Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
Schubstangenspanner 536 mit 180° Öffnungsarm
Schubstangenspanner 536 mit 180° Öffnungsarm
Schubstangenspanner Gr.25 1xSTC-IHH25+1xSTC-SET-T20 BESSEY
zum Einsatz auf Multifunktionstischen wie z.B. Festool MFT und Sortimo WorkMo mit Lochdurchmesser 20 mm und Plattenstärke von min. 19 mm bis max. 25 mm Weitere technische Eigenschaften: · Ausstattung: 1 x STC-IHH25 + 1 x STC-SET-T20
Schutzkappe Nr.6893 M10 AMF
aus ölbeständigem Neopren zum Schutz empfindlicher Werkstücke · Härte 70 Shore A · passend für Andrückschrauben Nr. 6880, 6885, 6890 und 6892 · zum Aufstecken auf Sechskantschraubenkopf ISO 272 Weitere technische Eigenschaften: · H: 17,5mm · SW: 16mm · D: 22mm · H1: 8,5mm · D1: 15mm
Schutzkappe Nr.6893 M4 AMF
aus ölbeständigem Neopren zum Schutz empfindlicher Werkstücke · Härte 70 Shore A · passend für Andrückschrauben Nr. 6880, 6885, 6890 und 6892 · zum Aufstecken auf Sechskantschraubenkopf ISO 272 Weitere technische Eigenschaften: · H: 8,5mm · SW: 7mm · D: 11mm · H1: 4,2mm · D1: 7mm
Schutzkappe Nr.6893 M5 AMF
aus ölbeständigem Neopren zum Schutz empfindlicher Werkstücke · Härte 70 Shore A · passend für Andrückschrauben Nr. 6880, 6885, 6890 und 6892 · zum Aufstecken auf Sechskantschraubenkopf ISO 272 Weitere technische Eigenschaften: · H: 10mm · SW: 8mm · D: 12,5mm · H1: 5mm · D1: 8mm
Schutzkappe Nr.6893 M6 AMF
aus ölbeständigem Neopren zum Schutz empfindlicher Werkstücke · Härte 70 Shore A · passend für Andrückschrauben Nr. 6880, 6885, 6890 und 6892 · zum Aufstecken auf Sechskantschraubenkopf ISO 272 Weitere technische Eigenschaften: · H: 12mm · SW: 10mm · D: 15mm · H1: 6mm · D1: 10mm
Schutzkappe Nr.6893 M8 AMF
aus ölbeständigem Neopren zum Schutz empfindlicher Werkstücke · Härte 70 Shore A · passend für Andrückschrauben Nr. 6880, 6885, 6890 und 6892 · zum Aufstecken auf Sechskantschraubenkopf ISO 272 Weitere technische Eigenschaften: · H: 15mm · SW: 13mm · D: 19mm · H1: 7,5mm · D1: 13mm
Schwenkbarer Spanntisch 45°
Technische Daten: Bezeichnung: Spanntisch VHM Material: FC25 Gewicht: 7,38 kg bis 85 kg Max. Belastung: 10 Kg - 6 Kg Messtisch: 132x185mm - 300x600mm Höhe: 136mm bis 95mm Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren. Das ist der Hersteller in einigen Worten: Seit 1978 ist VERTEX der größte Hersteller für Maschinenteile in Taiwan. Mit einer beeindruckenden Produktionsfläche von über 15000 m² ist VERTEX in der Lage, große Mengen hochwertiger Maschinenteile herzustellen, um den Bedürfnissen der Kunden gerecht zu werden. Das Unternehmen hat sich auf Forschung und Entwicklung spezialisiert und ist stets bestrebt, innovative Designs zu entwickeln. Die hohe Lagerverfügbarkeit von 98% aller Artikel stellt sicher, dass die Kunden schnell und effizient bedient werden können. VERTEX hat sich einen hervorragenden Ruf aufgebaut, indem es qualitativ hochwertige Produkte liefert und gleichzeitig erstklassigen Kundenservice bietet. VERTEX ist der vertrauenswürdige Partner für Maschinenteile in Taiwan.
Schwenkbarer Spanntisch für Leichtlasten
Technische Daten: Bezeichnung: Spanntisch VHM Gewicht: 14 kg bis 28 kg Messtisch: 154x176mm bis 210x224mm Fuß: 180x228mm bis 225x312mm Höhe: 105mm bis 154mm Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren. Vertex, der Hersteller in einigen Worten: Mit einer Erfahrung von über vier Jahrzehnten hat VERTEX sich als größter Hersteller für Maschinenteile in Taiwan einen Namen gemacht. Seit der Gründung im Jahr 1978 hat das Unternehmen kontinuierlich in seine Produktionskapazitäten investiert und verfügt nun über eine beeindruckende Fläche von mehr als 15000 m². VERTEX ist stolz darauf, sich auf Forschung und Entwicklung zu konzentrieren, um innovative Designs zu schaffen, die den steigenden Anforderungen der Branche gerecht werden. Darüber hinaus ist VERTEX dafür bekannt, dass 98% aller Artikel sofort ab Lager verfügbar sind. Diese hohe Lagerverfügbarkeit ermöglicht es den Kunden, ihre Produktionsausfallzeiten zu minimieren und ihre Maschinen reibungslos zu betreiben. VERTEX bleibt seiner Mission treu, qualitativ hochwertige Maschinenteile herzustellen und den Kunden einen erstklassigen Service zu bieten.
