WNMG 080408 T6215 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide T6215 and the optimised TSF chipbreaker for reliable performance in turning rostfreier Stahl; pairing robustness with precise geometry ensures consistent component quality. Order the WNMG080408-TSF T6215 directly via Metav Werkzeuge or consult our specialists for tailored recommendations. WNMG080408-TSF T6215 (WNMG 080408 T6215) – ISO turning insert for rostfreier Stahl, 80° trigon by Tungaloy A WNMG080408-TSF T6215 insert engineered for turning operations on rostfreier Stahl under stable to slightly interrupted cutting conditions, offering CVD-coated hardness and an 80° trigon geometry for versatile external and internal machining. CVD-coated carbide T6215, wear-resistant Optimised TSF chipbreaker for stable cuts 80° trigon shape with 0.8 mm corner radius Cylindrical hole for secure clamp mounting Improved wear resistance and chip control for consistent parts The CVD-coated T6215 grade combines a hard, wear-resistant surface layer with a tough substrate of carbide, designed specifically for machining rostfreier Stahl. The coating reduces flank and crater wear, extending tool life under continuous and lightly interrupted cuts. The TSF chipbreaker promotes reliable chip formation and evacuation, which reduces the risk of built-up edge and improves surface finish. For operations where repeatability and low tool-change frequency matter, this combination translates directly into longer production runs and fewer setup interruptions. Geometry that stabilises the machining process The trigon plate with an 80° included angle and a 0.8 mm corner radius balances edge strength and accessibility. The relatively large included angle increases radial support, helping to absorb cutting forces and resist edge chipping when machining rostfreier Stahl. A 0° clearance angle as specified maintains a consistent contact pattern with the workpiece and is suited to ISO-standard holder geometries. These geometric choices result in predictable cutting behaviour, making process parameters easier to set and maintain for both external and internal turning tasks. System compatibility and practical mounting guidance ISO-standardised inserts require the correct combination of holder form, clearance angle, tolerance class, fastening method, size and thickness to ensure repeatable performance. This trigon insert features a cylindrical hole for central clamping; pairing it with a compatible external holder, appropriate shim or clamping kit, and correct replacement screws completes a robust system. Select the chipbreaker and grade according to the workpiece condition and machine rigidity: the TSF breaker and T6215 grade are aimed at stable to slightly interrupted cuts in rostfreier Stahl. For unusual geometries or intermittent cuts, consider a holder with higher rigidity or a grade optimised for tougher interruptions. Practical benefits for workshop productivity Using a CVD-coated carbide insert in a standardised system reduces process variability and increases uptime. The wear resistance of T6215 and the TSF chip control lead to more consistent surface quality and longer edge life, which together lower tooling consumption and shorten non-productive time for insert changes. For production environments seeking stable, repeatable turning of rostfreier Stahl components, this solution supports higher machine availability and more predictable quality metrics. Contact Metav Werkzeuge for application-specific advice on Tungaloy T6215 inserts, request tailored cutting-parameter guidance or sample recommendations via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 6945018 Manufacturer SKU: TUN6945018 Model series: ISO turning inserts Facts Insert designation: WNMG080408-TSF ISO code: 080408 Included angle: 80° Corner radius: 0.8 mm Plate thickness: 4.76 mm Relief angle: 0° Hole style: cylindrical (with hole) Material: carbide Special features CVD-coated Hartmetall grade T6215 TSF chipbreaker Trigon plate form Suitable for external and internal turning Compatibility requires matching holder form and tolerance class FAQ What materials is this insert suited for? This insert is optimised for turning rostfreier Stahl; the T6215 grade and TSF chipbreaker are selected specifically for wear resistance and chip control in rostfreier Stahl machining. How does the TSF chipbreaker affect performance? The TSF chipbreaker provides predictable chip formation and evacuation, reducing built‑up edge and improving surface finish when using the WNMG080408-TSF T6215 in stable turning operations. Which holder features are required for correct mounting? The insert requires an ISO-compatible holder with matching seat form, tolerance class and secure clamping for the cylindrical hole; a proper shim or clamping set and replacement screws complete the system. Can this insert be used for interrupted cuts? The T6215 grade is intended for stable to slightly interrupted conditions; for heavy interruptions, consider a more robust support system or a grade specifically rated for interrupted cutting. Is the geometry suitable for both external and internal turning? Yes, the 80° trigon shape and 0.8 mm radius offer a balance of edge strength and accessibility suitable for many external and internal turning tasks with appropriate holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080408 T6215 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide and the SA chipbreaker to maintain steady productivity when turning stainless steel; the combination of consistent tool life and reliable chip control supports uninterrupted machining. Order directly via Metav Werkzeuge or consult the technical team for grade and holder matching. WNMG 080408 T6215 — WNMG080408-SA turning indexable insert for turning, CVD-coated carbide, Tungaloy A WNMG080408-SA T6215 indexable insert designed for turning applications, focusing on stainless-steel machining under stable to slightly interrupted cutting conditions and suitable for ISO-compatible holder systems CVD-coated carbide for high wear resistance Optimised chipbreaking with SA chipbreaker ISO WNMG080408 trigon insert, 0.8 mm radius Suitable for stainless-steel turning under stable cuts Consistent performance for stainless-steel turning The CVD-coated grade T6215 provides a wear-resistant surface that prolongs edge life during extended runs on stainless steel, helping to reduce tool change frequency and machine downtime. As an indexable insert, the component delivers repeatable cutting edges and predictable wear patterns; this supports process stabilisation and easier cost accounting per part. For production environments where sustained surface quality and tool longevity matter, the coated carbide substrate offers a balance between toughness and wear resistance that suits semi-continuous turning. Geometry and chip control that improve productivity The trigon form and the SA chipbreaker combine with a 0.8 mm radius to support controlled chip formation and consistent surface finish on external and internal turning operations. The moderately rounded corner helps distribute cutting forces to reduce edge chipping in stable operating conditions, while the chipbreaking geometry channels swarf away from the cutting zone to reduce re-cutting. Selecting this geometry helps to maintain feed rates and reduce interruptions for chip clearing, translating into measurable cycle-time gains on repeat workpieces. System compatibility and practical setup guidance These ISO-standard inserts fit into conventional WNMG holders and are secured via the central bore and clamping system; the cylindrical hole design facilitates reliable seating and repeatable indexation. The plate thickness of 4.76 mm and the 0° clearance are typical for ISO WNMG dimensions, ensuring compatibility across standard external holders and boring bars. When building the toolpack, pair the insert with a holder matched for form, clearance angle and tolerance class to achieve the expected cutting performance. For turning with slight interruptions, choose the SA chipbreaker and the T6215 grade to exploit the combination of chip control and wear resistance. Discuss suitability and holder matching with Metav Werkzeuge for the Tungaloy T6215 inserts — contact info@metav-werkzeuge.com or call +49 2822 7131930 for a technical consultation and rapid delivery options Technical Data Manufacturer article number: 6876195 SKU: 6876195-Tungaloy Manufacturer SKU: TUN6876195 Label: WNMG080408-SA T6215 Core Data Corner radius: 0.8 mm Insert size: 08 Thickness: 4.76 mm Lead angle: 80° Clearance angle: 0° Special features Shape: trigon Chipbreaker: SA Coating/grade: T6215 (CVD-coated carbide) Hole style: cylindrical hole Typical application: turning Material: carbide FAQ What materials is this insert best suited to machine? This insert is designed primarily for stainless-steel turning; the T6215 grade offers wear resistance suited to stable to slightly interrupted cuts in stainless steels. How does the SA chipbreaker affect machining? The SA chipbreaker promotes short, controlled chips and assists stable chip evacuation, which helps maintain consistent surface finish and reduces downtime for chip clearing when using the WNMG080408-SA insert. Is the insert compatible with standard WNMG holders? Yes, the ISO WNMG080408 profile and the central cylindrical hole make the insert compatible with conventional WNMG external holders and clamping systems when matched by tolerance class and clearance. What benefits does the CVD-coated T6215 grade provide? The CVD-coated carbide grade T6215 balances wear resistance and toughness for improved edge life on stainless steel, extending intervals between inspections and replacements. Which corner radius is recommended for general finishing and semi-roughing? The 0.8 mm radius is a versatile compromise that supports acceptable surface finish in finishing passes while providing sufficient strength for light semi-roughing on stable setups. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080408 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide durability, precise geometry and reliable chip control to maintain stable turning processes. The design supports consistent clamping and easy integration into ISO tooling systems, helping to reduce tool change frequency and downtime. Order the insert directly via Metav Werkzeuge or contact our consultants for application advice. WNMG 080408 T6215 WNMG080408-PM — Turning ISO trigon insert for stainless applications by Tungaloy WNMG080408-PM T6215 is an ISO trigon turning insert designed for external and internal turning in industrial machining; compatible with standard ISO holders and intended for stable to slightly interrupted cuts. CVD-coated carbide grade T6215 Optimised for turning rostfreier Stahl Trigon plate, 0° relief angle Cylindrical hole for secure clamping Long-lasting wear resistance for stable production The CVD-coated carbide grade T6215 offers consistent wear resistance, translating into longer tool life during serial turning operations. This wear behaviour is particularly beneficial when machining rostfreier Stahl, where work-hardening and built-up edge can shorten tool life; the coating stabilises the cutting edge and maintains geometry over extended cycles. By choosing an insert with stable flank wear progression, process planners can expect fewer unexpected tool changes and improved production throughput. Precise geometry for reliable clamping and repeatability The trigon plate geometry with a 0° relief angle and a 0.8 mm corner radius ensures repeatable cutting engagement and accurate seat contact in matching ISO holders. The cylindrical hole design provides secure fastening and alignment, reducing vibration and runout risks that compromise surface finish. For manufacturing environments requiring predictable tolerances, the defined form and tolerance class of this ISO insert help to maintain part quality batch after batch. Improved chip control for stainless turning operations Equipped with the PM chipbreaker, the insert promotes controlled chip formation under stable to slightly interrupted cutting conditions. Effective chip control reduces entanglement, facilitates automated material handling and lowers the likelihood of rework. Since the chipbreaker is matched to the cutting grade and application, operators benefit from improved thermal management at the cutting edge and a more consistent surface integrity on turned components. Compatibility and system benefits for shop-floor integration As an ISO-standard turning insert, the plate fits into a common system: insert, compatible external holder or boring bar, clamping set and replacement screws. The standardised geometry (size 08, thickness 4.76 mm) simplifies tooling logistics and reduces the need for multiple special holders. When specified on setup sheets, this ISO insert supports quick tool changes and standardised machining protocols, which assists production engineers in maintaining lean tooling inventories and efficient tool-change procedures. Contact Metav Werkzeuge for tailored cutting data and order support for the Tungaloy WNMG080408-PM T6215 insert via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6945172 Manufacturer SKU: TUN6945172 Internal SKU: 6945172-Tungaloy Designation: WNMG080408-PM T6215 Core specifications Size: 08 Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 0° Wedge/ISO code: 080408 Insert form: Trigon (WNMG) Included hole: With cylindrical hole Materials & features Carbide substrate with CVD coating (grade T6215) Chipbreaker style: PM Application: Turning (external and internal) Suitable workpiece material: rostfreier Stahl Typical use: Stable to slightly interrupted cuts FAQ What materials is this insert suited for? The WNMG080408-PM T6215 insert is specified for machining rostfreier Stahl and performs well under stable to slightly interrupted turning conditions. Which holder types are compatible with this ISO insert? Compatibility is determined by the ISO form, relief angle, tolerance class, fastening method, size and thickness; the insert fits standard ISO trigon holders and matching boring bars when those parameters align. How does the T6215 grade improve tool life? The CVD-coated T6215 grade provides enhanced wear resistance and a stable cutting edge, which extends tool life and supports consistent cycle times when turning rostfreier Stahl. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080408 T6215 Wendeplatten - Tungaloy
Combining the CVD‑coated carbide grade T6215 with an SM chipbreaker and trigon geometry provides dependable wear resistance and controlled chips for turning stainless steels; this supports consistent component quality and longer tool life. Order the WNMG080408‑SM T6215 directly via Metav Werkzeuge or contact the consultants for grade selection and holder compatibility. WNMG080408‑SM T6215 — ISO turning insert for stainless‑steel machining by Tungaloy The WNMG080408‑SM T6215 is an ISO‑format trigon insert engineered for stable external and internal turning of stainless steels under steady to lightly interrupted conditions, offering a wear‑resistant CVD coating and an SM chipbreaker for predictable performance. CVD‑coated carbide for wear resistance SM chipbreaker for consistent chip control Trigon geometry with 0.8 mm corner radius Cylindrical‑hole insert for secure clamping Durable cutting performance for stainless‑steel turning The combination of a CVD‑coated carbide substrate and the T6215 grade is designed to resist adhesive and abrasive wear commonly encountered when machining stainless steels. This composition promotes longer tool life under steady cutting conditions and reduces unplanned tool changes. The coating improves thermal and chemical resistance at the cutting edge, so material transfer and premature flank wear are minimised; the net effect is a more reliable process and fewer interruptions in the production flow. Predictable chip control and improved surface quality The SM chipbreaker geometry is optimised to generate short, manageable chips during steady to lightly interrupted turning operations. Controlled chip morphology reduces the risk of surface damage and tool nose wear, which directly benefits component finish and reduces secondary operations. Reliable chip evacuation also contributes to safer working conditions and more stable cycle times, supporting higher overall productivity on bar and chucking operations. Rapid integration and secure clamping for consistent set‑ups Designed to ISO dimensions, the insert fits established holder systems when matched for form, relief angle, tolerance class, fixation, size and thickness. The cylindrical hole and trigon profile enable secure mechanical clamping and repeatable positioning, shortening set‑up times and reducing indexing errors. Key dimensional data such as the 0.8 mm corner radius, 4.76 mm plate thickness and size 08 format help maintenance of cutting geometry across tool life, supporting repeatable part accuracy. Practical selection of grade and geometry for productivity Selecting the correct chipbreaker and grade for the workpiece and machining stability is decisive for process efficiency. The trigon shape and 0.8 mm radius produce a robust cutting edge suitable for semi‑finishing and general turning tasks; for heavier interruptions or differing materials, alternative radius and chipbreaker combinations can be considered. Where surface finish or tolerance is critical, optimise feed and depth of cut together with the SM chipbreaker to balance tool life against part quality. For application advice or to secure supply of the Tungaloy WNMG080408‑SM T6215, contact Metav Werkzeuge for an individual consultation — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 6876193‑Tungaloy Manufacturer SKU: TUN6876193 Manufacturer article number: 6876193 Label: WNMG080408‑SM T6215 Model series: ISO turning indexable inserts Facts ISO code: 080408 Insert size: 08 Included angle: 80° Corner radius: 0.8 mm Relief angle: 0° Plate thickness: 4.76 mm Special features Material: carbide, CVD‑coated, grade T6215 Chipbreaker: SM Geometry: trigon Hole style: cylindrical hole Application: turning (external and internal) Compatibility notes: fit determined by form, relief angle, tolerance, fixation, size and thickness FAQ What materials is this insert best suited for? The WNMG080408‑SM T6215 is optimised for machining stainless steels; the CVD‑coated carbide grade T6215 provides enhanced wear resistance under stable to lightly interrupted conditions. Which holder types are compatible with this ISO insert? Compatibility depends on holder form and dimensions; the ISO format of the WNMG080408‑SM T6215 allows use with standard ISO turning holders that accept trigon inserts with a cylindrical hole and the listed thickness and size. How does the SM chipbreaker affect machining? The SM chipbreaker produces short, controllable chips and supports consistent surface finish, reducing the likelihood of chip entanglement and promoting steady cycle times on turning operations. What are the key dimensions to check before ordering? Important dimensions include the ISO code 080408, insert size 08, 0.8 mm corner radius, 4.76 mm thickness and the 80° included angle; SKU for ordering is 6876193‑Tungaloy. Can this insert be used for interrupted cuts? This grade and geometry are suitable for stable to lightly interrupted cuts; for heavy interruptions, consider a variant with a different edge preparation or a larger radius to improve edge strength. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
WNMG 080408 T6215 Wendeplatten - Tungaloy
Benefit from the wear-resistant CVD-coated carbide T6215, the trigon geometry and the precise corner radius 0.8 mm for consistent turning performance; order the insert directly via Metav Werkzeuge or request advice from our consultants. WNMG080408-TS T6215 (WNMG 080408) – ISO turning insert, trigon, 0.8 mm, Tungaloy The WNMG080408-TS T6215 is an ISO-standard indexable turning insert optimised for turning rostfreier Stahl in stable to lightly interrupted cutting conditions CVD-coated carbide grade T6215 Trigon geometry with 0.8 mm corner radius Zero-degree clearance for consistent contact Cylindrical-hole design for secure clamping Extended tool life through coating and grade The combination of a CVD-coated carbide surface and the T6215 grade delivers high wear resistance and thermal stability during turning operations. The coating reduces flank and crater wear, which extends the interval between index changes and supports reproducible component quality. For machining rostfreier Stahl, this composition helps combat built-up edge formation and maintains dimensional stability when cutting under stable to slightly interrupted conditions. The result is a lower scrap rate and more predictable tool costs per part. Reliable chip control and secure clamping The TS chipbreaker integrated into the geometry promotes controlled chip formation and evacuation, reducing the risk of chip entanglement and tool interference. The trigon geometry concentrates cutting forces near the secured seat, while the cylindrical hole and fastening interface ensure repeatable clamping accuracy. Together these aspects support consistent surface finish and protect the cutting edge in demanding turning cycles, making the insert suitable for both external and internal turning when the machining setup meets stability requirements. Practical compatibility and selection guidance As an ISO indexable insert, compatibility with the toolholder is determined by form, relief angle, tolerance class, fastening method, size and thickness. The 0° relief angle and plate thickness of 4.76 mm suit holders designed for WNMG 08 inserts; the corner radius 0.8 mm offers a balance between edge strength and fineness of finish. Select the chipbreaker and grade to match workpiece material and process stability. For applications that alternate between steady cuts and light interruptions, the combination of T6215 and the TS breaker presents a reliable starting point for process optimisation. Contact Metav Werkzeuge for tailored advice on holder compatibility, stock availability and the best setup for machining rostfreier Stahl with Tungaloy T6215 inserts — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6945053 Manufacturer SKU: TUN6945053 SKU: 6945053-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: WNMG080408-TS T6215 Core specifications Corner radius: 0.8 mm Included angle: 80° Relief angle: 0° Plate thickness: 4.76 mm Plate size: 08 Shape: trigon Hole: cylindrical hole Materials & features Material: cemented carbide Coating / grade: CVD-coated, T6215 Chipbreaker: TS Application: turning (external and internal) Suitability: rostfreier Stahl, stable to lightly interrupted cuts System: ISO turning insert compatible with appropriate holders FAQ Is this insert suitable for machining rostfreier Stahl? Yes. The WNMG080408-TS T6215 is designed for machining rostfreier Stahl under stable to lightly interrupted cutting conditions and benefits from the CVD-coated T6215 grade for reduced wear. Which holders are compatible with this WNMG insert? Compatibility depends on holder form, relief angle, tolerance class, fastening method, size and thickness; a holder that accepts WNMG 08 inserts with a 4.76 mm plate thickness and 0° relief is appropriate. What are the main advantages of the T6215 grade and CVD coating? The CVD-coated T6215 grade provides improved wear resistance and thermal stability, which helps maintain cutting-edge life and consistent surface finish when turning rostfreier Stahl. Can the insert be used for internal turning? Yes. The insert is suitable for both external and internal turning operations provided the tooling arrangement and process stability are adequate; use the same chipbreaker and holder criteria as for external turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080408 T6215 Wendeplatten - Tungaloy
WNMG 080408 T6215 – Wendeplatte für Drehen | Tungaloy WNMG 080408 T6215 eignet sich für das präzise Außen- und Innendrehen auf ISO-genormten Haltern und bietet eine verschleißarme Lösung beim Bearbeiten von rostfreiem Stahl CVD-beschichtetes Hartmetall T6215 für lange Standzeit Optimierter Spanformer SF für stabile Spanbildung ISO-genormte Wendeplatte, hohe Kompatibilität Trigon-Form mit zylindrischem Loch für sichere Befestigung Hohe Standzeit durch robuste Werkstoffkombination Die Wendeplatte basiert auf Hartmetall mit CVD-Beschichtung der Sorte T6215, was eine deutlich erhöhte Standzeit bei der Bearbeitung von rostfreiem Stahl sicherstellt. Durch die Kombination aus gehärtetem Substrat und mehrlagiger Beschichtung reduziert sich der Verschleiß an Schneidkante und Flanke. Anwender profitieren von längerem Einsatzintervall und weniger Stillstandzeit in der Produktion. Prozesssichere Spanbildung und zuverlässige Ergebniskontrolle Bei stabilen bis leicht unterbrochenen Bedingungen sorgt der Spanformer SF für kontrollierte Spanabfuhr und konstante Oberflächengüten. Die trigonale Plattenform in Verbindung mit dem Eckenradius 0,8 mm ermöglicht reproduzierbare Schnittergebnisse und gute Kontrolle bei wechselnden Schnittbedingungen. Dies macht die Platte geeignet für Fertigungsumgebungen, die Wert auf Wiederholgenauigkeit legen. Kompatibilität, Handhabung und Einsatzempfehlung Die WNMG080408-SF ist ISO-genormt und passt zu gängigen Außenhaltern, sofern Form, Freiwinkel und Toleranzklasse übereinstimmen. Die Platte verfügt über ein zylindrisches Loch zur sicheren Schraubbefestigung und eine Plattendicke von 4,76 mm, was stabile Montage und zuverlässige Sitzlage gewährleistet. Für optimale Ergebnisse empfiehlt sich die Auswahl eines Halters mit passender Toleranzklasse und die Abstimmung von Schnittdaten auf rostfreien Stahl. Empfehlung: Die WNMG080408-SF T6215 von Tungaloy bietet eine wirtschaftliche und prozesssichere Lösung für das Drehen von rostfreiem Stahl; bei technischen Fragen stehen wir unter info@metav-werkzeuge.com oder +49 2822 7131930 zur Verfügung Produktmerkmale Artikelnummer: 6876187 Hersteller: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: WNMG080408-SF Fakten Eckenradius: 0,8 mm Winkel: 80° Plattendicke: 4,76 mm Plattengröße: 08 Frei winkel: 0° Besonderheiten Material: Hartmetall Schneidstofftyp: CVD-beschichtetes Hartmetall Sorte: T6215 (verschleißfeste Sorte für rostfreien Stahl) Spanbrecher: SF (optimierter Spanformer für stabile Spanbildung) Plattenform: trigon Lochstil: zylindrisches Loch Einsatzgebiet: Drehen Kompatibilität: ISO-genormt FAQ Welche Materialien kann die WNMG080408-SF T6215 bearbeiten? Die WNMG080408-SF T6215 von Tungaloy ist speziell für das Drehen von rostfreiem Stahl ausgelegt und zeigt unter stabilen bis leicht unterbrochenen Bedingungen gute Verschleißfestigkeit und Prozessstabilität. Welche Vorteile bietet die CVD-Beschichtung der Sorte T6215? Die CVD-Beschichtung bei der Sorte T6215 erhöht die Verschleißfestigkeit der Schneidkante, sorgt für konstante Standzeiten und verbessert die Wärmebeständigkeit beim spanenden Drehen mit der WNMG080408-SF T6215. Wie wichtig ist die Wahl des Spanformers SF? Der Spanformer SF unterstützt eine kontrollierte Spanabfuhr und stabilisiert die Spanbildung; in Verbindung mit der WNMG080408-SF T6215 trägt dies zu gleichmäßiger Oberflächengüte und reduzierten Werkzeugwechseln bei. Welche Halter passen zur WNMG080408-SF? Passende Halter müssen ISO-kompatibel sein und in Form, Freiwinkel sowie Toleranzklasse zur WNMG080408-SF passen; die sichere Befestigung erfolgt über das zylindrische Loch und passende Schraubverbindungen. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG 080408 T6215 Wendeplatten - Tungaloy
The combination of CVD-coated carbide grade T6215, ISO WNMG geometry and a 0.8 mm corner radius delivers durable performance and consistent surface finish in turning operations of stainless steels; order the insert directly via Metav Werkzeuge or consult the technical advisers for application-specific guidance. WNMG080408 T6215 — WNMG indexable turning insert, CVD-coated carbide, for turning — Tungaloy A WNMG080408-TM T6215 indexable insert designed for external and internal turning, optimised for stainless steels under stable to lightly interrupted conditions and compatible with standard ISO WNMG toolholders WNMG geometry, ISO-compliant insert CVD-coated carbide T6215 for wear resistance 0.8 mm corner radius for accurate profiles Cylindrical hole for secure clamping Durable cutting performance for stainless steels The CVD-coated T6215 grade provides a wear-resistant cutting edge that extends tool life when machining stainless steels. The coating system combines a tough substrate with a protective surface layer, which reduces abrasive wear and improves resistance to heat-induced edge softening. This results in more consistent tool life in both continuous and light interruption turning, contributing to predictable production cycles and reduced tool changes. The CVD-coated carbide formulation is explained for clarity: chemical vapour deposition applies hard layers that preserve edge geometry while maintaining substrate toughness. Accurate geometry and reliable clamping for repeatable results The insert's WNMG geometry and trigon profile ensure secure seating and repeatable positioning in compatible holders. With a 0.8 mm corner radius and 4.76 mm thickness, the design balances profile accuracy with sufficient edge strength for medium-duty turning. The cylindrical hole provides positive fastening and alignment, minimising micro-movements that can degrade surface finish. Compatibility with toolholders is determined by shape, relief angle, tolerance class, fastening method, size and thickness, which simplifies selection within an ISO-standard tooling system. Practical system integration and application guidance As part of the ISO turning insert family, the component fits into a system comprising an external holder or boring bar, a shim or clamp set and replacement screws, enabling rapid changeovers. The 0° relief angle suits many common turning set-ups where a neutral clearance is required, while the TM chipbreaker supports controllable chip formation for improved surface quality and machine uptime. For operations where machinability varies, choosing the correct chipbreaker and coating combination helps to maintain process stability and surface integrity. The insert is particularly recommended where consistent repeatability and predictable wear behaviour are priorities in serial production. Contact Metav Werkzeuge for availability, tailored grade selection and application advice regarding the Tungaloy WNMG080408-TM T6215 insert, and arrange a tooling recommendation for specific stainless steel turning tasks Technical data Article number: 6903064 Core technical data Corner radius: 0.8 mm Relief angle: 0° Thickness: 4.76 mm Included angle: 80° Size: 08 Designs & special features ISO WNMG geometry, trigon shape CVD-coated carbide, grade T6215 Chipbreaker: TM Cylindrical centre hole (with hole) Suitable for external and internal turning Compatible with ISO-standard holders and clamp sets Material: cemented carbide (Hartmetall) FAQ What materials is this insert best suited for? The WNMG080408-TM T6215 insert is optimised for turning stainless steels, offering enhanced wear resistance under stable to lightly interrupted conditions. Which chipbreaker does this insert use and why is it important? This insert features the TM chipbreaker, which promotes controlled chip formation and improved surface finish during turning with the T6215 coating. How is the insert secured in the holder? The trigon-shaped insert has a cylindrical central hole and is designed for positive clamping in ISO WNMG-compatible holders, ensuring repeatable seating and reliable performance. Can this insert be used for internal as well as external turning? Yes, the ISO format and geometry of the WNMG080408-TM T6215 make it suitable for both external and internal turning applications when paired with the appropriate boring bar or holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080408 T6215 Wendeplatten - Tungaloy
WNMG 080408 T6215 Drehwendeschneidplatte für Drehen — Tungaloy Die WNMG080408-PS T6215 ist eine ISO-genormte Drehwendeschneidplatte, entwickelt für präzises Außen- und Innendrehen von rostfreiem Stahl unter stabilen bis leicht unterbrochenen Bedingungen. Hohe Verschleißfestigkeit durch CVD-Beschichtung Präziser Eckenradius 0,8 mm für Maßtreue Trigon-Form für stabile Auflage im Halter Mit zylindrischem Loch für sichere Befestigung Optimiert für rostfreien Stahl und stabile Schnitte Materialqualität für langlebige Zerspanung und konstante Standzeit Die CVD-beschichtete Hartmetalllegierung sorgt für hohe Abriebfestigkeit bei der Bearbeitung von rostfreiem Stahl. Durch die Kombination aus robuster Schneidkante und spezieller Beschichtung wird die Standzeit verlängert, was zu weniger Werkzeugwechseln und höherer Produktivität führt. Anwender profitieren von gleichbleibender Oberflächenqualität und reduzierten Rüstzeiten bei Serienfertigungen. Präzision und Spanformung für saubere Schnitte Beim Einsatz im Außen- und Innendrehen erzeugt der 0,8 mm Eckenradius reproduzierbare Konturen und gute Kantengüte. Der integrierte Spanformer PS ist auf stabile Bedingungen abgestimmt und unterstützt eine kontrollierte Spanbildung, wodurch Nachbearbeitungen minimiert werden. Dadurch lassen sich Bearbeitungsprozesse wirtschaftlicher und prozesssicherer gestalten. Einfache Integration in ISO-Systeme und sichere Montage Die Platte im Trigon-Format ist kompatibel zu ISO-genormten Haltern; Form, Freiwinkel, Toleranzklasse und Plattendicke müssen dabei beachtet werden. Die Ausführung mit zylindrischem Loch ermöglicht eine sichere Fixierung auf dem Halter und vereinfacht den Wechsel. So bleibt die Wiederholgenauigkeit bei wechselnden Schneidplatten gewährleistet. Einsatzgebiet und Zielgruppenvorteil Diese Wendeschneidplatte richtet sich an Lohnfertiger, Industriebetriebe und Werkstätten, die rostfreien Stahl mit hohen Anforderungen an Oberflächenqualität und Prozesssicherheit bearbeiten. Durch die robuste Sorte T6215 eignet sich das Werkzeug besonders für produktive Serien und anspruchsvolle Präzisionsaufgaben, bei denen Standzeit und verlässliche Bearbeitung im Vordergrund stehen. Empfehlung: Die Tungaloy WNMG080408-PS T6215 mit CVD-beschichtetem Hartmetall bietet eine effiziente Lösung für das Drehen von rostfreiem Stahl; bei Fragen zur Einpassung in den Halter oder zur Prozessoptimierung bitte Kontakt aufnehmen unter info@metav-werkzeuge.com oder telefonisch +49 2822 7131930. Produktmerkmale Artikelnummer: 6945105 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Typ: WNMG080408-PS T6215 Hersteller SKU: TUN6945105 Fakten Eckenradius: 0,8 mm Winkel: 80° Freiwinkel: 0° Plattendicke: 4,76 mm Plattengröße: 08 Plattenform: Trigon Besonderheiten Material: Hartmetall Beschichtung: CVD-beschichtet Sorte: T6215 Spanbrecher: PS Anwendung: Drehen Werkstofffokus: rostfreier Stahl Lochstil: zylindrisches Loch Ausführung: mit Loch FAQ Welche Werkstoffe sind für die WNMG080408-PS T6215 geeignet? Die WNMG080408-PS T6215 von Tungaloy ist speziell für die Bearbeitung von rostfreiem Stahl ausgelegt; die Sorte T6215 und die CVD-Beschichtung bieten hier hohe Verschleißfestigkeit und gute Spanbildung. Wie beeinflusst der Eckenradius die Bearbeitungsergebnisse? Der Eckenradius 0,8 mm sorgt für präzise Kanten und reduziert das Risiko von Kantenausbrüchen; bei der WNMG080408-PS T6215 führt das zu besseren Oberflächen und stabileren Toleranzen. Ist die Platte mit ISO-Haltern verschiedener Hersteller kompatibel? Ja, die Platte entspricht ISO-Normen; der sichere Sitz hängt von Form, Freiwinkel, Toleranzklasse und Plattendicke ab. Für Einbauhinweise bitte die Halter-Spezifikation prüfen. Wann ist der Spanformer PS vorteilhaft? Der Spanformer PS ist vorteilhaft bei stabilen Schnittbedingungen und sorgt für kontrollierte Spanbildung; das reduziert Nacharbeit und unterstützt konstante Bearbeitungsergebnisse. Welche Vorteile bietet die CVD-Beschichtung bei dieser Sorte? Die CVD-beschichtung erhöht die Thermo- und Abriebfestigkeit der Schneidkante, was besonders bei der Bearbeitung von rostfreiem Stahl zu längeren Standzeiten und zuverlässigen Ergebnissen führt. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG 080408 T6215 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide T6215 for consistent edge life and the trigon WNMG geometry with a 0.8 mm corner radius for reliable turning of stainless steels; order directly via Metav Werkzeuge or consult our technical advisors for application support. WNMG 080408 T6215 – ISO turning insert by Tungaloy, CVD-coated carbide, trigon form The WNMG 080408 T6215 is an ISO-standard turning insert designed for stable to lightly interrupted stainless steel turning, combining a CVD-coated carbide grade with a DM chipbreaker in a trigon form for controlled chip formation and extended tool life. CVD-coated carbide grade T6215 Optimised for stainless steel turning Trigon WNMG geometry, 0.8 mm corner radius Increase throughput with robust coating and stable edge control The combination of a CVD coating and a wear-resistant carbide substrate in grade T6215 delivers improved abrasive resistance and a stable cutting edge under continuous and slightly interrupted turning. This reduces the frequency of insert changes and supports a higher component throughput. The DM chipbreaker promotes consistent chip control, lowering the risk of chip accumulation and improving process reliability on bar feeds and turret lathes. Compatibility and mounting designed for ISO systems Built to ISO plate dimensions and tolerance classes, the insert features a trigon plate form with a cylindrical hole and standard attachment geometry, ensuring compatibility with many external holders and boring bars. Compatibility depends on the holder’s form, relief angle, tolerance class, fastening method, size and thickness; this standardisation enables quick replacement and straightforward inventory management for production environments. Optimised geometry for stainless steel machining The 0.8 mm corner radius and trigon profile balance strength and accessibility, offering a robust cutting edge for roughing and a controllable edge for finishing passes. For machining stainless steel, the T6215 grade provides good wear resistance and stable chip formation under typical turning conditions, reducing built-up edge and helping to maintain surface quality across serial production. Practical benefits for workshop efficiency Choosing a grade and chipbreaker that match the workpiece material and machining stability simplifies setup and shortens ramp-up time. The ISO plate format and predictable performance of this grade support reproducible results, easier tooling selection and reduced downtime. Spare screws and mounting sets conforming to ISO specifications ensure fast changeovers and minimal interruption to the machining cycle. Contact Metav Werkzeuge today for tailored advice on integrating this Tungaloy turning insert into the production line and to request compatibility guidance for specific holders or applications. Technical Data Article number: 6945160 Manufacturer SKU: TUN6945160 SKU: 6945160-Tungaloy Label: WNMG080408-DM T6215 Item name: WNMG080408-DM T6215 Facts ISO designation: 080408 Plate size: 08 Plate thickness: 4.76 mm Corner radius: 0.8 mm Cutter angle: 80° Relief angle: 0° Hole: with hole Hole style: cylindrical Special features Material: carbide Coating / grade: CVD-coated, T6215 Chipbreaker: DM Plate form: trigon Series: ISO turning inserts Application: turning, suitable for stainless steel under stable to slightly interrupted conditions FAQ What materials is this insert suited for? The Tungaloy WNMG 080408 T6215 insert is specified for machining stainless steel under stable to lightly interrupted turning conditions, with the CVD-coated carbide grade optimised for wear resistance and chip control. How is compatibility with a holder determined? Compatibility requires matching the holder to the insert’s form, relief angle, tolerance class, fastening method, size and thickness; the ISO-standard WNMG form simplifies selection for compatible external holders and boring bars. What is the advantage of the DM chipbreaker? The DM chipbreaker on this trigon insert promotes controlled chip formation, improving evacuation and reducing the chance of chip-related interruptions during continuous turning operations. Can this insert be used for internal turning or only external turning? The ISO-format trigon insert is suitable for both external and internal turning applications provided a compatible holder or boring bar is used that accommodates the WNMG shape and mounting requirements. Which feature most affects edge life in stainless steel work? Edge life is primarily influenced