50-75mm Precision Micrometer 0.001mm Resolution, Ratchet, ISO 17025 Calibration Certificate - Microtech Metrology
€119.00
Product information "50-75mm Precision Micrometer 0.001mm Resolution, Ratchet, ISO 17025 Calibration Certificate - Microtech Metrology"
Combine 1 µm resolution, ISO 17025 traceability and a ratchet-controlled measuring force to secure reproducible external measurements; this micrometer offers reliable results for workshop and laboratory use. Order directly via Metav Werkzeuge or contact our consultants for technical advice.
Micrometer (50–75 mm) by Microtech Metrology – 1 µm resolution, ISO 17025 calibrated
The micrometer is a precision external measuring instrument for workshop and laboratory use across the 50–75 mm range, designed for reproducible readings and quality assurance tasks
- 1 µm resolution for sub-micron checks
- ISO 17025 calibration certificate included
- Friction thimble and ratchet stop for repeatability
- Analogue design with ±0.003 mm accuracy
Measurable certainty through certified calibration
The combination of 1 µm resolution and a documented calibration workflow gives measurable certainty where tolerances matter. Supplied fully calibrated to ISO 17025, the instrument arrives with a traceable certificate that supports quality records and audit trails. This eliminates start‑up downtime for incoming inspection and accelerates integration into existing measurement routines, providing a verifiable baseline for process capability studies and corrective action documentation.
Repeatable contact and ergonomics for operator consistency
A friction thimble paired with a ratchet stop minimises variation from human force, so each exterior dimension is taken under a consistent measuring pressure. The analogue spindle and contact geometry—including an anvil diameter of Ø6.5 mm—are optimised for firm seating on shafts and rings, delivering a stated accuracy of ±0.003 mm. The mechanical design reduces rework by limiting operator-induced scatter, making the gauge a dependable tool for both spot checks and series inspections.
Robust analogue design for everyday workshop use
Built as an analogue external micrometer, this instrument balances precision with simplicity: it needs no batteries and requires minimal maintenance while remaining suitable for workshop and calibration-laboratory environments. The 50–75 mm measuring range covers a broad share of common components, keeping handling straightforward and measurement time low. Supplied with a ratchet and calibration certificate, the device is ready for immediate metrological use and systematic quality control.
For traceable, high-precision external measurement choose the Microtech Metrology micrometer supplied and certified by Metav Werkzeuge—contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 for ordering and technical consultation
Technical data
- SKU: 110110750
- GTIN: 4061905456787
- Manufacturer: Microtech Metrology
Numbers / Core technical data
- Measuring range: 50–75 mm
- Resolution: 0.001 mm
- Accuracy: ±0.003 mm
- Anvil diameter: Ø6.5 mm
Special features
- Analogue reading, friction thimble
- Ratchet stop for constant measuring force
- Supplied with ISO 17025 calibration certificate
- Category: External micrometer
FAQ
How accurate is the micrometer in practice?
The Microtech Metrology micrometer (SKU 110110750) provides a resolution of 0.001 mm and a stated accuracy of ±0.003 mm, suitable for demanding workshop and laboratory applications.
Is the instrument ready for traceable measurement after delivery?
Yes. The micrometer from Microtech Metrology is delivered fully calibrated with an ISO 17025 calibration certificate, enabling immediate traceability and audit-ready documentation.
Which tasks is this micrometer best suited for?
The micrometer covers external measurements of shafts, rings and similar components in the 50–75 mm range and is suitable for routine shop-floor checks as well as laboratory quality control work.
How does the ratchet stop affect measurement results?
The ratchet stop ensures a consistent measuring force; with the friction thimble it reduces operator-induced variation, improving repeatability for successive external measurements taken with the micrometer.
Is this an analogue or digital instrument and can it be used in quality control?
This is an analogue micrometer with a precision thimble and ratchet; supplied with ISO 17025 calibration, it is fully suitable for quality control procedures and documentation.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
Take advantage of direct, driver‑free data capture and simple one‑press recording to speed up measurement workflows; the cable’s USB HID interface and 2 m length ensure flexible integration with existing inspection software. Order this accessory through Metav Werkzeuge or consult the Metav team for compatibility advice. USB HID Data Cable – for Certi Met Digital Calipers and Indicators (Microtech Metrology) USB HID Data Cable enables direct keyboard‑style transfer of measurement values from Certi Met instruments into customer applications, ideal for production and inspection environments. USB HID for direct keyboard-style data transfer Integrated data button for one-press capture 2 m cable length for flexible workstation use Compatible with Certi Met digital calipers and indicators Faster, error‑resistant data capture for quality control The USB HID interface provides a driver‑free, keyboard‑emulation connection that sends measurement values directly into spreadsheets and inspection software, removing manual transcription. The integrated data button offers immediate, single‑action capture and reduces the risk of typing errors or transcription delays. For routine quality control tasks and statistical process control, this reliable signal path shortens cycle times while maintaining traceable digital records. The design is focused on measurable productivity gains rather than decorative extras. Robust connection tailored to metrology workflows Engineered as an accessory for industry‑grade measuring instruments, the connection lead is specified for use with Certi Met digital calipers and digital indicators rated to IP54, ensuring compatibility with workshop conditions where splash and dust resistance matter. The 2 m length provides practical reach between inspection benches and PC terminals without compromising cable management. The interface operates in standard HID mode, meaning no special drivers are required on the host system, which simplifies deployment across multiple stations and reduces IT overhead. Simple integration into existing data chains The cable’s keyboard emulation makes it compatible with legacy systems and modern applications alike: captured figures appear where the cursor is placed, enabling straightforward input to spreadsheets, measurement logs or custom software. The accessory supports a single‑button workflow for rapid series capture and is particularly suitable for production lines, inspection benches and maintenance stations where repeated measurement logging is needed. By converting manual entry into automated keystrokes, the accessory contributes to higher data integrity and a more efficient measurement routine. For seamless integration with Microtech Metrology Certi Met instruments, contact Metav Werkzeuge to confirm compatibility and order the correct cable; Metav’s team in Emmerich can advise on stock and delivery via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 141083000 GTIN: 4061905452697 Data output: USB‑HID Manufacturer: Microtech Metrology Specifications Cable length: 2 m Buttons: 1 (data capture) Special features Direct keyboard‑style data transfer Integrated data button for immediate capture Compatible with Certi Met digital calipers and indicators (IP54) HID keyboard mode for driver‑free operation Suited for input into spreadsheets and standard inspection software FAQ Is this cable compatible with all Certi Met digital instruments? The cable is designed for Certi Met digital calipers and Certi Met digital indicators (both IP54 rated); compatibility with other models should be checked against the instrument's interface specifications. Does the connection require special drivers? No special drivers are required: the USB HID Data Cable operates in keyboard (HID) mode, so captured values are sent as standard keystrokes to the host application. Can the cable be used with custom measurement software? Yes, provided the software accepts keyboard input; the USB HID Data Cable transmits values to whichever field is active, allowing integration with bespoke or commercial inspection programs. What is the effective cable length and does it support bench setups? The lead is 2 m long, offering practical reach for typical bench and workstation layouts while keeping cable routing manageable. What is the article number for ordering or inventory? The article number (SKU) for this Microtech Metrology USB HID data cable is 141083000. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools