CCMT 09T308 T9225 Wendeplatten - Tungaloy
Benefit from a robust combination of CVD-coated carbide grade T9225 and a 0.8 mm nose radius for reliable medium-to-heavy steel turning and stable performance under variable engagement. Order or check compatibility via Metav Werkzeuge if further advice is required. CCMT09T308 T9225 — ISO rhombic turning insert for medium-to-heavy steel by Tungaloy The CCMT09T308 T9225 is an ISO rhombic turning insert designed for external and internal turning operations in steel, offering a single-sided chipbreaker, CVD coating and suitability for interrupted cuts. ISO CCMT 09T308 geometry CVD-coated carbide grade T9225 0.8 mm nose radius for stable cuts With cylindrical hole and countersink Proven productivity and predictable tool life for steel turning The rhombic ISO geometry with an 80° included angle and 7° relief provides a predictable contact pattern, reducing vibration and improving surface finish during turning. The combination of CVD-coated carbide and the T9225 grade yields a balance of toughness and wear resistance, meaning fewer indexings and longer productive cutting periods in medium-to-heavy steel operations. For users who require repeatable cycle times and consistent part quality, this insert delivers measurable improvements in process reliability. System compatibility and secure clamping for stable machining Designed as an ISO-standard indexable plate, the insert fits holders that match form, relief angle, tolerance class, fixation and thickness. The plate thickness of 3.97 mm, cylindrical hole with one-sided countersink (40°–60°) and standard 09 size ensure secure seating and reliable clamping. Proper holder and insert pairing reduces micro-movement at the cutting edge, which in turn preserves the integrity of the cutting edge and maintains dimensional accuracy on turned components — a clear advantage for batch production and precision parts. Practical guidance for selection and machining Select the single-sided chipbreaker and the T9225 grade when operations involve varying engagement or lightly interrupted cuts that need added toughness. The 0.8 mm nose radius is optimised for a mix of surface finish and chip control; smaller radii favour fine finishing, larger radii favour heavy stock removal. Cutting parameters should be adapted to the material and rigidity of the setup: moderate speeds and feeds deliver the best compromise between tool life and productivity in typical steel applications. For less experienced planners, this insert simplifies process design through its universal performance profile. For reliable medium-to-heavy steel turning with Tungaloy’s T9225 grade, contact Metav Werkzeuge via info@metav-werkzeuge.com or +49 2822 7131930 to confirm holder compatibility and place an order. Technical data Article number: 6781140 SKU: 6781140-Tungaloy Manufacturer SKU: TUN6781140 Model series: ISO turning indexable inserts Manufacturer: Tungaloy Facts Nose radius: 0.8 mm Relief angle: 7° Plate thickness: 3.97 mm Plate size: 09 Included angle: 80° Hole style: cylindrical hole + one-sided countersink (40°–60°) Special features CVD-coated carbide Grade T9225 — robust universal grade for medium-to-heavy steel Rhombic (CCMT) plate form Single-sided chipbreaker ISO CCMT09T308 designation With hole for secure clamping Application: turning (external and internal) FAQ What materials is this insert suited for? The CCMT09T308 T9225 insert is optimised for medium-to-heavy steel turning; the T9225 grade offers toughness suited to variable engagement and lightly interrupted cuts. Is the CCMT09T308 compatible with standard ISO CCMT holders? Yes, the insert follows ISO CCMT geometry — compatibility depends on matching form, relief angle, tolerance and plate thickness to the holder. What is the advantage of the T9225 grade? Tungaloy’s T9225 grade combines toughness and wear resistance, making it suitable for productive steel machining where engagement conditions may change. How does the 0.8 mm nose radius affect machining? A 0.8 mm radius balances surface finish and edge strength; it improves stability for general turning tasks compared with a finer radius while still allowing decent surface quality. Does the insert include a chipbreaker and a clamping hole? Yes, the plate features a single-sided chipbreaker and a cylindrical hole with one-sided countersink for reliable clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 T9225 Wendeplatten - Tungaloy
Take advantage of a robust, CVD-coated carbide grade that balances toughness and wear resistance with a compact 0.8 mm corner radius and secure mounting for consistent production results; order the insert directly via Metav Werkzeuge or consult our advisors for holder compatibility. CCMT 09T308 T9225 — Turning insert (ISO CCMT09T308) by Tungaloy The CCMT09T308 T9225 is an ISO-standard rhombic turning insert designed for external and internal turning in medium to heavy steel applications. CVD-coated carbide grade T9225 for steel turning 0.8 mm corner radius for stable chip control Rhombic ISO CCMT09T308 form, 7° clearance Cylindrical hole with single-side countersink 40°–60° High-performance coating and grade for longer tool life The combination of a CVD-coated carbide substrate and the T9225 grade provides a dependable balance between wear resistance and toughness. In practical terms, the coating reduces abrasive wear while the carbide core maintains edge stability under moderate interruption, which means fewer insert changes and more productive machining cycles. The indexable insert is engineered for steel machining, so choosing this grade reduces the risk of premature flank wear and helps sustain consistent dimensional accuracy across batches. Geometry that enhances stability and surface quality The rhombic form with an included angle of 80° and a 0.8 mm corner radius delivers a compromise between cutting-edge strength and finish quality. A larger corner radius increases the effective cutting edge engagement, improving surface finish and tool life when turning heavier sections, while the 7° clearance helps avoid rubbing on the flank. The single-side chipbreaker controls chip formation for common turning operations, and the cylindrical hole with single-side countersink (40°–60°) secures the insert reliably in the clamping system, reducing vibration and improving repeatability. Practical system compatibility and application guidance Compatibility with holders is determined by form, clearance, tolerance class, mounting, size and thickness; the insert’s ISO CCMT09T308 designation and a thickness of 3.97 mm ensure interchangeability with standard CCMT toolholders. The single-side chipbreaker and the 0.8 mm corner make this insert suitable for stable external turning as well as internal boring where the holder offers sufficient support. For interrupted cuts or variable engagement, the CVD-coated carbide grade gives additional edge protection and toughness, supporting reliable cycle times and predictable reconditioning intervals. Contact Metav Werkzeuge for a tailored tooling recommendation based on the Tungaloy T9225 grade and CCMT09T308 geometry — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data Article number: 6781261 Manufacturer SKU: TUN6781261 SKU: 6781261-Tungaloy Model series: ISO turning indexable inserts ISO designation: CCMT09T308 Facts Corner radius: 0.8 mm Clearance angle: 7° Included angle: 80° Thickness: 3.97 mm Countersink angle: 40°–60° Plate size: 09 Special features CVD-coated carbide, grade T9225 Rhombic form (CCMT) Single-side chipbreaker Cylindrical hole with single-side countersink ISO‑standard turning insert for external and internal turning Compatible with CCMT holders and boring bars FAQ Which materials is this insert suitable for? The CCMT09T308 in T9225 is optimised for medium to heavy steel machining and performs reliably under slightly interrupted cuts where additional toughness is required. How does the CVD coating benefit the machining process? A CVD-coated carbide insert like the T9225 reduces abrasive wear on the cutting edge, extending tool life and maintaining consistent surface finish during prolonged turning operations. Can this insert be used for internal turning/boring? Yes; the rhombic geometry and 0.8 mm corner radius make the insert suitable for internal turning where the holder provides adequate support and the working conditions match the grade’s capabilities. What does the hole and countersink specification mean for clamping? The cylindrical hole with single-side countersink (40°–60°) secures the insert in standard CCMT clamping systems, improving stability and repeatability during machining. How to choose the right chipbreaker or holder for this insert? Select the chipbreaker and holder according to the workpiece material, required surface finish and the stability of the setup; the insert’s single-side chipbreaker is a versatile choice for many turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of robust CVD-coated carbide, precise 0.8 mm corner radius, and ISO compatibility for reliable turning performance; order genuine inserts via Metav Werkzeuge or consult our specialists for application advice. CCMT09T308 T9225 ISO turning insert by Tungaloy — rhomboid, 0.8 mm radius The CCMT09T308 T9225 is an ISO-standard indexable insert designed for general turning, offering a durable solution for medium to heavy steel machining. CVD-coated carbide for durability Universal grade for medium–heavy steel Rhomboid form with 80° included angle Cylindrical hole with countersink (40°–60°) Consistent cutting in medium to heavy steel The combination of CVD-coated carbide and the T9225 universal grade delivers robust performance when machining steel under variable engagement and slightly interrupted cuts. The coating enhances wear resistance and contributes to predictable tool life, while the substrate carbide ensures toughness where chip formation and impact occur. This yields improved process stability and reduces the frequency of insert changes, which is particularly beneficial in production environments requiring steady cycle times and repeatable surface quality. Precision fit and simple integration into ISO tooling Compatibility with standard toolholders is determined by form, 7° relief, tolerance class, fastening method, size and thickness. The rhomboid geometry with an 80° included angle, 0.8 mm corner radius and 3.97 mm thickness ensures a secure mechanical fit and consistent clamping. The insert’s cylindrical hole with a single-sided countersink (40°–60°) provides reliable seating and torque transmission when used with matching clamping sets and screws. Clear identification of these parameters simplifies the selection of the correct holder and minimises setup time. Practical benefits for workshop efficiency A dedicated indexable insert grade like this one offers economical tooling: fewer complete-tool replacements, predictable wear patterns and manageable inventory for common turning tasks. The single-sided chipbreaker supports controlled chip formation on typical steels, improving surface finish and reducing rework. When combined with standardised ISO interfaces, the insert supports fast changeovers and consistent results across shifts, contributing to overall process reliability and lower total machining cost. For specialist advice or to secure original Tungaloy inserts for production use, contact Metav Werkzeuge—our consultants provide application-matched recommendations and availability information. Technical data Article number: 6781052-Tungaloy Manufacturer SKU: TUN6781052 Manufacturer article number: 6781052 Model series: ISO-Drehwendeschneidplatten Facts Corner radius: 0.8 mm Relief angle: 7° Thickness: 3.97 mm Plate size: 09 Included angle: 80° Features Material: carbide Coating: CVD-coated Grade: T9225 Form: rhomboid Hole: cylindrical hole + single-side countersink (40°–60°) Chipbreaker: one-sided Application: turning System: ISO indexable inserts; compatibility via form, free angle, tolerance, fastening, size and thickness FAQ What materials is this insert suited for? The CCMT09T308 T9225 insert is a CVD-coated carbide grade formulated as a universal choice for medium to heavy steel machining and performs well under varying engagement and lightly interrupted cuts. How does the insert’s geometry affect performance? The rhomboid form with an 80° included angle and 0.8 mm radius offers a balance of strength and accessibility for external and internal turning, while the single-sided chipbreaker helps maintain stable chip control. Which holders are compatible with this ISO insert? Compatibility depends on holder form, 7° relief, tolerance class, fastening type, size and thickness—matching those parameters ensures proper seating and clamping for the indexable insert. Is the insert suitable for interrupted cutting or heavy cuts? Yes. The T9225 grade provides increased toughness for slightly interrupted cuts and medium–heavy cutting conditions, supporting reliable chip formation and tool life. What fastening arrangement does the insert use? The insert is supplied with a cylindrical hole and a single-side countersink (40°–60°) to match common ISO clamping systems and secure the insert in place. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 T9225 Wendeplatten - Tungaloy
Take advantage of a robust, CVD-coated cemented carbide grade that delivers consistent performance in medium to heavy steel turning; the hardened edge geometry and secure, countersunk hole ensure reliable clamping and stable chip control in interrupted cuts. Order the insert directly via Metav Werkzeuge or consult our team for application guidance. CCMT09T308 T9225 CCMT indexable insert for turning — Tungaloy CCMT09T308 T9225 is an ISO-standard rhombic indexable insert designed for medium to heavy-duty turning of steel with a one-sided chipbreaker. CVD-coated cemented carbide Robust universal grade T9225 Rhombic CCMT shape, 7° clearance 0.8 mm corner radius Cylindrical hole with countersink 40°–60° High-performance cutting with durable CVD-coated carbide The CVD-coated cemented carbide composition of this insert provides a balance of wear resistance and toughness that suits sustained metal removal. As a universal grade, T9225 is tailored for medium to heavy steel turning, offering resilience under slightly interrupted cuts and variable engagement conditions. The engineered coating reduces flank wear, prolonging effective tool life and enabling predictable tool-change intervals, which contributes directly to process reliability and cost-efficiency. Secure clamping and precise fit for stable machining Compliance with ISO form and dimensions ensures compatibility with standard holders when geometry, clearance and tolerance class match. The insert features a cylindrical hole with one-sided countersink (40°–60°), which facilitates secure clamping and repeatable seating in the pocket. The 7° clearance minimises rubbing on the flank face while the rhombic form with an 80° included angle supports both finishing and more aggressive turning without compromising stability. Optimised geometry for surface finish and strength A 0.8 mm corner radius provides a compromise between edge strength and surface quality: larger radii increase load capacity for heavy cuts, while smaller radii favour finer finishes. The plate thickness of 3.97 mm contributes to insert rigidity and resistance to chipping. The one-sided chipbreaker design assists chip control in common turning conditions; selecting the appropriate chipbreaker and insert grade according to workpiece stability and cutting parameters will improve machining consistency. Practical benefits for production environments Standardised ISO sizing and proven grade chemistry reduce tooling complexity at scale, simplifying inventory and tool selection. The insert’s combination of toughness and wear resistance supports longer tool life and fewer unexpected interruptions, which translates into reduced downtime and lower effective cutting costs. For job shops and production lines that require dependable performance in varied turning tasks, this solution balances productivity with long-term repeatability. For precise tool selection and availability of the Tungaloy CCMT09T308 T9225 insert, contact Metav Werkzeuge for tailored recommendations and order support at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6781480 Manufacturer article number: 6781480 SKU: 6781480-Tungaloy Facts Model series: ISO turning indexable inserts Designation: CCMT09T308 Size: 09 Plate thickness: 3.97 mm Corner radius: 0.8 mm Clearance angle: 7° Included angle: 80° Special features Material: cemented carbide Coating: CVD Shape: rhombic (CCMT) Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: one-sided Application: turning FAQ What workpiece materials is this insert suitable for? The CCMT09T308 T9225 insert is formulated for steel turning and performs well in medium to heavy cuts where toughness is required. How does the T9225 grade behave in interrupted cuts? T9225’s balanced toughness reduces the risk of chipping during slightly interrupted cuts, offering stable performance under variable engagement. Which holders are compatible with this insert? Compatibility depends on holder form, clearance, tolerance class, attachment method, size and thickness; ISO-standard external holders matching CCMT geometry are typically suitable. What advantage does the countersunk hole provide? The cylindrical hole with one-sided countersink (40°–60°) enables secure clamping and repeatable seating, improving rigidity and reducing vibration during turning. Can this insert be used for finishing as well as aggressive cuts? Yes; the rhombic CCMT form and 0.8 mm corner radius allow a balance between finish quality and edge strength, making it adaptable across finishing and more aggressive turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 T9225 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide and the robust T9225 grade to maintain productivity during medium to heavy Stahl turning; the ISO conformity and secure clamping features ensure repeatable results. Order the insert directly via Metav Werkzeuge or contact the consultants for compatibility advice. CCMT 09T308 T9225 – ISO turning insert by Tungaloy, CVD-coated carbide for medium to heavy Stahl machining The CCMT09T308 T9225 is an ISO rhombic turning insert engineered for reliable outer and inner turning in variable cutting conditions, offering a 0.8 mm corner radius and a one-sided chipbreaker for improved chip control. CVD-coated carbide grade T9225 Rhombic CCMT 09 insert, 0.8 mm radius One-sided chipbreaker for Stahl machining Cylindrical hole with 40°–60° countersink Consistent cutting performance for medium to heavy Stahl operations The combination of a CVD-coated carbide cutting material and the T9225 cutting grade provides a balance of hardness and toughness tailored to medium to heavy Stahl machining. This configuration supports interrupted cuts and variable engagement without sacrificing stability, which translates into fewer tool changes and more consistent cycle times. The one-sided chipbreaker helps direct chips away from the cutting zone, reducing risk of re-cutting and improving surface integrity. For production environments where changing workpiece conditions occur, this insert delivers predictable wear behaviour and repeatable dimensional control. Secure fit and repeatability with ISO conformity Designed to the ISO dimensions for rhombic turning plates, the insert ensures compatibility with standard indexable holders when matched by form, tolerance class, thickness and fastening. The 3.97 mm plate thickness and the 7° clearance angle contribute to a stable seating and effective rake geometry, while the cylindrical hole with one-sided countersink (40°–60°) enables secure clamping and precise location. These mechanical characteristics support high repeatability across tool changes and simplify inventory management by aligning with ISO toolholder systems, which is particularly beneficial for workshops seeking reduced setup times and improved process control. Practical application notes and handling benefits The 0.8 mm corner radius offers a compromise between edge strength and finish quality, making the insert suitable for general turning tasks where robustness is required without major sacrifices in surface condition. The insert form and one-sided chipbreaker should be matched to the chosen feed and depth of cut to optimise chip formation and evacuation. As part of a complete system—indexable insert, matching outside holder or boring bar, clamp plate and replacement screws—the component supports straightforward maintenance and rapid index changes. For mixed batches or repair work, the T9225 grade's versatility reduces the need for multiple specialised grades, improving tooling economy. For reliable supply and expert application support of this Tungaloy insert, contact Metav Werkzeuge and request guidance on holder compatibility or cutting parameters. Technical data Article number: 6781148 Manufacturer SKU: TUN6781148 SKU: 6781148-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Facts ISO designation: 09T308 Plate size: 09 Plate thickness: 3.97 mm Corner radius: 0.8 mm Clearance angle: 7° Included angle: 80° Special features Grade: T9225 Coating: CVD Plate form: rhombic Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: one-sided Application: Drehen FAQ What materials is this insert suitable for? The Tungaloy CCMT09T308 in grade T9225 is designed primarily for medium to heavy Stahl machining and performs reliably under variable engagement conditions. How does the 0.8 mm corner radius affect performance? A 0.8 mm corner radius on the CCMT09T308 provides a good balance between edge strength and surface finish, making it appropriate for general turning tasks with moderate feeds. Is this insert compatible with standard ISO holders? Compatibility depends on form, clearance angle, tolerance class, fastening and thickness; the ISO conformity of the plate supports use with standard ISO holders when matched correctly. What is the purpose of the one-sided chipbreaker? The one-sided chipbreaker on this insert improves chip control during turning, helping to direct chips away from the cutting zone and enhancing surface integrity. Which cutting grade should be chosen for interrupted cuts? The T9225 grade of the CCMT09T308 is formulated to offer additional toughness for interrupted or varying cuts, making it a practical choice for such conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide toughness, precise ISO geometry and secure clamping for consistent performance in medium to heavy steel turning. Order via Metav Werkzeuge or contact the consultants for tailored selection and compatibility checks. CCMT09T308 T9225 turning insert by Tungaloy — CVD-coated carbide for medium to heavy steel The CCMT09T308 is an ISO-standard rhomboid turning insert designed for external and internal turning in steel applications, offering a balance of toughness and wear resistance for intermittent and variable engagement conditions. CCMT09T308 rhomboid insert for turning CVD-coated carbide grade T9225 0.8 mm corner radius, 7° clearance angle Cylindrical hole with 40°–60° countersink Consistent cutting performance for medium to heavy steel The CVD-coated carbide grade T9225 provides a robust universal solution for the machining of medium to heavy steel, combining surface protection with substrate toughness to resist chipping under interrupted cuts. This coating technology increases edge life while maintaining the mechanical strength of the carbide body, which translates into fewer indexings and longer production runs. The result is improved process stability and predictable tool life, which supports productivity and reduces unplanned downtime in serial turning operations. Precise geometry and secure clamping for repeatable results The rhomboid geometry with an 80° included angle, 0.8 mm corner radius and 7° clearance angle yields a stable cutting edge that supports consistent surface finish and dimensional control. A plate thickness of 3.97 mm and the cylindrical hole with a single-side countersink (40°–60°) ensure secure seating in ISO-compatible holders, lowering the risk of movement under load. These geometric attributes facilitate predictable cutting forces and vibration damping, which benefits both roughing passes and finishing cycles by improving repeatability across batches. System compatibility and practical guidance for setup As an ISO-indexable insert, the component forms part of a complete system that includes a suitable external holder or boring bar, underlay/clamping set and replacement fixing screws; compatibility is determined by shape, clearance angle, tolerance class, fixing method, size and thickness. The single-sided chipbreaker is matched to general turning tasks but should be selected according to workpiece material and machining stability for optimal chip control. For complex or variable machining conditions the combination of a robust universal grade and the correct chipbreaker reduces the likelihood of edge failure and supports continuous operation with predictable outcomes. Metav Werkzeuge provides technical advice and compatibility checks for system selection. Contact Metav Werkzeuge for application-specific advice on the Tungaloy CCMT09T308 CVD-coated insert and to confirm holder compatibility; info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6781115 SKU: 6781115-Tungaloy Manufacturer SKU: TUN6781115 Facts Corner radius: 0.8 mm Clearance angle: 7° Included angle: 80° Plate thickness: 3.97 mm Plate size: 09 Special features Material: carbide Grade/coating: T9225, CVD-coated Plate form: rhomboid Hole: cylindrical hole + single-side countersink (40°–60°) Chipbreaker: single-sided Application: turning System: ISO-indexable insert, compatible holders and clamping sets FAQ What materials is this insert suited to machine? The CCMT09T308 with T9225 grade is intended primarily for medium to heavy steel machining and performs well under slightly interrupted cutting conditions. How does the CVD coating benefit tool life? A CVD-coated surface on the Tungaloy insert enhances wear resistance while preserving substrate toughness, which increases edge life and reduces the frequency of indexings for continuous turning. Which holders are compatible with this insert? Compatibility depends on holder form, clearance angle, tolerance class, fixing method, size and thickness; the CCMT09T308 is ISO-standard and fits holders designed for CCMT-format inserts. What does the plate hole specification mean for clamping? The cylindrical hole with a single-side countersink (40°–60°) provides a secure seating and reliable clamp engagement, supporting repeatable positioning under cutting loads. When should the single-sided chipbreaker be changed? The single-sided chipbreaker is suitable for general turning; selection should be reviewed when changing workpiece material, cut depth or if chip control issues arise during operation. Is this an original Tungaloy product and what is the SKU? This is an original Tungaloy turning insert, listed under SKU 6781115-Tungaloy (manufacturer SKU TUN6781115). Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 T9225 Wendeplatten - Tungaloy
