Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
46mm 12mm Bore Reducer Sleeve For Boring Bar Holder Form E Hardened And Ground - TECWERK
Robust, hardened and ground construction combined with a precise 12 mm bore and a 46 mm clamping length provides stable, repeatable clamping for drill-bar assemblies; order the reducing sleeve directly via Metav Werkzeuge or consult our specialists for application advice TECWERK Reducing sleeve Form 1 — 12 mm bore, 25 mm outer diameter, 46 mm clamping length The Reducing sleeve Form 1 is a precision clamping insert for drill-bar holders, designed to secure 12 mm shanks in assemblies with a 25 mm outer diameter while maintaining axial accuracy and repeatable positioning Hardened and ground for long service life 12 mm internal bore for precise seating 25 mm outer diameter to suit Form E2 holders 46 mm clamping length for secure engagement Durable engineering for repeatable clamping results The sleeve is manufactured hardened and ground, a finish that reduces wear and maintains concentricity over repeated cycles. This robustness translates into fewer tool changes and more predictable machining outcomes, which benefits production planning and reduces unplanned downtime. With a 12 mm bore matched to standard drill-bar sizes, the component provides a close fit that minimises runout and supports consistent hole quality in series work. Straightforward compatibility that speeds setup Designed specifically for holders with a 25 mm outer diameter and compatibility with Form E2 clamping systems, the component simplifies tool selection and reduces the need for additional adaptors. The standardised outer diameter ensures predictable engagement in common holders, while the precision finish enables stable axial alignment. For workshops aiming to streamline changeovers, this compatibility reduces set-up time and helps maintain process integrity across different operators. Secure grip and shorter rework cycles A 46 mm clamping length gives extended contact area between sleeve and holder, improving axial stability and reducing the risk of slippage under load. Longer engagement promotes even distribution of clamping forces, which in turn limits deformation of the tool shank and helps preserve cutting geometry. The result is fewer rejects and lower rework rates, particularly in repetitive drilling tasks where consistency is essential. Practical choice for workshop and production environments Selecting a hardened, ground reducing sleeve supports a rational workflow: less wear, predictable performance and straightforward integration into existing clamping systems. Combined with Metav’s supply reliability and technical advice, this option is intended for technicians and purchasers who prioritise precision, repeatability and a durable component life. Metav Werkzeuge’s inventory and expertise contribute to dependable availability and clear technical guidance for implementation. Contact Metav Werkzeuge for tailored advice on the TECWERK reducing sleeve and reliable supply from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 2000834204NW Product: Reducing sleeve (Form 1) Brand: TECWERK Form: 1 Packaging unit: 1 Facts Internal bore (d1): 12 mm Outer diameter (d): 25 mm Clamping length (L): 46 mm Special features Hardened and ground finish For drill-bar holders Form E2 Precise seating for 12 mm shanks FAQ Is this reducing sleeve compatible with Form E2 holders? The TECWERK Reducing sleeve Form 1 (SKU 2000834204NW) is specified for use with drill-bar holders of Form E2, the 25 mm outer diameter ensuring correct engagement in compatible holders What are the exact dimensions of the sleeve? The reducing sleeve (TECWERK, 2000834204NW) has an internal bore of 12 mm, an outer diameter of 25 mm and a clamping length of 46 mm How does the hardened and ground finish affect performance? The hardened and ground surface of the TECWERK Reducing sleeve Form 1 improves wear resistance and maintains concentricity, which reduces runout and supports consistent hole quality over prolonged use How should the sleeve be installed in the holder? Install the TECWERK reducing sleeve by seating it concentrically into the Form E2 holder until fully engaged, then clamp the drill bar to the specified torque to ensure stable axial retention Why is the 46 mm clamping length important? A 46 mm clamping length on the TECWERK reducing sleeve Form 1 increases contact area for better axial stability, reducing slippage and helping to preserve cutting geometry during repetitive drilling Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
46mm 16mm Bore Reducer Bush Form 2 Hardened And Ground, For Drill Bar Holder Form E - TECWERK
Take advantage of the combination of a hardened and ground finish, precise 16 mm internal bore and a compact 46 mm clamping length for reliable concentricity and long service life. Order the reducing sleeve directly via Metav Werkzeuge or consult the technical team for configuration assistance. TECWERK Reducing Sleeve (Form 2) – 16 mm internal bore, 25 mm outer diameter The TECWERK Reducing Sleeve (Form 2) is a purpose-built clamping insert for drill rod holders Form E 2, designed to adapt smaller shank tools to larger holders while maintaining alignment and stability in machining operations. Hardened and ground finish 16 mm internal bore 25 mm outer diameter Clamping length 46 mm Improved runout control for consistent results The precisely finished insert offers a hardened and ground contact surface that supports stable seating in the holder, which contributes directly to improved concentricity of the tool assembly. By keeping the centreline alignment tight, the sleeve helps reduce vibration and tool deflection during drilling or turning operations. This engineered fit is particularly valuable where repeatable accuracy is required across series production or when retrofitting smaller shank tooling into existing setups. Robust clamping length for secure tool retention With a clamping length of 46 mm, the component provides a reliable engagement zone that balances axial support with compact installation dimensions. The extended engagement reduces the risk of slippage under load and improves transfer of torque from holder to tool, enhancing wear resistance and prolonging the service interval of both sleeve and tooling. The result is fewer interruptions for adjustment and a steadier production flow on the shop floor. Straightforward compatibility to simplify tooling decisions Engineered for use with drill rod holder Form E 2, the sleeve’s 16 mm internal bore and 25 mm outer diameter are clearly defined so compatibility checks are quick and verifiable. The simple geometry allows for rapid interchangeability and inventory management, reducing tool-up times and lowering the number of adapter parts required in a tooling cabinet. Clear specification minimises the risk of mismatch and supports efficient workshop logistics. Contact Metav Werkzeuge for application advice or to confirm fitment details; technical support is available by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 2000834205NW Label: Reduzierbuchse Form 2 Bohrungs-D.16mm AD 25mm Einspann-L.46mm TECWERK Manufacturer: TECWERK Packaging unit: 1 Core dimensions Internal bore d1: 16 mm Outer diameter OD: 25 mm Clamping length L: 46 mm Form: 2 Features Hardened and ground For drill rod holder Form E 2 Product type: Reducing sleeve SKU/UID: 2000834205NW FAQ What is the internal bore of the reducing sleeve? The internal bore is 16 mm, which is specified for compatibility with smaller shank tools requiring adaptation to larger holders. Which holder type is this sleeve intended for? The sleeve is designed for use with drill rod holder Form E 2 and provides a precise fit to maintain alignment in that system. How long is the clamping length and why does it matter? The clamping length is 46 mm; this axial engagement enhances tool retention and torque transfer, reducing the risk of slippage during machining. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
46mm 3.0-16mm Quick-Change Drill Chuck Self-Tightening With 1/2”–20 Thread, Right-Hand - RÖHM
Take advantage of a secure, self-tightening chuck with a wide 3.0–16 mm clamping range and a standard 1/2"-20 mount for straightforward integration into workshop spindles; the light-duty design keeps handling simple while ensuring reliable bit retention for routine drilling tasks. Order the RÖHM Supra S via Metav Werkzeuge or consult our specialists for suitability checks. RÖHM Supra S Keyless Drill Chuck 3.0–16 mm, 1/2"-20 The RÖHM Supra S is a light-duty, self-tightening keyless drill chuck designed for right-hand rotation and intended for workshop and maintenance drills Self-tightening operation for secure hold Clamping range 3.0–16 mm 1/2"-20 threaded mount Light-duty construction, 46 mm outer diameter Precision hold for consistent drilling results A wide clamping range of 3.0–16 mm enables use with a variety of drill bits and accessories without repeated chuck changes. The self-tightening mechanism increases axial grip as torque rises, which reduces slippage under load and improves hole quality; this technical behaviour makes the chuck particularly effective for repetitive, medium-duty applications. The result is fewer interruptions and a more predictable process flow in everyday workshop operations. Fast installation and spindle compatibility The chuck mounts via a 1/2"-20 internal thread, a common interface for many hand-held and light bench drills, which simplifies retrofitting and reduces downtime when replacing worn or unsuitable chucks. Specified for right-hand rotation, the assembly matches standard drilling directions and avoids unintended reverse loading. Clear interface standards mean compatibility checks are straightforward and integration into existing tooling setups is efficient. Compact form and straightforward maintenance With an outer diameter of 46 mm, the chuck offers a compact footprint that suits confined toolheads and handheld devices while still providing a robust grip surface. The light-duty classification keeps mass low for easier handling and faster bit changes, which benefits frequent tool swaps. Basic care—regular cleaning of the jaws and lubrication of the screw thread—preserves performance and extends service life without complex maintenance procedures. Best uses and application fit Engineered for workshops, maintenance teams and small-scale production environments, this keyless chuck supports common drilling tasks where reliability and quick tool changes matter most. Its design balances convenience and functional grip, making it well suited to repair jobs, assembly work and general fabrication where heavy-duty industrial chucks are not required. The chuck delivers practical benefits for workshop workflows and helps keep operations moving smoothly. Contact Metav Werkzeuge to discuss the RÖHM Supra S for your workshop requirements and arrange delivery; technical advisers are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 4000832217NW Label: Schnellspannbohrfutter Supra S Spann-D.3,0-16mm 1/2Zoll-20mm f.Re.-Lauf RÖHM Manufacturer: RÖHM Facts Clamping range: 3.0–16 mm Mount: 1/2"-20 (internal thread) Outer diameter: 46 mm Packaging unit: 1 Special features Self-tightening Light-duty version With internal thread For right-hand rotation FAQ What clamping range does the chuck cover? The chuck covers a 3.0–16 mm clamping range, which permits use with a broad selection of common drill bits and small accessories. Is the mount compatible with standard drill spindles? Yes, the chuck uses a 1/2"-20 internal thread mount, making it compatible with many hand-held and light bench spindles that accept this standard. Can this chuck be used on reversible drills? The construction is specified for right-hand rotation; use on reversible machines should respect this direction to ensure the self-tightening behaviour remains effective. How does the self-tightening feature improve performance? The self-tightening action increases jaw grip with applied torque, reducing the risk of slippage and improving drilling consistency during medium-duty tasks. Is the Supra S suitable for heavy industrial use? The Supra S is a light-duty keyless chuck optimised for workshops and maintenance work rather than heavy industrial machining that demands specialised heavy-duty chucks. Manufacturer: RÖHM; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
46mm 3.0-16mm Quick-Change Drill Chuck, Self-Clamping, Internal Thread, Right-Hand - RÖHM
