CNMG 090408 AH6225 Wendeplatten - Tungaloy
Benefit from the combination of a universal AH6225 PVD-coated carbide grade, an ISO CNMG 090408 rhombic form and a double-sided chipbreaker for stable, repeatable stainless-steel turning; order the insert directly via Metav Werkzeuge or consult our specialists for application support. CNMG090408 AH6225 Tungaloy insert — ISO turning insert for stainless-steel machining The CNMG090408 AH6225 Tungaloy insert is an ISO-standard rhombic turning insert designed for external and internal turning, offering a 0° clearance angle and a balanced edge for medium machining conditions. ISO CNMG 090408 rhombic insert PVD-coated carbide AH6225 for stainless steel Double-sided chipbreaker for stable cutting 0.8 mm corner radius, 0° clearance angle Consistent machining quality for stainless steels The AH6225 grade is a PVD-coated carbide designed as a universal solution for stainless-steel applications, delivering a sharp yet stable cutting edge under varying conditions. The composition of the grade favours controlled wear and good edge integrity, which helps maintain dimensional accuracy across batch runs. Using this rhombic form contributes to a predictable chip flow and repeatable results when paired with a matching ISO turning holder. The combination of grade and geometry is particularly effective in shops that require a compromise between tool life and surface finish, enabling cost-effective production without sacrificing quality. Reliable chip control and secure clamping for productivity A double-sided chipbreaker and a cylindrical hole for secure screw fixation improve process reliability by guiding chips away from the cutting zone and ensuring stable clamping during interrupted cuts. Compatibility with the clamping system depends on insert form, free clearance angle, tolerance class, fixation type, size and thickness — these parameters ensure correct seating and repeatable run-out. The ISO system setup normally includes the insert, a suitable external holder or boring bar, a clamping pad/kit and replacement screws; this modular approach simplifies inventory management and reduces downtime for changeovers. Practical advantages in the workshop and application tips The 0.8 mm corner radius gives a balanced performance between edge strength and the ability to achieve decent surface finishes; the 4.76 mm plate thickness and rhombic geometry support moderate depths of cut in medium-duty turning. Select the chipbreaker style and grade according to material, machining mode and rigidity of the set-up: choose the AH6225 grade for variable stainless-steel work and aim for stable clamping and moderate cutting parameters to extend tool life. The ISO designation facilitates quick matching with standard toolholders, helping to streamline tool change procedures and improve overall process security while maintaining consistent surface quality. For machining tasks that demand a dependable balance of edge stability and versatility, contact Metav Werkzeuge for ordering and application advice regarding the Tungaloy CNMG090408 AH6225 insert; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitable holders and optimal cutting parameters. Technical data Article number: 6903160 Manufacturer SKU: TUN6903160 Our SKU: 6903160-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: carbide Facts Corner radius: 0.8 mm Plate thickness: 4.76 mm Insert size: 09 Geometry code: 090408 Included angle: 80° Clearance angle: 0° Special features Grade: AH6225 (PVD-coated carbide) Shape: CNMG 090408, rhombic insert Hole: with cylindrical hole Chipbreaker: double-sided Application: turning (external and internal) Compatibility: ISO-standard holders and clamping kits FAQ What materials is this insert suitable for? The CNMG090408 AH6225 Tungaloy insert is formulated primarily for stainless-steel machining and performs well in a range of medium-duty turning operations where a stable, sharp cutting edge is required. How does the chipbreaker affect performance? The double-sided chipbreaker promotes controlled chip formation and evacuation, improving surface finish and reducing the risk of recutting; the insert’s geometry supports reliable chip flow during both continuous and interrupted cuts. Which holders are compatible with this ISO insert? Compatibility is determined by the insert form, clearance angle, tolerance class, fixation type, size and thickness; the CNMG 090408 form fits standard ISO CNMG holders and compatible boring bars when used with the correct clamping pad and screws. What benefits does the AH6225 grade offer in practice? AH6225 provides a balance between edge sharpness and robustness for variable stainless-steel applications, helping to extend tool life while maintaining surface quality under changing cutting conditions. How should the corner radius influence parameter selection? The 0.8 mm corner radius offers improved edge strength for moderate depths of cut; select cutting speeds and feeds that match machine rigidity and workpiece stability to maximise life and surface finish with this radius. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090408 AH6225 Wendeplatten - Tungaloy
Combine the universal AH6225 PVD-coated carbide grade with the 80° rhombic geometry and a secure, hole-mounted clamping system for reliable machining of stainless steels. Order the CNMG090408 insert directly via Metav Werkzeuge or contact their consultants for tailored application guidance. CNMG090408 AH6225 Tungaloy indexable turning insert — PVD-coated carbide, 80° rhombic The CNMG090408 AH6225 is an ISO-standard turning insert designed for external and internal turning, optimised for medium machining of stainless steels and mixed production conditions. PVD-coated carbide grade AH6225 Optimised for stainless steels 80° rhombic geometry, 0° relief Double-sided chipbreaker, with hole Consistent cutting performance for stainless steels The insert delivers stable cutting thanks to its PVD-coated carbide composition and the AH6225 grade, which is designed for a sharp yet robust cutting edge. In practice, this means consistent surface quality and predictable tool life under variable batch conditions. The rhombic 80° geometry supports both axial and radial engagement, while the 0° relief reduces vibration in steady turning operations. The result is a dependable solution for shops that require repeatable results on stainless steels, with clear process advantages over uncoated alternatives. Secure tool clamping and straightforward tool matching Compatibility with holders depends on form, relief angle, tolerance class, fastening, size and thickness; the insert’s cylindrical hole and standard ISO dimensions simplify selection of the correct toolholder and clamping kit. The double-sided configuration permits economical indexing, and the central hole enables positive location and secure fixation. For production lines that must change inserts quickly, this design reduces downtime and ensures reproducible positioning, which supports high process reliability and fewer setup deviations. Versatile grade for mixed production and improved chip control The universal AH6225 grade is balanced for medium cutting conditions and varying materials, providing an advantageous mix of wear resistance and edge toughness. The integrated chipbreaker promotes controlled chip formation across different feeds and depths of cut, lowering the risk of chip entanglement and improving surface finish. For operations that alternate between small-batch prototypes and serial runs, the insert offers a pragmatic compromise between economy and performance, extending effective machining windows before regrinding or replacement is needed. Contact Metav Werkzeuge for application-specific recommendations and prompt supply of original Tungaloy CNMG090408 AH6225 inserts (SKU TUN6946872) from their central warehouse Technical data Article number: 6946872-Tungaloy Manufacturer SKU: TUN6946872 Manufacturer item number: 6946872 Facts Size designation: 09 Thickness: 4.76 mm Relief angle: 0° Cutting angle: 80° Corner radius: 0.8 mm Special features Material: carbide Coating / grade: PVD-coated, AH6225 Geometry: rhombic, with cylindrical hole Chipbreaker: double-sided Intended application: turning (external and internal) FAQ What materials is this insert suitable for? The CNMG090408 AH6225 insert is optimised for machining stainless steels and performs well in mixed-production scenarios where a robust, versatile grade is required. How does the hole affect clamping and stability? The cylindrical hole provides positive location and secure clamping in compatible toolholders, improving repeatability and reducing the risk of insert movement during turning. Can the insert be indexed to extend service life? Yes, the insert is double-sided and indexable; both sides can be used to extend service life before disposal or reconditioning. Which holder features must be matched to ensure compatibility? Compatibility is determined by form, relief angle, tolerance class, fastening, size and thickness; selecting a holder with matching ISO geometry and clamping hardware is essential. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090408 AH6235 Wendeplatten - Tungaloy
Take advantage of the combination of a tough PVD-coated carbide grade, ISO-standard geometry and reliable chip control to keep turning processes productive and predictable. Order the insert directly via Metav Werkzeuge or contact the consultants for compatibility and application advice. CNMG 090408 AH6235 indexable insert for turning — Tungaloy CNMG090408 AH6235 indexable insert for ISO-format external and internal turning, designed for stainless steels and interrupted cuts ISO rhombic geometry CNMG 09 format AH6235 PVD-coated carbide grade 0° relief for robust engagement Double-sided chipbreaker with cylindrical hole Greater resistance to notch and chipping for stainless turning The CNMG090408 AH6235 indexable insert combines a PVD coating with a tougher carbide substrate to resist edge breakdown during the machining of stainless steels and other demanding alloys. The coating reduces built-up edge and improves wear behaviour, while the tougher substrate increases fracture resistance in interrupted cuts. This results in longer edge life and fewer unscheduled insert changes, supporting stable production and predictable maintenance intervals. Reliable chip control and secure clamping for consistent results A double-sided chipbreaker on a rhombic ISO geometry delivers consistent chip formation and evacuation in medium to heavy turning operations. The insert’s cylindrical hole and standard ISO dimensions ensure repeatable clamping with most ISO holders; compatibility depends on form, relief angle, tolerance class, fastening method, size and thickness. The 0° relief angle provides robust engagement at the cutting edge, improving workpiece finish and reducing vibration risks in less rigid setups. Pragmatic benefits for workshop productivity and process stability Selecting this grade and geometry translates into measurable production benefits: fewer tool changes, improved surface quality and better handling of interrupted cuts common in stainless-steel components. The double-sided design effectively doubles the available cutting edges per indexable insert, offering economical edge utilisation. For operations focused on repeatability and uptime, this insert supports higher first-pass yields and reduced rework, making it a practical choice for series turning and repair work. For application advice or to secure compatible holders and accessories, contact Metav Werkzeuge — the team can recommend the correct clamping and insert combination for the intended turning task Technical data Article number: 6903350 SKU: 6903350-Tungaloy Manufacturer SKU: TUN6903350 Model series: ISO indexable turning inserts Manufacturer: Tungaloy Numbers / Core technical data Corner radius: 0.8 mm Thickness: 4.76 mm Insert size: 09 Included angle: 80° Relief angle: 0° Special features / Versions Grade: AH6235 Coating: PVD Material: carbide Shape: rhombic (CNMG) Hole: cylindrical, with hole Chipbreaker: double-sided Application: turning, suited to stainless steels and interrupted cuts ISO-format insert compatible with matching holders FAQ Which holder types are compatible with this insert? Compatibility depends on holder form, relief angle, tolerance and fastening; the CNMG090408 AH6235 indexable insert fits ISO-compatible CNMG holders with matching size and clamping geometry Is this insert suitable for continuous turning of stainless steels? Yes, the AH6235 grade and PVD coating are optimised for stainless steels and deliver improved wear resistance for continuous as well as interrupted turning operations How many effective cutting edges does the indexable insert offer? The double-sided design provides two usable cutting edges per side when indexed according to the ISO geometry, extending effective edge life and reducing tooling costs What does the 0° relief angle mean in practice? A 0° relief angle gives a robust cutting engagement with reduced likelihood of edge chipping under heavy load; it supports stability in less rigid setups and during interrupted cuts Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090408 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD‑coated carbide AH8015 for balanced wear resistance and edge stability, the