveness (OEE). These rational gains directly benefit production planning and reduce unplanned downtime. Easy integration into ISO tool systems and adaptable holder compatibility Designed to the ISO standard VNMG form, the insert fits common external holders and boring bars when the holder matches in form, clearance angle, tolerance class, fastening method, size and thickness. The cylindrical hole and standard thickness of 4.76 mm facilitate safe clamping and interchangeability across existing tool systems, allowing a straightforward retrofit into established turning processes. Compatibility reduces inventory complexity and helps sustain machining performance without extensive tooling changes. Practical guidance for machining steel with controlled chip formation For finishing operations on steel the recommended approach is light depth of cut and moderate feed, taking advantage of the TSF chip control to maintain short, curl‑free chips and a stable cutting zone. The insert’s construction supports high surface integrity while maintaining economical cutting conditions. When selecting a grade and chipbreaker, consider the workpiece clamping and machine rigidity first; the insert then contributes to reproducible surface finish and uniform edge wear, easing inspection and downstream handling. For precision finishing in turning choose Tungaloy’s AT9530-grade VNMG insert; contact Metav Werkzeuge for specification checks and availability at info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 6773724 SKU: 6773724-Tungaloy Manufacturer SKU: TUN6773724 Model series: ISO-Drehwendeschneidplatten Designation: VNMG120402E-TSF AT9530 Core data Corner radius: 0.2 mm Thickness: 4.76 mm Inscribed circle / size: 12 mm ISO code: 120402 Clearance angle: 0° Included hole: with cylindrical hole Insert angle: 35° Special features Coating / Grade: AT9530 Cutting material: coated cermet Chipbreaker: TSF (finishing) Plate shape: rhombic (VNMG) Typical application: turning — finishing and light machining of steel Compatibility note: fit depends on holder form, clearance, tolerance, fastening, size and thickness FAQ What applications suit this insert best? This insert is suited to finishing and light turning of steel; the AT9530 grade and TSF chipbreaker focus on surface quality and controlled wear. Which holders are compatible with this VNMG insert? Compatibility requires a holder matching the ISO VNMG form, clearance angle, tolerance class, fastening style, size and thickness; the cylindrical hole supports standard clamping. How does the TSF chipbreaker affect machining? The TSF chipbreaker promotes short, controllable chips in finishing passes, improving surface finish and reducing the risk of vibration-induced defects. What measurable characteristics define this insert? Key values include a 0.2 mm corner radius, 4.76 mm thickness, 12 mm inscribed size and ISO code 120402, which determine cutting behaviour and holder fit. Is this product traceable to the manufacturer? The insert is a Tungaloy item with article number 6773724 and manufacturer SKU TUN6773724; original factory-new parts are supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMG 120402 GT9530 Wendeplatten - Tungaloy
Take advantage of a wear-resistant GT9530 cutting grade and ISO-standard geometry for consistent finishing results; the combination of long tool life, precise form and simple integration into ISO holders keeps turning processes productive and reliable. Order via Metav Werkzeuge or consult the team for selection support. VNMG120402E-TSF GT9530 — ISO turning insert for finishing (Tungaloy) The VNMG120402E-TSF GT9530 is an ISO-standard turning insert engineered for finishing and light general-purpose turning, offering a coated cermet grade that targets improved surface quality and extended tool life. GT9530 coated cermet for long tool life ISO-standard VNMG120402 geometry 0° clearance angle, 0.2 mm corner radius Rhombic shape with cylindrical hole Consistent surface quality through a wear‑resistant cutting grade The GT9530 coated cermet composition combines ceramic hardness with metallic toughness, delivering improved wear resistance compared with conventional finishing grades. In practice, this means fewer index changes and more consistent component finish over long runs. For operations where a fine surface and dimensional stability matter, the coated cermet keeps flank wear in check while maintaining cutting-edge integrity under stable clamping conditions. ISO geometry for predictable clamping and repeatability Adoption of the ISO-standard VNMG geometry