CCMT 120408 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide (T9215) for enhanced wear resistance and a CCMT120408 rhombic geometry with 0.8 mm nose radius for stable cutting performance in medium-steel turning; order directly via Metav Werkzeuge or request technical advice if required. CCMT120408 T9215 turning insert – Tungaloy The CCMT120408 T9215 is an ISO-format turning indexable insert engineered for external and internal turning of medium steels, offering a balance of wear resistance and fracture toughness. CVD-coated carbide (T9215) for high wear resistance ISO CCMT120408 rhombic insert with 0.8 mm nose radius Designed for medium-steel turning and reliable productivity Product grade that raises throughput in medium-steel turning The CVD-coated carbide grade T9215 delivers a hard, wear-resistant surface while maintaining core toughness, making it well suited for continuous to light interrupted cuts in medium-steel applications. As a CVD-coated substrate, the grade reduces flank and crater wear under typical turning feeds and speeds, which translates into longer tool life and less frequent index changes. For production-focused workshops, this means fewer tool interventions and more consistent cycle times—quality and economy combined. Geometry and clamping that enhances stability and repeatability The ISO CCMT120408 geometry denotes a standard rhombic shape with an included angle that supports a wide range of toolholder pockets. The insert’s 0.8 mm nose radius gives a predictable cutting edge for improved surface finish without overloading the tool, while the 7° clearance angle assists chip evacuation and reduces rubbing. The insert features a cylindrical hole with a one-sided countersink (40°–60°) for secure clamping in compatible holders. Compatibility to a holder is determined by form, clearance angle, tolerance class, fastening method, size and thickness, so matching pocket design and clamping hardware is essential for optimal performance. Practical selection and machining advantages A single-sided chipbreaker in this indexable insert guides chips for controlled evacuation and reduced tool pressure peaks, which supports steady cutting and consistent surface quality. When paired with a correctly matched holder and clamping set, the grade and chip geometry minimise vibration and risk of edge chipping, particularly under slightly interrupted cuts. For operations seeking reproducible results, choosing this insert helps secure stable material removal rates and predictable tool-change intervals—advantages that improve overall process reliability and part quality. Contact Metav Werkzeuge for application advice on Tungaloy inserts, availability and fast delivery at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6773991 Manufacturer SKU: TUN6773991 Merchant SKU: 6773991-Tungaloy Label: CCMT120408 T9215 Tungaloy-Wendeplatte Facts ISO designation: 120408 Insert form: CCMT (rhombic) Nose radius: 0.8 mm Clearance angle: 7° Plate thickness: 4.76 mm Plate size: 12 mm Included angle: 80° Special features Coating: CVD-coated Grade: T9215 Material: carbide Chipbreaker: single-sided Hole: cylindrical hole with one-sided countersink (40°–60°) Typical application: external and internal turning of medium steels System components: ISO insert, compatible external holder or boring bar, shim/clamping set and replacement screws FAQ What materials is this insert suitable for? The CCMT120408 T9215 insert from Tungaloy is optimised for medium-steel machining and combines wear resistance with toughness for continuous to light interrupted cuts. Which toolholders fit the CCMT120408 geometry? Holders designed for ISO CCMT inserts with matching form, clearance angle, tolerance class, fastening method, size and thickness will accept this insert; check the holder pocket and clamping method before mounting. How does the T9215 coating affect tool life? The CVD-coated T9215 grade enhances wear resistance and reduces flank and crater wear on the carbide substrate, resulting in longer tool life under appropriate cutting parameters. Can this insert be used for finishing passes? Yes—thanks to the 0.8 mm nose radius and rhombic geometry, the insert provides a consistent surface finish when cutting conditions and holder rigidity are suitable. What role does the chipbreaker play for this insert? The single-sided chipbreaker controls chip formation and evacuation, lowering cutting forces and helping to maintain stability and predictable tool performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 120408 T9215 Wendeplatten - Tungaloy
Benefit from a blend of CVD-coated carbide T9215, a 0.8 mm corner radius and a 7° relief angle that together deliver productive, wear-resistant performance for medium-steel turning; order directly via Metav Werkzeuge or consult our specialists for application guidance. CCMT120408 T9215 CCMT 120408 T9215 — Turning insert, rhombic 12×4.76 mm by Tungaloy A CCMT120408 T9215 indexable turning insert engineered for medium steel applications, suitable for both external and internal turning in continuous to lightly interrupted cut conditions. CVD-coated carbide grade T9215 for steel Rhombic ISO CCMT120408 form, 12×4.76 mm 0.8 mm corner radius for robust edge life Suitable for external and internal turning High wear resistance for productive medium-steel machining The CVD-coated carbide composition of this insert (grade T9215) combines a protective ceramic layer with a tough substrate to increase wear resistance while maintaining breakage safety. This balance enables stable cutting in medium-steel applications and supports higher metal removal rates without frequent index changes. The single-sided chipbreaker promotes controlled chip formation, reducing the risk of entanglement and improving surface finish consistency. The result is measurable productivity gains and fewer unplanned tool changes in series production. Secure seating and ISO compatibility for predictable tool changes Designed to the ISO indexable insert family, the geometry and dimensions ensure compatibility with standard holders when form, relief angle, tolerance class, clamping method, size and thickness match. The rhombic plate shape and 80° seating angle combine with the cylindrical hole and single-side countersink (40°–60°) to deliver repeatable mounting and secure clamping. This repeatability reduces setup variance and contributes to process stability, making changeovers faster and reducing downtime in multi-shift operations. Edge strength and machining stability for demanding operations A 0.8 mm corner radius gives enhanced edge robustness for moderate depth cuts and aids resistance to edge chipping under variable loads. The modest 7° relief angle limits flank rubbing while keeping a positive cutting action for smoother engagement. With a plate thickness of 4.76 mm and a nominal size of 12 mm, the insert supports sufficient stiffness for routine turning tasks while the T9215 composition helps resist abrasive wear. Together, these characteristics yield consistent part quality and a reliable cutting edge life under continuous and slightly interrupted cutting regimes. Contact Metav Werkzeuge for stock availability and tailored application advice on Tungaloy CVD-coated carbide inserts — info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: 6774050 Manufacturer SKU: TUN6774050 SKU: 6774050-Tungaloy Name: CCMT120408 T9215 Tungaloy insert Facts Corner radius: 0.8 mm Size: 12 mm Thickness: 4.76 mm Relief angle: 7° Seat angle: 80° Hole style: with hole — cylindrical hole + single-side countersink (40°–60°) Special features Material: carbide Coating: CVD-coated Grade: T9215 Chipbreaker: one-sided Application: external and internal turning on medium steel ISO form: CCMT120408 FAQ What materials is this insert intended for? This insert is specified for medium steel applications; the T9215 grade and CVD-coated carbide construction provide wear resistance and fracture safety for steel turning. Can the insert handle interrupted cuts? Yes, the insert is suitable for continuous to lightly interrupted cutting; the 0.8 mm corner radius and robust carbide substrate improve resistance to impact in such conditions. Which holder features are required for proper compatibility? Compatibility depends on matching the ISO form, relief angle, tolerance class, clamping method, size and thickness; the CCMT120408 shape, 7° relief and 4.76 mm thickness must be matched by the holder. How does the chip control perform on this grade? The single-sided chipbreaker on the CCMT120408 with T9215 provides consistent chip formation and evacuation for medium-steel turning, aiding surface finish and tool life. Is this an original Tungaloy article and where is it referenced? The insert is an original Tungaloy turning insert listed under manufacturer article number 6774050 and manufacturer SKU TUN6774050. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 120408 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide grade T9215, robust 0.8 mm corner radius and ISO conformity for a stable, productive turning process; order the CCMT120408 T9215 insert directly via Metav Werkzeuge or consult our advisors for application support. CCMT 120408 T9215 turning insert – ISO indexable insert by Tungaloy CCMT120408 T9215 is an ISO-standard indexable insert designed for productive external and internal turning of medium steel materials. CVD-coated carbide grade T9215 0.8 mm corner radius for edge strength 80° rhombic form with 7° relief angle Cylindrical hole with 40°–60° countersink Consistent wear resistance for medium-steel turning The insert is manufactured in CVD-coated carbide, grade T9215, which delivers a balance of wear resistance and fracture toughness. This combination makes the tool particularly suitable for medium steel machining under continuous to slightly interrupted cutting conditions, improving run time between indexings. The coating reduces adhesion and flank wear while the carbide substrate maintains cutting-edge stability, so production runs can sustain higher productivity with fewer unplanned interruptions. Geometry that simplifies holder compatibility and clamping Defined by ISO form and dimensions, the rhombic 80° geometry and 7° relief angle ensure predictable seating in compatible toolholders. Compatibility is established by form, relief angle, tolerance class, fastening method, size and thickness; the insert’s rhombic shape and 4.76 mm thickness allow integration into common external holders and boring bars. The cylindrical hole with a single-sided countersink supports secure clamping and straightforward replacement, reducing setup time and risk of misalignment. Edge protection and chip control for production environments The 0.8 mm corner radius increases edge strength and reduces chipping during slightly interrupted cuts, while the one-sided chipbreaker assists consistent chip formation and evacuation on turning operations. These features together enhance surface finish and process reliability, translating to lower rework rates and more predictable tool life. In practice, the indexable insert forms part of a system comprising a matching holder, shim and clamping set plus replacement screws for efficient maintenance cycles. Practical benefits for workshop use and process planning As an ISO-standard insert, this product supports inventory rationalisation and easy replacement across multiple machines. The CVD coating and carbide construction afford longer service life in demanding batches, helping to lower total machining costs through fewer tool changes. For operations seeking reproducible results, the insert’s geometry and grade make it straightforward to specify cutting data and tolerances, while the standardised format aids cross-platform planning and tool management. For high-productivity turning with reliable wear resistance, request the Tungaloy CCMT120408 T9215 insert via Metav Werkzeuge or contact our technical consultants at info@metav-werkzeuge.com / +49 2822 7131930 for tailored application advice and availability Technical Data Article number: 6772436 SKU: 6772436-Tungaloy Manufacturer SKU: TUN6772436 Label: CCMT120408 T9215 Tungaloy-Wendeplatte Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Numbers / Core Data Size: 12 Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 7° Included angle: 80° Special features / Versions Shape: rhombic Hole: mit Loch Hole style: cylindrical hole + single-sided countersink (40°–60°) Grade: T9215 (CVD-coated carbide) Chipbreaker: one-sided Application: Drehen Compatibility determined by form, relief angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suited for? The CCMT120408 T9215 indexable insert is optimised for medium steel machining; the T9215 grade provides a blend of wear resistance and toughness suitable for continuous to slightly interrupted turning operations. How does the chipbreaker affect performance? The one-sided chipbreaker on this insert promotes controlled chip formation and evacuation during turning, improving surface finish and reducing the likelihood of recutting long chips in production cycles. Which holder features are required for compatibility? Compatibility depends on holder form, relief angle, tolerance class, fastening method, size and thickness; ensure the toolholder accepts an ISO CCMT 120408 rhombic insert with the specified 7° relief and 4.76 mm thickness. Is the insert good for interrupted cuts? Yes—the carbide substrate combined with the 0.8 mm corner radius and CVD coating enhances fracture resistance and wear performance in continuous to slightly interrupted cutting situations. What is the manufacturer SKU and article number for ordering? The manufacturer SKU is TUN6772436 and the article number is 6772436 for the Tungaloy CCMT120408 T9215 turning insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 120408 T9225 Wendeplatten - Tungaloy