by the CVD coating and the substrate grade T6215, which together enhance wear resistance and stability when turning stainless steels under appropriate cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080408 T6215 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide grade and the precise 0.8 mm corner radius for consistent, productive turning of stainless steels; the design supports stable to slightly interrupted cuts and straightforward insert replacement, ensuring sustained machining quality — order through Metav Werkzeuge or contact the consultants for tailored advice. WNMG 080408 T6215 WNMG080408-TF turning insert for turning by Tungaloy A WNMG080408-TF T6215 ISO insert engineered for turning operations, optimised for machining stainless steels under stable to slightly interrupted cutting conditions CVD-coated carbide grade T6215 Designed for stainless steel turning Trigon shape with 0° clearance 0.8 mm corner radius, with cylindrical hole High-performance coating and substrate for longer cutting cycles The combination of a CVD coating on a wear-resistant carbide substrate delivers a reliable balance between tool life and cutting performance. This cutting geometry is aimed at reducing flank wear during continuous turning, while the T6215 grade is formulated specifically for the abrasion and built-up-edge tendencies of stainless steels. As a result, production runs benefit from fewer insert changes and more consistent component tolerances, which translates directly into improved process efficiency and reduced downtime. Geometry and clamping for consistent chip control and stability The trigon plate form and integrated TF chipbreaker promote effective chip formation and evacuation in many turning scenarios. The insert’s 0° clearance and 0.8 mm corner radius deliver a robust cutting edge for external and internal turning, while the central cylindrical hole simplifies secure attachment to compatible holders. Compatibility with a given toolholder is determined by form, relief angle, tolerance class, fastening method, size and thickness, so selecting the correct holder ensures repeatable clamping and consistent surface finish. Practical benefits in the production environment Specifically designed as an ISO turning insert, this grade and geometry support repeatable results on stainless workpieces, offering predictable wear patterns and stable edge performance. The plate thickness of 4.76 mm and the 80° main cutting angle contribute to mechanical strength at the cutting edge, making the insert suitable for stable to slightly interrupted cuts where dimensional accuracy and surface integrity are priorities. Choose the appropriate chipbreaker and cutting parameters to maximise economy per part while maintaining required surface quality. For application advice, stock availability or to secure the Tungaloy WNMG080408-TF T6215 quickly, please contact Metav Werkzeuge via email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our team will assist with selection and delivery options Technical Data Article number: 6945003 Manufacturer SKU: TUN6945003 SKU: 6945003-Tungaloy Label: WNMG080408-TF T6215 Model series: ISO-Drehwendeschneidplatten Product name: WNMG080408-TF Facts Corner radius: 0.8 mm Plate thickness: 4.76 mm Size: 08 ISO code: 080408 Main angle: 80° Clearance angle: 0° Special features Material: carbide Coating: CVD-coated Chipbreaker: TF Plate form: trigon Hole: with hole (cylindrical hole) Typical application: turning (external and internal) Grade use: wear-resistant grade for stainless steels under stable to slightly interrupted conditions Compatibility determined by form, relief angle, tolerance class, fastening, size and thickness FAQ What machining tasks suit this insert best? The Tungaloy WNMG080408-TF T6215 is intended for external and internal turning of stainless steels under stable to slightly interrupted cutting conditions, offering consistent edge security and chip control. Which holder types are compatible with the insert? Compatibility depends on holder form, relief angle, tolerance class, fastening style, size and thickness; the insert’s cylindrical hole and trigon form require a matching ISO-compliant external holder or boring bar. How does the T6215 grade perform on stainless steels? T6215, a CVD-coated carbide grade, provides wear resistance and reduced built-up edge tendencies on stainless steels, extending insert life in continuous turning operations. Can this insert handle interrupted cuts? The design and thickness support slightly interrupted cuts; for heavy interruptions, selecting a holder and cutting parameters that prioritise edge strength is recommended. What are the key dimensions to check when replacing an insert? Confirm the ISO code (080408), plate size (08), thickness (4.76 mm), corner radius (0.8 mm) and hole style to ensure proper fit and clamp repeatability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080408 T9205 Wendeplatten - Tungaloy
Take advantage of a combination of high‑speed productivity and durable CVD-coated carbide for consistent turning results; the insert’s trigon form and 0.8 mm corner radius ensure reliable chip control and repeatable part quality. Order genuine Tungaloy inserts via Metav Werkzeuge or consult our advisors for grade and holder matching. WNMG 080408 T9205 – ISO Turning Insert (WNMG080408-ASW) by Tungaloy A WNMG080408-ASW T9205 indexable turning insert designed for productive external and internal turning of steel at elevated cutting speeds, offering a robust chipbreaker and ISO conformity CVD-coated cemented carbide T9205 Productive steel turning at higher speeds Trigon shape with 0.8 mm corner radius Cylindrical hole and 4.76 mm plate thickness Higher throughput through optimised grade and coating The insert’s CVD-coated cemented carbide grade T9205 is selected for productive turning of steel under stable setup conditions. The coating improves wear resistance at elevated cutting speeds, which leads to longer tool life and fewer index changes during runs. For production environments this translates into reduced downtime and a clearer cost‑per‑part profile. The combination of substrate and coating provides a balance between toughness and abrasion resistance, suitable when consistent finishes and repeatable tool life are required. Improved chip formation and geometry for reliable results With a trigon plate form, an ASW chipbreaker and a 0.8 mm corner radius, the geometry fosters controlled chip formation in typical finishing and light‑roughing operations. The 80° contour and 0° clearance support stable cutting in external and internal turning, while the central cylindrical hole ensures positive, repeatable clamping. These features reduce vibration sensitivity and help maintain dimensional accuracy, so fewer reworks and less inspection time are needed on the shopfloor. Compatibility and mounting: what determines a correct holder match Compatibility with a given toolholder is determined by the insert’s form, free angle, tolerance class, fastening, size and thickness. The insert’s ISO designation and size code facilitate selection of a matching outer holder or boring bar; ensure clamping hardware corresponds to the 4.76 mm plate thickness and the 080408 ISO format. For secure and safe operation, select a holder whose seat and screw pattern match the insert’s cylindrical hole and trigon seat to maintain cutting stability and protect the cutting edge. Practical handling, applications and recommended approach This insert excels in stable setups and medium‑to‑high cutting speeds when machining steel. It is suitable for both external and internal turning where efficient chip control and surface quality matter. For best results, pair the plate with a rigid toolholder and minimise overhang; verify the tolerance class and seat fit before advancing to full production. If process validation is required, Metav Werkzeuge’s technical consultants can advise on selecting the correct holder, chipbreaker variant and cutting parameters to match the intended application. For production environments seeking robust, long‑running performance, choose genuine Tungaloy WNMG 080408 T9205 inserts through Metav Werkzeuge or contact our specialists for precise holder and grade recommendations Technical Data Article number: 6785716 SKU: 6785716-Tungaloy Manufacturer SKU: TUN6785716 Label: WNMG080408-ASW T9205 Model series: ISO turning inserts Facts ISO code / size: 080408 Plate size: 08 Plate thickness: 4.76 mm Corner radius: 0.8 mm Contour angle: 80° Clearance angle: 0° Special features Carbide substrate: cemented carbide Coating / grade: T9205 (CVD-coated) Chipbreaker: ASW Plate form: trigon Hole: with hole (cylindrical hole) Application: turning FAQ What applications is this insert best suited for? The Tungaloy WNMG080408‑ASW T9205 insert is designed primarily for productive external and internal turning of steel under stable machining conditions and at higher cutting speeds. How does the T9205 grade affect performance? Grade T9205 combines a wear‑resistant CVD coating with a tough substrate to deliver longer life at elevated speeds; the result is more consistent tool life and fewer index changes for the insert. Which holder features are required for correct mounting? Correct mounting depends on insert form, free angle, tolerance class, fastening, size and thickness; match the toolholder seat and screw pattern to the insert’s trigon form and cylindrical hole to ensure secure clamping. Can this insert be used for roughing and finishing passes? The geometry and chipbreaker make the insert suitable for light roughing and finishing in steel; for heavy roughing, evaluate cutting parameters and machine rigidity as the grade is optimised for productive turning at higher speeds. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080408 T9205 Wendeplatten - Tungaloy
WNMG080408-DM T9205 – ISO-Drehwendeschneidplatte für Drehen | Tungaloy WNMG080408-DM T9205 ist eine ISO-genormte Drehwendeschneidplatte für produktives Drehen unter stabilen Bedingungen WNMG080408-DM T9205 von Tungaloy CVD-beschichtetes Hartmetall für Stahl Trigonform mit zylindrischem Loch für stabile Aufspannung Eckenradius 0,8 mm für präzise Konturen Freiwinkel 0° und Plattendicke 4,76 mm für genaue Führung Hohe Produktivität durch verschleißfeste Schneidstofftechnik Die Kombination aus CVD-beschichtetem Hartmetall und der Sorte T9205 ermöglicht längere Standzeiten bei erhöhten Schnittgeschwindigkeiten. Anwender profitieren von weniger Werkzeugwechseln und damit kürzeren Rüstzeiten, was die Produktivität in der Serienfertigung steigert. Die Trigonform sorgt für hohe Stabilität in der Halterung und reduziert Schwingungen, wodurch die Fertigungszeiten planbarer werden und die Ausbringung steigt. Präzise Bearbeitung und zuverlässige Spanbildung Dank des Eckenradius von 0,8 mm und des Spanbrechers DM entstehen reproduzierbare Schnittbilder und kontrollierte Späne bei Außen- und Innendrehen. Das Ergebnis ist eine verbesserte Oberflächengüte und reduzierte Nacharbeit. Für Anwender ohne tiefes Fachwissen: der Spanbrecher steuert, wie der Span zerbricht, und beeinflusst direkt Standzeit und Maßhaltigkeit. Kompatibilität, Handhabung und Systemaufbau Die Plattenkompatibilität richtet sich nach Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke. Die WNMG080408-DM T9205 lässt sich in gängige Außenhalter oder Bohrstangen einbauen; Unterlagen und Klemmsätze müssen zur Plattengeometrie passen. Das zylindrische Loch ermöglicht sichere Fixierung und einfache Montage. Anwender erhalten so eine robuste Lösung für wiederholgenaue Prozesse. Empfehlung für Einsatz und Auswahl Diese Wendeschneidplatte ist besonders geeignet für das produktive Drehen von Stahl unter stabilen Auflagebedingungen und bei mittleren bis hohen Schnittgeschwindigkeiten. Wer Prozesssicherheit und konstante Ergebnisse priorisiert, findet in dieser Platte eine wirtschaftliche Wahl. Für unterschiedliche Werkstoffe oder instabile Bearbeitungssituationen empfiehlt sich eine Anpassung von Sorte oder Spanformer. Empfehlung: Greifen Sie auf die bewährte Sortenwahl und die CVD-Technik zurück und kontaktieren Sie bei Fragen die Metav Werkzeuge Beratung unter info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 Produktmerkmale Artikelnummer: 6785758 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: WNMG080408-DM T9205 WNMG Daten Eckenradius: 0,8 mm Winkel: 80° Freiwinkel: 0° Plattendicke: 4,76 mm Plattengröße: 08 Besonderheiten Material: Hartmetall Schneidstofftyp: CVD-beschichtetes Hartmetall (CVD = chemische Gasphasenabscheidung) Sorte: T9205 (verschleißfest, für Stahl) Spanbrecher: DM (für kontrollierte Spanbildung) Plattenform: Trigon Loch: mit Loch (zylindrisches Loch) Anwendung: Drehen Systemaufbau: ISO-Drehplatte, passender Außenhalter oder Bohrstange, Unterlage/Klemmsatz, Ersatzschrauben FAQ Welche Werkstoffe lassen sich mit dieser Platte zuverlässig bearbeiten? Die WNMG080408-DM T9205 von Tungaloy ist primär für Stahl ausgelegt und liefert bei stabilen Bearbeitungsbedingungen lange Standzeiten und gute Oberflächengüten. Wie beeinflusst der Spanbrecher DM das Zerspanungsverhalten? Der Spanbrecher DM sorgt für eine kontrollierte Spanform und reduziert so Stau im Werkzeugbereich; das verbessert Maßhaltigkeit und Standzeit der WNMG080408-DM T9205. Welche Rolle spielt die CVD-Beschichtung bei der Haltbarkeit? Die CVD-beschichtung erhöht die Verschleißfestigkeit der Schneidkante und erlaubt höhere Schnittgeschwindigkeiten bei gleichbleibender Standzeit im Vergleich zu unbeschichteten Sorten. Ist die Platte für Innen- und Außenbearbeitung geeignet? Ja, die WNMG080408-DM T9205 ist für Außen- und Innendrehen ausgelegt; die Trigonform und das zylindrische Loch unterstützen stabile Spannverhältnisse. Welche Plattendicke und Freiwinkel sind relevant für die Wahl des Halters? Die Plattendicke 4,76 mm und der Freiwinkel 0° sind maßgeblich für die Halterkompatibilität; Halter müssen diese Werte unterstützen, um sichere Klemmbedingungen zu gewährleisten. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG 080408 T9205 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated T9205 wear resistance and ISO‑compliant geometry for efficient, high‑speed turning of steel; reliable chip control and a trigon form reduce downtime and secure consistent surface quality. Order the WNMG080408 T9205 insert directly via Metav Werkzeuge or consult our specialists for application support. WNMG080408 T9205 — ISO turning insert for productive steel turning (Tungaloy) WNMG080408 T9205 is an ISO‑standard trigon insert designed for productive external and internal turning of steel under stable machining conditions ISO‑standard trigon insert WNMG080408 CVD‑coated T9205 for wear resistance 0.8 mm corner radius for predictable finish Double‑sided chipbreaker with cylindrical hole Enhanced productivity with CVD‑coated carbide The CVD‑coated carbide grade T9205 delivers high wear resistance and thermal stability for productive turning of steel. In practice, the coating minimises flank and crater wear at elevated cutting speeds, which extends the interval between indexings and tool changes. This results in a measurable improvement in process efficiency and contributes to a lower cost per component when combined with the insert’s double‑sided configuration. The wear characteristics of this grade make it especially suitable for stable setups where higher cutting parameters are feasible. Consistent geometry for predictable results Built to the ISO specification, the trigon form and the defined relief ensure compatibility with standard holders when form, relief angle, tolerance class, fixing method, size and thickness match. The 80° main cutting angle and a 0.8 mm corner radius yield a balance between strength and edge definition, helping to maintain dimensional accuracy and surface quality. Using ISO‑compliant inserts simplifies tooling logistics on the shop floor, supports repeatable clamping, and reduces set‑up time across different machines and fixtures. Reliable chip control and extended service life The double‑sided chipbreaker combined with a cylindrical hole supports stable mounting and effective chip formation for a range of turning tasks. Double‑sided inserts provide multiple indexable edges, which increases overall life per insert and reduces consumable turnover. Thoughtful chip control contributes to consistent surface finishes and reduces the risk of rework caused by poor swarf evacuation. Select the appropriate chipbreaker and grade based on material, cutting mode and machine stability to get the intended benefit from the geometry. System compatibility that lowers downtime The insert is part of a simple system: ISO insert, matching external holder or boring bar, backing pad/clamp set and replacement screw. The 4.76 mm plate thickness and trigon shape combine to provide a stable clamping interface when paired with a correctly specified holder. Correct component matching lowers vibration, improves tool life and helps maintain process reliability. For production environments focused on predictable cycle times and high repeatability, this insert supports a cost‑effective machining strategy when integrated into a complete tooling system. For reliable, productive turning with Tungaloy inserts, contact Metav Werkzeuge for tailored application advice and fast availability Technical data Article number: 6785719-Tungaloy Manufacturer SKU: TUN6785719 Manufacturer article number: 6785719 Model series: ISO turning inserts Designation: WNMG080408 T9205 Facts Corner radius: 0.8 mm Insert size: 08 Main angle: 80° Plate thickness: 4.76 mm Relief angle: 0° Plate form: trigon Hole: with cylindrical hole Special features Material: carbide Coating/sort: T9205 (CVD‑coated carbide) Chipbreaker: double‑sided Application: turning (external and internal) System components: insert, suitable holder or boring bar, backing pad/clamp and replacement screw Compatibility determined by form, relief angle, tolerance class, fixing method, size and thickness FAQ What material applications are suitable for this insert? The WNMG080408 T9205 is optimised for turning of steel under stable machining conditions; the CVD‑coated carbide grade T9205 gives good wear resistance for productive steel machining. How does the trigon form affect tool life and cutting forces? The trigon plate form and 0.8 mm corner radius provide a strong cutting edge and even distribution of cutting forces, which supports longer tool life and stable cutting when used with an appropriate holder. Can the insert be used on internal turning operations? Yes, the ISO‑standard geometry and the double‑sided chipbreaker make the insert suitable for both external and internal turning applications, provided the holder geometry and clearance are compatible. How many indexable edges does the insert offer? The insert is double‑sided, offering multiple indexable edges to extend the service life per insert and reduce consumable changeover frequency. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
WNMG 080408 T9205 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide grade T9205 and the ISO-compliant WNMG geometry for productive steel turning under stable conditions; match the insert to the holder by checking form, relief angle, tolerance and thickness. Order the insert directly via Metav Werkzeuge or consult the team for application advice. WNMG 080408 T9205 — Turning insert (ISO WNMG 080408) by Tungaloy WNMG080408-TH T9205 is an ISO-format trigon turning insert intended for productive external and internal turning of steel, featuring a wear-resistant CVD-coated carbide grade. ISO WNMG 080408 form for standard holders CVD-coated carbide grade T9205 for wear resistance 0.8 mm corner radius for versatile turning Trigon shape with 0° relief angle Chipbreaker TH for controlled chip formation Increased productivity through wear-resistant grade and coating The combination of a CVD-coated carbide substrate and the T9205 grade yields consistent wear resistance under elevated cutting speeds, which translates into longer tool life and fewer indexings. In practical terms, this means less unscheduled downtime and a steadier surface finish during longer production runs. The coating enhances thermal and abrasive resistance; the result is reliable performance when machining steel in stable set-ups and at higher feeds and speeds. Confident fit: ISO compatibility and holder matching The insert follows ISO-standard dimensions, but correct integration requires attention to several parameters: form, relief angle (0°), tolerance class, method of fixing, plate size and thickness. These factors determine whether the insert seats correctly and clamps securely in the chosen external holder or boring bar. Verifying these criteria before installation prevents vibration, uneven wear and compromised results. The standardisation simplifies sourcing compatible holders once the precise WNMG 080408 specification is confirmed. Geometry tuned for stability and chip control The trigon plate form combined with the TH chipbreaker provides consistent chip control for a broad range of cutting conditions. The 0.8 mm corner radius balances robustness and dimensional control: it supports stable cutting forces while permitting clean edge engagement for finishing passes. The insert’s cylindrical hole facilitates repeatable clamping and accurate seating, which helps to maintain part tolerances and surface quality across multiple indexings. Seamless integration into production workflows Designed as part of an insert-based tooling system, the plate works together with a matching external holder, a support/locking set and replacement screws to form a complete turning assembly. This modular approach reduces setup time and simplifies inventory management: keep a stock of inserts and consumable fastenings to limit interruptions. The insert is optimised for productive turning in stable conditions, making it well suited to batch production and series work where consistent tool behaviour is essential. Contact Metav Werkzeuge today for availability and application guidance on the Tungaloy WNMG080408-TH T9205 turning inserts; Metav Werkzeuge’s consultants can advise on holder compatibility and optimal cutting parameters Technical data Article number: 6785759 SKU: 6785759-Tungaloy Manufacturer SKU: TUN6785759 Designation: WNMG080408-TH Series: ISO turning inserts Grade: T9205 Material: CVD-coated carbide Numbers / Core technical data Corner radius: 0.8 mm Plate thickness: 4.76 mm Plate size: 08 ISO code: 080408 Included angle: 80° Relief angle: 0° Design / Special features Trigon plate form Chipbreaker TH Cylindrical hole for fixing Compatible with ISO-standard holders when matched by form and dimensions Intended application: turning (external and internal) Recommended material application: steel System components: insert, external holder or boring bar, support/clamp set, replacement screws FAQ What materials is this insert best suited for? The Tungaloy WNMG080408-TH T9205 insert is designed primarily for machining steel, offering good wear resistance and performance under stable cutting conditions. What does the T9205 grade provide? T9205 is a CVD-coated carbide grade that improves abrasive and thermal resistance, supporting longer tool life and steadier performance at higher cutting speeds. Which geometry and chipbreaker does the insert use? The plate has a trigon form with a TH chipbreaker, a 0.8 mm corner radius and a 0° relief angle, together offering balanced chip control and edge strength. Can this insert be used for both external and internal turning? Yes, the insert is suitable for both external and internal turning operations, provided that the chosen holder and setup match the insert’s ISO dimensions and clamping requirements. How is holder compatibility determined? Compatibility depends on the insert’s form, relief angle, tolerance class, fixing method, size and thickness; checking these parameters ensures secure clamping and accurate seating for reliable machining. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080408 T9205 Wendeplatten - Tungaloy
WNMG080408-SW T9205 ISO-Drehwendeschneidplatten zum Drehen von Stahl — Tungaloy Die WNMG080408-SW T9205 ist eine ISO-genormte Drehwendeschneidplatte für das produktive Außen- und Innendrehen von Stahl unter stabilen Schnittbedingungen. WNMG080408-SW T9205 von Tungaloy CVD-beschichtetes Hartmetall für hohe Standzeit Trigonform mit zylindrischem Loch für stabile Befestigung Eckenradius 0,8 mm für universelle Einsatzfälle Freiwinkel 0° optimiert für kraftvolle Stahlbearbeitung Wirtschaftliche Zerspanung bei stabilen Prozessen Die WNMG080408-SW T9205 bietet mit ihrer CVD-beschichteten Hartmetall-Sorte eine gezielte Mischung aus Verschleißfestigkeit und Schnittfreudigkeit. Die Sorte T9205 wurde entwickelt, um bei erhöhten Schnittgeschwindigkeiten und stabiler Maschinenführung konstante Standzeiten zu liefern. Für Anwender bedeutet das weniger Werkzeugwechsel, höhere Ausbringung und planbare Rüstintervalle bei Serienfertigungen. Passgenaues System für Halter und Montage Dank ISO-genormter Abmessungen ist die Wendeplatte einfach in gängigen Außenhaltern und Bohrstangen integrierbar. Die trigon-Form und das zylindrische Loch sorgen für wiederholgenaue Positionierung und sichere Spannkraft; die Plattendicke von 4,76 mm unterstützt stabile Auflage und Kraftübertragung. Wer Halter, Unterlage und Befestigung richtig kombiniert, minimiert Vibrationen und verbessert Oberflächengüte. Typische Einsatzfelder und Zielgruppe Die Platte richtet sich an Lohnfertiger, Maschinenbauer und Werkstätten, die robustes Drehen von Stahl benötigen. Sie eignet sich besonders für Außen- und Innendrehen bei stabilen Spannverhältnissen und mittel- bis hochproduktiven Bearbeitungsstrategien. Beim Einsatz von Spanbrechern wie Spanbrecher SW lässt sich der Spanfluss optimieren; die Auswahl des Spanbrechers sollte an Werkstoff, Schnittbedingungen und Stabilität angepasst werden. Auswahl- und Handhabungsempfehlungen für Anwender Der Eckenradius 0,8 mm bietet einen guten Kompromiss zwischen Schnittkraft und Kantentragfähigkeit; er ist universell einsetzbar für vielfältige Schnittdaten. Der Freiwinkel 0° reduziert Krafteinleitung bei kraftvollen Schnitten, erfordert jedoch stabile Aufspannung. Bei Unsicherheit zur Holderkompatibilität empfiehlt sich der Abgleich von Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke vor der Bestellung. Für produktivere Dreharbeiten empfiehlt sich die T9205-Sorte von Tungaloy — fragen Sie unsere Anwendungstechnik unter info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 an. Technische Daten Artikelnummer: 6785655 Marke: Tungaloy Modellserie: ISO-Drehwendeschneidplatten Bezeichnung: WNMG080408-SW T9205 SKU Hersteller: TUN6785655 Daten Eckenradius: 0,8 mm Winkel: 80° Freiwinkel: 0° Plattendicke: 4,76 mm Plattengröße: 08 Besonderheiten Material: Hartmetall Schneidstofftyp: CVD-beschichtetes Hartmetall Sorte: T9205 Plattenform: trigon Loch: mit Loch, zylindrisches Loch Spanbrecher: SW (Spanbrechervariante für mittlere bis stabile Schnitte) ISO-genormt FAQ Was zeichnet die WNMG080408-SW T9205 besonders aus? Die WNMG080408-SW T9205 von Tungaloy kombiniert eine CVD-beschichtete Hartmetall-Sorte mit einer trigon-Form und einem Eckenradius von 0,8 mm, was zu hoher Standzeit und stabiler Spanbildung beim Drehen von Stahl führt. Für welche Werkstoffe ist diese Wendeschneidplatte geeignet? Die Platte wurde speziell für das produktive Drehen von Stahl entwickelt; die Sorte T9205 liefert gute Ergebnisse bei erhöhten Schnittgeschwindigkeiten unter stabilen Bedingungen. Wie beeinflusst der Freiwinkel 0° die Bearbeitung? Ein Freiwinkel von 0° ermöglicht kraftvolle Schnitte und gute Kantentragfähigkeit; das erfordert jedoch eine stabile Werkstück- und Werkzeugaufspannung für optimale Ergebnisse mit der WNMG080408-SW T9205. Welche Rolle spielt der Spanbrecher SW? Der Spanbrecher SW ist auf kontrollierten Spanabtransport ausgelegt und unterstützt die T9205-Sorte dabei, gleichmäßige Späne und konstante Oberflächen zu erzielen. Die Kombination verbessert Prozesssicherheit und Produktivität. Wie erkenne ich die Kompatibilität mit meinem Halter? Prüfen Sie Form, Freiwinkel, Toleranzklasse, Befestigungsart, Größe und Dicke Ihrer Halterung; die ISO-genormte Bezeichnung WNMG080408-SW erleichtert den Abgleich mit gängigen Außenhaltern. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG 080408 T9205 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide wear resistance and an AS chipbreaker designed for productive steel turning to keep cycle times low and tool changes predictable; order directly via Metav Werkzeuge or ask the consultants for application support. WNMG 080408 T9205 — Trigon indexable insert for turning by Tungaloy, CVD-coated carbide with AS chipbreaker The WNMG080408-AS T9205 is an ISO-standard trigon turning insert for productive external and internal turning of steel, engineered for stable setups and higher cutting speeds. Trigon insert, ISO WNMG 080408 CVD-coated carbide, grade T9205 Optimised AS chipbreaker for steel Compatible with standard ISO holders High productivity through hardened grade and chip control The combination of a CVD-coated carbide substrate and the T9205 grade delivers enhanced wear resistance and consistent edge life under stable machining conditions. The AS chipbreaker is tailored for steel cutting, promoting reliable chip formation and evacuation which reduces the need for manual intervention. As an ISO standard insert in a trigon format, it is designed to fit common clamping systems; correct matching of holder form, clearance angle, tolerance class, fastening and thickness ensures secure seating and predictable tool life. Clear advantages for process stability and surface finish The trigon geometry with a 0.8 mm corner radius balances robustness and surface quality: the modest radius reduces cutting forces compared with larger radii while still permitting good finish in finishing and light semi-finishing operations. The insert thickness of 4.76 mm gives the body stiffness needed for repetitive cycles in production. The term CVD-coated indicates a chemical vapour deposition layer that enhances abrasion resistance without compromising toughness, making the solution particularly suitable when prioritising longer tool life and lower tooling costs per component. System-level thinking reduces downtime and simplifies sourcing Used as part of an ISO indexable turning system, the insert works together with a matching external holder or boring bar, plus a proper shim/clamping set and spare screws. Choosing the correct holder geometry, free angle and tolerance class is essential for achieving the promised performance of the grade. This indexable approach enables quick seat changes and minimal setup time, translating into higher machine availability and consistent part quality across production batches. The insert is intended specifically for turning applications on steel under stable conditions and at elevated cutting speeds. For Tungaloy applications based on the T9205 grade, contact Metav Werkzeuge for tailored recommendations and holder compatibility to ensure maximum process reliability. Technical Data Article number: 6785757 SKU: 6785757-Tungaloy Manufacturer article number: TUN6785757 Model series: ISO indexable turning inserts Numbers / Core technical data Size designation: 08 (WNMG 080408) Insert designation: 080408 Thickness: 4.76 mm Corner radius: 0.8 mm Rake/clearance angle: 0° Included hole: cylindrical hole Main angle: 80° Special features Material: Hartmetall (carbide) Grade / coating: T9205 (CVD-coated) Chipbreaker: AS Plate form: trigon Application: turning System composition: ISO insert, suitable external holder or boring bar, shim/clamping set, spare screws FAQ What materials is this insert suited for? This trigon insert is formulated for productive turning of steel; the T9205 grade and CVD-coated carbide construction are optimised for steel machining under stable conditions. How does the AS chipbreaker affect machining? The AS chipbreaker promotes controlled chip formation and evacuation in steel turning, improving process reliability and reducing manual chip control measures on the machine. Which holders fit this insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness; the insert is ISO-standard WNMG 080408 and matches holders designed for that format. What does the 0.8 mm corner radius mean for surface finish? A 0.8 mm corner radius offers a compromise between strength and finish quality, allowing light semi-finishing or finishing passes with good surface results while maintaining insert robustness. Is this insert suitable for internal turning as well as external? Yes; the trigon WNMG 080408-AS T9205 is suitable for both external and internal turning when used with an appropriate boring bar or holder that supports the ISO WNMG format. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080408 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide wear resistance, a versatile 0.8 mm corner radius and optimised chip control for a productive turning process; order the inserts via Metav Werkzeuge or consult the technical team for application-specific guidance. WNMG 080408 T9215 — Trigon Turning Insert by Tungaloy (CVD-coated carbide, TM chipbreaker) WNMG080408-TM T9215 is an ISO-standard turning insert designed for medium-steel machining, offering high wear resistance and reliable performance in continuous and light interrupted cuts. CVD-coated carbide grade T9215 Optimised TM chipbreaker design Trigon insert with cylindrical hole 0.8 mm corner radius for versatility ISO 080408 for standardised holders Engineered for consistent productivity in medium-steel turning The insert is manufactured from CVD-coated carbide, grade T9215, which combines extended tool life with improved fracture resistance. This composition is specifically chosen for medium steel applications, where abrasive wear and moderate mechanical shocks occur. The result is a measurable increase in cutting time between changes and fewer unplanned tool exchanges, which supports steady production flow and lowers process costs. The coating process enhances surface hardness and thermal stability, enabling higher cutting speeds while maintaining dimensional control and predictable tool wear. Geometry and clamping that ensure repeatable results The trigon shape with a cylindrical hole and defined ISO dimensions ensures secure clamping in compatible holders; compatibility depends on form, relief, tolerance class, fastening, size and thickness. The insert’s 0° relief angle and an 80° cutting edge angle contribute to a robust cutting geometry that resists chipping under load. The TM chipbreaker is optimised for consistent chip formation in the targeted material range, improving evacuation and reducing the risk of re-cutting. Such stable cutting behaviour supports a better surface finish and reduces the need for secondary operations. Practical selection guidance for reliable machining For turning tasks where a balance of wear resistance and fracture toughness is required, the grade T9215 provides a practical compromise between life and robustness. The 0.8 mm corner radius offers versatility for both general finishing and light roughing, while the trigon form increases edge security in interrupted cuts. Selection of chipbreaker and grade should be matched to workpiece material, cut stability and the intended cutting strategy; when set up correctly, the insert promotes longer tool life, reduced downtime and higher hourly throughput. Operators benefit from fewer tool changes and improved process stability, contributing directly to a lower total cost of machining. For production environments seeking durable, high-productivity inserts, request Tungaloy WNMG080408-TM T9215 from Metav Werkzeuge for availability and application advice via info@metav-werkzeuge.com or phone +49 2822 7131930 Technical Data Article number: 6772400 SKU: 6772400-Tungaloy Manufacturer SKU: TUN6772400 Brand: Tungaloy Model series: ISO turning inserts Name: WNMG080408-TM T9215 Application: Turning Facts Corner radius: 0.8 mm Plate thickness: 4.76 mm Insert size: 08 ISO code: 080408 Cutting edge angle: 80° Relief angle: 0° Hole: cylindrical Special features Material: carbide with CVD coating Grade: T9215 Chipbreaker: TM Shape: trigon Suitable for: medium steel, continuous and light interrupted cuts Compatibility: ISO-standard holders, defined by form, relief, tolerance class, fastening, size and thickness FAQ What material range is this insert intended for? The WNMG080408-TM T9215 insert is intended primarily for medium steel machining and performs well in continuous and light interrupted cutting conditions. What advantages does the T9215 grade offer? Grade T9215 is a CVD-coated carbide formulation that offers good wear resistance combined with fracture toughness, supporting higher productivity and consistent tool life. How does the TM chipbreaker affect machining? The TM chipbreaker on this trigon insert promotes stable chip formation and evacuation in the targeted material range, improving surface finish and reducing recutting. Is the insert compatible with standard ISO holders? Yes, the ISO designation 080408 identifies the insert geometry; compatibility with toolholders is established by matching form, relief, tolerance class, fastening, size and thickness. For which types of turning is the 0.8 mm corner radius suitable? The 0.8 mm corner radius provides versatility across finishing and light roughing tasks, offering a balance between edge strength and achievable surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080408 T9215 Wendeplatten - Tungaloy
Take advantage of the CVD‑coated carbide grade T9215 and the secure trigon mounting to increase tool life and process stability, especially in medium steel turning; order directly via Metav Werkzeuge or consult the team for holder compatibility. WNMG 080408 T9215 – WNMG 080408 turning insert for medium steel by Tungaloy The WNMG080408-AFW T9215 is an ISO‑standard trigon indexable turning insert designed for external and internal turning operations in medium steel machining. CVD-coated carbide grade T9215 Trigon WNMG form for secure seating 0° clearance angle for robust cutting Cylindrical hole fixing, 4.76 mm thickness Durable grade for productive medium steel machining The CVD-coated carbide composition of grade T9215 combines high wear resistance with enhanced fracture toughness, so tool life is extended under continuous and slightly interrupted cutting conditions. A chemical vapour deposition layer adds a hard, adherent surface that slows flank and crater wear, which leads to more consistent component tolerances and fewer insert changes during a production shift. This performance characteristic benefits process planning and reduces unscheduled downtime, supporting higher overall productivity without compromising surface finish. Stable geometry and secure mounting for predictable results The trigon-shaped WNMG design provides a stable seating and positive clamping position in compatible holders; compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness. The insert features a 0° clearance angle and a 0.8 mm corner radius, combined with a 4.76 mm plate thickness and a cylindrical centre hole for secure fixation. These geometric attributes translate into repeatable cutting engagement and predictable tool life, which simplifies fixture selection and minimises vibration during turning operations. Chip control and application range for efficient production Equipped with the AFW chipbreaker, the insert channels chips reliably in external and internal turning of medium steel, improving swarf evacuation and reducing the risk of built-up edge. The grade is specified for continuous to lightly interrupted cuts, making it suitable for bar turning, shaft shoulders and facing operations where steady metal removal and good edge stability are required. Selecting the correct chipbreaker and matching the grade to the workpiece material ensures consistent surface quality and machining economy. Practical advice for selection and integration When replacing or specifying inserts, match the insert geometry and tolerance class to the chosen holder and fastening method; small deviations in seating can affect runout and surface finish. For mixed production runs, the carbide substrate and T9215 coating offer a broad balance between wear resistance and toughness, reducing the need for frequent grade changes. Where interrupted cuts or heavy engagement are expected, consider a holder with improved rigidity and confirm the insert clamping torque recommended by the holder manufacturer. Contact Metav Werkzeuge for technical advice on Tungaloy carbide inserts and holder compatibility — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6773888 Manufacturer SKU: TUN6773888 SKU: 6773888-Tungaloy Model series: ISO turning inserts Designation: WNMG080408-AFW Grade: T9215 Facts Corner radius: 0.8 mm Thickness: 4.76 mm Insert size: 08 Centre hole: cylindrical Clearance angle: 0° Insert angle: 80° Special features Material: Carbide (CVD-coated) Chipbreaker: AFW Plate form: Trigon Application: Turning (external and internal) Typical use: Medium steel machining Compatibility: Defined by shape, clearance, tolerance, fastening, size and thickness FAQ What materials is this insert best suited for? The WNMG080408-AFW T9215 insert is optimised for medium steel machining; the T9215 grade balances wear resistance and toughness for productive steel turning. Can the insert be used for interrupted cuts? Yes, the Tungaloy T9215 grade is designed for continuous to lightly interrupted cuts; for heavy interruptions, a more robust geometry or alternative grade should be considered. How does the AFW chipbreaker affect chip control? The AFW chipbreaker promotes short, manageable chips in turning operations, improving swarf evacuation and reducing the risk of built-up edge when machining medium steel. What should be checked when fitting the insert to a holder? Ensure the holder matches the trigon form, 0° clearance, tolerance class, fastening type and the insert thickness of 4.76 mm to guarantee proper seating and repeatable results with the WNMG080408-AFW. Is this a standard ISO insert and how is compatibility determined? The insert follows ISO turning insert conventions; compatibility is determined by the insert form, clearance angle, tolerance class, fastening arrangement, size and thickness. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080408 T9215 Wendeplatten - Tungaloy