Schwenkbarer Spanntisch für Schwerlasten
Technische Daten: Bezeichnung: Spanntisch VHM Gewicht: 17,6 kg bis 83 kg Max. Belastung: 30 Kg Horizontal und 12 Kg Vertikal - 70 Kg Horizontal und 35 Kg Vertikal Messtisch: 156x150mm bis 320x298mm Fuß: 180x285mm bis 300x449mm Höhe: 115mm bis 169mm Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren. Ein paar Worte über den Hersteller: Seit der Gründung im Jahr 1978 hat sich VERTEX als eine der führenden Marken in der Branche etabliert. Mit einer beeindruckenden Produktionsfläche von über 15000 m² verfügt VERTEX über die Kapazität, große Mengen hochwertiger Maschinenteile herzustellen, um den steigenden Anforderungen der Kunden gerecht zu werden. Durch modernste Produktionsanlagen und fortschrittliche Fertigungstechnologien gewährleistet VERTEX die Herstellung präziser und langlebiger Produkte. Die Forschung und Entwicklung nimmt bei VERTEX einen hohen Stellenwert ein. Durch kontinuierliche Investitionen in innovative Technologien und Designverbesserungen bleibt VERTEX an der Spitze der Branche. Das engagierte Team von Experten bei VERTEX entwickelt ständig neue und verbesserte Designs, um die Leistung und Effizienz von Maschinen zu steigern. Ein weiterer herausragender Aspekt bei VERTEX ist die hohe Lagerverfügbarkeit. Mit einem beeindruckenden Bestand an Artikeln sind 98% aller Produkte sofort verfügbar. Dies ermöglicht es den Kunden, ihre Produktionsausfallzeiten zu minimieren und den reibungslosen Betrieb ihrer Maschinen sicherzustellen. Als stolzer Hersteller aus Taiwan steht VERTEX für höchste Qualität, Zuverlässigkeit und Kundenzufriedenheit. Die Kunden vertrauen darauf, dass VERTEX ihre Anforderungen versteht und ihnen Maschinenteile von höchster Qualität liefert, die den anspruchsvollen Standards gerecht werden. Interessenten sind herzlich eingeladen, VERTEX zu kontaktieren und mehr über die innovativen Produkte und den erstklassigen Service des Unternehmens zu erfahren. Das Team von VERTEX freut sich darauf, die individuellen Anforderungen der Kunden zu erfüllen und sie bei der Erreichung ihrer geschäftlichen Ziele zu unterstützen.
Schwenkbarer Spanntisch mit drehender Basis
Technische Daten: Bezeichnung: Spanntisch Vollhartmetall Gewicht: 36 kg bis 86 kg T-Nut: 16 mm Messtisch: 180x290mm - 360x390mm Höhe: 206mm - 255mm Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren. Vertex, der Hersteller in einigen Worten: Seit der Gründung im Jahr 1978 hat sich VERTEX als eine der führenden Marken in der Branche etabliert. Mit einer beeindruckenden Produktionsfläche von über 15000 m² verfügt VERTEX über die Kapazität, große Mengen hochwertiger Maschinenteile herzustellen, um den steigenden Anforderungen der Kunden gerecht zu werden. Durch modernste Produktionsanlagen und fortschrittliche Fertigungstechnologien gewährleistet VERTEX die Herstellung präziser und langlebiger Produkte. Die Forschung und Entwicklung nimmt bei VERTEX einen hohen Stellenwert ein. Durch kontinuierliche Investitionen in innovative Technologien und Designverbesserungen bleibt VERTEX an der Spitze der Branche. Das engagierte Team von Experten bei VERTEX entwickelt ständig neue und verbesserte Designs, um die Leistung und Effizienz von Maschinen zu steigern. Ein weiterer herausragender Aspekt bei VERTEX ist die hohe Lagerverfügbarkeit. Mit einem beeindruckenden Bestand an Artikeln sind 98% aller Produkte sofort verfügbar. Dies ermöglicht es den Kunden, ihre Produktionsausfallzeiten zu minimieren und den reibungslosen Betrieb ihrer Maschinen sicherzustellen. Als stolzer Hersteller aus Taiwan steht VERTEX für höchste Qualität, Zuverlässigkeit und Kundenzufriedenheit. Die Kunden vertrauen darauf, dass VERTEX ihre Anforderungen versteht und ihnen Maschinenteile von höchster Qualität liefert, die den anspruchsvollen Standards gerecht werden. Interessenten sind herzlich eingeladen, VERTEX zu kontaktieren und mehr über die innovativen Produkte und den erstklassigen Service des Unternehmens zu erfahren. Das Team von VERTEX freut sich darauf, die individuellen Anforderungen der Kunden zu erfüllen und sie bei der Erreichung ihrer geschäftlichen Ziele zu unterstützen.
