75-100mm Outside Micrometer Ratchet Stop, 0.003mm Accuracy, ISO 17025 Cal Cert - Microtech Metrology
€73.00
Product information "75-100mm Outside Micrometer Ratchet Stop, 0.003mm Accuracy, ISO 17025 Cal Cert - Microtech Metrology"
Combine the consistent measuring force of the ratchet stop, traceable verification via the ISO 17025 calibration certificate and the ±0.003 mm accuracy to ensure reproducible, shop-floor and laboratory results; order the micrometer directly via Metav Werkzeuge or contact our consultants for application advice.
Microtech Metrology Micrometer 75–100 mm with Ratchet Stop
Microtech Metrology Micrometer (75–100 mm) is a precision instrument for accurate external measurements in quality control and fine mechanical workshops.
- High accuracy ±0.003 mm
- Ratchet stop for consistent contact
- ISO 17025 calibration certificate included
- Measuring range 75–100 mm
Precision where reproducibility counts
The compact micrometer delivers a documented measurement chain: an accuracy of ±0.003 mm combined with a reading increment of 0.01 mm gives a clear balance between fine resolution and robust industrial use. The integrated ratchet stop controls measuring force and reduces operator-induced deviation, which is especially valuable when several operators perform the same checks. The solid contact face (anvil Ø6.5 mm) ensures repeatable seat and helps to avoid local deformation on delicate parts.
Traceable calibration for quality assurance
Calibration to ISO 17025 is supplied with the instrument, so results are immediately traceable and suitable for accredited test routines. The included calibration certificate (ILAC‑MRA) documents conformity and simplifies integration into a laboratory’s quality management system. For production monitoring or incoming inspection, this traceability removes an administrative hurdle and supports decision-making with verified measurement data.
Designed for workshop and laboratory workflows
With a measuring range of 75–100 mm, this micrometer sits in the compact-to-standard segment and is therefore well suited to precision work on components such as housings, shafts and machined fittings. The analogue design provides tactile feedback that many technicians prefer for tactile feel and quick checks; the ratchet head aids consistent contact when performing repetitive measurements. The instrument is robust enough for regular workshop use yet precise enough for bench testing.
Contact Metav Werkzeuge today to request further technical details or to secure the Microtech Metrology micrometer (75–100 mm) with ISO 17025 calibration and traceable documentation.
Technical data
- Article number: 110111001
- GTIN: 4061905459146
- Manufacturer: Microtech Metrology
Facts
- Measuring range: 75–100 mm
- Resolution / reading: 0.01 mm
- Accuracy: ±0.003 mm
- Anvil diameter: Ø6.5 mm
Special features
- Ratchet stop micrometer head
- Analogue (mechanical) instrument
- ISO 17025 calibration certificate included (ILAC‑MRA)
FAQ
What is the declared accuracy of this micrometer?
The micrometer by Microtech Metrology is specified with an accuracy of ±0.003 mm.
Is a calibration certificate supplied with the instrument?
Yes, the product is delivered with an ISO 17025 calibration certificate, confirming traceability and documented results.
Which measuring range does the micrometer cover?
The instrument covers the measuring range 75–100 mm, suitable for compact to standard components.
Does the micrometer include a ratchet stop?
Yes, the micrometer is equipped with a ratchet stop to ensure consistent measuring force and repeatable contact.
How is the micrometer best used in a quality-control workflow?
Use the Microtech Metrology micrometer for reproducible external measurements during incoming inspection or production control; the ISO 17025 certificate supports formal test records.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
Combining USB HID keyboard emulation, one‑button data transmission and a 2 m lead, this cable speeds up measurement capture while reducing manual entry errors and boosting traceability. Order the USB HID data cable directly via Metav Werkzeuge or contact our consultants for compatibility checks and procurement advice. USB HID data cable for Microtech Certi Met calipers and indicators — 2 m, one‑button USB HID data cable is a compact connection lead for feeding readings from digital calipers and indicators directly into PC applications, ideal for workshop and inspection environments. USB HID interface for direct keyboard input 2 m cable length for flexible workstation reach One‑button data transmission for fast capture Faster capture, fewer transcription errors The USB HID interface enables direct data transfer by emulating a keyboard, so measurement values are sent as keystrokes to spreadsheets, measurement software or inspection forms. This reduces manual retyping and common transcription mistakes, increasing throughput in repetitive measuring tasks. The single‑press send function ensures each measurement is recorded consistently, which simplifies logging and supports a smoother quality‑control workflow. Practical reach and robust connection on the shop floor With a 2 m lead, the connection provides practical reach between handheld instruments and desktop PCs or laptops without the need for adapters. The cable is specified for use with Certi Met digital calipers and indicators that carry an IP54 rating, which suits typical production and workshop conditions where splash and dust resistance are required. The durable connector and strain relief are designed for regular use, keeping data transmission reliable during daily measuring routines. Plug‑and‑play integration with existing apps Emulating a keyboard means no special drivers are required for most systems; the device is recognised as a HID input device and sends values directly to the active cursor position. This plug‑and‑play behaviour supports rapid integration with inspection templates and standard office software, reducing IT overhead and speeding up deployment on the shop floor. For processes that demand fast measurement cycles, the lead streamlines data capture and reduces administrative latency. Clear benefits for traceability and efficiency By automating the transfer of readings, the cable supports traceability chains and frees operator time for value‑added tasks. The one‑button transmission improves consistency in capture routines and helps to maintain a clear audit trail when measurements are recorded into digital records. This makes the lead a practical accessory for quality managers seeking dependable, low‑complexity data acquisition without system reconfiguration. Contact Metav Werkzeuge to secure the Microtech USB HID cable and confirm compatibility with existing Certi Met instruments; technical procurement advice and fast delivery from Emmerich are available Technical Data Article number: 141083000 GTIN: 4061905452697 Data output: USB‑HID Cable length: 2 m Manufacturer: Microtech Metrology Facts Compatible with Certi Met digital calipers IP54 Compatible with Certi Met digital indicators IP54 HID mode (keyboard emulation) One‑button data send Special features Direct data transfer to apps and spreadsheets Designed for professional workshop use Durable connector with strain relief Intended for use with Certi Met Digital instruments FAQ How does the cable transfer measurement values to a PC? The cable uses USB HID keyboard emulation so values are sent as keystrokes directly into the active field of applications; the Microtech USB HID cable requires no special drivers for standard systems. Is the lead compatible with all Certi Met instruments? Compatibility is specified for Certi Met digital calipers and indicators with IP54 protection; confirm the instrument model if uncertain, as listed in the product documentation. Does the cable require any software to operate? No additional software is necessary for basic operation because the device functions as a HID keyboard; advanced integrations may use application‑level settings to parse incoming data automatically. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools