XCMT 050204 Indexable Insert for Stainless Steel - MetavCUT

Take advantage of a compact, insert-compatible drilling solution that combines productive changeover, consistent hole quality and straightforward workshop stocking. With a 10.5 mm cutting diameter and compatibility with Korloy XCMT 050204 inserts, the tool supports efficient cycle times and repeatable results — order the indexable insert drill directly via Metav Werkzeuge or ask our consultants if needed. Indexable insert drill U14TM — Ø 10.5 mm, Korloy XCMT-compatible The indexable insert drill U14TM is a purpose-built drill body for CNC and manual drilling operations, engineered to accept Korloy XCMT 050204 inserts for reliable, repeatable hole production in general engineering environments Diameter 10.5 mm for precise holemaking Compatible with Korloy XCMT 050204 inserts 16 mm shank for secure clamping 90 mm overall length for deep reach Reduce cycle times with standard insert compatibility The U14TM is designed to speed up machining through rapid insert replacement and predictable chip control. With a 10.5 mm nominal diameter and acceptance of the widely used XCMT 050204 insert form, changeovers become a routine task rather than a production interruption. The use of recognised insert formats shortens setup time and simplifies inventory management, delivering a measurable improvement in throughput for small-batch and repeat production alike. Stable clamping and consistent bore quality A robust 16 mm shank and a 45 mm effective shank length combine to provide secure clamping and low runout, which helps maintain concentricity and dimensional accuracy. The 31 mm cutting length balances material engagement with chip evacuation to reduce vibration and improve surface finish. These dimensional choices make the tool a dependable option when consistent hole tolerances and reproducible finishes are required across multiple components. Practical workshop advantages and stock efficiency The compact 90 mm overall length and light construction support flexible fixturing and easier tool handling at the bench or on the machine. Compatibility with Korloy inserts reduces the number of different spare parts carried in stock while preserving cutting performance through reliable insert geometry. For workshops seeking pragmatic solutions, the drill body delivers straightforward maintenance, rapid insert swaps and predictable life cycles — advantages that translate into less downtime and lower indirect costs. For precision drilling backed by Teknik Cutting Tools' engineering and stock handled by Metav Werkzeuge, request availability or tailored advice from Metav Werkzeuge in Emmerich to ensure the U14TM matches specific machine and application requirements Technical data SKU: U14TM Manufacturer: Teknik Makina Designation: Indexable insert drill body Numbers / Core technical data Diameter: 10.5 mm Cutting length: 31 mm Shank diameter: 16 mm Shank length: 45 mm Overall length: 90 mm Weight: 0.111 kg Special features Compatible insert: XCMT 050204 Compatible insert manufacturer: Korloy Designed for indexable insert drilling FAQ What insert does the drill accept? The drill accepts XCMT 050204 indexable inserts; the U14TM is configured for this common insert size. What is the shank diameter and how is it clamped? The U14TM has a 16 mm shank, intended for secure clamping in appropriate toolholders and collets to minimise runout. What hole depth can be reached with this tool? With an overall length of 90 mm and a cutting length of 31 mm, the tool is suitable for moderate-depth drilling within the stated dimensions. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Secure, economical drilling for small-diameter production: the combination of a 10 mm cutting diameter, a 16 mm shank and a 30 mm cutting length gives repeatable hole quality with minimal tool changes. Order the tool via Metav Werkzeuge or consult the Metav team for application advice and reliable supply. Indexable Insert Drill Body U12TM — 10 mm, 16 mm shank (Teknik Makina) The Indexable Insert Drill Body U12TM is a compact drilling solution for precision small-hole work, designed to accept standard indexable inserts for efficient metalworking applications. 10 mm nominal diameter for tight holes Compatible with XCMT 050204 inserts 16 mm shank for secure clamping 30 mm cutting length for controlled depth Consistent hole quality for serial production The U12TM is engineered for stable machining in repetitive drilling operations. With a 10 mm nominal diameter and 30 mm cutting length, the tool provides a predictable cutting engagement that supports consistent cycle times and reduces scrap. The indexable-insert concept separates the economics of the cutting edge from the body: when an insert reaches its service life, only the insert is changed, which lowers long-term tooling costs and keeps machining downtime to a minimum. This focus on predictable output and rapid servicing suits workshop and small-series production alike. Rigidity and clamping reliability for accurate positioning A 16 mm shank and an overall length of 90 mm combine to give a balanced tool geometry that minimises chatter and runout in most standard drilling set-ups. The relatively low mass of 0.109 kg means reduced spindle load while maintaining the stiffness required for true-to-diameter holes. The 45 mm shank engagement length supports secure clamping in standard collets and holders; the result is improved repeatability and fewer rework cycles through better positional accuracy. Economical insert system and simplified maintenance This drill body is specified for XCMT 050204 inserts and is compatible with inserts from Korloy, enabling access to widely available, industry-standard cutting grades. Indexable inserts deliver the practical benefit of instant edge renewal — a worn corner is replaced in seconds without regrinding — which reduces overall tooling expenditure and keeps machines running. For buyers seeking predictable running costs, the separation of body and insert is a rational, cost-conscious choice that supports continuous production. Easy integration into tooling inventories With the unambiguous SKU U12TM and standardised interface dimensions, this drill body fits into common tooling systems and procurement workflows. The compact overall length and standard shank diameter ease storage and handling, simplifying stock planning for maintenance and production teams. As a documented component with clear insert compatibility, it supports efficient spare-part management and rapid replacement cycles in the workshop environment. Contact Metav Werkzeuge for ordering and application support on the Teknik Cutting Tools U12TM indexable insert drill body — call +49 2822 7131930 or email info@metav-werkzeuge.com for local stock and expert advice Technical data Article number: U12TM Manufacturer: Teknik Makina Product name: Indexable Insert Drill Body Diameter: 10 mm Overall length: 90 mm Cutting length: 30 mm Shank diameter: 16 mm Shank length: 45 mm Weight: 0.109 kg Compatible insert type: XCMT 050204 Compatible insert manufacturer: Korloy Tool type: indexable insert drill body FAQ Which insert type is required for this drill body? The U12TM drill body is designed for XCMT 050204 indexable inserts; Korloy grades are a listed match for reliable performance. How does the shank size affect machining stability? The 16 mm shank provides sufficient clamping engagement for typical toolholders, increasing rigidity and reducing runout compared with undersized shanks in similar-length tools. What are the key dimensions to check when replacing this tool in a holder? Check the 16 mm shank diameter, the 90 mm overall length and the 45 mm shank engagement length to ensure correct seating and clamping in the holder. Can inserts be replaced on the machine or is removal required? Indexable inserts for this drill body are replaced directly on the tool body; the process is quick and avoids the need for body removal from the machine in most maintenance routines. Is the U12TM suitable for stock management in a production environment? Yes, the clear SKU (U12TM), standardised insert type and compact footprint make this drill body straightforward to stock and rotate as part of a production tooling strategy. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com