WNMG 080408 AH8005 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide AH8005 wear resistance and the WNMG080408-HRF geometry for consistent, stable turning of heat-resistant alloys; order directly via Metav Werkzeuge or consult our specialists for application support. WNMG 080408 AH8005 – ISO indexable insert for turning by Tungaloy WNMG080408-HRF AH8005 is an ISO-indexable insert designed for external and internal turning, optimised for heat-resistant alloys and hard materials. WNMG 080408 trigon insert PVD-coated carbide AH8005 for heat-resistant alloys 0° clearance angle with HRF chipbreaker 4.76 mm insert thickness, cylindrical hole fixing Predictable geometry for repeatable turning performance The WNMG080408-HRF combines a stable trigon form with a defined 0.8 mm corner radius to deliver predictable cutting behaviour. The trigon shape gives three usable cutting edges per index, reducing tool change frequency and improving uptime. The 0° clearance angle and central, cylindrical hole fixing ensure secure clamping in ISO-compatible holders, which translates into consistent chip formation and repeatable dimensions during both external and internal turning operations. For production environments where process stability is crucial, this geometry supports reliable cycle times and repeatable part quality. Grade and coating engineered for demanding materials The insert uses the AH8005 grade, a PVD-coated carbide designed to resist abrasive and thermal wear when machining heat-resistant alloys and other hard materials. The PVD layer improves edge integrity and reduces adhesion, helping to extend tool life under elevated cutting temperatures. In practice, the wear-resistant nature of this grade supports longer uninterrupted runs and reduces the frequency of index changes, which improves productivity and lowers operating costs. Where surface finish and tool life matter, the combination of carbide substrate and PVD-coated protection offers a reliable balance between performance and economy. System compatibility and operational benefits in the shop As an ISO-norm insert, the part integrates into standard turning systems that accept WNMG geometry; compatibility is determined by insert form, clearance, tolerance class, fixing method and thickness. The HRF chipbreaker is matched to stable cutting conditions and helps control chip shape for safer evacuation and reduced secondary operations. With a 4.76 mm plate thickness and a cylindrical hole fixing method, the insert sits securely in many external holders and boring bars, contributing to improved process reliability. Selecting the appropriate chipbreaker and grade for the component material and machine rigidity enables a concise cost-benefit outcome: longer tool life, fewer interventions, and consistent part quality. Contact Metav Werkzeuge for tailored advice on Tungaloy AH8005 inserts and stock availability — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 6741699 Manufacturer SKU: TUN6741699 SKU: 6741699-Tungaloy Model series: ISO indexable turning inserts Numbers / Core technical data Insert designation: WNMG080408-HRF ISO code: 080408 Corner radius: 0.8 mm Plate thickness: 4.76 mm Insert size: 08 Main angle: 80° Relief angle: 0° Hole: cylindrical Designs / Special features Grade: AH8005 (PVD-coated) Material: carbide Shape: trigon Chipbreaker: HRF Fixing: with cylindrical hole Application: turning (external and internal) Suited for: heat-resistant alloys and hard materials Compatibility: ISO-standard holders and boring bars FAQ What materials is this insert best suited to machine? The WNMG080408-HRF AH8005 insert from Tungaloy is optimised for heat-resistant alloys and other hard materials; the AH8005 PVD-coated carbide grade offers wear resistance under elevated temperatures. Which holders are compatible with this insert? Compatibility is determined by ISO geometry, relief, thickness and fixing. The WNMG080408-HRF fits ISO-compatible holders and boring bars designed for WNMG trigon inserts. How does the HRF chipbreaker affect machining? The HRF chipbreaker is designed for stable cutting conditions and produces manageable chip forms, improving evacuation and reducing rework compared with uncontrolled chips. What are the ordering details for this item? The article number is 6741699 and the manufacturer SKU is TUN6741699; the item is listed as SKU 6741699-Tungaloy and can be supplied by Metav Werkzeuge. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080408 AH8005 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide AH8005, precise geometry and ISO conformity for reliable, productive turning of heat-resistant alloys and hard materials; order directly via Metav Werkzeuge or consult our specialists for process support. WNMG080408-HRM AH8005 (WNMG 080408) – ISO turning insert for Turning by Tungaloy The WNMG080408-HRM AH8005 is an ISO-standard indexable insert engineered for stable external and internal turning of heat-resistant alloys and other hard materials, offering a robust chipformer and secure clamping via a cylindrical hole. PVD-coated carbide AH8005 for long life ISO WNMG plate, trigon form, 80° shape 0.8 mm corner radius for precision turning Cylindrical-hole plate, 4.76 mm thickness Durable wear resistance for heat-resistant alloys The PVD-coated carbide grade AH8005 provides a hard, thin coating that reduces adhesion and oxidation at elevated cutting temperatures, which results in improved wear resistance and longer tool life when machining heat-resistant alloys and other tough materials. PVD (physical vapour deposition) creates a uniform layer that helps maintain the cutting edge under thermal stress; this supports stable cutting conditions and more consistent component tolerances during medium to heavy-duty turning. Geometry designed for repeatable surface quality A 0.8 mm corner radius combined with the WNMG 80° geometry balances edge strength and surface finish, making the insert suitable where dimensional stability and controlled roughness are required. The trigon plate form offers three effective cutting edges per indexable plate, while the 0° relief angle ensures compatibility with a wide range of holders designed for ISO WNMG plates. Corner radius selection affects both load capacity and finish: the 0.8 mm radius increases edge robustness while still enabling fine external and internal contours. System compatibility and secure clamping for production use The insert’s cylindrical hole design and standardised dimensions (ISO 080408) simplify interchangeability with matching external holders or boring bars, using the correct shim or clamping set and replacement screws. Plate thickness of 4.76 mm and standardised form factor help achieve stable clamping forces and repeatable seating. In practice, a turning system comprises the ISO insert, a suitable external holder or boring bar, a matching underlay or clamp set, and fastening hardware; correct pairing of chipbreaker and grade to workpiece material is essential for predictable chip control. Productivity and process reliability through predictable behaviour By combining a wear-resistant coating with a robust geometry and standardised form, this insert supports higher cutting speeds and reduced downtime through fewer index changes. Improved chip control from the HRM chipformer lowers the risk of built-up edge and interruptions, contributing to efficient cycle times and lower unit cost in continuous production. The standardised ISO design also simplifies stocking and rapid replacement, enhancing process security and reproducibility in series turning operations. For technical consultation on integrating the Tungaloy WNMG080408-HRM AH8005 into an existing turning cell or for material-specific recommendations, contact Metav Werkzeuge: info@metav-werkzeuge.com or call +49 2822 7131930 — our team will provide tailored advice and rapid availability. Technical data Article number: 6741703 Manufacturer SKU: TUN6741703 Model series: ISO turning indexable inserts Label / Name: WNMG080408-HRM AH8005 Facts ISO designation: 080408 Plate size: 08 Plate thickness: 4.76 mm Corner radius: 0.8 mm Shape/angle: 80° Relief angle: 0° Hole style: cylindrical hole Special features PVD-coated carbide grade AH8005 Chipbreaker type HRM Trigon plate form Suited for external and internal turning Compatible with standard WNMG holders Designed for heat-resistant alloys and hard materials FAQ What materials is this insert suited for? The AH8005 grade with PVD-coated carbide is developed for machining heat-resistant alloys and other hard materials, providing wear resistance and thermal stability for sustained turning operations. How does the 0.8 mm corner radius affect performance? A 0.8 mm radius increases edge strength and improves resistance to chipping under heavier cuts, while still enabling acceptable surface finish for general turning tasks. Is the insert compatible with standard WNMG holders? Yes, the ISO designation 080408 and the trigon form ensure compatibility with holders designed for WNMG plates, subject to matching form, relief angle and clamping method. What advantages does the HRM chipbreaker offer? The HRM chipformer provides controlled chip segmentation for stable removal and reduced risk of built-up edge, supporting uninterrupted machining cycles and consistent component quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080408 AH8015 Wendeplatten - Tungaloy
Benefit from the combination of PVD‑coated AH8015 carbide and a robust trigon geometry for consistent edge stability and dependable chip control in turning heat‑resistant alloys. Order the insert directly via Metav Werkzeuge or consult our specialists for application‑specific advice. WNMG 080408 AH8015 — ISO turning insert, trigon 80°, PVD‑coated carbide (Tungaloy) The WNMG080408-TSF AH8015 is an ISO‑standard trigon turning insert engineered for external and internal turning of heat‑resistant alloys, offering a balanced mix of wear resistance and cutting‑edge stability. PVD-coated carbide grade AH8015 Trigon profile, 80° cutting angle Corner radius 0.8 mm for edge stability Suitable for heat‑resistant alloys ISO 080408 format, 4.76 mm thickness Stable cutting performance for demanding alloys The combination of PVD‑coated surface treatment and carbide substrate in grade AH8015 delivers a reliable balance between abrasion resistance and edge strength. In practice this means longer tool life and fewer index changes when machining heat‑resistant alloys, where thermal loads and adhesion can rapidly degrade ordinary grades. The coating reduces built‑up edge formation and supports higher cutting speeds while maintaining dimensional consistency, which contributes to improved process efficiency and lower overall production cost. Clear guidance on holder compatibility and mounting The insert follows the ISO 080408 specification, so compatibility with a compatible holder depends on the insert form, trigon profile, 0° relief angle, tolerance class, fastening method, size and thickness. Correct seating and clamping are essential: the cylindrical hole must match the seat and screw system of the chosen outer holder or boring bar. Selecting the correct tolerance class and clamping components reduces vibration and improves repeatability, making the system more robust in series production. Geometry and how it affects machining results An 80° approach angle combined with a 0.8 mm corner radius supports a strong cutting edge that resists chipping during interrupted cuts and light roughing. The 4.76 mm thickness of the plate increases rigidity compared with thinner formats, helping to maintain surface finish and bore tolerance when turning under moderate overhang. These geometric traits translate directly into consistent part quality and reduced scrap rates when the machining setup is adjusted to the material and stability of the workpiece. Chip control and application recommendations The TSF chipbreaker is designed to provide controlled chip formation when machining tougher, temperature‑sensitive alloys. For best results, match the chipbreaker and grade to the workpiece material and the machine‑tool rigidity: more stable set‑ups permit higher feed and speed settings, while less rigid arrangements benefit from reduced depth of cut and conservative parameters. The balanced properties of this grade aid operators in achieving both process reliability and improved productivity across a range of turning tasks. For tailored cutting recommendations for Tungaloy turning inserts and to confirm holder compatibility with existing toolholders, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for swift, application‑specific guidance Technical data Article number: 6793739 SKU: 6793739-Tungaloy Manufacturer SKU: TUN6793739 Model series: ISO-Drehwendeschneidplatten Material: Carbide Facts Corner radius: 0.8 mm Plate thickness: 4.76 mm Cutting angle: 80° Clearance (relief) angle: 0° ISO designation: 080408 Insert size: 08 Special features Grade/coating: AH8015, PVD-coated carbide Chipbreaker: TSF Insert shape: Trigon Hole: with cylindrical hole Application: Turning; suitable for heat‑resistant alloys Compatibility: ISO format; depends on form, relief angle, tolerance class, clamping, size and thickness FAQ What materials is this insert best suited for? The WNMG080408-TSF AH8015 insert is optimised for heat‑resistant alloys, offering a balanced combination of wear resistance and edge strength for challenging materials. How does the TSF chipbreaker influence performance? The TSF chipbreaker promotes controlled chip formation under higher thermal loads, improving chip evacuation and supporting stable cutting when machining the specified alloys. Will this insert fit existing ISO holders? Compatibility follows the ISO 080408 format, but final fit depends on holder form, relief angle, tolerance class, clamping method, size and thickness; check these parameters before installation. What is the effect of the 0.8 mm corner radius in operation? A 0.8 mm corner radius provides a robust cutting edge that resists chipping during interrupted or semi‑roughing cuts while still allowing acceptable surface finish when feeds are chosen appropriately. Can the grade AH8015 be used at higher cutting speeds? The PVD‑coated AH8015 grade supports elevated cutting speeds compared with uncoated grades, but optimal parameters depend on machine rigidity, workpiece stability and coolant strategy; adjust settings to the specific application. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
WNMG 080408 AH8015 Wendeplatten - Tungaloy
WNMG 080408 AH8015 ISO-Drehwendeschneidplatte zum Drehen von Tungaloy Die WNMG 080408 AH8015 ist eine ISO-genormte trigonale Wendeschneidplatte für das Außen- und Innendrehen hitzebeständiger Legierungen mit ausgeglichener Kombination aus Verschleißfestigkeit und Schneidkantenstabilität. Hohe Verschleißfestigkeit durch PVD-Beschichtung Stabile Schneidkante für produktive Zerspanung Trigonform mit 0° Freiwinkel für vielseitigen Einsatz Zylindrisches Loch für sichere Befestigung Spanformer TF optimiert Spanbruch und Oberflächengüte Mehr Produktivität bei hitzebeständigen Legierungen Die PVD-beschichtete Wendeschneidplatte aus Hartmetall bietet eine ausgewogene Kombination aus Verschleißfestigkeit und Schneidkantenstabilität. Die Sorte AH8015 ist speziell für die allgemeine Bearbeitung hitzebeständiger Legierungen ausgelegt und ermöglicht damit höhere Standzeiten bei anspruchsvollen Schnittbedingungen. Durch die robuste Schneidkante lassen sich Vorschub und Schnitttiefe produktiver ausnutzen, was die Produktivität in Serienprozessen erhöht. Sichere Aufspannung und einfache Integration in den Prozess Die trigonale Plattenform mit zylindrischem Loch sorgt für zuverlässige Fixierung im Halter und vereinfacht den Wechselprozess. Kompatibilität zu ISO-Haltern wird durch Form, Freiwinkel, Toleranzklasse sowie Plattengröße und -dicke gewährleistet, sodass sich die Platte problemlos in bestehende Spannsysteme einfügt. Der 0° Freiwinkel bietet dabei eine gute Kombination aus Zerspanungsstabilität und Vielseitigkeit für Außen- und Innendrehoperationen. Zielgruppenorientierte Einsatzbereiche und einfache Begriffsklärung Werkstätten, Lohnfertiger und Serienproduzenten, die hitzebeständige Legierungen bearbeiten, profitieren besonders von dieser Wendeschneidplatte. Eine Wendeschneidplatte ist ein auswechselbares Schneidteil, das die eigentliche Materialabtragung übernimmt; der Spanformer TF bezeichnet dabei die geometrische Ausführung der Spanbrüche für kontrollierten Spanfluss. Diese WNMG-Ausführung eignet sich für Anwender, die zuverlässige Prozesssicherheit und reproduzierbare Ergebnisse verlangen. Wirtschaftlichkeit durch Standzeit und Prozesssicherheit Die Kombination aus hochwertigem Hartmetall und PVD-Beschichtung reduziert Werkzeugwechsel und Maschinenstillstand, was die Stückkosten senkt. Dank stabiler Schneidkante und optimiertem Spanverhalten sind konsistente Oberflächenqualitäten erreichbar, sodass Nachbearbeitungsaufwand minimiert wird. Für Produktionsumgebungen bedeutet das: mehr Teile pro Schicht bei gleichbleibender Qualität. Empfehlung: Für produktive Drehprozesse die WNMG 080408 AH8015 von Tungaloy direkt über Metav Werkzeuge anfragen – eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930. Produktmerkmale Artikelnummer: 6947509 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: WNMG080408-TF AH8015 Hersteller SKU: TUN6947509 Daten Eckenradius: 0.8 mm Plattendicke: 4,76 mm Plattengröße: 08 Winkel: 80° Freiwinkel: 0° Besonderheiten Material: Hartmetall Beschichtung: PVD-beschichtet Sorte: AH8015 (für hitzebeständige Legierungen) Spanformer: TF (optimierter Spanbruch) Plattenform: trigon Lochstil: zylindrisches Loch Einsatz: Drehen FAQ Für welche Werkstoffe ist die Platte geeignet? Die WNMG 080408 AH8015 von Tungaloy eignet sich besonders für hitzebeständige Legierungen; die Sorte AH8015 bietet eine gute Balance zwischen Verschleißfestigkeit und Schneidkantenstabilität. Welche Rolle spielt der Spanformer TF? Der Spanformer TF steuert den Spanbruch und sorgt für zuverlässigen Spanfluss, was die Oberflächengüte verbessert und die Maschinenverfügbarkeit erhöht. Wie wird die Platte befestigt? Die trigonale Platte verfügt über ein zylindrisches Loch zur sicheren Fixierung im ISO-Außenhalter oder in passenden Bohrstangen mit Unterlage und Klemmsatz. Ist die Platte für Innen- und Außenbearbeitung geeignet? Ja, die geometrische Auslegung und der Freiwinkel von 0° machen die Wendeschneidplatte sowohl für Außen- als auch für Innendrehoperationen einsetzbar. Welche Vorteile bringt die PVD-Beschichtung? Die PVD-Beschichtung erhöht die Verschleißfestigkeit der Schneidkante und trägt zu längeren Standzeiten bei, besonders unter höheren Temperaturen. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG 080408 AH8015 Wendeplatten - Tungaloy
WNMG 080408 AH8015 ISO-Drehwendeschneidplatten zum Drehen von Tungaloy WNMG 080408 AH8015 ist eine ISO-genormte Drehwendeschneidplatte für das Außen- und Innendrehen hitzebeständiger Legierungen und bietet ausgeglichene Verschleißfestigkeit sowie Schneidkantenstabilität PVD-beschichtetes Hartmetall AH8015 für lange Standzeit ISO-genormte WNMG-Form, einfache Holderkompatibilität Trigon-Form mit zylindrischem Loch für sichere Fixierung Eckenradius 0,8 mm für feine Oberflächenqualität Geeignet fürs Außen- und Innendrehen hitzebeständiger Legierungen Produktkern: Wirtschaftlichkeit und Standzeit sichern präzise Fertigung Die WNMG 080408 AH8015 kombiniert Hartmetall-Substrat und PVD-Beschichtung zu einer ausgewogenen Lösung für industrielle Zerspanung. Durch die optimierte Schneidkantenstabilität reduziert sich der Werkzeugwechselbedarf, was die Wirtschaftlichkeit pro Bearbeitung deutlich steigert. Die Platte wurde für produktive Mehrfachaufgaben entwickelt und bietet konstante Ergebnisse bei serieller Fertigung sowie verbesserten Teiledurchsatz. Material und Beschichtung erklärt: Was AH8015 leistet Die Sorte AH8015 ist ein PVD-beschichtetes Hartmetall, das speziell für die Bearbeitung hitzebeständiger Legierungen ausgelegt ist. PVD (Physikalische Gasphasenabscheidung) erzeugt eine dünne, haftfeste Beschichtung, die Verschleiß verringert und die Schneidkante schützt. Für Anwender bedeutet das: höhere Standzeit, stabilere Schnittbedingungen und gleichmäßigere Oberflächen bei anspruchsvollen Werkstoffen. Kompatibilität und Anwendungsempfehlung für sichere Prozesse Als ISO-genormte Wendeplatte ist die Formkompatibilität zu Haltern entscheidend; Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke bestimmen die Passung. Technische Kennwerte wie Winkel 80°, Freiwinkel 0° und Plattendicke 4,76 mm werden in der Halterauswahl berücksichtigt. Die Trigon-Form und das zylindrische Loch sichern die Fixierung und übertragen Schnittkräfte zuverlässig bei Außen- und Innendrehen. Zielgruppe und Einsatzszenarien: Praxistauglich für Fertigung und Lohnfertiger Werkstätten, Lohnfertiger und Serienproduzenten profitieren von der ausgewogenen Mischung aus Prozesssicherheit und Produktivität. Der HRM-Spanbrecher unterstützt stabile Spanbildung bei instabilen Werkstückaufbauten, während der Eckenradius 0,8 mm präzise Oberflächen ermöglicht. Wer konstante Werkzeugkosten, planbare Laufzeiten und reproduzierbare Ergebnisse sucht, findet in dieser Platte eine wirtschaftliche Lösung. Empfehlung: Die WNMG 080408 AH8015 von Tungaloy über Metav Werkzeuge beziehen und bei Bedarf technische Beratung per E‑Mail an info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 anfordern Produktmerkmale Artikelnummer: 6741704 Hersteller: Tungaloy Serie: ISO-Drehwendeschneidplatten Material: Hartmetall Hersteller SKU: TUN6741704 Bezeichnung: WNMG080408-HRM Fakten Eckenradius: 0,8 mm Winkel: 80° Freiwinkel: 0° Plattendicke: 4,76 mm Plattengröße: 08 Besonderheiten Plattenform: Trigon Loch: mit Loch Lochstil: zylindrisches Loch Spanbrecher: HRM (für hitzebeständige Legierungen optimiert) Sorte: AH8015 (PVD-beschichtetes Hartmetall) FAQ Für welche Werkstoffe ist die WNMG 080408 AH8015 am besten geeignet? Die WNMG 080408 AH8015 von Tungaloy ist speziell für hitzebeständige Legierungen ausgelegt; die AH8015‑Sorte bietet hier ein gutes Verhältnis von Verschleißfestigkeit zu Schneidkantenstabilität. Welche Rolle spielt der HRM‑Spanbrecher bei der Bearbeitung? Der HRM‑Spanbrecher sorgt für stabile Spanbildung, reduziert Ausbrüche an der Schneidkante und verbessert die Prozesssicherheit besonders bei instabiler Aufspannung oder langen Auskragungen. Wie wähle ich den passenden Halter für diese Wendeplatte aus? Die Kompatibilität richtet sich nach Form, Winkel, Toleranzklasse, Befestigungsart, Größe und Dicke; daher empfiehlt sich ein ISO‑konformer Außenhalter, der Winkel 80°, Plattendicke 4,76 mm und Trigon‑Form unterstützt. Kann die Platte für Innen- und Außenbearbeitung eingesetzt werden? Ja, die ISO‑genormte Trigon‑Form der WNMG 080408 AH8015 eignet sich für Außen‑ und Innendrehen, sofern der Halter die passende Aufnahme und das richtige Freiwinkelverhalten bietet. Welche Vorteile bringt die PVD‑Beschichtung AH8015 konkret in der Fertigung? Die PVD‑Beschichtung reduziert den Verschleiß an der Schneidkante, verlängert die Standzeit und sorgt für gleichmäßigere Oberflächen; das wirkt sich direkt auf die Fertigungskosten und die Maschinenlaufzeiten aus. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG 080408 AH8015 Wendeplatten - Tungaloy
WNMG 080408 AH8015 Drehwendeschneidplatte für Drehen von Tungaloy Die WNMG 080408 AH8015 ist eine ISO-genormte Drehwendeschneidplatte für Außen- und Innendrehen hitzebeständiger Legierungen, ausgelegt auf stabile Spanbildung und lange Standzeit. Universelle PVD-Beschichtung für Vielseitigkeit Trigonform für sichere Spanabfuhr Plattendicke 4,76 mm für hohe Stabilität Eckenradius 0,8 mm für präzise Konturgebung Hochwertiges Material sorgt für belastbare Schneidkante Die Wendeschneidplatte basiert auf Hartmetall mit PVD-Beschichtung der Sorte AH8015, die speziell für die Bearbeitung hitzebeständiger Legierungen entwickelt wurde. Durch die Kombination aus verschleißfestem Schneidstoff und dünner, hartschichtiger Oberfläche entsteht eine ausgewogene Balance zwischen Verschleißfestigkeit und Schneidkantenstabilität, wodurch längere Standzeiten und gleichmäßige Bearbeitungsergebnisse erzielt werden. Leistung und Anwendungsbereich für zuverlässige Prozesse Für das Außen- und Innendrehen bietet die Platte mit dem Spanbrecher PM eine Kontrolle der Späne bei variablen Schnittbedingungen. Die Auslegung eignet sich besonders für produktive Zerspanung hitzebeständiger Legierungen, wobei die Sorte AH8015 als erste Wahl für allgemeine Bearbeitung fungiert und eine breite Werkstoffabdeckung ermöglicht. Ein stabiler Spanfluss reduziert Stillstand und Nacharbeit. Systemkompatibilität und Einbaueigenschaften Die ISO-Normierung garantiert Kompatibilität zu gängigen Außenhaltern und Bohrstangen, wobei die Übereinstimmung von Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke entscheidend ist. Die Platte ist in Trigon ausgeführt, verfügt über ein zylindrisches Loch und einen Freiwinkel von 0°, wodurch die Fixierung sicher und die Kraftübertragung direkt erfolgt. Bei der Auswahl des Halters sollten diese Parameter berücksichtigt werden, um optimale Schneidgeometrie und Klemmsitz zu gewährleisten. Zielgruppe und wirtschaftlicher Vorteil im Fertigungsalltag Werkstätten und Serienfertiger profitieren von der Kombination aus stabiler Spanbildung und guter Standzeit, die die Werkzeugkosten pro Bauteil senkt. Die Wendeplatte unterstützt konstante Oberflächengüten und reduziert Rüstzyklen durch robuste Form und sichere Befestigung. Für Anwender, die Prozesssicherheit und Produktivität priorisieren, stellt diese Ausführung eine wirtschaftliche Lösung dar. *** Empfehlung: Vertrauen Sie auf die PVD-beschichtete Performance von Tungaloy und fordern Sie technische Beratung bei Metav Werkzeuge an – per E-Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930. *** Produktmerkmale Artikelnummer: 6947622 Marke: Tungaloy Bezeichnung: WNMG080408-PM SKU: TUN6947622 Serie: ISO-Drehwendeschneidplatten Fakten Eckenradius: 0,8 mm Winkel: 80° Freiwinkel: 0° Plattendicke: 4,76 mm Plattengröße: 08 Besonderheiten Material: Hartmetall Beschichtung: AH8015 (PVD, vielseitige Verschleißfestigkeit) Spanbrecher: PM (PM: universeller Spanbrecher für feine bis mittlere Späne) Plattenform: Trigon (trigonale Ausführung) Lochstil: zylindrisches Loch Anwendung: Drehen, Außen- und Innendrehen Systemaufbau: ISO-Drehplatte, kompatibel mit passenden Außenhaltern und Bohrstangen FAQ Welche Werkstoffe lassen sich mit der WNMG 080408 AH8015 bearbeiten? Die WNMG 080408 AH8015 von Tungaloy ist besonders für hitzebeständige Legierungen konzipiert; durch die AH8015-Sorte lassen sich jedoch auch viele Stahl- und legierte Werkstoffe wirtschaftlich bearbeiten. Wie beeinflusst der Spanbrecher PM die Bearbeitung? Der Spanbrecher PM sorgt für gleichmäßige Spanform und kontrollierte Abfuhr, was bei variierenden Schnittbedingungen die Prozesssicherheit erhöht und das Risiko von Spanverschraubung reduziert. Welche Rolle spielt der Freiwinkel 0° bei der Einspannung? Der Freiwinkel 0° unterstützt eine stabile Kraftübertragung zwischen Platte und Halter; bei empfindlichen Bauteilen sollte die Halterauswahl so erfolgen, dass Schnittkraft und Auflagefläche optimal zusammenwirken. Ist die Platte für Hochgeschwindigkeitsbearbeitung geeignet? Die PVD-beschichtete Hartmetall-Sorte AH8015 bietet eine gute Balance aus Verschleißfestigkeit und Schneidkantenstabilität; für extreme Hochgeschwindigkeitsanwendungen sind spezifische Sorten und Kühlschmiersysteme zu prüfen. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG 080408 AH8015 Wendeplatten - Tungaloy