Take advantage of a reliable combination of self-tightening clamping and a broad 3.0–16 mm range for consistent drill performance; the light-duty design and internal 5/8"-16 thread simplify installation and minimise downtime. Order the RÖHM Supra S keyless drill chuck directly via Metav Werkzeuge or ask our consultants if needed. RÖHM Supra S keyless drill chuck — 3.0–16 mm clamping range, 5/8"-16 internal thread, self‑tightening The Supra S keyless drill chuck by RÖHM is a light‑duty, self‑tightening chuck with an internal 5/8"-16 connection designed for clockwise (right‑hand) rotation in machining and drilling applications Self‑tightening for secure clamping Clamping range 3.0–16 mm Internal 5/8"-16 thread for direct mounting Compact design with 46 mm outer diameter Reliable clamping that reduces slippage and rework A self‑tightening mechanism converts torque into axial clamping force so that the drill bit remains secure under load; this reduces the risk of slippage and improves hole quality. With a 3.0–16 mm clamping range, the chuck covers a wide span of common drill sizes, eliminating frequent tool changes. The result is a steadier production flow and fewer interruptions for repositioning, which benefits workshops and light industrial users seeking consistent, measurable results. Easy mounting and assured compatibility with standard spindles Designed with an internal 5/8"-16 thread, the chuck mounts directly to compatible spindles without additional adapters, saving assembly time. The compact 46 mm outer diameter keeps the tool head slim for better access in confined setups. Specified for right‑hand (clockwise) rotation, the unit is optimised for conventional drilling machines and ensures predictable behaviour during operation. Clear technical matching avoids costly ordering errors and shortens machine setup. Light‑duty design for faster tool changes and ergonomic handling The light‑duty construction supports frequent tool changes while keeping handling comfortable for operators. Because the chuck is keyless, tightening and releasing bits can be performed quickly, increasing uptime in serial or workshop tasks. This simplified handling contributes to operational efficiency and a smoother workflow without compromising the essential clamping performance expected in everyday drilling tasks. Contact Metav Werkzeuge for tailored advice on the RÖHM Supra S keyless drill chuck and to arrange fast delivery from our Emmerich warehouse Technical data SKU: 4000832218NW Model: Supra S Product type: Keyless drill chuck Brand: RÖHM Clamping range: 3.0–16 mm Arbor / thread: 5/8"-16 Rotation direction: Right‑hand (clockwise) Version: Light‑duty, self‑tightening, with internal thread Outer diameter: 46 mm Packaging unit: 1 UID: 4000832218NW Numbers / Core technical data Clamping range (mm): 3.0–16 Outer diameter (mm): 46 Arbor thread: 5/8"-16 Packaging unit: 1 Special features / Designs Self‑tightening mechanism Light‑duty execution Internal thread for direct mounting Intended for right‑hand rotation FAQ What drill bit sizes does the chuck accept? The chuck accepts drill shanks within the 3.0–16 mm clamping range; the self‑tightening mechanism secures bits across that span. How is the chuck mounted to a spindle? Mounting is via an internal 5/8"-16 thread, allowing direct attachment to compatible spindles without an adapter. Is this chuck suitable for heavy industrial drilling? The Supra S is a light‑duty and self‑tightening design; it is intended for workshop and lighter industrial applications rather than heavy‑duty machining. Does the chuck support left‑hand rotation? This chuck is specified for right‑hand (clockwise) rotation; use in the opposite direction is not advised. Can the chuck be used without a tightening key? Yes — the keyless configuration provides quick bit changes and relies on the self‑tightening action for secure clamping. Manufacturer: RÖHM; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
46mm 8mm Reduction Sleeve Hardened And Ground For Drill Rod Holder Form E25 - TECWERK
Take advantage of a compact, precision-fit solution that combines hardened and ground finishing with exact nominal dimensions for reliable clamping performance; order directly via Metav Werkzeuge or consult their specialists for application support. Reduction sleeve Form 1 — bore Ø 8 mm, outer Ø 25 mm, clamping length 46 mm — TECWERK The reduction sleeve Form 1 is a slim, hardened bushing designed to adapt smaller drill rods to larger holders in precision clamping assemblies, ideal for workshop and light production use. Hardened and ground for consistent concentricity Compatible with Form E2 drill rod holders Bore Ø 8 mm, outer Ø 25 mm, clamping length 46 mm Precision fit for workshop and production use Precise adaptation for drill rod assemblies The reduction sleeve Form 1 is engineered to provide a precision interface between a smaller-diameter drill rod and a larger holder, reducing radial runout and improving repeatability in machining tasks. By offering a true running fit with defined internal and external diameters, the component ensures stable tool clamping and predictable cutting results. This measurable accuracy contributes to fewer rejects and less rework in serial operations, supporting efficient production flow. Durability from hardened and ground workmanship Manufactured hardened and ground, the sleeve resists early wear and maintains tight tolerances under regular clamping cycles. The heat treatment and surface finish reduce deformation risk during assembly and disassembly, extending service life and lowering lifetime replacement frequency. For environments where concentricity and longevity matter, this treatment translates directly into fewer tool changes and steadier machining performance. Clear dimensional specification reduces setup time With a defined internal diameter of Ø 8 mm, external diameter of Ø 25 mm and 46 mm clamping length, the sleeve provides predictable mechanical engagement and repeatable axial support. These dimensions simplify fixture planning and inventory management: the nominal values allow straightforward selection for compatibility checks with Form E2 holders and existing tool sets. The physical clarity of the component accelerates changeover and reduces the need for additional measuring or rework during installation. Suitable for workshops and light production environments Designed for practical use in workshops and small-batch production, the reducing bushing combines compact design with industry-oriented performance. The form factor and finish support consistent clamping in drilling and similar operations, where stability and concentricity are required but full heavy-duty tooling is not needed. For purchasers seeking dependable components that integrate easily into existing clamping systems, this option delivers both reliability and straightforward handling. For application advice or specification matching, Metav Werkzeuge consultants can provide detailed guidance. For reliable clamping performance, request the TECWERK reduction sleeve via Metav Werkzeuge — their consultants in Emmerich can advise on compatibility and supply the part to suit existing holders Technical data Article number: 2000834202NW Product: Reduction sleeve Form 1 Manufacturer: TECWERK Packaging unit: 1 Dimensions and core data Bore diameter d1: 8 mm Outer diameter d: 25 mm Clamping length L: 46 mm Form: 1 Features / Applications Hardened and ground For drill rod holders Form E2 Precision clamping applications FAQ What are the exact dimensions of the sleeve? The TECWERK reduction sleeve (SKU 2000834202NW) has an internal bore of 8 mm, an outer diameter of 25 mm and a clamping length of 46 mm. Is the sleeve heat treated? Yes; the sleeve is hardened and ground, providing improved wear resistance and dimensional stability. Which holders is the sleeve compatible with? Compatibility is specified for Form E2 drill rod holders; the part is intended to adapt smaller tool shanks to that holder standard. How is the sleeve typically used in production? The sleeve is used to adapt drill rods for stable clamping, improving concentricity and repeatability in drilling and light machining operations. What is the packaging unit for this item? The item is supplied as a single unit (packaging unit: 1). Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
46mm Clamping Length Reducer Bushing 6mm Bore, Hardened And Ground, For Boring Bar Holder Form E 2 - TECWERK
Take advantage of a hardened and ground construction combined with precise dimensional control (6 mm bore, 25 mm outer diameter and 46 mm clamping length) to ensure reliable concentricity and long service life in clamping applications; order via Metav Werkzeuge or consult the technical team for compatibility checks. Reducing sleeve Form 1 — 6 mm bore, 25 mm outer diameter (TECWERK) Reducing sleeve Form 1 is a hardened, ground reduction bushing for precise clamping in compatible drill shank holders, designed to secure 6 mm tool shanks with consistent alignment *Hardened and ground finish for repeatable accuracy *6 mm internal bore for precise 6 mm shanks *25 mm outer diameter for Form E2 holders *46 mm clamping length for stable retention Precision that reduces setup time and rejects A hardened and ground reduction bushing offers a reliable means to maintain tool concentricity and repeatability across repeated setups. By providing a true bore surface and consistent interface, the component minimises runout and contributes to extended tool life and fewer rejected parts. In production environments where repeatability is critical, the combination of accurate internal diameter and careful finishing reduces measurement uncertainty and the need for frequent re-adjustment, supporting a smoother workflow. Secure clamping for consistent machining results The 46 mm effective clamping length delivers stable clamping and improved axial engagement, which in turn reduces vibration and chatter during machining. With a defined 6 mm internal diameter, the sleeve centres standard 6 mm shanks precisely, enabling predictable cutting behaviour and consistent surface finish. These attributes translate into fewer process interruptions and a higher first-pass yield when machining or drilling operations demand tight tolerances. Simple integration with Form E2 holders and modular tool systems Designed for use with drill shank holders of Form E2, the sleeve’s 25 mm outer diameter ensures straightforward fitting into the specified holder standard. This compatibility supports modular tool setups and quick interchangeability between different toolholders and inserts. The clear dimensional definition — 6 mm bore, 25 mm outer diameter, 46 mm clamping length — allows engineering teams to plan fixtures and tool stacks with confidence and reduces time spent verifying fit. Reliable supply and pragmatic workshop benefits Supplied by TECWERK and distributed through Metav Werkzeuge, the part emphasises practical workshop benefits: reduced set-up complexity, repeatable positioning and a durable finish that withstands routine handling. For operations seeking to standardise tooling interfaces, the reduction bushing functions as a compact, durable element that simplifies inventory management and supports predictable maintenance intervals. Technical queries regarding fit, holder compatibility or application specifics can be addressed through Metav’s advisory channels. For application advice or availability of this hardened and ground reducing sleeve from TECWERK, contact Metav Werkzeuge for tailored guidance and rapid clarification via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 2000834201NW Description: Reducing sleeve Form 1, 6 mm bore, 25 mm outer diameter, 46 mm clamping length Manufacturer: TECWERK Facts Form: 1 Bore diameter: 6 mm Outer diameter: 25 mm Clamping length: 46 mm Packaging unit: 1 Special features hardened and ground for drill shank holders Form E2 suitable for precise clamping of 6 mm shanks FAQ What are the core dimensions of the reducing sleeve? The reducing sleeve has a 6 mm internal bore, a 25 mm outer diameter and a 46 mm clamping length (SKU 2000834201NW), which define its fitting and retention characteristics. Is the sleeve compatible with Form E2 holders? Yes, the component is specified for use with drill shank holders of Form E2 and is designed to fit that holder standard. What finish does the part have and why does it matter? The sleeve is hardened and ground, a finish that improves wear resistance and ensures the bore maintains concentricity and minimises runout in repeated clamping cycles. Can this sleeve be used for non-standard shank diameters? The sleeve is dimensioned for a 6 mm internal diameter; for different shank sizes, an appropriately sized reduction bushing should be selected to maintain clamping accuracy. Is the material composition listed for the sleeve? Material composition is not specified in the provided data; the available information confirms the sleeve is hardened and ground but does not state the base material. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
46mm Drive Collar For Clamping Arbor 27mm Cutter Slot, 12mm Axial/12mm Radial/6.3mm Height - TECWERK
