CNMG 090412 T9215 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide grade T9215 and the robust rhombic geometry to combine wear resistance with dependable fracture toughness for high-productivity turning. Order the CNMG090412 T9215 insert via Metav Werkzeuge or consult our technical advisors for application-specific recommendations. CNMG090412 T9215 indexable turning insert, CVD-coated carbide, 80° by Tungaloy The CNMG090412 T9215 is an ISO-standard rhombic indexable insert designed for external and internal turning of medium steel, offering a balance of wear resistance and edge stability for productive machining. CVD-coated carbide for high wear resistance Optimised for medium steel productivity Rhombic 80° shape with 1.2 mm corner radius Double-sided chipbreaker with cylindrical hole High productivity and consistent edge life for medium steel The CNMG090412 T9215 insert combines a CVD-coated carbide substrate with a geometry optimised for medium-steel machining. The T9215 grade provides improved wear resistance and enhanced fracture toughness compared with uncoated grades, which allows longer cutting intervals and fewer tool changes under continuous to lightly interrupted cutting conditions. This results in steady cycle times and consistent component quality, supporting higher throughput in production environments. Predictable mounting and ISO compatibility to reduce setup time Manufactured to ISO dimensions, the insert gives predictable compatibility with matching external holders when the holder’s form, free angle, tolerance class, fastening method, size and thickness correspond. The 80° rhombic outline and 0° clearance offer robust engagement and straightforward indexation. Clear, standardised interfaces reduce the risk of mis-clamping and facilitate repeatable setups across batches, improving process stability and machining accuracy. Practical geometry and chip control for reliable shop performance The insert’s practical details—double-sided chipbreaker, cylindrical hole for secure fastening, 1.2 mm corner radius and 4.76 mm thickness—combine to give mechanical strength and surface-finish control. The double-sided chipbreaker supports effective chip formation for medium steels, while the rhombic shape allows flexible use in both external and internal turning. For workshops seeking dependable productivity, this configuration provides an effective compromise between material removal rate and tool life. Contact Metav Werkzeuge for original Tungaloy CNMG090412 T9215 inserts and tailored application advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6772175 Manufacturer SKU: TUN6772175 Brand: Tungaloy Model series: ISO turning indexable inserts Article name: CNMG090412 T9215 Tungaloy insert SKU: 6772175-Tungaloy Core specifications Size: 09 Thickness: 4.76 mm Corner radius: 1.2 mm Clearance: 0° Insert angle: 80° Hole: with cylindrical hole Shape: rhombic Special features Grade: T9215 (CVD-coated carbide) Application: Turning (external and internal) Chipbreaker: double-sided Compatibility determined by form, free angle, tolerance class, fastening, size and thickness Suitable for continuous to light interrupted cuts FAQ Which materials is this insert suitable for? The CNMG090412 T9215 insert from Tungaloy is optimised for medium steel applications, where the T9215 CVD-coated carbide grade delivers wear resistance and fracture toughness for productive turning. Can this insert handle interrupted cuts? Yes, the Tungaloy CNMG090412 T9215 is designed for continuous to light interrupted cuts; heavier interruptions may require a different geometry or grade. What determines compatibility with a toolholder? Compatibility depends on matching the insert form, free angle, tolerance class, fastening method, size and thickness to the holder; adhering to the ISO dimensions ensures predictable mounting. What are the key geometric specifications to note? Key specifications include a rhombic 80° shape, 1.2 mm corner radius, 4.76 mm thickness, a cylindrical hole for fastening and a double-sided chipbreaker for improved chip control. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090412 T9225 Wendeplatten - Tungaloy
Take advantage of the CVD‑coated carbide grade and the robust ISO geometry for consistent chip control and extended tool life; order the CNMG090412 T9225 insert directly via Metav Werkzeuge or consult our technical advisors for application-specific recommendations. CNMG 090412 T9225 turning insert by Tungaloy — CVD‑coated carbide, 80° geometry The CNMG090412 T9225 is a CVD‑coated carbide indexable insert designed for medium to heavy steel turning, offering a robust universal grade for variable engagement and lightly interrupted cuts. ISO‑standard rhombic insert 80° geometry CVD‑coated carbide T9225 for toughness Suitable for medium to heavy steel turning Double‑sided chipbreaker, economical two‑edge use Reliable cutting performance for variable turning conditions The CVD‑coated carbide composition of this grade delivers a balance between wear resistance and toughness, making it well suited to medium to heavy steel machining where cutting conditions may vary or where occasional interrupted cuts occur. The CVD layer enhances flank and crater wear resistance, which contributes to longer tool life and more stable process windows. Operators benefit from predictable tool behaviour and fewer unscheduled insert changes, which in turn supports higher machine utilisation and lower per‑component tooling cost. Geometry and corner radius that reduce rework and setup time An 80° geometry in a rhombic format provides a strong cutting edge and favourable strength for heavy radial engagement, while the 1.2 mm corner radius gives a compromise between edge robustness and surface finish. The zero-degree clearance (free angle 0°) and the standard ISO form ensure compatibility with common external holders when form, thickness and tolerance class match. Explaining the terms: the corner radius helps absorb cutting forces and reduces the risk of edge chipping; the 80° lead angle spreads cutting load, improving stability on less rigid setups. Practical system compatibility and economic edge use This insert is double‑sided with a central cylindrical hole for secure clamp mounting, enabling two usable edges per indexation and straightforward replacement in compatible holders. The ISO‑standard design and common thickness make stock management easier and reduce downtime during changeovers. In a workshop setting, the combination of a reliable chipbreaker form and the Tungaloy grade supports consistent chip control and surface quality, lowering the risk of workpiece rework and helping maintain production schedules. How it supports process reliability and operator confidence Selecting a robust universal grade such as T9225 simplifies grade choice across a range of steel alloys, offering broad applicability when material mix or cutting modes vary. The insert construction and chip control characteristics reduce the need for frequent parameter adjustments, which is beneficial for both experienced machinists and teams with variable operator skill levels. This stability translates into repeatable component quality and predictable tool life, strengthening process documentation and planning. Contact Metav Werkzeuge for precise application advice, availability and to order the CNMG 090412 T9225 insert; email info@metav-werkzeuge.com or call +49 2822 7131930 for specialist support and fast supply Technical data Article number: 6780659 Manufacturer SKU: TUN6780659 Product label: CNMG090412 T9225 Tungaloy insert Core measurements Corner radius: 1.2 mm Thickness: 4.76 mm Geometry angle: 80° Clearance (free angle): 0° Size designation: 09 Materials & features Material: carbide Coating/grade: T9225 (CVD‑coated) Plate shape: rhombic Hole style: cylindrical hole Chipbreaker: double‑sided Intended application: turning Model series: ISO turning indexable inserts FAQ Which materials is this insert suitable for? The CNMG090412 T9225 insert is intended primarily for medium to heavy steel turning and is formulated to handle changing engagement and lightly interrupted cuts. How many usable edges does the insert provide? Thanks to the double‑sided chipbreaker, the insert offers two usable cutting edges per indexation, improving cost efficiency. Is the insert compatible with standard ISO external holders? Compatibility depends on matching the insert form, thickness, tolerance class and clamping method; the CNMG090412 follows ISO geometry, which supports broad holder compatibility. What benefit does the 1.2 mm corner radius provide? A 1.2 mm radius increases edge strength for roughing and semi‑finishing while maintaining acceptable surface quality, reducing the risk of chipping under heavy cuts. Does the T9225 grade require different cutting data than other grades? T9225 is a universal, tough CVD grade designed for robustness; recommended feeds and speeds should be adjusted according to workpiece material, machine rigidity and holder stability for best results. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090412 T9225 Wendeplatten - Tungaloy
Combining the CVD-coated carbide T9225 with a 1.2 mm corner radius and a robust double-sided chipbreaker yields stable, repeatable results in medium-to-heavy steel turning; order the CNMG090412 T9225 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. CNMG 090412 T9225 ISO turning insert for turning — Tungaloy CNMG 090412 T9225 is an ISO‑standard indexable turning insert designed for medium to heavy steel machining with compatibility for standard ISO holders CVD-coated carbide grade T9225 For medium to heavy steel machining Rhombic CNMG shape with 80° lead angle Double-sided chipbreaker, cylindrical hole 1.2 mm corner radius for stable cutting Improved productivity through a robust cutting grade The CVD-coated T9225 grade combines abrasion resistance with enhanced toughness to cope with changing engagement conditions. As a carbide insert engineered for medium-to-heavy steel machining, it offers longer tool life compared with uncoated grades and reduces downtime for index changes. The hardened coating supports higher cutting speeds and steadier material removal, which translates into fewer interventions and more predictable cycle times on turning centres and lathes. The result is measurable process efficiency and lower part cost per component. Secure edge and reliable chip control for interrupted cuts A double-sided chipbreaker paired with a 1.2 mm corner radius stabilises the cutting edge and controls chip formation during heavy or slightly interrupted cuts. The rhombic CNMG form with an 80° lead angle provides a balance between radial strength and accessibility for shoulder and turning operations. This combination reduces vibration and protects the cutting edge against shock loads, helping to preserve surface finish and dimensional consistency when machining tougher steels or variable feeds. Straightforward integration and ISO compatibility The insert conforms to ISO geometry, with a 4.76 mm thickness, size 09 seating, and a cylindrical central hole for positive clamping. Compatibility to a holder is determined by form, relief angle, tolerance class, mounting and plate size — following ISO standards ensures interchangeability with common external holders and boring bars. The indexed, double‑sided design allows cost-efficient use of both edges, and the clear specification of relief angle (0°) and lead angle supports process planning and fixture selection on CNC lathes and turning centres. For uncertain applications, technical data from the supplier can be used to match holder geometry and cutting parameters. For reliable medium‑to‑heavy steel turning with Tungaloy grade T9225, contact Metav Werkzeuge for tailored advice and fast supply via info@metav-werkzeuge.com or phone +49 2822 7131930. Technical data Article number: 6966104 Manufacturer SKU: TUN6966104 Model series: ISO-Drehwendeschneidplatten Designation: CNMG090412 Material: Hartmetall Facts Corner radius: 1.2 mm Thickness: 4.76 mm Size: 09 Lead angle: 80° Relief angle: 0° Special features Grade/sort: T9225 (CVD-coated carbide) Shape: rhombic (CNMG) Chipbreaker: double-sided Hole: with cylindrical hole Application: Turning FAQ What materials is this insert intended for? The CNMG090412 T9225 insert is specified for medium‑to‑heavy steel machining and the T9225 grade is selected for robustness under changing engagement conditions. Is the insert compatible with standard ISO holders? Yes, the ISO geometry (CNMG 09 size, 4.76 mm thickness, cylindrical hole) ensures compatibility with holders and boring bars designed for ISO indexable inserts. How does the double-sided chipbreaker benefit production? The double-sided chipbreaker provides repeatable chip control and edge protection, reducing vibration and improving surface finish during interrupted or heavy cuts. Can both cutting edges be used? Yes, the indexable design allows rotation to a fresh cutting edge, which doubles the usable life per insert compared with a single‑edged alternative. What are the defining geometrical values to check for holder matching? Key values are the CNMG form, size 09, 4.76 mm thickness, 1.2 mm corner radius and the 80° lead angle; these determine fit and seating in the chosen holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090412 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide grade designed for robust, medium-to-heavy steel machining, the ISO-standard CNMG form for easy system integration, and a secure double-sided chipbreaker for predictable chip control; order the CNMG090412 T9225 directly via Metav Werkzeuge or request application advice from our consultants. CNMG 090412 T9225 — Indexable Turning Insert for Turning by Tungaloy CNMG090412 T9225 