CNMG 090408 T6215 Wendeplatten - Tungaloy
Take advantage of CVD-coated carbide grade T6215 and a 0.8 mm corner radius for consistent performance when turning stainless steel; the ISO designation and rhombic geometry ensure straightforward holder compatibility and efficient chip control. Order the insert directly via Metav Werkzeuge or consult the technical team for application-specific recommendations. CNMG 090408 T6215 indexable insert for Turning — Tungaloy CNMG090408 T6215 is an ISO-standard indexable turning insert engineered for stable to lightly interrupted turning of stainless steel, combining a wear-resistant CVD coating with proven geometry for reliable machining. CVD-coated carbide T6215 for stainless steel ISO CNMG090408 rhombic insert, 80° lead angle Double-sided chipbreaker with cylindrical hole Longer tool life through a robust CVD coating The CVD-coated T6215 grade provides a balance of wear resistance and edge stability that is particularly suited to machining stainless steel under consistent cutting conditions. Chemical vapour deposition builds a hard, adherent coating layer that reduces flank wear and helps to maintain the cutting edge at higher temperatures than an uncoated substrate. For production environments where tool-change frequency affects cycle time, the coated carbide substrate translates into measurable process stability and lower tooling costs over time. Precise geometry that simplifies clamping and setup Built to ISO dimensions, the rhombic insert features a 80° approach angle, 0° clearance and a 0.8 mm corner radius, enabling predictable cutting behaviour and surface finish. The CNMG090408 format is compatible with standard ISO external holders and boring bars; compatibility depends on holder form, clearance angle, tolerance class, fastening and plate thickness. The insert’s cylindrical hole and double-sided design allow economical use of both cutting edges while keeping spare part inventories compact. Reduced setup complexity leads to faster changeovers and less downtime on the shop floor. Controlled chip formation for consistent finishes The double-sided chipbreaker geometry supports chip control in both external and internal turning operations, helping to avoid stringing and improving surface quality. Effective chip management reduces rework and protects the tool edge and workpiece, especially when machining longer parts or interrupted sections. For processes where surface integrity is critical, the combination of grade and chipbreaker delivers a reproducible finish with fewer corrective passes. Practical application and system considerations This insert is intended for turning operations on stainless steel under stable to mildly interrupted conditions; matching the chipbreaker and grade to the specific alloy and rigidity of the setup is essential for optimal results. The working system comprises the ISO indexable insert, a compatible external holder or boring bar, appropriate shim or clamp and replacement screws. Workshop and production engineers will value the insert’s predictable performance in serial production and job-shop environments where material variety and repeatability are priorities. Contact Metav Werkzeuge for application advice or to order the Tungaloy CNMG 090408 T6215 indexable insert; detailed technical support and fast supply options are available via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Manufacturer article number: 6903025 SKU: 6903025-Tungaloy Model series: ISO turning indexable inserts Material: carbide Core data Insert designation: CNMG090408 Corner radius: 0.8 mm Thickness: 4.76 mm Size: 09 Lead angle: 80° Clearance angle: 0° Hole: with cylindrical hole Special features CVD-coated grade T6215 Rhombic insert shape Double-sided chipbreaker Suitable for stainless steel Compatible with ISO holders, shims and clamps FAQ What materials is this insert suitable for? The insert is formulated for turning stainless steel; the T6215 CVD coating and carbide substrate are matched to the demands of stainless-steel machining. How does the CNMG090408 fit existing toolholders? Compatibility is governed by the holder form, clearance angle, tolerance class, fastening method, size and thickness; the insert follows ISO dimensions for straightforward mounting in standard holders and boring bars. What coating and grade does the insert use? The insert features a CVD-coated T6215 carbide grade designed to extend edge life and improve wear resistance in stainless steel applications. How many cutting edges are available per insert? The rhombic insert is double-sided, providing two usable cutting edges to maximise economical use per insert. What are the product identifiers for ordering? Article number 6903025 and SKU 6903025-Tungaloy identify the Tungaloy CNMG 090408 T6215 indexable insert for ordering and inventory control. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090408 T6215 Wendeplatten - Tungaloy
Take advantage of the CVD‑coated carbide grade T6215 and the proven CNMG geometry for consistent performance in stainless steel turning; the insert combines wear resistance, secure clamping and straightforward indexing for a reliable production flow. Order the item directly via Metav Werkzeuge or request technical advice from our consultants for holder compatibility and application optimisation. CNMG090408 T6215 – ISO indexable turning insert, CVD‑coated carbide, Tungaloy The CNMG090408 T6215 is an ISO rhombic indexable turning insert engineered for stable and lightly interrupted turning of stainless steels; suitable for external and internal turning when combined with the correct ISO holder and clamping set. CVD‑coated carbide grade T6215 Suited for stainless steel turning CNMG 09 size with 0.8 mm corner radius Cylindrical hole for secure clamping High wear resistance and predictable tool life The CVD‑coated carbide grade T6215 offers enhanced wear resistance specifically tuned for the demands of machining stainless steel. The chemical vapour deposition layer increases abrasion resistance and helps maintain the cutting edge under stable to lightly interrupted cut conditions. This translates into more consistent part tolerances and fewer insert changes, supporting continuous production and lower part cost per component. Geometry engineered for chip control and secure clamping The rhombic CNMG 09 geometry with a 0.8 mm corner radius and a double‑sided chipbreaker provides a balance between strength and finish. The chipbreaker promotes fragmenting and evacuation of chips when turning stainless steels, reducing heat buildup at the cutting zone. The insert’s cylindrical hole ensures reliable clamping in compatible ISO indexable holders, preserving repeatability and enabling safe indexing when one cutting edge is exhausted. Productivity advantages through stable cutting conditions Designed as part of an ISO insert system, the plate’s standard designation eases replacement and holder selection. Using a grade optimised for stainless steels reduces flank wear and the need for conservative feeds, so machining can maintain higher metal removal rates without sacrificing surface quality. The combination of geometry and coating supports improved cycle times and fewer unscheduled tool changes — a rational investment for batch and continuous production environments. System considerations and practical application guidance Compatibility with a specific holder is determined by form, clearance angle, tolerance class, fastening method, size and thickness; select an ISO external holder or boring bar that matches these parameters. The insert is double‑sided, permitting rotation to a fresh edge, and is intended for use with the correct underlay/clamp set and replacement screws. For internal turning, ensure adequate tool overhang and workpiece support to maintain the stable conditions this grade requires. For procurement of the Tungaloy CNMG090408 T6215 insert or for tailored advice on holder compatibility and application parameters, contact Metav Werkzeuge for prompt supply and technical support: info@metav-werkzeuge.com, +49 2822 7131930. Technical Data Article number: 6966086 Manufacturer SKU: TUN6966086 SKU: 6966086-Tungaloy Facts Corner radius: 0.8 mm Plate thickness: 4.76 mm Size (inscribed circle): 09 Wedge angle: 80° Clearance angle: 0° Special features CVD‑coated carbide grade T6215 Rhombic CNMG plate form Cylindrical hole for clamping Double‑sided chipbreaker Suitable for turning rostfreiem Stahl (stainless steel) Compatible with ISO indexable holder systems Material: carbide (Hartmetall) FAQ Which materials is this insert suitable for? The CNMG090408 T6215 insert by Tungaloy is optimised for machining stainless steel; the CVD coating and grade selection favour abrasion resistance in that material family. Is the insert indexable on both sides? Yes, the plate is double‑sided and may be indexed to a second cutting edge when the first shows wear, consistent with standard CNMG double‑sided inserts. How does the chipbreaker affect machining? The double‑sided chipbreaker on this CNMG geometry helps fragment chips and control evacuation, reducing heat concentration and improving surface finish during turning of stainless steels. What holder features are required for correct compatibility? Compatibility is governed by form, clearance angle, tolerance class, fastening, size and thickness; select an ISO holder matching these specifications for secure clamping of the CNMG090408 insert. Can this insert handle lightly interrupted cuts? Yes—Tungaloy’s T6215 grade and the CNMG geometry are designed for stable to lightly interrupted turning conditions, offering a balance of edge strength and wear resistance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090408 T6215 Wendeplatten - Tungaloy
CNMG 090408 T6215 – Tungaloy Wendeplatte für Drehen CNMG 090408 T6215 ist eine ISO-genormte Wendeplatte für Außen- und Innendrehen, entwickelt für die zuverlässige Bearbeitung von rostfreien Stahl unter stabilen bis leicht unterbrochenen Bedingungen. CNMG 090408 T6215 Wendeplatte von Tungaloy CVD-beschichtetes Hartmetall für hohe Standzeit Speziell für rostfreien Stahl, stabile Spanbildung Rhombische Form 09 mit zylindrischem Loch Doppelseitig, Eckenradius 0,8 mm, Freiwinkel 0° Produktivität und Standzeit gezielt erhöhen Die Kombination aus CVD-beschichtetem Hartmetall und der Sorte T6215 sorgt für eine hohe Verschleißfestigkeit und konstante Prozesssicherheit beim Drehen von rostfreiem Stahl. Durch die optimierte Spanbildung bleibt die Schneidkante länger stabil, was Stillstandszeiten reduziert und die Ausbringung pro Werkzeug erhöht. Das resultiert in messbarer Wirtschaftlichkeit bei wiederholten Serienläufen. Präzise Schneidkontrolle bei anspruchsvollen Werkstoffen Der Eckenradius 0,8 mm und die rhombische Form liefern eine belastbare Kantengeometrie, die bessere Oberflächen und reproduzierbare Toleranzen ermöglicht. Anwender profitieren von gleichmäßigen Schnittkräften und reduzierter Vibration, was besonders bei dünnwandigen oder schwer spanbaren Teilen die Prozessstabilität erhöht. Einfaches Integration in bestehende Haltersysteme Die ISO-Normgebung gewährleistet Kompatibilität zu gängigen Außenhaltern und Bohrstangen; wichtige Anpassungsgrößen sind Form, Freiwinkel und Dicke der Platte. Die zylindrische Lochung vereinfacht die Befestigung mit Standard-Unterlagen und Klemmsätzen, sodass Umrüstzeiten verkürzt und Rüstkosten gesenkt werden. Kurz erklärt: Beschichtung, Aufbau und Anwendungsvorteil Die CVD-Beschichtung (chemische Dampfabscheidung) bietet Verschleißschutz bei hohen Temperaturen und ist besonders geeignet für das kontinuierliche Drehen rostfreier Stähle. Die doppelseitige Ausführung ermöglicht einen wirtschaftlichen Einsatz durch einfaches Wenden der Platte. Insgesamt ergibt sich ein Werkzeugsystem, das auf Produktivität und konstante Ergebnisse ausgelegt ist. Empfehlung: Für zuverlässige Bearbeitung von rostfreiem Stahl empfiehlt sich die CNMG 090408 T6215 von Tungaloy — fragen Sie die Metav Werkzeuge Beratung unter info@metav-werkzeuge.com oder telefonisch +49 2822 7131930 an Technische Daten Artikelnummer: 6944490 Hersteller: Tungaloy Modellserie: ISO-Drehwendeschneidplatten Bezeichnung: CNMG090408 Fakten Radius: 0,8 mm Winkel: 80° Plattendicke: 4,76 mm Plattengröße: 09 Freiwinkel: 0° Besonderheiten Schneidstofftyp: CVD-beschichtetes Hartmetall (chemische Dampfabscheidung) Sorte: T6215 Plattenform: Rhombisch Loch: mit Loch, zylindrisches Loch Spanbrecher: doppelseitig Anwendung: Drehen Material: Hartmetall SKU Hersteller: TUN6944490 FAQ Welche Werkstoffe eignen sich für diese Wendeplatte? Die CNMG 090408 T6215 Tungaloy Wendeplatte ist speziell für rostfreien Stahl konzipiert und liefert dort stabile Spanbildung sowie gute Standzeiten. Ist die Platte in Standardhalter einsetzbar? Ja, die ISO-Normierung der CNMG 090408 T6215 erleichtert die Integration in gängige Außenhalter und Bohrstangen, wobei Form, Freiwinkel und Dicke beachtet werden sollten. Welche Vorteile bietet die CVD-Beschichtung? Die CVD-Beschichtung der CNMG 090408 T6215 gewährleistet hohen Verschleißschutz bei Thermikbelastung und trägt so zu längerer Werkzeugstandzeit bei. Kann die Platte gewendet werden und spart das Kosten? Die doppelseitige Ausführung der CNMG 090408 T6215 ermöglicht einfaches Wenden, was den Materialnutzen erhöht und Rüstkosten senkt. Welche Kantengeometrie eignet sich für feine Oberflächen? Der Eckenradius 0,8 mm der CNMG 090408 T6215 unterstützt feine Oberflächen und gleichmäßige Schnittkräfte für reproduzierbare Ergebnisse. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CNMG 090408 T6215 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide T6215 for reliable machining of rostfreier Stahl and the ISO compatibility of the CNMG090408 geometry to ensure predictable tool life and simple indexability; order the insert directly via Metav Werkzeuge or consult our specialists if further configuration advice is required. CNMG 090408 T6215 — ISO turning insert by Tungaloy CNMG090408 T6215 is an ISO-standard rhombic turning insert designed for robust performance in turning applications, particularly suited to rostfreier Stahl under stable to lightly interrupted cutting conditions. CVD-coated carbide grade T6215 for rostfreier Stahl ISO rhombic CNMG 09 geometry, 80° included angle Double-sided chipbreaker for indexable economy 0.8 mm corner radius and 4.76 mm thickness Consistent machining performance with CVD-coated carbide The combination of a CVD-coated surface and a wear-resistant carbide substrate in grade T6215 delivers extended flank and crater life when machining rostfreier Stahl. The hard, chemical-resistant coating reduces abrasive and adhesive wear, which results in steadier cutting forces and fewer tool changes. For production environments where predictable tool life supports cycle-time planning, this insert offers a clear efficiency advantage through reduced downtime and lower tooling consumption. ISO compatibility for flexible clamping and fast replacement As an ISO-standard indexable insert, CNMG090408 fits a wide range of commercially available holders when matched by form, relief angle, tolerance class, mounting and thickness. The ISO designation encodes the insert’s shape, size and corner radius, which simplifies holder selection and inventory management. The cylindrical locating/fastening hole and standard dimensions allow quick indexing and secure clamping, lowering the risk of chatter and improving process stability in routine turning operations. Cost-efficient productivity from double-sided geometry Being double-sided with a reversible geometry, the insert doubles the number of cutting edges per unit compared with single-sided designs, improving cost-per-edge economics. The built-in double-sided chipbreaker manages chip formation for typical turning tasks and helps maintain surface finish in stable setups. Combined with the 0° relief and the 80° included angle, the geometry supports robust engagement and consistent chip control, which together reduce cycle times and enhance overall throughput. Application guidance for best results This insert is intended primarily for external and internal turning of rostfreier Stahl under stable to slightly interrupted conditions; the selected grade and geometry are optimised for that combination. For best performance, use a rigid machine setup, appropriate coolant strategy and a holder that matches the insert form and tolerance class. The system build consists of the ISO insert, a matching external holder or boring bar, and the required clamp/fastening set with replacement screws to maintain repeatable seating and clamping force. For procurement or application support for the Tungaloy T6215 CNMG090408 insert, contact Metav Werkzeuge for tailored recommendations and immediate supply — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6966100 SKU: 6966100-Tungaloy Manufacturer SKU: TUN6966100 Designation: CNMG090408 T6215 Tungaloy insert Model series: ISO turning indexable inserts Dimensions & geometry Corner radius: 0.8 mm Thickness: 4.76 mm Included angle: 80° Relief angle: 0° Size: 09 Special features Material: carbide Coating: CVD Grade: T6215 Chipbreaker: double-sided Hole: with cylindrical hole Shape: rhombic (CNMG) Application: turning (external & internal) Compatible with ISO holders FAQ Is this insert suitable for machining stainless steels? Yes. The CNMG090408 in grade T6215 is a CVD-coated carbide insert optimised for machining rostfreier Stahl in stable to lightly interrupted conditions. How does the double-sided chipbreaker benefit production? A double-sided chipbreaker provides two usable cutting edges per indexed position, improving cost efficiency and reducing tooling changes for standard turning tasks. Which holders are compatible with this insert? Compatibility depends on holder form, relief angle, tolerance class, mounting method, size and thickness; the ISO designation of CNMG090408 facilitates selection of suitable holders. What are the key dimensions to check before ordering? Confirm the corner radius (0.8 mm), thickness (4.76 mm), size (09) and that the holder accepts an insert with an 80° included angle and a cylindrical locating hole. Can this insert be used for interrupted cuts? It is intended for stable to slightly interrupted cutting conditions; for heavy interruptions, consider a grade and geometry specifically designed for more severe impacts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090408 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide wear resistance, a 0.8 mm corner radius and ISO interchangeability for consistent machining of stainless steel; order genuine Tungaloy inserts conveniently via Metav Werkzeuge or request application advice from their consultants CNMG 090408 T6215 – Indexable insert for turning by Tungaloy The CNMG090408 T6215 is an ISO-standard indexable turning insert designed for reliable machining of stainless steels under stable to lightly interrupted cutting conditions ISO-standard CNMG shape, 80° cutting angle CVD-coated carbide grade T6215 for stainless steel Double-sided chipbreaker for consistent chip control Rhombic insert with 0.8 mm corner radius Outstanding wear resistance for turning stainless steel The CVD-coated carbide grade T6215 provides a durable cutting edge with improved resistance to abrasive and adhesive wear, which is particularly beneficial when machining stainless steel. The chemical and mechanical stability of the coating reduces built-up edge formation and helps maintain consistent surface finish over longer tool life. As a result, material removal rates can remain steady while downtime for tool changes is reduced, supporting efficient production cycles and predictable tool-change intervals. Stable machining through geometry and chip control Built as an ISO-standard CNMG insert with a double-sided chipbreaker, the geometry promotes reliable chip formation and evacuation. The cylindrical hole and standard ISO form enable secure clamping and quick indexability on compatible holders, allowing two usable cutting edges per face. These features together translate into reduced vibration, fewer interruptions for regrinding and a more uniform process window for turning operations, which is advantageous in batch production and repeatable series work. Geometry tuned for precision and flexibility The rhombic plate form delivers an effective compromise between accessibility and edge strength: the 80° cutting angle supports versatile engagement for both external and internal turning, while the 0.8 mm corner radius helps achieve balanced edge strength and surface quality. With a plate thickness of 4.76 mm, the insert provides stability in the tool pocket and resistance to mechanical distortion under moderate cutting forces. These dimensional features aid in achieving repeatable tolerances and improved surface integrity during finishing and light roughing passes. Practical guidance for selection and integration Compatibility with a toolholder depends on insert form, clearance angle (0°), tolerance class, fastening method, size and thickness; matching these parameters ensures correct seat fit and clamping stability. The insert is suitable for applications that demand good surface finish and consistent chip control; for more heavily interrupted cuts a different grade or geometry may be preferable. For tailored recommendations, Metav Werkzeuge can provide technical guidance on holder match, cutting data and process parameters to get the best results from this indexable insert Contact Metav Werkzeuge for application advice or to secure original Tungaloy CNMG 090408 T6215 inserts; the team offers technical consultation and prompt supply to support machining needs – info@metav-werkzeuge.com · +49 2822 7131930 Technical Data Article number: 6944505 Manufacturer SKU: TUN6944505 SKU: 6944505-Tungaloy Brand: Tungaloy Series: ISO-Drehwendeschneidplatten Facts Plate designation: CNMG090408 Grade/coating: T6215 (CVD-coated) Material: Hartmetall Plate size: 09 Thickness: 4.76 mm Corner radius: 0.8 mm Cutting angle: 80° Clearance angle: 0° Hole: with cylindrical hole Special features Rhombic plate form (CNMG) Double-sided chipbreaker ISO-standard turning inserts Designed for turning of stainless steel Suitable for stable to slightly interrupted cuts Compatibility defined by form, clearance, tolerance, fastening, size and thickness FAQ What materials is this insert best suited for? The CNMG090408 T6215 insert is intended primarily for machining stainless steel; the CVD-coated carbide grade T6215 improves wear resistance and reduces built-up edge during turning How does the double-sided chipbreaker benefit production? A double-sided chipbreaker extends usable edges per insert and ensures consistent chip formation, which maintains process stability and reduces the frequency of insert changes for turning operations Which holder characteristics must be checked for correct fit? Ensure the holder matches the ISO CNMG form, the 0° clearance, the plate thickness of 4.76 mm, the plate size and the fastening method; correct fitment secures clamping stability and repeatable performance Can this insert be used for interrupted cuts? The T6215 grade is engineered for stable to slightly interrupted cuts; for heavy interruptions alternative grades or geometries may be recommended to improve edge robustness Is the CNMG090408 T6215 reversible and indexable? Yes, the rhombic CNMG form with double-sided chipbreaker provides multiple usable cutting edges and enables simple indexing to restore a fresh edge Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090408 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of wear resistance, proven chip control and ISO compatibility for consistent turning performance. Order genuine Tungaloy inserts through Metav Werkzeuge or consult our specialists for application-specific recommendations. CNMG090408 T6215 Tungaloy indexable turning insert — CVD-coated carbide, 0° relief The CNMG090408 T6215 Tungaloy insert is an ISO-standard, rhombic indexable turning insert designed for external and internal turning of stainless steel under stable to lightly interrupted cutting conditions. ISO-standard rhombic insert CNMG geometry CVD-coated carbide grade T6215 0° relief angle for robust cutting Double-sided chipbreaker, with cylindrical hole High-performance wear resistance for stainless steel turning The CVD-coated T6215 grade delivers elevated wear resistance specifically tuned for machining stainless steel, providing longer tool life in demanding applications. The coating and substrate combination reduces flank and crater wear, which translates into fewer insert changes and more uninterrupted production time. With a focus on material-specific performance, this cutting grade is optimised for stable cuts and light interruptions, enabling more predictable tool life and a better return on tooling investment. Predictable geometry for stable cutting and surface quality The rhombic geometry with an 80° wedge angle and 0° relief gives a robust cutting edge that withstands radial loads while maintaining a controlled cutting direction. The 0.8 mm corner radius helps achieve a balance between edge strength and surface finish: larger radii increase edge stability, smaller radii favour finer finishes. Being an ISO-standard CNMG insert, compatibility with holders is determined by form, clearance, tolerance class, fastening and thickness, which simplifies selection and reduces the risk of mismatch when changing tools in the workshop. Reduced logistical effort and secure clamping in production As a double-sided insert with a cylindrical hole, the design halves the cost per edge and permits quick indexation for renewed cutting performance. The central hole ensures secure clamping with standard screws and clamping units, while the ISO-standard format integrates into established tool systems comprising insert, holder, shim and clamp. This configuration supports straightforward stocking, fast changeovers and consistent repeatability, which benefits small-batch flexibility and high-volume runs alike. Contact Metav Werkzeuge for technical advice or to arrange supply of genuine Tungaloy CNMG090408 T6215 inserts (SKU TUN6944530): info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6944530 Manufacturer SKU: TUN6944530 Insert designation: CNMG090408 Grade: T6215 Material: Carbide (CVD-coated) Facts Corner radius: 0.8 mm Thickness: 4.76 mm Insert size: 09 Wedge angle: 80° Relief angle: 0° Special features CVD-coated carbide Rhombic shape, with cylindrical hole Double-sided chipbreaker ISO-standard turning insert, compatible with standard holders FAQ What materials is this insert suited for? The CNMG090408 T6215 insert is engineered for machining stainless steel, offering wear-resistant performance under stable to lightly interrupted cutting. Can this insert be used on both external and internal turning operations? Yes; the indexable turning insert is suitable for both external and internal turning when mounted in a compatible external holder or boring bar. How is the insert secured in the holder? This insert features a cylindrical hole for screw clamping; secure clamping is achieved with standard screws, underlay and clamp sets appropriate for CNMG geometry. How many cutting edges are available per insert? Being double-sided, the insert provides multiple indexable edges to maximise edge life and reduce tooling cost per cutting edge. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090408 T6215 Wendeplatten - Tungaloy
