Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
450mm Precision Indexing Table 1°/5° Readout, 18mm T-Slot, 170mm Height, 2,200 kg Clamp Force - Vertex
Combining selectable 1° or 5° indexing with a large 450 x 450 mm working surface and a secure clamping capacity of 2,200 kgf, this table delivers reliable, repeatable angular set-ups for machining and inspection. Order the VIT-450-1 directly via Metav Werkzeuge or consult our specialists if configuration advice is required. VIT-450-1 Precision Indexing Table by Vertex — 450 x 450 mm, selectable 1°/5° The VIT-450-1 is a precision indexing table designed for accurate angular positioning and heavy-duty fixturing in milling, drilling and inspection applications. 450 x 450 mm rotary table surface Selectable indexing: 1° or 5° steps High clamping force: 2,200 kgf Substantial 205 kg mass for stability Precise angular control for consistent machining results The selectable 1° or 5° indexing mechanism provides clear, measurable angular steps that simplify repeatable set-ups in series production or prototype work. By offering two indexing increments, the table reduces time spent on manual alignment while maintaining a predictable process flow — a practical advantage when machining components that require multiple indexed operations. The clear stepping supports fixture designers and machinists in creating jigs with defined orientation points, improving throughput and reducing rework. Secure clamping and mass for vibration damping A clamping capacity of 2,200 kgf combined with a unit mass of 205 kg delivers a solid foundation for stable machining. The inherent mass of the assembly helps to dampen cutting vibrations and supports heavy or asymmetrical workpieces without frequent reclamping. The inclusion of a T-slot 18 mm interface on the table allows for standard clamping elements and modular fixturing, ensuring compatibility with common workshop tooling and enabling fast reconfiguration between jobs. Workshop integration and practical handling With a clear working surface of 450 x 450 mm and an overall height of 170 mm, the table integrates smoothly with milling machines and inspection benches where ample support and low profile are required. The rotary top operates both clockwise and counter-clockwise, which facilitates flexible machining strategies and simplifies orientation changes. Supplied under Vertex quality standards and available through Metav Werkzeuge — a long-standing precision partner for industry and craft — the unit is presented as a dependable component for production and measurement setups. For tailored advice, configuration support and fast delivery from Metav Werkzeuge’s quality centre in Emmerich, contact our consultants at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the Vertex VIT-450-1 and its fit for specific applications. Technical Data Article number: VIT-450-1 GTIN: 4061905089923 Manufacturer: Vertex ECLASS: 36600310 Facts Dimensions: 450 x 450 mm Height: 170 mm Weight: 205 kg Clamping force: 2,200 kgf Indexing resolution: 1° or 5° T-slot: 18 mm Accuracy: 3 Special features Table rotates clockwise and counter-clockwise Robust mass for vibration damping Suitable for milling, drilling and inspection fixtures SKU: VIT-450-1 FAQ What indexing steps are available with this table? The unit offers selectable indexing at 1° or 5°, allowing the VIT-450-1 to be set up for fine or coarse angular increments depending on the operation. How strong is the clamping on the table? Clamping strength is rated at 2,200 kgf, providing secure fixation for heavy-duty machining; the high clamping capacity complements the table’s substantial 205 kg mass. What are the table dimensions and mounting options? The working surface measures 450 x 450 mm, with T-slot 18 mm for standard clamping hardware; the overall height is 170 mm, helping to integrate the table into typical milling setups. Can the table rotate in both directions? Yes — the rotary top operates both clockwise and counter-clockwise, which supports flexible fixturing and orientation changes during complex operations. Is the table suitable for use in inspection applications? The combination of precise indexing, stable mass and secure clamping makes this Vertex indexing table well suited to both machining and inspection tasks where repeatable angular positioning is required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
450mm Precision Indexing Table 1°/5° Steps, 18mm T-Slot, 170mm Height, 2,200 Kgs Clamp Force - Vertex
Take advantage of the combination of high indexing accuracy, robust clamping and a compact 450×450 mm table to streamline setup times and machining repeatability. Order the indexing table directly via Metav Werkzeuge or consult the in-house specialists for application advice. VIT-450-5 Precision Indexing Table by Vertex — 450×450 mm, 1°/5° indexing The VIT-450-5 is a precision indexing table designed for machining and inspection tasks, providing reliable angular division and secure workholding for medium to heavy setups. High clamping force 2200 Kgs 450 × 450 mm table surface Indexing in 1° or 5° increments Robust 205 kg construction Accurate, repeatable indexing for precision workflows The VIT-450-5 is engineered to deliver consistent precision across repeated operations. With selectable 1°/5° indexing, the unit enables fine angular subdivision for multi-axis or fixture-based work, reducing the need for secondary adjustments. The device is specified to accuracy class 3, which indicates controlled deviation limits suitable for tight-tolerance tasks; this technical assurance supports process reliability and reduces inspection rework. Clear mechanical indexing reduces cycle variability and shortens setup time in production environments where repeatability is essential. Secure clamping and heavy-duty stability for machining operations A clamping force of 2200 Kgs ensures fixtures remain stable under cutting loads, while the substantial base mass of 205 kg dampens vibration and improves surface finish. The generous 450×450 mm table area accommodates larger jigs and multiple workpieces, and the integrated T-slot 18 mm supports a wide range of clamping elements and tooling plates. These characteristics translate into safer, more efficient machining processes and lower tool wear through reduced micro-movement during cutting. Practical integration and flexible handling in the workshop The rotary table rotates clockwise and counter-clockwise, allowing toolpaths and inspection routines to be executed without repositioning the workpiece. A compact vertical profile with a 170 mm height facilitates integration into inspection benches and machining centre pallets. The design supports common mounting schemes and makes it straightforward to retrofit into existing fixtures. For purchasers seeking dependable supply and technical competence, Metav Werkzeuge acts as a quality filter for the European market, combining broad product availability with application knowledge. Select the Vertex VIT-450-5 for reliable, high-precision indexing—contact Metav Werkzeuge for tailored application advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: VIT-450-5 GTIN: 4061905091445 Manufacturer: Vertex Facts Table size: 450 × 450 mm Height: 170 mm Weight: 205 kg Clamping force: 2200 Kgs Accuracy class: 3 Indexing steps: 1° or 5° Special features Rotates clockwise and counter-clockwise T-slot: 18 mm FAQ What indexing increments are available? The VIT-450-5 offers selectable 1° or 5° indexing to suit fine or coarser angular division requirements. Is the table suitable for heavy machining operations? Yes, the unit’s 2200 Kgs clamping force and 205 kg construction make the VIT-450-5 appropriate for medium to heavy machining loads. How is the workpiece secured to the table? Workpieces are secured using the T-slot 18 mm system combined with the table’s high clamping force for stable fixturing. Can the table be used for inspection as well as machining? The precision indexing and compact 170 mm profile allow the VIT-450-5 to be integrated into inspection benches and measurement setups. What accuracy can be expected during repeated indexing? The device is specified as accuracy class 3, ensuring repeatable angular positioning within defined tolerance bands. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
450x500mm Machine Guard Expandable Front Mount, Lightweight Panel - Vertex
Take advantage of a compact, expandable solution that combines a small footprint and lightweight design to protect machines and operators while keeping retrofits simple; order directly via Metav Werkzeuge or consult the team for integration advice. VGC-4550F expandable machine guard – compact 450 x 500 mm, Vertex The VGC-4550F is an expandable machine guard designed to provide targeted protection for production cells and workshop machinery while allowing straightforward adaptation to changing layouts. Compact 450 x 500 mm footprint Lightweight at 0.7 kg for easy handling Expandable modular design for retrofit Front caliper mounting compatible Built for compact production environments The machine guard focuses on space-efficient protection: with a 450 x 500 mm footprint and a lightweight construction, it minimises occupied floor and machine space while easing handling during installation or repositioning. The reduced mass lowers manual handling effort and speeds up adjustments during line changes, which supports quicker changeovers and contributes to higher overall equipment availability. Modular expansion keeps processes flexible An expandable design enables phased integration into existing cells without major rework. The modular concept allows additional panels or extensions to be fitted as process requirements evolve, so the protective envelope can be enlarged to match new tools or fixtures. Compatibility with front-side tool mounting ensures that precision measuring devices such as calipers can be incorporated without compromising access or visibility. Practical benefits for safety and operational continuity By shielding moving parts and delineating hazardous zones, the guard helps to reduce the risk of accidental contact and unplanned downtime. The durable, service-friendly concept is intended to support routine maintenance rather than impede it: access points are designed so that inspection and minor adjustments can be completed quickly, reducing lost production time. The result is a pragmatic balance between operator protection and uninterrupted workflow. Straightforward integration into workshop layouts The unit is conceived for easy attachment to machine frames or mounting brackets commonly found in production environments; its compact size makes it suitable for retrofits where space is limited. The construction supports visible mounting of measuring tools on the front face, maintaining measurement accessibility while preserving the protective function. Supply chain reliability and spare-part access are facilitated by working with established manufacturers and authorised distributors. For retrofit projects and layout planning, specify the expandable Vertex VGC-4550F with Metav Werkzeuge to ensure correct sizing and compatibility — contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: VGC-4550F GTIN: 4061905089879 Manufacturer: Vertex Facts Dimensions: 450 x 500 mm Weight: 0.7 kg eClass: 24322502 Special features Type: Machine guard Expandable Caliper mounting: front side FAQ How is the VGC-4550F mounted to existing machines? The VGC-4550F is designed for attachment to machine frames or fixtures using conventional fasteners; exact mounting hardware depends on the machine and chosen mounting method. Can the guard accommodate calipers and other measuring tools? Yes, the design supports front-facing caliper mounting so measurement devices can be fitted without obstructing the protective function. Is the system suitable for retrofit projects in confined spaces? The expandable, modular layout of the guard makes it well suited to retrofits and tight workshop environments where phased installation is required. What are the main handling characteristics to consider during installation? With a compact footprint and a weight of 0.7 kg, the unit is easy to position and adjust, reducing installation time and manual effort. Who manufactures the machine guard? The guard is manufactured by Vertex Machinery Works Co., Ltd.; the VGC-4550F is part of their range of machine protection solutions. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
450x850mm Machine Guard Expandable, Rubber - Vertex
Take advantage of the combination of durable rubber, an expandable design and a compact footprint for consistent machine protection and flexible integration. Order the accessory directly via Metav Werkzeuge or contact our consultants for tailored advice. VGC-4585B Machine Guard by Vertex — Expandable Rubber Protection, 450 x 850 mm The VGC-4585B Machine Guard is an expandable rubber protection element designed to shield machine openings and sensitive components in workshop and production environments. *Expandable protection for varied machine sizes Durable rubber construction resists wear Compact footprint 450 x 850 mm Lightweight: 1.1 kg for easy handling Robust protection with adaptable fit The VGC-4585B combines rubber resilience with an expandable design to provide reliable protection where fixed guards cannot adapt. The elastomeric material absorbs impacts and limits ingress of chips and coolant, reducing downtime caused by contamination. For production lines that change over frequently, the adaptable geometry preserves machine accessibility while maintaining a protected barrier, supporting uninterrupted workflows and consistent part quality. Simple handling and fast shop-floor integration With a compact footprint (450 x 850 mm) and a lightweight construction at 1.1 kg, the guard is straightforward to position and reconfigure across different machines. The slim profile saves space on machine perimeters and facilitates access for maintenance operations. Compatibility for caliper placement on the rear side is provided, enabling organised tool placement without compromising protection. These attributes reduce installation time and simplify process adjustments on the shop floor. Built for precision environments and long service life Engineered for industrial use, the guard’s durable rubber resists routine wear and supports low-maintenance operation. In precision workshops and small-batch manufacturing, reliable protection helps to preserve sensitive components and measuring instruments, contributing to consistent measurement results and fewer service interventions. As part of the Vertex product range, the unit aligns with expectations for robust, purpose-designed accessories that help maintain efficiency and reduce unexpected stoppages. Order the Vertex VGC-4585B through Metav Werkzeuge for reliable, expandable machine protection — Metav Werkzeuge in Emmerich acts as a quality filter for the European market and can be contacted for product advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: VGC-4585B GTIN: 4061905091087 Manufacturer: Vertex Facts Dimensions: 450x850mm Weight: 1.1 kg Special features Material: Rubber Expandable design Suitable for caliper on rear side eClass: 24322502 FAQ Is this guard suitable for changing machine sizes? The VGC-4585B features an expandable design that adapts to varied machine openings, making it suitable where different configurations are used. What material is used and how does it affect durability? Constructed from rubber, the guard offers impact absorption and wear resistance; the material selection supports long service life in workshop conditions. Can the guard be mounted where measuring tools are stored? Yes — the design allows for caliper placement on the rear side while maintaining protective coverage around the machine opening. Will the guard interfere with regular maintenance access? The compact footprint and lightweight build allow quick repositioning, enabling maintenance access without extensive removal procedures. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
45mm Closing Clamp Horizontal Foot 1,000 N Thrust, 1,500 N Hold - Kukamet
Take advantage of a robust stainless‑steel toggle latch that combines high holding capacity with simple installation; the built‑in hook and horizontal foot ensure secure, repeatable fastening in jigs, fixtures and enclosures. Order directly via Metav Werkzeuge or consult the team for specification support. 351 toggle latch — stainless‑steel closure clamp with hook by Kukamet The 351 toggle latch is a stainless‑steel closure clamp with a hook and horizontal foot, designed for secure, repeatable fastening in industrial fixtures and equipment. Stainless‑steel construction for corrosion resistance Hook-equipped for positive locking engagement Horizontal foot for straightforward mounting 1000 N closing force and 1500 N holding force Secure, repeatable fastening for production use Built from stainless steel, this latch delivers dependable corrosion resistance while remaining suitable for demanding workshop environments. The combination of a hook mechanism and a horizontal base produces a positive mechanical engagement that resists vibration and shock, translating into fewer process interruptions. The measurable 1000 N closing force and 1500 N holding force provide quantifiable performance data for layout planners and quality engineers, supporting risk‑based decisions in assembly and fixture design. Quick installation and straightforward adjustment The horizontal mounting foot and standardised thread length of 45 mm simplify integration into existing fixtures and plates. The threaded connection enables fine adjustment of clamp engagement without disassembly, which reduces machine downtime during setup. As a compact component with a mass of just 0.135 kg, the latch adds minimal weight to assemblies while enabling a high degree of positional accuracy when aligning mating parts. Designed for practical workshop handling and maintenance Operation is intuitive thanks to the lever action: fast locking and unlocking accelerates repetitive tasks while maintaining safety through the positive hook engagement. Accessibility for inspection and routine maintenance is improved by the simple geometry; parts are easy to visually check and replace if required. The latch’s material choice and construction reduce the need for frequent replacement, supporting a lower total cost of ownership through durability and predictable life cycles. Benefits for engineers and procurement teams Specification is simplified by clear technical values and common mounting conventions. The latch offers a compact solution where secure closure and easy handling are priorities, for example in tool fixtures, transport boxes and machine covers. Selecting this clamp supports standardisation across production cells and contributes to consistent assembly quality owing to its measured holding characteristics and repeatable mechanical behaviour. For specification advice or assistance with integration, contact Metav Werkzeuge — their specialists can confirm suitability for specific fixtures and provide supply options from Emmerich to the workshop. Technical Data SKU: S351-1 GTIN: 8680731504132 eClass: 21041718 Brand: Kukamet Core specifications Weight: 0.135 kg Thread length: 45 mm Maximum closing force: 1000 N Maximum holding force: 1500 N Features and materials Material: stainless steel Mounting: horizontal foot With hook for positive locking Category: toggle latch / closure clamp FAQ What materials is the latch made from? The latch is manufactured from stainless steel, giving the 351 toggle latch good corrosion resistance for workshop and industrial environments. What loads can the latch handle? Maximum closing force is specified at 1000 N and maximum holding force at 1500 N for the 351 closure clamp (SKU S351-1). How is the latch mounted? The component uses a horizontal foot for mounting and a threaded connection with a 45 mm thread length for adjustment and fixation. Is the latch suitable for vibration-prone applications? Yes, the hook-equipped design of the 351 toggle latch provides positive engagement that resists loosening under vibration. Can the latch be adjusted without disassembly? Adjustment is possible via the threaded link, allowing fine tuning of engagement without removing the latch from the assembly. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
45mm Closure Clamp Vertical Foot With Hook, 1000N Closing Force, 1.5kN Holding Force, Blackened - Kukamet
Robust clamping performance combined with compact, corrosion-resistant construction ensures reliable fixture hold and simple integration into workshop jigs. Benefit from up to 1,500 N holding force and a 1,000 N clamping force for repeatable results. Order the lever clamp directly via Metav Werkzeuge or ask our consultants if needed. 312 Lever Clamp — vertical-foot design with hook, by Kukamet A 312 lever clamp engineered for secure workholding across metalworking and general workshop fixtures, featuring a vertical foot and integrated hook for flexible mounting and quick operation Vertical foot for stable mounting Hook-equipped for diverse clamping setups Up to 1,500 N holding force Black blued finish for corrosion resistance Consistent, measurable clamping for higher throughput The clamp delivers defined clamping force and holding force, rated at 1,000 N and 1,500 N respectively, which reduces variability during machining and assembly operations. Defined forces make process planning easier: cycle times and feed rates can be set with greater confidence because the workpiece is held consistently. For teams focused on efficiency, the quantifiable performance of this device supports faster set-ups and fewer stoppages due to slipped or shifted parts. The precise numbers shown are directly relevant to production engineers specifying fixtures for repeatable batches. Compact construction that resists workshop wear A compact, black blued finish protects the metal surface while keeping the overall mass low at 0.135 kg, permitting use in space-constrained jigs and lightweight fixtures. The vertical-foot mounting gives a low profile and direct load path into the fixture plate, reducing lever-induced moments that can deform small components. The finish provides corrosion resistance in humid or coolant-exposed environments, extending service life and reducing maintenance frequency. These design choices combine to offer a durable component that integrates into daily workshop routines without adding bulk. Flexible mounting and rapid operation for varied tasks Equipped with an integrated hook, the clamp supports alternative latching arrangements and quick-release set-ups, making it suitable for both one-off benches and repetitive production. The 45 mm thread length allows for adjustability when compensating for varying workpiece heights or locating spacers, while the vertical foot ensures secure anchorage to the fixture plate. This adaptability shortens fixture iteration time and enables the same clamp to be re-used across different assemblies, lowering inventory complexity and improving operational agility. Straightforward procurement and traceability for production use Identified by SKU B312-1 and GTIN, the clamp is suitable for inclusion in standard parts lists and ERP systems, simplifying stock control and reordering. The compact specification and clear numerical performance data make it simple to compare with alternative clamps when defining tooling kits. Supplied by a known manufacturer, the component supports consistent replacement cycles and predictable supply. For procurement teams, the clear technical data and small footprint mean fewer variants stored on the shop floor and streamlined toolroom management. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet 312 lever clamp into fixtures and for prompt supply from Emmerich—technical consultants are available at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: B312-1 GTIN: 8680731508307 Model: 312 Brand: Kukamet eClass: 21041718 ETIM: EC011973 Core measurements Weight: 0.135 kg Maximum clamping force: 1,000 N Maximum holding force: 1,500 N Thread length: 45 mm Materials & features Finish: black blued Mounting type: vertical foot Hook: yes Special features: none FAQ What clamping and holding forces does this clamp provide? The Kukamet 312 lever clamp specifies a clamping force of 1,000 N and a holding force of 1,500 N, values intended to support repeatable workholding in fixture applications. Can the clamp be mounted on standard fixture plates? Yes, the vertical foot design allows secure attachment to fixture plates; the 45 mm thread length gives room for adjustment when compensating for different workpiece heights. Is the finish suited to coolant-exposed environments? The black blued finish on the clamp offers improved surface protection and helps resist corrosion in typical workshop conditions. Which SKU should be ordered for stock replenishment? Order using SKU B312-1 (GTIN 8680731508307) to ensure the correct Kukamet lever clamp variant is supplied. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