is an ISO-format indexable turning insert developed for reliable performance in medium-to-heavy steel turning operations. Robust CVD-coated carbide grade T9225 ISO CNMG090412, rhombic 80° geometry Double-sided chipbreaker for secure chip control 1.2 mm corner radius, 4.76 mm thickness Consistent performance under varying cutting conditions The CNMG090412 T9225 insert is a CVD-coated carbide solution engineered as a robust universal grade for turning operations where varying engagement and light interruptions occur. The coating and substrate combination provides a balance of hardness and toughness, which extends tool life under fluctuating loads and contributes to consistent surface finish and dimensional stability. As an ISO-standardised insert, the component supports predictable process parameters and repeatable results in industrial turning applications, helping to reduce setup time and increase throughput. Seamless integration into ISO tool systems Compatibility is determined by insert form, clearance angle (0°), tolerance class, fastening method and thickness; the CNMG geometry matches widely used external holders and boring bars. The rhombic 80° shape with a cylindrical mounting hole permits secure clamping and straightforward indexing. With a plate thickness of 4.76 mm and an insert size of 09, the format suits a broad range of standard external and internal turning holders. Clear identification via the ISO designation simplifies tool management and inventory control within machining centres and job shops. Practical benefits for productivity and process security The double-sided chipbreaker design offers improved chip control for steel cutting, reducing the risk of entanglement and supporting stable cutting forces during medium-to-heavy passes. The 1.2 mm corner radius balances edge strength and surface finish, making the insert suitable for roughing with acceptable finishing capability when process parameters are set accordingly. Selecting the T9225 grade supports efficient material removal rates and contributes to longer in-service intervals, lowering total tooling consumption and helping to keep production schedules on track. For application-specific advice, availability checks or to discuss batch requirements for the Tungaloy CNMG090412 T9225, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 to arrange technical guidance and delivery options Technical Data Article number: 6797191 Manufacturer SKU: TUN6797191 SKU: 6797191-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: carbide Facts Corner radius: 1.2 mm Thickness: 4.76 mm Insert size: 09 Lead/major angle: 80° Clearance angle: 0° Special features ISO designation: CNMG090412 Grade/coating: T9225, CVD-coated carbide Insert geometry: rhombic, 80° Mounting: with cylindrical hole Chip control: double-sided chipbreaker Typical application: turning FAQ What steel applications suit this insert best? The CNMG090412 T9225 insert is intended primarily for medium-to-heavy steel machining, offering robust performance where intermittent cuts or varying engagement require added toughness. Is the insert compatible with standard CNMG holders? Yes, the CNMG090412 format follows ISO specifications; compatibility depends on holder form, clamping style and the insert thickness of 4.76 mm. How does the chipbreaker affect machining? The double-sided chipbreaker on this indexable insert improves chip control during turning, reducing chip-related interruptions and promoting stable cutting conditions. Can this insert be indexed to use both sides? The insert is double-sided and designed to be indexed, effectively providing two cutting edges per side where geometry allows, helping to extend overall edge life. What key dimensions should be checked before ordering? Verify the ISO designation CNMG090412, the 1.2 mm corner radius, 4.76 mm thickness, the 80° geometry and the cylindrical mounting hole to ensure correct fit. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 090412 T9225 Wendeplatten - Tungaloy
Take advantage of a proven combination of CVD-coated carbide and a robust universal T9225 grade to increase process stability and reduce tool changes in medium to heavy steel turning; order the CNMG090412 T9225 Tungaloy insert via Metav Werkzeuge or consult our specialists for application advice. CNMG090412 T9225 turning insert — ISO rhombic insert for turning by Tungaloy CNMG090412 T9225 is an ISO-compliant rhombic turning insert designed for external and internal turning in steel, offering a robust grade and reliable chip control for variable cutting conditions Robust T9225 grade for medium to heavy steel CVD-coated carbide for improved wear resistance 80° rhombic geometry for versatile turning Double-sided chipbreaker for reliable chip control Increase throughput with a tougher, CVD-coated grade The T9225 grade combines a CVD-coated surface with a tough carbide substrate to deliver extended tool life under interrupted cuts and varying engagement. This combination enhances resistance to abrasive wear while preserving edge integrity, which translates directly into longer intervals between indexings and fewer tool changes. For production environments where component tolerances and cycle times matter, the carbide composition and coating reduce unplanned downtime and improve overall machining economy. Reliable mounting and versatile geometry for stable turning The ISO rhombic format with an 80° included angle and a cylindrical hole supports secure clamping and broad compatibility with common ISO holders. The geometry provides a balance between strength and accessibility in tight feature zones, while the 1.2 mm corner radius helps maintain edge robustness without compromising surface finish. Clear specification of form, clearance angle, tolerance class, size and thickness ensures correct holder selection and predictable performance across different turning set-ups. Consistent chip control and edge performance for cleaner processes Equipped with a double-sided chipbreaker, this insert improves chip formation and evacuation in medium to heavy steel cutting, minimising rework and the risk of tangling. The insert’s 4.76 mm thickness and engineered chipformer support stable cutting forces, which reduces chatter and improves surface quality. Explaining technical terms: the chipbreaker guides broken chips away from the cut, while the CVD coating adds a wear-resistant layer that performs well at elevated temperatures common in steel turning. Practical application guidance to reduce setup time Designed for turning operations, the insert performs well in both external and internal machining when paired with a suitable holder, shim or clamp set and replacement screws. Select the chipbreaker and grade according to workpiece material and machine stability: the universal T9225 grade is particularly suitable where varying engagement or intermittent cuts demand extra toughness. If uncertainty remains about the best chipbreaker or holder combination for a specific task, our application notes or technical team can provide targeted recommendations to streamline integration into existing tool systems. Contact Metav Werkzeuge to discuss how the CNMG090412 T9225 insert can improve process stability in steel turning and to arrange supply or technical consultation Technical details Article number: 6780633 SKU: 6780633-Tungaloy Manufacturer SKU: TUN6780633 Model series: ISO-Drehwendeschneidplatten Designation: CNMG090412 T9225 Tungaloy insert Key measurements Corner radius: 1.2 mm Included angle: 80° Plate thickness: 4.76 mm Size designation: 09 Materials & features Material: carbide Coating: CVD Grade: T9225 Geometry: rhombic, 80°, cylindrical hole Chipbreaker: double-sided Application: turning (external and internal) FAQ What workpiece materials is this insert suitable for? The CNMG090412 T9225 insert is optimised for medium to heavy steel machining; the T9225 grade provides toughness for variable engagement and interrupted cuts. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO plate dimensions and mounting standards; compatibility depends on matching form, clearance angle, tolerance class, size and thickness with the chosen holder. How many cutting edges are available on this insert? With a double-sided design, the insert offers multiple usable edges before replacement, increasing effective tool life per index. What advantages does the CVD coating provide? The CVD coating on the T9225 grade improves wear resistance at elevated cutting temperatures and helps maintain edge retention during sustained steel cutting. When should the double-sided chipbreaker be selected over other chipformers? Choose the double-sided chipbreaker for reliable chip control in turning operations where chip evacuation and repeatable breakage are priorities, especially in medium to heavy steel applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120402 AH6225 Wendeplatten - Tungaloy
Take advantage of a PVD-coated carbide grade (AH6225) that combines a sharp, stable cutting edge with broad compatibility for turning stainless steels; the insert’s rhombic form, 0° clearance angle and double-sided chipbreaker support consistent chip control and reliable surface finish in medium-duty operations. Order or request advice via Metav Werkzeuge for fast supply and application guidance. CNMG120402 AH6225 ISO turning insert for turning by Tungaloy The CNMG120402 AH6225 is an ISO-standard rhombic insert for general turning, optimised for machining stainless steels with a sharp yet robust cutting edge suitable for varying conditions. PVD-coated carbide grade AH6225 Rhombic insert, 80° lead angle Double-sided chipbreaker for chip control 0.2 mm corner radius for balanced finish Increase throughput with a stable, versatile cutting grade The AH6225 grade is a PVD-coated carbide developed for predictable performance when turning stainless steels. Its formulation supports a sharp cutting edge that resists wear under medium cutting conditions, which translates into longer effective tool life and fewer interruptions. Improved edge stability means more consistent surface quality and reduced risk of premature edge chipping, so process reliability and productivity rise without complex parameter fine-tuning. Fast integration thanks to standardised form and clear compatibility data Compatibility to a toolholder is determined by form, clearance angle, tolerance class, fastening, size and thickness. The rhombic plate with an 80° lead angle and 0° clearance angle fits common ISO holders when those parameters match; the plate sits on a matching pocket and secures via the cylindrical central hole. Clear specification of size (12 mm) and thickness (4.76 mm) makes selection straightforward, reducing setup time and avoiding costly mismatches in production. Geometry and chip control that balance surface finish and life A 0.2 mm corner radius provides a balance between edge strength and the ability to achieve a fine finish on the workpiece. The double-sided chipbreaker design helps form short, manageable chips during turning, lowering the risk of entanglement and improving thermal behaviour at the cutting zone. In practice, this means smoother operation on semi-finished components and less need for secondary finishing, while the PVD layer supports wear resistance under fluctuating cutting loads. Practical guidance for selection and use When choosing an insert for turning, match the insert geometry and chipbreaker to the workpiece material and machining stability: a sharper geometry suits light, controlled cuts and finishes, while a more robust profile helps with interrupted cuts or less rigid setups. The ISO-standard construction simplifies procurement and inventory management: the same insert family can serve several holders and applications provided the holder’s pocket and fastening match the insert’s form and dimensions. Contact Metav Werkzeuge for tailored recommendations and prompt supply of Tungaloy CNMG120402 AH6225 turning inserts; expert advice is available to match the insert to specific holders and machining tasks Technical data Article number: 6966061 Manufacturer SKU: TUN6966061 SKU: 6966061-Tungaloy Model series: ISO turning inserts Core data Insert designation: CNMG120402 Size: 12 mm Thickness: 4.76 mm Lead angle: 80° Clearance angle: 0° Corner radius: 0.2 mm Special features Material: carbide Coating: PVD Grade: AH6225 Plate form: rhombic Hole: with cylindrical hole Chipbreaker: double-sided Application: turning; suitable for stainless steels FAQ What materials is this insert best suited for? The CNMG120402 AH6225 insert is designed primarily for stainless steels; the PVD-coated carbide grade AH6225 offers broad applicability across common stainless grades under medium cutting conditions. How does the chipbreaker influence machining? The double-sided chipbreaker on this ISO turning insert promotes controlled chip formation and evacuation, reducing re-cutting and improving process stability during turning. Which holder characteristics must be checked before use? Verify holder compatibility by checking form, clearance angle (0° for this insert), tolerance class, fastening method, size (12 mm) and plate thickness (4.76 mm) so the CNMG120402 seats and clamps correctly. Does the insert provide a good surface finish and tool life balance? Yes; the 0.2 mm corner radius and PVD coating of the AH6225 grade balance edge strength with finish quality, offering a compromise between surface integrity and wear resistance. Is this an ISO-standard insert and how does that help procurement? The plate follows ISO specifications, which simplifies selection and stock management when matching pockets and fastening systems across standard turning holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120402 AH6225 Wendeplatten - Tungaloy