ensures repeatable seating and straightforward replacement in compatible toolholders. Key geometry attributes such as the rhombic profile, the cylindrical hole and defined thickness make mechanical compatibility a matter of matching form, clearance and fastening style. The standardised shape reduces setup variability and helps to achieve consistent cycle-to-cycle accuracy in external and internal turning tasks. Low-radius edge and chip control tailored to finishing A 0.2 mm corner radius supports smooth transitions at the cutting edge, improving surface finish on turned parts while limiting cutting forces during light cuts. The TSF chipbreaker is optimised for finishing to light universal cuts, producing short, manageable chips that ease evacuation and reduce the risk of re-cutting. When used with a rigid holder and appropriate feeds, the edge design helps deliver the polished surfaces often required in precision turning. Practical system integration for efficient tool management The insert is intended to be used as part of a system comprising an ISO turning holder or boring bar, supporting plate/clamp set and replacement screws. Its ISO designation simplifies stocking and interchange; traceability is supported by the manufacturer and SKU details. For workshops aiming to reduce setup downtime, the standardised dimensions and hole style facilitate quick, secure clamping and straightforward inventory management. For application advice, availability and tailored recommendations on the Tungaloy GT9530 grade contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — the team will assist with selection and order placement. Technical data Article number: 6750969 Manufacturer SKU: TUN6750969 SKU: 6750969-Tungaloy Model series: ISO turning inserts Designation: VNMG120402E-TSF GT9530 Specifications Corner radius: 0.2 mm Size: 12 mm Plate thickness: 4.76 mm Relief/clearance angle: 0° Wedge angle: 35° Hole style: with cylindrical hole Materials & features Cutting grade: GT9530 (coated cermet) Chipbreaker: TSF (finishing to light universal) Plate shape: rhombic Compatibility: ISO turning holders Typical application: external and internal turning; finishing FAQ Which materials is this insert suitable for? The VNMG120402E-TSF GT9530 insert (Tungaloy, SKU 6750969-Tungaloy) is formulated primarily for turning steel, offering wear-resistant finishing performance and improved surface quality under stable conditions. How is holder compatibility determined? Compatibility depends on matching the insert form, clearance angle, tolerance class, fastening method, size and thickness; the VNMG120402 geometry is ISO-standard, simplifying selection of a matching ISO holder. What effect does the 0.2 mm corner radius have? A 0.2 mm corner radius balances surface finish and edge strength, producing a finer finish on light cuts while helping to stabilise the cutting edge during finishing operations. What chip control can be expected with the TSF chipbreaker? The TSF chipbreaker is optimised for finishing to light universal cuts and produces short, controllable chips that support clean evacuation and consistent surface results. Is this an ISO-standard insert and where can the SKU be found? Yes, the VNMG120402E-TSF GT9530 is ISO-standard; reference the manufacturer article number 6750969 and SKU TUN6750969 / 6750969-Tungaloy for procurement and traceability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMG 120402 NS9530 Wendeplatten - Tungaloy
Benefit from the combination of the NS9530 uncoated cermet grade and a sharp cutting edge for consistently low cutting forces and superior surface finish; the ISO‑standard form and cylindrical hole ensure reliable clamping and simple integration into existing turning systems. Order the insert directly via Metav Werkzeuge or consult our specialists for cutting‑data recommendations. VNMG120402E-TSF NS9530 ISO turning insert — uncoated cermet, finishing grade, 35° — Tungaloy The VNMG120402E-TSF NS9530 is an ISO‑normed rhombic turning insert designed for external and internal finishing of steel, offering a low‑force cutting geometry for continuous cuts and small depths of cut. Uncoated cermet NS9530 for fine finishing Sharp cutting edge for low cutting forces ISO‑standard VNMG form with cylindrical hole 0.2 mm corner radius for precise part geometries Achieve consistently high surface quality with a finishing‑focused grade The uncoated NS9530 cermet is formulated for finishing applications where a sharp cutting edge and reduced cutting forces are decisive. Its composition supports a high‑quality, repeatable