Ethernet USB RS-232 Digital Load Transmitter 10 Hz, Plastic Housing, USB Power - KERN

Take advantage of the reliable combination of wireless connectivity and seamless integration for uninterrupted weighing workflows; benefit from rapid dispatch and Metav Werkzeuge's expertise when choosing this interface. KERN YKV-A01 Wi‑Fi interface for weighing systems — reliable wireless connectivity for scales The KERN YKV-A01 is a Wi‑Fi interface for weighing systems, designed to enable wireless data transfer and straightforward integration with laboratory and industrial scales. Wireless data transfer for weighing systems Stable connection for continuous measurements Easy integration with laboratory and industrial scales Rapid dispatch from Metav Werkzeuge Ensure continuous data flow with wireless integration The KERN interface converts a scale's output into a wireless stream, reducing manual logging and supporting automated workflows. By replacing serial or USB-only connections with a Wi‑Fi link, measurement data can be routed directly to networked PCs, databases or data-collection systems, improving process efficiency and traceability. This integration lowers the risk of transcription errors and speeds up data handling, which is particularly valuable in high-throughput or regulated environments where consistent recording is essential. Fast installation and dependable operation for daily use Designed as an accessory for established weighing devices, the interface focuses on reliability and uncomplicated setup. The straightforward connection approach minimises downtime during installation and supports uninterrupted measurement tasks once configured. Stable wireless performance ensures that continuous weighing processes remain accurate without frequent reconnections, so production and laboratory teams can maintain throughput and quality with minimal supervision. A practical choice for precision-focused workshops and labs As a dedicated accessory for scales, this Wi‑Fi interface complements existing measurement equipment and supports digital workflows in both industrial and laboratory settings. Procuring the interface through Metav Werkzeuge brings the advantage of a precision-oriented supplier that combines extensive range and dependable logistics. For operations aiming to modernise their data acquisition while keeping implementation practical and cost-effective, this accessory presents a focused solution that aligns with professional measuring routines. Choose the KERN Wi‑Fi interface for secure wireless weighing integration — contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and rapid dispatch Technical data Article number: YKV-A01 Manufacturer: KERN GTIN: 4045761228917 Country of origin: CN Tariff code: 90160090 Facts GTIN: 4045761228917 Tariff code: 90160090 Weight (kg): 0 eClass: 19050112 Special features Function: Wi‑Fi interface for weighing systems Application: Accessory for scales Distribution: Available via Metav Werkzeuge with rapid dispatch FAQ How does the interface transfer measurement data? The KERN YKV-A01 uses a Wi‑Fi connection to transmit measurement values from compatible scales to networked systems for centralised data collection. Which scales can work with this Wi‑Fi interface? Compatibility depends on the scale's communication ports and protocols; the interface is intended for use as an accessory with industrial and laboratory weighing systems. Is the product identifiable for ordering and inventory? Yes, the interface is listed under SKU YKV-A01 and GTIN 4045761228917 for clear identification. Can the interface support continuous measurement workflows? The device is designed to provide a stable wireless link suitable for ongoing weighing tasks and continuous data transfer. KERN — Country of origin: CN

Take advantage of Bluetooth connectivity and straightforward integration to modernise data capture from scales, while benefiting from Metav Werkzeuge’s central supply and rapid dispatch from Emmerich; order the interface directly via Metav Werkzeuge or consult our specialists for implementation advice. YKV-A02 Bluetooth data interface for weighing systems — KERN The YKV-A02 is a Bluetooth data interface designed for integration with weighing systems, enabling wireless transfer of measurement data from scales into downstream processing and logging solutions. Bluetooth interface for weighing systems Plug-and-play integration with scales Compact industrial housing Rapid dispatch from Emmerich warehouse Faster, more reliable data transfer for production workflows The integration of Bluetooth connectivity removes the need for manual entry and physical cables, which reduces transcription errors and speeds up data capture. As a dedicated interface for weighing systems, the device supports steady transmission of measurement results to collection software or mobile devices, improving traceability and auditability in production and quality-control processes. This leads to measurable efficiency gains where repeated measurements are required and documentation must be dependable. Straightforward installation and retrofit capability Engineered for use with industrial scales, the wireless interface is intended for rapid installation and minimal configuration, making it suitable for retrofitting existing equipment without major system changes. The compact form factor conserves bench space and simplifies mounting, while the interface’s role as a dedicated data bridge means that integration focuses on data flow, not mechanical alterations. For workshops and production lines seeking minimal downtime, this approach supports quick commissioning and sustained productivity. Built for consistent operation in industrial contexts Designed as an accessory for weighing applications, the interface emphasises stable connections and predictable behaviour under routine use. The solution supports consistent data delivery from measurement devices to evaluation systems, which helps maintain production records and supports compliance routines. By prioritising functional reliability over feature bloat, the device offers a clear technical advantage where consistent, repeatable measurement reporting is essential. Supply reliability and the Metav assurance Sourcing through Metav Werkzeuge in Emmerich provides access to a broad range of measurement technology and workshop supplies from a single, trusted partner. Metav’s stock management and distribution model focus on dependable availability and straightforward order fulfilment for industrial customers. Choosing equipment distributed via Metav reduces supplier count and simplifies procurement chains, which benefits purchasing departments and operational planners alike. For wireless integration of KERN weighing systems, request the YKV-A02 from Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 for personalised advice and supply details Technical data SKU: YKV-A02 Manufacturer: KERN GTIN: 4045761228924 eCl@ss: 19050110 Tariff number: 90160090 Country of origin: CN Core data Weight: 0 kg Category path: Waagen › Zubehör Asset file: YKV-A02-main.jpg Special features Function: Bluetooth data interface for weighing systems Intended use: integration with scales Distributor: Metav Werkzeuge (stock and dispatch in Emmerich) FAQ Is the interface compatible with KERN scales and other manufacturers' indicators? The device is specified as a Bluetooth data interface for weighing systems; compatibility with specific indicators depends on the supported serial or protocol formats and must be checked against the weighing indicator’s documentation. How is data transmitted from the interface to other systems? Data is transmitted wirelessly via Bluetooth so that measurement values can be forwarded to compatible collection software or mobile devices for logging and processing. Can the interface be retrofitted to existing scales without mechanical changes? The interface is intended as a retrofit accessory for scales and is designed to minimise mechanical alterations by functioning as a data bridge rather than requiring physical modification of the weighing instrument. Are implementation details such as supported Bluetooth profiles and setup instructions available? Technical documentation accompanying the product contains the precise communication profiles and configuration steps required for integration into measurement and IT systems. What are the recommended applications for this Bluetooth interface? Typical applications include production lines, quality control stations and laboratories where wireless transfer of weighing results increases workflow efficiency and traceability. Manufacturer: KERN — Distributor and contact: Metav Werkzeuge, Emmerich; Email: info@metav-werkzeuge.com; Tel: +49 2822 7131930

Take advantage of a dependable RS-232 connection and a practical 1.5 m cable length to integrate weighing equipment into existing data workflows with minimal effort; combine reliability and straightforward installation for uninterrupted measurement logging. Order the interface cable directly via Metav Werkzeuge or consult our advisors for application guidance. KERN RS-232 interface cable 572-926 — RS-232 connection, 1.5 m cable The KERN RS-232 interface cable 572-926 is a dedicated accessory for scales and weighing systems that enables stable serial data transfer between instruments and computers. RS-232 interface for reliable data transfer Cable length 1.5 m for flexible placement Accessory for scales and weighing systems Seamless data transfer for weighing workflows The RS-232 connection provides a proven, low-latency way to export measurement values from a scale to a PC, printer or data logger. With a 1.5 m cable length the lead offers practical reach across a bench or workstation without excess slack, simplifying cable routing. As an accessory designed for weighing equipment, the cable reduces interruptions in data acquisition and supports continuous logging processes, which is particularly useful where serial output remains the standard for industrial metrology. The compact design and light weight contribute to simple handling and less strain on instrument ports. Robust serial interface explained for practical use The serial standard implemented by this cable is valued for its stability in industrial and workshop environments. Unlike many casual consumer connections, RS-232 maintains clear signal levels over short runs and is tolerant of typical workshop interference when properly installed. The cable serves as a direct link for numeric transfer and simple control messages, enabling automated data capture or label printing without complex network configuration. Where reliable point-to-point communication is required, this interface cable provides a technically straightforward solution that integrates with legacy and contemporary weighing equipment alike. Practical benefits that support uptime and workflow Lightweight construction and a focused specification minimise installation time and downtime during equipment setup or replacement. The