Benefit from a sturdy cutting edge, universal AH6225 grade and ISO geometry for consistent medium-duty turning of stainless steels; order directly via Metav Werkzeuge or consult the technical team for tailored advice. CNMG 120402 AH6225 Turning Insert – PVD-coated carbide, 0.2 mm radius (Tungaloy) A CNMG120402 AH6225 insert for ISO-based turning applications, optimised for medium cutting conditions and reliable performance on stainless steels. ISO rhombic 80° geometry PVD-coated carbide grade AH6225 0.2 mm corner radius for versatility Double-sided insert with cylindrical hole Stable edge for consistent stainless-steel turning The PVD-coated carbide composition of this insert ensures a sharp yet robust cutting edge, particularly suited to machining stainless steels under variable conditions. The AH6225 grade combines wear resistance with controlled edge geometry, which reduces the risk of edge chipping and preserves surface finish over extended cuts. For shops seeking predictable tool life and repeatable results, the CNMG form delivers a balance between toughness and wear resistance while the 0.2 mm corner radius supports a wide range of turning tasks without compromising profile accuracy. Simple system integration and predictable fit Designed as an ISO-standardised insert, the rhombic CNMG form matches common clamping systems by shape, relief angle and thickness; compatibility is defined by form, relief, tolerance class, fastening, size and thickness. The insert’s cylindrical hole and standard dimensions make it a drop-in option for many external holders and boring bars, simplifying tool management. Using standardised components reduces setup time and minimises inventory complexity, enabling faster changeovers and lower organisational overhead in production environments. Productivity through chip control and economy The double-sided chipbreaker supports stable chip formation during external and internal turning, which contributes to smoother machining and reduced machine downtime. Because the insert can be indexed, two cutting edges are available per side, extending the effective lifetime and lowering cost per cutting edge. The combination of a resilient substrate and the AH6225 coating is optimised for medium cutting speeds common in stainless-steel operations, helping to maintain surface quality and process stability across batch runs. Practical selection guidance for reliable results When selecting an insert for a specific turning task, match the chipbreaker and grade to workpiece material, machining method and machine stability. For stainless steels under medium conditions, AH6225 is a universal choice offering a compromise between initial sharpness and edge protection. The CNMG geometry is particularly suitable for turning profiles and general external operations; for finishing passes the smaller corner radius supports finer surface quality while for heavier cuts consideration of larger radii and alternative grades is advised. Contact Metav Werkzeuge for tailored technical consultation or to request the CNMG120402 AH6225 insert from Tungaloy; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6950918 Manufacturer SKU: TUN6950918 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Name: CNMG120402 AH6225 Tungaloy insert Core measurements Size: 12 mm Thickness: 4.76 mm Corner radius: 0.2 mm Relief angle: 0° Insert angle: 80° Features & compatibility Material: cemented carbide Coating/grade: AH6225 (PVD) Geometry: rhombic CNMG form Hole: with cylindrical hole Chipbreaker: double-sided Application: Turning System: ISO standard insert FAQ What materials is this insert best suited for? The CNMG120402 AH6225 insert from Tungaloy is formulated for machining stainless steels and performs well under medium cutting conditions. Can the insert be used in common ISO holders? Yes, the CNMG geometry and standard thickness ensure compatibility with ISO-standard external holders and boring bars when form, relief and fastening match. How does the AH6225 grade affect tool life? AH6225 offers a balance of edge sharpness and durability; the PVD coating improves wear resistance and contributes to consistent tool life on stainless-steel workpieces. Is chip control suitable for internal and external turning? The double-sided chipbreaker supports controlled chip formation for both external and internal turning, aiding surface finish and process stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120402 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide grade AH6225, stable cutting geometry and ISO conformity for reliable turning of stainless steel and similar materials. Order the CNMG 120402 AH6225 insert directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. CNMG 120402 AH6225 indexable turning insert for Turning by Tungaloy CNMG 120402 AH6225 is an ISO-standard rhombic indexable insert designed for external and internal turning, offering a sharp yet robust cutting edge optimised for stainless steel. ISO-standard rhombic insert PVD-coated carbide grade AH6225 0° relief angle for steady cutting Consistent performance for mixed machining conditions The ISO-standard rhombic geometry delivers predictable cutting behaviour across a wide range of turning tasks. The PVD-coated carbide composition provides a balance of wear resistance and edge toughness, making it suitable for medium cutting conditions and variable tool engagement. With an 80° cutting angle and corner radius 0.2 mm, the insert maintains dimensional stability while producing consistent chip formation. The hard-faced coating reduces adhesion and improves edge life when machining stainless steel, helping to maintain cycle times and part quality. Practical benefits of the AH6225 grade The AH6225 grade is engineered as a universal solution for stainless steels, offering a sharp yet durable cutting edge that copes with interrupted cuts and varying process conditions. This composition supports a stable cutting edge under moderate cutting parameters and helps to avoid built-up edge formation commonly encountered with stainless materials. The double-sided chipbreaker design contributes to repeatable chip control, which reduces vibration and aids in achieving the required surface finish with fewer reworks. Compatibility and mounting guidance The insert is ISO-specification compliant and compatibility with a toolholder depends on form, relief angle, tolerance class, mounting method, size and thickness. The insert features a cylindrical hole for secure clamping and is supplied in the rhombic shape with a thickness of 4.76 mm and a nominal size of 12 mm, facilitating straightforward replacement in standard CNMG seats. The 0° relief angle ensures a full-face contact geometry in many holder designs, promoting rigidity during external turning and light internal operations. Application scenarios and process advice This grade and geometry are particularly effective for general-purpose turning of stainless steel in job-shop and production environments where flexibility and repeatable results are required. Choose the AH6225 variant when a combination of edge sharpness and toughness is needed rather than aggressive high-speed removal. For best results, match the insert to a suitable holder and adjust feeds and speeds to the workpiece condition; the PVD-coated carbide surface helps reduce friction and extends tool life during sustained cycles. For reliable supply and technical guidance on the CNMG 120402 AH6225 insert from Tungaloy, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for availability and machining recommendations. Technical data Manufacturer article number: 6950908 Manufacturer SKU: TUN6950908 SKU: 6950908-Tungaloy Designation: CNMG120402 AH6225 Key dimensions Corner radius: 0.2 mm Plate size: 12 mm Thickness: 4.76 mm Cutting angle: 80° Relief angle: 0° Features and materials Material: carbide Coating/grade: AH6225 (PVD-coated) Plate shape: rhombic Mounting: with hole Hole style: cylindrical hole Chipbreaker: double-sided Application: Turning FAQ What materials is this insert best suited to machine? The CNMG 120402 AH6225 insert is specified for stainless steel and similar alloys; the AH6225 PVD-coated carbide provides balanced wear resistance and cutting edge stability for these materials. Is the insert compatible with standard CNMG holders? Compatibility is determined by ISO form, relief angle, tolerance and thickness; the CNMG 120402 AH6225 follows ISO dimensions and fits standard CNMG toolholders that accept rhombic inserts with a cylindrical hole. How does the AH6225 coating affect tool life? The AH6225 PVD coating enhances resistance to adhesion and wear on stainless steel, extending edge life under moderate cutting conditions and improving process consistency. Is the insert reversible or single-use per side? The CNMG geometry is double-sided and designed to be indexed for additional cutting edges; the double-sided chipbreaker supports repeated use while maintaining chip control. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120402 AH8015 Wendeplatten - Tungaloy
Benefit from the PVD-coated carbide AH8015, 0.2 mm corner radius and ISO compatibility for reliable turning of heat‑resistant alloys; expect stable cutting edges, good wear resistance and easy indexability. Order the CNMG120402 AH8015 insert via Metav Werkzeuge or consult our technical team for tailored machining advice. CNMG 120402 AH8015 indexable turning insert for Drehen by Tungaloy CNMG120402 AH8015: an ISO‑format indexable insert engineered for general turning applications, especially suited to heat‑resistant alloys. PVD-coated carbide AH8015 for heat-resistant alloys Rhombic form with 80° approach angle Double-sided chipbreaker for economical indexing 0.2 mm corner radius for balanced edge strength Consistent performance on heat‑resistant alloys The grade is a PVD-coated carbide AH8015, selected as a first choice for the general machining of heat‑resistant alloys. The coating improves surface hardness and wear resistance, which translates into longer tool life under high temperatures and reduced flank wear. For production environments this means fewer insert changes and higher process stability; the technical balance between wear resistance and edge stability supports repeatable results in series turning. Geometry and holder compatibility explained Compatibility with the toolholder depends on the insert form, 0° relief angle, tolerance class, clamping method, size and thickness. The rhombic shape and 80° approach angle offer a universal geometry for both axial and radial engagements, while the standard ISO format simplifies sourcing and holder selection. When choosing a holder, match the plate thickness of 4.76 mm and the size designation to ensure secure clamping and correct cutting line. Robust cutting edge and chip control for productivity A 0.2 mm corner radius provides a compromise between edge strength and finish. Combined with a double-sided chipbreaker, the insert enables controlled chip formation across a range of cutting conditions. This yields efficient evacuation of swarf and consistent surface quality in both outer and inner turning operations. The two usable cutting edges per side improve economy without compromising the stable cutting edge required for interrupted cuts or tougher alloys. Practical selection and machining guidance Choose the chipbreaker and grade depending on the workpiece material, machining type and set‑up stability. For moderate to high cutting speeds the PVD-coated carbide performs reliably; for very unstable set‑ups favour larger radii and reduced depths of cut. Because the insert is ISO‑format, replacement and reordering follow standard industrial practice, simplifying inventory management and operator training. Where high process reliability is critical, selecting the appropriate insert geometry reduces scrap and increases throughput. For reliable turning performance with Tungaloy's AH8015 grade, contact Metav Werkzeuge for availability and application support at info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants provide practical machining recommendations and fast delivery options. Technical Data Article number: 6950919 Manufacturer SKU: TUN6950919 Our SKU: 6950919-Tungaloy Model series: ISO-indexable turning plates Facts Size designation: 12 Thickness: 4.76 mm Angle: 80° Relief angle: 0° Corner radius: 0.2 mm Special features Material: cemented carbide Coating: AH8015 (PVD-coated) Shape: rhombic Hole: with cylindrical hole Chipbreaker: double-sided Application: turning (outer and inner) ISO format: CNMG120402 FAQ What materials is this insert designed for? The CNMG120402 AH8015 insert is intended primarily for heat‑resistant alloys, offering a balanced combination of wear resistance and edge stability for general turning. How does the AH8015 coating affect performance? The PVD-coated AH8015 layer increases surface hardness and abrasion resistance, extending the usable life of the insert under elevated cutting temperatures. Is this insert compatible with standard ISO holders? Yes, the CNMG120402 follows ISO geometry; compatibility is determined by form, relief angle, clamping method, size and thickness, so match the holder to these parameters. How many cutting edges are available per insert? This rhombic, double-sided chipbreaker insert provides multiple indexable edges, improving economy and reducing machine downtime for replacements. What is the manufacturer article number and SKU for ordering? Manufacturer article number 6950919 and our SKU 6950919-Tungaloy reference the CNMG120402 AH8015 Tungaloy indexable turning insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMG 120402 AH8015 Wendeplatten - Tungaloy