SDS Plus 1/2”-20 Internal Thread Drill Chuck Adapter With Locking Screw, SDS Plus Compatible - TECWERK
Take advantage of a compact retrofit that converts SDS plus rotary hammers to accept any 1/2”-20 threaded drill chuck while providing a secure fit thanks to the supplied locking screw; ideal for workshops that need quick, reliable adaptation without impact use. Order the adapter directly via Metav Werkzeuge or contact the technical team for compatibility advice. TECWERK Drill chuck adapter SDS plus → 1/2”-20 with locking screw The TECWERK Drill chuck adapter SDS plus → 1/2”-20 with locking screw enables standard threaded chucks to be mounted on SDS plus drills when impact function is disabled SDS plus connection for quick tool change Fits 1/2"-20 internal thread chucks Includes locking screw for secure mounting For non-impact operation only Fast retrofit for threaded chucks boosts workshop flexibility This adapter provides a straightforward conversion from an SDS plus shank to a 1/2”-20 internal thread, enabling the use of conventional threaded drill chucks on machines designed for SDS bits. The main practical benefit is quick conversion between accessories without complex tooling changes, so workstations can switch from bit-based tasks to chuck-mounted tooling with minimal downtime. Compatibility with machines that support reverse rotation is noted in the product specification, expanding usable machine types while retaining simple mechanical operation. Secure retention and safe operation with the supplied locking screw Retention is handled by the included locking screw, which secures the adapter inside a threaded chuck and limits axial play for reliable engagement. Because the adapter is specified for non-impact operation, it should be used in rotary mode only; this reduces stress on the threaded connection and avoids premature loosening under hammer action. The combination of SDS plus fit and positive mechanical fixing gives a dependable connection for everyday drilling and accessory work where impacts are not required. Practical benefits for professionals and well-equipped hobbyists For trades and busy workshop environments, the adapter offers a pragmatic solution to extend the functionality of existing SDS plus tools without purchasing dedicated chucks for every machine. The device is compact and intended for straightforward installation, delivering compatibility with any chuck that features a 1/2”-20 internal thread. This makes the adapter an efficient part of a toolkit where adaptability, speed and straightforward mechanical reliability are valued. For retrofit needs relying on proven compatibility, order the TECWERK SDS plus to 1/2”-20 drill chuck adapter via Metav Werkzeuge and request any technical clarifications from the Metav team at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: 2000832210NW Manufacturer: TECWERK Product type: Drill chuck adapter Packaging unit: 1 Facts Connection: SDS plus Thread: 1/2”-20 internal thread Intended use: non-impact (rotary) operation Suitable for machines with reverse rotation Special features Supplied with locking screw for secure mounting Compatible with any drill chuck with 1/2”-20 internal thread Also suitable for machines with left-hand rotation Intended for insertion without impact function FAQ Can this adapter be used with hammer function on rotary hammers? No. The TECWERK drill chuck adapter (SKU 2000832210NW) is specified for use without impact; it must be operated in rotary mode only. Will the adapter fit any standard threaded drill chuck? Yes. The adapter is compatible with any chuck that has a 1/2”-20 internal thread and is supplied with a locking screw for secure mounting. Is the adapter suitable for machines with reverse rotation? Yes. The design allows use on machines that provide left-hand or reverse rotation, as noted in the product information. How is the adapter secured inside the chuck? The included locking screw secures the adapter to the chuck, reducing axial play and ensuring a reliable mechanical connection for rotary drilling. What machines are supported by the SDS plus connection? The SDS plus interface is standard on many rotary hammers and similar tools; the adapter uses the SDS plus shank to mate with those machines while providing a threaded internal interface for chucks. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
Selbstspannende Bohrfutter APU nach DIN69871A
Technische Daten: Bezeichnung: Bohrfutter VHM Norm: DIN 69871A Durchmesser: 35,6 mm bis 56,8 mm Geeignet für: Ø0,5-8mm oder Ø3-16mm je nach Ausführung Gewicht: 0,7 kg bis 3,9 kg Spannzangen Typ: SK30-APU08 - SK50-APU16 Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren. Der Hersteller: Vertex VERTEX, der größte Hersteller für Maschinenteile in Taiwan, hat seit seiner Gründung im Jahr 1978 eine führende Position in der Branche eingenommen. Mit einer beeindruckenden Produktionsfläche von über 15000 m² verfügt VERTEX über die Kapazität, große Mengen hochwertiger Maschinenteile herzustellen und den steigenden Anforderungen der Kunden gerecht zu werden. Durch kontinuierliche Investitionen in Forschung und Entwicklung bleibt VERTEX innovativ und bietet innovative Designs an. Darüber hinaus zeichnet sich VERTEX durch eine beeindruckende Lagerverfügbarkeit aus, da 98% aller Artikel sofort verfügbar sind. Als vertrauenswürdiger Hersteller mit einem Fokus auf Qualität und Kundenzufriedenheit ist VERTEX bereit, die individuellen Anforderungen der Kunden zu erfüllen und ihnen hochwertige Maschinenteile zu liefern.
Selbstzentrierender Maschinenschraubstock, wahlweise mit Drehbasis
Mechanische Schraubstöcke Der Maschinenschraubstock von Vertex mit seiner robusten Konstruktion und seinem kompakten Design sollte in keiner Werkstatt fehlen. Die kompakte Bauweise sorgt dafür, dass der Schraubstock nicht mit der Montagemaschine kollidiert. Der Kniehebelmechanismus sorgt für eine gleichmäßige Spannkraft, geschützt vor Stößen und Vibrationen. Das Quick-Set-Up-Verfahren ermöglicht es viel Zeit zu sparen dank einer einfachen und schnellen Montage.Die robuste Konstruktion aus hochwertigen Materialien gewährleistet, dass der Schraubstock weder verbiegt noch verrutscht. Technische Daten: Bezeichnung: Maschinenschraubstock Vollhartmetall Material: Gusseisen Genauigkeit: 0,01 mm Abmessung: 185x61x80mm bis 312x151x120mm Besonderheit: mit Drehbasis Gewicht: 5 kg bis 41,5 kg Klemmkraft: 1000 kgf bis 800 kgf Öffnung: 0-106 mm bis 0-90 mm Typ: Mechanisch Fuß: Ø200x22mm bis Ø316x22mm Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren. Vertex, der Hersteller in einigen Worten: Seit der Gründung im Jahr 1978 hat sich VERTEX als eine der führenden Marken in der Branche etabliert. Mit einer beeindruckenden Produktionsfläche von über 15000 m² verfügt VERTEX über die Kapazität, große Mengen hochwertiger Maschinenteile herzustellen, um den steigenden Anforderungen der Kunden gerecht zu werden. Durch modernste Produktionsanlagen und fortschrittliche Fertigungstechnologien gewährleistet VERTEX die Herstellung präziser und langlebiger Produkte. Die Forschung und Entwicklung nimmt bei VERTEX einen hohen Stellenwert ein. Durch kontinuierliche Investitionen in innovative Technologien und Designverbesserungen bleibt VERTEX an der Spitze der Branche. Das engagierte Team von Experten bei VERTEX entwickelt ständig neue und verbesserte Designs, um die Leistung und Effizienz von Maschinen zu steigern. Ein weiterer herausragender Aspekt bei VERTEX ist die hohe Lagerverfügbarkeit. Mit einem beeindruckenden Bestand an Artikeln sind 98% aller Produkte sofort verfügbar. Dies ermöglicht es den Kunden, ihre Produktionsausfallzeiten zu minimieren und den reibungslosen Betrieb ihrer Maschinen sicherzustellen. Als stolzer Hersteller aus Taiwan steht VERTEX für höchste Qualität, Zuverlässigkeit und Kundenzufriedenheit. Die Kunden vertrauen darauf, dass VERTEX ihre Anforderungen versteht und ihnen Maschinenteile von höchster Qualität liefert, die den anspruchsvollen Standards gerecht werden. Interessenten sind herzlich eingeladen, VERTEX zu kontaktieren und mehr über die innovativen Produkte und den erstklassigen Service des Unternehmens zu erfahren. Das Team von VERTEX freut sich darauf, die individuellen Anforderungen der Kunden zu erfüllen und sie bei der Erreichung ihrer geschäftlichen Ziele zu unterstützen.