Take advantage of the PVD-coated AH8015 grade and the 0.8 mm corner radius for a reliable balance of wear resistance and edge stability in turning operations; the ISO format ensures straightforward replacement and compatibility with standard holders. Order the WNMG080408-TS AH8015 directly via Metav Werkzeuge or ask the consultants if needed. WNMG 080408 AH8015 – ISO turning insert for general turning, PVD-coated carbide, trigon form by Tungaloy WNMG 080408 AH8015 is an ISO-format trigon insert designed for turning applications, optimised for heat-resistant alloys and general-purpose machining. ISO-format WNMG insert, trigon shape PVD-coated carbide grade AH8015 0.8 mm corner radius for strength and finish Cylindrical hole, 80° lead angle, 4.76 mm thickness Consistent cutting performance for demanding alloys The PVD-coated AH8015 grade provides a tuned balance between wear resistance and edge stability, making it a preferred choice for machining heat-resistant alloys where temperature and abrasion are critical. The combination of a robust substrate and surface coating extends tool life and reduces index changes, which supports more predictable cycle times and lower production interruptions. The design emphasises repeatable performance for batch and series production while maintaining secure cutting edges for both light and moderate interrupted cuts. Standardised geometry that simplifies tool logistics As an ISO-standard WNMG080408-TS insert in trigon format, the item benefits from widespread holder compatibility; compatibility is governed by form, clearance angle, tolerance class, fastening, size and thickness. The 80° lead angle and cylindrical hole provide stable clamping and accurate positioning in matched external holders and boring bars. Using a standardised insert format reduces storage complexity and simplifies changeover procedures on the shop floor, enabling faster set-up and consistent results across different machines. Surface quality and chip control tuned for turning The TS chipbreaker combined with the 0.8 mm corner radius supports controlled chip formation and a balance between surface finish and insert strength. The 4.76 mm thickness and trigon geometry contribute to mechanical rigidity, helping to damp vibration during external and internal turning. For finishing passes the corner radius helps achieve improved surface integrity, while the chipbreaker and coating work together to steer chips away from the cutting zone, which benefits both safety and cycle efficiency. For machining heat-resistant alloys with longer edge life, contact Metav Werkzeuge to source the Tungaloy WNMG080408-TS AH8015 insert or request application advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6947548 Manufacturer SKU: TUN6947548 SKU: 6947548-Tungaloy Model series: ISO turning indexable inserts Application: Turning Facts Insert designation: WNMG080408-TS Grade / coating: AH8015 (PVD-coated) Material: Carbide (cemented carbide) Corner radius: 0.8 mm Thickness: 4.76 mm Lead / wedge angle: 80° Clearance angle: 0° Size: 08 Special features Trigon plate form Cylindrical hole for screw clamping TS chipbreaker for controlled chips Intended for heat-resistant alloys and general turning ISO-normed geometry for broad holder compatibility FAQ What materials is the insert suitable for? The WNMG080408-TS AH8015 is formulated for heat-resistant alloys and general-purpose turning; the PVD-coated AH8015 grade balances wear resistance and cutting-edge stability for such materials. How is holder compatibility determined for this insert? Compatibility depends on the insert form, clearance angle, tolerance class, fastening method, size and thickness; the ISO WNMG format ensures broad compatibility with matching external holders and boring bars. What benefit does the TS chipbreaker provide? The TS chipbreaker on this insert promotes stable chip formation and improved evacuation, supporting safer machining and more consistent surface quality during turning passes. How does the 0.8 mm corner radius affect results? A 0.8 mm corner radius increases edge strength and contributes to improved surface finish on finishing passes; it also helps absorb minor vibration compared with finer radii. Which system components are required to assemble the cutting system? A complete system comprises the ISO turning insert, a compatible external holder or boring bar, a shim/clamping pad and the correct clamp screw set for secure fastening Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080408 AH8015 Wendeplatten - Tungaloy
Take advantage of a PVD-coated carbide grade optimised for heat-resistant alloys, the ZM chipbreaker tailored for stable chip control, and the precise 80° trigon geometry to maintain cycle time and surface quality; order the WNMG080408-ZM AH8015 turning insert directly via Metav Werkzeuge or consult our technical advisors for application support. WNMG080408 AH8015 turning insert (ISO WNMG 080408) for turning – Tungaloy WNMG080408-ZM AH8015 is an ISO trigon turning insert designed for external and internal turning, offering a PVD-coated carbide grade suited to heat-resistant alloys and demanding production environments. ISO trigon form, 80° cutting angle PVD-coated carbide AH8015 ZM chipbreaker for heat-resistant alloys 0.8 mm corner radius for consistent finishes High productivity on heat-resistant alloys with balanced wear resistance The insert combines a PVD-coated AH8015 grade with a ZM chipbreaker, delivering a well-balanced mix of wear resistance and edge stability for challenging alloys. This configuration reduces unplanned tool changes and supports longer uninterrupted runs, which improves process economics. The coating increases thermal tolerance and reduces adhesion at the cutting edge, meaning fewer profile rebuilds and steadier machining of temperature-sensitive materials. Geometry and clearance for repeatable surface quality and secure clamping Featuring an 80° trigon geometry and a clearance angle of 0°, the insert provides reliable seat fit and consistent engagement with matching holders. The trigon form and a 0.8 mm corner radius contribute to predictable cutting forces and allow modest feed rates while maintaining good surface integrity. Clear definition between insert thickness and locating features ensures stable clamping and reduces vibration, translating into repeatable component tolerances in series production. System compatibility and easy process integration This item is part of the ISO turning insert family and is compatible with holders when matching form, clearance angle, tolerance class, fixing method, size and thickness. The insert is supplied in a system context that typically includes a suitable external holder or boring bar, support pads/clamping sets and spare screws for simple replacement. Using standardised ISO designations simplifies stocking and ensures quick changeovers across toolsets, supporting flexible production planning. For stable and economical machining performance choose Tungaloy AH8015 inserts — order via Metav Werkzeuge or contact our specialists at info@metav-werkzeuge.com or +49 2822 7131930 for tailored application advice and compatibility checks Technical data Article number: 6947588 SKU: 6947588-Tungaloy Manufacturer SKU: TUN6947588 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Application: Drehen Facts Corner radius: 0.8 mm Plate thickness: 4.76 mm Cutting angle: 80° Clearance angle: 0° Size designation: 08 Special features ISO designation: WNMG080408-ZM Grade/coating: AH8015 (PVD-coated carbide) Chipbreaker: ZM Plate form: trigon Hole: with cylindrical hole Typical system components: compatible holder, clamping set, replacement screws Typical use: external and internal turning; suited to heat-resistant alloys FAQ What materials is this insert best suited for? The WNMG080408-ZM AH8015 insert is optimised for machining heat-resistant alloys; the PVD-coated AH8015 grade balances wear resistance and edge stability for those materials. How does the ZM chipbreaker influence performance? The ZM chipbreaker on this insert promotes controlled chip formation during turning, improving process security and reducing risk of chip-related interruptions when using the AH8015 grade. Which geometric features improve surface finish? The trigon form with an 80° cutting angle and a 0.8 mm corner radius support stable cutting conditions and predictable contact, helping to maintain consistent surface quality in serial production. Is the insert compatible with standard ISO holders? Yes; the insert follows ISO specifications, and compatibility depends on matching form, clearance angle, tolerance class, fixing method, size and thickness with the chosen holder or boring bar. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080408 AH8015 Wendeplatten - Tungaloy
WNMG080408 AH8015 ISO-Drehwendeschneidplatte für Drehen von Tungaloy WNMG080408 AH8015 bietet präzise Zerspanungslösungen für Außen- und Innendrehen mit hoher Prozessstabilität ISO-genormt für standardisierte Halter PVD-beschichtetes Hartmetall AH8015 HRF-Spanbrecher für hitzebeständige Legierungen Trigonform mit 80° Schnittwinkel Mit zylindrischem Loch und 0,8 mm Radius Hervorragende Verschleißfestigkeit durch Beschichtung Die Kombination aus Hartmetall und PVD-Beschichtung sorgt für eine deutlich erhöhte Verschleißfestigkeit bei der Bearbeitung hitzebeständiger Legierungen. Das Materialbild ist ausgeglichen zwischen Schneidkantenstabilität und Zähigkeit, wodurch sich die Standzeit in Serienprozessen verbessert. Für Anwender bedeutet das weniger Werkzeugwechsel und konstantere Teilequalität bei längeren Einsatzintervallen. Optimierte Spanformung und Schneidkantenstabilität Der HRF-Spanbrecher ist speziell auf die spanhemmenden Eigenschaften hitzebeständiger Werkstoffe ausgelegt und reduziert Spitzenkräfte sowie Vibrationen. Dadurch lassen sich gleichmäßigere Oberflächen erreichen und die Produktausbeute steigt. Gleichzeitig unterstützt die Trigon-Form mit 80° Schnittwinkel stabile Spanabfuhr auf Außen- und Innendrehzyklen. Passgenauigkeit und Einbau in ISO-Systeme Die Platte ist ISO-genormt und kompatibel zu Standard-Außenhaltern und Bohrstangen; die Passform wird über Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke definiert. Die Plattendicke von 4,76 mm und das zylindrische Loch vereinfachen sicheren Sitz und Wiederholgenauigkeit beim Plattenwechsel, was Rüstzeiten reduziert und den Produktionsfluss unterstützt. Wirtschaftlichkeit und Anwendungsempfehlung Für die allgemeine Bearbeitung hitzebeständiger Legierungen ist die Sorte AH8015 die erste Wahl, da sie ein ausgewogenes Verhältnis von Kosten und Leistung bietet. Die Platte eignet sich für Serienfertigung und Einzelteile gleichermaßen, insbesondere wenn konstante Konturoberflächen und Prozesssicherheit gefragt sind. Anwender profitieren von planbaren Standzeiten und gleichbleibender Werkzeugperformance. Für produktive Zerspanung hitzebeständiger Legierungen die AH8015-Wendeplatte wählen und bei Fragen Metav Werkzeuge kontaktieren: info@metav-werkzeuge.com, +49 2822 7131930 Produktmerkmale Artikelnummer: 6741700 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: WNMG080408-HRF AH8015 Daten Radius: 0,8 mm Winkel: 80° Plattendicke: 4,76 mm Plattengröße: 08 Besonderheiten Material: Hartmetall Beschichtung: PVD-beschichtet (verbessert Verschleißfestigkeit) Sorte: AH8015 (ausgewogen für hitzebeständige Legierungen) Spanbrecher: HRF (optimiert für spanhemmende Werkstoffe) Plattenform: Trigon Loch: zylindrisches Loch Freiwinkel: 0° ISO-genormt FAQ Welche Werkstoffe sind für die Wendeplatte geeignet? Die WNMG080408 AH8015 von Tungaloy ist primär für die Bearbeitung hitzebeständiger Legierungen konzipiert; durch die ausgewogene Hartmetallkombination eignet sich die Platte für eine breite Palette anspruchsvoller Stähle und Legierungen. Wie beeinflusst der HRF-Spanbrecher die Oberfläche? Der HRF-Spanbrecher formt die Späne kontrolliert und reduziert Vibrationen, was zu gleichmäßigeren Oberflächen und stabilerem Zerspanungsverhalten führt. Welche Vorteile bringt die PVD-Beschichtung bei der Sorte AH8015? Die PVD-Beschichtung erhöht die Verschleißfestigkeit der Schneidkante, verbessert die Wärmebeständigkeit und verlängert die Standzeit unter thermisch belasteten Schnittbedingungen. Ist die Platte kompatibel mit Standardhaltern? Ja, die WNMG080408-HRF AH8015 ist ISO-genormt und passt in gängige Außenhalter und Bohrstangen, vorausgesetzt Form, Größe und Befestigung stimmen mit dem Halter überein. Welche Rolle spielt der 0,8 mm Eckenradius? Der Eckenradius von 0,8 mm bietet einen Kompromiss zwischen Schnittstabilität und Konturgenauigkeit, ideal für universelle Drehanwendungen mit moderaten Schnittkräften. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG 080408 AH8015 Wendeplatten - Tungaloy