45mm Drill Holder E1 DIN 69871 Form AD/B With Central Coolant And Reclosable Channels, SK40 70mm - TECWERK
Take advantage of a combination of precise mounting, reliable coolant management and DIN conformity for consistent drilling performance. The holder’s 25 mm clamping diameter, steep taper to DIN 69871 Form AD/B and central coolant feed support stable tool life and repeatable results; order directly via Metav Werkzeuge or consult the technical team for application alignment. Drill holder E1 (DIN 69871 AD/B) — SK40, central coolant A Drill holder E1 (DIN 69871 AD/B) designed for indexable insert drills with a cylindrical shank and lateral drive flat, suitable for SK40 spindles and applications requiring central coolant. Steep taper DIN 69871 Form AD/B Central coolant supply Re-sealable coolant channels at collar For indexable insert drills, DIN 1835-B shank Precision seating and process compatibility for indexable drilling The holder delivers precise mechanical interface by combining a steep taper conforming to DIN 69871 Form AD/B with a defined clamping arrangement for insert-style drills. With an outer diameter of 45 mm and a 25 mm clamping diameter, the assembly ensures consistent concentricity when accepting tools with a cylindrical shank and lateral drive flat to DIN 1835-B. Bore tolerance H4 at the mounting bore reduces radial play and helps to maintain low runout over repeated tool changes. This mechanical stability translates into predictable hole quality and less scrap in production environments where repeatability matters. Directed coolant and sealed channels for longer insert life Optimised fluid supply is provided through a central coolant supply that feeds cutting edges directly, while re-sealable coolant channels at the collar permit secure routing and leak-free operation when the holder is mounted. Concentrated coolant flow lowers cutting temperature and supports improved chip evacuation for indexable drilling processes. The result is reduced thermal load on inserts and potential for extended tool life, which benefits cycle-time stability and lowers downtime for frequent insert changes. Robust mounting and straightforward integration into CNC spindles Mounting on SK40 spindles is supported by the standard taper and defined dimensions (projection A: 70 mm, outer diameter D: 45 mm), facilitating easy integration into existing tooling systems. The Drill holder E1 is manufactured to maintain positional accuracy under operating loads, helping to stabilise drilling forces and maintain hole tolerance. For workshops and production lines aiming to centralise their tooling supply, the holder’s adherence to DIN standards simplifies procurement and reduces compatibility checks across different machines. Contact Metav Werkzeuge for detailed application advice or to arrange delivery of the TECWERK drill holder E1 (SKU 2000833053NW) and confirm suitability for a specific machine setup Technical Data Article number: 2000833053NW Form: E1 Standard: DIN 69871 Form AD/B Product type: Drill holder Brand: TECWERK Core data Clamping diameter: 25 mm Outer diameter D: 45 mm Projection A: 70 mm Bore tolerance: H4 Mounting taper: SK40 Special features Central coolant supply Re-sealable coolant channels at collar For indexable insert drills with cylindrical shank and lateral drive flat to DIN 1835-B Suitable for Wendeplattenbohrer (indexable insert drills) FAQ Is this holder compatible with indexable insert drills? The Drill holder E1 by TECWERK (SKU 2000833053NW) is designed specifically to accept indexable insert drills with a cylindrical shank and lateral drive flat in accordance with DIN 1835-B. How does the coolant system work on this holder? Coolant is fed via the central coolant supply and routed through re-sealable channels at the collar, providing directed flow to the cutting edge to aid cooling and chip control for the TECWERK drill holder. Can this be mounted in an SK40 spindle? Yes, the steep taper conforms to DIN 69871 Form AD/B and the holder is intended for SK40 mounting, ensuring compatibility with standard SK40 spindles. What are the key dimensional tolerances to expect? Key dimensions include a clamping diameter of 25 mm, projection A of 70 mm and outer diameter D of 45 mm; the mounting bore is produced to bore tolerance H4 to maintain concentricity. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
45mm Face Clamp Holder Weldon Shank DIN 69871 Form AD, 20mm Clamping Diameter / A35mm - TECWERK
Take advantage of a secure Weldon drive and the repeatable seating of the DIN 69871 Form AD taper to keep tool changes quick and spindle runout low; with a 20 mm clamping bore and H4 tolerance the holder supports precise, reliable machining. Order the holder directly via Metav Werkzeuge or ask their consultants if additional technical matching is required. TECWERK Weldon toolholder — DIN 69871 Form AD, SK40, clamping Ø 20 mm TECWERK Weldon toolholder DIN 69871 Form AD is a SK40 steep-taper toolholder for use with tools having a cylindrical shank and a lateral drive flat, intended for secure mounting in milling and drilling spindles Weldon lateral drive flat for secure torque transfer Steep taper to DIN 69871 Form AD, SK40 Clamping bore Ø 20 mm, tolerance H4 Reliable taper interface for consistent spindle performance The steep taper specified as DIN 69871 Form AD with an SK40 connection provides a stable, concentric interface between spindle and holder. This geometry reduces radial runout and contributes to predictable tool behaviour during high-precision operations. The nominal bore tolerance H4 ensures that the clamping seat delivers repeatable concentricity, which is particularly relevant for operations that demand tight tolerances or minimal rework. By favouring established standards, the holder supports straightforward integration into existing machine tool setups and simplifies quality control of mounted tools. Positive drive with Weldon flat for slip-free machining Equipped for tools with a cylindrical shank and a lateral drive flat to DIN 1835‑B, the Weldon drive arrangement prevents rotation between tool and holder under heavy cutting loads. The specified 20 mm clamping bore is intended for cylindrical shanks of that diameter, offering a robust mechanical engagement without relying solely on friction. This design reduces the risk of slippage during interrupted cuts and improves torque transmission, which in turn helps maintain surface finish and tool life. For production environments where secure tool retention is essential, the positive-drive arrangement adds a direct, mechanical safeguard. Compact dimensions that suit workshop workflows With a projection length of 35 mm and an outer diameter of 45 mm, this holder combines a compact footprint with sufficient material bulk for stable clamping. The modest projection reduces cantilever effects on the spindle and supports better dynamic stiffness, helping to keep vibration and chatter to a minimum. The straightforward geometry and compatibility with SK40 spindles make the component a practical choice for toolrooms and industrial shops seeking a balance between accessibility for tool changes and the rigidity needed for repeatable machining cycles. Integration benefits include reduced setup time and predictable tool offsets for programming. Contact Metav Werkzeuge for technical matching of TECWERK toolholders to machine tapers — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com to confirm suitability and ordering details Technical data Article number: 2000833739NW Label: Flächenspannfutter DIN 69871AD Weldon Spann-D.20mm SK40 A.-L.35mm TECWERK Product type: Face clamping holder Manufacturer: TECWERK Facts Taper standard: DIN 69871 Form AD Taper size: SK40 Clamping diameter: 20 mm Bore tolerance: H4 Projection A: 35 mm Outer diameter D: 45 mm Special features Weldon lateral drive flat to DIN 1835-B For tools with cylindrical shank and lateral drive flat Steep taper design for low runout Packaging unit: 1 Brand: TECWERK FAQ What taper standard does the holder use? The holder uses the DIN 69871 Form AD steep taper with an SK40 connection, as stated for this TECWERK Weldon toolholder (SKU 2000833739NW). Which tool shank types are compatible? Tools with a cylindrical shank and a lateral drive flat to DIN 1835‑B are compatible with this holder; the design supports positive drive engagement. What is the clamping diameter and tolerance? The clamping bore is 20 mm with a bore tolerance of H4, providing precise and repeatable seating for matching shanks. What are the key dimensions to consider for setup? Important dimensions are projection A = 35 mm and outer diameter D = 45 mm; these affect reach and stiffness in the spindle. Is this holder suitable for heavy-duty machining? The Weldon drive and steep taper provide secure torque transfer and stable seating suitable for demanding operations where positive drive and low runout are required. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
45mm Face Clamping Chuck Weldon Shank Ø16mm, DIN 69871 Form AD - TECWERK
Combine the secure Weldon lateral drive, the steep DIN 69871 Form AD taper and the precise 16 mm clamping diameter to ensure consistent tool retention and repeatability in production. Order the TECWERK Weldon face clamping holder directly via Metav Werkzeuge or consult our technical advisors for integration guidance. TECWERK Weldon face clamping holder — DIN 69871 Form AD, SK40, clamping Ø 16 mm TECWERK Weldon face clamping holder for SK40 spindles, designed to take cylindrical‑shank tools with a lateral drive surface to DIN 1835‑B and to provide secure, repeatable clamping for milling and drilling operations on vertical machining centres Weldon shank for positive lateral drive Steep taper DIN 69871 Form AD Clamping diameter 16 mm SK40 spindle taper, 45 mm body diameter Secure positive drive for high‑torque operations The Weldon lateral drive design transmits torque positively via a side clamping flat, reducing slippage under heavy cut conditions. That mechanical engagement, combined with the 16 mm clamping diameter, supports tools with cylindrical shanks to DIN 1835‑B, so torque transfer is direct and reliable. For workshops seeking predictable performance, this form of positive drive simplifies tool selection and minimises downtime caused by slippage or premature tool change‑outs. Precision taper for concentricity and fast tool changes The holder uses the steep taper DIN 69871 Form AD, which establishes axial seating and repeatable concentricity on the SK40 interface. A correctly seated taper reduces radial runout and improves surface finish and tool life; the bore tolerance H4 noted for the clamping bore contributes to consistent grip and alignment. For production runs where repeatability matters, the steep taper delivers fast changeover with measurable stability from one cycle to the next. Compact dimensions that integrate easily into existing setups Measured dimensions of A = 35 mm projection and D = 45 mm body diameter make the holder compact enough for tight tool arrangements while providing sufficient mass for stable clamping. The combination of the SK40 spindle interface and a 16 mm clamping capacity enables direct replacement of common Weldon holders without extensive fixture alterations. This physical compatibility reduces retrofit time and keeps the machine back in productive use sooner. Practical benefits for workshop productivity By pairing a positive lateral drive with a precision taper and a tight clamping bore, the holder offers improved tool retention and consistent repeatability—factors that reduce scrap, rework and machine idle time. The simple mechanical principle behind the Weldon flat keeps maintenance straightforward, and the standardised interfaces mean the holder integrates with established tool inventories and collet systems. For operations focused on throughput and reliability, this configuration supports steady production flow. For straightforward integration and assured supply of the TECWERK Weldon face clamping holder (SKU 2000833732NW), contact Metav Werkzeuge in Emmerich for technical advice and prompt dispatch: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: 2000833732NW Product type: Face clamping holder Brand: TECWERK Facts Norm: DIN 69871 Form AD Clamping diameter: 16 mm A (projection length): 35 mm D (body diameter): 45 mm Spindle taper: SK40 Special features Weldon lateral drive for tools with cylindrical shank to DIN 1835‑B Bore tolerance H4 Steep taper for secure axial seating FAQ What shank types are compatible with this holder? The TECWERK Weldon face clamping holder is designed for tools with a cylindrical shank and a lateral drive flat to DIN 1835‑B and will accept such tools securely at the 16 mm clamping diameter. How does the DIN 69871 Form AD taper affect repeatability? The steep DIN 69871 Form AD taper of the holder ensures axial seating on the SK40 spindle, improving concentricity and reducing radial runout for more consistent machining results. Is the clamping bore tolerance critical for performance? Yes. The clamping bore specified with H4 tolerance maintains tight grip and alignment, which contributes to reliable tool retention and repeatable positioning during production. Can this holder be used directly in machines with SK40 spindles? The holder is manufactured for SK40 interfaces and is intended for direct installation on compatible spindles without additional adapters, matching common workshop standards. What is the article number for ordering or reference? Reference the SKU 2000833732NW when enquiring or ordering the TECWERK Weldon face clamping holder to ensure the correct configuration is supplied. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