Take advantage of a standardised, DIN 6366-compliant ring that transmits torque cleanly to cutters with a transverse key; its compact dimensions (fits a 27 mm arbor with 46 mm outer diameter and 6.3 mm engagement) support fast, repeatable setups on mounted cutter arbors. Order the part directly via Metav Werkzeuge or request compatibility advice from our consultants. Drive ring for 27 mm arbor (Mitnehmerring) — DIN 6366, 46 mm outer diameter (TECWERK) Drive ring for 27 mm arbor designed to transmit torque to mounted cutters with a transverse key, suitable for use with mounted cutter arbors and compliant with DIN 6366 DIN 6366-compliant drive ring For cutters with transverse keyway Fits 27 mm arbor, 46 mm outer diameter Robust 6.3 mm engagement height Secure torque transmission for mounted cutters A standardised DIN 6366 design ensures the ring provides reliable, repeatable torque transfer to cutter bodies that have a transverse key. By engaging the keyway directly, the drive ring reduces rotational play and improves machining consistency, which translates into fewer rejects and less time spent on rework. This functional clarity makes the component an efficient choice for production environments where secure drive engagement matters. Compact dimensions that simplify integration With an outer diameter of 46 mm and a bore for a 27 mm arbor, the component fits neatly into common mounted cutter arbor assemblies. The specified 6.3 mm engagement height and matching shoulder measurements (a and b at 12 mm) permit secure seating without excessive bulk, enabling machines to retain their original clearance and balance. These compact dimensions help to shorten setup time and allow straightforward replacement in existing tool holding systems. Clear specifications to support procurement and inventory The part's concise technical specification removes ambiguity during procurement: standard compliance, intended use for cutters with a transverse key, and explicit dimensional values allow purchasing managers and toolroom planners to order the correct item with confidence. The fixed design lowers the risk of incorrect variants entering the tool cabinet and helps to maintain steady production flow through predictable interchangeability and straightforward stock keeping. For supply queries or compatibility checks on the TECWERK drive ring, contact Metav Werkzeuge in Emmerich for prompt advice and reliable delivery to the workshop bench. Technical data Article number: 2000834088NW Label: Drive ring for 27 mm arbor (Mitnehmerring) Manufacturer: TECWERK Dimensions d: 27 mm D: 46 mm a: 12 mm b: 12 mm h: 6.3 mm Packaging unit: 1 Special features DIN 6366-compliant For cutters with transverse keyway Suitable for mounted cutter arbors FAQ Which arbor diameter does this drive ring fit? The drive ring fits a 27 mm arbor and is specified for use with mounted cutter arbors; reference SKU 2000834088NW for ordering. What standard does the ring conform to? The component is compliant with DIN 6366, which defines form and function for this style of drive engagement. What are the key dimensions of the part? Key dimensions: bore d = 27 mm, outer D = 46 mm, a = 12 mm, b = 12 mm, engagement height h = 6.3 mm. How does the ring secure the cutter on the arbor? The ring engages the cutter’s transverse keyway so torque is transmitted directly through the key engagement and the specified 6.3 mm engagement height ensures consistent mechanical contact. Manufacturer / Responsible: NORDWEST Handel AG; Robert-Schuman-Straße 17; 44263 Dortmund
46mm Precision Boring Bar Holder E2 S Slotted, Through‑Bored DIN 69880 VDI30 - TECWERK
Take advantage of precise VDI30 clamping, a through-drilled Type A shank for coolant and adjustment, and a slotted wrap‑around design that reduces vibration for steadier bore finishing; order the holder directly via Metav Werkzeuge or consult our specialists for integration support. TECWERK Tool Holder VDI30, Form E2 S — Type A, 12 mm clamping The TECWERK tool holder E2 S is a VDI30 clamping solution designed to secure 12 mm boring bars with reliable concentricity, coolant capability and improved vibration damping for stable internal boring operations VDI30 shank, Form E2 S Through-drilled shank for coolant and adjustment Slotted wrap-around design reduces vibration Retaining ring prevents holder falling into turret Clamping diameter d2 12 mm for boring bars Consistent concentricity for predictable bore quality The E2 S clamping arrangement on this holder provides repeatable concentricity when used with VDI30 spindles, which directly supports tighter bore tolerances and reduced rework. The combination of a defined shank interface and a 12 mm clamping bore (d2) ensures that short boring bars remain stable during cutting cycles; operators will notice fewer runout-related defects and improved surface finish. Compatibility with the DIN 69880 standard simplifies integration into existing turret and spindle systems. Reduced vibration for longer tool life and higher surface quality The slotted, wrap‑around construction is engineered to dampen vibration by embracing the boring bar rather than relying on a single clamping point. This geometry lowers chatter, which not only improves surface integrity but also extends the life of solid carbide and indexable inserts used in finishing passes. Slotted-zone specifications guide application: up to 16 mm at 4×D, 20 and 25 mm at 3×D, and from 32 mm at 2.5×D, helping planners select the correct bar length and depth of cut for stable machining. Coolant-ready and turret-safe for flexible shop workflows As a Type A through-drilled holder, the shank allows both internal and external coolant supply and enables length adjustment from the shank side where the bore is through. The design also includes a retaining ring to prevent the holder from falling into the turret, supporting uninterrupted automated tool changes. These features make the component suitable for demanding production environments where coolant management and secure tool retention are essential for cycle reliability. Straightforward standardisation and workshop integration Conformance to DIN 69880 and the VDI30 interface simplifies procurement and reduces setup time across multi‑machine shops. The holder’s measurable data — D 46 mm, d1 30 mm, overall L 95 mm and working L1 73 mm — allows straightforward verification against existing tool lists and fixture designs. The component is intended for use with boring bars, including full‑round bars with a V‑groove, and is manufactured for compatibility with common turret and spindle tool systems. If further clarification is required on suitability for particular boring bars or machining tasks, technical drawings or application examples can be provided; for detailed enquiries contact info@metav-werkzeuge.com or call +49 2822 7131930. Contact Metav Werkzeuge for tailored advice on integrating this TECWERK VDI30 tool holder into production and benefit from our Emmerich quality filter and stocking expertise Technical data Article number: 2000833473NW Manufacturer: TECWERK Product type: Tool holder for boring bars Standard: DIN 69880 Dimensions / core data Diameter (D): 46 mm Clamping diameter (d2): 12 mm Shank diameter (d1): 30 mm Overall length (L): 95 mm Working length (L1): 73 mm Form: E2 S Type: A Through-drilled: yes Special features Slotted wrap-around design reduces vibration Suitable for full-round boring bars with V-groove Slotted zone: up to 16 mm = 4×D; 20/25 mm = 3×D; ≥32 mm = 2.5×D External and internal coolant possible Length adjustment from shank side Secured by retaining ring Compatible with VDI30 tooling systems FAQ What is the clamping diameter of this holder? The clamping diameter (d2) of this TECWERK tool holder is 12 mm, intended for 12 mm boring bars. Can coolant be supplied through the holder? Yes, the Type A through-drilled shank on the holder enables internal coolant routing; external coolant can also be used. Is this holder suitable for full-round boring bars? The slotted wrap-around design is suitable for full-round boring bars with a V‑groove, improving grip and vibration control. How does the retaining ring improve turret safety? The retaining ring secures the holder against accidental ejection into the turret, ensuring safe automatic tool changes with TECWERK holders. Which standard and interface does the holder use? The holder conforms to DIN 69880 and fits a VDI30 interface, facilitating integration into standard tooling systems. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
46mm Schnellspannbohrfutter Supra S leichte Ausführung selbstspannend für Rechtslauf, Aufnahme B16 - RÖHM
Schnellspannbohrfutter Supra S von RÖHM Schnellspannbohrfutter Supra S – Selbstspannendes Bohrfutter mit B16-Kegelaufnahme für handgeführte Maschinen bei Rechtslauf, ausgelegt auf schnellen Werkzeugwechsel und präzise Bearbeitung von 3–16 mm Bohrern Selbstspannend für schnellen Werkzeugwechsel Spannbereich 3–16 mm Aufnahme B16 mit Kegelaufnahme Geeignet für handgeführte Maschinen und Rechtslauf Außendurchmesser 46 mm Schneller Werkzeugwechsel für produktive Werkstätten Das Schnellspannbohrfutter Supra S reduziert Rüstzeiten durch seine selbstspannende Funktion und ermöglicht so deutlich kürzere Unterbrechungen im Arbeitsablauf. Dank der leichten Ausführung ist das Futter besonders für mobile Einsätze an handgeführten Maschinen geeignet, weil das Gewicht die Handhabung erleichtert. Die Kombination aus schneller Spannmechanik und kompakter Bauform steigert die Produktivität, da Ausfallzeiten beim Wechsel von Bohrern minimiert werden. Präzision im Praxisbetrieb bei variablen Bohrdurchmessern Mit einem Spannbereich 3–16 mm deckt das Futter die gängigsten Bohrerdurchmesser ab und bietet damit Flexibilität für unterschiedliche Anwendungen. Die Aufnahme B16 sorgt für sichere Verbindung zur Maschine, während die Auslegung für Rechtslauf die Kompatibilität mit Standard-Bohrmaschinen gewährleistet. Für Anwender, die wenig Erfahrung mit technischen Begriffen haben: Spannbereich bezeichnet den Bereich der Bohrerdurchmesser, die das Futter aufnehmen kann, und selbstspannend bedeutet, dass das Futter ohne Schlüssel festgezogen werden kann. Kompakte Bauform und robuste Ausführung für den Alltag Die leichte Ausführung mit einem Außendurchmesser 46 mm reduziert die Belastung bei Handarbeiten und verbessert die Balance an der Maschine. Durch die Kegelaufnahme in B16 bleibt die Verbindung stabil, selbst bei hoher Belastung im Rechtslauf. Diese Eigenschaften machen das Futter zu einer praxistauglichen Wahl für Werkstätten, Serviceeinsätze und Montagen, bei denen Ergonomie und Zuverlässigkeit Hand in Hand gehen. Zielgruppe und typische Einsatzbereiche Entwickelt für Handwerk, Montage und Instandhaltung, eignet sich das Supra S besonders für Anwender, die häufig Bohrer wechseln und mobil arbeiten. Typische Einsatzfälle sind Montagearbeiten, mobile Reparaturen und kleinere Fertigungsaufgaben, bei denen schnelle Rüstzeiten und sichere Spannung im Vordergrund stehen. Wer Wert auf einfache Handhabung, Flexibilität im Spannbereich und Kompatibilität mit Standard-Aufnahmen legt, profitiert unmittelbar von den Merkmalen dieses Bohrfutters. Für Anfragen zur Verfügbarkeit oder zur technischen Kompatibilität das Supra S mit B16-Aufnahme bei Metav anfragen und persönliche Beratung per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 einholen Produktmerkmale Artikelnummer: 4000832204NW Marke: RÖHM Produktart: Schnellspannbohrfutter Typ: Supra S Aufnahme: B 16 Fakten Spannbereich: 3-16 mm Außendurchmesser: 46 mm Verpackungseinheit: 1 Besonderheiten selbstspannend leichte Ausführung für handgeführte Maschinen mit Kegelaufnahme (B16) Drehrichtung: Rechtslauf FAQ Ist das Bohrfutter wirklich ohne Schlüssel zu spannen? Das Schnellspannbohrfutter Supra S von RÖHM verfügt über eine selbstspannende Mechanik, die einen schnellen und schlüssellosen Werkzeugwechsel ermöglicht und so Rüstzeiten reduziert. Welche Bohrergrößen lassen sich verwenden? Der Spannbereich von 3–16 mm erlaubt die Nutzung eines breiten Spektrums an spiral- und Stufenbohrern; das RÖHM Schnellspannbohrfutter (SKU 4000832204NW) deckt damit die gängigsten Arbeitsfälle ab. An welche Maschinen passt die Aufnahme? Die Aufnahme B16 ist als Kegelaufnahme ausgeführt und eignet sich für Maschinen mit entsprechender B16-Spannaufnahme; das Futter ist für Rechtslauf ausgelegt. Ist das Futter für mobile Einsätze geeignet? Ja, die leichte Ausführung und der kompakte Außendurchmesser von 46 mm machen das Supra S besonders geeignet für handgeführte Maschinen bei Montage- und Servicetätigkeiten. Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
46mm Supra Heavy-Duty Keyless Drill Chuck 1–13mm B16 Right-Hand - RÖHM
Benefit from the Supra quick‑change drill chuck’s combination of self‑tightening clamping and a 1–13 mm range for consistent, secure drilling in stationary machines; its B16 taper ensures straightforward integration with compatible spindles. Order the unit via Metav Werkzeuge or contact the technical team for clarification and fitment advice. Supra quick‑change drill chuck – B16 taper, 1–13 mm, RÖHM The Supra quick‑change drill chuck is a heavy‑duty, self‑tightening chuck with a B16 taper, engineered for right‑hand rotation in stationary drilling and machining environments. Self‑tightening, heavy‑duty design B16 taper mount for stationary spindles Clamping range 1–13 mm for versatile tooling Designed for right‑hand rotation Secure clamping for reliable machining results The self‑tightening mechanism delivers a secure grip on twist drills and other shank tools across the 1–13 mm clamping range, reducing slippage and improving concentricity. This feature translates into fewer interrupted cycles and less rework on precision holes, which supports predictable throughput in production settings. The heavy‑duty construction of the chuck also contributes to consistent torque transfer, helping to maintain hole quality even under steady loads. Straightforward mounting and machine compatibility Fitted with a B16 taper mount, the chuck integrates directly with spindles designed for this taper size, enabling rapid installation on compatible stationary machines. The compact 46 mm outer diameter suits confined spindle spaces while keeping the tool close to the workpiece for improved rigidity. Specified for right‑hand rotation, the unit matches standard drilling directions used across many workshop and industrial machines and is identified under the RÖHM brand for recognised engineering pedigree. Robust design built for industrial use Produced in a heavy‑duty industrial version, the chuck is designed to withstand continuous operation in workshop and factory environments. The durable build minimises wear on contact surfaces and supports stable clamping forces during repetitive cycles. For operations that prioritise uptime, the chuck’s straightforward mechanical design reduces the probability of vibration‑induced loosening and contributes to longer service intervals, supporting cost‑effective production runs. Practical operation, handling and benefits The chuck’s quick‑change character shortens tool change times compared with conventional keyed chucks, aiding overall process efficiency. With its self‑tightening action and rugged construction, the device reduces the need for frequent retorquing and simplifies routine checks. For precise fitting and to confirm suitability with specific machines and tooling, Metav’s documentation and technical advisers can provide the necessary compatibility information and clarify installation requirements. For reliable, industrial drilling performance with the RÖHM Supra quick‑change drill chuck (B16 taper, 1–13 mm), contact Metav Werkzeuge to confirm spindle compatibility and arrange procurement — Metav’s technical team will advise on the optimal configuration for stationary machines. Technical data Article number: 4000832060NW SKU / UID: 4000832060NW Product type: Quick‑change drill chuck Brand: RÖHM Form: heavy‑duty industrial version Taper mount: B16 Packaging unit: 1 Dimensions & measurable data Clamping range: 1–13 mm Outer diameter: 46 mm Design & special features Self‑tightening Designed for stationary machines With taper mount For right‑hand rotation Quick‑change capability FAQ What clamping range does the chuck cover? The clamping range is 1–13 mm for the Supra quick‑change drill chuck, giving flexibility for a wide range of small to medium shank tools. Which taper does the chuck use and how does it mount? The unit mounts on a B16 taper; the B16 taper ensures direct, secure fitting to spindles designed for that taper. Is the chuck suitable for continuous industrial use? Yes, the heavy‑duty industrial design makes the Supra quick‑change drill chuck suitable for continuous operation in workshop and factory settings. Which rotation direction is required for operation? The chuck is specified for right‑hand rotation and is intended for machines that run in that direction. How does the self‑tightening feature improve drilling accuracy? The self‑tightening action increases clamping force as torque rises, reducing slippage and helping to maintain concentricity during drilling operations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
46mm Tool Holder E2 S for Boring Bars Through‑Bored VDI40 12mm, DIN 69880 - TECWERK
Take advantage of the combination of slotted clamping for vibration reduction, a through‑bored shaft for coolant flexibility and secure retention by a safety ring to maintain consistent tool performance. Order the TECWERK VDI40 toolholder directly via Metav Werkzeuge or consult our specialists for technical clarification and procurement. TECWERK VDI40 toolholder for boring bars — clamping Ø12 mm, Type A A TECWERK VDI40 toolholder designed for slotted clamping of boring bars; suitable for precision turning and boring where reduced vibration and flexible coolant supply are required. Slotted clamping reduces vibration and chatter Through‑bored shaft allows internal coolant Secured by retaining ring, prevents falling out Compatible with VDI40 interface and Ø12 mm bars Improved machining stability through slotted clamping The slotted, E2 S form of the holder provides a controlled wrap around the boring bar, which significantly reduces vibration and chatter during cutting. This mechanical restraint is especially beneficial for long overhangs and finish-critical operations, because fewer vibrations translate directly into better surface integrity and extended insert life. The design is compatible with full‑round bars with a V‑groove as well as notched bars, enabling a consistent clamping force and predictable performance across a range of setups. Flexible coolant routing and accessible length adjustment A through‑bored shaft permits both internal and external coolant supply, improving chip evacuation and cooling at the cutting edge for longer tool life and more stable cutting conditions. The holder also supports length adjustment from the shank side when the shaft is through‑bored, which simplifies setup changes and reduces spindle removal time. For workshops seeking reduced cycle times, the combination of coolant flexibility and accessible adjustment supports higher productivity without compromising machining quality. Secure retention and standardised interface for fast tool changes The holder is delivered with a retaining ring to secure the boring bar and prevent accidental ejection into the turret, enhancing operator safety and machine uptime. With a VDI40 interface and compliance with DIN 69880, the unit integrates seamlessly into standard turret systems, allowing rapid interchangeability. The specified clamping diameter of 12 mm and a shank diameter of 40 mm make it suitable for many conventional boring bar ranges used in industry. Practical workshop benefits and compatibility notes Constructed in the E2 S configuration and drilled through where feasible, the holder supports efficient maintenance and cleaning, while the slotted section is dimensioned for standard insertion depths (e.g., up to 16 mm at 4×D, 20 and 25 mm at 3×D, from 32 mm at 2.5×D). The adherence to DIN 69880 guarantees interchangeability and reduces the risk of mismatched components on the shop floor. For operations processing medium‑run parts or requiring reliable repeatability, the design helps to lower rework rates and improve overall process stability. For procurement or detailed technical advice on the TECWERK VDI40 toolholder (SKU 2000833487NW), contact Metav Werkzeuge for expert guidance and prompt supply. Technical data Article number: 2000833487NW Product type: Toolholder for boring bars Brand: TECWERK Standard: DIN 69880 Facts Diameter D: 46 mm Overall length L: 95 mm L1: 73 mm Clamping diameter d2: 12 mm d1: 40 mm Special features Form: E2 S Through‑bored: yes Slotted clamping for vibration reduction Secured with retaining ring to prevent ejection Suitable for full‑round boring bars with V‑groove External and internal coolant compatible Length adjustment from shank side possible FAQ Is this holder suitable for internal coolant supply? Yes. The TECWERK VDI40 toolholder is through‑bored and supports internal coolant routing as well as external coolant supply. Which bar diameters and profiles are compatible? The holder is specified for a clamping diameter of 12 mm and accommodates full‑round boring bars with a V‑groove as well as slotted bars in the corresponding Ø range. Does the holder fit standard VDI turrets? Yes. The interface complies with DIN 69880 and is configured for the VDI40 turret standard. How does the slotted design affect vibration? The slotted E2 S configuration wraps the bar and reduces free span movement, which lowers vibration and improves surface finish and tool life. What prevents the boring bar from falling out during turret indexing? A retaining ring secures the bar in the holder, preventing ejection into the turret during indexing or tool changes. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
46mm Tool Holder For Boring Bars E2 S Reduced Vibration, Through‑Bore DIN 69880 - TECWERK
Take advantage of a robust combination of vibration reduction and adaptable cooling to keep boring operations precise and productive; the slotted E2 S design and through‑bored Type A shank ensure reliable tool support and simple length adjustment. Order the TECWERK toolholder directly via Metav Werkzeuge or consult our specialists for fitment advice. TECWERK toolholder for boring bars, Type A, slotted E2 S — VDI40, 10 mm clamping The TECWERK toolholder for boring bars provides a slotted, through‑bored solution for vibration‑sensitive internal and external boring applications in turret lathes and turning centres. Slotted design reduces vibration during boring Through‑bored shank, Type A, for cooling and adjustment Compatible with VDI40 taper and DIN 69880 Secured by retention ring, prevents turret fall‑out Precise boring through controlled vibration damping The slotted E2 S construction wraps the boring bar to reduce resonant movement, delivering consistent bore quality and prolonging cutting‑edge life. The design achieves vibration reduction by allowing the holder to deform slightly around the bar, damping chatter without complex dampers. For production environments where runout and surface finish matter, this holder stabilises the boring bar and supports repeatable results across batches, supporting tighter tolerances and fewer reworks. Cooling and length adjustment for uninterrupted machining A through‑bored shank enables both internal and external cooling, improving chip evacuation and coolant delivery to the cutting edge. This capability helps maintain cutting temperatures and extends insert life, particularly on long‑reach borings. The holder also allows length adjustment from the shank side when the bar is through‑bored, making setup changes straightforward and reducing spindle downtime. These features combine to increase effective tool life and operational uptime. Broad compatibility with machine standards and bar formats Built to DIN 69880 and fitting a VDI40 taper, the holder integrates into standard turret systems without adapter work. The internal clamping bore of 10 mm suits common small‑diameter boring bars and, due to the slotted geometry, accepts full‑round bars with a V‑groove. This compatibility minimises inventory complexity and accelerates changeovers across different machines and applications, making the holder a pragmatic choice for mixed‑shop production. Safe mounting and adaptable slotted reach for different diameters A safety securing ring prevents the holder from dropping into the turret, a practical safeguard during indexed tool changes. The slotted area is dimensioned for effective clamping across a range of depths (e.g. up to 16 mm at 4×D, 20 and 25 mm at 3×D, and from 32 mm at 2.5×D), allowing the holder to be matched to the required overhang and stiffness. These measures reduce the risk of tool loss and unscheduled stops, helping to maintain a steady production flow. Contact Metav Werkzeuge today to confirm suitability for specific machines and to arrange supply of the TECWERK Type A slotted toolholder; Metav’s team in Emmerich can advise on delivery times and compatibility Technical data Article number: 2000833486NW Manufacturer: TECWERK Product type: Toolholder for boring bars Dimensions and core data Diameter (D): 46 mm Overall length (L): 95 mm Length L1: 73 mm d1: 40 mm d2 (clamping bore): 10 mm Form: E2 S Features and applications DIN 69880 compliant Type A = through‑bored shank Slotted execution reduces vibration by wrapping the bar Suitable for full‑round boring bars with V‑groove Slotted reach: up to 16 mm at 4×D; 20 and 25 mm at 3×D; from 32 mm at 2.5×D External and internal cooling possible Secured against falling into turret by retention ring Length adjustment possible from the shank side when through‑bored FAQ What taper does the holder fit? The holder is designed for a VDI40 taper and complies with DIN 69880, making the TECWERK toolholder (SKU 2000833486NW) compatible with standard VDI40 tool posts. Can this holder supply coolant to the cutting edge? Yes, the Type A through‑bored shank allows both internal and external coolant, so coolant can reach the cutting area when using internal coolant lines or external nozzles. Which clamping diameter is supported? The clamping bore for the holder is 10 mm, intended for 10 mm boring bars; the slotted design also accepts full‑round bars that include a V‑groove. How does the design reduce vibration? The slotted E2 S construction wraps and compresses the bar slightly to damp chatter; this passive vibration control improves surface finish and reduces rework compared with rigid, unslotted holders. Is the holder secure in the turret during indexing? Yes, the holder features a retention ring to prevent it from falling into the turret, reducing the risk of tool loss during rapid tool changes. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
47mm LED Worklight Multi Battery Hybrid 47W 5500lm Dimmable IP54 - TECWERK
Reliable hybrid LED lighting that combines high luminous output, flexible power sources and robust protection for the workshop and site. Benefit from the 47 W / 5,500 lm performance and mains‑to‑battery automatic switchover — order via Metav Werkzeuge or contact our consultants for application advice. TECWERK Multi Battery Hybrid LED Floodlight — 47 W, 5,500 lm, IP54 The TECWERK Multi Battery Hybrid LED Floodlight is a versatile site and workshop light for mains or 18 V battery use, offering reduced glare and integrated powerbank functionality. Compatible with 18 V batteries from major brands Switches automatically between mains and battery Integrated USB output for powerbank use Dimmable: 100% / 50% / 25% settings IP54 splash‑proof, shock‑ and dust‑resistant Continuous illumination for uninterrupted workflows The hybrid worklight delivers a 47 W rating and 5,500 lm luminous flux for reliable, bright illumination in demanding environments. Designed for compatibility with common 18 V tool batteries (Bosch, Makita, Milwaukee, DeWalt, CAS/Metabo), the unit switches automatically from mains to battery operation to maintain light during power interruptions. The integrated USB output serves as a powerbank, enabling device charging on site, while the reported run time of 1.5–6.5 h (depending on battery capacity and dim setting) supports extended tasks without frequent battery changes. Clear, daylight‑balanced light that reduces fatigue The fixture produces a neutral 5,000 K light colour and a wide 120° beam angle to cover work areas evenly. An opal diffuser reduces glare and softens the beam for more comfortable visual conditions, which helps to minimise eye strain during precision tasks. With an expected service life of 50,000 h, the lamp maintains consistent colour and output over prolonged use, reducing maintenance cycles and ensuring steady illumination for inspection, assembly or general workshop activities. Robust design with safety and handling in mind Built to withstand jobsite conditions, the unit is rated IP54 for splash and dust protection and is described as shockproof. Practical features include a removable H07RN‑F cable (5 m, 3G1.5 mm²), a rear protective‑earth plug and a clear charge indicator for immediate status checks. The three‑step dimmable control (100% / 50% / 25%) extends runtime when required, and automatic mains/battery switchover functions as an emergency lighting safeguard. Compliance with BGI 608 K2 underlines its suitability for professional applications that demand documented safety standards. Choose the TECWERK hybrid floodlight for dependable, flexible site lighting and contact Metav Werkzeuge for tailored application advice or ordering — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: 2000873433NW Product: TECWERK Multi Battery Hybrid LED Floodlight (translated) Packaging unit: 1 Brand: TECWERK Numbers / Core technical data Power: 47 W Light output: 5,500 lm Colour temperature: 5,000 K Beam angle: 120° Service life: 50,000 h Run time: 1.5–6.5 h Special features / Versions Compatibility: 18 V batteries (Bosch, Makita, Milwaukee, DeWalt, CAS/Metabo) Protection class: IP54 Cable: H07RN‑F 5 m 3G1.5 mm² (removable) Lighting control: Dimmable 100% / 50% / 25% Diffuser: Opal, glare‑reduced USB output: Integrated powerbank function Safety: Automatic mains/battery switchover Certification/standard: BGI 608 K2 Tested: Yes (prüfpflichtig) FAQ What power sources can be used with this floodlight? The floodlight accepts mains power or 18 V tool batteries; it is compatible with Bosch, Makita, Milwaukee, DeWalt and CAS (Metabo) battery systems and switches automatically between mains and battery operation. How long will the light run on battery? Run time ranges from 1.5–6.5 h, depending on the battery capacity used and the selected dimming setting on the TECWERK hybrid floodlight. Is the light suitable for outdoor worksites? Yes. The unit is rated IP54 for protection against dust and splashing water and is described as shock‑resistant, making it suitable for many outdoor and site applications. Can the lamp charge mobile devices? An integrated USB output provides a powerbank function so small devices can be charged directly from the floodlight while on site. Does the light reduce glare for close‑up tasks? The opal diffuser softens the beam and reduces direct glare, delivering a more even, comfortable light that supports precision work and visual inspection. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
48mm Combination Milling Arbor With 27mm Clamping Shank, Hardened And Ground DIN 69871 AD/B - TECWERK
Take advantage of a steep taper DIN 69871 Form AD/B, secure clamping Ø 27 mm and an SK40 shank for consistent concentricity and tool retention; order the combination milling arbor directly via Metav Werkzeuge or ask our consultants for application advice. Combination milling arbor DIN 69871 AD/B, SK40, clamping Ø 27 mm — TECWERK A combination milling arbor designed for secure mounting of milling cutters with longitudinal or transverse key in SK40 spindles, optimised for precise, repeatable machining. Steep taper DIN 69871 AD/B for secure seating Clamping Ø 27 mm for standard cutter shanks Suitable for longitudinal and transverse key cutters Induction‑hardened and precision ground for wear resistance Consistent accuracy through standardised taper and hardened finish The arbor uses the DIN 69871 Form AD/B interface, providing a steep taper that ensures a positive, repeatable seating in compatible spindles. This standardised connection reduces micro‑movement under load and supports repeatable radial and axial positioning, which is vital for maintaining concentricity during milling cycles. The shaft is induction‑hardened and ground, improving wear resistance and preserving the torque‑transmission fit over extended production runs. Versatile mounting for keyed milling cutters and robust clamping Engineered to receive cutters with either a longitudinal key or a transverse key, the arbor enables flexible tooling choices without compromising retention. The clamping Ø 27 mm specification matches common shank dimensions for a wide range of milling tools, and the SK40 interface offers compatibility with many machining centres. By combining these features, the arbor simplifies tool changeovers and reduces setup time, supporting higher machine utilisation and operational efficiency. Built for workshop reliability and straightforward integration Manufactured to precise tolerances and finished by grinding, the arbor supports reliable torque transfer and long service intervals, making it suitable for both jobbing shops and production environments. The SK40 shank and adherence to the DIN standard facilitate straightforward integration into existing toolholding systems, while the hardened surface treatment lowers the rate of wear in contact zones. The result is a durable solution that sustains machining accuracy and reduces unplanned downtime. For tailored technical advice or to secure this TECWERK combination milling arbor through Metav Werkzeuge — with reliable supply from Emmerich and expert consultation available by phone or email — contact our team today. Technical data Article number: 2000833800NW Designation: Combination milling arbor DIN 69871 AD/B SK40 Brand: TECWERK Product type: Combination milling arbor Core dimensions Diameter D: 48 mm Clamping Ø d: 27 mm A: 100 mm L: 21 mm Norm: DIN 69871 Form AD/B Shank: SK40 Packaging unit: 1 Special features Steep taper DIN 69871 Form AD/B For milling cutters with longitudinal or transverse key Induction‑hardened and precision ground Designed for SK40 spindles FAQ What spindle interface does this arbor use? The arbor uses the DIN 69871 Form AD/B interface with an SK40 shank, ensuring compatibility with machines that accept this standard. Which cutter shank sizes can be clamped with this arbor? Clamping is specified for a 27 mm shank diameter, allowing secure mounting of cutters designed for that clamping dimension. Is the tool hardened for extended service life? Yes, the arbor is induction‑hardened and ground, which increases surface wear resistance and helps maintain accuracy over time. Can this arbor accept cutters with different key orientations? The design accommodates milling cutters with both longitudinal and transverse keyways, offering mounting flexibility in production setups. Which brand and article number identify this product? This is a TECWERK combination milling arbor, identified as SKU 2000833800NW, suitable for DIN 69871 AD/B toolholding interfaces. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
48mm Combination Mount Milling Arbor With 27mm Clamping Diameter, Hardened And Ground, DIN 69871 AD/B - TECWERK
Take advantage of a secure, standardised mounting solution with proven DIN 69871 compatibility and a clamping diameter of 27 mm, combined with a SK40 shank and a case-hardened, ground finish for long service life — order directly via Metav Werkzeuge or consult our specialists for application advice. TECWERK Combination mounting arbor DIN 69871 AD/B – SK40, clamping Ø 27 mm The combination mounting arbor is a compact mounting adapter for milling cutters with longitudinal or transverse key, designed for robust clamping in SK40 spindles and versatile machining tasks in production and workshop environments DIN 69871 Form AD/B compatibility SK40 taper shank for standard spindles Clamping diameter 27 mm for small cutters Case-hardened and ground for durability High rigidity and dependable tool holding for consistent production The steep taper specified in DIN 69871 and the SK40 shank give the arbor high axial and radial rigidity, which reduces runout and secures repeatable positioning of mounted cutters. This mechanical stability translates directly into more consistent surface finish and fewer rejects in batch production, as the solid interface between spindle and arbor dampens vibration and maintains concentricity under load. The design therefore supports productivity gains through reduced rework and stable machining results. Surface hardening and precision grinding extend service life Thanks to the case-hardened and ground treatment, the contact surfaces are wear-resistant while the core retains toughness, so the arbor withstands repeated mounting cycles and moderate shocks without premature fatigue. Precision grinding of the seating faces ensures low tolerance deviation and reliable centring of the toolholder, which helps to prolong cutter life and reduce maintenance intervals. The combination mounting arbor thus offers a balance of durability and precision that is advantageous for continuous workshop use. Flexible compatibility for straightforward integration into machining cells With a clamping diameter of 27 mm and an overall diameter of 48 mm, the adapter accepts milling cutters featuring longitudinal or transverse keyways, enabling quick adaptation to commonly used cutter designs. The projection dimension (A: 55 mm, L: 21 mm) provides sufficient clearance for a variety of setups while keeping overhang minimal to preserve stiffness. Compatibility with standardised interfaces makes this arbor a practical choice when integrating into existing SK40 tool chains or when standardisation across a fleet of machines is required. For delivery, technical compatibility checks or detailed product advice on the TECWERK combination mounting arbor, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 to arrange swift supply or expert consultation Technical Data Article number: 2000833799NW Manufacturer: TECWERK Product type: Combination mounting arbor (Kombiaufsteckfräsdorn) Standard: DIN 69871 Form AD/B Facts Diameter D: 48 mm Clamping Ø d: 27 mm A (projection): 55 mm L: 21 mm Shank: SK40 Special features Steep taper per DIN 69871 Form AD/B For milling cutters with longitudinal or transverse key Case-hardened and ground surfaces Designed for reliable, repeatable clamping FAQ What spindle standard does this arbor follow? The TECWERK combination mounting arbor is specified to DIN 69871 Form AD/B, making it compatible with spindles and interfaces designed to that standard. Which cutters can be mounted on this arbor? Milling cutters with either a longitudinal or transverse key can be mounted on the arbor thanks to the clamping diameter of 27 mm and the keyway-compatible design. Is the arbor suitable for heavy-duty production use? The case-hardened and ground finish plus the SK40 shank deliver the rigidity and wear resistance expected for regular workshop and light industrial production environments. How does the arbor help with tool repeatability? The steep taper and precision grinding of seating surfaces ensure low runout and consistent centring, so the TECWERK arbor maintains repeatable positioning across multiple tool changes. What is the article number for ordering and reference? Order or request details referencing article number 2000833799NW, the TECWERK combination mounting arbor Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
48mm Cross Slot Adapter Arbor With Enlarged Collar, Hollow Shank A According To DIN 69893 Form A, Tool Holder For 22mm Clamping Diameter - TECWERK