Take advantage of a robust, CVD-coated T9225 grade combined with the ISO CCMT geometry for reliable medium to heavy steel turning; the insert’s 0.8 mm corner radius and single-sided chipbreaker provide secure performance under variable engagement conditions. Order the insert via Metav Werkzeuge or contact the consultants for application support. CCMT120408 T9225 — ISO turning insert for medium to heavy steel machining, Tungaloy CCMT120408 T9225 Tungaloy turning insert for ISO-compliant external and internal turning applications, designed for variable engagement and interrupted cuts CVD-coated carbide T9225 for steel machining Rhombic CCMT 120408 geometry 0.8 mm corner radius for robust cuts Single-sided chipbreaker for interrupted cuts Productivity through a wear-resistant grade The CVD-coated carbide T9225 is engineered as a universal, robust grade for the demands of medium to heavy steel machining. Its surface treatment increases wear resistance and keeps cutting edges stable across varying engagement conditions, which translates into longer tool life and fewer insert changes. This reliability supports higher productivity and reduces process interruptions, making it a sound choice where consistent removal rates and dependable edge behaviour are required. Geometry and clamping for stable, repeatable results The rhombic CCMT 120408 geometry with an 80° included angle and a 7° relief enables versatile approach angles while maintaining tool strength. The insert’s design, including the cylindrical hole with a one-sided countersink (40°–60°) and a 4.76 mm thickness, ensures secure clamping in compatible holders. These features reduce vibration and promote repeatable accuracy, so setups stay stable and workpiece tolerance compliance becomes easier to achieve in serial production. Better chip control and economical edge life Equipped with a single-sided chipbreaker and a 0.8 mm corner radius, the insert improves chip formation in interrupted and semi-stable cuts. The chipbreaker helps direct swarf away from the cutting zone, lowering recut risk and heat build-up. Combined with the T9225 grade’s toughness, this results in improved edge life and lower tooling cost per part — a tangible economic benefit for workshops focusing on throughput and consistent surface finishes. System compatibility and selection guidance The insert follows ISO standard dimensions, so compatibility with a suitable external holder, boring bar or support set is determined by shape, relief angle, tolerance class, fastening style, size and thickness. When selecting a combination, match the chipbreaker and grade to the workpiece material and machine stability. For interrupted cuts or unstable clamping, choose the T9225 grade and a robust holder to exploit the insert’s toughness; for finishing passes, consider smaller engagement and adjust feeds accordingly for improved surface quality. If assistance is needed to match holder type or cutting parameters, technical guidance is available. For specific application advice or to secure supply of the Tungaloy CCMT120408 T9225 insert, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 — consultants are available to recommend holders and parameters for best results. Technical data Manufacturer article number: 6781116 SKU: 6781116-Tungaloy Manufacturer SKU: TUN6781116 Model series: ISO turning inserts Designation: CCMT120408 T9225 Numbers / Core technical data Size (inscribed circle): 12 Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 7° Included angle: 80° ISO code: 120408 Special features Material: carbide Coating: CVD Chipbreaker: single-sided Plate form: rhombic Hole style: cylindrical hole + one-sided countersink (40°–60°) Application: turning (external and internal) Grade: T9225, universal for medium to heavy steel machining FAQ What materials is this insert suitable for? The CCMT120408 T9225 insert is specified for medium to heavy steel machining; the T9225 grade provides toughness for variable engagement and lightly interrupted cuts. Does the insert fit standard CCMT toolholders? Yes, the insert follows ISO CCMT dimensions; compatibility with a holder depends on form, relief angle, tolerance class, fastening and plate thickness. How does the chipbreaker affect machining? The single-sided chipbreaker on this insert improves chip control in interrupted and semi-stable cuts, lowering recut risk and helping to maintain consistent surface finishes. What benefit does the 0.8 mm corner radius bring? A 0.8 mm corner radius increases edge robustness for heavier cuts and improves edge life under varying engagement compared with finer radii. Is the Tungaloy grade suitable for automated production? The T9225 grade’s balance of wear resistance and toughness makes it reliable for automated and serial production where predictable tool life and consistent results are required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 120408 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of proven T9225 CVD-coated carbide toughness, ISO compatibility and a compact 0.8 mm corner radius for stable medium-to-heavy turning operations; order directly via Metav Werkzeuge or consult the team for application-specific advice. CCMT 120408 T9225 indexable insert for turning — Tungaloy The CCMT120408 T9225 is an ISO‑standard indexable insert designed for turning applications, offering a robust universal grade and chip control for medium to heavy steel machining. CCMT120408 rhombic insert, 80° cutting angle T9225 CVD-coated carbide for medium–heavy steel 0.8 mm corner radius for reduced vibration Single-sided chipbreaker with cylindrical hole High-performance turning under variable conditions The CVD-coated carbide grade T9225 delivers a balanced combination of wear resistance and toughness suitable for medium to heavy steel machining, where interrupted cuts or changing engagement demand material resilience. As an indexable insert, it converts higher edge life into fewer tool changes and more productive cycles; the robust grade supports stable chip formation and predictable flank wear, which in turn reduces unplanned stoppages and contributes to a smoother production flow. The result is consistent part quality and improved process efficiency in both external and internal turning. Secure clamping, rigid geometry and operational stability Designed to the ISO insert standard, the plate form and fixing are decisive for holder compatibility: the fit depends on plate shape, relief angle, tolerance class, fixing method, size and thickness. The CCMT geometry with an 80° approach angle and a 7° clearance angle provides cutting stability and directional strength, while the 4.76 mm thickness increases resistance to bending and vibration. The cylindrical hole with a one‑sided countersink (40°–60°) ensures reliable clamping in compatible holders and supports repeatable positioning when rotating to a fresh cutting edge. Practical advantages and selection guidance for machinists The combination of a single-sided chipbreaker and rhombic shape offers versatility across common turning tasks while the 0.8 mm corner radius helps dampen chattering on less rigid set-ups. When selecting an insert grade and chipbreaker, prioritise workpiece material and cutting stability: the T9225 grade is a versatile choice for varying steel conditions and slightly interrupted cuts, translating into longer tool life and fewer interventions. For optimum results, pair the insert with a matched external holder or boring bar chosen for the plate form and thickness, and select cutting parameters that favour consistent chip evacuation and stable clamping. For reliable medium-to-heavy turning with Tungaloy's T9225 toughness, contact Metav Werkzeuge for tailored recommendations and ordering: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6781221 Manufacturer SKU: TUN6781221 SKU: 6781221-Tungaloy Designation: CCMT120408 Material: carbide Series: ISO indexable turning inserts Key figures Corner radius: 0.8 mm Thickness: 4.76 mm Size (inscribed circle): 12 mm Clearance angle: 7° Cutting angle: 80° Special features CVD‑coated carbide, grade T9225 Robust universal grade for medium to heavy steel Rhombic plate form (CCMT) Single-sided chipbreaker With cylindrical hole and one-sided countersink (40°–60°) ISO compatibility; fit determined by form, relief angle, tolerance class, fixation, size and thickness FAQ Which materials is this insert intended for? The CCMT120408 T9225 indexable insert is engineered primarily for medium to heavy steel machining; the T9225 grade offers the toughness required for varying engagement and lightly interrupted cuts. How does the hole and countersink design affect clamping? The cylindrical hole combined with a one‑sided countersink (40°–60°) provides secure, repeatable clamping in compatible holders and helps maintain correct seating under cutting loads for the CCMT120408 insert. What does the T9225 designation mean in practice? T9225 denotes a CVD‑coated carbide grade optimised for balanced wear resistance and toughness, offering dependable tool life and stable chip formation in demanding turning tasks. Can this insert be used for internal turning as well as external turning? Yes; the geometry and chipbreaker of the insert suit both external and internal turning, though holder selection and rigidity should be adapted to the specific operation to maintain stability. How should the corner radius and thickness influence process settings? A 0.8 mm corner radius reduces sensitivity to vibration compared with smaller radii, and the 4.76 mm plate thickness increases rigidity—both factors permitting slightly higher feed rates and improved edge life when the machine set-up is sufficiently rigid. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 120408 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide cutting edge and the T9225 universal grade to ensure stable cutting in medium to heavy steel turning; the ISO conformity and defined geometry enable straightforward holder selection and fast indexable replacement. Order the insert directly via Metav Werkzeuge or request bespoke selection advice from their consultants. CCMT120408 T9225 — ISO indexable turning insert for turning by Tungaloy A CCMT120408 T9225 indexable insert designed for medium to heavy steel turning, offering robust cutting performance for interrupted cuts and variable engagement conditions. CVD-coated carbide for robust performance Universal T9225 grade for medium to heavy steel Rhombic CCMT form with 80° included angle 0.8 mm nose radius and 4.76 mm thickness Stable cutting for medium to heavy steel turning The CVD-coated carbide body in the T9225 grade provides a balance of toughness and wear resistance that is advantageous when machining steels under varying engagement conditions. As an indexable insert, it is intended to deliver consistent cutting behaviour during both continuous and lightly interrupted cuts, reducing the frequency of tool changes. The result is improved process stability and predictable surface quality when the tool is used in the appropriate application range. Clear compatibility and effortless toolset planning Manufactured to ISO dimensions and tolerances, the insert’s compatibility with holders depends on its geometry, 7° clearance, tolerance class, fixing method, size and thickness. This standardisation simplifies holder selection and inventory management: matching a rhombic CCMT insert to a corresponding external holder or boring bar ensures correct seating and clamping, which in turn secures repeatable cutting conditions and shorter setup times on the shop floor. Controlled chips and prolonged tool life The single-sided chipbreaker geometry supports reliable chip control when turning a wide range of steels. The chemical vapour deposition layer (CVD) on the carbide increases surface hardness and thermal resistance, which helps to maintain edge stability at elevated cutting speeds and prolongs tool life. For operators less familiar with coatings: CVD is a thin, hard layer applied in a controlled process that enhances wear resistance without significantly reducing substrate toughness. Practical benefits for daily workshop use The rhombic form with an 80° included angle and a 0.8 mm nose radius provides a versatile compromise between strength and surface finish, making the insert suitable for both external and internal turning tasks. Integration into a system is straightforward — insert, suitable external holder or boring bar, shim/clamp set and replacement screws — enabling fast replacement and minimal downtime. For specification assistance or to confirm suitability for a specific steel grade or turning strategy, Metav Werkzeuge can provide technical guidance. For robust, versatile steel turning choose Tungaloy’s T9225 grade — contact Metav Werkzeuge for tailored advice and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6781206 Manufacturer SKU: TUN6781206 Brand: Tungaloy Model series: ISO indexable turning inserts Type designation: CCMT120408 T9225 Application: Turning Material: Carbide Facts Insert size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 7° Included angle: 80° Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Special features Grade: T9225, universal for medium to heavy steel Cutting material/coating: CVD-coated carbide Plate form: rhombic (CCMT) Chipbreaker: single-sided Typical system: insert + external holder/boring bar + shim/clamp set + spare screws Suited for interrupted cuts and variable engagement conditions FAQ What steels is this insert suitable for? The CCMT120408 T9225 insert is engineered as a universal grade for medium to heavy steel machining and performs well under varying engagement conditions. How is the insert fixed to a holder? The insert is mounted in ISO-compatible holders; correct selection depends on the insert form, fixing method, tolerance class, size and thickness. What benefit does the CVD coating provide? The CVD coating increases surface hardness and thermal resistance, improving wear behaviour and supporting consistent performance at higher cutting speeds. Can the insert be used for interrupted cuts? Yes, the T9225 grade and robust geometry are chosen to cope with lightly interrupted cuts and fluctuating cutting conditions. What does the 0.8 mm radius mean for finish and strength? A 0.8 mm nose radius balances edge strength and achievable surface finish, offering a compromise suitable for many general turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 120412 AH6225 Wendeplatten - Tungaloy