Benefit from the combination of PVD-coated AH8015 grade and the ISO CNMG120402 geometry for reliable turning of heat-resistant alloys; the double-sided chipbreaker and 0.2 mm corner radius deliver consistent edge stability and chip control. Order directly via Metav Werkzeuge or request application advice from our consultants. CNMG 120402 AH8015 indexable insert for turning — Tungaloy The CNMG120402 AH8015 is an ISO-standard indexable insert engineered for external and internal turning of heat-resistant alloys, offering a balanced mix of wear resistance and edge stability. ISO-standard CNMG geometry PVD-coated AH8015 carbide grade Double-sided chipbreaker 0.2 mm corner radius, 80° rhombic form Reliable performance for heat-resistant alloys The CNMG120402 grade combines a PVD-coated AH8015 substrate with a geometry optimised for heat-resistant alloys. This composition achieves a compromise between wear resistance and cutting-edge stability, which reduces flank wear under thermal stress and extends productive cutting time. For general-purpose turning of high-temperature alloys, the carbide grade provides predictable abrasion behaviour and helps to maintain dimensional accuracy over longer tool life. Choosing this grade supports repeatable process windows in batch and single-part production. Consistent chip control and improved surface quality The rhombic 80° form and double-sided chipbreaker design promote controlled chip formation and evacuation during interrupted or continuous cuts. With a 0.2 mm corner radius, the insert offers a robust edge for stable engagement while supporting acceptable surface finish on turned components. The 0° clearance angle influences toolwork contact and should be considered when pairing the insert with a toolholder to achieve the desired cutting geometry. Together, these features translate into fewer machining interruptions, better surface integrity and a lower cost per component in longer production runs. ISO compatibility and practical mounting guidance As an ISO-standard CNMG120402 insert, compatibility with the chosen holder depends on matching the insert form, clearance angle, tolerance class, fixing method, size and thickness. The typical system comprises the indexable insert, a matching external holder or boring bar, a support/locking kit and replacement screws. Select the chipbreaker and grade according to the workpiece material, machining type and required stability; this ensures consistent performance when the insert is integrated into existing tool systems. The balanced specification of this insert simplifies inventory management and replacement planning in workshop environments. For tailored application advice, technical comparisons or to request compatibility checks for Tungaloy inserts, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 6950909 SKU: 6950909-Tungaloy Manufacturer SKU: TUN6950909 Manufacturer: Tungaloy Facts Insert designation: CNMG 120402 Insert size: 12 mm Thickness: 4.76 mm Corner radius: 0.2 mm Relief angle: 0° Included angle: 80° Special features Shape: rhombic Hole: with cylindrical hole Chipbreaker: double-sided Grade/coating: AH8015, PVD-coated carbide Series: ISO turning indexable inserts Application: turning of heat-resistant alloys FAQ What materials is this insert suitable for? The CNMG120402 AH8015 insert is intended for the general machining of heat-resistant alloys; the AH8015 PVD-coated carbide balances wear resistance and edge stability for this material class. How is compatibility with my holder determined? Compatibility is determined by matching the insert form, relief angle, tolerance class, fixing method, size and thickness; the CNMG120402 designation specifies the ISO geometry to check against the holder. Does the insert require a specific chipbreaker selection? The double-sided chipbreaker on this insert supports a range of turning operations; select the chipbreaker geometry and grade according to workpiece material, machining type and machine stability for optimal chip control. What benefits does the 0.2 mm corner radius provide? A 0.2 mm corner radius increases edge strength and vibration resistance, helping to sustain surface finish and extend tool life under typical turning loads when using the CNMG120402 AH8015 insert. Is this an original Tungaloy product and what is the SKU? Yes, the CNMG120402 AH8015 turning insert is an original Tungaloy product, manufacturer article number 6950909 and SKU 6950909-Tungaloy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120402 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD‑coated carbide durability, an 80° rhombic geometry for versatile turning and a precise 0.2 mm corner radius for repeatable surface quality; order the insert directly via Metav Werkzeuge or consult our technical team for application-specific guidance. CNMG 120402 AH8015 Tungaloy — ISO turning insert for general turning applications CNMG 120402 AH8015 Tungaloy is an ISO‑normed indexable insert designed for turning, especially suited to heat‑resistant alloys and general-purpose turning operations ISO‑normed 80° rhombic geometry PVD‑coated carbide AH8015 grade Double‑sided with cylindrical hole 0.2 mm corner radius for precision 4.76 mm thickness for stable clamping Reliable performance for heat‑resistant alloys The combination of a PVD‑coated carbide substrate and the AH8015 grade provides a balanced mix of wear resistance and cutting edge stability, making the insert a dependable choice when machining heat‑resistant alloys. The coating reduces adhesive wear and improves surface finish under elevated temperatures, while the substrate maintains flank and crater wear control. For production environments this means longer tool life and greater process consistency, which reduces downtime and the need for frequent insert changes. Secure clamping and ISO compatibility minimise setup risk Designed as an ISO‑normed insert, compatibility with matching holders depends on form, relief angle, tolerance class, clamping method, size and thickness. The 80° rhombic geometry combined with a cylindrical hole and double‑sided design ensures a secure seat in the pocket and straightforward indexing. The standard format simplifies tool inventory and reduces set‑up errors, delivering stable cutting conditions that help maintain part tolerances and surface quality across shifts. Precision features that improve part quality A 0.2 mm corner radius provides a controlled transitional edge that helps achieve consistent surface finish without sacrificing dimensional control. The rake angle of 0° supports robust cutting for a range of feed and depth settings, while the 4.76 mm thickness contributes to resistance against vibration and edge chipping in heavier cuts. These characteristics translate into measurable benefits: fewer rejects, predictable tool change intervals and improved throughput in mixed‑material production. Application guidance and practical advantages The insert is recommended for external and internal turning operations where a general-purpose grade for difficult, heat‑resistant materials is required. The double‑sided chipbreaker design extends usable life per index and keeps stock of spares to a minimum. When selecting a holder, match form, clearance and tolerance class to secure the best performance; following these steps ensures the insert achieves its expected durability and accuracy in daily use. The product is identified as CNMG120402 within Tungaloy’s AH8015 offering and suits workshops seeking a balance of economy and stable chip formation. Contact Metav Werkzeuge for application-specific advice and availability of Tungaloy CNMG120402 AH8015 inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6966062 SKU manufacturer: TUN6966062 SKU: 6966062-Tungaloy Data Geometry: 80° Corner radius: 0.2 mm Thickness: 4.76 mm Size: 12 Rake angle: 0° Hole style: cylindrical hole Special features PVD‑coated carbide (AH8015) Double‑sided insert with chipbreaker ISO‑normed rhombic shape (CNMG120402) Compatible for external and internal turning Designed for heat‑resistant alloys FAQ What materials is this insert suitable for? The CNMG120402 AH8015 insert is optimised for machining heat‑resistant alloys; the AH8015 grade provides balanced wear resistance and edge stability for such materials. How is the insert mounted in a holder? Mounting requires a matching ISO‑style holder that fits the 80° rhombic form, thickness and the cylindrical hole; secure clamping ensures correct seating and repeatable performance. Can the insert be indexed to use both sides? Yes, the insert is double‑sided, allowing indexing to the unused edge to extend usable life and reduce tooling costs. What does the 0.2 mm corner radius mean for surface finish? A 0.2 mm corner radius gives a controlled edge transition that improves surface finish while maintaining dimensional accuracy in turning operations. Is the AH8015 coating suitable for high‑temperature cutting? The PVD‑coated AH8015 grade is specifically selected for elevated temperature resistance and stable wear behaviour during cutting of heat‑resistant alloys. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120402 NS9530 Wendeplatten - Tungaloy
Take advantage of the NS9530 finishing grade and the insert's stable geometry for consistently high surface quality and low cutting forces; order directly via Metav Werkzeuge or consult the technical team for application-specific recommendations. CNMG 120402 NS9530 — Turning insert (finishing) by Tungaloy A CNMG120402 NS9530 indexable insert engineered for precision external and internal turning of steel in finishing applications Finishing grade NS9530, uncoated cermet Sharp cutting edge for low cutting forces Rhombic CNMG shape, 80° cutting geometry 0.2 mm corner radius, double-sided chipbreaker High-precision finishing for steel components The CNMG120402 NS9530 insert is a finishing-grade solution tailored to deliver excellent surface finish on steel components through a combination of a sharp cutting edge and low cutting forces. The uncoated cermet composition provides a chemically stable, hard cutting edge that maintains geometry during continuous cuts and small depths of cut, making it particularly suitable for operations where surface integrity and dimensional accuracy are priorities. By reducing cutting forces, the insert helps lower vibration, which in turn supports consistent part quality and extended tool life. Geometry and material deliver measurable process benefits Engineered as a rhombic CNMG, the insert features an 80° included angle, a 0° clearance, a 0.2 mm corner radius and a plate thickness of 4.76 mm, all of which contribute to predictable cutting behaviour and mounting stability. The double-sided chipbreaker supports two usable faces per side, improving cost efficiency and offering repeatable chip control when matched to appropriate machining conditions. The base material—carbide substrate with a cermet cutting surface—combines wear resistance with edge sharpness to produce fine surface textures on steels without reliance on a coating. System compatibility and practical selection guidance This insert conforms to the ISO series of turning inserts and forms part of a system comprising a matching external holder or boring bar, underlay/clamping set and fastening screws; compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness. The double-sided, rhombic design and cylindrical hole require a compatible clamping seat and screw arrangement. For best results, select the chipbreaker and grade according to the specific steel alloy, the intended cut (continuous vs interrupted) and machine-tool stability. The combination of the NS9530 grade and the rhombic CNMG geometry is engineered to enhance process reliability while delivering efficient finishing performance in shop-floor turning applications. For application-specific guidance on the Tungaloy NS9530 finishing grade and to request availability or a quotation, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930. Technical data SKU: 6950920-Tungaloy Manufacturer SKU: TUN6950920 Manufacturer article number: 6950920 Model series: ISO turning inserts Name: CNMG120402 NS9530 Core specifications ISO designation: 120402 Inscribed circle / size: 12 mm Thickness: 4.76 mm Corner radius: 0.2 mm Included angle: 80° Clearance angle: 0° Materials & features Material: carbide substrate Cutting material: uncoated cermet (NS9530) Chipbreaker: double-sided Hole: with cylindrical hole Plate form: rhombic (CNMG) Typical application: external and internal turning of steel Recommended for: finishing, continuous cuts, small depths of cut FAQ What materials is this insert intended for? The CNMG120402 NS9530 insert is a finishing-grade cermet designed primarily for machining steel, offering low cutting forces and a fine surface finish when used in continuous turning operations. How does the NS9530 grade affect performance? The NS9530 uncoated cermet provides a very sharp cutting edge with good wear resistance for finishing; the Tungaloy NS9530 grade is optimised to reduce cutting forces and improve surface integrity under stable conditions. Is the insert compatible with standard CNMG holders? Compatibility is determined by holder form, clearance angle, tolerance class, fastening method, size and plate thickness; the CNMG120402 shape follows ISO dimensions and requires a holder matching those parameters. Can the insert be used for interrupted cuts? The insert is optimised for continuous cuts and small depths of cut; for interrupted machining, choose a chipbreaker and grade selected for the specific material and stability requirements rather than relying solely on this finishing grade. How many cutting edges are available per insert? The double-sided chipbreaker design provides multiple usable edges; specific edge counts depend on the insert orientation and indexability on the chosen holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120402 NS9530 Wendeplatten - Tungaloy