Take advantage of the secure HSK‑A63 interface, enlarged flange diameter and face coolant channels for stable cutter mounting and consistent surface quality; order or request advice via Metav Werkzeuge for tailored guidance. Transverse‑slot mounting arbor DIN 69893A, HSK‑A63, Clamping Ø 22 mm — TECWERK The Transverse‑slot mounting arbor DIN 69893A by TECWERK is a precision toolholder designed for the secure reception of cutter heads and milling cutters with a transverse slot according to DIN 1880, ideal for milling applications requiring repeatable concentricity HSK‑A63 hollow shank taper for rigid coupling Clamping Ø 22 mm for standard cutter shanks Face coolant channels for improved cooling Enlarged flange diameter for higher stability Secure, standardised interface that reduces runout and set‑up time The HSK‑A63 hollow shank taper specified to DIN 69893 ensures a form‑fit connection that minimises micro‑movement during machining. With a clamping Ø 22 mm and an enlarged flange diameter, the arbor offers a stiffer mounting than conventional adapters, which translates into reduced runout and fewer secondary operations. For production environments this means greater process reliability and measurable reductions in scrap and rework. Technical terms such as hollow shank taper and flange diameter refer to the contact geometry that transfers torque and radial loads; better contact equals better repeatability. Improved coolant delivery for longer tool life and consistent finishes Built‑in additional coolant channels at the face direct cutting fluid close to the cutting zone, promoting temperature control and more effective chip evacuation. The resulting reduction in thermal stress helps preserve cutting edge geometry, extending tool life and maintaining surface quality over longer runs. In practice, consistent cooling reduces the frequency of tool changes and stabilises cycle times, supporting efficient throughput in both jobbing and serial milling operations. Broad compatibility and robust mounting for versatile workshop use Designed to accept cutter heads and milling cutters with a transverse slot to DIN 1880, the arbor provides compatibility across a wide range of tooling systems. The hollow shank taper and the larger flange diameter combine to provide secure axial and radial location, facilitating repeatable tool changes and straightforward Cartesian set‑up. The result is a compact, robust toolholding solution that integrates into standard HSK‑A spindles and supports stable milling performance across diverse applications. Choose TECWERK HSK‑A63 toolholding for precise, stable cutter mounting—contact Metav Werkzeuge in Emmerich for technical advice and rapid supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 2000833877NW Product type: Transverse‑slot mounting arbor Brand: TECWERK Standard: DIN 69893 Mounting: HSK‑A Facts Diameter D: 48 mm A: 50 mm Clamping Ø d: 22 mm L1: 19 mm Special features Enlarged flange diameter for improved stability Hollow shank taper according to DIN 69893 Form A Additional coolant channel drillings at the face For cutter heads and milling cutters with transverse slot to DIN 1880 FAQ What spindle interface does this arbor use? The Transverse‑slot mounting arbor uses an HSK‑A63 hollow shank taper in accordance with DIN 69893, providing a rigid form‑fit coupling. Are there integrated coolant provisions? Yes, the arbor includes additional coolant channels at the face to direct fluid toward the cutting zone and assist chip evacuation. Which cutter types fit this arbor? The arbor is made for cutter heads and milling cutters with a transverse slot per DIN 1880; compatibility depends on the cutter's slot geometry and the clamping Ø 22 mm. What are the key dimensions to check for machine compatibility? Refer to article number 2000833877NW: main dimensions include D 48 mm, A 50 mm, clamping Ø 22 mm and L1 19 mm to confirm fitment with the intended spindle and tooling. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
48mm Cross Slot Arbor With 22mm Collet For Cutter Heads, DIN 69871 AD/B - TECWERK
Take advantage of the combination of an enlarged flange diameter, central coolant supply and a steep DIN taper for consistent clamping and efficient cooling during heavy milling. Order this specialised arbor through Metav Werkzeuge or request technical advice from our consultants for an optimal integration into production. Side-groove mounting arbor DIN 69871 Form AD/B – SK40, 22 mm clamping diameter (TECWERK) The Side-groove mounting arbor DIN 69871 AD/B is a CNC tool-holder designed for secure reception of cutter heads and milling cutters with side grooves, delivering controlled coolant flow and robust clamping for industrial machining Central coolant supply for optimal cooling Resealable coolant channels at the flange DIN 69871 Form AD/B steep taper SK40 shank, 22 mm clamping diameter Improved tool life through controlled coolant delivery The arbor places coolant exactly where it matters: a central coolant supply combined with resealable coolant channels at the flange and additional coolant holes at the face directs lubricant and coolant into the cutting zone. This targeted supply reduces thermal load and chip welding, which in turn lowers wear on inserts and cutter bodies. For production settings where cycle-time consistency and insert life have direct cost implications, the improved cooling capability translates into fewer tool changes and steadier process results. The component’s fluid-routing is designed to be simple to refill and maintain without compromising the sealing at the flange. Stable clamping and repeatable concentricity for precise milling The steep taper according to DIN 69871 Form AD/B and the enlarged flange diameter provide a robust interface between spindle and tooling, improving axial and radial rigidity during side-groove milling. The SK40 shank with a 22 mm clamping diameter offers a widely adopted interface for medium to heavy-duty milling spindles, making the arbor suitable for toolrooms and industrial workshops. Enhanced flange geometry reduces runout and vibration, which supports consistent surface finish and tighter dimensional tolerances when paired with cutter heads conforming to DIN 1880. Workshop-ready dimensions and compatibility for easy integration Designed for practical integration, the arbor’s key dimensions are supplied to align with standard tooling inventories: A = 100 mm, D = 48 mm, Clamping Ø = 22 mm, L1 = 19 mm. These dimensions permit quick selection against existing cutter heads and enable predictable tool offsets in CAM settings. The unit is intended for capturing cutter heads and milling cutters with side grooves per DIN 1880, so compatibility checks are straightforward. For complex setups or verification of suitability for a specific machine spindle, Metav’s technical team is available to provide clarification and measurement support. Contact Metav Werkzeuge for tailored tooling advice and to secure the TECWERK side-groove mounting arbor with central coolant for reliable, high-performance milling operations. Technical Data Article number: 2000833817NW Manufacturer: TECWERK Product type: Side-groove mounting arbor Standard: DIN 69871 Form AD/B Core specifications Diameter D: 48 mm Clamping diameter d: 22 mm A (length): 100 mm L1: 19 mm Packaging unit: 1 Features Enlarged flange diameter Steep taper according to DIN 69871 Form AD/B Central coolant supply Resealable coolant channels at flange Additional coolant holes at face For cutter heads and milling cutters with side groove DIN 1880 SK40 shank interface FAQ What taper standard does the arbor use? The arbor uses the steep taper specified by DIN 69871 Form AD/B, ensuring compatibility with spindles and holders designed to that standard. Which clamping diameter and shank does it have? The tool-holder features a 22 mm clamping diameter and an SK40 shank, making it suitable for many medium-duty milling spindles. How does the coolant routing work on this arbor? Coolant is supplied centrally and distributed via resealable channels at the flange plus additional coolant holes at the face, directing fluid to the cutting zone for improved cooling and chip evacuation. Which cutter heads are compatible with this arbor? The arbor is designed for reception of cutter heads and milling cutters with side grooves according to DIN 1880; compatibility should be checked against the cutter head’s nominal groove specification. What is the article number for ordering or referencing? Refer to article number 2000833817NW when ordering the TECWERK side-groove mounting arbor or when requesting technical information. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
48mm Cross-Slot Arbor With 22mm Clamping Diameter, DIN 69871 AD/B With Central Coolant - TECWERK
Benefit from the combination of an enlarged collar diameter, a steep DIN 69871 AD/B taper and a central coolant supply with resealable channels for stable, coolant‑optimised cross‑slot milling. Order the arbor directly via Metav Werkzeuge or request advice from our consultants. Cross‑slot milling arbor — DIN 69871 Form AD/B, SK40, Ø48 mm, clamping Ø22 mm (TECWERK) Cross‑slot milling arbor (Quernutaufsteckfräsdorn) delivers rigid holding for cutter heads and milling cutters with DIN 1880 cross‑slots, suited to productive metalworking environments Steep taper DIN 69871 AD/B for secure seating Central coolant supply with resealable channels Enlarged collar for improved rigidity and stability Compatible with SK40 holders, clamping Ø 22 mm Increased rigidity for precise machining outcomes The arbor is engineered to improve the stability of mounted cutter heads: the enlarged collar diameter raises the contact area and reduces vibration during heavy cuts, which directly supports more consistent surface finishes and predictable tool life. By combining a robust external geometry with the standardised DIN 69871 Form AD/B taper, the holder ensures repeatable axial seating in SK40 spindles and minimises runout-related rejects. This stability benefits batch production and one‑off operations alike by reducing rework and downtime. Reliable coolant delivery for longer tool life Integrated central coolant supply and resealable coolant channels at the collar, plus additional coolant holes at the face, provide direct fluid delivery to the cutting interface. Improved coolant flow helps evacuate chips and control cutting temperatures, which extends the service life of cutters and reduces the frequency of tool changes. For users who value uptime, the optimised coolant routing offers a measurable improvement in process reliability without requiring modifications to existing coolant systems. Conforms to standards and eases tool planning Designed to the DIN 69871 AD/B standard and compatible with cutter heads to DIN 1880, this arbor simplifies procurement and tool presetting. The standard taper form makes the arbor interchangeable in conventional SK40 toolholders, so workshop planners can standardise tooling arrays and minimise inventory complexity. Clear, measurable specifications such as Ø 48 mm body diameter, clamping diameter 22 mm and A = 35 mm support accurate fixture design and NC programme validation. Practical benefits for everyday workshop use Installation and maintenance are straightforward: the arbor accepts cutter heads and milling cutters with DIN cross‑slots and the resealable channels reduce contamination risk when the tool is idle. The combination of a precise taper, enlarged collar and direct coolant feed translates into fewer stoppages for tool‑related issues and a steadier production flow. For machinists and purchasing managers seeking a durable, standards‑based solution, this toolholder provides a clear balance of performance and compatibility. Contact Metav Werkzeuge for tailored advice on integrating this TECWERK arbor into existing setups and to arrange reliable supply from Emmerich. Technical data Article number: 2000833816NW Manufacturer: TECWERK Product type: Cross‑slot milling arbor Standard: DIN 69871 Form AD/B Facts Body diameter D: 48 mm Clamping diameter d: 22 mm A: 35 mm L1: 19 mm Delivery unit: 1 Special features Steep taper to DIN 69871 Form AD/B Central coolant supply Resealable coolant channels at collar Additional coolant holes on the face Enlarged collar diameter for increased rigidity For mounting cutter heads and milling cutters with DIN 1880 cross‑slot SK40 shank compatibility FAQ What spindle taper does this arbor use? The arbor uses the DIN 69871 Form AD/B taper and is designed for SK40 spindles, ensuring secure seating and repeatable positioning. Which cutter heads can be mounted to this arbor? Cutter heads and milling cutters with a DIN 1880 cross‑slot fit the arbor; the design supports direct mounting and stable clamping for indexable and solid cutter systems. How does the coolant supply improve performance? The central coolant feed with resealable channels and additional face holes delivers coolant directly to the cutting zone, improving chip evacuation and reducing cutting temperatures for extended tool life. Is the clamping diameter specified? Yes — the arbor provides a clamping diameter of 22 mm, which is indicated for the compatible tool shanks or collets. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
48mm Cross-Slot Arbor With Enlarged Collar, Hollow Shank DIN 69893 Form A, 22mm Clamping Ø - TECWERK