WNMG 080408 T9215 Drehwendeschneidplatte für Drehen – Tungaloy Die WNMG080408-ZM T9215 ist eine ISO-genormte Trigon-Wendeschneidplatte für präzises Außen- und Innendrehen bei mittleren Stahlbeanspruchungen. ISO-genormt für einfache Einsetzbarkeit CVD-beschichtetes Hartmetall für lange Standzeit Spanbrecher ZM für stabile Spanbildung Mit zylindrischem Loch für sichere Klemmung Plattendicke 4,76 mm für robuste Auflage Höhere Produktivität durch optimierten Schneidstoff Die Kombination aus CVD-beschichtetem Hartmetall und der Sorte T9215 bietet ausgeprägten Verschleißwiderstand bei gleichzeitig guter Bruchsicherheit. Dadurch steigt die Standzeit und die Maschine erreicht größere Ausbringungsmengen pro Werkzeugwechsel. Für Fertigungsbetriebe bedeutet das geringere Werkzeugkosten pro Bauteil und konstantere Prozessparameter bei kontinuierlichem bis leicht unterbrochenem Schnitt. Präzise Kompatibilität und einfache Auswahl Dank ISO-genormter Geometrie lässt sich die Platte schnell mit passenden Außenhaltern oder Bohrstangen kombinieren. Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke bestimmen die Kompatibilität; die standardisierte Kennzeichnung erleichtert die Auswahl im Ersatzteillager. Der Spanbrecher ZM ist speziell auf mittlere Stahlqualitäten ausgelegt und sorgt für kontrollierte Spanform bei variierenden Schnittbedingungen. Robuste Konstruktion für sichere Bearbeitung Die Trigon-Form mit Eckenradius 0,8 mm und Plattendicke 4,76 mm bietet eine ausgewogene Mischung aus Stabilität und Schnittpräzision. Der Freiwinkel von 0° unterstützt stabile Schnittkräfte bei planenden Operationen, während das zylindrische Loch eine reproduzierbare und feste Klemmung gewährleistet. Anwender erhalten so reproduzierbare Oberflächengüten und geringere Ausschussraten bei Serienfertigungen. Zielgruppe und wirtschaftlicher Nutzen Konzipiert für Serienfertiger, Lohnbearbeiter und Instandhaltungsabteilungen, eignet sich die Platte für Anwendungen, bei denen Prozesssicherheit und Wirtschaftlichkeit im Vordergrund stehen. Die robuste Beschichtung reduziert Stillstand durch Werkzeugwechsel, und die zuverlässige Spankontrolle erleichtert Nachbearbeitungsschritte. Produktivität, Standzeit und Planbarkeit werden so messbar verbessert. Empfehlung: Für anspruchsvolle Stahlanwendungen die WNMG080408-ZM T9215 von Tungaloy wählen und bei Fragen die technische Beratung von Metav Werkzeuge per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 kontaktieren Produktmerkmale Artikelnummer: 6772407 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: WNMG Daten Eckenradius: 0,8 mm Plattendicke: 4,76 mm Winkel: 80° Plattengröße: 08 Hersteller SKU: TUN6772407 Besonderheiten Material: Hartmetall Beschichtung: T9215 (CVD = chemische Gasphasenabscheidung) Schneidstofftyp: CVD-beschichtetes Hartmetall Plattenform: Trigon Loch: mit Loch Lochstil: zylindrisches Loch Spanbrecher: ZM (optimiert für mittlere Stahlbearbeitung) Freiwinkel: 0° FAQ Welche Materialien lassen sich mit der WNMG080408-ZM T9215 bearbeiten? Die WNMG080408-ZM T9215 von Tungaloy ist primär für mittlere Stahlqualitäten ausgelegt und liefert dort hohe Standzeit und stabile Spanbildung. Wie wird die Kompatibilität zum Halter sichergestellt? Kompatibilität ergibt sich aus Form, Freiwinkel, Toleranzklasse, Befestigungsart, Größe und Dicke; die ISO-Kennzeichnung erleichtert die Zuordnung zu passenden Außenhaltern. Was bewirkt die CVD-Beschichtung der Sorte T9215? Die CVD-Beschichtung erhöht den Verschleißwiderstand und verbessert die Bruchsicherheit, was insbesondere bei hohen Schnittvolumen zu längeren Einsatzzeiten führt. Welche Vorteile bietet der Spanbrecher ZM? Der Spanbrecher ZM sorgt für kontrollierte Spanform und reduziert Spanverknotungen, was die Maschinenverfügbarkeit und Oberflächenqualität positiv beeinflusst. Ist die Platte für unterbrochene Schnitte geeignet? Ja, die WNMG080408-ZM T9215 ist für kontinuierliche bis leicht unterbrochene Schnitte ausgelegt und bietet dabei stabile Performance. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG 080408 T9215 Wendeplatten - Tungaloy
WNMG 080408 T9215 ISO-Drehwendeschneidplatte für Drehen WNMG 080408 T9215 verbindet Verschleißschutz und Zähigkeit für effiziente Drehbearbeitung CVD-beschichtetes Hartmetall T9215 Für mittlere Stahlbearbeitung optimiert Trigonform mit Eckenradius 0,8 mm Mit zylindrischem Loch für sichere Befestigung ISO-genormt, kompatibel mit gängigen Haltern Haltbarkeit und Verschleißschutz für Dauerbetrieb Die Wendeschneidplatte aus Hartmetall mit CVD-beschichtung bietet eine hohe Beständigkeit gegenüber Abrieb und thermischer Belastung. Die T9215-Sorte ist speziell für die mittlere Stahlbearbeitung entwickelt worden und kombiniert Verschleißwiderstand mit Bruchsicherheit. Anwender profitieren von geringeren Werkzeugwechseln und gleichbleibender Qualität der Bauteiloberfläche, was die Fertigungsprozesse stabilisiert. Präzision und Stabilität bei der Zerspanung Dank der Trigonform und des Eckenradius 0,8 mm liefert die Platte sichere Kantenlage und konstante Schnitttiefe auch bei unterschiedlichen Vorschüben. Die Form sorgt für optimale Spanabfuhr und verbessert die Stabilität beim Außen- und Innendrehen. Für Anwendungen mit leicht unterbrochenem Schnitt bleibt die Kombination aus Form und Spanbrecher besonders robust und planbar. Wirtschaftlichkeit durch längere Standzeit Die Verbindung aus moderner Legierung und Beschichtung reduziert Stillstandzeiten und erhöht die Produktivität in Serienfertigungen. Durch die robuste Schneidkante sinken Rüstaufwand und Nacharbeit, wodurch sich die Investition in die Platte schnell amortisieren kann. Hersteller, die auf konstante Ergebnisse setzen, erhalten eine wirtschaftliche Lösung für mittlere Stahlanwendungen. ISO-Kompatibilität vereinfacht Auswahl und Einsatz Die ISO-genormte Ausführung garantiert die Kompatibilität zu gängigen Außenhaltern und Bohrstangen; wichtige Kriterien sind Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke. Vor Bestellung prüfen, ob der Freiwinkel 0°, die Plattendicke 4,76 mm und das zylindrische Loch zur Halterausführung passen, um einfache Montage und sichere Fixierung zu gewährleisten. Mit der Tungaloy T9215-Wendeplatte die Fertigungsleistung steigern – bei Metav Werkzeuge anfragen per E-Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 6772403 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: WNMG080408-NM T9215 Hersteller SKU: TUN6772403 Daten Eckenradius: 0,8 mm Plattendicke: 4,76 mm Winkel: 80° Plattengröße: 08 Besonderheiten Material: Hartmetall Beschichtung: CVD (chemische Gasphasenabscheidung) Sorte: T9215 Schneidstofftyp: CVD-beschichtetes Hartmetall Einsatz: Drehen; Außen- und Innendrehen Spanbrecher: NM Loch: mit Loch Lochstil: zylindrisches Loch Plattenform: Trigon Freiwinkel: 0° FAQ Welche Werkstoffe eignet sich die WNMG080408-NM T9215 am besten zu bearbeiten? Die WNMG080408-NM T9215 von Tungaloy ist erste Wahl für die mittlere Stahlbearbeitung und liefert besonders bei kontinuierlichem bis leicht unterbrochenem Schnitt stabile Ergebnisse. Welche Rolle spielt die CVD-Beschichtung bei dieser Wendeschneidplatte? Die CVD-Beschichtung erhöht den Verschleißwiderstand und schützt die Schneidkante gegen thermische und abrasive Beanspruchung, was die Standzeit der Tungaloy T9215 deutlich verbessert. Wie beeinflusst der Eckenradius die Bearbeitung? Der Eckenradius 0,8 mm sorgt für ausgewogene Schnittkräfte und gute Kantenschonung; er eignet sich besonders für präzise Außen- und Innendreharbeiten, bei denen stabile Oberflächen gefordert sind. Ist die Platte mit allen gängigen Haltern kompatibel? Als ISO-genormte Wendeschneidplatte ist die WNMG080408-NM T9215 kompatibel mit vielen Standardhaltern; die Kompatibilität hängt von Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke des Halters ab. Welche Vorteile bietet der Spanbrecher NM? Der Spanbrecher NM ist für eine breite Palette von Schnittbedingungen ausgelegt, verbessert die Spanformung und reduziert das Risiko von Spanverwirbelungen bei mittleren Stahlqualitäten. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG 080408 T9215 Wendeplatten - Tungaloy
Take advantage of a CVD-coated carbide grade that combines wear resistance with fracture toughness for productive medium-steel turning; the ISO-compatible, trigon-shaped insert with a 0.8 mm corner radius and central cylindrical hole ensures secure clamping and repeatable results. Order through Metav Werkzeuge or consult the technical team for application‑specific selection. WNMG 080408 T9215 — ISO turning insert, CVD-coated carbide, trigon The WNMG080408-TS T9215 is an ISO‑compliant trigon indexable insert for external and internal turning, engineered for medium‑steel machining with a TS chipbreaker. CVD-coated carbide grade T9215 Trigon insert, 80° geometry 0.8 mm corner radius for versatility Compatible with ISO turning holders Consistent productivity through high‑performance grade and coating The combination of a CVD-coated surface and the T9215 carbide microstructure delivers elevated wear resistance while maintaining fracture toughness, which is essential for continuous to slightly interrupted cuts. This balance reduces tool changes and increases machining uptime, resulting in a measurable gain in throughput. By selecting a grade optimised for medium steel, the insert supports stable cutting forces and predictable tool life, which simplifies process planning and lowers per‑part costs. Secure clamping and geometry designed for repeatable accuracy Manufactured to ISO dimensions with a trigon form and 80° geometry, the insert seats reliably in standard toolholders; compatibility is governed by shape, clearance angle, tolerance class, fastening and thickness. The central cylindrical hole and a plate thickness of 4.76 mm provide a secure mechanical location, while the 0.8 mm corner radius offers a compromise between edge strength and achievable surface finish. These characteristics promote dimensional repeatability and reduce the need for frequent rework in production environments. Application guidance and handling for stable results The TS chipbreaker is matched to the grade for efficient chip control when turning medium steel and helps prevent built‑up edge in typical production feeds and speeds. Use in both external and internal turning operations is appropriate; for heavily interrupted cuts or different workpiece materials, select a chipbreaker or grade aligned with those conditions. For optimal performance, pair the insert with a compatible ISO toolholder and verify clearance and runout; Metav Werkzeuge’s application consultants can advise on the correct holder geometry and cutting parameters for the intended operation. For high‑productivity medium‑steel turning, request the Tungaloy WNMG080408-TS T9215 insert through Metav Werkzeuge or contact our specialists at info@metav-werkzeuge.com / +49 2822 7131930 for tailored selection advice Technical data Article number: 6772380 SKU: 6772380-Tungaloy Manufacturer SKU: TUN6772380 Model series: ISO-Drehwendeschneidplatten Product label: WNMG080408-TS T9215 Facts Corner radius: 0.8 mm Plate thickness: 4.76 mm Geometry angle: 80° Clearance angle: 0° Size designation: 08 Special features CVD-coated carbide grade T9215 TS chipbreaker Trigon insert form Central cylindrical hole for clamping ISO‑compliant turning insert Intended for medium steel machining Compatible with ISO turning holders FAQ What materials is this insert best suited for? The insert is optimised for medium steel applications; its T9215 carbide and CVD coating combine wear resistance with toughness for efficient steel turning. Can the insert be used for interrupted cuts? Yes, the grade and geometry suit continuous to slightly interrupted cuts; for heavy interruption, consider a tougher geometry or alternative chipbreaker. Which holders are compatible with this insert? Compatibility follows ISO specifications — form, clearance angle, tolerance class, fastening, size and thickness determine fit; use an ISO‑compliant turning holder designed for trigon inserts. What is the function of the TS chipbreaker? The TS chipbreaker is tailored for chip control in medium‑steel turning, improving evacuation and reducing risk of built‑up edge under recommended cutting conditions. How does the 0.8 mm corner radius affect results? A 0.8 mm radius offers a balance between edge strength and surface finish, supporting stable machining and longer edge life in general turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080408 T9215 Wendeplatten - Tungaloy