45mm Horseshoe Magnet With 118N Holding Force, AlNiCo 500 Coating - TECWERK
Take advantage of a compact, high‑temperature AlNiCo 500 solution with a reliable 118 N holding force and a 5 mm mounting bore for fixed workshop fixtures; the combination of thermal resilience and precise dimensions supports consistent production workflows. Order the horseshoe magnet directly via Metav Werkzeuge or ask our consultants if needed. Horseshoe Magnet L45 x B30 x H30 mm – AlNiCo 500, 118 N holding force (TECWERK) The Horseshoe Magnet L45 x B30 x H30 mm is a compact AlNiCo retaining magnet designed for high‑temperature fixtures and secure holding tasks in workshops and production cells. AlNiCo 500 for excellent thermal stability Holding force 118 N for secure retention Compact 45 x 30 x 30 mm with 5 mm bore Consistent magnetic retention for elevated temperatures The compact U‑shaped design provides a predictable holding force of 118 N, making it suitable for repeatable positioning and short‑term retention of small components. Manufactured from AlNiCo 500, the magnet maintains magnetic performance at elevated temperatures — the specified maximum operating temperature of 450 °C ensures stability where standard ferrite magnets would demagnetise. This thermal resilience is particularly relevant for assembly jigs, brazing fixtures, or processes that expose fixtures to heat, enabling a reduction in rework and downtime through reliable clamping behaviour. Small footprint and practical mounting for fixtures With outer dimensions of 45 x 30 x 30 mm and an integrated 5 mm bore, the magnet fits into compact jigs and can be secured with standard fasteners for repeatable alignment. The hole facilitates straightforward mechanical fixing, while the compact geometry supports close‑quarter clamping without obstructing adjacent tooling. The magnet’s coating bake temperature of 200 °C indicates compatibility with common paint and coating processes, allowing it to withstand finishing steps without loss of surface integrity. Material choice and predictable lifecycle performance Constructed from AlNiCo 500, this horseshoe magnet combines good corrosion resistance and dimensional stability with sustained magnetic properties at high temperatures. The solid construction minimises deformation risks and provides a reliable magnetic anchor across numerous cycle operations. For applications requiring consistent magnetic behaviour under thermal stress, the material selection reduces the need for oversized clamps or redundant fixturing, supporting faster set‑ups and leaner workflows. For project advice on integrating the TECWERK horseshoe magnet into heat‑exposed fixtures or for assistance selecting the right AlNiCo solution, contact Metav Werkzeuge in Emmerich via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000832263NW UID: 4000832263NW Label: Hufeisenmagnet L45xB30xH30mm sta.Haftkraft 118N Facts Material: AlNiCo 500 Dimensions: 45 x 30 x 30 mm Holding force (max): 118 N Bore diameter: 5 mm Max operating temperature: 450 °C Coating bake temperature: 200 °C Special features Product type: Horseshoe magnet Brand: TECWERK Packing unit: 1 FAQ What maximum temperature can the magnet withstand? The magnet is specified for a maximum operating temperature of 450 °C, thanks to its AlNiCo 500 composition. How strong is the holding capacity in practical terms? The 118 N holding force provides secure retention for small parts and fixtures in typical workshop applications. Is the magnet ready for mechanical fastening? Yes, the integrated 5 mm bore permits mechanical attachment to jigs or mounting plates for repeatable positioning. Can the magnet tolerate common coating processes? The listed coating bake temperature of 200 °C indicates suitability for many paint and lacquer cycles without surface damage. For which tasks is this horseshoe magnet most appropriate? The magnet is intended for heat‑exposed fixtures, positioning aids and small clamping duties where a compact, thermally stable magnetic solution is required. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
45mm M30 Hex Nut Swaged And Milled Strength Class 10, DIN 6331 - AMF
Combine robust DIN 6331 compliance with strength class 10 and precise dimensions (M30, SW 46, 45 mm height) for reliable clamping in demanding industrial assemblies; order the AMF hexagon nut directly via Metav Werkzeuge or consult our technical advisors if specification help is required. AMF Hexagon Nut DIN 6331 M30 – Strength Class 10, SW 46 A Hexagon Nut DIN 6331 M30 engineered for secure clamping in heavy-duty flanged and shaft connections across industrial and workshop applications Conforms to DIN 6331 standard Strength class 10 for high load resistance Wrench size SW 46 for precise torque application Total height 45 mm, corner 51.3 mm Reliable performance for heavy-duty assemblies The combination of DIN 6331 conformity and strength class 10 offers a clear technical advantage where high clamping force and fatigue resistance matter. The threaded M30 form provides a standardised interface for shafts and studs, while the robust mechanical class ensures predictable behaviour under tension and shear. For procurement and engineering teams, this means fewer unexpected failures, longer maintenance intervals and simplified component qualification in safety‑critical joints. Precision dimensions reduce setup and adjustment time Consistent geometry—notably the wrench size SW 46, overall height 45 mm and corner measurement 51.3 mm—ensures repeatable seating and even load distribution on the mating surfaces. Precise face and corner dimensions minimise the need for shims or secondary machining and allow torque tools and socket drives to seat correctly first time. That dimensional reliability translates directly into quicker assembly cycles and reduced downtime during maintenance. Robust production and traceable standards for dependable supply Manufactured by AMF with a pressed and milled finish, the component delivers flat bearing faces and defined edge geometry for secure tool engagement. The construction and finishing process support stable clamping behaviour and resistance to fretting at the contact surfaces. For projects requiring traceability, the item is identified by SKU 4000603337NW and supplied singly in the stated packaging unit; Metav Werkzeuge’s procurement team can confirm batch and inspection data on request, ensuring compatibility with quality management procedures. Contact Metav Werkzeuge for specification guidance and reliable supply of AMF hexagon nuts (M30, strength class 10) from Emmerich — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com to request technical documentation or delivery options Technical data Article number: 4000603337NW Product type: Hexagon nut Standard: DIN 6331 Manufacturer: AMF Package unit: 1 Core dimensions Thread size: M30 Wrench size: 46 mm Total height: 45 mm Corner measurement: 51.3 mm Features Strength class 10 Pressed and milled finish Suitable for industrial clamping and flange connections Labelled SW 46 for tool compatibility FAQ Which standard does this nut conform to? The Hexagon Nut DIN 6331 M30 conforms to the DIN 6331 standard, ensuring standardised dimensions and interchangeability. What indicates the load capability of this component? The AMF hexagon nut (M30) is rated strength class 10, which denotes high tensile and shear capacity for demanding assemblies. Which spanner or socket size is required for assembly? The specified tool size is SW 46 (46 mm), matching the nut’s wrench flats for correct torque application. What are the principal dimensions to check for installation? Key dimensions are thread M30, overall height 45 mm, and corner measurement 51.3 mm for clearance and seating considerations. How is the surface finished and what does that mean in practice? The nut is pressed and milled, providing flat bearing faces and precisely defined edges that improve tool engagement and reduce the need for secondary machining Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
45mm Threaded Rod With Magnet, 87mm Height, 30 Kg Load Capacity - Vertex
Take advantage of the combination of compact design, reliable magnetic clamping and a predictable 30 kg load rating to secure small assemblies with confidence. Order the magnetic threaded rod directly via Metav Werkzeuge or ask our consultants if needed. Threaded Rod with Magnet VSJM-85 — Magnetic clamping stud, 45 mm diameter by Vertex The Threaded Rod with Magnet VSJM-85 is a compact magnetic clamping accessory designed for precise workholding and temporary fixturing in busy workshops and production jigs. Magnetic clamping function 45 mm diameter for compact set-ups 30 Kg maximum load capacity Robust 0.7 kg construction Strong magnetic clamping for reliable temporary fixturing The magnetic base provides consistent holding force for short-term fixturing and positioning tasks, reducing the need for complex clamps. With a compact diameter of 45 mm, the component is suited to confined set-ups where space is at a premium. The magnetic holding action enables quick placement and repositioning of the stud, improving process speed and reducing downtime while maintaining secure contact with ferrous surfaces. Predictable load capacity and compact dimensions for stable set-ups Engineered for controlled performance, the stud delivers a rated 30 kg maximum load within its geometric limits. At a height of 87 mm and a mass of 0.7 kg, the element combines low weight with vertical stability, which is beneficial for modular assembly stations and inspection benches where excessive mass can disturb balance. These dimensions support repeatable clamping behaviour and make it straightforward to calculate safe working envelopes for delicate operations. Simple integration into workshop workflows and toolsets The threaded design allows straightforward incorporation into existing fixtures and jigs, enabling rapid retrofitting of magnetic fixation where required. As a Vertex component, the stud fits typical industrial workflows and can be used as a temporary anchor or alignment aid during set-up, measurement and light assembly tasks. For specialised applications or further technical specifications, Metav Werkzeuge can provide guidance and supplementary documentation to ensure the element meets the intended process requirements. Contact Metav Werkzeuge in Emmerich to discuss the VSJM-85 magnetic threaded rod and its suitability for specific fixtures; reach out by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for tailored advice and local supply information Technical data Article number: VSJM-85 GTIN: 4061905087233 Manufacturer: Vertex Key measurements Diameter: 45 mm Height: 87 mm Weight: 0.7 kg Maximum load: 30 Kg eClass: 23110301 Features Magnetic clamping function Threaded stud design Compact form factor for space-limited set-ups Suitable for temporary fixturing and positioning FAQ What is the maximum load the stud can hold? The rated maximum load is 30 kg for the VSJM-85 threaded rod with magnet; actual holding performance depends on the contact surface and installation. Can the magnetic rod be integrated into existing fixtures? Yes. The threaded design of the VSJM-85 permits integration into standard jigs and modular fixturing systems where a compact magnetic anchor is required. What are the main dimensions to consider when planning an installation? Key dimensions are the 45 mm diameter and 87 mm height, with a mass of 0.7 kg; these values help determine clearance and centre-of-gravity considerations. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