Combining a secure HSK-A63 interface with an enlarged flange and face coolant channels, this arbor provides stable clamping and effective cooling for cutter heads to DIN 1880; order directly via Metav Werkzeuge or request specialist advice from our consultants for exact application matching. Quernutaufsteckfräsdorn DIN 69893A Spann-D.22mm HSK-A63 A.-L.100mm TECWERK — HSK-A63 arbor with enlarged flange and face coolant bores The Quernutaufsteckfräsdorn DIN 69893A Spann-D.22mm HSK-A63 A.-L.100mm TECWERK is a plug-in milling arbor for HSK-A63 spindles designed to accept cutter heads and cutters with a cross-slot to DIN 1880, offering an enlarged flange and additional face coolant bores for demanding milling operations. HSK-A63 connection for high-precision clamping Enlarged flange diameter for greater stability Face coolant channels for improved tool cooling Compatible with cutter heads to DIN 1880 Secure, high-precision clamping for stable milling The arbor features an HSK-A63 interface built to the DIN 69893 Form A standard, ensuring repeatable positional accuracy and low runout during heavy-duty operations. The combination of the standardised hollow shank taper and an enlarged flange increases contact area and radial support, which translates into greater stability when carrying cutter heads. This stability reduces vibration and helps maintain consistent surface finish and tool life, a clear operational advantage in production environments where repeatability matters. Integrated cooling for extended tool life and process reliability Additional coolant channels drilled to the face of the arbor supply cutting fluid directly to the tool interface and cutting zone. This targeted delivery improves heat dissipation and chip evacuation, lowering thermal stress on inserts and cutter bodies. The result is a measurable extension of tool life and fewer interruptions for tool changes, which supports higher machine uptime and a more economical machining cycle in continuous production. Straightforward compatibility with standard cutter heads Designed for the reception of cutter heads and cutters with a cross-slot to DIN 1880, the arbor provides a standardised mounting solution that simplifies tooling selection and interchange. The 22 mm clamping diameter and defined interface dimensions make integration into existing toolsets straightforward, reducing adaptation effort at the machine. The product label and standard conformity allow for easy identification within inventory and tooling lists, aiding shop-floor organisation and procurement. Robust construction tailored to workshop and industrial use A solid main body with a 48 mm body diameter and the standardised hollow shank taper to DIN 69893 Form A delivers a balance of stiffness and conformity to recognised mounting systems. This construction supports consistent concentricity under load and simplifies maintenance routines through standardised interfaces. Technical advice is available from Metav Werkzeuge for selection or compatibility checks, ensuring the arbor aligns with machine spindle and cutter head specifications in practice. Discuss application requirements with Metav Werkzeuge for delivery from Emmerich and tailored advice on selecting the correct TECWERK arbor and accessories Technical data Article number: 2000833878NW Label: Quernutaufsteckfräsdorn DIN 69893A Spann-D.22mm HSK-A63 A.-L.100mm TECWERK Manufacturer: TECWERK Core data Norm: DIN 69893 Form A Connection: HSK-A63 Body diameter: 48 mm Clamping diameter d: 22 mm Overall length A: 100 mm L1: 19 mm Special features Enlarged flange diameter Hollow shank taper according to DIN 69893 Form A Additional coolant channel bores at the face Acceptance of cutter heads and cutters with cross-slot DIN 1880 FAQ What spindle interface does this arbor use? The arbor uses an HSK-A63 interface built to DIN 69893 Form A for standardised, high-precision clamping. Can this arbor deliver coolant to the cutting edge? Yes, the arbor includes additional face coolant channels that supply fluid to the tool interface and cutting zone. Which cutter heads are compatible with this arbor? Cutter heads and cutters with a cross-slot to DIN 1880 are compatible; the arbor is specifically designed for that mounting form. What are the critical dimensions to check before ordering? Key dimensions are the 48 mm body diameter, the 22 mm clamping diameter and the overall length A of 100 mm (Article number 2000833878NW). Is technical advice available for integration with existing tooling? Technical advice and application checks are available from Metav Werkzeuge to confirm compatibility with machine spindles and cutter heads. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
48mm Extension Nut M16 SW24mm Corner Size 26.8 - AMF
Take advantage of a reliable thread extension that combines M16 compatibility with a 24 mm spanner size for straightforward assembly and maintenance. The 48 mm overall height provides increased reach where additional thread length is required; order directly via Metav Werkzeuge or consult our advisors for application-specific advice. Extension nut No. 6334 M16 (AMF) — 24 mm spanner, 48 mm height A Extension nut No. 6334 M16 engineered to extend threaded connections in mechanical assemblies and workshop fixtures for improved accessibility and secure fastening. M16 thread compatibility Spanner size 24 mm Overall height 48 mm Increase assembly flexibility with a standard M16 solution The extension component offers a simple mechanical solution when original bolt length is insufficient. By providing an additional threaded section compatible with M16 fittings, the component removes the need for bespoke fasteners or temporary workarounds. The standardised geometry and 24 mm spanner width make it compatible with common tools, reducing preparation time and streamlining assembly operations. This results in measurable efficiency gains during maintenance or retrofit tasks. Minimise downtime through straightforward handling and fit Designed for quick integration into existing assemblies, this extension nut ensures consistent clamping behaviour and predictable torque application. The 48 mm overall height supplies the extra engagement required for secure joints without compromising access for tools. Where repeatability matters, the regularised dimensions support reproducible results across multiple assemblies, helping to cut rework and keep production or workshop schedules on track. Proven practicality for workshop and industrial use Manufactured by AMF, the extension nut combines robust design with everyday usability. The precise corner measure and standard spanner width ensure reliable tightening and a reduced risk of rounding during service. For engineers and technicians seeking a pragmatic component to restore or extend thread length, this part provides a balance of precision and convenience compatible with standard clamping and fastening practices. For tailored advice on integrating this AMF extension nut into a specific assembly or to request a quotation, contact Metav Werkzeuge for expert guidance and reliable supply — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 4000833428NW Type: Nr. 6334 - M16 Name: Extension nut No. 6334 M16 SW 24mm AMF Manufacturer: AMF Product type: Extension nut Facts Overall height: 48 mm Spanner width: 24 mm Corner dimension: 26.8 mm Packing unit: 1 UID: 4000833428NW Special features Thread size: M16 Corner measurement (addition): 26.8 mm Standard spanner compatibility: SW 24 mm AMF brand component FAQ What thread size does the extension nut support? The extension nut supports an M16 thread and is supplied as extension nut No. 6334 from AMF. Which tool fits the nut for assembly? A 24 mm spanner is specified for the nut, matching the SW 24 mm designation on the product. How much additional length does the component provide? The component has an overall height of 48 mm, giving a predictable increase in usable thread length for assemblies. Is this suitable for industrial retrofit applications? Yes, the extension nut No. 6334 M16 by AMF is intended for mechanical assemblies and workshop fixtures where extra thread engagement is required. How is the part packaged? The item is supplied with a packing unit of 1. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
48mm Face Clamping Chuck Weldon 16mm Clamping Ø, HSK‑A63 DIN 69893 Form A - TECWERK
Take advantage of a compact, standard-compliant clamping solution that combines repeatable precision with straightforward tool change. The Weldon face-clamping holder delivers a 16 mm clamping diameter in a short A-length of 80 mm, guaranteeing secure holding for cylindrical-shank cutters and stable performance at the spindle nose. TECWERK Weldon face-clamping holder HSK-A63 — DIN 69893 Form A, 16 mm clamping Ø A Weldon face-clamping holder for HSK-A63 spindles, designed to hold cylindrical-shank tools with a lateral drive flat to DIN 1835-B for reliable machining tasks. HSK-A63 interface, DIN 69893 Form A Weldon flat for lateral drive to DIN 1835-B Clamping diameter 16 mm, bore tolerance H4 Compact body Ø 48 mm, A-length 80 mm Consistent clamping accuracy for repeatable machining This clamping unit focuses on repeatability and secure tool retention. The holder is built to the DIN 69893 standard and uses an HSK-A63 interface, which ensures a precise fit at the spindle taper and a predictable mechanical connection. The specified 16 mm clamping diameter with H4 bore tolerance reduces runout and vibration, translating into improved surface finish and extended tool life. For production environments where process stability is essential, the predictable behaviour of this holder supports tight tolerances and consistent part quality. Space-saving design that reduces spindle load A compact external diameter of 48 mm and an A-length of 80 mm keep overhang to a minimum, lowering bending moments on the spindle and reducing the risk of chatter. The short, rigid design benefits high-speed and precision operations by maintaining stiffness close to the cutting zone. Where machine dynamics and spindle life are priorities, the compact construction helps preserve machine performance while supporting efficient chip removal and coolant access. Fast, secure tool retention using the Weldon flat system The Weldon arrangement provides positive lateral engagement for tools with a cylindrical shank and a lateral drive flat to DIN 1835-B, eliminating rotational slip under torque. The holder features a hollow-shank taper in DIN 69893 Form A, allowing quick insertion and axial locating during tool changes. The specified bore tolerance H4 ensures a snug fit to the tool shank, helping to avoid micro-movement under cutting loads. For workshops seeking straightforward, mechanical engagement without additional anti-rotation devices, this solution balances simplicity with mechanical security. Supplier support and practical application guidance Metav Werkzeuge is presented here as a reliable distribution partner for precision workshop equipment. The holder is especially suitable for milling and finish-machining applications where tools with a Weldon flat are used. For customers preparing fixtures or planning tool-change cycles, the catalogued dimensions and standards make integration into existing tool management systems straightforward. If further clarification is required on compatibility with specific machines or tooling sets, Metav’s advisory line can assist with technical matching and ordering details. Contact Metav Werkzeuge for tailored advice on the TECWERK Weldon face-clamping holder HSK-A63 (SKU 2000832390NW) — phone +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: 2000832390NW Brand: TECWERK Product: Face clamping holder Interface: HSK-A63 Core specifications Standard: DIN 69893 Clamping diameter: 16 mm A-length: 80 mm Body diameter: 48 mm Bore tolerance: H4 Special features Weldon flat for lateral drive to DIN 1835-B Hollow-shank taper, DIN 69893 Form A Designed for tools with cylindrical shank and lateral drive flat FAQ What spindle interface does this holder use? The holder uses an HSK-A63 interface and is manufactured to DIN 69893 Form A, ensuring correct seating in compatible spindles. Which tool shanks are compatible with this clamping unit? This Weldon face-clamping holder is made for cylindrical shanks with a lateral drive flat to DIN 1835-B; the clamping bore is 16 mm with H4 tolerance for a secure fit. How does the Weldon flat improve torque transmission? The Weldon flat provides a positive lateral engagement that prevents rotational slip under cutting forces; the face-clamping holder transfers torque mechanically via the flat and the clamping interface. Is this product suitable for high-precision finishing operations? Yes. The combination of DIN 69893 standardisation, H4 bore tolerance and the HSK-A63 interface supports low runout and stable machining, making it suitable for finishing tasks. What is the SKU for ordering reference? Ordering reference: 2000832390NW for the TECWERK Weldon face-clamping holder HSK-A63. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
48mm Face Clamping Chuck Weldon 16mm Shank Bore, DIN 69871 Form AD 100mm - TECWERK