Benefit from the combination of a sharp uncoated cermet grade and a precise 0° relief geometry for superior surface finish and low cutting forces; this delivers consistent finishing results in continuous turning operations. Order the insert directly via Metav Werkzeuge or consult their application experts for tailored advice. CNMG120402 NS9530 CNMG turning insert for turning – Tungaloy The CNMG120402 NS9530 Tungaloy indexable insert is an ISO‑compliant rhomboid turning insert designed as a finishing grade for steel, offering a sharp cutting edge and stable performance in continuous cuts. Uncoated cermet NS9530 for finishing 0° relief angle for accurate profiles 0.2 mm corner radius for fine detail ISO rhomboid insert with cylindrical hole Exceptional finishing performance with low cutting forces The finishing grade is built on an uncoated cermet substrate that prioritises surface quality and edge stability. Thanks to the NS9530 formulation and the inherently sharp cutting geometry, the insert produces low cutting forces and a consistently fine surface, reducing the need for secondary finishing. Intended for continuous cuts and small depths of cut, this geometry is especially effective where visual and dimensional surface quality are critical. The cemented carbide backing ensures sufficient support for the cutting edge under finishing conditions. Reliable fitment and straightforward toolholder compatibility Compatibility with toolholders is defined by shape, relief angle, tolerance class, fixing method, size and thickness, and this insert follows ISO conventions to ease integration into existing tool systems. The 0° relief and the rhomboid form factor make it suitable for standard CNMG toolheads; the cylindrical hole supports secure clamping and repeatable positioning. For workshops seeking predictable set‑up and quick indexability, the standard geometry helps to reduce machine downtime and simplifies inventory management. Application focus and material suitability for efficient machining This turning grade is optimised for finishing operations in steel, delivering repeatable edge performance and a stable chipflow with its double‑sided chipbreaker design. The small 0.2 mm corner radius permits accurate profile reproduction and fine-detail turning, while the 4.76 mm plate thickness provides structural rigidity during light finishing cuts. Where consistent surface integrity and tight tolerances matter, the combination of uncoated cermet and ISO form leads to both visual and dimensional benefits that support downstream assembly and inspection processes. For application guidance or to source the CNMG120402 NS9530 Tungaloy insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for specialist assistance and rapid processing Technical Data Article number: 6966063 Manufacturer article number: 6966063 SKU: 6966063-Tungaloy Manufacturer SKU: TUN6966063 Model series: ISO turning indexable inserts Manufacturer: Tungaloy Dimensions & Facts Inscribed circle / size: 12 mm Plate thickness: 4.76 mm Corner radius: 0.2 mm Relief angle: 0° Included angle: 80° Hole: cylindrical Design & Special Features Uncoated cermet grade NS9530 Cemented carbide substrate Double-sided chipbreaker Rhomboid plate form (CNMG) With cylindrical hole for secure clamping Designed for finishing of steel Compatibility determined by shape, relief angle, tolerance class, fixing, size and thickness FAQ Is this insert suitable for finishing operations on steel? The CNMG120402 NS9530 Tungaloy insert is specifically developed as a finishing grade for steel, offering a sharp edge, low cutting forces and high surface quality for continuous cuts and small depths of cut. What is the corner radius and how does it affect the finish? The corner radius is 0.2 mm; this small radius helps to reproduce fine profiles and achieve a superior surface finish while minimising deformation on thin sections. Which holders are compatible with this ISO insert? Compatibility follows ISO conventions: holders matching the CNMG form, plate size 12, thickness 4.76 mm, and a compatible clamping design for a cylindrical hole will provide reliable fitment. Is the insert coated or uncoated? This grade is an uncoated cermet (NS9530), optimised for finishing applications where a sharp, wear‑resistant cutting edge and excellent surface integrity are priorities. What chip control can be expected with this insert? The insert features a double‑sided chipbreaker designed to promote stable chip formation under continuous finishing cuts, improving process reliability and surface consistency. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMG 120402 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp cermet grade, precise ISO geometry and economical double-sided use for consistent finishing on steel; order the insert directly via Metav Werkzeuge or ask consultants for application support. CNMG 120402 NS9530 turning insert by Tungaloy — finishing cermet, 0.2 mm radius A CNMG 120402 NS9530 indexable insert designed for precision turning of steel, offering a finishing-grade uncoated cermet for low cutting forces and excellent surface quality. Cermet finishing grade NS9530 Sharp cutting edge for fine surface finish 0.2 mm corner radius, 80° insert geometry Double-sided chipbreaker, cylindrical hole Deliver consistently improved surface finish with a cermet finishing grade The uncoated cermet grade NS9530 is formulated for finishing operations on steel, delivering a finishing edge that keeps cutting forces low and reduces vibration. This results in measurable improvement in surface integrity and dimensional stability when making continuous passes with small depths of cut. For shops seeking predictable, high-quality finishes, the combination of a sharp cutting edge and a robust substrate supports longer intervals between regrinds and less rework. Predictable geometry for reliable process planning Manufactured to ISO dimensions, the insert features an included angle of 80° and a clearance angle of 0°, which together stabilise cutting forces and direction of chip flow. The modest 0.2 mm corner radius balances edge strength and the ability to achieve fine surface textures. Because compatibility with the holder is determined by form, clearance, tolerance class, fastening, size and thickness, using ISO-standardised inserts simplifies fixture selection and inventory management while enabling repeatable cycle-time planning. Application advantages and recommended cutting conditions This indexable solution is optimised for external and internal turning where continuous cuts and small depths of cut are common. The continuous cuts recommendation aligns with the uncoated cermet’s strengths: a sharp edge for excellent finish and low built-up edge tendency on steels. The double-sided chipbreaker and the rhombic plate form with a cylindrical hole allow cost-effective indexing and simple clamping arrangements, which supports higher productivity in finishing operations without sacrificing component quality. Practical integration into the production cell As part of a system comprising an ISO insert, a matching external holder or boring bar, shims and clamping sets, the insert is straightforward to install and index. The rhombic plate shape and the cylindrical hole facilitate stable location and secure fastening. For teams planning tool lists or retrofitting turning centres, this insert reduces set-up variability thanks to standardised dimensions and well-understood handling procedures, aiding faster process qualification and drift-free production runs. For precision finishing with Tungaloy inserts, contact Metav Werkzeuge for availability and tailored application advice — info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6950912 Manufacturer SKU: TUN6950912 SKU: 6950912-Tungaloy Designation: CNMG120402 NS9530 Tungaloy indexable insert Core specifications Insert size: 12 mm Included angle: 80° Corner radius: 0.2 mm Clearance angle: 0° Plate thickness: 4.76 mm Special features Material: carbide Grade: NS9530 (uncoated cermet) Plate form: rhombic Hole: with cylindrical hole Chipbreaker: double-sided Series: ISO turning indexable inserts FAQ What materials is this insert intended for? This Tungaloy CNMG 120402 NS9530 insert is intended primarily for turning steel, offering a finishing-grade solution that performs best in continuous cutting on steels. Is the cutting edge coated? The grade NS9530 is an uncoated cermet, providing a sharp edge for superior surface finish rather than a coating-based wear layer. How is compatibility with a toolholder ensured? Compatibility is determined by insert form, clearance angle, tolerance class, fastening, size and thickness; check holder specifications against the ISO dimensions of the insert before fitting. Can both sides of the insert be used? The double-sided chipbreaker and rhombic plate form allow the insert to be indexed and used on both faces before replacement. For which operations is this insert recommended? The insert is recommended for external and internal turning where fine surface quality and small depths of cut are required, particularly in continuous cutting applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120402 T6215 Wendeplatten - Tungaloy
Combining the CVD-coated T6215 grade, the 0.2 mm nose radius and the ISO CNMG form delivers durable wear resistance and consistent surface finish in stainless-steel turning; order the insert directly via Metav Werkzeuge or consult our specialists for holder compatibility and application advice. CNMG 120402 T6215 indexable insert for turning — Tungaloy, CVD-coated, 0.2 mm radius The CNMG120402 T6215 indexable insert for turning provides a wear-resistant, CVD-coated solution optimised for stainless-steel applications under steady to lightly interrupted cuts CVD-coated carbide grade T6215 ISO CNMG 120402 rhombic insert 0.2 mm nose radius for fine finishes Double-sided chipbreaker, cylindrical hole Consistent performance for stainless-steel turning The CVD-coated cemented carbide matrix of this insert offers high wear resistance specifically designed for machining stainless steel under stable to slightly interrupted conditions. The T6215 grade balances edge stability and toughness, which reduces flank wear and helps maintain dimensional accuracy across longer tool life. In practice, this means fewer tool changes and more predictable component quality — a direct contribution to improved cycle-time efficiency and reduced scrap rates in serial production. Geometry and compatibility that simplify set-up The rhombic CNMG geometry with an 80° lead angle and a 0° relief provides a versatile cutting edge suited for both external and internal turning operations. The insert’s 0.2 mm nose radius supports fine surface finishes while the 4.76 mm thickness and 12 mm size ensure mechanical stability in standard ISO toolholders. Compatibility with a holder depends on form, relief angle, tolerance class, mounting method, size and thickness; selecting the correct holder and clamping kit is essential for achieving the intended performance and repeatability in the machining process. Practical benefits for production and process security With a double-sided chipbreaker and a cylindrical hole for secure fastening, the insert promotes stable chip formation and reliable clamping under load. The design aims to reduce vibrations and maintain a stable cutting edge during continuous runs, which supports consistent surface quality and extended insert life. For workshop planners, this results in lower downtime and more predictable maintenance intervals, contributing to overall process security and cost-efficiency in turning operations. For application advice, toolholder compatibility checks or to secure stock of Tungaloy CNMG120402 T6215 inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss requirements and delivery options. Technical Data Article number: 6950917 SKU: 6950917-Tungaloy Manufacturer SKU: TUN6950917 Model series: ISO turning indexable inserts Facts Lead/approach angle: 80° Nose radius: 0.2 mm Thickness: 4.76 mm Size: 12 mm Relief angle: 0° Special features Grade: T6215 (CVD-coated cemented carbide) Insert form: rhombic Hole: cylindrical hole Chipbreaker: double-sided Intended application: external and internal turning of stainless steels under stable to slightly interrupted conditions System: ISO insert with compatible outer holder, clamping set and replacement screws FAQ Is this insert suitable for machining stainless steel? Yes. The CNMG120402 T6215 insert features a CVD-coated cemented carbide grade developed for stainless-steel turning under stable to lightly interrupted conditions. What chip control does the insert provide? The insert is supplied with a double-sided chipbreaker, designed to promote stable chip formation and reduce the risk of troublesome swarf in turning operations. How does one ensure compatibility with a toolholder? Compatibility is determined by insert form, relief angle, tolerance class, mounting method, size and thickness; verifying these parameters against the chosen toolholder ensures correct seating and clamping. Does the insert have a central hole and what is its style? Yes. The insert is provided with a cylindrical hole to suit standard clamping and fastening arrangements in compatible holders. What are the key geometry values to consider for set-up? Important measurable values include the 80° lead angle, 0.2 mm nose radius, 4.76 mm thickness and 12 mm size, which together influence cutting forces, finish and mechanical stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120402 T6215 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide T6215 and the rhombic CNMG120402 form for dependable performance