Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
SK-40-70L ER-32 Collet Chuck Set With Six ER-32 Collets, SK-40 Taper - Vertex
Reliable machining through precise ER‑32 clamping and a secure SK‑40‑70L taper ensures stable toolholding and reduced setup time; the compact, robust construction at 3.8 kg supports consistent results. Order the Vertex collet chuck set directly via Metav Werkzeuge or consult their product advisers for tailored integration. Collet chuck V-755 by Vertex — ER‑32 set, SK‑40‑70L taper A robust collet chuck V-755 designed for secure toolholding in milling and CNC applications, supplied as a complete ER collet set for fast, repeatable setups. ER‑32 collet compatibility for precision gripping SK‑40‑70L taper for secure spindle mounting Supplied as a complete collet chuck set Higher throughput thanks to accurate clamping The combination of ER‑32 collets and a precision-ground chuck body delivers precise clamping that reduces radial runout and minimises rework. By keeping the tool axis concentric to the spindle, machining tolerances become more reliable and cycle times more predictable. This results in tangible productivity gains for serial production and prototype runs alike, with less time spent on re-adjustment and inspection. Seamless integration with standard spindles Built for compatibility with the SK‑40‑70L spindle taper, the chuck offers straightforward mounting on machines that accept this shank form. The moderate mass of 3.8 kg contributes to rotational stability without imposing excessive spindle load, supporting steady cuts and consistent surface finish. Clear mechanical interfaces reduce installation time and simplify tool change procedures, making the assembly suitable for both workshop and small-series manufacturing environments. Robust design for dependable workshop use Supplied as a ready-to-fit set, the chuck assembly is engineered to withstand everyday shop demands while simplifying routine maintenance. The ER collet concept provides both versatility and grip security for a wide range of tool shanks, supporting repeatable clamping cycles and quick replacements. Manufactured by a recognised brand, the unit is aimed at workshops seeking dependable toolholding that integrates with existing milling infrastructure. Contact Metav Werkzeuge for availability, ordering and integration advice on the Vertex V-755 collet chuck set — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data SKU: V-755 GTIN: 4061905086885 Manufacturer: Vertex Facts Weight: 3.8 kg Set pieces: 6 eClass: 21020405 Special features Collet type: ER-32 Taper: SK-40-70L Set: yes Brand: Vertex FAQ Which spindle taper is required for mounting this chuck? The chuck requires an SK‑40‑70L taper; machines with this taper dimension are suitable for mounting the device. What type of collets are supplied with the chuck? The set is supplied with ER‑32 collets, enabling standardised clamping across a wide range of tool shank diameters. How much does the assembly weigh and why does that matter? The assembly weighs 3.8 kg; this mass contributes to rotational stability and can improve surface finish by reducing vibration during cutting. Is the V-755 suitable for high-precision finishing operations? Yes, the ER collet system and precise spindle interface make the V-755 well suited to finishing tasks where concentricity and low runout are important. Are balancing specifications provided for high-speed applications? The product data does not include explicit balancing specifications; consideration of spindle speed and application-specific balancing should be made before high-speed use. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
SK-40-70L ER-32 Collet Chuck With ER Collets Set, 11 Pieces - Vertex
The combination of a precise ER-32 clamping system and the SK-40-70L taper ensures reliable, repeatable tool holding for production environments; the included 11-piece collet assortment and the 4.2 kg mass contribute to stable running and fewer changeovers. Order the set directly via Metav Werkzeuge or consult the team for compatibility advice. V-754 Collet chuck with ER-32 collets — SK-40-70L taper, Vertex A compact V-754 collet chuck supplied as a complete ER-32 set for machining centres requiring SK-40 taper compatibility. ER-32 collet set included SK-40-70L taper compatibility 11 collets per set Weight 4.2 kg for stable operation Consistent precision for repeatable machining A well-executed clamping system reduces variation at the toolholder and improves part tolerances. The collet chuck design secures the tool with axial and radial grip, which contributes to lower vibration and consistent cutting conditions. Because the unit uses ER-32 collets, clamping concentricity is inherent to the system, supporting repeatable results across batches. The modest mass of 4.2 kg helps dampen minor spindle oscillations, thereby aiding stability without adding excessive inertia to the machine. Compatibility that simplifies tooling and setup Compatibility with the SK-40-70L taper allows straightforward integration into spindles that accept SK-40 interfaces, reducing the need for additional adapters or conversions. The ready set approach contains an assortment of collets to cover a practical range of diameters, which shortens downtime during tool changes and simplifies inventory management on the shop floor. Where programme variety and frequent tool swaps occur, a single ER collet set keeps operations lean and predictable. Ready-to-fit set to maintain production continuity Delivering the chuck as a complete set with 11 collets means common bore sizes are covered from the outset, lowering the risk of interrupted production while the correct collet is sourced. The set form factor is especially useful in workshop environments that prioritise rapid changeovers and consistent clamping quality. Supplied as a balanced system for manual mounting, the assembly reduces setup complexity and streamlines the process from installation to machining. For secure procurement and rapid delivery choose the Vertex V-754 collet chuck set via Metav Werkzeuge — contact our specialists at info@metav-werkzeuge.com or call +49 2822 7131930 for detailed compatibility guidance and order support Technical Data SKU: V-754 GTIN: 4061905085260 EClass: 21020405 Facts Weight: 4.2 kg Pieces per set: 11 Collet type: ER-32 Special features Taper interface: SK-40-70L Supplied as a complete collet set Manufacturer: Vertex FAQ What is included in the collet set? The set includes the collet chuck and an assortment of 11 ER-32 collets; the complete configuration is delivered as the Vertex V-754 collet chuck set. Which spindle taper does this chuck fit? The chuck is compatible with spindles that accept the SK-40-70L taper interface. Can this collet system cover a broad range of tool diameters? Yes, the 11-piece ER-32 assortment covers a practical range of diameters for general workshop and production use. Is the V-754 suitable for frequent tool changes? Supplied as a ready set, the V-754 reduces changeover time through its complete collet assortment and standard SK-40 taper compatibility. Does the chuck support stable running during machining? The design and mass of the unit promote stable clamping and reduced vibration, contributing to consistent running and part quality. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
SK-50 Boring and Facing Head Set M24x3.0P Three-Point - Vertex
Combine the SK-50 taper interface, secure M24x3.0 mounting and a robust 5.9 kg construction to achieve stable, repeatable face and boring operations; order the set directly via Metav Werkzeuge or consult our specialists for tailored advice. Facing and Boring Head Set VBH-113 — SK-50 taper, M24x3.0 thread (Vertex) The Facing and Boring Head Set is a heavy-duty head assembly for precision facing and boring on milling spindles with SK-50 taper, engineered to provide high rigidity and consistent centring for demanding metalworking applications. SK-50 taper collet interface M24x3.0 thread for secure mounting Robust 5.9 kg construction for stability Improved process stability through rigid construction The tooling set delivers a combination of rigidity and mass that reduces vibration during material removal, which directly improves bore tolerance and face finish. By combining a heavy head body with a SK-50 taper connection, the assembly maintains concentricity under higher cutting forces. This translates to fewer reworks and increased machine uptime in production environments where consistent dimensional accuracy is essential. Fast, reliable mounting and repeatable set-up The threaded connection with M24x3.0 pitch ensures positive, repeatable seating for the head, allowing rapid changeovers and secure clamping during operation. The interface design supports conventional collet retention practices and reduces setup variance between shifts. For workshops focusing on throughput, the mechanical simplicity of the mounting arrangement reduces potential sources of error and shortens machine downtime between jobs. Designed for demanding machining tasks and operator confidence Constructed for industrial use, the head set’s mass and geometry aid in damping chatter and delivering a predictable cutting environment across a range of cutting parameters. The assembly is suitable for tasks that prioritise surface integrity and bore cylindricity. Built by Vertex, the unit was developed to meet the expectations of precision engineers and toolroom professionals who require stable performance for both single-part prototypes and small-series production runs. Contact Metav Werkzeuge in Emmerich for specification guidance and supply of the Vertex facing and boring head set VBH-113 Technical Data SKU: VBH-113 GTIN: 4061905094187 Manufacturer: Vertex ECLASS: 21041590 Core dimensions & weights Weight: 5.9 kg Thread: M24x3.0 Collet interface: SK-50 Features & materials Suitable for face and boring operations Heavy-duty head construction Designed for industrial milling spindles FAQ What spindle taper does the head set use? The head set uses an SK-50 taper interface, allowing secure mounting in compatible machining spindles. Which thread is required for mounting the head? Mounting is via an M24x3.0 threaded connection as specified for the set VBH-113 by Vertex. Is this set suitable for high-precision finishing operations? Yes. The mass and construction of the facing and boring head set support improved damping and consistent centring, making it suitable for precision finishing and accurate bore work. Can the head set be used on different milling machines? Compatibility depends on machine spindle taper and available mounting thread; the VBH-113 is intended for spindles accepting SK-50 taper and M24x3.0 mounting. Does the product include collets or additional accessories? The technical data lists the SK-50 collet interface; any specific collets or accessory items are supplied according to the chosen configuration. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
SK-50-100L ER-32 Collet Chuck Set With 18 ER-32 Collets, SK50 Taper - Vertex
Take advantage of the combination of precise ER-32 clamping, a robust SK-50 taper interface and a complete 18-piece collet set for dependable toolholding and reduced setup time. Order the collet chuck directly via Metav Werkzeuge or consult the product specialists for integration advice. V-754B Collet chuck — collet chuck with ER-32 set, SK-50-100L taper by Vertex A high-precision V-754B collet chuck supplied as a complete ER-32 collet set for secure tool clamping on SK-50 spindle tapers, intended for machining centres and rigid toolholding applications ER-32 collet set included (18 pieces) Designed for SK-50-100L taper Complete set, ready for mounting Weight 7 kg for stable clamping Consistent precision for tighter tolerances The clamping system relies on ER-32 collets to deliver uniform radial force and improved concentricity, which helps to reduce cutting variations and achieve more consistent surface finish. As a mechanical solution for tool retention, the arrangement minimises lateral movement during machining and supports repeatable positioning. The construction of the chuck and collet set focuses on reliability and predictable performance rather than speculative claims, making it suitable where stability and repeatability matter most. Robust spindle interface for rigid machining setups Compatibility with the SK-50-100L taper provides a solid interface to the machine spindle, ensuring a rigid connection that contributes to machining stability. The assembly’s mass — approximately 7 kg — adds inertia that can help dampen vibration in demanding operations, while the taper geometry secures axial and radial loads. Where a durable, mechanical connection between spindle and toolholder is required, this configuration is a practical choice for reducing unintended tool movement and improving process control. Ready-to-use set that reduces preparation time Delivered as an 18-piece set, the package includes a range of ER-32 collets to cover common tool diameters, enabling quick tool changes and flexible setup options on the shop floor. The set approach streamlines inventory and supports faster changeovers compared with sourcing collets separately. Supplied by Vertex, the assembly is designed for efficient workshop integration and straightforward storage, contributing to a more organised and productive tooling workflow for routine CNC operations. Contact Metav Werkzeuge in Emmerich to review technical compatibility for the V-754B and to request a tailored specification or quotation from the Metav specialists Technical data Article number: V-754B GTIN: 4061905086175 Manufacturer: Vertex Weight: 7 kg Core technical numbers Pieces per set: 18 Collet type: ER-32 Taper: SK-50-100L Special features ER-32 collets included (18 pieces) Set format for immediate use Taper interface suited to SK-50 spindle systems Brand: Vertex FAQ What collet type is supplied with the set? The set is supplied with ER-32 collets; the V-754B set contains 18 ER-32 collets for a range of tool diameters. Which spindle taper does the chuck fit? The chuck is specified for the SK-50-100L taper interface and is intended for machines equipped with the corresponding SK-50 spindle taper. How many pieces are included in the set? The delivery comprises an 18-piece set of ER-32 collets as part of the V-754B package from Vertex. Is the V-754B suitable for quick tool changes? The collet set format supports faster changeovers by providing a selection of ER-32 collets for common diameters, reducing the need to source individual collets. What is the overall weight of the assembly? The assembly weight is listed as 7 kg, which contributes to a stable toolholding arrangement at the spindle interface. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
SK-50-100L ER-40 Collet Chuck Set With ER Collets, 15 Pieces - Vertex
Take advantage of the combination of robust spindle mounting, versatile ER-40 clamping and a complete 15-piece set for reliable toolholding and reduced changeover time. Order the collet chuck set directly via Metav Werkzeuge or consult our advisors for application-specific selection. V-757 Collet Chuck Set with ER-40 — SK-50-100L by Vertex The V-757 collet chuck set is a ready-to-fit clamping solution for machining centres and tool spindles that require a secure, high-precision grip with an SK-50 taper. ER-40 collet system for wide clamping range Complete 15-piece collet set included SK-50-100L taper for robust spindle mounting Durable construction, stable under high load Consistent, secure clamping for productive machining The V-757 combines a precision collet chuck design with the widely used ER-40 system to deliver repeatable clamping force and consistent concentricity in serial and single-part production. The ER-40 interface is engineered for secure grip of common tool shanks and quick tool changes, which reduces non-productive time and improves throughput. The SK-50 taper ensures a rigid connection to the spindle, helping to maintain cutting stability under varied machining conditions. This configuration supports reliable part quality and makes process planning more predictable. Ready-to-use set that shortens setup time Supplied as a 15-piece set, the assembly includes a comprehensive range of collets and the chuck body, enabling immediate deployment at the machine without supplementary ordering. Having the set at the bench reduces search time and simplifies tool inventory management, supporting lean workshop workflows. The unit’s mass (approx. 7.6 kg) contributes to stable behaviour in the spindle and can dampen minor vibration, which helps to extend tool life and preserve finish quality on precision components. Built for professional environments and long-term operation Designed for industrial clamping applications, the chuck and collets exhibit robust mechanical construction suitable for continuous use. The SK-50-100L taper and ER-40 interface are standardised interfaces that ease compatibility with existing toolholders and spindles in production environments. Maintenance consists mainly of regular cleaning and inspection for wear; this straightforward approach helps preserve clamping accuracy and reduces lifecycle costs. For workshops seeking dependable toolholding without complex maintenance regimes, the set offers a pragmatic balance of durability and simplicity. Contact Metav Werkzeuge today for application advice and to check compatibility with your spindle — Metav’s experts will recommend the optimal configuration for your machining needs and delivery proximity from Emmerich is guaranteed Technical Data Article number: V-757 GTIN: 4061905085987 Manufacturer: Vertex Facts Weight: 7.6 kg Pieces per set: 15 ECLASS: 21020405 Special features Taper: SK-50-100L Collet type: ER-40 Scope of delivery: collet chuck with ER collets (set) FAQ What materials is the chuck suitable for? The V-757 collet chuck set is intended for general toolholding in machining; suitability depends on tooling and cutting parameters rather than the chuck itself. Which collet sizes are included in the 15-piece set? The 15-piece set supplied with the V-757 contains a standard selection of ER-40 collets to cover common shank diameters for workshop use. Can the chuck be mounted directly in any SK-50 spindle? The SK-50-100L taper on the V-757 matches machines using the SK-50 standard; verify spindle specifications before mounting to ensure compatibility. How does the ER-40 system affect changeover times? The ER-40 system in this set simplifies tool changes and reduces downtime, since collet swapping is fast and does not require complex adapters. Is the set suitable for production or only for maintenance use? The design and construction of the V-757 make it suitable for continuous production use where standard ER-40 clamping and SK-50 mounting are required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
SK-50-100L ER-40 Collet Chuck Set With ER Collets, 7-Piece - Vertex