Take advantage of the combination of secure Weldon torque transfer, a precise 16 mm clamping diameter and standard SK40 taper for reliable tool holding in production environments. Order directly via Metav Werkzeuge or consult our specialists for application advice. Weldon face-clamping holder (DIN 69871 Form AD), SK40, 16 mm bore – TECWERK The Weldon face-clamping holder (DIN 69871 Form AD) is a SK40 taper tool holder designed to accept tools with a cylindrical shank and a lateral drive flat according to DIN 1835‑B, delivering secure retention for machining tasks. Weldon lateral drive for reliable torque transfer Steep taper DIN 69871 Form AD for precise seating 16 mm clamping diameter with H4 bore tolerance Reliable torque transfer for demanding machining The Weldon lateral drive ensures positive mechanical engagement with tools that have a side drive flat, eliminating slippage under high loads. With a 16 mm clamping diameter, the holder supports common solid shank tools while maintaining concentricity, which reduces vibration and improves surface finish. This combination is designed to secure torque transmission in milling and drilling operations without sacrificing repeatability. Seamless integration with SK40 spindle systems Featuring a steep taper compliant with DIN 69871 Form AD, the holder seats precisely in any standard SK40 spindle. The standardised taper geometry reduces runout at the tool interface and simplifies tool changes, enabling consistent alignment every time the taper is engaged. For shops using conventional spindle tooling, this results in measurable process stability and reduced setup time. Engineered tolerances for consistent accuracy A tight bore tolerance of H4 minimises radial play between tool shank and holder, which supports reproducible concentricity and tool life. The controlled fit prevents micro-movements under cutting forces and contributes directly to dimensional stability of finished parts. Explaining the tolerance, H4 indicates a small positive allowance that is suitable for precision tooling applications requiring repeatable performance. Balanced reach and rigidity for workshop versatility With a projection length of 100 mm and an outer diameter of 48 mm, the design balances reach with stiffness to suit a variety of machining setups. The holder is intended for tools with cylindrical shanks and lateral drive flats per DIN 1835‑B, providing a compact mounting solution that maintains rigidity where it matters. The compact body and standard interface help keep clamping forces effectively transferred to the tool shank for robust performance. For tailored SK40 tooling support and prompt supply from Metav Werkzeuge, contact our consultants at info@metav-werkzeuge.com or call +49 2822 7131930 for application-specific advice and ordering. Technical Data Article number: 2000833734NW Label: Flächenspannfutter DIN 69871AD Weldon Spann-D.16mm SK40 A.-L.100mm TECWERK Norm: DIN 69871 Product type: Face-clamping holder Manufacturer: TECWERK Facts A: 100 mm D: 48 mm Clamping Ø d: 16 mm Bore tolerance: H4 Packaging unit: 1 Special features Weldon lateral drive Steep taper per DIN 69871 Form AD Accepts cylindrical shanks with lateral drive flat (DIN 1835‑B) Designation: SK40 Bore tolerance H4 FAQ What tool shank types are compatible with this holder? The holder accepts tools with a cylindrical shank and a lateral drive flat in accordance with DIN 1835‑B; the lateral flat engages the Weldon drive for secure torque transfer. Can this holder be used with any SK40 spindle? Yes, the steep taper conforms to DIN 69871 Form AD, ensuring compatibility and precise seating in standard SK40 spindles. How does the H4 bore tolerance affect performance? The H4 bore tolerance reduces radial play between tool and holder, improving concentricity and repeatability under cutting loads for better surface finish and tool life. What are the main dimensional limits to consider for fixture design? Key dimensions are a projection (A) of 100 mm, outer diameter (D) of 48 mm, and a clamping diameter of 16 mm, which should be accommodated in fixture and toolpath planning. Is the holder suitable for high-torque milling operations? The combination of a Weldon lateral drive and a secure 16 mm clamping interface provides robust torque transfer suitable for demanding milling tasks when used within the holder’s specified limits. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
48mm Face Clamping Chuck Weldon Shank 16mm Clamping Ø, HSK-A63 DIN 69893 Form A - TECWERK
Benefit from precise clamping, active coolant delivery and secure drive: the combination of an HSK‑A63 interface, internal cooling and a Weldon clamping flat keeps tools cool, centred and stable for consistent results. Order the face clamping chuck directly via Metav Werkzeuge or request application advice from our consultants. TECWERK face clamping chuck HSK‑A63 with internal cooling, Weldon clamping Ø16 mm The TECWERK face clamping chuck is a high‑precision toolholder designed for CNC machining and milling, offering an HSK‑A63 interface and integrated coolant delivery for reliable clamping and enhanced tool life. HSK‑A63 interface DIN 69893 Form A Internal cooling with side coolant channels Weldon flat to DIN 1835 B for secure drive Clamping Ø 16 mm, outer Ø 48 mm, length 80 mm High precision and system compatibility for CNC machining The holder combines an HSK‑A63 connection compliant with DIN 69893 Form A and a compact body for predictable spindle engagement. This design ensures excellent repeatability and radial stability at high spindle speeds, which is essential in production environments where tolerance adherence is non‑negotiable. The toolholder supports consistent chip‑to‑chip accuracy and simplified setup when integrated into standard HSK tool‑change systems on modern machining centres. With this mechanical basis, process planners gain measurable improvements in part quality and reduced scrap rates. Active coolant routing that extends tool life Built‑in internal cooling and side coolant channels provide directed coolant to the cutting zone for tools with cylindrical shanks. By delivering coolant close to the cutting edge, the holder reduces thermal load and improves chip evacuation, which in turn increases tool life and surface finish quality. For operations that demand longer uninterrupted cycles, the improved cooling performance translates into fewer tool changes and lower overall machining costs, while maintaining tight dimensional results even in demanding materials. Secure torque transmission and quick, repeatable clamping The lateral drive surface conforms to DIN 1835 B (Weldon flat), providing a positive drive for cylindrical shank tools and preventing slippage under high axial or torque loads. This mechanical interface combines with the clamping mechanism to deliver fast, reliable tool changes and consistent axial run‑out values. The combination of the Weldon flat and the compact shank geometry is particularly suitable for heavy milling and finish passes where tool retention and concentricity are critical. Practical workshop benefits and procurement advantages With an outer diameter of 48 mm and a projection/length of 80 mm, the holder fits common tool configurations without adding excessive overhang, supporting rigid setups and easier tool access. The compact form factor, standardised interface and coolant capability simplify tool inventory and reduce the variety of specialised holders required. For purchasing teams and workshop managers, this means fewer suppliers, quicker selection decisions and dependable repeatability from a single, robust toolholder family. Discuss the HSK‑A63 face clamping chuck with Metav Werkzeuge for tailored machining recommendations and to check compatibility with existing tool sets — contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 2000833840NW Manufacturer: TECWERK Product type: Face clamping chuck Norm: DIN 69893 Form A Interface: HSK‑A63 Facts Clamping diameter: 16 mm Outer diameter: 48 mm Projection/length A: 80 mm Packaging unit: 1 Special features Internal cooling for directed coolant delivery Side coolant channels for cylindrical shank tools Lateral drive surface to DIN 1835 B (Weldon flat) Suitable for standard HSK tool‑change systems FAQ What spindle interface does this chuck use? The TECWERK face clamping chuck uses an HSK‑A63 spindle interface in accordance with DIN 69893 Form A (SKU 2000833840NW), ensuring compatibility with HSK‑A63 toolholders and spindles. How is cooling supplied to the cutting edge? Cooling is provided via internal cooling plus side coolant channels, which deliver coolant close to the tool tip for improved tool life and chip control when using cylindrical shank tools. What clamping diameter is available with this holder? The holder provides a clamping Ø of 16 mm, suitable for cutters and arbors that require a secure Weldon‑style drive and positive torque transmission. Is the drive interface a standard Weldon flat? Yes — the product features a lateral drive surface manufactured to DIN 1835 B, commonly referred to as a Weldon flat, for reliable axial and torsional transmission. What are the main dimensional references for workshop planning? Key dimensions are outer Ø 48 mm and a projection/length A = 80 mm, which support rigid setups with limited overhang. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
48mm Face Clamping Chuck with 16mm Weldon Shank, DIN 69871 AD/B, Coolant Channels - TECWERK
Take advantage of the combination of a SK40 taper, Weldon 16 mm clamping and integrated coolant channels for reliable tool retention and extended tool life; order directly via Metav Werkzeuge or consult our specialists for application matching and availability. Face clamping chuck DIN 69871 AD/B, Weldon 16 mm, SK40 – TECWERK A face clamping chuck that secures cylindrical-shank tools with a Weldon flat, designed for SK40 toolholders and equipped with central coolant and resealable channels for industrial milling and machining applications. SK40 taper for standard milling spindles Weldon 16 mm clamping for secure retention Central coolant supply with resealable channels Bore tolerance H4 for consistent concentricity Precision clamping for reproducible machining results The holder delivers consistent concentricity through a bore manufactured to H4 tolerance, reducing run-out and improving surface finish. Designed to the DIN 69871 toolholder standard, the unit ensures repeatable alignment in machining spindles with SK40 taper, which supports stable cutting conditions and predictable cycle times. The Weldon clamping interface secures tools with a lateral drive flat, preventing axial slip under heavy cutting loads and contributing to process reliability in batch production. Integrated coolant system to extend tool life A central feature is the central coolant supply combined with resealable coolant channels at the flange and lateral coolant passages. This arrangement provides direct coolant delivery to the cutting zone for tools with cylindrical shanks and a lateral drive flat as specified by DIN 1835-B, improving chip evacuation and reducing thermal load. The targeted coolant flow lowers wear rates, which translates into longer tool life and fewer interruptions for tool changes — a tangible efficiency gain for production environments. Dimensional compatibility and robust design for workshop use Key dimensions such as the clamping Ø 16 mm, projection A 63 mm and outer D 48 mm are matched to common tooling requirements, ensuring compatibility with standard shank diameters and fixture geometries. The construction supports industrial use, providing a compact footprint and predictable mechanical behaviour under cyclic loading. The holder’s design balances stiffness and accessibility, so set-up and replacement are straightforward while maintaining the mechanical integrity required for repeated spindle insertions. Why this holder benefits industrial workflows By combining a standardised SK40 taper, secure Weldon clamping, and an industry-oriented coolant concept, the chuck reduces process variability and supports higher machine uptime. For procurement and shop-floor planning, the solution reduces the need for multiple ad hoc holder types and simplifies inventory control. Its specification-driven design makes it suitable for a broad range of milling operations where concentricity, coolant management and secure tool retention are decisive for quality and productivity. For advice on integrating this SK40 face clamping chuck into existing toolholders or for purchasing information, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 for personalised guidance and stock confirmation. Technical Data Article number: 2000833774NW Standard: DIN 69871 Form AD/B Type: Face clamping chuck (Weldon) Shank taper: SK40 Clamping diameter: 16 mm Core dimensions Projection A: 63 mm Outer diameter D: 48 mm Bore tolerance: H4 Special features Central coolant supply Resealable coolant channels at flange Lateral coolant channels for cylindrical shanks Lateral drive flat compatible with DIN 1835-B FAQ What diameter of tool shank does the holder accept? The clamping diameter is 16 mm; the chuck secures cylindrical shanks with a Weldon flat for positive drive. Is the holder compatible with SK40 spindles? Yes, the face clamping chuck is designed for SK40 taper toolholders in accordance with DIN 69871 AD/B. How does the coolant system work on this chuck? Central coolant is supplied through the shank with resealable channels at the flange and lateral channels for tools with a cylindrical shank and lateral drive flat, improving coolant delivery to the cutting zone. What tolerance should be expected for the bore? The bore is manufactured to H4 tolerance, ensuring consistent concentricity and minimising run-out. Which standard defines the lateral drive flat compatibility? Lateral drive flat compatibility follows DIN 1835-B, enabling secure torque transmission for tools with a Weldon-style flat. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com