Semi-Universal Teilapparat
Technische Daten: Bezeichnung: Teilapparat Vollhartmetall Durchmesser: 130 mm bis 160 mm Abmessung: 188x160x173mm bis 230x205x220mm Besonderheit: mit 5" Futter, mit 6" Futter Gewicht: 19 kg bis 42 kg Aufnahme: MT-2 - MT-3 Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren. Ein paar Worte über den Hersteller: VERTEX, der größte Hersteller für Maschinenteile in Taiwan, hat seit seiner Gründung im Jahr 1978 eine führende Position in der Branche eingenommen. Mit einer beeindruckenden Produktionsfläche von über 15000 m² verfügt VERTEX über die Kapazität, große Mengen hochwertiger Maschinenteile herzustellen und den steigenden Anforderungen der Kunden gerecht zu werden. Durch kontinuierliche Investitionen in Forschung und Entwicklung bleibt VERTEX innovativ und bietet innovative Designs an. Darüber hinaus zeichnet sich VERTEX durch eine beeindruckende Lagerverfügbarkeit aus, da 98% aller Artikel sofort verfügbar sind. Als vertrauenswürdiger Hersteller mit einem Fokus auf Qualität und Kundenzufriedenheit ist VERTEX bereit, die individuellen Anforderungen der Kunden zu erfüllen und ihnen hochwertige Maschinenteile zu liefern.
Senkrechtspanner Gr.50 BESSEY
zum Einsatz auf Multifunktionstischen wie z.B. Festool MFT und Sortimo WorkMo mit Lochdurchmesser 20 mm und Plattenstärke von min. 19 mm bis max. 25 mm Weitere technische Eigenschaften: · F1: 2,5kN · Spannweite: 40mm
Separate Spannbacken, einstellbar
Technische Daten: Bezeichnung: Spannbacken Vollhartmetall Abmessung: 100x90x200mm bis 86,5x192x86mm Gewicht: 5,8 kg bis 23 kg Klemmkraft: 1800 kgf - 900 kgf Zubehör inklusive: 2x M12x75L und 2x M12x125L - 4x M16x75L Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren. Ein paar Worte über den Hersteller: VERTEX ist seit 1978 der führende Hersteller für Maschinenteile in Taiwan. Mit einer beeindruckenden Produktionsfläche von über 15000 m² hat VERTEX die Kapazität, große Mengen hochwertiger Maschinenteile herzustellen, um den steigenden Anforderungen der Kunden gerecht zu werden. Durch einen starken Fokus auf Forschung und Entwicklung ist VERTEX bekannt für seine innovativen Designs, die die Leistung und Effizienz von Maschinen steigern. Die hohe Lagerverfügbarkeit von 98% aller Artikel ermöglicht es den Kunden, schnell und unkompliziert auf ihre Bedürfnisse zu reagieren. VERTEX legt großen Wert auf Qualität und Kundenzufriedenheit und ist bestrebt, die individuellen Anforderungen der Kunden zu erfüllen. Als vertrauenswürdiger Hersteller ist VERTEX stets bereit, seinen Kunden hochwertige Maschinenteile anzubieten und einen herausragenden Service zu gewährleisten.