CCMT09T308 T9225 Tungaloy-Wendeplatte zum Drehen | Tungaloy Die CCMT09T308 T9225 Tungaloy-Wendeplatte ist eine ISO-genormte Drehwendeschneidplatte für mittlere bis schwere Stahlbearbeitung und bietet robuste Zähigkeit bei wechselnden Schnittbedingungen. ISO-genormt, rhombische Form Robuste Sorte T9225 für Stahlbearbeitung Eckenradius 0,8 mm für präzisen Schnitt Mit Loch und einseitiger Senkung 40°–60° Einseitiger Spanbrecher für stabile Spanbildung Produktivität steigern durch wirtschaftliche Zerspanung Die Wendeplatte wurde entwickelt, um Produktionsprozesse wirtschaftlich zu gestalten und die Maschinenlaufzeit zu maximieren. Durch die Kombination aus Wirtschaftlichkeit und robuster Schneidstoffsorte ergibt sich eine verlässliche Performance bei Außen- und Innendrehen. Ein praxiserprobter Einsatzbereich ist die Serienfertigung von Stahlkomponenten, wobei die Platte unter wechselnden Eingriffsbedingungen stabile Ergebnisse liefert. Vorteil für Anwender: Höhere Ausbringung bei planbarer Standzeit. Material und Beschichtung für längere Standzeiten Die Wendeschneidplatte besteht aus Hartmetall mit CVD-Beschichtung, die eine harte, verschleißarme Oberfläche erzeugt. CVD steht für chemische Dampfabscheidung und sorgt für gute Haftung und Hitzebeständigkeit der Schicht. Daraus resultiert eine höhere Verschleißfestigkeit bei unterbrochenen Schnitten und bei Bearbeitung legierter Stähle. Ein technischer Nutzen ist die reduzierte Werkzeugwechselrate, was Stillstandzeiten im Fertigungsablauf minimiert. Passgenauigkeit und Anwendungshinweise für Halter Für optimale Ergebnisse ist die Kompatibilität zum Halter entscheidend; entscheidend sind Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke. Die Platte eignet sich für Außen- und Innendrehen; der einseitige Spanbrecher wurde für stabile Spanbildung bei mittleren bis schweren Schnitten ausgelegt. Beim Einbau empfehlen sich passende Unterlage, Klemmsatz und Ersatzschrauben, um Wiederholgenauigkeit und sichere Spannverhältnisse zu gewährleisten. Zielgruppe und Einsatzempfehlung Die Platte richtet sich an Lohnfertiger, Automobilzulieferer und industrielle Werkstätten, die produktive und robuste Schneidlösungen für Stahl benötigen. Besonderer Vorteil ist die universelle Einsetzbarkeit der Sorte T9225 bei variierenden Bearbeitungsbedingungen und leicht unterbrochenem Schnitt. Für Anwender, die eine zuverlässige Kombination aus Verschleißfestigkeit und Zähigkeit benötigen, ist diese Platte eine nachhaltige Wahl. Empfehlung: Die CCMT09T308 T9225 Tungaloy-Wendeplatte empfiehlt sich für produktive Stahlbearbeitung – bei Fragen oder Bestellanfragen bitte Kontakt zu Metav Werkzeuge aufnehmen: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 Produktmerkmale Artikelnummer: 6781205 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: CCMT09T308 T9225 Tungaloy-Wendeplatte Daten Eckenradius: 0,8 mm Plattendicke: 3,97 mm Freiwinkel: 7° Spitzenwinkel: 80° Plattengröße: 09 Besonderheiten Material: Hartmetall Beschichtung: T9225 (CVD-beschichtet) — CVD: chemische Dampfabscheidung Form: rhombisch Mit Loch: zylindrisches Loch + einseitige Senkung 40°–60° Spanbrecher: einseitig Anwendung: Drehen SKU Hersteller: TUN6781205 FAQ Für welche Werkstoffe eignet sich die Wendeplatte am besten? Die CCMT09T308 T9225 Tungaloy-Wendeplatte eignet sich primär für die Bearbeitung von Stahl und legiertem Stahl; die Sorte T9225 bietet Zähigkeit für leicht unterbrochene Schnitte und mittlere bis schwere Zerspanung. Wie beeinflusst die CVD-Beschichtung die Standzeit? Die CVD-Beschichtung der Platte erhöht die Verschleißfestigkeit und Hitzebeständigkeit, wodurch die Standzeit gegenüber unbeschichteten Schneiden bei vergleichbaren Bedingungen deutlich verbessert wird. Welche Rolle spielt der Eckenradius 0,8 mm? Der Eckenradius 0,8 mm sorgt für präzise Kantenausbildung und stabile Schnittkräfte, was zu gleichmäßigem Verschleißbild und verbesserten Oberflächengüten bei Bauteilen führt. Ist die Platte für innendrehende Anwendungen geeignet? Ja, die ISO-genormte CCMT09T308 ist für Außen- und Innendrehen ausgelegt; die rhombische Form und die Abmessungen ermöglichen vielseitigen Einsatz in entsprechenden Haltern. Welche Befestigungsmerkmale sind zu beachten? Beim Einsatz sind Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke des Halters zu prüfen; zusätzlich sollten passende Unterlagen, Klemmsätze und Ersatzschrauben verwendet werden, um sichere Spannverhältnisse zu gewährleisten. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CCMT 09T308 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide grade for toughness and an ISO-standard form that ensures straightforward compatibility with common holders; the result is reliable material removal in medium to heavy steel turning. Order directly via Metav Werkzeuge or consult the technical team for selection and holder matching. CCMT 09T308 T9225 – ISO turning insert (CVD-coated carbide, universal grade) by Tungaloy The CCMT 09T308 T9225 is an ISO-standard turning insert for general turning applications, engineered for consistent performance in medium to heavy steel machining and for use where variable cutting conditions demand additional toughness. CVD-coated carbide grade T9225 For medium to heavy steel machining Rhombic 80° insert with 7° clearance 0.8 mm corner radius, single-sided chipbreaker High-performance metal removal with consistent tool life The combination of a CVD-coated surface and a robust carbide substrate delivers a balance between wear resistance and toughness that suits intermittent cuts and variable engagement. The T9225 grade is designed for productive turning of medium to heavy steel, reducing flank wear under fluctuating loads and maintaining edge stability. As a consequence, cycle times remain predictable and tool-change frequency is lowered, which supports uninterrupted production runs and cost-effective machining. Secure clamping and ISO compatibility to reduce setup time Compatibility is governed by ISO form, clearance angle, tolerance class, attachment type, size and thickness; using an ISO-standard insert simplifies matching to widely used toolholders. The rhombic geometry with an 80° included angle and 7° clearance provides a stable seat in the pocket, while the central hole with cylindrical bore and one-sided countersink ensures repeatable clamping. These features reduce the time spent on setup checks and contribute to safer, more reliable turning operations. Optimised chip control and application versatility A single-sided chipbreaker tailored to the grade assists in forming manageable chips when machining steels, improving evacuation and surface finish. The insert’s 0.8 mm corner radius supports a balance between edge strength and attainable surface quality; larger radii increase robustness, while this radius still enables fine finishing passes. Designed as a universal option, the insert is suitable for external and internal turning where moderate to heavy material engagement occurs. Practical guidance for selection and use Choose cutting parameters and a chipbreaker variant compatible with the workpiece and machine rigidity; lower feeds and conservative depths are advised when entering interrupted cuts despite the increased toughness of the grade. The 3.97 mm thickness provides sufficient clamping support for stable cutting, and the rhombic form offers multiple effective cutting edges when indexed correctly. When in doubt about holder compatibility or parameter windows, consult data sheets or the technical documentation supplied with the insert. For precise matching of toolholder, cutting data and to order original Tungaloy CCMT 09T308 T9225 turning inserts, contact Metav Werkzeuge for specialist advice and rapid supply Technical data Article number: 6781190 SKU: 6781190-Tungaloy Manufacturer SKU: TUN6781190 Model series: ISO turning insert series Brand: Tungaloy Material: cemented carbide Facts Corner radius: 0.8 mm Thickness: 3.97 mm Insert size: 09 Clearance angle: 7° Included angle: 80° Special features CVD-coated carbide grade T9225 Rhombic insert form Central hole: cylindrical + one-sided countersink (40°–60°) Single-sided chipbreaker Application: turning (external and internal) Typical use: medium to heavy steel machining ISO-standardised geometry for holder compatibility FAQ What materials is this insert suitable for? The CCMT 09T308 T9225 turning insert is intended primarily for medium to heavy steel machining and performs well where intermittent cuts or variable engagement demand added toughness. How does the T9225 grade improve performance? The T9225 CVD-coated carbide offers a combination of wear resistance and toughness that maintains edge stability under fluctuating loads, extending useful tool life in demanding turning operations. Is the insert compatible with standard ISO holders? Yes; the insert follows ISO geometry parameters (form, size, thickness and hole style) so compatibility with matching ISO toolholders is straightforward when correct tolerance classes and clamping elements are used. What does the single-sided chipbreaker provide in practice? The single-sided chipbreaker assists in producing controllable chips and supports a better surface finish during steel turning, aiding chip evacuation and reducing the risk of built-up edge. Can this insert be used for finishing passes? With its 0.8 mm corner radius and balanced grade, the insert can be used for finishing where machine rigidity and cutting parameters are appropriate; finer radii or adjusted feeds may be chosen for higher surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T308 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide grade (T9225), robust 80° rhombic geometry and secure clamping to maintain stable chip formation and long tool life in medium-to-heavy steel turning; order directly via Metav Werkzeuge or consult the team for application-specific recommendations. CCMT 09T308 T9225 ISO turning insert for medium-to-heavy steel — Tungaloy CCMT09T308 T9225 is an ISO-standard indexable turning insert designed for external and internal turning in steel; the rhombic form and specific chipbreaker make it suitable where intermittent cuts demand higher toughness. CVD-coated carbide grade T9225 Robust universal grade for steel turning 80° rhombic geometry with 7° clearance Consistent cut quality under changing engagement conditions The CVD-coated carbide composition (T9225) provides a balance of hardness and toughness that supports reliable metal removal when cutting conditions vary. As a ISO-standard indexable insert, it was developed for medium-to-heavy steel turning and performs well in slightly interrupted cuts where a tougher grade is needed. The single-sided chipbreaker promotes controlled chip formation, reducing the risk of built-up edge and improving surface finish; at the same time the robust substrate helps to resist crater wear, extending productive tool life. Compatibility with holders depends on form, clearance angle, tolerance class, fastening method, size and thickness. Higher productivity with predictable tool life and secure clamping Designed for productive machining, the geometry and dimensions contribute directly to process stability: the 80° rhombic shape enables versatile cutting angles, the 0.8 mm corner radius increases edge strength for heavier cuts, and the plate thickness (3.97 mm) combines stiffness with economical use of insert material. The centre hole is cylindrical with a single-sided countersink (40°–60°) for secure mounting and repeatable positioning, which lowers setup variability and supports higher material removal rates. These measurable features translate into fewer tool changes and lower downtime in batch production. Easy integration into existing tool systems and selection guidance As part of the ISO turning insert series, the indexable plate integrates into common external holders or boring bars when the form, fastening and size are matched. When selecting a chipbreaker and grade, choose the variant that suits the workpiece material, machining strategy and lathe-spindle stability; for mixed or interrupted cuts, a tougher universal grade such as T9225 reduces the likelihood of chipping. For specific holder compatibility or to optimise the chipbreaker selection, Metav Werkzeuge can advise on matching the insert to the clamping set and replacement screws supplied with typical toolholders. Contact Metav Werkzeuge for tailored advice on Tungaloy turning solutions and to specify the CCMT09T308 T9225 for reliable medium-to-heavy steel turning—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6780680 SKU: 6780680-Tungaloy Manufacturer SKU: TUN6780680 Model series: ISO-Drehwendeschneidplatten Shape designation: CCMT09T308 Manufacturer: Tungaloy Facts Angle: 80° Clearance: 7° Thickness: 3.97 mm Corner radius: 0.8 mm Size: 09 ISO code: 09T308 Special features CVD-coated carbide grade T9225 Rhombic insert form Cylindrical hole with single-sided countersink (40°–60°) Single-sided chipbreaker ISO-standard indexable turning insert series Suitable for external and internal turning Robust universal grade for medium-to-heavy steel FAQ What materials is this insert suitable for? The CCMT09T308 T9225 insert is formulated as a robust universal grade for steel machining and is intended for medium-to-heavy turning operations where toughness is required. How does the chipbreaker influence performance? The single-sided chipbreaker promotes stable chip formation under varying engagement conditions; with the T9225 composition, it helps maintain surface finish and reduces the risk of built-up edge during interrupted cuts. Which holders are compatible with this insert? Compatibility depends on the holder’s form, clearance angle, tolerance class, fastening and insert size; the ISO series designation facilitates matching to standard external holders and boring bars. What does the centre hole configuration mean for clamping? The cylindrical centre hole with a one-sided countersink (40°–60°) ensures secure, repeatable clamping and simplifies positional accuracy when fitted to matching screws and clamp sets. Is this an original Tungaloy product and what is the SKU? Yes, the part is an original Tungaloy indexable insert, manufacturer article number 6780680 and SKU 6780680-Tungaloy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T312 AH6225 Wendeplatten - Tungaloy