Take advantage of a balanced combination of PVD‑coated carbide and a 0.8 mm corner radius for dependable tool life and consistent part quality in turning applications; order the inserts via Metav Werkzeuge or consult our specialists for holder compatibility and optimal chipbreaker selection. WNMG080408-DM AH8015 — WNMG 080408 AH8015 Trigon ISO turning insert by Tungaloy, PVD‑coated carbide The WNMG080408-DM AH8015 is an ISO trigon indexable insert for general turning, designed for machining heat‑resistant alloys with a balance of wear resistance and edge stability. ISO trigon geometry for standard holders PVD‑coated carbide AH8015 grade 0.8 mm corner radius for robust cutting edge Cylindrical hole fixation, 4.76 mm plate thickness Consistent cutting performance for demanding turning This ISO‑compliant trigon insert delivers predictable cycle times through the combination of a PVD‑coated carbide substrate and the AH8015 grade, chosen as a first option for machining heat‑resistant alloys. The coating improves surface hardness and wear behaviour at elevated temperatures, while the substrate maintains edge stability under interrupted cuts. For manufacturers seeking repeatable productivity, the insert reduces unplanned tool changes and supports steady component quality by extending service intervals. Secure mounting and straightforward compatibility reduce setup time Compatibility with a cutting tool holder depends on geometry factors such as form, relief angle, tolerance class, fixation and thickness; the trigon shape and cylindrical hole ensure reliable clamping in standard ISO holders. The insert’s 4.76 mm plate thickness and standard dimensions simplify selection of a matching external holder or boring bar, minimising setup complexity. Choosing the correct chipbreaker and grade according to material and machining stability results in efficient swarf control and fewer stoppages for rework. Edge geometry that balances strength and surface finish The 0.8 mm corner radius produces a mechanically robust cutting edge that tolerates higher cutting forces and improves edge life, while the 0° relief provides predictable contact behaviour on the workpiece. This geometry is particularly effective when a stable finish is required on parts from heat‑resistant alloys; the larger radius strengthens the edge but calls for modest feed values to preserve surface quality. The trigon insert also offers multiple indexable edges, enabling economical use and quick re‑indexing when renewal is necessary. Cost‑effective grade selection with process security The AH8015 grade is formulated for a wide material range and represents an economical choice where a compromise between wear resistance and edge toughness is required. For production environments aiming to reduce tool inventory complexity, this grade simplifies grade selection across similar alloys and machining styles. Where tighter tolerances or higher productivity are demanded, the combination of chipbreaker DM and the AH8015 coating/substrate pairing helps maintain consistent results and predictable tool life. For tailored recommendations on holder matching, chipbreaker selection and to obtain Tungaloy WNMG080408-DM AH8015 inserts contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants will advise on the best setup for the intended turning application. Technical data Article number: 6947609 Manufacturer SKU: TUN6947609 SKU: 6947609-Tungaloy Facts Corner radius: 0.8 mm Plate thickness: 4.76 mm Insert angle: 80° Relief angle: 0° Plate size: 08 Special features Grade: AH8015 Coating: PVD Material: carbide Chipbreaker: DM Plate form: trigon Fixation: cylindrical hole Typical use: turning of heat‑resistant alloys FAQ Which materials is this insert best suited for? The WNMG080408-DM AH8015 insert is optimised for heat‑resistant alloys; the AH8015 grade balances wear resistance and edge stability for general turning tasks. How is the insert fixed in the holder? Fixation is via a cylindrical hole and standard ISO trigon geometry, compatible with holders designed for WNMG‑type inserts and matching tolerance classes. What does the DM chipbreaker do? The DM chipbreaker provides general‑purpose chip control suitable for a range of turning operations; it facilitates manageable swarf and supports consistent surface quality. How does the 0.8 mm corner radius affect performance? A 0.8 mm radius increases edge strength and resistance to chipping, beneficial for interrupted cuts and tougher materials; it requires appropriate feed settings for the desired surface finish. Is the insert indexable and economical to use? Yes — the trigon shape offers multiple cutting edges per insert, enabling economical re‑indexing and longer productive life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080408 AH8015 Wendeplatten - Tungaloy
Benefit from the balanced wear resistance of the PVD-coated AH8015 grade and the robust 0.8 mm corner radius for stable, cost-effective turning; select the ISO WNMG080408-TH insert for demanding tasks and order directly via Metav Werkzeuge or ask our consultants for application support. WNMG 080408 AH8015 turning insert, PVD-coated cemented carbide by Tungaloy A WNMG080408-TH AH8015 ISO turning insert designed for external and internal turning of heat-resistant alloys and general-purpose machining. ISO WNMG080408 trigon insert PVD-coated cemented carbide AH8015 0.8 mm corner radius for stable cuts TH chipbreaker for controlled chip formation Reliable cutting performance for demanding turning operations The PVD-coated cemented carbide grade AH8015 offers a balanced combination of wear resistance and edge stability, making it a dependable choice for machining heat-resistant alloys and mixed-material batches. The coating extends tool life under thermal load while the substrate maintains a strong cutting edge, resulting in consistent surface quality and fewer insert changes. This leads directly to reduced machine downtime and improved process predictability in production environments where repeatability and throughput are critical. Fast integration and secure clamping for efficient setups Compatibility with toolholders is governed by form, clearance, tolerance class, fastening, size and thickness; the trigon form and 80° angle of this ISO insert ensure stable clamping in standard external holders and suitable boring bars. The insert features a cylindrical hole for secure fixation, a 4.76 mm thickness that provides rigidity, and a 0° clearance that supports precise axial engagement. When paired with the correct holder, shim and clamping set plus spare screws, set‑up times are reduced and machining accuracy improves, enabling more predictable cycle times and less trial-and-error during tool changes. Economical machining by design and informed selection The 0.8 mm corner radius and TH chipbreaker are engineered to balance strength and finish: the radius reinforces the cutting edge under intermittent cuts while the chipbreaker helps form controllable chips for safe evacuation. Choosing this grade for turning operations helps to avoid premature edge chipping and stabilises wear progression, which translates into lower tooling costs per component and higher overall efficiency. If material, operation type or machine dynamics are uncertain, Metav Werkzeuge can advise on the optimal chipbreaker and holder combination to match the application. Contact Metav Werkzeuge for application advice, stock availability or tailored recommendations for the Tungaloy WNMG080408-TH AH8015 inserts via info@metav-werkzeuge.com or phone +49 2822 7131930 Technical Data Article number: 6793743 Manufacturer SKU: TUN6793743 SKU: 6793743-Tungaloy Series: ISO turning inserts Designation: WNMG080408-TH AH8015 Facts Corner radius: 0.8 mm Thickness: 4.76 mm Clearance angle: 0° Insert size: 08 ISO code: 080408 Angle: 80° Special features Material: cemented carbide Coating/grade: AH8015 (PVD-coated) Shape: trigon Chipbreaker: TH Hole: with cylindrical hole Application: Turning (external and internal) FAQ What materials is this insert best suited for? The Tungaloy WNMG080408-TH AH8015 insert is optimised for machining heat-resistant alloys and offers a balanced solution for mixed alloy batches where wear resistance and edge stability are required. How does the 0.8 mm corner radius affect results? A 0.8 mm corner radius increases edge strength and helps resist chipping under intermittent loads, improving the insert’s life and contributing to a more consistent surface finish with the AH8015 grade. Will this insert fit standard holders? Compatibility depends on form, clearance, tolerance class, fastening, size and thickness; the ISO WNMG080408 form and trigon geometry are compatible with holders and boring bars designed for WNMG inserts when matched by those parameters. What are the benefits of the AH8015 PVD coating? The AH8015 grade combines a PVD coating with a carbide substrate to enhance wear resistance and maintain cutting-edge stability, which supports longer tool life and more predictable machining performance. When should the TH chipbreaker be selected? The TH chipbreaker is suited for controlled chip formation in general turning operations; selection should be based on workpiece material, machining strategy and machine stability to achieve the best combination of surface finish and chip control. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080408 AH905 Wendeplatten - Tungaloy
WNMG 080408 AH905 Drehwendeschneidplatte für Drehen · Tungaloy Die WNMG080408-HMM AH905 ist eine ISO-genormte Drehwendeschneidplatte für präzises Außen- und Innendrehen mit hoher Prozesssicherheit. PVD-beschichtetes Hartmetall, hohe Standzeit Scharfe Schneidkante für prozesssichere Ergebnisse ISO-genormte Form WNMG, einfache Halterkompatibilität Trigon Form mit zylindrischem Loch für Stabilität Eckenradius 0,8 mm für präzise Schnittführung Höhere Produktivität durch verlässliche Prozesssicherheit Mit dem Fokus auf Prozesssicherheit und stabiler Spanbildung bietet diese Wendeschneidplatte konkrete Effizienzvorteile. Die Kombination aus scharfer Schneidkante und der Sorte AH905 sorgt für konstante Zerspanungsergebnisse, wodurch Rüstzeiten reduziert und Ausschuss minimiert werden. Dies steigert die Produktivität in Serien- und Einzelfertigung spürbar. Material und Beschichtung für lange Standzeiten Die Platte besteht aus Hartmetall und ist PVD-beschichtet, was die Verschleißfestigkeit deutlich erhöht. PVD steht für Physical Vapor Deposition und erzeugt eine dünne, harte Schicht, die Ausbrüche reduziert und die Schneidkante länger scharf hält. Dadurch werden Standzeit und Werkzeugkosten im Fertigungsprozess positiv beeinflusst. Präzision durch Form und Radius Die trigonale Plattenform kombiniert mit dem Eckenradius 0,8 mm ermöglicht exakte Schnittführung und saubere Oberflächen. Anwender, die feine Zustellungen und stabile Schnitte benötigen, profitieren von der Formstabilität und der zylindrischen Lochbohrung, die in Verbindung mit passenden Haltern vibrationsarme Bearbeitung gewährleistet. ISO-Kompatibilität und einfache Integration in den Prozess Als ISO-genormte Wendeschneidplatte ist die Kompatibilität zu Haltern durch Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke definiert. Vorhandene Halter können in der Regel weiterverwendet werden, solange Form und Abmessungen übereinstimmen. Die klare Systemstruktur erleichtert die Ersatzteilversorgung und reduziert Umrüstaufwand. Für zuverlässige Drehprozesse empfehlen wir die WNMG080408-HMM AH905 von Tungaloy; bei Fragen stehen Ihnen Metav Werkzeuge per E-Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 gern zur Verfügung Produktmerkmale Artikelnummer: 6859438 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: WNMG080408-HMM Hersteller SKU: TUN6859438 Daten Radius: 0,8 mm Winkel: 80° Plattendicke: 4,76 mm Plattengröße: 08 Besonderheiten Material: Hartmetall Beschichtung: PVD-beschichtet (PVD: dünne, harte Schutzschicht) Sorte: AH905 (verschleiß- und ausbruchsfest) Spanbrecher: HMM (optimierter Spanformer) Freiwinkel: 0° Loch: mit Loch, zylindrisches Loch Plattenform: Trigon Anwendung: Drehen Kompatibilität: ISO-genormt FAQ Für welche Bearbeitungen eignet sich die Platte besonders? Die WNMG080408-HMM AH905 von Tungaloy eignet sich vor allem für Außen- und Innendrehen, bei denen Prozesssicherheit und scharfe Schneidkanten gefragt sind; die Sorte AH905 bietet verschleiß- und ausbruchfeste Performance. Welche Vorteile bringt die PVD-Beschichtung? Dank der PVD-Beschichtung der WNMG080408-HMM AH905 erhöht sich die Verschleißfestigkeit der Schneidkante, was zu längeren Standzeiten und konstanteren Bearbeitungsergebnissen führt. Wie wichtig ist der Eckenradius für die Anwendung? Der Eckenradius 0,8 mm beeinflusst die Schnittaufgabe direkt: Er erlaubt präzise Schnittführung und saubere Oberflächen, besonders bei feinen Zustellungen und anspruchsvoller Oberflächenanforderung. Wie stelle ich die Kompatibilität mit vorhandenen Haltern sicher? Prüfen Sie Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke gegen die Halterangaben; die ISO-genormte WNMG-Form erleichtert die Auswahl kompatibler Halter. Eignet sich die Platte für Serienfertigung? Ja, die Kombination aus Hartmetall und PVD-Beschichtung sowie die stabile Spanbildung durch den HMM-Spanbrecher machen die WNMG080408-HMM AH905 von Tungaloy besonders für produktive Serienfertigung geeignet. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG 080408 AT9530 Wendeplatten - Tungaloy
Achieve consistent finishing and extended tool life with the combination of the coated cermet AT9530 and the 0.8 mm corner radius, optimised for light and finishing turning of steel. The ISO WNMG geometry and 0° relief ensure broad compatibility with standard holders and simple replacement logistics. Order the WNMG080408-TQ AT9530 inserts directly via Metav Werkzeuge or consult our technical team for application advice. WNMG 080408 AT9530 — Trigon turning insert for finishing and light turning by Tungaloy WNMG080408-TQ AT9530 is an ISO-standard trigon turning insert engineered for finishing and light turning of steel components, prioritising surface quality and uniform wear behaviour. ISO trigon insert WNMG 080408 for turning Coated cermet grade AT9530 for fine finishes 0.8 mm corner radius for consistent surface quality Compatible with standard WNMG external holders Deliver consistent surface quality with a cermet-focused grade The coated cermet AT9530 emphasises surface finish and uniform wear, making the insert particularly suited to finishing and light machining operations on steel. The combination of a 0.8 mm corner radius and the trigon geometry promotes stable cutting engagement and reduces the tendency for edge chipping under steady feed conditions. Being a coated cermet, the grade provides better resistance to built-up edge and delivers a predictable wear curve; this supports higher first-pass quality and reduces secondary operations. For shops aiming to improve part finish without increasing cycle time, this configuration offers a measurable improvement in process reliability. Designed for straightforward integration into ISO tool systems The insert follows ISO designation and the WNMG form, so compatibility with existing toolholders is determined by form, relief angle, tolerance class, fastening, size and thickness. The included cylindrical hole and standard thickness of 4.76 mm allow direct mounting in many WNMG external holders and boring bars designed for the 08 size. The 0° relief contributes to conservative cutting geometry that is easy to set up and repeat, while the trigon shape maximises clearance in tight workpiece envelopes. For system assembly, the usual components are an ISO insert, a matched external holder or boring bar, a shim/clamp set, and spare clamping screws. Improve productivity with fit-for-purpose chip control and grade selection The TQ chipbreaker is intended for finishing and light machining tasks and, in combination with the AT9530 grade, supports stable chip formation and predictable tool wear. Selecting this insert helps reduce rework and prolongs effective tool life under defined conditions, which lowers cost per part and machine downtime. While optimised for steel finishing, the indexable insert is part of a broader model series that permits choosing alternate chipbreakers and grades depending on workpiece material and machine stability. For interrupted cuts or heavy roughing, a different geometry or a tougher grade would be preferable; the present configuration is tuned for precision and surface integrity rather than aggressive material removal. For application support, availability or to secure WNMG080408-TQ AT9530 inserts from Tungaloy, contact Metav Werkzeuge for rapid supply and expert guidance via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6773718-Tungaloy Manufacturer SKU: TUN6773718 Manufacturer article number: 6773718 Model series: ISO turning indexable inserts Material: cemented carbide Core data Corner radius: 0.8 mm Thickness: 4.76 mm Included angle: 80° Clearance angle: 0° Size designation: 08 Hole style: cylindrical hole Special features Trigon plate form (WNMG) Coated cermet grade AT9530 Chipbreaker: TQ Application: turning (external and internal, finishing & light machining) ISO-compliant geometry and mounting Compatible with standard WNMG holders and boring bars FAQ Which materials is the WNMG080408-TQ AT9530 intended for? The WNMG080408-TQ AT9530 insert is primarily designed for finishing and light machining of steel, with the AT9530 cermet grade focused on surface quality and even wear behaviour. Which holders and systems fit this indexable insert? Compatibility depends on form, relief angle, tolerance class, fastening, size and thickness; the WNMG 08 form fits standard WNMG external holders and boring bars that accept 08-size trigon plates with a cylindrical hole. What surface finish can be expected with this configuration? With the AT9530 cermet coating, TQ chipbreaker and a 0.8 mm corner radius, the insert delivers improved surface integrity and reduced edge-related defects compared with roughing grades, making it suitable where high finish quality is required. Is this insert suitable for heavy roughing or interrupted cuts? This insert is optimised for finishing and light machining; for heavy roughing or aggressive interrupted cuts a tougher grade or a different geometry is recommended. What key dimensions and features should be checked before ordering? Check corner radius (0.8 mm), thickness (4.76 mm), plate form (trigon WNMG), chipbreaker (TQ), grade (AT9530), clearance angle (0°) and hole style (cylindrical hole) to ensure fit and application match. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080408 AT9530 Wendeplatten - Tungaloy
Benefit from a combination of consistent surface quality, a coated cermet grade optimised for finishing and a precise 80° trigon geometry with a 0.8 mm corner radius for stable tool life and predictable wear. Order the WNMG080408-TS AT9530 directly via Metav Werkzeuge or ask our consultants if needed. WNMG 080408 AT9530 — ISO turning insert for finishing, 80° trigon by Tungaloy A WNMG080408-TS AT9530 insert designed for finishing and light turning of steel, offering a coated cermet grade for improved surface quality and even wear. ISO trigon, 80° geometry for stable cutting Coated cermet AT9530 for superior surface finish 0.8 mm corner radius for precise contour control Consistent surface quality through tailored cermet technology The coated cermet grade AT9530 delivers fine-grain cutting behaviour that prioritises surface finish and uniform abrasion resistance. In practical terms, the insert reduces the need for secondary machining by producing more consistent part faces and minimising topographic irregularities. The trigon platform and 80° cutting geometry support axial stability during light finishing passes, which helps maintain dimensional tolerances over longer production runs. Reliable tool life and predictable wear for process stability The TS chipbreaker combined with the coated cermet substrate promotes even wear rather than abrupt edge failure, allowing for predictable tool-change intervals and simplified process planning. The 0.8 mm corner radius offers a balance between edge strength and fine detail, enabling controlled feed and reduced chatter on interrupted or finishing cuts. Overall, this supports higher uptime and fewer unexpected interruptions in turning operations. Simple integration into ISO tool systems and versatile application Designed as an ISO-standard turning insert, the component fits established holder types when form, clearance, tolerance class, fixing and thickness match. The trigon shape with a cylindrical hole and a plate thickness of 4.76 mm suits many common clamping systems; compatibility is determined by insert form and holder specifications. This makes the insert suitable for a wide range of finishing and light machining tasks on steel, supporting efficient set-up within existing tool inventories. For specific cutting data, grade recommendations or to request a tailored application check for the Tungaloy WNMG080408-TS AT9530, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6773714 SKU: 6773714-Tungaloy Manufacturer article number: 6773714 Manufacturer SKU: TUN6773714 Core data ISO designation: 080408 Plate size: 08 Plate thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Insert geometry angle: 80° Hole: with hole Hole style: cylindrical Special features Coated cermet grade AT9530 Chipbreaker: TS Plate form: trigon Typical application: finishing and light turning of steel Material: Hartmetall System build: ISO turning insert for use with matching holder, backing/clamping set and replacement screws FAQ What materials is this insert intended for? The insert is tailored for finishing and light turning of steel; the AT9530 coated cermet is chosen to optimise surface finish and even wear when machining steel. Is the WNMG080408-TS AT9530 compatible with standard ISO holders? Compatibility depends on holder form, clearance, tolerance class, fixing method, size and thickness; the WNMG080408-TS follows ISO geometry and fits holders matching those parameters. What advantages does the AT9530 grade offer compared with standard carbide? AT9530’s coated cermet composition emphasises improved surface quality and uniform abrasion behaviour, which can reduce rework and extend effective tool life during finishing passes. Which chipbreaker is supplied and what benefit does it provide? The TS chipbreaker promotes controlled chip formation and stable cutting conditions, supporting consistent process behaviour and predictable tool-life characteristics. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080408 AT9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing performance, consistent wear behaviour and straightforward ISO compatibility for efficient turning operations; order via Metav Werkzeuge or consult our technical team for application advice. WNMG 080408 AT9530 — WNMG080408-TSF AT9530 turning insert by Tungaloy — coated cermet, 0.8 mm corner radius A WNMG080408-TSF AT9530 ISO turning insert designed for finishing and light turning of steel, prioritising excellent surface quality and uniform wear. Coated cermet grade AT9530 for fine finish 0.8 mm corner radius for controlled edge strength Trigon geometry with cylindrical hole for secure seating Chipbreaker TSF optimised for finishing cuts Achieve consistently high surface quality with a coated cermet grade The AT9530 grade is a coated cermet engineered for finishing and light machining of steel, delivering a visible improvement in surface texture and predictable wear patterns. Cermet compositions combine ceramic hardness with metallic toughness, which supports low built-up edge and stable cutting during finishing passes. This results in fewer rework cycles and a more reliable part finish when high geometrical tolerances and surface integrity are demanded. Geometry and mounting for repeatable results on ISO systems The trigon shape and cylindrical hole provide a compact, repeatable location in compatible ISO holders; compatibility is established by form, 0° clearance, tolerance class, mounting and thickness. The 0.8 mm corner radius balances edge strength and fine-profile reproduction, while the TSF chipbreaker promotes manageable chip formation under finishing conditions. These features together make the insert straightforward to integrate into existing toolsets and predictable in performance across a variety of turning set-ups. Process reliability that supports productive machining Using an insert from the ISO turning insert family ensures interchangeability and a clear system approach: matching insert, appropriate external holder or boring bar, and correct clamping hardware. The combination of carbide substrate and coated cermet grade leads to consistent wear, reducing the need for frequent insert changes and stabilising cycle times. For production runs where surface finish and repeatability are priorities, this insert reduces process variance and contributes to higher first-pass yield. For technical sizing, availability and recommendations tailored to specific turning tasks with Tungaloy inserts, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our specialists will advise on holder compatibility and batch supply options. Technical data Article number: 6773712 SKU: 6773712-Tungaloy Label: WNMG080408-TSF AT9530 Model series: ISO turning inserts Numbers / Core data Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 0° Included angle: 80° Insert size: 08 Special features / Applications Material: carbide Grade: AT9530 (coated cermet) Chipbreaker: TSF Shape: trigon Hole: cylindrical Application: turning, finishing and light machining of steel Compatibility: ISO holders (form, clearance, tolerance, mounting, size, thickness) FAQ Which materials is this insert intended for? This insert is designed primarily for finishing and light machining of steel; the AT9530 coated cermet grade focuses on achieving improved surface finish and even wear. What is the corner radius and why is it important? The corner radius is 0.8 mm, which offers a compromise between edge strength and the ability to reproduce fine external profiles during finishing passes. Is the insert compatible with standard ISO toolholders? Yes — the insert follows ISO designation and fits ISO-compatible holders when the holder matches form, clearance, tolerance class, mounting, size and thickness; refer to the system build guidance for correct assembly. How does the AT9530 grade influence tool life and part quality? The AT9530 coated cermet promotes a finer surface finish and more uniform wear compared with many uncoated options, which supports consistent part quality and predictable tool-change intervals. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080408 GH330 Wendeplatten - Tungaloy