double‑sided chipbreaker for consistent chip control, and ISO compatibility for straightforward toolholder selection. Order the insert directly via Metav Werkzeuge or consult the team for application advice. CNMG 090408 AH8015 indexable turning insert — Tungaloy, PVD‑coated carbide, 80° geometry The CNMG 090408 AH8015 is an ISO‑standard indexable insert for general turning, designed primarily for machining heat‑resistant alloys and other demanding materials ISO‑standard CNMG insert, 090408 size PVD‑coated carbide grade AH8015 Double-sided chipbreaker for stable cutting 0.8 mm corner radius with cylindrical hole Predictable performance through a balanced carbide grade The PVD‑coated carbide grade AH8015 delivers a deliberate compromise between wear resistance and edge stability, making it a dependable choice for sustained turning operations of heat‑resistant alloys. The thin PVD layer increases surface hardness and reduces thermal softening at the cutting edge, which translates into extended tool life and fewer interruptions for tool changes. Combined with a double‑sided chipbreaker, the geometry supports stable chip formation under varying cutting conditions, helping to maintain surface finish quality and process consistency. ISO compatibility and design for secure clamping The rhombic 80° geometry and ISO CNMG form ensure interchangeability across compatible holders; compatibility depends on form, clearance angle, tolerance class, clamping method, size and thickness. This insert features a 0° clearance angle, a 0.8 mm corner radius and a cylindrical hole for positive locating and straightforward clamping. The plate thickness of 4.76 mm and the size designation 09 match common ISO toolholders, reducing the risk of mismatch and minimising setup time. Verifying holder compatibility by comparing these parameters before assembly supports reliable seating and repeatable cutting forces. Practical selection advice to increase productivity For best results in turning and internal operations, match the chipbreaker style and grade to the workpiece material, machining type and machine rigidity; the double‑sided breaker offers flexibility for both roughing and light finishing passes. Selecting the correct holder, underlay/washer and replacement screws as part of the system reduces vibration and improves tool life. The result is a more predictable process, fewer scrapped parts and improved throughput — advantages that contribute directly to lower part costs and higher shopfloor efficiency. For specification support or to secure supply of the CNMG 090408 AH8015 insert from Tungaloy, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and fast delivery Technical data Article number: 6966102 SKU: 6966102-Tungaloy Manufacturer SKU: TUN6966102 Brand: Tungaloy Model series: ISO‑Drehwendeschneidplatten Facts Corner radius: 0.8 mm Plate thickness: 4.76 mm Included angle: 80° Clearance angle: 0° Size designation: 09 Special features PVD‑coated carbide grade AH8015 Double‑sided chipbreaker Rhombic plate form Cylindrical hole for positive locating ISO‑standard indexable turning insert Application: turning (external and internal) FAQ What materials is this insert best suited for? The CNMG 090408 AH8015 insert from Tungaloy is optimised for heat‑resistant alloys and general‑purpose turning where a balance between wear resistance and edge stability is required. How does the PVD coating affect performance? The PVD coating on the AH8015 grade increases surface hardness and thermal resistance, improving wear performance and reducing built‑up edge compared with uncoated grades. Which toolholder parameters must be checked for compatibility? Ensure the toolholder matches the CNMG form, the 80° geometry, the plate thickness (4.76 mm), size 09 and the clamping system that accommodates a cylindrical hole and the required tolerance class. Can the insert be used for both roughing and finishing? Yes; the double‑sided chipbreaker provides versatility that allows one face for heavier cuts and the other for finishing passes, subject to correct feed and speed selection. Is the 0.8 mm corner radius suitable for finishing work? A 0.8 mm corner radius offers a compromise between strength and surface finish; it provides a robust edge for medium feeds while still allowing acceptable surface quality in many finishing scenarios. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMG 090408 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of ISO conformity, PVD-coated carbide AH8015 and a 0.8 mm corner radius for consistent tool life and reliable machining of heat‑resistant alloys; order the insert directly via Metav Werkzeuge or consult the team for application-specific advice. CNMG 090408 AH8015 — Tungaloy CNMG ISO turning insert for turning A CNMG 090408 AH8015 indexable insert designed for general turning applications, offering a rhombic geometry and PVD-coated carbide grade for balanced wear resistance and edge stability in heat‑resistant alloys ISO-standard rhombic CNMG geometry PVD-coated AH8015 for heat‑resistant alloys Double-sided insert with cylindrical hole Corner radius 0.8 mm for stable cutting Consistent productivity from PVD-coated carbide The PVD-coated AH8015 grade provides a measured balance between wear resistance and cutting-edge stability, especially when machining heat‑resistant alloys. As an ISO-standard insert, it integrates predictably into production chains, reducing setup variability and enabling consistent cycle times. The coating enhances thermal resistance so that higher cutting speeds become feasible without premature flank wear, resulting in a predictable tool life and fewer unscheduled tool changes. Geometry and mounting for reliable chip control The rhombic CNMG shape paired with a doppelseitig chipbreaker geometry allows reversibility and effective chip control in both external and internal turning. The central, cylindrical hole secures repeatable clamping and orientation on standard holders, while the 0° clearance angle and included 80° approach geometry support stable engagement with the workpiece. This combination reduces vibration and improves surface finish during conventional and semi-finishing passes. Practical benefits for workshop workflows With a corner radius of 0.8 mm and a plate thickness of 4.76 mm, the insert delivers a reliable contact area for stable cutting and predictable edge behaviour under moderate depths of cut. The double‑sided design halves tool cost per edge compared with single‑side alternatives. Compatibility with commonly used external holders and boring bars streamlines inventory and minimises adapter or holder changes, helping to keep downtimes short and throughput high. Choosing the right grade and application tips The AH8015 composition is recommended as a first choice for the general machining of heat‑resistant alloys where a compromise between wear resistance and edge toughness is required. For best results, pair the insert with a holder that matches the CNMG form, tolerance class and clamping method; select feeds and speeds taking into account the workpiece material and machine rigidity to exploit the insert’s balanced performance without over‑stressing the cutting edge. Contact Metav Werkzeuge today for a tailored recommendation on Tungaloy AH8015 inserts and to confirm compatibility with existing holders or specific machining tasks; Metav Werkzeuge can provide detailed application advice and delivery options. Technical Data Article number: 6946853 Manufacturer article number: 6946853 SKU Manufacturer: TUN6946853 Model series: ISO turning indexable inserts Facts Corner radius: 0.8 mm Included angle: 80° Clearance angle: 0° Thickness: 4.76 mm Size: 09 ISO code: 090408 Special features Designation: CNMG090408 AH8015 Schneidstofftyp: PVD-coated cemented carbide Geometry: rhombic CNMG, double-sided Hole: with hole, cylindrical hole Typical use: external and internal turning Chipbreaker: double-sided Suitability: for heat-resistant alloys FAQ What materials is this insert suitable for? This CNMG 090408 AH8015 insert is primarily intended for the machining of heat‑resistant alloys; the AH8015 grade balances wear resistance and edge stability for such materials. How does the PVD coating benefit cutting performance? The PVD-coated surface on the AH8015 grade offers improved thermal protection and reduced adhesion, which helps maintain edge integrity and extend the insert’s usable life under elevated cutting temperatures. Is the insert reversible and how does that affect cost? The double‑sided design allows the indexable insert to be rotated to a fresh edge, effectively doubling the number of usable cutting edges and lowering cost per edge compared with single‑edged inserts. Which holder types are compatible with this insert? Compatibility is determined by insert form, free angle, tolerance class, clamping and size; the CNMG090408 form fits standard CNMG external holders and boring bars when the holder matches the ISO specifications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090408 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide AH8015 grade and the ISO rhombic CNMG090408 geometry with a 0.8 mm cutting edge radius for stable, general-purpose turning of heat-resistant alloys; order or request application advice via Metav Werkzeuge. CNMG090408 AH8015 CNMG ISO rhombic turning insert for general turning – Tungaloy The CNMG090408 AH8015 is an ISO-standard rhombic turning insert designed for versatile external and internal turning in demanding materials, offering a balanced mix of wear resistance and edge stability. PVD-coated carbide AH8015 grade ISO rhombic CNMG 09 insert 0.8 mm cutting edge radius Double-sided chipbreaker, with cylindrical hole Reliable cutting performance for heat-resistant alloys The PVD-coated AH8015 grade provides a balance between wear resistance and cutting-edge stability, making this insert well suited for machining heat-resistant alloys and other demanding materials. The combination of a PVD coating and a robust carbide substrate reduces flank wear and helps preserve surface finish over longer tool life. In practice, this means consistent component quality during extended production runs and fewer unscheduled tool changes, improving overall machining efficiency. Designed for quick integration into ISO systems Compatibility with standard holders is determined by geometry, clearance angle, tolerance class, fixation method, size and thickness, and the CNMG090408 conforms to ISO norms for straightforward replacement. The rhombic plate form and the cylindrical hole allow secure clamping in a matching external holder or a boring bar; the double-sided design offers economical indexing. The system approach—insert, holder or boring bar, shim/clamp and replacement screws—ensures predictable clamping forces and repeatable set-up in production. Practical advantages in shop-floor use The relatively large 0.8 mm corner radius and the plate thickness of 4.76 mm contribute to edge strength and vibration damping during heavier cuts, while the 0° clearance supports stable cutting geometry in typical turning operations. Users benefit from a good compromise between robustness and the ability to achieve acceptable surface finishes without complex parameter changes. The insert’s ISO CNMG form simplifies stock management by matching widespread holder families. Clear benefits and user guidance Selecting the correct chipbreaker and grade for the workpiece and operation is essential; the double-sided chipbreaker here is suitable for a wide range of feeds and depths of cut in turning. For applications that demand higher stability or when machining particularly abrasive alloys, pairing this insert with a rigid holder and optimised cutting parameters improves tool life and process security. If further technical data or machining recommendations are required, Metav Werkzeuge provides application support and can advise on the ideal holder-insert pairing. Contact Metav Werkzeuge for tailored machining advice and reliable supply of Tungaloy CNMG090408 AH8015 inserts via Metav Werkzeuge; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6793718 Manufacturer SKU: TUN6793718 SKU: 6793718-Tungaloy Brand: Tungaloy Designation: CNMG090408 AH8015 Facts Angle: 80° Cutting edge radius: 0.8 mm Thickness: 4.76 mm Clearance angle: 0° ISO code: 090408 Special features PVD-coated carbide (AH8015) Rhombic plate form (CNMG) Double-sided chipbreaker Cylindrical hole For turning (external and internal) FAQ What materials is this insert best suited for? The CNMG090408 AH8015 insert is formulated for general machining of heat-resistant alloys and similar demanding materials, with the AH8015 PVD-coated carbide offering a balance of wear resistance and edge stability. How is holder compatibility determined for this insert? Compatibility depends on the insert form, clearance angle, tolerance class, fixation method, size and thickness; the ISO CNMG090408 designation ensures compatibility with standard CNMG holders and boring bars. What are the key dimensional specifications to check before fitting? Check the plate form (CNMG), corner radius (0.8 mm), thickness (4.76 mm) and the 80° included angle to ensure correct seating and clamping in the chosen holder. Can the insert be indexed and reused? Yes, the insert is double-sided with multiple usable edges; indexing provides economical use of the cutting material and predictable changeover. What advantages does the PVD coating provide? The PVD-coated AH8015 grade enhances surface hardness and wear resistance, improves flank wear behaviour and supports stable cutting performance during longer cycles. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090408 AH8015 Wendeplatten - Tungaloy