surface finish on steel in continuous cutting conditions, keeping vibration and built‑up edge to a minimum. As a consequence, machining cycles that demand tight dimensional tolerances and excellent surface integrity benefit directly from the lower mechanical load and improved tool–workpiece interaction provided by this grade. This makes the insert especially suitable where small depths of cut are specified and consistent part appearance is required. Reliable geometry and simple holder integration for predictable results The ISO‑design of the insert guarantees predictable compatibility with standard turning holders: form, clearance angle, tolerance class, clamping and thickness determine fit. The specified 35° approach angle and the rhombic plate shape combine to deliver stable cutting forces and access to internal profiles where space is limited. The insert features a 0.2 mm corner radius and a plate thickness of 4.76 mm, while the cylindrical hole provides secure fastening and straightforward replacement. These measurable parameters simplify process planning and reduce setup variability, contributing to consistent cycle times and repeatable part quality. Process benefits: efficiency, tool life and repeatability Low cutting forces associated with the NS9530 finishing grade reduce load on the toolholder and machine spindle, which often results in extended tool life and less frequent rework. The TSF chipbreaker is selected for its suitability in continuous cutting; it promotes short, controllable chips and supports steady evacuation under stable conditions. For manufacturers prioritising throughput without sacrificing surface quality, this combination offers a favourable balance between productivity and finish. Moreover, the ISO‑standard form ensures replacements can be sourced and fitted quickly, limiting production downtime. Practical selection and safe mounting for workshop use When specifying inserts for turning operations, match the chipbreaker and grade to the workpiece material and the chosen cutting strategy: finishing cuts with small feed rates will exploit the NS9530 advantages most effectively. Confirm holder compatibility by checking form, free angle and plate dimensions; use the original Tungaloy fastening screws and clamping pads where applicable to preserve tolerance and repeatability. The item is listed under the manufacturer SKU TUN6750968 and article number 6750968 for straightforward procurement and traceability in tool inventories. Contact Metav Werkzeuge for precise advice on integrating Tungaloy finishing inserts into current turning operations or for recommendations on matching holders and cutting data; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6750968 Manufacturer SKU: TUN6750968 Label: VNMG120402E-TSF NS9530 Model series: ISO‑Drehwendeschneidplatten Numbers / Core technical data Corner radius: 0.2 mm Plate thickness: 4.76 mm Plate size: 12 Angle: 35° Clearance angle: 0° Hole: with cylindrical hole Designs / Special features Uncoated cermet grade NS9530 Chipbreaker: TSF Rhombic plate form Application: Turning (external and internal finishing) FAQ What materials is this insert best suited for? The VNMG120402E-TSF NS9530 insert is formulated as a finishing grade for steel, offering a sharp edge and low cutting forces suited to continuous cuts and small depths of cut. Is the insert compatible with standard VNMG holders? Compatibility is determined by form, clearance angle, tolerance class, clamping method, size and thickness; the ISO‑standard VNMG form and cylindrical hole of this insert facilitate fitting in standard holders designed for VNMG plates. What edge preparation and corner radius does the insert have? This version has a 0.2 mm corner radius and a sharp finishing edge inherent to the NS9530 grade, optimised for fine surface quality. Which chipbreaker is fitted and what is its effect? The insert carries the TSF chipbreaker, which supports short, controllable chips under continuous cutting conditions and contributes to stable chip evacuation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
VNMG 120402 NS9530 Wendeplatten - Tungaloy