in turning applications; order genuine parts directly via Metav Werkzeuge or consult the team for application advice. CNMG 120402 T6215 Turning Insert by Tungaloy — rhombic 80° form, 0° clearance CNMG120402 T6215 is an ISO-standard rhombic turning insert optimised for stable to lightly interrupted cuts in rostfreier Stahl. CVD-coated carbide T6215 Rhombic 80° geometry Cylindrical mounting hole Double-sided chipbreaker design Durable grade and consistent edge life for industrial turning The CVD coating on this cemented carbide grade provides high wear resistance and thermal stability, making the insert suitable for continuous and light interrupted turning of rostfreier Stahl. The hardened substrate in combination with the coating ensures predictable flank wear and extended tool life, which translates into reduced tool-change frequency and higher machine uptime. Choosing a CVD-coated grade such as T6215 supports process reliability and helps to maintain dimensional accuracy across long production runs. Secure clamping and ISO compatibility to reduce setup risks Compatibility with the toolholder is determined by form, clearance angle, tolerance class, fastening, size and thickness. The rhombic form with an 80° included angle and a cylindrical hole gives a stable seat in ISO-compatible holders and boring bars; correct selection of insert orientation and clamping torque reduces vibration and improves surface quality. The 0° clearance angle demands careful holder geometry but, when matched correctly, promotes rigidity and repeatable cutting results. Chip control and application fit for external and internal turning The double-sided chipbreaker geometry supports reliable chip evacuation under varied cutting conditions and is designed to be paired with a chipbreaker and grade suited to the workpiece, machining strategy and machine stability. For external and internal turning operations, the rhombic shape balances cutting edge strength with accessibility, enabling turning in more confined contours while maintaining consistent finish and form. Selection of the correct chipbreaker and grade helps to avoid built-up edge and to optimise cycle times. Operational benefits and selection guidance Selecting the right insert involves considering material, coating and chipbreaker against the machining task; the T6215 grade is formulated for wear resistance on rostfreier Stahl and is a pragmatic choice where process stability and predictable tool life are priorities. Use the insert in combination with an appropriate holder, substrate support and clamping set; regular inspection of edge condition and adherence to recommended cutting parameters will preserve performance and prevent premature failure. For reliable procurement and application support with Tungaloy turning inserts, contact Metav Werkzeuge: info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and delivery options. Technical Data Article number: 6950904 Manufacturer SKU: TUN6950904 SKU: 6950904-Tungaloy Designation: CNMG120402 Model series: ISO turning inserts Material: Hartmetall Grade/coating: T6215, CVD-coated Core data Insert size: 12 mm Thickness: 4.76 mm Corner radius: 0.2 mm Included angle: 80° Clearance angle: 0° Mounting style: with hole, cylindrical hole Features & applications Rhombic insert form Double-sided chipbreaker Suitable for external and internal turning Intended for rostfreier Stahl under stable to lightly interrupted conditions ISO-standard interchangeability with compatible holders FAQ What materials is this insert best suited to machine? The CNMG120402 T6215 turning insert is designed primarily for machining rostfreier Stahl; the T6215 grade and CVD coating are selected for wear resistance in those conditions. How does the insert mount in a holder and what must be checked? The insert uses a cylindrical hole for secure clamping; confirm holder seat form, tolerance class, fastening method, size and thickness to ensure proper fit for the CNMG120402 insert. Is the chip control suitable for interrupted cuts? The double-sided chipbreaker design offers dependable chip control in stable to lightly interrupted conditions; choose the chipbreaker and cutting data to match the specific operation. Which model or SKU should be ordered for this specification? Order the item by manufacturer article number 6950904 or SKU 6950904-Tungaloy to obtain the CNMG120402 T6215 insert from Tungaloy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120402 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide, an 80° rhombic geometry and a 0.2 mm corner radius for consistent chip control and extended tool life during turning operations; order the insert directly via Metav Werkzeuge or consult the team for application advice. CNMG 120402 T6215 turning insert — Tungaloy, CVD-coated carbide, 0.2 mm radius CNMG120402 T6215 is an ISO-format indexable insert designed for turning applications, optimised for stainless steels under stable to lightly interrupted cutting conditions. CVD-coated carbide for wear resistance 80° rhombic geometry for versatile turning 0.2 mm corner radius for fine finishing Double-sided with cylindrical hole for secure clamping Increased productivity through longer tool life The CNMG120402 insert combines a CVD coating with a wear-resistant carbide substrate, providing a measurable increase in service life compared with uncoated grades. The coating reduces flank and crater wear, which translates into fewer indexings and less downtime. This results in higher process efficiency and a lower cost per component when machining medium-hard and stainless materials. The design supports stable cutting conditions, so the primary benefit is sustained cutting performance with predictable maintenance intervals. Consistent surface quality and chip control for stainless steels The 80° rhombic geometry and the double-sided chipbreaker are tuned to promote controlled chip formation when machining stainless steels, where work hardening and built-up edge are common challenges. The modest 0.2 mm corner radius enables fine finishing passes, producing improved surface finishes while maintaining edge strength. As a result, the insert enables reliable dimensional control and repeatable component quality, especially in serial production and precision-turning tasks where consistency matters. Simple integration and secure clamping for workshop use Compatibility with standard ISO holders is assured through the insert’s form, clearance angle, tolerance class, fastening method, size and thickness; the cylindrical hole supports positive location and repeatable clamping. The 4.76 mm thickness and standard 12 mm size ensure robust seating in common turning toolblocks, while the 0° relief angle reduces the risk of interference on profile work. The design therefore eases tool changeover, shortens setup time and contributes to a smoother production flow — particularly valuable in mixed-batch or tool-changing workplaces. For procurement and application support, contact Metav Werkzeuge for supply and tailored advice — Metav Werkzeuge can confirm compatibility with existing holders and recommend cutting data for specific stainless steel grades. Technical Data Article number: 6966060 SKU: 6966060-Tungaloy Manufacturer SKU: TUN6966060 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Size: 12 mm Thickness: 4.76 mm Corner radius: 0.2 mm Insert angle: 80° Relief angle: 0° Hole: with cylindrical hole Special features Material: carbide Coating / Grade: T6215 (CVD-coated) Geometry: rhombic, CNMG Chipbreaker: double-sided Application: turning, suitable for stainless steels Usage: compatible with ISO holders, designed for stable to lightly interrupted machining FAQ What materials is this insert best suited for? The CNMG120402 T6215 insert is optimised for stainless steels and performs well under stable to lightly interrupted turning conditions. How does the T6215 coating benefit machining? The T6215 CVD coating enhances wear resistance and reduces edge degradation, which helps maintain dimensional accuracy and extends the service life of the insert. Is the insert compatible with standard CNMG holders? Compatibility depends on holder form, clearance, tolerance class, fastening and size; the CNMG120402 geometry and cylindrical hole are designed for secure seating in ISO CNMG holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120402 T9215 Wendeplatten - Tungaloy
CNMG 120402 T9215 Wendeplatte – ISO-Drehwendeschneidplatte von Tungaloy CNMG 120402 T9215 verbindet CVD-beschichtetes Hartmetall mit robuster Geometrie für produktives Drehen mittlerer Stahlqualitäten. ISO-genormte CNMG-Form für zuverlässigen Sitz CVD-beschichtetes Hartmetall für hohe Standzeit Für mittlere Stahlbearbeitung optimiert Doppelseitiger Spanbrecher, rhombische Form Zylindrisches Loch, 4,76 mm Plattendicke Produktivität und Prozesssicherheit steigern Die CNMG 120402 T9215 Wendeplatte ist entwickelt für produktive Außen- und Innendrehprozesse bei mittleren Stahlqualitäten. Die Kombination aus CVD-beschichtetem Hartmetall und optimierter Spanform sorgt für konstante Zustellung und reduzierte Werkzeugwechsel, was die Produktivität sichtbar erhöht. Durch die hohe Verschleißfestigkeit bleibt die Oberflächenqualität der Werkstücke über längere Standzeiten stabil, wodurch Rüstzeiten und Stillstand minimiert werden. Material und Beschichtung: robust und belastbar Das CVD-beschichtete Hartmetall der Sorte T9215 bietet eine ausgewogene Balance aus Verschleißwiderstand und Bruchsicherheit. Diese Kombination macht die Wendeplatte zur ersten Wahl bei kontinuierlichem bis leicht unterbrochenem Schnitt. Der Anwender profitiert von gleichmäßigen Schneidkantenzuständen und einer verbesserten Bearbeitungssicherheit, speziell bei anspruchsvollen Stahllegierungen und wechselnden Schnittbedingungen. Konstruktion und Kompatibilität für einfache Integration Die rhombische Plattenform mit Eckenradius 0,2 mm, 4,76 mm Plattendicke und zylindrischem Loch gewährleistet einfache Montage in standardisierten ISO-Außenhaltern. Die CNMG-Geometrie und die Toleranzklasse sichern präzisen Sitz und Wiederholgenauigkeit, sodass sich Werkzeuge schnell und zuverlässig in bestehende Werkzeugaufbauten integrieren lassen. Das reduziert Rüstaufwand und vereinfacht Lagerhaltung durch ISO-konforme Austauschbarkeit. Zielgruppe und empfohlene Anwendungen Diese Wendeplatte richtet sich an Fertigungsbetriebe, Lohnfertiger und Instandhaltungswerkstätten, die wirtschaftliche Zerspanung bei Stahlprodukten benötigen. Ideale Einsatzfelder sind Serien- und Einzelteilfertigung im Maschinenbau sowie Reparaturarbeiten mit mittleren Schnittparametern. Durch die robuste Sorte T9215 lassen sich konstante Ergebnisse und gute Oberflächengüten erzielen, auch bei leicht unterbrochenen Schnitten. Empfehlung: Für produktive und zuverlässige Zerspanung die CNMG 120402 T9215 Wendeplatte von Tungaloy direkt über Metav Werkzeuge anfragen: info@metav-werkzeuge.com, +49 2822 7131930 Produktmerkmale Artikelnummer: 6950914 Marke: Tungaloy Serie / Baureihe: ISO-Drehwendeschneidplatten Bezeichnung: CNMG120402 Fakten Eckenradius: 0,2 mm Plattendicke: 4,76 mm Plattengröße: 12 Winkel: 80° Freiwinkel: 0° Besonderheiten Material: Hartmetall Sorte: T9215 (CVD-beschichtet) Plattenform: rhombisch Lochstil: zylindrisches Loch Spanbrecher: doppelseitig Anwendung: Drehen Einsatzbereich: mittlere Stahlbearbeitung Systemaufbau: ISO-genormte Drehplatte, passender Außenhalter oder Bohrstange, Unterlage/Klemmsatz und Ersatzschrauben FAQ Welche Werkstoffe lassen sich mit der CNMG 120402 T9215 am besten bearbeiten? Die CNMG 120402 T9215 Wendeplatte ist speziell für die mittlere Stahlbearbeitung ausgelegt und bietet dabei gute Verschleißfestigkeit und Bruchsicherheit für konstante Ergebnisse. Welchen Vorteil bringt die CVD-Beschichtung der Sorte T9215? Die CVD-Beschichtung der T9215-Sorte erhöht den Verschleißwiderstand und verlängert die Standzeit, was bei kontinuierlichen Schnittbedingungen die Produktivität steigert. Ist die Wendeplatte für unterbrochene Schnitte geeignet? Ja, die mechanische Robustheit der T9215-Sorte erlaubt den Einsatz bei leicht unterbrochenen Schnitten; dabei bleibt die Kantenschärfe länger erhalten. Welche Plattendicke und Lochausführung hat die Wendeplatte? Die Platte hat eine Plattendicke von 4,76 mm und ein zylindrisches Loch zur Befestigung in ISO-konformen Haltern. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CNMG 120402 T9215 Wendeplatten - Tungaloy