Combine secure ER‑40 clamping with an SK50 taper and a seven-piece collet set to improve machining repeatability and changeover speed. Order the V-761 directly via Metav Werkzeuge or consult the team for application advice. Spannzangenfutter V-761 — ER‑40 collet chuck with SK50 taper (100L) by Vertex The Spannzangenfutter V-761 is a precision collet chuck designed for reliable tool holding on SK50 (100L) taper spindles in industrial machining environments. ER-40 collet system for broad clamping range SK50 taper with 100L projection for deep machining Seven-piece collet set for common tool diameters Robust 8.5 kg construction for industrial use Improved machining accuracy through repeatable clamping The V-761 combines an ER‑40 collet system with an SK50 interface to deliver repeatable concentricity and reduced runout, which directly lowers scrap rates and rework. The collet design ensures uniform radial pressure, improving tool stability under load. For users converting from other collet standards, the chuck provides a familiar clamping principle while maintaining industrial tolerances. Emphasis on mechanical consistency supports higher first-pass yields and predictable process capability. Stability and reach for longer tools and deep operations With the SK50 taper and a 100L projection, the chuck offers increased reach without sacrificing spindle stability. The longer projection is engineered to handle deeper machining tasks while the mass of the assembly—8.5 kg—helps dampen vibration during heavy cuts. This combination supports higher cutting feed rates and improved surface finish in demanding operations. The taper interface is compatible with standard SK50 tooling systems, enabling straightforward integration into existing spindle setups. Ready-to-fit set that speeds up workshop workflows Supplied as a set with seven ER collets, the V-761 reduces the need for immediate accessory purchases and simplifies initial commissioning. The seven-piece configuration covers the most commonly used tool diameters, allowing quicker tool changeovers and less downtime. The set format supports efficient stock management in the tooling cupboard and facilitates predictable tooling logistics for production planning. Compatibility with standard ER‑40 collets ensures flexible replacement and long-term upkeep. For precise machining with the Vertex V-761, contact Metav Werkzeuge in Emmerich for tailored advice and prompt supply via info@metav-werkzeuge.com or phone +49 2822 7131930 Technical Data SKU: V-761 GTIN: 4061905086229 Manufacturer: Vertex Taper: SK50 (100L) Collet type: ER-40 Pieces per set: 7 Weight: 8.5 kg ECLASS: 21020405 Features and compatibility ER-40 collet system SK50 taper interface (100L projection) Seven-piece ER collet set included Suitable for industrial machining environments FAQ What collet system does the chuck use? The chuck uses the ER‑40 collet system, which is supplied as a seven-piece set with the V-761 to cover common tool diameters. Is the taper compatible with standard SK50 spindles? Yes. The V-761 is designed for the SK50 (100L) taper interface and fits standard SK50 spindle preparations. How does the V-761 improve machining results? By combining ER‑40 clamping with the SK50 taper and mass-stabilised design, the V-761 increases clamping repeatability and reduces vibration, supporting improved surface finish and dimensional accuracy. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
SK40 C-Type Taper Toolholder, C-Typ - Vertex
Take advantage of a precise SK40 taper paired with a C‑Type interface for reliable toolholding and repeatable seating; robust construction and a compact mass of approximately 1.28 kg support consistent machining results. Order the VBC‑SK40 directly via Metav Werkzeuge or consult the team for specification advice. VBC‑SK40 Cone (C‑Type) — SK40 Taper, Vertex A VBC‑SK40 cone designed as a secure, precision toolholding adaptor for SK40 spindle systems in industrial machining environments. Precision‑ground SK40 taper C‑Type secure tool interface Compatible with Vertex toolholders Robust build, approx. 1.28 kg Improve accuracy through consistent seating The VBC‑SK40 is engineered to deliver consistent concentricity between spindle and toolholder, which matters for repeatable machining tolerances. The SK40 taper geometry ensures a defined contact zone that reduces run‑out and supports accurate, high‑quality finishes. Where tight tolerances are required, a precision cone like this reduces rework and increases first‑pass yields by stabilising the cutting interface. Faster tool changes and secure clamping for uptime A C‑Type interface provides a compact and secure mechanical connection, simplifying insertion and withdrawal while maintaining axial and radial stability. This design minimises the time spent on changeovers without compromising the locking accuracy of the holder. For production lines and job shops alike, fewer interruptions translate into improved throughput and predictable setup times. Built for stable operation in workshop environments Constructed to OEM standards, the adaptor balances mass and geometry to support stable seating under cutting loads; the specified weight of 1.28 kg contributes to reliable seating without unnecessary bulk. The component is suited to common machining setups where compatibility and durability are key. Compatibility with Vertex toolholders ensures integration into existing fleets with minimal adaptation. Procurement confidence and supply reliability Sourcing through Metav Werkzeuge adds a layer of quality assurance: stock is dispatched from a European distribution hub that acts as a quality filter for the market. This supply chain approach supports dependable lead times and traceable deliveries, which is particularly valuable for maintenance schedules and production planning. Metav’s experience in precision tooling reduces procurement complexity and centralises supplier management. For advice on specifying the correct taper adaptor for a given spindle or to request a written compatibility check from Metav Werkzeuge (email info@metav-werkzeuge.com; tel. +49 2822 7131930), contact the Metav team to align the Vertex VBC‑SK40 with production requirements. Technical data SKU: VBC‑SK40 GTIN: 4061905085222 Manufacturer: Vertex Facts Taper: SK40 Type: C‑Type Weight: 1.28 kg eClass: 21029010 Special features Precision‑ground cone geometry Designed for SK40 spindles C‑Type connection interface Vertex OEM compatibility FAQ What spindle systems is this cone compatible with? The VBC‑SK40 cone is compatible with SK40 taper spindles and designed to mate with corresponding Vertex toolholders for a defined seating interface. How does the C‑Type interface affect tool changes? A C‑Type connection on the VBC‑SK40 provides a secure, compact joint that simplifies insertion and removal while maintaining axial and radial stability during operation. Is the adaptor suitable for heavy machining operations? The VBC‑SK40’s robust construction and mass (approx. 