The combination of an uncoated cermet grade and a 0.2 mm corner radius delivers superior surface quality and low cutting forces for finishing operations; coupled with the ISO rhombic geometry, the insert integrates easily into standard holders for a reliable production flow. Order the insert via Metav Werkzeuge or consult the technical team for holder matching and process parameters. VNMG 120402 NS9530 — Turning insert, rhombic ISO geometry (Tungaloy) VNMG 120402 NS9530 is a precision finishing turning insert designed for steel turning applications, offering a sharp cutting edge and stable performance in continuous cuts. Uncoated cermet for fine finishing Low cutting forces for continuous cuts Rhombic ISO geometry, 35° lead angle 0.2 mm corner radius for precision Achieve consistent, high-quality finishes on steel The uncoated cermet grade NS9530 is engineered for finishing operations on steel. Its sharp cutting edge and material composition reduce built-up edge and minimise friction, which leads to improved surface quality and fewer passes to reach tolerance. For applications with small depths of cut and continuous cuts, this grade keeps forces low and chip formation steady. The insert VNMG120402E-PS is particularly suitable where a high-quality finish is the primary objective and where minimised cutting forces reduce spindle loads and tool vibration. Predictable chip control and process stability Equipped with a PS chipbreaker, the insert promotes consistent chip formation under finishing conditions. The combination of chip geometry and the 0.2 mm corner radius provides a controlled shear zone, which reduces the risk of irregular chips and improves machining stability. This predictability supports longer uninterrupted cycles and contributes to fewer part reworks. For production environments that favour repeatability and stable tool life, the construction and geometry of this insert provide a clear advantage. Straightforward integration into ISO holders for efficient changeover The insert follows ISO rhombic geometry and is compatible with standard clamping systems, where compatibility is determined by form, clearance, tolerance class, fastening and thickness. With a 12 mm inscribed circle and 4.76 mm thickness, the insert fits a wide range of VNMG-capable holders. The 0° relief angle and the 35° lead angle are optimised for turning applications that demand minimal radial engagement and precise contact. The cylindrical hole simplifies secure clamping via standard clamp sets and replacement screws, enabling quick tool changes and consistent seating in production tooling. Application guidance and practical benefits For finishing steel, select the NS9530 grade and the PS chipbreaker to exploit the insert’s low cutting forces and surface-finish advantages. The design supports continuous turning where vibration is low; in less stable set-ups, pairing the insert with a robust holder and optimised cutting parameters ensures best results. The insert’s geometry also eases programming choices on CNC lathes: a fine feed and modest depth of cut deliver the intended surface finish while preserving the sharp edge. If guidance on feeds, speeds or holder pairing is required, technical consultation is recommended to match machine capability, workpiece stability and desired outcomes. For application advice and stock information on the Tungaloy VNMG 120402 NS9530 finishing insert, contact Metav Werkzeuge – email info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 6966299 Manufacturer SKU: TUN6966299 Model series: ISO-Drehwendeschneidplatten Product designation: VNMG120402E-PS NS9530 SKU: 6966299-Tungaloy Facts Insert size: 12 Plate thickness: 4.76 mm Lead angle: 35° Relief angle: 0° Corner radius: 0.2 mm Special features Cutting material: uncoated cermet (NS9530) Chipbreaker: PS Plate shape: rhombic Hole: with cylindrical hole Application: turning Typical use: finishing steel and continuous cuts FAQ Which materials is this insert best suited for? The VNMG120402E-PS NS9530 is optimised for finishing steel, offering a sharp edge and controlled cutting action suited to continuous turning where surface quality matters. Does the insert fit standard ISO VNMG holders? Yes. The rhombic ISO geometry and the 12 mm inscribed circle allow compatibility with standard VNMG holders, subject to matching the holder’s form, tolerance class and clamping style. What is the role of the PS chipbreaker? The PS chipbreaker promotes regular chip formation under finishing conditions, improving machining stability and reducing the likelihood of chip-related interruptions. How does the 0.2 mm corner radius affect performance? A 0.2 mm corner radius balances edge strength and fineness of finish: it supports high surface quality while maintaining adequate edge durability for finishing passes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMG 120402 T6215 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide grade and the precision 0.2 mm corner radius for consistent turning results in stainless steels; the combination of reliable wear resistance, optimised chip control and ISO compatibility supports uninterrupted production. Order directly via Metav Werkzeuge or ask the consultants for application-specific recommendations. VNMG 120402 T6215 – VNMG ISO 120402 turning insert by Tungaloy A VNMG120402E-PS T6215 indexable turning insert engineered for stable to lightly interrupted machining of stainless steels, compatible with ISO tooling systems. CVD-coated carbide grade T6215 Optimised PS chipbreaker for controlled chips Rhombic VNMG form with 35° cutting angle 0.2 mm corner radius for balanced finish and strength Proven wear resistance for stainless steel turning The T6215 grade is a CVD-coated carbide engineered to extend tool life when machining stainless steels. With enhanced surface hardness from the coating and a substrate optimised for toughness, the insert sustains cutting performance under stable and slightly interrupted conditions. This leads to reduced rework and fewer insert changes, translating into measurable gains in throughput while maintaining process consistency. Geometry that delivers repeatable surface quality The rhombic form and 35° cutting angle combine with a 0.2 mm corner radius to provide a balance between strength and surface finish. The rhombic form supports versatile turning applications — from light profiling to shoulder finishing — while the small radius improves edge strength without sacrificing the achievable finish. The ISO-based geometry ensures predictable engagement with standard external and internal holders, aiding in process repeatability. Controlled chips and smoother cycle times Equipped with the PS chipbreaker, the insert promotes reliable chip control, which reduces downtime caused by tangled chips and improves evacuation in long cuts. Better chip geometry lowers the risk of workpiece damage and shortens secondary handling. For workshops aiming to increase uptime, optimised chip control is a practical route to fewer interruptions and improved cycle efficiency. System compatibility and selection guidance The insert follows ISO specifications and is compatible with holders that match form, relief angle, tolerance class, clamping method, size and thickness. Selecting the correct combination of insert, holder and clamp set ensures secure seating and consistent cutting forces. When the holder geometry and the insert’s relief angle are matched, tool life and finish stability improve, making the whole system more predictable in serial production. Operational benefits and application fit Designed for external and internal turning, this grade is particularly suited to components made from stainless steels requiring reliable edge integrity and surface quality. The insert’s construction supports productive metal removal while maintaining a stable cutting edge, which can lower overall tooling costs through longer intervals between index changes. For processes sensitive to surface integrity, the grade and chipbreaker combination is a practical choice. For application advice, stock information or to request cutting-parameter recommendations for this Tungaloy VNMG120402E-PS T6215 insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored support. Technical data SKU: 6966296-Tungaloy Manufacturer article number: 6966296 Manufacturer SKU: TUN6966296 Model series: ISO turning indexable inserts Insert designation: VNMG120402E-PS Measurements & core data Inscribed circle (size): 12 mm Thickness: 4.76 mm Corner radius: 0.2 mm Relief angle: 0° Cutting angle: 35° Hole: cylindrical hole Materials & special features Material: carbide Coating: CVD-coated (grade T6215) Chipbreaker: PS Application: turning (external and internal) Suitability: stable to lightly interrupted cutting conditions Plate form: rhombic FAQ What materials is this insert intended for? The VNMG120402E-PS T6215 insert is specified for stainless steels and is designed to maintain wear resistance and edge stability in those applications. Which chip control can be expected from the PS chipbreaker? The PS chipbreaker on this insert produces compact, manageable chips that improve evacuation and reduce the chance of chip entanglement during turning operations. Is the insert compatible with standard ISO VNMG holders? Yes; the VNMG120402E-PS follows ISO dimensions and is compatible with holders that match the form, relief angle, tolerance and clamping method for VNMG inserts. How does the 0.2 mm corner radius affect performance? A 0.2 mm radius balances edge strength and finish quality, offering improved resistance to chipping while enabling good surface finish in finishing and light profiling tasks. What does the T6215 grade provide compared with other grades? The T6215 grade is a CVD-coated carbide that emphasises wear resistance for stainless steel turning, helping to extend insert life under stable to slightly interrupted conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMG 120402 T6215 Wendeplatten - Tungaloy