The combination of an ISO-standard rhombic geometry and a PVD-coated carbide grade AH6225 ensures consistent chip control and extended edge life in medium turning operations; order the CCMT 120412 AH6225 insert directly via Metav Werkzeuge or consult the technical team for process integration. CCMT 120412 AH6225 — ISO turning insert, PVD-coated carbide (Tungaloy) The CCMT 120412 AH6225 is a rhombic, ISO-standard turning insert designed for medium turning of rostfreier Stahl, providing a sharp yet robust cutting edge for variable production conditions. ISO rhombic insert CCMT 120412 PVD-coated carbide AH6225 for rostfreier Stahl 1.2 mm corner radius for reliable edge Cylindrical hole with 40°–60° countersink Consistent cutting performance for rostfreier Stahl and mixed batches The PVD-coated AH6225 grade delivers a balance between sharpness and toughness that suits interrupted cuts and the variable abrasiveness of rostfreier Stahl. The coating reduces adhesion and improves resistance to built-up edge, while the base carbide supports a stable cutting line under fluctuating conditions. For production environments where batches vary or tool change frequency affects throughput, this insert offers improved process stability and reduced rework, translating into fewer stoppages and a more predictable machining cadence. Mounting clarity and compatibility to simplify tool selection The insert conforms to ISO dimensions and features a cylindrical hole with a one-sided countersink (40°–60°), which makes it compatible with a wide range of external holders and boring bars. Compatibility is determined by insert form, relief angle, tolerance class, fastening and thickness; the standardised shape simplifies stocking and holder selection. Clear specification of the relief angle (7°) and included angle (80°) supports straightforward setup and reduces the risk of mismatched tool-holder geometry that can compromise surface finish or tool life. Geometry and chip control that support reliable productivity With a 1.2 mm corner radius and a single-sided chipbreaker, the insert promotes predictable chip formation and strength at the cutting edge. The rhombic form (CCMT) combines access to external and internal turning with favourable rake and clearance characteristics. For shops aiming to keep cycle times low while maintaining surface quality, the insert’s geometry helps achieve repeatable results with moderate cutting depths and feed rates. The PVD coating further enhances the edge integrity, extending usable life and lowering the frequency of index changes. Contact Metav Werkzeuge to discuss process parameters for the AH6225 grade or to request compatible holder recommendations for seamless integration into existing turning cells. Technical data Article number: 6903261-Tungaloy Manufacturer SKU: TUN6903261 Manufacturer article number: 6903261 Name: CCMT120412 AH6225 Tungaloy insert Core specifications Insert designation: CCMT120412 Grade: AH6225 Corner radius: 1.2 mm Thickness: 4.76 mm Size: 12 mm Relief angle: 7° Included angle: 80° Hole style: cylindrical hole + one-sided countersink (40°–60°) Design & features PVD-coated carbide Rhombic (CCMT) ISO geometry Single-sided chipbreaker ISO-standard turning insert Application: turning of rostfreier Stahl Compatibility depends on holder form, relief angle, tolerance, fastening, size and thickness FAQ What applications is this insert best suited for? The CCMT 120412 AH6225 insert is engineered for medium turning operations, in particular for rostfreier Stahl, offering a compromise between sharpness and edge stability for batch or variable machining. How does the AH6225 grade improve tool life on rostfreier Stahl? The PVD-coated AH6225 grade reduces adhesion and improves wear resistance; in the CCMT 120412 geometry this results in a more stable cutting edge and fewer index changes during interrupted or mixed-condition cutting. Which tool holders are compatible with this CCMT insert? Compatibility is determined by holder form, relief angle, tolerance class, fastening, size and thickness; holders designed for CCMT 120412 ISO inserts with a cylindrical hole and matching countersink will be suitable. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 120412 AH6225 Wendeplatten - Tungaloy
Take advantage of a versatile PVD-coated carbide grade that balances a sharp cutting edge with robustness for medium turning operations; the 1.2 mm corner radius and 80° approach angle provide stable cutting and reliable surface finish. Order directly via Metav Werkzeuge or consult our application specialists for holder compatibility and process advice. CCMT 120412 AH6225 Tungaloy turning insert — PVD-coated carbide, 1.2 mm radius CCMT 120412 AH6225 Tungaloy insert for general turning tasks, designed for external and internal operations in stainless steels with an ISO CCMT geometry and single-sided chipbreaker ISO CCMT geometry for universal turning PVD-coated carbide grade AH6225 1.2 mm corner radius for robust edges Cylindrical hole with single-sided countersink 7° clearance and 80° approach angle Consistent edge life for mixed stainless operations The combination of the AH6225 grade and the PVD coating delivers a balance between a sharp cutting edge and wear resistance, making the insert suited to fluctuating conditions often found when machining stainless steels. The coating reduces adhesive wear and improves edge stability, which leads to longer tool life and fewer insert changes. For shops facing varied batch sizes and intermittent interruptions, this translates into increased effective machining time and reduced tooling overhead, while maintaining a reliable surface finish. Secure clamping and straightforward holder matching Compatibility with toolholders is determined by the insert’s form, 7° clearance, tolerance class, fixation method, size (12 mm), thickness (4.76 mm) and hole geometry. The cylindrical hole with a single-sided countersink (40°–60°) ensures reproducible seating and secure clamping in standard CCMT-compatible holders. This predictable fit reduces vibrations and runout risk, improving part repeatability and making tool setup faster and more reliable on production floors. Defined geometry for stable cutting and chip control With an 80° approach angle and a 1.2 mm corner radius, the insert offers a compromise between edge strength and cutting sharpness, suitable for medium-depth cuts and finishing passes. The single-sided chipbreaker promotes controlled chip formation and evacuation during turning, reducing the likelihood of built-up edge and facilitating continuous production. For manufacturers aiming for consistent dimensional accuracy, this geometry supports improved surface integrity and process stability. Practical benefits in the workshop The ISO CCMT form factor allows easy replacement and inventory standardisation across different machines. The insert’s specification—PVD-coated carbide, AH6225 grade, 1.2 mm radius, size 12 and 4.76 mm thickness—makes it a sensible choice where versatility and process reliability are priorities. Where a sharp yet resilient cutting edge is required for rostfrei workpieces, the insert can reduce rework rates and contribute to predictable batch throughput. For tailored advice on applying this Tungaloy turning insert in a specific process, contact Metav Werkzeuge — phone +49 2822 7131930 or email info@metav-werkzeuge.com for expert guidance and recommended holder pairings Technical data Article number: 6903268 SKU: 6903268-Tungaloy Manufacturer SKU: TUN6903268 Model series: ISO turning insert series Facts ISO designation: CCMT120412 Grade: AH6225 Material: PVD-coated carbide Size: 12 Thickness: 4.76 mm Corner radius: 1.2 mm Clearance angle: 7° Approach angle: 80° Special features Hole: with hole Hole style: cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: single-sided Intended application: turning (external and internal) FAQ Which materials is this insert designed for? The CCMT 120412 AH6225 Tungaloy insert is formulated primarily for machining stainless steels and performs well under mixed-condition turning where edge stability is essential. How does the AH6225 grade benefit machining? AH6225 combines a sharp cutting edge with PVD-enhanced wear resistance, giving stable flank life and consistent results in medium turning applications with occasional interruptions. What ensures correct fit in a holder? Correct fit is achieved by matching the ISO CCMT geometry, size, thickness and the insert’s hole and countersink specification; the CCMT 120412 form and cylindrical hole with countersink provide secure seating. Can the insert be used for both external and internal turning? Yes, the geometry and chipbreaker design of this CCMT insert make it suitable for both external and internal turning tasks when paired with the appropriate holder. What surface finish improvements can be expected? The combination of 1.2 mm corner radius and 80° approach angle supports improved surface integrity compared with more aggressive geometries, helping to reduce subsequent finishing operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 120412 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide cutting edge, a 1.2 mm nose radius, and ISO compatibility for dependable stainless-steel turning; this insert delivers stable edge life and adaptable chip control. Order the insert directly via Metav Werkzeuge or consult our advisers for application-specific recommendations. CCMT 120412 AH6225 Tungaloy — ISO turning insert, PVD-coated carbide The CCMT 120412 AH6225 is an ISO-standard rhombic turning insert designed for external and internal turning, optimised for machining stainless steels under variable conditions PVD-coated carbide grade AH6225 Rhombic CCMT geometry, 80° included angle 1.2 mm nose radius for improved finish Cylindrical hole with single-side countersink Precise performance for stainless-steel turning The PVD-coated cemented carbide substrate in grade AH6225 offers a balance of sharpness and edge stability for medium machining. The insert’s rhombic CCMT geometry and 80° included angle make it suitable for a wide range of external and internal turning operations, while the 1.2 mm nose radius helps produce consistent surface quality without excessive cutting forces. The coating improves thermal and abrasive resistance, which supports longer tool life and reduced downtime in serial production. Reliable chip control and edge life under changing conditions Featuring a single-sided chipbreaker, the insert is tailored to control swarf formation when cutting stainless steels and similar alloys. The combination of the AH6225 grade and the PVD layer reduces edge wear during intermittent cuts and irregular feeds, delivering repeatable results over longer cycles. The moderate relief angle of 7° and the insert thickness of 4.76 mm contribute to mechanical stability, reducing vibration and helping maintain dimensional accuracy on turned components. System compatibility and practical setup guidance Compatibility with toolholders is governed by form, clearance angle, tolerance class, fixing method, size and thickness. The insert includes a cylindrical hole with a single-side countersink (40°–60°) to match common clamping systems; shims, clamping kits and replacement screws form the complete system. For workshops assessing holder fitment, check the insert’s ISO designation 120412, plate size (12 mm) and hole style against the holder specification. When paired with a suitable external holder or boring bar, this insert performs reliably in production and jobbing environments. For application advice or to secure CCMT 120412 AH6225 inserts from Tungaloy, contact Metav Werkzeuge for tailored recommendations and availability. Technical Data Article number: 6903265 Manufacturer SKU: TUN6903265 Merchant SKU: 6903265-Tungaloy Manufacturer: Tungaloy Facts Geometry: CCMT 120412 Nose radius: 1.2 mm Plate size: 12 mm Plate thickness: 4.76 mm Relief angle: 7° Included angle: 80° Fixing: with hole Hole style: cylindrical hole + single-side countersink (40°–60°) Special features Material: cemented carbide Coating: PVD Grade: AH6225 (universal for stainless steels) Chipbreaker: one-sided Plate shape: rhombic Typical application: external and internal turning System components: compatible holder, shim/clamping kit, replacement screws FAQ What materials is this insert best suited for? The CCMT 120412 AH6225 insert is formulated for machining stainless steels, offering a good balance between a sharp cutting edge and robustness for medium cutting conditions. How does the AH6225 grade affect tool life? The AH6225 grade with a PVD coating improves wear resistance and maintains a stable cutting edge during intermittent cuts, which typically extends effective tool life under varying production conditions. Which holder features are required for correct mounting? Correct mounting depends on holder form, clearance angle, tolerance class, fixing type, size and thickness; the insert’s cylindrical hole with countersink is compatible with standard ISO clamp systems when matched to the correct holder. What surface finish can be expected with a 1.2 mm radius? A 1.2 mm nose radius balances finish and strength: it supports a smoother surface at moderate feeds while maintaining edge stability compared with larger radii. Is this insert suitable for internal turning? Yes, the ISO CCMT geometry and robust construction make it suitable for both external and internal turning tasks when used with a compatible boring bar or internal holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 120412 AH6235 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide durability, a 1.2 mm corner radius for robust performance, and ISO compatibility for predictable tool changes; order via Metav Werkzeuge or contact the sales team for application advice. CCMT120412 AH6235 ISO turning insert — PVD-coated carbide, 1.2 mm radius (Tungaloy) The CCMT120412 AH6235 is an ISO-format turning insert engineered for external and internal turning, optimised for stainless steels and interrupted cuts where increased chip control and edge resistance are required ISO insert CCMT120412 geometry PVD-coated carbide AH6235 grade 1.2 mm corner radius for robust transitions Cylindrical hole with single-sided countersink High-performance wear resistance for demanding turning applications The PVD-coated grade AH6235 provides a tougher edge that resists chipping in applications with interrupted cuts and unstable machining conditions. As a PVD-coated carbide insert, it combines a hard, wear-resistant surface with a core substrate that absorbs mechanical shock; this balance reduces flank and crater wear, extending productive life and reducing tool-change frequency. The result is a measurable improvement in process stability and consistent component tolerances in high-mix and production environments. Designed to fit ISO systems for rapid tool replacement Marked with the ISO designation and rhombic geometry, the insert matches standard external holders and boring bars when the holder’s form, relief angle, tolerance class, fastening method, size and thickness correspond. The cylindrical hole with a single-sided countersink (40°–60°) ensures secure clamping and straightforward indexing, while the plate thickness of 4.76 mm and included angle of 80° help define rigidity in the clamping system. This compatibility simplifies inventory management and supports predictable cycle planning on the shop floor. Practical machining benefits and application guidance The one-sided chipbreaker and 1.2 mm corner radius combine to produce a controlled chip form and robust cutting edge, suited to both external and internal turning where surface finish and edge integrity matter. Select the chipbreaker and grade according to workpiece stability and material: the tougher AH6235 grade is ideal for stainless steels and situations with increased breakout risk. For best results in interrupted cuts, moderate cutting speeds and stable clamping are recommended to exploit the insert’s fracture resistance. Material suitability and quick system integration Made from sintered carbide, the insert is intended for turning operations on stainless steels and other challenging alloys where a tough, PVD-protected cutting edge is advantageous. The combination of 7° clearance angle, rhombic plate form and a 12 mm plate size supports a range of feeds and depths of cut, while the ISO system approach means replacement and spares are straightforward to plan. For application-specific settings or to match the insert to a particular holder, Metav Werkzeuge provides technical advice and availability information. Contact Metav Werkzeuge to discuss application recommendations, availability of the Tungaloy CCMT120412 AH6235 insert or to request material-specific cutting data at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: 6903444-Tungaloy Manufacturer article number: 6903444 Manufacturer SKU: TUN6903444 Brand: Tungaloy Series: ISO-Drehwendeschneidplatten Facts Corner radius: 1.2 mm Plate size: 12 mm Plate thickness: 4.76 mm Included angle: 80° Clearance angle: 7° Hole: with hole Hole style: cylindrical hole + single-sided countersink (40°–60°) Special features Material: carbide Coating: PVD Grade: AH6235 Chipbreaker: one-sided Application: turning (external and internal) Typical use: interrupted cuts, stainless steels System components: ISO insert, suitable external holder or boring bar, shim/clamp set, replacement screws FAQ What materials is this insert best suited for? The AH6235 grade is designed for machining stainless steels and offers enhanced resistance in interrupted cutting and in applications with higher breakout risk; the insert’s PVD coating supports stable performance on challenging alloys. How does the 1.2 mm corner radius affect machining? A 1.2 mm corner radius increases edge strength and reduces the likelihood of chipping during interrupted cuts, improving edge life and supporting more robust depth-of-cut choices. Is the CCMT120412 compatible with standard ISO holders? Compatibility depends on holder form, relief angle, tolerance class, fastening method, size and thickness; the CCMT120412 follows ISO geometry to simplify matching with standard external holders and boring bars. What is the function of the single-sided countersink in the hole? The cylindrical hole with a single-sided countersink ensures reliable clamping and correct seating, which contributes to repeatable tool positioning and stable cutting behaviour. Are replacement screws and clamp sets required for mounting? A system typically comprises the ISO insert, a matching holder or boring bar, a shim or clamp set and replacement screws; check holder specifications to confirm required fasteners. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 120412 AH6235 Wendeplatten - Tungaloy
Benefit from the combination of PVD‑coated carbide AH6235 for improved wear resistance and a 1.2 mm nose radius for stable cutting in interrupted operations; compatibility with ISO CCMT holders ensures fast integration into existing turning setups. Order the insert directly via Metav Werkzeuge or consult our specialists for process matching. CCMT120412 AH6235 — CCMT indexable insert for turning, Tungaloy The CCMT120412 AH6235 is an ISO‑standard indexable turning insert optimised for external and internal turning, particularly suited to stainless steels and interrupted cuts. PVD-coated carbide AH6235 grade 1.2 mm nose radius With cylindrical hole and countersink Optimised for interrupted cuts and stainless steels Increased productivity with a tougher grade The combination of a PVD‑coated carbide substrate and the AH6235 grade produces a tougher insert that is designed to resist chipping during intermittent cuts. This composition reduces unplanned tool changes and leads to a more predictable tool life; the PVD coating improves surface hardness and reduces adhesive wear while maintaining toughness. For applications involving stainless steels or other work‑hardening materials, this balance results in improved cycle times and fewer rejects, translating directly into cost efficiency on the shop floor. Easy integration into ISO turning systems The rhombic CCMT shape with an 80° included angle and ISO designation guarantees compatibility with standard CCMT holders when form, clearance angle, tolerance class, fastening method, size and thickness match. The insert’s dimensions — 12 mm across and 4.76 mm thickness — combined with the cylindrical hole and single‑side countersink (40°–60°) allow secure clamping and simple positioning. This compatibility reduces setup time and allows predictable clamping forces, which in turn stabilise cutting conditions and improve repeatability across batches. Controlled profile and chip management for consistent finishes A 1.2 mm nose radius offers a good compromise between edge strength and contour fidelity, enabling stable feeds while helping to maintain surface quality on the workpiece. The 7° clearance angle and the single‑side chipbreaker geometry promote reliable chip formation and evacuation; this is especially important when machining interrupted surfaces or tougher alloys. The resulting machining behaviour supports consistent surface finish and dimensional accuracy, lowering the time needed for subsequent finishing operations. Contact Metav Werkzeuge to discuss application details for Tungaloy CCMT120412 AH6235 and confirm the right insert geometry for the machining task — email info@metav-werkzeuge.com or call +49 2822 7131930 to arrange technical advice and product availability. Technical data Article number: 6903453 Manufacturer SKU: TUN6903453 Seller SKU: 6903453-Tungaloy Model series: ISO turning indexable inserts Designation: CCMT120412 AH6235 Facts Insert size: 12 mm Plate thickness: 4.76 mm Corner radius: 1.2 mm Clearance angle: 7° Included angle: 80° Special features Material: PVD‑coated carbide (AH6235) Shape: rhombic (CCMT) Hole: cylindrical hole with single‑side countersink 40°–60° Chipbreaker: one‑sided Typical application: external and internal turning; interrupted cuts FAQ What materials is this insert best suited for? The CCMT120412 AH6235 is formulated for tough applications and is especially effective on stainless steels and other materials prone to work hardening; the AH6235 grade provides improved resistance to chipping. How is the insert secured in the toolholder? The insert features a cylindrical hole with a single‑side countersink (40°–60°) and is clamped in standard CCMT holders that match the ISO form, clearance angle and thickness. What advantage does the PVD coating provide? The PVD coating on the carbide substrate enhances surface hardness and reduces adhesive wear while preserving toughness, which helps maintain edge life and consistent cutting behaviour under interrupted conditions. Can this insert be used for both internal and external turning? Yes, the geometry and CCMT form make the insert suitable for both external and internal turning operations when paired with the appropriate holder and setup. Which product code should be ordered for this insert? Order reference details include article number 6903453 and manufacturer SKU TUN6903453 for the CCMT120412 AH6235 Tungaloy indexable insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCMT 120412 AH6235 Wendeplatten - Tungaloy
Benefit from a combination of PVD-coated AH6235 performance, ISO compatibility and a robust 1.2 mm corner radius for reliable stainless-steel turning and interrupted cuts; order the inserts directly via Metav Werkzeuge or ask the consultants for application advice. CCMT120412 AH6235 Tungaloy ISO turning insert for turning — PVD-coated carbide, 1.2 mm radius A CCMT120412 AH6235 Tungaloy insert designed for ISO-compliant external and internal turning, optimised for stainless steel and demanding interrupted-cut applications PVD-coated AH6235 grade for stainless steel ISO CCMT120412 rhombic insert, 7° relief 1.2 mm corner radius for robust cutting edge Cylindrical hole with single-sided countersink 40°–60° High-performance cutting for stainless steel turning The combination of a PVD-coated surface and a tough carbide substrate provides a balance between wear resistance and edge toughness, making this grade particularly suitable for stainless steel and operations with elevated breakout risk. The selected coating and substrate chemistry reduce built-up edge and improve flank wear behaviour during interrupted cuts, which translates into more consistent component quality and longer periods between indexings. This results in a measurable increase in process stability for batch production and high-mix environments where predictable tool life is critical. Predictable clamping and ISO compatibility for uninterrupted workflow As an ISO-designated CCMT insert, the geometry and tolerances are matched to standard external holders; the rhombic shape with an included angle of 80°, a 7° relief angle and a plate thickness of 4.76 mm ensure repeatable seating and secure clamping. The insert’s cylindrical hole with single-sided countersink (40°–60°) supports stable fastening and simple replacement with standard screws and underplates. These features reduce setup time and contribute to reproducible cutting conditions, which supports higher machine uptime and easier tool management across multiple turning centres. Productive cutting and lower process risk through geometry and chip control The one-sided chipbreaker and a 1.2 mm corner radius create a robust cutting edge that tolerates interrupted engagement while promoting predictable chip formation. The geometry suits both external and internal turning tasks where controlled chip evacuation and edge strength are essential. In practice, this means fewer unexpected edge failures and improved surface finish on demanding materials. The insert integrates into a conventional system build-up — insert, compatible holder or boring bar, shim and screw — enabling straightforward stockkeeping and replacement routines that support efficient workshop logistics. Contact Metav Werkzeuge to arrange supply of original Tungaloy CCMT120412 AH6235 inserts and request tailored machining recommendations from our technical consultants Technical data Article number: 6903449 Manufacturer SKU: TUN6903449 SKU: 6903449-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: carbide Grade/coating: AH6235, PVD-coated Facts Inscribed size: 12 Corner radius: 1.2 mm Plate thickness: 4.76 mm Relief angle: 7° Included angle: 80° Hole style: cylindrical hole + single-sided countersink (40°–60°) Special features Rhombic plate form (CCMT) One-sided chipbreaker With hole for screw fastening Suited for stainless steel and interrupted cuts Intended application: turning ISO-compliant geometry for standard holders FAQ What materials is this insert best suited for? This insert is optimised for stainless steel applications; the AH6235 grade and PVD coating improve performance in materials prone to work hardening. Is the insert compatible with standard CCMT holders? Yes, the ISO CCMT120412 geometry and tolerances are intended for compatibility with standard external holders and boring bars designed for CCMT inserts. What does the one-sided chipbreaker provide? The one-sided chipbreaker promotes controlled chip formation in turning, reducing the risk of chip tangling and assisting consistent surface finish on interrupted and continuous cuts. How does the 1.2 mm corner radius affect machining? A 1.2 mm corner radius strengthens the cutting edge, improving resistance to edge chipping and offering a balance between edge life and achievable surface finish. Which fastening arrangement is required for secure mounting? The insert features a cylindrical hole with a single-sided countersink (40°–60°) and is secured using the matching screw, shim and holder combination for reliable clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 120412 AH725 Wendeplatten - Tungaloy
Benefit from the combination of a PVD-coated AH725 carbide grade and a single-sided chipbreaker to secure stable chip formation and consistent performance when turning steel and stainless steels; order the insert directly via Metav Werkzeuge or consult our specialists for tailored selection advice. CCMT120412 AH725 — Tungaloy indexable turning insert, PVD-coated carbide, 1.2 mm radius CCMT120412 AH725 is an ISO‑design indexable turning insert for external and internal turning, engineered for robust chip control and dependable performance in mixed‑material production. Universal PVD-coated carbide AH725 Rhombic CCMT form, 12 mm size 7° clearance, 1.2 mm nose radius Cylindrical hole with single-side countersink Stable cutting and controlled chip flow for consistent cycle times The PVD‑coated AH725 grade offers a balanced solution between toughness and resistance to adhesion, making it suitable for mixed batches of steel and stainless steels where process security is crucial. The combination of a coated carbide substrate and a dedicated chipbreaker reduces the risk of edge chipping and ensures predictable chip formation, which in turn lowers the likelihood of unplanned stoppages. The PVD coating increases edge strength at elevated temperatures and improves wear resistance during medium to high cutting speeds; this yields a reliable machining window and contributes to more uniform tool life. Precision geometry that simplifies setup and improves repeatability The rhombic CCMT form with a 12 mm inscribed circle and a 1.2 mm nose radius gives a predictable profile for finishing and light to medium turning operations. The insert features a 7° clearance angle and an 80° geometry, compatible with a wide range of external and internal holders when the form, tolerance class, fastening and thickness match the toolholder specification. A cylindrical central hole with a single‑side countersink (40°–60°) ensures secure clamping and simple indexable replacement, reducing set‑up time and improving repeatability across batches. Clear indication of dimensions and ISO designation simplifies tool management and reordering. Suited to demanding shopfloor use and flexible production environments As a universal, breakout‑resistant grade, this insert is particularly beneficial where small‑scale tooling or frequent material changes occur. The single-sided chipbreaker is optimised for consistent swarf evacuation in turning, supporting shorter cycle times and cleaner workpieces. In a typical system build—indexable insert, matched external holder or boring bar, shim/underlay and replacement screws—the modular approach allows rapid fault recovery: worn edges can be indexed or replaced without complex regrinding. The result is a practical combination of productivity and low process variability, ideal for production runs that require both flexibility and stability. Contact Metav Werkzeuge for precise advice on matching the Tungaloy AH725 grade to holders and processes; call +49 2822 7131930 or email info@metav-werkzeuge.com to request assistance or place an order Technical data Article number: 6856768 Manufacturer SKU: TUN6856768 SKU: 6856768-Tungaloy Model series: ISO turning indexable inserts ISO designation: CCMT120412 Core technical data Nose radius: 1.2 mm Clearance angle: 7° Included angle/geometry: 80° Plate thickness: 4.76 mm Plate size (inscribed circle): 12 mm Manufacturer article number: 6856768 Features & applications Material: carbide Coating: PVD (AH725) Chipbreaker: single-sided Plate shape: rhombic (CCMT) Hole style: cylindrical hole + single-side countersink (40°–60°) Typical application: external and internal turning Suitable materials: steel and stainless steels System setup: insert, holder/boring bar, shim/underlay, screws ISO‑standardised insert designation FAQ What machining tasks is this insert best suited for? The CCMT120412 AH725 Tungaloy insert is designed for external and internal turning with a focus on mixed production of steel and stainless steels where reliable chip control and process security are required. How does the AH725 coating help in everyday production? The PVD coating of the AH725 grade improves edge strength and wear resistance at elevated temperatures; this enhances tool life and provides more consistent performance across varying cutting speeds and material batches when using the Tungaloy indexable turning insert (SKU 6856768-Tungaloy). Which holder features are necessary for correct compatibility? Compatibility depends on the holder matching the insert form, clearance angle, tolerance class, fastening method, size and thickness; the CCMT120412 geometry and central hole style require a holder designed for CCMT‑type, 12 mm inserts. Can the insert be used for finishing and light profiling? Yes, with a 1.2 mm nose radius and rhombic geometry the insert performs well in finishing and light to medium profiling operations, delivering repeatable surface results when clamped in the appropriate holder. What replacement parts are recommended for a complete system setup? A complete setup typically includes the indexable insert, a compatible external holder or boring bar, a shim/underlay and replacement screws; selecting the correct holder and fastening hardware is essential for the CCMT120412 AH725 insert to achieve stable results. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 120412 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of PVD‑coated carbide AH725, a compact 1.2 mm corner radius and ISO compatibility for stable, versatile turning operations; order the CCMT120412 AH725 insert directly via Metav Werkzeuge or consult our advisors for application support. CCMT120412 AH725 Tungaloy turning insert — PVD‑coated carbide, 1.2 mm radius A CCMT120412 AH725 Tungaloy turning insert engineered for ISO‑standard external and internal turning, offering a universal, fracture‑resistant grade optimised for steel and stainless steels. PVD‑coated carbide AH725 Universal grade for steel and stainless steels 1.2 mm corner radius for secure edges ISO‑standard CCMT120412 form Reliable cutting performance for mixed-production environments The insert delivers consistent chip control and predictable durability thanks to the PVD‑coated carbide composition and the AH725 grade, which is formulated as a universal, breakout‑resistant option for machining steel and stainless steels. With a 1.2 mm corner radius the geometry balances edge strength and surface quality, making the component suitable for smaller toolholders and operations requiring high process security. The ISO conformity of the plate ensures that fitment is determined by form, clearance, tolerance class, fastening, size and thickness, so replacement and inventory management in mixed fleets remain straightforward. Consistent surface quality with extended tool life The hard, wear‑resistant coating reduces flank wear and improves resistance to built‑up edge, which translates into longer service intervals and more reliable production runs. The rhombic form and the single‑sided chipbreaker create a positive cutting engagement that supports stable cutting forces and a good surface finish on both roughing and finishing passes. The modest 7° clearance helps maintain the correct cutting geometry while limiting radial intrusion; in practice this combination reduces vibration and improves repeatability across batches. Plug‑and‑play integration into ISO turning toolkits Designed for easy integration into standard ISO holders, the insert features a 12 mm size, 4.76 mm thickness and a central hole with a cylindrical bore plus a single‑side countersink (40°–60°) for secure clamping. The 80° lead angle provides a versatile approach for both external and internal turning tasks. When selecting the appropriate chipbreaker and holder, consider the workpiece material and required stability — the CCMT120412 AH725 excels where process reliability and broad material coverage are priorities, particularly in applications with frequent material changes. For tailored advice on integrating Tungaloy turning technology into production, contact Metav Werkzeuge — phone +49 2822 7131930 or email info@metav-werkzeuge.com to discuss availability and application match. Technical data Article number: 6856702 Manufacturer SKU: TUN6856702 SKU: 6856702-Tungaloy Manufacturer: Tungaloy Series: ISO turning inserts Facts Corner radius: 1.2 mm Lead angle: 80° Clearance: 7° Thickness: 4.76 mm Size: 12 Special features Grade: AH725 (PVD‑coated carbide) Plate form: rhombic (CCMT) Chipbreaker: single‑sided Hole: with cylindrical bore + one‑side countersink (40°–60°) Typical use: external and internal turning Compatible materials: steel and stainless steels FAQ What materials is this insert suitable for? The CCMT120412 AH725 insert is specified for steel and stainless steels, the AH725 grade giving universal, breakout‑resistant performance across these materials. Which toolholders fit this insert? Compatibility is determined by the ISO CCMT form: holders matching the plate form, clearance, tolerance class, fastening, size 12 and thickness 4.76 mm are suitable for secure clamping. Is the insert intended for roughing or finishing? With a 1.2 mm corner radius and single‑sided chipbreaker, the insert supports both finishing and general‑purpose turning; selection of chipbreaker and cutting parameters will refine performance for roughing or fine finishing. How does the PVD coating benefit production? The PVD coating on the AH725 grade reduces wear and built‑up edge, improving tool life and process stability in varied production runs. Does the insert include a central hole for clamping? Yes — the plate features a cylindrical hole with a one‑side countersink (40°–60°) to ensure reliable clamping in compatible toolholders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCMT 120412 AH725 Wendeplatten - Tungaloy
The combination of a PVD-coated carbide grade and an ISO-compliant geometry delivers reliable performance and consistent chip control in mixed-material turning operations; benefit from enhanced process security and long tool life. Order the insert directly via Metav Werkzeuge or consult our technical advisers for application support. CCMT120412 AH725 Tungaloy indexable insert — PVD-coated carbide, universal turning The CCMT120412 AH725 is an ISO-standard rhombic turning insert for external and internal turning, engineered for universal use on steel and stainless steels with a focus on process security and stable chip formation. ISO rhombic insert CCMT120412 PVD-coated carbide AH725 for steels 1.2 mm corner radius for stable cuts Cylindrical hole with single-sided countersink Greater process security for changing workpiece materials The PVD-coated AH725 grade provides a balanced combination of toughness and wear resistance, making it suitable for machining both steel and stainless steels in environments where material batches or workpiece mixes vary. By choosing a universal PVD-coated carbide grade, the risk of unexpected insert breakouts is reduced and tool change frequency can be minimised, which supports steady production cycles. This reliability translates directly into predictable cycle times and fewer interruptions on lathes or turning centres. Geometry that supports consistent chip control and tool life The rhombic insert form with an 80° principal angle and a 1.2 mm corner radius yields a robust cutting edge that withstands intermittent cuts and moderate interruptions. The specified 7° clearance reduces rubbing and heat buildup at the flank, while the single-sided chipbreaker promotes controlled chip formation and evacuation in turning operations. These geometric choices reduce edge loading and contribute to a more even wear pattern, which helps maintain surface quality and extend the effective life of the insert. ISO compatibility for simple set-up and flexible tooling Manufactured to ISO dimensions, the insert matches holders that correspond in form, clearance angle, tolerance class, fastening type, size and thickness, enabling quick retrofits and consistent clamping behaviour. The cylindrical hole with a single-sided countersink (40°–60°) ensures secure fastening and repeatable positioning. With a plate thickness of 4.76 mm and a standard CCMT shape, this insert integrates into common tool assemblies, simplifying inventory management and reducing the need for bespoke tooling solutions. Operational benefits and application guidance The insert is optimised for conventional turning tasks and is particularly valuable where a compromise between toughness and wear resistance is required. The combination of the PVD coating and the substrate material supports good edge stability on smaller tools and in applications demanding consistent results. For best outcomes, select a matching chipbreaker and grade variation aligned with the workpiece, machining strategy and machine rigidity to fully exploit the insert’s strengths. Contact Metav Werkzeuge today to discuss how the Tungaloy CCMT120412 AH725 insert can stabilise production processes — our specialists are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to advise on holder compatibility and optimal grade selection Technical data Article number: 6865484 Manufacturer SKU: TUN6865484 Label: CCMT120412 AH725 Tungaloy-Wendeplatte Model series: ISO-Drehwendeschneidplatten SKU: 6865484-Tungaloy Facts Corner radius: 1.2 mm Insert size: 12 mm Plate thickness: 4.76 mm Clearance angle: 7° Principal angle: 80° Special features Material: cemented carbide Coating / grade: PVD-coated AH725 Plate form: rhombic (CCMT) Hole style: cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: one-sided Typical application: turning (external and internal) Compatibility: ISO-standard insert, fits matching ISO holders FAQ Is this insert suitable for both external and internal turning? Yes. The CCMT120412 AH725 indexable insert is designed for both external and internal turning applications and performs well when combined with an appropriate holder and chipbreaker for the task. Which materials is the AH725 grade recommended for? The AH725 grade is a universal PVD-coated carbide selected for reliable performance on steel and stainless steels, especially where material mixes and process security are priorities. How does the 1.2 mm corner radius affect cutting performance? A 1.2 mm corner radius reinforces the cutting edge, improving resistance to edge chipping and permitting slightly higher depths of cut while delivering stable surface finishes in interrupted or continuous turning. What must be checked to ensure holder compatibility? Compatibility is determined by the insert form (CCMT), clearance angle, tolerance class, fastening type, insert size and thickness; verify these dimensions against the holder specifications before mounting. Does the insert require a special clamp or screw? The CCMT120412 features a cylindrical hole with a single-sided countersink; use the matching clamping set and screws designed for ISO-standard CCMT inserts to ensure correct seating and repeatability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 120412 T6215 Wendeplatten - Tungaloy