1.28 kg) support stable seating under normal cutting loads; specific process limits depend on the overall toolholder and spindle system. Can the cone improve machining accuracy? Yes, by ensuring repeatable seating and reduced run‑out, the VBC‑SK40 contributes to consistent concentricity and improved first‑pass accuracy. Which brand manufactures this taper cone? The cone is manufactured by Vertex; the VBC‑SK40 is produced to OEM quality standards and is intended for professional workshop use. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
SK40 Pull Stud with M16 Thread, ISO 7388-3 Form AF, 17mm Bore - TECWERK
Take advantage of the proven combination of ISO 7388 / II Form B compliance, SK40 taper fit and an M16 threaded interface to secure reliable drawbar engagement and repeatable tool retention. Order the TECWERK pull stud directly via Metav Werkzeuge or consult our specialists for application advice. TECWERK pull stud — ISO 7388/II Form B, SK40 with bore (M16) The TECWERK pull stud ISO 7388/II Form B is a precision retention component for SK40 spindle systems, engineered to ensure consistent drawbar clamping in CNC and machining-centre applications. ISO 7388 / II Form B standard compatibility SK40 taper for reliable spindle fit M16 thread for positive drawbar connection Central bore for drawbar/coolant access Consistent clamping through standard conformity Compliance with ISO 7388 / II and the Form B geometry guarantees interchangeability with other standard retention systems and supports reproducible clamping forces. The standardised interface reduces uncertainty at tool change, so toolholding performance is predictable and can be integrated into production planning. With the SK40 taper and M16 thread specified, the component is suited to established spindle toolholders, enabling simplified spare-part management and shorter downtimes. Secure drawbar engagement and straightforward functionality The retention stud features a central bore that permits unobstructed drawbar engagement and may be used in systems where internal coolant or lubrication paths are required. The stud’s geometry — including d1: 18.95 mm, d2: 12.95 mm and d3: 17 mm — is designed to interface precisely with mating drawbar mechanisms, so axial retention and torque transmission are maintained during heavy machining tasks. This technical layout supports stable tool retention, which is vital for repeatable machining accuracy. Precise dimensions for repeatable accuracy Key dimensions such as L1: 44.5 mm and L2: 16.4 mm define the effective length and engagement depth, helping to control stick-out and tool projection consistently across setups. The clear numerical specifications allow planners and engineers to verify compatibility with existing holders and spindles before purchase. By basing decisions on measurable values rather than estimates, workflow reliability is improved and setup variation is minimised. Practical integration into workshop workflows The compact design and standardised threading ensure this retention stud slots into conventional SK40 toolholding systems with minimal modification. As a delivery-ready industrial part, it supports inventory rationalisation for production and maintenance departments, reducing the variety of special components required. For further compatibility checks or to confirm suitability for specific machining operations, technical guidance is available from Metav Werkzeuge and its distribution channels. For procurement or technical confirmation of the TECWERK pull stud (SKU 2000832720NW) contact Metav Werkzeuge in Emmerich by phone +49 2822 7131930 or email info@metav-werkzeuge.com to secure fast supply from central stock. Technical data Article number: 2000832720NW Label: Anzugsbolzen ISO 7388/IIB SK40 m.Bohr.TECWERK Manufacturer: TECWERK Norm: ISO 7388/II Core specifications Thread: M16 Taper: SK40 d1: 18.95 mm d2: 12.95 mm d3: 17 mm d4: 7.35 mm L1: 44.5 mm L2: 16.4 mm Special features Form: B With central bore Packaging unit: 1 FAQ Which standard does this pull stud conform to? The TECWERK pull stud is manufactured to ISO 7388 / II Form B and is intended for use where that standard is specified, reference SKU 2000832720NW. Is the retention stud compatible with SK40 spindles? Yes — the component is specified for SK40 taper interfaces and uses an M16 thread for drawbar engagement, suitable for standard SK40 toolholding systems. What is the purpose of the central bore in this design? The central bore enables secure drawbar engagement and can allow internal coolant or lubrication routing where the machine’s spindle and toolholder design provide such functionality. What are the critical dimensions to check for compatibility? Key dimensions to verify are d1: 18.95 mm, d2: 12.95 mm, L1: 44.5 mm and L2: 16.4 mm; these define the engagement geometry of the TECWERK pull stud (SKU 2000832720NW). Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
SK40 Taper Cleaning Wiper Wooden Body With Leather Facing - TECWERK