VNMG 120402 T6215 ISO-Drehwendeschneidplatte zum Drehen – Tungaloy VNMG 120402 T6215 ist eine ISO-genormte Drehwendeschneidplatte für das Drehen rostfreier Stähle unter stabilen bis leicht unterbrochenen Bedingungen. VNMG-Form für Außen- und Innendrehen CVD-beschichtetes Hartmetall für lange Standzeit Optimierter TSF-Spanbrecher für kontrollierte Spanbildung Mit zylindrischem Loch und 0,2 mm Radius Höhere Produktivität durch verschleißarme Beschichtung Die CVD-beschichtung auf dem Hartmetall reduziert Abrieb und verlängert die Standzeit, was Stillstandzeiten und Werkzeugwechsel verringert. Bei der Bearbeitung von rostfreiem Stahl zeigt die Sorte T6215 stabile Verschleißeigenschaften, sodass Fertigungsprozesse seltener unterbrochen werden. Die resultierende Wirtschaftlichkeit äußert sich in weniger Maschinenstillstand und geringeren Werkzeugkosten pro Werkstück. Präzise Kante und reproduzierbare Oberflächenqualität Der Eckenradius von 0,2 mm erhöht die Schneidkantenstabilität und führt zu konstanter Oberflächengüte, besonders beim Finish-Drehen. Der Spitzenwinkel von 35° unterstützt dabei eine ausgewogene Schnittkraftverteilung und trägt zu gleichbleibenden Ergebnissen bei. Ein kurzer Exkurs: Der Eckenradius ist der kleine Abrundungsbereich an der Schneide, der Bruchneigung reduziert und die Standzeit verbessert. Einfacher Einbau und sichere Spannsysteme Als ISO-genormte Wendeschneidplatte ist die Austauschbarkeit gewährleistet; die Kompatibilität hängt von Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke ab. Das zylindrische Loch ermöglicht eine sichere Befestigung am Halter und vereinfacht den Plattenwechsel. Im Systemaufbau besteht die Kombination aus ISO-Platte, passendem Außenhalter oder Bohrstange sowie Unterlage und Klemmsatz. Spezialisierte Anwendung und Zielgruppe Die Platte richtet sich an Lohnfertiger, Maschinenbauer und Werkstätten, die rostfreien Stahl produktiv und mit stabiler Spanbildung zerspanen möchten. Der TSF-Spanbrecher ist speziell auf gleichmäßige Spanformung ausgelegt; die Sorte bietet sich an, wenn konstante Prozesse und reproduzierbare Ergebnisse gefragt sind. Für Anwender mit wechselnden Werkstückserfordernissen ermöglicht die Kombination aus Form und Beschichtung eine breite Einsatzfähigkeit. Für dauerhaft wirtschaftliche Zerspanung von rostfreiem Stahl die VNMG 120402 T6215 von Tungaloy wählen – bei Rückfragen eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Technische Daten Artikelnummer: 6944927 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VNMG120402E-TSF T6215 Hersteller SKU: TUN6944927 Daten Plattengröße: 12 mm Plattendicke: 4,76 mm Eckenradius: 0,2 mm Winkel: 35° Freiwinkel: 0° Besonderheiten Schneidstoff: CVD-beschichtetes Hartmetall Spanbrecher: TSF (optimiert für stabile Spanbildung bei rostfreiem Stahl) Loch: Mit Loch, zylindrisches Loch Plattenform: Rhombisch Einsatz: Drehen Systemaufbau: ISO-Drehplatte, passender Außenhalter oder Bohrstange, Unterlage/Klemmsatz, Ersatzschrauben Einsatz der Sorte: verschleißfeste Sorte für das Drehen rostfreier Stähle unter stabilen bis leicht unterbrochenen Bedingungen FAQ Für welche Werkstoffe eignet sich diese Wendeschneidplatte am besten? Die VNMG 120402 T6215 von Tungaloy ist speziell für die Bearbeitung von rostfreiem Stahl ausgelegt; die Kombination aus CVD-beschichtung und TSF-Spanbrecher sorgt für stabile Spanbildung und verlängerte Werkzeugstandzeit. Welche Vorteile bringt die CVD-beschichtung? Die CVD-beschichtung auf dem Hartmetall erhöht die Verschleißfestigkeit und Hitzeresistenz, was bei hohen Temperaturen und abrasiven Bedingungen zu längeren Intervallen zwischen Werkzeugwechseln führt. Wie beeinflusst der Eckenradius das Bearbeitungsergebnis? Ein Eckenradius von 0,2 mm stärkt die Schneidkante, reduziert Ausbrüche und verbessert die Oberflächengüte insbesondere beim Finish-Drehen. Ist die Platte mit gängigen ISO-Haltern kompatibel? Ja, die VNMG120402E-TSF ist ISO-genormt; die Kompatibilität mit einem Halter hängt von Form, Freiwinkel, Befestigung, Größe und Dicke ab. Das zylindrische Loch gewährleistet eine sichere Befestigung. Für welche Bearbeitungsbedingungen ist die Sorte T6215 vorgesehen? Die Sorte T6215 ist für stabile bis leicht unterbrochene Bedingungen bei rostfreiem Stahl ausgelegt und bietet eine gute Balance zwischen Standzeit und Zerspanungsleistung. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VNMG 120402 T9215 Wendeplatten - Tungaloy