Benefit from a combination of PVD-coated carbide AH6225 and a 1.2 mm nose radius for stable, versatile medium turning operations; order the insert directly via Metav Werkzeuge or contact our consultants for holder compatibility and application advice. CCMT 09T312 AH6225 Tungaloy indexable insert — ISO turning insert for stainless steels, PVD-coated carbide The CCMT09T312 AH6225 is an ISO-standard indexable turning insert designed for external and internal turning, offering a sharp yet robust cutting edge suited to medium machining of stainless steels. PVD-coated carbide AH6225 grade Universal for stainless steels 1.2 mm nose radius for versatility Rhombic 80° profile with hole Consistent cutting performance for medium turning The insert combines a PVD-coated surface with a carbide substrate to deliver consistent edge stability during variable conditions. The AH6225 grade is formulated as a universal option for stainless steels, giving a balance between a sharp cutting edge and wear resistance for medium cutting depths. This results in reliable cycle times and predictable tool life, which supports efficient turnover in batch and jobbing environments. Predictable seating and secure clamping with ISO compatibility Constructed to the ISO designation 09T312, the plate’s rhombic geometry and precise tolerances ensure compatibility with ISO turning holders when the form, relief angle, tolerance class, fastening method, size and thickness match. The insert has a cylindrical hole with a single-side countersink (40°–60°) which facilitates stable clamping and repeatable positioning. Clear specification of these mounting details reduces set-up time and helps avoid seating errors that could affect concentricity or surface finish. Versatility and process benefits for surface finish and stability A 1.2 mm nose radius paired with a single-sided chipbreaker provides a compromise between strength and surface quality: the radius allows secure cutting edge engagement, while the chipbreaker promotes controlled chip formation during turning. The 80° rhombic profile improves access for general-purpose turning and supports good surface integrity on external contours. For applications where medium machining and changing conditions are common, this Tungaloy insert helps maintain productivity with consistent results. If further technical data or clarification is required, Metav Werkzeuge can provide holder compatibility advice and detailed application parameters via email at info@metav-werkzeuge.com or by phone on +49 2822 7131930. For reliable performance with the Tungaloy AH6225 grade and to confirm holder compatibility, contact Metav Werkzeuge for an application-specific recommendation and ordering assistance. Technical data Article number: 6903266 Manufacturer SKU: TUN6903266 SKU: 6903266-Tungaloy Model series: ISO indexable turning inserts ISO designation: 09T312 Core data Nose radius: 1.2 mm Cutting edge angle: 80° Relief angle: 7° Plate thickness: 3.97 mm Size: 09 Special features PVD-coated carbide Grade: AH6225 (universal for stainless steels) Rhombic plate form Single-sided chipbreaker With cylindrical hole and single-side countersink (40°–60°) Intended use: turning (external and internal) Compatibility: ISO-standard holders when form, angle, tolerance and fastening match FAQ What material is this insert best suited to? The CCMT09T312 AH6225 insert is designed as a universal grade for stainless steels, offering a balance of sharpness and edge stability suitable for medium turning. How does the AH6225 coating benefit machining? The PVD-coated AH6225 grade increases wear resistance and helps maintain a sharp cutting edge under changing conditions, improving process stability with the Tungaloy insert. Which holders are compatible with this ISO insert? Compatibility depends on holder form, relief angle, tolerance class, fastening method, size and thickness; the insert is ISO-standard and fits compatible ISO turning holders when those parameters match. What does the hole style mean for clamping? The cylindrical hole with single-side countersink (40°–60°) provides secure and repeatable seating, improving clamping stability and concentricity in turning operations. Is this insert suitable for both external and internal turning? Yes, the geometry and 1.2 mm nose radius make the insert versatile for both external and internal turning tasks in medium machining regimes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T312 AH6235 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide performance, an 1.2 mm nose radius for accurate profiling, and a rhombic plate geometry that ensures secure clamping and stable machining; order the insert directly via Metav Werkzeuge or consult the team for application support. CCMT09T312 AH6235 Tungaloy indexable insert — PVD-coated carbide, 1.2 mm nose radius The CCMT09T312 AH6235 Tungaloy insert is a rhombic ISO turning insert designed for external and internal turning operations, optimised for stainless steels and interrupted cuts. PVD-coated carbide AH6235 for stainless steels 1.2 mm nose radius for accurate profiles Single-sided chipbreaker for interrupted cuts Central hole with 40°–60° countersink for secure clamping Stable machining and improved edge life with a PVD-coated grade The combination of a PVD-coated surface and the AH6235 carbide matrix provides enhanced edge stability and wear resistance when machining stainless steels and other demanding alloys. The coating reduces built-up edge and improves heat resistance, which translates directly into longer tool life and fewer insert changes per shift. As an ISO-design insert, compatibility with holders depends on shape, clearance, tolerance class, fastening method, size and thickness; this standardisation helps maintain consistent process parameters and repeatable results across production batches. Secure clamping and geometry that supports productivity The rhombic plate form with an 80° included angle, central hole and a cylindrical hole plus one-sided countersink (40°–60°) ensures a secure and repeatable clamping interface. The plate thickness of 3.97 mm and the 1.2 mm nose radius balance robustness with profile accuracy: the nose radius increases edge strength for interrupted cuts while still allowing fine surface finishes when set-up and feeds are adjusted accordingly. The single-sided chipbreaker is optimised for chip control under varying stability conditions, reducing chatter risk and contributing to a smoother production flow. Measurable process benefits and recommended applications Selecting the AH6235 grade with this insert typically improves process security on jobs involving interrupted cuts, work-hardening stainless alloys or operations with an increased risk of chipping. The insert is intended for both external and internal turning and is best used with a matched holder, shim and clamp set; a complete system comprising insert, compatible external holder or boring bar, underlay/clamp set and spare screws achieves the most reliable results. By choosing the correct chipbreaker and grade for the workpiece material and machining stability, the productivity gains become quantifiable through reduced downtime and fewer insert replacements. For robust stainless-steel turning using the Tungaloy AH6235 grade, contact Metav Werkzeuge for application advice and availability: info@metav-werkzeuge.com, +49 2822 7131930. Technical data Article number: 6903451 SKU: 6903451-Tungaloy Manufacturer SKU: TUN6903451 Designation: CCMT09T312 AH6235 Model series: ISO turning indexable inserts Facts Nose radius: 1.2 mm Plate thickness: 3.97 mm Included angle: 80° Relief angle: 7° Plate size: 09 Special features Material: carbide Coating: PVD Grade: AH6235 — tougher grade for stainless steels and interrupted cuts Plate form: rhombic Chipbreaker: single-sided Hole style: cylindrical hole + one-sided countersink (40°–60°) Typical application: external and internal turning System components: insert + external holder or boring bar + shim/clamp set + spare screws FAQ What materials is this insert best suited for? The CCMT09T312 AH6235 Tungaloy insert is optimised for stainless steels and similar alloys, and it performs well in interrupted cutting conditions thanks to the tougher AH6235 grade. How does the plate geometry support stable clamping? The rhombic plate form with a central cylindrical hole and a 40°–60° countersink on the CCMT09T312 ensures secure, repeatable clamping and helps to reduce vibration during machining. Which nose radius should be expected and what does it deliver? The insert features a 1.2 mm nose radius, providing a compromise between edge strength for interrupted cuts and the ability to produce accurate profiles and acceptable surface finishes. Can this insert be used for internal turning operations? Yes — the ISO format and geometry of the plate make it suitable for both external and internal turning when paired with the appropriate boring bar or holder. How should the chipbreaker selection be approached? Choose the chipbreaker to match the workpiece material, cutting mode and machine stability; the CCMT09T312 comes with a single-sided chipbreaker designed to manage chips effectively in less-stable or interrupted-cut scenarios. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T312 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of PVD‑coated carbide AH725, ISO conformity and a 1.2 mm corner radius for stable, predictable turning results. Order the CCMT09T312 AH725 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if further machining advice is required. CCMT 09T312 AH725 — ISO turning insert for external and internal turning (Tungaloy) The CCMT 09T312 AH725 is an ISO‑standard, rhombic turning insert engineered for reliable external and internal turning where consistent chip control and process security are required. PVD-coated carbide AH725 Universal, crack‑resistant grade for steel Rhombic 80° geometry with 1.2 mm radius Single-sided chipbreaker, with centre hole Consistent performance for mixed-material turning The combination of a PVD‑coated carbide substrate and the AH725 grade delivers a balance of wear resistance and fracture toughness suited to variable workshop conditions. This universal grade was developed for applications that switch between steel and stainless steel, offering stable chip formation and extended edge life under interrupted cuts. The coating reduces built-up edge and improves surface finish, while the core carbide supports repeated regrinds and predictable tool life. Such properties translate into fewer tool changes and higher uptime on medium‑duty turning operations. Secure clamping geometry for reproducible results The rhombic 80° geometry and a 1.2 mm corner radius provide a robust contact area that reduces vibration in small‑to‑medium tooling set‑ups. The ISO specification ensures interchangeability with holders that match form, relief angle, tolerance class, fixation and thickness; the insert’s 7° relief angle and 3.97 mm thickness enable straightforward seating in standard CCMT pockets. A cylindrical hole with a single‑side countersink (40°–60°) secures the insert centrally, while the single‑sided chipbreaker manages chips on a wide range of feeds. These characteristics contribute to reproducible surface quality and consistent cycle times on both external and internal turning. Practical selection and machining advice for dependable results For tasks requiring process security—small‑diameter turning, mixed batches or light interrupted cuts—choose the chipbreaker and grade to match workpiece stability and feed rate rather than maximum cutting speed. The AH725 grade is particularly suitable where a combination of toughness and edge integrity is needed; pairing this with the correct holder and clamping set avoids instability. When optimising a turning process, consider spindle power, tool overhang and coolant strategy: the right setup amplifies the insert’s advantages in chip control and edge life, reducing rework and increasing productivity. For tailored recommendations on genuine Tungaloy CCMT 09T312 AH725 turning inserts and assistance with holder compatibility, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 6856700 Manufacturer SKU: TUN6856700 SKU: 6856700-Tungaloy Model series: ISO turning inserts Designation: CCMT09T312 AH725 Material: carbide Coating: PVD Facts Size: 09 Thickness: 3.97 mm Included angle: 80° Relief angle: 7° Corner radius: 1.2 mm Hole style: cylindrical hole with single‑side countersink (40°–60°) Special features Rhombic insert shape Single‑sided chipbreaker Universal, crack‑resistant grade for steel and stainless steel Centre hole for positive clamping Typical application: external and internal turning FAQ Is this insert suitable for stainless steel machining? Yes. The CCMT09T312 AH725 Tungaloy insert is designed as a universal, crack‑resistant grade particularly effective for both steel and stainless steel machining. Which holders are compatible with this insert? Compatibility depends on holder form, relief angle, tolerance class, fixation and thickness; the insert follows ISO CCMT standards for use with matching rhombic turning holders. What advantage does the PVD coating offer? The PVD coating on the AH725 grade reduces built‑up edge and wear, improving surface finish and extending edge life in mixed‑material turning tasks. How does the single‑sided chipbreaker affect performance? The single‑sided chipbreaker provides controlled chip formation over a range of feeds, which helps maintain stable cutting forces and predictable surface quality. Can the insert be used for interrupted cuts and small tools? Yes. The AH725 grade’s fracture resistance and the insert’s robust geometry make it suitable for interrupted cuts and smaller‑scale turning operations where process security is important. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T312 T5115 Wendeplatten - Tungaloy