The combination of a CVD-coated carbide T6215 grade and the CNMG geometry with an 0.8 mm nose radius and 80° approach angle delivers durable, consistent performance for turning stainless steels; order the insert directly via Metav Werkzeuge or consult our technical team for holder compatibility. CNMG090408 T6215 turning indexable insert — Tungaloy, CVD-coated carbide The CNMG090408 T6215 insert is a rhombic, ISO-standard indexable insert engineered for general-purpose external and internal turning of stainless steels under stable to lightly interrupted cutting conditions. CNMG 090408 geometry, 80° angle CVD-coated carbide grade T6215 Optimised for turning stainless steels Double-sided chipbreaker, cylindrical hole High wear resistance for reliable stainless-steel turning The CVD-coated T6215 grade provides enhanced wear resistance, extending tool life in demanding stainless-steel applications. The coating reduces flank and crater wear while the substrate carbide maintains edge stability, which together support longer uninterrupted production runs and fewer tool changes; this translates into improved process economy and predictable component quality. The result is a measurable performance advantage when machining corrosion-resistant alloys where built-up edge and work-hardening are common challenges. Precision geometry that ensures compatibility and repeatability The CNMG090408 geometry with an 80° approach angle and a 0.8 mm nose radius delivers a balance between strength and surface finish. The insert is rhombic in form and 4.76 mm thick, with a cylindrical hole and double-sided chipbreaker that facilitate indexing. Compatibility with clamping systems depends on form, relief angle, tolerance class, fastening method, size and thickness; checking these parameters ensures correct seating in the holder and consistent repeatability during batch production. The ISO-standard design simplifies tool procurement and replacement across machines. Practical application advice and process benefits Designed for both external and internal turning, the insert’s double-sided chipbreaker supports effective chip control in many stainless-steel turning operations. Selecting the appropriate chipbreaker geometry and grade for the workpiece material and stability of the setup will reduce vibration and improve surface quality. In stable to lightly interrupted cuts the combination of the CVD coating and carbide base delivers good edge retention and consistent results, making the insert suitable for medium to high-productivity environments where dependable performance and predictable tool change intervals are valued. For precise recommendations on holder selection or batch optimisation with Tungaloy indexable inserts, contact Metav Werkzeuge for specialised advice — info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6944549 Manufacturer SKU: TUN6944549 Model series: ISO turning indexable inserts Brand: Tungaloy Numbers / Core technical data Insert designation: CNMG090408 Grade / coating: T6215, CVD-coated carbide Thickness: 4.76 mm Nose radius: 0.8 mm Approach angle: 80° Relief angle: 0° Designs / Special features Rhombic insert shape Double-sided chipbreaker Cylindrical hole for clamping Suitable for turning stainless steels under stable to lightly interrupted conditions ISO-standard geometry for holder compatibility FAQ What materials is the CNMG090408 T6215 insert best suited for? The CNMG090408 T6215 indexable insert from Tungaloy is optimised for stainless steels, offering wear resistance and chip control under stable to lightly interrupted cutting conditions. How can compatibility with an existing holder be ensured? Compatibility depends on the insert’s form, relief angle, tolerance class, fastening, size and thickness; verify these parameters against the holder specification before fitting the CNMG090408 T6215 insert. Is the insert reversible or indexable on both sides? Yes, the CNMG090408 T6215 features a double-sided chipbreaker, enabling indexing and extending usable edge life per insert. What are the key geometry details to check when planning a process? Refer to the 80° approach angle, 0.8 mm nose radius, rhombic shape and 4.76 mm thickness when selecting feeds, speeds and clamping arrangements for consistent results. Can the CNMG090408 T6215 handle interrupted cuts? The grade is designed for turning under stable to lightly interrupted conditions; for heavy interruptions consider a different grade or enhanced clamping/stiffness in the setup. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090408 T6215 Wendeplatten - Tungaloy
Benefit from durable wear resistance and consistent chip control thanks to the CVD-coated carbide T6215 and an 80° rhombic geometry; the design supports productive stainless steel turning with predictable tool life. Order the inserts directly via Metav Werkzeuge or contact our consultants for application advice. CNMG090408 T6215 CNMG ISO-090408 turning insert, 80° rhombic — Tungaloy CNMG090408 T6215 is an ISO-format rhombic indexable insert engineered for external and internal turning of stainless steel under stable to lightly interrupted conditions CVD-coated carbide grade T6215 80° rhombic geometry for robust turning 0.8 mm corner radius for fine finishing Double-sided chipbreaker, reversible use Cylindrical hole for secure clamping Reliable wear resistance for stainless steel turning The CVD-coated carbide material combined with the T6215 grade provides enhanced abrasion resistance and thermal stability, making the insert especially suitable for machining stainless steel in continuous and lightly interrupted operations. The 80° rhombic geometry distributes cutting forces across a stable cutting edge, reducing vibration and enabling consistent surface quality. This wear behaviour leads to fewer indexings and longer productive cycles, which helps to lower overall machining costs while maintaining repeatable results. Seamless integration with ISO holders and predictable mounting Compatibility is governed by form, clearance angle, tolerance class, fastening, size and thickness; the CNMG format follows the ISO standard and therefore integrates easily with common external holders and boring bars. The insert’s 4.76 mm thickness and the cylindrical hole ensure secure clamping and correct seating; the 0° clearance angle aligns with typical CNMG holder designs. Reversible, double-sided geometry allows rapid indexing, reducing downtime and simplifying tool inventory management in mixed-production environments. Stable chip control and sustained productivity A double-sided chipbreaker tailored to this geometry promotes controlled chip formation for a range of feeds and depths of cut, improving evacuation and minimising re-cut chips on the workpiece. The modest 0.8 mm corner radius supports fine finishing while still offering edge strength for heavier passes when required. Together, these characteristics contribute to higher productivity and process reliability: improved cycle times, reduced tool changes and more consistent part quality, even when machining demanding grades of stainless steel. For reliable stainless steel turning with the Tungaloy T6215 grade, contact Metav Werkzeuge for tailored technical guidance or to place an order — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6944499 Manufacturer SKU: TUN6944499 Brand: Tungaloy Label: CNMG090408 T6215 Tungaloy insert Facts Geometry angle: 80° Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Size: 09 ISO code: 090408 Special features CVD-coated carbide grade T6215 Rhombic shape, 80° tool geometry Double-sided chipbreaker Cylindrical hole For external and internal turning of stainless steel FAQ What materials is this insert suitable for? The CNMG090408 T6215 insert from Tungaloy is designed primarily for machining stainless steel under stable to lightly interrupted cutting conditions; the CVD coating and carbide base offer good wear resistance on such alloys. How is the insert secured in the holder? Clamping is achieved via the centred cylindrical hole and the ISO CNMG pocket in compatible holders; correct seating depends on matching holder form, tolerance class and fastening method. Can the insert be indexed to use the other cutting edge? Yes, the insert is double-sided and reversible; indexing provides a rapid edge change and extends usable life before disposal. What surface finish can be expected with a 0.8 mm corner radius? A 0.8 mm corner radius balances edge strength and finishing capability; it supports fine surface finishes at modest feeds while still tolerating medium cuts when required. Is this insert compatible with standard ISO CNMG holders? The insert follows ISO dimensions for the CNMG090408 format, so it is compatible with standard holders provided the holder’s form, clearance angle and tolerance class match the insert specifications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090408 T9205 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated T9205 wear-resistant grade, an ISO CNMG geometry and a secure cylindrical fixing to ensure reliable, productive turning of steel in stable setups; order directly via Metav Werkzeuge or consult the team for application-specific advice. CNMG 090408 T9205 turning insert for turning — Tungaloy A CNMG 090408 T9205 indexable turning insert engineered for productive external and internal turning of steel with a robust, CVD-coated carbide grade for higher cutting speeds and stable chip control CVD-coated carbide T9205 for steel machining Double-sided chipbreaker for stable chip control ISO rhombic CNMG geometry for wide compatibility Cylindrical hole and 0° relief for secure fixing Optimised grade for productive steel turning The insert is delivered in the T9205 grade, a CVD-coated carbide designed for wear-resistant, high-productivity turning of steel under stable machining conditions. The coating and substrate combination reduces flank wear and extends tool life at higher cutting speeds, which translates into fewer insert changes and increased uptime on medium- to high-volume turning operations. Explained simply: the coating resists abrasion while the carbide core maintains edge integrity, so workpieces benefit from steady performance and predictable tool replacement intervals. Geometry and clamping that support process reliability Built to ISO standards, the CNMG rhombic form provides a versatile included angle that suits many external and internal turning tasks. The insert features a 0° relief and a cylindrical hole for positive clamping in compatible holders, ensuring accurate repeatability and minimal movement under cutting loads. The combination of CNMG geometry and a secure fixing system reduces vibration and promotes consistent surface finish, making the grade particularly suitable where dimensional consistency is required across batch runs. Chip control and edge preparation for consistent results Equipped with a double-sided chipbreaker, the insert delivers controlled chip formation tailored to general steel applications; this reduces entanglement and supports safer, automated swarf handling. The specified corner radius 0.8 mm helps achieve a balance between edge strength and surface finish, offering improved edge durability on interrupted cuts while still enabling acceptable finish levels on continuous cuts. Where tool life and stable machined quality are priorities, this combination directly contributes to lower overall machining costs per component. Practical integration into a production setup The insert is part of an ISO insert system and requires a compatible external holder or boring bar, plus the usual clamping set and screws for assembly. With a 4.76 mm plate thickness and standard CNMG sizing, integration into existing tool families is straightforward: holders that accept CNMG090408 geometry will generally be compatible provided form and tolerance match. Specifying this insert supports streamlined inventory management because the ISO standardisation enables cross-compatibility across multiple machines and tool lines. Contact Metav Werkzeuge today for machine-specific recommendations, stock availability and application support for Tungaloy turning inserts — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: 6785658 Manufacturer SKU: TUN6785658 Model series: ISO turning inserts Designation: CNMG090408 Grade: T9205 Material: carbide Application: turning Numbers / Core technical data Included angle: 80° Relief angle: 0° Corner radius: 0.8 mm Thickness: 4.76 mm Size: 09 Special features / Versions CVD-coated carbide Double-sided chipbreaker Rhombic shape (CNMG) With cylindrical hole ISO-standardised insert Suitable for stable, higher-speed steel turning FAQ What materials is this insert best suited for? The CNMG090408 in T9205 grade is optimised for turning steel under stable machining conditions; its CVD-coated carbide composition delivers wear resistance appropriate for higher cutting speeds on steel. Will the insert fit existing CNMG holders? Yes — the insert follows ISO CNMG geometry and is compatible with holders and boring bars designed for CNMG090408 inserts, provided the holder's form, relief and tolerance class match the specification. How does the chipbreaker affect performance? The double-sided chipbreaker on this insert promotes controlled chip formation and reliable evacuation, which improves process stability and reduces the risk of chip-related interruptions during batch turning operations. What edge radius and plate thickness are specified? This insert has a corner radius of 0.8 mm and a plate thickness of 4.76 mm, a combination that balances edge strength and achievable surface finish for general steel turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090408 T9205 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide wear resistance, an 80° insert geometry and a precise 0.8 mm nose radius for productive, repeatable turning of steel; order the CNMG 090408 T9205 insert through Metav Werkzeuge or consult our specialists for application advice. CNMG 090408 T9205 — ISO turning insert for productive steel turning, Tungaloy CNMG 090408 T9205 is an ISO‑standard turning insert designed for external and internal turning operations in steel, optimised for stable setups and higher cutting speeds. ISO geometry for standard toolholders CVD‑coated carbide for wear resistance Double‑sided chipbreaker for consistent chips 0.8 mm nose radius for reliable edge strength Consistent productivity with optimised grade and geometry The combination of a CVD coating and a wear‑resistant carbide substrate delivers extended edge life under productive cutting conditions. The grade is formulated to perform in steel machining where stability and elevated cutting speeds are prioritised, reducing intervention intervals and improving tool‑change predictability. The 80° approach angle and defined 0.8 mm nose radius provide a balance between surface finish and edge robustness, meaning fewer rejects and steadier cycle times in series production. Secure clamping and broad holder compatibility Designed to fit ISO‑standard toolholders, the insert’s rhombic profile and central cylindrical hole ensure accurate seating and repeatable clamping. Compatibility is governed by form, relief angle, tolerance class, fastening method, size and thickness—features that simplify toolroom planning and minimise downtimes when replacing inserts. The double‑sided design offers economical use of the cutting edge, as both faces are usable before indexation. Clear technical advantages for process reliability The 0° clearance (frewinkel) combined with the plate thickness of 4.76 mm provides rigidity in the cutting zone, reducing vibration and improving dimensional stability. The double‑sided chipbreaker supports controlled chip formation when machining typical steels, lowering the risk of chip entanglement and improving surface consistency. For applications with clamped, rigid setups, this insert supports higher feed or speed inputs while maintaining predictable wear behaviour. Choosing and applying the insert for best results Select the T9205 chipbreaker and grade when machining steel under stable conditions and aim for higher cutting speeds; the insert is optimised for this scenario. For finish and form accuracy, the modest 0.8 mm nose radius helps retain edge strength without sacrificing surface quality. When selecting feeds and speeds, prioritise machine and fixture stiffness—this insert yields its best economy in rigid, controlled setups where tool life and cycle time improvements translate directly into lower production costs. For high‑productivity steel turning with Tungaloy’s T9205 grade, contact Metav Werkzeuge for tailored application recommendations and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6785657 Manufacturer SKU: TUN6785657 Label / SKU: 6785657-Tungaloy Designation: CNMG090408 Model series: ISO‑turning indexable inserts Facts Insert designation: CNMG 090408 Insert size: 09 Plate thickness: 4.76 mm Nose radius: 0.8 mm Clearance angle: 0° Approach angle: 80° Special features Material: carbide Coating: CVD Grade / sort: T9205 Chipbreaker: double‑sided Hole: with cylindrical hole Plate shape: rhombic FAQ What materials is this insert suitable for? This insert is formulated for steel machining; the T9205 grade and CVD‑coated carbide substrate deliver wear resistance for productive turning of steel. How is the insert mounted and indexed? The CNMG 090408 insert uses a central cylindrical hole and rhombic geometry for standard ISO holders, allowing secure clamping and double‑sided indexing before replacement. What advantage does the T9205 grade provide? T9205 offers a wear‑resistant, CVD‑coated carbide composition optimised for higher cutting speeds and stable turning conditions, improving tool life and productivity. Can the insert be used for internal turning as well as external turning? Yes, the ISO geometry and compact nose radius make the insert suitable for both external and internal turning operations when paired with an appropriate holder and rigid setup. What surface finish can be expected with a 0.8 mm nose radius? A 0.8 mm nose radius provides a good compromise between edge strength and surface quality, enabling consistent finishes in typical steel turning tasks when feeds and speeds are matched to the setup. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMG 090408 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide wear resistance, a robust 0.8 mm corner radius and ISO compatibility for dependable medium-steel turning. Order the insert directly via Metav Werkzeuge or consult our application engineers for process optimisation. CNMG090408 T9215 turning insert — Tungaloy — ISO rhombic 80° geometry for turning CNMG090408 T9215 Tungaloy turning insert designed for medium-steel turning with a double-sided chipbreaker and cylindrical hole for secure clamping ISO CNMG090408 format, rhombic 80° geometry CVD-coated carbide T9215 for medium steel Double-sided chipbreaker, with cylindrical hole 0° clearance angle, 0.8 mm corner radius High productivity and predictable tool life for medium-steel turning The combination of CVD-coated carbide and the T9215 grade offers a balance between wear resistance and fracture toughness that supports high productivity in continuous to lightly interrupted cuts. The rhombic 80° geometry increases the effective cutting edge strength, while the 0.8 mm corner radius reduces the risk of edge chipping when machining interrupted sections. These attributes translate into longer intervals between indexings and more stable cycle times in serial turning operations. Robust edge control and reliable chip formation A double-sided chipbreaker matched to the grade promotes controlled chip formation across typical turning feeds used on medium steels. The insert’s 4.76 mm thickness and the presence of a cylindrical hole for positive locating minimise vibration in the tool assembly and enhance repeatability. The 0° clearance angle is advantageous where a neutral rake and stable contact with the workpiece are required, contributing to consistent surface finish and reduced process variation. Seamless integration with ISO tooling systems for rapid changeovers The ISO standardisation of the insert simplifies toolholder selection and machine setup: compatibility is determined by form, clearance, tolerance class, fastening, size and thickness. The CNMG090408 format fits a wide range of CNMG holders used in modern lathes, allowing fast replacement and minimal downtime during tool change. Clear labelling and standard dimensions support inventory management and ease of procurement for production environments. Practical guidance for machining and application security For the best results in medium-steel turning, combine the T9215 grade with a chipbreaker that suits the chosen feed and depth of cut; the insert excels in applications where a balance of wear resistance and toughness is required. Selection of the correct holder and stable workpiece clamping further enhances the advantages of the insert, reducing chatter and improving tool life. For process validation or parameter tuning, Metav Werkzeuge’s technical team can provide application-focused advice to match the insert’s properties to the machining task. Contact Metav Werkzeuge for tailored application support or to secure the Tungaloy CNMG090408 T9215 insert for current production needs; our consultants assist with parameter selection and inventory planning Technical data Article number: 6944527 Manufacturer SKU: TUN6944527 Metav SKU: 6944527-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: CNMG090408 Label: CNMG090408 T9215 Tungaloy-Wendeplatte Manufacturer: Tungaloy Core data Corner radius: 0.8 mm Geometry angle: 80° Thickness: 4.76 mm Clearance angle: 0° Size: 09 Special features Material: carbide Grade/coating: T9215 (CVD-coated carbide) Chipbreaker: double-sided Hole: with hole Hole style: cylindrical hole Plate form: rhombic Application: turning FAQ What materials is this insert intended for? The Tungaloy CNMG090408 T9215 insert is specified for medium-steel applications; the T9215 grade combines wear resistance and toughness suitable for a broad range of steel alloys. Can the insert be used for interrupted cuts? Yes, the CVD-coated T9215 grade provides fracture resistance appropriate for continuous to light interrupted cutting conditions in turning operations. Which toolholders are compatible with this insert? Compatibility depends on holder form, clearance, tolerance class, fastening and thickness; the ISO CNMG090408 format is suitable for standard CNMG holders when those dimensions match. How does the 0.8 mm corner radius affect performance? A 0.8 mm corner radius increases edge strength and improves resistance to chipping, offering a compromise between a robust edge and achievable surface finish. Is the chipbreaker design reversible or single-use? The insert is double-sided with a chipbreaker on each cutting edge, allowing indexing to the second edge and extending usable tool life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090408 T9215 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide T9215 and ISO conformity for reliable medium-steel turning; the insert delivers high wear resistance and fracture toughness for productive continuous to lightly interrupted cuts. Order directly via Metav Werkzeuge or consult our technical advisors for application-specific recommendations. CNMG 090408 T9215 Tungaloy indexable insert for turning, CVD-coated carbide The CNMG090408 T9215 is an ISO-standard indexable turning insert engineered for productive external and internal turning of medium steels, offering a balance of wear resistance and breakage safety in continuous to lightly interrupted operations. CVD-coated carbide grade T9215 ISO CNMG090408 rhombic geometry 0° clearance angle for stable cutting Double-sided chipbreaker, 0.8 mm radius Increased throughput through a wear-resistant grade The primary advantage of the T9215 grade is its combination of high wear resistance and fracture toughness, achieved by a CVD coating on a carbide substrate. This characteristic reduces the frequency of index changes and keeps cycle times low, which directly improves cost per part in series production. For operations that run continuously or with light interruptions, the material choice supports longer uninterrupted tool life and consistent dimensional stability, helping to maintain throughput targets and predictable maintenance intervals. Precise geometry for consistent surface finish The rhombic CNMG geometry with an 80° included angle, 0.8 mm corner radius and a 4.76 mm plate thickness provides a stable cutting edge and predictable engagement with the workpiece. The 0° clearance angle and the cylindrical locating hole ensure reproducible seating in compatible clamping systems. These design choices translate into improved surface quality and repeatable part tolerances, particularly when paired with the correct holder geometry and tolerance class. Technical terms: the corner radius affects edge strength and finish, while plate thickness contributes to rigidity in heavy feed conditions. System compatibility and economical handling As an ISO turning insert, the component is compatible with a wide range of external holders and boring bars when holder form, relief angle, tolerance class, fastening method, size and thickness match. The insert is double-sided with a dual chipbreaker, allowing indexing to a fresh cutting edge and halving the cost per usable edge versus single-sided variants. The cylindrical hole facilitates secure clamping; spare screws and proper underlay or clamp sets help ensure repeatable mounting without time-consuming adjustments. Selection of the correct chipbreaker style remains essential for chip control and process stability. Practical benefits from grade and design choices Choosing this Tungaloy grade and geometry supports a productive machining strategy: stable chip formation, reduced edge chipping risk and straightforward integration into common ISO tool systems. The CVD coating enhances thermal and abrasive resistance, while the substrate provides the necessary toughness for interrupted cuts. For workshops seeking predictable tool life and consistent results on medium steels, this insert offers a practical balance of performance and economy without complex handling or special coolant requirements. For reliable medium-steel productivity, request the Tungaloy CNMG090408 T9215 via Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for ordering and application advice Technical Data Article number: 6966098 Manufacturer SKU: TUN6966098 SKU: 6966098-Tungaloy Model series: ISO turning inserts Designation: CNMG090408 Name: CNMG090408 T9215 Tungaloy indexable insert Core specifications Material: carbide Coating: CVD Grade: T9215 Corner radius: 0.8 mm Plate thickness: 4.76 mm Clearance angle: 0° Included angle: 80° Size code: 09 Hole: with cylindrical hole Chipbreaker: double-sided Application: turning Design features Rhombic insert geometry Double-sided indexing for two usable edges Compatibility depends on holder form and tolerance class Suitable for continuous to light interrupted cuts Optimised for medium-steel machining FAQ What materials is this insert best suited for? The insert is optimised for medium-steel machining; the T9215 grade combines wear resistance and toughness for productive turning of steel. Is the CNMG090408 compatible with standard ISO holders? Yes, the CNMG090408 follows ISO geometry standards; compatibility depends on matching holder form, relief angle, tolerance class, fastening method, size and thickness. How does the CVD coating improve performance? The CVD coating on the carbide substrate increases thermal and abrasive resistance, extending edge life and supporting higher cutting volumes with stable chip formation. Can the insert be indexed to a fresh edge? The component is double-sided and permits indexing to an unused cutting edge, effectively doubling the number of usable edges compared with single-sided plates. Which chipbreaker should be selected for mixed operations? Choose the chipbreaker variant that matches the material, feed and stability requirements; the supplied double-sided chipbreaker offers flexibility for typical turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090408 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide wear resistance, a robust 0.8 mm nose radius and ISO compatibility for efficient medium-steel turning; order the insert directly via Metav Werkzeuge or ask the consultants if needed. CNMG090408 T9215 ISO rhombic turning insert by Tungaloy — CVD-coated carbide, 0.8 mm radius A CNMG090408 T9215 ISO rhombic turning insert designed for medium-steel turning, suitable for continuous to lightly interrupted cuts and compatible with standard external holders and boring bars CVD-coated carbide T9215, high wear resistance Optimised for medium steel machining ISO rhombic CNMG 09 insert with cylindrical hole 0.8 mm nose radius, 80° lead angle Increased productivity for medium-steel operations The CVD-coated grade T9215 combines high wear resistance with improved fracture safety, making it a sound option for productive turning in medium-strength steels. The grade is engineered for sustained cutting performance during continuous or slightly interrupted cuts, so tool change intervals can be extended and cycle times reduced. The combination of a robust cutting geometry and a protective coating enables higher cutting data while maintaining component quality, which supports reliable process throughput and consistent surface finish. Secure seating and straightforward tool system integration ISO standardisation ensures predictable fit and repeatable mounting in properly matched toolholders; compatibility is governed by insert form, clearance angle, tolerance class, fastening method, size and thickness. The rhombic CNMG form and its cylindrical hole allow positive clamping in many external holders or boring bars, while the plate thickness of 4.76 mm gives axial rigidity under higher feed and depth of cut. For practical toolroom setup, the system consists of the insert and a matching outer holder or boring bar, plus a shim/clamping set and replacement screws for rapid changeover and secure seating. Consistent chip control and application guidance The double-sided chipbreaker offers repeatable chip formation for common turning tasks, improving swarf control in both external and internal turning. With a 0.8 mm corner radius and an 80° lead geometry, the insert balances edge strength and surface finish, delivering dependable results when finishing or performing light to medium roughing. The CVD layer enhances adhesion and wear protection: in plain terms, the coating reduces crater wear and helps maintain the cutting edge at higher material removal rates. For selection, match the chipbreaker and grade to the workpiece material, machining parameters and machine rigidity to obtain the intended productivity gains. For enquiries about stock availability, recommended cutting data for specific steel grades, or tailored tooling solutions with Tungaloy's T9215 inserts, please contact Metav Werkzeuge for fast advice and ordering at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6782310 SKU: 6782310-Tungaloy Manufacturer SKU: TUN6782310 Manufacturer: Tungaloy Model series: ISO-Drehwendeschneidplatten Name: CNMG090408 T9215 Tungaloy insert Facts Corner radius: 0.8 mm Lead angle: 80° Clearance angle: 0° Thickness: 4.76 mm Size designation: 09 Special features CVD-coated carbide Grade T9215 — for medium steel machining Double-sided chipbreaker Rhombic CNMG geometry With cylindrical hole for positive clamping System includes matching outer holder or boring bar, shim/clamping set and spare screws FAQ What materials is this insert suitable for? The CNMG090408 T9215 insert is optimised for medium steel machining; the T9215 grade pairs CVD-coated carbide with geometry tailored to typical carbon and alloy steels. Can the insert be used for interrupted cuts? Yes — the T9215 grade and the robust 0.8 mm corner radius provide good fracture resistance for light to moderate interrupted cutting conditions. How is compatibility with toolholders ensured? Compatibility depends on ISO form, clearance angle, tolerance class, fastening method, size and thickness; the CNMG090408 form and cylindrical hole suit standard external holders and boring bars. What benefit does the CVD coating provide? The CVD-coated layer on this grade reduces crater wear and improves edge life, allowing higher cutting data with more consistent tool performance in continuous applications. Is the insert reversible or single-use? The rhombic CNMG shape with double-sided chipbreaker is indexable; both sides can be used until geometrical limits are reached, enabling economical usage of the insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090408 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide T9215, a rhombic CNMG090408 form and a stable 0.8 mm corner radius to increase throughput in medium-steel turning; order directly via Metav Werkzeuge or contact our consultants for process guidance. CNMG 090408 T9215 Turning — Tungaloy indexable insert for turning CNMG090408 T9215 Tungaloy indexable insert for ISO‑standard turning applications, engineered for medium steel machining with a robust, CVD‑coated cemented carbide grade. CVD-coated carbide grade T9215 Rhombic CNMG090408 form with hole 0.8 mm corner radius for edge strength Double-sided chipbreaker for productivity Increased productivity with a wear‑resistant grade The T9215 grade combines a CVD coating with a tough cemented carbide substrate, providing a measured balance between wear resistance and fracture toughness. For shops focused on sustained material removal rates, this means fewer indexings and less unplanned downtime. The coating reduces abrasive wear on the cutting edge while the substrate absorbs intermittent shock, making the insert particularly well suited to continuous and slightly interrupted turning cycles. The result is a predictable tool life and consistent component quality. Secure seating and ISO compatibility for stable machining Designed in the ISO CNMG family, the rhombic CNMG090408 form and the cylindrical‑hole fastening ensure compatibility with a wide range of ISO‑compliant holders. Correct fit is determined by form, clearance angle, tolerance class, fastening method, size and thickness; a compliant system reduces chatter and improves surface finish. The 0° clearance angle and 80° included angle contribute to a stable contact geometry, which supports repeatable set‑ups and straightforward tool management across production batches. Optimised geometry for medium steel and robust cutting The double‑sided chipbreaker geometry and the 0.8 mm corner radius offer a compromise between strength and profile accuracy: the radius provides enhanced edge strength for semi‑roughing, while the chipformer helps control swarf and maintain consistent cutting forces. In practice, this means improved cycle times on shaft turning and facing operations in medium‑hard steels, with fewer tool‑related rejections and better surface integrity on the finished part. Practical handling and predictable tool life With a plate thickness of 4.76 mm and a compact size 09 form factor, the insert is easy to store and rotate for full utilisation of both cutting faces. The CVD coating simplifies reconditioning timelines by delaying flank wear, and the double‑sided format doubles the available cutting edges per insert. For production planners this yields a straightforward stock rotation and predictable replacement intervals, supporting efficient inventory control and lower overall machining costs. Contact Metav Werkzeuge today for tailored toolholder recommendations and to discuss process parameters for the CNMG090408 T9215 Tungaloy indexable insert — Metav Werkzeuge can advise on optimal feeds, speeds and clamping for your turning application and is available at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6772149 Manufacturer SKU: TUN6772149 Model series: ISO‑turning indexable inserts Material: carbide Grade / coating: T9215, CVD‑coated Technical specifications Plate designation: CNMG090408 Size: 09 Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Included angle: 80° Special features Rhombic plate form Cylindrical hole for fastening Double‑sided chipbreaker Designed for turning (external and internal) Recommended for medium steel machining FAQ What materials is this insert intended for? The CNMG090408 T9215 Tungaloy indexable insert is primarily intended for medium steel machining; the T9215 grade combines wear resistance and toughness for productive steel turning. How is the insert mounted and secured? Mounting follows ISO standards for CNMG inserts: the rhombic plate with a cylindrical hole is secured in a compatible insert seat with the appropriate clamp or screw to ensure correct positioning and repeatability. Can this insert handle interrupted cuts? Yes, the CVD‑coated carbide substrate and the T9215 grade provide fracture resistance suited to continuous and lightly interrupted cutting conditions in steel turning. How many cutting edges are available per insert? The plate is double‑sided with a chipbreaker on both faces, allowing two indexed cutting edges per face depending on the seat and orientation, which increases usable edge count versus single‑sided designs. Is this insert compatible with standard CNMG holders? Compatibility with holders depends on form, clearance angle, tolerance class, fastening and size; the CNMG090408 form is an ISO standard and fits holders designed for CNMG inserts when dimensions and tolerances match. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090408 T9215 Wendeplatten - Tungaloy
The combination of a CVD-coated T9215 grade and a rhombic CNMG090408 geometry delivers reliable wear resistance and stable cutting performance for medium-steel turning; the 0.8 mm corner radius aids surface quality while the cylindrical hole ensures secure clamping. Order directly via Metav Werkzeuge or contact our consultants for application support. CNMG090408 T9215 CNMG turning insert, CVD-coated carbide – Tungaloy A CNMG090408 T9215 ISO rhombic turning insert designed for external and internal turning in medium-steel applications, offering high wear resistance and consistent chip control. CVD-coated carbide grade T9215 Optimised for medium steel turning Rhombic CNMG 09 geometry Double-sided chipbreaker design Cylindrical hole for secure clamping Consistent productivity through a wear-resistant grade The CVD-coated T9215 grade combines a wear-resistant coating with a robust carbide substrate to extend tool life in continuous and slightly interrupted cuts. This results in fewer indexings and longer intervals between insert changes, which supports a smoother production flow and predictable process windows. The proven balance of wear resistance and fracture toughness enables more aggressive feeds or extended cycles without sacrificing component quality. Precision and surface finish from the CNMG geometry The rhombic CNMG geometry with an 80° angle and a 0.8 mm corner radius promotes stable contact conditions and reduced cutting forces during external and internal turning. This geometry is particularly effective when a reliable workpiece surface is required after roughing or semi-finishing passes. The modest corner radius helps to maintain dimensional accuracy while the insert form contributes to improved tool life and repeatable surface quality in series production. Efficient chip control and secure clamping for process stability Equipped with a double-sided chipbreaker, the insert supports controlled chip formation across a range of cutting data, reducing interruptions and the risk of built-up edge. The insert’s cylindrical hole and ISO-compliant dimensions ensure positive clamping in compatible holders, increasing assembly reliability and minimising runout. Together, these features reduce downtime and contribute to higher effective machine utilisation. Integration guidance for easy adoption in turning cells As an ISO-standardised insert, the part integrates into common tool systems where holder form, clearance angle, tolerance class, fastening and thickness match the insert specification. Selection of the correct chipbreaker and grade for the workpiece material and machining stability is essential; the CVD-coated grade here is the first choice for medium steel machining and supports productive cutting strategies. If process optimisation is needed, choosing appropriate holder rigidity and cutting data will unlock the full benefit of the insert’s design. For availability, technical clarification and fast supply of Tungaloy CNMG090408 T9215 inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for expert advice and ordering assistance Technical data Article number: 6772174 Manufacturer SKU: TUN6772174 SKU: 6772174-Tungaloy Model series: ISO turning inserts Material: Carbide Grade/coating: T9215 CVD-coated Facts Insert designation: CNMG090408 Size: 09 Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Wedge/angle: 80° Hole: with hole (cylindrical) Special features Rhombic plate shape (CNMG) Double-sided chipbreaker Cylindrical hole for secure clamping ISO-standard insert for external and internal turning Recommended application: Turning, medium steel FAQ What materials is this insert best suited for? The Tungaloy CNMG090408 T9215 insert is optimised for medium steel machining; the CVD-coated T9215 grade provides high wear resistance combined with good fracture toughness for continuous to lightly interrupted cuts. How does the chipbreaker affect productivity? The double-sided chipbreaker on this CNMG insert promotes controlled chip formation and evacuation, which reduces process interruptions and supports longer uninterrupted production runs when matched with correct cutting data. Can this insert be used in standard ISO holders? Yes, the CNMG090408 follows ISO dimensions for rhombic inserts; compatibility depends on matching holder form, clearance angle, tolerance and fastening—secure clamping is achieved via the cylindrical hole. What surface quality can be expected with a 0.8 mm corner radius? A 0.8 mm corner radius offers a balance between tool strength and surface finish, giving improved dimensional stability and a finer surface compared with larger radii while maintaining robust performance in production. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090408 T9215 Wendeplatten - Tungaloy