Take advantage of high wear resistance and ISO compatibility for consistent, productive stainless-steel turning; the T6215 CVD-coated carbide grade offers improved edge stability and longer life in stable to mildly interrupted cuts. Order the CCMT120412 T6215 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. CCMT120412 T6215 — CCMT turning insert for stainless-steel, CVD-coated carbide by Tungaloy CCMT120412 T6215 is a rhombic ISO turning insert designed for external and internal turning of stainless steel under stable or slightly interrupted conditions. CVD-coated carbide grade T6215 Suitable for stainless-steel turning Rhombic 80° geometry, 7° clearance Central hole with cylindrical bore and countersink Reliable performance for stainless-steel machining The combination of a CVD-coated surface and a wear-resistant carbide substrate provides predictable tool life and steady cutting behaviour when machining rostfreier Stahl (stainless steel). As a result, process stability is improved and scrap rates are reduced. The T6215 grade is formulated for abrasive and adhesive wear resistance, which means longer intervals between indexings and fewer unscheduled tool changes — a clear advantage where uptime and surface quality matter. System compatibility and quick index change for efficient production Built to ISO dimensions, the insert integrates with standard holders so replacement is straightforward and repeatable. The rhombic 80° shape and central hole with a 40°–60° countersink ensure secure clamping and consistent seating in the cutter body. Because compatibility depends on form, clearance angle, tolerance class, attachment method, size and thickness, the ISO designation simplifies selection and reduces downtime when switching inserts, supporting faster tool setup and predictable process control. Geometry and features that support finishing and roughing tasks The 1.2 mm corner radius provides a balance between edge strength and achievable surface finish; a larger radius increases robustness for heavier cuts, while a smaller radius favours finer finishes. The 7° clearance minimises flank rubbing and helps maintain sharp cutting action, and the single-sided chipbreaker is optimised for controlled chip formation when turning stainless steel under typical setups. The plate thickness of 4.76 mm and the 12 mm inscribed circle suit a wide range of external and internal turning applications without compromising rigidity. Practical guidance for integration into production Intended for external and internal turning, select the chipbreaker and grade to match workpiece material, cutting mode and machine-tool rigidity. For stable setups the T6215 grade will deliver extended life; for more interrupted operations or specialised alloys consider evaluating holder stability and smaller depth of cut steps. The ISO-standard format facilitates stocking and rapid replacement, helping to keep cycle times low and maintain consistent component quality. For availability, technical matching to holders or to discuss batch supply, contact Metav Werkzeuge by phone at +49 2822 7131930 or by email at info@metav-werkzeuge.com for expert advice and next-step planning. Technical data Article number: 6903073 Manufacturer SKU: TUN6903073 SKU: 6903073-Tungaloy Model series: ISO turning inserts Designation: CCMT120412 Facts Corner radius: 1.2 mm Insert thickness: 4.76 mm Inscribed circle: 12 mm Geometry: rhombic 80° Clearance angle: 7° Special features Coating: CVD Material: cemented carbide Grade: T6215 Hole: with cylindrical bore and one-sided countersink (40°–60°) Chipbreaker: single-sided Application: turning FAQ What materials is this insert suitable for? The CCMT120412 T6215 Tungaloy turning insert is optimised for rostfreier Stahl (stainless steel) and delivers wear resistance suited to stable and lightly interrupted turning operations. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO dimensions; compatibility is determined by shape, clearance angle, tolerance class, attachment method, size and thickness, so matching the holder to these parameters ensures proper fit and clamping. How does the 1.2 mm corner radius affect machining? A 1.2 mm radius enhances edge strength for heavier cuts while still allowing a good surface finish; it represents a compromise between robustness and the ability to achieve finer surface textures. What is the benefit of the CVD coating on this grade? The CVD-coated surface on the T6215 grade increases resistance to abrasive and adhesive wear, extending effective tool life and maintaining cutting-edge stability in stainless-steel turning. Does the insert have a specialised chipbreaker? Yes, the insert features a single-sided chipbreaker designed to control chip formation during turning of stainless steel, improving process reliability and surface integrity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 120412 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide, precise ISO geometry and reliable chip control for efficient turning of stainless steels — order directly via Metav Werkzeuge or consult their technical advisors for application-specific recommendations. CCMT 120412 T6215 turning insert (Tungaloy) — ISO-format CVD-coated carbide The CCMT120412 T6215 is an ISO-format indexable turning insert designed for stable to slightly interrupted turning of stainless steels, offering robust wear resistance and predictable tool life. ISO-format rhombic insert, 12 mm CVD-coated carbide grade T6215 Single-sided chipbreaker, with hole and countersink 7° relief angle for secure clamping Durable coating for prolonged stainless-steel turning The CCMT120412 is manufactured from CVD-coated carbide, a combination that delivers enhanced wear resistance and thermal stability during high-friction turning operations. The CVD coating forms a hard, wear-resistant surface that slows flank and crater wear, enabling longer cutting intervals and more consistent component quality. For workshops aiming to reduce tooling changes and achieve repeatable part tolerances, this coating-grade pairing provides measurable productivity gains and predictable tool-life behaviour. ISO conformity and geometry for fast integration into tool systems Designed to ISO geometry, the insert’s rhombic form and 12 mm designation permit straightforward selection of compatible holders. Key dimensions such as the 1.2 mm corner radius, 4.76 mm plate thickness and the 80° included angle influence cutting forces and surface finish; the 7° relief angle supports reliable clamping and clearance. The insert features a cylindrical hole with a one-sided countersink (40°–60°) for standard screw fixation. Because holder compatibility depends on shape, clearance angle, tolerance class, mounting style, size and thickness, systems integration is simplified when these parameters are matched. Stable chip control and consistent surface quality Equipped with a single-sided chipbreaker, the insert supports efficient chip formation in turning operations of challenging materials such as stainless steel, helping to avoid built-up edge and to maintain surface integrity. In stable to lightly interrupted cuts the geometry promotes uniform chip evacuation and consistent finishes, reducing rework and downtime. For process optimisation, Metav Werkzeuge’s technical advisors can supply cutting data, recommend feeds and speeds for the grade T6215, and suggest suitable holder geometries to maximise productivity. Contact Metav Werkzeuge for an application-specific recommendation on Tungaloy CCMT 120412 T6215 inserts — technical advisors are available by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 6903082 SKU (manufacturer): TUN6903082 SKU (vendor): 6903082-Tungaloy Label: CCMT120412 T6215 Tungaloy-Wendeplatte Numbers / Core data Corner radius: 1.2 mm Plate thickness: 4.76 mm Plate size: 12 mm Included angle: 80° Relief (clearance) angle: 7° Manufacturer article number: 6903082 Special features CVD-coated carbide grade T6215 Designed for turning of stainless steels ISO-format turning insert (rhombic) Single-sided chipbreaker Cylindrical hole with one-sided countersink (40°–60°) Compatibility governed by shape, clearance, tolerance, fastening, size and thickness Model series: ISO turning inserts Manufacturer: Tungaloy FAQ What materials is this insert designed for? The CCMT120412 T6215 insert is optimised for turning stainless steel under stable to slightly interrupted cutting conditions, using its CVD-coated carbide grade for enhanced wear resistance. How does the chipbreaker affect machining? The single-sided chipbreaker on the T6215 grade promotes controlled chip formation and evacuation during turning, improving surface finish and reducing the risk of built-up edge. Which holder features must be matched for correct fit? Holder selection requires matching the insert’s rhombic form, clearance (7°) and thickness (4.76 mm), as well as the plate size (12 mm) and fixing method compatible with the cylindrical hole and countersink. Is this insert suitable for interrupted cuts? The insert is suitable for stable to slightly interrupted turning; for heavy interruptions or unstable setups, a different geometry or a more robust grade may be recommended. What information is available to set cutting parameters? Cutting data for the CCMT120412 T6215 insert are available from Metav Werkzeuge’s technical team, who can advise on feed, speed and coolant strategy for the intended application. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 120412 T6215 Wendeplatten - Tungaloy
Robust CVD-coated carbide in grade T6215 and a 1.2 mm corner radius deliver repeatable performance when turning rostfreier Stahl under stable to lightly interrupted conditions; the rhombic CCMT geometry with 7° clearance supports wide holder compatibility and reliable chip control. Order the insert directly via Metav Werkzeuge or ask our consultants if needed. CCMT120412 T6215 Tungaloy indexable insert for turning A CCMT120412 T6215 indexable insert from Tungaloy designed for precision turning of rostfreier Stahl with a rhombic CCMT geometry and a single-sided chipbreaker. CVD-coated carbide grade T6215 Optimised for rostfreier Stahl turning Rhombic CCMT geometry, 7° clearance 1.2 mm corner radius for robust edge High-performance cutting for rostfreier Stahl with consistent wear resistance The CVD-coated carbide grade T6215 provides a balance between wear resistance and edge toughness that is particularly suited to machining rostfreier Stahl. The CVD coating reduces adhesive wear and extends tool life under stable to slightly interrupted cuts, which means fewer insert changes and more continuous production time. Explained simply, a CVD-coated insert forms a thin, hard layer over the carbide substrate that improves resistance to heat and abrasion; this translates into longer life on demanding rostfreier Stahl workpieces and more predictable process windows for industrial turning operations. Geometry and compatibility that simplify tool selection The rhombic CCMT geometry with an included angle of 80°, a 7° clearance and a 1.2 mm corner radius makes the insert compatible with a wide range of external holders and shanks. Compatibility is determined by the insert form, clearance angle, tolerance class, mounting method, size and thickness; having standard ISO geometry ensures that the insert fits common holder families and reduces setup complexity. The insert’s central hole—with a cylindrical bore and a one-sided countersink (40°–60°)—permits secure clamping while enabling easy indexing, supporting stable cutting even when machining interrupted surfaces. Practical system design and application guidance for reliable production The insert is supplied as part of a system comprising an ISO indexable insert, the correct external holder or shank, a shim or clamping kit and replacement screws; selecting the appropriate chipbreaker and grade according to workpiece material and process stability is decisive. The single-sided chipbreaker on this insert supports controlled chip formation for common turning operations, improving surface finish and swarf handling. For shop-floor application: pair the insert with a suitably rigid holder, adjust feeds and speeds conservatively at first, and exploit the insert’s strengths—CVD-coated carbide, robustness and geometric standardisation—to improve process stability and reduce non-productive time. For ordering, grade selection or application advice on Tungaloy inserts in grade T6215, contact Metav Werkzeuge by e-mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6903077 Manufacturer SKU: TUN6903077 SKU: 6903077-Tungaloy Model series: ISO indexable turning inserts Material: carbide Core data Corner radius: 1.2 mm Plate thickness: 4.76 mm Plate size: 12 mm Relief angle: 7° Included angle: 80° Special features ISO designation: CCMT120412 Geometry: rhombic Hole: cylindrical hole with one-sided countersink (40°–60°) Chipbreaker: single-sided Coating / grade: CVD-coated, T6215 Application: turning rostfreier Stahl System components: compatible with external holder or shank, shim/clamping set and replacement screws FAQ What materials is the CCMT120412 T6215 Tungaloy indexable insert best suited to machine? The CCMT120412 T6215 Tungaloy indexable insert is optimised for machining rostfreier Stahl and performs well under stable to lightly interrupted turning conditions. How does the T6215 grade compare for tool life and toughness? Grade T6215 offers an emphasis on wear resistance through CVD coating while retaining sufficient toughness, so the CCMT120412 T6215 insert provides longer life on abrasive rostfreier Stahl workpieces without excessive chipping. What should be considered when choosing a holder for this insert? Holder selection depends on the CCMT form, 7° clearance, tolerance class, mounting and plate thickness; the insert’s ISO CCMT geometry ensures compatibility with many standard external holders and shanks. Can this insert be used for interrupted cuts? Yes, the CCMT120412 T6215 insert is suitable for stable to mildly interrupted cuts; the robust 1.2 mm corner radius and CVD-coated carbide construction help withstand occasional interruptions. What is the function of the central hole and countersink on this insert? The cylindrical hole with a one-sided countersink (40°–60°) provides secure and repeatable clamping in compatible holders, simplifying indexing and maintaining cutting stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 120412 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD‑coated carbide durability and a robust rhombic geometry for consistent mid‑steel turning. The insert delivers reliable edge strength and high productivity in continuous to light interrupted cuts — order the CCMT 120412 T9215 insert directly via Metav Werkzeuge or consult the sales team for application advice. CCMT 120412 T9215 turning insert by Tungaloy — ISO rhombic insert for turning The CCMT120412 T9215 is an ISO‑indexable rhombic turning insert designed for external and internal turning, offering a CVD‑coated carbide grade optimised for mid‑range steel machining. CVD‑coated grade T9215 for mid‑range steel ISO rhombic form CCMT 80° included angle 1.2 mm corner radius for robust edge strength Cylindrical hole with single‑side countersink 40°–60° Increased tool life and consistent wear resistance for production shifts The CVD‑coated carbide in grade T9215 is formulated to combine high wear resistance with good fracture toughness, translating into longer tool life and fewer insert changes during production. The CVD coating provides a hard, wear‑resistant outer layer while the carbide substrate maintains toughness; this balance is particularly beneficial when machining medium‑hard steels under continuous and light interrupted cuts. For operations seeking stable cycle times and predictable consumable behaviour, the combination of coating and substrate reduces flank wear and helps maintain component tolerances over longer intervals. Secure geometry and straightforward holder compatibility reduce downtime As an ISO‑indexable turning insert, the component uses standard geometric parameters to ensure predictable seating and clamping. The rhombic 80° included angle and the 1.2 mm corner radius provide a compromise between edge strength and dimensional control, suitable for finishing and general turning tasks. Compatibility with a toolholder depends on form, clearance angle (7°), tolerance class, fixing method, size (12) and thickness (4.76 mm); these parameters ensure correct seating and minimise vibration. The insert’s cylindrical hole with a 40°–60° single‑side countersink enables standard screw clamping with a shim or clamping set, simplifying replacement and reducing fixture‑related downtime. Application guidance: select chipbreaker and holder for best results This grade and geometry perform best when the chipbreaker and holder stability match the workpiece material and cutting conditions. The single‑sided chipbreaker supplied is intended for predictable chip formation in steel; for heavily interrupted cuts or unstable set‑ups, a different chip control geometry or a more robust clamping arrangement should be chosen. The system is built around the indexable plate, a compatible external holder or boring bar, a shim/clamping set and the appropriate screw; keeping spare screws and shims on hand supports quick changeovers. Practical selection — matching grade T9215, the chipbreaker style and the holder rigidity — delivers improved surface finish, reduced rework and higher overall productivity. For availability and tailored machining advice on the CCMT 120412 T9215 Tungaloy insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — application consultancy and supply are available from Metav Werkzeuge Technical Data Manufacturer article number: 6773968 SKU: 6773968-Tungaloy Manufacturer SKU: TUN6773968 Model series: ISO‑indexable turning inserts Material: carbide Type designation: CCMT120412 T9215 Facts Included angle: 80° Clearance angle: 7° Corner radius: 1.2 mm Plate thickness: 4.76 mm Plate size: 12 Special features CVD‑coated carbide grade T9215 Single‑sided chipbreaker Rhombic insert form CCMT (ISO 120412) Cylindrical hole with single‑side countersink 40°–60° Suitable for external and internal turning of mid‑range steel System components: insert, external holder or boring bar, shim/clamping set, spare screws FAQ What materials is the CCMT 120412 T9215 best suited for? The Tungaloy CCMT 120412 T9215 is optimised for mid‑range steel machining and performs well in continuous to light interrupted cuts; select the chipbreaker and holder according to workpiece stability. How is compatibility with a toolholder determined? Compatibility is defined by form, clearance angle (7°), tolerance class, fixing method, size (12) and thickness (4.76 mm); verify these parameters on the holder drawing before fitting the insert CCMT120412. What advantages does the T9215 coating provide? Grade T9215 is a CVD‑coated carbide developed for a balance of wear resistance and fracture toughness, resulting in extended tool life and reliable performance during production runs. Can this insert be used for internal turning? Yes, the CCMT120412 insert is suitable for both external and internal turning when combined with an appropriate boring bar and the correct chipbreaker for the application. What is the hole and clamping style of the insert? The insert features a cylindrical hole with a single‑side countersink (40°–60°) for standard screw clamping together with a shim or clamping set. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCMT 120412 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated T9215 carbide for high wear resistance and a 1.2 mm corner radius for consistent component profiles to keep production steady and predictable. The insert's ISO CCMT geometry and single-sided chipbreaker enable controlled chips and reliable performance in mid-range steel turning. Order the CCMT120412 directly via Metav Werkzeuge or ask our consultants for tailored advice. CCMT 120412 T9215 turning insert — Tungaloy — CVD-coated carbide, 1.2 mm radius CCMT120412 T9215 Tungaloy-Wendeplatte is an ISO-indexed turning insert designed for external and internal turning of steel, offering stable chip control and durable performance for continuous to lightly interrupted cuts CVD-coated T9215 grade for steel machining 1.2 mm corner radius for consistent profiles Single-sided chipbreaker for controlled chips ISO CCMT rhombic insert, 80° lead angle Boosted productivity through predictable wear resistance The CVD-coated carbide grade T9215 combines elevated wear resistance with good fracture toughness, which translates directly into longer tool life and fewer index changes during production. For shops machining mid-range steel, this means longer uninterrupted runs and reduced tooling logistics. The coated substrate helps maintain cutting-edge integrity under continuous and lightly interrupted cutting, improving process stability and reducing unexpected downtime. Precise part geometry with a 1.2 mm corner radius A 1.2 mm corner radius delivers consistent profile definition without excessive cutting forces, balancing surface finish and tool stress. The rhombic CCMT geometry with an 80° lead angle supports neutral cutting conditions, limiting radial forces and helping to produce accurate external and internal diameters. Where tighter tolerances are required, the insert geometry assists in maintaining repeatability across batches, reducing rework and scrap rates. Reliable chip control and straightforward tool matching The integrated single-sided chipbreaker is configured for effective chip formation during turning of steel grades, improving evacuation in through-turning and facing operations. Compatibility with standard ISO holders is determined by form, clearance angle (7°), tolerance class, fixation and thickness; the insert’s dimensions — 12 mm size and 4.76 mm thickness with a centred hole and cylindrical hole plus one-sided countersink (40°–60°) — facilitate straightforward tool assembly. This simplifies tool changeover and supports consistent machining outcomes. Practical benefits for workshop efficiency Using an ISO-indexed insert reduces inventory complexity: a single CCMT120412 style insert can be deployed across a variety of holders and toolposts when geometry and clamping match, lowering stocking requirements. The combination of a robust carbide substrate and protective coating means fewer tool rotations and predictable intervention intervals, helping to plan maintenance windows and optimise spindle time. The result is a measurable gain in operational throughput with reduced administrative overhead. Contact Metav Werkzeuge today for application-specific recommendations and availability of the CCMT120412 T9215 Tungaloy insert Technical data Article number: 6774051 SKU: 6774051-Tungaloy Manufacturer SKU: TUN6774051 Facts Corner radius: 1.2 mm Clearance angle: 7° Lead / approach angle: 80° Thickness: 4.76 mm Size: 12 Special features ISO designation: CCMT120412 Grade: T9215 Coating/type: CVD-coated carbide Chipbreaker: single-sided Hole: with hole — cylindrical hole + one-side countersink (40°–60°) Shape: rhombic FAQ Is this insert suitable for external and internal turning of steel? Yes. The CCMT120412 T9215 insert from Tungaloy is designed for both external and internal turning and is optimised for mid-range steel machining with reliable chip control. What benefits does the T9215 grade offer? The T9215 CVD-coated carbide grade provides enhanced wear resistance together with good fracture toughness, supporting longer tool life and steady cutting performance in continuous to lightly interrupted operations. Which holders are compatible with this insert? Compatibility depends on holder form, clearance angle (7°), tolerance class, fixation, size and thickness; the insert’s ISO CCMT geometry and 12 mm size fit standard CCMT external holders and boring bars designed for CCMT inserts. How does the chipbreaker affect machining? The single-sided chipbreaker on this insert promotes controlled chip formation for common steel turning tasks, aiding chip evacuation and reducing the risk of chip entanglement in through-turning and facing. What is the hole style and why does it matter? The insert has a cylindrical hole with a one-sided countersink (40°–60°), which secures clamping stability and ensures correct seating on the insert seat, contributing to repeatable cutting performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 120412 T9225 Wendeplatten - Tungaloy
Combining the CVD-coated carbide T9225 grade with a 1.2 mm corner radius and a robust rhombic geometry, this insert provides stable chip control and extended tool life for medium-to-heavy steel turning; order via Metav Werkzeuge or consult the team for tailored selection and rapid supply. CCMT120412 120412 T9225 turning insert (Tungaloy) — CVD-coated carbide, 1.2 mm radius CCMT120412 is a standard ISO rhombic turning insert for external and internal turning applications, designed for medium to heavy-duty steel machining. CVD-coated carbide grade T9225 Robust universal grade for steel machining Rhombic CCMT geometry, 80° cutting angle 1.2 mm corner radius, single-sided chipbreaker Consistent cutting performance for demanding turning tasks The combination of CVD-coated surface treatment and a carbide substrate in grade T9225 provides a balance of wear resistance and toughness intended for interrupted cuts and variable engagement. This construction reduces flank wear under higher thermal loads, which translates into more predictable tool life and fewer unplanned tool changes. For operations on medium to heavy steel, the insert’s durability supports longer unmanned runs and higher process reliability without sacrificing dimensional control. Designed for system compatibility and straightforward integration As an ISO-standard insert, the component fits into established tool systems when matched on form, clearance angle, tolerance class, fixation and size. The insert’s rhombic geometry and 80° cutting angle make it suitable for a wide range of turning holders and boring bars; correct pairing with the holder and shim/clamp set ensures clamping stability and repeatable results. The system approach—insert, external holder or boring bar, and replacement screws—simplifies spare-part planning and reduces tooling complexity on the shop floor. Better chip control and surface quality with reduced rework The single-sided chipbreaker is tailored for efficient chip evacuation during medium to heavy cuts, lowering the risk of built-up edge and improving surface finish on ferritic and alloyed steels. Stable chip formation helps to avoid downtime for chip clearing, while the robust grade supports consistent cutting forces, benefiting process repeatability. The net effect is improved productivity and a reduced total cost per part through fewer tool changes and less secondary finishing. Practical mounting details that aid set-up and stability Key design particulars assist setup and machining stability: a plate thickness of 4.76 mm, plate size 12, a 1.2 mm corner radius and a 7° clearance angle are matched to moderate-depth turning operations. The insert features a cylindrical hole with a one-sided countersink (40°–60°) which provides secure positive location in compatible clamping systems. These mechanical attributes make the insert straightforward to seat and align, aiding repeatable clamping and minimising run-out during operations. For supply, technical matching or to discuss recommended grades for specific steel alloys, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 for expert assistance with Tungaloy inserts and rapid delivery through Metav Werkzeuge. Technical data Article number: 6781044 Manufacturer SKU: TUN6781044 SKU: 6781044-Tungaloy Model series: ISO-turning inserts Material: carbide Data Plate size: 12 Plate thickness: 4.76 mm Corner radius: 1.2 mm Clearance angle: 7° Cutting angle: 80° Special features Grade: T9225 Coating: CVD-coated Plate form: rhombic (CCMT) Chipbreaker: single-sided Hole style: cylindrical hole + one-sided countersink (40°–60°) Typical application: external and internal turning (steel machining) FAQ What materials is this insert suitable for? The Tungaloy CCMT120412 in grade T9225 is designed primarily for medium to heavy steel machining; the grade and CVD-coated carbide substrate balance wear resistance and toughness for those materials. How does the T9225 coating affect performance? The CVD-coated layer on the T9225 grade improves thermal and abrasive wear resistance, which leads to longer tool life and more consistent surface quality when turning under higher cutting temperatures. Is the CCMT120412 compatible with standard ISO holders? Yes. The insert is an ISO-format rhombic plate and compatibility depends on matching form, clearance angle, tolerance class, fixation method, size and thickness with the chosen holder. Which chipbreaker should be selected for light finishing cuts? For finishing, a finer or negative chip control geometry is generally recommended; the CCMT120412 here features a single-sided chipbreaker suited to medium-to-heavy cuts—select a chipformer appropriate to the intended finish and feed