Take advantage of a balanced combination of productivity and edge stability: the ISO trigon design with a 0° clearance and GH330 grade carbide delivers consistent turning performance and predictable tool life. Order the inserts directly via Metav Werkzeuge or consult the team for application-specific recommendations. WNMG 080408 GH330 — ISO WNMG trigon turning insert, 0° clearance (Tungaloy) The WNMG080408-SS GH330 is an ISO trigon indexable insert for turning, engineered to provide reliable chip control and durable cutting-edge behaviour in general turning applications. ISO WNMG trigon insert, size 080408 GH330 grade for wear resistance and toughness 0° clearance for stable external and internal turning Cylindrical hole for secure clamping Boosts machining throughput with consistent cutting performance The combination of ISO conformity and a trigon geometry ensures repeatable insert indexing and straightforward integration into established tool systems. The GH330 grade optimises the balance between wear resistance and toughness, reducing unexpected edge breakage and interruptions. For production environments, this results in fewer tool changes and a more consistent cycle time, while the standardised form factor simplifies spare-part management across multiple lathes. Geometry and chip control that improve surface finish A trigon insert profile with a 0.8 mm corner radius and the specified SS chipbreaker promotes reliable chip formation and evacuation during turning. The 0° clearance supports accurate contact with the workpiece and helps maintain dimensional stability in both external and internal operations. These geometric choices translate into a measurable improvement in workpiece finish and lower rework rates, especially when paired with an appropriately selected holder and cutting parameters. Material grade engineered for demanding turning tasks The Tungaloy GH330 carbide composition is formulated to support a wide range of turning conditions by combining resistance to abrasive wear with the edge stability needed for interrupted cuts. This composition complements the insert’s geometry, helping to extend the interval between indexings and replacements. For manufacturers seeking predictable tool life and consistent part quality, the material-grade and design deliver an efficient compromise between longevity and performance. System compatibility and selection guidance for reliable setup ISO compatibility depends on factors such as insert shape, clearance angle, tolerance class, fastening and thickness; the trigon form and cylindrical hole of this insert enable secure clamping in suited WNMG-compatible holders. Choose the chipbreaker and grade to match the workpiece material, machining stability and desired surface quality. For guidance on holder matching and cutting data, the Metav Werkzeuge consultants provide application-focused advice to ensure correct system configuration and process reliability. Contact Metav Werkzeuge for tailored application advice and secure original Tungaloy WNMG080408-SS GH330 inserts for productive, reliable turning — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6809712 SKU: 6809712-Tungaloy Manufacturer SKU: TUN6809712 Model series: ISO-Drehwendeschneidplatten ISO designation: 080408 Facts Corner radius: 0.8 mm Plate thickness: 4.76 mm Clearance angle: 0° Included angle: 80° Size: 08 Special features Material: carbide Grade: GH330 Chipbreaker: SS Plate form: trigon Hole: with cylindrical hole Application: turning FAQ What materials is this insert suitable for machining? The WNMG080408-SS GH330 insert, in GH330 carbide, is designed as a versatile turning grade offering a balance of wear resistance and toughness suitable for a broad range of turning tasks. How is compatibility with a tool holder determined? Compatibility is determined by the insert form, clearance angle, tolerance class, fastening method, size and thickness; matching these parameters to a WNMG-compatible holder ensures secure clamping and repeatable performance. What advantage does the SS chipbreaker provide? The SS chipbreaker stabilises chip formation for turning operations, improving evacuation and contributing to consistent surface finish when combined with the trigon geometry and correct cutting parameters. Does the 0.8 mm corner radius affect part accuracy? A 0.8 mm corner radius offers a compromise between strength and detail: it increases edge robustness for stable cutting while maintaining adequate profile definition for most general turning profiles. Is this an original Tungaloy product and where can it be sourced? This article is listed as Tungaloy original stock; Metav Werkzeuge supplies the WNMG080408-SS GH330 insert and can advise on application-specific selection and availability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080408 GH330 Wendeplatten - Tungaloy
WNMG 080408 GH330 ISO-Drehwendeschneidplatte für Drehen von Tungaloy WNMG 080408 GH330 ist eine ISO-genormte Trigon-Wendeplatte für präzises Außen- und Innendrehen in der metallbearbeitung Trigonform mit zylindrischem Loch für stabile Spannungen Hartmetall mit GH330 für ausgewogene Verschleißfestigkeit Eckenradius 0,8 mm für kontrollierte Schnittführung Freiwinkel 0° für sichere Kantenlage Plattendicke 4,76 mm für hohe Wiederholgenauigkeit Hohe Prozesssicherheit durch ausgewählten Schneidstoff Die Wendeplatte WNMG080408-37 GH330 kombiniert Hartmetall mit der Schneidstoffsorte GH330, die speziell für das Drehen entwickelt wurde. Die Sorte ergänzt die Geometrie um ein ausgewogenes Verhältnis aus Verschleißfestigkeit, Zähigkeit und Schneidkantenstabilität, wodurch längere Standzeiten und konstantere Bearbeitungsergebnisse erreichbar sind. Für Anwender bedeutet das reduzierte Rüstintervalle und planbare Werkzeugkosten. Kompatibilität und einfache Integration in den Werkstattalltag Durch die ISO-Normierung ist die Platte in gängige Haltersysteme integrierbar; die Kompatibilität hängt von Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke ab. Die trigonale Plattenform und das zylindrische Loch sorgen für sichere Positionierung auf Außenhaltern oder Bohrstangen. Anwender profitieren von schneller Indexierbarkeit und minimalem Stillstand beim Schneidkantenwechsel. Geometrie, Spanformer und Einsatzempfehlung Der integrierte Spanbrecher 37 ist auf kontrollierte Spanbildung ausgelegt und erleichtert die Spanabfuhr bei Außen- und Innendrehprozessen. Der Eckenradius 0,8 mm ermöglicht eine präzise Schnittführung mit guter Oberflächenqualität, während die Plattendicke 4,76 mm Stabilität bei variierenden Schnittbedingungen bietet. Die Platte eignet sich besonders für Serien mit wechselnden Schnittparametern, bei denen konstante Ergebnissicherheit gefragt ist. Zielgruppe und wirtschaftlicher Nutzen Die Platte richtet sich an Metallzerspaner in CNC-Fertigung, Lohnfertigung und anspruchsvollen Werkstätten, die Wert auf Prozesssicherheit und Wirtschaftlichkeit legen. Durch die Kombination aus standardisierter Bauform und der Sorte GH330 lassen sich Maschinenlaufzeiten optimieren und Nacharbeit reduzieren. Die Investition amortisiert sich über geringere Werkzeugwechsel und stabilere Fertigungsprozesse. Empfehlung: Für produktive Drehanwendungen die WNMG080408-37 GH330 von Tungaloy direkt über Metav Werkzeuge anfragen – Beratung per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 6809695 Hersteller: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: WNMG080408-37 GH330 Hersteller SKU: TUN6809695 Daten Eckenradius: 0,8 mm Winkel: 80° Plattendicke: 4,76 mm Plattengröße: 08 Besonderheiten Material: Hartmetall Sorte: GH330 – ausgewogenes Verhältnis aus Verschleißfestigkeit und Zähigkeit Schneidstofftyp: Tungaloy-Schneidstoffsorte Plattenform: trigon Spanbrecher: 37 Freiwinkel: 0° Loch: mit Loch Lochstil: zylindrisches Loch ISO-Bezeichnung: WNMG080408-37 FAQ Für welche Bearbeitungen ist diese Wendeplatte am besten geeignet? Die WNMG080408-37 GH330 von Tungaloy ist für Außen- und Innendrehen konzipiert und eignet sich besonders für Anwendungen, bei denen stabile Spanbildung und Schneidkantenstabilität gefragt sind. Wie wirkt sich die Sorte GH330 auf die Standzeit aus? Die Sorte GH330 bietet eine ausgewogene Kombination aus Verschleißfestigkeit und Zähigkeit, wodurch die Standzeit im Vergleich zu weniger ausgewogenen Sorten häufig länger und die Prozesssicherheit höher ausfällt. Welche Rolle spielt der Spanbrecher 37? Der Spanbrecher 37 ist für kontrollierte Spanformung ausgelegt und verbessert die Spanabfuhr sowie die Oberflächengüte bei wechselnden Schnittbedingungen. Welche Haltereigenschaften müssen beachtet werden? Kompatibilität wird durch Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke bestimmt; die trigonale Form und das zylindrische Loch erleichtern die sichere Spannlage. Ist die Platte für feine Oberflächenbearbeitung geeignet? Ja, mit dem Eckenradius 0,8 mm und der stabilen Plattendicke 4,76 mm lässt sich eine gute Oberflächenqualität erzielen, insbesondere bei angepassten Schnittparametern. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG 080408 GT9530 Wendeplatten - Tungaloy
WNMG 080408 GT9530 WNMG080408-FW – ISO-Drehwendeschneidplatte für Drehen | Tungaloy Die WNMG080408-FW GT9530 ist eine ISO-genormte Drehwendeschneidplatte für präzise Schlicht- und leichte Universalbearbeitungen beim Drehen. Beschichtetes Cermet GT9530 für lange Standzeit Optimierter Spanformer FW für stabile Spanabfuhr Für Stahl ausgelegt, gute Oberflächengüte Trigon-Form mit zylindrischem Loch für sichere Befestigung 80° Keilwinkel für universelle Außenbearbeitung Hohe Prozesssicherheit durch beschichtetes Cermet Die beschichtete Cermet-Sorte GT9530 liefert konstante Schneidkanten und eine hohe Verschleißfestigkeit, was besonders bei stabilen Schneidbedingungen die Standzeit erhöht. Anwender profitieren von gleichbleibender Oberflächengüte und reduzierten Stillstandszeiten, da weniger Werkzeugwechsel notwendig sind. Die Kombination aus hartem Kern und tribologisch optimierter Beschichtung sorgt für niedrige Reibung und gleichmäßige Spanbildung. Einsatzbereiche und Nutzen beim Drehen Für das Außen- und Innendrehen bietet die Platte eine zuverlässige Lösung bei Schlichtoperationen und leichten Universalaufgaben in Stahl. Durch den 80° Keilwinkel entsteht eine gute Schneidkantenstabilität bei mittleren Schnittwerten, wodurch sich Prozesse wirtschaftlicher gestalten lassen. Werkstätten und Produktionslinien mit Fokus auf reproduzierbare Oberflächen profitieren von der planbaren Standzeit und der einfachen Einsetzbarkeit in ISO-genormte Halter. Kompatibilität, Einbau und Systemhinweise Die Platte ist ISO-genormt; die Passung zum Halter richtet sich nach Form, Freiwinkel, Toleranzklasse, Befestigungsart, Größe und Dicke. Die trigonförmige Platte mit zylindrischem Loch ermöglicht sichere Fixierung mittels Unterlage/Klemmsatz und Ersatzschrauben. Hinweis: FW bezeichnet den Spanformer mit Freiwinkelcharakteristik, GT9530 steht für die verschleißfeste Cermet-Beschichtung, und die ISO-Bezeichnung 080408 definiert Form, Größe und Dicke für die passende Halterauswahl. Materialeigenschaften und Bearbeitungsvorteile Gefertigt aus Hartmetall mit Cermet-Beschichtung, ist die Platte auf gute Kantenschärfe und Oberflächengüte ausgelegt. Das Materialverhalten reduziert Anbackungen bei Stahlbearbeitung und unterstützt gleichmäßige Spanabfuhr. Anwender erreichen durch den optimierten Spanformer geringere Nachbearbeitungsaufwände und stabile Toleranzergebnisse bei Serienfertigung. Für langlebige Schlichtoperationen empfehlen wir die WNMG080408-FW GT9530 von Tungaloy – Anfragen per E‑Mail an info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930. Produktmerkmale Artikelnummer: 6735876 Marke: Tungaloy Bezeichnung: WNMG080408-FW Serie: ISO-Drehwendeschneidplatten Hersteller-SKU: TUN6735876 Daten Radius: 0,8 mm Winkel: 80° Plattendicke: 4,76 mm Plattengröße: 08 Eckenradius: 0,8 mm Freiwinkel: 0° Besonderheiten Material: Hartmetall Beschichtung/Sorte: GT9530 (verschleißfeste Cermet-Beschichtung) Spanbrecher: FW (Spanformer, Freiwinkel-Charakteristik) Loch: mit Loch — zylindrisches Loch für sichere Befestigung Plattenform: trigon Anwendung: Drehen — Außen- und Innendrehen, Schlichten bis leichte Universalbearbeitung ISO-Code: 080408 — genormte Form- und Größenangabe FAQ Wie unterscheidet sich die Sorte GT9530 von anderen Cermet-Sorten? Die Sorte GT9530 bietet erhöhte Verschleißfestigkeit und ist auf Schlicht- bis leichte Universalbearbeitung ausgelegt; die WNMG080408-FW GT9530 von Tungaloy liefert dadurch bessere Oberflächenergebnisse bei stabilen Prozessbedingungen. Ist die Platte für harte Stähle geeignet? Die WNMG080408-FW GT9530 ist primär für Stahlbearbeitung konzipiert; bei hohen Härtegraden sind spezielle Sorten zu prüfen, die für vorgehärtete Werkstoffe ausgelegt sind. Welchen Vorteil bietet der Spanformer FW? Der Spanformer FW sorgt für kontrollierte Spanabfuhr und stabile Schnittbedingungen, was bei der WNMG080408-FW GT9530 zu weniger Anbackungen und konstanter Kantengüte führt. Welche Halter sind kompatibel mit dieser ISO-Platte? Kompatible Halter müssen die ISO‑Geometrie 080408 unterstützen sowie Form, Freiwinkel und passende Befestigung bieten; die Montage erfolgt mit passender Unterlage und Klemmsatz. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG 080408 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of coated cermet durability, excellent surface finish, and secure clamping features for reliable turning performance; order the WNMG080408-TQ GT9530 directly via Metav Werkzeuge or ask our consultants for application advice. WNMG080408-TQ GT9530 ISO trigon turning insert — coated cermet for finishing and light universal turning (Tungaloy) A WNMG080408-TQ GT9530 trigon indexable insert designed for precision turning of steel where superior surface quality and extended tool life are required Coated cermet grade GT9530 for long life Optimised for finishing and light universal turning Trigon WNMG with 0.8 mm corner radius Cylindrical hole for secure clamping Consistent part quality through a wear-resistant cutting grade The GT9530 is a coated cermet grade developed for finish-to-light-universal turning of steel under stable machining conditions. The combination of cermet substrate and tailored coating improves wear resistance while supporting fine chip formation, which translates into more consistent dimensional accuracy and reduced rework. The trigon geometry contributes to a stable cutting edge, while the 0.8 mm corner radius helps maintain edge strength for continuous finishing passes. This makes the insert well suited for medium- to high-volume production where surface integrity is a priority. Improved process reliability with secure clamping and ISO compatibility ISO-standard geometry ensures the insert fits holders when form, clearance, tolerance class, fastening method, size and thickness match. The cylindrical hole and standardised locating features provide secure axial and radial support, reducing vibration and indexation errors during tool changes. The 80° included angle and 0° clearance angle result in predictable cutting forces and familiar set-up behaviour on common turning toolholders. For manufacturing engineers, this predictability means fewer trial-and-error adjustments and shorter machine downtime between batches. Clear benefits for shop-floor efficiency and surface finish When finishing stainless workpieces such as shafts or medium-alloy steels, the coated cermet composition of this insert delivers superior surface finish compared with conventional grades while extending tool life in steady conditions. The plate thickness of 4.76 mm and the WNMG trigon form provide a balance between edge stability and versatility for internal and external turning operations. Choosing this grade reduces frequency of index changes and supports a smoother production flow, offering a measurable contribution to overall process efficiency. For technical consultation or to secure WNMG080408-TQ GT9530 inserts from Metav Werkzeuge, contact our team at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss holder compatibility and batch availability Technical data Article number: 6707283 SKU: 6707283-Tungaloy Manufacturer SKU: TUN6707283 Model series: ISO-Drehwendeschneidplatten Label: WNMG080408-TQ GT9530 Facts Corner radius: 0.8 mm Plate thickness: 4.76 mm Size designation: 08 ISO code: 080408 Included angle: 80° Clearance angle: 0° Special features Material: carbide (cermet grade GT9530) Geometry: trigon (WNMG) Chipbreaker: TQ Hole style: cylindrical hole (with hole) Application: turning; finishing to light universal operations on steel FAQ What materials is this insert suitable for? The GT9530 cermet grade is intended primarily for steel machining and performs well in finishing to light universal turning applications where good surface finish and longer tool life are required. How does the trigon shape affect cutting performance? The trigon (WNMG) form provides a robust cutting edge and stable seating in the holder; combined with the 0.8 mm corner radius it offers a balance between edge strength and fine surface finish for finishing passes. Is this insert compatible with standard ISO holders? Yes — the insert follows ISO dimensions (080408) and is compatible when form, clearance, tolerance class, fastening method, size and thickness correspond to the holder specifications. What is the purpose of the cylindrical hole? The cylindrical hole allows secure clamping and reliable indexation, reducing the risk of movement under cutting forces and improving repeatability during insert changes. Can this insert be used for heavy roughing operations? The GT9530 grade is optimised for finishing and light universal turning; for heavy roughing, a more robust, tougher grade would be preferable to withstand high impact and interrupted cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080408 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of ISO compatibility, a coated cermet GT9530 grade and a precise 0.8 mm corner radius for reliable finishing and extended tool life; order the WNMG080408-TS GT9530 directly via Metav Werkzeuge or contact our consultants for holder matching and process advice. WNMG080408-TS GT9530 — ISO trigon turning insert, coated cermet, for turning The WNMG080408-TS GT9530 is an ISO-standard trigon indexable insert for turning, designed as a wear-resistant cermet grade for finishing and light universal turning of steel in stable machining conditions ISO-standard trigon shape Coated cermet GT9530 for long life 0.8 mm corner radius for fine finishes Compatible with cylindrical-hole holders Engineered for precise finishing and longer tool life The insert is supplied in a coated cermet GT9530 grade that is optimised for finishing to light universal turning of steel. The selected cermet coating reduces flank wear under stable cutting conditions and supports a consistently fine surface finish; this leads to fewer rework operations and more predictable component quality. The material choice and coating combination were selected to balance surface integrity and improved tool life, especially where dimensional consistency and low cutting forces are priorities. Geometry and clamping that ensure compatibility and repeatability Manufactured to ISO dimensions, the trigon form and precise tolerances make the insert straightforward to integrate into standard toolholders. Key geometry details such as the 0.8 mm corner radius, the 0° clearance and 4.76 mm thickness influence cutting engagement and provide the mechanical support required for finishing passes. The insert’s cylindrical hole ensures secure fastening in compatible clamping systems; compatibility with a holder is determined by form, clearance angle, tolerance class, fastening method, size and thickness, so matching the holder geometry is essential for repeatable results. Application guidance and effective chip control This indexable plate is intended for external and internal turning where a fine surface and stable performance are required. The built-in chipbreaker TS is tuned for controlled chip formation during finishing cuts and aids consistent evacuation in uninterrupted operations. Select the GT9530 grade and the TS chipbreaker when machining steel under stable set-ups; if conditions vary, consider adapting the chipbreaker or holder rigidity to maintain surface quality and tool life. Proper selection reduces downtime and supports higher first-pass yields. System approach for economical, productive machining The system comprises the ISO turning insert, a matching external holder or boring bar, a clamping pad or clamping kit and replacement screws. Using a complete system with correctly matched components minimises vibration and ensures the cermet grade performs as intended. The indexable design allows quick edge changes, lowering non-productive time and keeping the machining process fluid. For best results, combine the insert with a robust holder and a suitable clamping set to exploit the stable cutting window offered by this grade. For tailored advice on integrating the Tungaloy WNMG080408-TS GT9530 into existing tool systems or for assistance with matching holders, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for expert technical support. Technical Data Article number: 6998115 SKU: 6998115-Tungaloy Manufacturer article number: 6998115 Designation: WNMG080408-TS GT9530 Manufacturer: Tungaloy Facts Corner radius: 0.8 mm Insert angle: 80° Clearance angle: 0° Thickness: 4.76 mm ISO code: 080408 Size: 08 Special features Grade/coating: GT9530 (coated cermet) Substrate: cemented carbide Chipbreaker: TS Plate form: trigon Hole: with hole, cylindrical hole Typical application: turning (external and internal) FAQ Which materials is this insert suitable for? The WNMG080408-TS GT9530 is specified for machining steel; the GT9530 cermet grade provides wear resistance and surface finish performance in stable cutting conditions. What does the TS chipbreaker do? The TS chipbreaker is designed for controlled chip formation during finishing cuts; in the WNMG080408-TS GT9530 it supports consistent chip control and reliable surface quality. How is compatibility with a holder determined? Compatibility is determined by the insert form, clearance angle, tolerance class, fastening method, size and thickness; ensure the holder accepts trigon ISO inserts with a cylindrical hole and 4.76 mm thickness. Can the insert be used for internal turning? Yes, the insert is suitable for both external and internal turning applications where the cermet grade and chipbreaker match the workpiece and process stability. What is the correct corner radius for fine finishing? A 0.8 mm corner radius offers an effective balance for fine finishing, providing edge strength while enabling a refined surface finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080408 GT9530 Wendeplatten - Tungaloy
High-performance GT9530 coated cermet provides a fine surface finish and extended tool life for stable finishing operations; the trigon WNMG geometry with a 0.8 mm corner radius and 0° relief angle delivers precise cutting performance and predictable compatibility with ISO holders. Order the WNMG080408-TSF GT9530 directly via Metav Werkzeuge or ask the consultants for tailored application support. WNMG080408-TSF GT9530 — Trigon turning insert, coated cermet, Tungaloy The WNMG080408-TSF GT9530 is an ISO-format trigon insert intended for finishing and light universal turning of steel under stable machining conditions Coated cermet grade GT9530 for fine finish Trigon shape with 0.8 mm corner radius 0° relief angle for neutral cutting geometry Chipbreaker TSF optimised for stable operations Consistent surface quality with extended tool life The GT9530 coated cermet grade combines ceramic hardness with a metallic binder to produce low flank wear and an improved workpiece appearance, making it particularly suitable for finishing passes on steel where surface integrity matters. Cermet chemistry offers a distinct balance: greater resistance to abrasion than conventional carbides and a tendency to form a stable cutting edge, which translates into longer tool life and fewer interrupted production cycles. For shops aiming to reduce rework and maintain tight surface tolerances, the coated cermet option represents a reliable investment. Precision geometry that eases holder selection Adherence to the ISO insert form ensures predictable mechanical fit and orientation when paired with standard external holders or boring bars. The trigon shape provides three usable cutting corners per index, while the 0.8 mm corner radius increases edge strength without compromising finish; the 0° relief angle yields a neutral cutting geometry suited to a wide range of turning set-ups. Compatibility is determined by insert form, relief, tolerance class, fastening method, size and thickness—this structured approach simplifies tooling selection and minimises set-up errors in production environments. Improved process stability and recommended applications Equipped with the TSF chipbreaker, this insert is designed for stable chip formation under well-supported conditions, which benefits both external and internal turning operations. Typical use cases include finishing and light universal turning of steel where a balance of surface finish and extended cutter life is required. The insert is supplied as part of a system that includes an appropriate holder or boring bar, a support shim or clamp set, and replacement screws; this system view enables predictable process results and streamlined maintenance routines, supporting consistent throughput on the shop floor. For tailored cutting data, application advice or to request supply of Tungaloy GT9530 inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss optimal holder combinations and delivery options. Technical data Article number: 6998113 Manufacturer: Tungaloy Manufacturer SKU: TUN6998113 SKU: 6998113-Tungaloy Model series: ISO-Drehwendeschneidplatten Core technical data ISO designation: 080408 Insert designation: WNMG080408-TSF Angle: 80° Corner radius: 0.8 mm Insert thickness: 4.76 mm Size: 08 Relief angle: 0° Hole style: cylindrical hole Materials & features Coating / grade: GT9530 Cutting material: coated cermet Substrate material: carbide Chipbreaker: TSF Insert form: trigon Application: Turning Typical use: external and internal finishing of steel Compatibility criteria: form, relief, tolerance class, fastening, size, thickness FAQ Which materials is this insert suitable for? The WNMG080408-TSF GT9530 is intended primarily for steel machining in finishing and light universal turning applications; the cermet grade emphasises surface finish and wear resistance. What advantages does the GT9530 cermet grade provide? GT9530 offers improved abrasion resistance and a stable cutting edge, resulting in better surface finish and longer tool life compared with standard uncoated grades when used under stable cutting conditions. How does the TSF chipbreaker affect performance? The TSF chipbreaker is optimised for stable chip formation in finishing operations, promoting consistent evacuation and reducing the risk of built-up edge in supported turning set-ups. What should be considered for holder compatibility? Compatibility depends on the insert form, 0° relief angle, tolerance class, fastening method, size (08) and thickness (4.76 mm); matching these parameters with an ISO-compatible holder ensures secure clamping and correct cutting geometry. Can this insert be used for internal turning? Yes, the geometry and chip control of this trigon insert permit internal turning when paired with a suitable boring bar and the correct holder configuration. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080408 KS20 Wendeplatten - Tungaloy