Benefit from the proven combination of CVD-coated cemented carbide durability and the T9215 grade’s balance of wear resistance and fracture toughness to maintain productivity in medium-steel turning; order directly via Metav Werkzeuge or consult our specialists for tailored recommendations. CNMG 090408 T9215 turning insert — CVD-coated carbide, 80° geometry, Tungaloy The CNMG090408 T9215 Tungaloy turning insert is an ISO-standard rhombic indexable insert engineered for medium-steel turning, offering a robust balance of wear resistance and breakage safety in continuous to slightly interrupted cuts. CVD-coated cemented carbide T9215 Suitable for medium steel turning Rhombic CNMG 80° geometry Double-sided chipbreaker, cylindrical hole High productivity from a balanced grade and coating The combination of T9215 and a CVD-coated cemented carbide substrate delivers a controlled wear pattern and good fracture resistance, which together support longer tool life and consistent part quality. This grade is specified for medium steel machining and is designed to remain stable under continuous and slightly interrupted cutting. For production environments seeking predictable lifetime and repeatable results, the choice of a robust, coated grade reduces unplanned tool changes and helps sustain throughput without compromising surface integrity. Geometry that improves stability and surface finish The CNMG rhombic geometry with an 80° included angle and a 0.8 mm nose radius provides a compromise between strength and finish: a larger effective cutting edge area for heavy engagement while still producing acceptable surface quality. The insert’s 0° relief angle, 4.76 mm thickness and double-sided chipbreaker contribute to secure clamping and repeatable orientation when indexed. A cylindrical hole ensures reliable fastening in compatible holders. Together, these geometry features translate into stable cutting behaviour and consistent component dimensional accuracy. Simple system integration and predictable operation As part of the ISO turning insert family, this component fits into established tool systems: appropriate external holders or boring bars, a support shim or clamping kit, plus replacement screws complete the assembly. The insert’s specification—size 09, ISO code 090408, and the choice of chipbreaker—allows selection that matches workpiece material, machining strategy and machine rigidity. Choosing the correct chipbreaker and holder pairing yields improved chip control and reduced vibration, which directly reduces cycle time and scrap rates in series production. For high-productivity medium-steel turning with Tungaloy’s T9215 grade, contact Metav Werkzeuge for application advice and rapid availability — info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: 6772154 SKU: 6772154-Tungaloy Manufacturer SKU: TUN6772154 Model series: ISO-Drehwendeschneidplatten Designation: CNMG090408 Grade: T9215 Material: carbide Facts Nose radius: 0.8 mm Plate thickness: 4.76 mm Plate size: 09 ISO code: 090408 Included angle: 80° Relief angle: 0° Special features CVD-coated cemented carbide Double-sided chipbreaker Rhombic CNMG geometry Cylindrical hole for secure fastening Application: turning (external and internal) Compatible with ISO toolholders and boring bars Suitable for medium steel, continuous to slightly interrupted cuts System components: ISO insert, external holder/boring bar, shim/clamping set, replacement screws FAQ What materials is this insert best suited to machine? The CNMG090408 T9215 insert is optimised for medium steel applications; the T9215 grade combines wear resistance and fracture toughness for productive machining of steel workpieces. Is the insert indexable and double-sided? Yes — the CNMG geometry is indexable and the design includes a double-sided chipbreaker so each face can be reused, extending the effective service life of the insert (SKU 6772154-Tungaloy). What does the T9215 designation indicate? T9215 denotes a CVD-coated cemented carbide specification tuned for the middle range of steel machining, balancing abrasion resistance with mechanical strength for consistent performance. Which geometry characteristics improve machining performance? Key geometry features are the rhombic CNMG profile with an 80° included angle, 0.8 mm nose radius and 4.76 mm plate thickness; these deliver edge strength, stable engagement and good surface quality. Can the insert be used for interrupted cuts? The T9215 variant is intended for continuous to slightly interrupted cuts; for heavy interruptions a different grade or stronger geometry should be selected. What determines holder compatibility for this insert? Compatibility depends on holder form, relief angle, tolerance class, fastening method, size and plate thickness; matching these parameters ensures correct clamping and repeatable cutting performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090408 T9215 Wendeplatten - Tungaloy
High wear resistance and reliable fracture toughness are delivered by the CVD‑coated carbide T9215 together with an 0.8 mm corner radius and a 0° relief angle, providing consistent productivity for medium‑steel turning. Order the CNMG090408 T9215 insert directly via Metav Werkzeuge or contact our consultants for application guidance. CNMG 090408 T9215 ISO turning insert — CVD‑coated carbide by Tungaloy A CNMG090408 T9215 ISO‑format turning insert engineered for medium‑steel machining, optimised for continuous to lightly interrupted cuts. CVD‑coated carbide for high wear resistance 0.8 mm corner radius for consistent edge strength Double‑sided chipbreaker for multiple indexable edges ISO‑compliant rhombic insert with cylindrical hole Consistent productivity through wear‑resistant carbide The CVD‑coated carbide grade T9215 combines elevated wear resistance with maintained fracture toughness, making it a dependable choice for sustained turning operations in medium‑strength steels. The coating reduces flank and crater wear under continuous cutting conditions, which translates into longer tool life and fewer tool changes. This reliability supports higher machine utilisation and predictable process planning, directly contributing to lower cycle time variation and improved throughput. Geometry and chip control that reduce rework The rhombic plate form with an 80° included angle and the integrated double‑sided chipbreaker deliver stable chip formation and evacuation. The 0.8 mm corner radius is optimised to resist edge chipping while producing acceptable surface finish in typical finishing and semi‑finishing passes. The 0° relief angle provides a neutral clearance geometry that helps maintain dimensional accuracy on external and internal turning, reducing the need for secondary finishing and thus lowering rework rates. System compatibility that simplifies setup As an ISO‑standard insert, compatibility with holders is determined by form, relief, tolerance class, fastening, size and thickness; the insert thickness of 4.76 mm and the cylindrical hole allow secure clamping in a wide range of ISO holders and boring bars. The double‑sided construction increases indexable edge count per insert, improving cost efficiency per cutting edge. Selecting the matching holder and clamping set ensures repeatable seating and stable cutting conditions, which is essential for consistent part quality in series production. Application guidance for effective use Designed primarily for turning, the grade is recommended for medium steel where a balance of tool life and toughness is required; it performs best in continuous to lightly interrupted cuts. For interrupted or heavy roughing, consider adapting feed and depth of cut or selecting a different grade optimised for higher impact resistance. The insert is supplied in the ISO‑turning system and is compatible with the usual replacement screws and clamping sets; correct torque and clean seating surfaces ensure the maximum life from each indexable edge. Speak to Metav Werkzeuge about matching the CNMG090408 T9215 to specific machining tasks — technical advice, tooling combinations and rapid dispatch are available via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 6772162 Manufacturer item number: TUN6772162 SKU: 6772162-Tungaloy Model series: ISO turning inserts Material: CVD‑coated carbide (grade T9215) Facts ISO designation: 090408 Plate size: 09 Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 0° Included angle: 80° Special features Rhombic plate form Cylindrical hole (with hole) Double‑sided chipbreaker Intended use: turning Typical application: medium‑steel machining, continuous to light interrupted cuts FAQ What materials is this insert suitable for? The CNMG090408 T9215 insert is formulated for medium steel machining, delivering an effective balance between wear resistance and toughness for continuous to slightly interrupted turning. How does the double‑sided chipbreaker affect tool economy? The double‑sided chipbreaker on the Tungaloy insert provides multiple indexable edges, increasing the usable life per insert and improving cost per cutting edge. Which holder features are required for correct compatibility? Compatibility depends on holder form, relief, tolerance class, fastening, size and thickness; secure seating with the correct clamping set and replacement screw is essential for the CNMG090408 T9215 to perform reliably. Is this insert suitable for interrupted cuts? The T9215 grade is optimised for continuous to lightly interrupted cutting; for frequent heavy interruptions, a tougher grade should be considered. What are the benefits of the CVD coating on this insert? The CVD coating on the CNMG090408 T9215 enhances wear resistance and assists in maintaining edge stability, which supports longer tool life and more stable machining results. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090408 T9215 Wendeplatten - Tungaloy
Take advantage of the proven combination of CVD-coated carbide T9215 for high wear resistance and fracture toughness, plus ISO‑compatible geometry for simple holder matching; the result is stable, productive turning in medium Stahl applications. Order the CNMG090408 insert via Metav Werkzeuge or consult our specialists for selection advice. CNMG090408 T9215 ISO turning insert — Tungaloy, for turning applications CNMG090408 T9215 is an ISO‑standard rhombic insert designed for external and internal turning, optimised for medium Stahl machining with a double‑sided chipbreaker and cylindrical hole. CVD-coated carbide T9215 for medium Stahl machining 80° rhombic shape for stable external turning Double-sided chipbreaker for versatile cutting ISO-compatible insert with cylindrical hole Deliver predictable productivity in medium Stahl machining The T9215 grade is a CVD-coated carbide designed to balance wear resistance and fracture toughness, making it a reliable choice for sustained production. For continuous to slightly interrupted cutting, this grade delivers fewer tool changes and consistent component quality, which translates into measurable cycle‑time reductions on turning centres. The rhombic 80° geometry provides a robust cutting edge and stable engagement, so feeds and depths of cut can be selected to favour productivity without sacrificing finish. These engineering decisions support cost‑effective machining while maintaining repeatable results. Ensure fast integration into existing ISO tool systems The ISO‑compliant format simplifies toolroom logistics: the CNMG090408 insert fits holders that match the form, relief angle, tolerance class, fastening method, size and thickness specified for ISO turning plates. The insert’s cylindrical hole and standard thickness (4.76 mm) enable secure clamping and straightforward indexing. For workshops managing several tool types, this reduces setup time and minimises the need for special holders, improving throughput and tool utilisation across mixed production runs. Reduce downtime through durable geometry and chip control A double‑sided chipbreaker provides dependable chip formation across a range of feeds and cutting conditions, improving surface integrity and machine uptime. The 0.8 mm corner radius offers a compromise between edge strength and surface finish, supporting robust performance on medium Stahl components. The insert’s construction and coating promote stable wear progression, lowering the frequency of re‑indexing or replacement and contributing to predictable costs per part. Together, these factors enhance process security and support consistent output quality in demanding turning operations. For tailored advice on integrating the CNMG090408 T9215 insert from Tungaloy into production lines, contact Metav Werkzeuge — info@metav-werkzeuge.com or call +49 2822 7131930 for prompt consultation and ordering assistance. Technical data Article number: 6772186 SKU (manufacturer): TUN6772186 Manufacturer article number: 6772186 Data Insert designation: CNMG090408 Grade/sort: T9215 Material: carbide (Hartmetall) Coating: CVD-coated Geometry: rhombic, 80° Corner radius: 0.8 mm Relief/clearance angle: 0° Thickness: 4.76 mm Hole: with cylindrical hole Chipbreaker: double-sided Special features ISO turning insert series Suitable for external and internal turning Optimised for medium Stahl machining Balanced wear resistance and fracture toughness Compatible with standard ISO holders and clamping sets Product type: indexable turning insert, rhombic form FAQ What materials is this insert best suited for? The CNMG090408 T9215 insert from Tungaloy is optimised for medium Stahl machining, offering a combination of wear resistance and toughness for continuous to slightly interrupted cuts. Which insert geometry and mounting features does it have? This ISO‑format rhombic insert features an 80° lead angle, a 0.8 mm corner radius, 4.76 mm thickness and a cylindrical hole for secure clamping in compatible holders. Is the insert reversible or single‑use per face? The double‑sided chipbreaker allows re‑indexing to use the opposite face, enabling further cutting life before replacement; the design supports efficient edge changes in production environments. How does the T9215 grade affect machining performance? The T9215 CVD‑coated carbide grade combines high wear resistance with fracture toughness, reducing unexpected edge failure and supporting higher productivity on medium Stahl parts. What system components are recommended for secure use? Use ISO‑matched external holders or boring bars with appropriate clamping packs and replacement screws; matching holder form and tolerance class ensures repeatable seating and stable cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090408 T9215 Wendeplatten - Tungaloy