cable’s specification suits regular workshop use and makes it easier to standardise interfaces across a fleet of scales. Purchasing via Metav Werkzeuge brings the additional assurance of curated product selection and centralised supply: Metav combines decades of precision expertise with extensive stockholding to support reliable deliveries to the shop floor. For procurement, the compact packing and predictable compatibility help keep logistics simple and maintenance predictable. Contact Metav Werkzeuge to arrange supply of the KERN RS-232 interface cable 572-926 and to discuss integration options for existing weighing systems Technical data Article number: 572-926 Manufacturer: KERN GTIN: 4045761245211 Country of origin: CN Tariff code: 84239010 Numbers / Core technical data Weight: 0.08 kg Cable length: 1.5 m SKU: 572-926 Special features RS-232 serial interface Accessory for scales (weighing systems) Category: Scales, accessories FAQ What type of interface does this cable provide? The cable provides an RS-232 serial interface suitable for point-to-point data transfer from scales to computers or printers. What is the cable length and how flexible is it for workshop use? The cable length is 1.5 m, offering practical reach for bench-top installations and tidy routing in workstations. Is this cable suitable for KERN weighing instruments? Yes, the cable is a KERN accessory (SKU 572-926) designed to connect with weighing equipment that features an RS-232 output. Can the cable be used for continuous data logging? The RS-232 connection supplied by this cable supports reliable numeric data transfer and is suitable for straightforward continuous logging setups. Manufacturer: KERN — Origin: China. Dealer and contact: Metav Werkzeuge, Emmerich am Rhein. Email: info@metav-werkzeuge.com, Phone: +49 2822 7131930

The compact design and reliable fit make this mounting solution ideal for tidy instrument panels and rapid retrofit tasks; it combines quick installation and stable support with extremely low weight. Take advantage of a space-saving DIN-rail attachment and straightforward compatibility. Order the mounting bracket directly via Metav Werkzeuge or ask our consultants if needed. Mounting bracket YKV-A03 (for DIN rail) — KERN, compact design Mounting bracket YKV-A03: a compact DIN-rail mount for secure attachment of scale indicators and accessories in industrial weighing systems. DIN-rail mounting bracket for scales Compatible with KERN accessories Compact design, only 0.05 kg Space-saving support that speeds up panel work The DIN rail mounting solution provides a compact alternative to panel holes and customised fixtures, enabling faster equipment changes and neater cable routing. Thanks to its lightweight construction, the bracket reduces load on mounting rails while delivering consistent stability for attached indicators and modules. In practice, this reduces time spent on mechanical adjustments during installation and maintenance, contributing to higher uptime in production or laboratory environments. Designed for standard industrial rails and weighing equipment Engineered for use with standard DIN-rail systems, the mount offers a reliable interface between weighing electronics and control panels without requiring bespoke adaptors. The simple clip-fit concept accelerates assembly and replacement procedures; technicians can secure indicators and ancillary devices quickly, which supports efficient workflows and lowers process interruption times. The component was developed as a practical accessory for industrial weighing applications and compatible scale setups. Practical benefits for workshops and production lines By keeping the attachment compact and focused on core functionality, the component helps conserve panel space and simplifies equipment upgrades. The solution supports modular system layouts, so additional instruments can be added or replaced with minimal mechanical work. Sourcing through an established distributor ensures traceable supply and consistent quality standards, which helps procurement teams maintain a predictable parts catalogue and reduces the need for multiple suppliers. For enquiries or to secure supply of this KERN DIN-rail mounting bracket, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930; specialists are available to advise on compatibility and delivery. Technical data Article number: YKV-A03 Manufacturer: KERN SKU: YKV-A03 GTIN: 4045761228900 ECLASS: 21029090 Tariff number: 90160090 Weight: 0.05 kg Description: Mounting bracket for DIN rail Categories: Waagen > Zubehör Origin country: CN Image: https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/ab/55/fa/62/62fa55abc6bb3c5389f1dfcf/YKV-A03-main.jpg FAQ Is this bracket compatible with standard DIN-rail systems? The mounting bracket YKV-A03 is designed for standard DIN-rail installation and provides a secure interface for scale indicators and related accessories. Can the bracket support common scale indicators used in workshops? Yes. The YKV-A03 bracket from KERN is intended for use with weighing equipment accessories and offers stable attachment for typical indicator modules. How much does the bracket weigh and does that affect rail load? The bracket weighs 0.05 kg; its low weight minimises additional load on the DIN rail while still providing reliable support. Where is the bracket manufactured? The KERN mounting bracket YKV-A03 is marked with origin CN. Metav Werkzeuge, Emmerich am Rhein • info@metav-werkzeuge.com • +49 2822 7131930