Efficient maintenance with a wooden-body SK40 taper wiper that removes dust and chips while protecting the spindle taper; the leather-trimmed face ensures gentle cleaning and minimal wear. Combine simple handling and dependable construction for predictable production routines. Order the SK40 taper wiper directly via Metav Werkzeuge or consult our advisors for technical guidance. SK40 taper wiper (wooden body) by TECWERK — leather-trimmed cleaner The SK40 taper wiper (wooden body) is a compact maintenance tool designed to remove dust, chips and light contamination from steep machine tapers, ensuring consistent tool seating and spindle performance across production shifts. Wooden body with leather trim for gentle cleaning Designed for SK40 steep tapers Removes dust, chips and light contamination Simple handling for fast maintenance Maintain spindle accuracy with quick, protective cleaning Regular removal of contaminants from the machine taper prevents seating errors and excessive runout, supporting consistent toolholder alignment and repeatable machining results. The SK40 taper wiper features a wooden body with a leather-trimmed cleaning face that picks up abrasive dust and loose swarf without scratching the contact surfaces. This combination of materials offers a balance between effective debris removal and surface protection, reducing the need for time-consuming corrective adjustments and helping to keep changeover times predictable. Faster maintenance rounds through ergonomic, low-effort handling Thanks to its compact, one-piece design, this taper wiper enables quick cleaning routines at the bench or on the machine, shortening maintenance cycles and increasing productive time. An ergonomic profile and familiar handling reduce manoeuvring, while the low-maintenance wooden construction requires no special care — simply clean or replace the leather trimming as required. The straightforward function and durable build help workshops maintain throughput without introducing complex procedures. Workshop-suitable build for everyday use and reliable results The wooden body construction provides resilient handling characteristics in busy workshop environments, while the leather trim adapts to the taper geometry for consistent surface contact. Suitable specifically for SK40 steep tapers, the tool is intended for routine cleaning of dust, chips and light contamination to support reliable tool seating. Its simple, purpose-driven design aligns with standard workshop workflows, making it an unobtrusive but effective addition to maintenance kits and inspection benches. Secure dependable taper maintenance: request the TECWERK SK40 taper wiper from Metav Werkzeuge for expert advice and fast supply – info@metav-werkzeuge.com, +49 2822 7131930 Technical Data Article number: 4000832887NW Product: SK40 taper wiper, wooden body Manufacturer: TECWERK Facts Packaging unit: 1 Special features Material: wooden body with leather trim Suitable for: steep taper SK40 Application: cleaning machine tapers of dust, chips and light contamination FAQ How does the taper wiper protect the spindle taper? The leather-trimmed face of the SK40 taper wiper removes abrasive dust and swarf while the wooden backing provides a gentle support surface, helping to avoid scratches and preserving accurate seating of the toolholder. Is this tool suitable for all SK40 holders? The taper wiper is designed for steep tapers of the SK40 family and is intended for routine cleaning of machine tapers of that specification. How should the leather trim be maintained? Leather trim can be wiped clean of loose debris; replacement or renewal can be performed when the cleaning performance declines to maintain consistent results with the SK40 taper wiper. Can the tool remove heavy buildup or hardened deposits? The taper wiper is intended for dust, chips and light contamination; hardened deposits or heavy residues require suitable mechanical or chemical cleaning methods rather than this wooden leather-trimmed cleaner. Which SKU identifies this taper wiper? The product is listed under SKU 4000832887NW and supplied as a single unit per packaging. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
SK50 Taper C-Type Cone Holder - Vertex
Take advantage of a combination of precise clamping and robust design to secure consistent machining results. The taper’s SK50 interface and C-type cone ensure repeatable seating and improved axial stability; order the component directly via Metav Werkzeuge or consult the team for application advice. VBC-SK50 — Vertex SK50 taper cone, C-type toolholder A VBC-SK50 taper cone engineered for secure tool clamping in heavy-duty milling and turning operations, offering a standard SK50 mounting and C-type geometry for enhanced axial stability. Precision SK50 taper for reliable clamping C-type cone for enhanced axial stability Robust build, approx 1.3 kg weight Genuine Vertex manufacturing quality Maximise spindle performance with a standard SK50 taper The SK50 interface provides a widely adopted, standardised mounting that supports higher spindle loads and longer cutting cycles. By combining a precisely ground cone geometry with a C-type profile, this toolholder reduces micro-movements under load and improves concentricity during rotation. The result is more consistent cutting results and reduced wear on both tool and spindle. For workshops seeking measurable improvements in repeatability, this configuration translates directly into fewer part rejects and longer tool life. Easy integration and clear mechanical benefits Designed for straightforward integration into existing machine tool setups, the taper features balanced geometry that contributes to stable running at typical machining speeds. The modest mass of 1.3 kg aids in predictable dynamic behaviour without excessive inertia, while the cone form supports axial rigidity under heavy cuts. For those less familiar with tooling terms: a C-type cone refers to the cone profile that enhances axial contact area, which means the holder seats more securely in the spindle taper and resists axial displacement when facing high feed rates. Built for reliability and consistent supply Manufactured by Vertex under controlled processes, this taper cone reflects industrial expectations for durability and consistency in serial production environments. The combination of standard conformity and manufacturer quality reduces sourcing risk and simplifies procurement logistics. Metav’s role as a European supply partner further supports dependable delivery and acts as a quality filter for the marketplace, providing assurance that the component meets workshop demands for performance and availability. Choose genuine Vertex quality — contact Metav Werkzeuge in Emmerich for tailored application advice and reliable supply via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VBC-SK50 GTIN: 4061905096389 Manufacturer: Vertex Facts Weight: 1.3 kg ECLASS: 21029010 Special features Mount: SK50 Taper: C-type cone Designation: Taper (cone) FAQ What mount does this taper use? The taper uses an SK50 mount; the VBC-SK50 is designed for standard SK50 spindles and fixtures. What does C-type cone mean for performance? A C-type cone increases axial contact and improves seating stability, giving the Vertex taper greater axial rigidity under load. How heavy is the component and why does that matter? The unit is approximately 1.3 kg; this mass contributes to stable dynamic behaviour without excessive inertia during machining. Is this a genuine Vertex part and how is quality ensured? Yes, the VBC-SK50 is a Vertex-manufactured taper cone and is supplied to ensure consistent conformity and production reliability. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