Take advantage of the CVD-coated cemented carbide grade T5115 and the CCMT 80° rhombic geometry with a 1.2 mm corner radius for consistent chip control and edge stability in cast-iron turning; order directly via Metav Werkzeuge or consult their specialists for application advice. CCMT 09T312 T5115 — Indexable insert for turning by Tungaloy A CCMT 09T312 T5115 indexable insert designed for general turning operations, offering a balanced combination of wear resistance and cutting-edge stability for cast-iron machining. CVD-coated cemented carbide T5115 80° rhombic form with 7° clearance angle Optimised for cast-iron turning Cylindrical hole with single-side countersink Robust coating and substrate for longer tool life The CVD coating on a cemented carbide substrate provides a hard, wear-resistant surface while retaining a tough core to resist chipping. This combination delivers a clear production benefit: longer periods between insert changes and fewer unplanned stoppages. For many turning tasks, the T5115 grade offers an optimal compromise between wear resistance and edge stability, which helps maintain dimensional accuracy and surface finish over extended runs. CVD technology deposits layers that adhere strongly to the substrate, reducing adhesive wear and improving heat resistance during high-temperature cutting cycles. Geometry designed for reliable chip control and clamping The 80° rhombic CCMT geometry with a 1.2 mm corner radius and 7° clearance angle yields a versatile cutting profile suited to both light finishing and heavier roughing when combined with the correct chipbreaker. The insert’s cylindrical hole with single-side countersink (40°–60°) ensures secure clamping in compatible holders and stable orientation under load. As the ISO series compatibility depends on form, clearance, tolerance, clamping and thickness, pairing the insert with a matched holder and the right chipbreaker produces predictable chip formation and reduced vibration, resulting in improved surface quality and repeatable component tolerance. Practical selection and system integration for production environments This insert is part of the ISO turning insert system and is supplied with a thickness of 3.97 mm and a plate size designation of 09, enabling straightforward replacement in standard indexable-holder setups. Select the one-sided chipbreaker and the T5115 grade specifically for cast-iron applications to benefit from optimised chip control and consistent tool life. Compatibility is determined by the insert form, clearance angle, tolerance class, fixing style, size and thickness; when these factors are matched, the system—insert, holder, clamp and fastening screw—delivers stable machining and predictable process performance in series production. For reliable cast-iron turning with proven CVD performance, contact Metav Werkzeuge for the Tungaloy CCMT09T312 T5115 insert and tailored application support via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6864741 Manufacturer SKU: TUN6864741 SKU: 6864741-Tungaloy Label: CCMT09T312 T5115 Tungaloy-Wendeplatte Facts Model series: ISO-Drehwendeschneidplatten Material: Hartmetall (cemented carbide) Coating: CVD-coated Application: Drehen (turning) Plate form: rhombic, 80° Plate size: 09 Plate thickness: 3.97 mm Corner radius: 1.2 mm Clearance angle: 7° Hole: with hole; cylindrical hole + single-side countersink (40°–60°) Special features Grade: T5115 — universal for cast iron Chipbreaker: one-sided System components: ISO insert, matching external holder or boring bar, shim/clamp set, replacement screws Compatibility determined by form, clearance, tolerance, fixing, size and thickness FAQ What materials is this insert best suited for? The T5115 grade is optimised for cast-iron applications; the CCMT geometry and CVD-coated cemented carbide substrate provide balanced wear resistance and edge stability for consistent performance in grey and nodular cast iron turning. How does the CVD coating improve performance? CVD coating on the cemented carbide insert reduces adhesive and abrasive wear, increases thermal resistance and extends the effective cutting life of the Tungaloy CCMT09T312 insert under typical turning conditions. Which holder types are compatible with this insert? Compatibility depends on the ISO form, clearance angle, tolerance class, fixing style, size and thickness; the CCMT09T312 fits standard ISO external turning holders and boring bars designed for CCMT inserts with matching clamping and thickness. What is the purpose of the cylindrical hole with countersink? The cylindrical hole combined with a single-side countersink (40°–60°) ensures secure mechanical fixing, repeatable seating and correct orientation in the clamping system, contributing to stable cutting and accurate repeatability. How should the chipbreaker and grade be selected for different operations? Choose the one-sided chipbreaker and the T5115 grade for cast-iron turning; for other materials or alternative machining strategies, select a chipbreaker and grade that match the workpiece material, cutting data and machine/fixture stability to achieve the desired chip formation and surface finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T312 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide, a 1.2 mm corner radius and reliable chip control for continuous turning operations; order directly via Metav Werkzeuge or request advice from our consultants for optimal integration into existing tool systems. CCMT 09T312 T6215 – Tungaloy indexable insert for turning (CVD-coated carbide, 1.2 mm radius) The CCMT09T312 T6215 is an ISO-standard rhombic indexable insert designed for precise external and internal turning, especially suited to rostfreier Stahl under stable to mildly interrupted cutting conditions CVD-coated carbide for high wear resistance 1.2 mm corner radius for robust finishes Rhombic ISO 09 geometry, 80° shape Cylindrical hole with 40°–60° countersink Optimised performance for rostfreier Stahl turning The CVD-coated grade T6215 delivers wear resistance and consistent cutting behaviour when machining rostfreier Stahl, reducing the frequency of insert changes and unplanned downtime. This indexable insert combines a hard coating with a tough carbide substrate to balance edge stability and longevity, giving a measurable improvement in productive cutting time. Choosing this grade supports predictable tool life under stable or lightly interrupted conditions and contributes to lower unit costs through fewer replacements. Secure clamping and precise geometry for consistent surface quality A carefully defined geometry ensures repeatable results: the 1.2 mm corner radius helps avoid premature flank wear while maintaining acceptable surface finish and strength at the cutting edge. The insert’s rhombic form with an 80° shape and a 7° relief angle stabilises contact with the workpiece and simplifies seat alignment in indexed holders. The cylindrical hole with single-sided countersink (40°–60°) ensures reliable clamping force and repeatability, while the 3.97 mm thickness contributes to stiffness during heavy cuts. These characteristics reduce vibration and support consistent dimensional accuracy across batches. Economic advantages and system compatibility for production environments Operating to ISO standards, this insert integrates into common insert-holding systems where compatibility depends on form, relief angle, tolerance class, fastening, size and thickness. The grade’s balanced substrate and coating promote stable chip formation and longer tool life, which in turn lower tool-change frequency and increase overall throughput. When used as part of a complete system—insert, appropriate external holder or boring bar, clamp set and replacement screws—the result is a predictable machining process that supports both small-batch flexibility and sustained serial production. For practical advice on integrating the Tungaloy CCMT09T312 into production or to arrange supply, contact Metav Werkzeuge – call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: 6903078 Manufacturer SKU: TUN6903078 SKU: 6903078-Tungaloy Model series: ISO indexable turning inserts Core data Corner radius: 1.2 mm Insert size: 09 Shape angle: 80° Relief angle: 7° Thickness: 3.97 mm Design / Special features Material: carbide Coating: CVD Grade: T6215 Rhombic insert (ISO 09) One-sided chipbreaker Cylindrical hole + single-sided countersink (40°–60°) Application: turning of rostfreier Stahl Compatibility determined by shape, relief angle, tolerance class, fastening, size and thickness FAQ Which materials is this insert intended for? The Tungaloy CCMT09T312 in grade T6215 is designed primarily for machining rostfreier Stahl, offering a balance of wear resistance and edge stability for that material class. Can the insert be used for internal turning operations? Yes, the ISO rhombic geometry and available holder systems make the insert suitable for both external and internal turning tasks when mounted in an appropriate boring bar or holder. What are the key dimensions to check before ordering holders? Check corner radius (1.2 mm), insert size (09), thickness (3.97 mm), relief angle (7°) and the 80° shape to ensure the holder matches the insert’s seating and clamping requirements. How does the hole and countersink affect clamping? The cylindrical hole with a single-sided countersink (40°–60°) provides precise centring and secure fastening in compatible clamping systems, improving repeatability and resistance to cutting forces. Is the insert supplied as part of a system or individually? The CCMT09T312 is supplied as an indexable insert; a matching external holder or boring bar, clamp set and replacement screws are required for a complete system and must be selected to the ISO seat specifications Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T312 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide T9215, reliable edge security and ISO compatibility for efficient medium-steel turning; order through Metav Werkzeuge or consult our specialists for technical matching and availability. CCMT 09T312 T9215 — CCMT turning insert for turning by Tungaloy A CCMT 09T312 T9215 indexable turning insert designed for medium-steel applications, suitable for both external and internal turning where stable chip control and high productivity are required. CVD-coated carbide grade T9215 Optimised for medium steel machining 80° approach angle for stable cutting Single-sided chipbreaker with cylindrical hole Enhanced productivity through durable cutting material The combination of CVD-coated carbide and the T9215 grade provides high wear resistance while maintaining edge security, making this insert a dependable choice for prolonged runs. The material selection supports continuous and light interrupted cuts, which helps to reduce downtime for insert changes and increases overall process throughput. The design objective is improved tool life and consistent surface finish when machining commonly used steels, translating technical properties into measurable production gains. Geometry designed for stability and chip control The rhombic, 80° insert form with a 1.2 mm corner radius delivers predictable cutting forces and robust contact with the workpiece, while the 7° relief angle minimises rubbing and heat build-up. The insert thickness of 3.97 mm and the central cylindrical hole with a one-sided countersink (40°–60°) ensure secure clamping and repeatable seating in ISO holders. The single-sided chipbreaker is tailored for medium-steel applications and promotes consistent chip control, reducing the risk of entanglement and improving surface quality on both external and internal turning passes. Practical system considerations and straightforward integration This is an ISO-compliant indexable insert intended to be used within a complete holder system consisting of a compatible external holder or boring bar, a shim/clamping kit and matching screws. Compatibility depends on holder form, relief angle, tolerance class, fastening method, size and thickness; selecting the correct chipbreaker and grade for the workpiece and cutting conditions is essential for maximising performance. If the exact cutting parameters are unclear, technical consultation is recommended to ensure optimal feed, speed and stability for the machining task. For tailored advice or to confirm availability of the CCMT 09T312 T9215 turning insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt, application-oriented support. Technical data Article number: 6772441 Manufacturer article number: 6772441 Manufacturer SKU: TUN6772441 SKU: 6772441-Tungaloy Manufacturer: Tungaloy Model series: ISO indexable turning inserts Facts Corner radius: 1.2 mm Relief angle: 7° Insert size: 09 Thickness: 3.97 mm Approach angle: 80° Hole configuration: cylindrical with one-sided countersink 40°–60° Design and features Rhombic 80° insert form CVD-coated carbide grade T9215 Single-sided chipbreaker Compatible with ISO turning holders for external and internal turning Cylindrical hole and countersink for secure clamping Intended for medium steel machining, continuous to light interrupted cuts FAQ What materials is this insert best suited for? The CCMT 09T312 T9215 insert from Tungaloy is optimised for medium steel machining; the CVD-coated carbide composition offers a balance of wear resistance and fracture toughness for continuous and lightly interrupted cuts. How can I check compatibility with an existing holder? Compatibility is determined by holder form, relief angle, tolerance class, fastening, size and thickness; the ISO designation 09T312 helps to identify matching external holders and boring bars for secure clamping. Which operations are recommended for this insert? The insert is designed for external and internal turning operations and performs well in standard finishing and medium-depth roughing where chip control and consistent edge life are required. What chip control can be expected with this chipbreaker? The single-sided chipbreaker is tailored for medium-steel applications and provides reliable chip formation and evacuation, reducing the likelihood of chip interference and supporting stable cutting conditions. Are there additional components required for installation? A complete system includes a suitable ISO turning holder or boring bar, a shim or clamping kit and replacement screws; these components ensure correct seating and repeatable performance of the CCMT 09T312 T9215 insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 09T312 T9225 Wendeplatten - Tungaloy
