XCGT 050204 Indexable Insert for Stainless Steel - MetavCUT

Take advantage of a compact, indexable solution for precise steel machining: the combination of a Ø10.5 mm cutting diameter, a 31 mm cutting length and a rigid 16 mm shank ensures stable performance and reduced tool-change time; order this tool directly via Metav Werkzeuge or request advice from the Metav consultants. Indexable-insert drill body U32TM (Ø10.5 mm, compatible with Taegutec inserts) by Teknik Makina A Indexable-insert drill body designed for reliable removal of material in steel applications, offering a compact overall length of 90 mm and straightforward integration into standard toolholders. Compatible with Taegutec XCGT 050204 Ø10.5 mm cutting diameter 31 mm cutting length for deep holes 16 mm shank with 45 mm clamping length Consistent hole quality for production environments The drill body delivers consistent hole quality by combining a defined cutting zone with a stable shank geometry. The specified Ø10.5 mm diameter and 31 mm cutting length are selected to give predictable chip evacuation and reduced run-out in high-volume operations. As an indexable-insert system, the cutting edges are replaced rather than the entire tool, which keeps downtime low and maintains repeatability across batches. Overall rigidity and a compact footprint reduce vibration, so that tolerance retention is supported across repetitive cycles. Simple integration and cost-effective wear management Compatibility with Taegutec XCGT 050204 inserts means the tool is supplied to fit an established insert family, simplifying procurement and stocking. The use of replaceable inserts turns cutting-edge wear into a short service step rather than a full tool change, delivering measurable cost-efficiency over the life of the tool. For workshops evaluating tooling strategies, this indexable approach reduces total tooling spend while preserving cutting performance and surface finish standards expected in industrial steelwork. Secure clamping and practical handling on the shop floor A 16 mm shank diameter with 45 mm clamping length provides secure fixation in standard toolholders, improving concentricity and enabling safer spindle speeds within the machine’s recommended limits. The assembly weight of 0.114 kg contributes to easy handling during set-up and minimises added spindle load. Designed with robust construction for steel machining, the tool body supports stable chip formation and consistent cutting conditions, which in turn aids downstream processes by reducing rework needs and supporting production throughput. For ordering or technical clarification, contact Metav Werkzeuge GmbH: info@metav-werkzeuge.com or +49 2822 7131930 and request the Teknik Makina indexable-insert drill body (U32TM) for efficient steel machining. Technical data Article number: U32TM Manufacturer: Teknik Makina Product: Indexable-insert drill body Data Diameter: 10.5 mm Overall length: 90 mm Cutting length: 31 mm Shank diameter: 16 mm Clamping length: 45 mm Weight: 0.114 kg Special features Compatible with Taegutec XCGT 050204 inserts Suitable for steel machining (shop description) Indexable-insert design for reduced tool replacement FAQ Which inserts fit this drill body? The drill body accepts Taegutec XCGT 050204 inserts; this compatibility is specified to ensure standardised insert stocking and simple replacement. What is the effective cutting length? The effective cutting length is 31 mm, giving sufficient engagement for many through and partial-depth hole operations. Which shank size is required for clamping? Clamping is designed around a 16 mm shank diameter with a 45 mm clamping length for secure fixation in compatible toolholders. Is this tool suitable for machining steel? Yes, the tool body is intended for steel machining, with geometry and construction aimed at stable cutting and reliable chip control. What is the article number for ordering and reference? Order or reference the tool by article number U32TM, Teknik Makina. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust indexable solution that combines repeatable hole quality and straightforward maintenance: the drill’s Ø11 mm cutting diameter and 33 mm effective cutting length ensure consistent performance, while the 16 mm shank and 45 mm shank length provide rigid clamping and reduced run-out. Order the solid drill directly via Metav Werkzeuge or ask our consultants if needed. Vollbohrer U34TM – Indexable insert drill, Ø11 mm, compatible with Taegutec inserts by Teknik Makina Vollbohrer U34TM is an indexable insert drill designed for stable, repeatable drilling with replaceable inserts, suitable for machining setups that require quick insert changes and consistent hole quality. Ø 11.00 mm cutting diameter 33 mm effective cutting length 16 mm solid shank with 45 mm shank length Compatible with XCGT 050204 inserts by Taegutec Higher repeatability through rigid shank and defined cutting length The U34TM delivers improved hole repeatability thanks to a 16 mm solid shank that reduces deflection under load and a precisely defined 33 mm cutting length that limits contact to the tool’s designed working zone. This configuration supports stable chip formation and consistent tool engagement, which is particularly beneficial in batch production or when tight positional tolerances are required. The reduced risk of run-out translates into fewer rejected parts and lower rework effort, giving a tangible productivity advantage on the shop floor. Cost effectiveness via replaceable indexable inserts By accepting the XCGT 050204 indexable insert, the drill separates cutting geometry from the tool body, enabling quick insert changes without removing the holder from the machine. This design reduces downtime and tooling expenditure over time: worn cutting edges are replaced, not entire drills. The compatibility with Taegutec inserts provides access to a wide range of proven grades and geometries, allowing selection of the insert best suited to the actual machining task. Cleaner inventory management and faster set-up cycles are direct operational benefits of this approach. Practical integration and workshop convenience With an overall length of 92 mm and a modest weight of 0.112 kg, this indexable drill is compact enough for common holder setups while providing the working reach expected from an industrial tool. The Ø11 mm diameter and standard 16 mm shank facilitate mounting in common clamping systems and reduce the need for special adapters. For users who require additional details on mounting or insert selection, Metav’s technical team is available to advise on the optimal insert grade and clamping method for the intended application. For tailored advice or to secure stock from Metav Werkzeuge’s Emmerich warehouse—trusted for rapid supply and technical support—contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 to discuss the Teknik Makina U34TM and suitable inserts Technical data Article number: U34TM Manufacturer: Teknik Makina Facts Diameter: 11 mm Overall length: 92 mm Cutting length: 33 mm Shank diameter: 16 mm Shank length: 45 mm Weight: 0.112 kg Special features Compatible inserts: XCGT 050204 Compatible insert manufacturer: Taegutec Product type: Indexable insert drill SKU: U34TM FAQ Which insert type fits this drill? The drill accepts the XCGT 050204 indexable insert; Teknik Makina specified this format for the U34TM to ensure straightforward replacements. What shank size is required for clamping? A 16 mm solid shank is provided on the U34TM, allowing secure clamping in standard 16 mm holders or suitable collet systems. What is the effective cutting length? The effective cutting length is 33 mm, which defines the working zone for repeatable hole production. Is the drill supplied with inserts? The product listing specifies compatibility with XCGT 050204 inserts; check the product offer for whether inserts are included or sold separately. Can the U34TM be used in automated tool changers? With a compact overall length of 92 mm and a standard 16 mm shank, the U34TM is suitable for many tool-changing systems; confirm holder compatibility for the specific machine interface. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com