SK50 Taper Cleaning Wiper Wooden Body With Leather Facing - TECWERK
Take advantage of gentle but effective maintenance with a wooden-body taper wiper featuring a leather edge that clears dust, chips and grime from steep SK50 tapers; the robust wooden construction and leather trim ensure secure cleaning without damaging contact surfaces. Order the Taper Wiper SK50 (wooden body) directly via Metav Werkzeuge or ask our consultants if needed. Taper Wiper SK50 (wooden body) – wooden body with leather trim | TECWERK Taper Wiper SK50 (wooden body) is a compact cleaning tool for removing dust, chips and grime from steep SK50 machine tapers, designed for routine workshop maintenance. Wooden body with leather edge Designed for steep SK50 tapers Removes dust, chips and grime Simple to use and durable Keeps tapers clean for reliable seating and repeatability Regular cleaning of the machine taper is a straightforward way to protect clamping accuracy and to maintain consistent seating. The Taper Wiper SK50 (wooden body) removes loose particles and residue that would otherwise prevent full contact between mating surfaces; by reducing contamination, the tool helps preserve repeatability across setups and minimises the risk of runout or misalignment. For production environments where tool changeover time matters, a quick taper wipe is a measurable step towards consistent cycle times and fewer rejects. Protects spindle faces and prevents damage during clamping A soft leather trim combined with a stable wooden body provides effective debris pick-up while being gentle on precision surfaces. The leather edge follows the taper profile to lift away swarf without scratching or abrading the seat; the wooden core gives reliable shape and handling during use. This construction supports high accuracy during clamping operations because it removes the microscopic obstructions that cause uneven seating, contributing to longer component life and fewer corrective adjustments during setup. Streamlines workshop routines with quick, low-effort maintenance As a simple maintenance implement, the taper wiper integrates into daily or shift-based checks without special tools or fixtures. Its ergonomic form and robust build mean quick access and repeated use without performance loss, which is particularly valuable in busy shops where time and reliability are essential. Incorporating the wiper into standard operating procedures reduces downtime and supports a more organised maintenance culture, improving overall workshop throughput and operational confidence. Material choice explained for dependable, low-impact cleaning The combination of a wooden body and leather trim balances firmness and gentleness: the wooden core retains shape for accurate profile contact, while leather traps particles and prevents marring. This makes the tool suitable for removing chips, dust and general grime from steep tapers such as SK50, without introducing abrasive contact. The design is focused on maintenance rather than abrasive cleaning; for heavy contamination or adhesive residues, specialised cleaning agents or methods may be required to avoid damage. Contact Metav Werkzeuge for procurement and expert advice on the TECWERK Taper Wiper SK50 (wooden body): info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 4000832888NW Product: Taper wiper Manufacturer: TECWERK Material: Wooden body with leather trim Suitable for: steep taper SK50 Packaging unit: 1 UID: 4000832888NW Facts Packaging unit: 1 Special features Body material: wood Trim material: leather Application: cleaning machine tapers from dust, chips and grime For use with steep taper SK50 Product type: taper wiper FAQ How often should steep tapers be cleaned? Routine cleaning frequency depends on machining conditions, but regular checks after heavy machining or at each tool change help maintain seating; the TECWERK Taper Wiper SK50 (wooden body) is designed for quick, repeatable cleaning of SK50 tapers. Will the leather trim scratch the taper surface? No, the leather trim on the taper wiper is chosen to trap debris without abrading contact faces; the wooden body ensures stable handling during the cleaning process. Can this tool remove embedded coolant or sticky residues? The taper wiper removes dust, chips and general grime effectively; for hardened residues or coolant films, additional cleaning agents or degreasing may be necessary prior to using the wooden wiper. Is the wiper suitable for other taper sizes besides SK50? The product is designed specifically for steep taper SK50 profiles; for other taper standards, verify profile compatibility or select a tool matched to the respective taper. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
Spannfutter mit 4 Backen, vierkant und selbstzentrierend
Technische Daten: Bezeichnung: Spannfutter VHM Genauigkeit: 0,03 mm Abmessung: 165x215x96mm - 310x380x141mm Gewicht: 13,5 kg - 62,8 kg Klemmkraft: 1620 kgf - 900 kgf Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren. Vertex, der Hersteller in einigen Worten: Seit 1978 ist VERTEX der größte Hersteller für Maschinenteile in Taiwan. Mit einer beeindruckenden Produktionsfläche von über 15000 m² ist VERTEX in der Lage, große Mengen hochwertiger Maschinenteile herzustellen, um den Bedürfnissen der Kunden gerecht zu werden. Das Unternehmen hat sich auf Forschung und Entwicklung spezialisiert und ist stets bestrebt, innovative Designs zu entwickeln. Die hohe Lagerverfügbarkeit von 98% aller Artikel stellt sicher, dass die Kunden schnell und effizient bedient werden können. VERTEX hat sich einen hervorragenden Ruf aufgebaut, indem es qualitativ hochwertige Produkte liefert und gleichzeitig erstklassigen Kundenservice bietet. VERTEX ist der vertrauenswürdige Partner für Maschinenteile in Taiwan.