Combine the robust CVD-coated carbide grade T9225 with a 1.2 mm corner radius and secure clamping to achieve consistent performance in medium-to-heavy steel turning; order the CCMT09T312 via Metav Werkzeuge or consult their specialists for tailored tool selection and delivery. CCMT 09T312 T9225 turning insert — CVD-coated carbide, 1.2 mm corner radius (Tungaloy) CCMT09T312 T9225 is a CVD-coated carbide indexable insert designed for medium-to-heavy turning of steel, offering a balance of toughness and wear resistance for interrupted cuts and varying engagement conditions. CVD-coated carbide for high wear resistance Robust grade for medium to heavy steel 1.2 mm corner radius for edge strength Rhombic ISO CCMT09 form, with hole Maximised productivity for steel turning The CVD-bonded carbide composition of this grade delivers a controlled mix of hardness and toughness: T9225 is specified for medium-to-heavy steel turning, where variable cutting conditions and light interruptions demand greater edge resilience. The combination of coating and grade reduces flank wear and extends tool life under higher contact loads, which translates into fewer index changes and increased uptime. Productivity gains arise from steady cutting performance and a lower incidence of catastrophic edge failure, making the solution well suited for serial production and mixed-batch machining where consistent cycle times matter. Secure cutting edge and controlled chip flow Chip control is managed by the one-sided chipbreaker geometry and the insert’s rhombic form; this directs chips away from the cutting zone and supports stable cutting forces. The 1.2 mm corner radius reinforces the edge against shock, while the 7° clearance angle reduces rubbing on the flank face to preserve surface finish. The insert’s 80° included angle provides favourable strength for turning operations that require robust support at the cutting edge. Together, these features help maintain dimensional stability and surface quality with fewer tool changes, and they simplify explanations of technical trade-offs for teams less familiar with indexable insert technology. Simple compatibility and practical mounting The CCMT format follows ISO sizing conventions, here supplied as CCMT09T312, with a plate thickness of 3.97 mm and a rhombic shape that suits common clamping systems. Compatibility with a given holder is determined by the holder form, free/clearance angle, tolerance class, fastening method, size and thickness; the included cylindrical hole with one-sided countersink (40°–60°) ensures secure seating and straightforward replacement. Typical system components include the ISO insert, a matching external holder or boring bar, a locating shim or clamp set and replacement screws — a standardised approach that reduces stocking complexity and shortens machine downtime. Contact Metav Werkzeuge for application consulting, cutting data recommendations and availability of the Tungaloy T9225 grade; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6781040 Manufacturer SKU: TUN6781040 Label: CCMT09T312 T9225 Tungaloy-Wendeplatte Core dimensions Corner radius: 1.2 mm Thickness: 3.97 mm Included angle: 80° Clearance angle: 7° Plate size: 09 Design and features Material: carbide Coating: CVD Grade: T9225 Chipbreaker: one-sided Hole: with hole — cylindrical hole + one-side countersink (40°–60°) Shape: rhombic Model series: ISO turning inserts Application: turning FAQ What materials is this insert suitable for? The CCMT09T312 T9225 insert is optimised for steel machining and performs well in medium-to-heavy cutting situations where toughness and wear resistance are required. How does the T9225 grade behave with interrupted cuts? Tungaloy’s T9225 grade offers increased toughness and stable chip formation, making it resilient under light interruptions common in turning operations. What should be checked for holder compatibility? Confirm holder form, free/clearance angle, tolerance class, fastening style, size and thickness; these determine mechanical fit and safe clamping of the CCMT09T312 insert. Does the insert require special clamping hardware? The rhombic CCMT form with a cylindrical hole and countersink fits standard ISO clamping systems; matching shims and screws are recommended to ensure repeatable seating. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 120404 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated cemented carbide grade optimised for stainless steel and the ISO CCMT form for consistent turning performance; the stable, sharp cutting edge and dedicated chipbreaker ensure reliable medium‑duty machining. Order directly via Metav Werkzeuge or consult our specialists for application support. CCMT120404 AH6225 Tungaloy turning insert — ISO‑standard CCMT form, PVD‑coated cemented carbide for turning The CCMT120404 AH6225 Tungaloy insert is an ISO‑normed, rhombic turning insert designed for external and internal turning operations, offering a balanced combination of edge sharpness and wear resistance for variable machining conditions. PVD-coated cemented carbide AH6225 ISO CCMT120404 rhombic form 0.4 mm nose radius for medium finishes Single-sided chipbreaker with hole and countersink Consistent cutting performance for stainless steel turning The PVD‑coated cemented carbide composition in this grade is engineered for machining stainless steel under changing cutting conditions. The AH6225 grade combines a sharp edge with a robust substrate, which reduces flank wear while maintaining cutting stability. PVD coating improves resistance to abrasive and adhesive wear, so the insert preserves edge geometry longer during medium‑duty cuts. For less experienced users, PVD‑coated means a thin, hard surface layer that limits heat‑related wear and helps prevent built‑up edge formation, resulting in more predictable surface finishes. Secure fit and simple compatibility checks for toolholders Designed as an ISO‑standard CCMT insert, compatibility with an external holder or boring bar depends on form, clearance angle, tolerance class, fastening type, size and thickness. The insert’s rhombic geometry and the presence of a central hole with a single‑sided countersink enable straightforward clamping and repeatable positioning. When replacing inserts, match the CCMT120404 designation, the 7° clearance and the 4.76 mm thickness to the holder specification to ensure correct seating and stable cutting conditions; correct fit reduces vibration and extends both insert and holder life. Predictable chip control and process security A single‑sided chipbreaker tailored to the insert geometry promotes controlled chip formation and evacuation during both external and internal turning. Combined with a 0.4 mm nose radius, the configuration delivers a balance between surface quality and tool strength—ideal for medium‑cut depths and variable feeds. The design supports efficient cycle times by reducing unexpected interruptions for edge changes, and the stable cutting edge of the AH6225 grade contributes to consistent, repeatable results batch after batch. Practical application and handling notes The insert is intended for conventional turning tasks on stainless steel workpieces; select the chipbreaker and grade according to the workpiece alloy and the required surface finish. The CCMT form allows flexible orientation in many ISO CCMT holders, while the cylindrical hole plus one‑sided countersink (40°–60°) ensures positive clamping. Replace inserts at the first signs of irregular wear to maintain process reliability and part quality. For tailored cutting data or to verify holder compatibility, technical consultation is recommended. Contact Metav Werkzeuge for personalised advice on integrating the Tungaloy CCMT120404 AH6225 insert into production and to arrange supply via Metav Werkzeuge’s specialists Technical data Article number: 6903258 Manufacturer SKU: TUN6903258 SKU: 6903258‑Tungaloy Model series: ISO‑Drehwendeschneidplatten Material: Cemented carbide Core technical data Insert designation: CCMT120404 Grade/sort: AH6225 Corner radius: 0.4 mm Insert size: 12 mm Thickness: 4.76 mm Clearance angle: 7° Included angle: 80° Hole style: with hole; cylindrical hole + one‑sided countersink (40°–60°) Special features PVD coating Universal grade for stainless steel machining Single‑sided chipbreaker Rhombic insert form (CCMT) ISO‑standard design for wide holder compatibility Stable, sharp cutting edge for medium machining FAQ What materials is this insert suitable for? The CCMT120404 AH6225 insert is formulated primarily for stainless steel machining; the AH6225 grade offers a balance of edge sharpness and wear resistance ideal for variable cutting conditions. How does the chipbreaker affect machining? The single‑sided chipbreaker on this insert promotes controlled chip formation and evacuation, improving process security and reducing the likelihood of chip interference during turning operations. Which holder features must be matched to ensure compatibility? Compatibility requires matching form, clearance angle (7°), tolerance class, fastening type, size (12 mm) and thickness (4.76 mm); using an ISO CCMT‑compatible holder ensures correct seating. What does the PVD coating deliver in daily use? PVD coating increases surface hardness and heat resistance, which reduces abrasive and adhesive wear on the cutting edge and extends operational life under medium cutting conditions. Is the corner radius suitable for finishing? The 0.4 mm corner radius offers a compromise between surface finish and edge strength—well suited to medium finishes where durability is also required. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCMT 120404 AH6225 Wendeplatten - Tungaloy
Taking advantage of the combination of a PVD-coated carbide grade optimised for rostfreier Stahl, a sharp yet stable cutting edge and ISO compatibility ensures efficient, repeatable turning operations with reduced tool changes; order the insert directly via Metav Werkzeuge or consult our technical advisors for holder matching and process setup. CCMT120404 AH6225 Tungaloy ISO turning insert — PVD-coated carbide, 80° rhombic CCMT120404 AH6225 Tungaloy is an ISO-standard indexable insert for general turning applications, designed for reliable performance on rostfreier Stahl and similar materials. PVD-coated carbide for improved wear resistance Optimised for rostfreier Stahl machining Rhombic 80° geometry with 0.4 mm radius Central bore with cylindrical hole and 40°–60° countersink Reliable cutting-edge performance for medium turning The PVD-coated carbide grade AH6225 delivers a sharp but stable cutting edge, specifically formulated for medium machining and changing conditions. This indexable insert provides consistent cutting behaviour through a balance of toughness and wear resistance, reducing the need for frequent tool changes. Compatibility is governed by insert form, clearance angle, tolerance class, clamping and thickness; the ISO standard geometry allows straightforward selection of matching holders and adapting existing tool systems. Geometry that balances strength and accessibility The 80° rhombic geometry with a 0.4 mm radius offers a practical compromise between corner strength and accessibility for finish and semi-finish turns. The 80° angle increases rigidity for heavier cuts, while the modest corner radius helps maintain surface quality. The insert features a 7° relief angle and a 4.76 mm thickness, ensuring secure clamping and repeatable positioning in appropriately rated toolholders, which in turn supports stable machining and predictable tool life. Built-in chip control and secure fixing for process stability A one-sided chipbreaker adapts chip formation to general turning tasks, promoting controlled evacuation and reducing the risk of built-up edge when machining challenging stainless alloys. The insert is supplied with a central hole and a cylindrical bore plus a single-sided countersink (40°–60°) for secure fixing and precise seating; this reduces vibration and contributes to consistent surface finishes during production runs. Practical selection advice and system considerations As an ISO-series insert, CCMT120404 AH6225 should be chosen together with a compatible external holder or boring bar plus the correct shim/clamp set and replacement screws for a complete system. When processing rostfreier Stahl, select the chipbreaker and grade combination that matches feed, depth of cut and machine rigidity to benefit from the AH6225 blend of edge sharpness and wear resistance. The result is improved cycle-time reliability and lowered scrap rates through consistent chip control. Contact Metav Werkzeuge for tailored holder recommendations, matching shims and expert application advice on Tungaloy turning inserts — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Manufacturer article number: 6903263 SKU (manufacturer): TUN6903263 SKU: 6903263-Tungaloy Model series: ISO-Drehwendeschneidplatten Application: Turning Dimensions & core data ISO designation: CCMT120404 ISO code: 120404 Insert size: 12 Thickness: 4.76 mm Corner radius: 0.4 mm Geometry angle: 80° Relief angle: 7° Center hole: with hole Design & features Material: carbide (Hartmetall) Grade / coating: AH6225, PVD-coated carbide Insert shape: rhombic Chipbreaker: one-sided Hole style: cylindrical hole + one-sided countersink (40°–60°) FAQ What materials is this insert suitable for? The CCMT120404 AH6225 Tungaloy insert is designed primarily for rostfreier Stahl and similar stainless alloys; the AH6225 grade balances edge sharpness and toughness for medium turning. How does the PVD coating benefit production? The PVD-coated carbide finish on the CCMT120404 AH6225 improves wear resistance and temperature tolerance, extending tool life and maintaining a stable cutting edge under varying conditions. Which holders are compatible with this ISO insert? Compatibility depends on holder form, clearance angle, tolerance class, clamping style, insert size and thickness; select an 80° rhombic external holder or boring bar specified for ISO CCMT inserts and confirm clamping hardware fits the central bore and countersink. What cutting tasks suit the 0.4 mm radius? A 0.4 mm radius is suitable for semi-finish and light roughing where a balance of surface quality and edge strength is required; it provides improved accessibility over larger radii while retaining sufficient corner durability. Does the insert require special mounting hardware? The insert uses a central bore with a cylindrical hole and a countersink (40°–60°); use the matching shim/clamp set and replacement screws designed for ISO CCMT inserts to ensure secure, repeatable mounting. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 120404 AH6235 Wendeplatten - Tungaloy