Take advantage of the T9215 CVD-coated carbide grade and the 0.2 mm corner radius in a robust ISO rhombic geometry to raise productivity and tool life in medium-duty turning; order directly via Metav Werkzeuge or consult the team for application advice. CNMG 120402 T9215 — ISO turning insert (rhombic, 80°) by Tungaloy The CNMG120402 T9215 is an ISO rhombic indexable insert for external and internal turning, engineered for productive machining of medium-strength components with a stable chipformer and reliable wear resistance CVD-coated carbide T9215 for high wear resistance Rhombic 80° geometry for stable cutting forces 0.2 mm corner radius for accurate contouring Double-sided chipbreaker for economical indexing Higher productivity through targeted coating and substrate The combination of a CVD-coated surface and a cemented carbide substrate provides a controlled wear pattern and consistent edge life, which directly reduces machining interruptions. This grade is tailored for medium-duty applications where a balance between wear resistance and fracture toughness is required; the result is longer intervals between indexings and fewer unscheduled tool changes. The engineered coating chemistry ensures predictable performance under continuous to slightly interrupted cuts while maintaining surface integrity on the workpiece. Geometry that stabilises the cut and improves surface finish An 80° included angle in a rhombic format delivers a wide bearing surface that dampens vibrations and distributes cutting loads. The modest 0.2 mm corner radius allows precise profile work without sacrificing edge strength, making the insert suitable for finishing passes and light roughing when stability is maintained. The zero-degree clearance specification supports a neutral cutting action that helps achieve consistent dimensional results and an improved nominal surface quality. Practical compatibility and reliable clamping As an ISO-standard insert, this indexable plate integrates into common holder systems when form, clearance angle, tolerance class, fastening and size match. The insert is furnished with a cylindrical hole, enabling secure mounting and repeatable positioning in compatible toolholders or boring bars. The double-sided chipbreaker design extends usable life by offering two cutting edges per index, increasing economy in high-volume setups without complex regrinding procedures. Choosing the right chipformer and process parameters Selecting the appropriate chipbreaker and cutting data maximises the benefits of the T9215 grade: for continuous cuts prefer moderate feed rates with stable support; for slightly interrupted conditions reduce cutting speed and favour the robust substrate to avoid chipping. The insert suits both external and internal turning operations when paired with a matching holder and correct clamping torque. Process planning that prioritises rigidity and consistent coolant supply will leverage the insert’s strengths for reproducible production output. For procurement or process consultation on the Tungaloy CNMG120402 T9215 insert, contact Metav Werkzeuge for application-specific advice and supply coordination at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — Metav Werkzeuge can advise on holder compatibility and cutting data. Technical data Article number: 6966058 Manufacturer SKU: TUN6966058 Label / Name: CNMG120402 T9215 Tungaloy insert Model series: ISO turning inserts Facts Corner radius: 0.2 mm Plate thickness: 4.76 mm Insert size: 12 mm Included angle: 80° Clearance angle: 0° Hole: cylindrical Special features Material: cemented carbide Coating: CVD, grade T9215 Shape: rhombic Chipformer: double-sided Application: turning (external and internal) Compatibility: ISO-standard insert family Mounting: with hole, compatible with appropriate holders Suitability: continuous to slightly interrupted cuts FAQ What materials is this insert intended for? The CNMG120402 T9215 insert from Tungaloy is optimised for medium-strength metals and components where a balance of wear resistance and toughness is required; it performs well on typical medium alloy and carbon workpieces. How many usable edges does the insert provide? This indexable plate features a double-sided chipbreaker, offering two primary cutting edges per side and therefore multiple indexing positions to extend effective tool life. Is the insert compatible with standard CNMG holders? Compatibility depends on matching form, clearance angle, tolerance class, fastening and size; the CNMG120402 conforms to ISO dimensions, so it fits holders specified for CNMG 120402 inserts when those parameters align. Which cutting situations suit the T9215 grade best? T9215 is designed for productive machining under continuous to slightly interrupted cuts where consistent wear resistance is required without compromising fracture toughness. What benefits does the CVD coating provide on this insert? The CVD-coated surface on the CNMG120402 T9215 improves wear resistance and stabilises edge behaviour, supporting longer service intervals and more reproducible surface finishes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120402 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide wear resistance, a 0.2 mm corner radius for reliable edge life and proven compatibility with ISO holders for consistent turning performance; order the insert directly via Metav Werkzeuge or ask the consultants for application support. CNMG120402 120402 T9215 — Tungaloy turning insert (rhombic, 0° rake) The CNMG120402 T9215 is a rhombic ISO turning insert designed for external and internal turning in medium steel applications, combining a CVD-coated carbide grade with a double-sided chipbreaker for sustained productivity CVD-coated carbide for high wear resistance Rhombic CNMG 80° geometry, 0° rake angle Double-sided chipbreaker for consistent chip control 0.2 mm corner radius for balanced edge strength High, consistent performance for medium-steel turning The rhombic ISO insert delivers stable cutting under continuous to lightly interrupted conditions thanks to the T9215 CVD-coated carbide grade. The coating provides enhanced wear resistance while the substrate maintains fracture toughness, so component quality and tool life are optimised. For machining medium-strength steels, this combination reduces downtime through predictable tool change intervals and supports higher feed rates where process stability permits. The result is a measurable improvement in cycle time without compromising surface integrity. Secure clamping and predictable compatibility Designed to match ISO-holder geometries, the insert’s 80° cutting geometry and 0° rake require selection of a compatible external holder or boring bar that respects form, clearance angles and tolerance class. The insert features a cylindrical locating hole and standard thickness to ensure repeatable seating and clamping. When assembled correctly, the system minimises vibration and runout, improving dimensional repeatability and reducing the risk of unexpected edge failure in production environments. Controlled chips and surface quality for reliable throughput The double-sided chipbreaker is engineered to produce short, manageable chips in medium steel, helping to maintain uninterrupted material flow and safe evacuation. Together with the 0.2 mm corner radius, the insert offers a balance between edge strength and surface finish, allowing for light finishing passes as well as more substantial stock removal. For manufacturers prioritising consistent part quality and process reliability, the insert supports stable cutting forces and reduces rework rates. Practical selection and application tips for workshop use When choosing grade and geometry, match the T9215 grade to workpiece material and cutting conditions: it is intended as a first choice for medium steel machining where both wear resistance and breakage resistance are required. Select the insert size and thickness to suit the holder and application rigidity; ensure coolant strategy and cutting parameters are aligned with the grade’s capabilities to prolong tool life. Compatibility depends on holder form, free angle, tolerance class, fastening method, size and thickness — confirm these parameters before production trials. For procurement or application advice on the Tungaloy T9215 grade and the CNMG120402 insert, contact Metav Werkzeuge by phone or email for tailored technical support and ordering assistance: info@metav-werkzeuge.com, +49 2822 7131930 Technical Data Article number: 6950902 Manufacturer SKU: TUN6950902 Model series: ISO turning inserts Material: carbide Grade/coating: T9215 (CVD-coated) Facts Insert shape: rhombic CNMG Size: 12 mm Thickness: 4.76 mm Corner radius: 0.2 mm Rake angle: 0° Approach angle: 80° Hole: with cylindrical hole Special features Double-sided chipbreaker ISO-standardised insert Suitable for continuous to slightly interrupted cuts Recommended for medium steel machining Compatible with standard external holders and boring bars FAQ What applications suit this insert best? This CNMG120402 T9215 insert is intended primarily for external and internal turning of medium steels and performs well under continuous to lightly interrupted cutting conditions. How does the T9215 grade affect tool life? The T9215 CVD-coated carbide offers improved wear resistance and good fracture toughness, which together extend the service life of the Tungaloy insert in medium steel machining. Is the insert reversible and how many cutting edges are available? The rhombic CNMG shape with a double-sided chipbreaker provides multiple indexed cutting edges per insert, enabling economical use of each cutting face. Which holders are compatible with this ISO insert? Compatibility is determined by holder form, clearance angle, tolerance class, fastening and insert size; the CNMG120402 fits holders designed for CNMG 120402 geometry with a matching locating feature. Can this insert handle interrupted cuts? Yes — the insert and grade combination is suitable for continuous to slightly interrupted cuts; for heavier interruptions, choose a geometry and grade adapted to greater shock loads. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120402 T9225 Wendeplatten - Tungaloy
Take advantage of the CVD-coated T9225 grade and the double-sided chipbreaker for reliable, productive turning of medium to heavy steel; benefit from stable chip control and long tool life. Order the CNMG120402 T9225 insert directly via Metav Werkzeuge or ask the consultants for application advice. CNMG120402 T9225 — CNMG ISO turning insert for robust steel machining by Tungaloy CNMG120402 T9225 is an ISO‑standard indexable insert for external and internal turning, designed as a robust universal grade for variable engagement and slightly interrupted cuts. CVD-coated carbide grade T9225 Universal for medium to heavy steel Double-sided chipbreaker for stability ISO CNMG 120402 shape with 0.2 mm radius Consistent performance under mixed cutting conditions The combination of a CVD-coated surface and a carbide substrate in grade T9225 provides a balance between wear resistance and toughness. This makes the insert particularly suitable for medium to heavy steel machining where engagement conditions change or cuts are intermittently interrupted. The coating reduces adhesive wear and supports higher cutting parameters, while the substrate maintains edge integrity under mechanical shock. For production environments, this translates into fewer insert changes and improved process continuity, helping to keep cycle times predictable. Stable chip control and extended tool life Equipped with a double-sided chipbreaker, the insert promotes controlled chip formation across a range of feeds and depths of cut. The rhombic geometry with an 80° approach angle and a 0° rake offers robust cutting stability; the small 0.2 mm corner radius improves edge strength for tough starts and interrupted cuts. For users less familiar with chipbreaker function: the chipbreaker deforms and segments the chip at the cutting edge, reducing risk of entanglement and improving evacuation, which in turn protects the workpiece surface and reduces secondary operations. Simple integration with ISO tooling systems As an ISO CNMG 120402 insert, the geometry and mounting interfaces follow international standards, enabling straightforward fitment into compatible external holders or boring bars. The insert has a 4.76 mm thickness and the plate size corresponds to the ISO 12 designation, with a cylindrical hole for positive clamping. Typical system setup comprises an ISO holder, a support shim or clamp, and the matching fastening screw. This standardisation shortens tooling planning and simplifies inventory management across multi‑machine shops. Why this grade benefits modern production The T9225 grade is formulated as a robust universal option that copes well with variable steel grades and unstable cutting conditions. Its design philosophy supports productive turning with a focus on process security and repeatable surface quality. Where operations demand a reliable compromise between life and edge stability—such as mixed batch production or workshops handling diverse steel components—this insert helps maintain throughput while reducing the frequency of tool interventions. Choose the Tungaloy CNMG120402 T9225 insert for resilient, predictable turning performance and contact Metav Werkzeuge for technical matching and procurement: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6950916 SKU: 6950916-Tungaloy Manufacturer SKU: TUN6950916 Manufacturer: Tungaloy Facts Plate size: 12 Plate thickness: 4.76 mm Corner radius: 0.2 mm Approach angle: 80° Rake (clearance) angle: 0° Special features CVD-coated carbide, grade T9225 Double-sided chipbreaker Rhombic plate form (CNMG) Cylindrical hole for clamping ISO‑standard turning indexable insert for external and internal turning Robust universal grade for medium to heavy steel machining FAQ What materials is this insert suited for? The CNMG120402 T9225 insert is intended primarily for medium to heavy steel machining and performs well under changing engagement conditions or slightly interrupted cuts. How does the chipbreaker affect machining? The double-sided chipbreaker on the insert improves chip control and evacuation, reducing the chance of chip jamming and supporting consistent surface finish. Can the insert be used for internal turning as well as external turning? Yes, the ISO CNMG geometry and standard hole make the insert compatible with suitable boring bars and external holders for both internal and external turning operations. How many cutting edges are available per insert? The insert is double-sided and indexable; edges can be rotated or flipped according to the holder and clamping method to present fresh cutting edges as required. Which holders and clamping components are required? Mounting requires a compatible ISO CNMG external holder or boring bar, plus the appropriate shim/clamp and securing screw; ensure form, clearance, tolerance class and thickness match the insert specification. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120402 T9225 Wendeplatten - Tungaloy