Size 2 Vertical Clamp With Horizontal Foot, Max Clamping Force 1200 N, Max Pressure 800 N - AMF
Take advantage of the combination of compact design and dependable clamping performance — the horizontal base and max. clamping force 800 N ensure secure workholding in confined fixtures; order through Metav Werkzeuge or consult our specialists for application advice. AMF Vertical clamp No. 6800 — Size 2 with horizontal base The Vertical clamp No. 6800, size 2, with a horizontal base, is a compact workholding device for fixtures and jigs, designed to deliver repeatable clamping and reliable positioning in machining and assembly operations. Vertical clamp with horizontal base Size 2 for compact fixtures Max. clamping force 800 N Holding force up to 1,200 N Reliable clamping power for compact fixtures The clamp is engineered to provide consistent clamping performance in restricted spaces where conventional clamps are too large. With a max. clamping force 800 N and a rated holding force 1,200 N, the mechanism secures components during light to medium machining and assembly tasks. The design converts operator input into a stable vertical clamping action so that the part is held firmly while machining forces are applied. The compact footprint and the horizontal base make the device especially suitable for modular fixtures, single-station jigs and repeat production set-ups where space optimisation and predictable clamping behaviour are required. Clear adjustment and straightforward integration into fixtures Adjustment is simple and measurable: the clamp includes an M6 x 35 pressure screw and an adjustable range of 23–31 mm, which enables a controlled contact travel for diverse part heights. Mounting dimensions such as A, B and L1/L2 are provided for accurate integration into existing fixture plates, while the horizontal foot supports straightforward bolting and alignment. The clamp’s geometry, including a clamping angle of 105°, supports reliable engagement and repeatable positioning, which reduces set-up time and aids process stability in serial production. Low-maintenance durability for everyday shop use Built for routine use, the unit delivers predictable behaviour over many cycles and requires minimal intervention. Because clamping and holding capacities are specified, selection is simplified and process failure risk is reduced; the specified holding force 1,200 N indicates the static retention capability under operational load. The mechanical design focuses on robustness and serviceability so that maintenance is straightforward and downtime is minimised, supporting continuous production in workshops and light industrial environments. Where this clamp brings the greatest benefit The vertical clamp is well suited to assembly benches, small machining centres and dedicated jigs where a horizontal base is advantageous for mounting and alignment. Its compact size and measurable adjustment make it a practical option for fixture builders, maintenance workshops and production technicians seeking a dependable, space-saving clamping solution. Specifying this clamp helps standardise workholding across stations and simplifies spare-part inventories for small to medium-sized production runs. Contact Metav Werkzeuge for application support and availability of the AMF Vertical clamp No. 6800 (SKU 4000833502NW); specialists at Metav in Emmerich can advise on fixture integration and delivery — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000833502NW Type: 6800 Product: Vertical clamp No. 6800 size 2, horizontal base Manufacturer: AMF Execution: with horizontal base Packaging unit: 1 Numeric data Max. clamping force: 800 N Max. holding force: 1,200 N Pressure screw: M6 x 35 A: 6 mm B: 52 mm C: 20 mm D: 5.5 mm E: 25 mm F: 11 mm H: 23 mm H1: 139.5 mm HW min.: -3 mm HW max.: 4.5 mm I: 12 mm K: 6 mm L: 12.5 mm L1: 78 mm L2: 89 mm M: 23–31 mm N: 43 mm P: 32 mm a: 105° Special features Horizontal base Size 2 Adjustable clamping range 23–31 mm Clamping angle 105° Compact design for fixtures and jigs FAQ What is the clamping capacity of this vertical clamp? The AMF Vertical clamp No. 6800 (SKU 4000833502NW) provides a maximum clamping force of 800 N and a holding force rated at 1,200 N. Can the clamp accommodate different part heights? Yes, the device features an adjustable range of 23–31 mm (M = 23–31 mm) and an M6 x 35 pressure screw for fine setting of contact travel. Is the clamp suitable for compact fixture plates? The horizontal base and compact Size 2 format are designed for integration into small fixtures and jig plates where space is limited. Which mounting dimensions are relevant for fixture integration? Key dimensions such as A, B, L1 and L2 (for example A = 6 mm, B = 52 mm, L1 = 78 mm, L2 = 89 mm) are provided to ensure accurate placement and alignment in the fixture design. What angle does the clamp operate at and why does that matter? The clamp operates at a clamping angle of 105°, which supports reliable engagement and helps maintain part position under machining or assembly forces. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Size 3 Vertical Clamp Horizontal Foot With M8 x 45 Pressure Screw, 1200 N Closing Force - AMF
Take advantage of a compact design with a horizontal mounting foot and strong, verifiable forces for reliable fixture applications; the combination of 1,200 N clamping force and 2,500 N holding force supports secure, repeatable operations. Order the clamp directly via Metav Werkzeuge or consult Metav's technical advisors for integration guidance. AMF Vertical Clamp No. 6800 (Size 3) – horizontal foot, 1,200 N clamping force The Vertical clamp No. 6800 (size 3) is a compact, industrial-grade vertical clamping element with a horizontal base, designed for secure positioning and retention of workpieces in fixtures, jigs and assembly stations. Vertical clamp No. 6800, size 3 Horizontal foot for stable mounting Max clamping force 1,200 N Max holding force 2,500 N Reliable clamping performance that reduces rework The clamp delivers a clamping force of 1,200 N and a holding force of 2,500 N, values that translate into measurable stability during machining and assembly. Higher holding force reduces vibration and part movement, which in turn lowers scrap rates and rework. The forces are stated to provide objective comparability when selecting components for precision fixtures; use of a verifiable numeric specification supports predictable cycle outcomes and process planning. Stable installation thanks to the horizontal mounting foot A dedicated horizontal foot provides a low-profile mounting option that is suited to confined fixturing layouts and modular fixture plates. The size 3 format keeps the unit compact while allowing robust anchoring to plates or sub-frames, so machining centres and manual workstations benefit from a smaller footprint without sacrificing stability. The horizontal base also simplifies alignment during assembly, enabling quicker fixture set-up and more consistent part orientation. Fine adjustment and secure contact for varying workpiece heights Adjustment is realised via a pressure screw specified as M8 x 45, allowing precise contact pressure and repeatable