WNMG060404-FM5 WSM10S WSM10S Wendeplatten - Walter Tools

Benefit from a combination of high wear resistance and robust cutting geometry: the Tiger·tec Silver coating and WSM10S grade deliver secure chip control and consistent edge life when machining demanding materials; order the insert directly via Metav Werkzeuge or consult the technical team for application support.

WNMG060404-FM5 WSM10S indexable turning insert – Tiger·tec Silver, for stainless steel & superalloys | Walter Tools

WNMG060404-FM5 WSM10S is an indexable turning insert designed for demanding turning operations on stainless steels and heat‑resistant superalloys, offering a balance of edge stability and chip control in high‑stress machining.

• Tiger·tec Silver coated carbide grade WSM10S
• Trigon 80° insert for robust turning
• 0.4 mm corner radius for strength
• 0° negative rake for stability
• Optimised for stainless steel and superalloys

Improved productivity on tough materials

The combination of the Tiger·tec Silver coating with the WSM10S carbide grade provides a dependable solution for machining workpiece groups M and S as defined in ISO 513. The coated substrate supports stable chip formation and thermal resistance, which reduces the risk of build‑up on the cutting edge when facing stainless steels and heat‑resistant alloys. This results in longer tool life and fewer interruptions for insert changes, directly improving process throughput and lowering unit costs per component.

Geometry tuned for strength and consistency

The Trigon 80° form delivers a strong tool shape that resists breakage in interrupted cuts and heavy engagement scenarios. A 0.4 mm corner radius increases edge robustness while the 0° negative rake reinforces the cutting edge for demanding operations; both features favour roughing and semi‑finishing where mechanical stability is essential. The FM5 chipbreaker supports controlled chip evacuation, which helps maintain a consistent surface condition and reduces the likelihood of built‑up edge during continuous turning.

Application guidance and process reliability

Tolerance class M and the Tiger·tec Silver series are selected to offer process security in serial production. The insert is suitable for conventional turning setups and is especially effective in applications where heat generation and workpiece toughness require a wear‑resistant coating and a stable cutting geometry. Reference to ISO 513 clarifies material group suitability: M for rostfreie Stähle and S for superalloys and titanium. For specific cutting parameters and holder compatibility, technical data sheets or individual cutting tests are recommended to qualify the insert for a given machining task.

For tailored advice on application and tooling with Walter Tools' WNMG060404-FM5 WSM10S inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for personalised recommendations and ordering assistance.

Technical Data

• Article number: WNMG060404-FM5-WSM10S-WALTER
• Product type: Indexable turning insert (Drehwendeschneidplatte)
• Series: Tiger-tec Silver
• Grade: WSM10S
• Chipbreaker: FM5

Facts

• Size code: 06
• Thickness code: 04
• Corner radius: 0.4 mm
• Free rake angle: 0° (negative)
• Tolerance class: M

Special features

• Insert form: Trigon 80°
• Geometry execution: G
• Material application: S / M (superalloys/titanium and stainless steels)
• Coating: Tiger·tec Silver
• Optimised for secure chip formation and edge stability

FAQ

What materials is this insert best suited for?
The WNMG060404-FM5 WSM10S insert from Walter Tools is optimised for stainless steels and heat‑resistant superalloys (ISO 513 material groups M and S), offering improved wear resistance and chip control for these challenging materials.

How does the 0° negative rake affect machining?
A 0° negative rake increases the mechanical strength of the cutting edge; the WNMG060404‑FM5 WSM10S therefore provides greater robustness in heavy cutting and interrupted cuts, though cutting forces may be higher than with positive‑rake geometries.

Which operations suit the Trigon 80° form and 0.4 mm radius?
The Trigon 80° shape with a 0.4 mm corner radius is well suited to roughing and semi‑finishing where edge stability is required; the geometry helps resist chipping in high‑stress turning applications when using the Walter Tools insert.

Is the FM5 chipbreaker suitable for long continuous cuts?
Yes, the FM5 chipbreaker on this insert supports reliable chip control during continuous turning, contributing to consistent surface quality and reduced risk of chip entanglement when machining appropriate materials.

Can this insert be used in conventional tool holders?
The WNMG060404‑FM5 form is a standard indexable insert shape compatible with holders designed for WNMG inserts; verify seating and clamping specifications against the holder manufacturer’s data to ensure correct fitment.

Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany

Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only; there is no affiliation between Metav Werkzeuge and Walter Tools. The offered item is an original, factory‑new product of Walter Tools.