Spannfutter mit 6 Backen, selbstzentrierend
Technische Daten: Bezeichnung: Spannfutter VHM Durchmesser: 112 mm bis 167 mm Gewicht: 4,2 kg bis 9,2 kg Geschwindigkeit: 1200r.p.m. Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren. Das ist der Hersteller in einigen Worten: Seit der Gründung im Jahr 1978 hat sich VERTEX als eine der führenden Marken in der Branche etabliert. Mit einer beeindruckenden Produktionsfläche von über 15000 m² verfügt VERTEX über die Kapazität, große Mengen hochwertiger Maschinenteile herzustellen, um den steigenden Anforderungen der Kunden gerecht zu werden. Durch modernste Produktionsanlagen und fortschrittliche Fertigungstechnologien gewährleistet VERTEX die Herstellung präziser und langlebiger Produkte. Die Forschung und Entwicklung nimmt bei VERTEX einen hohen Stellenwert ein. Durch kontinuierliche Investitionen in innovative Technologien und Designverbesserungen bleibt VERTEX an der Spitze der Branche. Das engagierte Team von Experten bei VERTEX entwickelt ständig neue und verbesserte Designs, um die Leistung und Effizienz von Maschinen zu steigern. Ein weiterer herausragender Aspekt bei VERTEX ist die hohe Lagerverfügbarkeit. Mit einem beeindruckenden Bestand an Artikeln sind 98% aller Produkte sofort verfügbar. Dies ermöglicht es den Kunden, ihre Produktionsausfallzeiten zu minimieren und den reibungslosen Betrieb ihrer Maschinen sicherzustellen. Als stolzer Hersteller aus Taiwan steht VERTEX für höchste Qualität, Zuverlässigkeit und Kundenzufriedenheit. Die Kunden vertrauen darauf, dass VERTEX ihre Anforderungen versteht und ihnen Maschinenteile von höchster Qualität liefert, die den anspruchsvollen Standards gerecht werden. Interessenten sind herzlich eingeladen, VERTEX zu kontaktieren und mehr über die innovativen Produkte und den erstklassigen Service des Unternehmens zu erfahren. Das Team von VERTEX freut sich darauf, die individuellen Anforderungen der Kunden zu erfüllen und sie bei der Erreichung ihrer geschäftlichen Ziele zu unterstützen.
Spannpratze SPE f.T-Nut 12mm M10x50mm RĂ–HM
komplett für stirn- und grundseitige Befestigung · für Kompaktspanner alle Größen · (Es werden 4 Stück pro Schraubstock benötigt)
Spannpratze SPE f.T-Nut 14mm M12x55mm RĂ–HM
komplett für stirn- und grundseitige Befestigung · für Kompaktspanner alle Größen · (Es werden 4 Stück pro Schraubstock benötigt)
Spannpratze SPE f.T-Nut 16mm M12x60mm RĂ–HM
komplett für stirn- und grundseitige Befestigung · für Kompaktspanner alle Größen · (Es werden 4 Stück pro Schraubstock benötigt)
Spannpratze SPE f.T-Nut 18mm M16x60mm RĂ–HM
komplett für stirn- und grundseitige Befestigung · für Kompaktspanner alle Größen · (Es werden 4 Stück pro Schraubstock benötigt)
Spannpratze SPE f.T-Nut 22mm M16x65mm RĂ–HM
komplett für stirn- und grundseitige Befestigung · für Kompaktspanner alle Größen · (Es werden 4 Stück pro Schraubstock benötigt)
Spannring fĂĽr weiche Aufsatzbacken
Technische Daten: Bezeichnung: Spannring VHM Durchmesser: 140 mm bis 380 mm Geeignet für: Spannbacke 10" oder Spannbacke 8" je nach Ausführung Gewicht: 1 kg bis 10,1 kg Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren. Das ist der Hersteller in einigen Worten: Seit der Gründung im Jahr 1978 hat sich VERTEX als eine der führenden Marken in der Branche etabliert. Mit einer beeindruckenden Produktionsfläche von über 15000 m² verfügt VERTEX über die Kapazität, große Mengen hochwertiger Maschinenteile herzustellen, um den steigenden Anforderungen der Kunden gerecht zu werden. Durch modernste Produktionsanlagen und fortschrittliche Fertigungstechnologien gewährleistet VERTEX die Herstellung präziser und langlebiger Produkte. Die Forschung und Entwicklung nimmt bei VERTEX einen hohen Stellenwert ein. Durch kontinuierliche Investitionen in innovative Technologien und Designverbesserungen bleibt VERTEX an der Spitze der Branche. Das engagierte Team von Experten bei VERTEX entwickelt ständig neue und verbesserte Designs, um die Leistung und Effizienz von Maschinen zu steigern. Ein weiterer herausragender Aspekt bei VERTEX ist die hohe Lagerverfügbarkeit. Mit einem beeindruckenden Bestand an Artikeln sind 98% aller Produkte sofort verfügbar. Dies ermöglicht es den Kunden, ihre Produktionsausfallzeiten zu minimieren und den reibungslosen Betrieb ihrer Maschinen sicherzustellen. Als stolzer Hersteller aus Taiwan steht VERTEX für höchste Qualität, Zuverlässigkeit und Kundenzufriedenheit. Die Kunden vertrauen darauf, dass VERTEX ihre Anforderungen versteht und ihnen Maschinenteile von höchster Qualität liefert, die den anspruchsvollen Standards gerecht werden. Interessenten sind herzlich eingeladen, VERTEX zu kontaktieren und mehr über die innovativen Produkte und den erstklassigen Service des Unternehmens zu erfahren. Das Team von VERTEX freut sich darauf, die individuellen Anforderungen der Kunden zu erfüllen und sie bei der Erreichung ihrer geschäftlichen Ziele zu unterstützen.
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com