CNMG 120402 T9225 Wendeplatte für Drehen von Tungaloy Die CNMG 120402 T9225 ist eine ISO-genormte, rhombische Wendeplatte für robuste Außen- und Innendrehprozesse in der Stahlbearbeitung. CNMG 120402 T9225 von Tungaloy: ISO-genormt CVD-beschichtetes Hartmetall für hohe Standzeit Doppelseitiger Spanbrecher für variable Schnitte Mit zylindrischem Loch und 0° Freiwinkel Eckenradius R0,2 und Plattendicke 4,76 mm Höhere Produktivität durch robuste Universalsorte Die CNMG120402 T9225 bietet eine ausgewogene Kombination aus Zähigkeit und Verschleißfestigkeit, ideal für wechselnde Eingriffsbedingungen. Durch die CVD-Beschichtung und das speziell abgestimmte Schneidstoffgefüge reduziert sich der Werkzeugwechselbedarf, was die Produktivität steigert und Stillstandzeiten verringert. Anwender profitieren von gleichbleibender Performance bei mittleren bis schweren Schnitten und weniger Ausschuss durch konstante Schnittbedingungen. Materialeigenschaften und Beschichtungsnutzen Gefertigt aus Hartmetall mit CVD-Beschichtung, sorgt die Platte für eine stabile Schneidkante und gute Spanabfuhr. Die CVD-Technologie erzeugt eine bindige, hitzebeständige Schicht, die besonders bei abrasiven Stählen und unterbrochenen Schnitten Vorteile bringt. Zur Erklärung: Bei der CVD-Beschichtung wird eine chemische Dampfabscheidung genutzt, die eine harte Schicht auf dem Substrat bildet und dadurch die Standzeit erhöht. Einsatzempfehlung und Bearbeitungsstrategie Für Außen- und Innendrehen empfiehlt sich die Auswahl des passenden Spanbrechers entsprechend Werkstoff und Schnittbedingungen; die doppelseitige Ausführung bietet zusätzlichen Vorteil bei Umsetzen der Schneide. Der Winkel 80° und der Eckenradius R0,2 unterstützen stabile Einstech- und Schruppoperationen. Bei wechselnden Eingriffen empfiehlt sich leicht reduzierte Schnittgeschwindigkeit und angepasste Vorschubwerte, um die Zähigkeit der Sorte optimal zu nutzen. Kompatibilität, Handling und Systemhinweise Als ISO-Drehplatte ist die Kompatibilität zu Haltern über Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke definiert. Die Platte verfügt über ein zylindrisches Loch und ist doppelseitig einsetzbar, was Handhabung und Vorratseffizienz verbessert. Austauschschrauben, Unterlagen und ein geeigneter Klemmsatz sind Teil des Systemaufbaus; so wird die Wiederholgenauigkeit beim Einlegen gewährleistet. Für produktive Zerspanung empfiehlt Metav Werkzeuge die CNMG 120402 T9225 als wirtschaftliche Lösung für mittlere bis schwere Stahlbearbeitung — technische Beratung und Bestellung unter info@metav-werkzeuge.com oder telefonisch +49 2822 7131930 Produktmerkmale Artikelnummer: 6950903 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: CNMG120402 Tungaloy-Wendeplatte Daten Radius: 0,2 mm Winkel: 80° Plattendicke: 4,76 mm Plattengröße: 12 mm Eckenradius: 0,2 mm Freiwinkel: 0° Besonderheiten Schneidstofftyp: CVD-beschichtetes Hartmetall Sorte: T9225 Einsatz: Drehen Spanbrecher: doppelseitig Loch: mit Loch Lochstil: zylindrisches Loch Plattenform: rhombisch SKU Hersteller: TUN6950903 Hersteller Artikelnummer: 6950903 FAQ Was zeichnet die Sorte T9225 aus? Die Sorte T9225 von Tungaloy ist eine robuste Universalsorte auf Hartmetallbasis mit CVD-Beschichtung, ausgelegt für mittlere bis schwere Stahlbearbeitung und wechselnde Eingriffsbedingungen; sie bietet gute Zähigkeit und stabile Spanbildung. Für welche Anwendungen eignet sich die CNMG 120402 T9225 besonders? Die CNMG 120402 T9225 ist prädestiniert für Außen- und Innendrehen bei Stahlwerkstoffen, insbesondere wenn leicht unterbrochene Schnitte oder variable Schnittbedingungen vorliegen. Wie viele Schneidkanten stehen pro Platte zur Verfügung? Aufgrund der doppelseitigen Ausführung der CNMG 120402 Tungaloy-Wendeplatte stehen mehrere Nutzkanten zur Verfügung, was die Wirtschaftlichkeit durch längere Nutzungsintervalle verbessert. Welche Rolle spielt der Eckenradius R0,2? Der Eckenradius R0,2 der CNMG 120402 beeinflusst die Kantenstabilität und Oberflächengüte; kleinere Radien eignen sich für feine Konturen und gute Maßtreue bei Präzisionsdrehoperationen. Worauf ist bei der Halterkompatibilität zu achten? Die Kompatibilität ergibt sich aus Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke; für die CNMG 120402 ist ein rhombischer ISO-Halter mit entsprechendem Klemmsystem und zylindrischer Lochaufnahmenutzung erforderlich. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CNMG 120402 T9225 Wendeplatten - Tungaloy
Take advantage of a robust T9225 grade and CVD-coated cemented carbide construction combined with an 80° rhombic geometry and a double-sided chipbreaker for dependable medium-to-heavy steel turning. Order directly via Metav Werkzeuge or consult our specialists for compatibility and application advice. CNMG 120402 T9225 — Indexable insert for turning by Tungaloy The CNMG120402 T9225 is an ISO rhombic indexable insert designed for external and internal turning, optimised for medium-to-heavy steel machining and intermittent cuts. ISO rhombic 80° geometry for turning CVD-coated cemented carbide T9225 Double-sided chipbreaker with cylindrical hole 12 mm size, 4.76 mm thickness, 0.2 mm radius Consistent cutting performance where conditions vary The combination of a CVD-coated surface and cemented carbide substrate in the T9225 grade delivers a balance of toughness and wear resistance that is particularly suitable for medium-to-heavy steel machining. This composition supports reliable edge life under slightly interrupted cuts and fluctuating engagement, reducing unscheduled tool changes. The coating enhances thermal stability and abrasion resistance, so the tool keeps performance consistent across varied feeds and speeds while maintaining acceptable surface quality. Clear compatibility and secure clamping for predictable results As an ISO turning insert, the rhombic 80° geometry and the specified dimensions ensure compatibility with standard ISO holders when matching form, relief angle, tolerance class, fastening method, size and thickness. The insert is supplied double-sided, with a cylindrical hole for positive locating and repeatable seating; this allows economical use of both cutting edges and straightforward indexing. Noting the 0° clearance angle and the physical measures helps to identify the correct holder and clamping kit to achieve secure fixation and consistent tool projection. Designed to improve uptime and operational economy Selecting a robust universal grade such as T9225 supports stable chip formation and extended service intervals, which contributes directly to shop-floor productivity. The double-sided chipbreaker reduces chip control issues in a wide range of steels and cutting conditions, decreasing machine downtime and handling effort. Fewer insert changes and predictable wear behaviour translate into lower per-part tooling costs and a more efficient machining cycle, a tangible advantage for batch production and mixed-lot environments. Practical guidance for turning applications on the shop floor For external and internal turning applications, choose the chipbreaker and the insert grade according to workpiece material and rigidity of the setup. The 0.2 mm corner radius provides a good compromise between strength and edge definition for finishing and semi-finishing passes; the 12 mm size and 4.76 mm thickness are typical for robust external operations and allow for sufficient clamping surface. When mounting, verify holder compatibility with the ISO designation and confirm the double-sided chipbreaker orientation for optimum chip flow and evacuation. For application-specific advice or order placement, contact Metav Werkzeuge for a personalised consultation — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the CNMG 120402 T9225 insert and suitable holder combinations Technical data Article number: 6966059 Manufacturer SKU: TUN6966059 SKU: 6966059-Tungaloy Model series: ISO turning inserts Grade: T9225 Material: cemented carbide Dimensions / Key figures Size: 12 mm Thickness: 4.76 mm Corner radius: 0.2 mm Geometry angle: 80° Clearance angle: 0° Special features CVD coating Double-sided chipbreaker Rhombic plate form Cylindrical hole Application: turning Compatibility determined by form, clearance, tolerance, fixing, size and thickness FAQ Which turning operations is this insert intended for? The CNMG120402 T9225 indexable insert by Tungaloy is intended for external and internal turning operations, especially where medium-to-heavy steel machining and slightly interrupted cuts demand a tough, wear-resistant grade. How is holder compatibility ensured? Compatibility depends on matching the ISO geometry, the relief/freiwinkel, the tolerance class, the fixing method and the insert size/thickness; the CNMG120402 form and 80° rhombic geometry assist in selecting the correct ISO holder. What do the core specifications mean for machining? The CVD-coated cemented carbide and T9225 grade signal a balance of wear resistance and toughness suited to steels, while the 0.2 mm corner radius indicates suitability for mixed finishing and semi-finishing passes. Is the insert reversible or single-use per edge? This insert is double-sided with a cylindrical hole, allowing indexing of both cutting edges and improving economical use of the insert in production. Which SKU should be referenced when ordering or enquiring? Reference SKU 6966059-Tungaloy or Manufacturer SKU TUN6966059 when discussing the CNMG120402 T9225 Tungaloy indexable insert to ensure precise identification. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMG 120404 120404 T9215 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide durability and an ISO‑standard geometry that ensures reliable holder compatibility; the plate’s T9215 grade delivers wear resistance and fracture toughness for productive medium‑steel turning. Order the insert directly via Metav Werkzeuge or consult our advisors for application guidance. CNMG 120404-TM T9215 — ISO CNMG120404 rhombic turning insert, CVD‑coated carbide, 0.4 mm corner radius (Tungaloy) A CNMG 120404-TM T9215 indexable turning insert engineered for medium steel turning, offering high wear resistance and consistent performance in continuous to lightly interrupted cuts. CVD-coated carbide grade T9215 ISO CNMG 120404 rhombic geometry 0.4 mm corner radius for fine finish Double-sided chipbreaker with cylindrical hole Productivity with reliable wear resistance The T9215 grade is a CVD‑coated carbide designed to balance wear resistance and fracture toughness, making it particularly effective for medium steel machining. This combination allows stable cutting at elevated feed rates and supports high productivity in continuous to lightly interrupted operations. The coating reduces flank and crater wear, extending effective tool life and lowering changeover frequency, which benefits batch production and longer turning cycles. Precise ISO geometry for straightforward toolholder matching The insert follows the ISO CNMG120404 specification with a rhombic 80° included angle and 0° relief angle, which simplifies selection of the corresponding holder. Compatibility is determined by form, relief angle, tolerance class, fastening method, size and thickness; ensuring these parameters match the toolholder avoids setup errors and contributes to consistent cutting conditions. The ISO conformity aids tool management and inventory control across multiple machines. Controlled surface quality and cutting stability With a 0.4 mm corner radius, the plate offers a favourable compromise between edge strength and surface finish: small radii help achieve finer finishes while maintaining edge integrity under moderate feeds. The double‑sided chipbreaker supports predictable chip formation and evacuation, while the cylindrical central hole and 4.76 mm thickness ensure secure clamping in standard CNMG holders. Together, these features reduce vibration, improve repeatability and support efficient finishing passes. For high‑productivity turning with Tungaloy’s T9215 grade, contact Metav Werkzeuge for tailored advice or to place an order — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific steel grades and machining conditions Technical data Article number: 6772176 Manufacturer SKU: TUN6772176 SKU: 6772176-Tungaloy Label: CNMG 120404-TM T9215 Facts Corner radius: 0.4 mm Included angle: 80° Relief angle: 0° Plate thickness: 4.76 mm Plate size: 12 mm Special features Material: carbide Coating: T9215 (CVD) Plate form: rhombic, with cylindrical hole Chipbreaker: double-sided Application: turning (external and internal) Model series: ISO turning inserts FAQ What materials is this insert best suited for? The CNMG 120404-TM T9215 is optimised for medium steel machining; the T9215 CVD coating enhances wear resistance for continuous to lightly interrupted cuts. Can the insert be used for finishing passes? Yes — the 0.4 mm corner radius and the double‑sided chipbreaker facilitate improved surface quality during finishing operations while maintaining adequate edge strength. How does the ISO CNMG120404 designation affect holder selection? ISO CNMG120404 specifies the plate geometry and size; matching holder form, relief angle, tolerance class, fastening and thickness ensures secure clamping and correct cutting geometry. Is the insert suitable for interrupted cuts? The T9215 grade provides good fracture toughness and is suitable for continuous to lightly interrupted cuts; heavy interruption may require a different geometry or a tougher grade. What advantages does the CVD coating offer? The CVD coating improves resistance to flank and crater wear, reducing tool degradation at elevated cutting speeds and supporting longer effective tool life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com