Take advantage of the combination of a tough PVD-coated carbide grade, precise CCMT 80° geometry and reliable chip control for efficient turning of stainless steels; order directly via Metav Werkzeuge or consult our advisers for application-specific recommendations. CCMT 120404 AH6235 – Turning Insert by Tungaloy (ISO CCMT, PVD-carbide) The CCMT120404 AH6235 is an ISO-form turning insert designed for external and internal turning, optimised for interrupted cuts and machining of stainless steels. PVD-coated carbide grade AH6235 Rhombic CCMT 80° geometry 0.4 mm corner radius for fine finishing Single-sided chipbreaker with centre hole Durable grade for challenging stainless-steel operations The PVD-coated AH6235 carbide composition provides a balance of toughness and wear resistance that is particularly suited to machining stainless steel and other materials prone to work-hardening. The coating enhances flank wear resistance and thermal stability, while the substrate hardness maintains edge strength during interrupted cuts. As a result, the insert supports longer tool life and steadier process windows, which reduces unplanned stops and improves overall throughput in production environments. Geometry and clamping ensure repeatable accuracy The rhombic CCMT form with an 80° approach angle, combined with a 0.4 mm corner radius and a 7° clearance, delivers a predictable cutting force vector and an even engagement at the tool tip. The insert’s centre hole (cylindrical with a single-sided countersink at 40°–60°) enables secure seating and consistent repeatability when used with compatible holders. The plate thickness of 4.76 mm and nominal size 12 mm contribute to radial stability and edge support, resulting in improved surface finish and fewer vibrations during external and internal turning. Practical productivity advantages on the shop floor Equipped with a single-sided chipbreaker, this insert promotes controlled chip formation and evacuation for medium to heavy interrupted feeds. The combination of the PVD surface and the robust substrate reduces edge chipping and extends usable life, delivering a clear cost-in-use benefit where frequent tool changes otherwise disrupt production. Compatibility with ISO-standard holders simplifies inventory management; selecting the correct holder, clamp and screw ensures stable performance and repeatable setups across batch runs. Contact Metav Werkzeuge today to discuss application parameters for the CCMT120404 AH6235 insert or to request a tailored recommendation via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6903445 Manufacturer SKU: TUN6903445 SKU: 6903445-Tungaloy Model series: ISO turning indexable inserts Designation: CCMT120404 AH6235 Facts Insert size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 7° Insert angle: 80° Special features PVD-coated carbide grade AH6235 Single-sided chipbreaker Centre hole: cylindrical + one-sided countersink (40°–60°) ISO CCMT rhombic shape Suitable for interrupted cuts and stainless steel For external and internal turning FAQ What materials is this insert best suited for? The CCMT120404 AH6235 insert is optimised for stainless steel and workpieces where interrupted cuts or increased breakout risk occur, thanks to the AH6235 PVD-coated carbide grade. Which holder types are compatible with this insert? Compatibility is determined by form, clearance angle, tolerance class, fastening, size and thickness; use ISO-compatible holders designed for CCMT inserts and the specified 80° geometry for correct seating. How does the chipbreaker affect machining? The single-sided chipbreaker on this insert controls chip formation and evacuation, improving surface quality and reducing the chance of re-cutting chips during longer or interrupted cuts. Is the insert suitable for internal turning as well as external turning? Yes, the insert’s rhombic CCMT form and defined geometry make it suitable for both external and internal turning tasks when used with the correct boring bars or holder assemblies. What information should be provided when ordering a replacement? Please quote the designation CCMT120404 AH6235, article number 6903445 or manufacturer SKU TUN6903445 to ensure correct identification. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 120404 AH6235 Wendeplatten - Tungaloy
Benefit from robust chip control, long edge life and reduced tool changes for a steady turning process; combine PVD-coated carbide performance with a fine 0.4 mm nose radius for improved finish and reliability. Order the CCMT120404 AH6235 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. CCMT120404 AH6235 — CCMT ISO turning insert for turning, PVD-coated carbide, 0.4 mm radius (Tungaloy) CCMT120404 AH6235 is a rhombic ISO-format turning insert designed for external and internal turning, particularly where intermittent cuts or stainless materials increase the risk of edge breakage. PVD-coated carbide grade AH6235 Designed for stainless steel machining 0.4 mm nose radius for fine profiles Compatible with ISO CCMT holders Consistent cutting performance for demanding stainless applications The PVD coating combined with the AH6235 carbide grade delivers a robust cutting edge tailored for tougher-to-machine materials. The composition emphasises ductility and resistance to chipping, helping to maintain a stable cutting process when working with stainless steel or under interrupted cutting conditions. As a result, production runs benefit from fewer tool changes and improved process reliability, which translates into higher uptime and lower per-part tooling cost. The insert’s geometry supports predictable chip flow and a controllable wear pattern, making it suitable for medium-duty finishing and semi-finishing operations. Stable clamping and controlled chip formation reduce downtime The rhombic plate form with an 80° approach angle and single-sided chipbreaker is engineered to reduce vibration and limit edge damage during unstable cuts. A cylindrical hole with a single-side countersink (40°–60°) ensures repeatable, secure clamping in compatible holders, while the 7° clearance angle lowers rubbing and heat build-up at the flank. The modest 0.4 mm nose radius permits fine profile definition and improved surface quality without sacrificing the mechanical strength of the cutting edge. These combined characteristics mean less rework and a smoother workflow for batch turning tasks. Practical guidance for integration and efficient use With a plate thickness of 4.76 mm and size designation 12, the insert fits standard CCMT pockets when matched for form, tolerance and fastening. Select a suitable holder and backing shim to preserve the correct rake and clearance; the right pairing maximises the grade’s advantages in chip control and edge life. The insert is recommended where interrupted cuts, hard start/stop conditions or high breakout risk occur. For workshops seeking predictable results, the combination of PVD-coated carbide and a single-sided chipbreaker provides a balance between wear resistance and toughness, supporting consistent surface finish and repeatability across production batches. Contact Metav Werkzeuge for tailored advice on Tungaloy turning inserts and to secure the CCMT120404 AH6235 for demanding stainless applications — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6903442 Manufacturer SKU: TUN6903442 Model series: ISO turning inserts Core dimensions Geometry: CCMT 120404 Corner radius: 0.4 mm Plate thickness: 4.76 mm Plate size: 12 Clearance angle: 7° Approach angle: 80° Features & usage Material: carbide Coating: PVD Grade: AH6235 Plate form: rhombic Hole: cylindrical hole with single-side countersink (40°–60°) Chipbreaker: single-sided Typical application: external and internal turning, interrupted cuts, stainless steel FAQ What materials is this insert suitable for? The CCMT120404 AH6235 insert is optimised for stainless steel and other materials where toughness and chipping resistance are required; the PVD-coated carbide grade AH6235 provides stable chip formation for such applications. Can this insert be used for interrupted cuts? Yes, the insert’s tougher grade and single-sided chipbreaker make the CCMT120404 AH6235 particularly suited to interrupted cuts and conditions with higher breakout risk. What holder features are required for secure clamping? A compatible CCMT holder with correct pocket geometry, backing shim and fastening ensures secure clamping; the insert’s cylindrical hole with a single-side countersink (40°–60°) is designed for repeatable, stable fixation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 120404 AH725 Wendeplatten - Tungaloy
Robust PVD-coated carbide and a precise 0.4 mm corner radius deliver dependable chip control and extended edge life for demanding turning tasks. Combine ISO conformity, universal AH725 grade and compact geometry for efficient external and internal turning; order directly via Metav Werkzeuge or request personalised advice from our consultants. CCMT120404 AH725 Turning Insert (CCMT) by Tungaloy — PVD-coated carbide, 0.4 mm radius The CCMT120404 AH725 is an ISO-standard rhombic turning insert designed for general-purpose external and internal turning where process security and reliable chip control are required PVD-coated carbide grade AH725 ISO CCMT 120404 rhombic format Suitable for steel and stainless steels 0.4 mm corner radius, single-sided chipbreaker Consistent performance for mixed steel applications The PVD-coated carbide composition of this insert offers a balance of wear resistance and edge toughness; this makes it particularly suitable for machining steel and stainless steels where material mixes or shorter batch runs occur. The AH725 grade is engineered for process reliability: the coating reduces adhesive wear while the substrate maintains a robust cutting edge. As a result, operators benefit from fewer interruptions and more predictable tool life, which contributes directly to improved productivity and lower overall machining cost per component. Precise geometry that simplifies holder selection and setup Compatibility with standard toolholders is determined by form, relief angle, tolerance class, fixing method, size and thickness; the rhombic CCMT format and the 7° relief angle ensure stable contact and repeatable clamping. The insert is supplied with a cylindrical hole plus one‑side countersink (40°–60°) that matches common clamping systems, while the plate thickness of 4.76 mm and 12 mm inscribed size provide a compact, rigid package. Clear reference to these dimensions enables straightforward selection of a matching holder and reduced trial-and-error during setup, helping to shorten machine idle time. Practical benefits for everyday turning operations Designed for both external and internal turning, the single-sided chipbreaker and the 0.4 mm corner radius combine to offer controlled chip formation and enhanced edge strength in interrupted cuts or variable feeds. This geometry supports consistent surface finish and dimensional stability in small to medium-sized tools where vibration and tool overhang can be factors. The ISO-standard format simplifies stock management and tool change routines, while the universal nature of the grade minimises the need for multiple specialised inserts—helping workshops maintain flexibility without sacrificing process security. For reliable, versatile turning choose the Tungaloy AH725 grade inserts; contact Metav Werkzeuge for specification guidance and availability via info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: 6865483 Manufacturer SKU: TUN6865483 SKU: 6865483-Tungaloy Manufacturer: Tungaloy Model series: ISO turning inserts Material: carbide ISO designation: CCMT120404 Grade: AH725 Shape: rhombic Mounting: with hole, cylindrical hole + one-side countersink (40°–60°) Facts Inscribed size: 12 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 7° Included angle: 80° Special features PVD-coated carbide grade AH725 Universal, chip-resistant grade for steel and stainless steels Single-sided chipbreaker ISO CCMT format for wide holder compatibility Compact geometry for stable turning and good surface quality System components: insert, suitable external holder or boring bar, shim/clamp set and replacement screws FAQ What materials is this insert suitable for? The CCMT120404 AH725 insert is formulated for machining steel and stainless steels, providing a balance of wear resistance and edge strength for mixed-material workshops. How is compatibility with toolholders ensured? Compatibility depends on holder form, relief angle, tolerance class, fixing method, size and thickness; the CCMT120404 format, 4.76 mm thickness and the hole/countersink arrangement match common ISO holders. What coating and substrate does the insert use? This indexable plate features a PVD-coated carbide substrate in the AH725 grade, designed to reduce adhesive wear and maintain a stable cutting edge under varying conditions. What advantages does the 0.4 mm corner radius provide? A 0.4 mm corner radius increases edge strength and supports interrupted cuts and variable feed rates while helping to produce consistent surface finishes in general turning tasks. Is the insert suitable for internal turning as well as external turning? Yes; the rhombic CCMT geometry and compact dimensions make the insert appropriate for both external and internal turning applications where space and rigidity are considerations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 120404 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide AH725, ISO compatibility and a secure mounting design for dependable turning operations and consistent surface quality; order directly via Metav Werkzeuge or consult the specialists for process-specific recommendations. CCMT 120404 AH725 turning insert (ISO CCMT120404) – Tungaloy The CCMT 120404 AH725 is an ISO rhombic turning insert designed for external and