Take advantage of proven ISO geometry, a PVD-coated AH8015 carbide grade and a 0.8 mm corner radius to ensure stable cutting and long edge life; order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. CNMG090408 AH8015 Tungaloy indexable insert — PVD-coated carbide for turning, 0.8 mm corner radius The CNMG090408 AH8015 Tungaloy insert is an ISO-indexed turning insert engineered for external and internal turning applications; its ISO CNMG geometry and PVD-coated grade suit machining of heat-resistant alloys. ISO CNMG090408 geometry for standard holders PVD-coated AH8015 carbide for heat-resistant alloys 0.8 mm corner radius for robust cutting edges Double-sided insert with cylindrical hole Consistent cutting performance for demanding turning The CNMG090408 AH8015 insert combines an ISO CNMG geometry with a PVD-coated AH8015 carbide grade, delivering a balance between wear resistance and edge stability. This composition makes the insert particularly suitable for the general machining of heat-resistant alloys, where thermal loads and edge degradation can limit productivity. The PVD layer reduces adhesive wear and helps maintain a predictable cutting behaviour at elevated temperatures, supporting longer uninterrupted runs and fewer insert changes. Shop-floor advantages that raise productivity A double-sided design and the presence of a cylindrical hole for secure clamping reduce tooling cost per cutting edge and simplify indexation. The 0.8 mm corner radius increases resistance to chipping and is advantageous for semi-finish turning where a robust edge improves cycle stability. The ISO standard form ensures broad holder compatibility; selecting the correct holder and clamping kit according to form, clearance and tolerance class enables consistent tool performance and quick changeover. Practical selection guidance for reliable results Compatibility depends on holder form, free/relief angle, tolerance class, clamping and plate thickness. The indexable plate is offered in the ISO series intended for turning; a matching outside holder or boring bar, appropriate shim/clamp set and fastening screw complete the system. Choose the chipbreaker and grade to match the workpiece, machining strategy and machine stability — the right combination reduces vibration, improves surface finish and lengthens insert life for predictable, cost-effective production. For reliable machining with Tungaloy’s AH8015 grade and ISO CNMG geometry, contact Metav Werkzeuge for tailored advice and fast supply: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6946673 Manufacturer SKU: TUN6946673 SKU: 6946673-Tungaloy Designation: CNMG090408 AH8015 Series: ISO turning indexable inserts Material: Carbide Grade: AH8015 Brand: Tungaloy Facts Corner radius: 0.8 mm Plate thickness: 4.76 mm Size: 09 Included angle: 80° Relief angle: 0° Hole: with cylindrical hole Double-sided: yes Special features PVD-coated grade AH8015 Designed for heat-resistant alloys ISO CNMG090408 geometry Double-sided chipbreaker Compatibility determined by holder form, clearance, tolerance, clamping, size and thickness FAQ Is this insert suitable for heat-resistant alloys? The CNMG090408 AH8015 Tungaloy indexable insert (SKU 6946673-Tungaloy) is specified as a first choice for general machining of heat-resistant alloys due to its balanced wear resistance and edge stability. Can the insert be used for both external and internal turning? Yes, the insert is intended for external and internal turning; compatibility with a given holder or boring bar must be checked to ensure proper form, free angle and clamping. What advantage does the 0.8 mm corner radius offer? A 0.8 mm corner radius provides a robust cutting edge that resists chipping, improving stability in semi-finish operations and during interrupted cuts. Is the insert reversible and how does that affect cost? The insert is double-sided, allowing a second cutting edge to be used after indexing; this reduces cost per edge and extends productive tool life. How to ensure correct clamping and fit in the holder? Check holder compatibility against the ISO CNMG090408 form, the relief (free) angle, tolerance class, clamp system and plate thickness; proper clamping and a matching shim or clamp set ensure secure fixation and repeatable performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090408 AH8015 Wendeplatten - Tungaloy
Take advantage of a robust combination of PVD-coated carbide wear resistance and ISO-standard geometry for consistent turning of heat-resistant alloys; the balanced AH8015 grade offers stable cutting-edge life and wide material coverage. Order genuine Tungaloy inserts via Metav Werkzeuge or request application advice from our consultants for fast availability and reliable tool pairing. CNMG090408 AH8015 carbide turning insert — ISO rhombic, 80° included angle — Tungaloy The CNMG090408 AH8015 is an ISO-standard rhombic turning insert designed for general turning, offering a balanced mix of wear resistance and cutting-edge stability for machining heat-resistant alloys. PVD-coated carbide for heat-resistant alloys ISO CNMG 090408 rhombic geometry 0.8 mm corner radius for versatility Double-sided with cylindrical hole 4.76 mm plate thickness for rigidity Consistent geometry for repeatable turning performance The rhombic ISO form with an 80° included angle and 0° relief angle ensures predictable contact geometry and stable chip flow during external and internal turning. The standardised shape facilitates interchangeability across compatible holders; compatibility is governed by form, relief angle, tolerance class, fastening, size and plate thickness, enabling straightforward replacement and reduced setup time. Predictable geometry contributes directly to process stability and machining accuracy. Balanced grade optimised for heat-resistant alloys The AH8015 grade is a PVD-coated carbide selected as a first choice for general machining of heat-resistant alloys, balancing wear resistance with edge stability. This combination extends tool life under elevated cutting temperatures while maintaining surface quality. The moderate corner radius of 0.8 mm offers a compromise between strength and sharpness, supporting both finishing and light roughing operations with reduced risk of edge chipping. Practical design that supports secure clamping and rigidity The insert is double-sided and supplied with a cylindrical hole, compatible with a wide range of external holders and boring bars when the holder matches the ISO form and dimensions. The 4.76 mm plate thickness provides mechanical rigidity, lowering vibration sensitivity and enabling stable machining when paired with appropriately rated toolholders. Clear mechanical interfaces reduce assembly time and enhance repeatability across tool changes. Process advantages and productivity gains Using a wear-resistant PVD-coated grade with stable cutting-edge geometry reduces downtime for insert changes and contributes to consistent part quality. The double-sided design doubles indexable life per insert, while ISO conformity simplifies inventory management. Together, these attributes support economical production runs and predictable maintenance intervals, translating into lower cost per component and improved throughput. Contact Metav Werkzeuge for tailored application advice or to source genuine Tungaloy CNMG090408 AH8015 inserts and ensure optimal tool-holder pairing Technical data Article number: 6946875 Manufacturer SKU: TUN6946875 SKU: 6946875-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Corner radius: 0.8 mm Included angle: 80° Relief angle: 0° Plate thickness: 4.76 mm Size: 09 Special features PVD-coated carbide (AH8015) Double-sided insert with chipbreaker Rhombic plate form With cylindrical hole Application: Turning ISO-series insert; compatibility requires matching holder form, relief angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suitable for? The AH8015 grade on the CNMG090408 insert is designed primarily for machining heat-resistant alloys, offering a balance of wear resistance and edge stability suitable for a wide range of alloyed materials. How does the 0.8 mm corner radius affect machining? A 0.8 mm corner radius on the CNMG090408 insert provides increased edge strength compared with smaller radii, allowing light roughing and finishing with reduced chipping risk while maintaining acceptable surface finish. Is the insert compatible with standard CNMG holders? Yes, the CNMG090408 conforms to ISO geometry; compatibility depends on matching the holder’s form, relief angle, tolerance class, fastening method, size and thickness as specified by the toolholder manufacturer. Does the insert come pre-coated and what is the coating type? The insert is supplied in the AH8015 specification, which is a PVD-coated carbide grade engineered for enhanced wear resistance during machining of heat-resistant alloys. How does the plate thickness influence performance? The 4.76 mm plate thickness increases stiffness and reduces vibration sensitivity, supporting stable cutting conditions when used with appropriately rated holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090408 AH8015 Wendeplatten - Tungaloy
Benefit from the combination of balanced wear resistance and edge stability offered by the AH8015 grade, together with ISO compatibility for straightforward integration into standard holders; order directly via Metav Werkzeuge or contact our advisors for cutting-data support. CNMG090408 AH8015 ISO turning insert for turning by Tungaloy — rhombic 09, 0.8 mm corner radius, 80° A CNMG090408 AH8015 insert designed for ISO‑compliant external and internal turning, optimised for heat‑resistant alloys and everyday workshop productivity ISO‑standard CNMG090408 insert, 80° included angle AH8015 PVD-coated carbide for heat-resistant alloys Rhombic 09 form with 0.8 mm corner radius Double-sided chipbreaker, cylindrical hole, 4.76 mm thick Higher productivity through balanced grade and coating The AH8015 grade is a PVD‑coated carbide engineered as a first choice for the machining of heat‑resistant alloys, offering a balanced combination of wear resistance and edge stability. This balance reduces unexpected tool changes and supports longer uninterrupted machining cycles, which leads to improved throughput. The coating enhances resistance to adhesive and abrasive wear at elevated temperatures, so the insert maintains performance where uncoated grades would deteriorate quickly. Simple integration with ISO tooling systems Manufactured to the ISO series format, the insert matches the critical parameters that determine holder compatibility: form, relief angle, tolerance class, clamping style, size and thickness. The rhombic 09 geometry with an 80° included angle and 0° free angle makes the component straightforward to fit into many standard external holders and boring bars. The cylindrical hole facilitates secure clamping and repeatable positioning, while the 4.76 mm thickness provides the mechanical support needed for stable cutting in interrupted or heavy cuts. Consistent chip control and surface quality The double‑sided chipbreaker reduces chip size and stabilises the cutting process, resulting in more consistent surface finishes and less time spent on secondary operations. The 0.8 mm corner radius strengthens the cutting edge, improving edge life under higher feed rates and more demanding conditions. Where fine surface finish is essential, selecting appropriate feeds and a matching chipbreaker style will deliver the required balance between tool life and finish quality. Practical application guidance for workshop use Intended primarily for turning, the insert performs well in both external and internal operations when paired with a suitable external holder or boring bar and properly selected cutting parameters. The system approach—insert, holder, clamp set and replacement screws—ensures secure assembly and repeatable results. For shops processing heat‑resistant alloys, the AH8015 choice reduces rework and increases uptime; for other materials, choose the chipbreaker and cutting data matched to the workpiece for optimal results. Contact Metav Werkzeuge today for tailored cutting data, rapid availability of Tungaloy CNMG090408 AH8015 turning inserts and practical advice for integration into existing tool systems Technical data Article number: 6946755 Manufacturer SKU: TUN6946755 SKU: 6946755-Tungaloy Model series: ISO‑Drehwendeschneidplatten Material: Carbide Application: Turning Facts Corner radius: 0.8 mm Thickness: 4.76 mm Insert size: 09 Included angle: 80° Free angle: 0° Special features Coating: PVD Grade: AH8015 Shape: Rhombic Hole: Cylindrical hole Chipbreaker: Double-sided chipbreaker Form designation: CNMG090408 FAQ What materials is the insert optimised for? The AH8015 grade on the CNMG090408 insert is optimised for machining heat‑resistant alloys; matching chipbreaker and cutting data is recommended when processing other materials. What effect does the 0.8 mm corner radius have on machining? A 0.8 