rates. What mounting details should be checked before first use? Confirm plate seating on the shim, secure fastening with the correct screw and check the cylindrical hole with one-sided countersink aligns with the clamp. Also verify the holder matches the 12 size and 4.76 mm thickness to ensure stable clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 120412 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide grade and a 1.2 mm corner radius for reliable, heavy-duty steel turning; this reduces tool changes and supports consistent surface finish. Order the insert directly via Metav Werkzeuge or ask our consultants for fitting and application advice. CCMT 120412 T9225 turning insert (CCMT120412, Tungaloy) — ISO rhombic insert for medium to heavy steel turning CCMT120412 T9225 is an ISO-standard rhombic turning insert designed as a robust universal grade for demanding steel turning applications CVD-coated carbide for durable performance Universal grade for medium to heavy steel Rhombic CCMT form with cylindrical hole + countersink 1.2 mm corner radius for strength and stability Reliable cutting performance under variable conditions The T9225 grade combines a CVD-coated carbide substrate with a formulation tuned for toughness, making it suitable for medium to heavy steel turning where varying engagement or intermittent cuts occur. The tougher grade reduces the risk of chipping during interrupted cuts and supports longer edge life, which in turn decreases unplanned tool changes and downtime. The included chipbreaker geometry is chosen to match stability and the required surface finish, so selecting the correct chip control variant ensures repeatable results and enhanced process efficiency. Seamless integration into ISO turning systems Designed to the ISO designation, the insert fits standard holders when form, 7° clearance angle, tolerance class, clamping method, size and thickness are matched. The CCMT form and cylindrical hole + countersink (40°–60°) allow secure clamping with common outer holders or boring bars, while the 4.76 mm thickness provides a stable support plane under load. These dimensional standards simplify toolroom logistics and make replacement straightforward, reducing set-up time and ensuring the insert runs true in appropriately specified tooling systems. Higher productivity with predictable maintenance cycles A 1.2 mm corner radius offers a balanced compromise between strength and edge definition, supporting deeper cuts with improved vibration resistance and consistent surface quality. Using the insert as part of a complete system — insert, compatible holder, shim/clamping set and spare screws — promotes predictable maintenance intervals and eases inventory management. The robust universal composition of the grade means fewer insert variants are required across a range of steel components, which optimises stockholding and boosts overall production throughput. For reliable, productive turning with Tungaloy’s CVD-coated T9225 grade, contact Metav Werkzeuge for tailored advice and fast supply — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6781315 SKU: 6781315-Tungaloy Manufacturer SKU: TUN6781315 Core specifications Insert designation: CCMT120412 Thickness: 4.76 mm Insert size: 12 mm Approach angle: 80° Clearance angle: 7° Corner radius: 1.2 mm Features Material: carbide Coating / grade: T9225 (CVD-coated) Shape: rhombic (CCMT) Hole: cylindrical hole with one-sided countersink (40°–60°) Chipbreaker: one-sided Application: turning FAQ What materials is this insert designed for? The CCMT120412 T9225 turning insert is formulated for steel, particularly medium to heavy steel turning where toughness and stable chip control are required. Will this insert fit standard CCMT holders? Yes — the insert follows ISO dimensions; compatibility depends on matching form, 7° clearance angle, thickness (4.76 mm) and clamping style to the holder. Which cutting conditions suit the T9225 grade best? T9225 is optimised for variable engagement and lightly interrupted cuts in steel, offering good edge strength and consistent tool life under mixed conditions. How does the 1.2 mm corner radius affect machining? A 1.2 mm corner radius improves edge robustness and vibration resistance, enabling deeper cuts and more stable finishing while balancing surface quality and tool life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMW 060204 T5115 Wendeplatten - Tungaloy
Benefit from a combination of high-feed capability, robust CVD-coated carbide and a compact rhombic geometry for consistently productive roughing cycles. Take advantage of predictable edge life and reduced downtime through system compatibility; order the insert via Metav Werkzeuge or consult our application specialists for process optimisation. CCMW 060204 T5115 indexable insert for turning — Tungaloy A CCMW 060204 T5115 indexable insert designed for high-feed turning and productive roughing in stable clamping setups TurnTenFeed series for high-feed turning CVD-coated carbide grade T5115 Rhombic 06 form with 80° cutting angle Optimised for cast iron machining Faster roughing with stable cutting performance The TurnTenFeed family is engineered for high-feed turning, delivering increased material removal rates without sacrificing process stability. The CVD-coated carbide composition of the grade provides a balance between wear resistance and edge stability, so the cutting edge withstands the heat and abrasion typical for heavy roughing. By combining a compact rhombic geometry with a robust substrate, the insert enables productive passes under stable clamping conditions, reducing cycle times and improving overall throughput. The result is a tool that supports efficient production planning and reliable component quality. Predictable edge life and reliable chip behaviour A CVD coating on a carbide substrate yields consistent performance across long series production. The cutting grade used here emphasises controlled flank wear and a stable cutting edge, which leads to predictable tool life and fewer unscheduled indexings. For cast iron applications the chemistry and edge geometry promote stable chip formation, lowering the risk of built-up edge and helping to maintain surface finish between tool changes. This predictability translates into lower scrap rates and simplified process windows for shopfloor engineers and production planners. System compatibility that reduces setup time Configured with a rhombic 06 form and an 80° cutting angle, the insert fits conventional indexable holders and the TurnTenFeed system architecture, which comprises holders, interchangeable plates and spare parts. The plate features a 0.4 mm nose radius and a plate thickness of 2.38 mm, with a cylindrical hole plus a single-sided countersink (40°–60°) for positive clamping. These details support quick, repeatable indexings and secure seating in the pocket, reducing setup time and minimising runout. The net effect is a smoother changeover and fewer adjustments during batch production. Application scope and practical advantages Optimised specifically for turning and productive roughing, the insert performs well under stable fixturing and is particularly suited to cast iron components. The absence of a dedicated chipbreaker makes it preferable for operations where continuous chips are acceptable or when downstream chip handling is managed separately. As part of a matched tooling system, the insert supports consistent surface integrity and repeatable dimensional results, which is beneficial for manufacturers aiming for steady production output and predictable tool consumption rates. Contact Metav Werkzeuge for tailored application advice on the Tungaloy CCMW 060204 T5115 indexable insert and to discuss suitable holders and process parameters; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6862088 Manufacturer SKU: TUN6862088 SKU: 6862088-Tungaloy Model series: TurnTenFeed Core data Nose radius: 0.4 mm Cutting angle: 80° Clearance angle: 7° Plate thickness: 2.38 mm Plate size: 06 Features Material: carbide Coating: CVD-coated carbide Grade: T5115 Plate form: rhombic Hole: cylindrical hole + single-sided countersink (40°–60°) Chipformer: without Application: turning; high-feed roughing System: holders, indexable inserts and spare parts FAQ What materials is this insert suited for? The CCMW 060204 T5115 indexable insert (SKU 6862088-Tungaloy) is optimised for cast iron machining and performs well in general turning where the focus is on productive roughing. How does the coating affect tool life? The CVD-coated carbide grade T5115 provides improved wear resistance and a stable cutting edge, which supports predictable tool life for heavy roughing cycles with the CCMW 060204 insert. What are the key dimensional features to consider? Key dimensions include a 0.4 mm nose radius, 80° cutting angle and a 2.38 mm plate thickness; these factors influence cutting engagement and clamping compatibility for the indexable insert. Is the insert compatible with standard holders? The rhombic 06 form and the established TurnTenFeed geometry ensure compatibility with corresponding indexable holders designed for this insert family. Does this insert include a chipbreaker? This grade and geometry are supplied without a dedicated chipbreaker; the CCMW 060204 T5115 is therefore recommended where chip formation is manageable or when specific chip control is handled by the process setup. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMW 060208 T5115 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide durability, ISO-compatible geometry and a compact 0.8 mm corner radius for stable turning of cast iron; order the insert via Metav Werkzeuge or consult our specialists for application-specific recommendations. CCMW 060208 T5115 turning insert by Tungaloy — CVD-coated carbide, for turning CCMW 060208 T5115 is an ISO-standard rhombic indexable insert designed for external and internal turning, optimised for cast iron machining and versatile workshop use CVD-coated carbide for cast iron machining ISO-compatible rhombic insert 06 size 0.8 mm corner radius, 7° relief angle Countersunk hole mounting, 2.38 mm thickness Consistent, wear-resistant cutting for cast iron components The CVD-coated carbide grade T5115 offers a balanced combination of wear resistance and edge stability, making it suitable as a universal grade for Gusseisen (cast iron). The composition and coating process produce a hard surface layer that reduces flank wear in interrupted cuts and at elevated temperatures. For production environments where repeatable surface quality and predictable tool life matter, this insert provides a dependable basis for stable turning operations. The rhombic geometry and ISO conformity simplify tool planning and spare-part management while the compact corner radius supports fine finishing as well as medium-depth cuts. Reliable fit and quick tool changes for uninterrupted workflow Designed to the ISO series of turning indexable inserts, the geometry, relief angle and tolerance classes ensure compatibility with standard external holders and boring bars. The insert features a cylindrical hole with a one-sided countersink (40°–60°) for secure clamping; this mounting style reduces micro-movement under load and supports consistent repeatability after re-indexing. Clear specification of shape, thickness and fixation avoids ambiguity when matching inserts to holders and reduces setup time. For complex or bespoke holder systems, Metav Werkzeuge can advise on the correct clamping kit and replacement screws. Geometry that promotes stable chip behaviour and surface quality The modest 0.8 mm corner radius and 7° relief balance cutting strength with surface finish: the larger radius gives support to the cutting edge and helps damp vibration, while the relief angle prevents rubbing at the flank face. The supplied grade does not include an integrated chipbreaker, so the choice of a chip control geometry should be matched to the workpiece material and cutting parameters; for Gusseisen the T5115 grade typically provides predictable chip formation and a long interval between indexings. Understanding how radius and relief affect cutting forces helps to select feeds and depths that extend insert life and improve dimensional control. Lower tool complexity and better process economics Using a universal, CVD-coated grade such as this reduces the number of different grades required in a tool crib and simplifies order management. The ISO-standard form and small thickness (2.38 mm) make it suitable for compact holders and multi-tool turrets where space is limited. Over production runs, the combination of a stable cutting edge and CVD-layered wear protection can lower unit tooling costs through longer edge life and fewer unexpected changeovers. For planning retrofit or stock strategies, this insert supports a pragmatic balance between inventory breadth and process reliability. For tailored application advice or to request a quotation for the CCMW 060208 T5115 indexable insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6862075 Manufacturer SKU: TUN6862075 Stock SKU: 6862075-Tungaloy Facts Size: 06 Thickness: 2.38 mm Corner radius: 0.8 mm Relief angle: 7° Included angle: 80° Special features Material: carbide Grade/coating: T5115 (CVD-coated) Shape: rhombic (CCMW) Mounting: with hole; cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: none Application: turning (external and internal) ISO series: ISO turning indexable inserts FAQ Which materials is this insert best suited for? The CCMW 060208 T5115 insert is specified as a universal grade for cast iron, offering a balanced mix of wear resistance and edge stability for Gusseisen turning. How is the insert clamped in the holder? Clamping uses the cylindrical hole with a one-sided countersink (40°–60°); this style provides secure fixation in compatible ISO holders and supports repeatable indexing. Does the insert include a chipbreaker? The delivered geometry is without a chipbreaker; chip control should be achieved by selecting a suitable chipbreaker insert or optimising cutting parameters for the T5115 grade. What advantages does the T5115 CVD coating offer? T5115’s CVD coating enhances flank and crater wear resistance, improving edge life in cast iron applications and contributing to consistent surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com