clamping positions. The effective clamping range of 2–11 mm supports thin to moderate section workpieces, while a defined contact angle of 105° aids guided engagement under load. These characteristics enable controlled contact force distribution, making the clamp suitable where repeatability and gentle—but firm—retention are required. Integration into fixtures and faster set-up times The compact geometry and standardised fixing points allow straightforward fixture integration, reducing engineering time for bespoke sub-assemblies. Short set-up times and predictable clamping behaviour contribute directly to reduced setup time at the machine or station. Where multiple clamps are used across a production cell, consistent mechanical behaviour simplifies trial set-ups and shortens validation runs for new components. Sourcing confidence and workshop support for precision needs Metav combines a broad product range with a practical logistics base in Emmerich, so enquiries for fixture layouts or part matching are supported by decades of application experience. The availability of tested clamping elements together with local supply reliability helps workshops and production managers achieve consistent measurement and handling standards. Metav's position as a precision partner provides an added layer of assurance for procurement and operations planning. For secure, repeatable clamping in fixtures, contact Metav Werkzeuge for ordering and technical advice — info@metav-werkzeuge.com or +49 2822 7131930 — and request guidance for integrating the AMF Vertical Clamp No. 6800 (SKU 4000833503NW) into production. Technical data Article number: 4000833503NW Type: 6800 Brand: AMF Execution: horizontal foot Packaging unit: 1 Facts Max clamping force: 1,200 N Max holding force: 2,500 N Size: 3 A: 8 mm B: 79 mm C: 20 mm D: 7.5 mm E: 37 mm F: 19 mm H: 33 mm H1: 186 mm HW min: 2 mm HW max: 11 mm I: 18 mm K: 7.5 mm L1: 112 mm L2: 112 mm M: 32.5 mm N: 46 mm P: 35 mm a: 105° Special features Horizontal mounting foot for low-profile installation Pressure screw M8 x 45 Compact size suitable for fixtures and jigs Clear clamping and holding force specifications Packaging unit 1 FAQ What is the maximum clamping force of this clamp? The clamp provides a maximum clamping force of 1,200 N; the AMF Vertical Clamp No. 6800 (type 6800, SKU 4000833503NW) is specified with this force to allow objective selection for fixtures. Which workpiece thicknesses can be clamped reliably? The effective clamping range is 2–11 mm, so the unit is suited to thin to moderate section workpieces while maintaining secure contact through the M8 x 45 pressure screw. Is the horizontal foot suitable for modular fixture plates? Yes, the horizontal foot is designed for stable mounting on plates and sub-frames, facilitating modular fixture integration and consistent alignment. How does the clamp improve set-up times in production? Consistent clamping behaviour and standard fixing dimensions help reduce adjustment and validation time; using the AMF Vertical Clamp No. 6800 across a cell simplifies repeatability and shortens set-up procedures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
SK-30-60L ER-16 Collet Chuck With ER-16 Collets Set, 10 Pieces - Vertex
Efficient toolholding with true-run stability and a compact SK-30 taper interface ensures reliable machining and simplified handling; benefit from the precision of ER-16 clamping and streamlined shop workflows. Order the Vertex V-751A collet chuck set directly via Metav Werkzeuge or consult our specialists for application advice. V-751A Collet chuck (with ER-16 collets) — SK-30-60L interface, Vertex V-751A is a compact collet chuck designed for SK-30-60L taper spindles, supplied as a set with ER-16 collets for precise and repeatable toolholding in workshop and production environments ER-16 collet compatibility SK-30 taper interface Supplied as a complete collet set Compact, lightweight 1.8 kg Consistent clamping for repeatable precision The collet chuck design concentrates clamping force uniformly around the tool shank, reducing runout and improving surface finish. Featuring ER-16 compatibility, the system provides a standardised method for securing a wide range of tool diameters with minimal concentricity deviation. For production runs where repeatability matters, this configuration reduces rework and supports predictable machining tolerance. The modular nature of the chuck allows straightforward replacement of worn components without complex procedures, supporting uptime and steady throughput. Compact interface that simplifies setup and spindle load The SK-30-60L taper interface keeps the toolholder footprint small while maintaining axial and radial rigidity where it matters. At a weight of 1.8 kg, the chuck offers a lightweight option that minimises additional spindle inertia, helping to preserve balance and reduce bearing stress during high-speed operation. The compact construction shortens tool overhang and makes clamping operations easier in confined workspaces, contributing to faster set-ups and fewer balancing adjustments, which in turn supports efficient cycle times on milling and drilling equipment. Ready-to-fit set that reduces procurement complexity Delivered as a complete collet set, the chuck arrives prepared for immediate use with matching ER collets, providing a practical solution for workshops that require quick tool changes and standardised clamping across jobs. The compatibility with ER-16 collets enables flexibility across common tool shank sizes while maintaining secure retention under typical cutting forces. Backed by the Vertex manufacturing standard, the assembly is intended to integrate into existing toolholding ecosystems with minimal adaptation, helping to simplify inventory management and maintain consistent machining results. Contact Metav Werkzeuge for tailored application advice and to secure the Vertex V-751A collet chuck set; reach out via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: V-751A GTIN: 4061905086427 Manufacturer: Vertex EClass: 21020405 Facts Weight: 1.8 kg Taper: SK-30-60L Collet type: ER-16 Set: yes Pieces per set: 10 Special features Supplied with ER collets in set Compact design for reduced overhang Suitable for standardised toolholding applications FAQ What taper does the chuck fit? The chuck is designed for an SK-30-60L taper interface, enabling direct mounting on spindles specified for SK-30 tapers. Which collet type is included with the set? The set is supplied with matching ER-16 collets to provide standardised clamping across common tool shank diameters. Is the chuck suitable for precision milling operations? Yes, the Vertex V-751A collet chuck is intended for precision toolholding with reduced runout when used with appropriately prepared tool shanks. How heavy is the toolholder assembly? The assembly weighs 1.8 kg, offering a compact and lightweight option that helps to keep spindle inertia low. Can the set be integrated into existing toolholding systems? The set is configured to fit SK-30 taper spindles and ER-16 collets, facilitating integration into compatible toolholding setups. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