internal turning, delivering universal, chip-resistant performance on steel and rostfreier Stahl. PVD-coated carbide grade AH725 ISO CCMT120404 rhombic format Single-sided chipbreaker, cylindrical hole For steel and rostfreier Stahl machining Consistent process security with a universal cutting grade The AH725 grade is a PVD-coated carbide developed for universal use where process stability and edge integrity are critical. In mixed-production environments, this grade offers a balance of wear resistance and toughness that reduces unexpected edge failures and enables longer effective tool life. The coating improves heat resistance and reduces adhesive wear during interrupted cuts, which translates into fewer tool changes and steadier cycle times in serial turning operations. ISO compatibility and secure clamping for easy integration Designed to the ISO dimensions for CCMT inserts, the rhombic shape and specified relief make this component straightforward to integrate with standard external holders and boring bars. The compatibility with the toolholder depends on factors such as form, 7° relief angle, tolerance class, clamping method, size and thickness; matching those parameters ensures stable seating and repeatable positioning. The insert’s cylindrical hole with a one-sided countersink (40°–60°) provides reliable clamping and quick indexing, aiding changeover efficiency on the shop floor. Geometry tailored for chip control and surface quality The insert features a single-sided chipbreaker combined with a 0.4 mm corner radius, which supports controlled chip formation across a range of feeds. This geometry is particularly beneficial where small to medium depths of cut are used and a compromise between finishing and robustness is required. The result is more consistent surface finish and reduced tendency for edge chipping, especially when machining steels and rostfreier Stahl under varying cutting conditions. Application guidance and practical benefits on the machine Intended for external and internal turning, the insert is most effective when the grade and chipbreaker are matched to both the workpiece material and the machine-tool stability. The 4.76 mm plate thickness and 12 mm inscribed circle provide a stable contact area for small to medium-sized tools. In practice, selecting this insert for shorter overhangs and rigid setups capitalises on its stability and gives predictable tool life, making it well suited to batch production, general workshop work and applications demanding reliable repeatability. For tailored selection or to secure the CCMT 120404 AH725 from Tungaloy for improved process reliability, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for expert advice and immediate order support Technical Data Article number: 6856766-Tungaloy Manufacturer SKU: TUN6856766 Manufacturer part number: 6856766 Article label: CCMT120404 AH725 Tungaloy-Wendeplatte Facts Inscribed circle / size: 12 mm Corner radius: 0.4 mm Relief angle: 7° Plate thickness: 4.76 mm Included angle: 80° Special features Carbide substrate, PVD-coated Grade: AH725 (universal, chip-resistant) Rhombic plate form Single-sided chipbreaker Cylindrical hole with one-sided countersink (40°–60°) ISO-turning insert series Application: external and internal turning FAQ What materials is this insert suitable for? The CCMT120404 AH725 turning insert (Tungaloy, SKU 6856766-Tungaloy) is formulated for machining steel and rostfreier Stahl and performs well where a universal, crack-resistant grade is required. How does the PVD coating benefit cutting performance? The PVD coating on this AH725 insert enhances heat resistance and reduces adhesion, which improves wear behaviour and supports consistent cutting performance under intermittent or elevated-temperature conditions. Which holders fit this ISO insert? Holders and boring bars that accept ISO CCMT120404 inserts and match the insert’s form, 7° relief angle, size and thickness will provide correct seating and clamp stability for dependable machining. What chip control can be expected from the geometry? The single-sided chipbreaker combined with a 0.4 mm corner radius produces controlled chip formation for a range of feeds, aiding surface finish and reducing the risk of edge breakouts in typical turning tasks. Is this insert suitable for small tools and high process demands? Yes. The combination of a robust AH725 grade and the insert’s secure mounting geometry makes it suitable for smaller tool assemblies where high process security and repeatable results are important. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 120404 AH8005 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide durability, precise ISO geometry and easy integration into standard turning systems for steady, repeatable results; order the genuine insert directly via Metav Werkzeuge or ask their consultants for holder matching and application advice. CCMT120404 AH8005 Tungaloy turning insert — PVD-coated carbide, 0.4 mm corner radius A CCMT120404 AH8005 turning insert designed for external and internal turning of heat-resistant alloys and hard materials, offering a balance of wear resistance and process stability. PVD-coated carbide AH8005 for long tool life Rhombic ISO CCMT form, 80° cutting geometry 0.4 mm corner radius for fine finishing Central hole with cylindrical seat and countersink Durable grade for heat-resistant and hard materials The AH8005 grade is a PVD-coated carbide developed for wear resistance under elevated cutting temperatures. As a hard, coated grade, it reduces flank and crater wear compared with uncoated grades; this translates directly into longer tool life and fewer indexings. For workshops machining heat-resistant alloys or hardened components, the combination of a robust substrate and a thin, adherent coating provides thermal stability and consistent cutting-edge performance, enabling fewer tool changes and improved productivity. Stable geometry that supports precise turning operations Built to ISO CCMT120404 dimensions, the rhombic 80° form and the specified 7° relief angle create a geometry optimised for stable external and internal turning. The standardised shape ensures compatibility with common CCMT holders; the 80° included angle balances edge strength with accessibility in shoulder or profile turning. Because the insert is indexed rather than ground in situ, consistent tolerances help maintain process security across multiple indexings, contributing to reproducible surface finishes and dimensional control in serial production. Controlled finishing and reliable chip control With a 0.4 mm corner radius and a single-sided chipbreaker, the insert suits fine-finishing passes where surface quality is a priority. The modest corner radius helps limit cutting forces and vibration while still providing a durable cutting edge for light to moderate depths of cut. The chipbreaker geometry is matched to the AH8005 grade and the intended cutting parameters to promote predictable chip formation; controlled chips reduce risk of workpiece damage and improve machine uptime. System-ready specification for straightforward integration The insert is supplied in the ISO CCMT format with a central hole and a cylindrical seat plus a one-sided countersink (40°–60°), enabling secure clamping in standard holders. Plate thickness (4.76 mm) and size (12 mm) conform to common tooling systems, simplifying inventory and replacement logistics. Selecting the correct holder and tightening torque according to the holder manufacturer’s guidance preserves insert seat integrity and ensures repeatable seating; consultants can advise on the optimal holder and screw combination to match machining stability and the chosen grade. For reliable machining of heat-resistant alloys and hard materials, order genuine Tungaloy CCMT120404 AH8005 turning inserts from Metav Werkzeuge or consult their specialists to ensure the correct holder and set-up for the application. Technical data Article number: 6749963 Manufacturer: Tungaloy Manufacturer SKU: TUN6749963 SKU: 6749963-Tungaloy Model series: ISO turning inserts Facts Corner radius: 0.4 mm Size: 12 mm Thickness: 4.76 mm Relief angle: 7° Included angle: 80° ISO code: 120404 Special features Material: carbide Coating: PVD Grade: AH8005 Shape: rhombic (CCMT) Chipbreaker: single-sided Mounting: with hole — cylindrical seat + one-sided countersink (40°–60°) Application: turning (external and internal) Compatibility: ISO CCMT holders FAQ What materials is this insert suited for? The Tungaloy CCMT120404 AH8005 insert is formulated for heat-resistant alloys and hard materials; the AH8005 grade and PVD coating provide wear-resistant performance in demanding cuts. Can the CCMT120404 AH8005 be used for both roughing and finishing? Yes, the insert can be applied to finishing and light- to medium-duty turning; the 0.4 mm corner radius and single-sided chipbreaker favour fine finishing and controlled chip formation. How is the insert mounted in a holder? The CCMT120404 includes a central hole with a cylindrical seat and a one-sided countersink (40°–60°) for secure clamping in standard CCMT holders; correct holder selection and torque are essential for repeatable seating. Does the AH8005 coating improve thermal stability? The PVD-coated AH8005 grade enhances thermal resistance and reduces abrasive wear, which helps maintain cutting-edge integrity at higher cutting temperatures. What identifiers should be quoted when ordering replacements? Please reference the product designation CCMT120404 AH8005, the manufacturer article number 6749963 and the SKU 6749963-Tungaloy when placing orders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 120404 AH8015 Wendeplatten - Tungaloy
Take advantage of the blend of PVD-coated AH8015 carbide and precise ISO geometry for reliable turning of heat-resistant alloys; the rhombic form with a 0.4 mm corner radius delivers consistent surface quality and long tool life. Order the CCMT120404 AH8015 insert directly via Metav Werkzeuge or consult our specialists for application advice. CCMT120404 AH8015 ISO rhombic turning insert for general turning — Tungaloy CCMT120404 AH8015 is an ISO-format rhombic insert designed for external and internal turning of heat-resistant alloys and general-purpose steel applications. ISO rhombic insert CCMT 120404 PVD-coated carbide grade AH8015 0.4 mm corner radius for finishing Cylindrical hole with 40°–60° countersink Robust grade and coating for heat-resistant alloys The PVD-coated AH8015 grade combines a wear-resistant surface with a stable cutting edge, making it a sound choice for machining temperature-resistant alloys. The PVD coating reduces flank wear and helps maintain cutting geometry over longer cycles, which translates into fewer insert changes and more predictable machining. For users moving from uncoated grades, this insert offers a noticeable improvement in life expectancy without sacrificing edge stability, so production runs remain consistent and downtime is reduced. ISO compatibility and secure clamping for efficient set-up Built to the ISO designation CCMT120404, the insert matches standard rhombic holders when form, clearance angle, tolerance class, fixation and thickness align. The 7° clearance angle and a plate thickness of 4.76 mm ensure rigid support in the seat, while the cylindrical hole with single-sided countersink (40°–60°) provides positive, repeatable clamping. This standardised fitment reduces set-up time and simplifies spare-part management across tool systems, supporting uninterrupted workflow on the shop floor. Predictable surface finish thanks to small corner radius The 0.4 mm corner radius is tuned for fine finishing and reproducible part geometry on external and internal contours. A smaller radius reduces cutting forces during light passes, promoting a consistent surface finish and minimising vibration in less rigid set-ups. When combined with the appropriate one-sided chipbreaker and the AH8015 grade, the insert achieves a balance between edge strength and the capacity to produce tight tolerances on turned features—valuable in precision components and batch production alike. Practical system approach for everyday turning tasks The insert is intended for general turning operations and integrates into a system comprising a compatible external holder or boring bar, a shim or clamp set and replacement screws. Selecting the right chipbreaker and grade for the workpiece material is essential: the AH8015 grade is a first choice for heat-resistant alloys, offering a compromise between wear resistance and edge robustness. By using standard ISO inserts within a complete system, tool inventory is simplified and tool-change procedures become faster, supporting higher throughput and stable machining results. For application-specific recommendations or to secure supply of Tungaloy turning inserts, contact Metav Werkzeuge for tailored advice and order processing at info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 6749964 Manufacturer SKU: TUN6749964 ISO designation: CCMT120404 Material: cemented carbide Facts Inscribed circle / size: 12 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 7° Approach angle: 80° Hole: with hole Special features Grade: AH8015 Coating: PVD Plate shape: rhombic Hole style: cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: one-sided Suitable for external and internal turning FAQ What materials is this insert best suited for? The CCMT120404 AH8015 insert is optimised for heat-resistant alloys and offers balanced wear resistance and edge stability for a broad range of steels and alloyed materials. How does the insert fit standard tool holders? The ISO designation CCMT120404 ensures compatibility with ISO rhombic turning holders when form, clearance, tolerance, fixation, size and thickness match the holder specifications. What is the purpose of the PVD coating on this grade? The PVD coating on the AH8015 grade improves wear resistance and reduces flank wear, extending usable life and improving repeatability under high-temperature cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com