45mm Threaded Rod With Magnetic Base 116mm Height, 30 Kg Load Capacity - Vertex
Take advantage of the combination of magnetic retention, robust 45 mm diameter and compact height for secure, space-saving fixturing in mechanical workshops; order the threaded rod directly via Metav Werkzeuge or consult the team for application advice. Threaded Rod with Magnet (VSJM-110) – Ø45 mm, 30 kg capacity by Vertex A Threaded Rod with Magnet designed for reliable temporary fixturing and holding tasks in workshops and light industrial settings. Magnetic retention for quick fixture Diameter 45 mm for heavy-duty applications Max load 30 kg for secure holding Compact height 116 mm for tight spaces Dependable magnetic holding that speeds setup The magnetic retention of this threaded connector reduces setup time by eliminating the need for clamps in many repeatable tasks. The integrated magnet provides consistent holding force while the substantial 45 mm diameter gives mechanical stability under load, translating into fewer interruptions in production. This behaviour supports efficient workflows in assembly, inspection and temporary mounting operations where repeatability and speed are prioritised. The design also helps to align components accurately prior to final fastening. Compact, robust geometry for constrained workspaces A height of 116 mm combined with a total mass of 0.8 kg produces a compact component that fits into confined fixturing arrangements without sacrificing stability. The combination of modest mass and solid form factor makes this rod suitable for benches, jigs and mobile fixtures where space is limited; the geometry ensures that the centre of gravity remains favourable when carrying loads up to 30 kg. Clear, measurable specifications simplify integration into CAD layouts or pick-lists for workshop planning. Practical benefits for everyday workshop use With an emphasis on predictable performance, the magnetic threaded connector supports safer handling and faster changeovers. The product’s measurable characteristics—diameter, height and rated load—allow planners to evaluate suitability without guesswork. Where non-magnetic fixturing would require additional hardware, the integrated magnet reduces the parts count and makes the solution more compact. For those unfamiliar with magnetic fixtures, the principle is straightforward: magnetic attraction provides temporary holding while the threaded profile offers mechanical engagement when required. Contact Metav Werkzeuge for tailored advice on applying the Vertex threaded rod in specific fixtures or to discuss compatibility with existing jigs and tooling Technical data Article number: VSJM-110 GTIN: 4061905089282 Manufacturer: Vertex Facts Diameter: 45 mm Height: 116 mm Weight: 0.8 kg Max load: 30 kg Special features Integrated magnet Category: Vertex SKU: VSJM-110 FAQ Is the magnetic threaded rod suitable for permanent fastening? The threaded rod with magnet (VSJM-110) is intended for temporary fixturing and holding; permanent fastening should use standard threaded fasteners or locking hardware as appropriate. What load can be expected in horizontal use? The VSJM-110 is specified for a maximum load of 30 kg; actual usable load in a given orientation depends on contact area and surface condition. Can the magnet damage sensitive parts during fixturing? The integrated magnet provides holding force. For delicate or magnetically sensitive parts, additional protective measures or non-magnetic fixtures should be considered when using the VSJM-110. Is the product compatible with jig and fixture systems? The compact dimensions and substantial diameter make the threaded rod compatible with many bench and jig systems; measurements provided (45 mm Ø, 116 mm height) support straightforward integration. What distinguishes this Vertex component from plain threaded rods? The key difference is the integrated magnet, which offers quick temporary retention and reduces the need for additional clamping hardware when using the VSJM-110 in assembly or inspection setups. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
45mm Toggle Clamp Vertical Base With Hook, 1,500 N Thrust, Zinc Plated - Kukamet
Take advantage of the combination of a galvanised steel body, a vertical base for compact mounting and clear mechanical ratings (1,500 N clamping, 2,000 N holding) to ensure reliable fixture performance in production and workshop environments. Order the clamp directly via Metav Werkzeuge or consult our advisors for application matching. Kukamet 312 Toggle Clamp — vertical base, hook, 1,500 N clamping force A 312 toggle clamp designed for secure, repeatable temporary fastening in jigs, fixtures and small-assembly applications, featuring a vertical base and integrated hook for flexible mounting Vertical base for compact mounting Galvanised steel body for corrosion resistance 2,000 N holding force for secure clamping Durable, corrosion-resistant construction that lasts The galvanised finish and robust steel construction provide a durable surface that resists workshop wear and moisture, extending service life and reducing replacement frequency. Built for frequent use, this latch-style clamp combines a compact footprint with steady mechanical performance, allowing machine shops and assembly lines to rely on consistent results. The Kukamet 312 is engineered to maintain clamping integrity in routine production, reducing downtime associated with corroded or failed fasteners. Clear mechanical performance for predictable results Rated with a maximum clamping force of 1,500 N and a holding force of 2,000 N, the unit separates the actuating pressure from the sustained holding capability; the working stroke generates the clamp action while the latch maintains the load. These figures provide a verifiable basis for fixture design, enabling straightforward integration into jigs where specific force thresholds are required. The numeric ratings support engineering decisions and help ensure safe, repeatable clamping across batches. Space-saving vertical base and hook for flexible installation A vertical base allows installation on narrow fixture edges or small pallets, while the integrated hook provides a simple engagement point for tensioned closures; the thread length 45 mm accommodates adjustment during setup. With a weight of 0.175 kg, the device is lightweight yet stable, simplifying handling during fixture assembly. The compact design supports lean production layouts and quick retrofits without major fixture redesigns, helping maintain throughput in constrained workspaces. Contact Metav Werkzeuge for tailored procurement and technical matching of the Kukamet 312 toggle clamp — email info@metav-werkzeuge.com or call +49 2822 7131930 for precise specification support and supply from Emmerich Technical data SKU: 312-2 GTIN: 8680731502343 Brand: Kukamet eClass: 21041718 ETIM: EC011973 Facts Maximum clamping force: 1,500 N Maximum holding force: 2,000 N Thread length: 45 mm Weight: 0.175 kg Special features Material: galvanised Mounting: vertical base With hook: yes File: 312-katalogseite.pdf FAQ What are the rated clamping and holding forces? The clamp is rated for a maximum clamping force of 1,500 N and a maximum holding force of 2,000 N when used as a toggle latch in a properly designed fixture. Is this clamp suitable for narrow fixture edges? Yes, the vertical base design enables secure mounting on narrow edges and compact pallets, making it suitable for constrained fixture layouts. Can the hook be adjusted for different engagement lengths? The hook works with the 45 mm thread length to allow adjustment during setup; the mechanism permits fine tuning for consistent engagement. What materials and finishes are used? The body is galvanised, providing corrosion resistance suitable for typical workshop and assembly environments. Which SKU should be ordered for this model? Order the model under SKU 312-2; the product is listed as a Kukamet 312 toggle clamp for fixture and jig applications. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
45x100x67mm V-Block Precision Granite Vee with 0.05mm Accuracy, 2.5kg - Vertex
Take advantage of the combination of high precision, robust cast-iron stability and compact dimensions for dependable setup and measurement tasks on the shop floor. Order the part directly via Metav Werkzeuge or consult the team for application advice. V-4V Prism Block — 0.05 mm accuracy, fine-grain cast iron (Vertex) A V-4V prism block engineered for secure workpiece support and precise inspection in workshop and metrology tasks High-precision 0.05 mm tolerance Made from fine-grain cast iron Compact dimensions 45×100×67 mm Reliable support for accurate measurement results The V-4V prism block delivers consistent precision with a rated accuracy of 0.05 mm, which reduces uncertainty during layout, inspection and marking tasks. This level of tolerance means the block is suitable for comparative checks and fixture set-up where repeatability is essential. In practice, a defined numeric accuracy indicates the expected maximum deviation under normal use; operators benefit from fewer secondary checks and a lower risk of scrap, improving workflow efficiency. Stable clamping, reduced vibration and easy handling Constructed from fine-grain cast iron, the prism block offers intrinsic damping characteristics that stabilise workpieces during measurement and light machining set-ups. The unit’s mass of 2.5 kg provides a firm base without being cumbersome, while the 45×100×67 mm footprint keeps the block compact on crowded benches. The V-profile secures cylindrical parts reliably, making it practical for repetitive tasks and multi-step inspection sequences where positional stability translates directly into better measurement confidence. Built for longevity and straightforward use on the shop floor The robust material choice and solid machining make the prism block resistant to everyday wear, maintaining its critical surfaces over time and reducing the need for frequent replacement. The geometry is straightforward to clean and position, supporting fast changeovers and predictable results in routine quality checks. Supplied by a recognised manufacturer, this V-block combines traditional manufacturing materials with precise tolerances to meet standard workshop demands while supporting professional metrology processes. For reliable workholding and precise inspection tasks, request the Vertex V-4V prism block through Metav Werkzeuge — local stock and expert advice available from Emmerich for quick, dependable delivery and application guidance. Technical Data Article number: V-4V GTIN: 4061905088162 eClass: 21160304 Facts Dimensions: 45×100×67 mm Weight: 2.5 kg Accuracy: 0.05 mm Special features Material: fine-grain cast iron Manufacturer: Vertex Product type: prism block (V-block) FAQ What tolerance can be expected from this prism block? The V-4V prism block is specified with an accuracy of 0.05 mm, suitable for reliable comparative measurements and setup tasks. Which material is used for the block and what does that mean in practice? The block is made from fine-grain cast iron; this provides good vibration damping and stable support for workpieces during inspection and light set-up operations. Is the V-4V suitable for bench-top metrology and workshop use? Yes, the V-4V prism block is designed for workshop and inspection bench applications where compact size and stability are required. How large is the footprint and what weight should be expected? The dimensions are 45×100×67 mm and the weight is 2.5 kg, offering a compact yet solid base for clamping cylindrical parts. Who manufactures this prism block? The prism block is produced by Vertex and supplied under the SKU V-4V for consistent quality and traceability. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
45x45mm Table Clamp Accessory for LED Lamps, V-21 - Vertex
The combination of secure mounting, a compact 45 x 45 mm clamping interface and a lightweight build ensures steady positioning of lighting without occupying valuable bench space — order the accessory directly via Metav Werkzeuge or consult the team for tailored advice. V-21 table clamp 45 x 45 mm — accessory for LED lamps by Vertex V-21 is a precision table clamp designed to secure lighting fixtures to benches and 45 x 45 mm profiles for stable illumination in workshop environments. Secure clamp for 45 x 45 mm profiles Compact footprint for tight workspaces Lightweight at 0.48 kg Compatible with LED lamp mounts Consistent, vibration-free lighting for precise tasks A table clamp that provides secure mounting brings immediate benefits to tasks that depend on steady light. Designed for use with LED lamps, this clamp holds fixtures firmly to worktops and standard 45 x 45 mm profiles, reducing unwanted movement and the need for repeated readjustment. The result is more consistent illumination during inspection, assembly or fine assembly work, which supports higher process reliability and fewer interruptions to workflow. Keeps the workstation clear and easy to adapt The compact footprint of the clamp preserves bench space while allowing flexible placement of lighting where it is most effective. At lightweight (0.48 kg) the accessory is simple to handle and relocate between jobs without strain, helping workshops adapt quickly to changing tasks. This space-saving solution contributes to an efficient layout by keeping the work area accessible and well lit without bulky mounts or permanent fixtures. Engineered compatibility and dependable supply Manufactured by Vertex, the clamp is intended as a straightforward accessory for lighting systems used in industry and craft shops. Its interface to 45 x 45 mm profiles ensures compatibility with common framing and support systems, simplifying integration into existing setups. Procurement via a trusted partner supports continuity: reliable delivery and consistent product quality help keep production schedules on track and reduce the risk of downtime. Contact Metav Werkzeuge for personalised procurement advice on the V-21 clamp or to arrange purchase — email info@metav-werkzeuge.com or call +49 2822 7131930 for direct assistance Technical data Article number: V-21 GTIN: 4061905091827 Brand: Vertex Facts Profile size: 45 x 45 mm Weight: 0.48 kg Product type: Table clamp Special features Suitable for LED lamps mounting SKU: V-21 Category: Vertex accessories FAQ Is the clamp suitable for standard 45 x 45 mm profiles? Yes. The V-21 table clamp is designed specifically for attachment to 45 x 45 mm profiles and compatible framing systems. Can the clamp be used with LED lamps? The accessory is intended for mounting LED lamps and similar lighting fixtures to benches and profiles. What is the weight of the clamp? The clamp weighs 0.48 kg, making it easy to handle and reposition as needed. Who manufactures the clamp and how is it identified? The clamp is manufactured by Vertex and is listed under article number V-21 (GTIN 4061905091827). Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
45° Chamfering And Deburring Machine 0–12,000 rpm, 330x330x300mm, 40 kg - Vertex
Benefit from 45° chamfering and variable speed up to 12,000 r.p.m. to remove burrs efficiently and achieve consistent edge quality; the compact 330×330×300 mm footprint and sturdy 40 kg construction ensure stable, repeatable operation. Order the VCF-300A directly via Metav Werkzeuge or request advice from their consultants for seamless integration. VCF-300A Chamfering and Deburring Machine — 0–12,000 r.p.m., 45° chamfer (Vertex) The VCF-300A Chamfering and Deburring Machine is a dedicated unit for precise 45° chamfering and deburring of most workpieces, designed for workshop and light production use. Variable speed 0–12,000 r.p.m. Fixed 45° chamfer angle Works on most materials except hardened Compact footprint 330×330×300 mm High-speed, consistent chamfering for reduced rework The VCF-300A delivers a variable speed range of 0–12,000 r.p.m., enabling process optimisation for different materials and burr sizes. Higher spindle speeds reduce cutting forces on thin sections and smooth finishes on softer alloys, while lower speeds permit controlled material removal on tougher workpieces. The fixed 45° chamfer setting eliminates angle adjustment errors and supports repeatable results across batches. For production environments this translates into fewer reworks and a shorter cycle time per part, helping to maintain throughput without sacrificing edge quality. Versatile handling across materials and geometries Designed to process most materials except hardened steels, this unit accommodates a wide range of workshop tasks from aluminium and brass to various plastics. The ability to manage both regular and irregular shapes reduces clamping complexity: irregular contours often require only minor fixturing changes rather than a full tool change or bespoke fixtures. The chamfering and deburring operations are explained simply as the removal of sharp edges and the creation of a defined bevel for assembly or safety—functions that lower downstream finishing costs and improve component fit. Compact footprint with stable operation and simple installation With overall dimensions of 330×330×300 mm and a mass of 40 kg, the machine combines a small footprint with enough mass for vibration damping during cutting. The unit runs from a single-phase 220 V supply (50/60 Hz), which simplifies electrics in most small workshops and avoids three-phase conversions in many installations. The moderate weight supports benchtop placement with straightforward anchoring; the reduced spatial demand aids flexible workshop layout and fast changeover between jobs. Proven brand and dependable supply chain Supplied by Vertex, the machine benefits from established manufacturing standards and clear spare-parts traceability. Sourcing through Metav Werkzeuge adds the advantage of a European distribution hub and quality-filtered logistics, which helps to maintain parts availability and consistent delivery. Confidence in the supply chain reduces project risk and supports planning for recurring production demands. Contact Metav Werkzeuge in Emmerich for tailored advice on the VCF-300A, specification checks and delivery options — email info@metav-werkzeuge.com or call +49 2822 7131930 for direct assistance Technical data Article number: VCF-300A GTIN: 4061905090639 ECLASS: 36639025 Dimensions: 330x330x300 mm Weight: 40 kg Core specifications Speed: 0–12000 r.p.m. Chamfer angle: 45° Supply voltage: 1Ø, 220V; 50Hz/60Hz Special features Suitable for almost all materials (except hardened) Works with regular and irregular shapes Manufacturer: Vertex FAQ What range of spindle speeds does the unit offer? The VCF-300A provides a variable spindle speed from 0 to 12,000 r.p.m., allowing adaptation to different materials and burr conditions. Can the machine produce other chamfer angles besides 45°? The VCF-300A is configured for a defined 45° chamfer angle to ensure repeatability; alternative angle requirements should be discussed with Metav Werkzeuge for possible custom solutions. Is the VCF-300A suitable for use on plastics and soft metals? Yes, the VCF-300A is suitable for most materials including plastics and soft metals; hardened steels are excluded from the specified material suitability. How large is the machine and what workspace does it require? The unit measures 330×330×300 mm and weighs 40 kg, offering a compact footprint that fits standard workshop benches with minimal space requirement. Who manufactures the VCF-300A and how is supply handled? The machine is manufactured by Vertex and distributed via Metav Werkzeuge for European supply and logistics. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
45° Chamfering And Deburring Machine Handheld 380x130mm 12000rpm With Indexable Inserts SPMW - Vertex
Take advantage of the combination of portable hand-operated use, a fixed 45° chamfer and the supplied indexable inserts for efficient chamfering and deburring of large, hard-to-move components. Order the VCF-600 bevel and deburring machine directly via Metav Werkzeuge or ask our consultants if needed. VCF-600 bevel and deburring machine by Vertex — hand-operated, 45° chamfer, 12,000 rpm The VCF-600 bevel and deburring machine is a compact, hand-operated chamfering tool designed for fast edge preparation and deburring of large workpieces that are difficult to move, providing consistent 45° chamfers. Hand-operated for portable use High-speed 12,000 rpm spindle Fixed 45° chamfer angle Includes SPMW and ZSPMW indexable inserts Fast, precise chamfering even when parts cannot be moved The VCF-600 delivers a consistent 45° chamfer at high speed, engineered to save handling time on heavy or fixed components. Its 12,000 rpm spindle allows rapid material removal while maintaining a controlled finish, so production cycles become shorter and rework is reduced. For shops transitioning from manual filing to mechanised edge preparation, this tool provides measurable throughput gains and a reliable surface quality that translates into lower downstream processing costs. Portable design that reduces handling and set-up time Weighing just 3.7 kg and configured for hand operation, this chamfering machine is optimised for mobility on the shop floor. The lightweight construction and compact footprint (380 x 130 mm) make it straightforward to manoeuvre around welded assemblies, large plates or mounted fixtures, cutting the need to unmount workpieces. The combination of portability and a robust housing ensures sustained performance in everyday industrial use. Flexible power options for international workshops Equipped for multiple supply configurations, the unit supports single-phase 110 V/220 V and three-phase 220 V / 380 V / 415 V at 50/60 Hz, enabling deployment in varied electrical environments without extensive rework. Clear specification of the supply modes reduces installation uncertainty and speeds commissioning on international sites, making the machine suitable for global shops and mobile service engineers who require adaptable tooling. Ready to work: indexable inserts and practical maintenance Delivered with SPMW 090304 and ZSPMW 090308 indexable inserts, the tool is ready for immediate use on a wide range of ferrous and non-ferrous edges. Indexable inserts simplify maintenance and lower running costs by allowing quick corner changes instead of full-tool replacement; operators benefit from minimal downtime and predictable consumable management. Basic maintenance consists of insert checks and routine lubrication, tasks that are straightforward even in small workshops. Contact Metav Werkzeuge for personalised technical advice and purchasing information on the Vertex VCF-600 — available from our Emmerich quality hub via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: VCF-600 GTIN: 4061905090295 Manufacturer: Vertex Core technical data Dimensions: 380 x 130 mm Speed: 12,000 rpm Weight: 3.7 kg Chamfer angle: 45° Supply voltage: 3-phase 220 V; single-phase 110 V/220 V; 3-phase 380 V/415 V (50/60 Hz) Special features Hand-operated execution Suitable for large workpieces that are difficult to move Includes indexable inserts: SPMW 090304 and ZSPMW 090308 FAQ What materials can be processed with this chamfering machine? The Vertex VCF-600 bevel and deburring machine is suitable for common workshop metals and typical workpiece materials used in chamfering; the supplied indexable inserts cover a broad range of standard applications. Is the machine suitable for on-site or mobile use? Yes. The VCF-600 is a hand-operated, portable unit with a compact footprint and a weight of 3.7 kg, designed for use directly at the workpiece when moving the part is impractical. How are the inserts replaced and which types are included? The machine is supplied with SPMW 090304 and ZSPMW 090308 indexable inserts; replacement consists of straightforward insert changes, reducing downtime compared with brazed or solid-tool regrinds. Which electrical supplies are supported for international deployment? The VCF-600 supports multiple supply configurations: single-phase 110 V/220 V and three-phase 220 V or 380 V/415 V at 50/60 Hz, allowing flexible installation across different workshop standards. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
45° Chamfering And Deburring Machine With Grinding Wheel Ø165xØ22mm, 3500 rpm, 330x410mm - Vertex
Efficient finishing and reliable deburring are delivered by the combination of a 3,500 r.p.m. spindle and the supplied grinding wheel, producing repeatable 45° chamfers on both soft and hard materials; the compact footprint and flexible power options support fast integration into existing workflows. Order the VCF-500S directly via Metav Werkzeuge or ask our consultants if needed. VCF-500S Chamfering and Deburring Machine — 45° chamfering, 3,500 r.p.m. (Vertex) The VCF-500S is a compact chamfering and deburring machine designed to deliver controlled edge finishing and consistent 45° bevels for a wide range of workshop applications Compact finish machine, 45° chamfer angle 3,500 r.p.m. operating speed for consistent results Supplied with Ø165×Ø22 mm grinding wheel Flexible power options: single or three-phase Consistent 45° chamfers for mixed materials The combination of a high-speed spindle and a purpose-driven grinding wheel results in reliable edge quality across different substrates. Operating at 3,500 r.p.m., the unit achieves a uniform material removal rate that reduces rework and shortens cycle times; this is particularly beneficial when parts require repeatable, machinist-grade chamfers. The integrated grinding disc, matched to the machine’s angular setting, simplifies setup and ensures the same finish is obtained from the first piece to the last. Workplace-friendly size and electrical flexibility With a compact footprint of 330×410 mm and a transport weight of 26 kg, the machine is designed to sit comfortably on a bench or within a small production cell without compromising accessibility. Multiple supply configurations — including single-phase and three-phase options — enable straightforward electrical integration in varied shop environments, reducing installation time and avoiding long downtimes for rewiring. The compact design supports efficient floor space use while maintaining robust finishing performance. Consumables, maintenance and operational clarity The machine is supplied with a Ø165×Ø22 mm grinding wheel, which can be replaced with standard abrasive discs for different surface requirements. The straightforward mounting and clear angular reference for 45° chamfering make consumable changes and operator training quick to carry out, lowering lifetime operating costs. Routine checks focus on wheel condition and spindle integrity, keeping maintenance intervals short and predictable and preserving consistent edge geometry across production runs. Choose Vertex precision for dependable finishing — contact Metav Werkzeuge in Emmerich for tailored advice or to secure the VCF-500S from our local stock. Technical data Article number: VCF-500S GTIN: 4061905089107 Included accessory: Grinding wheel Ø165×Ø22 mm Facts Dimensions: 330×410 mm Weight: 26 kg Speed: 3,500 r.p.m. Chamfer angle: 45° Power supply: 3Ø 220V or 1Ø 110V/220V 50Hz/60Hz and 3Ø 380V/415V Special features Suitable for soft and hard materials Supplied with grinding wheel Compact bench-mount design Consistent chamfering and deburring function FAQ What materials can be processed with this chamfering and deburring machine? The VCF-500S from Vertex is suitable for both soft and hard materials, delivering consistent deburring and 45° chamfers across common workshop substrates. Is the supplied grinding wheel compatible with standard abrasives? Yes, the included Ø165×Ø22 mm grinding wheel fits standard abrasive discs, allowing the Vertex VCF-500S to be adapted for different surface finishes and material hardnesses. Which power configurations are available for installation? The Vertex VCF-500S supports multiple supply options, including single-phase operation at 110V/220V and three-phase operation at 220V, 380V or 415V, making it suitable for varied electrical setups. How does the machine improve workflow in a small production environment? By combining a compact footprint with a 3,500 r.p.m. spindle and reliable wheel mounting, the VCF-500S reduces bench space needs and shortens setup times, improving throughput and consistency. What maintenance is required to retain chamfer accuracy? Routine inspection of the grinding wheel and spindle is recommended; maintaining correct wheel condition on the Vertex VCF-500S preserves the nominal 45° chamfer accuracy and prolongs component life. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
45° Pneumatic Angle Grinder 30mm Arbor 23,000 rpm, 160mm Length - Vertex
Compact 45° head and high rotational speed combine to deliver fast, precise material removal in restricted areas, while the lightweight 0.3 kg construction reduces operator fatigue. Order the unit directly via Metav Werkzeuge or consult our specialists for application-specific advice. VAG-8241 Pneumatic Angle Grinder — 45° head, 23,000 rpm (Vertex) The VAG-8241 is a compact pneumatic angle grinder with a 45° head designed for precision work in confined workshop spaces Compact 45° head for tight access High-speed rotation at 23,000 rpm Small 30 mm wheel for precision work Lightweight 0.3 kg for reduced fatigue Precision performance in confined spaces The combination of a 45° head and a small 30 mm wheel diameter makes this air-powered tool particularly well suited to jobs where access is limited and accuracy matters. High rotational speed at 23,000 rpm enables efficient cutting back of material and rapid surface refinement, while the compact overall length of 160 mm allows entry into narrow assemblies. Operators benefit from reduced effort thanks to the 0.3 kg mass, which lowers fatigue during repetitive finishing tasks and improves consistency in manual operations. Stable pneumatic power for continuous operation A pneumatic drive provides a favourable power-to-weight ratio and steady performance under load. The design reduces the need for electrical components in the tool head, which simplifies maintenance and keeps downtime low in a production environment. Consistent speed under varying load conditions supports repeatable results during grinding and light material removal, making this grinder a practical choice for frequent workshop use and inline finishing processes. Simple handling, fast integration into workflows Ergonomics and compact geometry enable comfortable one-handed use and faster cycle times on assembly or repair tasks. The grinder’s configuration supports close-up work on assemblies where a larger tool would be impractical, helping to improve throughput without sacrificing control. For procurement and workshop managers the unit offers an easy fit into existing compressed-air tool fleets; Metav Werkzeuge supplies the product from its European stock and can advise on selection and logistics to ensure rapid availability. Contact Metav Werkzeuge for tailored advice on integrating the Vertex VAG-8241 into production or maintenance operations from our Emmerich stock Technical Data Article number: VAG-8241 GTIN: 4061905084126 Brand: Vertex Core technical data Speed: 23,000 rpm Wheel / disc diameter: 30 mm Weight: 0.3 kg Overall length: 160 mm Head angle: 45° Special features Pneumatic / air-powered operation Compact 45° head for tight access Designed for precision grinding and finishing Lightweight design for reduced operator fatigue FAQ What is the primary use of this tool? The VAG-8241 pneumatic angle grinder is intended for precision grinding and finishing in confined areas where access and control are critical. What disc size does the grinder accept? The tool is specified for a 30 mm wheel or disc diameter, suitable for detailed surface work. What rotational speed does the unit achieve? The grinder runs at up to 23,000 rpm, providing high-speed material removal for efficient finishing. How heavy is the grinder? The Vertex VAG-8241 weighs approximately 0.3 kg, which helps reduce operator fatigue during repetitive tasks. Is this tool suitable for workshop integration? The compact format and pneumatic drive of the VAG-8241 allow straightforward integration into existing compressed-air tool fleets and production workflows. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
45–95mm Toggle Clamp Horizontal Base With Safety Lock, 7,000N Thrust, 8,000N Hold - Kukamet
Taking advantage of a robust 7 kN closing force and an 8 kN holding capacity, this lever latch secures workpieces reliably while the horizontal base and safety lock ensure stable, repeatable fixture mounting; order the latch clamp directly via Metav Werkzeuge or consult our specialists for application advice. Latch Clamp 311 — Horizontal-base lever latch with safety lock (Kukamet) The Latch Clamp 311 is a horizontal-base lever latch with safety lock and hook, engineered for fast, secure clamping in jigs, fixtures and assembly applications. Horizontal-base design for stable mounting Safety lock prevents unintentional release Adjustable arm 45–95 mm for variable clamping 7 kN closing force with 8 kN holding capacity Reliable clamping that speeds production The Latch Clamp 311 delivers a high closing force in a compact footprint, which translates into quicker cycle times and fewer re-clamps on production lines. The mechanism converts lever movement into consistent clamp pressure, providing a measurable and repeatable result for each actuation. With a 7 kN closing force and 8 kN holding capacity, the device suits medium-duty fixture tasks where fast clamping and release are required. The proven toggle mechanism reduces operator effort while maintaining secure retention during machining, assembly or transport inside the work cell. Secure mounting and practical dimensions for workshop use Designed with a horizontal base, the clamp mounts flat to plates or fixture blocks for maximum stability. The adjustable arm 45–95 mm allows adaptation to varying workpiece heights, and the 95 mm thread provides a wide adjustment range for fine setting. The component’s blackened finish offers corrosion resistance in standard workshop environments and a low-reflective surface for inspection tasks. With a nominal weight of 0.815 kg, the clamp balances robustness with manageable mass for fixtures that may be repositioned or transported between stations. Safety, hook option and typical applications Equipped with hook and a safety lock, the latch prevents accidental opening under vibration or shock, enhancing process safety in automated or semi-automated lines. Typical applications include holding parts in assembly jigs, temporary retention during welding preparation, and securing components during manual operations where rapid release is required. The compact lever construction supports ergonomic handling, while the clear mechanical locking gives confidence in repeatable production environments. For secure, efficient fixture solutions, contact Metav Werkzeuge to request the Kukamet Latch Clamp 311 for integration into standard jigs and assembly stations — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: B311-4-L GTIN: 8680731508284 Manufacturer: Kukamet Facts Closing force: 7000 N Holding capacity: 8000 N Arm range: 45–95 mm Thread length: 95 mm Weight: 0.815 kg Special features Horizontal base mounting Safety lock With hook Blackened finish Lever/toggle latch design FAQ How much clamping force does the latch provide? The Kukamet Latch Clamp 311 provides a closing force of 7000 N and a holding capacity of 8000 N, suitable for medium-duty fixture tasks. Can the clamp be adjusted for different part heights? Yes, the adjustable arm offers a range of 45–95 mm and the 95 mm threaded section allows precise height setting for varied workpiece dimensions. Is the latch suitable for use in welding fixtures? The latch’s safety lock and robust toggle mechanism make it appropriate for welding preparation and fixture holding where secure retention is essential. What mounting method is required for installation? The device uses a horizontal base for flat mounting to fixture plates or blocks, providing stable and repeatable positioning in jigs and assembly stations. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
460x370x860mm Tooling Rack Stand Multipurpose Storage With 3 Drawers, Assembled - Vertex
Take advantage of a compact, freestanding storage solution that combines three storage drawers with a padded top area for protected gauges and clamps, helping to streamline workshop workflow. Order the unit directly via Metav Werkzeuge or consult our advisors for integration guidance. VTC-20 freestanding tool cabinet with padded storage — Vertex The VTC-20 is a freestanding tooling rack designed as an accessory for universal knife grinders and general workshop storage. Freestanding tooling rack for workshop flexibility Three storage drawers for organised storage Padded storage area to protect precision gauges Supplied assembled — ready for immediate use Save time with organised, accessible tooling A compact tool cabinet that prioritises efficient tool organisation reduces search time and supports uninterrupted work processes. The VTC-20 provides three storage drawers for separated storage of clamps, jigs and hand tools, while the top compartment with protective pad keeps sensitive gauges and finishing tools cushioned. With clearly defined storage locations, setup and changeover times are shortened, contributing to a steadier production flow and measurable efficiency gains on the shop floor. Small footprint, flexible placement for any bench With a cabinet size of 460 x 370 x 860 mm (W x D x H) and a manageable mass of 30.25 kg, this freestanding rack is suited to confined workshop spaces and versatile positioning. The compact dimensions allow the unit to sit beside grinders, workbenches or finishing stations without consuming excess floor area; the freestanding design eliminates the need for permanent fixtures and enables rapid reorganisation of the workspace as tasks change, supporting agile workshop layouts. Ready-to-use storage that protects precision instruments Delivered supplied assembled, the rack arrives ready to integrate into daily operations, avoiding downtime from on-site setup. The dedicated storage area with protective pad reduces the risk of surface damage to precision instruments and gauges during storage, while the multiple drawers enable separation of delicate measuring tools from heavier accessories. This combination of protective storage and immediate usability supports longer tool life and fewer replacement costs over time. Practical workshop partner from a known brand Designed as a versatile accessory for universal knife grinders, the cabinet complements existing grinding and sharpening equipment with a purpose-built storage solution. Manufactured by Vertex, the unit aligns with workshop needs for durable, straightforward storage that emphasises practicality over complexity. Choosing a compact tooling rack of this kind supports consistent working standards and helps maintain order in environments where accuracy and tool availability matter. Contact Metav Werkzeuge for tailored advice on integrating the Vertex VTC-20 into the workshop; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: VTC-20 GTIN: 4061905095115 ECLASS: 21059113 Dimensions & weight Cabinet size: 460 x 370 x 860 mm (W x D x H) Weight: 30.25 kg Features & scope Freestanding tooling rack Three storage drawers Storage area with protective pad Supplied assembled; 1-pack Accessory for universal knife grinders FAQ What is the primary purpose of this tool cabinet? The VTC-20 is intended as a freestanding tooling rack and accessory for universal knife grinders, offering organised storage for clamps, gauges and workshop tools. Are the drawers and top storage suitable for precision gauges? Yes — the VTC-20 includes three storage drawers and a padded top area designed to protect precision gauges and delicate instruments during storage. Is the unit delivered ready for use? The unit is supplied assembled and packaged as a single item, so it is ready for immediate placement and use upon arrival. What are the exact dimensions and weight of the cabinet? Cabinet dimensions are 460 x 370 x 860 mm (W x D x H) and the weight is 30.25 kg. Can the cabinet be positioned anywhere in the workshop? The freestanding design allows flexible placement beside grinders, benches or finishing stations without the need for permanent installation. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
4650 N Hold Force Horizontal Base Push‑Rod Clamp 4.5 kN Thrust, Black Oxide Finish - Kukamet
Take advantage of the combination of high clamping and holding forces, compact weight and straightforward fixture integration to keep production lines secure and precise. The horizontal foot and M10x70 pressure spindle enable fast mounting and fine adjustment. Order the push-rod clamp directly via Metav Werkzeuge or ask our consultants if needed. Push-rod clamp 511 — Kukamet horizontal-foot clamp with 4,500 N clamping force The Push-rod clamp 511 is a compact horizontal push-rod clamp for secure workholding in jigs and fixtures across general workshop and production applications Horizontal-foot mounting for stable installation Clamping force 4,500 N and holding force 4,650 N M10x70 pressure spindle for fine adjustment Blackened finish for corrosion resistance Consistent, measurable clamping performance for production environments The push-rod clamp delivers a reliable clamping force of 4,500 N and a holding force of 4,650 N, values that support repeatable part retention in fixtures and jigs. Specifying forces in newton values allows straightforward comparison with other clamping elements and ensures that the clamping device meets process requirements for repeatability and safety. The compact mass of 1.07 kg reduces inertia in moving fixtures and simplifies handling during assembly, while the solid mechanical design translates to fewer process interruptions and less rework. Precise adjustment and easy integration reduce setup time A M10x70 pressure spindle is fitted to provide stepless adjustment of the clamping travel and force, enabling accurate positioning of the clamping face in diverse fixture geometries. The horizontal-foot mounting type permits direct attachment to machine tables or fixture plates without additional adapters, shortening installation time. The blackened finish offers basic surface protection and reduces glare in illuminated workstations, supporting consistent operator feedback during manual set-up. Technical expressions such as clamping and holding force are provided here to enable correct specification and to avoid undersizing or overspecifying the clamping element. Durable workshop design and supplier assurance for long-term use Manufactured by Kukamet and listed as SKU B511-6, the unit is designed for frequent use in workshop and light-industrial settings where dependable retention and quick fixture cycles are required. The straightforward construction minimises maintenance needs and facilitates routine inspection of wear parts. For buyers who prioritise supplier transparency and reliable European distribution, the product is offered through Metav Werkzeuge, which maintains a broad stock range and acts as a quality filter for the market, helping to secure uninterrupted supply chains. Contact Metav Werkzeuge for a specification check and delivery options from Emmerich: eMail info@metav-werkzeuge.com or phone +49 2822 7131930 to confirm suitability for planned fixtures and production runs Technical data SKU: B511-6 GTIN: 8680731503890 Model: 511 Facts Clamping force max: 4,500 N Holding force max: 4,650 N Weight: 1.07 kg Pressure spindle: M10x70 Special features Mounting: horizontal foot Finish: blackened Material/finish: blackened Special features: none FAQ What maximum clamping and holding forces does the clamp provide? The Kukamet push-rod clamp 511 (SKU B511-6) provides a clamping force of 4,500 N and a holding force of 4,650 N. How is the clamp adjusted to suit different workpieces? Adjustment is via the M10x70 pressure spindle fitted to the unit; the spindle allows stepless regulation of clamping position and force for precise set-up with the Push-rod clamp 511. What mounting method is required for fixture integration? The unit uses a horizontal foot mounting, enabling direct attachment to machine tables or fixture plates without special adapters for the Kukamet B511-6. Is the surface treated for workshop durability? Yes, the clamp features a blackened finish that offers basic corrosion protection and reduced surface glare in illuminated work areas. What is the weight and handling implication for fixture design? The clamp weighs 1.07 kg; its low mass helps with manual assembly and reduces added inertia in moving fixtures when integrating the Kukamet 511. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
46mm 10mm Reduction Bushing Hardened And Ground For Drill Bar Holder Form E - TECWERK
Reliable alignment and durable clamping result from the hardened and ground finish combined with the precise 10 mm bore and 25 mm outer diameter; the sleeve integrates cleanly with Form E2 toolholders for faster set-ups. Order the TECWERK reduction bushing directly via Metav Werkzeuge or ask our consultants if needed. TECWERK Reduction Bushing Form 1 — 10 mm Bore, 25 mm Outer Diameter TECWERK Reduction Bushing Form 1 provides a hardened, ground interface for secure clamping in production and workshop environments, optimised for use with Form E2 drill shank holders. Hardened and ground finish For Form E2 drill shank holders Inner bore 10 mm Outer diameter 25 mm Accurate clamping for consistent holemaking The reduction bushing is finished hardened and ground to reduce runout and wear at the clamping interface. With its 10 mm inner bore and a 25 mm outer diameter, the component offers a tight fit that promotes precision during drilling operations. A ground surface minimises micro-movements between sleeve and holder, which translates into improved hole quality and reduced rework. For workshops that require repeatable results across small and medium batch runs, the sleeve supports consistent concentricity when used in the appropriate toolholder. Fast integration with existing toolholder systems Designed for direct integration with Form E2 drill shank holders, the sleeve’s geometry — including the 46 mm clamping length — streamlines assembly and shortens set-up time. The defined interface ensures secure seating in the holder and reliable transfer of cutting loads, helping to maintain tool alignment under working conditions. This compatibility reduces adapter variants on the workbench and simplifies tool inventory management while maintaining process stability in production environments. Built for durability and dependable workshop use Manufactured to meet workshop demands, the component focuses on long-term service rather than frequent replacement. The combination of a hardened finish and precision grinding improves resistance to wear in repetitive drilling tasks, supporting uptime and predictable maintenance cycles. Where a compact, robust adapter is required to adapt smaller shank drills to larger holders, this solution provides a technically sound, low-complexity option that helps sustain machining quality across multiple operations. Contact Metav Werkzeuge for tailored advice on integrating the TECWERK reduction bushing into existing Form E2 systems and to request availability from Emmerich's quality-filtered stock Technical data Article number: 2000834203NW Label: Reduzierbuchse Form 1 Bohrungs-D.10mm AD 25mm Einspann-L.46mm TECWERK Product type: Reduction bushing Form: 1 Manufacturer: TECWERK Packaging unit: 1 Facts Inner bore: 10 mm Outer diameter: 25 mm Clamping length: 46 mm Special features Hardened and ground For drill shank holder Form E2 FAQ What toolholder is this reduction bushing compatible with? This TECWERK reduction bushing is designed for use with Form E2 drill shank holders and seats into the matching interface to provide a secure connection. What are the key dimensions to check before ordering? Check the 10 mm inner bore, 25 mm outer diameter and 46 mm clamping length to ensure correct fitment with the existing holder and tool shank. How does the hardened and ground finish benefit machining? The hardened and ground finish reduces wear and improves concentricity at the clamping point, supporting consistent hole quality and longer service life of the adapter. Can this sleeve be used for high-volume production? The sleeve is suitable for repetitive operations where a robust, low-maintenance adapter is required; its finish and fitment promote repeatability in production environments. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com