32mm Screw-In Face Mill For XNEX 0403 Indexable Inserts, 5 Cutting Edges, M16 Thread, 40mm Cutting Height - Teknik Makina

Benefit from secure M16 clamping, compatibility with XNEX 0403 indexable inserts and five cutting edges for efficient material removal—ensuring consistent cycle times and simple insert changes; order directly via Metav Werkzeuge or consult our specialists for process integration.

Screw-in milling cutter VT249TM — 32 mm diameter, M16 thread by Teknik Makina

The screw-in milling cutter provides a compact, robust mounting solution for indexable inserts and is designed for versatile face and shoulder milling applications with reliable repeatability

• 32 mm diameter for stable cutting
• M16 threaded shank for secure clamping
• Compatible with XNEX 0403 indexable inserts
• Five cutting edges for efficient material removal

Improved rigidity and predictable performance on the shop floor

The compact design delivers rigidity where it matters: a 32 mm diameter body and an M16 thread create a stable connection that reduces vibration and improves tool life. This stability translates into repeatable machining results and fewer reworks. By combining a short, stiff toolholder with a 65 mm total length and a modest weight of 0.253 kg, the assembly keeps spindle loads predictable, which helps to maintain constant surface finish and dimensional accuracy across batches.

Flexible insert system that simplifies tool management

Compatibility with XNEX 0403 indexable inserts and recognised manufacturers such as SECO allows rapid adaptation between finishing and roughing operations. The cutter accepts the insert geometry designed for radial and axial engagement, enabling quick insert indexing without special adapters. The five cutting edges maximise the number of effective edges per indexable plate, reducing tooling costs per component and lowering machine downtime during insert changes. The included Torx fastener specification (M2.5x5.5, key T7) standardises clamping and simplifies inventory.

Practical handling that speeds set-up and maintenance

A defined thread height of 25 mm and cutting height of 40 mm mean the tool seats securely with consistent overhang, aiding process planners in calculating stable cutting parameters. The simple screw-in interface shortens tool changes and reduces the need for complex balancing procedures. Maintenance routines are straightforward: visual check of insert seats, torque of the Torx M2.5x5.5 screw and replacement of worn inserts restore original cutting performance quickly. These features support efficient shop workflows and reduce non-productive time.

For tailored advice on integrating the VT249TM into existing tool systems or to order through Metav Werkzeuge, contact our Emmerich-based team at +49 2822 7131930 or info@metav-werkzeuge.com for fast, expert support and reliable supply from our European stock.

Technical data

• SKU: VT249TM
• Manufacturer: Teknik Makina
• Product type: Screw-in milling cutter

Facts

• Diameter: 32 mm
• Thread: M16
• Cutting edges: 5
• Total length: 65 mm
• Cutting height: 40 mm
• Thread height: 25 mm
• Weight: 0.253 kg

Special features

• Compatible inserts: XNEX 0403
• Compatible with SECO inserts
• Torx screw: M2.5x5.5
• Torx key size: T7

FAQ

What insert type does this cutter accept?
The screw-in milling cutter VT249TM accepts XNEX 0403 indexable inserts; the system is compatible with inserts from manufacturers such as SECO and uses the standard pocket geometry for reliable seating.

Which shank and thread are used for mounting?
Mounting is via an M16 threaded shank; the defined thread height of 25 mm ensures secure clamping and consistent positioning in the toolholder.

How many cutting edges are available per cutter?
The VT249TM is specified with five cutting edges, which increases the effective number of index positions and reduces tooling cost per produced part.

What are the relevant dimensions for process planning?
Key dimensions are 32 mm diameter, 65 mm total length and 40 mm cutting height; these values help determine overhang, rigidity and suitable spindle settings.

Which fastener and key are required for insert clamping?
Insert clamping uses a Torx M2.5x5.5 screw tightened with a T7 key for secure and repeatable fixing of the inserts.

Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com