Take advantage of high wear resistance, reliable toughness and precise geometry for consistent, productive turning operations; order the insert directly via Metav Werkzeuge or ask the consultants for application support. CNMG090408 T9215 turning insert (ISO) by Tungaloy — CVD-coated carbide, 0° clearance The CNMG090408 T9215 is an ISO-standard turning insert designed for external and internal turning, offering a double-sided chipbreaker and a rhombic form for versatile machining. ISO-standard rhombic insert CVD-coated cemented carbide grade T9215 0° clearance for predictable cutting Double-sided chipbreaker for stable chips Maximise productivity with a wear-resistant turning grade The T9215 grade combines CVD-coated cemented carbide with a balance of wear resistance and toughness, making it particularly effective for medium steel machining. This material pairing reduces flank wear under sustained cutting and preserves the cutting edge during light interruptions, which translates into longer intervals between indexing and fewer tool changes. Selecting this grade supports higher material removal rates and steady cycle times, benefitting throughput without compromising component quality. Precise geometry for repeatable clamping and dimensional control With a rhombic (CNMG) shape, an 80° included angle and a 0° clearance, the insert delivers predictable engagement and straightforward seat alignment in compatible holders. The 0.8 mm corner radius and 4.76 mm thickness provide rigidity and support for edge strength, while the cylindrical hole and standard ISO form ensure repeatable clamping. Compatibility depends on holder form, clearance angle, tolerance class, fastening and plate size—matching these parameters guarantees accurate seating and repeatable part tolerances during series production. Stable chip control and easier process planning The double-sided chipbreaker optimises chip formation across a range of feeds and depths, improving evacuation and reducing re-cutting of chips. The two-sided design also offers economical indexing, effectively doubling edge life per insert. For continuous to light interrupted cuts the geometry and grade combination enhances process security and surface finish, reducing the need for corrective passes. For tailored performance, choose chipbreaker style and grade according to workpiece material and machining stability to achieve consistent results and lower unit costs. For application advice or to procure Tungaloy's CNMG090408 T9215 insert through Metav Werkzeuge, contact our sales team for a targeted recommendation based on the intended material and machining conditions. Technical data Article number: 6966083 Manufacturer SKU: TUN6966083 Manufacturer: Tungaloy Model series: ISO-turning inserts Shape: Rhombic (CNMG) Grade: T9215 Material: Cemented carbide (CVD-coated) Core specifications Insert designation: CNMG090408 Size: 09 Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Included angle: 80° Hole: with cylindrical hole Special features ISO-standardised turning insert Double-sided chipbreaker Suitable for external and internal turning Best for medium steel; continuous to light interrupted cuts Compatibility determined by holder form, clearance, tolerance, fastening, size and thickness FAQ What materials is this insert best suited for? This insert, CNMG090408 T9215 by Tungaloy, is optimised for medium steel machining and performs well in continuous to light interrupted cutting conditions. How does the T9215 grade improve tool life? The T9215 CVD-coated cemented carbide combines wear resistance with toughness to delay flank wear and resist edge chipping, extending the effective life of the CNMG090408 insert. Is the insert compatible with standard CNMG holders? Compatibility requires matching the holder's form, clearance angle, tolerance class, fastening method, plate size and thickness; the CNMG090408 follows ISO dimensions for straightforward matching. What advantages does the double-sided chipbreaker provide? The double-sided chipbreaker offers stable chip control across feeds and depths and allows economical indexing, effectively increasing usable cutting edges per insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090408 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated cemented carbide (T9215), a double-sided chipbreaker and a robust 0.8 mm corner radius for reliable, high-productivity turning. Order the CNMG090408 T9215 Tungaloy insert directly via Metav Werkzeuge or consult our advisors for specification matching. CNMG 090408 T9215 turning insert for ISO turning — Tungaloy CNMG090408 T9215 Tungaloy-Wendeplatte is an ISO-standard indexable insert designed for turning applications in medium steel environments, offering a balance of wear resistance and fracture toughness. CVD-coated cemented carbide T9215 For medium steel machining Double-sided chipbreaker for stability Rhombic CNMG 09 form, 80° lead angle Consistent tool life through engineered cutting material The T9215 grade is a CVD-coated cemented carbide developed to combine high wear resistance with excellent fracture toughness. For medium steel machining, this results in longer intervals between tool changes and more predictable component quality. The coating reduces flank wear at typical cutting speeds, while the substrate tolerates the mechanical loads of continuous to slightly interrupted cuts, improving overall productivity and process stability. Geometry that improves stability and surface finish The rhombic CNMG090408 geometry with an 80° lead angle and a 0.8 mm corner radius is optimised for robust cutting and consistent surface integrity. The double-sided chipbreaker controls chip formation to prevent entanglement and assists coolant penetration, which helps maintain low cutting forces and a steady surface finish. The 0° clearance ensures reliable seating in compatible toolholders and supports repeatable positioning for serial production. ISO compatibility and secure clamping As an ISO-standard indexable insert, compatibility with a holder depends on matching form, clearance angle, tolerance class, fastening method, size and plate thickness. The plate is supplied with a cylindrical hole, enabling positive clamping in many ISO holders and shanks. A system comprising the insert, a matched external holder or boring bar, a shim or clamp and the correct fixing screw ensures a secure assembly and consistent cutting geometry across tool changes. Operational advantages for production environments In serial and job-shop settings the insert delivers a pragmatic mix of economy and performance: longer tool life from the T9215 compound, stable machining from the plate geometry and reduced downtime from its indexable, double-sided design. These characteristics support higher machine utilisation and predictable process outcomes, giving a straightforward route to improved throughput and repeatable quality in turning operations. Contact Metav Werkzeuge for application-specific advice and rapid supply of genuine Tungaloy turning inserts; eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Article number: 6797188 SKU: 6797188-Tungaloy Manufacturer SKU: TUN6797188 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Corner radius: 0.8 mm Plate thickness: 4.76 mm Size: 09 Lead angle: 80° Clearance angle: 0° ISO designation: 090408 Special features CVD-coated cemented carbide, grade T9215 Double-sided chipbreaker Rhombic plate form, hole – cylindrical ISO-standard cutting insert for turning Suitable for continuous to lightly interrupted cuts For medium steel machining FAQ What materials is this insert best suited for? The CNMG090408 T9215 Tungaloy insert is optimised for medium steel machining and performs well in continuous to slightly interrupted turning operations. How is the insert mounted in a toolholder? The plate is supplied with a cylindrical hole and must be clamped in an ISO-compatible holder; compatibility depends on matching form, clearance, tolerance class, fastening method, size and thickness. What advantages does the T9215 grade provide? T9215 is a CVD-coated cemented carbide offering a balance of wear resistance and fracture toughness, which supports higher productivity and more consistent tool life in medium steel turning. Is the insert indexable on both sides? Yes — the insert features a double-sided chipbreaker, allowing it to be indexed and reused on the reverse face for extended service life. Which insert designation should be specified when ordering? Specify the ISO designation and grade: CNMG090408 T9215 (Tungaloy) or use the article number 6797188 for exact identification. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090408 T9225 Wendeplatten - Tungaloy
Combining CVD‑coated carbide T9225, ISO rhombic CNMG geometry and a double‑sided chipbreaker, this insert offers robust performance for medium to heavy steel turning while tolerating light interruptions; order the CNMG090408 T9225 Tungaloy insert directly via Metav Werkzeuge or consult our specialists for application advice. CNMG 090408 T9225 turning insert by Tungaloy A CNMG090408 T9225 Tungaloy insert designed for ISO‑standard external and internal turning, offering high edge strength and reliable chip control for medium to heavy steel machining CVD-coated carbide grade T9225 Robust universal grade for medium to heavy steel ISO rhombic insert CNMG 09, 80° cutting angle Double-sided chipbreaker with cylindrical hole Reliable performance for medium to heavy steel turning The insert uses a CVD‑coated carbide grade T9225, developed as a robust universal grade for medium to heavy steel machining. The CVD coating enhances wear resistance and thermal stability, which reduces flank wear during sustained cuts and extended cycle times. As a result, process reliability increases and tool-change frequency falls, supporting steadier production flow. The 0° clearance geometry also contributes to predictable contact conditions when paired with compatible toolholders, making the system less sensitive to minor set‑up variations. Geometry and chip control that protect the edge and surface finish The ISO rhombic CNMG geometry with an 80° cutting angle and a 0.8 mm corner radius provides a balanced compromise between edge strength and surface quality. The double‑sided chipbreaker is configured to break and evacuate chips efficiently across a range of feeds, improving surface finish and reducing built‑up edge in interrupted cuts. The insert’s cylindrical hole and 4.76 mm plate thickness offer secure clamping and stable support in suitable holders, which translates into repeatable accuracy and reduced vibration for improved part consistency. Compatibility, system insight and application guidance This insert is part of an ISO‑based system: selector decisions depend on form, clearance, tolerance class, fixing method, size and thickness. The component integrates with matching external holders or boring bars, plus the appropriate backing and clamp sets. For turning tasks where stability varies, selecting the T9225 grade and the double‑sided chipbreaker helps manage changing engagement conditions and minor interruptions, thereby extending productive cutting life. For complex or critical operations, pairing the insert with a rigid holder and optimised cutting data yields the best combination of productivity and tool life. For sample availability and application consulting for the Tungaloy CNMG090408 T9225 turning insert, contact Metav Werkzeuge to discuss suitability, delivery options and cutting data at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6944528 SKU: 6944528-Tungaloy Manufacturer SKU: TUN6944528 Model series: ISO-Drehwendeschneidplatten Facts Thickness: 4.76 mm Corner radius: 0.8 mm Cutting angle: 80° Clearance angle: 0° Insert size: 09 Special features Material: Carbide Coating: CVD Grade: T9225 Plate form: Rhombic Hole: with cylindrical hole Chipbreaker: double-sided Application: Turning Compatibility: ISO toolholders (form, clearance, tolerance, fixing, size, thickness) FAQ What materials is this insert suitable for? The CNMG090408 T9225 insert is intended primarily for medium to heavy steel machining; the T9225 grade provides toughness for mixed engagement conditions. How many cutting edges does the insert offer before disposal? The CNMG geometry is double‑sided with reversible edges; each side provides fresh cutting edges when indexed correctly. Which holder types are compatible with this insert? Compatibility depends on ISO holder form, clearance angle, tolerance class, fixing method, size and thickness; use ISO rhombic CNMG‑compatible external holders or boring bars. What benefits does the CVD coating provide compared with uncoated grades? The CVD coating on the T9225 grade increases wear resistance and thermal stability, leading to longer edge life and more consistent surface finish during continuous cutting. Is this insert suitable for interrupted cuts? Yes, the robust universal grade T9225 and the insert geometry tolerate light interruptions and variable engagement, improving process reliability in such conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090408 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide grade designed for toughness, a robust 0.8 mm corner radius, and ISO conformity for straightforward holder integration — ideal for stable medium-to-heavy steel turning; order directly via Metav Werkzeuge or request tailored holder recommendations from the consultants. CNMG 090408 T9225 ISO turning insert — CVD-coated carbide, 0.8 mm corner radius, 80° rhombic A CNMG090408 T9225 indexable insert for turning, intended for medium to heavy steel machining with an ISO rhombic geometry and an 80° included angle. CVD-coated carbide