mm corner radius increases edge strength and tool life under heavier feeds, while producing a slightly more robust surface finish compared with smaller radii. Is this insert reversible and how is it clamped? Yes, the insert is double‑sided and designed for reversible use; the CNMG090408 AH8015 turning insert features a cylindrical hole for secure, repeatable clamping. How is compatibility with toolholders determined? Compatibility is determined by form, free angle, tolerance class, clamping method, size and thickness; the ISO‑compliant CNMG090408 designation aids correct holder selection. What does the designation CNMG090408 indicate? The designation indicates a rhombic CNMG geometry with an insert size 09, a 0.8 mm corner radius and the 04× thickness series (4.76 mm), matching ISO standards for turning inserts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090408 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of robust PVD‑coated carbide (AH8015) and an ISO‑standard CNMG format for reliable turning of heat‑resistant alloys; the double‑sided chipbreaker and cylindrical hole ensure economical clamping and simple indexability. Order the CNMG090408 AH8015 insert directly via Metav Werkzeuge or consult our technical team for application advice. CNMG090408 AH8015 CNMG indexable insert for turning by Tungaloy — PVD‑coated carbide, double‑sided chipbreaker CNMG090408 AH8015 is an ISO‑standard rhombic insert designed for general turning applications where a balanced combination of wear resistance and edge stability is required ISO‑standard rhombic CNMG insert PVD‑coated AH8015 carbide grade For heat‑resistant alloys and general turning Double‑sided chipbreaker for cost efficiency Cylindrical hole for secure clamping Consistent cutting performance for heat‑resistant alloys The AH8015 grade is a PVD‑coated carbide developed as a first choice for the general machining of heat‑resistant alloys, delivering a balance between wear resistance and edge stability. This composition supports sustained cutting conditions common in aerospace, power generation and other high‑temperature alloy work, helping to maintain dimensional accuracy and surface quality over longer tool life. Where high thermal loads occur, the coating reduces flank wear and helps preserve the cutting edge for predictable tool‑change intervals. Reliable fit and secure clamping reduce setup variability The rhombic CNMG format conforms to ISO dimensions, so compatibility with external holders is determined by form, relief angle, tolerance class, clamping method, size and thickness. The insert features a cylindrical hole for consistent clamping and a corner radius of 0.8 mm, which offers a compromise between toughness and surface finish. The plate thickness 4.76 mm and the 80° insert angle aid in stable engagement during both external and internal turning, reducing chatter and contributing to repeatable results on standard CNMG toolholders. Economic machining through indexability and chip control Being double‑sided with a dedicated chipbreaker on each usable edge, this insert doubles the available cutting edges before replacement, lowering per‑edge cost and improving process economy. The integrated chipbreaker is matched to general turning tasks; when paired with a suitable holder and cutting parameters, it promotes controlled chip formation and evacuation. The combination of a robust substrate and PVD coating reduces unplanned interventions, supporting higher productivity and predictable throughput in serial and batch production. Practical selection and handling advice for secure results For best results, choose a chipbreaker and grade that match the workpiece material, machining mode and system rigidity; the AH8015 grade is particularly suited for alloys that demand thermal resilience. Confirm holder compatibility by checking form, free angle and tolerance class rather than relying solely on nominal ISO designation. Inserts are reversible; ensure correct orientation and torque for clamping screws to prevent slippage. If further machining data or parameter recommendations are required, technical advice is available to align insert choice with cycle‑time and surface‑finish targets. For tailored advice on applying the CNMG090408 AH8015 Tungaloy indexable insert or to arrange supply through Metav Werkzeuge, contact Metav Werkzeuge for application support and ordering assistance. Technical data Article number: 6750468 Manufacturer SKU: TUN6750468 Product name: CNMG090408 AH8015 Tungaloy insert Facts Size designation: 09 Corner radius: 0.8 mm Thickness: 4.76 mm Relief angle: 0° Insert angle: 80° Hole style: cylindrical Special features PVD‑coated carbide (AH8015) Double‑sided chipbreaker ISO‑standard rhombic format (CNMG) For turning of heat‑resistant alloys Compatible with standard CNMG holders FAQ What materials is this insert suitable for? This CNMG090408 AH8015 insert is intended primarily for heat‑resistant alloys and general turning applications where a balance of wear resistance and edge stability is required. How many usable cutting edges does the insert provide? The CNMG090408 AH8015 Tungaloy insert is double‑sided, offering multiple usable edges before replacement to improve cost efficiency. What is the corner radius and why does it matter? The corner radius is 0.8 mm; this radius balances edge strength and surface finish, influencing feed and cutting‑force requirements during turning. Is the insert compatible with standard CNMG holders? Yes, the insert follows ISO CNMG dimensions; compatibility depends on holder form, relief angle, tolerance class, clamping method, size and thickness. What does the AH8015 designation mean? AH8015 denotes a PVD‑coated carbide grade chosen for a combination of wear resistance and cutting‑edge stability, especially for higher‑temperature alloys. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMG 090408 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD‑coated carbide AH8015, a 0.8 mm corner radius and robust edge stability to maintain consistent turning performance on heat‑resistant alloys; order directly via Metav Werkzeuge or contact the consultants for compatibility advice. CNMG090408 AH8015 ISO turning insert (rhomboid, PVD‑coated) by Tungaloy A CNMG090408 AH8015 rhombic turning insert for external and internal turning, optimised for heat‑resistant alloys and general turning operations PVD-coated carbide grade AH8015 ISO CNMG 090408 rhombic insert Double-sided with cylindrical hole Balanced wear resistance and edge stability Durable grade for heat‑resistant alloys and general turning performance The AH8015 grade is a PVD‑coated carbide formulation developed as a first choice for machining heat‑resistant alloys. The coating and substrate balance wear resistance with cutting‑edge stability, which reduces unexpected tool changeovers and keeps cycle times predictable. For workshops processing high‑temperature alloys, this insert offers reliable flank and crater wear behaviour that supports longer uninterrupted runs and helps stabilise overall production efficiency. Geometry and system compatibility that simplify tool selection With a rhombic form, 0° clearance, an 80° main angle and a 0.8 mm corner radius, the insert delivers a predictable cutting profile and good access for external and internal turning tasks. Compatibility with holders is determined by form, clearance, tolerance class, fixing method, size and thickness; the insert integrates into standard ISO systems alongside a matching outside holder or boring bar, shim/clamping set and spare screws. Clear geometry reduces setup time and simplifies tool inventory management. Practical benefits for workshop productivity and quality The double‑sided design and cylindrical locating hole permit economical use and secure clamping, while the nominal thickness of 4.76 mm and insert size 09 provide mechanical stiffness for stable cutting. The balanced edge stability of the grade minimises edge chipping on interrupted cuts and supports consistent surface finish and dimensional accuracy. For operations prioritising repeatability and low variance, this insert contributes directly to improved process control and fewer in‑process rejects. For tailored advice on holder compatibility, stock availability or application‑specific recommendations contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the CNMG090408 AH8015 turning insert and matching toolholders. Technical data Article number: 6966088 SKU: 6966088-Tungaloy Manufacturer SKU: TUN6966088 Model series: ISO turning inserts Core specifications Insert designation: CNMG090408 Grade/sort: AH8015 Material: carbide Thickness: 4.76 mm Insert size: 09 Corner radius: 0.8 mm Main angle: 80° Clearance angle: 0° Hole: with hole (cylindrical) Features & compatibility PVD‑coated carbide grade AH8015 Rhombic insert, double‑sided chipbreaker Suitable for external and internal turning Compatibility via form, clearance, tolerance class, fixing, size and thickness System components: insert, outside holder/boring bar, shim/clamping set, spare screws Typical application: machining heat‑resistant alloys and general turning FAQ What materials is this insert best suited for? The CNMG090408 AH8015 insert is formulated for machining heat‑resistant alloys and covers a broad range of general turning applications where a balance of wear resistance and edge stability is required. How is the insert clamped in the toolholder? This rhombic, double‑sided insert locates via a cylindrical hole and is secured by the holder’s clamping screw and shim/clamping set compatible with ISO turning systems. Can the edge radius be used for finishing passes? The 0.8 mm corner radius provides a compromise between strength and finish; it is suitable for semi‑finishing and programmes that require stable cutting with good surface integrity. Is the grade PVD coated and what benefit does that bring? Yes, the AH8015 is PVD‑coated, which enhances wear resistance and helps maintain cutting‑edge integrity during elevated temperatures and sustained cutting. Which components are required to assemble a working system? A complete turning system comprises the insert, a matching outside holder or boring bar, the appropriate shim/clamping set and spare screws; compatibility depends on form, clearance, tolerance class, fixing, size and thickness. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMG 090408 AT9530 Wendeplatten - Tungaloy
Take advantage of consistent surface quality, uniform wear behaviour and ISO compatibility in one proven insert; the AT9530 coating and cermet cutting material deliver productive finishing cycles. Order the CNMG090408 AT9530 turning insert directly via Metav Werkzeuge or consult our technical advisors for tailored application support. CNMG090408 AT9530 Turning insert by Tungaloy A CNMG090408 AT9530 ISO-compliant turning insert designed for finishing and light turning of steel, offering controlled chip formation and a focus on surface integrity. ISO‑compliant CNMG090408 geometry AT9530 coated cermet grade Double-sided chipbreaker for stable chips Optimised for finishing and light turning High-quality finishing performance for demanding steel turning The rhombic geometry, combined with the AT9530 coated cermet grade, is engineered to produce a superior surface finish while maintaining steady wear behaviour. In practical terms, this means fewer part reworks and a more predictable tool lifetime when carrying out light cuts and finishing passes. The specification emphasises controlled cutting action and thermal stability typical of cermet coatings, which helps keep dimensional accuracy and visual part quality consistent across production batches. Compatibility and mounting that support efficient tool changes Designed as an ISO‑standard insert, compatibility with existing holders depends on form, relief angle, tolerance class, fastening method, size and thickness. The insert’s 0° relief angle and rhombic shape require matching clamping geometry; the presence of a cylindrical hole also affects the choice of clamping screw and support pad. Specifying compatible holders and clamping sets ensures secure fixing, repeatable seat location and minimal setup time, supporting uninterrupted machining processes. Practical material guidance and chip control explained This insert is tailored for steel finishing: the AT9530 coating promotes uniform wear and a fine surface texture, while the double-sided chipbreaker contributes to controlled chip segmentation and evacuation. The combination of a 0.8 mm corner radius and a 4.76 mm plate thickness balances edge strength with the ability to achieve fine surface profiles. For less experienced users, remember that chipbreaker selection must match workpiece material, cutting depth and machine rigidity to achieve the intended benefits. For precision finishing with Tungaloy’s AT9530 cermet insert, contact Metav Werkzeuge for availability and application advice via info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical data Article number: 6773688 Manufacturer SKU: TUN6773688 Vendor SKU: 6773688-Tungaloy ISO designation: CNMG090408 Facts Corner radius: 0.8 mm Plate thickness: 4.76 mm Insert size: 09 Main angle: 80° Relief angle: 0° Hole style: cylindrical hole Special features Grade: AT9530 (coated cermet) Carbide body Double-sided chipbreaker ISO turning insert series Rhombic plate form (CNMG) Suitable for finishing and light turning of steel FAQ What operations is this insert best suited for? The CNMG090408 AT9530 turning insert by Tungaloy is optimised for finishing and light turning operations on steel where surface quality and uniform wear are priorities. Which workpiece materials can be machined with this grade? The AT9530 coated cermet grade is intended primarily for steel finishing; it offers improved surface integrity and consistent wear when used in appropriate finishing parameters. How can compatibility with existing holders be ensured? Compatibility depends on form, relief angle, tolerance class, fastening, size and thickness; check the holder geometry against the CNMG090408 dimensions and the presence of a cylindrical hole before fitting. What chip control features does the insert provide? The double-sided chipbreaker on the CNMG090408 supports stable chip formation and evacuation, aiding consistent cuts and reducing the risk of built-up edge during finishing passes. What are the relevant geometric details to note before setting up? Key dimensions are a 0.8 mm corner radius, 4.76 mm plate thickness and an 80° main angle; the insert also has a 0° relief angle and a cylindrical locating hole. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090408 GT9530 Wendeplatten - Tungaloy
Take advantage of the coated cermet GT9530 grade and the robust ISO CNMG090408 geometry to achieve consistently high surface quality and extended cutting life; order directly via Metav Werkzeuge or consult the product specialists for holder and chipbreaker selection. CNMG090408 GT9530 Tungaloy indexable insert — ISO turning insert for turning A CNMG090408 GT9530 indexable insert engineered for finishing to light universal turning of steel, delivering improved surface finish and reliable wear resistance in stable machining conditions Coated cermet GT9530 for extended tool life ISO CNMG 09, rhombic 80° geometry Double-sided insert with cylindrical hole 0° relief angle and 0.8 mm corner radius Enhanced finish and predictable tool life The coated cermet GT9530 grade is formulated for finishing and light universal turning, combining a wear-resistant cermet substrate with a tailored coating to reduce abrasive wear and maintain edge integrity. In practice this translates into a more consistent surface finish and longer intervals between indexings when machining steel under stable conditions. Cermet inserts excel where fine surface quality matters: the hardened surface of the cermet matrix resists adhesion and maintains a keen cutting edge, while the coating further postpones flank wear. Compatibility with ISO holders is ensured by the standard CNMG geometry and specified thickness. Stable geometry for versatile turning operations The rhombic 80° geometry and the standard CNMG form permit both external and internal turning with effective access to shoulders and contours. The 0° relief angle suits rigid set-ups where minimal tool overhang and high stability are priorities, enabling repeatable dimensional tolerance and surface control. The double-sided design provides two cutting edges per indexed side, while the cylindrical central hole ensures secure clamping and consistent seat location. For optimum results, select the chipbreaker and grade variant that align with workpiece stability and the intended cut depth. Practical handling that reduces downtime A thickness of 4.76 mm and a 0.8 mm corner radius provide a good balance between edge strength and the ability to produce fine finishes; the corner radius stabilises the cut and helps avoid chatter in steady conditions. The CNMG format, combined with double-sided use, reduces tooling costs by increasing edge economy and simplifying spare-part management. Replacement is straightforward: the insert, holder, clamp and screws form the system and can be serviced without complex adjustments, which lowers machine downtime and contributes to predictable production cycles. Brand performance and process reliability Made by Tungaloy, the insert benefits from a manufacturing approach that emphasises consistent cutting-edge quality and modern grade development. The combination of a cermet substrate and applied coating supports reliable wear behaviour and repeatable machining performance across production runs. For operations prioritising surface quality and extended edge life in turning steel, this insert presents a processing-stable solution that complements productivity goals while maintaining cost-efficiency. Contact Metav Werkzeuge for tailored advice on holder compatibility, chipbreaker selection and batch supply for the Tungaloy CNMG090408 GT9530 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6710242 Manufacturer SKU: TUN6710242 Designation: CNMG090408 Manufacturer: Tungaloy Material / substrate: carbide Grade / coating: GT9530 (coated cermet) Facts Size designation: 09 Plate thickness: 4.76 mm Corner radius: 0.8 mm Insert angle: 80° Relief angle: 0° Hole style: cylindrical Special features Rhombic plate form Double-sided chipbreaker ISO-standard turning insert Compatible with matched CNMG holders Suitable for finishing and light universal turning of steel FAQ What workpiece materials is this insert designed for? This insert is intended primarily for machining steel in finishing to light universal turning applications, utilising the GT9530 coated cermet grade for improved surface finish and wear resistance. How many usable cutting edges does the insert provide? The double-sided construction gives multiple usable edges; each side can be indexed to provide additional cutting edges before replacement is required. Which geometry and holder features are required for compatibility? Compatibility depends on matching the CNMG shape, 80° geometry, plate thickness, relief angle and clamping style; use a holder designed for CNMG inserts with a cylindrical-clamping arrangement. What finish can be expected with a 0.8 mm corner radius? A 0.8 mm corner radius offers a compromise between edge strength and surface quality, delivering consistent finishes while reducing the risk of edge chipping in stable set-ups. How is the insert secured in the toolholder? The insert uses a central cylindrical hole and standard clamp/screw fixation; proper torque and a matching clamping seat ensure repeatable location and secure fixation Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090408 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of a wear-resistant GT9530 coating, precise CNMG090408 geometry and reliable ISO compatibility to improve finishing results and extend tool life; order directly via Metav Werkzeuge or consult their technical team for application-specific advice. CNMG 090408 GT9530 Turning Insert (CNMG090408) by Tungaloy — Coated Cermet for Finishing A CNMG090408 GT9530 indexable turning insert engineered for external and internal turning, offering a wear-resistant coated cermet grade for improved surface finish and extended life in stable machining conditions Coated cermet grade GT9530 Rhombic 80° insert geometry 0° clearance, 0.8 mm nose radius Double-sided chipbreaker with cylindrical hole Consistent finishing and extended tool life with GT9530 The GT9530 grade is a coated cermet designed for wear resistance during finishing and light universal turning of steel. The cermet substrate delivers a fine edge stability that supports improved surface quality, while the coating enhances resistance to abrasive wear. As a result, operators benefit from fewer interruptions for insert changes and more predictable component tolerances. The combination of a refined substrate and protective coating makes this insert particularly suitable where surface finish and tool life are prioritised over aggressive material removal rates. Precision geometry for reliable clamping and stable results The CNMG090408 format uses a rhombic 80° geometry and a 0° clearance angle that together enable stable engagement in both external and internal turning operations. The 0.8 mm nose radius balances edge strength and finishing capabilities: a larger radius increases process stability and surface integrity, while still allowing accurate form turning when required. Compatibility with ISO toolholders is determined by form, clearance, tolerance class, fastening method, size and thickness, ensuring straightforward integration into existing toolsets and reducing setup time. Practical benefits and application guidance for production use The double-sided chipbreaker and cylindrical hole allow economical indexing of available cutting edges and secure fixing in matched holders. Under stable clamping and machine conditions this grade performs best in finishing to light universal turning of steel, where consistent chip control and a high-quality surface are required. Select an appropriate chipbreaker and holder matching the insert’s specifications to exploit the coated cermet advantages; when in doubt, Metav Werkzeuge’s specialists can advise on holder compatibility, grade selection and process parameters to raise productivity and reduce cycle-time variability. Contact Metav Werkzeuge for tailored advice on GT9530 cermet inserts and application optimisation — info@metav-werkzeuge.com, +49 2822 7131930 Technical data Manufacturer article number: 6797214 SKU: 6797214-Tungaloy Manufacturer SKU: TUN6797214 Model series: ISO turning indexable inserts Grade/coating: GT9530 Material: cemented carbide Facts Insert designation: CNMG090408 Insert size: 09 Insert thickness: 4.76 mm Included angle: 80° Clearance angle: 0° Nose radius: 0.8 mm Special features Rhombic insert shape (CNMG) Double-sided chipbreaker With cylindrical hole for positive fixing Coated cermet for finishing/light universal turning of steel ISO compatibility depends on form, clearance, tolerance class, fastening, size and thickness FAQ What applications suit this insert best? The CNMG090408 GT9530 insert is intended for external and internal turning, especially finishing and light universal operations in steel where a fine surface finish and longer tool life are required. Which material grade does the insert use? This insert uses the GT9530 coated cermet grade, formulated for wear resistance and improved surface quality during finishing cuts. How is compatibility with toolholders determined? Compatibility is governed by the insert’s form, clearance angle, tolerance class, fastening method, size and thickness; matching these parameters ensures proper clamping and performance. Does the insert include a hole and what type is it? Yes — the insert is supplied with a cylindrical hole, designed for secure fixation in compatible indexable toolholders. Is the insert suitable for roughing? The GT9530 grade is optimised for finishing and light universal turning rather than heavy roughing; for heavy material removal a tougher grade is recommended. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090408 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of coated cermet performance and ISO compatibility for reliable finishing and extended tool life; the stable geometry and double-sided chipbreaker reduce downtime and operating costs. Order original Tungaloy inserts directly via Metav Werkzeuge or consult the team for application-specific guidance. CNMG 090408 GT9530 Tungaloy Turning Insert — Coated Cermet, 0.8 mm Corner Radius CNMG 090408 GT9530 is an ISO-standard rhombic turning insert designed for precision external and internal turning in stable machining conditions Coated cermet grade GT9530 ISO CNMG 090408 rhombic insert 0.8 mm corner radius for fine finishes Double-sided chipbreaker with cylindrical hole Consistent surface quality and prolonged tool life The GT9530 grade is a coated cermet engineered for low-wear finishing and light general-purpose turning where a high-quality surface finish matters. The combination of cermet chemistry and a tailored coating improves resistance to abrasive wear while maintaining sharp cutting edges; this results in fewer tool changes and more consistent part surfaces during series production. For operations where dimensional stability and surface integrity are priorities, the insert's polished edge geometry supports predictable cutting forces and smoother finish. ISO standard geometry for simple toolholder selection Supplied as an ISO CNMG 090408 format, the insert fits standard holders when shape, clearance angle, tolerance class, fastening method, size and thickness are matched. The rhombic form and central hole enable secure clamping on a wide range of external holders and boring bars. Stating the ISO designation simplifies procurement and ensures compatibility across tool systems, while the two-sided design provides economical indexable performance with repeatable seating and concentricity. Precision geometry that promotes process stability With a 0.8 mm corner radius, 4.76 mm thickness and an 80° approach angle, the geometry is tuned for stable cutting with reduced vibration and improved edge strength. The rake angle 0° offers a predictable cutting action across common steels, helping to maintain surface finish without excessive cutting forces. These features assist in achieving reproducible machining results, especially in applications where tool runout and fixture rigidity are controlled and where consistent tool life is essential for planning production cycles. Practical system considerations and handling