WNMG 080408 T9215 Drehen — Tungaloy Die WNMG 080408 T9215 ist eine ISO-genormte Trigon-Wendeplatte für präzises Außen- und Innendrehen in der mittleren Stahlbearbeitung CVD-beschichtetes Hartmetall für mittlere Stahlbearbeitung Trigon-Platte mit zylindrischem Loch und 0° Freiwinkel Eckenradius 0,8 mm für präzise Schnittführung Plattendicke 4,76 mm, ISO-genormt kompatibel PM-Spanbrecher optimiert für kontinuierlichen Schnitt Produktivität und Wirtschaftlichkeit steigern Die WNMG 080408 T9215 verbindet robuste Geometrie mit einem Schneidstoff, der auf produktive Serienzerspanung ausgelegt ist. Durch die Kombination aus CVD-beschichtetes Hartmetall und dem PM-Spanbrecher wird eine gleichmäßige Spanbildung erreicht, die Ausschuss reduziert und die Werkzeugstandzeiten verlängert. Das führt zu höherer Ausbringung bei konstanten Prozessparametern und macht die Platte besonders geeignet für Fertigungsbetriebe, die Effizienz und Reproduzierbarkeit benötigen. Beschichtung, Material und Standzeit Die Sorte T9215 steht für eine CVD-basierte Beschichtung, die den Verschleißwiderstand und die thermische Stabilität verbessert. CVD-beschichtetes Hartmetall bietet eine harte, haftfeste Schicht, die beim Drehen von Stahl die Schneidkante schützt und so die Lebensdauer erhöht. Für Anwender, die wenig mit Beschichtungsprozessen vertraut sind: CVD ist ein Verfahren zur Abscheidung dünner Schichten, das hohe Haftung und gleichmäßige Deckung ermöglicht, ohne die Grundsubstrat-Eigenschaften zu kompromittieren. Passgenauigkeit und typische Einsatzfelder Die Platte eignet sich primär für Außen- und Innendrehen bei kontinuierlichem bis leicht unterbrochenem Schnitt. Die Kompatibilität zum Halter richtet sich nach Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke; diese Angaben müssen bei der Auswahl des Außenhalters bzw. der Bohrstange geprüft werden. Die trigonale Plattenform ermöglicht mehrere Schneidkanten pro Platte, reduziert Werkzeugwechselzeiten und erhöht den Nutzen bei wiederholten Serienläufen. Schnittgeometrie, Montage und Prozesssicherheit Der Eckenradius 0,8 mm unterstützt eine stabile Schnittführung und trägt zu vorhersehbarer Kantenausbildung bei. Die Platte verfügt über ein zylindrisches Loch zur sicheren Befestigung; die Plattendicke von 4,76 mm sorgt für ausreichende Steifigkeit in anspruchsvollen Bearbeitungssituationen. Der angegebene Freiwinkel 0° beeinflusst die Einstellwinkel und die Schnittgeometrie; bei der Werkzeugauslegung empfiehlt sich die Abstimmung von Schnittdaten und Haltergeometrie, um optimale Oberflächengüten und Standzeiten zu erzielen. Empfehlung: Für produktive und zuverlässige Stahlzerspanung die Sorte T9215 von Tungaloy wählen; bei Unklarheiten zu Halterkompatibilität oder Schnittdaten steht die technische Beratung von Metav Werkzeuge zur Verfügung — 📧 info@metav-werkzeuge.com | ☎️ +49 2822 7131930 Produktmerkmale Artikelnummer: 6796102 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: WNMG080408-PM T9215 Hersteller SKU: TUN6796102 Daten Eckenradius: 0,8 mm Plattendicke: 4,76 mm Plattengröße: 08 Winkel: 80° Freiwinkel: 0° Besonderheiten Material: Hartmetall Beschichtung: T9215 — CVD-beschichtung, hoher Verschleißwiderstand Spanbrecher: PM — Spanformer für mittleren Schnitt Plattenform: Trigon Loch: mit Loch, zylindrisches Loch Einsatz: Außen- und Innendrehen Kompatibilität: über Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke prüfen FAQ Für welche Werkstoffe ist die WNMG 080408 T9215 besonders geeignet? Die WNMG 080408 T9215 von Tungaloy ist speziell für die mittlere Stahlbearbeitung konzipiert; die CVD-beschichtung T9215 bietet dafür guten Verschleißschutz und Bruchsicherheit. Welche Vorteile bietet der PM-Spanbrecher? Der PM-Spanbrecher sorgt für kontrollierte Spanbildung bei kontinuierlichem bis leicht unterbrochenem Schnitt und trägt so zur Standzeitverbesserung und Prozessstabilität bei. Wie wirkt sich der Eckenradius 0,8 mm auf das Ergebnis aus? Ein Eckenradius von 0,8 mm erhöht die Schnittstabilität und unterstützt gleichmäßige Kantenausbildung, was zu besseren Oberflächengüten und voraussagbaren Spanbedingungen führt. Worauf ist bei der Halterwahl zu achten? Die Kompatibilität hängt von Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke ab; für sichere Montage die Angaben der Halterhersteller mit den Plattenmaßen abgleichen. Ist die Wendeplatte für unterbrochene Schnitte geeignet? Die Sorte T9215 ist ausgelegt für kontinuierliche bis leicht unterbrochene Schnitte; bei stark unterbrochenen Bedingungen sind speziell robuste Sorten oder Geometrien zu prüfen. für de-DE: Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG 080408 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, fracture-safe edge security, and ISO compatibility for reliable, productive turning operations; order the inserts via Metav Werkzeuge or consult our specialists for application advice. WNMG080408-FW T9215 — ISO turning insert WNMG 080408 T9215 for medium steel, CVD-coated carbide by Tungaloy The WNMG080408-FW T9215 is an ISO-standard turning insert optimised for external and internal turning, offering a balanced mix of wear resistance and edge robustness for continuous to lightly interrupted cuts. CVD-coated carbide T9215 for high wear resistance Designed for medium steel machining Trigonal WNMG form with 0.8 mm radius Suitable for continuous to light interrupted cuts Boosted productivity through a hard-wearing grade The core advantage of this insert lies in the T9215 CVD-coated carbide grade, which combines elevated wear resistance with reliable fracture safety. For machining medium-strength steels, this translates into longer effective tool life and fewer indexings, which reduces downtime and increases parts-per-shift. The grade is formulated for continuous to slightly interrupted cuts, so production runs and longer turning cycles benefit from consistent material removal rates and predictable tool behaviour. Geometry that ensures compatibility and repeatability The trigon (WNMG) geometry with a 0.8 mm corner radius and an 80° approach angle provides a versatile cutting edge suitable for a wide range of turning operations. The 0° clearance ensures stable contact conditions with the workpiece while the standard ISO sizing guarantees interchangeability with holders that match form, clearance, tolerance class, fastening and thickness. This predictable geometry supports repeatable part quality and simplifies tool inventory management on the shop floor. Coating and substrate explained for informed tooling decisions A CVD coating on a carbide substrate offers a robust surface layer that resists abrasive wear and maintains edge strength under thermal load. Compared with uncoated grades, the CVD-coated insert performs better where higher cutting temperatures occur, enabling higher cutting speeds or extended cutting lengths before tool change. The carbide substrate beneath the coating preserves fracture resistance, making this insert a pragmatic choice when machining steels that may present mixed cutting conditions. Practical application guidance and handling benefits When selecting an insert and chipbreaker, match the FW chipformer and the T9215 grade to workpiece material, part rigidity and machining stability for best results. The insert is supplied with a cylindrical central hole for positive clamping and a plate thickness of 4.76 mm, which contributes to secure seating in compatible holders. For routine maintenance, inspect the cutting edge for wear progression rather than chipping; this grade is engineered to indicate wear early, supporting predictive tool changes and steady production quality. For tailored setups or uncertain material conditions, the supplier can recommend matching holders and fastening hardware. Contact Metav Werkzeuge for application-specific advice, sample testing and rapid delivery from stock — Metav Werkzeuge is available by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6772378 SKU: 6772378-Tungaloy Manufacturer SKU: TUN6772378 Model series: ISO turning inserts Material: carbide Numbers / Core technical data Corner radius: 0.8 mm Plate thickness: 4.76 mm Approach angle: 80° Clearance angle: 0° Size: 08 ISO designation: 080408 Designs / Special features Geometry: trigon (WNMG) Chipbreaker: FW Grade/coating: T9215, CVD-coated carbide Central hole: cylindrical hole for fastening Typical application: turning (external and internal) FAQ What materials is the WNMG080408-FW T9215 best suited for? The WNMG080408-FW T9215 insert is optimised for medium-strength steels, delivering a balance of wear resistance and fracture safety for turning applications. How does the T9215 grade perform under interrupted cuts? The T9215 grade is formulated for continuous to light interrupted cuts; it tolerates minor interruptions while maintaining edge stability and good tool life. What is the significance of the 0.8 mm corner radius? A 0.8 mm corner radius provides a compromise between edge strength and finish quality, improving edge robustness while allowing acceptable surface finish in general turning operations. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO dimensions (080408) and the trigon WNMG shape; compatibility depends on holder form, clearance, tolerance class, fastening method and plate thickness. What fastening method does this insert use? The insert features a cylindrical central hole for positive clamping in appropriately designed holders and clamping sets. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080408 T9215 Wendeplatten - Tungaloy
WNMG 080408 T9215 Wendeplatte für Drehen von Tungaloy Die WNMG 080408 T9215 ist eine ISO-genormte Drehwendeschneidplatte, entwickelt für produktives Außen- und Innendrehen bei mittleren Stahlwerkstoffen Hohe Verschleißfestigkeit durch CVD-beschichtetes Hartmetall Zuverlässige Spanformung mit THS-Spanbrecher ISO-genormte Passform für kompatible Halter Eckenradius 0,8 mm für präzise Konturen Mit zylindrischem Loch für sichere Befestigung Produktivität steigern mit robuster Schnittlösung Die Kombination aus CVD-beschichtetem Hartmetall und der Sorte T9215 sorgt für deutlich verbesserte Verschleißfestigkeit und Bruchsicherheit bei mittlerer Stahlbearbeitung. Durch die hohe Belastbarkeit der Schneidkante lassen sich Schnittwerte anheben, wodurch die Produktivität in der Serienfertigung steigt. Die Wendeplatte ist auf kontinuierliche bis leicht unterbrochene Schnitte ausgelegt und reduziert damit Werkzeugwechsel und Stillstandzeiten. Präzise Konturen und sichere Spanbeherrschung Der integrierte THS-Spanbrecher kombiniert mit einem Eckenradius von 0,8 mm ermöglicht saubere Spanabfuhr und konstante Oberflächengüte selbst bei variierenden Zustellungen. Der 0° Freiwinkel bietet zusätzliche Stabilität an der Schneidkante, was sich besonders bei anspruchsvollen Außen- und Innendrehoperationen bezahlt macht. Anwender profitieren von reproduzierbaren Ergebnissen und gesteigerter Prozesssicherheit. Einfache Integration, wirtschaftlicher Einsatz Die ISO-Normierung gewährleistet Kompatibilität zu gängigen Außenhaltern, Bohrstangen und Klemmsätzen; so lässt sich die Wendeplatte ohne aufwändige Anpassungen in bestehende Werkzeugplatten wechseln. Die WNMG080408-THS reduziert Nebenzeiten durch standardisierte Befestigung und trägt zu einem wirtschaftlichen Zerspanprozess bei. Für Fragen zur Auswahl des passenden Spanbrechers oder zur Schnittdatenoptimierung steht die technische Beratung zur Verfügung. Empfehlung: Für stabile Serienprozesse die Tungaloy-Wendeplatte nutzen und bei Bedarf die Anwendung mit unserem Team abstimmen — Kontakt: info@metav-werkzeuge.com, Telefon: +49 2822 7131930 Produktmerkmale Artikelnummer: 6774119 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Hersteller SKU: TUN6774119 Fakten Eckenradius: 0,8 mm Winkel: 80° Freiwinkel: 0° Plattendicke: 4,76 mm Plattengröße: 08 Besonderheiten Material: Hartmetall Schneidstoff: CVD-beschichtetes Hartmetall Sorte: T9215 Spanbrecher: THS Loch: mit Loch (zylindrisches Loch) Plattenform: trigon Anwendung: Drehen Modellserie: ISO-Drehwendeschneidplatten FAQ Welche Werkstoffe lassen sich mit dieser Wendeplatte bearbeiten? Die WNMG 080408 T9215 von Tungaloy ist besonders für mittlere Stahlarten ausgelegt und bietet gute Performance bei kontinuierlichen bis leicht unterbrochenen Schnitten. Wie beeinflusst die Sorte T9215 die Standzeit? Die Sorte T9215 kombiniert hohe Verschleißfestigkeit mit Bruchsicherheit, was in vielen Anwendungen zu längeren Standzeiten und stabileren Prozessbedingungen führt. Passt die Platte in alle gängigen Halter? Da es sich um eine ISO-genormte Drehwendeschneidplatte handelt, ist die Kompatibilität zu Haltern üblich; Form, Freiwinkel, Befestigung, Größe und Dicke müssen jedoch geprüft werden. Für welche Schnittbedingungen ist der THS-Spanbrecher geeignet? Der THS-Spanbrecher ist für mittlere Schnittbedingungen konzipiert und bietet zuverlässige Spanformung sowie konstante Oberflächengüten. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com