grade T9225 ISO CNMG 090408 rhombic insert 80° 0.8 mm corner radius for robust strength Double-sided chipbreaker with cylindrical hole Consistent cutting performance in mixed conditions The CVD-coated carbide composition offers a balance of hardness and toughness that supports reliable cutting under variable engagement. The CVD-coated surface provides improved wear resistance while the base carbide maintains cutting-edge stability; together they enable extended tool life during interrupted cuts and fluctuating feed conditions. This combination addresses the common industrial need for a versatile grade: the T9225 formulation is particularly suited to sustained removal rates without sacrificing surface quality. Technical terms: CVD (chemical vapour deposition) is a thin, hard coating applied to increase abrasion resistance, while carbide denotes a cemented tungsten-carbide substrate that supplies fracture resistance. Direct compatibility with ISO toolholders for fast setup Designed according to ISO dimensions, compatibility is governed by insert form, relief angle, tolerance class, fastening and the plate’s size and thickness. The ISO conformity guarantees interchangeability with standard holders when the 80° rhombic form and the 0° relief are matched correctly. The plate thickness of 4.76 mm and the cylindrical hole permit secure fastening and simple indexing on appropriate clamping sets. For production environments this reduces setup time and minimises the need for special tooling adaptations, supporting a smoother workflow and predictable process parameters. Geometry engineered for stability and chip control The rhombic 80° geometry combined with a 0.8 mm corner radius delivers a compromise between edge strength and accessible cutting radius for general turning tasks. The double-sided chipbreaker enhances chip formation and evacuation, improving surface finish and reducing the risk of built-up edge under typical steel cutting conditions. The cylindrical hole design supports reliable seating and ease of rotation when indexing the insert, making the tool economical to run while maintaining consistent part quality. Together these features reduce downtime and promote repeatable results in series production. Practical guidance for selecting and using the insert For efficient machining, pair this insert with a matching holder suited to the intended depth of cut and feed rate; choose a holder that aligns with the plate’s form and 0° clearance specification for optimal contact and rigidity. The grade excels in turning of steels where toughness is needed to withstand variable engagement; selecting appropriate cutting parameters and coolant strategy will prolong service life and improve productivity. Where intermittent cuts or slight feed variations occur, the increased toughness of the grade helps avoid premature chipping, thus delivering a favourable cost-per-part balance for industrial turning operations. Contact Metav Werkzeuge for availability, matching holder recommendations and application support for the Tungaloy CNMG090408 T9225 turning insert — phone +49 2822 7131930 or e-mail info@metav-werkzeuge.com Technical Data Article number: 6780640 Manufacturer SKU: TUN6780640 Merchant SKU: 6780640-Tungaloy Manufacturer: Tungaloy Model series: ISO turning indexable inserts Application: Turning Facts ISO designation: 090408 Size: 09 Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 0° Included angle: 80° Hole: with cylindrical hole Special features CVD-coated carbide Grade T9225 Double-sided chipbreaker Rhombic 80° insert shape Compatibility with ISO holders (form, relief angle, tolerance class) Suitable for medium to heavy steel turning FAQ What materials is this insert intended for? The CNMG090408 T9225 insert is formulated for medium to heavy steel turning applications and performs well where toughness is required. How does the T9225 grade influence machining? The T9225 grade combines toughness and wear resistance via a CVD coating on a carbide substrate, improving resistance to edge chipping in variable engagement conditions. Can the insert be indexed to use both sides? Yes, the insert is double-sided with a cylindrical hole and a chipbreaker on both faces, enabling economical indexing for extended use. What holder features are required for correct mounting? Mounting requires an ISO-compatible holder that matches the rhombic form, 80° included angle, plate thickness and 0° relief to ensure secure clamping and correct geometry. Is this insert suitable for interrupted cuts? The robust grade and 0.8 mm corner radius provide additional resistance to edge breakage, making the insert suitable for applications with light interruptions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090408 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of robust cutting performance, broad material coverage and ISO compatibility to keep turning operations productive and predictable; order the CNMG090408 T9225 insert directly via Metav Werkzeuge or consult the technical team for tailored recommendations. CNMG090408 T9225 ISO turning insert for medium-to-heavy steel machining by Tungaloy The CNMG090408 T9225 is an ISO-compliant, rhombic indexable insert designed for external and internal turning, offering a robust universal grade for medium-to-heavy steel applications. CVD-coated cemented carbide grade T9225 ISO-compliant rhombic insert 09 Double-sided chipbreaker design 0° clearance, cylindrical hole Consistent cutting in medium-to-heavy steel with a tough CVD coating The insert combines a CVD-coated surface with cemented carbide substrate to deliver wear resistance alongside toughness. The T9225 grade is formulated as a robust universal option for medium-to-heavy steel machining where variable engagement or slightly interrupted cuts require increased toughness. This results in stable chip formation and a more predictable tool life under changing conditions, supporting reliable cycle times and reduced process variation. Easy integration into ISO tool systems and secure clamping for stable results As an ISO-design insert, compatibility is governed by form, clearance angle, tolerance class, fastening, size and thickness; this enables straightforward interchange in standard holders. The rhombic 09 geometry with an 80° included angle offers versatility for both roughing and finishing passes, while the 0° clearance and cylindrical hole ensure secure clamping. The plate thickness of 4.76 mm and a corner radius of 0.8 mm provide mechanical stability that reduces vibration and supports consistent surface quality when paired with the correct holder and clamp set. Productivity gains through the right chipbreaker and predictable wear behaviour The double-sided chipbreaker affords two usable edges per side, improving cost-efficiency and uptime. Choosing the T9225 grade and an appropriate chipbreaker tailored to material and stability leads to longer productive edge life and fewer tool changes. The CVD layer enhances high-temperature wear resistance, allowing for competitive cutting speeds and longer intervals between indexings. For production-focused workshops, this combination translates into reduced downtime, lower tool consumption and steadier output quality. Contact Metav Werkzeuge for application-specific machining advice on the Tungaloy CNMG090408 T9225 insert or to request further technical information via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6966085-Tungaloy Manufacturer SKU: TUN6966085 Manufacturer article number: 6966085 Material: cemented carbide Grade: T9225 Facts ISO designation: CNMG090408 Insert size: 09 Plate thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 0° Shape: rhombic 80° Hole: with cylindrical hole Special features Coating: CVD Chipbreaker: double-sided Application: turning (external and internal) Typical system: ISO insert, outer holder or boring bar, backing plate, clamp set and replacement screws FAQ Which materials is this insert best suited to machine? The CNMG090408 T9225 insert is intended primarily for medium-to-heavy steel machining; its CVD-coated cemented carbide composition provides a balance of wear resistance and toughness for variable cutting conditions. Can the insert be used for interrupted cuts? Yes, the T9225 grade is designed to tolerate slightly interrupted cuts and changing engagement thanks to its tougher substrate and coating combination. How should the insert be mounted in a tool system? Mounting requires an ISO-compatible rhombic holder matched to the insert form, thickness and tolerance; the cylindrical hole and 0° clearance enable secure clamping with the correct backing plate and clamp set. What advantage does the double-sided chipbreaker provide? The double-sided chipbreaker offers multiple effective cutting edges per insert, improving economy by extending usable edge life and enabling cost-efficient indexings. Is this insert suitable for both roughing and finishing operations? The rhombic 09 geometry and 0.8 mm corner radius provide versatility, making the insert suitable for a range of turning tasks from robust roughing to semi-finishing when parameters are optimised. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090408 T9225 Wendeplatten - Tungaloy
The CNMG090408 T9225 insert delivers a combination of CVD‑coated carbide durability and an 80° rhombic form with a 0.8 mm corner radius for stable medium‑to‑heavy steel turning; benefit from consistent tool life and reliable chip control. Order the CNMG090408 T9225 Tungaloy insert directly via Metav Werkzeuge or consult our advisors for application support. CNMG090408 T9225 Tungaloy indexable insert — CVD‑coated carbide, 80° rhombic The CNMG090408 T9225 is an ISO‑format indexable insert for turning, intended for robust external and internal turning where variable cutting conditions require a tougher, versatile grade. CVD‑coated carbide grade T9225 80° rhombic CNMG form for stable turning Double‑sided chipbreaker for reliable chips 0.8 mm corner radius for strength and finish Process stability in changing conditions The CVD‑coated carbide composition of this insert and the tough T9225 grade are engineered for medium to heavy steel machining and applications with light interruptions or variable engagement. The coating increases thermal stability and wear resistance, so machining cycles stay predictable across batch runs. This results in fewer tool changes and more consistent part quality, making the insert a practical choice where uptime and repeatable performance are priorities. Predictable chip formation and improved surface quality The combination of the double‑sided chipbreaker and the 80° rhombic geometry supports controlled chip evacuation and stable cutting forces. The 0.8 mm corner radius balances edge strength and surface finish, reducing vibration risk during heavier cuts while still allowing acceptable part appearance. For customers focused on efficient production, these features help to lower scrap rates and improve throughput on both external and internal turning operations. Seamless integration into ISO turning systems As an ISO‑format CNMG insert, compatibility with holders depends on form, relief angle, tolerance class, clamping method, size and thickness. The insert’s 4.76 mm plate thickness and rhombic shape are standard for many external holder and boring bar systems; the insert is supplied with a cylindrical hole for secure clamping. This standardised interface simplifies tool procurement and replacement in multi‑machine environments, aiding faster set‑ups and consistent tool behaviour across the shop floor. Practical selection and application advice for productivity Choose this insert when the process demands a robust, general‑purpose grade that tolerates slight interruptions or unstable cut entry. It is particularly suitable for stepped or roughing passes where a balance of toughness and wear resistance is required. For finishing passes, the same geometry can offer acceptable surface integrity when cutting parameters are adjusted. For tailored cutting data and optimisation, Metav Werkzeuge can advise on feed, speed and holder selection to maximise productivity while protecting tool life. For process‑stable turning with Tungaloy’s CVD‑coated T9225 grade, contact Metav Werkzeuge for application support and to order — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6780618 Manufacturer SKU: TUN6780618 Our SKU: 6780618-Tungaloy ISO designation: CNMG090408 Model series: ISO turning indexable inserts Core data Size: 09 Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 0° Included angle: 80° Special features Grade: T9225 (CVD‑coated carbide) Shape: rhombic, CNMG Chipbreaker: double‑sided Hole: with cylindrical hole Application: turning (external and internal) FAQ Which materials is this insert intended for? The CNMG090408 T9225 insert by Tungaloy is a robust universal grade designed primarily for medium to heavy steel machining and performs well when varying engagement or light interruptions require added toughness. Can this insert be used for internal turning and boring operations? Yes, the ISO CNMG format and rhombic geometry make the insert suitable for both external and internal turning; compatibility with a specific boring bar or holder must be checked by matching form, relief angle, tolerance and clamping method. What does the T9225 grade indicate? T9225 denotes a CVD‑coated carbide grade developed for a broad range of steel applications, combining thermal stability and toughness to deliver reliable tool life under mixed cutting conditions. What are the key dimensions of the CNMG090408 insert? The insert is ISO CNMG090408, size 09, with a plate thickness of 4.76 mm and a corner radius of 0.8 mm; it features an 80° included angle and a relief angle of 0°. How is chip control achieved with this insert? Chip control is managed by the double‑sided chipbreaker geometry and the rhombic form; together they promote predictable chip shapes and assist evacuation, which supports surface quality and tool life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com