Take advantage of the combination of ISO‑compliant form, KS20 wear‑resistant grade and a precise 0.8 mm nose radius for consistent turning results; order the insert directly via Metav Werkzeuge or request application advice from our consultants. WNMG 080408 KS20 — Indexable turning insert, 80° geometry (Tungaloy) The WNMG 080408 KS20 is an ISO‑format indexable insert for turning, designed for external and internal turning tasks and interchangeable with compatible holders. ISO‑standard trigon insert for turning KS20 Tungaloy grade for wear resistance 0.8 mm nose radius for precise profiles Cylindrical hole, 0° clearance, 4.76 mm thickness Reliable cutting performance through material and grade The WNMG080408‑SA KS20 insert combines a tungsten carbide substrate with Tungaloy's KS20 grade to balance wear resistance and edge stability. This grade is formulated to maintain cutting edge integrity under interrupted cuts and continuous turning operations, which reduces the frequency of tool changes and supports steady cycle times. The result is improved process reliability and repeatable surface quality, especially where controlled flank wear is preferable to rapid edge failure. Predictable fit for fast set‑up and repeatability Adherence to the ISO‑standard geometry and the trigon form ensures the insert seats reliably in matching external holders and boring bars. Compatibility is determined by form, clearance, tolerance class, fixing method, size and thickness; the trigon shape with a cylindrical hole and 0° clearance angle simplifies alignment and clamping. The 4.76 mm plate thickness and standard dimensions enable predictable clamping forces and repeatable concentricity, reducing set‑up time and the need for adjustment between jobs. Efficient turning and improved surface finish With the chipbreaker SA geometry and a 0.8 mm nose radius, this insert supports controlled chip formation and stable contact at the tool tip, which contributes to consistent surface finish and dimensional accuracy in both external and internal turning. The insert is intended for integration into a system comprising a matching external holder or boring bar, a shim/clamping set and replacement screws; selecting the appropriate chipbreaker and grade according to workpiece material and machining stability optimises productivity and tool life. Contact Metav Werkzeuge for tailored application advice on the Tungaloy WNMG080408‑SA KS20 insert and assistance with holder matching; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6809710 Manufacturer SKU: TUN6809710 Label / SKU: 6809710-Tungaloy Data Nose radius: 0.8 mm Geometry angle: 80° Clearance angle: 0° Plate thickness: 4.76 mm Size: 08 Special features ISO‑designated indexable turning insert WNMG080408‑SA Trigon plate form Cylindrical hole Chipbreaker: SA Grade: KS20 (Tungaloy) Material: tungsten carbide Intended application: turning (external and internal) Typical system components: external holder or boring bar, shim/clamping set, replacement screws FAQ What materials is this insert suitable for? The WNMG080408‑SA KS20 is a tungsten carbide insert and the KS20 grade is designed to provide a balance of wear resistance and toughness; it is suitable where a robust, general‑purpose grade is required for turning operations. How does the 0.8 mm nose radius affect surface finish? A 0.8 mm nose radius on the insert promotes a smoother surface finish and better profile control compared with a smaller radius, while maintaining acceptable cutting forces for many turning applications. Is the insert compatible with standard WNMG holders? Yes, the ISO‑standard WNMG geometry and trigon form are made to fit matching WNMG external holders and boring bars, provided the holder accepts the corresponding size, thickness and clamping style. What is the purpose of the chipbreaker SA? The chipbreaker SA is engineered to control chip flow and support stable cutting conditions, which helps to prevent entanglement and improves surface integrity during turning. Which system parts are required to mount the insert? A complete assembly typically includes a matching external holder or boring bar, a shim or clamping set and the appropriate replacement screws to secure the insert. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
WNMG 080408 NS520 TS Wendeplatten - Tungaloy
Take advantage of the NS520 cermet grade and the TS chipbreaker for consistently high surface quality and predictable wear behaviour; combine these properties with the standardised WNMG geometry for efficient finishing operations. Order the insert directly via Metav Werkzeuge or contact the consultants for integration support. WNMG 080408 NS520 — WNMG080408-TS trigon turning insert (Cermet) by Tungaloy The WNMG080408-TS NS520 is an ISO-standard trigon turning insert designed for finish to light machining of steel in external and internal turning applications ISO WNMG trigon for precision turning NS520 cermet grade for superior finish 0° rake angle for consistent cutting Corner radius 0.8 mm for fine detail Delivering repeatable surface quality and dimensional control The WNMG080408-TS NS520 is designed to support finish turning where surface integrity and tolerance adherence are decisive. The combination of a cermet NS520 substrate and a finely tuned TS chipbreaker reduces built-up edge and promotes even wear, which in turn maintains component geometry over longer tool life. For machines with stable setups, the insert helps to achieve consistent Ra values while keeping rework rates low. The standardised geometry supports predictable insert seating and repeatable indexation in approved toolholders. Compatibility and clamping: check form, angle and tolerance Compatibility depends on insert form, relief angle, 0° rake angle and tolerance class; the trigon format requires matching trigon holders or appropriate boring bars. The WNMG format and the trigon plate form mean that correct clamping and support under the insert pocket are essential for vibration damping and edge life. The presence of a cylindrical hole eases positive locating in compatible clamping systems. Operators should verify holder radius, screw length and seat condition to ensure full contact and reliable performance. Material behaviour and cutting performance of NS520 cermet The NS520 grade is a cermet optimised for finishing steels, offering a balance between hardness for wear resistance and toughness for edge stability. Compared with conventional cemented carbide, this grade provides improved surface finish and steadier dimensional behaviour at lower to moderate cutting speeds. The TS chipbreaker is engineered to produce short, controllable chips in finishing passes, reducing the risk of surface damage and improving process cleanliness. For light roughing follow-up with small depth of cut, this insert maintains edge sharpness and delivers predictable flank wear patterns. Practical recommendations for process integration Select the TS chipbreaker and corner radius 0.8 mm when the priority is fine detail and tight tolerances; smaller radii reduce cutting forces and improve local finish but require rigid setups. Ensure the toolholder supports the insert across its seating plane and that the fastening torque matches holder specification. When integrating into a production cell, document the insert orientation, clamping parts and index sequence to preserve interchangeability. For atypical materials or unstable setups, choose a different grade or increase clamping rigidity to maintain the intended performance. For process advice or to arrange sample testing of the Tungaloy WNMG080408-TS NS520, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6809734 Manufacturer SKU: TUN6809734 SKU: 6809734-Tungaloy WNMG designation: WNMG080408-TS NS520 Manufacturer: Tungaloy Facts Corner radius: 0.8 mm Plate thickness: 4.76 mm Size: 08 WPL ISO code: 080408 Relief / rake angle: 0° Insert angle: 80° Hole style: cylindrical hole Special features Material: carbide base Grade: NS520 (cermet / coated cermet) Chipbreaker type: TS Plate form: trigon Series: ISO turning inserts Application: finish to light machining of steel Compatibility criteria: form, relief angle, tolerance class, fastening, size, thickness FAQ What materials is this insert best suited for? The WNMG080408-TS NS520 is intended primarily for finishing and light machining of steel, where the NS520 cermet grade improves surface quality and dimensional stability. How does the TS chipbreaker affect machining? The TS chipbreaker on the WNMG080408-TS NS520 produces controllable, short chips in finishing passes, which helps protect the machined surface and maintain steady cutting forces. Which holders are compatible with this trigon insert? Compatibility requires holders designed for WNMG trigon inserts; ensure the holder matches the trigon seat, accommodates the cylindrical hole and provides adequate support for the 4.76 mm plate thickness. Is the NS520 grade suitable for high-speed cutting? The NS520 cermet is optimised for finish to light machining; while it offers excellent surface finish and wear characteristics, process parameters should be validated for specific machine power and setup stability before high-speed application. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080408 NS520 Wendeplatten - Tungaloy
The WNMG080408 NS520 delivers precise finishing performance through its cermet grade and compact trigon geometry; combined with a 0.8 mm nose radius and double-sided chipbreaker, it supports consistent surface quality and predictable tool life. Order the WNMG080408 NS520 directly via Metav Werkzeuge or ask our consultants if needed. WNMG 080408 NS520 – Turning insert (trigon) for finishing to light machining, Tungaloy The WNMG080408 NS520 is an indexable turning insert designed for finishing to light machining of steel, offering a trigon form with an 80° cutting angle and a 0.8 mm nose radius for improved surface integrity. Cermet grade NS520 for fine finishing Trigon WNMG shape, 80° geometry 0.8 mm nose radius for improved surface finish Double-sided chipbreaker, cylindrical hole Improve throughput with a stable cermet grade and consistent wear The combination of NS520 and a cermet cutting concept focuses on long-term surface finish stability and uniform wear, which supports predictable change intervals and reduced rework. As a finishing-oriented grade, the insert promotes fine surface integrity and dimensional control on light turning operations. The chemistry and microstructure of cermet grades favour abrasion resistance over heavy interrupted cuts, making this grade particularly suitable where consistent part quality and low-rate tool consumption are priorities. Achieve superior surface finish and dimensional accuracy A 0.8 mm nose radius together with the trigon form and an 80° cutting geometry reduces cutting vibrations and helps distribute forces across the insert edge, resulting in improved dimensional repeatability and a finer finish. The relatively small nose radius permits tight profile control while still delivering improved aesthetics on turned parts. For customers seeking both form accuracy and a high-quality surface, the geometry balances contact conditions and edge strength during finishing cuts. Clear guidance on compatibility and secure clamping for reliable results Belonging to the ISO series of indexable inserts, the trigon WNMG shape is compatible with holders that match the form, relief angle (0°), tolerance class, fastening type, size and thickness. The insert is supplied with a cylindrical hole for location and fastening and has a plate thickness of 4.76 mm, so selection of the correct external holder or boring bar is essential for stable clamping and repeatable positioning. Ensuring holder compatibility avoids runout and secures repeatable tool life in production environments. Recommended applications and chip control for predictable performance This insert is optimised for finishing to light machining of steel and is supplied with a double-sided chipbreaker, allowing two usable cutting edges per indexable face and straightforward indexing in case of edge wear. The available option of a coated cermet further enhances edge life and reduces built-up edge tendencies on certain alloys. In practice, the combination of chip control, grade choice and stable seating leads to steady process parameters and reduced downtime for edge changes. For application advice or to order the WNMG080408 NS520, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6809665 Manufacturer SKU: TUN6809665 SKU: 6809665-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Nose radius: 0.8 mm Plate thickness: 4.76 mm Geometry angle: 80° Relief angle: 0° Size: 08 ISO designation: 080408 Special features Cutting material: Cermet (coated cermet option) Plate shape: trigon (WNMG) Chipbreaker: double-sided Hole: with cylindrical hole Application: Turning, finishing to light machining of steel FAQ What materials is this insert suitable for? The WNMG080408 NS520 is optimised for finishing to light machining of steel and performs best where surface finish and dimensional accuracy are priorities. How does the 0.8 mm nose radius affect results? A 0.8 mm nose radius improves edge contact distribution and reduces vibration, which leads to finer surface finish and more consistent part dimensions when using the insert in finishing operations. Is the insert indexable on both sides? Yes, the double-sided chipbreaker design provides multiple usable edges; the WNMG080408 NS520 permits indexing to extend effective cutting life. Which holder characteristics are required for correct mounting? Compatibility depends on matching the trigon form, relief angle (0°), tolerance class, fastening type, size and thickness; holders or boring bars designed for ISO WNMG080408 inserts with a cylindrical locating hole are recommended. What is the manufacturer article number and SKU? Manufacturer article number 6809665, manufacturer SKU TUN6809665 and SKU 6809665-Tungaloy identify this Tungaloy turning insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com