benefits The insert forms part of a complete system: indexable plate, matching clamping kit or shim, fastening screws and the appropriate external holder or boring bar. The double-sided chipbreaker and cylindrical centre hole facilitate reliable seating and straightforward indexing, while the rhombic shape enables use in both external and internal turning. Operators benefit from reduced setup times and predictable replacement intervals, enabling smoother workflow planning and lower inventory complexity when using standard ISO formats. Contact Metav Werkzeuge for tailored advice on Tungaloy GT9530 inserts and to secure original CNMG090408 stock via Metav Werkzeuge; technical consultants are available by email or phone to discuss holder compatibility and process optimisation. Technical data Article number: 6735913 Manufacturer SKU: TUN6735913 SKU: 6735913-Tungaloy Model series: ISO indexable turning inserts Core specifications ISO designation: CNMG090408 Size: 09 (ISO) Thickness: 4.76 mm Corner radius: 0.8 mm Lead/approach angle: 80° Rake angle: 0° Hole style: cylindrical centre hole Chipbreaker: double-sided Shape: rhombic Application: Turning Materials & grade Grade: GT9530, coated cermet Material: cemented carbide FAQ What materials is this insert best suited for? The GT9530 grade is a coated cermet optimised for steel machining where good surface finish and extended life are required; it performs well in stable cutting conditions. How many cutting edges are available per insert? The double-sided geometry provides two usable cutting edges per indexable plate before regrinding or replacement is necessary. How does the ISO CNMG 090408 designation help when selecting a holder? ISO CNMG 090408 identifies the insert form and size so compatible holders can be selected based on shape, thickness (4.76 mm), clearance and clamping method to ensure correct fit and repeatability. What benefit does the 0.8 mm corner radius provide? A 0.8 mm corner radius balances edge strength with surface quality, reducing the risk of chipping while supporting finer surface finishes in finishing passes. Is the GT9530 insert suitable for heavy roughing? GT9530 is a wear-resistant finishing to light general-purpose grade; for heavy roughing, a tougher grade would be recommended to withstand higher mechanical loads. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090408 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of sharp cutting geometry, uncoated cermet NS9530 and reliable ISO compatibility for consistent finishing results; order the insert directly via Metav Werkzeuge or consult our specialists for holder compatibility and delivery. CNMG 090408 NS9530 indexable insert for turning – Tungaloy, rhombic form, 0.8 mm nose radius CNMG090408 NS9530 Tungaloy indexable insert for precision turning, designed as an ISO-standard rhombic insert for finishing steel components with continuous cuts and fine surface requirements Uncoated cermet NS9530 for finishing Sharp cutting edge and low cutting forces Double-sided chipbreaker for stable machining Rhombic CNMG form with cylindrical hole Consistent finishing performance for steel turning The uncoated cermet grade NS9530 is optimised for finishing operations on steel, delivering a sharp cutting edge and low cutting forces that together reduce vibration and improve surface quality. As a finishing grade, the material composition promotes a fine, consistent microfinish under continuous cutting conditions and small depths of cut. The combination of the grade and the insert geometry reduces the likelihood of built-up edge and supports longer intervals between tool changes, which improves process stability on medium- and high-speed lathes. Geometry and chip control that support productivity The insert’s rhombic CNMG outline and double-sided chipbreaker provide reliable chip control and allow economical indexable use. The 0.8 mm nose radius balances edge strength with the ability to achieve tight surface tolerances, while the cylindrical hole simplifies accurate clamping in compatible holders. Compatibility with a holder depends on form, clearance angle, tolerance class, fastening method, size and plate thickness; correct matching ensures the insert sits precisely and transmits cutting forces efficiently, thereby reducing chatter and wear. Application guidance and process advantages Designed for external and internal turning, this grade is particularly suitable for continuous cuts and small feed rates where surface finish is critical. The NS9530 composition and sharp edge reduce required cutting forces, which benefits thin-walled parts and delicate components by lowering distortion risk. Where a fine surface is the priority, select this finishing insert and adjust cutting parameters to moderate speeds and reduced feed to exploit the grade’s strengths while maintaining tool life. System integration and operational considerations The insert is part of an ISO insert system that comprises the indexable plate, a matching external holder or boring bar, and a clamping/shim set with replacement screws. When planning tool setups, ensure the holder accommodates the CNMG form and plate thickness (4.76 mm) and that the fastening method matches the insert’s hole style to maintain repeatable seating. Regular inspection of the clamping torque and replacement screws preserves positional accuracy; maintaining correct assembly supports consistent part quality and predictable tool change intervals. Contact Metav Werkzeuge for personalised compatibility checks and availability of Tungaloy inserts; technical advice and order support are available by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6708381-Tungaloy Manufacturer SKU: TUN6708381 Manufacturer article number: 6708381 Model series: ISO-Drehwendeschneidplatten ISO designation: CNMG090408 Facts Nose radius: 0.8 mm Plate thickness: 4.76 mm Insert size: 09 Cutting angle: 80° Clearance angle: 0° Hole style: cylindrical hole Special features Grade: NS9530 Cutting material type: uncoated cermet Insert form: rhombic Chipbreaker: double-sided Application: turning (external and internal) Material (substrate): carbide FAQ What materials is this insert suited for? The CNMG090408 NS9530 Tungaloy insert is specified as a finishing grade for steel, delivering low cutting forces and excellent surface finish for continuous turning operations. How does the 0.8 mm nose radius affect results? A 0.8 mm nose radius on the CNMG090408 provides a compromise between edge strength and surface finish, enabling tighter tolerances while maintaining sufficient robustness for finishing applications. Is the insert compatible with my holder? Compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness; Metav Werkzeuge can assist in confirming whether a specific holder matches the CNMG090408 dimensions and the cylindrical hole clamping. What advantages does the uncoated cermet NS9530 offer? The uncoated cermet NS9530 offers a sharp cutting edge and low cutting forces, which improve surface quality and reduce the tendency for built-up edge in finishing steel workpieces. Can the insert be rotated or indexed to use the opposite edge? The double-sided chipbreaker and CNMG geometry permit indexing to the opposing cutting edge, enabling economical use of both sides for consistent finishing performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090408 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a high-surface-finish cermet grade and low cutting forces for dependable finishing operations; order the insert directly via Metav Werkzeuge or consult the advisers for application-specific recommendations. CNMG090408 NS9530 Tungaloy — Indexable Turning Insert, NS9530 Cermet, 0.8 mm Radius, 80° CNMG090408 NS9530 Tungaloy is a precision finishing indexable insert designed for turning applications on steel and similar materials; rhombic form with a cylindrical hole ensures consistent clamping and repeatable results Precision finishing cermet grade NS9530 Rhombic insert, 80° geometry 0.8 mm corner radius for fine edges Cylindrical-hole design for secure clamping Consistent finishing performance with reduced cutting forces The NS9530 grade is an uncoated cermet developed for finishing cuts on Stahl, offering a sharp cutting edge and low cutting forces that translate into improved surface quality and reduced tool-induced vibration. In practice, this means fewer reworks and a more predictable process when machining continuous cuts or taking light passes. The insert’s geometry contributes to a stable chip flow, while the hard, wear-resistant substrate provides consistent edge life under the expected finishing conditions. As a result, the component surface finish and tolerance adherence are improved without aggressive cutting parameters. Compatibility and mounting for reliable production Being ISO-standardised, the rhombic CNMG form matches a broad range of standard toolholders; compatibility depends on form, clearance angle, tolerance class, clamping method, size and thickness. The 80° cutting-angle geometry and 0° rake angle are well suited to general-purpose turning holders and boring bars that accept the CNMG family. The cylindrical hole ensures secure, repeatable clamping and straightforward replacement during tool changes. Specifying the correct holder and clamping components avoids slippage and maintains cutting-edge stability, which is vital for keeping cycle times consistent on small-batch and serial production alike. Application focus and material suitability This finishing grade is aimed primarily at turning operations on Stahl where surface integrity and dimensional accuracy are priorities. The insert is particularly effective for continuous cutting and small depths of cut, where its sharp edge and cermet substrate produce a superior surface without the need for coating. While optimised for finishing, the geometry and double-sided chipbreaker allow for economical tool use by presenting multiple cutting edges. Selecting the NS9530 grade will be advantageous where minimal work hardening and fine surface roughness are required. Practical handling, productivity and process benefits With a 0.8 mm corner radius the insert balances edge strength and fine-detail finishing, enabling closer tolerance control on fillets and small-diameter features. The uncoated cermet chemistry supports consistent edge retention during low-cutting-force finishes, reducing the frequency of edge changes and helping maintain uptime. Process planners benefit from the ISO conformity of the insert family: tool setup is straightforward, spare management is simplified and spare-part interchangeability supports lean workshop logistics. The result is a measurable improvement in process reliability and part-to-part consistency. Contact Metav Werkzeuge for a tailored application check and to order the CNMG090408 NS9530 Tungaloy insert; email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt, technical assistance Technical data Article number: 6797237 Manufacturer SKU: TUN6797237 Model series: ISO-Drehwendeschneidplatten Application: Drehen Material: Hartmetall Grade: NS9530 Facts Corner radius: 0.8 mm Plate thickness: 4.76 mm Insert size: 09 Insert designation: CNMG090408 Cutting angle: 80° Rake angle: 0° Special features Rhombic insert form Cylindrical hole (with hole) Double-sided chipbreaker Uncoated cermet finishing grade ISO-standard indexable insert Suitable for continuous cutting and small depths of cut FAQ What materials is this insert suited for? The CNMG090408 NS9530 insert is a finishing grade optimised for turning Stahl and delivers high surface quality and low cutting forces when machining such materials. Is the insert coated? No; the CNMG090408 NS9530 is an uncoated cermet grade designed to provide a sharp edge and excellent surface finish in finishing operations. Which holder types are compatible with this ISO insert? Compatibility depends on the holder’s form, clearance angle, tolerance, clamping method, size and thickness; the CNMG090408 conforms to ISO CNMG dimensions and fits standard CNMG holders and boring bars. How does the 0.8 mm corner radius affect machining? A 0.8 mm corner radius offers a balance between edge strength and fine-surface capability, enabling closer tolerances on small features while maintaining acceptable edge life for finishing passes. Are there multiple cutting edges available on the insert? Yes; the double-sided chipbreaker design permits the use of multiple edges, improving economy by extending the number of indexable cutting edges per insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090408 NS9530 Wendeplatten - Tungaloy
Data inconsistency detected: one data field indicates the insert is made of cemented carbide while another specifies an uncoated cermet (NS9530) cutting grade; generation of a full product description is therefore not possible, as the conflicting information regarding the material composition and cutting grade creates ambiguity that cannot be resolved without additional clarification or verification of the correct specifications, which are essential for ensuring accurate identification, proper categorisation, and effective communication of the product's characteristics, properties, and intended applications to users or stakeholders who rely on precise and consistent data for decision-making, procurement, and operational purposes.