SK-30-60L ER-32 Collet Chuck Set With ER-32 Collets, 18-Piece - Vertex
Take advantage of a precise clamping system combined with a rigid SK-30-60L taper and a full ER-32 collet range for reliable spindle performance and reduced setup time. Order the collet chuck directly via Metav Werkzeuge or ask our consultants if needed. Collet chuck with ER collets set – Vertex, SK-30-60L taper, ER-32 A collet chuck designed for secure, concentric clamping in machining applications, supplied as a complete ER collet set suitable for SK-30-60L taper spindles Precision ER-32 clamping system Compatible with SK-30-60L taper spindles Complete ER collet range included Robust construction for repeatable performance High-precision clamping for consistent machining The ER-32 clamping system delivers consistent concentricity and repeatability essential for high-quality machining. By using collets, the clamping surface surrounds the tool shank, reducing run-out compared with single-point holders; this improves surface finish and dimensional accuracy. The design supports quick changes while maintaining clamping force, which reduces idle time at the machine. For operations that require predictable tolerances, the combination of a reliable collet interface and sturdy construction translates directly into fewer rejected parts and smoother production flow. Rigid taper connection for reliable spindle performance A secure interface to the spindle is provided by the SK-30-60L taper, which ensures axial and radial stability under load. This rigidity benefits processes that demand stable cutting conditions, such as finishing passes or high-speed milling, by reducing vibration and tool deflection. The taper design also helps with repeatable re-mounting after tool changes, keeping setup variation to a minimum. Where machine uptime and consistent results are priorities, this taper and chuck pairing supports sustained productivity and predictable machining cycles. Complete set reduces downtime and simplifies tooling logistics Supplied as a set with a full range of ER collets, the solution minimises the need to source individual clamping items and speeds up tool changeovers. Having matched collets ready for the most common shank sizes supports lean workshop organisation and reduces inventory complexity. The overall assembly remains compact and balanced, assisting in stable rotation and prolonged component life. For workshops seeking to streamline tooling management while maintaining machining quality, this all-in-one approach improves efficiency without compromising on precision. Contact Metav Werkzeuge today for technical advice and to secure the Vertex collet chuck set for SK-30-60L applications, ensuring fast delivery from our Emmerich quality hub Technical data Article number: V-754A GTIN: 4061905085697 Brand: Vertex Facts Weight: 4.2 kg Collets per set: 18 Set supplied: yes Special features Collet type: ER-32 Taper: SK-30-60L Supplied as complete ER collet set SKU: V-754A FAQ What spindle taper is required for this collet chuck? The collet chuck is designed for an SK-30-60L taper and will fit spindles with that taper specification. Which collet size does the set use and is it complete? The set uses ER-32 collets and is supplied as a complete range of ER collets for flexible clamping. Is this product suitable for precision finishing operations? Yes, the Vertex collet chuck with ER-32 collets provides the concentricity and rigidity needed for precision finishing and repeatable results. How does the clamping system affect tool run-out? Using ER collets in this collet chuck reduces run-out compared with single-contact holders, improving tolerance control and surface finish. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
SK-40-70L ER-25 Collet Chuck Set With 15 ER Collets, 3.5 kg - Vertex
Benefit from the combination of SK-40-70L taper compatibility, an ER-25 collet system and a complete 15-piece set for reliable, fast tool changes; order directly via Metav Werkzeuge or consult the team for technical clarification. Collet chuck V-762 — ER-25 set for SK-40-70L spindles by Vertex A collet chuck V-762 supplied as a ready-to-use set with ER-25 collets, designed for secure tool holding and fast changeovers in SK-40-70L taper spindles. Ready-set with ER-25 collets SK-40-70L taper compatibility 15-piece collet set included Robust construction, 3.5 kg mass Dependable clamping for consistent machining results The collet chuck uses the widely adopted ER-25 collet system to provide secure axial and radial clamping for a variety of tool shank profiles. By compressing uniformly around the tool shank, the mechanism reduces runout and maintains concentricity across repeat operations. This reliability translates into fewer reworks and steadier surface finishes, supporting efficient production processes and predictable cycle times. A ready kit that keeps workshop downtime to a minimum Supplied as a complete 15-piece set, the unit is configured for immediate use, limiting set‑up delays and simplifying inventory management. The assembly mass of 3.5 kg denotes a sturdy build that resists vibration during machining, while compatibility with SK-40-70L tapers ensures integration with standard milling spindles. Together these attributes streamline tool changes and support a smoother workflow on the shop floor. Clear compatibility and practical handling explained Compatibility is centred on the SK-40-70L spindle interface and the ER-25 collet family, which is suitable for standard metric and imperial tool shanks commonly found in general machining. The set format supplies the typical range of clamping sizes for ER-25, reducing the need for separate orders or interim adapters. For identification and ordering the item is listed as V-762, manufactured by Vertex and intended for straightforward installation and maintenance in industrial workshop environments. Choose Vertex quality and secure the V-762 collet chuck through Metav Werkzeuge — consult our specialists in Emmerich for specification support and delivery from stock Technical Data SKU: V-762 GTIN: 4061905087257 Manufacturer: Vertex Weight: 3.5 kg Taper: SK-40-70L Collet type: ER-25 Pieces per set: 15 Facts Mass: 3.5 kg Set quantity: 15 Special features ER-25 collet system Supplied as a set SK-40-70L taper compatibility FAQ What collet system is included with this chuck? The V-762 is supplied with the ER-25 collet system as a complete set, offering the standard range of ER-25 clamping sizes. Which spindle taper does the unit fit? The unit is designed for SK-40-70L taper spindles and is compatible with machines that accept this interface. How many collets are supplied in the set? The set contains 15 collets and related components as delivered with the V-762 from Vertex. Is the V-762 suitable for high-speed applications? The V-762’s robust construction and ER-25 system support stable clamping; for specific spindle speed recommendations consult Vertex or Metav Werkzeuge for machine-matched guidance. How is the product identified for ordering? Order using SKU V-762 or GTIN 4061905087257; the item is listed under Vertex products. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