VNMG 120402 T9215 ISO-Drehwendeschneidplatte zum Drehen von Tungaloy Die VNMG 120402 T9215 ist eine ISO-genormte rhombische Wendeschneidplatte mit CVD-beschichtetem Hartmetall, entwickelt für produktives Drehen von mittleren Stahlwerkstoffen VNMG ISO-Platte für produktives Drehen CVD-beschichtetes Hartmetall für hohe Standzeit TF-Spanbrecher für kontinuierlichen Schnitt Mit zylindrischem Loch für sichere Befestigung Eckenradius 0,2 mm für feine Oberflächen Hohe Produktivität bei mittlerer Stahlbearbeitung sichern Die T9215-Sorte basiert auf CVD-beschichtetem Hartmetall und verbindet hohen Verschleißwiderstand mit zuverlässiger Bruchsicherheit. Das Ergebnis ist eine konstante Standzeit selbst bei permanentem oder leicht unterbrochenem Schnitt, was die Werkzeugwechsel reduziert und die Produktivität in Serienfertigung deutlich steigert. Für Anwender bedeutet das weniger Stillstandzeiten und bessere Planbarkeit der Fertigungsprozesse. Kompakte Geometrie und belastbare Befestigung für stabile Schnitte Die rhombische Plattenform mit einem Eckenradius von 0,2 mm und einer Plattendicke von 4,76 mm sorgt für präzise Schneidbedingungen. Das zylindrische Loch ermöglicht sichere Klemmsituationen im Halter, die ISO-Genormung garantiert Austauschbarkeit. Der angegebene Winkel von 35° beeinflusst die Spanbildung positiv und trägt zu gleichmäßigen Schnittkräften bei, was die Oberflächenqualität verbessert. Passende Einsatzfelder und gezielte Werkstoffabdeckung Für Außen- und Innendrehen ist die Platte eine erste Wahl bei mittlerem Stahl. Der TF-Spanbrecher ist optimiert für kontinuierliche Schnitte; bei leicht unterbrochenem Schnitt bleibt die Schneidkante stabil. Anwender in der Serienfertigung, Lohnbearbeitung und dem Maschinenbau profitieren von der breiten Anwendbarkeit und der einfachen Auswahl nach Halterform, Freiwinkel und Toleranzklasse. Wirtschaftlichkeit durch langlebige Schneidkante und planbare Prozesssicherheit Durch die Kombination aus robuster Schneidstoffsorte und durchdachter Geometrie sinken die Kosten pro gefertigte Einheit. Die T9215-Sorte liefert konstante Ergebnisse bei hoher Schnittgeschwindigkeit und reduziert Ausschuss durch stabile Spanbildung. Insgesamt sorgt das für niedrigere Gesamtbetriebskosten und höhere Ausbringung bei gleichbleibender Bauteilqualität. Empfehlung: Für produktive Stahlbearbeitung die VNMG 120402 T9215 von Tungaloy wählen und bei Metav Werkzeuge die technische Beratung unter info@metav-werkzeuge.com oder telefonisch +49 2822 7131930 anfragen Produktmerkmale Artikelnummer: 6782320 Hersteller: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VNMG120402E-TF SKU Hersteller: TUN6782320 Fakten Plattengröße: 12 mm Plattendicke: 4,76 mm Eckenradius: 0,2 mm Winkel: 35° Freiwinkel: 0° Besonderheiten Material: Hartmetall Beschichtung: CVD-beschichtet (hohe Verschleißbeständigkeit) Sorte: T9215 Spanbrecher: TF Loch: mit Loch Lochstil: zylindrisches Loch Plattenform: rhombisch Anwendung: Drehen ISO-genormt Typische Anwendung: Außen- und Innendrehen FAQ Kann die Platte für Innen- und Außenbearbeitung eingesetzt werden? Ja, die VNMG 120402 T9215 von Tungaloy eignet sich für Außen- und Innendrehen; der TF-Spanbrecher ist für kontinuierliche Schnitte ausgelegt und bietet stabile Spanbildung. Welche Vorteile bietet die T9215-Sorte gegenüber Standard-Hartmetall? Die T9215-Sorte kombiniert CVD-beschichtetes Hartmetall mit hoher Verschleißfestigkeit und guter Bruchsicherheit, was zu längeren Standzeiten und konstanteren Prozessen führt. Welche Halter sind kompatibel mit der VNMG120402E-TF? Kompatibel sind ISO-genormte Außenhalter oder Bohrstangen, wobei Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke zu beachten sind; die Bezeichnung VNMG120402E-TF erleichtert die Auswahl. Wie wirkt sich der Eckenradius 0,2 mm auf die Bearbeitungsqualität aus? Der Eckenradius 0,2 mm erlaubt feinere Oberflächen und bessere Kantenausbildung bei mittleren Schnittdaten, eignet sich also für Bauteile mit höheren Oberflächenanforderungen. Welche Informationen enthält die Hersteller-SKU TUN6782320? Die SKU TUN6782320 identifiziert die konkrete Ausführung der Platte bei Tungaloy und hilft bei Bestellung und Lagerverwaltung sowie bei der Zuordnung zu den technischen Daten. für de-DE: Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com