CNMG 090408 NS9530 Wendeplatten - Tungaloy
Take advantage of a finishing-grade, uncoated cermet insert that delivers low cutting forces and an excellent surface finish; combine the sharp cutting edge and 0.8 mm corner radius with a stable 4.76 mm plate thickness for consistent, productive turning operations. Order directly via Metav Werkzeuge or consult our technical advisers for selection support. CNMG 090408 NS9530 indexable turning insert – Tungaloy, uncoated cermet, finishing for steel CNMG090408 NS9530 Tungaloy insert suited for finishing and continuous turning operations on steel, designed as an ISO rhombic insert for compatible external holders and boring bars ISO rhombic insert CNMG 09 format Sharp uncoated cermet grade NS9530 Corner radius 0.8 mm for fine finishes Double-sided with cylindrical hole 4.76 mm plate thickness for stability Precision finishing with reduced cutting forces The NS9530 uncoated cermet grade is engineered for finish turning of steel, providing a consistently sharp cutting edge that reduces cutting forces and improves surface integrity. The rhombic geometry with an 80° included angle and a 0° relief angle supports continuous cuts and small depths of cut, making the insert particularly suitable where low vibration and tight dimensional tolerances are required. This translates into fewer reworks and a steadier process, which benefits throughput and lowers unit cost over production runs. Stable clamping and indexable economy A double-sided configuration with a cylindrical hole and a plate thickness of 4.76 mm gives reliable mounting and even load distribution in the seat, so tool life can be maximised while maintaining process security. The 0.8 mm corner radius is geared towards superior surface finish on precision components; when paired with an appropriate holder and clamping set, the insert enables repeatable, efficient machining cycles with predictable tool change intervals. Simple material matching and application guidance This finishing grade is optimised for steels and continuous cutting regimes; select an appropriate chipbreaker and match the sort to workpiece stability and machining strategy. The ISO designation reflects universal compatibility standards: the insert’s form, relief angle, tolerance class, fastening method, size and thickness determine holder fit. For operations on cast iron, aluminium or exotic alloys, choose a grade and geometry tailored to those materials rather than this finishing cermet. Productive surface quality and reproducible results By combining a sharp edge geometry with cermet’s intrinsic resistance to built-up edge, the insert supports high-quality surface finishes and dimensional consistency across batches. The design reduces the need for finishing passes in many cases, improving cycle times. Where exceptional surface integrity is essential, this insert can form part of a standardised tooling setup that delivers constant results and reduces process variability. Contact Metav Werkzeuge for tailored recommendations on tooling setups or to request assistance in specifying the optimal insert combination for the intended turning application; eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6797213-Tungaloy Manufacturer item number: 6797213 Manufacturer SKU: TUN6797213 Model series: ISO-Drehwendeschneidplatten Label: CNMG090408 NS9530 Tungaloy-Wendeplatte Facts Insert designation: CNMG090408 (ISO 090408) Corner radius: 0.8 mm Plate thickness: 4.76 mm Included angle: 80° Relief angle: 0° Hole style: with hole (cylindrical) Special features Material: cemented carbide (Hartmetall) base with uncoated cermet grade NS9530 Chipbreaker: double-sided Application: finishing turning on steel Geometry: rhombic insert, ISO format, indexable, double-sided Compatibility: designed for ISO-compliant external holders and boring bars FAQ What materials is this insert best suited for? The CNMG090408 NS9530 Tungaloy insert is formulated as a finishing grade for steel, offering low cutting forces and a sharp edge for continuous turning operations. Can the insert be used in standard ISO holders? Yes, the insert’s ISO rhombic form and specified thickness allow compatibility with ISO-compliant external holders and boring bars that match the size, thickness and clamping method. How does the 0.8 mm corner radius affect surface finish? A 0.8 mm corner radius on this cermet grade helps achieve a fine surface finish and reduces the need for secondary finishing passes when machining steel with stable cutting conditions. Is the insert coated or uncoated, and what does that mean for wear? The NS9530 grade is an uncoated cermet, which provides a very sharp cutting edge and excellent surface quality for finishing; it is optimised for continuous cuts rather than interrupted operations where coatings may offer additional protection. How many usable edges are available per insert? As a double-sided, indexable insert, the CNMG090408 offers multiple indexed cutting edges; exact count depends on the insert geometry and indexing practice for the toolholder system. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090408 NS9530 Wendeplatten - Tungaloy
Take advantage of the proven combination of precise finishing performance, economical double-sided use and wide holder compatibility for consistent production quality. Order the insert directly via Metav Werkzeuge or consult our specialists for tailored holder recommendations. CNMG 090408 NS9530 Tungaloy turning indexable insert — ISO CNMG finishing geometry The CNMG090408 NS9530 Tungaloy indexable insert is an ISO‑standard rhombic turning insert designed for precision finishing of steel components in continuous cutting operations. ISO CNMG 090408 geometry, rhombic 80° insert NS9530 uncoated cermet for finishing Sharp cutting edge for superior surface finish Double-sided chipbreaker, economical use Precision finishing with a cermet cutting edge The CNMG090408 NS9530 insert pairs an uncoated cermet grade with an ISO CNMG geometry to deliver low cutting forces and consistently high surface quality in finish turning. Cermet combines ceramic hardness with metal toughness: the result is a wear‑resistant cutting edge that maintains sharpness for longer when machining steel at low to moderate feeds. This behaviour reduces the need for frequent edge changes and supports reproducible component finishes, which is particularly beneficial in serial production where repeatability and surface integrity are required. Compatibility guidance for secure, repeatable clamping Compatibility with holders is determined by insert form, relief angle, tolerance class, fastening method, size and thickness; the CNMG shape and the 80° included angle allow secure seating in common outer holders and boring bars. The insert features a cylindrical centre hole for positive locating and a plate thickness of 4.76 mm, which together ensure stable clamping and repeatable axial positioning. When selecting a clamping system, match the holder pocket to the ISO CNMG geometry and verify the relief angle and tolerance class to avoid run‑out and vibration that would compromise finish quality. Efficient use and productivity advantages The double‑sided design with an integrated chipbreaker makes this insert an economical option: two usable cutting edges extend tool life per index and reduce tooling cost per component. The double‑sided chipbreaker is optimised for continuous cuts and small depths of cut typical of finishing operations, supporting consistent chip control and uninterrupted spindle time. For manufacturers seeking a balance between productivity and surface excellence, this grade reduces downtime for tool changes and contributes to steady cycle times on turning centres. Recommended applications and material scope This finishing grade is intended primarily for steel finish turning where a sharp edge and low cutting forces are priorities. The NS9530 cermet is particularly suited to continuous, stable cuts and small ap values; it performs best when interrupted cuts and heavy roughing are avoided. For mixed production where a range of steels is encountered, select matching chipbreaker styles and consider the holder rigidity to maintain the fine edge condition and achieve the expected high surface finish. Choose Tungaloy's NS9530 finishing grade for demanding turning applications — contact Metav Werkzeuge for application advice, matching holder recommendations or to order via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6944506 SKU: 6944506-Tungaloy Manufacturer SKU: TUN6944506 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Facts Geometry: CNMG 090408 (ISO) Included angle: 80° Corner radius: 0.8 mm Plate thickness: 4.76 mm Plate size: 09 Relief angle/free angle: 0° Hole: with hole — cylindrical hole Special features Grade: NS9530 Uncoated cermet cutting material Rhombic plate form Double-sided chipbreaker Designed for finishing of steel Compatible with ISO CNMG holders Typical system: insert + outer holder/boring bar + clamp/support parts FAQ What applications suit this insert best? The CNMG090408 NS9530 Tungaloy insert is optimised for finish turning of steel in continuous cutting conditions, offering a sharp edge and low cutting forces for high surface quality. Is the insert compatible with common CNMG holders? Yes — the insert follows the ISO CNMG 090408 geometry; compatibility depends on matching the holder pocket to the insert form, relief angle and tolerance class. How does the NS9530 grade affect tool life? The NS9530 uncoated cermet provides good edge life in finishing applications by maintaining a sharp cutting edge, reducing the frequency of indexing for consistent surface results. Can this insert be used for roughing or interrupted cuts? This grade is primarily a finishing sort; for heavy interrupted cuts or aggressive roughing, a more robust grade and different chipbreaker are recommended. What is the benefit of the double‑sided chipbreaker? The double‑sided chipbreaker offers two usable edges per face, improving economy and ensuring better chip control during finish turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090408 NS9530 Wendeplatten - Tungaloy
Benefit from the NS9530 uncoated cermet finishing grade and ISO CNMG090408 geometry for consistently high surface quality and reduced cutting forces; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. CNMG 090408 NS9530 Tungaloy turning insert — ISO finishing insert, 80° rhombic, uncoated cermet A CNMG 090408 NS9530 Tungaloy turning insert designed for finishing steel with low cutting forces and excellent surface results Uncoated NS9530 cermet finishing grade 80° rhombic geometry CNMG insert Double-sided chipbreaker design Cylindrical hole for secure clamping Consistent finishing performance for steel components The CNMG geometry combined with the NS9530 uncoated cermet provides a sharp cutting edge that reduces friction and enables a high surface finish on steel. This grade is optimised for continuous cuts and small depths of cut, so the result is a fine, consistent surface without excessive vibration. The low cutting forces associated with the cermet grade also reduce tool loading and help maintain machine stability during finishing passes, which translates directly into fewer reworks and predictable process outcomes. Secure clamping and ISO compatibility for easy integration The insert follows ISO dimensions and the rhombic CNMG090408 form, ensuring compatibility with a wide range of standard turning holders. The cylindrical hole and the plate’s 4.76 mm thickness allow reliable mechanical clamping and straightforward indexing. Compatibility is determined by holder form, clearance angle, tolerance class, fastening method, size and thickness; using the correct matching holder keeps the cutting geometry stable and streamlines tool changes on the shopfloor. Operational advantages and handling notes A 0.8 mm nose radius and the double-sided chipbreaker design make this grade particularly suited to finishing operations where surface integrity matters. The combination of cermet edge quality and CNMG geometry reduces burr formation and heat transfer into the workpiece, which benefits dimensional stability. Handling is simple: index the insert as per the holder’s instructions and monitor cutting parameters for continuous-cut conditions to achieve the intended performance and surface quality. For precise finishing with Tungaloy’s NS9530 CNMG 090408 insert, contact Metav Werkzeuge for tailored advice and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6966089-Tungaloy Manufacturer item number: 6966089 Manufacturer SKU: TUN6966089 Facts Geometry: CNMG 090408 (ISO CNMG090408) Cutting grade: NS9530 Nose radius: 0.8 mm Insert angle: 80° Clearance angle: 0° Thickness: 4.76 mm Plate size: 09 Special features Uncoated cermet finishing grade NS9530 Double-sided chipbreaker Cylindrical hole style Rhombic plate form Suitable for turning (external and internal) Model series: ISO turning inserts Material (body): cemented carbide FAQ Which materials is this insert intended for? The CNMG 090408 NS9530 Tungaloy insert is a finishing grade developed primarily for steel applications; the uncoated cermet composition yields low cutting forces and an excellent surface finish when used in continuous-cut conditions. What does the CNMG geometry mean for surface quality? The 80° rhombic CNMG geometry with a 0.8 mm nose radius provides a stable cutting edge and reduced edge loading, which together improve surface integrity and make the insert well suited to fine finishing passes. Is the insert indexable and reversible? Yes — the insert is double-sided with a chipbreaker on both cutting edges and features a cylindrical hole for secure clamping, permitting indexing to the second cutting edge for extended usage. Which holders are compatible with this insert? Compatibility requires an ISO CNMG holder matching the insert’s form, clearance angle, tolerance class, fastening and thickness; using the correct holder ensures the expected performance from the CNMG 090408 NS9530 Tungaloy insert (SKU TUN6966089). For which cutting conditions is this grade recommended? The NS9530 finishing grade is recommended for continuous cutting and small depths of cut where a fine surface finish and low cutting forces are priorities. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090408 T5115 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated cemented carbide, a 0° clearance angle and an 80° approach angle for dependable turning of cast iron; the geometry and double-sided chipbreaker support stable cutting and extended tool life. Order the CNMG090408 T5115 insert directly via Metav Werkzeuge or ask our consultants if needed. CNMG 090408 T5115 ISO turning insert by Tungaloy — CVD-coated cemented carbide, rhombic, with cylindrical hole for turning CNMG090408 T5115 is an ISO-format turning insert designed for general-purpose external and internal turning, offering a balanced combination of wear resistance and edge stability. CVD-coated cemented carbide grade T5115 Rhombic plate, 80° approach angle Double-sided chipbreaker for consistent chips Cylindrical hole, compatible with ISO holders Consistent performance for cast-iron turning The CNMG090408 is produced in a CVD-coated cemented carbide grade that is optimised for cast-iron machining, which provides a reliable balance between wear resistance and edge stability. The geometry—a rhombic plate with an 80° approach angle—delivers a robust cutting edge that reduces vibration in interrupted cuts and long overhangs. For engineers and shop managers, this means fewer tool changes and a steadier process, translating to higher throughput and predictable cycle times. Easy selection and holder compatibility Compatibility depends on form, clearance angle, tolerance class, fixing method, size and thickness; the plate’s 0° clearance angle and ISO format simplify matching with standard external holders and boring bars. The insert’s cylindrical centre hole enables secure clamping and repeatable seating, while the double-sided design allows indexing to a fresh edge without swapping insert types. This reduces inventory variety and simplifies tool management in production environments. Chip control and surface finish benefits The double-sided chipbreaker is engineered for controlled chip formation when turning cast iron, delivering consistent chip shapes that aid automated chip evacuation and protect the workpiece finish. Where surface quality matters, the combination of a stable cutting edge and the CVD coating helps achieve reliable results with reduced need for finishing passes. For operations seeking dependable parts per shift, this geometry supports steady productivity. Durability, process security and economical machining The CVD-coated grade T5115 emphasises long tool life under typical cast-iron conditions while maintaining edge robustness during moderate interruptions. The insert’s corner radius 0.8 mm supports a compromise between strength and form fidelity for common turning profiles. Selecting a suitably rated insert and maintaining consistent clamping ensures lower downtime and a favourable cost-per-part ratio over extended production runs. Contact Metav Werkzeuge for advice on inserting the Tungaloy CNMG090408 T5115 into the existing tool setup or to request a tailored quotation—Metav Werkzeuge is ready to support process optimisation Technical data Article number: 6735917 SKU: 6735917-Tungaloy Manufacturer SKU: TUN6735917 Model series: ISO-Drehwendeschneidplatten Full designation: CNMG090408 T5115 Tungaloy-Wendeplatte Numbers / Core technical data Plate size: 09 Plate thickness: 4.76 mm Corner radius: 0.8 mm Approach angle: 80° Clearance angle: 0° Designs / Special features Material: cemented carbide Coating: CVD coating Plate shape: rhombic Hole: with cylindrical hole Chipbreaker: double-sided Application: turning (external and internal) Grade: T5115 — universal for cast iron FAQ What materials is this insert suitable for? The CNMG090408 T5115 insert is specified as a universal grade for cast iron; its CVD-coated cemented carbide composition and chipbreaker geometry are optimised for reliable machining of cast-iron workpieces. How does the double-sided chipbreaker benefit production? A double-sided chipbreaker allows the insert to be indexed to a second cutting edge, enabling longer service life per insert and consistent chip control for safer automated machining. Which holder types are compatible with this insert? Compatibility is determined by form, clearance angle, tolerance class, fixing and plate size; the ISO format and cylindrical hole permit use with standard ISO external holders and appropriate boring bars designed for CNMG plates. What are the key dimensional values to check before fitting? Verify the plate thickness (4.76 mm), corner radius (0.8 mm), approach angle (80°) and clearance angle (0°) against the holder specifications to ensure correct seating and secure clamping. Can this insert be used for internal turning? Yes, the geometry and chip control features make the insert suitable for both external and internal turning operations when paired with the correct toolholder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090408 T515 Wendeplatten - Tungaloy
Take advantage of the combination of ISO compatibility, CVD-coated carbide T515 and a double-sided chipbreaker for efficient, repeatable cast iron turning. Order the insert directly via Metav Werkzeuge or consult the Metav team for application-specific advice. CNMG090408 T515 – ISO turning insert, CVD-coated carbide (Tungaloy) A CNMG090408 T515 indexable rhombic insert designed for economic external and internal turning of cast iron materials. ISO-compliant CNMG insert CVD-coated carbide T515 Double-sided chipbreaker Cylindrical-hole, rhombic form Consistent performance for cast iron machining The CVD-coated carbide grade T515 delivers a balance of wear resistance and cost-effectiveness that is well suited to machining cast iron. The coating provides a wear-resistant surface layer which contributes to longer tool life and consistent cutting conditions over production runs. As a result, cycle times can be stabilised and tool change frequency reduced, supporting predictable production planning and lower total machining costs. Stable seating and accurate repeatability in the toolholder The CNMG rhombic geometry combined with the cylindrical hole and standard ISO form ensures secure seating in compatible holders. The insert’s 0° clearance angle and 80° cutting edge orientation give stable contact and reduced vibration when clamped correctly; this leads to improved surface finish and repeatable component tolerance. Compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness, so matching the insert to the correct external holder is essential for best results. Practical setup and process advantages Being double-sided, the insert offers two cutting edges per index, which increases economical usage and reduces tooling cost per edge. The nominal thickness of 4.76 mm and corner radius 0.8 mm are defined to support a range of cutting parameters, including interrupted cuts when paired with the appropriate chipbreaker. The supply concept comprises the ISO insert plus a matching external holder, shim/underlay, clamping set and replacement screws, enabling quick replacement and minimal setup downtime. Application guidance and selection rationale This grade and geometry are recommended where efficient chip formation and stable machining of cast iron are priorities. Selection of the chipbreaker and grade should follow the expected component stability, the degree of cut interruption and the required cutting speed. When correctly specified, the insert contributes to improved process security and an overall reduction in machining cost per part, particularly for batch production and series turning. For robust cast iron turning, choose the Tungaloy CNMG090408 T515 insert and contact Metav Werkzeuge for tailored advice or order support — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data Article number: 6744993 Manufacturer SKU: TUN6744993 SKU: 6744993-Tungaloy Model series: ISO turning inserts Material: carbide Facts Thickness: 4.76 mm Corner radius: 0.8 mm Cutting edge angle: 80° Clearance angle: 0° Size: 09 Special features Grade: T515 Coating: CVD-coated carbide Shape: rhombic (CNMG) Hole: cylindrical hole Chipbreaker: double-sided Application: turning (external and internal) ISO-compatible insert system FAQ Which materials is this insert optimised for? The CNMG090408 T515 insert from Tungaloy is optimised for machining cast iron; the CVD-coated carbide grade provides reliable wear resistance for such materials. Can this insert be used on interrupted cuts? Yes, the CNMG090408 T515 is suitable for interrupted cuts when the correct chipbreaker and cutting parameters are selected for the component stability. How many usable edges are available per insert? The double-sided design offers two indexable edges; careful handling and correct clamping extend the serviceable life of each edge. What are the key dimensional data to check for holder compatibility? Check the ISO form, size (09), thickness (4.76 mm), corner radius (0.8 mm) and the cylindrical hole orientation to ensure precise fit in the chosen holder. What benefits does the CVD coating provide? The CVD-coated carbide enhances wear resistance and thermal stability under cutting conditions, contributing to consistent tool life and surface finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090408 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide grade T6215, reliable double-sided chip control and secure ISO compatibility for steady stainless‑steel turning. Order the CNMG090408 T6215 insert directly via Metav Werkzeuge or ask our consultants if needed. CNMG 090408 T6215 — Indexable turning insert for stainless‑steel machining by Tungaloy The CNMG090408 T6215 is an ISO‑format indexable insert for turning, optimised for stable to lightly interrupted machining of stainless steels and suited to both external and internal turning operations CVD‑coated carbide grade T6215 Double‑sided insert with chipbreaker ISO CNMG 090408, rhomboid form Secure clamping via central cylindrical hole Reliable performance for stainless‑steel turning The insert is manufactured from CVD‑coated carbide and specified as T6215, a wear‑resistant grade formulated for the demands of stainless steels. This composition provides a robust cutting edge that resists flank wear under steady cutting conditions, which translates into longer tool life and fewer insert changes on the shop floor. The coating reduces friction and helps maintain surface finish when finishing stainless materials, so cycle times remain predictable and production flow is more efficient. Consistent edge life and dependable chip control A double‑sided chipbreaker geometry ensures repeatable chip formation and evacuation, reducing the risk of built‑up edge and improving process stability. The insert’s 0.8 mm corner radius supports secure edge strength for mixed turning tasks, while the 4.76 mm thickness contributes to rigidity in the clamped assembly. Together these characteristics produce consistent component quality and lower the frequency of regrinding or replacement, supporting leaner tool management and reduced downtime. Practical compatibility and workshop benefits Designed to the ISO CNMG 090408 format with a rhomboid form and cylindrical central hole, the insert fits standard external holders and boring bars that match ISO dimensions. Compatibility is governed by form, clearance angle, tolerance class, fastening method, size and thickness, so selecting a correctly matched holder ensures secure clamping and repeatable positioning. The insert is reversible (double‑sided), offering economical indexability, and is particularly well suited to production runs where process reliability and predictable tool life are priorities. Choose the Tungaloy CVD‑coated grade T6215 for dependable stainless‑steel turning — contact Metav Werkzeuge for tailored advice or to place an order via info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: 6903015 Manufacturer SKU: TUN6903015 SKU: 6903015‑Tungaloy Model series: ISO‑Drehwendeschneidplatten Numbers / Core technical data Corner radius: 0.8 mm Plate thickness: 4.76 mm Insert size: 09 Clearance angle: 0° Included angle: 80° Designs / Special features Material: carbide Coating: CVD‑coated Grade: T6215 Shape: rhomboid (CNMG) Hole: cylindrical hole, with central bore Chipbreaker: double‑sided Application: turning (external and internal) Optimised for stainless steels and stable to lightly interrupted cuts FAQ What materials is this insert designed for? The CNMG090408 T6215 insert is formulated for machining stainless steels and performs best under stable to lightly interrupted turning conditions. How is the insert mounted and secured? The insert uses a central cylindrical hole and is clamped in ISO‑compatible holders designed for the CNMG 090408 format; correct holder selection ensures secure clamping and repeatable positioning. What are the key benefits of the T6215 grade? Grade T6215 delivers wear resistance and stable edge life on stainless steels, supported by a CVD coating that reduces friction and helps preserve surface finish. Is the insert reversible and economical to use? Yes — the insert is double‑sided, offering two indexed cutting edges per side where applicable, which improves economy per index and reduces tooling costs. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com