SK-40-70L ER-25 Collet Chuck Set With 7 ER Collets - Vertex
Take advantage of the combination of precise clamping, easy integration with standard tool spindles and a ready-to-use set of ER collets for efficient tool changes. Order the set directly via Metav Werkzeuge or contact the consultants for integration advice. Collet chuck V-763 with ER-25 collets, SK-40 taper – Vertex A collet chuck V-763 engineered for secure, concentric workholding in milling and drilling applications, supplied as a set with ER-25 collets for flexible clamping Vertex collet chuck »V-763« with ER-25 collets Taper SK-40-70L for standard toolholders Supplied as a set including seven ER-25 collets Robust 3.2 kg construction for stable clamping Precise clamping for repeatable machining The combination of an ER collet system and a balanced chuck body delivers consistent concentricity and low runout, essential for high-precision machining. ER-25 collets are a widely used standard for small to medium tooling and provide fine radial support to the tool shank. This results in reduced vibration and improved surface finish, which increases process reliability and reduces scrap rates. Ready-to-fit set for faster tool changes Delivered as a complete set with seven ER-25 collets, the system supports quick collet swaps and straightforward organisation at the machine. The SK-40-70L taper ensures compatibility with spindles that accept SK-40 tooling interfaces, allowing straightforward integration into existing setups. The set format reduces setup time and simplifies inventory management for workshops and production cells. Stable construction and trusted manufacturer background Constructed to provide stable clamping while keeping mass moderate at 3.2 kg, the chuck offers a balance between rigidity and manageable handling during installation. Manufactured by Vertex, the product reflects established expertise in toolholding. For customers seeking consistent supply and quality assurance for precision tools, Metav Werkzeuge acts as a reliable distribution partner and quality filter for the European market Contact Metav Werkzeuge for expert advice on integrating the Vertex V-763 into existing SK-40 spindles and to confirm availability from stock in Emmerich Technical Data Article number: V-763 GTIN: 4061905087455 Manufacturer: Vertex Facts Weight: 3.2 kg Pieces per set: 7 Collet type: ER-25 Special features Taper: SK-40-70L Supplied as complete set with collets Suitable for standard tooling interfaces ECLASS: 21020405 FAQ What collet type is included in the set? The set contains ER-25 collets; the Vertex collet chuck V-763 is supplied with seven ER-25 collets for immediate use. Which spindle taper is compatible with this chuck? The chuck uses a SK-40-70L taper and is intended for spindles that accept SK-40 tooling interfaces. Is the chuck ready to fit out of the box? Yes, the Vertex V-763 is supplied as a complete set with collets and is ready for installation where a compatible SK-40 taper is available. How does the chuck affect machining accuracy? The ER-25 collet system in combination with the balanced chuck body reduces runout and vibration, improving repeatability and surface finish during machining. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
SK-40-70L ER-32 Collet Chuck Set With 18 ER-32 Collets, SK40 Taper - Vertex
Take advantage of the combination of accurate clamping, broad compatibility and kit convenience to speed up setup and boost machining consistency. Order the complete system directly via Metav Werkzeuge or contact the consultants for tailored integration advice. Collet chuck V-753 – ER-32 set, SK-40 taper (Vertex) A collet chuck V-753 supplied with an 18-piece ER-32 collet set for secure workpiece clamping on SK-40 spindles in general machining environments ER-32 collet set, 18 pieces SK-40 taper with 70L projection Solid 5.2 kg mass for stability Supplied by Vertex, SKU V-753 Consistent clamping for repeatable machining quality The ER collet system offers concentric clamping that reduces runout and improves part accuracy. Fitting an SK-40 spindle taper, this chuck integrates a complete ER-32 collet assortment, enabling fast tool-up and predictable gripping performance across a range of diameters. The clamping concept minimises radial play, which in turn reduces scrap rates and rework requirements; this is particularly beneficial in serial operations and CNC setups where process repeatability directly affects throughput. Mass and form that reduce vibration and setup time A higher mass contributes to damping during cutting, and the unit’s 5.2 kg weight supports steady performance under load without elaborate countermeasures. The compact projection indicated by 70L helps to balance accessibility and rigidity on medium-duty machines. This balance of form and mass shortens setup cycles because fixtures remain stable once tightened, translating into fewer machine stops for recalibration and a more efficient shop floor rhythm. Kit format for immediate use and flexible clamping Supplied as an 18-piece ER-32 set, the chuck arrives ready for a broad span of clamping tasks, removing the need for incremental purchases of individual collets. The set format reduces downtime between jobs, as commonly used collet sizes are available at the bench. Compatibility with standard ER-32 tooling conventions simplifies inventory management and supports a streamlined tooling strategy that benefits production planning and cost control. Proven supply chain and application support Manufactured by Vertex, the product benefits from established production standards and traceable component origins. Metav’s role as a European distributor provides an additional quality filter: central warehousing in Emmerich ensures reliable availability and pragmatic order fulfilment. This supply model is intended to democratise precision by making dependable clamping solutions accessible for workshops and industrial users alike, reinforcing operational confidence across small and large production environments. Contact Metav Werkzeuge for application-specific advice and to arrange delivery of the Vertex V-753 collet chuck; the Metav team in Emmerich can advise on integration and spare parts availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: V-753 GTIN: 4061905085246 Manufacturer: Vertex Facts Weight: 5.2 kg Pieces per set: 18 Taper/designation: SK-40-70L Special features Collet type: ER-32 Supplied as set: yes Brand: Vertex FAQ Is the chuck compatible with SK-40 spindles? The Vertex V-753 collet chuck is designed for SK-40 taper spindles and the designation SK-40-70L indicates the matching projection. What is included in the collet set? The product is supplied as an 18-piece ER-32 collet set; the set format supports a wide range of clamping diameters following ER-32 standards. Is this suitable for high-precision work? Yes, the ER collet system and the chuck’s mass contribute to reduced runout and improved clamping stability for precision machining tasks. Where can the SKU and GTIN be found for ordering? Ordering references are SKU V-753 and GTIN 4061905085246 for the Vertex collet chuck. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com